@aptos-labs/ts-sdk 1.35.0-zeta.2 → 1.36.0

package/src/internal/move/jwks/build/jwk/sources/dependencies/AptosFramework/aggregator.move

@@ -1,48 +0,0 @@
-/// This module provides an interface for aggregators. Aggregators are similar to
-/// unsigned integers and support addition and subtraction (aborting on underflow
-/// or on overflowing a custom upper limit). The difference from integers is that
-/// aggregators allow to perform both additions and subtractions in parallel across
-/// multiple transactions, enabling parallel execution. For example, if the first
-/// transaction is doing `add(X, 1)` for aggregator resource `X`, and the second
-/// is doing `sub(X,3)`, they can be executed in parallel avoiding a read-modify-write
-/// dependency.
-/// However, reading the aggregator value (i.e. calling `read(X)`) is an expensive
-/// operation and should be avoided as much as possible because it reduces the
-/// parallelism. Moreover, **aggregators can only be created by Aptos Framework (0x1)
-/// at the moment.**
-module aptos_framework::aggregator {
-
-    /// The value of aggregator overflows. Raised by native code.
-    const EAGGREGATOR_OVERFLOW: u64 = 1;
-
-    /// The value of aggregator underflows (goes below zero). Raised by native code.
-    const EAGGREGATOR_UNDERFLOW: u64 = 2;
-
-    /// Aggregator feature is not supported. Raised by native code.
-    const ENOT_SUPPORTED: u64 = 3;
-
-    /// Represents an integer which supports parallel additions and subtractions
-    /// across multiple transactions. See the module description for more details.
-    struct Aggregator has store {
-        handle: address,
-        key: address,
-        limit: u128,
-    }
-
-    /// Returns `limit` exceeding which aggregator overflows.
-    public fun limit(aggregator: &Aggregator): u128 {
-        aggregator.limit
-    }
-
-    /// Adds `value` to aggregator. Aborts on overflowing the limit.
-    public native fun add(aggregator: &mut Aggregator, value: u128);
-
-    /// Subtracts `value` from aggregator. Aborts on going below zero.
-    public native fun sub(aggregator: &mut Aggregator, value: u128);
-
-    /// Returns a value stored in this aggregator.
-    public native fun read(aggregator: &Aggregator): u128;
-
-    /// Destroys an aggregator and removes it from its `AggregatorFactory`.
-    public native fun destroy(aggregator: Aggregator);
-}

package/src/internal/move/jwks/build/jwk/sources/dependencies/AptosFramework/aggregator_factory.move

@@ -1,66 +0,0 @@
-/// This module provides foundations to create aggregators. Currently only
-/// Aptos Framework (0x1) can create them, so this module helps to wrap
-/// the constructor of `Aggregator` struct so that only a system account
-/// can initialize one. In the future, this might change and aggregators
-/// can be enabled for the public.
-module aptos_framework::aggregator_factory {
-    use std::error;
-
-    use aptos_framework::system_addresses;
-    use aptos_framework::aggregator::Aggregator;
-    use aptos_std::table::{Self, Table};
-
-    friend aptos_framework::genesis;
-    friend aptos_framework::optional_aggregator;
-
-    /// Aggregator factory is not published yet.
-    const EAGGREGATOR_FACTORY_NOT_FOUND: u64 = 1;
-
-    /// Creates new aggregators. Used to control the numbers of aggregators in the
-    /// system and who can create them. At the moment, only Aptos Framework (0x1)
-    /// account can.
-    struct AggregatorFactory has key {
-        phantom_table: Table<address, u128>,
-    }
-
-    /// Creates a new factory for aggregators. Can only be called during genesis.
-    public(friend) fun initialize_aggregator_factory(aptos_framework: &signer) {
-        system_addresses::assert_aptos_framework(aptos_framework);
-        let aggregator_factory = AggregatorFactory {
-            phantom_table: table::new()
-        };
-        move_to(aptos_framework, aggregator_factory);
-    }
-
-    /// Creates a new aggregator instance which overflows on exceeding a `limit`.
-    public(friend) fun create_aggregator_internal(limit: u128): Aggregator acquires AggregatorFactory {
-        assert!(
-            exists<AggregatorFactory>(@aptos_framework),
-            error::not_found(EAGGREGATOR_FACTORY_NOT_FOUND)
-        );
-
-        let aggregator_factory = borrow_global_mut<AggregatorFactory>(@aptos_framework);
-        new_aggregator(aggregator_factory, limit)
-    }
-
-    /// This is currently a function closed for public. This can be updated in the future by on-chain governance
-    /// to allow any signer to call.
-    public fun create_aggregator(account: &signer, limit: u128): Aggregator acquires AggregatorFactory {
-        // Only Aptos Framework (0x1) account can call this for now.
-        system_addresses::assert_aptos_framework(account);
-        create_aggregator_internal(limit)
-    }
-
-    /// Returns a new aggregator.
-    native fun new_aggregator(aggregator_factory: &mut AggregatorFactory, limit: u128): Aggregator;
-
-    #[test_only]
-    public fun initialize_aggregator_factory_for_test(aptos_framework: &signer) {
-        initialize_aggregator_factory(aptos_framework);
-    }
-
-    #[test_only]
-    public fun aggregator_factory_exists_for_testing(): bool {
-        exists<AggregatorFactory>(@aptos_framework)
-    }
-}

package/src/internal/move/jwks/build/jwk/sources/dependencies/AptosFramework/aggregator_v2.move

@@ -1,280 +0,0 @@
-/// This module provides an interface for aggregators (version 2). Aggregators are
-/// similar to unsigned integers and support addition and subtraction (aborting on
-/// underflow or on overflowing a custom upper limit). The difference from integers
-/// is that aggregators allow to perform both additions and subtractions in parallel
-/// across multiple transactions, enabling parallel execution. For example, if the
-/// first transaction is doing `try_add(X, 1)` for aggregator `X`, and the second is
-/// doing `try_sub(X,3)`, they can be executed in parallel avoiding a read-modify-write
-/// dependency.
-/// However, reading the aggregator value (i.e. calling `read(X)`) is a resource-intensive
-/// operation that also reduced parallelism, and should be avoided as much as possible.
-/// If you need to capture the value, without revealing it, use snapshot function instead,
-/// which has no parallelism impact.
-///
-/// From parallelism considerations, there are three different levels of effects:
-/// * enable full parallelism (cannot create conflicts):
-///     max_value, create_*, snapshot, derive_string_concat
-/// * enable speculative parallelism (generally parallel via branch prediction)
-///     try_add, add, try_sub, sub, is_at_least
-/// * create read/write conflicts, as if you were using a regular field
-///     read, read_snapshot, read_derived_string
-module aptos_framework::aggregator_v2 {
-    use std::error;
-    use std::features;
-    use std::string::String;
-
-    /// The value of aggregator overflows. Raised by uncoditional add() call
-    const EAGGREGATOR_OVERFLOW: u64 = 1;
-
-    /// The value of aggregator underflows (goes below zero). Raised by uncoditional sub() call
-    const EAGGREGATOR_UNDERFLOW: u64 = 2;
-
-    /// The generic type supplied to the aggregator snapshot is not supported.
-    const EUNSUPPORTED_AGGREGATOR_SNAPSHOT_TYPE: u64 = 5;
-
-    /// The aggregator api v2 feature flag is not enabled.
-    const EAGGREGATOR_API_V2_NOT_ENABLED: u64 = 6;
-
-    /// The generic type supplied to the aggregator is not supported.
-    const EUNSUPPORTED_AGGREGATOR_TYPE: u64 = 7;
-
-    /// Arguments passed to concat exceed max limit of 256 bytes (for prefix and suffix together).
-    const ECONCAT_STRING_LENGTH_TOO_LARGE: u64 = 8;
-
-    /// The native aggregator function, that is in the move file, is not yet supported.
-    /// and any calls will raise this error.
-    const EAGGREGATOR_FUNCTION_NOT_YET_SUPPORTED: u64 = 9;
-
-    /// Represents an integer which supports parallel additions and subtractions
-    /// across multiple transactions. See the module description for more details.
-    ///
-    /// Currently supported types for IntElement are u64 and u128.
-    struct Aggregator<IntElement> has store, drop {
-        value: IntElement,
-        max_value: IntElement,
-    }
-
-    /// Represents a constant value, that was derived from an aggregator at given instant in time.
-    /// Unlike read() and storing the value directly, this enables parallel execution of transactions,
-    /// while storing snapshot of aggregator state elsewhere.
-    struct AggregatorSnapshot<IntElement> has store, drop {
-        value: IntElement,
-    }
-
-    struct DerivedStringSnapshot has store, drop {
-        value: String,
-        padding: vector<u8>,
-    }
-
-    /// Returns `max_value` exceeding which aggregator overflows.
-    public fun max_value<IntElement: copy + drop>(aggregator: &Aggregator<IntElement>): IntElement {
-        aggregator.max_value
-    }
-
-    /// Creates new aggregator, with given 'max_value'.
-    ///
-    /// Currently supported types for IntElement are u64 and u128.
-    /// EAGGREGATOR_ELEMENT_TYPE_NOT_SUPPORTED raised if called with a different type.
-    public native fun create_aggregator<IntElement: copy + drop>(max_value: IntElement): Aggregator<IntElement>;
-
-    public fun create_aggregator_with_value<IntElement: copy + drop>(start_value: IntElement, max_value: IntElement): Aggregator<IntElement> {
-        let aggregator = create_aggregator(max_value);
-        add(&mut aggregator, start_value);
-        aggregator
-    }
-
-    /// Creates new aggregator, without any 'max_value' on top of the implicit bound restriction
-    /// due to the width of the type (i.e. MAX_U64 for u64, MAX_U128 for u128).
-    ///
-    /// Currently supported types for IntElement are u64 and u128.
-    /// EAGGREGATOR_ELEMENT_TYPE_NOT_SUPPORTED raised if called with a different type.
-    public native fun create_unbounded_aggregator<IntElement: copy + drop>(): Aggregator<IntElement>;
-
-    public fun create_unbounded_aggregator_with_value<IntElement: copy + drop>(start_value: IntElement): Aggregator<IntElement> {
-        let aggregator = create_unbounded_aggregator();
-        add(&mut aggregator, start_value);
-        aggregator
-    }
-
-    /// Adds `value` to aggregator.
-    /// If addition would exceed the max_value, `false` is returned, and aggregator value is left unchanged.
-    ///
-    /// Parallelism info: This operation enables speculative parallelism.
-    public native fun try_add<IntElement>(aggregator: &mut Aggregator<IntElement>, value: IntElement): bool;
-
-    /// Adds `value` to aggregator, unconditionally.
-    /// If addition would exceed the max_value, EAGGREGATOR_OVERFLOW exception will be thrown.
-    ///
-    /// Parallelism info: This operation enables speculative parallelism.
-    public fun add<IntElement>(aggregator: &mut Aggregator<IntElement>, value: IntElement) {
-        assert!(try_add(aggregator, value), error::out_of_range(EAGGREGATOR_OVERFLOW));
-    }
-
-    /// Subtracts `value` from aggregator.
-    /// If subtraction would result in a negative value, `false` is returned, and aggregator value is left unchanged.
-    ///
-    /// Parallelism info: This operation enables speculative parallelism.
-    public native fun try_sub<IntElement>(aggregator: &mut Aggregator<IntElement>, value: IntElement): bool;
-
-    // Subtracts `value` to aggregator, unconditionally.
-    // If subtraction would result in a negative value, EAGGREGATOR_UNDERFLOW exception will be thrown.
-    ///
-    /// Parallelism info: This operation enables speculative parallelism.
-    public fun sub<IntElement>(aggregator: &mut Aggregator<IntElement>, value: IntElement) {
-        assert!(try_sub(aggregator, value), error::out_of_range(EAGGREGATOR_UNDERFLOW));
-    }
-
-    native fun is_at_least_impl<IntElement>(aggregator: &Aggregator<IntElement>, min_amount: IntElement): bool;
-
-    /// Returns true if aggregator value is larger than or equal to the given `min_amount`, false otherwise.
-    ///
-    /// This operation is more efficient and much more parallelization friendly than calling `read(agg) > min_amount`.
-    /// Until traits are deployed, `is_at_most`/`is_equal` utility methods can be derived from this one (assuming +1 doesn't overflow):
-    /// - for `is_at_most(agg, max_amount)`, you can do `!is_at_least(max_amount + 1)`
-    /// - for `is_equal(agg, value)`, you can do `is_at_least(value) && !is_at_least(value + 1)`
-    ///
-    /// Parallelism info: This operation enables speculative parallelism.
-    public fun is_at_least<IntElement>(aggregator: &Aggregator<IntElement>, min_amount: IntElement): bool {
-        assert!(features::aggregator_v2_is_at_least_api_enabled(), EAGGREGATOR_API_V2_NOT_ENABLED);
-        is_at_least_impl(aggregator, min_amount)
-    }
-
-    // TODO waiting for integer traits
-    // public fun is_at_most<IntElement>(aggregator: &Aggregator<IntElement>, max_amount: IntElement): bool {
-    //     !is_at_least(max_amount + 1)
-    // }
-
-    // TODO waiting for integer traits
-    // public fun is_equal<IntElement>(aggregator: &Aggregator<IntElement>, value: IntElement): bool {
-    //     is_at_least(value) && !is_at_least(value + 1)
-    // }
-
-    /// Returns a value stored in this aggregator.
-    /// Note: This operation is resource-intensive, and reduces parallelism.
-    /// If you need to capture the value, without revealing it, use snapshot function instead,
-    /// which has no parallelism impact.
-    /// If called in a transaction that also modifies the aggregator, or has other read/write conflicts,
-    /// it will sequentialize that transaction. (i.e. up to concurrency_level times slower)
-    /// If called in a separate transaction (i.e. after transaction that modifies aggregator), it might be
-    /// up to two times slower.
-    ///
-    /// Parallelism info: This operation *prevents* speculative parallelism.
-    public native fun read<IntElement>(aggregator: &Aggregator<IntElement>): IntElement;
-
-    /// Returns a wrapper of a current value of an aggregator
-    /// Unlike read(), it is fast and avoids sequential dependencies.
-    ///
-    /// Parallelism info: This operation enables parallelism.
-    public native fun snapshot<IntElement>(aggregator: &Aggregator<IntElement>): AggregatorSnapshot<IntElement>;
-
-    /// Creates a snapshot of a given value.
-    /// Useful for when object is sometimes created via snapshot() or string_concat(), and sometimes directly.
-    public native fun create_snapshot<IntElement: copy + drop>(value: IntElement): AggregatorSnapshot<IntElement>;
-
-    /// Returns a value stored in this snapshot.
-    /// Note: This operation is resource-intensive, and reduces parallelism.
-    /// (Especially if called in a transaction that also modifies the aggregator,
-    /// or has other read/write conflicts)
-    ///
-    /// Parallelism info: This operation *prevents* speculative parallelism.
-    public native fun read_snapshot<IntElement>(snapshot: &AggregatorSnapshot<IntElement>): IntElement;
-
-    /// Returns a value stored in this DerivedStringSnapshot.
-    /// Note: This operation is resource-intensive, and reduces parallelism.
-    /// (Especially if called in a transaction that also modifies the aggregator,
-    /// or has other read/write conflicts)
-    ///
-    /// Parallelism info: This operation *prevents* speculative parallelism.
-    public native fun read_derived_string(snapshot: &DerivedStringSnapshot): String;
-
-    /// Creates a DerivedStringSnapshot of a given value.
-    /// Useful for when object is sometimes created via string_concat(), and sometimes directly.
-    public native fun create_derived_string(value: String): DerivedStringSnapshot;
-
-    /// Concatenates `before`, `snapshot` and `after` into a single string.
-    /// snapshot passed needs to have integer type - currently supported types are u64 and u128.
-    /// Raises EUNSUPPORTED_AGGREGATOR_SNAPSHOT_TYPE if called with another type.
-    /// If length of prefix and suffix together exceed 256 bytes, ECONCAT_STRING_LENGTH_TOO_LARGE is raised.
-    ///
-    /// Parallelism info: This operation enables parallelism.
-    public native fun derive_string_concat<IntElement>(before: String, snapshot: &AggregatorSnapshot<IntElement>, after: String): DerivedStringSnapshot;
-
-    // ===== DEPRECATE/NOT YET IMPLEMENTED ====
-
-    #[deprecated]
-    /// NOT YET IMPLEMENTED, always raises EAGGREGATOR_FUNCTION_NOT_YET_SUPPORTED.
-    public native fun copy_snapshot<IntElement: copy + drop>(snapshot: &AggregatorSnapshot<IntElement>): AggregatorSnapshot<IntElement>;
-
-    #[deprecated]
-    /// DEPRECATED, use derive_string_concat() instead. always raises EAGGREGATOR_FUNCTION_NOT_YET_SUPPORTED.
-    public native fun string_concat<IntElement>(before: String, snapshot: &AggregatorSnapshot<IntElement>, after: String): AggregatorSnapshot<String>;
-
-    // ========================================
-
-    #[test]
-    fun test_aggregator() {
-        let agg = create_aggregator(10);
-        assert!(try_add(&mut agg, 5), 1);
-        assert!(try_add(&mut agg, 5), 2);
-        assert!(read(&agg) == 10, 3);
-        assert!(!try_add(&mut agg, 5), 4);
-        assert!(read(&agg) == 10, 5);
-        assert!(try_sub(&mut agg, 5), 6);
-        assert!(read(&agg) == 5, 7);
-
-        let snap = snapshot(&agg);
-        assert!(try_add(&mut agg, 2), 8);
-        assert!(read(&agg) == 7, 9);
-        assert!(read_snapshot(&snap) == 5, 10);
-    }
-
-    #[test]
-    fun test_correct_read() {
-        let snapshot = create_snapshot(42);
-        assert!(read_snapshot(&snapshot) == 42, 0);
-
-        let derived = create_derived_string(std::string::utf8(b"42"));
-        assert!(read_derived_string(&derived) == std::string::utf8(b"42"), 0);
-    }
-
-    #[test]
-    #[expected_failure(abort_code = 0x030009, location = Self)]
-    fun test_copy_not_yet_supported() {
-        let snapshot = create_snapshot(42);
-        copy_snapshot(&snapshot);
-    }
-
-    #[test]
-    fun test_string_concat1() {
-        let snapshot = create_snapshot(42);
-        let derived = derive_string_concat(std::string::utf8(b"before"), &snapshot, std::string::utf8(b"after"));
-        assert!(read_derived_string(&derived) == std::string::utf8(b"before42after"), 0);
-    }
-
-    #[test]
-    #[expected_failure(abort_code = 0x030007, location = Self)]
-    fun test_aggregator_invalid_type1() {
-        create_unbounded_aggregator<u8>();
-    }
-
-    #[test]
-    fun test_aggregator_valid_type() {
-        create_unbounded_aggregator<u64>();
-        create_unbounded_aggregator<u128>();
-        create_aggregator<u64>(5);
-        create_aggregator<u128>(5);
-    }
-
-    #[test]
-    #[expected_failure(abort_code = 0x030005, location = Self)]
-    fun test_snpashot_invalid_type1() {
-        use std::option;
-        create_snapshot(option::some(42));
-    }
-
-    #[test]
-    #[expected_failure(abort_code = 0x030005, location = Self)]
-    fun test_snpashot_invalid_type2() {
-        create_snapshot(vector[42]);
-    }
-}