@amsterdamdatalabs/adl-agent-control-linux-x64 0.1.46 → 0.1.47

package/packages/repo-controls/package/adl-compliance/src/adl_compliance/checks/pipeline/phase_disjoint/test_check.py

@@ -1,109 +0,0 @@
-"""PIP-004 — ported from
-`compliance_new/checks/pipeline/phase-disjoint/test.sh`.
-
-Same three named corpora as the shell fixtures, ported byte-for-byte
-(`overlapping`, `disjoint`, `empty`), minus the `policy/` wrapper directory
-the shell version needed to reassemble a whole package around the copied
-gate script — the Python check reads its named input directly, so the
-committed fixture is just the one document each case is about.
-
-This wave's checks are wired into `checks/__init__.py` in a later, single
-pass, so `PhaseDisjoint` is not yet registered under `checks.lookup`. Rather
-than call `runner.run()` — which would resolve `PIP-004` to "no check
-implements it" and report `COULD_NOT_RUN` for the wrong reason, a
-coincidental pass — `run_check` below builds the `Context` directly (with the
-one named input this gate declares) and drives the check the same way
-`runner.run` would, so the real row (`policy/gate-registry.yaml`'s `PIP-004`)
-and the real check class are exercised without depending on the registry
-wiring. This is the same bypass `contracts.transport-boundaries`'s test uses
-for an unwired, entirely-structural gate.
-
-The shell `test.sh` also asserts two cases this port does not reproduce:
-
-* "no set given is could-not-run" — a scope guard `check.sh` itself enforced
-  by hand (`ADL_CHANGED_FILES` unset). Here scope resolution belongs to
-  `runner.run`/the CLI, never to a check (K-29..K-31), and this gate reads no
-  member of the given file set at all (`graded` is unimplemented), so there
-  is no equivalent guard inside `PhaseDisjoint` for a test to exercise.
-* the exact registry source LINE each finding points at (`yq '.id | line'`).
-  `yaml.safe_load` does not carry line numbers back into the parsed model,
-  and no other YAML-register gate ported so far (`layout.directory-ratchet`,
-  `contracts.transport-boundaries`) attaches one either; this port follows
-  that precedent and reports the registry's path without a line.
-
-See `check.py`'s docstring for why neither the currently shipped shell
-registry nor this package's own carries a single row with `phases:` today —
-the scheduling model MET-001 grades was already retired in favour of
-`engine.scope`-based triggering before this row was ported. Ported here
-faithfully anyway, against the same three corpora `check.sh` was proven
-against.
-"""
-
-from __future__ import annotations
-
-import pathlib
-
-from adl_compliance.checks.pipeline.phase_disjoint import PhaseDisjoint
-from adl_compliance.core.context import Context, FileSet
-from adl_compliance.core.errors import CouldNotRun
-from adl_compliance.core.verdict import Outcome, Verdict, could_not_run, decide
-from adl_compliance.policy.registry import load
-
-FIXTURES = pathlib.Path(__file__).parent / "fixtures"
-OVERLAPPING = FIXTURES / "overlapping" / "gate-registry.yaml"
-DISJOINT = FIXTURES / "disjoint" / "gate-registry.yaml"
-EMPTY = FIXTURES / "empty" / "gate-registry.yaml"
-NOT_COMMITTED = FIXTURES / "gone.yaml"
-
-ROW = load().by_id("PIP-004")
-
-
-def run_check(registry: pathlib.Path) -> Verdict:
-    """`runner.run`'s grade-then-decide, against this check directly — the
-    same bypass `contracts.transport-boundaries`'s test uses for an unwired
-    check."""
-    ctx = Context(root=FIXTURES, row=ROW, inputs={"registry": registry})
-    try:
-        findings = tuple(PhaseDisjoint().run(ctx, FileSet()))
-    except CouldNotRun as exc:
-        return could_not_run(ROW, str(exc))
-    return decide(ROW, findings, 0, ())
-
-
-# ------------------------------------------------------------- both overlaps
-
-def test_both_overlaps_are_reported_and_the_clean_row_is_not() -> None:
-    verdict = run_check(OVERLAPPING)
-    assert verdict.outcome is Outcome.FINDINGS, verdict.render()
-    assert verdict.rules == ["MET-001", "MET-001"]
-
-    messages = [f.message for f in verdict.findings]
-    assert any("BAD-01 runs at both pre-commit and pre-push" in m for m in messages)
-    assert any("BAD-02 runs at both pr_validation and qua_deploy" in m for m in messages)
-    assert not any("OK-01" in m for m in messages)
-
-
-# --------------------------------------------------------- every row disjoint
-
-def test_a_disjoint_registry_reports_nothing() -> None:
-    verdict = run_check(DISJOINT)
-    assert verdict.outcome is Outcome.CLEAN, verdict.render()
-    assert verdict.findings == ()
-
-
-# ------------------------------------------------- zero rows is could-not-run
-
-def test_a_registry_that_decodes_to_zero_rows_is_could_not_run() -> None:
-    """A decode that yields nothing must not read as a clean estate — the
-    assertion that separates "every row passed" from "the gate read nothing"."""
-    verdict = run_check(EMPTY)
-    assert verdict.outcome is Outcome.COULD_NOT_RUN, verdict.render()
-    assert "decoded zero rows" in verdict.message
-
-
-# --------------------------------------------------------- a missing registry
-
-def test_a_missing_registry_is_could_not_run_not_a_pass() -> None:
-    verdict = run_check(NOT_COMMITTED)
-    assert verdict.outcome is Outcome.COULD_NOT_RUN, verdict.render()
-    assert "missing input" in verdict.message

package/packages/repo-controls/package/adl-compliance/src/adl_compliance/checks/release/__init__.py

@@ -1 +0,0 @@
-"""release."""

package/packages/repo-controls/package/adl-compliance/src/adl_compliance/checks/release/changeset_plan/__init__.py

@@ -1,11 +0,0 @@
-"""The `release.changeset-plan` gate.
-
-A folder rather than a module because this gate's fixture corpora — a clean
-one and a release-relevant one — belong beside the check that reads them.
-"""
-
-from __future__ import annotations
-
-from .check import ChangesetPlan
-
-__all__ = ["ChangesetPlan"]

package/packages/repo-controls/package/adl-compliance/src/adl_compliance/checks/release/changeset_plan/check.py

@@ -1,149 +0,0 @@
-"""REL-001 — ported from
-`compliance_new/checks/release/changeset-plan/check.sh`.
-
-Entirely `graded`: the rule is "does the given set contain a release-relevant
-path", and there is no named path this gate probes unconditionally — an empty
-or irrelevant set is a silent pass, exactly as the shell script's own
-`needs_changeset` guard makes it.
-
-**The shell script's own case list, carried over untranslated.** `check.sh`'s
-`case "$path" in .workflows/changesets/package.json | ... | .changeset/*)`
-matches with bash's `case` pattern semantics, where `*` matches any string
-INCLUDING one containing `/` (case patterns are not restricted to filesystem
-pathname semantics the way `for f in *` is). `.changeset/*` therefore matches
-`.changeset/plan.md` and `.changeset/nested/plan.md` alike — the same reach as
-the registry row's own `.changeset/**` scope entry, not a narrower one.
-`fnmatch.fnmatchcase` has the identical property (a straight `*` -> `.*` regex
-translation, no path-separator special-casing) and, unlike plain `fnmatch`,
-no host-dependent case folding either, so it reproduces the shell patterns
-verbatim rather than approximating them with a hand-rolled prefix test.
-
-**Linear, not accumulating**, like the shell version: `fail()` there reports
-one finding and exits immediately, so at most one REL-001 finding ever comes
-out of a single run. Each branch below yields once and returns.
-
-**The jq-optional schema check does not survive.** `check.sh` skips its
-"changeset status output is not a JSON object" check entirely when `jq` is not
-on the host (`echo "... jq not installed for schema check"; exit 0`) — jq was
-an EXTERNAL tool the shell script had no other way to parse JSON with. This
-port has `json.loads` unconditionally, so the schema check always runs; there
-is no equivalent "jq missing" skip because there is nothing here that can be
-missing. This is a deliberate behavioural difference, not an oversight: it
-makes the gate strictly stricter (it now catches a malformed JSON object on
-every host, not only the ones with jq installed), never looser.
-
-**`release/changeset-tooling.sh` is not a registered tree.** It is invoked as
-a literal repository-relative path, exactly as `check.sh` invoked it — never
-through a `<tree>` placeholder, because no `release` entry exists in
-`policy/trees.toml` (K-42 governs a NAMED tree; this is one specific script
-this one gate drives, declared as a plain `inputs` path like any other
-consumer-owned file). Declared via `requires = ("bash",)` because that is the
-interpreter the shell tool was always invoked through and is exactly what
-`Check.requires` exists to verify before this code runs at all.
-
-**A real limit, inherited rather than introduced.** `release/` does not exist
-in this checkout (nor, per `git log`, has it ever been committed at any
-reachable ref), so the "changeset status succeeded and its JSON was graded"
-branch has never been exercised by anything this port can run — the shell
-test's own docstring says the same thing about its own fixture. This port
-proves exactly what the shell test proved: a release-relevant path in the
-given set reaches the tool invocation, and the tool's failure becomes a
-REL-001 finding rather than a crash or a silent pass.
-"""
-
-from __future__ import annotations
-
-import fnmatch
-import json
-import subprocess
-import tempfile
-from collections.abc import Iterable
-from pathlib import Path
-from typing import ClassVar
-
-from ....core.check import Check
-from ....core.context import Context, FileSet
-from ....core.finding import Report
-
-
-class ChangesetPlan(Check):
-    id: ClassVar[str] = "REL-001"
-    rule: ClassVar[str] = "REL-001"
-    requires: ClassVar[tuple[str, ...]] = ("bash",)
-
-    # check.sh's own `case "$path" in ...)` alternatives. `VERSION`,
-    # `CHANGELOG.md`, and `.changeset/*` are root-relative subject matter the
-    # gate owns outright, never a consumer's tree choice; the two
-    # `.workflows`-rooted ones are fixed 2026-09-15 (K-42 sweep) — they used
-    # to be hardcoded literals FILTERING the given set (`_is_release_relevant`
-    # below), so a repository declaring `workflows` away from its packaged
-    # default had every real release-relevant change silently excluded and
-    # this gate went quiet over content it never read — the CON-002 shape.
-    ROOT_RELEVANT: ClassVar[tuple[str, ...]] = ("VERSION", "CHANGELOG.md", ".changeset/*")
-
-    inputs: ClassVar[dict[str, str]] = {
-        # A literal repository-relative path, not a `<tree>` placeholder: no
-        # `release` tree is registered in `policy/trees.toml`, and this is the
-        # one script this one gate drives, not a named consumer tree.
-        "changeset_tool": "release/changeset-tooling.sh",
-        "workflows_package": "<workflows>/package.json",
-        "changesets_package": "<workflows>/changesets/package.json",
-        "changesets_lock": "<workflows>/changesets/bun.lock",
-    }
-
-    def graded(self, ctx: Context, files: FileSet) -> Iterable[Report]:
-        release_relevant = self.ROOT_RELEVANT + (
-            ctx.relative(ctx.inputs["workflows_package"]),
-            ctx.relative(ctx.inputs["changesets_package"]),
-            ctx.relative(ctx.inputs["changesets_lock"]),
-        )
-        if not any(self._is_release_relevant(path, release_relevant) for path in files):
-            return
-
-        with tempfile.TemporaryDirectory(prefix="changeset-status.") as work:
-            status_file = Path(work) / "status.json"
-            completed = subprocess.run(
-                (
-                    "bash", str(ctx.inputs["changeset_tool"]),
-                    "changeset", "status", "--output", str(status_file),
-                ),
-                cwd=ctx.root, capture_output=True, text=True, check=False,
-            )
-            if completed.returncode != 0:
-                yield self.report(
-                    ".changeset",
-                    "changeset status could not be computed for a release-relevant change",
-                    "add a .changeset/*.md plan for the release-relevant change, or fix "
-                    "the failing 'release/changeset-tooling.sh changeset status' invocation",
-                )
-                return
-
-            if not status_file.is_file():
-                yield self.report(
-                    ".changeset",
-                    "changeset status did not write its output file",
-                    "investigate why 'release/changeset-tooling.sh changeset status "
-                    "--output <file>' did not create the file",
-                )
-                return
-
-            body = status_file.read_text(encoding="utf-8", errors="replace")
-            try:
-                parsed = json.loads(body)
-            except json.JSONDecodeError:
-                parsed = None
-            if not isinstance(parsed, dict):
-                yield self.report(
-                    "release/changeset-tooling.sh",
-                    "changeset status output is not a JSON object",
-                    "fix release/changeset-tooling.sh's 'changeset status --output' to "
-                    "emit a JSON object",
-                )
-
-    @staticmethod
-    def _is_release_relevant(path: str, patterns: tuple[str, ...]) -> bool:
-        # `fnmatchcase`, not `fnmatch`: the shell `case` statement this ports
-        # is byte-for-byte case-sensitive, and plain `fnmatch` normalises case
-        # through `os.path.normcase` — a no-op on POSIX but not on Windows, so
-        # this would silently diverge from the shell semantics on that host.
-        return any(fnmatch.fnmatchcase(path, pattern) for pattern in patterns)

package/packages/repo-controls/package/adl-compliance/src/adl_compliance/checks/release/changeset_plan/fixtures/clean/docs/readme.md

@@ -1,4 +0,0 @@
-# fixture
-
-A file that is not release-relevant by check-changeset-plan.sh's own case list.
-Its presence in the given set must not trigger a changeset-status check.

package/packages/repo-controls/package/adl-compliance/src/adl_compliance/checks/release/changeset_plan/fixtures/relevant/VERSION

@@ -1 +0,0 @@
-0.0.1

package/packages/repo-controls/package/adl-compliance/src/adl_compliance/checks/release/changeset_plan/test_check.py

@@ -1,151 +0,0 @@
-"""REL-001 — ported from
-`compliance_new/checks/release/changeset-plan/test.sh`.
-
-Two committed fixtures, copied byte-for-byte from the shell tree's corpora:
-`fixtures/clean/docs/readme.md` (no release-relevant path) and
-`fixtures/relevant/VERSION` (release-relevant, and the corpus deliberately
-carries no `release/` tree so `bash release/changeset-tooling.sh` fails for
-the same reason every time — see `check.py`'s module docstring for why that
-is this gate's real, inherited limit as a fixture subject, not a gap this port
-introduced).
-
-This check is intentionally NOT wired into `checks/__init__.py` yet (a
-separate step wires this whole wave's checks into the registry in one shot),
-so these tests call `ChangesetPlan.graded` directly against a hand-built
-`Context`/`FileSet` — the same bypass `docs/markdown_ast/test_check.py` and
-`pipeline/parser_tool_range/test_check.py` use for an unwired check, not a
-shortcut around row-scope narrowing.
-
-`test.sh`'s three cases map onto the three tests below exactly: a set with no
-release-relevant path exits 0 and reports nothing; a set naming `VERSION`
-reaches the tool invocation and turns its failure into exactly one REL-001
-finding on `.changeset`; an empty set grades nothing at all.
-"""
-
-from __future__ import annotations
-
-import pathlib
-import shutil
-
-import pytest
-
-from adl_compliance.checks.release.changeset_plan import ChangesetPlan
-from adl_compliance.core.context import Context, FileSet
-from adl_compliance.core.verdict import Outcome, decide
-from adl_compliance.policy.registry import load
-
-FIXTURES = pathlib.Path(__file__).parent / "fixtures"
-CLEAN = FIXTURES / "clean"
-RELEVANT = FIXTURES / "relevant"
-
-ROW = load().by_id("REL-001")
-
-pytestmark = pytest.mark.skipif(
-    shutil.which("bash") is None, reason="release.changeset-plan drives bash"
-)
-
-
-def corpus_files(root: pathlib.Path) -> tuple[str, ...]:
-    """Every file in the corpus, relative to it — the same shape
-    `_corpus-set.sh`'s `corpus_set` produced for the shell test."""
-    return tuple(
-        sorted(
-            str(path.relative_to(root))
-            for path in root.rglob("*")
-            if path.is_file()
-        )
-    )
-
-
-def graded(root: pathlib.Path, given: tuple[str, ...]):
-    ctx = Context(
-        root=root, row=ROW,
-        inputs={
-            "changeset_tool": root / "release" / "changeset-tooling.sh",
-            "workflows_package": root / ".workflows" / "package.json",
-            "changesets_package": root / ".workflows" / "changesets" / "package.json",
-            "changesets_lock": root / ".workflows" / "changesets" / "bun.lock",
-        },
-    )
-    findings = tuple(ChangesetPlan().graded(ctx, FileSet(paths=given)))
-    return decide(ROW, findings, 0, ())
-
-
-def test_the_row_declares_the_gate_this_check_ports() -> None:
-    assert ROW.domain == "release"
-    assert ROW.name == "changeset-plan"
-
-
-def test_the_fixture_premise_holds() -> None:
-    """A mistyped fixture path would leave every assertion below vacuous."""
-    assert (CLEAN / "docs" / "readme.md").is_file()
-    assert (RELEVANT / "VERSION").is_file()
-    assert not (RELEVANT / "release").exists()
-
-
-def test_no_release_relevant_path_is_a_clean_no_op() -> None:
-    verdict = graded(CLEAN, corpus_files(CLEAN))
-    assert verdict.outcome is Outcome.CLEAN, verdict.render()
-    assert verdict.findings == ()
-
-
-def test_a_release_relevant_path_reaches_the_tool_and_reports_its_failure() -> None:
-    verdict = graded(RELEVANT, corpus_files(RELEVANT))
-    assert verdict.outcome is Outcome.FINDINGS, verdict.render()
-    assert len(verdict.findings) == 1
-    finding = verdict.findings[0]
-    assert finding.rule == "REL-001"
-    assert finding.path == ".changeset"
-    assert finding.message == (
-        "changeset status could not be computed for a release-relevant change"
-    )
-
-
-def test_an_empty_set_grades_nothing() -> None:
-    verdict = graded(CLEAN, ())
-    assert verdict.outcome is Outcome.CLEAN, verdict.render()
-    assert verdict.findings == ()
-
-
-def test_changeset_star_matches_a_nested_path_like_the_shell_case_pattern() -> None:
-    """bash `case` patterns are not restricted to filesystem pathname
-    semantics: `.changeset/*` matches a path with more than one segment
-    beneath it, the same reach as the row's own `.changeset/**` scope."""
-    patterns = ChangesetPlan.ROOT_RELEVANT + (".workflows/package.json",)
-    assert ChangesetPlan._is_release_relevant(".changeset/nested/plan.md", patterns)
-    assert ChangesetPlan._is_release_relevant(".changeset/plan.md", patterns)
-    assert not ChangesetPlan._is_release_relevant("docs/readme.md", patterns)
-
-
-def test_a_redeclared_workflows_tree_is_honoured() -> None:
-    """FIXED 2026-09-15 (K-42 sweep): the bug this pins is SILENT — the old
-    `RELEASE_RELEVANT` tuple hardcoded `.workflows/...`, and `_is_release_
-    relevant` filtered the given set against it directly. A repository
-    declaring `workflows = "my-workflows"` with a real, changed `my-workflows
-    /package.json` in the given set would have that file match NOTHING,
-    `graded` would return on its very first line, and this gate would go
-    quiet over a release-relevant change it never read — never an error,
-    never a finding, a clean pass over unread content. This drives the real
-    `<workflows>` resolution (not the manual `inputs` override every other
-    test in this file uses) via `runner.resolve_inputs`/`effective_trees`,
-    and a given set containing ONLY the redeclared-tree path (nothing under
-    `.workflows/` at all) — proving the match comes from the resolved tree,
-    not a coincidental literal overlap."""
-    from contextlib import ExitStack
-
-    from adl_compliance import runner
-    from adl_compliance.policy.registry import effective_trees
-
-    tool = RELEVANT / "release" / "changeset-tooling.sh"
-    with ExitStack() as stack:
-        inputs = runner.resolve_inputs(
-            ChangesetPlan, RELEVANT, {ChangesetPlan.id: {"changeset_tool": tool}}, stack,
-            effective_trees({"workflows": "my-workflows"}),
-        )
-        ctx = Context(root=RELEVANT, row=ROW, inputs=inputs)
-        findings = tuple(
-            ChangesetPlan().graded(ctx, FileSet(paths=("my-workflows/package.json",)))
-        )
-    verdict = decide(ROW, findings, 0, ())
-    assert verdict.outcome is Outcome.FINDINGS, verdict.render()
-    assert verdict.findings[0].rule == "REL-001"

package/packages/repo-controls/package/adl-compliance/src/adl_compliance/checks/release/version_release/__init__.py

@@ -1,11 +0,0 @@
-"""The `release.version-release` gate.
-
-A folder rather than a module because this gate's fixture corpora — an
-aligned checkout and a drifted one — belong beside the check that reads them.
-"""
-
-from __future__ import annotations
-
-from .check import VersionRelease
-
-__all__ = ["VersionRelease"]

package/packages/repo-controls/package/adl-compliance/src/adl_compliance/checks/release/version_release/check.py

@@ -1,202 +0,0 @@
-"""REL-004 — VERSION, CHANGELOG.md, and the two workflow manifests, aligned.
-
-Ported from `compliance_new/checks/release/version-release/check.sh`. Entirely
-`structural`: every file this gate reads — VERSION, CHANGELOG.md, and the two
-entries in the shell's `versioned_files` array — is a FIXED, named path, never
-a member of the given set. That script's own comment says the same thing:
-"This gate reads no file set: the manifests it aligns are a FIXED list, named
-in the row's `engine.scope` so the runner selects it when one of them
-changes." There is no `graded` override for the same reason `COV-003` and
-`PIP-001` have none: nothing here is answered by iterating the given set.
-
-Two tiers, ported as two distinct behaviours because the shell script itself
-keeps them apart:
-
-  VERREL-INPUT   the shell's own bare `fail()` calls — VERSION missing, empty,
-                 or not `x.y.z`; CHANGELOG.md missing or carrying no readable
-                 latest-release heading; a versioned manifest missing or
-                 carrying no readable version field. Each is a HARD STOP in
-                 `check.sh`: it calls `fail`, which prints to stderr and does
-                 `exit 1` directly, WITHOUT ever calling `report_finding` —
-                 so at most one such condition is ever surfaced per run, and
-                 the script never reaches the alignment checks below it once
-                 one has fired. This port matches that: every branch below
-                 yields at most one `VERREL-INPUT` finding and returns. No
-                 shell rule id exists for this tier; `VERREL-INPUT` is invented
-                 here the same way `COV-003`'s port invented `COVBASE-INPUT`
-                 and `PIP-001`'s invented `PIPTR-INPUT`, both for shell scripts
-                 that only ever wrote ad hoc prose to stderr on this same kind
-                 of precondition failure.
-
-  VER-001        the shell's own `report_finding VER-001 ...` calls — a
-                 manifest's or CHANGELOG.md's version does not match VERSION's.
-                 ACCUMULATING, exactly as the shell script's `for` loop and
-                 trailing CHANGELOG.md comparison never stop after the first
-                 mismatch: every versioned file is graded independently, and
-                 the CHANGELOG.md comparison always runs afterward regardless
-                 of what the loop found.
-
-`read_toml_version`'s case-statement arm (`check.sh`'s `case "$file" in
-*.json) ...;; *) toml;; esac`) is ported as `_TOML_VERSION` even though both of
-today's `VERSIONED_FILES` entries are `.json` and never reach it — the shell
-dispatches on each entry's own suffix, not on a fixed list of json-only names,
-so a future `.toml` entry would already be handled correctly by this port too.
-"""
-
-from __future__ import annotations
-
-import re
-from collections.abc import Iterable
-from typing import ClassVar
-
-from ....core.check import Check
-from ....core.context import Context
-from ....core.finding import Report
-
-
-class VersionRelease(Check):
-    id: ClassVar[str] = "REL-004"
-    rule: ClassVar[str] = "VER-001"
-
-    INPUT: ClassVar[str] = "VERREL-INPUT"
-
-    # check.sh's own `versioned_files` array, verbatim order: changesets
-    # first, then the workflow root manifest. Fixed 2026-09-15 (K-42 sweep):
-    # these were hardcoded `.workflows/...` literals read directly via
-    # `self.text(ctx, relative)`, bypassing `ctx.inputs`/tree resolution
-    # entirely — a repository declaring `workflows` away from its packaged
-    # default got both manifests reported as flatly missing (LOUD, but
-    # against the wrong path).
-    inputs: ClassVar[dict[str, str]] = {
-        "changesets_package": "<workflows>/changesets/package.json",
-        "workflows_package": "<workflows>/package.json",
-    }
-
-    _SEMVER: ClassVar[re.Pattern[str]] = re.compile(r"^[0-9]+\.[0-9]+\.[0-9]+$")
-    # `read_json_version`'s sed: leading whitespace tolerated before the key.
-    _JSON_VERSION: ClassVar[re.Pattern[str]] = re.compile(r'^\s*"version"\s*:\s*"([^"]*)".*$')
-    # `read_toml_version`'s sed: no leading whitespace tolerated at all.
-    _TOML_VERSION: ClassVar[re.Pattern[str]] = re.compile(r'^version = "([^"]*)".*$')
-    # `tr -d '[:space:]'`'s POSIX class, spelled out rather than Python's wider
-    # (Unicode-including) `\s`.
-    _POSIX_SPACE: ClassVar[re.Pattern[str]] = re.compile(r"[ \t\n\r\v\f]")
-    _UNRELEASED_BRACKET: ClassVar[re.Pattern[str]] = re.compile(r"^## \[Unreleased\]")
-
-    def structural(self, ctx: Context) -> Iterable[Report]:
-        version_body = self.text(ctx, "VERSION")
-        if version_body is None:
-            yield self._input(
-                "VERSION", "VERSION is missing",
-                "create a VERSION file at the repository root holding the "
-                "canonical semantic version",
-            )
-            return
-
-        canonical_version = self._POSIX_SPACE.sub("", version_body)
-        if not canonical_version:
-            yield self._input(
-                "VERSION", "VERSION is empty",
-                "write the canonical semantic version into VERSION",
-            )
-            return
-        if not self._SEMVER.match(canonical_version):
-            yield self._input(
-                "VERSION", f"VERSION is not semantic x.y.z: {canonical_version}",
-                f"rewrite VERSION to hold a semantic x.y.z version instead of "
-                f"'{canonical_version}'",
-            )
-            return
-
-        changelog_body = self.text(ctx, "CHANGELOG.md")
-        if changelog_body is None:
-            yield self._input(
-                "CHANGELOG.md", "CHANGELOG.md is missing",
-                "create CHANGELOG.md recording the release history",
-            )
-            return
-
-        changelog_version = self._latest_changelog_version(changelog_body)
-        if not changelog_version:
-            yield self._input(
-                "CHANGELOG.md",
-                "unable to read latest CHANGELOG.md release version",
-                "add a release heading to CHANGELOG.md (## x.y.z or "
-                "## [x.y.z]) naming the current release",
-            )
-            return
-
-        for name in ("changesets_package", "workflows_package"):
-            path = ctx.inputs[name]
-            relative = ctx.relative(path)
-            body = self.text(ctx, path)
-            if body is None:
-                yield self._input(
-                    relative, f"{relative} is missing",
-                    f"create {relative} declaring a version field",
-                )
-                return
-            file_version = self._file_version(relative, body)
-            if not file_version:
-                yield self._input(
-                    relative, f"unable to read version from {relative}",
-                    f"add a version field to {relative}",
-                )
-                return
-            if file_version != canonical_version:
-                yield self.report(
-                    relative,
-                    f"{relative} has version {file_version}, expected "
-                    f"{canonical_version} (from VERSION)",
-                    f"update {relative}'s version field to {canonical_version}",
-                )
-
-        if changelog_version != canonical_version:
-            yield self.report(
-                "CHANGELOG.md",
-                f"CHANGELOG.md's latest release heading is {changelog_version}, "
-                f"expected {canonical_version} (from VERSION)",
-                f"add or rename CHANGELOG.md's latest release heading to "
-                f"## {canonical_version}",
-            )
-
-    # ------------------------------------------------------------- hard stops
-
-    def _input(self, path: str, message: str, fix: str) -> Report:
-        return self.report(path, message, fix, rule=self.INPUT)
-
-    # ------------------------------------------------------------- reading
-
-    def _file_version(self, relative: str, body: str) -> str | None:
-        pattern = self._JSON_VERSION if relative.endswith(".json") else self._TOML_VERSION
-        for line in body.splitlines():
-            match = pattern.match(line)
-            if match is not None:
-                return match.group(1)
-        return None
-
-    def _latest_changelog_version(self, body: str) -> str | None:
-        """awk's one-pass scan: the FIRST `## ` heading that is not the
-        Unreleased section, stripped of its `## [`/`]…`/`## ` wrapping —
-        in that fixed order, so a bracketed and a bare heading both resolve to
-        the bare version text."""
-        for line in body.splitlines():
-            if not line.startswith("## "):
-                continue
-            if self._UNRELEASED_BRACKET.match(line):
-                continue
-            if line == "## Unreleased":
-                continue
-            return self._strip_heading(line)
-        return None
-
-    @staticmethod
-    def _strip_heading(line: str) -> str:
-        text = line
-        if text.startswith("## ["):
-            text = text[4:]
-        end = text.find("]")
-        if end != -1:
-            text = text[:end]
-        if text.startswith("## "):
-            text = text[3:]
-        return text

package/packages/repo-controls/package/adl-compliance/src/adl_compliance/checks/release/version_release/fixtures/aligned/.workflows/changesets/package.json

@@ -1,5 +0,0 @@
-{
-  "name": "changesets-fixture",
-  "version": "1.2.3",
-  "private": true
-}

package/packages/repo-controls/package/adl-compliance/src/adl_compliance/checks/release/version_release/fixtures/aligned/.workflows/package.json

@@ -1,5 +0,0 @@
-{
-  "name": "workflows-fixture",
-  "version": "1.2.3",
-  "private": true
-}

package/packages/repo-controls/package/adl-compliance/src/adl_compliance/checks/release/version_release/fixtures/aligned/CHANGELOG.md

@@ -1,5 +0,0 @@
-# Changelog
-
-## 1.2.3
-
-- fixture: aligned release notes