@arcgis/charts-components 4.34.0-next.9 → 4.34.0-next.91

package/dist/chunks/messages.vi.js

@@ -1,48 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const t = "Đã xảy ra lỗi khi tải biểu đồ.", n = "Không thể áp dụng phép biến đổi log lên giá trị âm hoặc bằng không.", h = "Không thể áp dụng phép biến đổi căn bậc hai lên giá trị âm.", a = "Đã xảy ra lỗi khi tải lớp. URL = ${ url }. ID mục cổng thông tin = ${ portalItemId }.", i = "Không tìm thấy trong lớp này các trường [${ fieldNames }] được xác định trong cấu hình.", e = "${ dataPath } phải là duy nhất. Chuỗi có tên ${ seriesName } có một ID (${ seriesID }) đã được chuỗi khác sử dụng.", c = "${ dataPath } không thể thực hiện tổng hợp không đếm trên trường không phải là số.", o = "${ dataPath } đang thiếu một tên phù hợp ${ missingProperty }.", r = "${ dataPath } không được ngắn hơn ${ limit } ký tự.", s = "${ dataPath } không được chứa dưới ${ limit } mục.", g = "${ dataPath } không được chứa nhiều hơn ${ limit } mục.", p = "${ dataPath } phải chứa ít nhất một ký tự không phải khoảng trắng.", l = "${ dataPath } không được chứa ${ additionalProperty }.", d = "${ dataPath } phải bằng một trong những giá trị được phép này: ${ allowedValues }.", u = "${ dataPath } phải khớp với lược đồ của một trong những thứ sau: ${ schemaOptions }.", m = "Biểu đồ phân tán có ký hiệu tỷ lệ không được hỗ trợ. Đã áp dụng kích cỡ ký hiệu theo mặc định.", _ = "Không thể đọc dữ liệu đầu vào.", $ = "Đ_The queryBins operation is not supported on this service______________________________ớ.", k = "Loại chuỗi mong đợi tại chỉ mục ${ seriesIndex } là '${ expectedType }' nhưng thay vào đó lại nhận được '${ receivedType }'", y = "hoặc", P = {
-  defaultError: t,
-  negativeValueInDataForLogTransformation: n,
-  negativeValueInDataForSqrtTransformation: h,
-  layerLoadFailure: a,
-  layerFieldsNotFound: i,
-  duplicateSeriesID: e,
-  nonNumericAggregation: c,
-  requiredProperty: o,
-  minLength: r,
-  minItems: s,
-  maxItems: g,
-  whiteSpacePattern: p,
-  additionalProperty: l,
-  enumValues: d,
-  anyOfValues: u,
-  bubbleChartValidateMsg: m,
-  queryError: _,
-  queryBinsNotSupported: $,
-  invalidSeriesType: k,
-  or: y
-};
-export {
-  l as additionalProperty,
-  u as anyOfValues,
-  m as bubbleChartValidateMsg,
-  P as default,
-  t as defaultError,
-  e as duplicateSeriesID,
-  d as enumValues,
-  k as invalidSeriesType,
-  i as layerFieldsNotFound,
-  a as layerLoadFailure,
-  g as maxItems,
-  s as minItems,
-  r as minLength,
-  n as negativeValueInDataForLogTransformation,
-  h as negativeValueInDataForSqrtTransformation,
-  c as nonNumericAggregation,
-  y as or,
-  $ as queryBinsNotSupported,
-  _ as queryError,
-  o as requiredProperty,
-  p as whiteSpacePattern
-};

package/dist/chunks/messages.vi2.js

@@ -1,22 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const t = { chart: "Biểu đồ", barChart: "Biểu đồ cột", lineChart: "Biểu đồ dạng đường", pieChart: "Biểu đồ hình tròn", histogram: "Biểu đồ tần suất", scatterplot: "Đ_Scatterplot____________ớ", boxPlot: "Biểu đồ hộp" }, n = { mean: "Trung bình", median: "Bình quân", sum: "Tổng", discretePercentile: "Phân vị rời rạc", minimum: "Tối thiểu", maximum: "Tối đa", variance: "Phương sai", count: "Số lượng", aggregation: "${ statistics } / ${ fieldName }", noAggregation: "Không tổng hợp" }, i = "Biểu đồ", a = "Đếm Số chuỗi", e = "Trục X", s = "Không Khả dụng", c = { start: "Chuyển sang điểm dữ liệu đầu tiên", end: "Chuyển sang điểm dữ liệu cuối cùng" }, u = {
-  chartType: t,
-  statistics: n,
-  defaultTitle: i,
-  countSeries: a,
-  xAxis: e,
-  notAvailable: s,
-  timeAggregationTypes: c
-};
-export {
-  t as chartType,
-  a as countSeries,
-  u as default,
-  i as defaultTitle,
-  s as notAvailable,
-  n as statistics,
-  c as timeAggregationTypes,
-  e as xAxis
-};

package/dist/chunks/messages.vi3.js

@@ -1,77 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const _ = "Đ_Play_________ớ", e = "Đ_Stop_________ớ", o = "Đ_Legend_____________ớ", r = "Đ_Loading_______________ớ", t = "Đ_Home_________ớ", s = "Đ_Chart___________ớ", a = "Đ_Series_____________ớ", n = "Đ_Export_____________ớ", i = "Đ_Image___________ớ", l = "Đ_Data_________ớ", d = "Đ_Print___________ớ", c = {
-  "Zoom Out": "Đ_Zoom Out_________________ớ",
-  Play: _,
-  Stop: e,
-  Legend: o,
-  "Press ENTER to toggle": "Đ_Press ENTER to toggle______________________ớ",
-  Loading: r,
-  Home: t,
-  Chart: s,
-  "Serial chart": "Đ_Serial chart_____________ớ",
-  "X/Y chart": "Đ_X/Y chart___________________ớ",
-  "Pie chart": "Đ_Pie chart___________________ớ",
-  "Gauge chart": "Đ_Gauge chart____________ớ",
-  "Radar chart": "Đ_Radar chart____________ớ",
-  "Sankey diagram": "Đ_Sankey diagram_______________ớ",
-  "Flow diagram": "Đ_Flow diagram_____________ớ",
-  "Chord diagram": "Đ_Chord diagram______________ớ",
-  "TreeMap chart": "Đ_TreeMap chart______________ớ",
-  "Sliced chart": "Đ_Sliced chart_____________ớ",
-  Series: a,
-  "Candlestick Series": "Đ_Candlestick Series___________________ớ",
-  "OHLC Series": "Đ_OHLC Series____________ớ",
-  "Column Series": "Đ_Column Series______________ớ",
-  "Line Series": "Đ_Line Series____________ớ",
-  "Pie Slice Series": "Đ_Pie Slice Series_________________ớ",
-  "Funnel Series": "Đ_Funnel Series______________ớ",
-  "Pyramid Series": "Đ_Pyramid Series_______________ớ",
-  "X/Y Series": "Đ_X/Y Series_____________________ớ",
-  Map: "Đ_Map_______ớ",
-  "Press ENTER to zoom in": "Đ_Press ENTER to zoom in_______________________ớ",
-  "Press ENTER to zoom out": "Đ_Press ENTER to zoom out________________________ớ",
-  "Use arrow keys to zoom in and out": "Đ_Use arrow keys to zoom in and out__________________ớ",
-  "Use plus and minus keys on your keyboard to zoom in and out": "Đ_Use plus and minus keys on your keyboard to zoom in and out_______________________________ớ",
-  Export: n,
-  Image: i,
-  Data: l,
-  Print: d,
-  "Press ENTER to open": "Đ_Press ENTER to open____________________ớ",
-  "Press ENTER to print.": "Đ_Press ENTER to print______________________ớ.",
-  "Press ENTER to export as %1.": "Đ_Press ENTER to export as %1_____________________________ớ.",
-  "(Press ESC to close this message)": "Đ_(Press ESC to close this message)__________________ớ",
-  "Image Export Complete": "Đ_Image Export Complete______________________ớ",
-  "Export operation took longer than expected. Something might have gone wrong.": "Đ_Export operation took longer than expected. Something might have gone wrong_______________________________________ớ.",
-  "Saved from": "Đ_Saved from_____________________ớ",
-  "Use TAB to select grip buttons or left and right arrows to change selection": "Đ_Use TAB to select grip buttons or left and right arrows to change selection_______________________________________ớ",
-  "Use left and right arrows to move selection": "Đ_Use left and right arrows to move selection_______________________ớ",
-  "Use left and right arrows to move left selection": "Đ_Use left and right arrows to move left selection_________________________ớ",
-  "Use left and right arrows to move right selection": "Đ_Use left and right arrows to move right selection__________________________ớ",
-  "Use TAB select grip buttons or up and down arrows to change selection": "Đ_Use TAB select grip buttons or up and down arrows to change selection____________________________________ớ",
-  "Use up and down arrows to move selection": "Đ_Use up and down arrows to move selection_____________________ớ",
-  "Use up and down arrows to move lower selection": "Đ_Use up and down arrows to move lower selection________________________ớ",
-  "Use up and down arrows to move upper selection": "Đ_Use up and down arrows to move upper selection________________________ớ",
-  "From %1 to %2": "Đ_From %1 to %2______________ớ",
-  "From %1": "Đ_From %1_______________ớ",
-  "To %1": "Đ_To %1___________ớ",
-  "No parser available for file: %1": "Đ_No parser available for file: %1_________________ớ",
-  "Error parsing file: %1": "Đ_Error parsing file: %1_______________________ớ",
-  "Unable to load file: %1": "Đ_Unable to load file: %1________________________ớ",
-  "Invalid date": "Đ_Invalid date_____________ớ"
-};
-export {
-  s as Chart,
-  l as Data,
-  n as Export,
-  t as Home,
-  i as Image,
-  o as Legend,
-  r as Loading,
-  _ as Play,
-  d as Print,
-  a as Series,
-  e as Stop,
-  c as default
-};

package/dist/chunks/messages.vi4.js

@@ -1,14 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const i = { percent: "Phần trăm", values: "Giá trị", standardizedValues: "Giá trị được chuẩn hóa", count: "Số lượng", aggregationOfValues: "${ aggregation } trong số các giá trị", aggregationOfFieldName: "${ aggregation } / ${ fieldName }" }, e = { aggrFieldsByCategory: "${ aggregationFields } bởi ${ category }", aggrTypeCategory: "${ aggregationType } bởi ${ category }", aggrTypeCategoryBySplitBy: "${ aggregationType } bởi ${ category } bởi ${ splitByField }", aggrTypeOfAggrFields: "${ aggregationType } của ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationType } của ${ aggregationField } bởi ${ category } bởi ${ splitByField }", aggrTypeOfAggrFieldsByCategory: "${ aggregationType } của ${ aggregationFields } bởi ${ category }", aggrFieldsByXAxisField: "${ aggregationFields } bởi ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType } bởi ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ aggregationType } bởi ${ xAxisField } bởi ${ splitByField }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationType } của ${ aggregationField } bởi ${ xAxisField } bởi ${ splitByField }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationType } của ${ aggregationFields } bởi ${ xAxisField }", distributionOfField: "Phân phối của ${ valueField }", distributionOfFields: "Phân phối của ${ valueFields }", distributionOfFieldsByCategory: "Phân phối ${ valueFields } theo ${ category }", distributionOfFieldsByCategoryAndSplitBy: "Phân phối ${ valueFields } theo ${ category } và ${ splitByField }", xAndY: "${ x } và ${ y }" }, g = { barChart: "Biểu đồ cột", lineChart: "Biểu đồ dạng đường", pieChart: "Biểu đồ hình tròn", histogram: "Biểu đồ tần suất", scatterplot: "Đ_Scatterplot____________ớ" }, a = {
-  axisLabels: i,
-  titleLabels: e,
-  chartType: g
-};
-export {
-  i as axisLabels,
-  g as chartType,
-  a as default,
-  e as titleLabels
-};

package/dist/chunks/messages.zh-CN.js

@@ -1,48 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const t = "加载图表时出错。", a = "无法向负值或零值应用对数变换。", e = "无法向负值应用平方根变换。", o = "加载图层时出错。 URL = ${ url }。 门户项目 ID = ${ portalItemId }。", s = "未在图层中找到配置中定义的字段 [${ fieldNames }]。", n = "${ dataPath } 必须唯一。 名为 ${ seriesName } 的系列具有一个 ID (${ seriesID })，此 ID 已被另一个系列使用。", r = "${ dataPath } 无法在非数值字段上执行非计数聚合。", i = "${ dataPath } 缺少名为 ${ missingProperty } 的属性。", _ = "${ dataPath } 不应短于 ${ limit } 个字符。", d = "${ dataPath } 包含的项目数量不应少于 ${ limit } 个。", c = "${ dataPath } 包含的项目数量不应多于 ${ limit } 个。", l = "${ dataPath } 必须至少包含一个空白字符。", $ = "${ dataPath } 不能有 ${ additionalProperty }。", u = "${ dataPath } 必须等于以下允许值之一：${ allowedValues }。", m = "${ dataPath } 必须与下列各项之一的方案匹配：${ schemaOptions }。", p = "包含比例符号的散点图不受支持。 已应用默认符号大小。", h = "无法读取输入数据。", P = "试_The queryBins operation is not supported on this service______________________________验.", y = "索引 ${ seriesIndex } 处的预期系列类型是 '${ expectedType }'，但接受的是 '${ receivedType }'", I = "或", g = {
-  defaultError: t,
-  negativeValueInDataForLogTransformation: a,
-  negativeValueInDataForSqrtTransformation: e,
-  layerLoadFailure: o,
-  layerFieldsNotFound: s,
-  duplicateSeriesID: n,
-  nonNumericAggregation: r,
-  requiredProperty: i,
-  minLength: _,
-  minItems: d,
-  maxItems: c,
-  whiteSpacePattern: l,
-  additionalProperty: $,
-  enumValues: u,
-  anyOfValues: m,
-  bubbleChartValidateMsg: p,
-  queryError: h,
-  queryBinsNotSupported: P,
-  invalidSeriesType: y,
-  or: I
-};
-export {
-  $ as additionalProperty,
-  m as anyOfValues,
-  p as bubbleChartValidateMsg,
-  g as default,
-  t as defaultError,
-  n as duplicateSeriesID,
-  u as enumValues,
-  y as invalidSeriesType,
-  s as layerFieldsNotFound,
-  o as layerLoadFailure,
-  c as maxItems,
-  d as minItems,
-  _ as minLength,
-  a as negativeValueInDataForLogTransformation,
-  e as negativeValueInDataForSqrtTransformation,
-  r as nonNumericAggregation,
-  I as or,
-  P as queryBinsNotSupported,
-  h as queryError,
-  i as requiredProperty,
-  l as whiteSpacePattern
-};

package/dist/chunks/messages.zh-CN2.js

@@ -1,22 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const t = { chart: "图表", barChart: "条形图", lineChart: "折线图", pieChart: "饼图", histogram: "直方图", scatterplot: "试_Scatterplot____________验", boxPlot: "箱形图" }, e = { mean: "平均值", median: "中位数", sum: "总和", discretePercentile: "离散百分比数", minimum: "最小值", maximum: "最大值", variance: "方差", count: "计数", aggregation: "第 ${ statistics } 页，共 ${ fieldName } 页", noAggregation: "无聚合" }, a = "图表", s = "技术序列", i = "X 轴", n = "不可用", o = { start: "捕捉到第一个数据点", end: "捕捉到最后一个数据点" }, c = {
-  chartType: t,
-  statistics: e,
-  defaultTitle: a,
-  countSeries: s,
-  xAxis: i,
-  notAvailable: n,
-  timeAggregationTypes: o
-};
-export {
-  t as chartType,
-  s as countSeries,
-  c as default,
-  a as defaultTitle,
-  n as notAvailable,
-  e as statistics,
-  o as timeAggregationTypes,
-  i as xAxis
-};

package/dist/chunks/messages.zh-CN3.js

@@ -1,77 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const _ = "试_Play_________验", e = "试_Stop_________验", o = "试_Legend_____________验", r = "试_Loading_______________验", t = "试_Home_________验", s = "试_Chart___________验", a = "试_Series_____________验", n = "试_Export_____________验", i = "试_Image___________验", l = "试_Data_________验", d = "试_Print___________验", c = {
-  "Zoom Out": "试_Zoom Out_________________验",
-  Play: _,
-  Stop: e,
-  Legend: o,
-  "Press ENTER to toggle": "试_Press ENTER to toggle______________________验",
-  Loading: r,
-  Home: t,
-  Chart: s,
-  "Serial chart": "试_Serial chart_____________验",
-  "X/Y chart": "试_X/Y chart___________________验",
-  "Pie chart": "试_Pie chart___________________验",
-  "Gauge chart": "试_Gauge chart____________验",
-  "Radar chart": "试_Radar chart____________验",
-  "Sankey diagram": "试_Sankey diagram_______________验",
-  "Flow diagram": "试_Flow diagram_____________验",
-  "Chord diagram": "试_Chord diagram______________验",
-  "TreeMap chart": "试_TreeMap chart______________验",
-  "Sliced chart": "试_Sliced chart_____________验",
-  Series: a,
-  "Candlestick Series": "试_Candlestick Series___________________验",
-  "OHLC Series": "试_OHLC Series____________验",
-  "Column Series": "试_Column Series______________验",
-  "Line Series": "试_Line Series____________验",
-  "Pie Slice Series": "试_Pie Slice Series_________________验",
-  "Funnel Series": "试_Funnel Series______________验",
-  "Pyramid Series": "试_Pyramid Series_______________验",
-  "X/Y Series": "试_X/Y Series_____________________验",
-  Map: "试_Map_______验",
-  "Press ENTER to zoom in": "试_Press ENTER to zoom in_______________________验",
-  "Press ENTER to zoom out": "试_Press ENTER to zoom out________________________验",
-  "Use arrow keys to zoom in and out": "试_Use arrow keys to zoom in and out__________________验",
-  "Use plus and minus keys on your keyboard to zoom in and out": "试_Use plus and minus keys on your keyboard to zoom in and out_______________________________验",
-  Export: n,
-  Image: i,
-  Data: l,
-  Print: d,
-  "Press ENTER to open": "试_Press ENTER to open____________________验",
-  "Press ENTER to print.": "试_Press ENTER to print______________________验.",
-  "Press ENTER to export as %1.": "试_Press ENTER to export as %1_____________________________验.",
-  "(Press ESC to close this message)": "试_(Press ESC to close this message)__________________验",
-  "Image Export Complete": "试_Image Export Complete______________________验",
-  "Export operation took longer than expected. Something might have gone wrong.": "试_Export operation took longer than expected. Something might have gone wrong_______________________________________验.",
-  "Saved from": "试_Saved from_____________________验",
-  "Use TAB to select grip buttons or left and right arrows to change selection": "试_Use TAB to select grip buttons or left and right arrows to change selection_______________________________________验",
-  "Use left and right arrows to move selection": "试_Use left and right arrows to move selection_______________________验",
-  "Use left and right arrows to move left selection": "试_Use left and right arrows to move left selection_________________________验",
-  "Use left and right arrows to move right selection": "试_Use left and right arrows to move right selection__________________________验",
-  "Use TAB select grip buttons or up and down arrows to change selection": "试_Use TAB select grip buttons or up and down arrows to change selection____________________________________验",
-  "Use up and down arrows to move selection": "试_Use up and down arrows to move selection_____________________验",
-  "Use up and down arrows to move lower selection": "试_Use up and down arrows to move lower selection________________________验",
-  "Use up and down arrows to move upper selection": "试_Use up and down arrows to move upper selection________________________验",
-  "From %1 to %2": "试_From %1 to %2______________验",
-  "From %1": "试_From %1_______________验",
-  "To %1": "试_To %1___________验",
-  "No parser available for file: %1": "试_No parser available for file: %1_________________验",
-  "Error parsing file: %1": "试_Error parsing file: %1_______________________验",
-  "Unable to load file: %1": "试_Unable to load file: %1________________________验",
-  "Invalid date": "试_Invalid date_____________验"
-};
-export {
-  s as Chart,
-  l as Data,
-  n as Export,
-  t as Home,
-  i as Image,
-  o as Legend,
-  r as Loading,
-  _ as Play,
-  d as Print,
-  a as Series,
-  e as Stop,
-  c as default
-};

package/dist/chunks/messages.zh-CN4.js

@@ -1,14 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const e = { percent: "百分比", values: "值", standardizedValues: "标准化值", count: "计数", aggregationOfValues: "值的 ${ aggregation }", aggregationOfFieldName: "第 ${ aggregation } 页，共 ${ fieldName } 页" }, g = { aggrFieldsByCategory: "${ aggregationFields }，类别：${ category }", aggrTypeCategory: "${ aggregationType }，类别：${ category }", aggrTypeCategoryBySplitBy: "${ aggregationType }，类别：${ category }，分割依据：${ splitByField }", aggrTypeOfAggrFields: "${ aggregationFields } 的${ aggregationType }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationField } 的 ${ aggregationType }，类别：${ category }，分割依据：${ splitByField }", aggrTypeOfAggrFieldsByCategory: "${ aggregationFields } 的 ${ aggregationType }，类别：${ category }", aggrFieldsByXAxisField: "${ aggregationFields }，类别：${ xAxisField }", aggrTypeXAxisField: "${ aggregationType }，类别：${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ aggregationType }，类别：${ xAxisField }，分割依据：${ splitByField }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationField } 的 ${ aggregationType }，类别：${ xAxisField }，分割依据：${ splitByField }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationFields } 的 ${ aggregationType }，类别：${ xAxisField }", distributionOfField: "${ valueField } 分布", distributionOfFields: "${ valueFields } 分布", distributionOfFieldsByCategory: "按 ${ category } 分布 ${ valueFields }", distributionOfFieldsByCategoryAndSplitBy: "按 ${ category } 和 ${ splitByField } 分布 ${ valueFields }", xAndY: "${ x } 和 ${ y }" }, i = { barChart: "条形图", lineChart: "折线图", pieChart: "饼图", histogram: "直方图", scatterplot: "试_Scatterplot____________验" }, a = {
-  axisLabels: e,
-  titleLabels: g,
-  chartType: i
-};
-export {
-  e as axisLabels,
-  i as chartType,
-  a as default,
-  g as titleLabels
-};

package/dist/chunks/messages.zh-HK.js

@@ -1,48 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const t = "載入圖表時出錯。", a = "無法將對數轉換套用於負值或零值。", e = "無法將平方根轉換套用於負值。", o = "載入圖層時出錯。 URL = ${ url }。 入口網站項目 ID = ${ portalItemId }。", s = "在圖層中找不到配置中定義的欄位 [${ fieldNames }]。", n = "${ dataPath } 必須唯一。 名為 ${ seriesName } 的數列具有其他數列已在使用的 ID (${ seriesID })。", r = "${ dataPath } 無法在非數值欄位上執行非計數匯聚。", i = "${ dataPath } 缺少名為 ${ missingProperty } 的屬性。", _ = "${ dataPath } 不應短於 ${ limit } 個字元。", d = "${ dataPath } 的項目數不應少於 ${ limit } 個。", c = "${ dataPath } 的項目數不應多於 ${ limit } 個。", l = "${ dataPath } 至少必須有一個非空白字元。", $ = "${ dataPath } 不能有 ${ additionalProperty }。", u = "${ dataPath } 必須等於下列其中一個允許值: ${ allowedValues }。", m = "${ dataPath } 必須符合下列其中一項結構描述: ${ schemaOptions }。", p = "不支援包含比例符號的散點圖。 已套用預設符號大小。", h = "無法讀取輸入資料。", P = "試_The queryBins operation is not supported on this service______________________________驗.", y = "索引 ${ seriesIndex } 上預期的數列類型為 '${ expectedType }'，但改為接收 '${ receivedType }'", I = "或", g = {
-  defaultError: t,
-  negativeValueInDataForLogTransformation: a,
-  negativeValueInDataForSqrtTransformation: e,
-  layerLoadFailure: o,
-  layerFieldsNotFound: s,
-  duplicateSeriesID: n,
-  nonNumericAggregation: r,
-  requiredProperty: i,
-  minLength: _,
-  minItems: d,
-  maxItems: c,
-  whiteSpacePattern: l,
-  additionalProperty: $,
-  enumValues: u,
-  anyOfValues: m,
-  bubbleChartValidateMsg: p,
-  queryError: h,
-  queryBinsNotSupported: P,
-  invalidSeriesType: y,
-  or: I
-};
-export {
-  $ as additionalProperty,
-  m as anyOfValues,
-  p as bubbleChartValidateMsg,
-  g as default,
-  t as defaultError,
-  n as duplicateSeriesID,
-  u as enumValues,
-  y as invalidSeriesType,
-  s as layerFieldsNotFound,
-  o as layerLoadFailure,
-  c as maxItems,
-  d as minItems,
-  _ as minLength,
-  a as negativeValueInDataForLogTransformation,
-  e as negativeValueInDataForSqrtTransformation,
-  r as nonNumericAggregation,
-  I as or,
-  P as queryBinsNotSupported,
-  h as queryError,
-  i as requiredProperty,
-  l as whiteSpacePattern
-};

package/dist/chunks/messages.zh-HK2.js

@@ -1,22 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const t = { chart: "圖表", barChart: "長條圖", lineChart: "折線圖", pieChart: "圓餅圖", histogram: "直方圖", scatterplot: "試_Scatterplot____________驗", boxPlot: "盒狀圖" }, e = { mean: "平均值", median: "中位數", sum: "總和", discretePercentile: "離散百分位數", minimum: "最小值", maximum: "最大值", variance: "變異", count: "計數", aggregation: "${ statistics }/${ fieldName }", noAggregation: "無匯聚" }, a = "圖表", s = "計數序列", i = "X 軸", n = "無法取得", o = { start: "貼齊至第一個資料點", end: "對齊至最後的資料點" }, c = {
-  chartType: t,
-  statistics: e,
-  defaultTitle: a,
-  countSeries: s,
-  xAxis: i,
-  notAvailable: n,
-  timeAggregationTypes: o
-};
-export {
-  t as chartType,
-  s as countSeries,
-  c as default,
-  a as defaultTitle,
-  n as notAvailable,
-  e as statistics,
-  o as timeAggregationTypes,
-  i as xAxis
-};

package/dist/chunks/messages.zh-HK3.js

@@ -1,77 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const _ = "試_Play_________驗", e = "試_Stop_________驗", o = "試_Legend_____________驗", r = "試_Loading_______________驗", t = "試_Home_________驗", s = "試_Chart___________驗", a = "試_Series_____________驗", n = "試_Export_____________驗", i = "試_Image___________驗", l = "試_Data_________驗", d = "試_Print___________驗", c = {
-  "Zoom Out": "試_Zoom Out_________________驗",
-  Play: _,
-  Stop: e,
-  Legend: o,
-  "Press ENTER to toggle": "試_Press ENTER to toggle______________________驗",
-  Loading: r,
-  Home: t,
-  Chart: s,
-  "Serial chart": "試_Serial chart_____________驗",
-  "X/Y chart": "試_X/Y chart___________________驗",
-  "Pie chart": "試_Pie chart___________________驗",
-  "Gauge chart": "試_Gauge chart____________驗",
-  "Radar chart": "試_Radar chart____________驗",
-  "Sankey diagram": "試_Sankey diagram_______________驗",
-  "Flow diagram": "試_Flow diagram_____________驗",
-  "Chord diagram": "試_Chord diagram______________驗",
-  "TreeMap chart": "試_TreeMap chart______________驗",
-  "Sliced chart": "試_Sliced chart_____________驗",
-  Series: a,
-  "Candlestick Series": "試_Candlestick Series___________________驗",
-  "OHLC Series": "試_OHLC Series____________驗",
-  "Column Series": "試_Column Series______________驗",
-  "Line Series": "試_Line Series____________驗",
-  "Pie Slice Series": "試_Pie Slice Series_________________驗",
-  "Funnel Series": "試_Funnel Series______________驗",
-  "Pyramid Series": "試_Pyramid Series_______________驗",
-  "X/Y Series": "試_X/Y Series_____________________驗",
-  Map: "試_Map_______驗",
-  "Press ENTER to zoom in": "試_Press ENTER to zoom in_______________________驗",
-  "Press ENTER to zoom out": "試_Press ENTER to zoom out________________________驗",
-  "Use arrow keys to zoom in and out": "試_Use arrow keys to zoom in and out__________________驗",
-  "Use plus and minus keys on your keyboard to zoom in and out": "試_Use plus and minus keys on your keyboard to zoom in and out_______________________________驗",
-  Export: n,
-  Image: i,
-  Data: l,
-  Print: d,
-  "Press ENTER to open": "試_Press ENTER to open____________________驗",
-  "Press ENTER to print.": "試_Press ENTER to print______________________驗.",
-  "Press ENTER to export as %1.": "試_Press ENTER to export as %1_____________________________驗.",
-  "(Press ESC to close this message)": "試_(Press ESC to close this message)__________________驗",
-  "Image Export Complete": "試_Image Export Complete______________________驗",
-  "Export operation took longer than expected. Something might have gone wrong.": "試_Export operation took longer than expected. Something might have gone wrong_______________________________________驗.",
-  "Saved from": "試_Saved from_____________________驗",
-  "Use TAB to select grip buttons or left and right arrows to change selection": "試_Use TAB to select grip buttons or left and right arrows to change selection_______________________________________驗",
-  "Use left and right arrows to move selection": "試_Use left and right arrows to move selection_______________________驗",
-  "Use left and right arrows to move left selection": "試_Use left and right arrows to move left selection_________________________驗",
-  "Use left and right arrows to move right selection": "試_Use left and right arrows to move right selection__________________________驗",
-  "Use TAB select grip buttons or up and down arrows to change selection": "試_Use TAB select grip buttons or up and down arrows to change selection____________________________________驗",
-  "Use up and down arrows to move selection": "試_Use up and down arrows to move selection_____________________驗",
-  "Use up and down arrows to move lower selection": "試_Use up and down arrows to move lower selection________________________驗",
-  "Use up and down arrows to move upper selection": "試_Use up and down arrows to move upper selection________________________驗",
-  "From %1 to %2": "試_From %1 to %2______________驗",
-  "From %1": "試_From %1_______________驗",
-  "To %1": "試_To %1___________驗",
-  "No parser available for file: %1": "試_No parser available for file: %1_________________驗",
-  "Error parsing file: %1": "試_Error parsing file: %1_______________________驗",
-  "Unable to load file: %1": "試_Unable to load file: %1________________________驗",
-  "Invalid date": "試_Invalid date_____________驗"
-};
-export {
-  s as Chart,
-  l as Data,
-  n as Export,
-  t as Home,
-  i as Image,
-  o as Legend,
-  r as Loading,
-  _ as Play,
-  d as Print,
-  a as Series,
-  e as Stop,
-  c as default
-};

package/dist/chunks/messages.zh-HK4.js

@@ -1,14 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const e = { percent: "百分比", values: "值", standardizedValues: "標準化值", count: "計數", aggregationOfValues: "值的 ${ aggregation }", aggregationOfFieldName: "${ aggregation }/${ fieldName }" }, g = { aggrFieldsByCategory: "按 ${ category } 排列的 ${ aggregationFields }", aggrTypeCategory: "按 ${ category } 排列的 ${ aggregationType }", aggrTypeCategoryBySplitBy: "按 ${ category } 和 ${ splitByField } 排列的 ${ aggregationType }", aggrTypeOfAggrFields: "${ aggregationType }/${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "按 ${ category } 和 ${ splitByField } 排列之 ${ aggregationField } 的 ${ aggregationType }", aggrTypeOfAggrFieldsByCategory: "按 ${ aggregationType } 排列之 ${ category } 的 ${ aggregationFields }", aggrFieldsByXAxisField: "按 ${ xAxisField } 排列的 ${ aggregationFields }", aggrTypeXAxisField: "按 ${ xAxisField } 排列的 ${ aggregationType }", aggrTypeXAxisFieldBySplitBy: "按 ${ xAxisField } 和 ${ splitByField } 排列的 ${ aggregationType }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "按 ${ xAxisField } 和 ${ splitByField } 排列之 ${ aggregationField } 的 ${ aggregationType }", aggrTypeOfAggrFieldsByXAxisField: "按 ${ aggregationType } 排列之 ${ xAxisField } 的 ${ aggregationFields }", distributionOfField: "${ valueField } 的分佈", distributionOfFields: "${ valueFields } 的分佈", distributionOfFieldsByCategory: "按 ${ category } 的 ${ valueFields } 分佈", distributionOfFieldsByCategoryAndSplitBy: "按 ${ category } 和 ${ splitByField } 的 ${ valueFields } 分佈", xAndY: "${ x } 和 ${ y }" }, i = { barChart: "長條圖", lineChart: "折線圖", pieChart: "圓餅圖", histogram: "直方圖", scatterplot: "試_Scatterplot____________驗" }, a = {
-  axisLabels: e,
-  titleLabels: g,
-  chartType: i
-};
-export {
-  e as axisLabels,
-  i as chartType,
-  a as default,
-  g as titleLabels
-};

package/dist/chunks/messages.zh-TW.js

@@ -1,48 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const t = "載入圖表時出錯。", a = "無法將對數轉換套用於負值或零值。", e = "無法將平方根轉換套用於負值。", o = "載入圖層時出錯。 URL = ${ url }。 入口網站項目 ID = ${ portalItemId }。", s = "在圖層中找不到配置中定義的欄位 [${ fieldNames }]。", n = "${ dataPath } 必須唯一。 名為 ${ seriesName } 的數列具有其他數列已在使用的 ID (${ seriesID })。", r = "${ dataPath } 無法在非數值欄位上執行非計數匯聚。", i = "${ dataPath } 缺少名為 ${ missingProperty } 的屬性。", _ = "${ dataPath } 不應短於 ${ limit } 個字元。", d = "${ dataPath } 的項目數不應少於 ${ limit } 個。", c = "${ dataPath } 的項目數不應多於 ${ limit } 個。", l = "${ dataPath } 至少必須有一個非空白字元。", $ = "${ dataPath } 不能有 ${ additionalProperty }。", u = "${ dataPath } 必須等於下列其中一個允許值: ${ allowedValues }。", m = "${ dataPath } 必須符合下列其中一項結構描述: ${ schemaOptions }。", p = "不支援包含比例符號的散點圖。 已套用預設符號大小。", h = "無法讀取輸入資料。", P = "試_The queryBins operation is not supported on this service______________________________驗.", y = "索引 ${ seriesIndex } 上預期的數列類型為 '${ expectedType }'，但改為接收 '${ receivedType }'", I = "或", g = {
-  defaultError: t,
-  negativeValueInDataForLogTransformation: a,
-  negativeValueInDataForSqrtTransformation: e,
-  layerLoadFailure: o,
-  layerFieldsNotFound: s,
-  duplicateSeriesID: n,
-  nonNumericAggregation: r,
-  requiredProperty: i,
-  minLength: _,
-  minItems: d,
-  maxItems: c,
-  whiteSpacePattern: l,
-  additionalProperty: $,
-  enumValues: u,
-  anyOfValues: m,
-  bubbleChartValidateMsg: p,
-  queryError: h,
-  queryBinsNotSupported: P,
-  invalidSeriesType: y,
-  or: I
-};
-export {
-  $ as additionalProperty,
-  m as anyOfValues,
-  p as bubbleChartValidateMsg,
-  g as default,
-  t as defaultError,
-  n as duplicateSeriesID,
-  u as enumValues,
-  y as invalidSeriesType,
-  s as layerFieldsNotFound,
-  o as layerLoadFailure,
-  c as maxItems,
-  d as minItems,
-  _ as minLength,
-  a as negativeValueInDataForLogTransformation,
-  e as negativeValueInDataForSqrtTransformation,
-  r as nonNumericAggregation,
-  I as or,
-  P as queryBinsNotSupported,
-  h as queryError,
-  i as requiredProperty,
-  l as whiteSpacePattern
-};

package/dist/chunks/messages.zh-TW2.js

@@ -1,22 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const t = { chart: "圖表", barChart: "長條圖", lineChart: "折線圖", pieChart: "圓餅圖", histogram: "直方圖", scatterplot: "試_Scatterplot____________驗", boxPlot: "盒狀圖" }, e = { mean: "平均值", median: "中位數", sum: "總和", discretePercentile: "離散百分位數", minimum: "最小值", maximum: "最大值", variance: "變異", count: "計數", aggregation: "${ statistics }/${ fieldName }", noAggregation: "無匯聚" }, a = "圖表", s = "計數序列", i = "X 軸", n = "無法取得", o = { start: "貼齊至第一個資料點", end: "對齊至最後的資料點" }, c = {
-  chartType: t,
-  statistics: e,
-  defaultTitle: a,
-  countSeries: s,
-  xAxis: i,
-  notAvailable: n,
-  timeAggregationTypes: o
-};
-export {
-  t as chartType,
-  s as countSeries,
-  c as default,
-  a as defaultTitle,
-  n as notAvailable,
-  e as statistics,
-  o as timeAggregationTypes,
-  i as xAxis
-};