@arcgis/charts-components 4.33.0-next.157 → 4.33.0-next.159

package/dist/chunks/messages.cs.js

@@ -1,48 +1,48 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.157 */
-const e = "Při načítání grafu došlo k chybě.", o = "Nelze uplatnit logaritmickou transformaci na záporné nebo nulové hodnoty.", t = "Nelze uplatnit transformaci odmocniny na záporné hodnoty.", a = "Při načítání vrstvy došlo k chybě. URL = ${ url }. ID položky portálu = ${ portalItemId }.", n = "Pole [${ fieldNames }] definovaná v konfiguraci nebyla nalezena ve vrstvě.", s = "${ dataPath } musí být jedinečné. Řada s názvem ${ seriesName } má ID (${ seriesID }), které již používá jiná řada.", r = "${ dataPath } nemůže provádět jiné seskupení než podle počtu na jiném než numerickém poli.", i = "V ${ dataPath } chybí vlastnost s názvem ${ missingProperty }.", d = "${ dataPath } nesmí být kratší než ${ limit } znaků.", l = "${ dataPath } nesmí obsahovat méně než ${ limit } položek.", m = "${ dataPath } nesmí obsahovat více než ${ limit } položek.", c = "${ dataPath } musí obsahovat alespoň jeden znak jiný než mezera.", p = "${ dataPath } nesmí obsahovat ${ additionalProperty }.", u = "${ dataPath } se musí rovnat jedné z těchto povolených hodnot: ${ allowedValues }.", h = "${ dataPath } se musí shodovat s jedním z těchto schémat: ${ schemaOptions }.", _ = "Rozptýlené bodové grafy s proporcionálními symboly nejsou podporovány. Byla použita výchozí velikost symbolu.", v = "Vstupní data se nepodařilo přečíst.", y = "Ř_The queryBins operation is not supported on this service______________________________ů.", $ = "Očekávaný typ řady s indexem ${ seriesIndex } je '${ expectedType }', ale obdrželi jsme '${ receivedType }'", b = "nebo", P = {
+v4.33.0-next.159 */
+const e = "Při načítání grafu došlo k chybě.", o = "Nelze uplatnit logaritmickou transformaci na záporné nebo nulové hodnoty.", a = "Nelze uplatnit transformaci odmocniny na záporné hodnoty.", t = "Při načítání vrstvy došlo k chybě. URL = ${ url }. ID položky portálu = ${ portalItemId }.", n = "Pole [${ fieldNames }] definovaná v konfiguraci nebyla nalezena ve vrstvě.", s = "${ dataPath } musí být jedinečné. Řada s názvem ${ seriesName } má ID (${ seriesID }), které již používá jiná řada.", r = "${ dataPath } nemůže provádět jiné seskupení než podle počtu na jiném než numerickém poli.", i = "V ${ dataPath } chybí vlastnost s názvem ${ missingProperty }.", l = "${ dataPath } nesmí být kratší než ${ limit } znaků.", d = "${ dataPath } nesmí obsahovat méně než ${ limit } položek.", m = "${ dataPath } nesmí obsahovat více než ${ limit } položek.", c = "${ dataPath } musí obsahovat alespoň jeden znak jiný než mezera.", p = "${ dataPath } nesmí obsahovat ${ additionalProperty }.", u = "${ dataPath } se musí rovnat jedné z těchto povolených hodnot: ${ allowedValues }.", v = "${ dataPath } se musí shodovat s jedním z těchto schémat: ${ schemaOptions }.", h = "Rozptýlené bodové grafy s proporcionálními symboly nejsou podporovány. Byla použita výchozí velikost symbolu.", y = "Vstupní data se nepodařilo přečíst.", $ = "Operace queryBins není v této službě podporována.", b = "Očekávaný typ řady s indexem ${ seriesIndex } je '${ expectedType }', ale obdrželi jsme '${ receivedType }'", P = "nebo", k = {
   defaultError: e,
   negativeValueInDataForLogTransformation: o,
-  negativeValueInDataForSqrtTransformation: t,
-  layerLoadFailure: a,
+  negativeValueInDataForSqrtTransformation: a,
+  layerLoadFailure: t,
   layerFieldsNotFound: n,
   duplicateSeriesID: s,
   nonNumericAggregation: r,
   requiredProperty: i,
-  minLength: d,
-  minItems: l,
+  minLength: l,
+  minItems: d,
   maxItems: m,
   whiteSpacePattern: c,
   additionalProperty: p,
   enumValues: u,
-  anyOfValues: h,
-  bubbleChartValidateMsg: _,
-  queryError: v,
-  queryBinsNotSupported: y,
-  invalidSeriesType: $,
-  or: b
+  anyOfValues: v,
+  bubbleChartValidateMsg: h,
+  queryError: y,
+  queryBinsNotSupported: $,
+  invalidSeriesType: b,
+  or: P
 };
 export {
   p as additionalProperty,
-  h as anyOfValues,
-  _ as bubbleChartValidateMsg,
-  P as default,
+  v as anyOfValues,
+  h as bubbleChartValidateMsg,
+  k as default,
   e as defaultError,
   s as duplicateSeriesID,
   u as enumValues,
-  $ as invalidSeriesType,
+  b as invalidSeriesType,
   n as layerFieldsNotFound,
-  a as layerLoadFailure,
+  t as layerLoadFailure,
   m as maxItems,
-  l as minItems,
-  d as minLength,
+  d as minItems,
+  l as minLength,
   o as negativeValueInDataForLogTransformation,
-  t as negativeValueInDataForSqrtTransformation,
+  a as negativeValueInDataForSqrtTransformation,
   r as nonNumericAggregation,
-  b as or,
-  y as queryBinsNotSupported,
-  v as queryError,
+  P as or,
+  $ as queryBinsNotSupported,
+  y as queryError,
   i as requiredProperty,
   c as whiteSpacePattern
 };

package/dist/chunks/messages.cs2.js

@@ -1,20 +1,20 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.157 */
-const t = { chart: "Graf", barChart: "Pruhový graf", lineChart: "Spojnicový graf", pieChart: "Výsečový graf", histogram: "Histogram", scatterplot: "Ř_Scatterplot____________ů", boxPlot: "Krabicový graf" }, a = { mean: "Průměr", median: "Medián", sum: "Suma", discretePercentile: "Diskrétní percentil", minimum: "Minimum", maximum: "Maximum", variance: "Rozptyl", count: "Počet", aggregation: "${ statistics } z ${ fieldName }", noAggregation: "Žádná agregace" }, e = "Graf", i = "Počet sérií", o = "Osa X", r = "Není k dispozici", s = { start: "Přichytit k prvnímu datovému bodu", end: "Přichytit k poslednímu datovému bodu" }, n = {
+v4.33.0-next.159 */
+const t = { chart: "Graf", barChart: "Pruhový graf", lineChart: "Spojnicový graf", pieChart: "Výsečový graf", histogram: "Histogram", scatterplot: "Bodový graf", boxPlot: "Krabicový graf" }, a = { mean: "Průměr", median: "Medián", sum: "Suma", discretePercentile: "Diskrétní percentil", minimum: "Minimum", maximum: "Maximum", variance: "Rozptyl", count: "Počet", aggregation: "${ statistics } z ${ fieldName }", noAggregation: "Žádná agregace" }, i = "Graf", e = "Počet sérií", o = "Osa X", r = "Není k dispozici", s = { start: "Přichytit k prvnímu datovému bodu", end: "Přichytit k poslednímu datovému bodu" }, n = {
   chartType: t,
   statistics: a,
-  defaultTitle: e,
-  countSeries: i,
+  defaultTitle: i,
+  countSeries: e,
   xAxis: o,
   notAvailable: r,
   timeAggregationTypes: s
 };
 export {
   t as chartType,
-  i as countSeries,
+  e as countSeries,
   n as default,
-  e as defaultTitle,
+  i as defaultTitle,
   r as notAvailable,
   a as statistics,
   s as timeAggregationTypes,

package/dist/chunks/messages.cs3.js

@@ -1,77 +1,14 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.157 */
-const _ = "Ř_Play_________ů", e = "Ř_Stop_________ů", o = "Ř_Legend_____________ů", r = "Ř_Loading_______________ů", t = "Ř_Home_________ů", s = "Ř_Chart___________ů", a = "Ř_Series_____________ů", n = "Ř_Export_____________ů", i = "Ř_Image___________ů", l = "Ř_Data_________ů", d = "Ř_Print___________ů", c = {
-  "Zoom Out": "Ř_Zoom Out_________________ů",
-  Play: _,
-  Stop: e,
-  Legend: o,
-  "Press ENTER to toggle": "Ř_Press ENTER to toggle______________________ů",
-  Loading: r,
-  Home: t,
-  Chart: s,
-  "Serial chart": "Ř_Serial chart_____________ů",
-  "X/Y chart": "Ř_X/Y chart___________________ů",
-  "Pie chart": "Ř_Pie chart___________________ů",
-  "Gauge chart": "Ř_Gauge chart____________ů",
-  "Radar chart": "Ř_Radar chart____________ů",
-  "Sankey diagram": "Ř_Sankey diagram_______________ů",
-  "Flow diagram": "Ř_Flow diagram_____________ů",
-  "Chord diagram": "Ř_Chord diagram______________ů",
-  "TreeMap chart": "Ř_TreeMap chart______________ů",
-  "Sliced chart": "Ř_Sliced chart_____________ů",
-  Series: a,
-  "Candlestick Series": "Ř_Candlestick Series___________________ů",
-  "OHLC Series": "Ř_OHLC Series____________ů",
-  "Column Series": "Ř_Column Series______________ů",
-  "Line Series": "Ř_Line Series____________ů",
-  "Pie Slice Series": "Ř_Pie Slice Series_________________ů",
-  "Funnel Series": "Ř_Funnel Series______________ů",
-  "Pyramid Series": "Ř_Pyramid Series_______________ů",
-  "X/Y Series": "Ř_X/Y Series_____________________ů",
-  Map: "Ř_Map_______ů",
-  "Press ENTER to zoom in": "Ř_Press ENTER to zoom in_______________________ů",
-  "Press ENTER to zoom out": "Ř_Press ENTER to zoom out________________________ů",
-  "Use arrow keys to zoom in and out": "Ř_Use arrow keys to zoom in and out__________________ů",
-  "Use plus and minus keys on your keyboard to zoom in and out": "Ř_Use plus and minus keys on your keyboard to zoom in and out_______________________________ů",
-  Export: n,
-  Image: i,
-  Data: l,
-  Print: d,
-  "Press ENTER to open": "Ř_Press ENTER to open____________________ů",
-  "Press ENTER to print.": "Ř_Press ENTER to print______________________ů.",
-  "Press ENTER to export as %1.": "Ř_Press ENTER to export as %1_____________________________ů.",
-  "(Press ESC to close this message)": "Ř_(Press ESC to close this message)__________________ů",
-  "Image Export Complete": "Ř_Image Export Complete______________________ů",
-  "Export operation took longer than expected. Something might have gone wrong.": "Ř_Export operation took longer than expected. Something might have gone wrong_______________________________________ů.",
-  "Saved from": "Ř_Saved from_____________________ů",
-  "Use TAB to select grip buttons or left and right arrows to change selection": "Ř_Use TAB to select grip buttons or left and right arrows to change selection_______________________________________ů",
-  "Use left and right arrows to move selection": "Ř_Use left and right arrows to move selection_______________________ů",
-  "Use left and right arrows to move left selection": "Ř_Use left and right arrows to move left selection_________________________ů",
-  "Use left and right arrows to move right selection": "Ř_Use left and right arrows to move right selection__________________________ů",
-  "Use TAB select grip buttons or up and down arrows to change selection": "Ř_Use TAB select grip buttons or up and down arrows to change selection____________________________________ů",
-  "Use up and down arrows to move selection": "Ř_Use up and down arrows to move selection_____________________ů",
-  "Use up and down arrows to move lower selection": "Ř_Use up and down arrows to move lower selection________________________ů",
-  "Use up and down arrows to move upper selection": "Ř_Use up and down arrows to move upper selection________________________ů",
-  "From %1 to %2": "Ř_From %1 to %2______________ů",
-  "From %1": "Ř_From %1_______________ů",
-  "To %1": "Ř_To %1___________ů",
-  "No parser available for file: %1": "Ř_No parser available for file: %1_________________ů",
-  "Error parsing file: %1": "Ř_Error parsing file: %1_______________________ů",
-  "Unable to load file: %1": "Ř_Unable to load file: %1________________________ů",
-  "Invalid date": "Ř_Invalid date_____________ů"
+v4.33.0-next.159 */
+const e = { percent: "Procenta", values: "Hodnoty", standardizedValues: "Standardizované hodnoty", count: "Počet", aggregationOfValues: "${ aggregation } hodnot", aggregationOfFieldName: "${ aggregation } z ${ fieldName }" }, g = { aggrFieldsByCategory: "${ aggregationFields } od ${ category }", aggrTypeCategory: "${ aggregationType } od ${ category }", aggrTypeCategoryBySplitBy: "${ aggregationType } od ${ category } od ${ splitByField }", aggrTypeOfAggrFields: "${ aggregationType } z ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationType } z ${ aggregationField } od ${ category } od ${ splitByField }", aggrTypeOfAggrFieldsByCategory: "${ aggregationType } z ${ aggregationFields } od ${ category }", aggrFieldsByXAxisField: "${ aggregationFields } od ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType } od ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ aggregationType } od ${ xAxisField } od ${ splitByField }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationType } z ${ aggregationField } od ${ xAxisField } od ${ splitByField }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationType } z ${ aggregationFields } od ${ xAxisField }", distributionOfField: "Distribuce ${ valueField }", distributionOfFields: "Distribuce ${ valueFields }", distributionOfFieldsByCategory: "Distribuce ${ valueFields } dle ${ category }", distributionOfFieldsByCategoryAndSplitBy: "Distribuce ${ valueFields } dle ${ category } a ${ splitByField }", xAndY: "${ x } a ${ y }" }, i = { barChart: "Pruhový graf", lineChart: "Spojnicový graf", pieChart: "Výsečový graf", histogram: "Histogram", scatterplot: "Bodový graf" }, a = {
+  axisLabels: e,
+  titleLabels: g,
+  chartType: i
 };
 export {
-  s as Chart,
-  l as Data,
-  n as Export,
-  t as Home,
-  i as Image,
-  o as Legend,
-  r as Loading,
-  _ as Play,
-  d as Print,
-  a as Series,
-  e as Stop,
-  c as default
+  e as axisLabels,
+  i as chartType,
+  a as default,
+  g as titleLabels
 };

package/dist/chunks/messages.cs4.js

@@ -1,14 +1,77 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.157 */
-const e = { percent: "Procenta", values: "Hodnoty", standardizedValues: "Standardizované hodnoty", count: "Počet", aggregationOfValues: "${ aggregation } hodnot", aggregationOfFieldName: "${ aggregation } z ${ fieldName }" }, g = { aggrFieldsByCategory: "${ aggregationFields } od ${ category }", aggrTypeCategory: "${ aggregationType } od ${ category }", aggrTypeCategoryBySplitBy: "${ aggregationType } od ${ category } od ${ splitByField }", aggrTypeOfAggrFields: "${ aggregationType } z ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationType } z ${ aggregationField } od ${ category } od ${ splitByField }", aggrTypeOfAggrFieldsByCategory: "${ aggregationType } z ${ aggregationFields } od ${ category }", aggrFieldsByXAxisField: "${ aggregationFields } od ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType } od ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ aggregationType } od ${ xAxisField } od ${ splitByField }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationType } z ${ aggregationField } od ${ xAxisField } od ${ splitByField }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationType } z ${ aggregationFields } od ${ xAxisField }", distributionOfField: "Distribuce ${ valueField }", distributionOfFields: "Distribuce ${ valueFields }", distributionOfFieldsByCategory: "Distribuce ${ valueFields } dle ${ category }", distributionOfFieldsByCategoryAndSplitBy: "Distribuce ${ valueFields } dle ${ category } a ${ splitByField }", xAndY: "${ x } a ${ y }" }, i = { barChart: "Pruhový graf", lineChart: "Spojnicový graf", pieChart: "Výsečový graf", histogram: "Histogram", scatterplot: "Ř_Scatterplot____________ů" }, a = {
-  axisLabels: e,
-  titleLabels: g,
-  chartType: i
+v4.33.0-next.159 */
+const o = "Přehrát", e = "Zastavit", a = "Legenda", t = "Načítání", r = "Domů", s = "Graf", n = "Řada", i = "Exportovat", v = "Obrázek", p = "Data", l = "Tisk", d = {
+  "Zoom Out": "Oddálit",
+  Play: o,
+  Stop: e,
+  Legend: a,
+  "Press ENTER to toggle": "Pro přepnutí stiskněte ENTER",
+  Loading: t,
+  Home: r,
+  Chart: s,
+  "Serial chart": "Řádkový graf",
+  "X/Y chart": "Graf X/Y",
+  "Pie chart": "Výsečový graf",
+  "Gauge chart": "Budíkový graf",
+  "Radar chart": "Radarový graf",
+  "Sankey diagram": "Sankeyův diagram",
+  "Flow diagram": "Vývojový diagram",
+  "Chord diagram": "Strunový diagram",
+  "TreeMap chart": "Stromová mapa",
+  "Sliced chart": "Výsečový graf",
+  Series: n,
+  "Candlestick Series": "Řada svícového grafu",
+  "OHLC Series": "Řada OHLC",
+  "Column Series": "Řada sloupců",
+  "Line Series": "Řada linií",
+  "Pie Slice Series": "Řada výsečového grafu",
+  "Funnel Series": "Řada trychtýřového grafu",
+  "Pyramid Series": "Řada pyramidového grafu",
+  "X/Y Series": "Řada X/Y",
+  Map: "Mapa",
+  "Press ENTER to zoom in": "Pro zvětšení stiskněte ENTER",
+  "Press ENTER to zoom out": "Pro zmenšení stiskněte ENTER",
+  "Use arrow keys to zoom in and out": "Pomocí kláves se šipkami můžete zvětšovat a zmenšovat",
+  "Use plus and minus keys on your keyboard to zoom in and out": "Pomocí kláves plus a mínus na klávesnici můžete zvětšovat a zmenšovat.",
+  Export: i,
+  Image: v,
+  Data: p,
+  Print: l,
+  "Press ENTER to open": "Pro otevření stiskněte ENTER",
+  "Press ENTER to print.": "Pro tisk stiskněte ENTER",
+  "Press ENTER to export as %1.": "Stisknutím ENTER se provede export jako %1.",
+  "(Press ESC to close this message)": "(Tuto zprávu zavřete stisknutím ESC)",
+  "Image Export Complete": "Export snímku dokončen",
+  "Export operation took longer than expected. Something might have gone wrong.": "Export trval déle, než se očekávalo. Něco se mohlo pokazit.",
+  "Saved from": "Uloženo z",
+  "Use TAB to select grip buttons or left and right arrows to change selection": "Pomocí TAB můžete vybírat úchytná tlačítka nebo pomocí šipek vlevo a vpravo měnit výběr.",
+  "Use left and right arrows to move selection": "Pro přesun výběru použijte šipky vlevo a vpravo",
+  "Use left and right arrows to move left selection": "Pro přesun levého výběru použijte šipky vlevo a vpravo",
+  "Use left and right arrows to move right selection": "Pro přesun pravého výběru použijte šipky vlevo a vpravo",
+  "Use TAB select grip buttons or up and down arrows to change selection": "Pomocí TAB můžete vybírat úchytná tlačítka nebo pomocí šipek nahoru a dolů měnit výběr.",
+  "Use up and down arrows to move selection": "Pro přesun výběru použijte šipky nahoru a dolů",
+  "Use up and down arrows to move lower selection": "Pro přesun dolního výběru použijte šipky nahoru a dolů",
+  "Use up and down arrows to move upper selection": "Pro přesun horního výběru použijte šipky nahoru a dolů",
+  "From %1 to %2": "Od %1 do %2",
+  "From %1": "Od %1",
+  "To %1": "Do %1",
+  "No parser available for file: %1": "Není k dispozici žádný analyzátor pro soubor: %1",
+  "Error parsing file: %1": "Chyba při analýze souboru: %1",
+  "Unable to load file: %1": "Nelze načíst soubor: %1",
+  "Invalid date": "Neplatné datum"
 };
 export {
-  e as axisLabels,
-  i as chartType,
-  a as default,
-  g as titleLabels
+  s as Chart,
+  p as Data,
+  i as Export,
+  r as Home,
+  v as Image,
+  a as Legend,
+  t as Loading,
+  o as Play,
+  l as Print,
+  n as Series,
+  e as Stop,
+  d as default
 };

package/dist/chunks/messages.da.js

@@ -1,7 +1,7 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.157 */
-const e = "Der opstod en fejl under indlæsning af diagrammet.", t = "Kan ikke anvende log-transformation på negative værdier eller nulværdier.", a = "Kan ikke anvende kvadratrod-transformation på negative værdier.", n = "Der opstod en fejl under indlæsning af laget. URL = ${ url }. Portalelement-id = ${ portalItemId }.", r = "De felter [${ fieldNames }], der er defineret i konfigurationen, blev ikke fundet i laget.", i = "${ dataPath } skal være entydig. Serien med navnet ${ seriesName } har et id (${ seriesID }), der allerede bruges i en anden serie.", s = "${ dataPath } kan ikke udføre ikke-antal-aggregering på ikke-numeriske felter.", d = "${ dataPath } mangler en egenskab med navnet ${ missingProperty }.", o = "${ dataPath } skal ikke være kortere end ${ limit } tegn.", l = "${ dataPath } må ikke have færre end ${ limit } elementer.", m = "${ dataPath } må ikke have flere end ${ limit } elementer.", k = "${ dataPath } skal have mindst et tegn, der ikke er et mellemrumstegn.", g = "${ dataPath } må ikke have ${ additionalProperty }.", u = "${ dataPath } skal være lig med en af disse tilladte værdier: ${ allowedValues }.", _ = "${ dataPath } skal matche skemaet fra en af disse: ${ schemaOptions }.", c = "Punktdiagrammer med proportionale symboler understøttes ikke. Der er blevet anvendt standardstørrelse på symboler.", v = "Kunne ikke læse inputdata.", p = "ø_The queryBins operation is not supported on this service______________________________å.", f = "Den forventede serietype ved indekset ${ seriesIndex } er '${ expectedType }', men '${ receivedType }' blev modtaget i stedet for", $ = "eller", h = {
+v4.33.0-next.159 */
+const e = "Der opstod en fejl under indlæsning af diagrammet.", t = "Kan ikke anvende log-transformation på negative værdier eller nulværdier.", a = "Kan ikke anvende kvadratrod-transformation på negative værdier.", n = "Der opstod en fejl under indlæsning af laget. URL = ${ url }. Portalelement-id = ${ portalItemId }.", r = "De felter [${ fieldNames }], der er defineret i konfigurationen, blev ikke fundet i laget.", i = "${ dataPath } skal være entydig. Serien med navnet ${ seriesName } har et id (${ seriesID }), der allerede bruges i en anden serie.", s = "${ dataPath } kan ikke udføre ikke-antal-aggregering på ikke-numeriske felter.", d = "${ dataPath } mangler en egenskab med navnet ${ missingProperty }.", o = "${ dataPath } skal ikke være kortere end ${ limit } tegn.", l = "${ dataPath } må ikke have færre end ${ limit } elementer.", m = "${ dataPath } må ikke have flere end ${ limit } elementer.", k = "${ dataPath } skal have mindst et tegn, der ikke er et mellemrumstegn.", g = "${ dataPath } må ikke have ${ additionalProperty }.", u = "${ dataPath } skal være lig med en af disse tilladte værdier: ${ allowedValues }.", c = "${ dataPath } skal matche skemaet fra en af disse: ${ schemaOptions }.", v = "Punktdiagrammer med proportionale symboler understøttes ikke. Der er blevet anvendt standardstørrelse på symboler.", f = "Kunne ikke læse inputdata.", p = "queryBins-handlingen understøttes ikke i denne tjeneste.", $ = "Den forventede serietype ved indekset ${ seriesIndex } er '${ expectedType }', men '${ receivedType }' blev modtaget i stedet for", h = "eller", y = {
   defaultError: e,
   negativeValueInDataForLogTransformation: t,
   negativeValueInDataForSqrtTransformation: a,
@@ -16,22 +16,22 @@ const e = "Der opstod en fejl under indlæsning af diagrammet.", t = "Kan ikke a
   whiteSpacePattern: k,
   additionalProperty: g,
   enumValues: u,
-  anyOfValues: _,
-  bubbleChartValidateMsg: c,
-  queryError: v,
+  anyOfValues: c,
+  bubbleChartValidateMsg: v,
+  queryError: f,
   queryBinsNotSupported: p,
-  invalidSeriesType: f,
-  or: $
+  invalidSeriesType: $,
+  or: h
 };
 export {
   g as additionalProperty,
-  _ as anyOfValues,
-  c as bubbleChartValidateMsg,
-  h as default,
+  c as anyOfValues,
+  v as bubbleChartValidateMsg,
+  y as default,
   e as defaultError,
   i as duplicateSeriesID,
   u as enumValues,
-  f as invalidSeriesType,
+  $ as invalidSeriesType,
   r as layerFieldsNotFound,
   n as layerLoadFailure,
   m as maxItems,
@@ -40,9 +40,9 @@ export {
   t as negativeValueInDataForLogTransformation,
   a as negativeValueInDataForSqrtTransformation,
   s as nonNumericAggregation,
-  $ as or,
+  h as or,
   p as queryBinsNotSupported,
-  v as queryError,
+  f as queryError,
   d as requiredProperty,
   k as whiteSpacePattern
 };

package/dist/chunks/messages.da2.js

@@ -1,9 +1,9 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.157 */
-const t = { chart: "Diagram", barChart: "Søjlediagram", lineChart: "Linjediagram", pieChart: "Cirkeldiagram", histogram: "Histogram", scatterplot: "ø_Scatterplot____________å", boxPlot: "Kassediagram" }, a = { mean: "Middel", median: "Median", sum: "Sum", discretePercentile: "Særskilt percentil", minimum: "Minimum", maximum: "Maksimum", variance: "Varians", count: "Tælling", aggregation: "${ statistics } for ${ fieldName }", noAggregation: "Ingen aggregering" }, e = "Diagram", i = "Tællerække", s = "X-akse", r = "Ikke tilgængelig", n = { start: "Fastgør til det første datapunkt", end: "Fastgør til det sidste datapunkt" }, g = {
-  chartType: t,
-  statistics: a,
+v4.33.0-next.159 */
+const a = { chart: "Diagram", barChart: "Søjlediagram", lineChart: "Linjediagram", pieChart: "Cirkeldiagram", histogram: "Histogram", scatterplot: "Punktdiagram", boxPlot: "Kassediagram" }, t = { mean: "Middel", median: "Median", sum: "Sum", discretePercentile: "Særskilt percentil", minimum: "Minimum", maximum: "Maksimum", variance: "Varians", count: "Tælling", aggregation: "${ statistics } for ${ fieldName }", noAggregation: "Ingen aggregering" }, e = "Diagram", i = "Tællerække", s = "X-akse", r = "Ikke tilgængelig", n = { start: "Fastgør til det første datapunkt", end: "Fastgør til det sidste datapunkt" }, g = {
+  chartType: a,
+  statistics: t,
   defaultTitle: e,
   countSeries: i,
   xAxis: s,
@@ -11,12 +11,12 @@ const t = { chart: "Diagram", barChart: "Søjlediagram", lineChart: "Linjediagra
   timeAggregationTypes: n
 };
 export {
-  t as chartType,
+  a as chartType,
   i as countSeries,
   g as default,
   e as defaultTitle,
   r as notAvailable,
-  a as statistics,
+  t as statistics,
   n as timeAggregationTypes,
   s as xAxis
 };

package/dist/chunks/messages.da3.js

@@ -1,7 +1,7 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.157 */
-const e = { percent: "Procent", values: "Værdier", standardizedValues: "Standardiserede værdier", count: "Tælling", aggregationOfValues: "${ aggregation } af værdier", aggregationOfFieldName: "${ aggregation } for ${ fieldName }" }, a = { aggrFieldsByCategory: "${ aggregationFields } af ${ category }", aggrTypeCategory: "${ aggregationType } af ${ category }", aggrTypeCategoryBySplitBy: "${ aggregationType } af ${ category } af ${ splitByField }", aggrTypeOfAggrFields: "${ aggregationType } for ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationType } fra ${ aggregationField } af ${ category } af ${ splitByField }", aggrTypeOfAggrFieldsByCategory: "${ aggregationType } fra ${ aggregationFields } af ${ category }", aggrFieldsByXAxisField: "${ aggregationFields } af ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType } af ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ aggregationType } af ${ xAxisField } af ${ splitByField }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationType } fra ${ aggregationField } af ${ xAxisField } af ${ splitByField }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationType } fra ${ aggregationFields } af ${ xAxisField }", distributionOfField: "Distribution af ${ valueField }", distributionOfFields: "Distribution af ${ valueFields }", distributionOfFieldsByCategory: "Distribution af ${ valueFields } efter ${ category }", distributionOfFieldsByCategoryAndSplitBy: "Distribution af ${ valueFields } efter ${ category } og ${ splitByField }", xAndY: "${ x } og ${ y }" }, i = { barChart: "Søjlediagram", lineChart: "Linjediagram", pieChart: "Cirkeldiagram", histogram: "Histogram", scatterplot: "ø_Scatterplot____________å" }, g = {
+v4.33.0-next.159 */
+const e = { percent: "Procent", values: "Værdier", standardizedValues: "Standardiserede værdier", count: "Tælling", aggregationOfValues: "${ aggregation } af værdier", aggregationOfFieldName: "${ aggregation } for ${ fieldName }" }, a = { aggrFieldsByCategory: "${ aggregationFields } af ${ category }", aggrTypeCategory: "${ aggregationType } af ${ category }", aggrTypeCategoryBySplitBy: "${ aggregationType } af ${ category } af ${ splitByField }", aggrTypeOfAggrFields: "${ aggregationType } for ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationType } fra ${ aggregationField } af ${ category } af ${ splitByField }", aggrTypeOfAggrFieldsByCategory: "${ aggregationType } fra ${ aggregationFields } af ${ category }", aggrFieldsByXAxisField: "${ aggregationFields } af ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType } af ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ aggregationType } af ${ xAxisField } af ${ splitByField }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationType } fra ${ aggregationField } af ${ xAxisField } af ${ splitByField }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationType } fra ${ aggregationFields } af ${ xAxisField }", distributionOfField: "Distribution af ${ valueField }", distributionOfFields: "Distribution af ${ valueFields }", distributionOfFieldsByCategory: "Distribution af ${ valueFields } efter ${ category }", distributionOfFieldsByCategoryAndSplitBy: "Distribution af ${ valueFields } efter ${ category } og ${ splitByField }", xAndY: "${ x } og ${ y }" }, i = { barChart: "Søjlediagram", lineChart: "Linjediagram", pieChart: "Cirkeldiagram", histogram: "Histogram", scatterplot: "Punktdiagram" }, g = {
   axisLabels: e,
   titleLabels: a,
   chartType: i

package/dist/chunks/messages.de.js

@@ -1,7 +1,7 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.157 */
-const e = "Beim Laden des Diagramms ist ein Fehler aufgetreten.", n = "Eine logarithmische Transformation kann nicht auf negative oder Nullwerte angewendet werden.", t = "Eine Quadratwurzeltransformation kann nicht auf negative Werte angewendet werden.", a = "Beim Laden des Layers ist ein Fehler aufgetreten. URL = ${ url } Portal-Element-ID = ${ portalItemId }.", i = "Die in der Konfiguration definierten Felder [${ fieldNames }] wurden im Layer nicht gefunden.", r = "${ dataPath } muss eindeutig sein. Die Reihe mit dem Namen ${ seriesName } hat eine ID (${ seriesID }), die schon von einer anderen Reihe verwendet wird.", s = "${ dataPath } kann keine Aggregation, die nicht anzahlbasiert ist, für nicht numerische Felder durchführen.", d = "${ dataPath } fehlt eine Eigenschaft mit dem Namen ${ missingProperty }.", o = "${ dataPath } darf nicht kürzer als ${ limit } Zeichen sein.", l = "${ dataPath } darf nicht weniger als ${ limit } Elemente enthalten.", m = "${ dataPath } darf nicht mehr als ${ limit } Elemente enthalten.", h = "${ dataPath } muss mindestens ein Zeichen enthalten, bei dem es sich nicht um ein Leerstellenzeichen handelt.", c = "${ dataPath } darf nicht ${ additionalProperty } aufweisen.", u = "${ dataPath } muss einem der folgenden zulässigen Werte entsprechen: ${ allowedValues }.", g = "${ dataPath } muss mit einem der folgenden Schemas übereinstimmen: ${ schemaOptions }.", _ = "Scatterplots mit proportionalen Symbolen werden nicht unterstützt. Die standardmäßige Symbolgröße wurde angewendet.", f = "Fehler beim Lesen der Eingabedaten.", $ = "ä_The queryBins operation is not supported on this service______________________________Ü.", p = 'Der erwartete Serientyp bei Index ${ seriesIndex } lautet "${ expectedType }", stattdessen wurde jedoch "${ receivedType }" empfangen.', w = "oder", y = {
+v4.33.0-next.159 */
+const e = "Beim Laden des Diagramms ist ein Fehler aufgetreten.", n = "Eine logarithmische Transformation kann nicht auf negative oder Nullwerte angewendet werden.", t = "Eine Quadratwurzeltransformation kann nicht auf negative Werte angewendet werden.", a = "Beim Laden des Layers ist ein Fehler aufgetreten. URL = ${ url } Portal-Element-ID = ${ portalItemId }.", i = "Die in der Konfiguration definierten Felder [${ fieldNames }] wurden im Layer nicht gefunden.", r = "${ dataPath } muss eindeutig sein. Die Reihe mit dem Namen ${ seriesName } hat eine ID (${ seriesID }), die schon von einer anderen Reihe verwendet wird.", s = "${ dataPath } kann keine Aggregation, die nicht anzahlbasiert ist, für nicht numerische Felder durchführen.", d = "${ dataPath } fehlt eine Eigenschaft mit dem Namen ${ missingProperty }.", o = "${ dataPath } darf nicht kürzer als ${ limit } Zeichen sein.", l = "${ dataPath } darf nicht weniger als ${ limit } Elemente enthalten.", m = "${ dataPath } darf nicht mehr als ${ limit } Elemente enthalten.", c = "${ dataPath } muss mindestens ein Zeichen enthalten, bei dem es sich nicht um ein Leerstellenzeichen handelt.", h = "${ dataPath } darf nicht ${ additionalProperty } aufweisen.", u = "${ dataPath } muss einem der folgenden zulässigen Werte entsprechen: ${ allowedValues }.", g = "${ dataPath } muss mit einem der folgenden Schemas übereinstimmen: ${ schemaOptions }.", f = "Scatterplots mit proportionalen Symbolen werden nicht unterstützt. Die standardmäßige Symbolgröße wurde angewendet.", $ = "Fehler beim Lesen der Eingabedaten.", p = "Der queryBins-Vorgang wird für diesen Service nicht unterstützt.", w = 'Der erwartete Serientyp bei Index ${ seriesIndex } lautet "${ expectedType }", stattdessen wurde jedoch "${ receivedType }" empfangen.', y = "oder", P = {
   defaultError: e,
   negativeValueInDataForLogTransformation: n,
   negativeValueInDataForSqrtTransformation: t,
@@ -13,25 +13,25 @@ const e = "Beim Laden des Diagramms ist ein Fehler aufgetreten.", n = "Eine loga
   minLength: o,
   minItems: l,
   maxItems: m,
-  whiteSpacePattern: h,
-  additionalProperty: c,
+  whiteSpacePattern: c,
+  additionalProperty: h,
   enumValues: u,
   anyOfValues: g,
-  bubbleChartValidateMsg: _,
-  queryError: f,
-  queryBinsNotSupported: $,
-  invalidSeriesType: p,
-  or: w
+  bubbleChartValidateMsg: f,
+  queryError: $,
+  queryBinsNotSupported: p,
+  invalidSeriesType: w,
+  or: y
 };
 export {
-  c as additionalProperty,
+  h as additionalProperty,
   g as anyOfValues,
-  _ as bubbleChartValidateMsg,
-  y as default,
+  f as bubbleChartValidateMsg,
+  P as default,
   e as defaultError,
   r as duplicateSeriesID,
   u as enumValues,
-  p as invalidSeriesType,
+  w as invalidSeriesType,
   i as layerFieldsNotFound,
   a as layerLoadFailure,
   m as maxItems,
@@ -40,9 +40,9 @@ export {
   n as negativeValueInDataForLogTransformation,
   t as negativeValueInDataForSqrtTransformation,
   s as nonNumericAggregation,
-  w as or,
-  $ as queryBinsNotSupported,
-  f as queryError,
+  y as or,
+  p as queryBinsNotSupported,
+  $ as queryError,
   d as requiredProperty,
-  h as whiteSpacePattern
+  c as whiteSpacePattern
 };

package/dist/chunks/messages.de2.js

@@ -1,7 +1,7 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.157 */
-const e = { chart: "Diagramm", barChart: "Balkendiagramm", lineChart: "Liniendiagramm", pieChart: "Kreisdiagramm", histogram: "Histogramm", scatterplot: "ä_Scatterplot____________Ü", boxPlot: "Boxplot" }, t = { mean: "Mittelwert", median: "Medianwert", sum: "Summe", discretePercentile: "Diskontinuierliches Perzentil", minimum: "Minimum", maximum: "Maximum", variance: "Varianz", count: "Anzahl", aggregation: "${ statistics } von ${ fieldName }", noAggregation: "Keine Aggregation" }, a = "Diagramm", i = "Mengenserie", n = "X-Achse", r = "Nicht verfügbar", m = { start: "Am ersten Datenpunkt fangen", end: "Am letzten Datenpunkt fangen" }, s = {
+v4.33.0-next.159 */
+const e = { chart: "Diagramm", barChart: "Balkendiagramm", lineChart: "Liniendiagramm", pieChart: "Kreisdiagramm", histogram: "Histogramm", scatterplot: "Scatterplot", boxPlot: "Boxplot" }, t = { mean: "Mittelwert", median: "Medianwert", sum: "Summe", discretePercentile: "Diskontinuierliches Perzentil", minimum: "Minimum", maximum: "Maximum", variance: "Varianz", count: "Anzahl", aggregation: "${ statistics } von ${ fieldName }", noAggregation: "Keine Aggregation" }, a = "Diagramm", i = "Mengenserie", n = "X-Achse", r = "Nicht verfügbar", m = { start: "Am ersten Datenpunkt fangen", end: "Am letzten Datenpunkt fangen" }, s = {
   chartType: e,
   statistics: t,
   defaultTitle: a,

package/dist/chunks/messages.de3.js

@@ -1,77 +1,14 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.157 */
-const _ = "ä_Play_________Ü", e = "ä_Stop_________Ü", o = "ä_Legend_____________Ü", r = "ä_Loading_______________Ü", t = "ä_Home_________Ü", s = "ä_Chart___________Ü", a = "ä_Series_____________Ü", n = "ä_Export_____________Ü", i = "ä_Image___________Ü", l = "ä_Data_________Ü", d = "ä_Print___________Ü", c = {
-  "Zoom Out": "ä_Zoom Out_________________Ü",
-  Play: _,
-  Stop: e,
-  Legend: o,
-  "Press ENTER to toggle": "ä_Press ENTER to toggle______________________Ü",
-  Loading: r,
-  Home: t,
-  Chart: s,
-  "Serial chart": "ä_Serial chart_____________Ü",
-  "X/Y chart": "ä_X/Y chart___________________Ü",
-  "Pie chart": "ä_Pie chart___________________Ü",
-  "Gauge chart": "ä_Gauge chart____________Ü",
-  "Radar chart": "ä_Radar chart____________Ü",
-  "Sankey diagram": "ä_Sankey diagram_______________Ü",
-  "Flow diagram": "ä_Flow diagram_____________Ü",
-  "Chord diagram": "ä_Chord diagram______________Ü",
-  "TreeMap chart": "ä_TreeMap chart______________Ü",
-  "Sliced chart": "ä_Sliced chart_____________Ü",
-  Series: a,
-  "Candlestick Series": "ä_Candlestick Series___________________Ü",
-  "OHLC Series": "ä_OHLC Series____________Ü",
-  "Column Series": "ä_Column Series______________Ü",
-  "Line Series": "ä_Line Series____________Ü",
-  "Pie Slice Series": "ä_Pie Slice Series_________________Ü",
-  "Funnel Series": "ä_Funnel Series______________Ü",
-  "Pyramid Series": "ä_Pyramid Series_______________Ü",
-  "X/Y Series": "ä_X/Y Series_____________________Ü",
-  Map: "ä_Map_______Ü",
-  "Press ENTER to zoom in": "ä_Press ENTER to zoom in_______________________Ü",
-  "Press ENTER to zoom out": "ä_Press ENTER to zoom out________________________Ü",
-  "Use arrow keys to zoom in and out": "ä_Use arrow keys to zoom in and out__________________Ü",
-  "Use plus and minus keys on your keyboard to zoom in and out": "ä_Use plus and minus keys on your keyboard to zoom in and out_______________________________Ü",
-  Export: n,
-  Image: i,
-  Data: l,
-  Print: d,
-  "Press ENTER to open": "ä_Press ENTER to open____________________Ü",
-  "Press ENTER to print.": "ä_Press ENTER to print______________________Ü.",
-  "Press ENTER to export as %1.": "ä_Press ENTER to export as %1_____________________________Ü.",
-  "(Press ESC to close this message)": "ä_(Press ESC to close this message)__________________Ü",
-  "Image Export Complete": "ä_Image Export Complete______________________Ü",
-  "Export operation took longer than expected. Something might have gone wrong.": "ä_Export operation took longer than expected. Something might have gone wrong_______________________________________Ü.",
-  "Saved from": "ä_Saved from_____________________Ü",
-  "Use TAB to select grip buttons or left and right arrows to change selection": "ä_Use TAB to select grip buttons or left and right arrows to change selection_______________________________________Ü",
-  "Use left and right arrows to move selection": "ä_Use left and right arrows to move selection_______________________Ü",
-  "Use left and right arrows to move left selection": "ä_Use left and right arrows to move left selection_________________________Ü",
-  "Use left and right arrows to move right selection": "ä_Use left and right arrows to move right selection__________________________Ü",
-  "Use TAB select grip buttons or up and down arrows to change selection": "ä_Use TAB select grip buttons or up and down arrows to change selection____________________________________Ü",
-  "Use up and down arrows to move selection": "ä_Use up and down arrows to move selection_____________________Ü",
-  "Use up and down arrows to move lower selection": "ä_Use up and down arrows to move lower selection________________________Ü",
-  "Use up and down arrows to move upper selection": "ä_Use up and down arrows to move upper selection________________________Ü",
-  "From %1 to %2": "ä_From %1 to %2______________Ü",
-  "From %1": "ä_From %1_______________Ü",
-  "To %1": "ä_To %1___________Ü",
-  "No parser available for file: %1": "ä_No parser available for file: %1_________________Ü",
-  "Error parsing file: %1": "ä_Error parsing file: %1_______________________Ü",
-  "Unable to load file: %1": "ä_Unable to load file: %1________________________Ü",
-  "Invalid date": "ä_Invalid date_____________Ü"
+v4.33.0-next.159 */
+const e = { percent: "Prozent", values: "Werte", standardizedValues: "Standardisierte Werte", count: "Anzahl", aggregationOfValues: "${ aggregation } von Werten", aggregationOfFieldName: "${ aggregation } von ${ fieldName }" }, g = { aggrFieldsByCategory: "${ aggregationFields } von ${ category }", aggrTypeCategory: "${ aggregationType } von ${ category }", aggrTypeCategoryBySplitBy: "${ aggregationType } nach ${ category } nach ${ splitByField }", aggrTypeOfAggrFields: "${ aggregationType } von ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationType } von ${ aggregationField } nach ${ category } nach ${ splitByField }", aggrTypeOfAggrFieldsByCategory: "${ aggregationType } von ${ aggregationFields } nach ${ category }", aggrFieldsByXAxisField: "${ aggregationFields } von ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType } von ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ aggregationType } nach ${ xAxisField } nach ${ splitByField }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationType } von ${ aggregationField } nach ${ xAxisField } nach ${ splitByField }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationType } von ${ aggregationFields } nach ${ xAxisField }", distributionOfField: "Verteilung von ${ valueField }", distributionOfFields: "Verteilung von ${ valueFields }", distributionOfFieldsByCategory: "Verteilung von ${ valueFields } nach ${ category }", distributionOfFieldsByCategoryAndSplitBy: "Verteilung von ${ valueFields } nach ${ category } und ${ splitByField }", xAndY: "${ x } und ${ y }" }, a = { barChart: "Balkendiagramm", lineChart: "Liniendiagramm", pieChart: "Kreisdiagramm", histogram: "Histogramm", scatterplot: "Scatterplot" }, i = {
+  axisLabels: e,
+  titleLabels: g,
+  chartType: a
 };
 export {
-  s as Chart,
-  l as Data,
-  n as Export,
-  t as Home,
-  i as Image,
-  o as Legend,
-  r as Loading,
-  _ as Play,
-  d as Print,
-  a as Series,
-  e as Stop,
-  c as default
+  e as axisLabels,
+  a as chartType,
+  i as default,
+  g as titleLabels
 };