@alteriom/painlessmesh 1.7.7 → 1.7.9

package/examples/bridge/alteriom_sensor_package.hpp

@@ -0,0 +1,1170 @@
+#ifndef ALTERIOM_SENSOR_PACKAGE_HPP
+#define ALTERIOM_SENSOR_PACKAGE_HPP
+
+#include "painlessmesh/plugin.hpp"
+
+/**
+ * @file alteriom_sensor_package.hpp
+ * @brief Alteriom custom package definitions for painlessMesh
+ *
+ * TIME FIELD NAMING CONVENTION
+ * ============================
+ *
+ * For consistency and developer convenience, all time-based configuration
+ * fields in Alteriom packages follow a standardized naming convention:
+ *
+ * INTERNAL STORAGE:
+ * - Always use milliseconds (uint32_t)
+ * - Use descriptive field names WITHOUT unit suffixes
+ *   Examples: sensorReadInterval, transmissionInterval
+ *
+ * JSON SERIALIZATION:
+ * - ALWAYS provide BOTH millisecond and second variants:
+ *   - {fieldname}_ms : The value in milliseconds (uint32_t)
+ *   - {fieldname}_s  : The value in seconds (uint32_t, calculated as ms/1000)
+ *
+ * JSON DESERIALIZATION:
+ * - Read from the _ms variant (milliseconds are the source of truth)
+ * - The _s variant is provided for consumer convenience but not used for input
+ *
+ * EXAMPLE:
+ * ```cpp
+ * // C++ field declaration
+ * uint32_t sensorReadInterval = 0;  // Internal storage in milliseconds
+ *
+ * // JSON serialization (in addTo method)
+ * sensors["read_interval_ms"] = sensorReadInterval;           // 30000
+ * sensors["read_interval_s"] = sensorReadInterval / 1000;     // 30
+ *
+ * // JSON deserialization (in constructor)
+ * sensorReadInterval = sensors["read_interval_ms"] | 0;
+ * ```
+ *
+ * BENEFITS:
+ * - Consumer Convenience: No mental overhead for unit conversion
+ * - Flexibility: Consumers choose the unit appropriate for their context
+ * - Self-Documenting: Field names clearly indicate available units
+ * - Precision: Millisecond precision preserved, seconds for readability
+ * - Consistency: Predictable pattern across all time-based fields
+ *
+ * WHEN TO APPLY:
+ * - Use this convention for ALL time-based configuration/interval fields
+ * - Applies to fields typically >= 1000ms (1 second)
+ * - Examples: intervals, timeouts, durations, delays
+ * - Does NOT apply to timestamps (which should remain in seconds as per Unix
+ * convention)
+ *
+ *
+ * JSON STRUCTURE NESTING GUIDELINES
+ * ==================================
+ *
+ * Alteriom packages follow consistent patterns for organizing configuration
+ * data in JSON structures. This ensures maintainability and predictability
+ * across the API.
+ *
+ * IMPORTANT: As of PR #37, ALL configuration sections always serialize with
+ * default values, providing predictable JSON structure. Consumers no longer
+ * need to check for key existence. Default values (0, false, "") indicate "not
+ * configured" state.
+ *
+ * See docs/API_DESIGN_GUIDELINES.md for comprehensive documentation.
+ *
+ * QUICK REFERENCE:
+ *
+ * Use FLAT structure (simple key-value pairs) when:
+ * - Section has < 4 total fields
+ * - No clear logical subsystems
+ * - Simple value types
+ *
+ * Use NESTED structure (grouped subsections) when:
+ * - 3+ fields belong to same logical subsystem
+ * - Clear semantic grouping exists
+ * - Future extensibility anticipated
+ * - Subsystem has distinct meaning
+ *
+ * CURRENT STRUCTURE PATTERNS:
+ *
+ * Flat Sections:
+ * - display_config: enabled, brightness, timeout (3 fields, no subsystems)
+ * - power_config: deep_sleep_enabled, deep_sleep_interval, battery_percent (3
+ * fields)
+ * - mqtt_retry: retry settings and backoff parameters (9 fields, cohesive
+ * purpose)
+ * - ota: enabled, server, port (3 fields)
+ * - encoding: compression and format settings (3 fields)
+ *
+ * Nested Sections:
+ * - sensors.calibration: temperature_offset, humidity_offset, pressure_offset
+ *   (Rationale: Calibration is distinct subsystem, optional, semantically
+ * separate)
+ * - organization: organizationId, customerId, deviceGroup, device_name, etc.
+ *   (Rationale: Optional metadata subsystem, may not be present on all devices)
+ *
+ * EXAMPLES:
+ *
+ * Flat structure:
+ * ```json
+ * "display_config": {
+ *   "enabled": true,
+ *   "brightness": 128,
+ *   "timeout_ms": 30000,
+ *   "timeout_s": 30
+ * }
+ * ```
+ *
+ * Nested structure:
+ * ```json
+ * "sensors": {
+ *   "read_interval_ms": 30000,
+ *   "read_interval_s": 30,
+ *   "calibration": {
+ *     "temperature_offset": 0.5,
+ *     "humidity_offset": -2.0,
+ *     "pressure_offset": 0.0
+ *   }
+ * }
+ * ```
+ *
+ * DECISION RULE:
+ * When in doubt, prefer flat structures. Nesting should provide clear
+ * organizational or extensibility benefits to justify the added complexity.
+ */
+
+namespace alteriom {
+
+/**
+ * @brief Sensor data package for broadcasting environmental measurements
+ *
+ * This package is designed for Alteriom's IoT sensor network requirements,
+ * allowing nodes to share environmental data across the mesh.
+ */
+class SensorPackage : public painlessmesh::plugin::BroadcastPackage {
+ public:
+  // Temperature in Celsius
+  double temperature = 0.0;
+  // Relative humidity percentage
+  double humidity = 0.0;
+  // Atmospheric pressure in hPa
+  double pressure = 0.0;
+  // Unique sensor identifier
+  uint32_t sensorId = 0;
+  // Unix timestamp of measurement
+  uint32_t timestamp = 0;
+  // Battery level percentage
+  uint8_t batteryLevel = 0;
+
+  // MQTT Schema v0.7.3+ message_type for faster classification
+  uint16_t messageType = 200;  // SENSOR_DATA
+
+  // Type ID 200 for Alteriom sensors
+  SensorPackage() : BroadcastPackage(200) {}
+
+  SensorPackage(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
+    temperature = jsonObj["temp"];
+    humidity = jsonObj["hum"];
+    pressure = jsonObj["press"];
+    sensorId = jsonObj["sid"];
+    timestamp = jsonObj["ts"];
+    batteryLevel = jsonObj["bat"];
+    messageType = jsonObj["message_type"] | 200;
+  }
+
+  JsonObject addTo(JsonObject&& jsonObj) const {
+    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
+    jsonObj["temp"] = temperature;
+    jsonObj["hum"] = humidity;
+    jsonObj["press"] = pressure;
+    jsonObj["sid"] = sensorId;
+    jsonObj["ts"] = timestamp;
+    jsonObj["bat"] = batteryLevel;
+    jsonObj["message_type"] = messageType;
+    return jsonObj;
+  }
+
+#if ARDUINOJSON_VERSION_MAJOR < 7
+  size_t jsonObjectSize() const { return JSON_OBJECT_SIZE(noJsonFields + 6); }
+#endif
+};
+
+/**
+ * @brief Command package for controlling Alteriom devices
+ *
+ * Single-destination package for sending specific commands to individual nodes.
+ */
+class CommandPackage : public painlessmesh::plugin::SinglePackage {
+ public:
+  uint8_t command = 0;        // Command type
+  uint32_t targetDevice = 0;  // Target device ID
+  TSTRING parameters = "";    // Command parameters as JSON string
+  uint32_t commandId = 0;     // Unique command identifier for tracking
+
+  // MQTT Schema v0.7.3+ message_type for faster classification
+  uint16_t messageType = 400;  // COMMAND
+
+  CommandPackage()
+      : SinglePackage(400) {}  // Type ID 400 (COMMAND per mqtt-schema v0.7.3+)
+
+  CommandPackage(JsonObject jsonObj) : SinglePackage(jsonObj) {
+    command = jsonObj["cmd"];
+    targetDevice = jsonObj["target"];
+    parameters = jsonObj["params"].as<TSTRING>();
+    commandId = jsonObj["cid"];
+    messageType = jsonObj["message_type"] | 400;
+  }
+
+  JsonObject addTo(JsonObject&& jsonObj) const {
+    jsonObj = SinglePackage::addTo(std::move(jsonObj));
+    jsonObj["cmd"] = command;
+    jsonObj["target"] = targetDevice;
+    jsonObj["params"] = parameters;
+    jsonObj["cid"] = commandId;
+    jsonObj["message_type"] = messageType;
+    return jsonObj;
+  }
+
+#if ARDUINOJSON_VERSION_MAJOR < 7
+  size_t jsonObjectSize() const {
+    return JSON_OBJECT_SIZE(noJsonFields + 4) + parameters.length();
+  }
+#endif
+};
+
+/**
+ * @brief Status report package for device health monitoring
+ *
+ * BOOLEAN FIELD NAMING CONVENTION
+ * ================================
+ *
+ * This package follows a standardized naming convention for boolean fields
+ * to improve code clarity and reduce ambiguity. See
+ * docs/BOOLEAN_NAMING_CONVENTION.md for complete documentation.
+ *
+ * Three patterns are used:
+ *
+ * 1. *Set suffix: Configuration data has been provided
+ *    Example: deviceSecretSet = true means secret is configured
+ *    Does NOT indicate if feature is enabled or working
+ *
+ * 2. *Enabled suffix: Feature is currently active/turned on
+ *    Example: displayEnabled = true means display feature is active
+ *    Independent of whether required configuration exists
+ *
+ * 3. is* prefix or *Connected: Current runtime state
+ *    Example: mqttConnected = true means currently connected
+ *    Reflects actual runtime conditions, not configuration
+ *
+ * A feature may have both *Set and *Enabled fields:
+ * - otaServerSet=true, otaEnabled=false: Server configured but feature disabled
+ * - otaServerSet=false, otaEnabled=true: Feature enabled but no server
+ * (invalid)
+ * - otaServerSet=true, otaEnabled=true: Fully configured and active
+ */
+class StatusPackage : public painlessmesh::plugin::BroadcastPackage {
+ public:
+  uint8_t deviceStatus = 0;      // Device status flags
+  uint32_t uptime = 0;           // Device uptime in seconds
+  uint16_t freeMemory = 0;       // Free memory in KB
+  uint8_t wifiStrength = 0;      // WiFi signal strength
+  TSTRING firmwareVersion = "";  // Current firmware version
+
+  // Command response fields (for MQTT bridge)
+  uint32_t responseToCommand = 0;  // CommandId this is responding to
+  TSTRING responseMessage = "";    // Success/error message
+
+  // Organization metadata (Build 8052 - Phase 2.7)
+  TSTRING organizationId = "";  // Organization identifier
+  TSTRING customerId = "";      // Customer identifier
+  TSTRING deviceGroup = "";     // Device group/category
+  TSTRING deviceName = "";      // Device name
+  TSTRING deviceLocation = "";  // Device location
+  bool deviceSecretSet =
+      false;  // *Set: Has device secret been configured? (not enabled/disabled)
+
+  // Sensor configuration (Build 8057 - Gateway format compatibility)
+  // Note: Time fields follow Alteriom time field naming convention (see file
+  // header) Stored in milliseconds, serialized as both _ms and _s variants
+  uint32_t sensorReadInterval = 0;    // Sensor read interval in milliseconds
+  uint32_t transmissionInterval = 0;  // Transmission interval in milliseconds
+  double tempOffset = 0.0;            // Temperature calibration offset
+  double humidityOffset = 0.0;        // Humidity calibration offset
+  double pressureOffset = 0.0;        // Pressure calibration offset
+
+  // Sensor inventory (Build 8057 - Separate from config to avoid collision)
+  uint8_t sensorCount = 0;     // Number of sensors attached
+  uint8_t sensorTypeMask = 0;  // Bitmask of sensor types present
+
+  // Display configuration
+  bool displayEnabled =
+      false;  // *Enabled: Is display feature currently active?
+  uint8_t displayBrightness = 0;  // Display brightness (0-255)
+  uint32_t displayTimeout = 0;    // Display timeout in milliseconds
+
+  // Power configuration
+  bool deepSleepEnabled =
+      false;  // *Enabled: Is deep sleep mode currently active?
+  uint32_t deepSleepInterval = 0;  // Deep sleep interval in milliseconds
+  uint8_t batteryPercent = 0;      // Battery percentage (0-100)
+
+  // MQTT retry configuration
+  uint8_t mqttMaxRetryAttempts = 0;   // Maximum retry attempts
+  uint32_t mqttCircuitBreakerMs = 0;  // Circuit breaker timeout in milliseconds
+  bool mqttHourlyRetryEnabled =
+      false;                        // *Enabled: Is hourly retry feature active?
+  uint32_t mqttInitialRetryMs = 0;  // Initial retry delay in milliseconds
+  uint32_t mqttMaxRetryMs = 0;      // Maximum retry delay in milliseconds
+  float mqttBackoffMultiplier =
+      0.0;  // Backoff multiplier for exponential backoff
+
+  // MQTT Schema v0.7.3+ message_type for faster classification
+  uint16_t messageType = 202;  // SENSOR_STATUS
+
+  StatusPackage() : BroadcastPackage(202) {}  // Type ID 202 for Alteriom status
+
+  StatusPackage(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
+    deviceStatus = jsonObj["status"];
+    uptime = jsonObj["uptime"];
+    freeMemory = jsonObj["mem"];
+    wifiStrength = jsonObj["wifi"];
+    firmwareVersion = jsonObj["fw"].as<TSTRING>();
+    responseToCommand = jsonObj["respTo"] | 0;
+    responseMessage = jsonObj["respMsg"].as<TSTRING>();
+
+    // Deserialize organization metadata (camelCase format)
+    if (jsonObj["organization"].is<JsonObject>()) {
+      JsonObject org = jsonObj["organization"];
+      organizationId = org["organizationId"].as<TSTRING>();
+      customerId = org["customerId"].as<TSTRING>();
+      deviceGroup = org["deviceGroup"].as<TSTRING>();
+      deviceName = org["device_name"].as<TSTRING>();
+      deviceLocation = org["device_location"].as<TSTRING>();
+      deviceSecretSet = org["device_secret_set"] | false;
+    }
+
+    // Deserialize sensor configuration (Build 8057 - Gateway format)
+    if (jsonObj["sensors"].is<JsonObject>()) {
+      JsonObject sensors = jsonObj["sensors"];
+      sensorReadInterval = sensors["read_interval_ms"] | 0;
+      transmissionInterval = sensors["transmission_interval_ms"] | 0;
+
+      if (sensors["calibration"].is<JsonObject>()) {
+        JsonObject calibration = sensors["calibration"];
+        tempOffset = calibration["temperature_offset"] | 0.0;
+        humidityOffset = calibration["humidity_offset"] | 0.0;
+        pressureOffset = calibration["pressure_offset"] | 0.0;
+      }
+    }
+
+    // Deserialize sensor inventory (Build 8057 - Separate key)
+    if (jsonObj["sensor_inventory"].is<JsonObject>()) {
+      JsonObject sensorInventory = jsonObj["sensor_inventory"];
+      sensorCount = sensorInventory["count"] | 0;
+      sensorTypeMask = sensorInventory["type_mask"] | 0;
+    }
+
+    // Deserialize display configuration (with backward compatibility)
+    if (jsonObj["display_config"].is<JsonObject>()) {
+      JsonObject displayConfig = jsonObj["display_config"];
+      displayEnabled = displayConfig["enabled"] | false;
+      displayBrightness = displayConfig["brightness"] | 0;
+      // Support both old and new field names for backward compatibility
+      displayTimeout =
+          displayConfig["timeout_ms"] | displayConfig["timeout"] | 0;
+    }
+
+    // Deserialize power configuration (with backward compatibility)
+    if (jsonObj["power_config"].is<JsonObject>()) {
+      JsonObject powerConfig = jsonObj["power_config"];
+      deepSleepEnabled = powerConfig["deep_sleep_enabled"] | false;
+      // Support both old and new field names for backward compatibility
+      deepSleepInterval = powerConfig["deep_sleep_interval_ms"] |
+                          powerConfig["deep_sleep_interval"] | 0;
+      batteryPercent = powerConfig["battery_percent"] | 0;
+    }
+
+    // Deserialize MQTT retry configuration
+    if (jsonObj["mqtt_retry"].is<JsonObject>()) {
+      JsonObject mqttRetry = jsonObj["mqtt_retry"];
+      mqttMaxRetryAttempts = mqttRetry["max_attempts"] | 0;
+      mqttCircuitBreakerMs = mqttRetry["circuit_breaker_ms"] | 0;
+      mqttHourlyRetryEnabled = mqttRetry["hourly_retry_enabled"] | false;
+      mqttInitialRetryMs = mqttRetry["initial_retry_ms"] | 0;
+      mqttMaxRetryMs = mqttRetry["max_retry_ms"] | 0;
+      mqttBackoffMultiplier = mqttRetry["backoff_multiplier"] | 0.0;
+    }
+
+    // Deserialize message_type field
+    messageType = jsonObj["message_type"] | 202;
+  }
+
+  JsonObject addTo(JsonObject&& jsonObj) const {
+    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
+    jsonObj["status"] = deviceStatus;
+    jsonObj["uptime"] = uptime;
+    jsonObj["mem"] = freeMemory;
+    jsonObj["wifi"] = wifiStrength;
+    jsonObj["fw"] = firmwareVersion;
+    if (responseToCommand > 0) {
+      jsonObj["respTo"] = responseToCommand;
+      jsonObj["respMsg"] = responseMessage;
+    }
+
+    // Serialize organization metadata (mixed case per MQTT Schema v0.7.2)
+    // Always serialize to ensure predictable JSON structure
+    JsonObject org = jsonObj["organization"].to<JsonObject>();
+    org["organizationId"] = organizationId;
+    org["customerId"] = customerId;
+    org["deviceGroup"] = deviceGroup;
+    org["device_name"] = deviceName;
+    org["device_location"] = deviceLocation;
+    org["device_secret_set"] = deviceSecretSet;
+
+    // Serialize sensor configuration (Build 8057 - Match gateway format)
+    // Always serialize to ensure predictable JSON structure
+    JsonObject sensors = jsonObj["sensors"].to<JsonObject>();
+    sensors["read_interval_ms"] = sensorReadInterval;
+    sensors["read_interval_s"] = sensorReadInterval / 1000;
+    sensors["transmission_interval_ms"] = transmissionInterval;
+    sensors["transmission_interval_s"] = transmissionInterval / 1000;
+
+    // Nested calibration object - always serialize for consistency
+    JsonObject calibration = sensors["calibration"].to<JsonObject>();
+    calibration["temperature_offset"] = tempOffset;
+    calibration["humidity_offset"] = humidityOffset;
+    calibration["pressure_offset"] = pressureOffset;
+
+    // Serialize sensor inventory (Build 8057 - Separate key to avoid collision)
+    // Always serialize to ensure predictable JSON structure
+    JsonObject sensorInventory = jsonObj["sensor_inventory"].to<JsonObject>();
+    sensorInventory["count"] = sensorCount;
+    sensorInventory["type_mask"] = sensorTypeMask;
+
+    // Serialize display configuration (with both _ms and _s variants)
+    // Always serialize to ensure predictable JSON structure
+    JsonObject displayConfig = jsonObj["display_config"].to<JsonObject>();
+    displayConfig["enabled"] = displayEnabled;
+    displayConfig["brightness"] = displayBrightness;
+    displayConfig["timeout_ms"] = displayTimeout;
+    displayConfig["timeout_s"] = displayTimeout / 1000;
+
+    // Serialize power configuration (with both _ms and _s variants)
+    // Always serialize to ensure predictable JSON structure
+    JsonObject powerConfig = jsonObj["power_config"].to<JsonObject>();
+    powerConfig["deep_sleep_enabled"] = deepSleepEnabled;
+    powerConfig["deep_sleep_interval_ms"] = deepSleepInterval;
+    powerConfig["deep_sleep_interval_s"] = deepSleepInterval / 1000;
+    powerConfig["battery_percent"] = batteryPercent;
+
+    // Serialize MQTT retry configuration (with both _ms and _s variants)
+    // Always serialize to ensure predictable JSON structure
+    JsonObject mqttRetry = jsonObj["mqtt_retry"].to<JsonObject>();
+    mqttRetry["max_attempts"] = mqttMaxRetryAttempts;
+    mqttRetry["circuit_breaker_ms"] = mqttCircuitBreakerMs;
+    mqttRetry["circuit_breaker_s"] = mqttCircuitBreakerMs / 1000;
+    mqttRetry["hourly_retry_enabled"] = mqttHourlyRetryEnabled;
+    mqttRetry["initial_retry_ms"] = mqttInitialRetryMs;
+    mqttRetry["initial_retry_s"] = mqttInitialRetryMs / 1000;
+    mqttRetry["max_retry_ms"] = mqttMaxRetryMs;
+    mqttRetry["max_retry_s"] = mqttMaxRetryMs / 1000;
+    mqttRetry["backoff_multiplier"] = mqttBackoffMultiplier;
+
+    // Serialize message_type field
+    jsonObj["message_type"] = messageType;
+
+    return jsonObj;
+  }
+
+#if ARDUINOJSON_VERSION_MAJOR < 7
+  size_t jsonObjectSize() const {
+    size_t size = JSON_OBJECT_SIZE(noJsonFields + 7) +
+                  firmwareVersion.length() + responseMessage.length();
+
+    // Always add organization object size for predictable structure
+    size += JSON_OBJECT_SIZE(6) + organizationId.length() +
+            customerId.length() + deviceGroup.length() + deviceName.length() +
+            deviceLocation.length();
+
+    // Always add sensor configuration object size (Build 8057)
+    // sensors object with read_interval_ms, read_interval_s,
+    // transmission_interval_ms, transmission_interval_s, calibration
+    size += JSON_OBJECT_SIZE(5);
+    // calibration nested object - always included
+    size += JSON_OBJECT_SIZE(3);
+
+    // Always add sensor inventory object size (Build 8057)
+    size += JSON_OBJECT_SIZE(
+        2);  // sensor_inventory object with count and type_mask
+
+    // Always add display configuration object size
+    // display_config object with enabled, brightness, timeout_ms, timeout_s
+    size += JSON_OBJECT_SIZE(4);
+
+    // Always add power configuration object size
+    // power_config object with deep_sleep_enabled, deep_sleep_interval_ms,
+    // deep_sleep_interval_s, battery_percent
+    size += JSON_OBJECT_SIZE(4);
+
+    // Always add MQTT retry configuration object size
+    // mqtt_retry object with max_attempts, circuit_breaker_ms,
+    // circuit_breaker_s, hourly_retry_enabled, initial_retry_ms,
+    // initial_retry_s, max_retry_ms, max_retry_s, backoff_multiplier
+    size +=
+        JSON_OBJECT_SIZE(9) + 10;  // Extra space for backoff_multiplier string
+
+    return size;
+  }
+#endif
+};
+
+/**
+ * @brief Enhanced status package with comprehensive health metrics (Phase 1)
+ *
+ * This is an extended version of StatusPackage that includes additional
+ * mesh statistics, performance metrics, and alerting capabilities.
+ * Type ID 203 is used to distinguish from the basic StatusPackage (202).
+ */
+class EnhancedStatusPackage : public painlessmesh::plugin::BroadcastPackage {
+ public:
+  // Device Health (from original StatusPackage)
+  uint8_t deviceStatus = 0;      // Device status flags
+  uint32_t uptime = 0;           // Device uptime in seconds
+  uint16_t freeMemory = 0;       // Free memory in KB
+  uint8_t wifiStrength = 0;      // WiFi signal strength
+  TSTRING firmwareVersion = "";  // Current firmware version
+  TSTRING firmwareMD5 = "";      // Firmware hash for OTA verification
+
+  // Mesh Statistics
+  uint16_t nodeCount = 0;         // Number of known nodes in mesh
+  uint8_t connectionCount = 0;    // Number of direct connections
+  uint32_t messagesReceived = 0;  // Total messages received
+  uint32_t messagesSent = 0;      // Total messages sent
+  uint32_t messagesDropped = 0;   // Total messages dropped/failed
+
+  // Performance Metrics
+  uint16_t avgLatency = 0;     // Average message latency in ms
+  uint8_t packetLossRate = 0;  // Packet loss rate percentage (0-100)
+  uint16_t throughput = 0;     // Network throughput in bytes/sec
+
+  // Warnings/Alerts
+  uint8_t alertFlags = 0;  // Bit flags for various alert conditions
+  TSTRING lastError = "";  // Last error message for diagnostics
+
+  EnhancedStatusPackage()
+      : BroadcastPackage(604) {
+  }  // Type ID 604 for enhanced status (MESH_STATUS per mqtt-schema v0.7.2+)
+
+  EnhancedStatusPackage(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
+    deviceStatus = jsonObj["status"];
+    uptime = jsonObj["uptime"];
+    freeMemory = jsonObj["mem"];
+    wifiStrength = jsonObj["wifi"];
+    firmwareVersion = jsonObj["fw"].as<TSTRING>();
+    firmwareMD5 = jsonObj["fwMD5"].as<TSTRING>();
+
+    nodeCount = jsonObj["nodes"];
+    connectionCount = jsonObj["conns"];
+    messagesReceived = jsonObj["msgRx"];
+    messagesSent = jsonObj["msgTx"];
+    messagesDropped = jsonObj["msgDrop"];
+
+    avgLatency = jsonObj["latency"];
+    packetLossRate = jsonObj["loss"];
+    throughput = jsonObj["throughput"];
+
+    alertFlags = jsonObj["alerts"];
+    lastError = jsonObj["lastErr"].as<TSTRING>();
+  }
+
+  JsonObject addTo(JsonObject&& jsonObj) const {
+    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
+
+    // Device Health
+    jsonObj["status"] = deviceStatus;
+    jsonObj["uptime"] = uptime;
+    jsonObj["mem"] = freeMemory;
+    jsonObj["wifi"] = wifiStrength;
+    jsonObj["fw"] = firmwareVersion;
+    jsonObj["fwMD5"] = firmwareMD5;
+
+    // Mesh Statistics
+    jsonObj["nodes"] = nodeCount;
+    jsonObj["conns"] = connectionCount;
+    jsonObj["msgRx"] = messagesReceived;
+    jsonObj["msgTx"] = messagesSent;
+    jsonObj["msgDrop"] = messagesDropped;
+
+    // Performance Metrics
+    jsonObj["latency"] = avgLatency;
+    jsonObj["loss"] = packetLossRate;
+    jsonObj["throughput"] = throughput;
+
+    // Alerts
+    jsonObj["alerts"] = alertFlags;
+    jsonObj["lastErr"] = lastError;
+
+    return jsonObj;
+  }
+
+#if ARDUINOJSON_VERSION_MAJOR < 7
+  size_t jsonObjectSize() const {
+    return JSON_OBJECT_SIZE(noJsonFields + 18) + firmwareVersion.length() +
+           firmwareMD5.length() + lastError.length();
+  }
+#endif
+};
+
+/**
+ * @brief Detailed performance metrics package for monitoring (Phase 2)
+ *
+ * Provides comprehensive performance data including CPU usage, memory trends,
+ * network throughput, and other metrics useful for dashboards and monitoring.
+ * Type ID 204 for Alteriom metrics.
+ */
+class MetricsPackage : public painlessmesh::plugin::BroadcastPackage {
+ public:
+  // CPU and Processing
+  uint8_t cpuUsage = 0;         // CPU usage percentage (0-100)
+  uint32_t loopIterations = 0;  // Loop iterations per second
+  uint16_t taskQueueSize = 0;   // Number of pending tasks
+
+  // Memory Metrics
+  uint32_t freeHeap = 0;           // Free heap memory in bytes
+  uint32_t minFreeHeap = 0;        // Minimum free heap since boot
+  uint32_t heapFragmentation = 0;  // Heap fragmentation percentage
+  uint32_t maxAllocHeap = 0;       // Largest allocatable block
+
+  // Network Performance
+  uint32_t bytesReceived = 0;      // Total bytes received
+  uint32_t bytesSent = 0;          // Total bytes sent
+  uint16_t packetsReceived = 0;    // Total packets received
+  uint16_t packetsSent = 0;        // Total packets sent
+  uint16_t packetsDropped = 0;     // Packets dropped
+  uint16_t currentThroughput = 0;  // Current throughput in bytes/sec
+
+  // Timing and Latency
+  uint32_t avgResponseTime = 0;  // Average response time in microseconds
+  uint32_t maxResponseTime = 0;  // Maximum response time in microseconds
+  uint16_t avgMeshLatency = 0;   // Average mesh latency in milliseconds
+
+  // Connection Quality
+  uint8_t connectionQuality = 0;  // Overall connection quality (0-100)
+  int8_t wifiRSSI = 0;            // WiFi RSSI in dBm
+
+  // Collection metadata
+  uint32_t collectionTimestamp = 0;  // When metrics were collected
+  uint32_t collectionInterval = 0;   // Interval between collections in ms
+
+  // MQTT Schema v0.7.2+ message_type for faster classification
+  uint16_t messageType = 204;  // SENSOR_METRICS (aligns with schema v0.7.2+)
+
+  MetricsPackage() : BroadcastPackage(204) {}
+
+  MetricsPackage(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
+    cpuUsage = jsonObj["cpu"];
+    loopIterations = jsonObj["loops"];
+    taskQueueSize = jsonObj["tasks"];
+
+    freeHeap = jsonObj["heap"];
+    minFreeHeap = jsonObj["minHeap"];
+    heapFragmentation = jsonObj["fragHeap"];
+    maxAllocHeap = jsonObj["maxHeap"];
+
+    bytesReceived = jsonObj["bytesRx"];
+    bytesSent = jsonObj["bytesTx"];
+    packetsReceived = jsonObj["pktsRx"];
+    packetsSent = jsonObj["pktsTx"];
+    packetsDropped = jsonObj["pktsDrop"];
+    currentThroughput = jsonObj["throughput"];
+
+    avgResponseTime = jsonObj["avgResp"];
+    maxResponseTime = jsonObj["maxResp"];
+    avgMeshLatency = jsonObj["avgLat"];
+
+    connectionQuality = jsonObj["connQual"];
+    wifiRSSI = jsonObj["rssi"];
+
+    collectionTimestamp = jsonObj["ts"];
+    collectionInterval = jsonObj["interval"];
+    messageType = jsonObj["message_type"] | 204;
+  }
+
+  JsonObject addTo(JsonObject&& jsonObj) const {
+    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
+
+    // CPU and Processing
+    jsonObj["cpu"] = cpuUsage;
+    jsonObj["loops"] = loopIterations;
+    jsonObj["tasks"] = taskQueueSize;
+
+    // Memory Metrics
+    jsonObj["heap"] = freeHeap;
+    jsonObj["minHeap"] = minFreeHeap;
+    jsonObj["fragHeap"] = heapFragmentation;
+    jsonObj["maxHeap"] = maxAllocHeap;
+
+    // Network Performance
+    jsonObj["bytesRx"] = bytesReceived;
+    jsonObj["bytesTx"] = bytesSent;
+    jsonObj["pktsRx"] = packetsReceived;
+    jsonObj["pktsTx"] = packetsSent;
+    jsonObj["pktsDrop"] = packetsDropped;
+    jsonObj["throughput"] = currentThroughput;
+
+    // Timing and Latency
+    jsonObj["avgResp"] = avgResponseTime;
+    jsonObj["maxResp"] = maxResponseTime;
+    jsonObj["avgLat"] = avgMeshLatency;
+
+    // Connection Quality
+    jsonObj["connQual"] = connectionQuality;
+    jsonObj["rssi"] = wifiRSSI;
+
+    // Metadata
+    jsonObj["ts"] = collectionTimestamp;
+    jsonObj["interval"] = collectionInterval;
+    jsonObj["message_type"] = messageType;  // MQTT Schema v0.7.1+
+
+    return jsonObj;
+  }
+
+#if ARDUINOJSON_VERSION_MAJOR < 7
+  size_t jsonObjectSize() const { return JSON_OBJECT_SIZE(noJsonFields + 22); }
+#endif
+};
+
+/**
+ * @brief Health check package for proactive problem detection (Phase 2)
+ *
+ * Provides early warning indicators and health status to detect issues
+ * before they cause failures. Used for predictive maintenance and alerting.
+ * Type ID 605 for Alteriom health checks (MESH_METRICS per mqtt-schema
+ * v0.7.2+).
+ */
+class HealthCheckPackage : public painlessmesh::plugin::BroadcastPackage {
+ public:
+  // Overall Health Status (0=critical, 1=warning, 2=healthy)
+  uint8_t healthStatus = 2;
+
+  // Problem Indicators (bit flags)
+  uint16_t problemFlags = 0;  // Bit flags for specific problems
+  /*
+   * Problem flag bits:
+   * 0x0001 - Low memory warning
+   * 0x0002 - High CPU usage
+   * 0x0004 - Connection instability
+   * 0x0008 - High packet loss
+   * 0x0010 - Network congestion
+   * 0x0020 - Low battery (if applicable)
+   * 0x0040 - Thermal warning
+   * 0x0080 - Mesh partition detected
+   * 0x0100 - OTA in progress
+   * 0x0200 - Configuration error
+   */
+
+  // Memory Health
+  uint8_t memoryHealth = 100;  // Memory health score (0-100)
+  uint32_t memoryTrend = 0;    // Bytes/hour memory loss (for leak detection)
+
+  // Network Health
+  uint8_t networkHealth = 100;    // Network health score (0-100)
+  uint8_t packetLossPercent = 0;  // Packet loss percentage
+  uint8_t reconnectionCount = 0;  // Reconnections in last hour
+
+  // Performance Health
+  uint8_t performanceHealth = 100;  // Performance health score (0-100)
+  uint32_t missedDeadlines = 0;     // Missed task deadlines
+  uint16_t maxLoopTime = 0;         // Maximum loop execution time in ms
+
+  // Environmental (if sensors available)
+  int8_t temperature = 0;           // Device temperature in Celsius
+  uint8_t temperatureHealth = 100;  // Temperature health score
+
+  // Uptime and Stability
+  uint32_t uptime = 0;            // Uptime in seconds
+  uint16_t crashCount = 0;        // Crash/restart count
+  uint32_t lastRebootReason = 0;  // Last reboot reason code
+
+  // Predictive indicators
+  uint16_t estimatedTimeToFailure =
+      0;                         // Estimated hours until failure (0=unknown)
+  TSTRING recommendations = "";  // Recommended actions
+
+  // Check metadata
+  uint32_t checkTimestamp = 0;  // When check was performed
+  uint32_t nextCheckDue = 0;    // When next check is due
+
+  // MQTT Schema v0.7.2+ message_type for faster classification
+  uint16_t messageType = 605;  // MESH_METRICS type code (mesh performance
+                               // health per mqtt-schema v0.7.2+)
+
+  HealthCheckPackage() : BroadcastPackage(605) {}
+
+  HealthCheckPackage(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
+    healthStatus = jsonObj["health"];
+    problemFlags = jsonObj["problems"];
+
+    memoryHealth = jsonObj["memHealth"];
+    memoryTrend = jsonObj["memTrend"];
+
+    networkHealth = jsonObj["netHealth"];
+    packetLossPercent = jsonObj["loss"];
+    reconnectionCount = jsonObj["reconn"];
+
+    performanceHealth = jsonObj["perfHealth"];
+    missedDeadlines = jsonObj["missed"];
+    maxLoopTime = jsonObj["maxLoop"];
+
+    temperature = jsonObj["temp"];
+    temperatureHealth = jsonObj["tempHealth"];
+
+    uptime = jsonObj["uptime"];
+    crashCount = jsonObj["crashes"];
+    lastRebootReason = jsonObj["reboot"];
+
+    estimatedTimeToFailure = jsonObj["ettf"];
+    recommendations = jsonObj["recommend"].as<TSTRING>();
+
+    checkTimestamp = jsonObj["ts"];
+    nextCheckDue = jsonObj["nextCheck"];
+    messageType = jsonObj["message_type"] | 605;
+  }
+
+  JsonObject addTo(JsonObject&& jsonObj) const {
+    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
+
+    jsonObj["health"] = healthStatus;
+    jsonObj["problems"] = problemFlags;
+
+    jsonObj["memHealth"] = memoryHealth;
+    jsonObj["memTrend"] = memoryTrend;
+
+    jsonObj["netHealth"] = networkHealth;
+    jsonObj["loss"] = packetLossPercent;
+    jsonObj["reconn"] = reconnectionCount;
+
+    jsonObj["perfHealth"] = performanceHealth;
+    jsonObj["missed"] = missedDeadlines;
+    jsonObj["maxLoop"] = maxLoopTime;
+
+    jsonObj["temp"] = temperature;
+    jsonObj["tempHealth"] = temperatureHealth;
+
+    jsonObj["uptime"] = uptime;
+    jsonObj["crashes"] = crashCount;
+    jsonObj["reboot"] = lastRebootReason;
+
+    jsonObj["ettf"] = estimatedTimeToFailure;
+    jsonObj["recommend"] = recommendations;
+
+    jsonObj["ts"] = checkTimestamp;
+    jsonObj["nextCheck"] = nextCheckDue;
+    jsonObj["message_type"] = messageType;  // MQTT Schema v0.7.1+
+
+    return jsonObj;
+  }
+
+#if ARDUINOJSON_VERSION_MAJOR < 7
+  size_t jsonObjectSize() const {
+    return JSON_OBJECT_SIZE(noJsonFields + 20) + recommendations.length();
+  }
+#endif
+};
+
+/**
+ * @brief Mesh node information for a single node
+ */
+struct MeshNodeInfo {
+  uint32_t nodeId = 0;        // Node identifier
+  uint8_t status = 0;         // 0=offline, 1=online, 2=unreachable
+  uint32_t lastSeen = 0;      // Unix timestamp of last communication
+  int8_t signalStrength = 0;  // RSSI in dBm
+};
+
+/**
+ * @brief Mesh node list package (Type 600 - MESH_NODE_LIST)
+ *
+ * Provides list of all nodes in the mesh network with their status.
+ * Type ID 600 for MESH_NODE_LIST per mqtt-schema v0.7.2+.
+ */
+class MeshNodeListPackage : public painlessmesh::plugin::BroadcastPackage {
+ public:
+  // Array of node information (max 50 nodes)
+  MeshNodeInfo nodes[50];
+  uint8_t nodeCount = 0;  // Actual number of nodes
+  TSTRING meshId = "";    // Mesh network identifier
+
+  // MQTT Schema v0.7.2+ message_type
+  uint16_t messageType = 600;  // MESH_NODE_LIST
+
+  MeshNodeListPackage() : BroadcastPackage(600) {}
+
+  MeshNodeListPackage(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
+    JsonArray nodesArray = jsonObj["nodes"];
+    nodeCount = nodesArray.size();
+    if (nodeCount > 50) nodeCount = 50;
+
+    for (uint8_t i = 0; i < nodeCount; i++) {
+      JsonObject node = nodesArray[i];
+      nodes[i].nodeId = node["nodeId"];
+      nodes[i].status = node["status"];
+      nodes[i].lastSeen = node["lastSeen"];
+      nodes[i].signalStrength = node["rssi"];
+    }
+
+    meshId = jsonObj["meshId"].as<TSTRING>();
+    messageType = jsonObj["message_type"] | 600;
+  }
+
+  JsonObject addTo(JsonObject&& jsonObj) const {
+    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
+
+    JsonArray nodesArray = jsonObj["nodes"].to<JsonArray>();
+    for (uint8_t i = 0; i < nodeCount; i++) {
+      JsonObject node = nodesArray.add<JsonObject>();
+      node["nodeId"] = nodes[i].nodeId;
+      node["status"] = nodes[i].status;
+      node["lastSeen"] = nodes[i].lastSeen;
+      node["rssi"] = nodes[i].signalStrength;
+    }
+
+    jsonObj["nodeCount"] = nodeCount;
+    jsonObj["meshId"] = meshId;
+    jsonObj["message_type"] = messageType;
+
+    return jsonObj;
+  }
+
+#if ARDUINOJSON_VERSION_MAJOR < 7
+  size_t jsonObjectSize() const {
+    return JSON_OBJECT_SIZE(noJsonFields + 3) + JSON_ARRAY_SIZE(nodeCount) +
+           nodeCount * JSON_OBJECT_SIZE(4) + meshId.length();
+  }
+#endif
+};
+
+/**
+ * @brief Mesh connection information
+ */
+struct MeshConnection {
+  uint32_t fromNode = 0;    // Source node ID
+  uint32_t toNode = 0;      // Destination node ID
+  float linkQuality = 0.0;  // Link quality 0.0-1.0
+  uint16_t latencyMs = 0;   // Latency in milliseconds
+  uint8_t hopCount = 1;     // Number of hops
+};
+
+/**
+ * @brief Mesh topology package (Type 601 - MESH_TOPOLOGY)
+ *
+ * Provides mesh network topology with all connections.
+ * Type ID 601 for MESH_TOPOLOGY per mqtt-schema v0.7.2+.
+ */
+class MeshTopologyPackage : public painlessmesh::plugin::BroadcastPackage {
+ public:
+  // Array of connections (max 100 connections)
+  MeshConnection connections[100];
+  uint8_t connectionCount = 0;  // Actual number of connections
+  uint32_t rootNode = 0;        // Root/gateway node ID
+
+  // MQTT Schema v0.7.2+ message_type
+  uint16_t messageType = 601;  // MESH_TOPOLOGY
+
+  MeshTopologyPackage() : BroadcastPackage(601) {}
+
+  MeshTopologyPackage(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
+    JsonArray connsArray = jsonObj["connections"];
+    connectionCount = connsArray.size();
+    if (connectionCount > 100) connectionCount = 100;
+
+    for (uint8_t i = 0; i < connectionCount; i++) {
+      JsonObject conn = connsArray[i];
+      connections[i].fromNode = conn["from"];
+      connections[i].toNode = conn["to"];
+      connections[i].linkQuality = conn["quality"];
+      connections[i].latencyMs = conn["latency"];
+      connections[i].hopCount = conn["hops"];
+    }
+
+    rootNode = jsonObj["rootNode"];
+    messageType = jsonObj["message_type"] | 601;
+  }
+
+  JsonObject addTo(JsonObject&& jsonObj) const {
+    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
+
+    JsonArray connsArray = jsonObj["connections"].to<JsonArray>();
+    for (uint8_t i = 0; i < connectionCount; i++) {
+      JsonObject conn = connsArray.add<JsonObject>();
+      conn["from"] = connections[i].fromNode;
+      conn["to"] = connections[i].toNode;
+      conn["quality"] = connections[i].linkQuality;
+      conn["latency"] = connections[i].latencyMs;
+      conn["hops"] = connections[i].hopCount;
+    }
+
+    jsonObj["totalConnections"] = connectionCount;
+    jsonObj["rootNode"] = rootNode;
+    jsonObj["message_type"] = messageType;
+
+    return jsonObj;
+  }
+
+#if ARDUINOJSON_VERSION_MAJOR < 7
+  size_t jsonObjectSize() const {
+    return JSON_OBJECT_SIZE(noJsonFields + 3) +
+           JSON_ARRAY_SIZE(connectionCount) +
+           connectionCount * JSON_OBJECT_SIZE(5);
+  }
+#endif
+};
+
+/**
+ * @brief Mesh alert information
+ */
+struct MeshAlert {
+  uint8_t alertType =
+      0;  // 0=low_memory, 1=node_offline, 2=connection_lost, etc.
+  uint8_t severity = 0;     // 0=info, 1=warning, 2=critical
+  TSTRING message = "";     // Human-readable message
+  uint32_t nodeId = 0;      // Related node ID
+  float metricValue = 0.0;  // Related metric value
+  float threshold = 0.0;    // Threshold that triggered alert
+  uint32_t alertId = 0;     // Unique alert ID
+};
+
+/**
+ * @brief Mesh alert package (Type 602 - MESH_ALERT)
+ *
+ * Provides mesh network alerts for critical events.
+ * Type ID 602 for MESH_ALERT per mqtt-schema v0.7.2+.
+ */
+class MeshAlertPackage : public painlessmesh::plugin::BroadcastPackage {
+ public:
+  // Array of alerts (max 20 alerts)
+  MeshAlert alerts[20];
+  uint8_t alertCount = 0;  // Actual number of alerts
+
+  // MQTT Schema v0.7.2+ message_type
+  uint16_t messageType = 602;  // MESH_ALERT
+
+  MeshAlertPackage() : BroadcastPackage(602) {}
+
+  MeshAlertPackage(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
+    JsonArray alertsArray = jsonObj["alerts"];
+    alertCount = alertsArray.size();
+    if (alertCount > 20) alertCount = 20;
+
+    for (uint8_t i = 0; i < alertCount; i++) {
+      JsonObject alert = alertsArray[i];
+      alerts[i].alertType = alert["type"];
+      alerts[i].severity = alert["severity"];
+      alerts[i].message = alert["msg"].as<TSTRING>();
+      alerts[i].nodeId = alert["nodeId"];
+      alerts[i].metricValue = alert["value"];
+      alerts[i].threshold = alert["threshold"];
+      alerts[i].alertId = alert["alertId"];
+    }
+
+    messageType = jsonObj["message_type"] | 602;
+  }
+
+  JsonObject addTo(JsonObject&& jsonObj) const {
+    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
+
+    JsonArray alertsArray = jsonObj["alerts"].to<JsonArray>();
+    for (uint8_t i = 0; i < alertCount; i++) {
+      JsonObject alert = alertsArray.add<JsonObject>();
+      alert["type"] = alerts[i].alertType;
+      alert["severity"] = alerts[i].severity;
+      alert["msg"] = alerts[i].message;
+      alert["nodeId"] = alerts[i].nodeId;
+      alert["value"] = alerts[i].metricValue;
+      alert["threshold"] = alerts[i].threshold;
+      alert["alertId"] = alerts[i].alertId;
+    }
+
+    jsonObj["alertCount"] = alertCount;
+    jsonObj["message_type"] = messageType;
+
+    return jsonObj;
+  }
+
+#if ARDUINOJSON_VERSION_MAJOR < 7
+  size_t jsonObjectSize() const {
+    size_t size = JSON_OBJECT_SIZE(noJsonFields + 2) +
+                  JSON_ARRAY_SIZE(alertCount) +
+                  alertCount * JSON_OBJECT_SIZE(7);
+    for (uint8_t i = 0; i < alertCount; i++) {
+      size += alerts[i].message.length();
+    }
+    return size;
+  }
+#endif
+};
+
+/**
+ * @brief Mesh bridge package (Type 603 - MESH_BRIDGE)
+ *
+ * Encapsulates native mesh protocol messages for bridging.
+ * Type ID 603 for MESH_BRIDGE per mqtt-schema v0.7.2+.
+ */
+class MeshBridgePackage : public painlessmesh::plugin::BroadcastPackage {
+ public:
+  uint8_t meshProtocol = 0;    // 0=painlessMesh, 1=esp-now, 2=ble-mesh, etc.
+  uint32_t fromNodeId = 0;     // Source node ID
+  uint32_t toNodeId = 0;       // Destination node ID (0=broadcast)
+  uint16_t meshType = 0;       // Mesh protocol-specific message type
+  TSTRING rawPayload = "";     // Raw payload (hex/base64 encoded)
+  int8_t rssi = 0;             // Signal strength
+  uint8_t hopCount = 0;        // Number of hops
+  uint32_t meshTimestamp = 0;  // Mesh protocol timestamp
+  uint32_t gatewayNodeId = 0;  // Gateway's node ID
+  TSTRING meshNetworkId = "";  // Mesh network identifier
+
+  // MQTT Schema v0.7.2+ message_type
+  uint16_t messageType = 603;  // MESH_BRIDGE
+
+  MeshBridgePackage() : BroadcastPackage(603) {}
+
+  MeshBridgePackage(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
+    meshProtocol = jsonObj["protocol"];
+    fromNodeId = jsonObj["fromNode"];
+    toNodeId = jsonObj["toNode"];
+    meshType = jsonObj["meshType"];
+    rawPayload = jsonObj["payload"].as<TSTRING>();
+    rssi = jsonObj["rssi"];
+    hopCount = jsonObj["hops"];
+    meshTimestamp = jsonObj["meshTs"];
+    gatewayNodeId = jsonObj["gateway"];
+    meshNetworkId = jsonObj["meshId"].as<TSTRING>();
+    messageType = jsonObj["message_type"] | 603;
+  }
+
+  JsonObject addTo(JsonObject&& jsonObj) const {
+    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
+
+    jsonObj["protocol"] = meshProtocol;
+    jsonObj["fromNode"] = fromNodeId;
+    jsonObj["toNode"] = toNodeId;
+    jsonObj["meshType"] = meshType;
+    jsonObj["payload"] = rawPayload;
+    jsonObj["rssi"] = rssi;
+    jsonObj["hops"] = hopCount;
+    jsonObj["meshTs"] = meshTimestamp;
+    jsonObj["gateway"] = gatewayNodeId;
+    jsonObj["meshId"] = meshNetworkId;
+    jsonObj["message_type"] = messageType;
+
+    return jsonObj;
+  }
+
+#if ARDUINOJSON_VERSION_MAJOR < 7
+  size_t jsonObjectSize() const {
+    return JSON_OBJECT_SIZE(noJsonFields + 11) + rawPayload.length() +
+           meshNetworkId.length();
+  }
+#endif
+};
+
+}  // namespace alteriom
+
+#endif  // ALTERIOM_SENSOR_PACKAGE_HPP