@arcgis/charts-components 4.34.0-next.9 → 4.34.0-next.90

package/dist/cdn/assets/errors/t9n/messages.zh-TW.json

@@ -1 +0,0 @@
-{"errorHeading":"試_Error___________驗","placeholders":{"barChartCreateMsg":"試_Bar charts group data by categories along the x-axis. Select a category field or select multiple numeric fields in the Data pane to get started_________________________________________________________________________驗.","boxPlotCreateMsg":"試_Box plots display the distribution of one or more numeric attributes. Select at least one Numeric field in the Data pane to get started_____________________________________________________________________驗.","lineChartCreateMsg":"試_Line charts show change along a continuous axis. Select a date or numeric field in the Data pane to get started_________________________________________________________驗.","pieChartCreateMsg":"試_Pie charts group data into slices to visualize part-to-whole relationships. Slices can be created from unique values in a category field, or from multiple numeric fields. Select a category field under Slices from Category or multiple numeric fields under Slices from Fields in the Data pane to get started__________________________________________________________________________________________________________________________________________________________驗.","histogramCreateMsg":"試_Histograms visualize the distribution of a numeric attribute by grouping values into bins. Select a numeric field in the Data pane to get started__________________________________________________________________________驗.","scatterplotCreateMsg":"試_Scatterplots visualize the relationship between two numeric attributes. Select two numeric fields in the Data pane to get started__________________________________________________________________驗."},"notifications":{"invalidConfig":"試_The chart configuration is invalid___________________驗.","invalidSeriesConfig":"試_No data is available to display due to empty data field(s) and/or combination of filters______________________________________________驗.","invalidSeriesConfigTitle":"試_No data_______________驗","validateAggregationTypeMsg":"試_Please choose at least one numeric field to display on the y-axis__________________________________驗.","missingNumericFields":"試_Numeric field required_______________________驗","noAggregationRequiresNumericFields":"試_Charts with no aggregation require at least one Numeric field________________________________驗."},"tooManySelectedElements":{"title":"試_Selection limit exceeded_________________________驗","message":"試_Selections are limited to 500 elements____________________驗"},"incompatibleChartVersion":{"title":"試_Incompatible chart version___________________________驗","message":"試_Chart version ${ chartVersion } is not compatible with this application. Some features may not be available_______________________________________________________驗."},"modalHeaders":{"invalidData":"試_Invalid data_____________驗","invalidChart":"試_Invalid chart______________驗","noDataAvailable":"試_No data available to display_____________________________驗","tooManyFeatures":"試_Too many features__________________驗","cannotCombineNegativeAndPositiveSlices":"試_Pie charts cannot combine slices with positive values to slices with negative values___________________________________________驗","error":"試_Error___________驗","warning":"試_Warning_______________驗","newChart":"試_New chart___________________驗"},"errors":{"divNode":"試_Creating a chart requires an HTML div node_______________________驗.","errorRequest":"試_Please fix the following errors__________________驗: ","warningRequest":"試_Please address the following warnings_____________________驗: ","newChartRequest":"試_Configure chart_________________驗.","invalidValueFormatForLineChart":"試_The axis 'valueFormat' is invalid. Only numeric type is allowed on the line chart y-axis______________________________________________驗.","invalidValueFormatForBarChart":"試_The axis 'valueFormat' is invalid. Only numeric type is allowed on the bar chart y-axis_____________________________________________驗.","invalidValueFormatForComboBarLineChart":"試_The axis 'valueFormat' is invalid. Only numeric type is allowed on the bar-line chart y-axis, and category and date types on the x-axis_____________________________________________________________________驗.","invalidValueFormatForBoxPlot":"試_The axis 'valueFormat' is invalid. Only numeric type is allowed on the box plot y-axis, and category and date types on the x-axis__________________________________________________________________驗.","invalidValueFormatForHistogram":"試_The axis 'valueFormat' is invalid. Only numeric type is allowed on the histogram axes____________________________________________驗.","invalidValueFormatForScatterplot":"試_The axis 'valueFormat' is invalid. Only numeric type is allowed on the scatter plot axes______________________________________________驗.","invalidValueFormatForGauge":"試_The axis 'valueFormat' is invalid. Only numeric type is allowed on the gauge________________________________________驗.","mismatchAxisAndValueFormat":"試_There's a mismatch between the axis type and the axis 'valueFormat'___________________________________驗.","queryError":"試_Failure to read input data____________________________驗.","simpleError":"試_Something went wrong______________________驗.","defaultInvalidChart":"試_There was an error creating the chart____________________驗.","categoryCountCannotExceedLimit":"試_There are ${ categoryCount } categories on this chart. Charts are limited to ${ maxCategoryCount } categories. Choose a Category field with fewer unique values or apply a filter to your data_________________________________________________________________________________________________驗.","uniqueSeriesBarCountCannotExceedLimit":"試_There are a total of ${ elementCount } bars in this chart. Bar charts with one series are limited to ${ totalLimit } bars. Choose a Category field with fewer unique values or apply a filter to your data_______________________________________________________________________________________________________驗.","twoSeriesBarCountCannotExceedLimit":"試_Bar charts with two series are limited to ${ totalLimit } bars, or ${ seriesLimit } bars per series. Choose a Category field with fewer unique values or apply a filter to your data____________________________________________________________________________________________驗.","threePlusSeriesBarCountCannotExceedLimit":"試_Bar charts with three or more series are limited to ${ totalLimit } bars, or ${ seriesLimit } bars per series. Choose a Category field with fewer unique values or apply a filter to your data_________________________________________________________________________________________________驗.","barSeriesCountCannotExceedLimit":"試_Bar charts are limited to ${ seriesLimit } series. Choose a split-by field with fewer unique values___________________________________________________驗","uniqueSeriesLineCountCannotExceedLimit":"試_There are a total of ${ elementCount } markers in this chart. Line charts with one series are limited to ${ totalLimit } markers. Choose a numeric field with fewer unique values or apply a filter to your data__________________________________________________________________________________________________________驗.","twoSeriesLineCountCannotExceedLimit":"試_Line charts with two series are limited to ${ totalLimit } markers, or ${ seriesLimit } markers per series. Choose a numeric field with fewer unique values or apply a filter to your data_______________________________________________________________________________________________驗.","threePlusSeriesLineCountCannotExceedLimit":"試_Line charts with three or more series are limited to ${ totalLimit } markers, or ${ seriesLimit } markers per series. Choose a numeric field with fewer unique values or apply a filter to your data____________________________________________________________________________________________________驗.","uniqueTemporalSeriesLineCountCannotExceedLimit":"試_There are a total of ${ elementCount } markers in this chart. Line charts with one series are limited to ${ totalLimit } markers. Choose a larger temporal bin size or apply a filter to your data___________________________________________________________________________________________________驗.","twoTemporalSeriesLineCountCannotExceedLimit":"試_Line charts with two series are limited to ${ totalLimit } markers, or ${ seriesLimit } markers per series. Choose a larger temporal bin size or apply a filter to your data________________________________________________________________________________________驗.","threePlusTemporalSeriesLineCountCannotExceedLimit":"試_Line charts with three or more series are limited to ${ totalLimit } markers, or ${ seriesLimit } markers per series. Choose a larger temporal bin size or apply a filter to your data_____________________________________________________________________________________________驗.","lineSeriesCountCannotExceedLimit":"試_Line charts are limited to ${ seriesLimit } series. Choose a split-by field with fewer unique values___________________________________________________驗","uniqueSeriesBoxCountCannotExceedLimit":"試_There are a total of ${ elementCount } boxes in this chart. Box plots with one series are limited to ${ totalLimit } boxes. Choose a Category field with fewer unique values or apply a filter to your data_______________________________________________________________________________________________________驗.","twoSeriesBoxCountCannotExceedLimit":"試_Box plots with two series are limited to ${ totalLimit } boxes, or ${ seriesLimit } boxes per series. Choose a Category field with fewer unique values or apply a filter to your data____________________________________________________________________________________________驗.","threePlusBoxLineCountCannotExceedLimit":"試_Box plots with three or more series are limited to ${ totalLimit } boxes, or ${ seriesLimit } boxes per series. Choose a Category field with fewer unique values or apply a filter to your data_________________________________________________________________________________________________驗.","boxSeriesCountCannotExceedLimit":"試_Box plots are limited to ${ seriesLimit } series. Choose a split-by field with fewer unique values__________________________________________________驗","boxSeriesOutlierCannotExceedLimit":"試_Box plots can only display up to ${ totalLimit } outlier points. Filter you data__________________________________________驗.","pieChartCannotHaveMixtureOfPositiveAndNegativeSlices":"試_Ensure the sum total of the chosen numeric field(s) returns all positive values or all negative values_____________________________________________________驗.","pieChartSlicesCannotExceedLimit":"試_There are a total of ${ sliceCount } slices in this chart. Pie charts are limited to ${ totalLimit } slices. Choose a Category field with fewer unique values, add fewer Numeric fields, or apply a filter to your data_____________________________________________________________________________________________________________驗.","gaugeCannotExceedLimit":"試_Feature-based gauges are limited to ${ totalLimit } features. Filter your data_________________________________________驗.","negativeValueInDataForLogTransformation":"試_Cannot apply a log transformation to negative or zero values________________________________驗.","negativeValueInDataForSqrtTransformation":"試_Cannot apply a square root transformation to negative values________________________________驗.","logarithmicXAxisNotPossible":"試_Logarithmic value x-axis cannot have negative or zero values________________________________驗.","logarithmicYAxisNotPossible":"試_Logarithmic value y-axis cannot have negative or zero values________________________________驗.","histogramEmptyField":"試_Histograms require at least two numeric values_________________________驗.","noDataMessage":"試_No data is available to display due to empty data field(s) and/or combination of filters______________________________________________驗.","noDataFBSMessage":"試_Filter by selection is enabled. There are no selected features to display______________________________________驗.","noDataFBEMessage":"試_Filter by extent is enabled. There are no features in the map extent to display_________________________________________驗.","exportImageChartNotReady":"試_Chart is not ready for export______________________________驗","exportImage":"試_Failed to export chart_______________________驗"}}

package/dist/chunks/messages.ar.js

@@ -1,48 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const t = "حدث خطأ أثناء تحميل المخطط.", a = "يتعذر تطبيق تحويل السِّجل إلى قيم سلبية أو إلى صفر.", e = "يتعذر تطبيق تحويل الجذر التربيعي إلى قيم سلبية.", o = "حدث خطأ أثناء تحميل الطبقة. URL = ${ url }. معرف عنصر البوابة = ${ portalItemId }.", s = "لم يُعثر في الطبقة على الحقول [${ fieldNames }] المحددة في التكوين.", n = "يجب أن يكون ${ dataPath } مميزًا. السلسلة التي اسمها ${ seriesName } تتضمن معرفًا (${ seriesID }) مستخدمًا بالفعل من قبل سلسلة أخرى.", r = "يتعذر على ${ dataPath } إجراء تجميع من دون حساب في حقل غير رقمي.", i = "يتفقد ${ dataPath } خاصية باسم ${ missingProperty }.", _ = "يجب ألا يكون ${ dataPath } أقصر من ${ limit } من الحروف.", d = "يجب ألا يحتوي ${ dataPath } على أقل من ${ limit } من العناصر.", c = "يجب ألا يحتوي ${ dataPath } على أكثر من ${ limit } من العناصر.", l = "يجب أن يتضمن ${ dataPath } حرفًا واحدًا على الأقل ليس مسافة بيضاء.", $ = "يجب أن يحتوي ${ dataPath } على ${ additionalProperty }.", u = "يجب أن يكون ${ dataPath } مساويًا لإحدى القيم هذه المسموح بها: ${ allowedValues }", p = "يجب أن يتطابق ${ dataPath } مع مخطط أحد ما يلي: ${ schemaOptions }.", m = "Scatterplots ذات الرموز المتناسبة غير مدعومة. تم تطبيق حجم الرمز الافتراضي.", h = "فشلت قراءة البيانات المدخلة.", P = "بيت_The queryBins operation is not supported on this service______________________________لاحقة.", y = "نوع السلسلة المتوقع في الفهرس ${ seriesIndex } هو '${ expectedType }' ولكن تم استلام '${ receivedType }' بدلاً من ذلك", g = "أو", I = {
-  defaultError: t,
-  negativeValueInDataForLogTransformation: a,
-  negativeValueInDataForSqrtTransformation: e,
-  layerLoadFailure: o,
-  layerFieldsNotFound: s,
-  duplicateSeriesID: n,
-  nonNumericAggregation: r,
-  requiredProperty: i,
-  minLength: _,
-  minItems: d,
-  maxItems: c,
-  whiteSpacePattern: l,
-  additionalProperty: $,
-  enumValues: u,
-  anyOfValues: p,
-  bubbleChartValidateMsg: m,
-  queryError: h,
-  queryBinsNotSupported: P,
-  invalidSeriesType: y,
-  or: g
-};
-export {
-  $ as additionalProperty,
-  p as anyOfValues,
-  m as bubbleChartValidateMsg,
-  I as default,
-  t as defaultError,
-  n as duplicateSeriesID,
-  u as enumValues,
-  y as invalidSeriesType,
-  s as layerFieldsNotFound,
-  o as layerLoadFailure,
-  c as maxItems,
-  d as minItems,
-  _ as minLength,
-  a as negativeValueInDataForLogTransformation,
-  e as negativeValueInDataForSqrtTransformation,
-  r as nonNumericAggregation,
-  g as or,
-  P as queryBinsNotSupported,
-  h as queryError,
-  i as requiredProperty,
-  l as whiteSpacePattern
-};

package/dist/chunks/messages.ar2.js

@@ -1,22 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const t = { chart: "الرسم البياني", barChart: "المخطط الشريطي", lineChart: "مخطط خطي", pieChart: "مخطط دائري", histogram: "مدرج تكراري", scatterplot: "بيت_Scatterplot____________لاحقة", boxPlot: "رسم مربع" }, e = { mean: "المتوسط", median: "متوسط", sum: "مجموع", discretePercentile: "النسبة المئوية المنفصلة", minimum: "الحد الأدنى", maximum: "الحد الأقصى", variance: "تنوع", count: "عدد", aggregation: "${ statistics } من ${ fieldName }", noAggregation: "لا يوجد تجميع" }, a = "الرسم البياني", s = "سلسلة العدد", i = "محور س", n = "غير مرئي", o = { start: "انطباق على نقطة البيانات الأولى", end: "انطباق على نقطة البيانات الأخيرة" }, c = {
-  chartType: t,
-  statistics: e,
-  defaultTitle: a,
-  countSeries: s,
-  xAxis: i,
-  notAvailable: n,
-  timeAggregationTypes: o
-};
-export {
-  t as chartType,
-  s as countSeries,
-  c as default,
-  a as defaultTitle,
-  n as notAvailable,
-  e as statistics,
-  o as timeAggregationTypes,
-  i as xAxis
-};

package/dist/chunks/messages.ar3.js

@@ -1,77 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const _ = "بيت_Play_________لاحقة", e = "بيت_Stop_________لاحقة", o = "بيت_Legend_____________لاحقة", r = "بيت_Loading_______________لاحقة", t = "بيت_Home_________لاحقة", s = "بيت_Chart___________لاحقة", a = "بيت_Series_____________لاحقة", n = "بيت_Export_____________لاحقة", i = "بيت_Image___________لاحقة", l = "بيت_Data_________لاحقة", d = "بيت_Print___________لاحقة", c = {
-  "Zoom Out": "بيت_Zoom Out_________________لاحقة",
-  Play: _,
-  Stop: e,
-  Legend: o,
-  "Press ENTER to toggle": "بيت_Press ENTER to toggle______________________لاحقة",
-  Loading: r,
-  Home: t,
-  Chart: s,
-  "Serial chart": "بيت_Serial chart_____________لاحقة",
-  "X/Y chart": "بيت_X/Y chart___________________لاحقة",
-  "Pie chart": "بيت_Pie chart___________________لاحقة",
-  "Gauge chart": "بيت_Gauge chart____________لاحقة",
-  "Radar chart": "بيت_Radar chart____________لاحقة",
-  "Sankey diagram": "بيت_Sankey diagram_______________لاحقة",
-  "Flow diagram": "بيت_Flow diagram_____________لاحقة",
-  "Chord diagram": "بيت_Chord diagram______________لاحقة",
-  "TreeMap chart": "بيت_TreeMap chart______________لاحقة",
-  "Sliced chart": "بيت_Sliced chart_____________لاحقة",
-  Series: a,
-  "Candlestick Series": "بيت_Candlestick Series___________________لاحقة",
-  "OHLC Series": "بيت_OHLC Series____________لاحقة",
-  "Column Series": "بيت_Column Series______________لاحقة",
-  "Line Series": "بيت_Line Series____________لاحقة",
-  "Pie Slice Series": "بيت_Pie Slice Series_________________لاحقة",
-  "Funnel Series": "بيت_Funnel Series______________لاحقة",
-  "Pyramid Series": "بيت_Pyramid Series_______________لاحقة",
-  "X/Y Series": "بيت_X/Y Series_____________________لاحقة",
-  Map: "بيت_Map_______لاحقة",
-  "Press ENTER to zoom in": "بيت_Press ENTER to zoom in_______________________لاحقة",
-  "Press ENTER to zoom out": "بيت_Press ENTER to zoom out________________________لاحقة",
-  "Use arrow keys to zoom in and out": "بيت_Use arrow keys to zoom in and out__________________لاحقة",
-  "Use plus and minus keys on your keyboard to zoom in and out": "بيت_Use plus and minus keys on your keyboard to zoom in and out_______________________________لاحقة",
-  Export: n,
-  Image: i,
-  Data: l,
-  Print: d,
-  "Press ENTER to open": "بيت_Press ENTER to open____________________لاحقة",
-  "Press ENTER to print.": "بيت_Press ENTER to print______________________لاحقة.",
-  "Press ENTER to export as %1.": "بيت_Press ENTER to export as %1_____________________________لاحقة.",
-  "(Press ESC to close this message)": "بيت_(Press ESC to close this message)__________________لاحقة",
-  "Image Export Complete": "بيت_Image Export Complete______________________لاحقة",
-  "Export operation took longer than expected. Something might have gone wrong.": "بيت_Export operation took longer than expected. Something might have gone wrong_______________________________________لاحقة.",
-  "Saved from": "بيت_Saved from_____________________لاحقة",
-  "Use TAB to select grip buttons or left and right arrows to change selection": "بيت_Use TAB to select grip buttons or left and right arrows to change selection_______________________________________لاحقة",
-  "Use left and right arrows to move selection": "بيت_Use left and right arrows to move selection_______________________لاحقة",
-  "Use left and right arrows to move left selection": "بيت_Use left and right arrows to move left selection_________________________لاحقة",
-  "Use left and right arrows to move right selection": "بيت_Use left and right arrows to move right selection__________________________لاحقة",
-  "Use TAB select grip buttons or up and down arrows to change selection": "بيت_Use TAB select grip buttons or up and down arrows to change selection____________________________________لاحقة",
-  "Use up and down arrows to move selection": "بيت_Use up and down arrows to move selection_____________________لاحقة",
-  "Use up and down arrows to move lower selection": "بيت_Use up and down arrows to move lower selection________________________لاحقة",
-  "Use up and down arrows to move upper selection": "بيت_Use up and down arrows to move upper selection________________________لاحقة",
-  "From %1 to %2": "بيت_From %1 to %2______________لاحقة",
-  "From %1": "بيت_From %1_______________لاحقة",
-  "To %1": "بيت_To %1___________لاحقة",
-  "No parser available for file: %1": "بيت_No parser available for file: %1_________________لاحقة",
-  "Error parsing file: %1": "بيت_Error parsing file: %1_______________________لاحقة",
-  "Unable to load file: %1": "بيت_Unable to load file: %1________________________لاحقة",
-  "Invalid date": "بيت_Invalid date_____________لاحقة"
-};
-export {
-  s as Chart,
-  l as Data,
-  n as Export,
-  t as Home,
-  i as Image,
-  o as Legend,
-  r as Loading,
-  _ as Play,
-  d as Print,
-  a as Series,
-  e as Stop,
-  c as default
-};

package/dist/chunks/messages.ar4.js

@@ -1,14 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const e = { percent: "نسبة مئوية", values: "قيم", standardizedValues: "القيم المعيارية", count: "عدد", aggregationOfValues: "${ aggregation } من القيم", aggregationOfFieldName: "${ aggregation } من ${ fieldName }" }, g = { aggrFieldsByCategory: "${ aggregationFields } بـ ${ category }", aggrTypeCategory: "${ aggregationType } بـ ${ category }", aggrTypeCategoryBySplitBy: "${ aggregationType } من ${ category } من ${ splitByField }", aggrTypeOfAggrFields: "${ aggregationType } من ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationType } لـ ${ aggregationField } من ${ category } من ${ splitByField }", aggrTypeOfAggrFieldsByCategory: "${ aggregationType } لـ ${ aggregationFields } من ${ category }", aggrFieldsByXAxisField: "${ aggregationFields } بـ ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType } بـ ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ aggregationType } من ${ xAxisField } من ${ splitByField }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationType } لـ ${ aggregationField } من ${ xAxisField } من ${ splitByField }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationType } لـ ${ aggregationFields } من ${ xAxisField }", distributionOfField: "توزيع ${ valueField }", distributionOfFields: "توزيع ${ valueFields }", distributionOfFieldsByCategory: "توزيع ${ valueFields } بواسطة ${ category }", distributionOfFieldsByCategoryAndSplitBy: "توزيع ${ valueFields } بواسطة ${ category } و ${ splitByField }", xAndY: "${ x } و${ y }" }, i = { barChart: "المخطط الشريطي", lineChart: "مخطط خطي", pieChart: "مخطط دائري", histogram: "مدرج تكراري", scatterplot: "بيت_Scatterplot____________لاحقة" }, a = {
-  axisLabels: e,
-  titleLabels: g,
-  chartType: i
-};
-export {
-  e as axisLabels,
-  i as chartType,
-  a as default,
-  g as titleLabels
-};

package/dist/chunks/messages.bg.js

@@ -1,48 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const t = "Възникна грешка при зареждането на диаграмата.", a = "Не може да се приложи логаритмична трансформация към отрицателни или нулеви стойности.", e = "Не може да се приложи трансформация с квадратен корен към отрицателни стойности.", o = "Възникна грешка при зареждането на слоя. URL = ${ url }. ИД на елемент на портал = ${ portalItemId }.", s = "Полетата [${ fieldNames }], които са дефинирани в конфигурацията, не са намерени в слоя.", n = "${ dataPath } трябва да бъде унукално. Серията с името ${ seriesName } има ИД (${ seriesID }), който вече се използва от друга серия.", r = "${ dataPath } не може да се извършва обобщение, различно от обобщение на брой, за нецифрово поле.", i = "${ dataPath } няма име на свойство ${ missingProperty }.", _ = "${ dataPath } не трябва да има по-малко от ${ limit } символи.", d = "${ dataPath } не трябва да има по-малко от ${ limit } елементи.", c = "${ dataPath } не трябва да има повече от ${ limit } елементи.", l = "${ dataPath } трябва да има поне един символ, който не е интервал.", $ = "${ dataPath } не трябва да бъде ${ additionalProperty }.", u = "${ dataPath } трябва да бъде равна на една от тези позволени стойности: ${ allowedValues }.", m = "${ dataPath }трябва да съответства на схемата на една от тези: ${ schemaOptions }.", p = "Не се поддържат диаграми на разсейване с пропорционални символи. Използван е размер на символа по подразбиране.", h = "Входните данни не могат да се прочетат.", P = "й_The queryBins operation is not supported on this service______________________________й.", y = "Очакваният тип серия в индекс${ seriesIndex } е „${ expectedType }“, но „${ receivedType }“ е получен вместо това", g = "или", I = {
-  defaultError: t,
-  negativeValueInDataForLogTransformation: a,
-  negativeValueInDataForSqrtTransformation: e,
-  layerLoadFailure: o,
-  layerFieldsNotFound: s,
-  duplicateSeriesID: n,
-  nonNumericAggregation: r,
-  requiredProperty: i,
-  minLength: _,
-  minItems: d,
-  maxItems: c,
-  whiteSpacePattern: l,
-  additionalProperty: $,
-  enumValues: u,
-  anyOfValues: m,
-  bubbleChartValidateMsg: p,
-  queryError: h,
-  queryBinsNotSupported: P,
-  invalidSeriesType: y,
-  or: g
-};
-export {
-  $ as additionalProperty,
-  m as anyOfValues,
-  p as bubbleChartValidateMsg,
-  I as default,
-  t as defaultError,
-  n as duplicateSeriesID,
-  u as enumValues,
-  y as invalidSeriesType,
-  s as layerFieldsNotFound,
-  o as layerLoadFailure,
-  c as maxItems,
-  d as minItems,
-  _ as minLength,
-  a as negativeValueInDataForLogTransformation,
-  e as negativeValueInDataForSqrtTransformation,
-  r as nonNumericAggregation,
-  g as or,
-  P as queryBinsNotSupported,
-  h as queryError,
-  i as requiredProperty,
-  l as whiteSpacePattern
-};

package/dist/chunks/messages.bg2.js

@@ -1,22 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const t = { chart: "Диаграма", barChart: "Диаграма във форма на лента", lineChart: "Диаграма във форма на линия", pieChart: "Диаграма в кръгла форма", histogram: "Хистограма", scatterplot: "й_Scatterplot____________й", boxPlot: "Каре диаграма" }, e = { mean: "Осреднена стойност", median: "Медиана", sum: "Сума", discretePercentile: "Дискретен перцентил", minimum: "Минимални", maximum: "Максимални", variance: "Отклонение", count: "Брой", aggregation: "${ statistics } от ${ fieldName }", noAggregation: "Няма агрегиране" }, a = "Диаграма", s = "Серия за броене", i = "Ос Х", n = "Няма налични", o = { start: "Притеглете до първата точка от данни", end: "Притеглете до последната точка от данни" }, c = {
-  chartType: t,
-  statistics: e,
-  defaultTitle: a,
-  countSeries: s,
-  xAxis: i,
-  notAvailable: n,
-  timeAggregationTypes: o
-};
-export {
-  t as chartType,
-  s as countSeries,
-  c as default,
-  a as defaultTitle,
-  n as notAvailable,
-  e as statistics,
-  o as timeAggregationTypes,
-  i as xAxis
-};

package/dist/chunks/messages.bg3.js

@@ -1,77 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const _ = "й_Play_________й", e = "й_Stop_________й", o = "й_Legend_____________й", r = "й_Loading_______________й", t = "й_Home_________й", s = "й_Chart___________й", a = "й_Series_____________й", n = "й_Export_____________й", i = "й_Image___________й", l = "й_Data_________й", d = "й_Print___________й", c = {
-  "Zoom Out": "й_Zoom Out_________________й",
-  Play: _,
-  Stop: e,
-  Legend: o,
-  "Press ENTER to toggle": "й_Press ENTER to toggle______________________й",
-  Loading: r,
-  Home: t,
-  Chart: s,
-  "Serial chart": "й_Serial chart_____________й",
-  "X/Y chart": "й_X/Y chart___________________й",
-  "Pie chart": "й_Pie chart___________________й",
-  "Gauge chart": "й_Gauge chart____________й",
-  "Radar chart": "й_Radar chart____________й",
-  "Sankey diagram": "й_Sankey diagram_______________й",
-  "Flow diagram": "й_Flow diagram_____________й",
-  "Chord diagram": "й_Chord diagram______________й",
-  "TreeMap chart": "й_TreeMap chart______________й",
-  "Sliced chart": "й_Sliced chart_____________й",
-  Series: a,
-  "Candlestick Series": "й_Candlestick Series___________________й",
-  "OHLC Series": "й_OHLC Series____________й",
-  "Column Series": "й_Column Series______________й",
-  "Line Series": "й_Line Series____________й",
-  "Pie Slice Series": "й_Pie Slice Series_________________й",
-  "Funnel Series": "й_Funnel Series______________й",
-  "Pyramid Series": "й_Pyramid Series_______________й",
-  "X/Y Series": "й_X/Y Series_____________________й",
-  Map: "й_Map_______й",
-  "Press ENTER to zoom in": "й_Press ENTER to zoom in_______________________й",
-  "Press ENTER to zoom out": "й_Press ENTER to zoom out________________________й",
-  "Use arrow keys to zoom in and out": "й_Use arrow keys to zoom in and out__________________й",
-  "Use plus and minus keys on your keyboard to zoom in and out": "й_Use plus and minus keys on your keyboard to zoom in and out_______________________________й",
-  Export: n,
-  Image: i,
-  Data: l,
-  Print: d,
-  "Press ENTER to open": "й_Press ENTER to open____________________й",
-  "Press ENTER to print.": "й_Press ENTER to print______________________й.",
-  "Press ENTER to export as %1.": "й_Press ENTER to export as %1_____________________________й.",
-  "(Press ESC to close this message)": "й_(Press ESC to close this message)__________________й",
-  "Image Export Complete": "й_Image Export Complete______________________й",
-  "Export operation took longer than expected. Something might have gone wrong.": "й_Export operation took longer than expected. Something might have gone wrong_______________________________________й.",
-  "Saved from": "й_Saved from_____________________й",
-  "Use TAB to select grip buttons or left and right arrows to change selection": "й_Use TAB to select grip buttons or left and right arrows to change selection_______________________________________й",
-  "Use left and right arrows to move selection": "й_Use left and right arrows to move selection_______________________й",
-  "Use left and right arrows to move left selection": "й_Use left and right arrows to move left selection_________________________й",
-  "Use left and right arrows to move right selection": "й_Use left and right arrows to move right selection__________________________й",
-  "Use TAB select grip buttons or up and down arrows to change selection": "й_Use TAB select grip buttons or up and down arrows to change selection____________________________________й",
-  "Use up and down arrows to move selection": "й_Use up and down arrows to move selection_____________________й",
-  "Use up and down arrows to move lower selection": "й_Use up and down arrows to move lower selection________________________й",
-  "Use up and down arrows to move upper selection": "й_Use up and down arrows to move upper selection________________________й",
-  "From %1 to %2": "й_From %1 to %2______________й",
-  "From %1": "й_From %1_______________й",
-  "To %1": "й_To %1___________й",
-  "No parser available for file: %1": "й_No parser available for file: %1_________________й",
-  "Error parsing file: %1": "й_Error parsing file: %1_______________________й",
-  "Unable to load file: %1": "й_Unable to load file: %1________________________й",
-  "Invalid date": "й_Invalid date_____________й"
-};
-export {
-  s as Chart,
-  l as Data,
-  n as Export,
-  t as Home,
-  i as Image,
-  o as Legend,
-  r as Loading,
-  _ as Play,
-  d as Print,
-  a as Series,
-  e as Stop,
-  c as default
-};

package/dist/chunks/messages.bg4.js

@@ -1,14 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const e = { percent: "Процент", values: "Стойности", standardizedValues: "Стандартизирани стойности", count: "Брой", aggregationOfValues: "${ aggregation } от стойности", aggregationOfFieldName: "${ aggregation } от ${ fieldName }" }, g = { aggrFieldsByCategory: "${ aggregationFields } от ${ category }", aggrTypeCategory: "${ aggregationType } от ${ category }", aggrTypeCategoryBySplitBy: "${ aggregationType } по ${ category } по ${ splitByField }", aggrTypeOfAggrFields: "${ aggregationType } от ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationType } от ${ aggregationField } по ${ category } по ${ splitByField }", aggrTypeOfAggrFieldsByCategory: "${ aggregationType } от ${ aggregationFields } по ${ category }", aggrFieldsByXAxisField: "${ aggregationFields } от ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType } от ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ aggregationType } по ${ xAxisField } по ${ splitByField }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationType } от ${ aggregationField } по ${ xAxisField } по ${ splitByField }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationType } от ${ aggregationFields } по ${ xAxisField }", distributionOfField: "Разпределение по ${ valueField }", distributionOfFields: "Разпределение по ${ valueFields }", distributionOfFieldsByCategory: "Разпределение на ${ valueFields } по ${ category }", distributionOfFieldsByCategoryAndSplitBy: "Разпределение на ${ valueFields } по ${ category } и ${ splitByField }", xAndY: "${ x } и ${ y }" }, i = { barChart: "Диаграма във форма на лента", lineChart: "Диаграма във форма на линия", pieChart: "Диаграма в кръгла форма", histogram: "Хистограма", scatterplot: "й_Scatterplot____________й" }, a = {
-  axisLabels: e,
-  titleLabels: g,
-  chartType: i
-};
-export {
-  e as axisLabels,
-  i as chartType,
-  a as default,
-  g as titleLabels
-};

package/dist/chunks/messages.bs.js

@@ -1,48 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const a = "Došlo je do pogreške tijekom učitavanja grafikona.", e = "Ne može se primijeniti transformacija dnevnika na negativne ili nulte vrijednosti.", i = "Ne može se primijeniti transformacija kvadratnog korijena na negativne vrijednosti.", o = "Došlo je do pogreške tijekom učitavanja sloja. URL = ${ url }. Id stavke portala = ${ portalItemId }.", t = "Polja [${ fieldNames }] koja su definirana u konfiguraciji nisu pronađena u sloju.", n = "${ dataPath } mora biti jedinstveno. Serija naziva ${ seriesName } ima ID (${ seriesID }) koji već koristi druga serija.", r = "${ dataPath } ne može izvoditi nebrojeno agregiranje na ne-numeričkom polju.", s = "${ dataPath } nedostaje svojstvo naziva ${ missingProperty }.", d = "${ dataPath } mora biti kraće od ${ limit } znakova.", m = "${ dataPath } ne smije imati manje od ${ limit } stavki.", j = "${ dataPath } ne smije imati više od ${ limit } stavki.", l = "${ dataPath } mora imati barem jedan znak koji nije razmak.", u = "${ dataPath } ne smije imati ${ additionalProperty }.", p = "${ dataPath } mora biti jednak jednoj od ovih dopuštenih vrijednosti: ${ allowedValues }.", c = "${ dataPath } mora odgovarati shemi jednog od ovih: ${ schemaOptions }.", v = "Raspršeni grafikoni s proporcionalnim simbolima nisu podržani. Primijenjena je zadana veličina simbola.", _ = "Nije uspjelo čitanje ulaznih podataka.", k = "Č_The queryBins operation is not supported on this service______________________________ž.", $ = "Očekivana vrsta serije po indeksu je ${ seriesIndex } je '${ expectedType }' ali primljeno je '${ receivedType }' umjesto toga", g = "ili", h = {
-  defaultError: a,
-  negativeValueInDataForLogTransformation: e,
-  negativeValueInDataForSqrtTransformation: i,
-  layerLoadFailure: o,
-  layerFieldsNotFound: t,
-  duplicateSeriesID: n,
-  nonNumericAggregation: r,
-  requiredProperty: s,
-  minLength: d,
-  minItems: m,
-  maxItems: j,
-  whiteSpacePattern: l,
-  additionalProperty: u,
-  enumValues: p,
-  anyOfValues: c,
-  bubbleChartValidateMsg: v,
-  queryError: _,
-  queryBinsNotSupported: k,
-  invalidSeriesType: $,
-  or: g
-};
-export {
-  u as additionalProperty,
-  c as anyOfValues,
-  v as bubbleChartValidateMsg,
-  h as default,
-  a as defaultError,
-  n as duplicateSeriesID,
-  p as enumValues,
-  $ as invalidSeriesType,
-  t as layerFieldsNotFound,
-  o as layerLoadFailure,
-  j as maxItems,
-  m as minItems,
-  d as minLength,
-  e as negativeValueInDataForLogTransformation,
-  i as negativeValueInDataForSqrtTransformation,
-  r as nonNumericAggregation,
-  g as or,
-  k as queryBinsNotSupported,
-  _ as queryError,
-  s as requiredProperty,
-  l as whiteSpacePattern
-};

package/dist/chunks/messages.bs2.js

@@ -1,22 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const t = { chart: "Grafikon", barChart: "Trakasti grafikon", lineChart: "Linijski grafikon", pieChart: "Tortni grafikon", histogram: "Histogram", scatterplot: "Č_Scatterplot____________ž", boxPlot: "Dijagram pravokutnika" }, a = { mean: "Prosjek", median: "Srednja vrijednost", sum: "Zbroj", discretePercentile: "Diskretni postotak", minimum: "Minimum", maximum: "Maksimum", variance: "Varijanca", count: "Zbroj", aggregation: "${ statistics } od ${ fieldName }", noAggregation: "Nema agregacije" }, i = "Grafikon", o = "Broj serija", e = "Os x", n = "Nije dostupno", r = { start: "Prilijepi na prvu podatkovnu točku", end: "Prilijepi na posljednju podatkovnu točku" }, s = {
-  chartType: t,
-  statistics: a,
-  defaultTitle: i,
-  countSeries: o,
-  xAxis: e,
-  notAvailable: n,
-  timeAggregationTypes: r
-};
-export {
-  t as chartType,
-  o as countSeries,
-  s as default,
-  i as defaultTitle,
-  n as notAvailable,
-  a as statistics,
-  r as timeAggregationTypes,
-  e as xAxis
-};

package/dist/chunks/messages.bs3.js

@@ -1,77 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const _ = "Č_Play_________ž", e = "Č_Stop_________ž", o = "Č_Legend_____________ž", r = "Č_Loading_______________ž", t = "Č_Home_________ž", s = "Č_Chart___________ž", a = "Č_Series_____________ž", n = "Č_Export_____________ž", i = "Č_Image___________ž", l = "Č_Data_________ž", d = "Č_Print___________ž", c = {
-  "Zoom Out": "Č_Zoom Out_________________ž",
-  Play: _,
-  Stop: e,
-  Legend: o,
-  "Press ENTER to toggle": "Č_Press ENTER to toggle______________________ž",
-  Loading: r,
-  Home: t,
-  Chart: s,
-  "Serial chart": "Č_Serial chart_____________ž",
-  "X/Y chart": "Č_X/Y chart___________________ž",
-  "Pie chart": "Č_Pie chart___________________ž",
-  "Gauge chart": "Č_Gauge chart____________ž",
-  "Radar chart": "Č_Radar chart____________ž",
-  "Sankey diagram": "Č_Sankey diagram_______________ž",
-  "Flow diagram": "Č_Flow diagram_____________ž",
-  "Chord diagram": "Č_Chord diagram______________ž",
-  "TreeMap chart": "Č_TreeMap chart______________ž",
-  "Sliced chart": "Č_Sliced chart_____________ž",
-  Series: a,
-  "Candlestick Series": "Č_Candlestick Series___________________ž",
-  "OHLC Series": "Č_OHLC Series____________ž",
-  "Column Series": "Č_Column Series______________ž",
-  "Line Series": "Č_Line Series____________ž",
-  "Pie Slice Series": "Č_Pie Slice Series_________________ž",
-  "Funnel Series": "Č_Funnel Series______________ž",
-  "Pyramid Series": "Č_Pyramid Series_______________ž",
-  "X/Y Series": "Č_X/Y Series_____________________ž",
-  Map: "Č_Map_______ž",
-  "Press ENTER to zoom in": "Č_Press ENTER to zoom in_______________________ž",
-  "Press ENTER to zoom out": "Č_Press ENTER to zoom out________________________ž",
-  "Use arrow keys to zoom in and out": "Č_Use arrow keys to zoom in and out__________________ž",
-  "Use plus and minus keys on your keyboard to zoom in and out": "Č_Use plus and minus keys on your keyboard to zoom in and out_______________________________ž",
-  Export: n,
-  Image: i,
-  Data: l,
-  Print: d,
-  "Press ENTER to open": "Č_Press ENTER to open____________________ž",
-  "Press ENTER to print.": "Č_Press ENTER to print______________________ž.",
-  "Press ENTER to export as %1.": "Č_Press ENTER to export as %1_____________________________ž.",
-  "(Press ESC to close this message)": "Č_(Press ESC to close this message)__________________ž",
-  "Image Export Complete": "Č_Image Export Complete______________________ž",
-  "Export operation took longer than expected. Something might have gone wrong.": "Č_Export operation took longer than expected. Something might have gone wrong_______________________________________ž.",
-  "Saved from": "Č_Saved from_____________________ž",
-  "Use TAB to select grip buttons or left and right arrows to change selection": "Č_Use TAB to select grip buttons or left and right arrows to change selection_______________________________________ž",
-  "Use left and right arrows to move selection": "Č_Use left and right arrows to move selection_______________________ž",
-  "Use left and right arrows to move left selection": "Č_Use left and right arrows to move left selection_________________________ž",
-  "Use left and right arrows to move right selection": "Č_Use left and right arrows to move right selection__________________________ž",
-  "Use TAB select grip buttons or up and down arrows to change selection": "Č_Use TAB select grip buttons or up and down arrows to change selection____________________________________ž",
-  "Use up and down arrows to move selection": "Č_Use up and down arrows to move selection_____________________ž",
-  "Use up and down arrows to move lower selection": "Č_Use up and down arrows to move lower selection________________________ž",
-  "Use up and down arrows to move upper selection": "Č_Use up and down arrows to move upper selection________________________ž",
-  "From %1 to %2": "Č_From %1 to %2______________ž",
-  "From %1": "Č_From %1_______________ž",
-  "To %1": "Č_To %1___________ž",
-  "No parser available for file: %1": "Č_No parser available for file: %1_________________ž",
-  "Error parsing file: %1": "Č_Error parsing file: %1_______________________ž",
-  "Unable to load file: %1": "Č_Unable to load file: %1________________________ž",
-  "Invalid date": "Č_Invalid date_____________ž"
-};
-export {
-  s as Chart,
-  l as Data,
-  n as Export,
-  t as Home,
-  i as Image,
-  o as Legend,
-  r as Loading,
-  _ as Play,
-  d as Print,
-  a as Series,
-  e as Stop,
-  c as default
-};

package/dist/chunks/messages.bs4.js

@@ -1,14 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const i = { percent: "Postotak", values: "Vrijednosti", standardizedValues: "Standardizirane vrijednosti", count: "Zbroj", aggregationOfValues: "${ aggregation } vrijednosti", aggregationOfFieldName: "${ aggregation } od ${ fieldName }" }, e = { aggrFieldsByCategory: "${ aggregationFields } od ${ category }", aggrTypeCategory: "${ aggregationType } od ${ category }", aggrTypeCategoryBySplitBy: "${ aggregationType } sa ${ category } sa ${ splitByField }", aggrTypeOfAggrFields: "${ aggregationType } od ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationType } od ${ aggregationField } sa ${ category } sa ${ splitByField }", aggrTypeOfAggrFieldsByCategory: "${ aggregationType } od ${ aggregationFields } sa ${ category }", aggrFieldsByXAxisField: "${ aggregationFields } od ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType } od ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ aggregationType } sa ${ xAxisField } sa ${ splitByField }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationType } od ${ aggregationField } sa ${ xAxisField } sa ${ splitByField }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationType } od ${ aggregationFields } sa ${ xAxisField }", distributionOfField: "Distribucija ${ valueField }", distributionOfFields: "Distribucija ${ valueFields }", distributionOfFieldsByCategory: "Distribucija ${ valueFields } po ${ category }", distributionOfFieldsByCategoryAndSplitBy: "Distribucija ${ valueFields } po ${ category } i ${ splitByField }", xAndY: "${ x } i ${ y }" }, a = { barChart: "Trakasti grafikon", lineChart: "Linijski grafikon", pieChart: "Tortni grafikon", histogram: "Histogram", scatterplot: "Č_Scatterplot____________ž" }, g = {
-  axisLabels: i,
-  titleLabels: e,
-  chartType: a
-};
-export {
-  i as axisLabels,
-  a as chartType,
-  g as default,
-  e as titleLabels
-};

package/dist/chunks/messages.ca.js

@@ -1,48 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const e = "S'ha produït un error en carregar el gràfic.", a = "No es pot aplicar una transformació del registre a valors negatius o de zero.", t = "No es pot aplicar una transformació d'arrel quadrada a valors negatius.", r = "S'ha produït un error en carregar la capa. URL = ${ url }. ID d'element del portal = ${ portalItemId }.", n = "Els camps [${ fieldNames }] definits a la configuració no s'han trobat a la capa.", s = "L'element ${ dataPath } ha de ser únic. L'ID (${ seriesID }) de la sèrie anomenada ${ seriesName } ja l'utilitza una altra sèrie.", o = "${ dataPath } no pot dur a terme una agregació que no sigui de recompte en un camp que no sigui numèric.", i = "A ${ dataPath } li falta una propietat anomenada ${ missingProperty }.", d = "${ dataPath } no pot tenir menys de ${ limit } caràcters.", l = "${ dataPath } no pot tenir menys de ${ limit } elements.", c = "${ dataPath } no pot tenir més de ${ limit } elements.", u = "${ dataPath } ha de tenir almenys un caràcter que no sigui un espai en blanc.", p = "${ dataPath } no pot tenir ${ additionalProperty }.", m = "${ dataPath } ha de ser igual a un d'aquests valors permesos: ${ allowedValues }.", _ = "${ dataPath } ha de coincidir amb l'esquema d'un d'aquests: ${ schemaOptions }.", h = "No s'admeten gràfics de dispersió amb símbols proporcionals. S'ha aplicat la mida de símbol per defecte.", $ = "Error de lectura de les dades d'entrada.", g = "ó_The queryBins operation is not supported on this service______________________________à.", y = 'El tipus de sèrie esperat a l\'índex ${ seriesIndex } és "${ expectedType }", però s\'ha rebut el tipus "${ receivedType }"', P = "o", f = {
-  defaultError: e,
-  negativeValueInDataForLogTransformation: a,
-  negativeValueInDataForSqrtTransformation: t,
-  layerLoadFailure: r,
-  layerFieldsNotFound: n,
-  duplicateSeriesID: s,
-  nonNumericAggregation: o,
-  requiredProperty: i,
-  minLength: d,
-  minItems: l,
-  maxItems: c,
-  whiteSpacePattern: u,
-  additionalProperty: p,
-  enumValues: m,
-  anyOfValues: _,
-  bubbleChartValidateMsg: h,
-  queryError: $,
-  queryBinsNotSupported: g,
-  invalidSeriesType: y,
-  or: P
-};
-export {
-  p as additionalProperty,
-  _ as anyOfValues,
-  h as bubbleChartValidateMsg,
-  f as default,
-  e as defaultError,
-  s as duplicateSeriesID,
-  m as enumValues,
-  y as invalidSeriesType,
-  n as layerFieldsNotFound,
-  r as layerLoadFailure,
-  c as maxItems,
-  l as minItems,
-  d as minLength,
-  a as negativeValueInDataForLogTransformation,
-  t as negativeValueInDataForSqrtTransformation,
-  o as nonNumericAggregation,
-  P as or,
-  g as queryBinsNotSupported,
-  $ as queryError,
-  i as requiredProperty,
-  u as whiteSpacePattern
-};

package/dist/chunks/messages.ca2.js

@@ -1,22 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.9 */
-const e = { chart: "Gràfic", barChart: "Gràfic de barres", lineChart: "Gràfic de línies", pieChart: "Gràfic circular", histogram: "Histograma", scatterplot: "ó_Scatterplot____________à", boxPlot: "Diagrama de caixa" }, a = { mean: "Mitjana", median: "Mediana", sum: "Suma", discretePercentile: "Percentil discret", minimum: "Mínim", maximum: "Màxim", variance: "Variància", count: "Recompte", aggregation: "${ statistics } de ${ fieldName }", noAggregation: "Sense agregació" }, t = "Gràfic", i = "Recompte de sèries", s = "Eix X", r = "No disponible", c = { start: "Ajusta al primer punt de dades", end: "Ajusta a l'últim punt de dades" }, n = {
-  chartType: e,
-  statistics: a,
-  defaultTitle: t,
-  countSeries: i,
-  xAxis: s,
-  notAvailable: r,
-  timeAggregationTypes: c
-};
-export {
-  e as chartType,
-  i as countSeries,
-  n as default,
-  t as defaultTitle,
-  r as notAvailable,
-  a as statistics,
-  c as timeAggregationTypes,
-  s as xAxis
-};