@alteriom/painlessmesh 1.6.1 → 1.7.2

package/examples/alteriom/alteriom_sensor_package.hpp

@@ -1,128 +1,241 @@
-#ifndef ALTERIOM_SENSOR_PACKAGE_HPP
-#define ALTERIOM_SENSOR_PACKAGE_HPP
-
-#include "painlessmesh/plugin.hpp"
-
-namespace alteriom {
-
-/**
- * @brief Sensor data package for broadcasting environmental measurements
- *
- * This package is designed for Alteriom's IoT sensor network requirements,
- * allowing nodes to share environmental data across the mesh.
- */
-class SensorPackage : public painlessmesh::plugin::BroadcastPackage {
- public:
-  double temperature = 0.0;  // Temperature in Celsius
-  double humidity = 0.0;     // Relative humidity percentage
-  double pressure = 0.0;     // Atmospheric pressure in hPa
-  uint32_t sensorId = 0;     // Unique sensor identifier
-  uint32_t timestamp = 0;    // Unix timestamp of measurement
-  uint8_t batteryLevel = 0;  // Battery level percentage
-
-  SensorPackage()
-      : BroadcastPackage(200) {}  // Type ID 200 for Alteriom sensors
-
-  SensorPackage(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
-    temperature = jsonObj["temp"];
-    humidity = jsonObj["hum"];
-    pressure = jsonObj["press"];
-    sensorId = jsonObj["sid"];
-    timestamp = jsonObj["ts"];
-    batteryLevel = jsonObj["bat"];
-  }
-
-  JsonObject addTo(JsonObject&& jsonObj) const {
-    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
-    jsonObj["temp"] = temperature;
-    jsonObj["hum"] = humidity;
-    jsonObj["press"] = pressure;
-    jsonObj["sid"] = sensorId;
-    jsonObj["ts"] = timestamp;
-    jsonObj["bat"] = batteryLevel;
-    return jsonObj;
-  }
-
-#if ARDUINOJSON_VERSION_MAJOR < 7
-  size_t jsonObjectSize() const { return JSON_OBJECT_SIZE(noJsonFields + 6); }
-#endif
-};
-
-/**
- * @brief Command package for controlling Alteriom devices
- *
- * Single-destination package for sending specific commands to individual nodes.
- */
-class CommandPackage : public painlessmesh::plugin::SinglePackage {
- public:
-  uint8_t command = 0;        // Command type
-  uint32_t targetDevice = 0;  // Target device ID
-  TSTRING parameters = "";    // Command parameters as JSON string
-  uint32_t commandId = 0;     // Unique command identifier for tracking
-
-  CommandPackage() : SinglePackage(201) {}  // Type ID 201 for Alteriom commands
-
-  CommandPackage(JsonObject jsonObj) : SinglePackage(jsonObj) {
-    command = jsonObj["cmd"];
-    targetDevice = jsonObj["target"];
-    parameters = jsonObj["params"].as<TSTRING>();
-    commandId = jsonObj["cid"];
-  }
-
-  JsonObject addTo(JsonObject&& jsonObj) const {
-    jsonObj = SinglePackage::addTo(std::move(jsonObj));
-    jsonObj["cmd"] = command;
-    jsonObj["target"] = targetDevice;
-    jsonObj["params"] = parameters;
-    jsonObj["cid"] = commandId;
-    return jsonObj;
-  }
-
-#if ARDUINOJSON_VERSION_MAJOR < 7
-  size_t jsonObjectSize() const {
-    return JSON_OBJECT_SIZE(noJsonFields + 4) + parameters.length();
-  }
-#endif
-};
-
-/**
- * @brief Status report package for device health monitoring
- */
-class StatusPackage : public painlessmesh::plugin::BroadcastPackage {
- public:
-  uint8_t deviceStatus = 0;      // Device status flags
-  uint32_t uptime = 0;           // Device uptime in seconds
-  uint16_t freeMemory = 0;       // Free memory in KB
-  uint8_t wifiStrength = 0;      // WiFi signal strength
-  TSTRING firmwareVersion = "";  // Current firmware version
-
-  StatusPackage() : BroadcastPackage(202) {}  // Type ID 202 for Alteriom status
-
-  StatusPackage(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
-    deviceStatus = jsonObj["status"];
-    uptime = jsonObj["uptime"];
-    freeMemory = jsonObj["mem"];
-    wifiStrength = jsonObj["wifi"];
-    firmwareVersion = jsonObj["fw"].as<TSTRING>();
-  }
-
-  JsonObject addTo(JsonObject&& jsonObj) const {
-    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
-    jsonObj["status"] = deviceStatus;
-    jsonObj["uptime"] = uptime;
-    jsonObj["mem"] = freeMemory;
-    jsonObj["wifi"] = wifiStrength;
-    jsonObj["fw"] = firmwareVersion;
-    return jsonObj;
-  }
-
-#if ARDUINOJSON_VERSION_MAJOR < 7
-  size_t jsonObjectSize() const {
-    return JSON_OBJECT_SIZE(noJsonFields + 5) + firmwareVersion.length();
-  }
-#endif
-};
-
-}  // namespace alteriom
-
+#ifndef ALTERIOM_SENSOR_PACKAGE_HPP
+#define ALTERIOM_SENSOR_PACKAGE_HPP
+
+#include "painlessmesh/plugin.hpp"
+
+namespace alteriom {
+
+/**
+ * @brief Sensor data package for broadcasting environmental measurements
+ *
+ * This package is designed for Alteriom's IoT sensor network requirements,
+ * allowing nodes to share environmental data across the mesh.
+ */
+class SensorPackage : public painlessmesh::plugin::BroadcastPackage {
+ public:
+  // Temperature in Celsius
+  double temperature = 0.0;
+  // Relative humidity percentage
+  double humidity = 0.0;
+  // Atmospheric pressure in hPa
+  double pressure = 0.0;
+  // Unique sensor identifier
+  uint32_t sensorId = 0;
+  // Unix timestamp of measurement
+  uint32_t timestamp = 0;
+  // Battery level percentage
+  uint8_t batteryLevel = 0;
+
+  // Type ID 200 for Alteriom sensors
+  SensorPackage() : BroadcastPackage(200) {}
+
+  SensorPackage(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
+    temperature = jsonObj["temp"];
+    humidity = jsonObj["hum"];
+    pressure = jsonObj["press"];
+    sensorId = jsonObj["sid"];
+    timestamp = jsonObj["ts"];
+    batteryLevel = jsonObj["bat"];
+  }
+
+  JsonObject addTo(JsonObject&& jsonObj) const {
+    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
+    jsonObj["temp"] = temperature;
+    jsonObj["hum"] = humidity;
+    jsonObj["press"] = pressure;
+    jsonObj["sid"] = sensorId;
+    jsonObj["ts"] = timestamp;
+    jsonObj["bat"] = batteryLevel;
+    return jsonObj;
+  }
+
+#if ARDUINOJSON_VERSION_MAJOR < 7
+  size_t jsonObjectSize() const { return JSON_OBJECT_SIZE(noJsonFields + 6); }
+#endif
+};
+
+/**
+ * @brief Command package for controlling Alteriom devices
+ *
+ * Single-destination package for sending specific commands to individual nodes.
+ */
+class CommandPackage : public painlessmesh::plugin::SinglePackage {
+ public:
+  uint8_t command = 0;        // Command type
+  uint32_t targetDevice = 0;  // Target device ID
+  TSTRING parameters = "";    // Command parameters as JSON string
+  uint32_t commandId = 0;     // Unique command identifier for tracking
+
+  CommandPackage() : SinglePackage(201) {}  // Type ID 201 for Alteriom commands
+
+  CommandPackage(JsonObject jsonObj) : SinglePackage(jsonObj) {
+    command = jsonObj["cmd"];
+    targetDevice = jsonObj["target"];
+    parameters = jsonObj["params"].as<TSTRING>();
+    commandId = jsonObj["cid"];
+  }
+
+  JsonObject addTo(JsonObject&& jsonObj) const {
+    jsonObj = SinglePackage::addTo(std::move(jsonObj));
+    jsonObj["cmd"] = command;
+    jsonObj["target"] = targetDevice;
+    jsonObj["params"] = parameters;
+    jsonObj["cid"] = commandId;
+    return jsonObj;
+  }
+
+#if ARDUINOJSON_VERSION_MAJOR < 7
+  size_t jsonObjectSize() const {
+    return JSON_OBJECT_SIZE(noJsonFields + 4) + parameters.length();
+  }
+#endif
+};
+
+/**
+ * @brief Status report package for device health monitoring
+ */
+class StatusPackage : public painlessmesh::plugin::BroadcastPackage {
+ public:
+  uint8_t deviceStatus = 0;      // Device status flags
+  uint32_t uptime = 0;           // Device uptime in seconds
+  uint16_t freeMemory = 0;       // Free memory in KB
+  uint8_t wifiStrength = 0;      // WiFi signal strength
+  TSTRING firmwareVersion = "";  // Current firmware version
+
+  // Command response fields (for MQTT bridge)
+  uint32_t responseToCommand = 0;  // CommandId this is responding to
+  TSTRING responseMessage = "";    // Success/error message
+
+  StatusPackage() : BroadcastPackage(202) {}  // Type ID 202 for Alteriom status
+
+  StatusPackage(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
+    deviceStatus = jsonObj["status"];
+    uptime = jsonObj["uptime"];
+    freeMemory = jsonObj["mem"];
+    wifiStrength = jsonObj["wifi"];
+    firmwareVersion = jsonObj["fw"].as<TSTRING>();
+    responseToCommand = jsonObj["respTo"] | 0;
+    responseMessage = jsonObj["respMsg"].as<TSTRING>();
+  }
+
+  JsonObject addTo(JsonObject&& jsonObj) const {
+    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
+    jsonObj["status"] = deviceStatus;
+    jsonObj["uptime"] = uptime;
+    jsonObj["mem"] = freeMemory;
+    jsonObj["wifi"] = wifiStrength;
+    jsonObj["fw"] = firmwareVersion;
+    if (responseToCommand > 0) {
+      jsonObj["respTo"] = responseToCommand;
+      jsonObj["respMsg"] = responseMessage;
+    }
+    return jsonObj;
+  }
+
+#if ARDUINOJSON_VERSION_MAJOR < 7
+  size_t jsonObjectSize() const {
+    return JSON_OBJECT_SIZE(noJsonFields + 7) + firmwareVersion.length() +
+           responseMessage.length();
+  }
+#endif
+};
+
+/**
+ * @brief Enhanced status package with comprehensive health metrics (Phase 1)
+ *
+ * This is an extended version of StatusPackage that includes additional
+ * mesh statistics, performance metrics, and alerting capabilities.
+ * Type ID 203 is used to distinguish from the basic StatusPackage (202).
+ */
+class EnhancedStatusPackage : public painlessmesh::plugin::BroadcastPackage {
+ public:
+  // Device Health (from original StatusPackage)
+  uint8_t deviceStatus = 0;      // Device status flags
+  uint32_t uptime = 0;           // Device uptime in seconds
+  uint16_t freeMemory = 0;       // Free memory in KB
+  uint8_t wifiStrength = 0;      // WiFi signal strength
+  TSTRING firmwareVersion = "";  // Current firmware version
+  TSTRING firmwareMD5 = "";      // Firmware hash for OTA verification
+
+  // Mesh Statistics
+  uint16_t nodeCount = 0;         // Number of known nodes in mesh
+  uint8_t connectionCount = 0;    // Number of direct connections
+  uint32_t messagesReceived = 0;  // Total messages received
+  uint32_t messagesSent = 0;      // Total messages sent
+  uint32_t messagesDropped = 0;   // Total messages dropped/failed
+
+  // Performance Metrics
+  uint16_t avgLatency = 0;     // Average message latency in ms
+  uint8_t packetLossRate = 0;  // Packet loss rate percentage (0-100)
+  uint16_t throughput = 0;     // Network throughput in bytes/sec
+
+  // Warnings/Alerts
+  uint8_t alertFlags = 0;  // Bit flags for various alert conditions
+  TSTRING lastError = "";  // Last error message for diagnostics
+
+  EnhancedStatusPackage()
+      : BroadcastPackage(203) {}  // Type ID 203 for enhanced status
+
+  EnhancedStatusPackage(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
+    deviceStatus = jsonObj["status"];
+    uptime = jsonObj["uptime"];
+    freeMemory = jsonObj["mem"];
+    wifiStrength = jsonObj["wifi"];
+    firmwareVersion = jsonObj["fw"].as<TSTRING>();
+    firmwareMD5 = jsonObj["fwMD5"].as<TSTRING>();
+
+    nodeCount = jsonObj["nodes"];
+    connectionCount = jsonObj["conns"];
+    messagesReceived = jsonObj["msgRx"];
+    messagesSent = jsonObj["msgTx"];
+    messagesDropped = jsonObj["msgDrop"];
+
+    avgLatency = jsonObj["latency"];
+    packetLossRate = jsonObj["loss"];
+    throughput = jsonObj["throughput"];
+
+    alertFlags = jsonObj["alerts"];
+    lastError = jsonObj["lastErr"].as<TSTRING>();
+  }
+
+  JsonObject addTo(JsonObject&& jsonObj) const {
+    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
+
+    // Device Health
+    jsonObj["status"] = deviceStatus;
+    jsonObj["uptime"] = uptime;
+    jsonObj["mem"] = freeMemory;
+    jsonObj["wifi"] = wifiStrength;
+    jsonObj["fw"] = firmwareVersion;
+    jsonObj["fwMD5"] = firmwareMD5;
+
+    // Mesh Statistics
+    jsonObj["nodes"] = nodeCount;
+    jsonObj["conns"] = connectionCount;
+    jsonObj["msgRx"] = messagesReceived;
+    jsonObj["msgTx"] = messagesSent;
+    jsonObj["msgDrop"] = messagesDropped;
+
+    // Performance Metrics
+    jsonObj["latency"] = avgLatency;
+    jsonObj["loss"] = packetLossRate;
+    jsonObj["throughput"] = throughput;
+
+    // Alerts
+    jsonObj["alerts"] = alertFlags;
+    jsonObj["lastErr"] = lastError;
+
+    return jsonObj;
+  }
+
+#if ARDUINOJSON_VERSION_MAJOR < 7
+  size_t jsonObjectSize() const {
+    return JSON_OBJECT_SIZE(noJsonFields + 18) + firmwareVersion.length() +
+           firmwareMD5.length() + lastError.length();
+  }
+#endif
+};
+
+}  // namespace alteriom
+
 #endif  // ALTERIOM_SENSOR_PACKAGE_HPP

package/examples/alteriom/platformio.ini

@@ -1,25 +1,25 @@
-[platformio]
-src_dir = .
-
-[env]
-lib_deps =
-    bblanchon/ArduinoJson
-    arkhipenko/TaskScheduler
-
-[env:esp8266]
-platform = espressif8266
-board = nodemcuv2
-framework = arduino
-lib_extra_dirs = ../../  ; Load the local copy of painlessmesh. For your own example add painlessmesh to the lib_deps
-lib_deps =
-    ${env.lib_deps}  ; Inherit common dependencies
-    esp32async/ESPAsyncTCP  ; Only for ESP8266
-
-[env:esp32]
-platform = espressif32
-board = esp32dev
-framework = arduino
-lib_extra_dirs = ../../  ; Load the local copy of painlessmesh. For your own example add painlessmesh to the lib_deps
-lib_deps =
-    ${env.lib_deps}  ; Inherit common dependencies
+[platformio]
+src_dir = .
+
+[env]
+lib_deps =
+    bblanchon/ArduinoJson
+    arkhipenko/TaskScheduler
+
+[env:esp8266]
+platform = espressif8266
+board = nodemcuv2
+framework = arduino
+lib_extra_dirs = ../../  ; Load the local copy of painlessmesh. For your own example add painlessmesh to the lib_deps
+lib_deps =
+    ${env.lib_deps}  ; Inherit common dependencies
+    esp32async/ESPAsyncTCP  ; Only for ESP8266
+
+[env:esp32]
+platform = espressif32
+board = esp32dev
+framework = arduino
+lib_extra_dirs = ../../  ; Load the local copy of painlessmesh. For your own example add painlessmesh to the lib_deps
+lib_deps =
+    ${env.lib_deps}  ; Inherit common dependencies
     esp32async/AsyncTCP

package/examples/alteriomImproved/alteriom_sensor_package.hpp

@@ -0,0 +1,224 @@
+#ifndef ALTERIOM_SENSOR_PACKAGE_HPP
+#define ALTERIOM_SENSOR_PACKAGE_HPP
+
+#include "painlessmesh/plugin.hpp"
+
+namespace alteriom {
+
+/**
+ * @brief Sensor data package for broadcasting environmental measurements
+ *
+ * This package is designed for Alteriom's IoT sensor network requirements,
+ * allowing nodes to share environmental data across the mesh.
+ */
+class SensorPackage : public painlessmesh::plugin::BroadcastPackage {
+ public:
+  double temperature = 0.0;  // Temperature in Celsius
+  double humidity = 0.0;     // Relative humidity percentage
+  double pressure = 0.0;     // Atmospheric pressure in hPa
+  uint32_t sensorId = 0;     // Unique sensor identifier
+  uint32_t timestamp = 0;    // Unix timestamp of measurement
+  uint8_t batteryLevel = 0;  // Battery level percentage
+
+  SensorPackage()
+      : BroadcastPackage(200) {}  // Type ID 200 for Alteriom sensors
+
+  SensorPackage(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
+    temperature = jsonObj["temp"];
+    humidity = jsonObj["hum"];
+    pressure = jsonObj["press"];
+    sensorId = jsonObj["sid"];
+    timestamp = jsonObj["ts"];
+    batteryLevel = jsonObj["bat"];
+  }
+
+  JsonObject addTo(JsonObject&& jsonObj) const {
+    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
+    jsonObj["temp"] = temperature;
+    jsonObj["hum"] = humidity;
+    jsonObj["press"] = pressure;
+    jsonObj["sid"] = sensorId;
+    jsonObj["ts"] = timestamp;
+    jsonObj["bat"] = batteryLevel;
+    return jsonObj;
+  }
+
+#if ARDUINOJSON_VERSION_MAJOR < 7
+  size_t jsonObjectSize() const { return JSON_OBJECT_SIZE(noJsonFields + 6); }
+#endif
+};
+
+/**
+ * @brief Command package for controlling Alteriom devices
+ *
+ * Single-destination package for sending specific commands to individual nodes.
+ */
+class CommandPackage : public painlessmesh::plugin::SinglePackage {
+ public:
+  uint8_t command = 0;        // Command type
+  uint32_t targetDevice = 0;  // Target device ID
+  TSTRING parameters = "";    // Command parameters as JSON string
+  uint32_t commandId = 0;     // Unique command identifier for tracking
+
+  CommandPackage() : SinglePackage(201) {}  // Type ID 201 for Alteriom commands
+
+  CommandPackage(JsonObject jsonObj) : SinglePackage(jsonObj) {
+    command = jsonObj["cmd"];
+    targetDevice = jsonObj["target"];
+    parameters = jsonObj["params"].as<TSTRING>();
+    commandId = jsonObj["cid"];
+  }
+
+  JsonObject addTo(JsonObject&& jsonObj) const {
+    jsonObj = SinglePackage::addTo(std::move(jsonObj));
+    jsonObj["cmd"] = command;
+    jsonObj["target"] = targetDevice;
+    jsonObj["params"] = parameters;
+    jsonObj["cid"] = commandId;
+    return jsonObj;
+  }
+
+#if ARDUINOJSON_VERSION_MAJOR < 7
+  size_t jsonObjectSize() const {
+    return JSON_OBJECT_SIZE(noJsonFields + 4) + parameters.length();
+  }
+#endif
+};
+
+/**
+ * @brief Status report package for device health monitoring
+ */
+class StatusPackage : public painlessmesh::plugin::BroadcastPackage {
+ public:
+  uint8_t deviceStatus = 0;      // Device status flags
+  uint32_t uptime = 0;           // Device uptime in seconds
+  uint16_t freeMemory = 0;       // Free memory in KB
+  uint8_t wifiStrength = 0;      // WiFi signal strength
+  TSTRING firmwareVersion = "";  // Current firmware version
+
+  StatusPackage() : BroadcastPackage(202) {}  // Type ID 202 for Alteriom status
+
+  StatusPackage(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
+    deviceStatus = jsonObj["status"];
+    uptime = jsonObj["uptime"];
+    freeMemory = jsonObj["mem"];
+    wifiStrength = jsonObj["wifi"];
+    firmwareVersion = jsonObj["fw"].as<TSTRING>();
+  }
+
+  JsonObject addTo(JsonObject&& jsonObj) const {
+    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
+    jsonObj["status"] = deviceStatus;
+    jsonObj["uptime"] = uptime;
+    jsonObj["mem"] = freeMemory;
+    jsonObj["wifi"] = wifiStrength;
+    jsonObj["fw"] = firmwareVersion;
+    return jsonObj;
+  }
+
+#if ARDUINOJSON_VERSION_MAJOR < 7
+  size_t jsonObjectSize() const {
+    return JSON_OBJECT_SIZE(noJsonFields + 5) + firmwareVersion.length();
+  }
+#endif
+};
+
+/**
+ * @brief Enhanced status package with comprehensive health metrics (Phase 1)
+ *
+ * This is an extended version of StatusPackage that includes additional
+ * mesh statistics, performance metrics, and alerting capabilities.
+ * Type ID 203 is used to distinguish from the basic StatusPackage (202).
+ */
+class EnhancedStatusPackage : public painlessmesh::plugin::BroadcastPackage {
+ public:
+  // Device Health (from original StatusPackage)
+  uint8_t deviceStatus = 0;      // Device status flags
+  uint32_t uptime = 0;           // Device uptime in seconds
+  uint16_t freeMemory = 0;       // Free memory in KB
+  uint8_t wifiStrength = 0;      // WiFi signal strength
+  TSTRING firmwareVersion = "";  // Current firmware version
+  TSTRING firmwareMD5 = "";      // Firmware hash for OTA verification
+
+  // Mesh Statistics
+  uint16_t nodeCount = 0;         // Number of known nodes in mesh
+  uint8_t connectionCount = 0;    // Number of direct connections
+  uint32_t messagesReceived = 0;  // Total messages received
+  uint32_t messagesSent = 0;      // Total messages sent
+  uint32_t messagesDropped = 0;   // Total messages dropped/failed
+
+  // Performance Metrics
+  uint16_t avgLatency = 0;     // Average message latency in ms
+  uint8_t packetLossRate = 0;  // Packet loss rate percentage (0-100)
+  uint16_t throughput = 0;     // Network throughput in bytes/sec
+
+  // Warnings/Alerts
+  uint8_t alertFlags = 0;  // Bit flags for various alert conditions
+  TSTRING lastError = "";  // Last error message for diagnostics
+
+  EnhancedStatusPackage()
+      : BroadcastPackage(203) {}  // Type ID 203 for enhanced status
+
+  EnhancedStatusPackage(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
+    deviceStatus = jsonObj["status"];
+    uptime = jsonObj["uptime"];
+    freeMemory = jsonObj["mem"];
+    wifiStrength = jsonObj["wifi"];
+    firmwareVersion = jsonObj["fw"].as<TSTRING>();
+    firmwareMD5 = jsonObj["fwMD5"].as<TSTRING>();
+
+    nodeCount = jsonObj["nodes"];
+    connectionCount = jsonObj["conns"];
+    messagesReceived = jsonObj["msgRx"];
+    messagesSent = jsonObj["msgTx"];
+    messagesDropped = jsonObj["msgDrop"];
+
+    avgLatency = jsonObj["latency"];
+    packetLossRate = jsonObj["loss"];
+    throughput = jsonObj["throughput"];
+
+    alertFlags = jsonObj["alerts"];
+    lastError = jsonObj["lastErr"].as<TSTRING>();
+  }
+
+  JsonObject addTo(JsonObject&& jsonObj) const {
+    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
+
+    // Device Health
+    jsonObj["status"] = deviceStatus;
+    jsonObj["uptime"] = uptime;
+    jsonObj["mem"] = freeMemory;
+    jsonObj["wifi"] = wifiStrength;
+    jsonObj["fw"] = firmwareVersion;
+    jsonObj["fwMD5"] = firmwareMD5;
+
+    // Mesh Statistics
+    jsonObj["nodes"] = nodeCount;
+    jsonObj["conns"] = connectionCount;
+    jsonObj["msgRx"] = messagesReceived;
+    jsonObj["msgTx"] = messagesSent;
+    jsonObj["msgDrop"] = messagesDropped;
+
+    // Performance Metrics
+    jsonObj["latency"] = avgLatency;
+    jsonObj["loss"] = packetLossRate;
+    jsonObj["throughput"] = throughput;
+
+    // Alerts
+    jsonObj["alerts"] = alertFlags;
+    jsonObj["lastErr"] = lastError;
+
+    return jsonObj;
+  }
+
+#if ARDUINOJSON_VERSION_MAJOR < 7
+  size_t jsonObjectSize() const {
+    return JSON_OBJECT_SIZE(noJsonFields + 18) + firmwareVersion.length() +
+           firmwareMD5.length() + lastError.length();
+  }
+#endif
+};
+
+}  // namespace alteriom
+
+#endif  // ALTERIOM_SENSOR_PACKAGE_HPP