@arcgis/charts-components 4.34.0-next.11 → 4.34.0-next.110

package/dist/chunks/messages.it.js

@@ -1,48 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.11 */
-const e = "Si è verificato un errore durante il caricamento del grafico.", a = "Impossibile applicare la trasformazione di log su valori negativi o zero.", t = "Impossibile applicare la trasformazione di radice quadrata su valori negativi.", i = "Si è verificato un errore durante il caricamento del layer. URL = ${ url }. ID elemento del portale = ${ portalItemId }.", o = "I campi [${ fieldNames }] definiti nel config non sono stati trovati nel layer.", n = "${ dataPath } deve essere univoco. La serie denominata ${ seriesName } ha un ID (${ seriesID }) che è già utilizzato da un'altra serie.", r = "${ dataPath } non può effettuare l'aggregazione senza conteggio su un campo non numerico.", s = "A ${ dataPath } manca una proprietà denominata ${ missingProperty }.", d = "${ dataPath } non deve essere più corto di ${ limit } caratteri.", l = "${ dataPath } non deve contenere meno di ${ limit } elementi.", c = "${ dataPath } non deve contenere più di ${ limit } elementi.", u = "${ dataPath } deve contenere almeno un carattere.", p = "${ dataPath } non deve contenere ${ additionalProperty }.", m = "${ dataPath } deve essere uguale a uno di questi valori consentiti: ${ allowedValues }.", _ = "${ dataPath } deve corrispondere allo schema di uno di questi‎: ${ schemaOptions }.", g = "I grafici a dispersione con simboli proporzionali non sono supportati. Sono state applicate delle dimensioni simbolo predefinite.", $ = "Impossibile leggere i dati di input.", v = "é_The queryBins operation is not supported on this service______________________________È.", h = "Il tipo di serie atteso all'indice ${ seriesIndex } è '${ expectedType }' ma invece è stato ricevuto '${ receivedType }'", f = "oppure", I = {
-  defaultError: e,
-  negativeValueInDataForLogTransformation: a,
-  negativeValueInDataForSqrtTransformation: t,
-  layerLoadFailure: i,
-  layerFieldsNotFound: o,
-  duplicateSeriesID: n,
-  nonNumericAggregation: r,
-  requiredProperty: s,
-  minLength: d,
-  minItems: l,
-  maxItems: c,
-  whiteSpacePattern: u,
-  additionalProperty: p,
-  enumValues: m,
-  anyOfValues: _,
-  bubbleChartValidateMsg: g,
-  queryError: $,
-  queryBinsNotSupported: v,
-  invalidSeriesType: h,
-  or: f
-};
-export {
-  p as additionalProperty,
-  _ as anyOfValues,
-  g as bubbleChartValidateMsg,
-  I as default,
-  e as defaultError,
-  n as duplicateSeriesID,
-  m as enumValues,
-  h as invalidSeriesType,
-  o as layerFieldsNotFound,
-  i as layerLoadFailure,
-  c as maxItems,
-  l as minItems,
-  d as minLength,
-  a as negativeValueInDataForLogTransformation,
-  t as negativeValueInDataForSqrtTransformation,
-  r as nonNumericAggregation,
-  f as or,
-  v as queryBinsNotSupported,
-  $ as queryError,
-  s as requiredProperty,
-  u as whiteSpacePattern
-};

package/dist/chunks/messages.it2.js

@@ -1,22 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.11 */
-const a = { chart: "Grafico", barChart: "Grafico a barre", lineChart: "Grafico a linee", pieChart: "Grafico a torta", histogram: "Istogramma", scatterplot: "é_Scatterplot____________È", boxPlot: "Box plot" }, t = { mean: "Media", median: "Mediana", sum: "Somma", discretePercentile: "Percentile discreto", minimum: "Minimo", maximum: "Massimo", variance: "Varianza", count: "Conteggio", aggregation: "${ statistics } di ${ fieldName }", noAggregation: "Nessuna aggregazione" }, i = "Grafico", e = "Serie Conteggio", o = "Asse X", n = "Non disponibile", s = { start: "Snap al primo punto dati", end: "Snap al punto dati finale" }, r = {
-  chartType: a,
-  statistics: t,
-  defaultTitle: i,
-  countSeries: e,
-  xAxis: o,
-  notAvailable: n,
-  timeAggregationTypes: s
-};
-export {
-  a as chartType,
-  e as countSeries,
-  r as default,
-  i as defaultTitle,
-  n as notAvailable,
-  t as statistics,
-  s as timeAggregationTypes,
-  o as xAxis
-};

package/dist/chunks/messages.it3.js

@@ -1,77 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.11 */
-const _ = "é_Play_________È", e = "é_Stop_________È", o = "é_Legend_____________È", r = "é_Loading_______________È", t = "é_Home_________È", s = "é_Chart___________È", a = "é_Series_____________È", n = "é_Export_____________È", i = "é_Image___________È", l = "é_Data_________È", d = "é_Print___________È", c = {
-  "Zoom Out": "é_Zoom Out_________________È",
-  Play: _,
-  Stop: e,
-  Legend: o,
-  "Press ENTER to toggle": "é_Press ENTER to toggle______________________È",
-  Loading: r,
-  Home: t,
-  Chart: s,
-  "Serial chart": "é_Serial chart_____________È",
-  "X/Y chart": "é_X/Y chart___________________È",
-  "Pie chart": "é_Pie chart___________________È",
-  "Gauge chart": "é_Gauge chart____________È",
-  "Radar chart": "é_Radar chart____________È",
-  "Sankey diagram": "é_Sankey diagram_______________È",
-  "Flow diagram": "é_Flow diagram_____________È",
-  "Chord diagram": "é_Chord diagram______________È",
-  "TreeMap chart": "é_TreeMap chart______________È",
-  "Sliced chart": "é_Sliced chart_____________È",
-  Series: a,
-  "Candlestick Series": "é_Candlestick Series___________________È",
-  "OHLC Series": "é_OHLC Series____________È",
-  "Column Series": "é_Column Series______________È",
-  "Line Series": "é_Line Series____________È",
-  "Pie Slice Series": "é_Pie Slice Series_________________È",
-  "Funnel Series": "é_Funnel Series______________È",
-  "Pyramid Series": "é_Pyramid Series_______________È",
-  "X/Y Series": "é_X/Y Series_____________________È",
-  Map: "é_Map_______È",
-  "Press ENTER to zoom in": "é_Press ENTER to zoom in_______________________È",
-  "Press ENTER to zoom out": "é_Press ENTER to zoom out________________________È",
-  "Use arrow keys to zoom in and out": "é_Use arrow keys to zoom in and out__________________È",
-  "Use plus and minus keys on your keyboard to zoom in and out": "é_Use plus and minus keys on your keyboard to zoom in and out_______________________________È",
-  Export: n,
-  Image: i,
-  Data: l,
-  Print: d,
-  "Press ENTER to open": "é_Press ENTER to open____________________È",
-  "Press ENTER to print.": "é_Press ENTER to print______________________È.",
-  "Press ENTER to export as %1.": "é_Press ENTER to export as %1_____________________________È.",
-  "(Press ESC to close this message)": "é_(Press ESC to close this message)__________________È",
-  "Image Export Complete": "é_Image Export Complete______________________È",
-  "Export operation took longer than expected. Something might have gone wrong.": "é_Export operation took longer than expected. Something might have gone wrong_______________________________________È.",
-  "Saved from": "é_Saved from_____________________È",
-  "Use TAB to select grip buttons or left and right arrows to change selection": "é_Use TAB to select grip buttons or left and right arrows to change selection_______________________________________È",
-  "Use left and right arrows to move selection": "é_Use left and right arrows to move selection_______________________È",
-  "Use left and right arrows to move left selection": "é_Use left and right arrows to move left selection_________________________È",
-  "Use left and right arrows to move right selection": "é_Use left and right arrows to move right selection__________________________È",
-  "Use TAB select grip buttons or up and down arrows to change selection": "é_Use TAB select grip buttons or up and down arrows to change selection____________________________________È",
-  "Use up and down arrows to move selection": "é_Use up and down arrows to move selection_____________________È",
-  "Use up and down arrows to move lower selection": "é_Use up and down arrows to move lower selection________________________È",
-  "Use up and down arrows to move upper selection": "é_Use up and down arrows to move upper selection________________________È",
-  "From %1 to %2": "é_From %1 to %2______________È",
-  "From %1": "é_From %1_______________È",
-  "To %1": "é_To %1___________È",
-  "No parser available for file: %1": "é_No parser available for file: %1_________________È",
-  "Error parsing file: %1": "é_Error parsing file: %1_______________________È",
-  "Unable to load file: %1": "é_Unable to load file: %1________________________È",
-  "Invalid date": "é_Invalid date_____________È"
-};
-export {
-  s as Chart,
-  l as Data,
-  n as Export,
-  t as Home,
-  i as Image,
-  o as Legend,
-  r as Loading,
-  _ as Play,
-  d as Print,
-  a as Series,
-  e as Stop,
-  c as default
-};

package/dist/chunks/messages.it4.js

@@ -1,14 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.11 */
-const e = { percent: "Percentuale", values: "Valori", standardizedValues: "Valori standardizzati", count: "Conteggio", aggregationOfValues: "${ aggregation } di valori", aggregationOfFieldName: "${ aggregation } di ${ fieldName }" }, i = { aggrFieldsByCategory: "${ aggregationFields } di ${ category }", aggrTypeCategory: "${ aggregationType } di ${ category }", aggrTypeCategoryBySplitBy: "${ aggregationType } per ${ category } per ${ splitByField }", aggrTypeOfAggrFields: "${ aggregationType } di ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationType } di ${ aggregationField } per ${ category } per ${ splitByField }", aggrTypeOfAggrFieldsByCategory: "${ aggregationType } di ${ aggregationFields } per ${ category }", aggrFieldsByXAxisField: "${ aggregationFields } di ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType } di ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ aggregationType } per ${ xAxisField } per ${ splitByField }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationType } di ${ aggregationField } per ${ xAxisField } per ${ splitByField }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationType } di ${ aggregationFields } per ${ xAxisField }", distributionOfField: "Distribuzione di ${ valueField }", distributionOfFields: "Distribuzione di ${ valueFields }", distributionOfFieldsByCategory: "Distribuzione di ${ valueFields } per ${ category }", distributionOfFieldsByCategoryAndSplitBy: "Distribuzione di ${ valueFields } per ${ category } e ${ splitByField }", xAndY: "${ x } e ${ y }" }, g = { barChart: "Grafico a barre", lineChart: "Grafico a linee", pieChart: "Grafico a torta", histogram: "Istogramma", scatterplot: "é_Scatterplot____________È" }, a = {
-  axisLabels: e,
-  titleLabels: i,
-  chartType: g
-};
-export {
-  e as axisLabels,
-  g as chartType,
-  a as default,
-  i as titleLabels
-};

package/dist/chunks/messages.ja.js

@@ -1,48 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.11 */
-const t = "チャートの読み込み中にエラーが発生しました。", a = "対数変換は負またはゼロの値に適用できません。", e = "平方根変換は負の値に適用できません。", o = "レイヤーの読み込み中にエラーが発生しました。 URL = ${ url } ポータル アイテム ID = ${ portalItemId }", s = "構成に定義されたフィールド [${ fieldNames }] がレイヤー内に見つかりませんでした。", n = "${ dataPath } は一意である必要があります。 ${ seriesName } という系列の ID (${ seriesID }) は、別の系列ですでに使用されています。", r = "${ dataPath } は、数値以外のフィールドで、個数以外の集約を実行することはできません。", i = "${ dataPath } に ${ missingProperty } というプロパティがありません。", _ = "${ dataPath } は ${ limit } 文字以上である必要があります。", d = "${ dataPath } のアイテムは ${ limit } 以上にする必要があります。", c = "${ dataPath } のアイテムは ${ limit } 以下にする必要があります。", l = "${ dataPath } には空白以外の文字が 1 つ以上含まれている必要があります。", $ = "${ dataPath } が ${ additionalProperty } を持つことはできません。", u = "${ dataPath } は、次のいずれかの許可された値と等しい必要があります: ${ allowedValues }", m = "${ dataPath } は、次のいずれかのスキーマと一致する必要があります: ${ schemaOptions }", p = "比例シンボルを使用した散布図はサポートされていません。 デフォルトのシンボル サイズが適用されています。", h = "入力データを読み取れません。", P = "須_The queryBins operation is not supported on this service______________________________鷗.", y = "インデックス ${ seriesIndex } で必要な系列タイプは ${ expectedType } ですが、代わりに ${ receivedType } が指定されました", I = "または", g = {
-  defaultError: t,
-  negativeValueInDataForLogTransformation: a,
-  negativeValueInDataForSqrtTransformation: e,
-  layerLoadFailure: o,
-  layerFieldsNotFound: s,
-  duplicateSeriesID: n,
-  nonNumericAggregation: r,
-  requiredProperty: i,
-  minLength: _,
-  minItems: d,
-  maxItems: c,
-  whiteSpacePattern: l,
-  additionalProperty: $,
-  enumValues: u,
-  anyOfValues: m,
-  bubbleChartValidateMsg: p,
-  queryError: h,
-  queryBinsNotSupported: P,
-  invalidSeriesType: y,
-  or: I
-};
-export {
-  $ as additionalProperty,
-  m as anyOfValues,
-  p as bubbleChartValidateMsg,
-  g as default,
-  t as defaultError,
-  n as duplicateSeriesID,
-  u as enumValues,
-  y as invalidSeriesType,
-  s as layerFieldsNotFound,
-  o as layerLoadFailure,
-  c as maxItems,
-  d as minItems,
-  _ as minLength,
-  a as negativeValueInDataForLogTransformation,
-  e as negativeValueInDataForSqrtTransformation,
-  r as nonNumericAggregation,
-  I as or,
-  P as queryBinsNotSupported,
-  h as queryError,
-  i as requiredProperty,
-  l as whiteSpacePattern
-};

package/dist/chunks/messages.ja2.js

@@ -1,22 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.11 */
-const t = { chart: "チャート", barChart: "バー チャート", lineChart: "ライン チャート", pieChart: "パイ チャート", histogram: "ヒストグラム", scatterplot: "須_Scatterplot____________鷗", boxPlot: "箱ひげ図" }, e = { mean: "平均", median: "中央値", sum: "合計", discretePercentile: "不連続パーセンタイル", minimum: "最小", maximum: "最大", variance: "分散", count: "個数", aggregation: "${ fieldName } の ${ statistics }", noAggregation: "集約なし" }, a = "チャート", s = "シリーズ数", i = "X 軸", n = "利用不可", o = { start: "最初のデータ ポイントにスナップ", end: "最後のデータ ポイントにスナップ" }, c = {
-  chartType: t,
-  statistics: e,
-  defaultTitle: a,
-  countSeries: s,
-  xAxis: i,
-  notAvailable: n,
-  timeAggregationTypes: o
-};
-export {
-  t as chartType,
-  s as countSeries,
-  c as default,
-  a as defaultTitle,
-  n as notAvailable,
-  e as statistics,
-  o as timeAggregationTypes,
-  i as xAxis
-};

package/dist/chunks/messages.ja3.js

@@ -1,77 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.11 */
-const _ = "須_Play_________鷗", e = "須_Stop_________鷗", o = "須_Legend_____________鷗", r = "須_Loading_______________鷗", t = "須_Home_________鷗", s = "須_Chart___________鷗", a = "須_Series_____________鷗", n = "須_Export_____________鷗", i = "須_Image___________鷗", l = "須_Data_________鷗", d = "須_Print___________鷗", c = {
-  "Zoom Out": "須_Zoom Out_________________鷗",
-  Play: _,
-  Stop: e,
-  Legend: o,
-  "Press ENTER to toggle": "須_Press ENTER to toggle______________________鷗",
-  Loading: r,
-  Home: t,
-  Chart: s,
-  "Serial chart": "須_Serial chart_____________鷗",
-  "X/Y chart": "須_X/Y chart___________________鷗",
-  "Pie chart": "須_Pie chart___________________鷗",
-  "Gauge chart": "須_Gauge chart____________鷗",
-  "Radar chart": "須_Radar chart____________鷗",
-  "Sankey diagram": "須_Sankey diagram_______________鷗",
-  "Flow diagram": "須_Flow diagram_____________鷗",
-  "Chord diagram": "須_Chord diagram______________鷗",
-  "TreeMap chart": "須_TreeMap chart______________鷗",
-  "Sliced chart": "須_Sliced chart_____________鷗",
-  Series: a,
-  "Candlestick Series": "須_Candlestick Series___________________鷗",
-  "OHLC Series": "須_OHLC Series____________鷗",
-  "Column Series": "須_Column Series______________鷗",
-  "Line Series": "須_Line Series____________鷗",
-  "Pie Slice Series": "須_Pie Slice Series_________________鷗",
-  "Funnel Series": "須_Funnel Series______________鷗",
-  "Pyramid Series": "須_Pyramid Series_______________鷗",
-  "X/Y Series": "須_X/Y Series_____________________鷗",
-  Map: "須_Map_______鷗",
-  "Press ENTER to zoom in": "須_Press ENTER to zoom in_______________________鷗",
-  "Press ENTER to zoom out": "須_Press ENTER to zoom out________________________鷗",
-  "Use arrow keys to zoom in and out": "須_Use arrow keys to zoom in and out__________________鷗",
-  "Use plus and minus keys on your keyboard to zoom in and out": "須_Use plus and minus keys on your keyboard to zoom in and out_______________________________鷗",
-  Export: n,
-  Image: i,
-  Data: l,
-  Print: d,
-  "Press ENTER to open": "須_Press ENTER to open____________________鷗",
-  "Press ENTER to print.": "須_Press ENTER to print______________________鷗.",
-  "Press ENTER to export as %1.": "須_Press ENTER to export as %1_____________________________鷗.",
-  "(Press ESC to close this message)": "須_(Press ESC to close this message)__________________鷗",
-  "Image Export Complete": "須_Image Export Complete______________________鷗",
-  "Export operation took longer than expected. Something might have gone wrong.": "須_Export operation took longer than expected. Something might have gone wrong_______________________________________鷗.",
-  "Saved from": "須_Saved from_____________________鷗",
-  "Use TAB to select grip buttons or left and right arrows to change selection": "須_Use TAB to select grip buttons or left and right arrows to change selection_______________________________________鷗",
-  "Use left and right arrows to move selection": "須_Use left and right arrows to move selection_______________________鷗",
-  "Use left and right arrows to move left selection": "須_Use left and right arrows to move left selection_________________________鷗",
-  "Use left and right arrows to move right selection": "須_Use left and right arrows to move right selection__________________________鷗",
-  "Use TAB select grip buttons or up and down arrows to change selection": "須_Use TAB select grip buttons or up and down arrows to change selection____________________________________鷗",
-  "Use up and down arrows to move selection": "須_Use up and down arrows to move selection_____________________鷗",
-  "Use up and down arrows to move lower selection": "須_Use up and down arrows to move lower selection________________________鷗",
-  "Use up and down arrows to move upper selection": "須_Use up and down arrows to move upper selection________________________鷗",
-  "From %1 to %2": "須_From %1 to %2______________鷗",
-  "From %1": "須_From %1_______________鷗",
-  "To %1": "須_To %1___________鷗",
-  "No parser available for file: %1": "須_No parser available for file: %1_________________鷗",
-  "Error parsing file: %1": "須_Error parsing file: %1_______________________鷗",
-  "Unable to load file: %1": "須_Unable to load file: %1________________________鷗",
-  "Invalid date": "須_Invalid date_____________鷗"
-};
-export {
-  s as Chart,
-  l as Data,
-  n as Export,
-  t as Home,
-  i as Image,
-  o as Legend,
-  r as Loading,
-  _ as Play,
-  d as Print,
-  a as Series,
-  e as Stop,
-  c as default
-};

package/dist/chunks/messages.ja4.js

@@ -1,14 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.11 */
-const e = { percent: "パーセント", values: "値", standardizedValues: "正規化された値", count: "個数", aggregationOfValues: "値の ${ aggregation }", aggregationOfFieldName: "${ fieldName } の ${ aggregation }" }, g = { aggrFieldsByCategory: "${ category } の ${ aggregationFields }", aggrTypeCategory: "${ category } の ${ aggregationType }", aggrTypeCategoryBySplitBy: "${ splitByField } 別の ${ category } の ${ aggregationType }", aggrTypeOfAggrFields: "${ aggregationType } / ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ splitByField } 別の ${ category } の ${ aggregationField } の ${ aggregationType }", aggrTypeOfAggrFieldsByCategory: "${ category } の ${ aggregationFields } の ${ aggregationType }", aggrFieldsByXAxisField: "${ xAxisField } の ${ aggregationFields }", aggrTypeXAxisField: "${ xAxisField } の ${ aggregationType }", aggrTypeXAxisFieldBySplitBy: "${ splitByField } 別の ${ xAxisField } の ${ aggregationType }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ splitByField } 別の ${ xAxisField } の ${ aggregationField } の ${ aggregationType }", aggrTypeOfAggrFieldsByXAxisField: "${ xAxisField } の ${ aggregationFields } の ${ aggregationType }", distributionOfField: "${ valueField } の分布", distributionOfFields: "${ valueFields } の分布", distributionOfFieldsByCategory: "${ category } による ${ valueFields } の分布", distributionOfFieldsByCategoryAndSplitBy: "${ category } と ${ splitByField } による ${ valueFields } の分布", xAndY: "${ x } および ${ y }" }, i = { barChart: "バー チャート", lineChart: "ライン チャート", pieChart: "パイ チャート", histogram: "ヒストグラム", scatterplot: "須_Scatterplot____________鷗" }, a = {
-  axisLabels: e,
-  titleLabels: g,
-  chartType: i
-};
-export {
-  e as axisLabels,
-  i as chartType,
-  a as default,
-  g as titleLabels
-};

package/dist/chunks/messages.ko.js

@@ -1,48 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.11 */
-const t = "차트를 불러오는 동안 오류가 발생했습니다.", a = "로그 변환을 음수 값 또는 0 값에 적용할 수 없습니다.", e = "제곱근 변환을 음수 값에 적용할 수 없습니다.", o = "레이어를 불러오는 동안 오류가 발생했습니다. URL = ${ url }. 포털 항목 ID = ${ portalItemId }.", s = "구성에 정의된 필드 [${ fieldNames }]를 레이어에서 찾을 수 없습니다.", n = "${ dataPath }은(는) 고유해야 합니다. ${ seriesName }(이)라는 계열에 다른 계열에서 이미 사용된 ID(${ seriesID })가 있습니다.", r = "${ dataPath }은(는) 숫자가 아닌 필드에서 불가산 집계를 수행할 수 없습니다.", i = "${ dataPath }에 ${ missingProperty } 등록정보가 누락되었습니다.", _ = "${ dataPath }은(는) ${ limit }자보다 짧으면 안 됩니다.", d = "${ dataPath }에는 ${ limit }개 이상의 항목이 있어야 합니다.", c = "${ dataPath }에는 ${ limit }개 이하의 항목이 있어야 합니다.", l = "${ dataPath }은(는) 공백 이외의 문자를 1개 이상 포함해야 합니다.", $ = "${ dataPath }에는 ${ additionalProperty }이(가) 없어야 합니다.", u = "${ dataPath }은(는) 허용된 값(${ allowedValues }) 중 하나와 같아야 합니다.", m = "${ dataPath }은(는) ${ schemaOptions } 중 하나의 스키마와 일치해야 합니다.", p = "비례 심볼이 있는 산점도는 지원되지 않습니다. 기본 심볼 크기가 적용되었습니다.", h = "입력 데이터를 읽지 못했습니다.", P = "한_The queryBins operation is not supported on this service______________________________빠.", y = "인덱스 ${ seriesIndex }에 예상되는 시리즈 유형은 '${ expectedType }'인데 '${ receivedType }'이(가) 대신 수신되었습니다.", I = "또는", g = {
-  defaultError: t,
-  negativeValueInDataForLogTransformation: a,
-  negativeValueInDataForSqrtTransformation: e,
-  layerLoadFailure: o,
-  layerFieldsNotFound: s,
-  duplicateSeriesID: n,
-  nonNumericAggregation: r,
-  requiredProperty: i,
-  minLength: _,
-  minItems: d,
-  maxItems: c,
-  whiteSpacePattern: l,
-  additionalProperty: $,
-  enumValues: u,
-  anyOfValues: m,
-  bubbleChartValidateMsg: p,
-  queryError: h,
-  queryBinsNotSupported: P,
-  invalidSeriesType: y,
-  or: I
-};
-export {
-  $ as additionalProperty,
-  m as anyOfValues,
-  p as bubbleChartValidateMsg,
-  g as default,
-  t as defaultError,
-  n as duplicateSeriesID,
-  u as enumValues,
-  y as invalidSeriesType,
-  s as layerFieldsNotFound,
-  o as layerLoadFailure,
-  c as maxItems,
-  d as minItems,
-  _ as minLength,
-  a as negativeValueInDataForLogTransformation,
-  e as negativeValueInDataForSqrtTransformation,
-  r as nonNumericAggregation,
-  I as or,
-  P as queryBinsNotSupported,
-  h as queryError,
-  i as requiredProperty,
-  l as whiteSpacePattern
-};

package/dist/chunks/messages.ko2.js

@@ -1,22 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.11 */
-const t = { chart: "차트", barChart: "막대형 차트", lineChart: "선형 차트", pieChart: "파이 차트", histogram: "히스토그램", scatterplot: "한_Scatterplot____________빠", boxPlot: "박스 플롯" }, e = { mean: "평균", median: "중앙값", sum: "합계", discretePercentile: "불연속 백분위수", minimum: "최소", maximum: "최대", variance: "변수", count: "개수", aggregation: "${ statistics }개 중 ${ fieldName }개", noAggregation: "집계 없음" }, a = "차트", s = "시리즈 개수", i = "X축", n = "사용할 수 없음", o = { start: "첫 번째 데이터 포인트로 스냅", end: "마지막 데이터 포인트로 스냅" }, c = {
-  chartType: t,
-  statistics: e,
-  defaultTitle: a,
-  countSeries: s,
-  xAxis: i,
-  notAvailable: n,
-  timeAggregationTypes: o
-};
-export {
-  t as chartType,
-  s as countSeries,
-  c as default,
-  a as defaultTitle,
-  n as notAvailable,
-  e as statistics,
-  o as timeAggregationTypes,
-  i as xAxis
-};

package/dist/chunks/messages.ko3.js

@@ -1,77 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.11 */
-const _ = "한_Play_________빠", e = "한_Stop_________빠", o = "한_Legend_____________빠", r = "한_Loading_______________빠", t = "한_Home_________빠", s = "한_Chart___________빠", a = "한_Series_____________빠", n = "한_Export_____________빠", i = "한_Image___________빠", l = "한_Data_________빠", d = "한_Print___________빠", c = {
-  "Zoom Out": "한_Zoom Out_________________빠",
-  Play: _,
-  Stop: e,
-  Legend: o,
-  "Press ENTER to toggle": "한_Press ENTER to toggle______________________빠",
-  Loading: r,
-  Home: t,
-  Chart: s,
-  "Serial chart": "한_Serial chart_____________빠",
-  "X/Y chart": "한_X/Y chart___________________빠",
-  "Pie chart": "한_Pie chart___________________빠",
-  "Gauge chart": "한_Gauge chart____________빠",
-  "Radar chart": "한_Radar chart____________빠",
-  "Sankey diagram": "한_Sankey diagram_______________빠",
-  "Flow diagram": "한_Flow diagram_____________빠",
-  "Chord diagram": "한_Chord diagram______________빠",
-  "TreeMap chart": "한_TreeMap chart______________빠",
-  "Sliced chart": "한_Sliced chart_____________빠",
-  Series: a,
-  "Candlestick Series": "한_Candlestick Series___________________빠",
-  "OHLC Series": "한_OHLC Series____________빠",
-  "Column Series": "한_Column Series______________빠",
-  "Line Series": "한_Line Series____________빠",
-  "Pie Slice Series": "한_Pie Slice Series_________________빠",
-  "Funnel Series": "한_Funnel Series______________빠",
-  "Pyramid Series": "한_Pyramid Series_______________빠",
-  "X/Y Series": "한_X/Y Series_____________________빠",
-  Map: "한_Map_______빠",
-  "Press ENTER to zoom in": "한_Press ENTER to zoom in_______________________빠",
-  "Press ENTER to zoom out": "한_Press ENTER to zoom out________________________빠",
-  "Use arrow keys to zoom in and out": "한_Use arrow keys to zoom in and out__________________빠",
-  "Use plus and minus keys on your keyboard to zoom in and out": "한_Use plus and minus keys on your keyboard to zoom in and out_______________________________빠",
-  Export: n,
-  Image: i,
-  Data: l,
-  Print: d,
-  "Press ENTER to open": "한_Press ENTER to open____________________빠",
-  "Press ENTER to print.": "한_Press ENTER to print______________________빠.",
-  "Press ENTER to export as %1.": "한_Press ENTER to export as %1_____________________________빠.",
-  "(Press ESC to close this message)": "한_(Press ESC to close this message)__________________빠",
-  "Image Export Complete": "한_Image Export Complete______________________빠",
-  "Export operation took longer than expected. Something might have gone wrong.": "한_Export operation took longer than expected. Something might have gone wrong_______________________________________빠.",
-  "Saved from": "한_Saved from_____________________빠",
-  "Use TAB to select grip buttons or left and right arrows to change selection": "한_Use TAB to select grip buttons or left and right arrows to change selection_______________________________________빠",
-  "Use left and right arrows to move selection": "한_Use left and right arrows to move selection_______________________빠",
-  "Use left and right arrows to move left selection": "한_Use left and right arrows to move left selection_________________________빠",
-  "Use left and right arrows to move right selection": "한_Use left and right arrows to move right selection__________________________빠",
-  "Use TAB select grip buttons or up and down arrows to change selection": "한_Use TAB select grip buttons or up and down arrows to change selection____________________________________빠",
-  "Use up and down arrows to move selection": "한_Use up and down arrows to move selection_____________________빠",
-  "Use up and down arrows to move lower selection": "한_Use up and down arrows to move lower selection________________________빠",
-  "Use up and down arrows to move upper selection": "한_Use up and down arrows to move upper selection________________________빠",
-  "From %1 to %2": "한_From %1 to %2______________빠",
-  "From %1": "한_From %1_______________빠",
-  "To %1": "한_To %1___________빠",
-  "No parser available for file: %1": "한_No parser available for file: %1_________________빠",
-  "Error parsing file: %1": "한_Error parsing file: %1_______________________빠",
-  "Unable to load file: %1": "한_Unable to load file: %1________________________빠",
-  "Invalid date": "한_Invalid date_____________빠"
-};
-export {
-  s as Chart,
-  l as Data,
-  n as Export,
-  t as Home,
-  i as Image,
-  o as Legend,
-  r as Loading,
-  _ as Play,
-  d as Print,
-  a as Series,
-  e as Stop,
-  c as default
-};

package/dist/chunks/messages.ko4.js

@@ -1,14 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.11 */
-const e = { percent: "백분율", values: "값", standardizedValues: "표준화된 값", count: "개수", aggregationOfValues: "값의 ${ aggregation }", aggregationOfFieldName: "${ aggregation }개 중 ${ fieldName }개" }, g = { aggrFieldsByCategory: "${ aggregationFields } 작성자 ${ category }", aggrTypeCategory: "${ aggregationType } 작성자 ${ category }", aggrTypeCategoryBySplitBy: "${ category }, ${ splitByField } 기준 ${ aggregationType }", aggrTypeOfAggrFields: "${ aggregationType } / ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationField }, ${ category }, ${ splitByField } 기준 ${ aggregationType }", aggrTypeOfAggrFieldsByCategory: "${ aggregationFields }, ${ category } 기준 ${ aggregationType }", aggrFieldsByXAxisField: "${ aggregationFields } 작성자 ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType } 작성자 ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ xAxisField }, ${ splitByField } 기준 ${ aggregationType }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationField }, ${ xAxisField }, ${ splitByField } 기준 ${ aggregationType }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationFields }, ${ xAxisField } 기준 ${ aggregationType }", distributionOfField: "${ valueField }의 분산", distributionOfFields: "${ valueFields }의 분포", distributionOfFieldsByCategory: "${ category } 기준 ${ valueFields }의 분포", distributionOfFieldsByCategoryAndSplitBy: "${ category } 및 ${ splitByField } 기준 ${ valueFields }의 분포", xAndY: "${ x } 및 ${ y }" }, i = { barChart: "막대형 차트", lineChart: "선형 차트", pieChart: "파이 차트", histogram: "히스토그램", scatterplot: "한_Scatterplot____________빠" }, a = {
-  axisLabels: e,
-  titleLabels: g,
-  chartType: i
-};
-export {
-  e as axisLabels,
-  i as chartType,
-  a as default,
-  g as titleLabels
-};

package/dist/chunks/messages.lt.js

@@ -1,48 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.11 */
-const a = "Įkeliant diagramą įvyko klaida.", i = "Negalima pritaikyti log. transformacijos neigiamoms arba nulinėms reikšmėms.", t = "Negalima pritaikyti kvadratinės šaknies transformacijos neigiamoms reikšmėms.", e = "Įkeliant sluoksnį įvyko klaida. URL = ${ url }. Portalo elemento ID = ${ portalItemId }.", s = "Sluoksnyje nepavyko rasti konfigūracijoje apibrėžtų laukų [${ fieldNames }].", n = "${ dataPath } turi būti unikalus. Serijos, kurios pavadinimas ${ seriesName }, ID (${ seriesID }) jau naudojamas kitai serijai.", o = "${ dataPath } negali atikti neskaičiavimo agregavimo ne skaičių lauke.", r = "${ dataPath } trūksta savybės pavadinimu ${ missingProperty }.", u = "${ dataPath } negali būti trumpesnis negu ${ limit } simb.", l = "${ dataPath } negali turėti mažiau negu ${ limit } elementų.", m = "${ dataPath } negali turėti daugiau negu ${ limit } elementų.", d = "${ dataPath } turi sudaryti bent vienas simbolis, kuris nėra tarpas.", c = "${ dataPath } negali sudaryti ${ additionalProperty }.", k = "${ dataPath } turi būti lygus vienai iš šių leidžiamų reikšmių: ${ allowedValues }.", p = "${ dataPath } turi sutapti su viena iš šių schemų: ${ schemaOptions }.", _ = "Sklaidos diagramos su proporciniais simboliais nėra palaikomos. Pritaikytas numatytasis simbolių dydis.", g = "Nepavyko nuskaityti įvesties duomenų.", y = "Į_The queryBins operation is not supported on this service______________________________š.", $ = "Numatytas serijos tipas indeksui ${ seriesIndex } yra ${ expectedType }, bet vietoj to gauta ${ receivedType }", v = "arba", h = {
-  defaultError: a,
-  negativeValueInDataForLogTransformation: i,
-  negativeValueInDataForSqrtTransformation: t,
-  layerLoadFailure: e,
-  layerFieldsNotFound: s,
-  duplicateSeriesID: n,
-  nonNumericAggregation: o,
-  requiredProperty: r,
-  minLength: u,
-  minItems: l,
-  maxItems: m,
-  whiteSpacePattern: d,
-  additionalProperty: c,
-  enumValues: k,
-  anyOfValues: p,
-  bubbleChartValidateMsg: _,
-  queryError: g,
-  queryBinsNotSupported: y,
-  invalidSeriesType: $,
-  or: v
-};
-export {
-  c as additionalProperty,
-  p as anyOfValues,
-  _ as bubbleChartValidateMsg,
-  h as default,
-  a as defaultError,
-  n as duplicateSeriesID,
-  k as enumValues,
-  $ as invalidSeriesType,
-  s as layerFieldsNotFound,
-  e as layerLoadFailure,
-  m as maxItems,
-  l as minItems,
-  u as minLength,
-  i as negativeValueInDataForLogTransformation,
-  t as negativeValueInDataForSqrtTransformation,
-  o as nonNumericAggregation,
-  v as or,
-  y as queryBinsNotSupported,
-  g as queryError,
-  r as requiredProperty,
-  d as whiteSpacePattern
-};

package/dist/chunks/messages.lt2.js

@@ -1,22 +0,0 @@
-/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
-See https://js.arcgis.com/4.34/esri/copyright.txt for details.
-v4.34.0-next.11 */
-const a = { chart: "Diagrama", barChart: "Stulpelinė diagrama", lineChart: "Linijinė diagrama", pieChart: "Skritulinė diagrama", histogram: "Histograma", scatterplot: "Į_Scatterplot____________š", boxPlot: "Stačiakampė diagrama" }, i = { mean: "Vidurkis", median: "Mediana", sum: "Suma", discretePercentile: "Diskretinis procentilis", minimum: "Minimumas", maximum: "Maksimumas", variance: "Nuokrypis", count: "Bendras skaičius", aggregation: "${ statistics } iš ${ fieldName }", noAggregation: "Be agregavimo" }, t = "Diagrama", e = "Skaičių serija", s = "X ašis", r = "Negalima", n = { start: "Pritraukti pirmą duomenų tašką", end: "Pritraukti paskutinį duomenų tašką" }, m = {
-  chartType: a,
-  statistics: i,
-  defaultTitle: t,
-  countSeries: e,
-  xAxis: s,
-  notAvailable: r,
-  timeAggregationTypes: n
-};
-export {
-  a as chartType,
-  e as countSeries,
-  m as default,
-  t as defaultTitle,
-  r as notAvailable,
-  i as statistics,
-  n as timeAggregationTypes,
-  s as xAxis
-};