@almyty/chat 1.2.0 → 1.4.0

package/dist/viewport.js

@@ -0,0 +1,118 @@
+/**
+ * How much of the transcript fits on screen.
+ *
+ * ink redraws its whole tree, so a transcript taller than the terminal
+ * garbles the frame instead of scrolling it. The fix is to draw only
+ * what fits and say how much is above. Pure arithmetic, kept out of the
+ * components so it can be tested at any terminal size — including the
+ * 40-column window nobody remembers to try.
+ */
+/** Narrowest width worth laying out for. */
+export const MIN_COLUMNS = 40;
+/** Fewest transcript rows to draw, even on a very short terminal. */
+export const MIN_ROWS = 5;
+export function columns(stdoutColumns) {
+    return Math.max(stdoutColumns && stdoutColumns > 0 ? stdoutColumns : 80, MIN_COLUMNS);
+}
+/**
+ * Rows left for the transcript once the header, prompt and status bar
+ * have taken theirs.
+ */
+export function usableRows(stdoutRows, chromeRows) {
+    const total = stdoutRows && stdoutRows > 0 ? stdoutRows : 24;
+    return Math.max(total - chromeRows, MIN_ROWS);
+}
+/**
+ * Code points that take two terminal columns: the East Asian Wide and
+ * Fullwidth ranges, plus the emoji blocks terminals render double-width.
+ */
+function isWide(cp) {
+    return ((cp >= 0x1100 && cp <= 0x115f) || // Hangul Jamo
+        (cp >= 0x2e80 && cp <= 0x303e) || // CJK radicals, Kangxi, CJK symbols
+        (cp >= 0x3041 && cp <= 0x33ff) || // Hiragana, Katakana, Hangul, CJK compatibility
+        (cp >= 0x3400 && cp <= 0x4dbf) || // CJK extension A
+        (cp >= 0x4e00 && cp <= 0x9fff) || // CJK unified ideographs
+        (cp >= 0xa000 && cp <= 0xa4cf) || // Yi
+        (cp >= 0xac00 && cp <= 0xd7a3) || // Hangul syllables
+        (cp >= 0xf900 && cp <= 0xfaff) || // CJK compatibility ideographs
+        (cp >= 0xfe30 && cp <= 0xfe6f) || // CJK compatibility forms
+        (cp >= 0xff00 && cp <= 0xff60) || // Fullwidth forms
+        (cp >= 0xffe0 && cp <= 0xffe6) ||
+        (cp >= 0x1f300 && cp <= 0x1f64f) || // emoji, pictographs
+        (cp >= 0x1f680 && cp <= 0x1f6ff) ||
+        (cp >= 0x1f900 && cp <= 0x1f9ff) ||
+        (cp >= 0x20000 && cp <= 0x3fffd) // CJK extension B and later
+    );
+}
+/**
+ * How many terminal columns a string occupies.
+ *
+ * `String.length` counts UTF-16 units, which is not width. A CJK
+ * character is one unit and two columns; an emoji is two units and two
+ * columns; a combining mark or a zero-width joiner is a unit and no
+ * columns. Measuring by length made a Japanese or Chinese transcript
+ * estimate half its real height, so the window packed twice what fits
+ * and ink drew a frame taller than the terminal — the garbling the rest
+ * of this module exists to prevent.
+ */
+export function displayWidth(text) {
+    let width = 0;
+    for (const ch of text) {
+        const cp = ch.codePointAt(0);
+        // Zero-width: combining marks, joiners, variation selectors.
+        if (cp === 0x200b || cp === 0x200d || cp === 0xfeff ||
+            (cp >= 0x0300 && cp <= 0x036f) ||
+            (cp >= 0x1ab0 && cp <= 0x1aff) ||
+            (cp >= 0x20d0 && cp <= 0x20f0) ||
+            (cp >= 0xfe00 && cp <= 0xfe0f)) {
+            continue;
+        }
+        width += isWide(cp) ? 2 : 1;
+    }
+    return width;
+}
+/**
+ * Rows one message will occupy at this width.
+ *
+ * Counts the wrap, not the characters: a 300-character paragraph is
+ * four rows at 80 columns and eight at 40.
+ */
+export function estimateLines(text, cols) {
+    const textWidth = Math.max(cols - 10, 20);
+    const lines = text.split('\n');
+    let total = 1; // the margin every message carries
+    for (const line of lines) {
+        total += Math.max(1, Math.ceil(Math.max(displayWidth(line), 1) / textWidth));
+    }
+    return total;
+}
+/**
+ * The slice of messages to draw.
+ *
+ * Walks backwards from the end so the newest message is always visible:
+ * a transcript that scrolls away from the answer you just asked for is
+ * worse than one that hides the beginning. The newest message is kept
+ * even when it alone is taller than the window, because dropping it
+ * would leave an empty screen.
+ */
+export function selectWindow(messages, options) {
+    const scrollOffset = Math.max(0, Math.min(options.scrollOffset ?? 0, messages.length));
+    const available = Math.max(options.rows - (options.reservedRows ?? 0), MIN_ROWS);
+    const endIdx = Math.max(0, messages.length - scrollOffset);
+    let used = 0;
+    let startIdx = endIdx;
+    for (let i = endIdx - 1; i >= 0; i--) {
+        const cost = estimateLines(messages[i].text, options.cols);
+        // The last message always goes in; anything earlier has to fit.
+        if (used + cost > available && i < endIdx - 1)
+            break;
+        used += cost;
+        startIdx = i;
+    }
+    return {
+        startIdx,
+        endIdx,
+        hiddenBefore: startIdx,
+        hiddenAfter: messages.length - endIdx,
+    };
+}

package/package.json

@@ -1,10 +1,10 @@
 {
   "name": "@almyty/chat",
-  "version": "1.2.0",
+  "version": "1.4.0",
   "publishConfig": {
     "access": "public"
   },
-  "description": "Chat with your almyty agents in an interactive terminal REPL \u2014 multi-turn and streaming, with tool calls and autonomous runs.",
+  "description": "Chat with your almyty agents in an interactive terminal REPL — multi-turn and streaming, with tool calls and autonomous runs.",
   "type": "module",
   "main": "dist/index.js",
   "bin": {
@@ -15,7 +15,8 @@
   ],
   "scripts": {
     "build": "tsc && chmod +x dist/index.js",
-    "dev": "tsx src/index.ts",
+    "dev": "tsx src/index.tsx",
+    "typecheck": "tsc --noEmit",
     "test": "vitest run",
     "test:watch": "vitest",
     "prepublishOnly": "npm run build"
@@ -31,15 +32,15 @@
   "license": "Apache-2.0",
   "dependencies": {
     "@almyty/client": "^1.2.0",
-    "@types/react": "^19.2.14",
     "ink": "^7.0.1",
     "ink-spinner": "^5.0.0",
-    "ink-testing-library": "^4.0.0",
     "ink-text-input": "^6.0.0",
     "react": "^19.2.5"
   },
   "devDependencies": {
     "@types/node": "^25.4.0",
+    "@types/react": "^19.2.14",
+    "ink-testing-library": "^4.0.0",
     "tsx": "^4.7.0",
     "typescript": "^5.3.0",
     "vitest": "^4.1.0"
@@ -52,5 +53,8 @@
   },
   "bugs": {
     "url": "https://github.com/almyty-inc/almyty/issues"
+  },
+  "overrides": {
+    "postcss": "^8.5.23"
   }
 }