@arcgis/charts-components 4.34.0-next.16 → 4.34.0-next.161

package/dist/chunks/messages.nl.js

@@ -1,48 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.16 */
-const e = "Er is een fout opgetreden bij het laden van de grafiek.", n = "Kan logtransformatie niet toepassen op negatieve of nulwaarden.", t = "Kan transformatie vierkantswortel niet toepassen op negatieve waarden.", a = "Er is een fout opgetreden bij het laden van de laag. URL = ${ url }. Portal item ID = ${ portalItemId }.", i = "De velden [${ fieldNames }] die in de config zijn gedefinieerd, zijn niet aangetroffen in de laag.", o = "${ dataPath } moet uniek zijn. De serie genaamd ${ seriesName } heeft een ID (${ seriesID }) die al wordt gebruikt door een andere serie.", r = "${ dataPath } kan geen niet-telbare aggregatie uitvoeren op een niet-numeriek veld.", s = "${ dataPath } mist een eigenschap met de naam ${ missingProperty }.", d = "${ dataPath } mag niet korter zijn dan ${ limit } tekens.", m = "${ dataPath } mag niet minder dan ${ limit } items hebben.", l = "${ dataPath } mag niet meer dan ${ limit } items hebben.", g = "${ dataPath } moet minstens één non-whitespace teken hebben.", c = "${ dataPath } mag geen ${ additionalProperty } hebben.", p = "${ dataPath } moet gelijk zijn aan een van deze toegelaten waarden: ${ allowedValues }.", _ = "${ dataPath } moet overeenkomen met het schema van een van deze: ${ schemaOptions }.", h = "Spreidingsdiagrammen met proportionele symbolen worden niet ondersteund. Standaardsymboolgrootte is toegepast.", u = "Kan invoergegevens niet lezen.", $ = "IJ_The queryBins operation is not supported on this service______________________________ä.", v = "Het verwachte serietype bij index ${ seriesIndex } is '${ expectedType }' maar '${ receivedType }' is in plaats daarvan ontvangen", b = "of", f = {
-  defaultError: e,
-  negativeValueInDataForLogTransformation: n,
-  negativeValueInDataForSqrtTransformation: t,
-  layerLoadFailure: a,
-  layerFieldsNotFound: i,
-  duplicateSeriesID: o,
-  nonNumericAggregation: r,
-  requiredProperty: s,
-  minLength: d,
-  minItems: m,
-  maxItems: l,
-  whiteSpacePattern: g,
-  additionalProperty: c,
-  enumValues: p,
-  anyOfValues: _,
-  bubbleChartValidateMsg: h,
-  queryError: u,
-  queryBinsNotSupported: $,
-  invalidSeriesType: v,
-  or: b
-};
-export {
-  c as additionalProperty,
-  _ as anyOfValues,
-  h as bubbleChartValidateMsg,
-  f as default,
-  e as defaultError,
-  o as duplicateSeriesID,
-  p as enumValues,
-  v as invalidSeriesType,
-  i as layerFieldsNotFound,
-  a as layerLoadFailure,
-  l as maxItems,
-  m as minItems,
-  d as minLength,
-  n as negativeValueInDataForLogTransformation,
-  t as negativeValueInDataForSqrtTransformation,
-  r as nonNumericAggregation,
-  b as or,
-  $ as queryBinsNotSupported,
-  u as queryError,
-  s as requiredProperty,
-  g as whiteSpacePattern
-};

package/dist/chunks/messages.nl2.js

@@ -1,22 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.16 */
-const e = { chart: "Diagram", barChart: "Staafdiagram", lineChart: "Lijndiagram", pieChart: "Cirkeldiagram", histogram: "Histogram", scatterplot: "IJ_Scatterplot____________ä", boxPlot: "Boxplot" }, t = { mean: "Gemiddelde", median: "Mediaan", sum: "Som", discretePercentile: "Discreet percentiel", minimum: "Minimum", maximum: "Maximum", variance: "Variantie", count: "Aantal", aggregation: "${ statistics } van ${ fieldName }", noAggregation: "Geen aggregatie" }, a = "Diagram", i = "Tellingserie", n = "X-as", s = "Niet beschikbaar", r = { start: "Koppelen met het eerste gegevenspunt", end: "Koppelen met het laatste gegevenspunt" }, m = {
-  chartType: e,
-  statistics: t,
-  defaultTitle: a,
-  countSeries: i,
-  xAxis: n,
-  notAvailable: s,
-  timeAggregationTypes: r
-};
-export {
-  e as chartType,
-  i as countSeries,
-  m as default,
-  a as defaultTitle,
-  s as notAvailable,
-  t as statistics,
-  r as timeAggregationTypes,
-  n as xAxis
-};

package/dist/chunks/messages.nl3.js

@@ -1,77 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.16 */
-const _ = "IJ_Play_________ä", e = "IJ_Stop_________ä", o = "IJ_Legend_____________ä", r = "IJ_Loading_______________ä", t = "IJ_Home_________ä", s = "IJ_Chart___________ä", a = "IJ_Series_____________ä", n = "IJ_Export_____________ä", i = "IJ_Image___________ä", l = "IJ_Data_________ä", d = "IJ_Print___________ä", c = {
-  "Zoom Out": "IJ_Zoom Out_________________ä",
-  Play: _,
-  Stop: e,
-  Legend: o,
-  "Press ENTER to toggle": "IJ_Press ENTER to toggle______________________ä",
-  Loading: r,
-  Home: t,
-  Chart: s,
-  "Serial chart": "IJ_Serial chart_____________ä",
-  "X/Y chart": "IJ_X/Y chart___________________ä",
-  "Pie chart": "IJ_Pie chart___________________ä",
-  "Gauge chart": "IJ_Gauge chart____________ä",
-  "Radar chart": "IJ_Radar chart____________ä",
-  "Sankey diagram": "IJ_Sankey diagram_______________ä",
-  "Flow diagram": "IJ_Flow diagram_____________ä",
-  "Chord diagram": "IJ_Chord diagram______________ä",
-  "TreeMap chart": "IJ_TreeMap chart______________ä",
-  "Sliced chart": "IJ_Sliced chart_____________ä",
-  Series: a,
-  "Candlestick Series": "IJ_Candlestick Series___________________ä",
-  "OHLC Series": "IJ_OHLC Series____________ä",
-  "Column Series": "IJ_Column Series______________ä",
-  "Line Series": "IJ_Line Series____________ä",
-  "Pie Slice Series": "IJ_Pie Slice Series_________________ä",
-  "Funnel Series": "IJ_Funnel Series______________ä",
-  "Pyramid Series": "IJ_Pyramid Series_______________ä",
-  "X/Y Series": "IJ_X/Y Series_____________________ä",
-  Map: "IJ_Map_______ä",
-  "Press ENTER to zoom in": "IJ_Press ENTER to zoom in_______________________ä",
-  "Press ENTER to zoom out": "IJ_Press ENTER to zoom out________________________ä",
-  "Use arrow keys to zoom in and out": "IJ_Use arrow keys to zoom in and out__________________ä",
-  "Use plus and minus keys on your keyboard to zoom in and out": "IJ_Use plus and minus keys on your keyboard to zoom in and out_______________________________ä",
-  Export: n,
-  Image: i,
-  Data: l,
-  Print: d,
-  "Press ENTER to open": "IJ_Press ENTER to open____________________ä",
-  "Press ENTER to print.": "IJ_Press ENTER to print______________________ä.",
-  "Press ENTER to export as %1.": "IJ_Press ENTER to export as %1_____________________________ä.",
-  "(Press ESC to close this message)": "IJ_(Press ESC to close this message)__________________ä",
-  "Image Export Complete": "IJ_Image Export Complete______________________ä",
-  "Export operation took longer than expected. Something might have gone wrong.": "IJ_Export operation took longer than expected. Something might have gone wrong_______________________________________ä.",
-  "Saved from": "IJ_Saved from_____________________ä",
-  "Use TAB to select grip buttons or left and right arrows to change selection": "IJ_Use TAB to select grip buttons or left and right arrows to change selection_______________________________________ä",
-  "Use left and right arrows to move selection": "IJ_Use left and right arrows to move selection_______________________ä",
-  "Use left and right arrows to move left selection": "IJ_Use left and right arrows to move left selection_________________________ä",
-  "Use left and right arrows to move right selection": "IJ_Use left and right arrows to move right selection__________________________ä",
-  "Use TAB select grip buttons or up and down arrows to change selection": "IJ_Use TAB select grip buttons or up and down arrows to change selection____________________________________ä",
-  "Use up and down arrows to move selection": "IJ_Use up and down arrows to move selection_____________________ä",
-  "Use up and down arrows to move lower selection": "IJ_Use up and down arrows to move lower selection________________________ä",
-  "Use up and down arrows to move upper selection": "IJ_Use up and down arrows to move upper selection________________________ä",
-  "From %1 to %2": "IJ_From %1 to %2______________ä",
-  "From %1": "IJ_From %1_______________ä",
-  "To %1": "IJ_To %1___________ä",
-  "No parser available for file: %1": "IJ_No parser available for file: %1_________________ä",
-  "Error parsing file: %1": "IJ_Error parsing file: %1_______________________ä",
-  "Unable to load file: %1": "IJ_Unable to load file: %1________________________ä",
-  "Invalid date": "IJ_Invalid date_____________ä"
-};
-export {
-  s as Chart,
-  l as Data,
-  n as Export,
-  t as Home,
-  i as Image,
-  o as Legend,
-  r as Loading,
-  _ as Play,
-  d as Print,
-  a as Series,
-  e as Stop,
-  c as default
-};

package/dist/chunks/messages.nl4.js

@@ -1,14 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.16 */
-const e = { percent: "Procent", values: "Waarden", standardizedValues: "Gestandaardiseerde waarden", count: "Aantal", aggregationOfValues: "${ aggregation } van waarden", aggregationOfFieldName: "${ aggregation } van ${ fieldName }" }, a = { aggrFieldsByCategory: "${ aggregationFields } door ${ category }", aggrTypeCategory: "${ aggregationType } door ${ category }", aggrTypeCategoryBySplitBy: "${ aggregationType } door ${ category } door ${ splitByField }", aggrTypeOfAggrFields: "${ aggregationType } van ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationType } van ${ aggregationField } door ${ category } door ${ splitByField }", aggrTypeOfAggrFieldsByCategory: "${ aggregationType } van ${ aggregationFields } door ${ category }", aggrFieldsByXAxisField: "${ aggregationFields } door ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType } door ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ aggregationType } door ${ xAxisField } door ${ splitByField }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationType } van ${ aggregationField } door ${ xAxisField } door ${ splitByField }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationType } van ${ aggregationFields } door ${ xAxisField }", distributionOfField: "Distributie van ${ valueField }", distributionOfFields: "Distributie van ${ valueFields }", distributionOfFieldsByCategory: "Distributie van ${ valueFields } op ${ category }", distributionOfFieldsByCategoryAndSplitBy: "Distributie van ${ valueFields } op ${ category } en ${ splitByField }", xAndY: "${ x } en ${ y }" }, i = { barChart: "Staafdiagram", lineChart: "Lijndiagram", pieChart: "Cirkeldiagram", histogram: "Histogram", scatterplot: "IJ_Scatterplot____________ä" }, g = {
-  axisLabels: e,
-  titleLabels: a,
-  chartType: i
-};
-export {
-  e as axisLabels,
-  i as chartType,
-  g as default,
-  a as titleLabels
-};

package/dist/chunks/messages.no.js

@@ -1,48 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.16 */
-const e = "Det oppsto en feil under innlasting av diagrammet.", t = "Loggtransformasjon kan ikke brukes på negative verdier eller nullverdier.", n = "Kvadratrottransformasjon kan ikke brukes på negative verdier.", a = "Det oppsto en feil under innlasting av laget. URL = ${ url }. Portalelement-ID = ${ portalItemId }.", r = "Feltene [${ fieldNames }] som er definert i konfigurasjonen, ble ikke funnet i laget.", i = "${ dataPath } må være unik. Serien med navnet ${ seriesName } har en ID (${ seriesID }) som allerede brukes av en annen serie.", s = "${ dataPath } kan ikke utføre aggregering av annet enn antall på ikke-numeriske felt.", o = "${ dataPath } mangler en egenskap ved navn ${ missingProperty }.", l = "${ dataPath } må ikke være kortere enn ${ limit } tegn.", d = "${ dataPath } kan ikke inneholde færre enn ${ limit } elementer.", m = "${ limit } kan ikke inneholde flere enn ${ dataPath } elementer.", k = "${ dataPath } må inneholde minst ett tegn som ikke er mellomrom.", u = "${ dataPath } kan ikke ha ${ additionalProperty }.", _ = "${ dataPath } må være lik én av følgende tillatte verdier: ${ allowedValues }.", g = "${ dataPath } må samsvare med skjemaet for én av følgende: ${ schemaOptions }.", p = "Punktdiagrammer med proporsjonale symboler støttes ikke. Standard symbolstørrelse er brukt.", c = "Kan ikke lese inndata.", v = "å_The queryBins operation is not supported on this service______________________________ø.", $ = "Forventet serietype ved indeks ${ seriesIndex } er ${ expectedType }, men ${ receivedType } ble mottatt i stedet", h = "eller", f = {
-  defaultError: e,
-  negativeValueInDataForLogTransformation: t,
-  negativeValueInDataForSqrtTransformation: n,
-  layerLoadFailure: a,
-  layerFieldsNotFound: r,
-  duplicateSeriesID: i,
-  nonNumericAggregation: s,
-  requiredProperty: o,
-  minLength: l,
-  minItems: d,
-  maxItems: m,
-  whiteSpacePattern: k,
-  additionalProperty: u,
-  enumValues: _,
-  anyOfValues: g,
-  bubbleChartValidateMsg: p,
-  queryError: c,
-  queryBinsNotSupported: v,
-  invalidSeriesType: $,
-  or: h
-};
-export {
-  u as additionalProperty,
-  g as anyOfValues,
-  p as bubbleChartValidateMsg,
-  f as default,
-  e as defaultError,
-  i as duplicateSeriesID,
-  _ as enumValues,
-  $ as invalidSeriesType,
-  r as layerFieldsNotFound,
-  a as layerLoadFailure,
-  m as maxItems,
-  d as minItems,
-  l as minLength,
-  t as negativeValueInDataForLogTransformation,
-  n as negativeValueInDataForSqrtTransformation,
-  s as nonNumericAggregation,
-  h as or,
-  v as queryBinsNotSupported,
-  c as queryError,
-  o as requiredProperty,
-  k as whiteSpacePattern
-};

package/dist/chunks/messages.no2.js

@@ -1,22 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.16 */
-const t = { chart: "Diagram", barChart: "Stolpediagram", lineChart: "Linjediagram", pieChart: "Sektordiagram", histogram: "Histogram", scatterplot: "å_Scatterplot____________ø", boxPlot: "Boksdiagram" }, a = { mean: "Gjennomsnitt", median: "Median", sum: "Sum", discretePercentile: "Diskret persentil", minimum: "Minimum", maximum: "Maksimum", variance: "Varians", count: "Antall", aggregation: "${ statistics } av ${ fieldName }", noAggregation: "Ingen sammenslåing" }, e = "Diagram", i = "Tallserie", s = "X-akse", n = "Ikke tilgjengelig", r = { start: "Fest til det første datapunktet", end: "Fest til det siste datapunktet" }, m = {
-  chartType: t,
-  statistics: a,
-  defaultTitle: e,
-  countSeries: i,
-  xAxis: s,
-  notAvailable: n,
-  timeAggregationTypes: r
-};
-export {
-  t as chartType,
-  i as countSeries,
-  m as default,
-  e as defaultTitle,
-  n as notAvailable,
-  a as statistics,
-  r as timeAggregationTypes,
-  s as xAxis
-};

package/dist/chunks/messages.no3.js

@@ -1,14 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.16 */
-const e = { percent: "Prosent", values: "Verdier", standardizedValues: "Standardiserte verdier", count: "Antall", aggregationOfValues: "${ aggregation } av verdier", aggregationOfFieldName: "${ aggregation } av ${ fieldName }" }, i = { aggrFieldsByCategory: "${ aggregationFields } av ${ category }", aggrTypeCategory: "${ aggregationType } av ${ category }", aggrTypeCategoryBySplitBy: "${ aggregationType } etter ${ category } etter ${ splitByField }", aggrTypeOfAggrFields: "${ aggregationType } av ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationType } av ${ aggregationField } etter ${ category } etter ${ splitByField }", aggrTypeOfAggrFieldsByCategory: "${ aggregationType } av ${ aggregationFields } etter ${ category }", aggrFieldsByXAxisField: "${ aggregationFields } av ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType } av ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ aggregationType } etter ${ xAxisField } etter ${ splitByField }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationType } av ${ aggregationField } etter ${ xAxisField } etter ${ splitByField }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationType } av ${ aggregationFields } etter ${ xAxisField }", distributionOfField: "Distribusjon av ${ valueField }", distributionOfFields: "Distribusjon av ${ valueFields }", distributionOfFieldsByCategory: "Distribusjon av ${ valueFields } etter ${ category }", distributionOfFieldsByCategoryAndSplitBy: "Distribusjon av ${ valueFields } etter ${ category } og ${ splitByField }", xAndY: "${ x } og ${ y }" }, a = { barChart: "Stolpediagram", lineChart: "Linjediagram", pieChart: "Sektordiagram", histogram: "Histogram", scatterplot: "å_Scatterplot____________ø" }, g = {
-  axisLabels: e,
-  titleLabels: i,
-  chartType: a
-};
-export {
-  e as axisLabels,
-  a as chartType,
-  g as default,
-  i as titleLabels
-};

package/dist/chunks/messages.pl.js

@@ -1,48 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.16 */
-const e = "Wystąpił błąd podczas wczytywania diagramu.", a = "Nie można zastosować transformacji Logarytm do wartości ujemnych lub równych zero.", n = "Nie można zastosować transformacji Pierwiastek kwadratowy do wartości ujemnych.", t = "Wystąpił błąd podczas wczytywania warstwy. URL = ${ url }. Identyfikator elementu portalu = ${ portalItemId }.", i = "Zdefiniowane w konfiguracji pola [${ fieldNames }] nie zostały znalezione w warstwie.", o = "Nazwa ${ dataPath } musi być unikalna. Seria o nazwie ${ seriesName } ma identyfikator (${ seriesID }), który jest już używany przez inną serię.", s = "Element ${ dataPath } nie może wykonywać agregacji innej niż zliczenie na polu innym niż liczbowe.", r = "W elemencie ${ dataPath } brak właściwości o nazwie ${ missingProperty }.", m = "Element ${ dataPath } nie może być krótszy niż następująca liczba znaków: ${ limit }.", c = "Element ${ dataPath } nie może mieć mniej elementów niż ${ limit }.", y = "Element ${ dataPath } nie może mieć więcej elementów niż ${ limit }.", l = "Element ${ dataPath } musi zawierać co najmniej jeden znak inny niż biały znak.", d = "Element ${ dataPath } nie może zawierać ${ additionalProperty }.", w = "Element ${ dataPath } musi mieć wartość równą jednej z tych dozwolonych wartości: ${ allowedValues }.", u = "Element ${ dataPath } musi być zgodny z jednym z tych schematów: ${ schemaOptions }.", z = "Diagramy punktowe z symbolami proporcjonalnymi nie są obsługiwane. Zastosowano domyślną wielkość symbolu.", p = "Nie powiódł się odczyt danych wejściowych.", _ = "ł_The queryBins operation is not supported on this service______________________________ą.", h = "Oczekiwany typ serii z indeksem ${ seriesIndex } to '${ expectedType }', ale zamiast niego otrzymano '${ receivedType }'", $ = "lub", j = {
-  defaultError: e,
-  negativeValueInDataForLogTransformation: a,
-  negativeValueInDataForSqrtTransformation: n,
-  layerLoadFailure: t,
-  layerFieldsNotFound: i,
-  duplicateSeriesID: o,
-  nonNumericAggregation: s,
-  requiredProperty: r,
-  minLength: m,
-  minItems: c,
-  maxItems: y,
-  whiteSpacePattern: l,
-  additionalProperty: d,
-  enumValues: w,
-  anyOfValues: u,
-  bubbleChartValidateMsg: z,
-  queryError: p,
-  queryBinsNotSupported: _,
-  invalidSeriesType: h,
-  or: $
-};
-export {
-  d as additionalProperty,
-  u as anyOfValues,
-  z as bubbleChartValidateMsg,
-  j as default,
-  e as defaultError,
-  o as duplicateSeriesID,
-  w as enumValues,
-  h as invalidSeriesType,
-  i as layerFieldsNotFound,
-  t as layerLoadFailure,
-  y as maxItems,
-  c as minItems,
-  m as minLength,
-  a as negativeValueInDataForLogTransformation,
-  n as negativeValueInDataForSqrtTransformation,
-  s as nonNumericAggregation,
-  $ as or,
-  _ as queryBinsNotSupported,
-  p as queryError,
-  r as requiredProperty,
-  l as whiteSpacePattern
-};

package/dist/chunks/messages.pl2.js

@@ -1,22 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.16 */
-const a = { chart: "Diagram", barChart: "Diagram słupkowy grupowy", lineChart: "Diagram liniowy", pieChart: "Diagram kołowy", histogram: "Histogram", scatterplot: "ł_Scatterplot____________ą", boxPlot: "Diagram pudełkowy" }, t = { mean: "Średnia", median: "Mediana", sum: "Suma", discretePercentile: "Percentyl dyskretny", minimum: "Minimum", maximum: "Maksimum", variance: "Odchylenie", count: "Liczba", aggregation: "${ statistics } z ${ fieldName }", noAggregation: "Bez agregacji" }, e = "Wykres", i = "Zlicz serie", n = "Oś X", o = "Niedostępne", s = { start: "Dociągnij do pierwszego punktu danych", end: "Dociągnij do ostatniego punktu danych" }, r = {
-  chartType: a,
-  statistics: t,
-  defaultTitle: e,
-  countSeries: i,
-  xAxis: n,
-  notAvailable: o,
-  timeAggregationTypes: s
-};
-export {
-  a as chartType,
-  i as countSeries,
-  r as default,
-  e as defaultTitle,
-  o as notAvailable,
-  t as statistics,
-  s as timeAggregationTypes,
-  n as xAxis
-};

package/dist/chunks/messages.pl3.js

@@ -1,77 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.16 */
-const _ = "ł_Play_________ą", e = "ł_Stop_________ą", o = "ł_Legend_____________ą", r = "ł_Loading_______________ą", t = "ł_Home_________ą", s = "ł_Chart___________ą", a = "ł_Series_____________ą", n = "ł_Export_____________ą", i = "ł_Image___________ą", l = "ł_Data_________ą", d = "ł_Print___________ą", c = {
-  "Zoom Out": "ł_Zoom Out_________________ą",
-  Play: _,
-  Stop: e,
-  Legend: o,
-  "Press ENTER to toggle": "ł_Press ENTER to toggle______________________ą",
-  Loading: r,
-  Home: t,
-  Chart: s,
-  "Serial chart": "ł_Serial chart_____________ą",
-  "X/Y chart": "ł_X/Y chart___________________ą",
-  "Pie chart": "ł_Pie chart___________________ą",
-  "Gauge chart": "ł_Gauge chart____________ą",
-  "Radar chart": "ł_Radar chart____________ą",
-  "Sankey diagram": "ł_Sankey diagram_______________ą",
-  "Flow diagram": "ł_Flow diagram_____________ą",
-  "Chord diagram": "ł_Chord diagram______________ą",
-  "TreeMap chart": "ł_TreeMap chart______________ą",
-  "Sliced chart": "ł_Sliced chart_____________ą",
-  Series: a,
-  "Candlestick Series": "ł_Candlestick Series___________________ą",
-  "OHLC Series": "ł_OHLC Series____________ą",
-  "Column Series": "ł_Column Series______________ą",
-  "Line Series": "ł_Line Series____________ą",
-  "Pie Slice Series": "ł_Pie Slice Series_________________ą",
-  "Funnel Series": "ł_Funnel Series______________ą",
-  "Pyramid Series": "ł_Pyramid Series_______________ą",
-  "X/Y Series": "ł_X/Y Series_____________________ą",
-  Map: "ł_Map_______ą",
-  "Press ENTER to zoom in": "ł_Press ENTER to zoom in_______________________ą",
-  "Press ENTER to zoom out": "ł_Press ENTER to zoom out________________________ą",
-  "Use arrow keys to zoom in and out": "ł_Use arrow keys to zoom in and out__________________ą",
-  "Use plus and minus keys on your keyboard to zoom in and out": "ł_Use plus and minus keys on your keyboard to zoom in and out_______________________________ą",
-  Export: n,
-  Image: i,
-  Data: l,
-  Print: d,
-  "Press ENTER to open": "ł_Press ENTER to open____________________ą",
-  "Press ENTER to print.": "ł_Press ENTER to print______________________ą.",
-  "Press ENTER to export as %1.": "ł_Press ENTER to export as %1_____________________________ą.",
-  "(Press ESC to close this message)": "ł_(Press ESC to close this message)__________________ą",
-  "Image Export Complete": "ł_Image Export Complete______________________ą",
-  "Export operation took longer than expected. Something might have gone wrong.": "ł_Export operation took longer than expected. Something might have gone wrong_______________________________________ą.",
-  "Saved from": "ł_Saved from_____________________ą",
-  "Use TAB to select grip buttons or left and right arrows to change selection": "ł_Use TAB to select grip buttons or left and right arrows to change selection_______________________________________ą",
-  "Use left and right arrows to move selection": "ł_Use left and right arrows to move selection_______________________ą",
-  "Use left and right arrows to move left selection": "ł_Use left and right arrows to move left selection_________________________ą",
-  "Use left and right arrows to move right selection": "ł_Use left and right arrows to move right selection__________________________ą",
-  "Use TAB select grip buttons or up and down arrows to change selection": "ł_Use TAB select grip buttons or up and down arrows to change selection____________________________________ą",
-  "Use up and down arrows to move selection": "ł_Use up and down arrows to move selection_____________________ą",
-  "Use up and down arrows to move lower selection": "ł_Use up and down arrows to move lower selection________________________ą",
-  "Use up and down arrows to move upper selection": "ł_Use up and down arrows to move upper selection________________________ą",
-  "From %1 to %2": "ł_From %1 to %2______________ą",
-  "From %1": "ł_From %1_______________ą",
-  "To %1": "ł_To %1___________ą",
-  "No parser available for file: %1": "ł_No parser available for file: %1_________________ą",
-  "Error parsing file: %1": "ł_Error parsing file: %1_______________________ą",
-  "Unable to load file: %1": "ł_Unable to load file: %1________________________ą",
-  "Invalid date": "ł_Invalid date_____________ą"
-};
-export {
-  s as Chart,
-  l as Data,
-  n as Export,
-  t as Home,
-  i as Image,
-  o as Legend,
-  r as Loading,
-  _ as Play,
-  d as Print,
-  a as Series,
-  e as Stop,
-  c as default
-};

package/dist/chunks/messages.pl4.js

@@ -1,14 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.16 */
-const e = { percent: "Procent", values: "Wartości", standardizedValues: "Wartości standaryzowane", count: "Liczba", aggregationOfValues: "${ aggregation } wartości", aggregationOfFieldName: "${ aggregation } z ${ fieldName }" }, g = { aggrFieldsByCategory: "${ aggregationFields } według ${ category }", aggrTypeCategory: "${ aggregationType } według ${ category }", aggrTypeCategoryBySplitBy: "Agregacja ${ aggregationType } według ${ category } i ${ splitByField }", aggrTypeOfAggrFields: "${ aggregationType } z ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "Agregacja ${ aggregationType } pola ${ aggregationField } według ${ category } i ${ splitByField }", aggrTypeOfAggrFieldsByCategory: "Agregacja ${ aggregationType } pól ${ aggregationFields } według ${ category }", aggrFieldsByXAxisField: "${ aggregationFields } według ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType } według ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "Agregacja ${ aggregationType } według ${ xAxisField } i ${ splitByField }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "Agregacja ${ aggregationType } pola ${ aggregationField } według ${ xAxisField } i ${ splitByField }", aggrTypeOfAggrFieldsByXAxisField: "Agregacja ${ aggregationType } pól ${ aggregationFields } według ${ xAxisField }", distributionOfField: "Rozkład wartości pola ${ valueField }", distributionOfFields: "Rozkład wartości pola ${ valueFields }", distributionOfFieldsByCategory: "Rozkład ${ valueFields } według ${ category }", distributionOfFieldsByCategoryAndSplitBy: "Rozkład ${ valueFields } według ${ category } i ${ splitByField }", xAndY: "${ x } i ${ y }" }, a = { barChart: "Diagram słupkowy grupowy", lineChart: "Diagram liniowy", pieChart: "Diagram kołowy", histogram: "Histogram", scatterplot: "ł_Scatterplot____________ą" }, i = {
-  axisLabels: e,
-  titleLabels: g,
-  chartType: a
-};
-export {
-  e as axisLabels,
-  a as chartType,
-  i as default,
-  g as titleLabels
-};

package/dist/chunks/messages.pt-BR.js

@@ -1,48 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.16 */
-const e = "Ocorreu um erro ao carregar o gráfico.", a = "Não é possível aplicar transformação de log para valores negativos ou zero.", o = "Não é possível aplicar transformação de raiz quadrada para valores negativos.", r = "Ocorreu um erro ao carregar a camada. URL = ${ url }. D de item do portal = ${ portalItemId }.", t = "Os campos [${ fieldNames }] definidos na configuração não foram encontrados na camada.", s = "${ dataPath } deve ser único. A série denominada ${ seriesName } tem um id (${ seriesID }) que já é usado por outra série.", n = "${ dataPath } não deve realizar agregação sem contagem em campo não numérico.", d = "${ dataPath } está sem uma propriedade denominada ${ missingProperty }.", i = "${ dataPath } não deve ser menor que ${ limit } caracteres.", c = "${ dataPath } não deve ter menos que ${ limit } itens.", m = "${ dataPath } não deve ter mais de ${ limit } itens.", u = "${ dataPath } deve ter pelo menos um caractere diferente de espaço em branco.", l = "${ dataPath } não deve ter ${ additionalProperty }.", p = "${ dataPath } deve ser igual a um destes valores permitidos: ${ allowedValues }.", _ = "${ dataPath } deve corresponder ao esquema de um destes: ${ schemaOptions }.", $ = "Gráficos de dispersão com símbolos proporcionais não são suportados. O tamanho padrão do símbolo foi aplicado.", g = "Falha ao ler os dados de entrada.", v = "ã_The queryBins operation is not supported on this service______________________________Ç.", h = "O tipo de série esperado no índice${ seriesIndex } é '${ expectedType }' mas '${ receivedType }' foi recebido em seu lugar", f = "ou", P = {
-  defaultError: e,
-  negativeValueInDataForLogTransformation: a,
-  negativeValueInDataForSqrtTransformation: o,
-  layerLoadFailure: r,
-  layerFieldsNotFound: t,
-  duplicateSeriesID: s,
-  nonNumericAggregation: n,
-  requiredProperty: d,
-  minLength: i,
-  minItems: c,
-  maxItems: m,
-  whiteSpacePattern: u,
-  additionalProperty: l,
-  enumValues: p,
-  anyOfValues: _,
-  bubbleChartValidateMsg: $,
-  queryError: g,
-  queryBinsNotSupported: v,
-  invalidSeriesType: h,
-  or: f
-};
-export {
-  l as additionalProperty,
-  _ as anyOfValues,
-  $ as bubbleChartValidateMsg,
-  P as default,
-  e as defaultError,
-  s as duplicateSeriesID,
-  p as enumValues,
-  h as invalidSeriesType,
-  t as layerFieldsNotFound,
-  r as layerLoadFailure,
-  m as maxItems,
-  c as minItems,
-  i as minLength,
-  a as negativeValueInDataForLogTransformation,
-  o as negativeValueInDataForSqrtTransformation,
-  n as nonNumericAggregation,
-  f as or,
-  v as queryBinsNotSupported,
-  g as queryError,
-  d as requiredProperty,
-  u as whiteSpacePattern
-};

package/dist/chunks/messages.pt-BR2.js

@@ -1,22 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.16 */
-const a = { chart: "Gráfico", barChart: "Gráfico de barra", lineChart: "Gráfico de linhas", pieChart: "Gráfico de pizza", histogram: "Histograma", scatterplot: "ã_Scatterplot____________Ç", boxPlot: "Diagrama de caixa" }, t = { mean: "Médio", median: "Mediana", sum: "Soma", discretePercentile: "Percentil discreto", minimum: "Mínimo", maximum: "Máximo", variance: "Variância", count: "Contagem", aggregation: "${ statistics } de ${ fieldName }", noAggregation: "Sem agregação" }, e = "Gráfico", o = "Séries de contagem", i = "Eixo X", r = "Não Disponível", s = { start: "Ajustar ao primeiro ponto de dados", end: "Ajustar ao útimo ponto de dados" }, n = {
-  chartType: a,
-  statistics: t,
-  defaultTitle: e,
-  countSeries: o,
-  xAxis: i,
-  notAvailable: r,
-  timeAggregationTypes: s
-};
-export {
-  a as chartType,
-  o as countSeries,
-  n as default,
-  e as defaultTitle,
-  r as notAvailable,
-  t as statistics,
-  s as timeAggregationTypes,
-  i as xAxis
-};

package/dist/chunks/messages.pt-BR3.js

@@ -1,77 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.16 */
-const _ = "ã_Play_________Ç", e = "ã_Stop_________Ç", o = "ã_Legend_____________Ç", r = "ã_Loading_______________Ç", t = "ã_Home_________Ç", s = "ã_Chart___________Ç", a = "ã_Series_____________Ç", n = "ã_Export_____________Ç", i = "ã_Image___________Ç", l = "ã_Data_________Ç", d = "ã_Print___________Ç", c = {
-  "Zoom Out": "ã_Zoom Out_________________Ç",
-  Play: _,
-  Stop: e,
-  Legend: o,
-  "Press ENTER to toggle": "ã_Press ENTER to toggle______________________Ç",
-  Loading: r,
-  Home: t,
-  Chart: s,
-  "Serial chart": "ã_Serial chart_____________Ç",
-  "X/Y chart": "ã_X/Y chart___________________Ç",
-  "Pie chart": "ã_Pie chart___________________Ç",
-  "Gauge chart": "ã_Gauge chart____________Ç",
-  "Radar chart": "ã_Radar chart____________Ç",
-  "Sankey diagram": "ã_Sankey diagram_______________Ç",
-  "Flow diagram": "ã_Flow diagram_____________Ç",
-  "Chord diagram": "ã_Chord diagram______________Ç",
-  "TreeMap chart": "ã_TreeMap chart______________Ç",
-  "Sliced chart": "ã_Sliced chart_____________Ç",
-  Series: a,
-  "Candlestick Series": "ã_Candlestick Series___________________Ç",
-  "OHLC Series": "ã_OHLC Series____________Ç",
-  "Column Series": "ã_Column Series______________Ç",
-  "Line Series": "ã_Line Series____________Ç",
-  "Pie Slice Series": "ã_Pie Slice Series_________________Ç",
-  "Funnel Series": "ã_Funnel Series______________Ç",
-  "Pyramid Series": "ã_Pyramid Series_______________Ç",
-  "X/Y Series": "ã_X/Y Series_____________________Ç",
-  Map: "ã_Map_______Ç",
-  "Press ENTER to zoom in": "ã_Press ENTER to zoom in_______________________Ç",
-  "Press ENTER to zoom out": "ã_Press ENTER to zoom out________________________Ç",
-  "Use arrow keys to zoom in and out": "ã_Use arrow keys to zoom in and out__________________Ç",
-  "Use plus and minus keys on your keyboard to zoom in and out": "ã_Use plus and minus keys on your keyboard to zoom in and out_______________________________Ç",
-  Export: n,
-  Image: i,
-  Data: l,
-  Print: d,
-  "Press ENTER to open": "ã_Press ENTER to open____________________Ç",
-  "Press ENTER to print.": "ã_Press ENTER to print______________________Ç.",
-  "Press ENTER to export as %1.": "ã_Press ENTER to export as %1_____________________________Ç.",
-  "(Press ESC to close this message)": "ã_(Press ESC to close this message)__________________Ç",
-  "Image Export Complete": "ã_Image Export Complete______________________Ç",
-  "Export operation took longer than expected. Something might have gone wrong.": "ã_Export operation took longer than expected. Something might have gone wrong_______________________________________Ç.",
-  "Saved from": "ã_Saved from_____________________Ç",
-  "Use TAB to select grip buttons or left and right arrows to change selection": "ã_Use TAB to select grip buttons or left and right arrows to change selection_______________________________________Ç",
-  "Use left and right arrows to move selection": "ã_Use left and right arrows to move selection_______________________Ç",
-  "Use left and right arrows to move left selection": "ã_Use left and right arrows to move left selection_________________________Ç",
-  "Use left and right arrows to move right selection": "ã_Use left and right arrows to move right selection__________________________Ç",
-  "Use TAB select grip buttons or up and down arrows to change selection": "ã_Use TAB select grip buttons or up and down arrows to change selection____________________________________Ç",
-  "Use up and down arrows to move selection": "ã_Use up and down arrows to move selection_____________________Ç",
-  "Use up and down arrows to move lower selection": "ã_Use up and down arrows to move lower selection________________________Ç",
-  "Use up and down arrows to move upper selection": "ã_Use up and down arrows to move upper selection________________________Ç",
-  "From %1 to %2": "ã_From %1 to %2______________Ç",
-  "From %1": "ã_From %1_______________Ç",
-  "To %1": "ã_To %1___________Ç",
-  "No parser available for file: %1": "ã_No parser available for file: %1_________________Ç",
-  "Error parsing file: %1": "ã_Error parsing file: %1_______________________Ç",
-  "Unable to load file: %1": "ã_Unable to load file: %1________________________Ç",
-  "Invalid date": "ã_Invalid date_____________Ç"
-};
-export {
-  s as Chart,
-  l as Data,
-  n as Export,
-  t as Home,
-  i as Image,
-  o as Legend,
-  r as Loading,
-  _ as Play,
-  d as Print,
-  a as Series,
-  e as Stop,
-  c as default
-};

package/dist/chunks/messages.pt-BR4.js

@@ -1,14 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.16 */
-const e = { percent: "Porcentagem", values: "Valores", standardizedValues: "Valores padronizados", count: "Contagem", aggregationOfValues: "${ aggregation } de valores", aggregationOfFieldName: "${ aggregation } de ${ fieldName }" }, i = { aggrFieldsByCategory: "${ aggregationFields } por ${ category }", aggrTypeCategory: "${ aggregationType } por ${ category }", aggrTypeCategoryBySplitBy: "${ aggregationType } por ${ category } por ${ splitByField }", aggrTypeOfAggrFields: "${ aggregationType } de ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationType } de ${ aggregationField } por ${ category } por ${ splitByField }", aggrTypeOfAggrFieldsByCategory: "${ aggregationType } de ${ aggregationFields } por ${ category }", aggrFieldsByXAxisField: "${ aggregationFields } por ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType } por ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ aggregationType } por ${ xAxisField } por ${ splitByField }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationType } de ${ aggregationField } por ${ xAxisField } por ${ splitByField }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationType } de ${ aggregationFields } por ${ xAxisField }", distributionOfField: "Distribuição de ${ valueField }", distributionOfFields: "Distribuição de ${ valueFields }", distributionOfFieldsByCategory: "Distribuição de ${ valueFields } por ${ category }", distributionOfFieldsByCategoryAndSplitBy: "Distribuição de ${ valueFields } por ${ category } e ${ splitByField }", xAndY: "${ x } e ${ y }" }, g = { barChart: "Gráfico de barra", lineChart: "Gráfico de linhas", pieChart: "Gráfico de pizza", histogram: "Histograma", scatterplot: "ã_Scatterplot____________Ç" }, a = {
-  axisLabels: e,
-  titleLabels: i,
-  chartType: g
-};
-export {
-  e as axisLabels,
-  g as chartType,
-  a as default,
-  i as titleLabels
-};