@annadata/capacitor-mqtt-quic 0.2.2 → 0.2.4

package/android/install/ngtcp2-android/x86_64/share/doc/ngtcp2/README.rst

@@ -1,385 +0,0 @@
-ngtcp2
-======
-
-"Call it TCP/2.  One More Time."
-
-ngtcp2 project is an effort to implement `RFC9000
-<https://datatracker.ietf.org/doc/html/rfc9000>`_ QUIC protocol.
-
-Documentation
--------------
-
-`Online documentation <https://nghttp2.org/ngtcp2/>`_ is available.
-
-Public test server
-------------------
-
-The following endpoints are available to try out ngtcp2
-implementation:
-
-- https://nghttp2.org:4433
-- https://nghttp2.org:4434 (requires address validation token)
-- https://nghttp2.org (powered by `nghttpx
-  <https://nghttp2.org/documentation/nghttpx.1.html>`_)
-
-  This endpoints sends Alt-Svc header field to clients if it is
-  accessed via HTTP/1.1 or HTTP/2 to tell them that HTTP/3 is
-  available at UDP 443.
-
-Requirements
-------------
-
-The libngtcp2 C library itself does not depend on any external
-libraries.  The example client, and server are written in C++20, and
-should compile with the modern C++ compilers (e.g., clang >= 11.0, or
-gcc >= 11.0).
-
-The following packages are required to configure the build system:
-
-- pkg-config >= 0.20
-- autoconf
-- automake
-- autotools-dev
-- libtool
-
-To build sources under the examples directory, libev and nghttp3 are
-required:
-
-- libev
-- `nghttp3 <https://github.com/ngtcp2/nghttp3>`_ for HTTP/3
-
-To enable `TLS Certificate Compression
-<https://datatracker.ietf.org/doc/html/rfc8879>`_ in bsslclient and
-bsslserver (BoringSSL (aws-lc) examples client and server), the
-following library is required:
-
-- libbrotli-dev >= 1.0.9
-
-ngtcp2 crypto helper library, and client and server under examples
-directory require at least one of the following TLS backends:
-
-- `quictls
-  <https://github.com/quictls/openssl/tree/OpenSSL_1_1_1w+quic>`_
-- GnuTLS >= 3.7.5
-- BoringSSL (commit 52975ff6ea9fb076e53025b82f2e80a23b027a5c);
-  or aws-lc >= 1.39.0
-- Picotls (commit 34d4d6496cec80bc3b56dbdab45f21bd9fbc17aa)
-- wolfSSL >= 5.5.0
-- LibreSSL >= v3.9.2
-- OpenSSL >= 3.5.0 (experimental)
-
-Before building from git
-------------------------
-
-When build from git, run the following command to pull submodules:
-
-.. code-block:: shell
-
-   $ git submodule update --init
-
-Build with wolfSSL
-------------------
-
-.. code-block:: shell
-
-   $ git clone --depth 1 -b v5.8.4-stable https://github.com/wolfSSL/wolfssl
-   $ cd wolfssl
-   $ autoreconf -i
-   $ # For wolfSSL < v5.6.6, append --enable-quic.
-   $ ./configure --prefix=$PWD/build \
-       --enable-all --enable-aesni --enable-harden --enable-keylog-export \
-       --disable-ech --enable-mlkem
-   $ make -j$(nproc)
-   $ make install
-   $ cd ..
-   $ git clone --recursive https://github.com/ngtcp2/nghttp3
-   $ cd nghttp3
-   $ autoreconf -i
-   $ ./configure --prefix=$PWD/build --enable-lib-only
-   $ make -j$(nproc) check
-   $ make install
-   $ cd ..
-   $ git clone --recursive https://github.com/ngtcp2/ngtcp2
-   $ cd ngtcp2
-   $ autoreconf -i
-   $ # For Mac users who have installed libev with MacPorts, append
-   $ # LIBEV_CFLAGS="-I/opt/local/include" LIBEV_LIBS="-L/opt/local/lib -lev"
-   $ ./configure PKG_CONFIG_PATH=$PWD/../wolfssl/build/lib/pkgconfig:$PWD/../nghttp3/build/lib/pkgconfig \
-       --with-wolfssl
-   $ make -j$(nproc) check
-
-Build with BoringSSL
---------------------
-
-.. code-block:: shell
-
-   $ git clone https://boringssl.googlesource.com/boringssl
-   $ cd boringssl
-   $ git checkout 52975ff6ea9fb076e53025b82f2e80a23b027a5c
-   $ cmake -B build -DCMAKE_POSITION_INDEPENDENT_CODE=ON
-   $ make -j$(nproc) -C build
-   $ cd ..
-   $ git clone --recursive https://github.com/ngtcp2/nghttp3
-   $ cd nghttp3
-   $ autoreconf -i
-   $ ./configure --prefix=$PWD/build --enable-lib-only
-   $ make -j$(nproc) check
-   $ make install
-   $ cd ..
-   $ git clone --recursive  https://github.com/ngtcp2/ngtcp2
-   $ cd ngtcp2
-   $ autoreconf -i
-   $ # For Mac users who have installed libev with MacPorts, append
-   $ # LIBEV_CFLAGS="-I/opt/local/include" LIBEV_LIBS="-L/opt/local/lib -lev"
-   $ ./configure PKG_CONFIG_PATH=$PWD/../nghttp3/build/lib/pkgconfig \
-       BORINGSSL_LIBS="-L$PWD/../boringssl/build -lssl -lcrypto" \
-       BORINGSSL_CFLAGS="-I$PWD/../boringssl/include" \
-       --with-boringssl
-   $ make -j$(nproc) check
-
-Build with aws-lc
------------------
-
-.. code-block:: shell
-
-   $ git clone --depth 1 -b v1.66.2 https://github.com/aws/aws-lc
-   $ cd aws-lc
-   $ cmake -B build -DDISABLE_GO=ON
-   $ make -j$(nproc) -C build
-   $ cd ..
-   $ git clone --recursive https://github.com/ngtcp2/nghttp3
-   $ cd nghttp3
-   $ autoreconf -i
-   $ ./configure --prefix=$PWD/build --enable-lib-only
-   $ make -j$(nproc) check
-   $ make install
-   $ cd ..
-   $ git clone --recursive  https://github.com/ngtcp2/ngtcp2
-   $ cd ngtcp2
-   $ autoreconf -i
-   $ # For Mac users who have installed libev with MacPorts, append
-   $ # LIBEV_CFLAGS="-I/opt/local/include" LIBEV_LIBS="-L/opt/local/lib -lev"
-   $ ./configure PKG_CONFIG_PATH=$PWD/../nghttp3/build/lib/pkgconfig \
-       BORINGSSL_CFLAGS="-I$PWD/../aws-lc/include" \
-       BORINGSSL_LIBS="-L$PWD/../aws-lc/build/ssl -lssl -L$PWD/../aws-lc/build/crypto -lcrypto" \
-       --with-boringssl
-   $ make -j$(nproc) check
-
-Build with libressl
------------------
-
-.. code-block:: shell
-
-   $ LIBRESSL_VERSION=v4.2.1
-   $ git clone --depth 1 -b $LIBRESSL_VERSION https://github.com/libressl/portable.git libressl
-   $ cd libressl
-   $ # Workaround autogen.sh failure
-   $ export LIBRESSL_GIT_OPTIONS="-b libressl-$LIBRESSL_VERSION"
-   $ ./autogen.sh
-   $ ./configure --prefix=$PWD/build
-   $ make -j$(nproc) install
-   $ cd ..
-   $ git clone --recursive https://github.com/ngtcp2/nghttp3
-   $ cd nghttp3
-   $ autoreconf -i
-   $ ./configure --prefix=$PWD/build --enable-lib-only
-   $ make -j$(nproc) check
-   $ make install
-   $ cd ..
-   $ git clone --recursive  https://github.com/ngtcp2/ngtcp2
-   $ cd ngtcp2
-   $ autoreconf -i
-   $ # For Mac users who have installed libev with MacPorts, append
-   $ # LIBEV_CFLAGS="-I/opt/homebrew/Cellar/libev/4.33/include" LIBEV_LIBS="-L/opt/homebrew/Cellar/libev/4.33/lib -lev"
-   $ ./configure PKG_CONFIG_PATH=$PWD/../nghttp3/build/lib/pkgconfig:$PWD/../libressl/build/lib/pkgconfig
-   $ make -j$(nproc) check
-
-Client/Server
--------------
-
-After successful build, the client and server executable should be
-found under examples directory.  They talk HTTP/3.
-
-Client
-~~~~~~
-
-.. code-block:: shell
-
-   $ examples/wsslclient [OPTIONS] <HOST> <PORT> [<URI>...]
-
-The notable options are:
-
-- ``-d``, ``--data=<PATH>``: Read data from <PATH> and send it to a
-  peer.
-
-Server
-~~~~~~
-
-.. code-block:: shell
-
-   $ examples/wsslserver [OPTIONS] <ADDR> <PORT> <PRIVATE_KEY_FILE> <CERTIFICATE_FILE>
-
-The notable options are:
-
-- ``-V``, ``--validate-addr``: Enforce stateless address validation.
-
-H09wsslclient/H09wsslserver
----------------------------
-
-There are h09wsslclient and h09wsslserver which speak HTTP/0.9.  They
-are written just for `quic-interop-runner
-<https://github.com/marten-seemann/quic-interop-runner>`_.  They share
-the basic functionalities with HTTP/3 client and server but have less
-functions (e.g., h09wsslclient does not have a capability to send
-request body, and h09wsslserver does not understand numeric request
-path, like /1000).
-
-Resumption and 0-RTT
---------------------
-
-In order to resume a session, a session ticket, and a transport
-parameters must be fetched from server.  First, run
-examples/wsslclient with --session-file, and --tp-file options which
-specify a path to session ticket, and transport parameter files
-respectively to save them locally.
-
-Once these files are available, run examples/wsslclient with the same
-arguments again.  You will see that session is resumed in your log if
-resumption succeeds.  Resuming session makes server's first Handshake
-packet pretty small because it does not send its certificates.
-
-To send 0-RTT data, after making sure that resumption works, use -d
-option to specify a file which contains data to send.
-
-Token (Not something included in Retry packet)
-----------------------------------------------
-
-QUIC server might send a token to client after connection has been
-established.  Client can send this token in subsequent connection to
-the server.  Server verifies the token and if it succeeds, the address
-validation completes and lifts some restrictions on server which might
-speed up transfer.  In order to save and/or load a token,
-use --token-file option of examples/wsslclient.  The given file is
-overwritten if it already exists when storing a token.
-
-Crypto helper library
----------------------
-
-In order to make TLS stack integration less painful, we provide a
-crypto helper library which offers the basic crypto operations.
-
-The header file exists under crypto/includes/ngtcp2 directory.
-
-Each library file is built for a particular TLS backend.  The
-available crypto helper libraries are:
-
-- libngtcp2_crypto_quictls: Use quictls as TLS backend
-- libngtcp2_crypto_libressl: Use libressl as TLS backend
-- libngtcp2_crypto_gnutls: Use GnuTLS as TLS backend
-- libngtcp2_crypto_boringssl: Use BoringSSL and aws-lc as TLS backend
-- libngtcp2_crypto_picotls: Use Picotls as TLS backend
-- libngtcp2_crypto_wolfssl: Use wolfSSL as TLS backend
-- libngtcp2_crypto_ossl: Use OpenSSL as TLS backend (experimental)
-
-Because BoringSSL and Picotls are an unversioned product, we only
-tested their particular revision.  See Requirements section above.
-
-We use Picotls with OpenSSL as crypto backend.
-
-libngtcp2_crypto_ossl has some restrictions for its use because
-OpenSSL QUIC TLS API requires us to keep crypto data in tact until it
-says that they are no longer used.  It also requires us to keep
-transport parameter buffer.  This extra book keeping is just done for
-a couple of TLS messages exchanged during handshake and a couple of
-session tickets after handshake.  If you absolutely need to use
-OpenSSL backend, your application must make sure that:
-
-- Keep `ngtcp2_conn` alive until ``SSL`` object is freed by
-  ``SSL_free``; or
-- Call ``SSL_set_app_data(ssl, NULL)`` before calling ``SSL_free``
-
-If you cannot make sure neither of them, it is a good time to migrate
-your application to the other alternative (e.g., wolfSSL, aws-lc).
-
-libngtcp2_crypto_quictls, libngtcp2_crypto_libressl and
-libngtcp2_crypto_ossl cannot be built at the same time.
-
-Although libressl has its own library libngtcp2_crypto_libressl, an
-application should include `ngtcp2/ngtcp2_crypto_quictls.h`.  There is
-no `ngtcp2/ngtcp2_crypto_libressl.h`.
-
-The examples directory contains client and server that are linked to
-those crypto helper libraries and TLS backends.  They are only built
-if their corresponding crypto helper library is built:
-
-- qtlsclient: quictls(libressl) client
-- qtlsserver: quictls(libressl) server
-- gtlsclient: GnuTLS client
-- gtlsserver: GnuTLS server
-- bsslclient: BoringSSL(aws-lc) client
-- bsslserver: BoringSSL(aws-lc) server
-- ptlsclient: Picotls client
-- ptlsserver: Picotls server
-- wsslclient: wolfSSL client
-- wsslserver: wolfSSL server
-- osslclient: OpenSSL client
-- osslserver: OpenSSL server
-
-QUIC protocol extensions
--------------------------
-
-The library implements the following QUIC protocol extensions:
-
-- `An Unreliable Datagram Extension to QUIC
-  <https://datatracker.ietf.org/doc/html/rfc9221>`_
-- `Greasing the QUIC Bit
-  <https://datatracker.ietf.org/doc/html/rfc9287>`_
-- `Compatible Version Negotiation for QUIC
-  <https://datatracker.ietf.org/doc/html/rfc9368>`_
-- `QUIC Version 2
-  <https://datatracker.ietf.org/doc/html/rfc9369>`_
-
-Configuring Wireshark for QUIC
-------------------------------
-
-`Wireshark <https://www.wireshark.org/download.html>`_ can be configured to
-analyze QUIC traffic using the following steps:
-
-1. Set *SSLKEYLOGFILE* environment variable:
-
-   .. code-block:: shell
-
-      $ export SSLKEYLOGFILE=quic_keylog_file
-
-2. Set the port that QUIC uses
-
-   Go to *Preferences->Protocols->QUIC* and set the port the program
-   listens to.  In the case of the example application this would be
-   the port specified on the command line.
-
-3. Set Pre-Master-Secret logfile
-
-   Go to *Preferences->Protocols->TLS* and set the *Pre-Master-Secret
-   log file* to the same value that was specified for *SSLKEYLOGFILE*.
-
-4. Choose the correct network interface for capturing
-
-   Make sure you choose the correct network interface for
-   capturing. For example, if using localhost choose the *loopback*
-   network interface on macos.
-
-5. Create a filter
-
-   Create A filter for the udp.port and set the port to the port the
-   application is listening to. For example:
-
-   .. code-block:: text
-
-      udp.port == 7777
-
-License
--------
-
-The MIT License
-
-Copyright (c) 2016 ngtcp2 contributors

package/android/install/wolfssl-android/arm64-v8a/bin/wolfssl-config

@@ -1,117 +0,0 @@
-#! /bin/sh
- 
-package="wolfssl"
-version="5.8.4"
-libs="-lwolfssl"
- 
-prefix="/Users/annadata/Ionic/capacitor-mqtt-quic/android/install/wolfssl-android/arm64-v8a"
-exec_prefix="${prefix}"
-bindir="${exec_prefix}/bin"
-sbindir="${exec_prefix}/sbin"
-libexecdir="${exec_prefix}/libexec"
-datadir="${datarootdir}"
-sysconfdir="${prefix}/etc"
-sharedstatedir="${prefix}/com"
-localstatedir="${prefix}/var"
-libdir="${exec_prefix}/lib"
-infodir="${datarootdir}/info"
-mandir="${datarootdir}/man"
-includedir="${prefix}/include"
-target="aarch64-unknown-linux-android"
-host="aarch64-unknown-linux-android"
-build="aarch64-apple-darwin25.2.0"
- 
-if test "$#" -eq 0; then
-   cat <<EOF
-Usage: $package-config OPTIONS
-Options:
-  --prefix=DIR) : \$prefix
-  --package) : \$package
-  --version) : \$version
-  --cflags) : -I\$includedir
-  --libs) : -L\$libdir -l\$package
-  --help) print all the options (not just these)
-EOF
-fi
- 
-o=""
-h=""
-for i in "$@"; do
-  case $i in
-  --prefix=*) prefix=`echo $i | sed -e "s/--prefix=//"` ;;
-  --prefix)    o="$o $prefix" ;;
-  --package)   o="$o $package" ;;
-  --version)   o="$o $version" ;;
-  --cflags) if test "_$includedir" != "_/usr/include"
-          then o="$o -I$includedir" ; fi
-  ;;
-  --libs)      o="$o -L$libdir $libs" ;;
-  --exec_prefix|--eprefix) o="$o $exec_prefix" ;;
-  --bindir)                o="$o $bindir" ;;
-  --sbindir)               o="$o $sbindir" ;;
-  --libexecdir)            o="$o $libexecdir" ;;
-  --datadir)               o="$o $datadir" ;;
-  --datainc)               o="$o -I$datadir" ;;
-  --datalib)               o="$o -L$datadir" ;;
-  --sysconfdir)            o="$o $sysconfdir" ;;
-  --sharedstatedir)        o="$o $sharedstatedir" ;;
-  --localstatedir)         o="$o $localstatedir" ;;
-  --libdir)                o="$o $libdir" ;;
-  --libadd)                o="$o -L$libdir" ;;
-  --infodir)               o="$o $infodir" ;;
-  --mandir)                o="$o $mandir" ;;
-  --target)                o="$o $target" ;;
-  --host)                  o="$o $host" ;;
-  --build)                 o="$o $build" ;;
-  --data)                  o="$o -I$datadir/$package" ;;
-  --pkgdatadir)            o="$o $datadir/$package" ;;
-  --pkgdatainc)            o="$o -I$datadir/$package" ;;
-  --pkgdatalib)            o="$o -L$datadir/$package" ;;
-  --pkglibdir)             o="$o $libdir/$package" ;;
-  --pkglibinc)             o="$o -I$libinc/$package" ;;
-  --pkglibadd)             o="$o -L$libadd/$package" ;;
-  --pkgincludedir)         o="$o $includedir/$package" ;;
-  --help) h="1" ;;
-  -?//*|-?/*//*|-?./*//*|//*|/*//*|./*//*) 
-       v=`echo $i | sed -e s://:\$:g`
-       v=`eval "echo $v"` 
-       o="$o $v" ;; 
-  esac
-done
- 
-o=`eval "echo $o"`
-o=`eval "echo $o"`
-eval "echo $o"
- 
-if test ! -z "$h" ; then 
-cat <<EOF
-  --prefix=xxx)      (what is that for anyway?)
-  --prefix)         \$prefix        $prefix
-  --package)        \$package       $package
-  --version)        \$version       $version
-  --cflags)         -I\$includedir    unless it is /usr/include
-  --libs)           -L\$libdir -l\$PACKAGE \$LIBS
-  --exec_prefix) or... 
-  --eprefix)        \$exec_prefix   $exec_prefix
-  --bindir)         \$bindir        $bindir
-  --sbindir)        \$sbindir       $sbindir
-  --libexecdir)     \$libexecdir    $libexecdir
-  --datadir)        \$datadir       $datadir
-  --sysconfdir)     \$sysconfdir    $sysconfdir
-  --sharedstatedir) \$sharedstatedir$sharedstatedir
-  --localstatedir)  \$localstatedir $localstatedir
-  --libdir)         \$libdir        $libdir
-  --infodir)        \$infodir       $infodir
-  --mandir)         \$mandir        $mandir
-  --target)         \$target        $target
-  --host)           \$host          $host
-  --build)          \$build         $build
-  --data)           -I\$datadir/\$package
-  --pkgdatadir)     \$datadir/\$package
-  --pkglibdir)      \$libdir/\$package
-  --pkgincludedir)  \$includedir/\$package
-  --help)           generated by ax_create_generic_config.m4
-  -I//varname and other inc-targets like --pkgdatainc supported
-  -L//varname and other lib-targets, e.g. --pkgdatalib or --libadd
-EOF
-fi

package/android/install/wolfssl-android/arm64-v8a/include/wolfssl/callbacks.h

@@ -1,93 +0,0 @@
-/* callbacks.h
- *
- * Copyright (C) 2006-2025 wolfSSL Inc.
- *
- * This file is part of wolfSSL.
- *
- * wolfSSL is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * wolfSSL is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
- */
-
-
-
-#ifndef WOLFSSL_CALLBACKS_H
-#define WOLFSSL_CALLBACKS_H
-
-#include <wolfssl/wolfcrypt/wc_port.h>
-
-#ifdef __cplusplus
-    extern "C" {
-#endif
-
-
-enum { /* CALLBACK CONSTANTS */
-    MAX_PACKETNAME_SZ     =  24,
-    MAX_CIPHERNAME_SZ     =  24,
-    MAX_TIMEOUT_NAME_SZ   =  24,
-    MAX_PACKETS_HANDSHAKE =  14,       /* 12 for client auth plus 2 alerts */
-    MAX_VALUE_SZ          = 128        /* all handshake packets but Cert should
-                                          fit here  */
-};
-
-struct WOLFSSL;
-
-typedef struct handShakeInfo_st {
-    struct WOLFSSL* ssl;
-    char   cipherName[MAX_CIPHERNAME_SZ + 1];    /* negotiated cipher */
-    char   packetNames[MAX_PACKETS_HANDSHAKE][MAX_PACKETNAME_SZ + 1];
-                                                 /* SSL packet names  */
-    int    numberPackets;                        /* actual # of packets */
-    int    negotiationError;                     /* cipher/parameter err */
-} HandShakeInfo;
-
-
-#if defined(HAVE_SYS_TIME_H) && !defined(NO_TIMEVAL)
-    typedef struct timeval WOLFSSL_TIMEVAL;
-#else /* HAVE_SYS_TIME_H */
-    /* Define the timeval explicitly. */
-    typedef struct {
-        long tv_sec;  /* Seconds. */
-        long tv_usec; /* Microseconds. */
-    } WOLFSSL_TIMEVAL;
-#endif /* HAVE_SYS_TIME_H */
-#if !defined(NO_OLD_TIMEVAL_NAME)
-    #define Timeval WOLFSSL_TIMEVAL
-#endif
-
-typedef struct packetInfo_st {
-    char           packetName[MAX_PACKETNAME_SZ + 1]; /* SSL packet name */
-    WOLFSSL_TIMEVAL timestamp;                       /* when it occurred    */
-    unsigned char  value[MAX_VALUE_SZ];             /* if fits, it's here */
-    unsigned char* bufferValue;                     /* otherwise here (non 0) */
-    int            valueSz;                         /* sz of value or buffer */
-} PacketInfo;
-
-
-typedef struct timeoutInfo_st {
-    char       timeoutName[MAX_TIMEOUT_NAME_SZ + 1]; /* timeout Name */
-    int        flags;                              /* for future use */
-    int        numberPackets;                      /* actual # of packets */
-    PacketInfo packets[MAX_PACKETS_HANDSHAKE];     /* list of all packets  */
-    WOLFSSL_TIMEVAL timeoutValue;                  /* timer that caused it */
-} TimeoutInfo;
-
-
-
-#ifdef __cplusplus
-    }  /* extern "C" */
-#endif
-
-
-#endif /* WOLFSSL_CALLBACKS_H */
-