@arcgis/charts-components 4.34.0-next.8 → 4.34.0-next.81

package/dist/chunks/messages.en-US.js

@@ -1,48 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.8 */
-const e = "An error occurred while loading the chart.", t = "Cannot apply a log transformation to negative or zero values.", a = "Cannot apply a square root transformation to negative values.", o = "An error occurred while loading the layer. URL = ${ url }. Portal item ID = ${ portalItemId }.", n = "The fields [${ fieldNames }] defined in the config were not found in the layer.", s = "${ dataPath } must be unique. The series named ${ seriesName } has an ID (${ seriesID }) that is already used by another series.", r = "${ dataPath } cannot perform non-count aggregation on non-numeric field.", i = "${ dataPath } is missing a property named ${ missingProperty }.", d = "${ dataPath } must not be shorter than ${ limit } characters.", l = "${ dataPath } must not have fewer than ${ limit } items.", c = "${ dataPath } must not have more than ${ limit } items.", h = "${ dataPath } must have at least one non-whitespace character.", u = "${ dataPath } must not have ${ additionalProperty }.", m = "${ dataPath } must be equal to one of these allowed values: ${ allowedValues }.", p = "${ dataPath } must match the schema of one of these: ${ schemaOptions }.", $ = "Scatterplots with proportional symbols are not supported. Default symbol size has been applied.", y = "Failure to read input data.", g = "The queryBins operation is not supported on this service.", f = "The expected series type at index ${ seriesIndex } is '${ expectedType }' but '${ receivedType }' was received instead", P = "or", v = {
-  defaultError: e,
-  negativeValueInDataForLogTransformation: t,
-  negativeValueInDataForSqrtTransformation: a,
-  layerLoadFailure: o,
-  layerFieldsNotFound: n,
-  duplicateSeriesID: s,
-  nonNumericAggregation: r,
-  requiredProperty: i,
-  minLength: d,
-  minItems: l,
-  maxItems: c,
-  whiteSpacePattern: h,
-  additionalProperty: u,
-  enumValues: m,
-  anyOfValues: p,
-  bubbleChartValidateMsg: $,
-  queryError: y,
-  queryBinsNotSupported: g,
-  invalidSeriesType: f,
-  or: P
-};
-export {
-  u as additionalProperty,
-  p as anyOfValues,
-  $ as bubbleChartValidateMsg,
-  v as default,
-  e as defaultError,
-  s as duplicateSeriesID,
-  m as enumValues,
-  f as invalidSeriesType,
-  n as layerFieldsNotFound,
-  o as layerLoadFailure,
-  c as maxItems,
-  l as minItems,
-  d as minLength,
-  t as negativeValueInDataForLogTransformation,
-  a as negativeValueInDataForSqrtTransformation,
-  r as nonNumericAggregation,
-  P as or,
-  g as queryBinsNotSupported,
-  y as queryError,
-  i as requiredProperty,
-  h as whiteSpacePattern
-};

package/dist/chunks/messages.en-US2.js

@@ -1,22 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.8 */
-const t = { chart: "Chart", barChart: "Bar chart", lineChart: "Line chart", pieChart: "Pie chart", histogram: "Histogram", scatterplot: "Scatterplot", boxPlot: "Box plot" }, a = { mean: "Mean", median: "Median", sum: "Sum", discretePercentile: "Discrete percentile", minimum: "Minimum", maximum: "Maximum", variance: "Variance", count: "Count", aggregation: "${ statistics } of ${ fieldName }", noAggregation: "No aggregation" }, e = "Chart", i = "Count Series", n = "X Axis", o = "Not Available", s = { start: "Snap to the first data point", end: "Snap to the last data point" }, r = {
-  chartType: t,
-  statistics: a,
-  defaultTitle: e,
-  countSeries: i,
-  xAxis: n,
-  notAvailable: o,
-  timeAggregationTypes: s
-};
-export {
-  t as chartType,
-  i as countSeries,
-  r as default,
-  e as defaultTitle,
-  o as notAvailable,
-  a as statistics,
-  s as timeAggregationTypes,
-  n as xAxis
-};

package/dist/chunks/messages.en-US3.js

@@ -1,77 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.8 */
-const e = "Play", o = "Stop", r = "Legend", t = "Loading", s = "Home", a = "Chart", n = "Series", i = "Export", l = "Image", d = "Data", c = "Print", m = {
-  "Zoom Out": "Zoom Out",
-  Play: e,
-  Stop: o,
-  Legend: r,
-  "Press ENTER to toggle": "Press ENTER to toggle",
-  Loading: t,
-  Home: s,
-  Chart: a,
-  "Serial chart": "Serial chart",
-  "X/Y chart": "X/Y chart",
-  "Pie chart": "Pie chart",
-  "Gauge chart": "Gauge chart",
-  "Radar chart": "Radar chart",
-  "Sankey diagram": "Sankey diagram",
-  "Flow diagram": "Flow diagram",
-  "Chord diagram": "Chord diagram",
-  "TreeMap chart": "TreeMap chart",
-  "Sliced chart": "Sliced chart",
-  Series: n,
-  "Candlestick Series": "Candlestick Series",
-  "OHLC Series": "OHLC Series",
-  "Column Series": "Column Series",
-  "Line Series": "Line Series",
-  "Pie Slice Series": "Pie Slice Series",
-  "Funnel Series": "Funnel Series",
-  "Pyramid Series": "Pyramid Series",
-  "X/Y Series": "X/Y Series",
-  Map: "Map",
-  "Press ENTER to zoom in": "Press ENTER to zoom in",
-  "Press ENTER to zoom out": "Press ENTER to zoom out",
-  "Use arrow keys to zoom in and out": "Use arrow keys to zoom in and out",
-  "Use plus and minus keys on your keyboard to zoom in and out": "Use plus and minus keys on your keyboard to zoom in and out",
-  Export: i,
-  Image: l,
-  Data: d,
-  Print: c,
-  "Press ENTER to open": "Press ENTER to open",
-  "Press ENTER to print.": "Press ENTER to print.",
-  "Press ENTER to export as %1.": "Press ENTER to export as %1.",
-  "(Press ESC to close this message)": "(Press ESC to close this message)",
-  "Image Export Complete": "Image Export Complete",
-  "Export operation took longer than expected. Something might have gone wrong.": "Export operation took longer than expected. Something might have gone wrong.",
-  "Saved from": "Saved from",
-  "Use TAB to select grip buttons or left and right arrows to change selection": "Use TAB to select grip buttons or left and right arrows to change selection",
-  "Use left and right arrows to move selection": "Use left and right arrows to move selection",
-  "Use left and right arrows to move left selection": "Use left and right arrows to move left selection",
-  "Use left and right arrows to move right selection": "Use left and right arrows to move right selection",
-  "Use TAB select grip buttons or up and down arrows to change selection": "Use TAB select grip buttons or up and down arrows to change selection",
-  "Use up and down arrows to move selection": "Use up and down arrows to move selection",
-  "Use up and down arrows to move lower selection": "Use up and down arrows to move lower selection",
-  "Use up and down arrows to move upper selection": "Use up and down arrows to move upper selection",
-  "From %1 to %2": "From %1 to %2",
-  "From %1": "From %1",
-  "To %1": "To %1",
-  "No parser available for file: %1": "No parser available for file: %1",
-  "Error parsing file: %1": "Error parsing file: %1",
-  "Unable to load file: %1": "Unable to load file: %1",
-  "Invalid date": "Invalid date"
-};
-export {
-  a as Chart,
-  d as Data,
-  i as Export,
-  s as Home,
-  l as Image,
-  r as Legend,
-  t as Loading,
-  e as Play,
-  c as Print,
-  n as Series,
-  o as Stop,
-  m as default
-};

package/dist/chunks/messages.en-US4.js

@@ -1,14 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.8 */
-const e = { percent: "Percent", values: "Values", standardizedValues: "Standardized values", count: "Count", aggregationOfValues: "${ aggregation } of values", aggregationOfFieldName: "${ aggregation } of ${ fieldName }" }, i = { aggrFieldsByCategory: "${ aggregationFields } by ${ category }", aggrTypeCategory: "${ aggregationType } by ${ category }", aggrTypeCategoryBySplitBy: "${ aggregationType } by ${ category } by ${ splitByField }", aggrTypeOfAggrFields: "${ aggregationType } of ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationType } of ${ aggregationField } by ${ category } by ${ splitByField }", aggrTypeOfAggrFieldsByCategory: "${ aggregationType } of ${ aggregationFields } by ${ category }", aggrFieldsByXAxisField: "${ aggregationFields } by ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType } by ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ aggregationType } by ${ xAxisField } by ${ splitByField }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationType } of ${ aggregationField } by ${ xAxisField } by ${ splitByField }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationType } of ${ aggregationFields } by ${ xAxisField }", distributionOfField: "Distribution of ${ valueField }", distributionOfFields: "Distribution of ${ valueFields }", distributionOfFieldsByCategory: "Distribution of ${ valueFields } by ${ category }", distributionOfFieldsByCategoryAndSplitBy: "Distribution of ${ valueFields } by ${ category } and ${ splitByField }", xAndY: "${ x } and ${ y }" }, g = { barChart: "Bar chart", lineChart: "Line chart", pieChart: "Pie chart", histogram: "Histogram", scatterplot: "Scatterplot" }, a = {
-  axisLabels: e,
-  titleLabels: i,
-  chartType: g
-};
-export {
-  e as axisLabels,
-  g as chartType,
-  a as default,
-  i as titleLabels
-};

package/dist/chunks/messages.en.js

@@ -1,48 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.8 */
-const e = "An error occurred while loading the chart.", t = "Cannot apply a log transformation to negative or zero values.", a = "Cannot apply a square root transformation to negative values.", o = "An error occurred while loading the layer. URL = ${ url }. Portal item ID = ${ portalItemId }.", n = "The fields [${ fieldNames }] defined in the config were not found in the layer.", s = "${ dataPath } must be unique. The series named ${ seriesName } has an ID (${ seriesID }) that is already used by another series.", r = "${ dataPath } cannot perform non-count aggregation on non-numeric field.", i = "${ dataPath } is missing a property named ${ missingProperty }.", d = "${ dataPath } must not be shorter than ${ limit } characters.", l = "${ dataPath } must not have fewer than ${ limit } items.", c = "${ dataPath } must not have more than ${ limit } items.", h = "${ dataPath } must have at least one non-whitespace character.", u = "${ dataPath } must not have ${ additionalProperty }.", m = "${ dataPath } must be equal to one of these allowed values: ${ allowedValues }.", p = "${ dataPath } must match the schema of one of these: ${ schemaOptions }.", $ = "Scatterplots with proportional symbols are not supported. Default symbol size has been applied.", y = "Failure to read input data.", g = "The queryBins operation is not supported on this service.", f = "The expected series type at index ${ seriesIndex } is '${ expectedType }' but '${ receivedType }' was received instead", P = "or", v = {
-  defaultError: e,
-  negativeValueInDataForLogTransformation: t,
-  negativeValueInDataForSqrtTransformation: a,
-  layerLoadFailure: o,
-  layerFieldsNotFound: n,
-  duplicateSeriesID: s,
-  nonNumericAggregation: r,
-  requiredProperty: i,
-  minLength: d,
-  minItems: l,
-  maxItems: c,
-  whiteSpacePattern: h,
-  additionalProperty: u,
-  enumValues: m,
-  anyOfValues: p,
-  bubbleChartValidateMsg: $,
-  queryError: y,
-  queryBinsNotSupported: g,
-  invalidSeriesType: f,
-  or: P
-};
-export {
-  u as additionalProperty,
-  p as anyOfValues,
-  $ as bubbleChartValidateMsg,
-  v as default,
-  e as defaultError,
-  s as duplicateSeriesID,
-  m as enumValues,
-  f as invalidSeriesType,
-  n as layerFieldsNotFound,
-  o as layerLoadFailure,
-  c as maxItems,
-  l as minItems,
-  d as minLength,
-  t as negativeValueInDataForLogTransformation,
-  a as negativeValueInDataForSqrtTransformation,
-  r as nonNumericAggregation,
-  P as or,
-  g as queryBinsNotSupported,
-  y as queryError,
-  i as requiredProperty,
-  h as whiteSpacePattern
-};

package/dist/chunks/messages.en2.js

@@ -1,22 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.8 */
-const t = { chart: "Chart", barChart: "Bar chart", lineChart: "Line chart", pieChart: "Pie chart", histogram: "Histogram", scatterplot: "Scatterplot", boxPlot: "Box plot" }, a = { mean: "Mean", median: "Median", sum: "Sum", discretePercentile: "Discrete percentile", minimum: "Minimum", maximum: "Maximum", variance: "Variance", count: "Count", aggregation: "${ statistics } of ${ fieldName }", noAggregation: "No aggregation" }, e = "Chart", i = "Count Series", n = "X Axis", o = "Not Available", s = { start: "Snap to the first data point", end: "Snap to the last data point" }, r = {
-  chartType: t,
-  statistics: a,
-  defaultTitle: e,
-  countSeries: i,
-  xAxis: n,
-  notAvailable: o,
-  timeAggregationTypes: s
-};
-export {
-  t as chartType,
-  i as countSeries,
-  r as default,
-  e as defaultTitle,
-  o as notAvailable,
-  a as statistics,
-  s as timeAggregationTypes,
-  n as xAxis
-};

package/dist/chunks/messages.en3.js

@@ -1,14 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.8 */
-const e = { percent: "Percent", values: "Values", standardizedValues: "Standardized values", count: "Count", aggregationOfValues: "${ aggregation } of values", aggregationOfFieldName: "${ aggregation } of ${ fieldName }" }, i = { aggrFieldsByCategory: "${ aggregationFields } by ${ category }", aggrTypeCategory: "${ aggregationType } by ${ category }", aggrTypeCategoryBySplitBy: "${ aggregationType } by ${ category } by ${ splitByField }", aggrTypeOfAggrFields: "${ aggregationType } of ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationType } of ${ aggregationField } by ${ category } by ${ splitByField }", aggrTypeOfAggrFieldsByCategory: "${ aggregationType } of ${ aggregationFields } by ${ category }", aggrFieldsByXAxisField: "${ aggregationFields } by ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType } by ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ aggregationType } by ${ xAxisField } by ${ splitByField }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationType } of ${ aggregationField } by ${ xAxisField } by ${ splitByField }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationType } of ${ aggregationFields } by ${ xAxisField }", distributionOfField: "Distribution of ${ valueField }", distributionOfFields: "Distribution of ${ valueFields }", distributionOfFieldsByCategory: "Distribution of ${ valueFields } by ${ category }", distributionOfFieldsByCategoryAndSplitBy: "Distribution of ${ valueFields } by ${ category } and ${ splitByField }", xAndY: "${ x } and ${ y }" }, g = { barChart: "Bar chart", lineChart: "Line chart", pieChart: "Pie chart", histogram: "Histogram", scatterplot: "Scatterplot" }, a = {
-  axisLabels: e,
-  titleLabels: i,
-  chartType: g
-};
-export {
-  e as axisLabels,
-  g as chartType,
-  a as default,
-  i as titleLabels
-};

package/dist/chunks/messages.es.js

@@ -1,48 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.8 */
-const e = "Se ha producido un error al cargar el gráfico.", a = "No se puede aplicar una transformación del registro a valores negativos o de cero.", o = "No se puede aplicar una transformación de raíz cuadrada a valores negativos.", n = "Se ha producido un error al cargar la capa. URL = ${ url }. Id. de elemento de portal = ${ portalItemId }.", r = "Los campos [${ fieldNames }] definidos en la configuración no se han encontrado en la capa.", t = "El elemento ${ dataPath } debe ser único. La serie denominada ${ seriesName } tiene un Id. (${ seriesID }) que ya se utiliza en otra serie.", s = "${ dataPath } no puede realizar una agregación no numérica en un campo no numérico.", i = "A ${ dataPath } le falta la propiedad denominada ${ missingProperty }.", d = "${ dataPath } no debe tener menos de ${ limit } caracteres.", c = "${ dataPath } no debe tener menos de ${ limit } elementos.", l = "${ dataPath } no debe tener más de ${ limit } elementos.", u = "${ dataPath } debe tener al menos un carácter que no sea un espacio en blanco.", m = "${ dataPath } no debe tener ${ additionalProperty }", p = "${ dataPath } debe ser igual a uno de los siguientes valores permitidos: ${ allowedValues }.", _ = "${ dataPath } debe coincidir con el esquema de uno de estos: ${ schemaOptions }.", $ = "No se admiten diagramas de dispersión con símbolos proporcionales. Se ha aplicado el tamaño de símbolo predeterminado.", g = "Error al leer los datos de entrada.", h = "á_The queryBins operation is not supported on this service______________________________Ó.", b = 'El tipo de serie esperado en el índice ${ seriesIndex } es "${ expectedType }", pero en su lugar se ha recibido "${ receivedType }"', P = "o", y = {
-  defaultError: e,
-  negativeValueInDataForLogTransformation: a,
-  negativeValueInDataForSqrtTransformation: o,
-  layerLoadFailure: n,
-  layerFieldsNotFound: r,
-  duplicateSeriesID: t,
-  nonNumericAggregation: s,
-  requiredProperty: i,
-  minLength: d,
-  minItems: c,
-  maxItems: l,
-  whiteSpacePattern: u,
-  additionalProperty: m,
-  enumValues: p,
-  anyOfValues: _,
-  bubbleChartValidateMsg: $,
-  queryError: g,
-  queryBinsNotSupported: h,
-  invalidSeriesType: b,
-  or: P
-};
-export {
-  m as additionalProperty,
-  _ as anyOfValues,
-  $ as bubbleChartValidateMsg,
-  y as default,
-  e as defaultError,
-  t as duplicateSeriesID,
-  p as enumValues,
-  b as invalidSeriesType,
-  r as layerFieldsNotFound,
-  n as layerLoadFailure,
-  l as maxItems,
-  c as minItems,
-  d as minLength,
-  a as negativeValueInDataForLogTransformation,
-  o as negativeValueInDataForSqrtTransformation,
-  s as nonNumericAggregation,
-  P as or,
-  h as queryBinsNotSupported,
-  g as queryError,
-  i as requiredProperty,
-  u as whiteSpacePattern
-};

package/dist/chunks/messages.es2.js

@@ -1,22 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.8 */
-const e = { chart: "Gráfico", barChart: "Gráfico de barras", lineChart: "Gráfico de líneas", pieChart: "Gráfico circular", histogram: "Histograma", scatterplot: "á_Scatterplot____________Ó", boxPlot: "Diagrama de caja" }, a = { mean: "Valor medio", median: "Mediana", sum: "Suma", discretePercentile: "Percentil discreto", minimum: "Mínimo", maximum: "Máximo", variance: "Varianza", count: "Recuento", aggregation: "${ statistics } de ${ fieldName }", noAggregation: "Sin agregación" }, t = "Gráfico", i = "Recuento de series", o = "Eje X", r = "No disponible", n = { start: "Alinear con el primer punto de datos", end: "Alinear con el último punto de datos" }, s = {
-  chartType: e,
-  statistics: a,
-  defaultTitle: t,
-  countSeries: i,
-  xAxis: o,
-  notAvailable: r,
-  timeAggregationTypes: n
-};
-export {
-  e as chartType,
-  i as countSeries,
-  s as default,
-  t as defaultTitle,
-  r as notAvailable,
-  a as statistics,
-  n as timeAggregationTypes,
-  o as xAxis
-};

package/dist/chunks/messages.es3.js

@@ -1,77 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.8 */
-const _ = "á_Play_________Ó", e = "á_Stop_________Ó", o = "á_Legend_____________Ó", r = "á_Loading_______________Ó", t = "á_Home_________Ó", s = "á_Chart___________Ó", a = "á_Series_____________Ó", n = "á_Export_____________Ó", i = "á_Image___________Ó", l = "á_Data_________Ó", d = "á_Print___________Ó", c = {
-  "Zoom Out": "á_Zoom Out_________________Ó",
-  Play: _,
-  Stop: e,
-  Legend: o,
-  "Press ENTER to toggle": "á_Press ENTER to toggle______________________Ó",
-  Loading: r,
-  Home: t,
-  Chart: s,
-  "Serial chart": "á_Serial chart_____________Ó",
-  "X/Y chart": "á_X/Y chart___________________Ó",
-  "Pie chart": "á_Pie chart___________________Ó",
-  "Gauge chart": "á_Gauge chart____________Ó",
-  "Radar chart": "á_Radar chart____________Ó",
-  "Sankey diagram": "á_Sankey diagram_______________Ó",
-  "Flow diagram": "á_Flow diagram_____________Ó",
-  "Chord diagram": "á_Chord diagram______________Ó",
-  "TreeMap chart": "á_TreeMap chart______________Ó",
-  "Sliced chart": "á_Sliced chart_____________Ó",
-  Series: a,
-  "Candlestick Series": "á_Candlestick Series___________________Ó",
-  "OHLC Series": "á_OHLC Series____________Ó",
-  "Column Series": "á_Column Series______________Ó",
-  "Line Series": "á_Line Series____________Ó",
-  "Pie Slice Series": "á_Pie Slice Series_________________Ó",
-  "Funnel Series": "á_Funnel Series______________Ó",
-  "Pyramid Series": "á_Pyramid Series_______________Ó",
-  "X/Y Series": "á_X/Y Series_____________________Ó",
-  Map: "á_Map_______Ó",
-  "Press ENTER to zoom in": "á_Press ENTER to zoom in_______________________Ó",
-  "Press ENTER to zoom out": "á_Press ENTER to zoom out________________________Ó",
-  "Use arrow keys to zoom in and out": "á_Use arrow keys to zoom in and out__________________Ó",
-  "Use plus and minus keys on your keyboard to zoom in and out": "á_Use plus and minus keys on your keyboard to zoom in and out_______________________________Ó",
-  Export: n,
-  Image: i,
-  Data: l,
-  Print: d,
-  "Press ENTER to open": "á_Press ENTER to open____________________Ó",
-  "Press ENTER to print.": "á_Press ENTER to print______________________Ó.",
-  "Press ENTER to export as %1.": "á_Press ENTER to export as %1_____________________________Ó.",
-  "(Press ESC to close this message)": "á_(Press ESC to close this message)__________________Ó",
-  "Image Export Complete": "á_Image Export Complete______________________Ó",
-  "Export operation took longer than expected. Something might have gone wrong.": "á_Export operation took longer than expected. Something might have gone wrong_______________________________________Ó.",
-  "Saved from": "á_Saved from_____________________Ó",
-  "Use TAB to select grip buttons or left and right arrows to change selection": "á_Use TAB to select grip buttons or left and right arrows to change selection_______________________________________Ó",
-  "Use left and right arrows to move selection": "á_Use left and right arrows to move selection_______________________Ó",
-  "Use left and right arrows to move left selection": "á_Use left and right arrows to move left selection_________________________Ó",
-  "Use left and right arrows to move right selection": "á_Use left and right arrows to move right selection__________________________Ó",
-  "Use TAB select grip buttons or up and down arrows to change selection": "á_Use TAB select grip buttons or up and down arrows to change selection____________________________________Ó",
-  "Use up and down arrows to move selection": "á_Use up and down arrows to move selection_____________________Ó",
-  "Use up and down arrows to move lower selection": "á_Use up and down arrows to move lower selection________________________Ó",
-  "Use up and down arrows to move upper selection": "á_Use up and down arrows to move upper selection________________________Ó",
-  "From %1 to %2": "á_From %1 to %2______________Ó",
-  "From %1": "á_From %1_______________Ó",
-  "To %1": "á_To %1___________Ó",
-  "No parser available for file: %1": "á_No parser available for file: %1_________________Ó",
-  "Error parsing file: %1": "á_Error parsing file: %1_______________________Ó",
-  "Unable to load file: %1": "á_Unable to load file: %1________________________Ó",
-  "Invalid date": "á_Invalid date_____________Ó"
-};
-export {
-  s as Chart,
-  l as Data,
-  n as Export,
-  t as Home,
-  i as Image,
-  o as Legend,
-  r as Loading,
-  _ as Play,
-  d as Print,
-  a as Series,
-  e as Stop,
-  c as default
-};

package/dist/chunks/messages.es4.js

@@ -1,14 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.8 */
-const e = { percent: "Porcentaje", values: "Valores", standardizedValues: "Valores estandarizados", count: "Recuento", aggregationOfValues: "${ aggregation } de valores", aggregationOfFieldName: "${ aggregation } de ${ fieldName }" }, i = { aggrFieldsByCategory: "${ aggregationFields } por ${ category }", aggrTypeCategory: "${ aggregationType } por ${ category }", aggrTypeCategoryBySplitBy: "${ aggregationType } por ${ category } por ${ splitByField }", aggrTypeOfAggrFields: "${ aggregationType } de ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationType } de ${ aggregationField } por ${ category } por ${ splitByField }", aggrTypeOfAggrFieldsByCategory: "${ aggregationType } de ${ aggregationFields } por ${ category }", aggrFieldsByXAxisField: "${ aggregationFields } por ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType } por ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ aggregationType } por ${ xAxisField } por ${ splitByField }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationType } de ${ aggregationField } por ${ xAxisField } por ${ splitByField }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationType } de ${ aggregationFields } por ${ xAxisField }", distributionOfField: "Distribución de ${ valueField }", distributionOfFields: "Distribución de ${ valueFields }", distributionOfFieldsByCategory: "Distribución de ${ valueFields } por ${ category }", distributionOfFieldsByCategoryAndSplitBy: "Distribución de ${ valueFields } por ${ category } y ${ splitByField }", xAndY: "${ x } y ${ y }" }, g = { barChart: "Gráfico de barras", lineChart: "Gráfico de líneas", pieChart: "Gráfico circular", histogram: "Histograma", scatterplot: "á_Scatterplot____________Ó" }, a = {
-  axisLabels: e,
-  titleLabels: i,
-  chartType: g
-};
-export {
-  e as axisLabels,
-  g as chartType,
-  a as default,
-  i as titleLabels
-};

package/dist/chunks/messages.et.js

@@ -1,48 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.8 */
-const e = "Diagrammi laadimisel ilmnes viga.", a = "Logi teisendamisel ei saa kasutada negatiivseid väärtusi ega nullväärtusi.", t = "Ruutjuure teisendamist ei saa rakendada negatiivsetele väärtustele.", i = "Kihi laadimisel tekkis viga. URL = ${ url }. Portaaliüksuse ID = ${ portalItemId }.", s = "Konfiguratsioonis määratletud välju [${ fieldNames }] kihis ei leitud.", o = "${ dataPath } peab olema kordumatu. Seerial nimega ${ seriesName } on ID (${ seriesID }), mida kasutatakse juba muudes seeriates.", n = "${ dataPath } ei tohi mittenumbrilisel väljal teha loendamisega mitteseotud agregeerimist.", u = "Omadusel ${ dataPath } puudub omadus nimega ${ missingProperty }.", r = "${ dataPath } ei tohi olla lühem kui ${ limit } märki.", l = "Muutujal ${ dataPath } ei tohi olla vähem kui ${ limit } üksust.", d = "Muutujal ${ dataPath } ei tohi olla rohkem kui ${ limit } üksust.", m = "${ dataPath } peab sisaldama vähemalt ühte märki, mis pole tühimärk.", h = "Muutujal ${ dataPath } ei tohi olla: ${ additionalProperty }.", _ = "${ dataPath } peab võrduma ühega allpool nimetatud väärtustest: ${ allowedValues }.", c = "${ dataPath } peab vastama ühele nendest skeemidest: ${ schemaOptions }.", p = "Proportsionaalsete sümbolitega hajuvusdiagramme ei toetata. Rakendatud on sümboli vaikesuurus.", g = "Sisendandmete lugemine nurjus.", $ = "Š_The queryBins operation is not supported on this service______________________________ä.", k = "Eeldatud seeriatüüp indeksis ${ seriesIndex } on '${ expectedType }', kuid saadi hoopis '${ receivedType }'", v = "või", P = {
-  defaultError: e,
-  negativeValueInDataForLogTransformation: a,
-  negativeValueInDataForSqrtTransformation: t,
-  layerLoadFailure: i,
-  layerFieldsNotFound: s,
-  duplicateSeriesID: o,
-  nonNumericAggregation: n,
-  requiredProperty: u,
-  minLength: r,
-  minItems: l,
-  maxItems: d,
-  whiteSpacePattern: m,
-  additionalProperty: h,
-  enumValues: _,
-  anyOfValues: c,
-  bubbleChartValidateMsg: p,
-  queryError: g,
-  queryBinsNotSupported: $,
-  invalidSeriesType: k,
-  or: v
-};
-export {
-  h as additionalProperty,
-  c as anyOfValues,
-  p as bubbleChartValidateMsg,
-  P as default,
-  e as defaultError,
-  o as duplicateSeriesID,
-  _ as enumValues,
-  k as invalidSeriesType,
-  s as layerFieldsNotFound,
-  i as layerLoadFailure,
-  d as maxItems,
-  l as minItems,
-  r as minLength,
-  a as negativeValueInDataForLogTransformation,
-  t as negativeValueInDataForSqrtTransformation,
-  n as nonNumericAggregation,
-  v as or,
-  $ as queryBinsNotSupported,
-  g as queryError,
-  u as requiredProperty,
-  m as whiteSpacePattern
-};

package/dist/chunks/messages.et2.js

@@ -1,22 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.8 */
-const a = { chart: "Diagramm", barChart: "Lintdiagramm", lineChart: "Joondiagramm", pieChart: "Sektordiagramm", histogram: "Histogramm", scatterplot: "Š_Scatterplot____________ä", boxPlot: "Karpdiagramm" }, e = { mean: "Keskmine", median: "Keskmine", sum: "Summa", discretePercentile: "Diskreetne protsentiil", minimum: "Miinimum", maximum: "Maksimum", variance: "Dispersioon", count: "Kogus", aggregation: "${ statistics } /${ fieldName }", noAggregation: "Agregeerimist pole" }, t = "Diagramm", i = "Sarjade arv", s = "X-telg", m = "Pole kättesaadav", n = { start: "Haagi esimesse andmepunkti", end: "Haagi viimasesse andmepunkti" }, r = {
-  chartType: a,
-  statistics: e,
-  defaultTitle: t,
-  countSeries: i,
-  xAxis: s,
-  notAvailable: m,
-  timeAggregationTypes: n
-};
-export {
-  a as chartType,
-  i as countSeries,
-  r as default,
-  t as defaultTitle,
-  m as notAvailable,
-  e as statistics,
-  n as timeAggregationTypes,
-  s as xAxis
-};

package/dist/chunks/messages.et3.js

@@ -1,77 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.8 */
-const _ = "Š_Play_________ä", e = "Š_Stop_________ä", o = "Š_Legend_____________ä", r = "Š_Loading_______________ä", t = "Š_Home_________ä", s = "Š_Chart___________ä", a = "Š_Series_____________ä", n = "Š_Export_____________ä", i = "Š_Image___________ä", l = "Š_Data_________ä", d = "Š_Print___________ä", c = {
-  "Zoom Out": "Š_Zoom Out_________________ä",
-  Play: _,
-  Stop: e,
-  Legend: o,
-  "Press ENTER to toggle": "Š_Press ENTER to toggle______________________ä",
-  Loading: r,
-  Home: t,
-  Chart: s,
-  "Serial chart": "Š_Serial chart_____________ä",
-  "X/Y chart": "Š_X/Y chart___________________ä",
-  "Pie chart": "Š_Pie chart___________________ä",
-  "Gauge chart": "Š_Gauge chart____________ä",
-  "Radar chart": "Š_Radar chart____________ä",
-  "Sankey diagram": "Š_Sankey diagram_______________ä",
-  "Flow diagram": "Š_Flow diagram_____________ä",
-  "Chord diagram": "Š_Chord diagram______________ä",
-  "TreeMap chart": "Š_TreeMap chart______________ä",
-  "Sliced chart": "Š_Sliced chart_____________ä",
-  Series: a,
-  "Candlestick Series": "Š_Candlestick Series___________________ä",
-  "OHLC Series": "Š_OHLC Series____________ä",
-  "Column Series": "Š_Column Series______________ä",
-  "Line Series": "Š_Line Series____________ä",
-  "Pie Slice Series": "Š_Pie Slice Series_________________ä",
-  "Funnel Series": "Š_Funnel Series______________ä",
-  "Pyramid Series": "Š_Pyramid Series_______________ä",
-  "X/Y Series": "Š_X/Y Series_____________________ä",
-  Map: "Š_Map_______ä",
-  "Press ENTER to zoom in": "Š_Press ENTER to zoom in_______________________ä",
-  "Press ENTER to zoom out": "Š_Press ENTER to zoom out________________________ä",
-  "Use arrow keys to zoom in and out": "Š_Use arrow keys to zoom in and out__________________ä",
-  "Use plus and minus keys on your keyboard to zoom in and out": "Š_Use plus and minus keys on your keyboard to zoom in and out_______________________________ä",
-  Export: n,
-  Image: i,
-  Data: l,
-  Print: d,
-  "Press ENTER to open": "Š_Press ENTER to open____________________ä",
-  "Press ENTER to print.": "Š_Press ENTER to print______________________ä.",
-  "Press ENTER to export as %1.": "Š_Press ENTER to export as %1_____________________________ä.",
-  "(Press ESC to close this message)": "Š_(Press ESC to close this message)__________________ä",
-  "Image Export Complete": "Š_Image Export Complete______________________ä",
-  "Export operation took longer than expected. Something might have gone wrong.": "Š_Export operation took longer than expected. Something might have gone wrong_______________________________________ä.",
-  "Saved from": "Š_Saved from_____________________ä",
-  "Use TAB to select grip buttons or left and right arrows to change selection": "Š_Use TAB to select grip buttons or left and right arrows to change selection_______________________________________ä",
-  "Use left and right arrows to move selection": "Š_Use left and right arrows to move selection_______________________ä",
-  "Use left and right arrows to move left selection": "Š_Use left and right arrows to move left selection_________________________ä",
-  "Use left and right arrows to move right selection": "Š_Use left and right arrows to move right selection__________________________ä",
-  "Use TAB select grip buttons or up and down arrows to change selection": "Š_Use TAB select grip buttons or up and down arrows to change selection____________________________________ä",
-  "Use up and down arrows to move selection": "Š_Use up and down arrows to move selection_____________________ä",
-  "Use up and down arrows to move lower selection": "Š_Use up and down arrows to move lower selection________________________ä",
-  "Use up and down arrows to move upper selection": "Š_Use up and down arrows to move upper selection________________________ä",
-  "From %1 to %2": "Š_From %1 to %2______________ä",
-  "From %1": "Š_From %1_______________ä",
-  "To %1": "Š_To %1___________ä",
-  "No parser available for file: %1": "Š_No parser available for file: %1_________________ä",
-  "Error parsing file: %1": "Š_Error parsing file: %1_______________________ä",
-  "Unable to load file: %1": "Š_Unable to load file: %1________________________ä",
-  "Invalid date": "Š_Invalid date_____________ä"
-};
-export {
-  s as Chart,
-  l as Data,
-  n as Export,
-  t as Home,
-  i as Image,
-  o as Legend,
-  r as Loading,
-  _ as Play,
-  d as Print,
-  a as Series,
-  e as Stop,
-  c as default
-};

package/dist/chunks/messages.et4.js

@@ -1,14 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.8 */
-const e = { percent: "Protsent", values: "Väärtused", standardizedValues: "Standardiseeritud väärtused", count: "Kogus", aggregationOfValues: "${ aggregation } väärtustel", aggregationOfFieldName: "${ aggregation } /${ fieldName }" }, g = { aggrFieldsByCategory: "${ aggregationFields } : ${ category }", aggrTypeCategory: "${ aggregationType } : ${ category }", aggrTypeCategoryBySplitBy: "${ aggregationType } : ${ category } : ${ splitByField }", aggrTypeOfAggrFields: "${ aggregationType }/${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationType } / ${ aggregationField } : ${ category } : ${ splitByField }", aggrTypeOfAggrFieldsByCategory: "${ aggregationType } / ${ aggregationFields } : ${ category }", aggrFieldsByXAxisField: "${ aggregationFields } : ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType } : ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ aggregationType } : ${ xAxisField } : ${ splitByField }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationType } / ${ aggregationField } : ${ xAxisField } : ${ splitByField }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationType } / ${ aggregationFields } : ${ xAxisField }", distributionOfField: "${ valueField } jaotus", distributionOfFields: "${ valueFields } jaotus", distributionOfFieldsByCategory: "${ valueFields } jaotus ${ category } alusel", distributionOfFieldsByCategoryAndSplitBy: "${ valueFields } jaotus ${ category } ja ${ splitByField } alusel", xAndY: "${ x } ja ${ y }" }, a = { barChart: "Lintdiagramm", lineChart: "Joondiagramm", pieChart: "Sektordiagramm", histogram: "Histogramm", scatterplot: "Š_Scatterplot____________ä" }, i = {
-  axisLabels: e,
-  titleLabels: g,
-  chartType: a
-};
-export {
-  e as axisLabels,
-  a as chartType,
-  i as default,
-  g as titleLabels
-};