@alicloud/vpc20160428 7.3.1 → 7.3.2

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
Files changed (67) hide show
  1. package/dist/client.d.ts +132 -130
  2. package/dist/client.js +132 -130
  3. package/dist/client.js.map +1 -1
  4. package/dist/models/AddCommonBandwidthPackageIpRequest.d.ts +4 -4
  5. package/dist/models/CreateCommonBandwidthPackageRequest.d.ts +15 -15
  6. package/dist/models/CreateDhcpOptionsSetRequest.d.ts +7 -7
  7. package/dist/models/CreateFlowLogRequest.d.ts +17 -9
  8. package/dist/models/CreateFlowLogRequest.js.map +1 -1
  9. package/dist/models/CreateRouteEntriesRequest.d.ts +17 -17
  10. package/dist/models/CreateRouteEntriesResponseBody.d.ts +3 -3
  11. package/dist/models/CreateRouteEntryRequest.d.ts +8 -8
  12. package/dist/models/CreateVpnPbrRouteEntryRequest.d.ts +15 -15
  13. package/dist/models/CreateVpnPbrRouteEntryResponseBody.d.ts +3 -3
  14. package/dist/models/CreateVpnRouteEntryRequest.d.ts +7 -7
  15. package/dist/models/CreateVpnRouteEntryResponseBody.d.ts +2 -2
  16. package/dist/models/CreateVswitchCidrReservationRequest.d.ts +11 -11
  17. package/dist/models/DeleteRouteEntriesRequest.d.ts +3 -3
  18. package/dist/models/DeleteRouteEntriesResponseBody.d.ts +3 -3
  19. package/dist/models/DeleteRouteEntryRequest.d.ts +3 -3
  20. package/dist/models/DescribeRouteEntryListRequest.d.ts +6 -6
  21. package/dist/models/DescribeRouteEntryListResponseBody.d.ts +3 -2
  22. package/dist/models/DescribeRouteEntryListResponseBody.js +2 -0
  23. package/dist/models/DescribeRouteEntryListResponseBody.js.map +1 -1
  24. package/dist/models/DescribeVswitchAttributesRequest.d.ts +2 -2
  25. package/dist/models/DescribeVswitchAttributesResponseBody.d.ts +1 -1
  26. package/dist/models/GetDhcpOptionsSetRequest.d.ts +1 -1
  27. package/dist/models/GetDhcpOptionsSetResponseBody.d.ts +1 -1
  28. package/dist/models/GetVpcPrefixListAssociationsResponseBody.d.ts +8 -0
  29. package/dist/models/GetVpcPrefixListAssociationsResponseBody.js +2 -0
  30. package/dist/models/GetVpcPrefixListAssociationsResponseBody.js.map +1 -1
  31. package/dist/models/GetVpcRouteEntrySummaryRequest.d.ts +7 -7
  32. package/dist/models/GetVpcRouteEntrySummaryResponseBody.d.ts +8 -8
  33. package/dist/models/ModifyRouteEntryRequest.d.ts +4 -4
  34. package/dist/models/RemoveCommonBandwidthPackageIpRequest.d.ts +8 -4
  35. package/dist/models/RemoveCommonBandwidthPackageIpRequest.js.map +1 -1
  36. package/dist/models/RetryVpcPrefixListAssociationRequest.d.ts +7 -7
  37. package/dist/models/SwitchActiveRouteTargetRequest.d.ts +3 -3
  38. package/package.json +1 -1
  39. package/src/client.ts +132 -130
  40. package/src/models/AddCommonBandwidthPackageIpRequest.ts +4 -4
  41. package/src/models/CreateCommonBandwidthPackageRequest.ts +15 -15
  42. package/src/models/CreateDhcpOptionsSetRequest.ts +7 -7
  43. package/src/models/CreateFlowLogRequest.ts +17 -9
  44. package/src/models/CreateRouteEntriesRequest.ts +17 -17
  45. package/src/models/CreateRouteEntriesResponseBody.ts +3 -3
  46. package/src/models/CreateRouteEntryRequest.ts +8 -8
  47. package/src/models/CreateVpnPbrRouteEntryRequest.ts +15 -15
  48. package/src/models/CreateVpnPbrRouteEntryResponseBody.ts +3 -3
  49. package/src/models/CreateVpnRouteEntryRequest.ts +7 -7
  50. package/src/models/CreateVpnRouteEntryResponseBody.ts +2 -2
  51. package/src/models/CreateVswitchCidrReservationRequest.ts +11 -11
  52. package/src/models/DeleteRouteEntriesRequest.ts +3 -3
  53. package/src/models/DeleteRouteEntriesResponseBody.ts +3 -3
  54. package/src/models/DeleteRouteEntryRequest.ts +3 -3
  55. package/src/models/DescribeRouteEntryListRequest.ts +6 -6
  56. package/src/models/DescribeRouteEntryListResponseBody.ts +5 -2
  57. package/src/models/DescribeVswitchAttributesRequest.ts +2 -2
  58. package/src/models/DescribeVswitchAttributesResponseBody.ts +1 -1
  59. package/src/models/GetDhcpOptionsSetRequest.ts +1 -1
  60. package/src/models/GetDhcpOptionsSetResponseBody.ts +1 -1
  61. package/src/models/GetVpcPrefixListAssociationsResponseBody.ts +10 -0
  62. package/src/models/GetVpcRouteEntrySummaryRequest.ts +7 -7
  63. package/src/models/GetVpcRouteEntrySummaryResponseBody.ts +8 -8
  64. package/src/models/ModifyRouteEntryRequest.ts +4 -4
  65. package/src/models/RemoveCommonBandwidthPackageIpRequest.ts +8 -4
  66. package/src/models/RetryVpcPrefixListAssociationRequest.ts +7 -7
  67. package/src/models/SwitchActiveRouteTargetRequest.ts +3 -3
@@ -16,7 +16,7 @@ export declare class AddCommonBandwidthPackageIpRequest extends $dara.Model {
16
16
  *
17
17
  * You can use the client to generate the token, but you must make sure that the token is unique among different requests. The ClientToken value can contain only ASCII characters.
18
18
  *
19
- * > If you do not specify this parameter, the system uses the **RequestId** of the API request as the **ClientToken**. The **RequestId** may be different for each API request.
19
+ * > If you do not specify this parameter, the system automatically uses the **RequestId** of the API request as the **ClientToken**. The **RequestId** may be different for each API request.
20
20
  *
21
21
  * @example
22
22
  * 0c593ea1-3bea-11e9-b96b-88e9fe637760
@@ -24,7 +24,7 @@ export declare class AddCommonBandwidthPackageIpRequest extends $dara.Model {
24
24
  clientToken?: string;
25
25
  /**
26
26
  * @remarks
27
- * Specifies whether to perform a dry run without actually executing the operation.
27
+ * Specifies whether to perform a dry run, without performing the actual request.
28
28
  *
29
29
  * @example
30
30
  * false
@@ -34,7 +34,7 @@ export declare class AddCommonBandwidthPackageIpRequest extends $dara.Model {
34
34
  * @remarks
35
35
  * The ID of the EIP instance.
36
36
  *
37
- * You can call [DescribeEipAddresses](https://help.aliyun.com/document_detail/36018.html) to query the ID of the EIP instance.
37
+ * You can call [DescribeEipAddresses](https://www.alibabacloud.com/help/en/eip/developer-reference/api-vpc-2016-04-28-describeeipaddresses-eips) to query the ID of the EIP instance.
38
38
  *
39
39
  * This parameter is required.
40
40
  *
@@ -44,7 +44,7 @@ export declare class AddCommonBandwidthPackageIpRequest extends $dara.Model {
44
44
  ipInstanceId?: string;
45
45
  /**
46
46
  * @remarks
47
- * The IP type. Valid values: **EIP**, which indicates that an EIP is added to the Internet Shared Bandwidth instance.
47
+ * The IP type. Set the value to **EIP**, which specifies that an EIP is added to the Internet Shared Bandwidth instance.
48
48
  *
49
49
  * @example
50
50
  * EIP
@@ -40,9 +40,9 @@ export declare class CreateCommonBandwidthPackageRequest extends $dara.Model {
40
40
  *
41
41
  * <props="china">
42
42
  *
43
- * - If **InternetChargeType** is set to **PayByBandwidth**, which indicates that the billing method of the Internet Shared Bandwidth instance is pay-by-bandwidth, the default value range of **Bandwidth** is **2** to **20000**.
44
- * - If **InternetChargeType** is set to **PayBy95**, which indicates that the billing method of the Internet Shared Bandwidth instance is enhanced 95th percentile billing, the default value range of **Bandwidth** is **200** to **20000**.
45
- * - If **InternetChargeType** is set to **PayByDominantTraffic**, which indicates that the billing method of the Internet Shared Bandwidth instance is pay-by-dominant-traffic, the default value range of **Bandwidth** is **1** to **2000**.
43
+ * - If **InternetChargeType** is set to **PayByBandwidth**, which indicates the billing method is pay-by-bandwidth, the default value range of **Bandwidth** is **2** to **20000**.
44
+ * - If **InternetChargeType** is set to **PayBy95**, which indicates the billing method is enhanced 95th percentile, the default value range of **Bandwidth** is **200** to **20000**.
45
+ * - If **InternetChargeType** is set to **PayByDominantTraffic**, which indicates the billing method is pay-by-dominant-traffic, the default value range of **Bandwidth** is **1** to **2000**.
46
46
  *
47
47
  * Default value: **1000**.
48
48
  *
@@ -77,8 +77,8 @@ export declare class CreateCommonBandwidthPackageRequest extends $dara.Model {
77
77
  /**
78
78
  * @remarks
79
79
  * The line type. Valid values:
80
- * - **BGP** (default): BGP (multi-ISP) lines. BGP (multi-ISP) lines are supported in all regions.
81
- * - **BGP_PRO**: BGP (multi-ISP) premium lines. Currently, BGP (multi-ISP) premium Internet Shared Bandwidth instances are supported only in the Hong Kong (China), Singapore, Japan (Tokyo), Philippines (Manila), Malaysia (Kuala Lumpur), Indonesia (Jakarta), and Thailand (Bangkok) regions.
80
+ * - **BGP** (default): BGP (multi-ISP) lines. All regions support BGP (multi-ISP) lines.
81
+ * - **BGP_PRO**: BGP (Multi-ISP) Pro lines. Currently, only Hong Kong (China), Singapore, Japan (Tokyo), Philippines (Manila), Malaysia (Kuala Lumpur), Indonesia (Jakarta), and Thailand (Bangkok) regions support BGP (Multi-ISP) Pro Internet Shared Bandwidth instances.
82
82
  *
83
83
  * If you are a single-ISP bandwidth whitelist user, you can also select the following types:
84
84
  * - **ChinaTelecom**: China Telecom
@@ -88,7 +88,7 @@ export declare class CreateCommonBandwidthPackageRequest extends $dara.Model {
88
88
  * - **ChinaUnicom_L2**: China Unicom L2
89
89
  * - **ChinaMobile_L2**: China Mobile L2
90
90
  *
91
- * If you are an Alibaba Finance Cloud user in Hangzhou, this parameter is required. Set the value to **BGP_FinanceCloud**.
91
+ * If you are a China (Hangzhou) Finance Cloud user, this field is required. Set the value to **BGP_FinanceCloud**.
92
92
  *
93
93
  * @example
94
94
  * BGP
@@ -102,11 +102,11 @@ export declare class CreateCommonBandwidthPackageRequest extends $dara.Model {
102
102
  * <props="china">
103
103
  *
104
104
  * - **PayByBandwidth** (default): pay-by-bandwidth.
105
- * - **PayBy95**: pay-by-enhanced-95th-percentile.
106
- * - **PayByDominantTraffic**: pay-by-dominant-traffic.
105
+ * - **PayBy95**: enhanced 95th percentile.
106
+ * - **PayByDominantTraffic**: pay-by-dominant-traffic.
107
107
  *
108
108
  * @example
109
- * 中国站示例值:PayByBandwidth,国际站示例值:PayByTraffic
109
+ * For China site: PayByBandwidth, for International site: PayByTraffic
110
110
  */
111
111
  internetChargeType?: string;
112
112
  /**
@@ -126,7 +126,7 @@ export declare class CreateCommonBandwidthPackageRequest extends $dara.Model {
126
126
  * The minimum bandwidth commitment percentage of the Internet Shared Bandwidth instance. Set the value to **20**.
127
127
  *
128
128
  * <props="china"><ph>This parameter is required when **InternetChargeType** is set to **PayBy95**.</ph>
129
- * >This parameter is supported only on the China site.
129
+ * >Only the China site supports this parameter.
130
130
  *
131
131
  * @example
132
132
  * 20
@@ -156,17 +156,17 @@ export declare class CreateCommonBandwidthPackageRequest extends $dara.Model {
156
156
  resourceOwnerId?: number;
157
157
  /**
158
158
  * @remarks
159
- * The edition of Anti-DDoS.
159
+ * The security protection level.
160
160
  *
161
- * - If you leave this parameter empty, Anti-DDoS Origin Basic is used by default.
161
+ * - If you do not set this parameter, Anti-DDoS Origin Basic is used by default.
162
162
  *
163
163
  * - If you set this parameter to **AntiDDoS_Enhanced**, Anti-DDoS Origin Enhanced is used.
164
164
  *
165
- * <props="china"><ph>You can set this parameter when **InternetChargeType** is set to **PayBy95**.</ph>
165
+ * <props="china"><ph>This parameter can be configured when **InternetChargeType** is set to **PayBy95**.</ph>
166
166
  *
167
- * You can add up to 10 security protection levels.
167
+ * You can specify up to 10 security protection levels.
168
168
  *
169
- * > This parameter is deprecated.
169
+ * > **[Deprecated]** This parameter is deprecated.
170
170
  *
171
171
  * @example
172
172
  * AntiDDoS_Enhanced
@@ -68,7 +68,7 @@ export declare class CreateDhcpOptionsSetRequest extends $dara.Model {
68
68
  * @remarks
69
69
  * The hostname suffix. Example: example.com.
70
70
  *
71
- * After the DHCP options set is used to associate VPC, the hostname suffix is automatically synchronized to the ECS instances in the VPC.
71
+ * After you associate VPC with the DHCP options set, the hostname suffix is automatically synchronized to the ECS instances in the VPC.
72
72
  *
73
73
  * @example
74
74
  * example.com
@@ -78,7 +78,7 @@ export declare class CreateDhcpOptionsSetRequest extends $dara.Model {
78
78
  * @remarks
79
79
  * The IP addresses of DNS servers. You can specify up to four DNS server IP addresses. Separate multiple IP addresses with commas (,).
80
80
  *
81
- * >If you do not specify DNS server IP addresses, ECS instances use the DNS server IP addresses provided by Alibaba Cloud (100.100.2.136 and 100.100.2.138) by default.
81
+ * >If you do not specify DNS server IP addresses, ECS instances use the DNS server IP addresses provided by Alibaba Cloud by default (100.100.2.136 and 100.100.2.138).
82
82
  *
83
83
  * @example
84
84
  * 192.XX.XX.123
@@ -100,9 +100,9 @@ export declare class CreateDhcpOptionsSetRequest extends $dara.Model {
100
100
  * @remarks
101
101
  * The lease time of the IPv6 DHCP options set.
102
102
  *
103
- * - If the lease time is in hours, the unit is h. Valid values: **24h to 1176h** and **87600h to 175200h**. Default value: **24h**.
103
+ * - If the lease time is set in hours, the unit is h. Valid values: **24h to 1176h** and **87600h to 175200h**. Default value: **24h**.
104
104
  *
105
- * - If the lease time is in days, the unit is d. Valid values: **1d to 49d** and **3650d to 7300d**. Default value: **1d**.
105
+ * - If the lease time is set in days, the unit is d. Valid values: **1d to 49d** and **3650d to 7300d**. Default value: **1d**.
106
106
  *
107
107
  * > You must include the unit when specifying the value.
108
108
  *
@@ -114,9 +114,9 @@ export declare class CreateDhcpOptionsSetRequest extends $dara.Model {
114
114
  * @remarks
115
115
  * The lease time of the IPv4 DHCP options set.
116
116
  *
117
- * - If the lease time is in hours, the unit is h. Valid values: **24h to 1176h** and **87600h to 175200h**. Default value: **87600h**.
117
+ * - If the lease time is set in hours, the unit is h. Valid values: **24h to 1176h** and **87600h to 175200h**. Default value: **87600h**.
118
118
  *
119
- * - If the lease time is in days, the unit is d. Valid values: **1d to 49d** and **3650d to 7300d**. Default value: **3650d**.
119
+ * - If the lease time is set in days, the unit is d. Valid values: **1d to 49d** and **3650d to 7300d**. Default value: **3650d**.
120
120
  *
121
121
  * > You must include the unit when specifying the value.
122
122
  *
@@ -128,7 +128,7 @@ export declare class CreateDhcpOptionsSetRequest extends $dara.Model {
128
128
  ownerId?: number;
129
129
  /**
130
130
  * @remarks
131
- * The region in which the DHCP options set resides.
131
+ * The region where the DHCP options set resides.
132
132
  *
133
133
  * You can call [DescribeRegions](https://help.aliyun.com/document_detail/36063.html) to query the region ID.
134
134
  *
@@ -2,7 +2,7 @@ import * as $dara from '@darabonba/typescript';
2
2
  export declare class CreateFlowLogRequestTag extends $dara.Model {
3
3
  /**
4
4
  * @remarks
5
- * The tag key of the resource. You can specify up to 20 tag keys. Do not specify an empty string.
5
+ * The tag key of the resource. You can specify up to 20 tag keys. Do not specify an empty string for this parameter.
6
6
  *
7
7
  * A tag key can be up to 128 characters in length and cannot start with `aliyun` or `acs:`. It cannot contain `http://` or `https://`.
8
8
  *
@@ -12,7 +12,7 @@ export declare class CreateFlowLogRequestTag extends $dara.Model {
12
12
  key?: string;
13
13
  /**
14
14
  * @remarks
15
- * The tag value of the resource. You can specify up to 20 tag values. You can specify an empty string.
15
+ * The tag value of the resource. You can specify up to 20 tag values. The tag value can be an empty string.
16
16
  *
17
17
  * The tag value can be up to 128 characters in length and cannot start with `aliyun` or `acs:`. It cannot contain `http://` or `https://`.
18
18
  *
@@ -125,9 +125,9 @@ export declare class CreateFlowLogRequest extends $dara.Model {
125
125
  resourceOwnerId?: number;
126
126
  /**
127
127
  * @remarks
128
- * The type of the resource whose traffic you want to catch. Valid values:
128
+ * The type of the resource whose traffic you want to capture. Valid values:
129
129
  *
130
- * - **NetworkInterface**: network interface controller (NIC).
130
+ * - **NetworkInterface**: network interface controllers (NICs).
131
131
  *
132
132
  * - **VSwitch**: all network interface controllers (NICs) in a vSwitch.
133
133
  *
@@ -146,10 +146,18 @@ export declare class CreateFlowLogRequest extends $dara.Model {
146
146
  tag?: CreateFlowLogRequestTag[];
147
147
  /**
148
148
  * @remarks
149
- * The traffic path to capture. Valid values:
150
- *
151
- * - **all**: captures all traffic.
152
- * - **internetGateway**: captures Internet traffic.
149
+ * The traffic path to collect. Valid values:
150
+ *
151
+ * - **all** (default): all scenarios.
152
+ * - **internetGateway**: traffic to access the Internet.
153
+ * - **natGateway**: traffic through NAT gateway.
154
+ * - **vpnGateway**: traffic through VPN gateway.
155
+ * - **transitRouter**: traffic through TR.
156
+ * - **gatewayEndpoint**: traffic through gateway endpoint to access Alibaba Cloud services.
157
+ * - **vbr**: traffic through Virtual Border Router (VBR) to access Express Connect circuits.
158
+ * - **ecr**: traffic through Express Connect Router (ECR).
159
+ * - **ipv4Gateway**: traffic through IPv4 gateway to access the Internet.
160
+ * - **gatewayLoadBalancerEndpoint**: traffic through Gateway Load Balancer endpoint (GWLBe).
153
161
  */
154
162
  trafficPath?: string[];
155
163
  /**
@@ -160,7 +168,7 @@ export declare class CreateFlowLogRequest extends $dara.Model {
160
168
  *
161
169
  * - **Allow**: traffic allowed by access control.
162
170
  *
163
- * - **Drop**: traffic deny by access control.
171
+ * - **Drop**: traffic denied by access control.
164
172
  *
165
173
  * This parameter is required.
166
174
  *
@@ -1 +1 @@
1
- {"version":3,"file":"CreateFlowLogRequest.js","sourceRoot":"","sources":["../../src/models/CreateFlowLogRequest.ts"],"names":[],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAAA,6CAA6C;AAC7C,6DAA+C;AAG/C,MAAa,uBAAwB,SAAQ,KAAK,CAAC,KAAK;IAqBtD,MAAM,CAAC,KAAK;QACV,OAAO;YACL,GAAG,EAAE,KAAK;YACV,KAAK,EAAE,OAAO;SACf,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,GAAG,EAAE,QAAQ;YACb,KAAK,EAAE,QAAQ;SAChB,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AA1CD,0DA0CC;AAED,MAAa,oBAAqB,SAAQ,KAAK,CAAC,KAAK;IAyInD,MAAM,CAAC,KAAK;QACV,OAAO;YACL,mBAAmB,EAAE,qBAAqB;YAC1C,WAAW,EAAE,aAAa;YAC1B,WAAW,EAAE,aAAa;YAC1B,SAAS,EAAE,WAAW;YACtB,SAAS,EAAE,WAAW;YACtB,YAAY,EAAE,cAAc;YAC5B,YAAY,EAAE,cAAc;YAC5B,OAAO,EAAE,SAAS;YAClB,WAAW,EAAE,aAAa;YAC1B,QAAQ,EAAE,UAAU;YACpB,eAAe,EAAE,iBAAiB;YAClC,UAAU,EAAE,YAAY;YACxB,oBAAoB,EAAE,sBAAsB;YAC5C,eAAe,EAAE,iBAAiB;YAClC,YAAY,EAAE,cAAc;YAC5B,GAAG,EAAE,KAAK;YACV,WAAW,EAAE,aAAa;YAC1B,WAAW,EAAE,aAAa;SAC3B,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,mBAAmB,EAAE,QAAQ;YAC7B,WAAW,EAAE,QAAQ;YACrB,WAAW,EAAE,QAAQ;YACrB,SAAS,EAAE,QAAQ;YACnB,SAAS,EAAE,QAAQ;YACnB,YAAY,EAAE,QAAQ;YACtB,YAAY,EAAE,QAAQ;YACtB,OAAO,EAAE,QAAQ;YACjB,WAAW,EAAE,QAAQ;YACrB,QAAQ,EAAE,QAAQ;YAClB,eAAe,EAAE,QAAQ;YACzB,UAAU,EAAE,QAAQ;YACpB,oBAAoB,EAAE,QAAQ;YAC9B,eAAe,EAAE,QAAQ;YACzB,YAAY,EAAE,QAAQ;YACtB,GAAG,EAAE,EAAE,MAAM,EAAE,OAAO,EAAE,UAAU,EAAE,uBAAuB,EAAE;YAC7D,WAAW,EAAE,EAAE,MAAM,EAAE,OAAO,EAAE,UAAU,EAAE,QAAQ,EAAE;YACtD,WAAW,EAAE,QAAQ;SACtB,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,IAAG,KAAK,CAAC,OAAO,CAAC,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC;YAC3B,KAAK,CAAC,KAAK,CAAC,aAAa,CAAC,IAAI,CAAC,GAAG,CAAC,CAAC;QACtC,CAAC;QACD,IAAG,KAAK,CAAC,OAAO,CAAC,IAAI,CAAC,WAAW,CAAC,EAAE,CAAC;YACnC,KAAK,CAAC,KAAK,CAAC,aAAa,CAAC,IAAI,CAAC,WAAW,CAAC,CAAC;QAC9C,CAAC;QACD,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AApMD,oDAoMC"}
1
+ {"version":3,"file":"CreateFlowLogRequest.js","sourceRoot":"","sources":["../../src/models/CreateFlowLogRequest.ts"],"names":[],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAAA,6CAA6C;AAC7C,6DAA+C;AAG/C,MAAa,uBAAwB,SAAQ,KAAK,CAAC,KAAK;IAqBtD,MAAM,CAAC,KAAK;QACV,OAAO;YACL,GAAG,EAAE,KAAK;YACV,KAAK,EAAE,OAAO;SACf,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,GAAG,EAAE,QAAQ;YACb,KAAK,EAAE,QAAQ;SAChB,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AA1CD,0DA0CC;AAED,MAAa,oBAAqB,SAAQ,KAAK,CAAC,KAAK;IAiJnD,MAAM,CAAC,KAAK;QACV,OAAO;YACL,mBAAmB,EAAE,qBAAqB;YAC1C,WAAW,EAAE,aAAa;YAC1B,WAAW,EAAE,aAAa;YAC1B,SAAS,EAAE,WAAW;YACtB,SAAS,EAAE,WAAW;YACtB,YAAY,EAAE,cAAc;YAC5B,YAAY,EAAE,cAAc;YAC5B,OAAO,EAAE,SAAS;YAClB,WAAW,EAAE,aAAa;YAC1B,QAAQ,EAAE,UAAU;YACpB,eAAe,EAAE,iBAAiB;YAClC,UAAU,EAAE,YAAY;YACxB,oBAAoB,EAAE,sBAAsB;YAC5C,eAAe,EAAE,iBAAiB;YAClC,YAAY,EAAE,cAAc;YAC5B,GAAG,EAAE,KAAK;YACV,WAAW,EAAE,aAAa;YAC1B,WAAW,EAAE,aAAa;SAC3B,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,mBAAmB,EAAE,QAAQ;YAC7B,WAAW,EAAE,QAAQ;YACrB,WAAW,EAAE,QAAQ;YACrB,SAAS,EAAE,QAAQ;YACnB,SAAS,EAAE,QAAQ;YACnB,YAAY,EAAE,QAAQ;YACtB,YAAY,EAAE,QAAQ;YACtB,OAAO,EAAE,QAAQ;YACjB,WAAW,EAAE,QAAQ;YACrB,QAAQ,EAAE,QAAQ;YAClB,eAAe,EAAE,QAAQ;YACzB,UAAU,EAAE,QAAQ;YACpB,oBAAoB,EAAE,QAAQ;YAC9B,eAAe,EAAE,QAAQ;YACzB,YAAY,EAAE,QAAQ;YACtB,GAAG,EAAE,EAAE,MAAM,EAAE,OAAO,EAAE,UAAU,EAAE,uBAAuB,EAAE;YAC7D,WAAW,EAAE,EAAE,MAAM,EAAE,OAAO,EAAE,UAAU,EAAE,QAAQ,EAAE;YACtD,WAAW,EAAE,QAAQ;SACtB,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,IAAG,KAAK,CAAC,OAAO,CAAC,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC;YAC3B,KAAK,CAAC,KAAK,CAAC,aAAa,CAAC,IAAI,CAAC,GAAG,CAAC,CAAC;QACtC,CAAC;QACD,IAAG,KAAK,CAAC,OAAO,CAAC,IAAI,CAAC,WAAW,CAAC,EAAE,CAAC;YACnC,KAAK,CAAC,KAAK,CAAC,aAAa,CAAC,IAAI,CAAC,WAAW,CAAC,CAAC;QAC9C,CAAC;QACD,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AA5MD,oDA4MC"}
@@ -2,7 +2,7 @@ import * as $dara from '@darabonba/typescript';
2
2
  export declare class CreateRouteEntriesRequestRouteEntries extends $dara.Model {
3
3
  /**
4
4
  * @remarks
5
- * The description of the custom route entry. You can specify a maximum of 50 descriptions.
5
+ * The description of the custom route entry. You can specify up to 50 descriptions.
6
6
  *
7
7
  * The description must be 1 to 256 characters in length and cannot start with `http://` or `https://`.
8
8
  *
@@ -12,9 +12,9 @@ export declare class CreateRouteEntriesRequestRouteEntries extends $dara.Model {
12
12
  description?: string;
13
13
  /**
14
14
  * @remarks
15
- * The destination CIDR block of the custom route entry. Both IPv4 and IPv6 destination CIDR blocks are supported. You can specify a maximum of 50 destination CIDR blocks. The following requirements must be met:
15
+ * The destination CIDR block of the custom route entry. Both IPv4 and IPv6 destination CIDR blocks are supported. You can specify up to 50 destination CIDR blocks. The following requirements must be met:
16
16
  *
17
- * - The destination CIDR block cannot point to or be contained by 100.64.0.0/10.
17
+ * - The destination CIDR block cannot point to 100.64.0.0/10 or be contained by 100.64.0.0/10.
18
18
  *
19
19
  * - The destination CIDR blocks of different route entries in the same route table must be unique.
20
20
  *
@@ -26,7 +26,7 @@ export declare class CreateRouteEntriesRequestRouteEntries extends $dara.Model {
26
26
  dstCidrBlock?: string;
27
27
  /**
28
28
  * @remarks
29
- * The version of the IP protocol. You can specify a maximum of 50 IP protocol versions. Valid values:
29
+ * The version of the IP protocol. You can specify up to 50 IP protocol versions. Valid values:
30
30
  *
31
31
  * - **4**: IPv4.
32
32
  * - **6**: IPv6.
@@ -37,7 +37,7 @@ export declare class CreateRouteEntriesRequestRouteEntries extends $dara.Model {
37
37
  ipVersion?: number;
38
38
  /**
39
39
  * @remarks
40
- * The name of the custom route entry to add. You can specify a maximum of 50 names.
40
+ * The name of the custom route entry to add. You can specify up to 50 names.
41
41
  *
42
42
  * The name must be 1 to 128 characters in length and cannot start with `http://` or `https://`.
43
43
  *
@@ -47,8 +47,8 @@ export declare class CreateRouteEntriesRequestRouteEntries extends $dara.Model {
47
47
  name?: string;
48
48
  /**
49
49
  * @remarks
50
- * The ID of the next hop instance for the custom route entry. You can specify a maximum of 50 instance IDs.
51
- * > If NextHopType is set to ECR, you can call [DescribeExpressConnectRouterAssociation](https://help.aliyun.com/document_detail/2712069.html) to obtain the AssociationId as the next hop ID.
50
+ * The ID of the next hop instance of the custom route entry. You can specify up to 50 instance IDs.
51
+ * > If NextHopType is set to ECR, you can call the [DescribeExpressConnectRouterAssociation](https://help.aliyun.com/document_detail/2712069.html) operation to obtain the AssociationId as the next hop ID.
52
52
  *
53
53
  * This parameter is required.
54
54
  *
@@ -58,9 +58,9 @@ export declare class CreateRouteEntriesRequestRouteEntries extends $dara.Model {
58
58
  nextHop?: string;
59
59
  /**
60
60
  * @remarks
61
- * The type of the next hop for the custom route entry. You can specify a maximum of 50 next hop types. Valid values:
61
+ * The type of the next hop of the custom route entry. You can specify up to 50 next hop types. Valid values:
62
62
  *
63
- * - **Instance** (default): ECS instance. Forwards traffic to an ECS instance.
63
+ * - **Instance** (default): ECS instance.
64
64
  *
65
65
  * - **HaVip**: high-availability virtual IP address.
66
66
  *
@@ -74,15 +74,15 @@ export declare class CreateRouteEntriesRequestRouteEntries extends $dara.Model {
74
74
  *
75
75
  * - **NatGateway**: NAT gateway.
76
76
  *
77
- * - **Attachment**: transit router. Forwards traffic to a transit router.
77
+ * - **Attachment**: forward router.
78
78
  *
79
79
  * - **VpcPeer**: VPC peering connection.
80
80
  * - **Ipv4Gateway**: IPv4 gateway.
81
81
  * - **GatewayEndpoint**: gateway endpoint.
82
- * - **CenBasic**: CEN that does not support transit routers.
82
+ * - **CenBasic**: CEN that does not support forward routers.
83
83
  * - **Ecr**: Express Connect Router (ECR).
84
84
  * - **GatewayLoadBalancerEndpoint**: Gateway Load Balancer endpoint (GWLBe).
85
- * - **RouteTargetGroup**: routing target group.
85
+ * - **RouteTargetGroup**: route target group.
86
86
  *
87
87
  * This parameter is required.
88
88
  *
@@ -92,7 +92,7 @@ export declare class CreateRouteEntriesRequestRouteEntries extends $dara.Model {
92
92
  nextHopType?: string;
93
93
  /**
94
94
  * @remarks
95
- * The ID of the route table to which you want to add the custom route entry. You can specify a maximum of 50 route table IDs.
95
+ * The ID of the route table to which you want to add custom route entries. You can specify up to 50 route table IDs.
96
96
  *
97
97
  * This parameter is required.
98
98
  *
@@ -116,18 +116,18 @@ export declare class CreateRouteEntriesRequest extends $dara.Model {
116
116
  * @remarks
117
117
  * Specifies whether to perform a dry run. Valid values:
118
118
  *
119
- * **true**: performs a dry run without creating routes. The system checks the AccessKey pair, the authorization of the Resource Access Management (RAM) user, and the required parameters. If the check fails, the corresponding error is returned. If the check passes, the `DryRunOperation` error code is returned.
119
+ * **true**: performs a dry run without creating routes. The system checks the AccessKey pair, the authorization of the Resource Access Management (RAM) user, and the required parameters. If the check fails, the corresponding error is returned. If the check passes, the error code `DryRunOperation` is returned.
120
120
  *
121
- * **false** (default): sends a Normal request. If the check passes, a 2xx HTTP status code is returned and the routes are created.
121
+ * **false** (default): performs a normal request and sends the request. If the check passes, a 2xx HTTP status code is returned and the routes are created.
122
122
  */
123
123
  dryRun?: boolean;
124
124
  ownerAccount?: string;
125
125
  ownerId?: number;
126
126
  /**
127
127
  * @remarks
128
- * The region ID of the route table.
128
+ * The ID of the region where the route table resides.
129
129
  *
130
- * You can call [DescribeRegions](https://help.aliyun.com/document_detail/36063.html) to query the most recent region list.
130
+ * You can call the [DescribeRegions](https://help.aliyun.com/document_detail/36063.html) operation to query the region ID.
131
131
  *
132
132
  * This parameter is required.
133
133
  *
@@ -10,7 +10,7 @@ export declare class CreateRouteEntriesResponseBodyFailedRouteEntries extends $d
10
10
  dstCidrBlock?: string;
11
11
  /**
12
12
  * @remarks
13
- * The error code.
13
+ * The error code of the failure.
14
14
  *
15
15
  * @example
16
16
  * VPC_ROUTE_ENTRY_CIDR_BLOCK_DUPLICATE
@@ -18,7 +18,7 @@ export declare class CreateRouteEntriesResponseBodyFailedRouteEntries extends $d
18
18
  failedCode?: string;
19
19
  /**
20
20
  * @remarks
21
- * The error message.
21
+ * The error message of the failure.
22
22
  *
23
23
  * @example
24
24
  * Specified CIDR block is already exists, entry.cidrBlock=xxxx
@@ -67,7 +67,7 @@ export declare class CreateRouteEntriesResponseBody extends $dara.Model {
67
67
  requestId?: string;
68
68
  /**
69
69
  * @remarks
70
- * The instance IDs returned for the successfully added custom route entries. The routing information is included.
70
+ * The routing instance IDs returned for the custom route entries that were successfully added.
71
71
  */
72
72
  routeEntryIds?: string[];
73
73
  /**
@@ -18,7 +18,7 @@ export declare class CreateRouteEntryRequestNextHopList extends $dara.Model {
18
18
  nextHopType?: string;
19
19
  /**
20
20
  * @remarks
21
- * The weight of the next hop of the ECMP route.
21
+ * The weight of the next hop for the ECMP route.
22
22
  *
23
23
  * @example
24
24
  * 10
@@ -40,9 +40,9 @@ export declare class CreateRouteEntryRequest extends $dara.Model {
40
40
  * @remarks
41
41
  * The client token that is used to ensure the idempotence of the request.
42
42
  *
43
- * You can use the client to generate the token, but you must make sure that the token is unique among different requests. The token can contain only ASCII characters.
43
+ * Generate a parameter value from your client. Make sure that the value is unique among different requests. The ClientToken value can contain only ASCII characters.
44
44
  *
45
- * > If you do not specify this parameter, the system automatically uses the **RequestId** of the API request as the **ClientToken**. The **RequestId** may be different for each API request.
45
+ * > If you do not specify this parameter, the system uses the **RequestId** of the API request as the **ClientToken**. The **RequestId** may be different for each API request.
46
46
  *
47
47
  * @example
48
48
  * 02fb3da4-130e-11e9-8e44-001****
@@ -60,7 +60,7 @@ export declare class CreateRouteEntryRequest extends $dara.Model {
60
60
  description?: string;
61
61
  /**
62
62
  * @remarks
63
- * The destination CIDR block of the custom route entry. IPv4 CIDR blocks, IPv6 CIDR blocks, prefix list destination CIDR blocks, and prefix list instance IDs are supported. The following requirements must be met:
63
+ * The destination CIDR block of the custom route entry. IPv4 CIDR blocks, IPv6 CIDR blocks, destination CIDR blocks of prefix lists, and instance IDs of prefix lists are supported. The following requirements must be met:
64
64
  *
65
65
  * - The destination CIDR block cannot point to or be contained by 100.64.0.0/10.
66
66
  *
@@ -75,8 +75,8 @@ export declare class CreateRouteEntryRequest extends $dara.Model {
75
75
  /**
76
76
  * @remarks
77
77
  * Specifies whether to perform a dry run. Valid values:
78
- * - **true**: performs a dry run. The system checks the required parameters, request format, and business restrictions. If the request fails the dry run, an error message is returned. If the request passes the dry run, the `DryRunOperation` error code is returned.
79
- * - **false** (default): sends a normal request. After the request passes the dry run, an HTTP 2xx status code is returned and the route is created.
78
+ * - **true**: performs a dry run without creating the route entry. The system checks required parameters, request format, and service limits. If the check fails, the corresponding error is returned. If the check succeeds, the `DryRunOperation` error code is returned.
79
+ * - **false** (default): sends the request. After the request passes the check, an HTTP 2xx status code is returned and the operation is performed.
80
80
  *
81
81
  * @example
82
82
  * false
@@ -94,7 +94,7 @@ export declare class CreateRouteEntryRequest extends $dara.Model {
94
94
  nextHopId?: string;
95
95
  /**
96
96
  * @remarks
97
- * The information about the next hops.
97
+ * The information about the next hop.
98
98
  */
99
99
  nextHopList?: CreateRouteEntryRequestNextHopList[];
100
100
  /**
@@ -105,7 +105,7 @@ export declare class CreateRouteEntryRequest extends $dara.Model {
105
105
  *
106
106
  * - **HaVip**: high-availability virtual IP address.
107
107
  *
108
- * - **RouterInterface**: router interface.
108
+ * - **RouterInterface**: vRouter interface.
109
109
  *
110
110
  * - **NetworkInterface**: network interface controller (NIC).
111
111
  *
@@ -4,9 +4,9 @@ export declare class CreateVpnPbrRouteEntryRequest extends $dara.Model {
4
4
  * @remarks
5
5
  * The client token that is used to ensure the idempotence of the request.
6
6
  *
7
- * You can use the client to generate the token, but you must make sure that the token is unique among different requests. The ClientToken value can contain only ASCII characters.
7
+ * You can use the client to generate the token, but you must make sure that the token is unique among different requests. The client token can contain only ASCII characters.
8
8
  *
9
- * > If you do not specify this parameter, the system uses the **RequestId** of the API request as the **ClientToken**. The **RequestId** may be different for each API request.
9
+ * > If you do not specify this parameter, the system automatically uses the **RequestId** of the API request as the **ClientToken**. The **RequestId** may be different for each API request.
10
10
  *
11
11
  * @example
12
12
  * d7d24a21-f4ba-4454-9173-b3****
@@ -24,9 +24,9 @@ export declare class CreateVpnPbrRouteEntryRequest extends $dara.Model {
24
24
  description?: string;
25
25
  /**
26
26
  * @remarks
27
- * Specifies whether to perform a dry run. Valid values:
28
- * - **true**: performs a dry run without creating the route. The system checks the required parameters, request format, and service limits. If the check fails, the corresponding error is returned. If the check succeeds, the error code `DryRunOperation` is returned.
29
- * - **false** (default): performs a dry run and sends the request. If the check succeeds, an HTTP 2xx status code is returned and the operation is performed.
27
+ * Specifies whether to perform a dry run, without performing the actual request. Valid values:
28
+ * - **true**: performs only a dry run. The system checks the request for potential issues, including missing parameter values, incorrect request syntax, and service limits. If the request fails the dry run, an error code is returned. If the request passes the dry run, the error code `DryRunOperation` is returned.
29
+ * - **false** (default): performs a dry run and performs the actual request. If the request passes the dry run, an HTTP 2xx status code is returned and the operation is performed.
30
30
  *
31
31
  * @example
32
32
  * false
@@ -54,9 +54,9 @@ export declare class CreateVpnPbrRouteEntryRequest extends $dara.Model {
54
54
  ownerId?: number;
55
55
  /**
56
56
  * @remarks
57
- * The policy priority of the policy-based route. Valid values: **1** to **100**. Default value: **10**.
57
+ * The policy priority of the policy-based routing entry. Valid values: **1** to **100**. Default value: **10**.
58
58
  *
59
- * A smaller policy priority value indicates a higher routing priority.
59
+ * A smaller value indicates a higher policy priority for the routing entry.
60
60
  *
61
61
  * @example
62
62
  * 10
@@ -68,7 +68,7 @@ export declare class CreateVpnPbrRouteEntryRequest extends $dara.Model {
68
68
  *
69
69
  * - **true**: Publishes the policy-based route to the VPC route table. The system publishes the route only to the VPC system route table, not to VPC custom route tables.
70
70
  *
71
- * If you want the VPC custom route table to contain this route, manually add it. For more information, see [CreateRouteEntry](https://help.aliyun.com/document_detail/448722.html).
71
+ * If you want the VPC custom route table to contain this route, manually add the route. For more information, see [CreateRouteEntry](https://help.aliyun.com/document_detail/448722.html).
72
72
  *
73
73
  * - **false**: Does not publish the policy-based route to the VPC route table.
74
74
  *
@@ -124,17 +124,17 @@ export declare class CreateVpnPbrRouteEntryRequest extends $dara.Model {
124
124
  vpnGatewayId?: string;
125
125
  /**
126
126
  * @remarks
127
- * The weight of the policy-based route.
127
+ * The weight of the policy-based routing entry.
128
128
  *
129
- * If you use the same VPN gateway instance to establish active/standby IPsec-VPN connections, you can specify the weight of the policy-based route to specify the active and standby links. A policy-based route with a weight of 100 is the active link by default, and a policy-based route with a weight of 0 is the standby link by default.
129
+ * When you use the same VPN gateway instance to establish active/standby IPsec-VPN connections, you can specify the active and standby links by configuring the weight of the policy-based routing entry. A policy-based routing entry with a weight of 100 is the active link by default, and a policy-based routing entry with a weight of 0 is the standby link by default.
130
130
  *
131
- * You can configure health checks for the IPsec-VPN connection to automatically detect link connectivity. If the active link is unavailable, the system automatically switches traffic to the standby link, which ensures high availability of the cloud connection. For more information, see [CreateVpnConnection](https://help.aliyun.com/document_detail/120391.html).
131
+ * You can configure health checks for the IPsec-VPN connection to automatically detect link connectivity. If the active link is down, the system automatically switches traffic to the standby link, ensuring high availability of the cloud connection. For more information, see [CreateVpnConnection](https://help.aliyun.com/document_detail/120391.html).
132
132
  *
133
- * - **100**: The IPsec-VPN connection associated with the policy-based route serves as the active link.
134
- * - **0**: The IPsec-VPN connection associated with the policy-based route serves as the standby link.
133
+ * - **100**: The IPsec-VPN connection associated with the policy-based routing entry serves as the active link.
134
+ * - **0**: The IPsec-VPN connection associated with the policy-based routing entry serves as the standby link.
135
135
  *
136
- * > - When you specify active and standby links, the source and destination CIDR blocks of the active and standby policy-based routes must be the same.
137
- * > - For VPN gateway instances that support dual-tunnel pattern IPsec-VPN connections, you do not need to configure this parameter. A dual-tunnel pattern IPsec-VPN connection contains two tunnels that automatically form active/standby links. You do not need to specify active/standby links by configuring this parameter. If you configure this parameter, the parameter settings do not take effect.
136
+ * > - When you specify active and standby links, the source and destination CIDR blocks of the active and standby policy-based routing entries must be the same.
137
+ * > - For VPN gateway instances that support dual-tunnel pattern IPsec-VPN connections, you do not need to configure this parameter settings. A dual-tunnel pattern IPsec-VPN connection contains two tunnels that automatically form active/standby links. You do not need to specify active/standby links by configuring this parameter. If you configure this parameter, the configuration does not take effect.
138
138
  *
139
139
  * This parameter is required.
140
140
  *
@@ -4,7 +4,7 @@ export declare class CreateVpnPbrRouteEntryResponseBody extends $dara.Model {
4
4
  * @remarks
5
5
  * The timestamp when the policy-based route was created. Unit: milliseconds.
6
6
  *
7
- * The timestamp follows the UNIX time format, which represents the total number of milliseconds that have elapsed since January 1, 1970, 00:00:00 UTC.
7
+ * The timestamp follows the UNIX timestamp format, which represents the total number of milliseconds that have elapsed since January 1, 1970, 00:00:00 UTC.
8
8
  *
9
9
  * @example
10
10
  * 1492747187000
@@ -36,7 +36,7 @@ export declare class CreateVpnPbrRouteEntryResponseBody extends $dara.Model {
36
36
  overlayMode?: string;
37
37
  /**
38
38
  * @remarks
39
- * The policy priority of the policy-based route.
39
+ * The policy priority of the policy-based routing entry.
40
40
  *
41
41
  * @example
42
42
  * 10
@@ -80,7 +80,7 @@ export declare class CreateVpnPbrRouteEntryResponseBody extends $dara.Model {
80
80
  state?: string;
81
81
  /**
82
82
  * @remarks
83
- * The VPN gateway instance ID.
83
+ * The instance ID of the VPN gateway.
84
84
  *
85
85
  * @example
86
86
  * vpn-bp1cmw7jh1nfe43m9****
@@ -24,9 +24,9 @@ export declare class CreateVpnRouteEntryRequest extends $dara.Model {
24
24
  description?: string;
25
25
  /**
26
26
  * @remarks
27
- * Specifies whether to perform a dry run. Valid values:
28
- * - **true**: performs a dry run without creating the route. The system checks the required parameters, request syntax, and business restrictions. If the check fails, the corresponding error is returned. If the check passes, the error code `DryRunOperation` is returned.
29
- * - **false** (default): performs a dry run and sends the request. If the check passes, an HTTP 2xx status code is returned and the operation is performed.
27
+ * Specifies whether to perform a dry run, without performing the actual request. Valid values:
28
+ * - **true**: performs only a dry run. The system checks the request for potential issues, including missing parameter values, incorrect request syntax, and service limits. If the request fails the dry run, an error code is returned. If the request passes the dry run, the `DryRunOperation` error code is returned.
29
+ * - **false** (default): performs a dry run and performs the actual request. If the request passes the dry run, an HTTP 2xx status code is returned and the operation is performed.
30
30
  *
31
31
  * @example
32
32
  * false
@@ -44,7 +44,7 @@ export declare class CreateVpnRouteEntryRequest extends $dara.Model {
44
44
  nextHop?: string;
45
45
  /**
46
46
  * @remarks
47
- * The tunneling protocol. Set the value to **Ipsec** (IPsec tunneling).
47
+ * The tunneling protocol. Set the value to **Ipsec** (IPsec tunneling protocol).
48
48
  *
49
49
  * @example
50
50
  * Ipsec
@@ -105,7 +105,7 @@ export declare class CreateVpnRouteEntryRequest extends $dara.Model {
105
105
  vpnGatewayId?: string;
106
106
  /**
107
107
  * @remarks
108
- * The weight of the destination route.
108
+ * The weight of the destination routing.
109
109
  *
110
110
  * If you use the same VPN gateway instance to establish active/standby IPsec-VPN connections, you can specify the active and standby links by configuring the weight of the destination routing. A destination route with a weight of 100 is the active link by default, and a destination route with a weight of 0 is the standby link by default.
111
111
  *
@@ -114,8 +114,8 @@ export declare class CreateVpnRouteEntryRequest extends $dara.Model {
114
114
  * - **100**: The IPsec-VPN connection associated with the destination route serves as the active link.
115
115
  * - **0**: The IPsec-VPN connection associated with the destination route serves as the standby link.
116
116
  *
117
- * > - When you specify active and standby links, the active and standby destination routes must have the same destination CIDR block, different next hops, and different weights.
118
- * > - For VPN gateway instances that support dual-tunnel pattern IPsec-VPN connections, you do not need to configure this parameter. A dual-tunnel pattern IPsec-VPN connection contains two tunnels that automatically form active/standby links. You do not need to specify active/standby links by using the parameter settings. If you configure this parameter, the parameter settings do not take effect.
117
+ * > - When you specify active/standby links, the active and standby destination routes must have the same destination CIDR block, different next hops, and different weights.
118
+ * > - For VPN gateway instances that support dual-tunnel pattern IPsec-VPN connections, you do not need to configure this parameter. A dual-tunnel pattern IPsec-VPN connection contains two tunnels that automatically form active/standby links. You do not need to specify active/standby links by configuring the parameter settings. If you configure this parameter, the parameter settings do not take effect.
119
119
  *
120
120
  * This parameter is required.
121
121
  *
@@ -4,7 +4,7 @@ export declare class CreateVpnRouteEntryResponseBody extends $dara.Model {
4
4
  * @remarks
5
5
  * The timestamp when the destination route was created. Unit: milliseconds.
6
6
  *
7
- * The timestamp follows the UNIX timestamp format, which represents the total number of milliseconds that have elapsed since January 1, 1970, 00:00:00 UTC to the time when the destination route was created.
7
+ * The timestamp follows the UNIX time format, which represents the total number of milliseconds that have elapsed since January 1, 1970, 00:00:00 UTC, to the time when the destination route was created.
8
8
  *
9
9
  * @example
10
10
  * 1492747187000
@@ -28,7 +28,7 @@ export declare class CreateVpnRouteEntryResponseBody extends $dara.Model {
28
28
  nextHop?: string;
29
29
  /**
30
30
  * @remarks
31
- * The tunneling protocol. Set the value to **Ipsec** (IPsec tunneling).
31
+ * The tunneling protocol. Set the value to **Ipsec** (IPsec tunneling protocol).
32
32
  *
33
33
  * @example
34
34
  * Ipsec