@amcharts/amcharts5-mcp 1.9.1 → 1.9.3

package/extended/charts/hierarchy/treemap.md

@@ -1,6 +1,6 @@
 ---
 title: "Treemap"
-source: "https://www.amcharts.com/docs/v5/charts/hierarchy/treemap/"
+source: "https://docs.amcharts.com/v5/charts/hierarchy/treemap/"
 scraped: "2026-03-15"
 ---
 
@@ -117,7 +117,7 @@ Default behavior
 
 The appearance of node rectangles can be configured using their template, accessible on series property: `rectangles.template`.
 
-The template can have contain any `RoundedRectangle` [setting](https://www.amcharts.com/docs/v5/reference/roundedrectangle/#Settings).
+The template can have contain any `RoundedRectangle` [setting](https://docs.amcharts.com/v5/reference/roundedrectangle/#settings).
 
 series.rectangles.template.setAll({
   fillOpacity: 0.7,
@@ -137,7 +137,7 @@ series.rectangles.template.setAll({
 
 ### Hover behavior
 
-We can set setting values to apply to a rectangle when it is hovered by creating a "hover" [state](https://www.amcharts.com/docs/v5/concepts/settings/states/) for it.
+We can set setting values to apply to a rectangle when it is hovered by creating a "hover" [state](https://docs.amcharts.com/v5/concepts/settings/states/) for it.
 
 series.rectangles.template.states.create("hover", {
   fill: am5.color(0x677935),
@@ -167,7 +167,7 @@ series.labels.template.setAll({
   text: "{category}"
 });
 
-Partition series uses `[Label](https://www.amcharts.com/docs/v5/reference/label/)` for its labels. Check out its class reference for all the [possible settings](https://www.amcharts.com/docs/v5/reference/label/#Settings).
+Partition series uses `[Label](https://docs.amcharts.com/v5/reference/label/)` for its labels. Check out its class reference for all the [possible settings](https://docs.amcharts.com/v5/reference/label/#settings).
 
 ### Label content
 
@@ -185,7 +185,7 @@ series.labels.template.setAll({
   fontSize: 14
 });
 
-Contents of the tooltip can include [data placeholders](https://www.amcharts.com/docs/v5/concepts/formatters/data-placeholders/) (codes in curly brackets that will be replaced by actual data) and [in-line formatting blocks](https://www.amcharts.com/docs/v5/concepts/formatters/text-styling/) (formatting instructions enclosed in square brackets).
+Contents of the tooltip can include [data placeholders](https://docs.amcharts.com/v5/concepts/formatters/data-placeholders/) (codes in curly brackets that will be replaced by actual data) and [in-line formatting blocks](https://docs.amcharts.com/v5/concepts/formatters/text-styling/) (formatting instructions enclosed in square brackets).
 
 ### Disabling labels
 
@@ -205,18 +205,18 @@ series.nodes.template.set("tooltipText", "{category}: \[bold\]{sum}\[/\]");
 
 series.nodes.template.set("tooltipText", "{category}: \[bold\]{sum}\[/\]");
 
-Contents of the tooltip can include [data placeholders](https://www.amcharts.com/docs/v5/concepts/formatters/data-placeholders/) (codes in curly brackets that will be replaced by actual data) and [in-line formatting blocks](https://www.amcharts.com/docs/v5/concepts/formatters/text-styling/) (formatting instructions enclosed in square brackets).
+Contents of the tooltip can include [data placeholders](https://docs.amcharts.com/v5/concepts/formatters/data-placeholders/) (codes in curly brackets that will be replaced by actual data) and [in-line formatting blocks](https://docs.amcharts.com/v5/concepts/formatters/text-styling/) (formatting instructions enclosed in square brackets).
 
 ## Example
 
 
 ## Related tutorials
 
--   [Adaptive label colors on a Treemap](https://www.amcharts.com/docs/v5/tutorials/adaptive-label-colors-on-a-treemap/)
--   [Treemap with partial fills in nodes](https://www.amcharts.com/docs/v5/tutorials/treemap-with-partial-fills-in-nodes/) (demo)
--   [Treemap with auto-colored labels](https://www.amcharts.com/docs/v5/tutorials/treemap-with-auto-colored-labels/) (demo)
--   [Treemap with highlight of parent node on hover](https://www.amcharts.com/docs/v5/tutorials/treemap-with-highlight-of-parent-node-on-hover/) (demo)
+-   [Adaptive label colors on a Treemap](https://docs.amcharts.com/v5/tutorials/adaptive-label-colors-on-a-treemap/)
+-   [Treemap with partial fills in nodes](https://docs.amcharts.com/v5/tutorials/treemap-with-partial-fills-in-nodes/) (demo)
+-   [Treemap with auto-colored labels](https://docs.amcharts.com/v5/tutorials/treemap-with-auto-colored-labels/) (demo)
+-   [Treemap with highlight of parent node on hover](https://docs.amcharts.com/v5/tutorials/treemap-with-highlight-of-parent-node-on-hover/) (demo)
 
 ## Related class references
 
--   [Treemap](https://www.amcharts.com/docs/v5/reference/treemap)
+-   [Treemap](https://docs.amcharts.com/v5/reference/treemap/)

package/extended/charts/hierarchy/voronoi-treemap.md

@@ -1,6 +1,6 @@
 ---
 title: "Voronoi Treemap"
-source: "https://www.amcharts.com/docs/v5/charts/hierarchy/voronoi-treemap/"
+source: "https://docs.amcharts.com/v5/charts/hierarchy/voronoi-treemap/"
 scraped: "2026-10-08"
 ---
 
@@ -94,7 +94,7 @@ series.polygons.template.setAll({
 
 ### Hover behavior
 
-We can set setting values to apply to a rectangle when it is hovered by creating a "hover" [state](https://www.amcharts.com/docs/v5/concepts/settings/states/) for it.
+We can set setting values to apply to a rectangle when it is hovered by creating a "hover" [state](https://docs.amcharts.com/v5/concepts/settings/states/) for it.
 
 series.polygons.template.states.create("hover", {
   fill: am5.color(0x677935),
@@ -124,7 +124,7 @@ series.labels.template.setAll({
   text: "{category}"
 });
 
-Partition series uses `[Label](https://www.amcharts.com/docs/v5/reference/label/)` for its labels. Check out its class reference for all the [possible settings](https://www.amcharts.com/docs/v5/reference/label/#Settings).
+Partition series uses `[Label](https://docs.amcharts.com/v5/reference/label/)` for its labels. Check out its class reference for all the [possible settings](https://docs.amcharts.com/v5/reference/label/#settings).
 
 ### Label content
 
@@ -142,7 +142,7 @@ series.labels.template.setAll({
   fontSize: 14
 });
 
-Contents of the tooltip can include [data placeholders](https://www.amcharts.com/docs/v5/concepts/formatters/data-placeholders/) (codes in curly brackets that will be replaced by actual data) and [in-line formatting blocks](https://www.amcharts.com/docs/v5/concepts/formatters/text-styling/) (formatting instructions enclosed in square brackets).
+Contents of the tooltip can include [data placeholders](https://docs.amcharts.com/v5/concepts/formatters/data-placeholders/) (codes in curly brackets that will be replaced by actual data) and [in-line formatting blocks](https://docs.amcharts.com/v5/concepts/formatters/text-styling/) (formatting instructions enclosed in square brackets).
 
 ### Disabling labels
 
@@ -154,7 +154,7 @@ series.labels.template.set("forceHidden", true);
 
 ## Different settings based on level
 
-It's possible target settings to nodes and labels at specific level of the hierarchy using [custom themes](https://www.amcharts.com/docs/v5/concepts/themes/#quick-custom-theme).
+It's possible target settings to nodes and labels at specific level of the hierarchy using [custom themes](https://docs.amcharts.com/v5/concepts/themes/#quick-custom-theme).
 
 The following code will hide all top- and first-level labels, as well as apply thicker outline to the first-level nodes:
 
@@ -208,7 +208,7 @@ series.nodes.template.set("tooltipText", "{category}: \[bold\]{sum}\[/\]");
 
 series.nodes.template.set("tooltipText", "{category}: \[bold\]{sum}\[/\]");
 
-Contents of the tooltip can include [data placeholders](https://www.amcharts.com/docs/v5/concepts/formatters/data-placeholders/) (codes in curly brackets that will be replaced by actual data) and [in-line formatting blocks](https://www.amcharts.com/docs/v5/concepts/formatters/text-styling/) (formatting instructions enclosed in square brackets).
+Contents of the tooltip can include [data placeholders](https://docs.amcharts.com/v5/concepts/formatters/data-placeholders/) (codes in curly brackets that will be replaced by actual data) and [in-line formatting blocks](https://docs.amcharts.com/v5/concepts/formatters/text-styling/) (formatting instructions enclosed in square brackets).
 
 ## Example
 

package/extended/charts/hierarchy.md

@@ -1,6 +1,6 @@
 ---
 title: "Hierarchy charts"
-source: "https://www.amcharts.com/docs/v5/charts/hierarchy/"
+source: "https://docs.amcharts.com/v5/charts/hierarchy/"
 scraped: "2026-10-08"
 ---
 
@@ -20,7 +20,7 @@ For vanilla JavaScript applications and web pages, you can use "script" version:
 <script src="https://cdn.amcharts.com/lib/5/index.js"></script>
 <script src="https://cdn.amcharts.com/lib/5/hierarchy.js"></script>
 
-MORE INFO For more information on installing amCharts 5 as well as loading modules refer to our "[Getting started](https://www.amcharts.com/docs/v5/getting-started/)" tutorial.
+MORE INFO For more information on installing amCharts 5 as well as loading modules refer to our "[Getting started](https://docs.amcharts.com/v5/getting-started/)" tutorial.
 
 ## Series
 
@@ -36,31 +36,31 @@ Example
 
 `ForceDirected`
 
-[More info](https://www.amcharts.com/docs/v5/charts/hierarchy/force-directed/)
+[More info](https://docs.amcharts.com/v5/charts/hierarchy/force-directed/)
 
 `Pack`
 
-[More info](https://www.amcharts.com/docs/v5/charts/hierarchy/pack/)
+[More info](https://docs.amcharts.com/v5/charts/hierarchy/pack/)
 
 `Partition`
 
-[More info](https://www.amcharts.com/docs/v5/charts/hierarchy/partition/)
+[More info](https://docs.amcharts.com/v5/charts/hierarchy/partition/)
 
 `Sunburst`
 
-[More info](https://www.amcharts.com/docs/v5/charts/hierarchy/sunburst/)
+[More info](https://docs.amcharts.com/v5/charts/hierarchy/sunburst/)
 
 `Tree`
 
-[More info](https://www.amcharts.com/docs/v5/charts/hierarchy/tree/)
+[More info](https://docs.amcharts.com/v5/charts/hierarchy/tree/)
 
 `Treemap`
 
-[More info](https://www.amcharts.com/docs/v5/charts/hierarchy/treemap/)
+[More info](https://docs.amcharts.com/v5/charts/hierarchy/treemap/)
 
 `VoronoiTreemap`
 
-[More info](https://www.amcharts.com/docs/v5/charts/hierarchy/voronoi-treemap/)
+[More info](https://docs.amcharts.com/v5/charts/hierarchy/voronoi-treemap/)
 
 Like everywhere else, we use its `new()` method to instantiate series, then push it into `series` list of the chart:
 
@@ -222,7 +222,7 @@ The above will make the chart start with "A0" and "C0" nodes collapsed, while "B
 
 ### Data structure
 
-IMORTANT A data for all hierarchy charts requires to have just one top item. Having several items on top level might break the chart. If we don't want this top item to appear on the chart itself, we can hide it by providing `topLevel: 1` in series settings. Refer to "[Tree depth](https://www.amcharts.com/docs/v5/getting-started/hierarchy/#Tree_depth)" section of this tutorial for more info.
+IMORTANT A data for all hierarchy charts requires to have just one top item. Having several items on top level might break the chart. If we don't want this top item to appear on the chart itself, we can hide it by providing `topLevel: 1` in series settings. Refer to "[Tree depth](https://docs.amcharts.com/v5/charts/hierarchy/#tree-depth)" section of this tutorial for more info.
 
 ### Setting data
 
@@ -312,7 +312,7 @@ series.data.setAll(\[{
 
 IMPORTANT It's a good practice to make sure that setting data happens as late into code as possible. Once you set data, all related objects are created, so any configuration settings applied afterwards might not carry over.
 
-MORE INFO There are more ways to set, update, add, or load data. For more information please refer to our dedicated "[Data](https://www.amcharts.com/docs/v5/concepts/data/)" tutorial.
+MORE INFO There are more ways to set, update, add, or load data. For more information please refer to our dedicated "[Data](https://docs.amcharts.com/v5/concepts/data/)" tutorial.
 
 ### Flat data
 
@@ -374,12 +374,12 @@ IMPORTANT The `selectedDataItem` needs to be set **after** data is set to the se
 
 For more information about configuring appearance of the flow series, refer to respective tutorials:
 
--   [Configuring Force-directed series](https://www.amcharts.com/docs/v5/getting-started/hierarchy/force-directed/).
--   [Configuring Pack series](https://www.amcharts.com/docs/v5/getting-started/hierarchy/pack/).
--   [Configuring Partition](https://www.amcharts.com/docs/v5/getting-started/hierarchy/partition/).
--   [Configuring Sunburst](https://www.amcharts.com/docs/v5/getting-started/hierarchy/sunburst/).
--   [Configuring Tree](https://www.amcharts.com/docs/v5/getting-started/hierarchy/tree/).
--   [Configuring Treemap](https://www.amcharts.com/docs/v5/getting-started/hierarchy/treemap/).
+-   [Configuring Force-directed series](https://docs.amcharts.com/v5/charts/hierarchy/force-directed/).
+-   [Configuring Pack series](https://docs.amcharts.com/v5/charts/hierarchy/pack/).
+-   [Configuring Partition](https://docs.amcharts.com/v5/charts/hierarchy/partition/).
+-   [Configuring Sunburst](https://docs.amcharts.com/v5/charts/hierarchy/sunburst/).
+-   [Configuring Tree](https://docs.amcharts.com/v5/charts/hierarchy/tree/).
+-   [Configuring Treemap](https://docs.amcharts.com/v5/charts/hierarchy/treemap/).
 
 ## Node value
 
@@ -399,7 +399,7 @@ To paraphrase the above, there are two "correct" ways to set values in hierarchy
 
 There is a number of ways we can specify all colors for hierarchy nodes.
 
-For information on how to do that, refer to "[Hierarchy node colors](https://www.amcharts.com/docs/v5/charts/hierarchy/hierarchy-node-colors/)" tutorial.
+For information on how to do that, refer to "[Hierarchy node colors](https://docs.amcharts.com/v5/charts/hierarchy/hierarchy-node-colors/)" tutorial.
 
 ## Tooltips
 
@@ -411,13 +411,13 @@ series.nodes.template.set("tooltipText", "{category}: \[bold\]{sum}\[/\]");
 
 series.nodes.template.set("tooltipText", "{category}: \[bold\]{sum}\[/\]");
 
-Contents of the tooltip can include [data placeholders](https://www.amcharts.com/docs/v5/concepts/formatters/data-placeholders/) (codes in curly brackets that will be replaced by actual data) and [in-line formatting blocks](https://www.amcharts.com/docs/v5/concepts/formatters/text-styling/) (formatting instructions enclosed in square brackets).
+Contents of the tooltip can include [data placeholders](https://docs.amcharts.com/v5/concepts/formatters/data-placeholders/) (codes in curly brackets that will be replaced by actual data) and [in-line formatting blocks](https://docs.amcharts.com/v5/concepts/formatters/text-styling/) (formatting instructions enclosed in square brackets).
 
-Refer to `[IHierarchyDataItem](https://www.amcharts.com/docs/v5/reference/ihierarchydataitem/)` for available keys for the data placeholders.
+Refer to `[IHierarchyDataItem](https://docs.amcharts.com/v5/reference/ihierarchydataitem/)` for available keys for the data placeholders.
 
 ## Tree depth
 
-There are two hierarchy settings that control depth of the tree: `[initialDepth](https://www.amcharts.com/docs/v5/reference/hierarchy/#initialDepth_setting)` and `[topDepth](https://www.amcharts.com/docs/v5/reference/hierarchy/#topDepth_setting)`.
+There are two hierarchy settings that control depth of the tree: `[initialDepth](https://docs.amcharts.com/v5/reference/hierarchy/#initialDepth_setting)` and `[topDepth](https://docs.amcharts.com/v5/reference/hierarchy/#topDepth_setting)`.
 
 `initialDepth` specifies how mane levels to show initially, when the chart loads.
 
@@ -469,7 +469,7 @@ Hierarchy nodes that have children are clickable.
 
 Depending on series type and settings, certain drill-down actions happen, like zooming in on the node, exploding a children tree, etc.
 
-For more information about this, please refer to "[Hierarchy drill-down](https://www.amcharts.com/docs/v5/charts/hierarchy/hierarchy-drill-down/)" tutorial.
+For more information about this, please refer to "[Hierarchy drill-down](https://docs.amcharts.com/v5/charts/hierarchy/hierarchy-drill-down/)" tutorial.
 
 ## Additional controls
 
@@ -491,7 +491,7 @@ var container = root.container.children.push(am5.Container.new(root, {
   layout: root.verticalLayout
 }));
 
-NOTEThe `layout` setting of the wrapper container will determine how chart elements are laid out. For more information, refer to "Containers: [Layout](https://www.amcharts.com/docs/v5/concepts/common-elements/containers/#Layout)".
+NOTEThe `layout` setting of the wrapper container will determine how chart elements are laid out. For more information, refer to "Containers: [Layout](https://docs.amcharts.com/v5/concepts/common-elements/containers/#layout)".
 
 ### Chart title
 
@@ -529,7 +529,7 @@ container.children.unshift(
   })
 );
 
-For more information on how to use breadcrumb control, refer to "[Breadcrumb navigation](https://www.amcharts.com/docs/v5/getting-started/hierarchy/breadcrumbs/)" tutorial.
+For more information on how to use breadcrumb control, refer to "[Breadcrumb navigation](https://docs.amcharts.com/v5/charts/hierarchy/breadcrumbs/)" tutorial.
 
 ### Legend
 
@@ -555,7 +555,7 @@ var legend = container.children.push(am5.Legend.new(root, {
 
 legend.data.setAll(series.dataItems\[0\].get("children"));
 
-MORE INFO For more information on how to configure the legend, set its contents, and other tricks, please visit our dedicated "[Legend](https://www.amcharts.com/docs/v5/concepts/legend/)" tutorial.
+MORE INFO For more information on how to configure the legend, set its contents, and other tricks, please visit our dedicated "[Legend](https://docs.amcharts.com/v5/concepts/legend/)" tutorial.
 
 
 ## Complete example

package/extended/charts/map-chart/clustered-point-series.md

@@ -1,6 +1,6 @@
 ---
 title: "Clustered point series"
-source: "https://www.amcharts.com/docs/v5/charts/map-chart/clustered-point-series/"
+source: "https://docs.amcharts.com/v5/charts/map-chart/clustered-point-series/"
 scraped: "2026-03-15"
 ---
 
@@ -24,7 +24,7 @@ var pointSeries = chart.series.push(
   })
 );
 
-MORE INFOPlease refer to "[Map point series](https://www.amcharts.com/docs/v5/charts/map-chart/map-point-series/)" documentation for info on how to configure series markers (bullets), series itself, as well as set data.
+MORE INFOPlease refer to "[Map point series](https://docs.amcharts.com/v5/charts/map-chart/map-point-series/)" documentation for info on how to configure series markers (bullets), series itself, as well as set data.
 
 ## Configuring
 
@@ -199,7 +199,7 @@ pointSeries.set("clusteredBullet", function(root) {
 
 We can also add a `Label` element to our bullet to show the number of regular bullets that went into a group bullet.
 
-Since every bullet element has also access to bullet's data item, we can use [data placeholders](https://www.amcharts.com/docs/v5/concepts/formatters/data-placeholders/) to dynamically populate our label.
+Since every bullet element has also access to bullet's data item, we can use [data placeholders](https://docs.amcharts.com/v5/concepts/formatters/data-placeholders/) to dynamically populate our label.
 
 pointSeries.set("clusteredBullet", function(root) {
   const container = am5.Container.new(root, {});

package/extended/charts/map-chart/country-data.md

@@ -1,6 +1,6 @@
 ---
 title: "Country data"
-source: "https://www.amcharts.com/docs/v5/charts/map-chart/country-data/"
+source: "https://docs.amcharts.com/v5/charts/map-chart/country-data/"
 scraped: "2026-03-15"
 ---
 

package/extended/charts/map-chart/graticule-series.md

@@ -1,6 +1,6 @@
 ---
 title: "Graticule series"
-source: "https://www.amcharts.com/docs/v5/charts/map-chart/graticule-series/"
+source: "https://docs.amcharts.com/v5/charts/map-chart/graticule-series/"
 scraped: "2026-03-15"
 ---
 
@@ -33,14 +33,14 @@ graticuleSeries.mapLines.template.setAll({
 
 The `unshift()` call above is used to insert graticule series at the beginning of the series list so it stays behind all the other series we may have.
 
-Please note that graticule series is actually a line series under the hood. Please refer to the "[Map line series](https://www.amcharts.com/docs/v5/charts/map-chart/map-line-series/)" tutorial for further info on how to configure appearance of the lines.
+Please note that graticule series is actually a line series under the hood. Please refer to the "[Map line series](https://docs.amcharts.com/v5/charts/map-chart/map-line-series/)" tutorial for further info on how to configure appearance of the lines.
 
 
 ## Grid density
 
 Normally. graticule series places a line every 10 degrees of latitude and longitude.
 
-We can change the density using series' `[step](https://www.amcharts.com/docs/v5/reference/graticuleseries/#step_setting)` setting:
+We can change the density using series' `[step](https://docs.amcharts.com/v5/reference/graticuleseries/#step_setting)` setting:
 
 let graticuleSeries = chart.series.unshift(
   am5map.GraticuleSeries.new(root, {

package/extended/charts/map-chart/map-api.md

@@ -1,6 +1,6 @@
 ---
 title: "Map API"
-source: "https://www.amcharts.com/docs/v5/charts/map-chart/map-api/"
+source: "https://docs.amcharts.com/v5/charts/map-chart/map-api/"
 scraped: "2026-03-15"
 ---
 
@@ -10,8 +10,8 @@ This tutorial will look at various API functions that can be used with a `MapCha
 
 A map chart has two methods that can be used to convert screen coordinates to longitude/latitude and back:
 
--   [invert](https://www.amcharts.com/docs/v5/reference/mapchart/#invert_method)() - converts screen coordinates to latitude/longitude.
--   [convert](https://www.amcharts.com/docs/v5/reference/mapchart/#convert_method)() - converts latitude/longitude to screen coordinates.
+-   [invert](https://docs.amcharts.com/v5/reference/mapchart/#invert_method)() - converts screen coordinates to latitude/longitude.
+-   [convert](https://docs.amcharts.com/v5/reference/mapchart/#convert_method)() - converts latitude/longitude to screen coordinates.
 
 The following code will capture click on a map chart and use `point` (which holds screen coordinates) to retrieve latitude/longitude of the click place.
 

package/extended/charts/map-chart/map-drill-down.md

@@ -1,6 +1,6 @@
 ---
 title: "Map drill-down"
-source: "https://www.amcharts.com/docs/v5/charts/map-chart/map-drill-down/"
+source: "https://docs.amcharts.com/v5/charts/map-chart/map-drill-down/"
 scraped: "2026-03-15"
 ---
 
@@ -86,7 +86,7 @@ continentSeries.mapPolygons.template.events.on("click", function (ev) {
   countrySeries.show();
 });
 
-MORE INFOFor more information about zooming map via API, refer to "Panning and zooming the map: [Zooming to clicked object](https://www.amcharts.com/docs/v5/charts/map-chart/map-pan-zoom/#Zooming_to_clicked_object)". For an in-depth info about events, check out "[Events](https://www.amcharts.com/docs/v5/concepts/events/)" tutorial.
+MORE INFOFor more information about zooming map via API, refer to "Panning and zooming the map: [Zooming to clicked object](https://docs.amcharts.com/v5/charts/map-chart/map-pan-zoom/#zooming-to-clicked-object)". For an in-depth info about events, check out "[Events](https://docs.amcharts.com/v5/concepts/events/)" tutorial.
 
 ### Drill-up
 
@@ -227,7 +227,7 @@ First we determine ID of a clicked country, by accessing `id` setting of its dat
 
 Then we determine which map is appropriate for the clicked country.
 
-We also use built-in [data loader](https://www.amcharts.com/docs/v5/concepts/data/#External_data) and JSON parser to load GeoJSON data as well as set it on the country series.
+We also use built-in [data loader](https://docs.amcharts.com/v5/concepts/data/#external-data) and JSON parser to load GeoJSON data as well as set it on the country series.
 
 Finally, to avoid visual glitches, we don't want country series geodata to be set before it finishes loading, or before zoom animation is played out, so we employ `Promise` mechanism to sync up zoom and loading.
 

package/extended/charts/map-chart/map-line-series.md

@@ -1,6 +1,6 @@
 ---
 title: "Map line series"
-source: "https://www.amcharts.com/docs/v5/charts/map-chart/map-line-series/"
+source: "https://docs.amcharts.com/v5/charts/map-chart/map-line-series/"
 scraped: "2026-10-08"
 ---
 
@@ -8,7 +8,7 @@ Map line series are used to plot projected lines on the map.
 
 ## Adding series
 
-To create a map line series we need to call its [`new()` method](https://www.amcharts.com/docs/v5/getting-started/#New_element_syntax) and push the new object into chart's `series` list:
+To create a map line series we need to call its [`new()` method](https://docs.amcharts.com/v5/getting-started/#new-element-syntax) and push the new object into chart's `series` list:
 
 let lineSeries = chart.series.push(
   am5map.MapLineSeries.new(root, {
@@ -26,7 +26,7 @@ var lineSeries = chart.series.push(
 
 ### Appearance
 
-Lines are configured using series' `mapLines.template`, which can be used to set any `MapLine` [setting](https://www.amcharts.com/docs/v5/reference/mapline/#Settings).
+Lines are configured using series' `mapLines.template`, which can be used to set any `MapLine` [setting](https://docs.amcharts.com/v5/reference/mapline/#settings).
 
 lineSeries.mapLines.template.setAll({
   stroke: am5.color(0xff0000),
@@ -97,9 +97,9 @@ lineSeries.mapLines.template.setAll({
 
 For scale: `400000` is about the height of the International Space Station. On a globe, lines rise away from its surface. On flat maps they rise up the screen.
 
-Once `altitude` is set (even to `0`), the ends of each leg are placed at the height of the points they connect: the [altitude](https://www.amcharts.com/docs/v5/charts/map-chart/map-point-series/#Altitude) of points in `pointsToConnect`, or the third value of the coordinates in `geometry` (in metres, as in GeoJSON). Lines without `altitude` stay on the ground, whatever their coordinates hold.
+Once `altitude` is set (even to `0`), the ends of each leg are placed at the height of the points they connect: the [altitude](https://docs.amcharts.com/v5/charts/map-chart/map-point-series/#altitude) of points in `pointsToConnect`, or the third value of the coordinates in `geometry` (in metres, as in GeoJSON). Lines without `altitude` stay on the ground, whatever their coordinates hold.
 
-To give each line its own height, set it via data using [template fields](https://www.amcharts.com/docs/v5/concepts/settings/template-fields/):
+To give each line its own height, set it via data using [template fields](https://docs.amcharts.com/v5/concepts/settings/template-fields/):
 
 lineSeries.mapLines.template.set("templateField", "lineSettings");
 
@@ -266,7 +266,7 @@ lineSeries.data.setAll(\[{
 
 We can also use series `pushDataItem()` method to add data lines one-by-one.
 
-The parameter is an object that adheres to `[IMapLineSeriesDataItem](https://www.amcharts.com/docs/v5/reference/imaplineseriesdataitem/)` interface.
+The parameter is an object that adheres to `[IMapLineSeriesDataItem](https://docs.amcharts.com/v5/reference/imaplineseriesdataitem/)` interface.
 
 lineSeries.pushDataItem({
   geometry: {
@@ -297,7 +297,7 @@ Or, if we have a map line series with points we'd like to connect, we can use `p
 
 ### Connecting line series points
 
-We can use actual data items from a [map point series](https://www.amcharts.com/docs/v5/charts/map-chart/map-point-series/) as points for the line.
+We can use actual data items from a [map point series](https://docs.amcharts.com/v5/charts/map-chart/map-point-series/) as points for the line.
 
 This eliminates the need to define `geometry` for our lines, as we can use `pointsToConnect` setting instead, which is an array of map line series' data items:
 
@@ -512,11 +512,11 @@ pointSeries.data.setAll([{
 }]);
 ```
 
-NOTE This matters when the chart is [serialized](https://www.amcharts.com/docs/v5/concepts/serializing/chart-serializer/): points created with `pushDataItem()` are not data rows, so they are not part of a serialized config. Points given as data rows are.
+NOTE This matters when the chart is [serialized](https://docs.amcharts.com/v5/concepts/serializing/chart-serializer/): points created with `pushDataItem()` are not data rows, so they are not part of a serialized config. Points given as data rows are.
 
 #### Animating a point along a line (5.20.8)
 
-To make a point travel along its line, give the bullet's sprite an [`animations`](https://www.amcharts.com/docs/v5/concepts/animations/) entry with `target: "dataItem"` that animates `positionOnLine`. Unlike a `dataItem.animate()` call in code, this is part of the config, so it survives serialization. (Since 5.21.0 `ChartSerializer` also writes a never-ending `dataItem.animate()` loop with a named easing as such an entry on the series' bullet - see "[Chart serializer](https://www.amcharts.com/docs/v5/concepts/serializing/chart-serializer/)" - but declaring it is the more direct way.)
+To make a point travel along its line, give the bullet's sprite an [`animations`](https://docs.amcharts.com/v5/concepts/animations/) entry with `target: "dataItem"` that animates `positionOnLine`. Unlike a `dataItem.animate()` call in code, this is part of the config, so it survives serialization. (Since 5.21.0 `ChartSerializer` also writes a never-ending `dataItem.animate()` loop with a named easing as such an entry on the series' bullet - see "[Chart serializer](https://docs.amcharts.com/v5/concepts/serializing/chart-serializer/)" - but declaring it is the more direct way.)
 
 ```javascript
 var planeSeries = chart.series.push(

package/extended/charts/map-chart/map-pan-zoom.md

@@ -1,6 +1,6 @@
 ---
 title: "Panning and zooming the map"
-source: "https://www.amcharts.com/docs/v5/charts/map-chart/map-pan-zoom/"
+source: "https://docs.amcharts.com/v5/charts/map-chart/map-pan-zoom/"
 scraped: "2026-10-08"
 ---
 
@@ -32,19 +32,19 @@ Move contents of the map without changing appearance.
 
 ## Zooming
 
-Zooming in and out the chart can be done in a variety of ways, e.g. with [mouse wheel](https://www.amcharts.com/docs/v5/charts/map-chart/map-pan-zoom/#Mouse_wheel_behavior) or pinch gestures, via API and some interactions on the map, or via [zoom control](#Zoom_control).
+Zooming in and out the chart can be done in a variety of ways, e.g. with [mouse wheel](https://docs.amcharts.com/v5/charts/map-chart/map-pan-zoom/#mouse-wheel-behavior) or pinch gestures, via API and some interactions on the map, or via [zoom control](#Zoom_control).
 
 ### Zoom steps
 
 Whenever zoom operation kicks in (via API, zoom control, or mouse wheel spin) the map changes its zoom level by `2`.
 
-We can change map chart's `[zoomStep](https://www.amcharts.com/docs/v5/reference/mapchart/#zoomStep_setting)` setting to a lower value (making zoom in slower) or to a bigger value to make map zoom in deeper with each step.
+We can change map chart's `[zoomStep](https://docs.amcharts.com/v5/reference/mapchart/#zoomStep_setting)` setting to a lower value (making zoom in slower) or to a bigger value to make map zoom in deeper with each step.
 
 ### Limiting zoom
 
 As a default behavior, map chart would not let zoom out beyond level `1` and zoom in beyond level `32`.
 
-We can change that using `[minZoomLevel](https://www.amcharts.com/docs/v5/reference/mapchart/#minZoomLevel_setting)` and `[maxZoomLevel](https://www.amcharts.com/docs/v5/reference/mapchart/#maxZoomLevel_setting)` chart settings respectively.
+We can change that using `[minZoomLevel](https://docs.amcharts.com/v5/reference/mapchart/#minZoomLevel_setting)` and `[maxZoomLevel](https://docs.amcharts.com/v5/reference/mapchart/#maxZoomLevel_setting)` chart settings respectively.
 
 let chart = root.container.children.push(
   am5map.MapChart.new(root, {
@@ -73,19 +73,19 @@ Method
 
 Comment
 
-`[zoomToPoint()](https://www.amcharts.com/docs/v5/reference/mapchart/#zoomToPoint_method)`
+`[zoomToPoint()](https://docs.amcharts.com/v5/reference/mapchart/#zoomToPoint_method)`
 
 Centers and zooms the map to specific X/Y coordinates in pixels.
 
-`[zoomToGeoPoint()](https://www.amcharts.com/docs/v5/reference/mapchart/#zoomToGeoPoint_method)`
+`[zoomToGeoPoint()](https://docs.amcharts.com/v5/reference/mapchart/#zoomToGeoPoint_method)`
 
 Centers and zooms the map to specific latitude/longitude coordinates and zoom level.
 
-`[zoomIn()](https://www.amcharts.com/docs/v5/reference/mapchart/#zoomIn_method)`
+`[zoomIn()](https://docs.amcharts.com/v5/reference/mapchart/#zoomIn_method)`
 
 Zooms the map in by `zoomStep` setting value.
 
-`[zoomOut()](https://www.amcharts.com/docs/v5/reference/mapchart/#zoomOut_method)`
+`[zoomOut()](https://docs.amcharts.com/v5/reference/mapchart/#zoomOut_method)`
 
 Zooms the map out by `zoomStep` setting value.
 
@@ -123,7 +123,7 @@ var polygonSeries = chart.series.push(
 
 Clicking the same polygon again, or the map's background, zooms back to the [home position](#Initial_position_and_zoom). On a rotating map, such as a globe, the map also turns to bring the polygon to the center.
 
-The polygon zoomed to is set as active, so we can highlight it with an "active" [state](https://www.amcharts.com/docs/v5/concepts/settings/states/):
+The polygon zoomed to is set as active, so we can highlight it with an "active" [state](https://docs.amcharts.com/v5/concepts/settings/states/):
 
 polygonSeries.mapPolygons.template.states.create("active", {
   fill: am5.color(0x297373)
@@ -517,7 +517,7 @@ NOTE `maxPanOut` is not relevant if pan settings are set to rotate the map, rat
 
 ### Setting
 
-Map chart has two options for setting its initial/default position and zoom level: `[homeGeoPoint](https://www.amcharts.com/docs/v5/reference/mapchart/#homeGeoPoint_setting)` and `[homeZoomLevel](https://www.amcharts.com/docs/v5/reference/mapchart/#homeZoomLevel_setting)` respectively.
+Map chart has two options for setting its initial/default position and zoom level: `[homeGeoPoint](https://docs.amcharts.com/v5/reference/mapchart/#homeGeoPoint_setting)` and `[homeZoomLevel](https://docs.amcharts.com/v5/reference/mapchart/#homeZoomLevel_setting)` respectively.
 
 We can use those to set those to center around some latitude/longitude coordinates and zoom in automatically on start.
 
@@ -539,7 +539,7 @@ var chart = root.container.children.push(
   })
 );
 
-The move is animated if the chart has an animation duration set, e.g. by the Animated theme, and instant otherwise. Since it needs no code, it also works in [JSON configs](https://www.amcharts.com/docs/v5/concepts/serializing/).
+The move is animated if the chart has an animation duration set, e.g. by the Animated theme, and instant otherwise. Since it needs no code, it also works in [JSON configs](https://docs.amcharts.com/v5/concepts/serializing/).
 
 NOTE`autoHome` is available since version 5.21.0. In earlier versions, call `chart.goHome()` in polygon series' `datavalidated` event instead.
 
@@ -625,7 +625,7 @@ chart.set("zoomControl", am5map.ZoomControl.new(root, {}));
 
 ### Configuring buttons
 
-Zoom control has two properties that hold button instances: `[minusButton](https://www.amcharts.com/docs/v5/reference/zoomcontrol/#minusButton_property)` and `[plusButton](https://www.amcharts.com/docs/v5/reference/zoomcontrol/#plusButton_property)`.
+Zoom control has two properties that hold button instances: `[minusButton](https://docs.amcharts.com/v5/reference/zoomcontrol/#minusButton_property)` and `[plusButton](https://docs.amcharts.com/v5/reference/zoomcontrol/#plusButton_property)`.
 
 Both are elements of type `Button`.
 
@@ -690,5 +690,5 @@ chart.set("zoomControl", am5map.ZoomControl.new(root, {
 
 ## Related tutorials
 
--   [Rotate and zoom the globe to a clicked country](https://www.amcharts.com/docs/v5/tutorials/rotate-and-zoom-the-globe-to-a-clicked-country/) (demo)
--   [Get points within current viewport of a MapChart](https://www.amcharts.com/docs/v5/tutorials/get-points-within-current-viewport-of-a-mapchart/) (demo)
+-   [Rotate and zoom the globe to a clicked country](https://docs.amcharts.com/v5/tutorials/rotate-and-zoom-the-globe-to-a-clicked-country/) (demo)
+-   [Get points within current viewport of a MapChart](https://docs.amcharts.com/v5/tutorials/get-points-within-current-viewport-of-a-mapchart/) (demo)