@arcgis/charts-components 4.33.0-next.136 → 4.33.0-next.138

package/dist/chunks/messages.sl.js

@@ -1,14 +1,48 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.136 */
-const i = { percent: "Odstotek", values: "Vrednosti", standardizedValues: "Standardizirane vrednosti", count: "Število", aggregationOfValues: "${ aggregation } vrednosti", aggregationOfFieldName: "${ aggregation } od ${ fieldName }" }, e = { aggrFieldsByCategory: "${ aggregationFields } od ${ category }", aggrTypeCategory: "${ aggregationType } od ${ category }", aggrTypeCategoryBySplitBy: "${ aggregationType } od ${ category } od ${ splitByField }", aggrTypeOfAggrFields: "${ aggregationType } od ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationType } s/z ${ aggregationField } od ${ category } od ${ splitByField }", aggrTypeOfAggrFieldsByCategory: "${ aggregationType } s/z ${ aggregationFields } od ${ category }", aggrFieldsByXAxisField: "${ aggregationFields } od ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType } od ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ aggregationType } od ${ xAxisField } od ${ splitByField }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationType } s/z ${ aggregationField } od ${ xAxisField } od ${ splitByField }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationType } s/z ${ aggregationFields } od ${ xAxisField }", distributionOfField: "Distribucija ${ valueField }", distributionOfFields: "Distribucija ${ valueFields }", distributionOfFieldsByCategory: "Distribucija ${ valueFields } z ${ category }", distributionOfFieldsByCategoryAndSplitBy: "Distribucija ${ valueFields } z ${ category } in ${ splitByField }", xAndY: "${ x } in ${ y }" }, g = { barChart: "Palični grafikon", lineChart: "Linijski grafikon", pieChart: "Tortni grafikon", histogram: "Histogram", scatterPlot: "Raztreseni grafikon" }, a = {
-  axisLabels: i,
-  titleLabels: e,
-  chartType: g
+v4.33.0-next.138 */
+const e = "Med nalaganjem grafikona je prišlo do napake.", a = "Pretvorbe dnevnika ni mogoče uporabiti za negativne ali ničelne vrednosti.", t = "Pretvorbe kvadratnega korena ni mogoče uporabiti za negativne vrednosti.", o = "Med nalaganjem sloja je prišlo do napake. URL = ${ url }. ID elementa portala = ${ portalItemId }.", n = "Polja [${ fieldNames }] opredeljena v konfiguraciji niso bila najdena v sloju.", i = "${ dataPath } mora biti edinstveno. Serija z imenom ${ seriesName } ima ID (${ seriesID }), ki ga že uporablja druga serija.", r = "${ dataPath } ne more izvajati združevanja brez števila na neštevilskem polju.", s = "${ dataPath } manjka lastnost imenovana ${ missingProperty }.", l = "${ dataPath } ne sme biti krajše od ${ limit } znakov.", d = "${ dataPath } ne sme imeti manj kot ${ limit } elementov.", m = "${ dataPath } ne sme imeti več kot ${ limit } elementov.", p = "${ dataPath } mora vsebovati vsaj en znak, ki ni presledek.", v = "${ dataPath } ne sme imeti ${ additionalProperty }.", c = "${ dataPath } mora biti enak eni od teh dovoljenih vrednosti: ${ allowedValues }.", u = "${ dataPath } se mora ujemati s shemo ene od teh: ${ schemaOptions }.", j = "Raztreseni grafikoni s proporcionalnimi simboli niso podprti. Uporabljena je bila privzeta velikost simbolov.", $ = "Branje vhodnih podatkov ni uspelo.", k = "The queryBins operation is not supported on this service.", g = "Pričakovani tip niza z indeksom ${ seriesIndex } je '${ expectedType }', ampak '${ receivedType }' je bil prejet namesto", h = "ali", b = {
+  defaultError: e,
+  negativeValueInDataForLogTransformation: a,
+  negativeValueInDataForSqrtTransformation: t,
+  layerLoadFailure: o,
+  layerFieldsNotFound: n,
+  duplicateSeriesID: i,
+  nonNumericAggregation: r,
+  requiredProperty: s,
+  minLength: l,
+  minItems: d,
+  maxItems: m,
+  whiteSpacePattern: p,
+  additionalProperty: v,
+  enumValues: c,
+  anyOfValues: u,
+  bubbleChartValidateMsg: j,
+  queryError: $,
+  queryBinsNotSupported: k,
+  invalidSeriesType: g,
+  or: h
 };
 export {
-  i as axisLabels,
-  g as chartType,
-  a as default,
-  e as titleLabels
+  v as additionalProperty,
+  u as anyOfValues,
+  j as bubbleChartValidateMsg,
+  b as default,
+  e as defaultError,
+  i as duplicateSeriesID,
+  c as enumValues,
+  g as invalidSeriesType,
+  n as layerFieldsNotFound,
+  o as layerLoadFailure,
+  m as maxItems,
+  d as minItems,
+  l as minLength,
+  a as negativeValueInDataForLogTransformation,
+  t as negativeValueInDataForSqrtTransformation,
+  r as nonNumericAggregation,
+  h as or,
+  k as queryBinsNotSupported,
+  $ as queryError,
+  s as requiredProperty,
+  p as whiteSpacePattern
 };

package/dist/chunks/messages.sl2.js

@@ -1,46 +1,22 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.136 */
-const e = "Med nalaganjem grafikona je prišlo do napake.", a = "Pretvorbe dnevnika ni mogoče uporabiti za negativne ali ničelne vrednosti.", t = "Pretvorbe kvadratnega korena ni mogoče uporabiti za negativne vrednosti.", n = "Med nalaganjem sloja je prišlo do napake. URL = ${ url }. ID elementa portala = ${ portalItemId }.", i = "Polja [${ fieldNames }] opredeljena v konfiguraciji niso bila najdena v sloju.", o = "${ dataPath } mora biti edinstveno. Serija z imenom ${ seriesName } ima ID (${ seriesID }), ki ga že uporablja druga serija.", r = "${ dataPath } ne more izvajati združevanja brez števila na neštevilskem polju.", s = "${ dataPath } manjka lastnost imenovana ${ missingProperty }.", l = "${ dataPath } ne sme biti krajše od ${ limit } znakov.", d = "${ dataPath } ne sme imeti manj kot ${ limit } elementov.", m = "${ dataPath } ne sme imeti več kot ${ limit } elementov.", p = "${ dataPath } mora vsebovati vsaj en znak, ki ni presledek.", v = "${ dataPath } ne sme imeti ${ additionalProperty }.", c = "${ dataPath } mora biti enak eni od teh dovoljenih vrednosti: ${ allowedValues }.", j = "${ dataPath } se mora ujemati s shemo ene od teh: ${ schemaOptions }.", u = "Raztreseni grafikoni s proporcionalnimi simboli niso podprti. Uporabljena je bila privzeta velikost simbolov.", $ = "Branje vhodnih podatkov ni uspelo.", k = "Pričakovani tip niza z indeksom ${ seriesIndex } je '${ expectedType }', ampak '${ receivedType }' je bil prejet namesto", g = "ali", h = {
-  defaultError: e,
-  negativeValueInDataForLogTransformation: a,
-  negativeValueInDataForSqrtTransformation: t,
-  layerLoadFailure: n,
-  layerFieldsNotFound: i,
-  duplicateSeriesID: o,
-  nonNumericAggregation: r,
-  requiredProperty: s,
-  minLength: l,
-  minItems: d,
-  maxItems: m,
-  whiteSpacePattern: p,
-  additionalProperty: v,
-  enumValues: c,
-  anyOfValues: j,
-  bubbleChartValidateMsg: u,
-  queryError: $,
-  invalidSeriesType: k,
-  or: g
+v4.33.0-next.138 */
+const a = { chart: "Grafikon", barChart: "Palični grafikon", lineChart: "Linijski grafikon", pieChart: "Tortni grafikon", histogram: "Histogram", scatterplot: "Raztreseni grafikon", boxPlot: "Škatlasti graf" }, i = { mean: "Srednja vrednost", median: "Mediana", sum: "Vsota", discretePercentile: "Diskretni percentil", minimum: "Minimum", maximum: "Maksimum", variance: "Varianca", count: "Število", aggregation: "${ statistics } od ${ fieldName }", noAggregation: "Brez agregacije" }, t = "Grafikon", o = "Števec nizov", n = "Os X", e = "Ni na voljo", r = { start: "Privlači na prvo podatkovno točko", end: "Privlači na zadnjo podatkovno točko" }, s = {
+  chartType: a,
+  statistics: i,
+  defaultTitle: t,
+  countSeries: o,
+  xAxis: n,
+  notAvailable: e,
+  timeAggregationTypes: r
 };
 export {
-  v as additionalProperty,
-  j as anyOfValues,
-  u as bubbleChartValidateMsg,
-  h as default,
-  e as defaultError,
-  o as duplicateSeriesID,
-  c as enumValues,
-  k as invalidSeriesType,
-  i as layerFieldsNotFound,
-  n as layerLoadFailure,
-  m as maxItems,
-  d as minItems,
-  l as minLength,
-  a as negativeValueInDataForLogTransformation,
-  t as negativeValueInDataForSqrtTransformation,
-  r as nonNumericAggregation,
-  g as or,
-  $ as queryError,
-  s as requiredProperty,
-  p as whiteSpacePattern
+  a as chartType,
+  o as countSeries,
+  s as default,
+  t as defaultTitle,
+  e as notAvailable,
+  i as statistics,
+  r as timeAggregationTypes,
+  n as xAxis
 };

package/dist/chunks/messages.sl3.js

@@ -1,22 +1,77 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.136 */
-const a = { chart: "Grafikon", barChart: "Palični grafikon", lineChart: "Linijski grafikon", pieChart: "Tortni grafikon", histogram: "Histogram", scatterPlot: "Raztreseni grafikon", boxPlot: "Škatlasti graf" }, i = { mean: "Srednja vrednost", median: "Mediana", sum: "Vsota", discretePercentile: "Diskretni percentil", minimum: "Minimum", maximum: "Maksimum", variance: "Varianca", count: "Število", aggregation: "${ statistics } od ${ fieldName }", noAggregation: "Brez agregacije" }, t = "Grafikon", o = "Števec nizov", n = "Os X", e = "Ni na voljo", r = { start: "Privlači na prvo podatkovno točko", end: "Privlači na zadnjo podatkovno točko" }, s = {
-  chartType: a,
-  statistics: i,
-  defaultTitle: t,
-  countSeries: o,
-  xAxis: n,
-  notAvailable: e,
-  timeAggregationTypes: r
+v4.33.0-next.138 */
+const _ = "Š_Play_________č", e = "Š_Stop_________č", o = "Š_Legend_____________č", r = "Š_Loading_______________č", t = "Š_Home_________č", s = "Š_Chart___________č", a = "Š_Series_____________č", n = "Š_Export_____________č", i = "Š_Image___________č", l = "Š_Data_________č", d = "Š_Print___________č", c = {
+  "Zoom Out": "Š_Zoom Out_________________č",
+  Play: _,
+  Stop: e,
+  Legend: o,
+  "Press ENTER to toggle": "Š_Press ENTER to toggle______________________č",
+  Loading: r,
+  Home: t,
+  Chart: s,
+  "Serial chart": "Š_Serial chart_____________č",
+  "X/Y chart": "Š_X/Y chart___________________č",
+  "Pie chart": "Š_Pie chart___________________č",
+  "Gauge chart": "Š_Gauge chart____________č",
+  "Radar chart": "Š_Radar chart____________č",
+  "Sankey diagram": "Š_Sankey diagram_______________č",
+  "Flow diagram": "Š_Flow diagram_____________č",
+  "Chord diagram": "Š_Chord diagram______________č",
+  "TreeMap chart": "Š_TreeMap chart______________č",
+  "Sliced chart": "Š_Sliced chart_____________č",
+  Series: a,
+  "Candlestick Series": "Š_Candlestick Series___________________č",
+  "OHLC Series": "Š_OHLC Series____________č",
+  "Column Series": "Š_Column Series______________č",
+  "Line Series": "Š_Line Series____________č",
+  "Pie Slice Series": "Š_Pie Slice Series_________________č",
+  "Funnel Series": "Š_Funnel Series______________č",
+  "Pyramid Series": "Š_Pyramid Series_______________č",
+  "X/Y Series": "Š_X/Y Series_____________________č",
+  Map: "Š_Map_______č",
+  "Press ENTER to zoom in": "Š_Press ENTER to zoom in_______________________č",
+  "Press ENTER to zoom out": "Š_Press ENTER to zoom out________________________č",
+  "Use arrow keys to zoom in and out": "Š_Use arrow keys to zoom in and out__________________č",
+  "Use plus and minus keys on your keyboard to zoom in and out": "Š_Use plus and minus keys on your keyboard to zoom in and out_______________________________č",
+  Export: n,
+  Image: i,
+  Data: l,
+  Print: d,
+  "Press ENTER to open": "Š_Press ENTER to open____________________č",
+  "Press ENTER to print.": "Š_Press ENTER to print______________________č.",
+  "Press ENTER to export as %1.": "Š_Press ENTER to export as %1_____________________________č.",
+  "(Press ESC to close this message)": "Š_(Press ESC to close this message)__________________č",
+  "Image Export Complete": "Š_Image Export Complete______________________č",
+  "Export operation took longer than expected. Something might have gone wrong.": "Š_Export operation took longer than expected. Something might have gone wrong_______________________________________č.",
+  "Saved from": "Š_Saved from_____________________č",
+  "Use TAB to select grip buttons or left and right arrows to change selection": "Š_Use TAB to select grip buttons or left and right arrows to change selection_______________________________________č",
+  "Use left and right arrows to move selection": "Š_Use left and right arrows to move selection_______________________č",
+  "Use left and right arrows to move left selection": "Š_Use left and right arrows to move left selection_________________________č",
+  "Use left and right arrows to move right selection": "Š_Use left and right arrows to move right selection__________________________č",
+  "Use TAB select grip buttons or up and down arrows to change selection": "Š_Use TAB select grip buttons or up and down arrows to change selection____________________________________č",
+  "Use up and down arrows to move selection": "Š_Use up and down arrows to move selection_____________________č",
+  "Use up and down arrows to move lower selection": "Š_Use up and down arrows to move lower selection________________________č",
+  "Use up and down arrows to move upper selection": "Š_Use up and down arrows to move upper selection________________________č",
+  "From %1 to %2": "Š_From %1 to %2______________č",
+  "From %1": "Š_From %1_______________č",
+  "To %1": "Š_To %1___________č",
+  "No parser available for file: %1": "Š_No parser available for file: %1_________________č",
+  "Error parsing file: %1": "Š_Error parsing file: %1_______________________č",
+  "Unable to load file: %1": "Š_Unable to load file: %1________________________č",
+  "Invalid date": "Š_Invalid date_____________č"
 };
 export {
-  a as chartType,
-  o as countSeries,
-  s as default,
-  t as defaultTitle,
-  e as notAvailable,
-  i as statistics,
-  r as timeAggregationTypes,
-  n as xAxis
+  s as Chart,
+  l as Data,
+  n as Export,
+  t as Home,
+  i as Image,
+  o as Legend,
+  r as Loading,
+  _ as Play,
+  d as Print,
+  a as Series,
+  e as Stop,
+  c as default
 };

package/dist/chunks/messages.sl4.js

@@ -1,77 +1,14 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.136 */
-const _ = "Š_Play_________č", e = "Š_Stop_________č", o = "Š_Legend_____________č", r = "Š_Loading_______________č", t = "Š_Home_________č", s = "Š_Chart___________č", a = "Š_Series_____________č", n = "Š_Export_____________č", i = "Š_Image___________č", l = "Š_Data_________č", d = "Š_Print___________č", c = {
-  "Zoom Out": "Š_Zoom Out_________________č",
-  Play: _,
-  Stop: e,
-  Legend: o,
-  "Press ENTER to toggle": "Š_Press ENTER to toggle______________________č",
-  Loading: r,
-  Home: t,
-  Chart: s,
-  "Serial chart": "Š_Serial chart_____________č",
-  "X/Y chart": "Š_X/Y chart___________________č",
-  "Pie chart": "Š_Pie chart___________________č",
-  "Gauge chart": "Š_Gauge chart____________č",
-  "Radar chart": "Š_Radar chart____________č",
-  "Sankey diagram": "Š_Sankey diagram_______________č",
-  "Flow diagram": "Š_Flow diagram_____________č",
-  "Chord diagram": "Š_Chord diagram______________č",
-  "TreeMap chart": "Š_TreeMap chart______________č",
-  "Sliced chart": "Š_Sliced chart_____________č",
-  Series: a,
-  "Candlestick Series": "Š_Candlestick Series___________________č",
-  "OHLC Series": "Š_OHLC Series____________č",
-  "Column Series": "Š_Column Series______________č",
-  "Line Series": "Š_Line Series____________č",
-  "Pie Slice Series": "Š_Pie Slice Series_________________č",
-  "Funnel Series": "Š_Funnel Series______________č",
-  "Pyramid Series": "Š_Pyramid Series_______________č",
-  "X/Y Series": "Š_X/Y Series_____________________č",
-  Map: "Š_Map_______č",
-  "Press ENTER to zoom in": "Š_Press ENTER to zoom in_______________________č",
-  "Press ENTER to zoom out": "Š_Press ENTER to zoom out________________________č",
-  "Use arrow keys to zoom in and out": "Š_Use arrow keys to zoom in and out__________________č",
-  "Use plus and minus keys on your keyboard to zoom in and out": "Š_Use plus and minus keys on your keyboard to zoom in and out_______________________________č",
-  Export: n,
-  Image: i,
-  Data: l,
-  Print: d,
-  "Press ENTER to open": "Š_Press ENTER to open____________________č",
-  "Press ENTER to print.": "Š_Press ENTER to print______________________č.",
-  "Press ENTER to export as %1.": "Š_Press ENTER to export as %1_____________________________č.",
-  "(Press ESC to close this message)": "Š_(Press ESC to close this message)__________________č",
-  "Image Export Complete": "Š_Image Export Complete______________________č",
-  "Export operation took longer than expected. Something might have gone wrong.": "Š_Export operation took longer than expected. Something might have gone wrong_______________________________________č.",
-  "Saved from": "Š_Saved from_____________________č",
-  "Use TAB to select grip buttons or left and right arrows to change selection": "Š_Use TAB to select grip buttons or left and right arrows to change selection_______________________________________č",
-  "Use left and right arrows to move selection": "Š_Use left and right arrows to move selection_______________________č",
-  "Use left and right arrows to move left selection": "Š_Use left and right arrows to move left selection_________________________č",
-  "Use left and right arrows to move right selection": "Š_Use left and right arrows to move right selection__________________________č",
-  "Use TAB select grip buttons or up and down arrows to change selection": "Š_Use TAB select grip buttons or up and down arrows to change selection____________________________________č",
-  "Use up and down arrows to move selection": "Š_Use up and down arrows to move selection_____________________č",
-  "Use up and down arrows to move lower selection": "Š_Use up and down arrows to move lower selection________________________č",
-  "Use up and down arrows to move upper selection": "Š_Use up and down arrows to move upper selection________________________č",
-  "From %1 to %2": "Š_From %1 to %2______________č",
-  "From %1": "Š_From %1_______________č",
-  "To %1": "Š_To %1___________č",
-  "No parser available for file: %1": "Š_No parser available for file: %1_________________č",
-  "Error parsing file: %1": "Š_Error parsing file: %1_______________________č",
-  "Unable to load file: %1": "Š_Unable to load file: %1________________________č",
-  "Invalid date": "Š_Invalid date_____________č"
+v4.33.0-next.138 */
+const i = { percent: "Odstotek", values: "Vrednosti", standardizedValues: "Standardizirane vrednosti", count: "Število", aggregationOfValues: "${ aggregation } vrednosti", aggregationOfFieldName: "${ aggregation } od ${ fieldName }" }, e = { aggrFieldsByCategory: "${ aggregationFields } od ${ category }", aggrTypeCategory: "${ aggregationType } od ${ category }", aggrTypeCategoryBySplitBy: "${ aggregationType } od ${ category } od ${ splitByField }", aggrTypeOfAggrFields: "${ aggregationType } od ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationType } s/z ${ aggregationField } od ${ category } od ${ splitByField }", aggrTypeOfAggrFieldsByCategory: "${ aggregationType } s/z ${ aggregationFields } od ${ category }", aggrFieldsByXAxisField: "${ aggregationFields } od ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType } od ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ aggregationType } od ${ xAxisField } od ${ splitByField }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationType } s/z ${ aggregationField } od ${ xAxisField } od ${ splitByField }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationType } s/z ${ aggregationFields } od ${ xAxisField }", distributionOfField: "Distribucija ${ valueField }", distributionOfFields: "Distribucija ${ valueFields }", distributionOfFieldsByCategory: "Distribucija ${ valueFields } z ${ category }", distributionOfFieldsByCategoryAndSplitBy: "Distribucija ${ valueFields } z ${ category } in ${ splitByField }", xAndY: "${ x } in ${ y }" }, g = { barChart: "Palični grafikon", lineChart: "Linijski grafikon", pieChart: "Tortni grafikon", histogram: "Histogram", scatterplot: "Raztreseni grafikon" }, a = {
+  axisLabels: i,
+  titleLabels: e,
+  chartType: g
 };
 export {
-  s as Chart,
-  l as Data,
-  n as Export,
-  t as Home,
-  i as Image,
-  o as Legend,
-  r as Loading,
-  _ as Play,
-  d as Print,
-  a as Series,
-  e as Stop,
-  c as default
+  i as axisLabels,
+  g as chartType,
+  a as default,
+  e as titleLabels
 };

package/dist/chunks/messages.sr.js

@@ -1,14 +1,48 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.136 */
-const e = { percent: "Procenat", values: "Vrednosti", standardizedValues: "STandardizovane vrednosti", count: "Broj", aggregationOfValues: "${ aggregation } od vrednosti", aggregationOfFieldName: "${ aggregation } od ${ fieldName }" }, i = { aggrFieldsByCategory: "${ aggregationFields } od strane ${ category }", aggrTypeCategory: "${ aggregationType } od strane ${ category }", aggrTypeCategoryBySplitBy: "${ aggregationType } od ${ category } od ${ splitByField }", aggrTypeOfAggrFields: "${ aggregationType } od ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationType } od ${ aggregationField } od ${ category } od ${ splitByField }", aggrTypeOfAggrFieldsByCategory: "${ aggregationType } od ${ aggregationFields } od ${ category }", aggrFieldsByXAxisField: "${ aggregationFields } od strane ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType } od strane ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ aggregationType } od ${ xAxisField } od ${ splitByField }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationType } od ${ aggregationField } od ${ xAxisField } od ${ splitByField }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationType } od ${ aggregationFields } od ${ xAxisField }", distributionOfField: "DIstribucija za ${ valueField }", distributionOfFields: "DIstribucija za ${ valueFields }", distributionOfFieldsByCategory: "Distribucija ${ valueFields } po ${ category }", distributionOfFieldsByCategoryAndSplitBy: "Distribucija ${ valueFields } po ${ category } i ${ splitByField }", xAndY: "${ x } i ${ y }" }, g = { barChart: "Trakasti grafikon", lineChart: "Linijski grafikon", pieChart: "Kružni grafikon", histogram: "Histogram", scatterPlot: "Grafikon" }, a = {
-  axisLabels: e,
-  titleLabels: i,
-  chartType: g
+v4.33.0-next.138 */
+const a = "Došlo je do greške prilikom učitavanja grafika.", e = "Nije moguće primeniti transformaciju zapisa na negativne ili nulte vrednosti.", o = "Nije moguće primeniti transformaiju kvadratnog korena na negativne vrednosti.", i = "Došlo je do greške prilikom učitavanja sloja. URL = ${ url }. ID stavke portala = ${ portalItemId }.", n = "Polja [${ fieldNames }] definisana u konfiguraciji nisu pronađena u sloju.", t = "${ dataPath } mora da bude jedinstven. Serija pod nazivom ${ seriesName } ima ID (${ seriesID }) koji se već koristi od strane drugih serija.", r = "${ dataPath } ne može da obavi agregaciju bez brojanja na numeričkom polju.", s = "${ dataPath } nedostaje svojstvo pod nazivom ${ missingProperty }.", d = "${ dataPath } ne sme da bude kraće od ${ limit } karaktera.", m = "${ dataPath } ne sme da ima manje od ${ limit } stavki.", l = "${ dataPath } ne sme da ima više od ${ limit } stavki.", u = "${ dataPath } mora da ima bar jedan karakter koji nije prazan.", j = "${ dataPath } ne sme da ima ${ additionalProperty }.", p = "${ dataPath } mora da bude jednako jednoj od ovih dozvoljenih vrednosti: ${ allowedValues }.", c = "${ dataPath } mora da odgovara šemi jednog od ovih: ${ schemaOptions }.", v = "Nacrti šablona sa proporcionalnim simbolima nisu podržani. Podrazumevana veličina šablona je primenjena.", g = "Neuspešno čitanje ulaznih podataka.", $ = "The queryBins operation is not supported on this service.", k = "Očekivani tip serije za indeks ${ seriesIndex } je '${ expectedType }' ali je '${ receivedType }' dobijeno umesto toga", h = "ili", P = {
+  defaultError: a,
+  negativeValueInDataForLogTransformation: e,
+  negativeValueInDataForSqrtTransformation: o,
+  layerLoadFailure: i,
+  layerFieldsNotFound: n,
+  duplicateSeriesID: t,
+  nonNumericAggregation: r,
+  requiredProperty: s,
+  minLength: d,
+  minItems: m,
+  maxItems: l,
+  whiteSpacePattern: u,
+  additionalProperty: j,
+  enumValues: p,
+  anyOfValues: c,
+  bubbleChartValidateMsg: v,
+  queryError: g,
+  queryBinsNotSupported: $,
+  invalidSeriesType: k,
+  or: h
 };
 export {
-  e as axisLabels,
-  g as chartType,
-  a as default,
-  i as titleLabels
+  j as additionalProperty,
+  c as anyOfValues,
+  v as bubbleChartValidateMsg,
+  P as default,
+  a as defaultError,
+  t as duplicateSeriesID,
+  p as enumValues,
+  k as invalidSeriesType,
+  n as layerFieldsNotFound,
+  i as layerLoadFailure,
+  l as maxItems,
+  m as minItems,
+  d as minLength,
+  e as negativeValueInDataForLogTransformation,
+  o as negativeValueInDataForSqrtTransformation,
+  r as nonNumericAggregation,
+  h as or,
+  $ as queryBinsNotSupported,
+  g as queryError,
+  s as requiredProperty,
+  u as whiteSpacePattern
 };

package/dist/chunks/messages.sr2.js

@@ -1,46 +1,22 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.136 */
-const a = "Došlo je do greške prilikom učitavanja grafika.", e = "Nije moguće primeniti transformaciju zapisa na negativne ili nulte vrednosti.", o = "Nije moguće primeniti transformaiju kvadratnog korena na negativne vrednosti.", i = "Došlo je do greške prilikom učitavanja sloja. URL = ${ url }. ID stavke portala = ${ portalItemId }.", n = "Polja [${ fieldNames }] definisana u konfiguraciji nisu pronađena u sloju.", t = "${ dataPath } mora da bude jedinstven. Serija pod nazivom ${ seriesName } ima ID (${ seriesID }) koji se već koristi od strane drugih serija.", r = "${ dataPath } ne može da obavi agregaciju bez brojanja na numeričkom polju.", s = "${ dataPath } nedostaje svojstvo pod nazivom ${ missingProperty }.", d = "${ dataPath } ne sme da bude kraće od ${ limit } karaktera.", m = "${ dataPath } ne sme da ima manje od ${ limit } stavki.", l = "${ dataPath } ne sme da ima više od ${ limit } stavki.", u = "${ dataPath } mora da ima bar jedan karakter koji nije prazan.", j = "${ dataPath } ne sme da ima ${ additionalProperty }.", c = "${ dataPath } mora da bude jednako jednoj od ovih dozvoljenih vrednosti: ${ allowedValues }.", p = "${ dataPath } mora da odgovara šemi jednog od ovih: ${ schemaOptions }.", v = "Nacrti šablona sa proporcionalnim simbolima nisu podržani. Podrazumevana veličina šablona je primenjena.", g = "Neuspešno čitanje ulaznih podataka.", $ = "Očekivani tip serije za indeks ${ seriesIndex } je '${ expectedType }' ali je '${ receivedType }' dobijeno umesto toga", k = "ili", h = {
-  defaultError: a,
-  negativeValueInDataForLogTransformation: e,
-  negativeValueInDataForSqrtTransformation: o,
-  layerLoadFailure: i,
-  layerFieldsNotFound: n,
-  duplicateSeriesID: t,
-  nonNumericAggregation: r,
-  requiredProperty: s,
-  minLength: d,
-  minItems: m,
-  maxItems: l,
-  whiteSpacePattern: u,
-  additionalProperty: j,
-  enumValues: c,
-  anyOfValues: p,
-  bubbleChartValidateMsg: v,
-  queryError: g,
-  invalidSeriesType: $,
-  or: k
+v4.33.0-next.138 */
+const a = { chart: "Grafikon", barChart: "Trakasti grafikon", lineChart: "Linijski grafikon", pieChart: "Kružni grafikon", histogram: "Histogram", scatterplot: "Grafikon", boxPlot: "Kvadratni grafikon" }, i = { mean: "Sredina", median: "Medijana", sum: "Zbir", discretePercentile: "Diskretni percentil", minimum: "Minimum", maximum: "Maksimum", variance: "Odstupanje", count: "Broj", aggregation: "${ statistics } od ${ fieldName }", noAggregation: "Nema grupisanja" }, t = "Grafikon", n = "Broj serija", e = "X-osa", r = "Nije dostupno", s = { start: "Zakači za prvu tačku podataka", end: "Zakači za zadnju tačku podataka" }, o = {
+  chartType: a,
+  statistics: i,
+  defaultTitle: t,
+  countSeries: n,
+  xAxis: e,
+  notAvailable: r,
+  timeAggregationTypes: s
 };
 export {
-  j as additionalProperty,
-  p as anyOfValues,
-  v as bubbleChartValidateMsg,
-  h as default,
-  a as defaultError,
-  t as duplicateSeriesID,
-  c as enumValues,
-  $ as invalidSeriesType,
-  n as layerFieldsNotFound,
-  i as layerLoadFailure,
-  l as maxItems,
-  m as minItems,
-  d as minLength,
-  e as negativeValueInDataForLogTransformation,
-  o as negativeValueInDataForSqrtTransformation,
-  r as nonNumericAggregation,
-  k as or,
-  g as queryError,
-  s as requiredProperty,
-  u as whiteSpacePattern
+  a as chartType,
+  n as countSeries,
+  o as default,
+  t as defaultTitle,
+  r as notAvailable,
+  i as statistics,
+  s as timeAggregationTypes,
+  e as xAxis
 };

package/dist/chunks/messages.sr3.js

@@ -1,22 +1,77 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.136 */
-const a = { chart: "Grafikon", barChart: "Trakasti grafikon", lineChart: "Linijski grafikon", pieChart: "Kružni grafikon", histogram: "Histogram", scatterPlot: "Grafikon", boxPlot: "Kvadratni grafikon" }, i = { mean: "Sredina", median: "Medijana", sum: "Zbir", discretePercentile: "Diskretni percentil", minimum: "Minimum", maximum: "Maksimum", variance: "Odstupanje", count: "Broj", aggregation: "${ statistics } od ${ fieldName }", noAggregation: "Nema grupisanja" }, t = "Grafikon", n = "Broj serija", e = "X-osa", r = "Nije dostupno", s = { start: "Zakači za prvu tačku podataka", end: "Zakači za zadnju tačku podataka" }, o = {
-  chartType: a,
-  statistics: i,
-  defaultTitle: t,
-  countSeries: n,
-  xAxis: e,
-  notAvailable: r,
-  timeAggregationTypes: s
+v4.33.0-next.138 */
+const _ = "Č_Play_________ž", e = "Č_Stop_________ž", o = "Č_Legend_____________ž", r = "Č_Loading_______________ž", t = "Č_Home_________ž", s = "Č_Chart___________ž", a = "Č_Series_____________ž", n = "Č_Export_____________ž", i = "Č_Image___________ž", l = "Č_Data_________ž", d = "Č_Print___________ž", c = {
+  "Zoom Out": "Č_Zoom Out_________________ž",
+  Play: _,
+  Stop: e,
+  Legend: o,
+  "Press ENTER to toggle": "Č_Press ENTER to toggle______________________ž",
+  Loading: r,
+  Home: t,
+  Chart: s,
+  "Serial chart": "Č_Serial chart_____________ž",
+  "X/Y chart": "Č_X/Y chart___________________ž",
+  "Pie chart": "Č_Pie chart___________________ž",
+  "Gauge chart": "Č_Gauge chart____________ž",
+  "Radar chart": "Č_Radar chart____________ž",
+  "Sankey diagram": "Č_Sankey diagram_______________ž",
+  "Flow diagram": "Č_Flow diagram_____________ž",
+  "Chord diagram": "Č_Chord diagram______________ž",
+  "TreeMap chart": "Č_TreeMap chart______________ž",
+  "Sliced chart": "Č_Sliced chart_____________ž",
+  Series: a,
+  "Candlestick Series": "Č_Candlestick Series___________________ž",
+  "OHLC Series": "Č_OHLC Series____________ž",
+  "Column Series": "Č_Column Series______________ž",
+  "Line Series": "Č_Line Series____________ž",
+  "Pie Slice Series": "Č_Pie Slice Series_________________ž",
+  "Funnel Series": "Č_Funnel Series______________ž",
+  "Pyramid Series": "Č_Pyramid Series_______________ž",
+  "X/Y Series": "Č_X/Y Series_____________________ž",
+  Map: "Č_Map_______ž",
+  "Press ENTER to zoom in": "Č_Press ENTER to zoom in_______________________ž",
+  "Press ENTER to zoom out": "Č_Press ENTER to zoom out________________________ž",
+  "Use arrow keys to zoom in and out": "Č_Use arrow keys to zoom in and out__________________ž",
+  "Use plus and minus keys on your keyboard to zoom in and out": "Č_Use plus and minus keys on your keyboard to zoom in and out_______________________________ž",
+  Export: n,
+  Image: i,
+  Data: l,
+  Print: d,
+  "Press ENTER to open": "Č_Press ENTER to open____________________ž",
+  "Press ENTER to print.": "Č_Press ENTER to print______________________ž.",
+  "Press ENTER to export as %1.": "Č_Press ENTER to export as %1_____________________________ž.",
+  "(Press ESC to close this message)": "Č_(Press ESC to close this message)__________________ž",
+  "Image Export Complete": "Č_Image Export Complete______________________ž",
+  "Export operation took longer than expected. Something might have gone wrong.": "Č_Export operation took longer than expected. Something might have gone wrong_______________________________________ž.",
+  "Saved from": "Č_Saved from_____________________ž",
+  "Use TAB to select grip buttons or left and right arrows to change selection": "Č_Use TAB to select grip buttons or left and right arrows to change selection_______________________________________ž",
+  "Use left and right arrows to move selection": "Č_Use left and right arrows to move selection_______________________ž",
+  "Use left and right arrows to move left selection": "Č_Use left and right arrows to move left selection_________________________ž",
+  "Use left and right arrows to move right selection": "Č_Use left and right arrows to move right selection__________________________ž",
+  "Use TAB select grip buttons or up and down arrows to change selection": "Č_Use TAB select grip buttons or up and down arrows to change selection____________________________________ž",
+  "Use up and down arrows to move selection": "Č_Use up and down arrows to move selection_____________________ž",
+  "Use up and down arrows to move lower selection": "Č_Use up and down arrows to move lower selection________________________ž",
+  "Use up and down arrows to move upper selection": "Č_Use up and down arrows to move upper selection________________________ž",
+  "From %1 to %2": "Č_From %1 to %2______________ž",
+  "From %1": "Č_From %1_______________ž",
+  "To %1": "Č_To %1___________ž",
+  "No parser available for file: %1": "Č_No parser available for file: %1_________________ž",
+  "Error parsing file: %1": "Č_Error parsing file: %1_______________________ž",
+  "Unable to load file: %1": "Č_Unable to load file: %1________________________ž",
+  "Invalid date": "Č_Invalid date_____________ž"
 };
 export {
-  a as chartType,
-  n as countSeries,
-  o as default,
-  t as defaultTitle,
-  r as notAvailable,
-  i as statistics,
-  s as timeAggregationTypes,
-  e as xAxis
+  s as Chart,
+  l as Data,
+  n as Export,
+  t as Home,
+  i as Image,
+  o as Legend,
+  r as Loading,
+  _ as Play,
+  d as Print,
+  a as Series,
+  e as Stop,
+  c as default
 };