@alicloud/vpc20160428 6.7.2 → 6.8.0

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
package/dist/client.d.ts CHANGED
@@ -2121,8 +2121,33 @@ export declare class CreateVpnAttachmentRequestTags extends $dara.Model {
2121
2121
  });
2122
2122
  }
2123
2123
  export declare class CreateVpnAttachmentRequestTunnelOptionsSpecificationTunnelBgpConfig extends $dara.Model {
2124
+ /**
2125
+ * @remarks
2126
+ * The ANS of the tunnel on the Alibaba Cloud side. Valid values: **1** to **4294967295**. Default value: **45104**.
2127
+ *
2128
+ * > We recommend that you use a private ASN to establish BGP connections to Alibaba Cloud. Refer to the relevant documentation for the private ASN range.
2129
+ *
2130
+ * @example
2131
+ * 65530
2132
+ */
2124
2133
  localAsn?: number;
2134
+ /**
2135
+ * @remarks
2136
+ * The BGP IP address of the tunnel on the Alibaba Cloud side. The address is an IP address that falls within the BGP CIDR block.
2137
+ *
2138
+ * @example
2139
+ * 169.254.10.1
2140
+ */
2125
2141
  localBgpIp?: string;
2142
+ /**
2143
+ * @remarks
2144
+ * The BGP CIDR block of the tunnel. The CIDR block must fall into 169.254.0.0/16 and the mask of the CIDR block must be 30 bits in length. The CIDR block cannot be 169.254.0.0/30, 169.254.1.0/30, 169.254.2.0/30, 169.254.3.0/30, 169.254.4.0/30, 169.254.5.0/30, 169.254.6.0/30, or 169.254.169.252/30.
2145
+ *
2146
+ * > The two tunnels of an IPsec-VPN connection must use different CIDR blocks.
2147
+ *
2148
+ * @example
2149
+ * 169.254.10.0/30
2150
+ */
2126
2151
  tunnelCidr?: string;
2127
2152
  static names(): {
2128
2153
  [key: string]: string;
@@ -2136,14 +2161,94 @@ export declare class CreateVpnAttachmentRequestTunnelOptionsSpecificationTunnelB
2136
2161
  });
2137
2162
  }
2138
2163
  export declare class CreateVpnAttachmentRequestTunnelOptionsSpecificationTunnelIkeConfig extends $dara.Model {
2164
+ /**
2165
+ * @remarks
2166
+ * The authentication algorithm that is used in Phase 1 negotiations. Valid values: **md5**, **sha1**, **sha256**, **sha384**, and **sha512**. Default value: **sha1**.
2167
+ *
2168
+ * @example
2169
+ * sha1
2170
+ */
2139
2171
  ikeAuthAlg?: string;
2172
+ /**
2173
+ * @remarks
2174
+ * The encryption algorithm that is used in Phase 1 negotiations. Valid values: **aes**, **aes192**, **aes256**, **des**, and **3des**. Default value: **aes**.
2175
+ *
2176
+ * @example
2177
+ * aes
2178
+ */
2140
2179
  ikeEncAlg?: string;
2180
+ /**
2181
+ * @remarks
2182
+ * The SA lifetime as a result of Phase 1 negotiations. Unit: seconds.
2183
+ *
2184
+ * Valid values: **0** to **86400**. Default value: **86400**.
2185
+ *
2186
+ * @example
2187
+ * 86400
2188
+ */
2141
2189
  ikeLifetime?: number;
2190
+ /**
2191
+ * @remarks
2192
+ * The negotiation mode of IKE. Valid values: **main** and **aggressive**. Default value: **main**.
2193
+ *
2194
+ * * **main:** This mode offers higher security during negotiations.
2195
+ * * **aggressive**: This mode is faster with a higher success rate.
2196
+ *
2197
+ * @example
2198
+ * main
2199
+ */
2142
2200
  ikeMode?: string;
2201
+ /**
2202
+ * @remarks
2203
+ * The Diffie-Hellman key exchange algorithm that is used in Phase 1 negotiations. Default value: **group2**.\\
2204
+ * Valid values: **group1**, **group2**, **group5**, and **group14**.
2205
+ *
2206
+ * @example
2207
+ * group2
2208
+ */
2143
2209
  ikePfs?: string;
2210
+ /**
2211
+ * @remarks
2212
+ * The version of the IKE protocol. Valid values: **ikev1** and **ikev2**. Default value: **ikev2**.
2213
+ *
2214
+ * Compared with IKEv1, IKEv2 simplifies the SA negotiation process and provides better support for scenarios with multiple CIDR blocks.
2215
+ *
2216
+ * @example
2217
+ * ikev2
2218
+ */
2144
2219
  ikeVersion?: string;
2220
+ /**
2221
+ * @remarks
2222
+ * The identifier of the tunnel on the Alibaba Cloud side, which is used in Phase 1 negotiations. The identifier cannot exceed 100 characters in length and cannot contain spaces. The default value is the IP address of the tunnel.
2223
+ *
2224
+ * **LocalId** supports fully qualified domain names (FQDNs). If you use an FQDN, we recommend that you set the negotiation mode to **aggressive**.
2225
+ *
2226
+ * @example
2227
+ * 47.XX.XX.1
2228
+ */
2145
2229
  localId?: string;
2230
+ /**
2231
+ * @remarks
2232
+ * The pre-shared key that is used for identity authentication between the tunnel and the tunnel peer.
2233
+ *
2234
+ * * The key cannot contain spaces. The key must be 1 to 100 characters in length, and can contain digits, letters, and the following special characters: ``~!\\`@#$%^&*()_-+={}[]|;:\\",.<>/?``
2235
+ * * If you do not specify a pre-shared key, the system randomly generates a 16-bit string as the pre-shared key. You can call the [DescribeVpnAttachments](https://help.aliyun.com/document_detail/2526939.html) operation to query the pre-shared key that is automatically generated by the system.
2236
+ *
2237
+ * > The tunnel and the tunnel peer must use the same pre-shared key. Otherwise, the tunnel cannot be established.
2238
+ *
2239
+ * @example
2240
+ * 123456****
2241
+ */
2146
2242
  psk?: string;
2243
+ /**
2244
+ * @remarks
2245
+ * The identifier of the tunnel peer, which is used in Phase 1 negotiations. The identifier cannot exceed 100 characters in length and cannot contain spaces. The default value is the IP address of the customer gateway that is associated with the tunnel.
2246
+ *
2247
+ * **RemoteId** supports FQDNs. If you use an FQDN, we recommend that you set the negotiation mode to **aggressive**.
2248
+ *
2249
+ * @example
2250
+ * 47.XX.XX.2
2251
+ */
2147
2252
  remoteId?: string;
2148
2253
  static names(): {
2149
2254
  [key: string]: string;
@@ -2157,9 +2262,43 @@ export declare class CreateVpnAttachmentRequestTunnelOptionsSpecificationTunnelI
2157
2262
  });
2158
2263
  }
2159
2264
  export declare class CreateVpnAttachmentRequestTunnelOptionsSpecificationTunnelIpsecConfig extends $dara.Model {
2265
+ /**
2266
+ * @remarks
2267
+ * The authentication algorithm that is used in Phase 2 negotiations.
2268
+ *
2269
+ * Valid values: **md5**, **sha1**, **sha256**, **sha384**, and **sha512**. Default value: **sha1**.
2270
+ *
2271
+ * @example
2272
+ * sha1
2273
+ */
2160
2274
  ipsecAuthAlg?: string;
2275
+ /**
2276
+ * @remarks
2277
+ * The encryption algorithm that is used in Phase 2 negotiations. Valid values: **aes**, **aes192**, **aes256**, **des**, and **3des**. Default value: **aes**.
2278
+ *
2279
+ * @example
2280
+ * aes
2281
+ */
2161
2282
  ipsecEncAlg?: string;
2283
+ /**
2284
+ * @remarks
2285
+ * The SA lifetime as a result of Phase 2 negotiations. Unit: seconds.
2286
+ *
2287
+ * Valid values: **0** to **86400**. Default value: **86400**.
2288
+ *
2289
+ * @example
2290
+ * 86400
2291
+ */
2162
2292
  ipsecLifetime?: number;
2293
+ /**
2294
+ * @remarks
2295
+ * The Diffie-Hellman key exchange algorithm that is used in Phase 2 negotiations. Default value: **group2**.
2296
+ *
2297
+ * Valid values: **disabled**, **group1**, **group2**, **group5**, and **group14**.
2298
+ *
2299
+ * @example
2300
+ * group2
2301
+ */
2163
2302
  ipsecPfs?: string;
2164
2303
  static names(): {
2165
2304
  [key: string]: string;
@@ -2173,12 +2312,65 @@ export declare class CreateVpnAttachmentRequestTunnelOptionsSpecificationTunnelI
2173
2312
  });
2174
2313
  }
2175
2314
  export declare class CreateVpnAttachmentRequestTunnelOptionsSpecification extends $dara.Model {
2315
+ /**
2316
+ * @remarks
2317
+ * The ID of the customer gateway that is associated with the tunnel.
2318
+ *
2319
+ * > This parameter is required when you create a dual-tunnel IPsec-VPN connection.
2320
+ *
2321
+ * @example
2322
+ * cgw-p0w2jemrcj5u61un8****
2323
+ */
2176
2324
  customerGatewayId?: string;
2325
+ /**
2326
+ * @remarks
2327
+ * Specifies whether to enable the DPD feature for the tunnel. Valid values:
2328
+ *
2329
+ * * **true** (default): enables DPD. The initiator of the IPsec-VPN connection sends DPD packets to check the existence and availability of the peer. If no feedback is received from the peer within the specified period of time, the connection fails. In this case, ISAKMP SA and IPsec SA are deleted along with the security tunnel.
2330
+ * * **false**: disables DPD. The initiator of the IPsec-VPN connection does not send DPD packets.
2331
+ *
2332
+ * @example
2333
+ * true
2334
+ */
2177
2335
  enableDpd?: boolean;
2336
+ /**
2337
+ * @remarks
2338
+ * Specifies whether to enable NAT traversal for the tunnel. Valid values:
2339
+ *
2340
+ * * **true** (default): enables NAT traversal. After NAT traversal is enabled, the initiator does not check the UDP ports during IKE negotiations and can automatically discover NAT gateway devices along the IPsec-VPN tunnel.
2341
+ * * **false**: disables NAT traversal.
2342
+ *
2343
+ * @example
2344
+ * true
2345
+ */
2178
2346
  enableNatTraversal?: boolean;
2347
+ /**
2348
+ * @remarks
2349
+ * The BGP configurations of the tunnel.
2350
+ *
2351
+ * > If you enable BGP for an IPsec-VPN connection, you must set **EnableTunnelsBgp** parameter to **true**.
2352
+ */
2179
2353
  tunnelBgpConfig?: CreateVpnAttachmentRequestTunnelOptionsSpecificationTunnelBgpConfig;
2354
+ /**
2355
+ * @remarks
2356
+ * The configurations of Phase 1 negotiations.
2357
+ */
2180
2358
  tunnelIkeConfig?: CreateVpnAttachmentRequestTunnelOptionsSpecificationTunnelIkeConfig;
2359
+ /**
2360
+ * @remarks
2361
+ * The order in which the tunnel was created.
2362
+ *
2363
+ * * **1**: Tunnel 1.
2364
+ * * **2**: Tunnel 2.
2365
+ *
2366
+ * @example
2367
+ * 1
2368
+ */
2181
2369
  tunnelIndex?: number;
2370
+ /**
2371
+ * @remarks
2372
+ * The configurations of Phase 2 negotiations.
2373
+ */
2182
2374
  tunnelIpsecConfig?: CreateVpnAttachmentRequestTunnelOptionsSpecificationTunnelIpsecConfig;
2183
2375
  static names(): {
2184
2376
  [key: string]: string;
@@ -2232,10 +2424,8 @@ export declare class CreateVpnConnectionRequestTunnelOptionsSpecificationTunnelB
2232
2424
  * @remarks
2233
2425
  * The autonomous system number (ASN) of the tunnel on the Alibaba Cloud side. Valid values: **1** to **4294967295**. Default value: **45104**.
2234
2426
  *
2235
- *
2236
- *
2237
2427
  * > - If you set **EnableTunnelsBgp** to **true**, you must set this parameter.
2238
- * > - Before you add BGP configurations, we recommend that you learn about how BGP dynamic routing works and the limits. For more information, see [VPN Gateway supports BGP dynamic routing](https://help.aliyun.com/document_detail/170235.html).
2428
+ * > - Before you add BGP configurations, we recommend that you learn about how BGP dynamic routing works and the limits. For more information, see [Configure BGP dynamic routing](https://help.aliyun.com/document_detail/2638220.html).
2239
2429
  * > - We recommend that you use a private ASN to establish BGP connections to Alibaba Cloud. For information about the range of private ASNs, see the relevant documentation.
2240
2430
  *
2241
2431
  * @example
@@ -2252,7 +2442,7 @@ export declare class CreateVpnConnectionRequestTunnelOptionsSpecificationTunnelB
2252
2442
  localBgpIp?: string;
2253
2443
  /**
2254
2444
  * @remarks
2255
- * The BGP CIDR block of the tunnel. The CIDR block must fall within the 169.254.0.0/16 range. The subnet mask of the CIDR block must be 30 bits in length.
2445
+ * The BGP CIDR block of the tunnel. The CIDR block must fall within 169.254.0.0/16 and the mask of the CIDR block must be 30 bits in length. The CIDR block cannot be 169.254.0.0/30, 169.254.1.0/30, 169.254.2.0/30, 169.254.3.0/30, 169.254.4.0/30, 169.254.5.0/30, 169.254.6.0/30, or 169.254.169.252/30.
2256
2446
  *
2257
2447
  * > The BGP CIDR block of each tunnel must be unique on a VPN gateway.
2258
2448
  *
@@ -2294,7 +2484,7 @@ export declare class CreateVpnConnectionRequestTunnelOptionsSpecificationTunnelI
2294
2484
  ikeEncAlg?: string;
2295
2485
  /**
2296
2486
  * @remarks
2297
- * The SA lifetime as a result of Phase 1 negotiations. Unit: seconds.
2487
+ * The SA lifetime as a result of Phase 1 negotiations. Unit: seconds
2298
2488
  *
2299
2489
  * Valid values: **0** to **86400**. Default value: **86400**.
2300
2490
  *
@@ -2307,7 +2497,7 @@ export declare class CreateVpnConnectionRequestTunnelOptionsSpecificationTunnelI
2307
2497
  * The negotiation mode of IKE. Valid values: **main** and **aggressive**. Default value: **main**.
2308
2498
  *
2309
2499
  * * **main:** This mode offers higher security during negotiations.
2310
- * * **aggressive**: This mode supports faster negotiations and a higher success rate.
2500
+ * * **aggressive:** This mode is faster and has a higher success rate.
2311
2501
  *
2312
2502
  * @example
2313
2503
  * main
@@ -2334,7 +2524,7 @@ export declare class CreateVpnConnectionRequestTunnelOptionsSpecificationTunnelI
2334
2524
  ikeVersion?: string;
2335
2525
  /**
2336
2526
  * @remarks
2337
- * The identifier of the tunnel on the Alibaba Cloud side, which is used in Phase 1 negotiations. It can contain at most 100 characters. The default value is the IP address of the tunnel.
2527
+ * The identifier of the tunnel on the Alibaba Cloud side, which is used in Phase 1 negotiations. The identifier cannot exceed 100 characters in length and cannot contain space characters. The default value is the IP address of the tunnel.
2338
2528
  *
2339
2529
  * **LocalId** supports fully qualified domain names (FQDNs). If you use an FQDN, we recommend that you set the negotiation mode to **aggressive**.
2340
2530
  *
@@ -2346,7 +2536,7 @@ export declare class CreateVpnConnectionRequestTunnelOptionsSpecificationTunnelI
2346
2536
  * @remarks
2347
2537
  * The pre-shared key that is used for identity authentication between the tunnel and the tunnel peer.
2348
2538
  *
2349
- * * The key must be 1 to 100 characters in length and can contain digits, letters, and the following special characters: ``~!\\`@#$%^&*()_-+={}[]|;:\\",.<>/?``
2539
+ * * The key cannot contain spaces. The key must be 1 to 100 characters in length, and can contain digits, letters, and the following special characters: ``~!\\`@#$%^&*()_-+={}[]|;:\\",.<>/?``
2350
2540
  * * If you do not specify a pre-shared key, the system randomly generates a 16-bit string as the pre-shared key. You can call the [DescribeVpnConnection](https://help.aliyun.com/document_detail/2526951.html) operation to query the pre-shared key that is automatically generated by the system.
2351
2541
  *
2352
2542
  * > The tunnel and the tunnel peer must use the same pre-shared key. Otherwise, the tunnel cannot be established.
@@ -2357,7 +2547,7 @@ export declare class CreateVpnConnectionRequestTunnelOptionsSpecificationTunnelI
2357
2547
  psk?: string;
2358
2548
  /**
2359
2549
  * @remarks
2360
- * The identifier of the tunnel peer, which is used in Phase 1 negotiations. It can contain at most 100 characters. The default value is the IP address of the customer gateway that is associated with the tunnel.
2550
+ * The identifier of the tunnel peer, which is used in Phase 1 negotiations. The identifier cannot exceed 100 characters in length and cannot contain space characters. The default value is the IP address of the customer gateway that is associated with the tunnel.
2361
2551
  *
2362
2552
  * **RemoteId** supports FQDNs. If you use an FQDN, we recommend that you set the negotiation mode to **aggressive**.
2363
2553
  *
@@ -2399,7 +2589,7 @@ export declare class CreateVpnConnectionRequestTunnelOptionsSpecificationTunnelI
2399
2589
  ipsecEncAlg?: string;
2400
2590
  /**
2401
2591
  * @remarks
2402
- * The SA lifetime as a result of Phase 2 negotiations. Unit: seconds.
2592
+ * The SA lifetime as a result of Phase 2 negotiations. Unit: seconds
2403
2593
  *
2404
2594
  * Valid values: **0** to **86400**. Default value: **86400**.
2405
2595
  *
@@ -2476,7 +2666,7 @@ export declare class CreateVpnConnectionRequestTunnelOptionsSpecification extend
2476
2666
  remoteCaCertificate?: string;
2477
2667
  /**
2478
2668
  * @remarks
2479
- * The role of the tunnel. Valid values: Valid values:
2669
+ * The role of the tunnel. Valid values:
2480
2670
  *
2481
2671
  * * **master**: The tunnel is an active tunnel.
2482
2672
  * * **slave**: The tunnel is a standby tunnel.
@@ -3738,7 +3928,7 @@ export declare class DescribeCommonBandwidthPackagesResponseBodyCommonBandwidthP
3738
3928
  export declare class DescribeCustomerGatewayResponseBodyTagsTag extends $dara.Model {
3739
3929
  /**
3740
3930
  * @remarks
3741
- * The key of tag N.
3931
+ * The tag key.
3742
3932
  *
3743
3933
  * @example
3744
3934
  * TagKey
@@ -3746,7 +3936,7 @@ export declare class DescribeCustomerGatewayResponseBodyTagsTag extends $dara.Mo
3746
3936
  key?: string;
3747
3937
  /**
3748
3938
  * @remarks
3749
- * The value of tag N.
3939
+ * The tag value.
3750
3940
  *
3751
3941
  * @example
3752
3942
  * TagValue
@@ -4554,10 +4744,19 @@ export declare class DescribeEipAddressesResponseBodyEipAddressesEipAddress exte
4554
4744
  segmentInstanceId?: string;
4555
4745
  /**
4556
4746
  * @remarks
4557
- * Indicates whether the resource is created by the service account. Valid values:
4747
+ * The ID of the service provider to which the managed instance belongs.
4748
+ * > This is only valid when the ServiceManaged parameter is set to True.
4749
+ *
4750
+ * @example
4751
+ * 197*************
4752
+ */
4753
+ serviceID?: number;
4754
+ /**
4755
+ * @remarks
4756
+ * Indicates whether the instance is managed. Valid values:
4558
4757
  *
4559
- * * **0**
4560
- * * **1**
4758
+ * * **1**: yes
4759
+ * * **0**: no
4561
4760
  *
4562
4761
  * @example
4563
4762
  * 0
@@ -10594,7 +10793,9 @@ export declare class DescribeRouteEntryListResponseBodyRouteEntrys extends $dara
10594
10793
  export declare class DescribeRouteTableListRequestTag extends $dara.Model {
10595
10794
  /**
10596
10795
  * @remarks
10597
- * The detailed information about the route tables.
10796
+ * The value of tag N to add to the resource. You can specify up to 20 tag values. The tag value can be an empty string.
10797
+ *
10798
+ * The tag value can be up to 128 characters in length. It cannot start with `aliyun` or `acs:` and cannot contain `http://` or `https://`.
10598
10799
  *
10599
10800
  * @example
10600
10801
  * FinanceDept
@@ -10602,7 +10803,9 @@ export declare class DescribeRouteTableListRequestTag extends $dara.Model {
10602
10803
  key?: string;
10603
10804
  /**
10604
10805
  * @remarks
10605
- * The ID of the VPC to which the route table belongs.
10806
+ * The value of tag N to add to the resource. You can specify up to 20 tag values. The tag value can be an empty string.
10807
+ *
10808
+ * The tag value can be up to 128 characters in length. It cannot start with `aliyun` or `acs:` and cannot contain `http://` or `https://`.
10606
10809
  *
10607
10810
  * @example
10608
10811
  * FinanceJoshua
@@ -10635,9 +10838,7 @@ export declare class DescribeRouteTableListResponseBodyRouterTableListRouterTabl
10635
10838
  export declare class DescribeRouteTableListResponseBodyRouterTableListRouterTableListTypeTagsTag extends $dara.Model {
10636
10839
  /**
10637
10840
  * @remarks
10638
- * The key of tag N to add to the resource. You can specify up to 20 tag keys. The tag key cannot be an empty string.
10639
- *
10640
- * The tag key can be up to 128 characters in length. It cannot start with aliyun or acs:, and cannot contain http:// or https://.
10841
+ * The key of the tag that is added to the route table.
10641
10842
  *
10642
10843
  * @example
10643
10844
  * type
@@ -10645,9 +10846,7 @@ export declare class DescribeRouteTableListResponseBodyRouterTableListRouterTabl
10645
10846
  key?: string;
10646
10847
  /**
10647
10848
  * @remarks
10648
- * The value of tag N to add to the resource. You can specify up to 20 tag values. The tag value can be an empty string.
10649
- *
10650
- * The tag value can be up to 128 characters in length. It cannot start with aliyun or acs: and cannot contain http:// or https://.
10849
+ * The value of the tag that is added to the route table.
10651
10850
  *
10652
10851
  * @example
10653
10852
  * ingress
@@ -10693,7 +10892,10 @@ export declare class DescribeRouteTableListResponseBodyRouterTableListRouterTabl
10693
10892
  export declare class DescribeRouteTableListResponseBodyRouterTableListRouterTableListType extends $dara.Model {
10694
10893
  /**
10695
10894
  * @remarks
10696
- * The tags.
10895
+ * The type of the cloud resource with which the route table is associated. Valid values:
10896
+ *
10897
+ * * **VSwitch**: vSwitch
10898
+ * * **Gateway**: IPv4 gateway
10697
10899
  *
10698
10900
  * @example
10699
10901
  * VSwitch
@@ -10701,10 +10903,7 @@ export declare class DescribeRouteTableListResponseBodyRouterTableListRouterTabl
10701
10903
  associateType?: string;
10702
10904
  /**
10703
10905
  * @remarks
10704
- * The type of the router to which the route table belongs. Valid values:
10705
- *
10706
- * * **VRouter**
10707
- * * **VBR**
10906
+ * The time when the route table was created.
10708
10907
  *
10709
10908
  * @example
10710
10909
  * 2021-08-22T10:40:25Z
@@ -10712,7 +10911,7 @@ export declare class DescribeRouteTableListResponseBodyRouterTableListRouterTabl
10712
10911
  creationTime?: string;
10713
10912
  /**
10714
10913
  * @remarks
10715
- * The information about the vSwitches.
10914
+ * The information about the route table.
10716
10915
  *
10717
10916
  * @example
10718
10917
  * This is Route Table.
@@ -10725,7 +10924,7 @@ export declare class DescribeRouteTableListResponseBodyRouterTableListRouterTabl
10725
10924
  gatewayIds?: DescribeRouteTableListResponseBodyRouterTableListRouterTableListTypeGatewayIds;
10726
10925
  /**
10727
10926
  * @remarks
10728
- * The value of tag N added to the resource.
10927
+ * The ID of the Alibaba Cloud account to which the route table belongs.
10729
10928
  *
10730
10929
  * @example
10731
10930
  * 253460731706911258
@@ -10733,7 +10932,7 @@ export declare class DescribeRouteTableListResponseBodyRouterTableListRouterTabl
10733
10932
  ownerId?: number;
10734
10933
  /**
10735
10934
  * @remarks
10736
- * The detailed information about the IPv4 gateway.
10935
+ * The ID of the resource group to which the route table belongs.
10737
10936
  *
10738
10937
  * @example
10739
10938
  * rg-acfmxazb4ph****
@@ -10743,9 +10942,9 @@ export declare class DescribeRouteTableListResponseBodyRouterTableListRouterTabl
10743
10942
  * @remarks
10744
10943
  * Whether to receive the propagation routes. Valid Values:
10745
10944
  *
10746
- * * **True**: The propagation route is received.
10945
+ * * **true**: received.
10747
10946
  *
10748
- * * **False**: The propagation route is not received.
10947
+ * * **false**: not received.
10749
10948
  *
10750
10949
  * @example
10751
10950
  * true
@@ -10753,7 +10952,7 @@ export declare class DescribeRouteTableListResponseBodyRouterTableListRouterTabl
10753
10952
  routePropagationEnable?: boolean;
10754
10953
  /**
10755
10954
  * @remarks
10756
- * The key of tag N added to the resource.
10955
+ * The ID of the route table.
10757
10956
  *
10758
10957
  * @example
10759
10958
  * vtb-bp145q7glnuzdvzu2****
@@ -10769,7 +10968,10 @@ export declare class DescribeRouteTableListResponseBodyRouterTableListRouterTabl
10769
10968
  routeTableName?: string;
10770
10969
  /**
10771
10970
  * @remarks
10772
- * The ID of the vSwitch.
10971
+ * The type of the route table. Valid values:
10972
+ *
10973
+ * * **Custom**
10974
+ * * **System**
10773
10975
  *
10774
10976
  * @example
10775
10977
  * System
@@ -10777,7 +10979,7 @@ export declare class DescribeRouteTableListResponseBodyRouterTableListRouterTabl
10777
10979
  routeTableType?: string;
10778
10980
  /**
10779
10981
  * @remarks
10780
- * The tag added to the route table.
10982
+ * The ID of the vRouter to which the route table belongs.
10781
10983
  *
10782
10984
  * @example
10783
10985
  * vrt-bp1lhl0taikrteen8****
@@ -10785,7 +10987,11 @@ export declare class DescribeRouteTableListResponseBodyRouterTableListRouterTabl
10785
10987
  routerId?: string;
10786
10988
  /**
10787
10989
  * @remarks
10788
- * The detailed information about the IPv4 gateway.
10990
+ * The type of the vRouter to which the route table belongs. Valid values:
10991
+ *
10992
+ * - **VRouter**: a vRouter.
10993
+ *
10994
+ * - **VBR**: a VBR.
10789
10995
  *
10790
10996
  * @example
10791
10997
  * VRouter
@@ -10793,7 +10999,11 @@ export declare class DescribeRouteTableListResponseBodyRouterTableListRouterTabl
10793
10999
  routerType?: string;
10794
11000
  /**
10795
11001
  * @remarks
10796
- * The name of the route table.
11002
+ * The status of the route table. Valid values:
11003
+ *
11004
+ * * **Pending**
11005
+ * * **Available**
11006
+ * * **Deleting**
10797
11007
  *
10798
11008
  * @example
10799
11009
  * Available
@@ -10811,7 +11021,7 @@ export declare class DescribeRouteTableListResponseBodyRouterTableListRouterTabl
10811
11021
  vSwitchIds?: DescribeRouteTableListResponseBodyRouterTableListRouterTableListTypeVSwitchIds;
10812
11022
  /**
10813
11023
  * @remarks
10814
- * The ID of the resource group to which the route table belongs.
11024
+ * The ID of the VPC to which the route table belongs.
10815
11025
  *
10816
11026
  * @example
10817
11027
  * vpc-bp15zckdt37pq72****
@@ -11833,9 +12043,9 @@ export declare class DescribeSnatTableEntriesResponseBodySnatTableEntries extend
11833
12043
  export declare class DescribeSslVpnClientCertsResponseBodySslVpnClientCertKeysSslVpnClientCertKey extends $dara.Model {
11834
12044
  /**
11835
12045
  * @remarks
11836
- * The timestamp that indicates when the SSL client certificate was created. Unit: millisecond.
12046
+ * The timestamp generated when the SSL client certificate was created. Unit: milliseconds.
11837
12047
  *
11838
- * This value is a UNIX timestamp representing the number of milliseconds that have elapsed since the epoch time January 1, 1970, 00:00:00 UTC.
12048
+ * This value is a UNIX timestamp representing the number of milliseconds that have elapsed since January 1, 1970, 00:00:00 UTC.
11839
12049
  *
11840
12050
  * @example
11841
12051
  * 1492747187000
@@ -11843,9 +12053,9 @@ export declare class DescribeSslVpnClientCertsResponseBodySslVpnClientCertKeysSs
11843
12053
  createTime?: number;
11844
12054
  /**
11845
12055
  * @remarks
11846
- * The timestamp that indicates when the SSL client certificate expires. Unit: millisecond.
12056
+ * The timestamp generated when the SSL client certificate expires. Unit: milliseconds.
11847
12057
  *
11848
- * This value is a UNIX timestamp representing the number of milliseconds that have elapsed since the epoch time January 1, 1970, 00:00:00 UTC.
12058
+ * This value is a UNIX timestamp representing the number of milliseconds that have elapsed since January 1, 1970, 00:00:00 UTC.
11849
12059
  *
11850
12060
  * @example
11851
12061
  * 1494966335000
@@ -11861,7 +12071,7 @@ export declare class DescribeSslVpnClientCertsResponseBodySslVpnClientCertKeysSs
11861
12071
  name?: string;
11862
12072
  /**
11863
12073
  * @remarks
11864
- * The region where the SSL client certificate is created.
12074
+ * The region ID of the SSL client certificate.
11865
12075
  *
11866
12076
  * @example
11867
12077
  * cn-hangzhou
@@ -11871,7 +12081,7 @@ export declare class DescribeSslVpnClientCertsResponseBodySslVpnClientCertKeysSs
11871
12081
  * @remarks
11872
12082
  * The ID of the resource group to which the SSL client certificate belongs.
11873
12083
  *
11874
- * You can call the [ListResourceGroups](https://help.aliyun.com/document_detail/158855.html) operation to query the resource group information.
12084
+ * You can call the [ListResourceGroups](https://help.aliyun.com/document_detail/158855.html) operation to query resource groups.
11875
12085
  *
11876
12086
  * @example
11877
12087
  * rg-acfmzs372yg****
@@ -11897,7 +12107,7 @@ export declare class DescribeSslVpnClientCertsResponseBodySslVpnClientCertKeysSs
11897
12107
  * @remarks
11898
12108
  * The status of the SSL client certificate. Valid values:
11899
12109
  *
11900
- * * **expiring-soon**
12110
+ * * **expiring-soon**: The certificate expires in one week.
11901
12111
  * * **normal**
11902
12112
  * * **expired**
11903
12113
  *
@@ -12067,26 +12277,35 @@ export declare class DescribeSslVpnServersResponseBodySslVpnServersSslVpnServer
12067
12277
  */
12068
12278
  enableMultiFactorAuth?: boolean;
12069
12279
  /**
12280
+ * @remarks
12281
+ * The ID of the IDaaS application.
12282
+ *
12070
12283
  * @example
12071
12284
  * app_my6g4qmvnwxzj2f****
12072
12285
  */
12073
12286
  IDaaSApplicationId?: string;
12074
12287
  /**
12075
12288
  * @remarks
12076
- * The ID of the IDaaS instance.
12289
+ * The ID of the IDaaS EIAM instance.
12077
12290
  *
12078
12291
  * @example
12079
12292
  * idaas-cn-hangzhou-****
12080
12293
  */
12081
12294
  IDaaSInstanceId?: string;
12082
12295
  /**
12296
+ * @remarks
12297
+ * The version of the IDaaS EIAM instance.
12298
+ *
12299
+ * * This parameter is returned only if the SSL server is associated with an IDaaS EIAM 2.0 instance. Only **EIAM 2.0** is returned.
12300
+ * * If the SSL server is associated with an IDaaS EIAM 1.0 instance, no value is returned.
12301
+ *
12083
12302
  * @example
12084
12303
  * EIAM 2.0
12085
12304
  */
12086
12305
  IDaaSInstanceVersion?: string;
12087
12306
  /**
12088
12307
  * @remarks
12089
- * The region ID of the IDaaS instance.
12308
+ * The region ID of the IDaaS EIAM instance.
12090
12309
  *
12091
12310
  * @example
12092
12311
  * cn-hangzhou
@@ -12118,7 +12337,7 @@ export declare class DescribeSslVpnServersResponseBodySslVpnServersSslVpnServer
12118
12337
  maxConnections?: number;
12119
12338
  /**
12120
12339
  * @remarks
12121
- * The name of the SSL-VPN server.
12340
+ * The name of the SSL server.
12122
12341
  *
12123
12342
  * @example
12124
12343
  * test
@@ -12134,7 +12353,7 @@ export declare class DescribeSslVpnServersResponseBodySslVpnServersSslVpnServer
12134
12353
  port?: number;
12135
12354
  /**
12136
12355
  * @remarks
12137
- * The protocol that is used by the SSL-VPN server.
12356
+ * The protocol that is used by the SSL server.
12138
12357
  *
12139
12358
  * @example
12140
12359
  * UDP
@@ -12142,7 +12361,7 @@ export declare class DescribeSslVpnServersResponseBodySslVpnServersSslVpnServer
12142
12361
  proto?: string;
12143
12362
  /**
12144
12363
  * @remarks
12145
- * The region ID of the SSL-VPN server.
12364
+ * The region ID of the SSL server.
12146
12365
  *
12147
12366
  * @example
12148
12367
  * cn-hangzhou
@@ -12150,7 +12369,7 @@ export declare class DescribeSslVpnServersResponseBodySslVpnServersSslVpnServer
12150
12369
  regionId?: string;
12151
12370
  /**
12152
12371
  * @remarks
12153
- * The resource group ID of the SSL-VPN server.
12372
+ * The resource group ID of the SSL server.
12154
12373
  *
12155
12374
  * You can call the [ListResourceGroups](https://help.aliyun.com/document_detail/158855.html) operation to query resource groups.
12156
12375
  *
@@ -12160,7 +12379,7 @@ export declare class DescribeSslVpnServersResponseBodySslVpnServersSslVpnServer
12160
12379
  resourceGroupId?: string;
12161
12380
  /**
12162
12381
  * @remarks
12163
- * The ID of the SSL-VPN server.
12382
+ * The ID of the SSL server.
12164
12383
  *
12165
12384
  * @example
12166
12385
  * vss-bp15j3du13gq1dgey****
@@ -12834,6 +13053,13 @@ export declare class DescribeVcoRouteEntriesResponseBodyVcoRouteEntries extends
12834
13053
  * vco-p0w2jpkhi2eeop6q6****
12835
13054
  */
12836
13055
  nextHop?: string;
13056
+ /**
13057
+ * @remarks
13058
+ * The list of next hops.
13059
+ *
13060
+ * > - This parameter is returned only by dual-tunnel IPsec connections.
13061
+ * > - This parameter is returned only when the tunnel status is **Phase 2 Negotiation Successful**.
13062
+ */
12837
13063
  nextHopTunnelIdList?: string[];
12838
13064
  /**
12839
13065
  * @remarks
@@ -12886,10 +13112,9 @@ export declare class DescribeVcoRouteEntriesResponseBodyVcoRouteEntries extends
12886
13112
  vpnConnectionId?: string;
12887
13113
  /**
12888
13114
  * @remarks
12889
- * The weight of the destination-based route. Valid values:
13115
+ * The weight of the destination-based route.
12890
13116
  *
12891
- * * **0**: a low priority
12892
- * * **100**: a high priority
13117
+ * > The current parameter has no effect.
12893
13118
  *
12894
13119
  * @example
12895
13120
  * 100
@@ -12907,8 +13132,35 @@ export declare class DescribeVcoRouteEntriesResponseBodyVcoRouteEntries extends
12907
13132
  });
12908
13133
  }
12909
13134
  export declare class DescribeVcoRouteEntriesResponseBodyVpnRouteCounts extends $dara.Model {
13135
+ /**
13136
+ * @remarks
13137
+ * The number of route entries.
13138
+ *
13139
+ * @example
13140
+ * 3
13141
+ */
12910
13142
  routeCount?: number;
13143
+ /**
13144
+ * @remarks
13145
+ * The route type. Valid values:
13146
+ *
13147
+ * * **custom**: destination-based route.
13148
+ * * **bgp**: BGP route.
13149
+ *
13150
+ * @example
13151
+ * bgp
13152
+ */
12911
13153
  routeEntryType?: string;
13154
+ /**
13155
+ * @remarks
13156
+ * The source of the BGP route. Valid values:
13157
+ *
13158
+ * * **CLOUD**: The current BGP route is learned by the IPsec connection from the transit router.
13159
+ * * **VPN_BGP**: The current BGP route is learned by the IPsec connection from the data center.
13160
+ *
13161
+ * @example
13162
+ * VPN_BGP
13163
+ */
12912
13164
  source?: string;
12913
13165
  static names(): {
12914
13166
  [key: string]: string;
@@ -14618,7 +14870,21 @@ export declare class DescribeVpcsResponseBodyVpcs extends $dara.Model {
14618
14870
  });
14619
14871
  }
14620
14872
  export declare class DescribeVpnAttachmentsResponseBodyVpnAttachmentsTags extends $dara.Model {
14873
+ /**
14874
+ * @remarks
14875
+ * The tag key of the IPsec-VPN connection.
14876
+ *
14877
+ * @example
14878
+ * TagKey
14879
+ */
14621
14880
  key?: string;
14881
+ /**
14882
+ * @remarks
14883
+ * The tag value of the IPsec-VPN connection.
14884
+ *
14885
+ * @example
14886
+ * TagValue
14887
+ */
14622
14888
  value?: string;
14623
14889
  static names(): {
14624
14890
  [key: string]: string;
@@ -14675,264 +14941,42 @@ export declare class DescribeVpnAttachmentsResponseBodyVpnAttachments extends $d
14675
14941
  * nametest1
14676
14942
  */
14677
14943
  name?: string;
14678
- tag?: string;
14679
- tags?: DescribeVpnAttachmentsResponseBodyVpnAttachmentsTags[];
14680
14944
  /**
14681
14945
  * @remarks
14682
- * The ID of the transit router with which the IPsec-VPN connection is associated.
14946
+ * The system tags of the IPsec-VPN connection.
14683
14947
  *
14684
- * @example
14685
- * tr-p0wkh4yryb1dnanqw****
14686
- */
14687
- transitRouterId?: string;
14688
- /**
14689
- * @remarks
14690
- * The name of the transit router.
14948
+ * You can check whether an IPsec-VPN connection supports BGP based on the system tags.
14691
14949
  *
14692
- * @example
14693
- * nametest2
14694
- */
14695
- transitRouterName?: string;
14696
- static names(): {
14697
- [key: string]: string;
14698
- };
14699
- static types(): {
14700
- [key: string]: any;
14701
- };
14702
- validate(): void;
14703
- constructor(map?: {
14704
- [key: string]: any;
14705
- });
14706
- }
14707
- export declare class DescribeVpnConnectionResponseBodyIkeConfig extends $dara.Model {
14708
- /**
14709
- * @remarks
14710
- * The authentication algorithm in the IKE phase.
14950
+ * **BGPSupport**: indicates whether the IPsec-VPN connection supports BGP.
14711
14951
  *
14712
- * @example
14713
- * sha1
14714
- */
14715
- ikeAuthAlg?: string;
14716
- /**
14717
- * @remarks
14718
- * The encryption algorithm in the IKE phase.
14719
- *
14720
- * @example
14721
- * aes
14722
- */
14723
- ikeEncAlg?: string;
14724
- /**
14725
- * @remarks
14726
- * The lifetime in the IKE phase. Unit: seconds.
14727
- *
14728
- * @example
14729
- * 86400
14730
- */
14731
- ikeLifetime?: number;
14732
- /**
14733
- * @remarks
14734
- * The IKE negotiation mode.
14735
- *
14736
- * * **main**: This mode offers higher security during negotiations.
14737
- * * **aggressive**: This mode is faster and has a higher success rate.
14738
- *
14739
- * @example
14740
- * main
14741
- */
14742
- ikeMode?: string;
14743
- /**
14744
- * @remarks
14745
- * The Diffie-Hellman (DH) group in the IKE phase.
14746
- *
14747
- * @example
14748
- * group2
14749
- */
14750
- ikePfs?: string;
14751
- /**
14752
- * @remarks
14753
- * The version of the IKE protocol.
14754
- *
14755
- * * **ikev1**
14756
- * * **ikev2**
14757
- *
14758
- * Compared with IKEv1, IKEv2 simplifies the SA negotiation process and is more suitable for scenarios in which multiple CIDR blocks are used.
14759
- *
14760
- * @example
14761
- * ikev1
14762
- */
14763
- ikeVersion?: string;
14764
- /**
14765
- * @remarks
14766
- * The identifier of the IPsec-VPN connection on the Alibaba Cloud side.
14767
- *
14768
- * @example
14769
- * 116.28.XX.XX
14770
- */
14771
- localId?: string;
14772
- /**
14773
- * @remarks
14774
- * The pre-shared key.
14775
- *
14776
- * @example
14777
- * pgw6dy****
14778
- */
14779
- psk?: string;
14780
- /**
14781
- * @remarks
14782
- * The identifier of the IPsec-VPN connection on the data center side.
14783
- *
14784
- * @example
14785
- * 139.34.XX.XX
14786
- */
14787
- remoteId?: string;
14788
- static names(): {
14789
- [key: string]: string;
14790
- };
14791
- static types(): {
14792
- [key: string]: any;
14793
- };
14794
- validate(): void;
14795
- constructor(map?: {
14796
- [key: string]: any;
14797
- });
14798
- }
14799
- export declare class DescribeVpnConnectionResponseBodyIpsecConfig extends $dara.Model {
14800
- /**
14801
- * @remarks
14802
- * The authentication algorithm in the IPsec phase.
14803
- *
14804
- * @example
14805
- * sha1
14806
- */
14807
- ipsecAuthAlg?: string;
14808
- /**
14809
- * @remarks
14810
- * The encryption algorithm in the IPsec phase.
14811
- *
14812
- * @example
14813
- * aes
14814
- */
14815
- ipsecEncAlg?: string;
14816
- /**
14817
- * @remarks
14818
- * The lifetime in the IPsec phase. Unit: seconds.
14819
- *
14820
- * @example
14821
- * 86400
14822
- */
14823
- ipsecLifetime?: number;
14824
- /**
14825
- * @remarks
14826
- * The DH group in the IPsec phase.
14827
- *
14828
- * @example
14829
- * group2
14830
- */
14831
- ipsecPfs?: string;
14832
- static names(): {
14833
- [key: string]: string;
14834
- };
14835
- static types(): {
14836
- [key: string]: any;
14837
- };
14838
- validate(): void;
14839
- constructor(map?: {
14840
- [key: string]: any;
14841
- });
14842
- }
14843
- export declare class DescribeVpnConnectionResponseBodyTagsTag extends $dara.Model {
14844
- /**
14845
- * @remarks
14846
- * The tag key.
14847
- *
14848
- * @example
14849
- * TagKey
14850
- */
14851
- key?: string;
14852
- /**
14853
- * @remarks
14854
- * The tag value.
14855
- *
14856
- * @example
14857
- * TagValue
14858
- */
14859
- value?: string;
14860
- static names(): {
14861
- [key: string]: string;
14862
- };
14863
- static types(): {
14864
- [key: string]: any;
14865
- };
14866
- validate(): void;
14867
- constructor(map?: {
14868
- [key: string]: any;
14869
- });
14870
- }
14871
- export declare class DescribeVpnConnectionResponseBodyTags extends $dara.Model {
14872
- tag?: DescribeVpnConnectionResponseBodyTagsTag[];
14873
- static names(): {
14874
- [key: string]: string;
14875
- };
14876
- static types(): {
14877
- [key: string]: any;
14878
- };
14879
- validate(): void;
14880
- constructor(map?: {
14881
- [key: string]: any;
14882
- });
14883
- }
14884
- export declare class DescribeVpnConnectionResponseBodyTunnelOptionsSpecificationTunnelOptionsTunnelBgpConfig extends $dara.Model {
14885
- /**
14886
- * @remarks
14887
- * The negotiation state of BGP. Valid values:
14888
- *
14889
- * * **success**
14952
+ * * **true**
14890
14953
  * * **false**
14891
14954
  *
14892
14955
  * @example
14893
- * success
14956
+ * {\\"description\\":\\"forwarding 1.7.22\\",\\"VisuallySsl\\":\\"true\\",\\"PbrPriority\\":\\"true\\",\\"BGPSupport\\":\\"true\\",\\"IDaaSNewVersion\\":\\"true\\"}
14894
14957
  */
14895
- bgpStatus?: string;
14896
- /**
14897
- * @remarks
14898
- * The ASN on the Alibaba Cloud side.
14899
- *
14900
- * @example
14901
- * 65530
14902
- */
14903
- localAsn?: string;
14904
- /**
14905
- * @remarks
14906
- * The BGP address on the Alibaba Cloud side.
14907
- *
14908
- * @example
14909
- * 169.254.10.1
14910
- */
14911
- localBgpIp?: string;
14958
+ tag?: string;
14912
14959
  /**
14913
14960
  * @remarks
14914
- * The ASN of the tunnel peer.
14915
- *
14916
- * @example
14917
- * 65531
14961
+ * The list of tags to be added to the IPsec-VPN connection.
14918
14962
  */
14919
- peerAsn?: string;
14963
+ tags?: DescribeVpnAttachmentsResponseBodyVpnAttachmentsTags[];
14920
14964
  /**
14921
14965
  * @remarks
14922
- * The BGP IP address of the tunnel peer.
14966
+ * The ID of the transit router with which the IPsec-VPN connection is associated.
14923
14967
  *
14924
14968
  * @example
14925
- * 169.254.10.2
14969
+ * tr-p0wkh4yryb1dnanqw****
14926
14970
  */
14927
- peerBgpIp?: string;
14971
+ transitRouterId?: string;
14928
14972
  /**
14929
14973
  * @remarks
14930
- * The BGP CIDR block of the tunnel.
14974
+ * The name of the transit router.
14931
14975
  *
14932
14976
  * @example
14933
- * 169.254.10.0/30
14977
+ * nametest2
14934
14978
  */
14935
- tunnelCidr?: string;
14979
+ transitRouterName?: string;
14936
14980
  static names(): {
14937
14981
  [key: string]: string;
14938
14982
  };
@@ -14944,7 +14988,247 @@ export declare class DescribeVpnConnectionResponseBodyTunnelOptionsSpecification
14944
14988
  [key: string]: any;
14945
14989
  });
14946
14990
  }
14947
- export declare class DescribeVpnConnectionResponseBodyTunnelOptionsSpecificationTunnelOptionsTunnelIkeConfig extends $dara.Model {
14991
+ export declare class DescribeVpnConnectionResponseBodyIkeConfig extends $dara.Model {
14992
+ /**
14993
+ * @remarks
14994
+ * The authentication algorithm in the IKE phase.
14995
+ *
14996
+ * @example
14997
+ * sha1
14998
+ */
14999
+ ikeAuthAlg?: string;
15000
+ /**
15001
+ * @remarks
15002
+ * The encryption algorithm in the IKE phase.
15003
+ *
15004
+ * @example
15005
+ * aes
15006
+ */
15007
+ ikeEncAlg?: string;
15008
+ /**
15009
+ * @remarks
15010
+ * The lifetime in the IKE phase. Unit: seconds.
15011
+ *
15012
+ * @example
15013
+ * 86400
15014
+ */
15015
+ ikeLifetime?: number;
15016
+ /**
15017
+ * @remarks
15018
+ * The IKE negotiation mode.
15019
+ *
15020
+ * * **main**: This mode offers higher security during negotiations.
15021
+ * * **aggressive**: This mode is faster and has a higher success rate.
15022
+ *
15023
+ * @example
15024
+ * main
15025
+ */
15026
+ ikeMode?: string;
15027
+ /**
15028
+ * @remarks
15029
+ * The Diffie-Hellman (DH) group in the IKE phase.
15030
+ *
15031
+ * @example
15032
+ * group2
15033
+ */
15034
+ ikePfs?: string;
15035
+ /**
15036
+ * @remarks
15037
+ * The version of the IKE protocol.
15038
+ *
15039
+ * * **ikev1**
15040
+ * * **ikev2**
15041
+ *
15042
+ * Compared with IKEv1, IKEv2 simplifies the SA negotiation process and is more suitable for scenarios in which multiple CIDR blocks are used.
15043
+ *
15044
+ * @example
15045
+ * ikev1
15046
+ */
15047
+ ikeVersion?: string;
15048
+ /**
15049
+ * @remarks
15050
+ * The identifier of the IPsec-VPN connection on the Alibaba Cloud side.
15051
+ *
15052
+ * @example
15053
+ * 116.28.XX.XX
15054
+ */
15055
+ localId?: string;
15056
+ /**
15057
+ * @remarks
15058
+ * The pre-shared key.
15059
+ *
15060
+ * @example
15061
+ * pgw6dy****
15062
+ */
15063
+ psk?: string;
15064
+ /**
15065
+ * @remarks
15066
+ * The identifier of the IPsec-VPN connection on the data center side.
15067
+ *
15068
+ * @example
15069
+ * 139.34.XX.XX
15070
+ */
15071
+ remoteId?: string;
15072
+ static names(): {
15073
+ [key: string]: string;
15074
+ };
15075
+ static types(): {
15076
+ [key: string]: any;
15077
+ };
15078
+ validate(): void;
15079
+ constructor(map?: {
15080
+ [key: string]: any;
15081
+ });
15082
+ }
15083
+ export declare class DescribeVpnConnectionResponseBodyIpsecConfig extends $dara.Model {
15084
+ /**
15085
+ * @remarks
15086
+ * The authentication algorithm in the IPsec phase.
15087
+ *
15088
+ * @example
15089
+ * sha1
15090
+ */
15091
+ ipsecAuthAlg?: string;
15092
+ /**
15093
+ * @remarks
15094
+ * The encryption algorithm in the IPsec phase.
15095
+ *
15096
+ * @example
15097
+ * aes
15098
+ */
15099
+ ipsecEncAlg?: string;
15100
+ /**
15101
+ * @remarks
15102
+ * The lifetime in the IPsec phase. Unit: seconds.
15103
+ *
15104
+ * @example
15105
+ * 86400
15106
+ */
15107
+ ipsecLifetime?: number;
15108
+ /**
15109
+ * @remarks
15110
+ * The DH group in the IPsec phase.
15111
+ *
15112
+ * @example
15113
+ * group2
15114
+ */
15115
+ ipsecPfs?: string;
15116
+ static names(): {
15117
+ [key: string]: string;
15118
+ };
15119
+ static types(): {
15120
+ [key: string]: any;
15121
+ };
15122
+ validate(): void;
15123
+ constructor(map?: {
15124
+ [key: string]: any;
15125
+ });
15126
+ }
15127
+ export declare class DescribeVpnConnectionResponseBodyTagsTag extends $dara.Model {
15128
+ /**
15129
+ * @remarks
15130
+ * The tag key.
15131
+ *
15132
+ * @example
15133
+ * TagKey
15134
+ */
15135
+ key?: string;
15136
+ /**
15137
+ * @remarks
15138
+ * The tag value.
15139
+ *
15140
+ * @example
15141
+ * TagValue
15142
+ */
15143
+ value?: string;
15144
+ static names(): {
15145
+ [key: string]: string;
15146
+ };
15147
+ static types(): {
15148
+ [key: string]: any;
15149
+ };
15150
+ validate(): void;
15151
+ constructor(map?: {
15152
+ [key: string]: any;
15153
+ });
15154
+ }
15155
+ export declare class DescribeVpnConnectionResponseBodyTags extends $dara.Model {
15156
+ tag?: DescribeVpnConnectionResponseBodyTagsTag[];
15157
+ static names(): {
15158
+ [key: string]: string;
15159
+ };
15160
+ static types(): {
15161
+ [key: string]: any;
15162
+ };
15163
+ validate(): void;
15164
+ constructor(map?: {
15165
+ [key: string]: any;
15166
+ });
15167
+ }
15168
+ export declare class DescribeVpnConnectionResponseBodyTunnelOptionsSpecificationTunnelOptionsTunnelBgpConfig extends $dara.Model {
15169
+ /**
15170
+ * @remarks
15171
+ * The negotiation state of BGP. Valid values:
15172
+ *
15173
+ * * **success**
15174
+ * * **false**
15175
+ *
15176
+ * @example
15177
+ * success
15178
+ */
15179
+ bgpStatus?: string;
15180
+ /**
15181
+ * @remarks
15182
+ * The ASN on the Alibaba Cloud side.
15183
+ *
15184
+ * @example
15185
+ * 65530
15186
+ */
15187
+ localAsn?: string;
15188
+ /**
15189
+ * @remarks
15190
+ * The BGP address on the Alibaba Cloud side.
15191
+ *
15192
+ * @example
15193
+ * 169.254.10.1
15194
+ */
15195
+ localBgpIp?: string;
15196
+ /**
15197
+ * @remarks
15198
+ * The ASN of the tunnel peer.
15199
+ *
15200
+ * @example
15201
+ * 65531
15202
+ */
15203
+ peerAsn?: string;
15204
+ /**
15205
+ * @remarks
15206
+ * The BGP IP address of the tunnel peer.
15207
+ *
15208
+ * @example
15209
+ * 169.254.10.2
15210
+ */
15211
+ peerBgpIp?: string;
15212
+ /**
15213
+ * @remarks
15214
+ * The BGP CIDR block of the tunnel.
15215
+ *
15216
+ * @example
15217
+ * 169.254.10.0/30
15218
+ */
15219
+ tunnelCidr?: string;
15220
+ static names(): {
15221
+ [key: string]: string;
15222
+ };
15223
+ static types(): {
15224
+ [key: string]: any;
15225
+ };
15226
+ validate(): void;
15227
+ constructor(map?: {
15228
+ [key: string]: any;
15229
+ });
15230
+ }
15231
+ export declare class DescribeVpnConnectionResponseBodyTunnelOptionsSpecificationTunnelOptionsTunnelIkeConfig extends $dara.Model {
14948
15232
  /**
14949
15233
  * @remarks
14950
15234
  * The authentication algorithm in the IKE phase.
@@ -15178,6 +15462,18 @@ export declare class DescribeVpnConnectionResponseBodyTunnelOptionsSpecification
15178
15462
  * The configuration of Phase 1 negotiations.
15179
15463
  */
15180
15464
  tunnelIkeConfig?: DescribeVpnConnectionResponseBodyTunnelOptionsSpecificationTunnelOptionsTunnelIkeConfig;
15465
+ /**
15466
+ * @remarks
15467
+ * The order in which the tunnel is created.
15468
+ *
15469
+ * * **1**: Tunnel 1.
15470
+ * * **2**: Tunnel 2.
15471
+ *
15472
+ * > This parameter is returned only if the IPsec-VPN connection is associated with a transit router.
15473
+ *
15474
+ * @example
15475
+ * 1
15476
+ */
15181
15477
  tunnelIndex?: number;
15182
15478
  /**
15183
15479
  * @remarks
@@ -15900,6 +16196,18 @@ export declare class DescribeVpnConnectionsResponseBodyVpnConnectionsVpnConnecti
15900
16196
  * The configuration of Phase 1 negotiations.
15901
16197
  */
15902
16198
  tunnelIkeConfig?: DescribeVpnConnectionsResponseBodyVpnConnectionsVpnConnectionTunnelOptionsSpecificationTunnelOptionsTunnelIkeConfig;
16199
+ /**
16200
+ * @remarks
16201
+ * The order in which the tunnel is created.
16202
+ *
16203
+ * * **1**: Tunnel 1.
16204
+ * * **2**: Tunnel 2.
16205
+ *
16206
+ * > This parameter is returned only if the IPsec-VPN connection is associated with a transit router.
16207
+ *
16208
+ * @example
16209
+ * 1
16210
+ */
15903
16211
  tunnelIndex?: number;
15904
16212
  /**
15905
16213
  * @remarks
@@ -16326,9 +16634,9 @@ export declare class DescribeVpnConnectionsResponseBodyVpnConnectionsVpnConnecti
16326
16634
  transitRouterName?: string;
16327
16635
  /**
16328
16636
  * @remarks
16329
- * The tunnel configuration of the IPsec-VPN connection.
16637
+ * The tunnel configurations of the IPsec-VPN connection.
16330
16638
  *
16331
- * Parameters in **TunnelOptionsSpecification** are returned only if you query IPsec-VPN connections in dual-tunnel mode.
16639
+ * Parameters in **TunnelOptionsSpecification** are returned only if you query an IPsec-VPN connection in dual-tunnel mode.
16332
16640
  */
16333
16641
  tunnelOptionsSpecification?: DescribeVpnConnectionsResponseBodyVpnConnectionsVpnConnectionTunnelOptionsSpecification;
16334
16642
  /**
@@ -16400,9 +16708,9 @@ export declare class DescribeVpnCrossAccountAuthorizationsResponseBodyCrossAccou
16400
16708
  bindInstance?: string;
16401
16709
  /**
16402
16710
  * @remarks
16403
- * The resource type of the authorization.
16711
+ * The type of resource that can be associated with the IPsec-VPN connection.
16404
16712
  *
16405
- * The value is set to **CEN**, which indicates that the IPsec-VPN connection can be associated with a transit router of a Cloud Enterprise Network (CEN) instance that belongs to another Alibaba Cloud account.
16713
+ * Only **CEN** can be returned, which indicates that the IPsec-VPN connection is authorized to be associated with the transit router of a Cloud Enterprise Network (CEN) instance that belongs to another Alibaba Cloud account.
16406
16714
  *
16407
16715
  * @example
16408
16716
  * CEN
@@ -16410,7 +16718,7 @@ export declare class DescribeVpnCrossAccountAuthorizationsResponseBodyCrossAccou
16410
16718
  bindProduct?: string;
16411
16719
  /**
16412
16720
  * @remarks
16413
- * The ID of the Alibaba Cloud account whose resource the IPsec-VPN connection can be associated with.
16721
+ * The ID of the Alibaba Cloud account whose resources the IPsec-VPN connection is authorized to be associated with.
16414
16722
  *
16415
16723
  * @example
16416
16724
  * 1210123456123456
@@ -16418,7 +16726,7 @@ export declare class DescribeVpnCrossAccountAuthorizationsResponseBodyCrossAccou
16418
16726
  bindUid?: number;
16419
16727
  /**
16420
16728
  * @remarks
16421
- * The timestamp when the authorization for the IPsec-VPN connection was created.
16729
+ * The time when the authorization for the IPsec-VPN connection was created.
16422
16730
  *
16423
16731
  * This value is a UNIX timestamp representing the number of milliseconds that have elapsed since the epoch time January 1, 1970, 00:00:00 UTC.
16424
16732
  *
@@ -16584,11 +16892,17 @@ export declare class DescribeVpnGatewayResponseBodyTags extends $dara.Model {
16584
16892
  }
16585
16893
  export declare class DescribeVpnGatewayAvailableZonesResponseBodyAvailableZoneIdList extends $dara.Model {
16586
16894
  /**
16895
+ * @remarks
16896
+ * The zone ID.
16897
+ *
16587
16898
  * @example
16588
16899
  * cn-hangzhou-h
16589
16900
  */
16590
16901
  zoneId?: string;
16591
16902
  /**
16903
+ * @remarks
16904
+ * The zone name.
16905
+ *
16592
16906
  * @example
16593
16907
  * cn-hangzhou-h
16594
16908
  */
@@ -17194,8 +17508,35 @@ export declare class DescribeVpnPbrRouteEntriesResponseBodyVpnPbrRouteEntries ex
17194
17508
  });
17195
17509
  }
17196
17510
  export declare class DescribeVpnRouteEntriesResponseBodyVpnRouteCountsVpnRouteCount extends $dara.Model {
17511
+ /**
17512
+ * @remarks
17513
+ * The number of route entries.
17514
+ *
17515
+ * @example
17516
+ * 3
17517
+ */
17197
17518
  routeCount?: number;
17519
+ /**
17520
+ * @remarks
17521
+ * The route type. Valid values:
17522
+ *
17523
+ * * **custom** (default): destination-based route.
17524
+ * * **bgp** : BGP route entry.
17525
+ *
17526
+ * @example
17527
+ * bgp
17528
+ */
17198
17529
  routeEntryType?: string;
17530
+ /**
17531
+ * @remarks
17532
+ * The source of the BGP route. Valid values:
17533
+ *
17534
+ * * **CLOUD**: advertised from a cloud service associated with the VPN gateway.
17535
+ * * **VPN_BGP**: indicates that the current route is learned by using BGP of the VPN gateway. For example, the BGP is used to learn the route of the on-premises data center.
17536
+ *
17537
+ * @example
17538
+ * VPN_BGP
17539
+ */
17199
17540
  source?: string;
17200
17541
  static names(): {
17201
17542
  [key: string]: string;
@@ -17286,7 +17627,10 @@ export declare class DescribeVpnRouteEntriesResponseBodyVpnRouteEntriesVpnRouteE
17286
17627
  routeEntryType?: string;
17287
17628
  /**
17288
17629
  * @remarks
17289
- * The source CIDR block of the route entry.
17630
+ * The source of the BGP route. Valid values:
17631
+ *
17632
+ * * **CLOUD**: advertised from a cloud service associated with the VPN gateway.
17633
+ * * **VPN_BGP**: indicates that the current route is learned by using BGP of the VPN gateway. For example, the BGP is used to learn the route of the on-premises data center.
17290
17634
  *
17291
17635
  * @example
17292
17636
  * 192.168.10.0/24
@@ -22141,7 +22485,7 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22141
22485
  localAsn?: number;
22142
22486
  /**
22143
22487
  * @remarks
22144
- * The BGP IP address of the tunnel. The IP address must fall into the **CIDR block** of the tunnel.
22488
+ * The BGP IP address of the tunnel. The address needs to be an IP address within the **TunnelCidr**.
22145
22489
  *
22146
22490
  * @example
22147
22491
  * 169.254.11.1
@@ -22151,7 +22495,9 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22151
22495
  * @remarks
22152
22496
  * The CIDR block of the tunnel.
22153
22497
  *
22154
- * The CIDR block must fall into 169.254.0.0/16. The subnet mask of the CIDR block must be 30 bits in length.
22498
+ * The CIDR block must fall within 169.254.0.0/16 and the mask of the CIDR block must be 30 bits in length. The CIDR block cannot be 169.254.0.0/30, 169.254.1.0/30, 169.254.2.0/30, 169.254.3.0/30, 169.254.4.0/30, 169.254.5.0/30, 169.254.6.0/30, or 169.254.169.252/30.
22499
+ *
22500
+ * > The CIDR block of the IPsec tunnel for each IPsec-VPN connection on a VPN gateway must be unique.
22155
22501
  *
22156
22502
  * @example
22157
22503
  * 169.254.11.0/30
@@ -22173,8 +22519,16 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22173
22519
  * @remarks
22174
22520
  * The authentication algorithm that is used in IKE Phase 1 negotiations.
22175
22521
  *
22176
- * * Valid values when the IPsec connection is attached to a standard VPN gateway: **md5**, **sha1**, **sha256**, **sha384**, and **sha512**.
22177
- * * Valid values when the IPsec connection is attached to a VPN gateway that uses an SM certificate: **sm3**.
22522
+ *
22523
+ * <props="china">
22524
+ *
22525
+ * * If an IPsec-VPN gateway is associated with a standard VPN gateway, the valid values are **md5**, **sha1**, **sha256**, **sha384**, and **sha512**.
22526
+ * * If the IPsec-VPN gateway is associated with an SSL-VPN gateway, the valid value is **sm3**.
22527
+ *
22528
+ *
22529
+ * <props="intl">
22530
+ *
22531
+ * Valid values: **md5**, **sha1**, **sha256**, **sha384**, and **sha512**.
22178
22532
  *
22179
22533
  * @example
22180
22534
  * sha1
@@ -22184,8 +22538,15 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22184
22538
  * @remarks
22185
22539
  * The encryption algorithm that is used in IKE Phase 1 negotiations.
22186
22540
  *
22187
- * * Valid values when the IPsec connection is attached to a standard VPN gateway: **aes**, **aes192**, **sha256**, **des**, and **3des**.
22188
- * * Valid values when the IPsec connection is attached to a VPN gateway that uses an SM certificate: **sm4**.
22541
+ * <props="china">
22542
+ *
22543
+ * * If an IPsec-VPN gateway is associated with a standard VPN gateway, the valid values are **aes**, **aes192**, **aes256**, **des**, and **3des**.
22544
+ * * If the IPsec-VPN gateway is associated with an SSL-VPN gateway, set the value to **sm4**.
22545
+ *
22546
+ *
22547
+ * <props="intl">
22548
+ *
22549
+ * Valid values: **aes**, **aes192**, **aes256**, **des**, and **3des**.
22189
22550
  *
22190
22551
  * @example
22191
22552
  * aes
@@ -22193,7 +22554,7 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22193
22554
  ikeEncAlg?: string;
22194
22555
  /**
22195
22556
  * @remarks
22196
- * The SA lifetime that is used in IKE Phase 1 negotiations. Unit: seconds. Valid values: **0 to 86400**.
22557
+ * The SA lifetime as a result of Phase 1 negotiations. Unit: seconds Valid values: **0 to 86400**.
22197
22558
  *
22198
22559
  * @example
22199
22560
  * 86400
@@ -22201,10 +22562,10 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22201
22562
  ikeLifetime?: number;
22202
22563
  /**
22203
22564
  * @remarks
22204
- * The IKE negotiation mode. Valid values:
22565
+ * The negotiation mode of IKE. Valid values:
22205
22566
  *
22206
22567
  * * **main:** This mode offers higher security during negotiations.
22207
- * * **aggressive:** This mode is faster and has a higher success rate.
22568
+ * * **aggressive**: This mode is faster and has a higher success rate.
22208
22569
  *
22209
22570
  * @example
22210
22571
  * main
@@ -22212,7 +22573,7 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22212
22573
  ikeMode?: string;
22213
22574
  /**
22214
22575
  * @remarks
22215
- * The Diffie-Hellman (DH) key exchange algorithm that is used in IKE Phase 1 negotiations. Valid values: **group1**, **group2**, **group5**, and **group14**.
22576
+ * The Diffie-Hellman key exchange algorithm that is used in Phase 1 negotiations. Valid values: **group1**, **group2**, **group5**, and **group14**.
22216
22577
  *
22217
22578
  * @example
22218
22579
  * group2
@@ -22220,7 +22581,7 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22220
22581
  ikePfs?: string;
22221
22582
  /**
22222
22583
  * @remarks
22223
- * The IKE version. Valid values: **ikev1** and **ikev2**.
22584
+ * The version of the IKE protocol. Valid values: **ikev1** and **ikev2**.
22224
22585
  *
22225
22586
  * @example
22226
22587
  * ikev2
@@ -22228,7 +22589,7 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22228
22589
  ikeVersion?: string;
22229
22590
  /**
22230
22591
  * @remarks
22231
- * The tunnel identifier. The identifier can be up to 100 characters in length, and supports fully qualified domain names (FQDNs) and IP addresses. The default identifier is the tunnel IP address.
22592
+ * The tunnel identifier. The identifier can be up to 100 characters in length and cannot contain spaces. It supports fully qualified domain names (FQDNs) and IP addresses. The default value is the IP address of the tunnel.
22232
22593
  *
22233
22594
  * @example
22234
22595
  * 47.XX.XX.87
@@ -22238,8 +22599,8 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22238
22599
  * @remarks
22239
22600
  * The pre-shared key that is used to verify identities between the tunnel and peer.
22240
22601
  *
22241
- * * It must be 1 to 100 characters in length, and can contain letters, digits, and the following characters: ``~!`@#$%^&*()_-+={}[]|;:\\",.<>/?``
22242
- * * If you do not specify a pre-shared key, the system generates a random 16-character string as the pre-shared key. You can call the [DescribeVpnConnection](https://help.aliyun.com/document_detail/120374.html) operation to query the pre-shared key that is generated by the system.
22602
+ * * The key must be 1 to 100 characters in length, and can contain digits, and letters. It cannot contain spaces. ``~!`@#$%^&*()_-+={}[]|;:\\",.<>/?``
22603
+ * * If you do not specify a pre-shared key, the system randomly generates a 16-bit string as the key. You can call the [DescribeVpnConnection](https://help.aliyun.com/document_detail/120374.html) operation to query the pre-shared key that is automatically generated by the system.
22243
22604
  *
22244
22605
  * > The pre-shared key that is configured for the tunnel and the tunnel peer must be the same. Otherwise, the system cannot establish the tunnel.
22245
22606
  *
@@ -22249,7 +22610,7 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22249
22610
  psk?: string;
22250
22611
  /**
22251
22612
  * @remarks
22252
- * The peer identifier. The identifier can be up to 100 characters in length, and supports FQDNs and IP addresses. The default identifier is the IP address of the customer gateway associated with the tunnel.
22613
+ * The peer identifier. The identifier can be up to 100 characters in length, and cannot contain spaces. It supports FQDNs and IP addresses. The default identifier is the IP address of the customer gateway associated with the tunnel.
22253
22614
  *
22254
22615
  * @example
22255
22616
  * 47.XX.XX.207
@@ -22271,8 +22632,16 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22271
22632
  * @remarks
22272
22633
  * The authentication algorithm that is used in IPsec Phase 2 negotiations.
22273
22634
  *
22274
- * * Valid values when the IPsec connection is attached to a standard VPN gateway: **md5**, **sha1**, **sha256**, **sha384**, and **sha512**.
22275
- * * Valid values when the IPsec connection is attached to a VPN gateway that uses an SM certificate: **sm3**.
22635
+ * <props="china">
22636
+ *
22637
+ * * If an IPsec-VPN gateway is associated with a standard VPN gateway, the valid values are **md5**, **sha1**, **sha256**, **sha384**, and **sha512**.
22638
+ * * If the IPsec-VPN gateway is associated with an SSL-VPN gateway, set the value to **sm3**.
22639
+ *
22640
+ *
22641
+ *
22642
+ * <props="intl">
22643
+ *
22644
+ * Valid values: **md5**, **sha1**, **sha256**, **sha384**, and **sha512**.
22276
22645
  *
22277
22646
  * @example
22278
22647
  * sha1
@@ -22282,8 +22651,16 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22282
22651
  * @remarks
22283
22652
  * The encryption algorithm that is used in IPsec Phase 2 negotiations.
22284
22653
  *
22285
- * * Valid values when the IPsec connection is attached to a standard VPN gateway: **aes**, **aes192**, **sha256**, **des**, and **3des**.
22286
- * * Valid values when the IPsec connection is attached to a VPN gateway that uses an SM certificate: **sm4**.
22654
+ * <props="china">
22655
+ *
22656
+ * * If an IPsec-VPN gateway is associated with a standard VPN gateway, the valid values are **aes**, **aes192**, **aes256**, **des**, and **3des**.
22657
+ * * If the IPsec connection is attached to a VPN gateway that uses an SM certificate, set the value to **sm4**.
22658
+ *
22659
+ *
22660
+ *
22661
+ * <props="intl">
22662
+ *
22663
+ * Valid values: **aes**, **aes192**, **aes256**, **des**, and **3des**.
22287
22664
  *
22288
22665
  * @example
22289
22666
  * aes
@@ -22291,7 +22668,7 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22291
22668
  ipsecEncAlg?: string;
22292
22669
  /**
22293
22670
  * @remarks
22294
- * The SA lifetime that is used in IPsec Phase 2 negotiations. Unit: seconds. Valid values: **0 to 86400**.
22671
+ * The SA lifetime as a result of Phase 2 negotiations. Unit: seconds Valid values: **0 to 86400**.
22295
22672
  *
22296
22673
  * @example
22297
22674
  * 86400
@@ -22299,7 +22676,7 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22299
22676
  ipsecLifetime?: number;
22300
22677
  /**
22301
22678
  * @remarks
22302
- * The DH key exchange algorithm that is used in IPsec Phase 2 negotiations. Valid values: **disabled**, **group1**, **group2**, **group5**, and **group14**.
22679
+ * The Diffie-Hellman key exchange algorithm that is used in Phase 2 negotiations. Valid values: **disabled**, **group1**, **group2**, **group5**, and **group14**.
22303
22680
  *
22304
22681
  * @example
22305
22682
  * group2
@@ -22317,12 +22694,19 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22317
22694
  });
22318
22695
  }
22319
22696
  export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecification extends $dara.Model {
22697
+ /**
22698
+ * @remarks
22699
+ * The ID of the customer gateway associated with the tunnel.
22700
+ *
22701
+ * @example
22702
+ * cgw-1nmwbpgrp7ssqm1yn****
22703
+ */
22320
22704
  customerGatewayId?: string;
22321
22705
  /**
22322
22706
  * @remarks
22323
- * Specifies whether to enable the dead peer detection (DPD) feature. Valid values:
22707
+ * Specifies whether to enable dead peer detection (DPD). Valid values:
22324
22708
  *
22325
- * * **true**: DPD is enabled. The IPsec initiator sends DPD packets to verify the existence and availability of the IPsec peer. If no response is received from the peer within a specified period of time, the IPsec peer is considered disconnected. Then, the ISAKMP SA, IPsec SA, and IPsec tunnel are deleted.
22709
+ * * **true** The IPsec initiator sends DPD packets to check the IPsec peer is alive. If no response is received from the peer within a specified period of time, the IPsec peer is considered disconnected. Then, the ISAKMP SA, IPsec SA, and IPsec tunnel are deleted.
22326
22710
  * * **false**: DPD is disabled. The IPsec initiator does not send DPD packets.
22327
22711
  *
22328
22712
  * @example
@@ -22333,8 +22717,8 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecification exte
22333
22717
  * @remarks
22334
22718
  * Specifies whether to enable NAT traversal. Valid values:
22335
22719
  *
22336
- * * **true**: NAT traversal is enabled. After NAT traversal is enabled, the initiator does not check the UDP ports during Internet Key Exchange (IKE) negotiations and can automatically discover NAT gateway devices along the IPsec-VPN tunnel.
22337
- * * **false**: NAT traversal is disabled.
22720
+ * * **true**: enables NAT traversal. After NAT traversal is enabled, the initiator does not check the UDP ports during IKE negotiations and can automatically discover NAT gateway devices along the IPsec-VPN tunnel.
22721
+ * * **false**: disables NAT traversal.
22338
22722
  *
22339
22723
  * @example
22340
22724
  * true
@@ -22352,7 +22736,7 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecification exte
22352
22736
  * @remarks
22353
22737
  * The Border Gateway Protocol (BGP) configurations of the tunnel.
22354
22738
  *
22355
- * If the BGP feature is not enabled for the tunnel, you must call the [ModifyVpnConnectionAttribute](https://help.aliyun.com/document_detail/120381.html) operation to enable the BGP feature for the tunnel and configure BGP.
22739
+ * If the BGP feature is not enabled for the tunnel, you must call the [ModifyVpnConnectionAttribute](https://help.aliyun.com/document_detail/120381.html) operation to enable the feature and configure BGP.
22356
22740
  */
22357
22741
  tunnelBgpConfig?: ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunnelBgpConfig;
22358
22742
  /**
@@ -22636,8 +23020,33 @@ export declare class ModifyVpcPrefixListRequestRemovePrefixListEntry extends $da
22636
23020
  });
22637
23021
  }
22638
23022
  export declare class ModifyVpnAttachmentAttributeRequestTunnelOptionsSpecificationTunnelBgpConfig extends $dara.Model {
23023
+ /**
23024
+ * @remarks
23025
+ * The autonomous system number (ASN) of the tunnel on the Alibaba Cloud side. Valid values: **1** to **4294967295**. Default value: **45104**.
23026
+ *
23027
+ * > We recommend that you use a private ASN to establish BGP connections to Alibaba Cloud. Refer to the relevant documentation for the private ASN range.
23028
+ *
23029
+ * @example
23030
+ * 65530
23031
+ */
22639
23032
  localAsn?: number;
23033
+ /**
23034
+ * @remarks
23035
+ * The BGP IP address of the tunnel on the Alibaba Cloud side. The address is an IP address that falls within the BGP CIDR block.
23036
+ *
23037
+ * @example
23038
+ * 169.254.10.1
23039
+ */
22640
23040
  localBgpIp?: string;
23041
+ /**
23042
+ * @remarks
23043
+ * The BGP CIDR block of the tunnel. The CIDR block must fall within 169.254.0.0/16 and the mask of the CIDR block must be 30 bits in length. The CIDR block cannot be 169.254.0.0/30, 169.254.1.0/30, 169.254.2.0/30, 169.254.3.0/30, 169.254.4.0/30, 169.254.5.0/30, 169.254.6.0/30, or 169.254.169.252/30.
23044
+ *
23045
+ * > The two tunnels of an IPsec connection must use different CIDR blocks.
23046
+ *
23047
+ * @example
23048
+ * 169.254.10.0/30
23049
+ */
22641
23050
  tunnelCidr?: string;
22642
23051
  static names(): {
22643
23052
  [key: string]: string;
@@ -22651,14 +23060,93 @@ export declare class ModifyVpnAttachmentAttributeRequestTunnelOptionsSpecificati
22651
23060
  });
22652
23061
  }
22653
23062
  export declare class ModifyVpnAttachmentAttributeRequestTunnelOptionsSpecificationTunnelIkeConfig extends $dara.Model {
23063
+ /**
23064
+ * @remarks
23065
+ * The authentication algorithm that is used in Phase 1 negotiations. Valid values: **md5**, **sha1**, **sha256**, **sha384**, and **sha512**.
23066
+ *
23067
+ * @example
23068
+ * sha1
23069
+ */
22654
23070
  ikeAuthAlg?: string;
23071
+ /**
23072
+ * @remarks
23073
+ * The encryption algorithm that is used in Phase 1 negotiations. Valid values: **aes**, **aes192**, **aes256**, **des**, and **3des**.
23074
+ *
23075
+ * @example
23076
+ * aes
23077
+ */
22655
23078
  ikeEncAlg?: string;
23079
+ /**
23080
+ * @remarks
23081
+ * The SA lifetime as a result of Phase 1 negotiations. Unit: seconds.
23082
+ *
23083
+ * Valid values: **0** to **86400**.
23084
+ *
23085
+ * @example
23086
+ * 86400
23087
+ */
22656
23088
  ikeLifetime?: number;
23089
+ /**
23090
+ * @remarks
23091
+ * The negotiation mode of IKE. Valid values: **main** and **aggressive**.
23092
+ *
23093
+ * * **main:** This mode offers higher security during negotiations.
23094
+ * * **aggressive**: This mode is faster with a higher success rate.
23095
+ *
23096
+ * @example
23097
+ * main
23098
+ */
22657
23099
  ikeMode?: string;
23100
+ /**
23101
+ * @remarks
23102
+ * The Diffie-Hellman key exchange algorithm that is used in Phase 1 negotiations. Valid values: **group1**, **group2**, **group5**, and **group14**.
23103
+ *
23104
+ * @example
23105
+ * group2
23106
+ */
22658
23107
  ikePfs?: string;
23108
+ /**
23109
+ * @remarks
23110
+ * The version of the IKE protocol. Valid values: **ikev1** and **ikev2**.
23111
+ *
23112
+ * Compared with IKEv1, IKEv2 simplifies the SA negotiation process and provides better support for scenarios with multiple CIDR blocks.
23113
+ *
23114
+ * @example
23115
+ * ikev2
23116
+ */
22659
23117
  ikeVersion?: string;
23118
+ /**
23119
+ * @remarks
23120
+ * The identifier of the tunnel on the Alibaba Cloud side, which is used in Phase 1 negotiations. The identifier cannot exceed 100 characters in length and cannot contain spaces.
23121
+ *
23122
+ * **LocalId** supports fully qualified domain names (FQDNs). If you use an FQDN, we recommend that you set the negotiation mode to **aggressive**.
23123
+ *
23124
+ * @example
23125
+ * 47.XX.XX.1
23126
+ */
22660
23127
  localId?: string;
23128
+ /**
23129
+ * @remarks
23130
+ * The pre-shared key that is used for identity authentication between the tunnel and the tunnel peer.
23131
+ *
23132
+ * * The key must be 1 to 100 characters in length, and can contain digits, and letters. The key cannot contain spaces. ``~!\\`@#$%^&*()_-+={}[]|;:\\",.<>/?``
23133
+ * * If you do not specify a pre-shared key, the system randomly generates a 16-bit string as the pre-shared key. You can call the [DescribeVpnAttachments](https://help.aliyun.com/document_detail/2526939.html) operation to query the pre-shared key that is automatically generated by the system.
23134
+ *
23135
+ * > The tunnel and the tunnel peer must use the same pre-shared key. Otherwise, the tunnel cannot be established.
23136
+ *
23137
+ * @example
23138
+ * 123456****
23139
+ */
22661
23140
  psk?: string;
23141
+ /**
23142
+ * @remarks
23143
+ * The identifier of the tunnel peer, which is used in Phase 1 negotiations. The identifier cannot exceed 100 characters in length and cannot contain spaces.
23144
+ *
23145
+ * **RemoteId** supports FQDNs. If you use an FQDN, we recommend that you set the negotiation mode to **aggressive**.
23146
+ *
23147
+ * @example
23148
+ * 47.XX.XX.2
23149
+ */
22662
23150
  remoteId?: string;
22663
23151
  static names(): {
22664
23152
  [key: string]: string;
@@ -22672,9 +23160,43 @@ export declare class ModifyVpnAttachmentAttributeRequestTunnelOptionsSpecificati
22672
23160
  });
22673
23161
  }
22674
23162
  export declare class ModifyVpnAttachmentAttributeRequestTunnelOptionsSpecificationTunnelIpsecConfig extends $dara.Model {
23163
+ /**
23164
+ * @remarks
23165
+ * The authentication algorithm that is used in Phase 2 negotiations.
23166
+ *
23167
+ * Valid values: **md5**, **sha1**, **sha256**, **sha384**, and **sha512**.
23168
+ *
23169
+ * @example
23170
+ * sha1
23171
+ */
22675
23172
  ipsecAuthAlg?: string;
23173
+ /**
23174
+ * @remarks
23175
+ * The encryption algorithm that is used in Phase 2 negotiations. Valid values: **aes**, **aes192**, **aes256**, **des**, and **3des**.
23176
+ *
23177
+ * @example
23178
+ * aes
23179
+ */
22676
23180
  ipsecEncAlg?: string;
23181
+ /**
23182
+ * @remarks
23183
+ * The SA lifetime as a result of Phase 2 negotiations. Unit: seconds.
23184
+ *
23185
+ * Valid values: **0** to **86400**.
23186
+ *
23187
+ * @example
23188
+ * 86400
23189
+ */
22677
23190
  ipsecLifetime?: number;
23191
+ /**
23192
+ * @remarks
23193
+ * The Diffie-Hellman key exchange algorithm that is used in Phase 2 negotiations.
23194
+ *
23195
+ * Valid values: **disabled**, **group1**, **group2**, **group5**, and **group14**.
23196
+ *
23197
+ * @example
23198
+ * group2
23199
+ */
22678
23200
  ipsecPfs?: string;
22679
23201
  static names(): {
22680
23202
  [key: string]: string;
@@ -22688,13 +23210,73 @@ export declare class ModifyVpnAttachmentAttributeRequestTunnelOptionsSpecificati
22688
23210
  });
22689
23211
  }
22690
23212
  export declare class ModifyVpnAttachmentAttributeRequestTunnelOptionsSpecification extends $dara.Model {
23213
+ /**
23214
+ * @remarks
23215
+ * The ID of the customer gateway that is associated with the tunnel.
23216
+ *
23217
+ * > This parameter is only supported in dual-tunnel IPsec-VPN connections.
23218
+ *
23219
+ * @example
23220
+ * cgw-p0w2jemrcj5u61un8****
23221
+ */
22691
23222
  customerGatewayId?: string;
23223
+ /**
23224
+ * @remarks
23225
+ * Specifies whether to enable the Dead Peer Detection (DPD) feature for the tunnel. Valid values:
23226
+ *
23227
+ * * **true**: enables DPD. The initiator of the IPsec-VPN connection sends DPD packets to check the existence and availability of the peer. If no feedback is received from the peer within the specified period of time, the connection fails. In this case, ISAKMP SA and IPsec SA are deleted along with the security tunnel.
23228
+ * * **false**: disables DPD. The initiator of the IPsec-VPN connection does not send DPD packets.
23229
+ *
23230
+ * @example
23231
+ * true
23232
+ */
22692
23233
  enableDpd?: boolean;
23234
+ /**
23235
+ * @remarks
23236
+ * Specifies whether to enable NAT traversal for the tunnel. Valid values:
23237
+ *
23238
+ * * **true**: enables NAT traversal. After NAT traversal is enabled, the initiator does not check the UDP ports during IKE negotiations and can automatically discover NAT gateway devices along the IPsec-VPN tunnel.
23239
+ * * **false**: disables NAT traversal.
23240
+ *
23241
+ * @example
23242
+ * true
23243
+ */
22693
23244
  enableNatTraversal?: boolean;
23245
+ /**
23246
+ * @remarks
23247
+ * Add BGP configurations for the tunnel.
23248
+ *
23249
+ * > If you enable BGP for an IPsec-VPN connection, you must set **EnableTunnelsBgp** parameter to **true**.
23250
+ */
22694
23251
  tunnelBgpConfig?: ModifyVpnAttachmentAttributeRequestTunnelOptionsSpecificationTunnelBgpConfig;
23252
+ /**
23253
+ * @remarks
23254
+ * The tunnel ID.
23255
+ *
23256
+ * @example
23257
+ * tun-0jod7plwf2a0o9lvu****
23258
+ */
22695
23259
  tunnelId?: string;
23260
+ /**
23261
+ * @remarks
23262
+ * The configuration of Phase 1 negotiations.
23263
+ */
22696
23264
  tunnelIkeConfig?: ModifyVpnAttachmentAttributeRequestTunnelOptionsSpecificationTunnelIkeConfig;
23265
+ /**
23266
+ * @remarks
23267
+ * The order in which the tunnel was created.
23268
+ *
23269
+ * * **1**: Tunnel 1.
23270
+ * * **2**: Tunnel 2.
23271
+ *
23272
+ * @example
23273
+ * 1
23274
+ */
22697
23275
  tunnelIndex?: number;
23276
+ /**
23277
+ * @remarks
23278
+ * The configuration of Phase 2 negotiations.
23279
+ */
22698
23280
  tunnelIpsecConfig?: ModifyVpnAttachmentAttributeRequestTunnelOptionsSpecificationTunnelIpsecConfig;
22699
23281
  static names(): {
22700
23282
  [key: string]: string;
@@ -22734,7 +23316,10 @@ export declare class ModifyVpnAttachmentAttributeResponseBodyIkeConfig extends $
22734
23316
  ikeLifetime?: number;
22735
23317
  /**
22736
23318
  * @remarks
22737
- * The negotiation mode.
23319
+ * The IKE negotiation mode.
23320
+ *
23321
+ * * **main:** This mode offers higher security during negotiations.
23322
+ * * **aggressive**: This mode is faster with a higher success rate.
22738
23323
  *
22739
23324
  * @example
22740
23325
  * main
@@ -22752,6 +23337,11 @@ export declare class ModifyVpnAttachmentAttributeResponseBodyIkeConfig extends $
22752
23337
  * @remarks
22753
23338
  * The version of the IKE protocol.
22754
23339
  *
23340
+ * * **ikev1**
23341
+ * * **ikev2**
23342
+ *
23343
+ * Compared with IKEv1, IKEv2 simplifies the SA negotiation process and provides better support for scenarios with multiple CIDR blocks.
23344
+ *
22755
23345
  * @example
22756
23346
  * ikev1
22757
23347
  */
@@ -22766,9 +23356,9 @@ export declare class ModifyVpnAttachmentAttributeResponseBodyIkeConfig extends $
22766
23356
  localId?: string;
22767
23357
  /**
22768
23358
  * @remarks
22769
- * The pre-shared key that is used for identity authentication between the VPN gateway and the data center.
23359
+ * Enter a pre-shared key that is used for identity authentication between Alibaba Cloud and the data center.
22770
23360
  *
22771
- * > The pre-shared key of the IPsec-VPN connection must be the same as the authentication key of the data center. Otherwise, you cannot establish a connection between the data center and the VPN gateway.
23361
+ * > The pre-shared key of the IPsec-VPN connection must be the same as the authentication key of the on-premises data center. Otherwise, connections between the on-premises data center and Alibaba Cloud cannot be established.
22772
23362
  *
22773
23363
  * @example
22774
23364
  * 1234***
@@ -22838,10 +23428,45 @@ export declare class ModifyVpnAttachmentAttributeResponseBodyIpsecConfig extends
22838
23428
  });
22839
23429
  }
22840
23430
  export declare class ModifyVpnAttachmentAttributeResponseBodyTunnelOptionsSpecificationTunnelBgpConfig extends $dara.Model {
23431
+ /**
23432
+ * @remarks
23433
+ * The ASN on the Alibaba Cloud side.
23434
+ *
23435
+ * @example
23436
+ * 65530
23437
+ */
22841
23438
  localAsn?: number;
23439
+ /**
23440
+ * @remarks
23441
+ * The BGP IP address of the tunnel on the Alibaba Cloud side.
23442
+ *
23443
+ * @example
23444
+ * 169.254.10.1
23445
+ */
22842
23446
  localBgpIp?: string;
23447
+ /**
23448
+ * @remarks
23449
+ * The ASN of the tunnel peer.
23450
+ *
23451
+ * @example
23452
+ * 65531
23453
+ */
22843
23454
  peerAsn?: number;
23455
+ /**
23456
+ * @remarks
23457
+ * The BGP IP address of the tunnel peer.
23458
+ *
23459
+ * @example
23460
+ * 169.254.10.2
23461
+ */
22844
23462
  peerBgpIp?: string;
23463
+ /**
23464
+ * @remarks
23465
+ * The BGP CIDR block of the tunnel.
23466
+ *
23467
+ * @example
23468
+ * 169.254.10.0/30
23469
+ */
22845
23470
  tunnelCidr?: string;
22846
23471
  static names(): {
22847
23472
  [key: string]: string;
@@ -22855,14 +23480,80 @@ export declare class ModifyVpnAttachmentAttributeResponseBodyTunnelOptionsSpecif
22855
23480
  });
22856
23481
  }
22857
23482
  export declare class ModifyVpnAttachmentAttributeResponseBodyTunnelOptionsSpecificationTunnelIkeConfig extends $dara.Model {
23483
+ /**
23484
+ * @remarks
23485
+ * The authentication algorithm in the IKE phase.
23486
+ *
23487
+ * @example
23488
+ * sha1
23489
+ */
22858
23490
  ikeAuthAlg?: string;
23491
+ /**
23492
+ * @remarks
23493
+ * The encryption algorithm in the IKE phase.
23494
+ *
23495
+ * @example
23496
+ * aes
23497
+ */
22859
23498
  ikeEncAlg?: string;
23499
+ /**
23500
+ * @remarks
23501
+ * The lifetime in the IKE phase. Unit: seconds.
23502
+ *
23503
+ * @example
23504
+ * 86400
23505
+ */
22860
23506
  ikeLifetime?: number;
23507
+ /**
23508
+ * @remarks
23509
+ * The negotiation mode of IKE. Valid values:
23510
+ *
23511
+ * * **main:** This mode offers higher security during negotiations.
23512
+ * * **aggressive**: This mode is faster with a higher success rate.
23513
+ *
23514
+ * @example
23515
+ * main
23516
+ */
22861
23517
  ikeMode?: string;
23518
+ /**
23519
+ * @remarks
23520
+ * The Diffie-Hellman (DH) group in the IKE phase.
23521
+ *
23522
+ * @example
23523
+ * group2
23524
+ */
22862
23525
  ikePfs?: string;
23526
+ /**
23527
+ * @remarks
23528
+ * The version of the IKE protocol.
23529
+ *
23530
+ * @example
23531
+ * ikev2
23532
+ */
22863
23533
  ikeVersion?: string;
23534
+ /**
23535
+ * @remarks
23536
+ * The identifier of the tunnel on the Alibaba Cloud side.
23537
+ *
23538
+ * @example
23539
+ * 47.XX.XX.1
23540
+ */
22864
23541
  localId?: string;
23542
+ /**
23543
+ * @remarks
23544
+ * The pre-shared key.
23545
+ *
23546
+ * @example
23547
+ * 123456****
23548
+ */
22865
23549
  psk?: string;
23550
+ /**
23551
+ * @remarks
23552
+ * The peer identifier.
23553
+ *
23554
+ * @example
23555
+ * 47.XX.XX.2
23556
+ */
22866
23557
  remoteId?: string;
22867
23558
  static names(): {
22868
23559
  [key: string]: string;
@@ -22876,9 +23567,37 @@ export declare class ModifyVpnAttachmentAttributeResponseBodyTunnelOptionsSpecif
22876
23567
  });
22877
23568
  }
22878
23569
  export declare class ModifyVpnAttachmentAttributeResponseBodyTunnelOptionsSpecificationTunnelIpsecConfig extends $dara.Model {
23570
+ /**
23571
+ * @remarks
23572
+ * The authentication algorithm in the IPsec phase.
23573
+ *
23574
+ * @example
23575
+ * sha1
23576
+ */
22879
23577
  ipsecAuthAlg?: string;
23578
+ /**
23579
+ * @remarks
23580
+ * The encryption algorithm in the IPsec phase.
23581
+ *
23582
+ * @example
23583
+ * aes
23584
+ */
22880
23585
  ipsecEncAlg?: string;
23586
+ /**
23587
+ * @remarks
23588
+ * The lifetime in the IPsec phase. Unit: seconds.
23589
+ *
23590
+ * @example
23591
+ * 86400
23592
+ */
22881
23593
  ipsecLifetime?: number;
23594
+ /**
23595
+ * @remarks
23596
+ * The DH group in the IPsec phase.
23597
+ *
23598
+ * @example
23599
+ * group2
23600
+ */
22882
23601
  ipsecPfs?: string;
22883
23602
  static names(): {
22884
23603
  [key: string]: string;
@@ -22892,16 +23611,100 @@ export declare class ModifyVpnAttachmentAttributeResponseBodyTunnelOptionsSpecif
22892
23611
  });
22893
23612
  }
22894
23613
  export declare class ModifyVpnAttachmentAttributeResponseBodyTunnelOptionsSpecification extends $dara.Model {
23614
+ /**
23615
+ * @remarks
23616
+ * The ID of the customer gateway that is associated with the tunnel.
23617
+ *
23618
+ * @example
23619
+ * cgw-p0w2jemrcj5u61un8****
23620
+ */
22895
23621
  customerGatewayId?: string;
23622
+ /**
23623
+ * @remarks
23624
+ * Whether the DPD feature is enabled for the tunnel.
23625
+ *
23626
+ * * **true**: The feature is enabled.
23627
+ * * **false**: The feature is disabled.
23628
+ *
23629
+ * @example
23630
+ * true
23631
+ */
22896
23632
  enableDpd?: boolean;
23633
+ /**
23634
+ * @remarks
23635
+ * Indicates whether traversal feature is enabled for the tunnel. Valid values:
23636
+ *
23637
+ * * **true**: The feature is enabled.
23638
+ * * **false**: The feature is disabled.
23639
+ *
23640
+ * @example
23641
+ * true
23642
+ */
22897
23643
  enableNatTraversal?: boolean;
23644
+ /**
23645
+ * @remarks
23646
+ * The IP address on the Alibaba Cloud side.
23647
+ *
23648
+ * @example
23649
+ * 47.XX.XX.66
23650
+ */
22898
23651
  internetIp?: string;
23652
+ /**
23653
+ * @remarks
23654
+ * The tunnel role. Valid values:
23655
+ *
23656
+ * * **master**: The tunnel is an active tunnel.
23657
+ * * **slave**: The tunnel is a standby tunnel.
23658
+ *
23659
+ * @example
23660
+ * master
23661
+ */
22899
23662
  role?: string;
23663
+ /**
23664
+ * @remarks
23665
+ * The status of the tunnel. Valid values:
23666
+ *
23667
+ * * **active**: The tunnel is active.
23668
+ * * **updating**: The tunnel is being updated.
23669
+ * * **deleting:** The tunnel is being deleted.
23670
+ *
23671
+ * @example
23672
+ * active
23673
+ */
22900
23674
  state?: string;
23675
+ /**
23676
+ * @remarks
23677
+ * BGP configuration.
23678
+ */
22901
23679
  tunnelBgpConfig?: ModifyVpnAttachmentAttributeResponseBodyTunnelOptionsSpecificationTunnelBgpConfig;
23680
+ /**
23681
+ * @remarks
23682
+ * The tunnel ID.
23683
+ *
23684
+ * @example
23685
+ * tun-0jod7plwf2a0o9lvu****
23686
+ */
22902
23687
  tunnelId?: string;
23688
+ /**
23689
+ * @remarks
23690
+ * The configurations of Phase 1 negotiations.
23691
+ */
22903
23692
  tunnelIkeConfig?: ModifyVpnAttachmentAttributeResponseBodyTunnelOptionsSpecificationTunnelIkeConfig;
23693
+ /**
23694
+ * @remarks
23695
+ * The order in which the tunnel was created.
23696
+ *
23697
+ * * **1**: Tunnel 1.
23698
+ * * **2**: Tunnel 2.
23699
+ *
23700
+ * @example
23701
+ * 1
23702
+ */
22904
23703
  tunnelIndex?: number;
23704
+ /**
23705
+ * @remarks
23706
+ * The configurations of Phase 2 negotiations.
23707
+ */
22905
23708
  tunnelIpsecConfig?: ModifyVpnAttachmentAttributeResponseBodyTunnelOptionsSpecificationTunnelIpsecConfig;
22906
23709
  static names(): {
22907
23710
  [key: string]: string;
@@ -26175,7 +26978,10 @@ export declare class AllocateIpv6AddressResponse extends $dara.Model {
26175
26978
  export declare class AllocateIpv6InternetBandwidthRequest extends $dara.Model {
26176
26979
  /**
26177
26980
  * @remarks
26178
- * The Internet bandwidth of the IPv6 gateway. Unit: Mbit/s. Valid values: **1 to 5000**.
26981
+ * The Internet bandwidth of the IPv6 address. Unit: Mbit/s.
26982
+ *
26983
+ * * If you set **InternetChargeType** to **PayByTraffic**, valid values are **1** to **1000**.
26984
+ * * If you set **InternetChargeType** to **PayByBandwidth**, valid values are **1** to **2000**.
26179
26985
  *
26180
26986
  * This parameter is required.
26181
26987
  *
@@ -26195,6 +27001,16 @@ export declare class AllocateIpv6InternetBandwidthRequest extends $dara.Model {
26195
27001
  * 123e4567-e89b-12d3-a456-426655440000
26196
27002
  */
26197
27003
  clientToken?: string;
27004
+ /**
27005
+ * @remarks
27006
+ * Specifies whether to perform only a dry run, without performing the actual request. Valid values:
27007
+ *
27008
+ * * **true**: performs only a dry run. The system checks the request for potential issues, including invalid AccessKey pairs, unauthorized RAM users, and missing parameter values. If the request fails the dry run, an error message is returned. If the request passes the dry run, the `DryRunOperation` error code is returned.
27009
+ * * **false**: sends the API request. After the request passes the check, a 2XX HTTP status code is returned and the route table is associated. This is the default value.
27010
+ *
27011
+ * @example
27012
+ * false
27013
+ */
26198
27014
  dryRun?: boolean;
26199
27015
  /**
26200
27016
  * @remarks
@@ -28438,7 +29254,7 @@ export declare class CheckVpnBgpEnabledRequest extends $dara.Model {
28438
29254
  *
28439
29255
  * You can use the client to generate the token, but you must make sure that the token is unique among different requests. The token can contain only ASCII characters.
28440
29256
  *
28441
- * > If you do not specify this parameter, the system automatically uses the **request ID** as the **client token**. The **request ID** may be different for each request.
29257
+ * > If you do not specify this parameter, the system automatically uses the **request ID** as the **client token**. The **request ID** may be different for each request.
28442
29258
  *
28443
29259
  * @example
28444
29260
  * 123e4567-e89b-12d3-a456-4266****
@@ -29510,11 +30326,14 @@ export declare class CreateCommonBandwidthPackageResponse extends $dara.Model {
29510
30326
  export declare class CreateCustomerGatewayRequest extends $dara.Model {
29511
30327
  /**
29512
30328
  * @remarks
29513
- * The autonomous system number (ASN) of the gateway device in the data center.
30329
+ * The autonomous system number (ASN) of the gateway device in your data center. This parameter is required If you want to use Border Gateway Protocol (BGP) for the IPsec-VPN connection. Valid values: 1 to 4294967295. 45104 is not supported.
30330
+ *
30331
+ * **Asn** is a 4-byte number. You can enter it in two segments and separate the first 16 bits from the following 16 bits with a period (.). Enter the number in each segment in decimal format.
29514
30332
  *
29515
- * **Asn** is a 4-byte number. You can enter the number in two segments and separate the first 16 bits from the following 16 bits with a period (.). Enter the number in each segment in the decimal format.
30333
+ * For example, if you enter 123.456, the ASN is 8061384. The ASN is calculated by using the following formula: 123 × 65536 + 456 = 8061384.
29516
30334
  *
29517
- * For example, if you enter 123.456, the ASN is: 123 × 65536 + 456 = 8061384.
30335
+ * > - We recommend that you use a private ASN to establish BGP connections to Alibaba Cloud. For information about the range of private ASNs, see the relevant documentation.
30336
+ * > - 45104 is a unique identifier assigned by IANA to Alibaba Cloud. It is used to identify Alibaba Cloud during route selection and data transmission over the Internet.
29518
30337
  *
29519
30338
  * @example
29520
30339
  * 65530
@@ -29554,7 +30373,18 @@ export declare class CreateCustomerGatewayRequest extends $dara.Model {
29554
30373
  description?: string;
29555
30374
  /**
29556
30375
  * @remarks
29557
- * The public IP address of the gateway device in the data center.
30376
+ * The static IP address of the gateway device in the data center.
30377
+ *
30378
+ * * If you want to create a public IPsec-VPN connection, enter a public IP address.
30379
+ * * If you want to create a private IPsec-VPN connection, enter a private IP address.
30380
+ *
30381
+ * You cannot use the following IP addresses. Otherwise, a IPsec-VPN connection cannot be established:
30382
+ *
30383
+ * * 100.64.0.0~100.127.255.255
30384
+ * * 127.0.0.0~127.255.255.255
30385
+ * * 169.254.0.0~169.254.255.255
30386
+ * * 224.0.0.0~239.255.255.255
30387
+ * * 255.0.0.0~255.255.255.255
29558
30388
  *
29559
30389
  * This parameter is required.
29560
30390
  *
@@ -29649,7 +30479,7 @@ export declare class CreateCustomerGatewayResponseBody extends $dara.Model {
29649
30479
  description?: string;
29650
30480
  /**
29651
30481
  * @remarks
29652
- * The public IP address of the gateway device in the data center.
30482
+ * The static IP address of the gateway device in the on-premises data center.
29653
30483
  *
29654
30484
  * @example
29655
30485
  * 101.12.XX.XX
@@ -31017,8 +31847,6 @@ export declare class CreateFlowLogRequest extends $dara.Model {
31017
31847
  * * The name must start and end with a lowercase letter or a digit.
31018
31848
  * * The name must be 3 to 63 characters in length.
31019
31849
  *
31020
- * This parameter is required.
31021
- *
31022
31850
  * @example
31023
31851
  * FlowLogStore
31024
31852
  */
@@ -31033,8 +31861,6 @@ export declare class CreateFlowLogRequest extends $dara.Model {
31033
31861
  * * The name must start and end with a lowercase letter or a digit.
31034
31862
  * * The name must be 3 to 63 characters in length.
31035
31863
  *
31036
- * This parameter is required.
31037
- *
31038
31864
  * @example
31039
31865
  * FlowLogProject
31040
31866
  */
@@ -31722,7 +32548,7 @@ export declare class CreateHaVipRequest extends $dara.Model {
31722
32548
  * @remarks
31723
32549
  * The description of the HAVIP.
31724
32550
  *
31725
- * The description must be 1 to 256 characters in length and cannot start with `http://` or `https://`.
32551
+ * The description must be 1 to 255 characters in length and cannot start with `http://` or `https://`.
31726
32552
  *
31727
32553
  * @example
31728
32554
  * This is my HaVip.
@@ -32563,11 +33389,11 @@ export declare class CreateIpsecServerRequest extends $dara.Model {
32563
33389
  * @remarks
32564
33390
  * The pre-shared key.
32565
33391
  *
32566
- * The pre-shared key is used for identity authentication between the IPsec server and the client. The key must be 1 to 100 characters in length.
33392
+ * The pre-shared key that is used for authentication between the IPsec-VPN server and the client. It must be 1 to 100 characters in length.
32567
33393
  *
32568
- * If you do not specify a pre-shared key, the system randomly generates a 16-character string as the pre-shared key. You can call the [ListIpsecServers](https://help.aliyun.com/document_detail/2794120.html) operation to query the pre-shared keys that are generated by the system.
33394
+ * If you do not specify a pre-shared key, the system randomly generates a 16-bit string as the pre-shared key. You can call [ListIpsecServers](https://help.aliyun.com/document_detail/2794120.html) to query keys generated by the system.
32569
33395
  *
32570
- * > The pre-shared key of the IPsec server must be the same as the client key. Otherwise, the IPsec server cannot be connected to the client.
33396
+ * > The pre-shared key of the IPsec server key must be the same as that of the client. Otherwise, the connection between the IPsec server and the client cannot be established.
32571
33397
  *
32572
33398
  * @example
32573
33399
  * Cfd123****
@@ -32859,7 +33685,7 @@ export declare class CreateIpv6EgressOnlyRuleRequest extends $dara.Model {
32859
33685
  * @remarks
32860
33686
  * The description of the egress-only rule.
32861
33687
  *
32862
- * The description must be 2 to 256 characters in length and cannot start with `http://` or `https://`.
33688
+ * The description must be 0 to 256 characters in length and cannot start with `http://` or `https://`.
32863
33689
  *
32864
33690
  * @example
32865
33691
  * ruledescription
@@ -32899,7 +33725,7 @@ export declare class CreateIpv6EgressOnlyRuleRequest extends $dara.Model {
32899
33725
  * @remarks
32900
33726
  * The name of the egress-only rule.
32901
33727
  *
32902
- * The name must be 2 to 128 characters in length, and can contain letters, digits, underscores (_), and hyphens (-). The name must start with a letter but cannot start with `http://` or `https://`.
33728
+ * The name must be 0 to 128 characters in length and cannot start with `http://` or `https://`.
32903
33729
  *
32904
33730
  * @example
32905
33731
  * rulename
@@ -32994,7 +33820,7 @@ export declare class CreateIpv6GatewayRequest extends $dara.Model {
32994
33820
  * @remarks
32995
33821
  * The description of the IPv6 gateway.
32996
33822
  *
32997
- * The description must be 2 to 256 characters in length and cannot start with `http://` or `https://`.
33823
+ * The description must be 0 to 256 characters in length and cannot start with `http://` or `https://`.
32998
33824
  *
32999
33825
  * @example
33000
33826
  * ipv6gatewayforVPC1
@@ -33004,7 +33830,7 @@ export declare class CreateIpv6GatewayRequest extends $dara.Model {
33004
33830
  * @remarks
33005
33831
  * The name of the IPv6 gateway.
33006
33832
  *
33007
- * The name must be 2 to 128 characters in length, and can contain letters, digits, underscores (_), and hyphens (-). The name must start with a letter but cannot start with `http://` or `https://`.
33833
+ * The name must be 0 to 128 characters in length and cannot start with `http://` or `https://`.
33008
33834
  *
33009
33835
  * @example
33010
33836
  * ipv6GW
@@ -34567,7 +35393,7 @@ export declare class CreatePublicIpAddressPoolRequest extends $dara.Model {
34567
35393
  * @remarks
34568
35394
  * The description of the IP address pool.
34569
35395
  *
34570
- * This parameter is optional. The description must be 2 to 256 characters in length, and cannot start with http:// or https://.
35396
+ * The description must be 0 to 256 characters in length and cannot start with `http://` or `https://`.
34571
35397
  *
34572
35398
  * @example
34573
35399
  * AddressPoolDescription
@@ -34612,7 +35438,7 @@ export declare class CreatePublicIpAddressPoolRequest extends $dara.Model {
34612
35438
  * @remarks
34613
35439
  * The name of the IP address pool.
34614
35440
  *
34615
- * This parameter is optional. The name must be 1 to 128 characters in length and can contain digits, periods (.), underscores (_), and hyphens (-). The name must start with a letter but cannot start with `http://` or `https://`.
35441
+ * The name must be 0 to 128 characters in length and cannot start with `http://` or `https://`.
34616
35442
  *
34617
35443
  * @example
34618
35444
  * AddressPoolName
@@ -34669,6 +35495,13 @@ export declare class CreatePublicIpAddressPoolRequest extends $dara.Model {
34669
35495
  });
34670
35496
  }
34671
35497
  export declare class CreatePublicIpAddressPoolResponseBody extends $dara.Model {
35498
+ /**
35499
+ * @remarks
35500
+ * The ID of the IP address pool.
35501
+ *
35502
+ * @example
35503
+ * pippool-6wetvn6fumkgycssx****
35504
+ */
34672
35505
  publicIpAddressPoolId?: string;
34673
35506
  /**
34674
35507
  * @remarks
@@ -34884,7 +35717,7 @@ export declare class CreateRouteEntryRequest extends $dara.Model {
34884
35717
  * * **VpcPeer**: a VPC peering connection.
34885
35718
  * * **Ipv4Gateway**: an IPv4 gateway.
34886
35719
  * * **GatewayEndpoint**: a gateway endpoint.
34887
- * * **Ecr**: a Express Connect Router (ECR).
35720
+ * * **Ecr**: an Express Connect Router (ECR).
34888
35721
  *
34889
35722
  * @example
34890
35723
  * RouterInterface
@@ -35795,17 +36628,18 @@ export declare class CreateSslVpnServerRequest extends $dara.Model {
35795
36628
  * @remarks
35796
36629
  * The client CIDR block.
35797
36630
  *
35798
- * It is the CIDR block from which an IP address is allocated to the virtual network interface controller (NIC) of the client. It is not the private CIDR block of the client.
36631
+ * The CIDR block from which an IP address is allocated to the virtual network interface controller (NIC) of the client, rather than the private CIDR block.
35799
36632
  *
35800
- * If the client accesses the SSL server over an SSL-VPN connection, the VPN gateway assigns an IP address from the specified client CIDR block to the client. The client uses the assigned IP address to access cloud resources.
36633
+ * If the client accesses the SSL server over an SSL-VPN connection, the VPN gateway assigns an IP address from the specified client CIDR block for the client to access cloud resources.
35801
36634
  *
35802
36635
  * Make sure that the number of IP addresses in the client CIDR block is at least four times the maximum number of SSL-VPN connections supported by the VPN gateway.
35803
36636
  *
35804
36637
  * <details>
35805
36638
  * <summary>Click to view the reason.</summary>
35806
36639
  *
35807
- * For example, if you specify 192.168.0.0/24 as the client CIDR block, the system first divides a subnet CIDR block with a subnet mask of 30 from 192.168.0.0/24, such as 192.168.0.4/30. This subnet provides up to four IP addresses. Then, the system allocates an IP address from 192.168.0.4/30 to the client and uses the other three IP addresses to ensure network communication. In this case, one client consumes four IP addresses. Therefore, to ensure that an IP address is assigned to your client, you must make sure that the number of IP addresses in the client CIDR block is at least four times the maximum number of SSL-VPN connections supported by the VPN gateway with which the SSL server is associated.
36640
+ * For example, if you specify 192.168.0.0/24 as the client CIDR block, the system first divides a subnet CIDR block with a subnet mask of 30 from 192.168.0.0/24, such as 192.168.0.4/30. This subnet provides up to four IP addresses. Then, the system allocates an IP address from 192.168.0.4/30 to the client and uses the other three IP addresses to ensure network communication. In this case, one client consumes four IP addresses. Therefore, to ensure that an IP address is assigned to your client, the number of IP addresses in the client CIDR block must be at least four times the maximum number of SSL-VPN connections supported by the VPN gateway with which the SSL server is associated.
35808
36641
  * </details>
36642
+ *
35809
36643
  * <details>
35810
36644
  * <summary>Click to view the CIDR blocks that are not supported.</summary>
35811
36645
  *
@@ -35818,6 +36652,7 @@ export declare class CreateSslVpnServerRequest extends $dara.Model {
35818
36652
  * <details>
35819
36653
  * <summary>Click to view the recommended client CIDR blocks for different numbers of SSL-VPN connections.</summary>
35820
36654
  *
36655
+ *
35821
36656
  * * If the number of SSL-VPN connections is 5, we recommend that you specify a client CIDR block with a subnet mask that is less than or equal to 27 bits in length. Examples: 10.0.0.0/27 and 10.0.0.0/26.
35822
36657
  * * If the number of SSL-VPN connections is 10, we recommend that you specify a client CIDR block with a subnet mask that is less than or equal to 26 bits in length. Examples: 10.0.0.0/26 and 10.0.0.0/25.
35823
36658
  * * If the number of SSL-VPN connections is 20, we recommend that you specify a client CIDR block with a subnet mask that is less than or equal to 25 bits in length. Examples: 10.0.0.0/25 and 10.0.0.0/24.
@@ -35828,10 +36663,10 @@ export declare class CreateSslVpnServerRequest extends $dara.Model {
35828
36663
  * * If the number of SSL-VPN connections is 1,000, we recommend that you specify a client CIDR block with a subnet mask that is less than or equal to 20 bits in length. Examples: 10.0.0.0/20 and 10.0.0.0/19.
35829
36664
  * </details>
35830
36665
  *
35831
- * > - The subnet mask of the client CIDR block must be 16 to 29 bits in length.
36666
+ * > - The subnet mask of the client CIDR block must be 16 to 29 bits in length.
35832
36667
  * > - Make sure that the client CIDR block does not overlap with the local CIDR block, the VPC CIDR block, or route CIDR blocks associated with the client.
35833
- * > - We recommend that you use 10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16, or one of their subnets as the client CIDR block. If you want to specify a public CIDR block as the client CIDR block, you must specify the public CIDR block as the user CIDR block of the virtual private cloud (VPC). This way, the VPC can access the public CIDR block. For more information, see [VPC FAQ](https://help.aliyun.com/document_detail/185311.html).
35834
- * > - After you create an SSL server, the system automatically adds routes that point to the client CIDR block to the VPC route table. Do not add routes that point to the client CIDR block to the VPC route table again. Otherwise, SSL-VPN connections cannot work as expected.
36668
+ * > - We recommend that you use 10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16, or one of their subnets as the client CIDR block. If you want to specify a public CIDR block as the client CIDR block, you must specify the public CIDR block as the user CIDR block of the virtual private cloud (VPC). This way, the VPC can access the public CIDR block. For more information, see [VPC FAQs](https://help.aliyun.com/document_detail/185311.html).
36669
+ * > - After you create an SSL server, the system automatically adds routes that point to the client CIDR block to the VPC route table. Do not manually add routes that point to the client CIDR block. Otherwise, SSL-VPN connections cannot work as expected.
35835
36670
  *
35836
36671
  * This parameter is required.
35837
36672
  *
@@ -35908,7 +36743,7 @@ export declare class CreateSslVpnServerRequest extends $dara.Model {
35908
36743
  * @remarks
35909
36744
  * The local CIDR block.
35910
36745
  *
35911
- * It is the CIDR block that your client needs to access by using the SSL-VPN connection.
36746
+ * The CIDR block that your client needs to access by using the SSL-VPN connection.
35912
36747
  *
35913
36748
  * This value can be the CIDR block of a VPC, a vSwitch, a data center that is connected to a VPC by using an Express Connect circuit, or an Alibaba Cloud service such as Object Storage Service (OSS).
35914
36749
  *
@@ -37044,7 +37879,7 @@ export declare class CreateVcoRouteEntryRequest extends $dara.Model {
37044
37879
  ownerAccount?: string;
37045
37880
  /**
37046
37881
  * @remarks
37047
- * The ID of the region where the IPsec-VPN connection is established.
37882
+ * The region ID of the IPsec-VPN connection.
37048
37883
  *
37049
37884
  * You can call the [DescribeRegions](https://help.aliyun.com/document_detail/36063.html) operation to query the most recent region list.
37050
37885
  *
@@ -38344,22 +39179,24 @@ export declare class CreateVpnAttachmentRequest extends $dara.Model {
38344
39179
  autoConfigRoute?: boolean;
38345
39180
  /**
38346
39181
  * @remarks
38347
- * The Border Gateway Protocol (BGP) configurations:
39182
+ * This parameter is supported when you create an IPsec-VPN connection in single-tunnel mode.
38348
39183
  *
38349
- * * **BgpConfig.EnableBgp**: specifies whether to enable BGP. Valid values: **true** and **false**. Default value: false.
39184
+ * BGP configuration:
39185
+ *
39186
+ * * **BgpConfig.EnableBgp**: specifies whether to enable BGP. Valid values: **true** and **false** (default).
38350
39187
  *
38351
39188
  * * **BgpConfig.LocalAsn**: the ASN on the Alibaba Cloud side. Valid values: **1** to **4294967295**. Default value: **45104**.
38352
39189
  *
38353
- * You can enter the ASN in two segments. Separate the first 16 bits of the ASN from the remaining 16 bits with a period (.). Enter the number in each segment in decimal format.
39190
+ * You can enter a value in two segments separated by a period (.). Each segment is 16 bits in length. Enter the number in each segment in decimal format.
38354
39191
  *
38355
- * For example, if you enter 123.456, the ASN is: 123 × 65536 + 456 = 8061384.
39192
+ * For example, if you enter 123.456, the ASN is 8061384. The ASN is calculated by using the following formula: 123 × 65536 + 456 = 8061384.
38356
39193
  *
38357
- * * **BgpConfig.TunnelCidr**: the CIDR block of the IPsec tunnel. The CIDR block falls within 169.254.0.0/16. The subnet mask of the CIDR block must be 30 bits in length.
39194
+ * * **BgpConfig.TunnelCidr**: The CIDR block of the IPsec tunnel. The CIDR block must fall into 169.254.0.0/16 and the mask of the CIDR block must be 30 bits in length. The CIDR block cannot be 169.254.0.0/30, 169.254.1.0/30, 169.254.2.0/30, 169.254.3.0/30, 169.254.4.0/30, 169.254.5.0/30, 169.254.6.0/30, or 169.254.169.252/30.
38358
39195
  *
38359
- * * **LocalBgpIp:** the BGP IP address on the Alibaba Cloud side. This IP address must fall within the CIDR block range of the IPsec tunnel.
39196
+ * * **LocalBgpIp**: the BGP address on the Alibaba Cloud side. It must be an IP address that falls within the CIDR block of the IPsec tunnel.
38360
39197
  *
38361
- * > * Before you configure BGP, we recommend that you learn about how BGP works and the limits. For more information, see [BGP dynamic routing ](https://help.aliyun.com/document_detail/170235.html).
38362
- * > * We recommend that you use a private ASN to establish a connection with Alibaba Cloud over BGP. Refer to the relevant documentation for the private ASN range.
39198
+ * > - Before you add BGP configurations, we recommend that you learn about how BGP works and the limits. For more information, see [Configure BGP dynamic routing](https://help.aliyun.com/document_detail/445767.html).
39199
+ * > - We recommend that you use a private ASN to establish BGP connections to Alibaba Cloud. Refer to the relevant documentation for the private ASN range.
38363
39200
  *
38364
39201
  * @example
38365
39202
  * {"EnableBgp":"true","LocalAsn":"45104","TunnelCidr":"169.254.11.0/30","LocalBgpIp":"169.254.11.1"}
@@ -38381,6 +39218,8 @@ export declare class CreateVpnAttachmentRequest extends $dara.Model {
38381
39218
  * @remarks
38382
39219
  * The customer gateway ID.
38383
39220
  *
39221
+ * > This parameter is required only when you create a single-tunnel IPsec-VPN connection.
39222
+ *
38384
39223
  * @example
38385
39224
  * cgw-p0w2jemrcj5u61un8****
38386
39225
  */
@@ -38398,10 +39237,12 @@ export declare class CreateVpnAttachmentRequest extends $dara.Model {
38398
39237
  effectImmediately?: boolean;
38399
39238
  /**
38400
39239
  * @remarks
38401
- * Specifies whether to enable the dead peer detection (DPD) feature. Valid values:
39240
+ * This parameter is supported if you create an IPsec-VPN connection in single-tunnel mode.
38402
39241
  *
38403
- * * **true** (default) The initiator of the IPsec-VPN connection sends DPD packets to verify the existence and availability of the peer. If no response is received from the peer within a specified period of time, the connection fails. ISAKMP SAs and IPsec SAs are deleted. The IPsec tunnel is also deleted.
38404
- * * **false**
39242
+ * Specifies whether to enable DPD. Valid values: Valid values:
39243
+ *
39244
+ * * **true** (default): enables DPD. The initiator of the IPsec-VPN connection sends DPD packets to check the existence and availability of the peer. If no feedback is received from the peer within the specified period of time, the connection fails. In this case, ISAKMP SA and IPsec SA are deleted along with the security tunnel.
39245
+ * * **false**: disables DPD. The initiator of the IPsec-VPN connection does not send DPD packets.
38405
39246
  *
38406
39247
  * @example
38407
39248
  * true
@@ -38409,25 +39250,40 @@ export declare class CreateVpnAttachmentRequest extends $dara.Model {
38409
39250
  enableDpd?: boolean;
38410
39251
  /**
38411
39252
  * @remarks
39253
+ * This parameter is supported if you create an IPsec-VPN connection in single-tunnel mode.
39254
+ *
38412
39255
  * Specifies whether to enable NAT traversal. Valid values:
38413
39256
  *
38414
- * * **true** (default) After NAT traversal is enabled, the initiator does not check the UDP ports during IKE negotiations and can automatically discover NAT gateway devices along the VPN tunnel.
38415
- * * **false**
39257
+ * * **true** (default): enables NAT traversal. After NAT traversal is enabled, the initiator does not check the UDP ports during IKE negotiations and can automatically discover NAT gateway devices along the IPsec-VPN tunnel.
39258
+ * * **false**: disables NAT traversal.
38416
39259
  *
38417
39260
  * @example
38418
39261
  * true
38419
39262
  */
38420
39263
  enableNatTraversal?: boolean;
39264
+ /**
39265
+ * @remarks
39266
+ * This parameter is available if you create an IPsec-VPN connection in dual-tunnel mode.
39267
+ *
39268
+ * Specifies whether to enable the BGP feature for the tunnel. Valid values: **true** and **false**. Default value: false.
39269
+ *
39270
+ * > Before you add BGP configurations, we recommend that you learn about how BGP works and the limits. For more information, see [Configure BGP dynamic routing](https://help.aliyun.com/document_detail/445767.html)
39271
+ *
39272
+ * @example
39273
+ * false
39274
+ */
38421
39275
  enableTunnelsBgp?: boolean;
38422
39276
  /**
38423
39277
  * @remarks
38424
- * The health check configuration:
39278
+ * This parameter is supported if you create an IPsec-VPN connection in single-tunnel mode.
38425
39279
  *
38426
- * * **HealthCheckConfig.enable**: specifies whether to enable health checks. Valid values: **true** and **false**. Default value: false.
39280
+ * The health check configurations:
39281
+ *
39282
+ * * **HealthCheckConfig.enable**: indicates whether the health check is enabled. Valid values: **true** and **false** (default).
38427
39283
  *
38428
- * * **HealthCheckConfig.dip**: the destination IP address configured for health checks. Enter the IP address on the data center side that the VPC can communicate with through the IPsec-VPN connection.
39284
+ * * **HealthCheckConfig.dip**: the destination IP address configured for health checks. Enter the IP address of the on-premises data center that the VPC can access through the IPsec connection.
38429
39285
  *
38430
- * * **HealthCheckConfig.sip**: the source IP address configured for health checks. Enter the IP address on the VPC side that the data center can communicate with through the IPsec-VPN connection.
39286
+ * * **HealthCheckConfig.sip**: the source IP address configured for health checks. Enter the IP address of the VPC that the on-premises data center can access through the IPsec connection.
38431
39287
  *
38432
39288
  * * **HealthCheckConfig.interval**: the time interval of health check retries. Unit: seconds. Default value: **3**.
38433
39289
  *
@@ -38444,11 +39300,13 @@ export declare class CreateVpnAttachmentRequest extends $dara.Model {
38444
39300
  healthCheckConfig?: string;
38445
39301
  /**
38446
39302
  * @remarks
39303
+ * This parameter is supported if you create an IPsec-VPN connection in single-tunnel mode.
39304
+ *
38447
39305
  * The configurations of Phase 1 negotiations:
38448
39306
  *
38449
39307
  * * **IkeConfig.Psk**: the pre-shared key that is used for identity authentication between the VPN gateway and the on-premises data center.
38450
39308
  *
38451
- * * The key must be 1 to 100 characters in length and can contain digits, letters, and the following special characters: ``~!`@#$%^&*()_-+={}[]|;:\\",.<>/?``
39309
+ * * The key cannot contain space characters. The key must be 1 to 100 characters in length, and can contain digits, letters, and the following special characters: ``~!`@#$%^&*()_-+={}[]|;:\\",.<>/?``
38452
39310
  * * If you do not specify a pre-shared key, the system randomly generates a 16-bit string as the pre-shared key. You can call the [DescribeVpnConnection](https://help.aliyun.com/document_detail/2526951.html) operation to query the pre-shared key that is automatically generated by the system.
38453
39311
  *
38454
39312
  * > The pre-shared key of the IPsec-VPN connection must be the same as the authentication key of the on-premises data center. Otherwise, connections between the on-premises data center and the VPN gateway cannot be established.
@@ -38465,9 +39323,9 @@ export declare class CreateVpnAttachmentRequest extends $dara.Model {
38465
39323
  *
38466
39324
  * * **IkeConfig.IkeLifetime**: the SA lifetime as a result of Phase 1 negotiations. Unit: seconds. Valid values: **0** to **86400**. Default value: **86400**.
38467
39325
  *
38468
- * * **IkeConfig.LocalIdIPsec**: the identifier on the Alibaba Cloud side. The identifier cannot exceed 100 characters in length. This parameter is left empty by default.
39326
+ * * **IkeConfig.LocalId**: the identifier on the Alibaba Cloud side. The identifier cannot exceed 100 characters in length and cannot contain space characters. This parameter is empty by default.
38469
39327
  *
38470
- * * **IkeConfig.RemoteId**: the identifier on the data center side. The identifier cannot exceed 100 characters in length. The default value is the IP address of the customer gateway.
39328
+ * * **IkeConfig.RemoteId**: the identifier on the data center side. The identifier cannot exceed 100 characters in length and cannot contain space characters. The default value is the IP address of the customer gateway.
38471
39329
  *
38472
39330
  * @example
38473
39331
  * {"Psk":"1234****","IkeVersion":"ikev1","IkeMode":"main","IkeEncAlg":"aes","IkeAuthAlg":"sha1","IkePfs":"group2","IkeLifetime":86400,"LocalId":"47.XX.XX.1","RemoteId":"47.XX.XX.2"}
@@ -38475,12 +39333,14 @@ export declare class CreateVpnAttachmentRequest extends $dara.Model {
38475
39333
  ikeConfig?: string;
38476
39334
  /**
38477
39335
  * @remarks
39336
+ * This parameter is supported if you create an IPsec-VPN connection in single-tunnel mode.
39337
+ *
38478
39338
  * The configurations of Phase 2 negotiations:
38479
39339
  *
38480
39340
  * * **IpsecConfig.IpsecEncAlg**: the encryption algorithm that is used in Phase 2 negotiations. Valid values: **aes**, **aes192**, **aes256**, **des**, and **3des**. Default value: **aes**.
38481
39341
  * * **IpsecConfig. IpsecAuthAlg**: the authentication algorithm that is used in Phase 2 negotiations. Valid values: **md5**, **sha1**, **sha256**, **sha384**, and **sha512**. Default value: **md5**.
38482
- * * **IpsecConfig. IpsecPfs**: the Diffie-Hellman key exchange algorithm that is used in Phase 2 negotiations. Valid values: **disabled**, **group1**, **group2**, **group5**, and **group14**. Default value: **group2**.
38483
- * * **IpsecConfig. IpsecLifetime**: the SA lifetime that is determined by Phase 2 negotiations. Unit: seconds. Valid values: **0** to **86400**. Default value: **86400**.
39342
+ * * **IpsecConfig. IpsecPfs**: The Diffie-Hellman key exchange algorithm used in the second phase negotiation. Valid values: **disabled**, **group1**, **group2**, **group5**, and **group14**. Default value: **group2**.
39343
+ * * **IkeConfig.IkeLifetime**: the SA lifetime determined by Phase 2 negotiations. Unit: seconds. Valid values: **0** to **86400**. Default value: **86400**.
38484
39344
  *
38485
39345
  * @example
38486
39346
  * {"IpsecEncAlg":"aes","IpsecAuthAlg":"sha1","IpsecPfs":"group2","IpsecLifetime":86400}
@@ -38585,6 +39445,12 @@ export declare class CreateVpnAttachmentRequest extends $dara.Model {
38585
39445
  */
38586
39446
  tags?: CreateVpnAttachmentRequestTags[];
38587
39447
  /**
39448
+ * @remarks
39449
+ * The tunnel configurations.
39450
+ *
39451
+ * * You can specify parameters in the **TunnelOptionsSpecification** array when you create an IPsec-VPN connection in dual tunnel mode.
39452
+ * * When you create a IPsec-VPN connection in dual-tunnel mode, you must add both tunnels to IPsec-VPN connection to ensure that the IPsec-VPN connection has connection redundancy. Each IPsec-VPN connection supports only two tunnels.
39453
+ *
38588
39454
  * **if can be null:**
38589
39455
  * true
38590
39456
  */
@@ -38704,7 +39570,7 @@ export declare class CreateVpnConnectionRequest extends $dara.Model {
38704
39570
  autoConfigRoute?: boolean;
38705
39571
  /**
38706
39572
  * @remarks
38707
- * This parameter is supported when you create an IPsec-VPN connection in single-tunnel mode.
39573
+ * This parameter is supported if you create an IPsec-VPN connection in single-tunnel mode.
38708
39574
  *
38709
39575
  * BGP configuration:
38710
39576
  *
@@ -38716,14 +39582,14 @@ export declare class CreateVpnConnectionRequest extends $dara.Model {
38716
39582
  *
38717
39583
  * For example, if you enter 123.456, the ASN is 8061384. The ASN is calculated by using the following formula: 123 × 65536 + 456 = 8061384.
38718
39584
  *
38719
- * * **BgpConfig.TunnelCidr**: The CIDR block of the IPsec tunnel. The CIDR block must belong to 169.254.0.0/16 and the subnet mask is 30 bits in length.
39585
+ * * **BgpConfig.TunnelCidr**: The CIDR block of the IPsec tunnel. The CIDR block must fall within 169.254.0.0/16 and the mask of the CIDR block must be 30 bits in length. The CIDR block cannot be 169.254.0.0/30, 169.254.1.0/30, 169.254.2.0/30, 169.254.3.0/30, 169.254.4.0/30, 169.254.5.0/30, 169.254.6.0/30, or 169.254.169.252/30.
38720
39586
  *
38721
- * >The CIDR block of the IPsec tunnel for each IPsec-VPN connection on a VPN gateway must be unique.
39587
+ * > The CIDR block of the IPsec tunnel for each IPsec-VPN connection on a VPN gateway must be unique.
38722
39588
  *
38723
39589
  * * **LocalBgpIp**: the BGP address on the Alibaba Cloud side. It must be an IP address that falls within the CIDR block of the IPsec tunnel.
38724
39590
  *
38725
- * > * Before you add BGP configurations, we recommend that you learn about how BGP works and the limits. For more information, see [VPN Gateway supports BGP dynamic routing](https://help.aliyun.com/document_detail/170235.html).
38726
- * > * We recommend that you use private ASN to establish BGP connections to Alibaba Cloud. Refer to the relevant documentation for the private ASN range.
39591
+ * > - Before you add BGP configurations, we recommend that you learn about how BGP works and the limits. For more information, see [Configure BGP dynamic routing](https://help.aliyun.com/document_detail/2638220.html).
39592
+ * > - We recommend that you use a private ASN to establish BGP connections to Alibaba Cloud. Refer to the relevant documentation for the private ASN range.
38727
39593
  *
38728
39594
  * @example
38729
39595
  * {"EnableBgp":"true","LocalAsn":"45104","TunnelCidr":"169.254.11.0/30","LocalBgpIp":"169.254.11.1"}
@@ -38822,13 +39688,11 @@ export declare class CreateVpnConnectionRequest extends $dara.Model {
38822
39688
  *
38823
39689
  * * **IkeConfig.Psk**: the pre-shared key that is used for identity authentication between the VPN gateway and the on-premises data center.
38824
39690
  *
38825
- * * The key must be 1 to 100 characters in length and can contain digits, letters, and the following special characters: ``~!\\`@#$%^&*()_-+={}[]|;:\\",.<>/?``
39691
+ * * The key cannot contain spaces. The key must be 1 to 100 characters in length, and can contain digits, letters, and the following special characters: ``~!\\`@#$%^&*()_-+={}[]|;:\\",.<>/?``
38826
39692
  *
38827
39693
  * * If you do not specify a pre-shared key, the system randomly generates a 16-bit string as the pre-shared key. You can call the [DescribeVpnConnection](https://help.aliyun.com/document_detail/2526951.html) operation to query the pre-shared key that is automatically generated by the system.
38828
39694
  *
38829
- * **
38830
- *
38831
- * **Note** The pre-shared key of the IPsec-VPN connection must be the same as the authentication key of the on-premises data center. Otherwise, connections between the on-premises data center and the VPN gateway cannot be established.
39695
+ * > The pre-shared key of the IPsec-VPN connection must be the same as the authentication key of the on-premises data center. Otherwise, connections between the on-premises data center and the VPN gateway cannot be established.
38832
39696
  *
38833
39697
  * * **IkeConfig.IkeVersion**: the version of the Internet Key Exchange (IKE) protocol. Valid values: **ikev1** and **ikev2**. Default value: **ikev1**.
38834
39698
  *
@@ -38837,7 +39701,7 @@ export declare class CreateVpnConnectionRequest extends $dara.Model {
38837
39701
  * * **IkeConfig.IkeMode**: the negotiation mode of IKE. Valid values: **main** and **aggressive**. Default value: **main**.
38838
39702
  *
38839
39703
  * * **main:** This mode offers higher security during negotiations.
38840
- * * **aggressive**: This mode supports faster negotiations and a higher success rate.
39704
+ * * **aggressive:** This mode is faster and has a higher success rate.
38841
39705
  *
38842
39706
  * * **IkeConfig.IkeEncAlg**: the encryption algorithm that is used in Phase 1 negotiations.
38843
39707
  *
@@ -38849,11 +39713,11 @@ export declare class CreateVpnConnectionRequest extends $dara.Model {
38849
39713
  *
38850
39714
  * * **IkeConfig.IkePfs**: the Diffie-Hellman key exchange algorithm that is used in Phase 1 negotiations. Valid values: **group1**, **group2**, **group5**, and **group14**. Default value: **group2**.
38851
39715
  *
38852
- * * **IkeConfig.IkeLifetime**: the SA lifetime as a result of Phase 1 negotiations. Unit: seconds. Valid values: **0** to **86400**. Default value: **86400**.
39716
+ * * **IkeConfig.IkeLifetime**: the SA lifetime as a result of Phase 1 negotiations. Unit: seconds Valid values: **0** to **86400**. Default value: **86400**.
38853
39717
  *
38854
- * * **IkeConfig.LocalId**: the identifier of the VPN gateway. It can contain at most 100 characters. The default value is the IP address of the VPN gateway.
39718
+ * * **IkeConfig.LocalId**: the identifier of the VPN gateway. It can be up to 100 characters in length and cannot contain space characters. The default value is the IP address of the VPN gateway.
38855
39719
  *
38856
- * * **IkeConfig.RemoteId**: the identifier of the customer gateway. It can contain at most 100 characters. The default value is the IP address of the customer gateway.
39720
+ * * **IkeConfig.RemoteId**: the identifier of the customer gateway. It can be up to 100 characters in length and cannot contain space characters. The default value is the IP address of the customer gateway.
38857
39721
  *
38858
39722
  * @example
38859
39723
  * {"Psk":"1234****","IkeVersion":"ikev1","IkeMode":"main","IkeEncAlg":"aes","IkeAuthAlg":"sha1","IkePfs":"group2","IkeLifetime":86400,"LocalId":"47.XX.XX.1","RemoteId":"47.XX.XX.2"}
@@ -41849,7 +42713,28 @@ export declare class DeleteIpv6EgressOnlyRuleResponse extends $dara.Model {
41849
42713
  });
41850
42714
  }
41851
42715
  export declare class DeleteIpv6GatewayRequest extends $dara.Model {
42716
+ /**
42717
+ * @remarks
42718
+ * The client token that is used to ensure the idempotence of the request.
42719
+ *
42720
+ * You can use the client to generate the token, but you must make sure that the token is unique among different requests. The client token can contain only ASCII characters.
42721
+ *
42722
+ * > If you do not specify this parameter, the system automatically uses the **request ID** as the **client token**. The **request ID** may be different for each request.
42723
+ *
42724
+ * @example
42725
+ * 123e4567-e89b-12d3-a456-426655440000
42726
+ */
41852
42727
  clientToken?: string;
42728
+ /**
42729
+ * @remarks
42730
+ * Specifies whether to perform only a dry run, without performing the actual request. Valid values:
42731
+ *
42732
+ * * **true**: performs only a dry run. The system checks the request for potential issues, including missing parameter values, incorrect request syntax, and service limits. If the request fails the dry run, an error message is returned. If the request passes the dry run, the `DryRunOperation` error code is returned.
42733
+ * * **false** (default): performs a dry run and performs the actual request. If the request passes the dry run, a 2xx HTTP status code is returned and the operation is performed.
42734
+ *
42735
+ * @example
42736
+ * false
42737
+ */
41853
42738
  dryRun?: boolean;
41854
42739
  /**
41855
42740
  * @remarks
@@ -41924,7 +42809,24 @@ export declare class DeleteIpv6GatewayResponse extends $dara.Model {
41924
42809
  });
41925
42810
  }
41926
42811
  export declare class DeleteIpv6InternetBandwidthRequest extends $dara.Model {
42812
+ /**
42813
+ * @remarks
42814
+ * The client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but you must make sure that the token is unique among different requests. The client token can contain only ASCII characters. If you do not specify this parameter, the system automatically uses the request ID as the client token. The request ID may be different for each request.
42815
+ *
42816
+ * @example
42817
+ * 123e4567-e89b-12d3-a456-426655440000
42818
+ */
41927
42819
  clientToken?: string;
42820
+ /**
42821
+ * @remarks
42822
+ * Specifies whether to perform only a dry run, without performing the actual request. Valid values:
42823
+ *
42824
+ * * **true**: performs only a dry run. The system checks the request for potential issues, including missing parameter values, incorrect request syntax, and service limits. If the request fails the dry run, an error message is returned. If the request passes the dry run, the `DryRunOperation` error code is returned.
42825
+ * * **false** (default): performs a dry run and performs the actual request. If the request passes the dry run, a 2xx HTTP status code is returned and the operation is performed.
42826
+ *
42827
+ * @example
42828
+ * true
42829
+ */
41928
42830
  dryRun?: boolean;
41929
42831
  /**
41930
42832
  * @remarks
@@ -43888,7 +44790,7 @@ export declare class DeleteVcoRouteEntryRequest extends $dara.Model {
43888
44790
  ownerAccount?: string;
43889
44791
  /**
43890
44792
  * @remarks
43891
- * The ID of the region where the IPsec-VPN connection is established.
44793
+ * The region ID of the IPsec-VPN connection.
43892
44794
  *
43893
44795
  * You can call the [DescribeRegions](https://help.aliyun.com/document_detail/36063.html) operation to query the most recent region list.
43894
44796
  *
@@ -45918,7 +46820,7 @@ export declare class DescribeCustomerGatewayResponseBody extends $dara.Model {
45918
46820
  description?: string;
45919
46821
  /**
45920
46822
  * @remarks
45921
- * The public IP address of the gateway device in the data center.
46823
+ * The IP address of the gateway device in the data center.
45922
46824
  *
45923
46825
  * @example
45924
46826
  * 139.32.XX.XX
@@ -46453,6 +47355,18 @@ export declare class DescribeEipAddressesRequest extends $dara.Model {
46453
47355
  * eipsg-t4nr90yik5oy38xdy****
46454
47356
  */
46455
47357
  segmentInstanceId?: string;
47358
+ /**
47359
+ * @remarks
47360
+ * Indicates whether the instance is managed. Valid values:
47361
+ *
47362
+ * * **true**: yes
47363
+ * * **false**: no.
47364
+ *
47365
+ * If you do not specify this parameter, all instances are queried.
47366
+ *
47367
+ * @example
47368
+ * false
47369
+ */
46456
47370
  serviceManaged?: boolean;
46457
47371
  /**
46458
47372
  * @remarks
@@ -46487,7 +47401,7 @@ export declare class DescribeEipAddressesRequest extends $dara.Model {
46487
47401
  export declare class DescribeEipAddressesResponseBody extends $dara.Model {
46488
47402
  /**
46489
47403
  * @remarks
46490
- * The details about the EIPs.
47404
+ * Details of the EIPs.
46491
47405
  */
46492
47406
  eipAddresses?: DescribeEipAddressesResponseBodyEipAddresses;
46493
47407
  /**
@@ -49411,9 +50325,10 @@ export declare class DescribeIpv6EgressOnlyRulesRequest extends $dara.Model {
49411
50325
  instanceId?: string;
49412
50326
  /**
49413
50327
  * @remarks
49414
- * The type of the instance to which you want to apply the egress-only rule. Set the value to
50328
+ * The type of the instance to which you want to apply the egress-only rule. Valid values:
49415
50329
  *
49416
- * **Ipv6Address**, which specifies that the egress-only rule applies to an IPv6 address.
50330
+ * * IPv6Address (default)
50331
+ * * IPv6Prefix
49417
50332
  *
49418
50333
  * @example
49419
50334
  * Ipv6Address
@@ -49449,7 +50364,7 @@ export declare class DescribeIpv6EgressOnlyRulesRequest extends $dara.Model {
49449
50364
  ownerId?: number;
49450
50365
  /**
49451
50366
  * @remarks
49452
- * The number of the page to return. Default value: **1**.
50367
+ * The page number. Default value: **1**.
49453
50368
  *
49454
50369
  * @example
49455
50370
  * 1
@@ -49457,7 +50372,7 @@ export declare class DescribeIpv6EgressOnlyRulesRequest extends $dara.Model {
49457
50372
  pageNumber?: number;
49458
50373
  /**
49459
50374
  * @remarks
49460
- * The number of entries to return on each page. Maximum value: **50**. Default value: **10**.
50375
+ * The number of entries per page. Maximum value: **50**. Default value: **10**.
49461
50376
  *
49462
50377
  * @example
49463
50378
  * 10
@@ -50716,6 +51631,16 @@ export declare class DescribePhysicalConnectionsResponse extends $dara.Model {
50716
51631
  });
50717
51632
  }
50718
51633
  export declare class DescribePublicIpAddressRequest extends $dara.Model {
51634
+ /**
51635
+ * @remarks
51636
+ * The IP version. Valid values:
51637
+ *
51638
+ * * **IPv4** (default)
51639
+ * * **IPv6**
51640
+ *
51641
+ * @example
51642
+ * ipv4
51643
+ */
50719
51644
  ipVersion?: string;
50720
51645
  ownerAccount?: string;
50721
51646
  ownerId?: number;
@@ -51151,9 +52076,7 @@ export declare class DescribeRouteTableListRequest extends $dara.Model {
51151
52076
  ownerId?: number;
51152
52077
  /**
51153
52078
  * @remarks
51154
- * The value of tag N to add to the resource. You can specify up to 20 tag values. The tag value can be an empty string.
51155
- *
51156
- * The tag value can be up to 128 characters in length. It cannot start with `aliyun` or `acs:` and cannot contain `http://` or `https://`.
52079
+ * The number of the returned page. Default value: **1**.
51157
52080
  *
51158
52081
  * @example
51159
52082
  * 1
@@ -51161,10 +52084,7 @@ export declare class DescribeRouteTableListRequest extends $dara.Model {
51161
52084
  pageNumber?: number;
51162
52085
  /**
51163
52086
  * @remarks
51164
- * The type of the route table.
51165
- *
51166
- * * **System**
51167
- * * **Custom**
52087
+ * The number of entries per page. Maximum value: **50**. Default value: **10**.
51168
52088
  *
51169
52089
  * @example
51170
52090
  * 10
@@ -51172,7 +52092,9 @@ export declare class DescribeRouteTableListRequest extends $dara.Model {
51172
52092
  pageSize?: number;
51173
52093
  /**
51174
52094
  * @remarks
51175
- * The number of entries per page.
52095
+ * The region ID of the VPC to which the route table belongs.
52096
+ *
52097
+ * You can call [DescribeRegions](https://www.alibabacloud.com/help/vpc/developer-reference/api-vpc-2016-04-28-describeregions) to query the most recent region list.
51176
52098
  *
51177
52099
  * This parameter is required.
51178
52100
  *
@@ -51182,7 +52104,7 @@ export declare class DescribeRouteTableListRequest extends $dara.Model {
51182
52104
  regionId?: string;
51183
52105
  /**
51184
52106
  * @remarks
51185
- * The details of the route table.
52107
+ * The ID of the resource group to which the route table belongs.
51186
52108
  *
51187
52109
  * @example
51188
52110
  * rg-acfmxazb4ph****
@@ -51192,7 +52114,7 @@ export declare class DescribeRouteTableListRequest extends $dara.Model {
51192
52114
  resourceOwnerId?: number;
51193
52115
  /**
51194
52116
  * @remarks
51195
- * The tags.
52117
+ * The ID of the route table.
51196
52118
  *
51197
52119
  * @example
51198
52120
  * vtb-bp145q7glnuzdvzu2****
@@ -51200,9 +52122,7 @@ export declare class DescribeRouteTableListRequest extends $dara.Model {
51200
52122
  routeTableId?: string;
51201
52123
  /**
51202
52124
  * @remarks
51203
- * The key of tag N to add to the resource. You can specify up to 20 tag keys. The tag key cannot be an empty string.
51204
- *
51205
- * The tag key can be up to 128 characters in length. It cannot start with `aliyun` or `acs:`, and cannot contain `http://` or `https://`.
52125
+ * The name of the route table.
51206
52126
  *
51207
52127
  * @example
51208
52128
  * doctest
@@ -51210,7 +52130,10 @@ export declare class DescribeRouteTableListRequest extends $dara.Model {
51210
52130
  routeTableName?: string;
51211
52131
  /**
51212
52132
  * @remarks
51213
- * The time when the route table was created.
52133
+ * The type of the route table.
52134
+ *
52135
+ * * **System**
52136
+ * * **Custom**
51214
52137
  *
51215
52138
  * @example
51216
52139
  * System
@@ -51218,9 +52141,7 @@ export declare class DescribeRouteTableListRequest extends $dara.Model {
51218
52141
  routeTableType?: string;
51219
52142
  /**
51220
52143
  * @remarks
51221
- * The region ID of the VPC to which the route table belongs.
51222
- *
51223
- * You can call the [DescribeRegions](https://help.aliyun.com/document_detail/36063.html) operation to query the most recent region list.
52144
+ * The ID of vRouter to which the route table belongs.
51224
52145
  *
51225
52146
  * @example
51226
52147
  * vrt-bp1lhl0taikrteen8****
@@ -51228,7 +52149,10 @@ export declare class DescribeRouteTableListRequest extends $dara.Model {
51228
52149
  routerId?: string;
51229
52150
  /**
51230
52151
  * @remarks
51231
- * The ID of the resource group to which the route table to be queried belongs.
52152
+ * The type of the router to which the route table belongs. Valid value:
52153
+ *
52154
+ * * **VRouter** (default): a vRouter
52155
+ * * **VBR**: a VBR
51232
52156
  *
51233
52157
  * @example
51234
52158
  * VRouter
@@ -51236,12 +52160,14 @@ export declare class DescribeRouteTableListRequest extends $dara.Model {
51236
52160
  routerType?: string;
51237
52161
  /**
51238
52162
  * @remarks
51239
- * The page number.
52163
+ * The tags of the resource.
51240
52164
  */
51241
52165
  tag?: DescribeRouteTableListRequestTag[];
51242
52166
  /**
51243
52167
  * @remarks
51244
- * The tags of the resource.
52168
+ * The ID of the VPC to which the route table belongs.
52169
+ *
52170
+ * When this parameter is set, the value of **RouterType** is automatically assigned to **VRouter**.
51245
52171
  *
51246
52172
  * @example
51247
52173
  * vpc-bp15zckdt37pq72****
@@ -51261,7 +52187,7 @@ export declare class DescribeRouteTableListRequest extends $dara.Model {
51261
52187
  export declare class DescribeRouteTableListResponseBody extends $dara.Model {
51262
52188
  /**
51263
52189
  * @remarks
51264
- * The ID of the route table.
52190
+ * The page number.
51265
52191
  *
51266
52192
  * @example
51267
52193
  * 1
@@ -51269,10 +52195,7 @@ export declare class DescribeRouteTableListResponseBody extends $dara.Model {
51269
52195
  pageNumber?: number;
51270
52196
  /**
51271
52197
  * @remarks
51272
- * The type of the cloud resource with which the route table is associated. Valid values:
51273
- *
51274
- * * **VSwitch**: vSwitch
51275
- * * **Gateway**: IPv4 gateway
52198
+ * The number of entries per page.
51276
52199
  *
51277
52200
  * @example
51278
52201
  * 10
@@ -51280,7 +52203,7 @@ export declare class DescribeRouteTableListResponseBody extends $dara.Model {
51280
52203
  pageSize?: number;
51281
52204
  /**
51282
52205
  * @remarks
51283
- * The ID of the vRouter to which the route table belongs.
52206
+ * The request ID.
51284
52207
  *
51285
52208
  * @example
51286
52209
  * DC668356-BCB4-42FD-9BC3-FA2B2E04B634
@@ -51288,12 +52211,12 @@ export declare class DescribeRouteTableListResponseBody extends $dara.Model {
51288
52211
  requestId?: string;
51289
52212
  /**
51290
52213
  * @remarks
51291
- * The description of the route table.
52214
+ * The detailed information about the route tables.
51292
52215
  */
51293
52216
  routerTableList?: DescribeRouteTableListResponseBodyRouterTableList;
51294
52217
  /**
51295
52218
  * @remarks
51296
- * The ID of the Alibaba Cloud account to which the route table belongs.
52219
+ * The total number of entries returned.
51297
52220
  *
51298
52221
  * @example
51299
52222
  * 1
@@ -52649,8 +53572,7 @@ export declare class DescribeSslVpnClientCertsRequest extends $dara.Model {
52649
53572
  * @remarks
52650
53573
  * The ID of the resource group to which the SSL client certificate belongs.
52651
53574
  *
52652
- * The SSL client certificate is the same as the resource group of the SSL server associated with it.
52653
- * You can call the [DescribeSslVpnServers](https://help.aliyun.com/document_detail/2794078.html) operation to query the ID of the resource group to which the SSL server belongs.
53575
+ * The SSL client certificate and its associated SSL server belong to the same resource group. You can call the [DescribeSslVpnServers](https://help.aliyun.com/document_detail/2794078.html) operation to query the ID of the resource group to which the SSL server belongs.
52654
53576
  *
52655
53577
  * @example
52656
53578
  * rg-acfmzs372yg****
@@ -52930,11 +53852,9 @@ export declare class DescribeSslVpnServersRequest extends $dara.Model {
52930
53852
  regionId?: string;
52931
53853
  /**
52932
53854
  * @remarks
52933
- * The ID of the resource group to which the SSL server belongs.
53855
+ * The resource group ID of the SSL server.
52934
53856
  *
52935
- * The SSL server has the same resource group as its associated VPN gateway instance.
52936
- *
52937
- * You can call the [DescribeVpnGateway](https://help.aliyun.com/document_detail/2526915.html) operation to query the ID of the resource group to which the VPN gateway instance belongs.
53857
+ * The SSL server and its associated VPN gateway belong to the same resource group. You can call the [DescribeVpnGateway](https://help.aliyun.com/document_detail/2794055.html) operation to query the ID of the resource group to which the VPN gateway belongs.
52938
53858
  *
52939
53859
  * @example
52940
53860
  * rg-acfmzs372yg****
@@ -52996,7 +53916,7 @@ export declare class DescribeSslVpnServersResponseBody extends $dara.Model {
52996
53916
  requestId?: string;
52997
53917
  /**
52998
53918
  * @remarks
52999
- * The detailed information about the SSL-VPN server.
53919
+ * The detailed information about the SSL-VPN servers.
53000
53920
  */
53001
53921
  sslVpnServers?: DescribeSslVpnServersResponseBodySslVpnServers;
53002
53922
  /**
@@ -54247,9 +55167,15 @@ export declare class DescribeVcoRouteEntriesResponseBody extends $dara.Model {
54247
55167
  totalCount?: number;
54248
55168
  /**
54249
55169
  * @remarks
54250
- * The list of routes.
55170
+ * The list of route entries.
54251
55171
  */
54252
55172
  vcoRouteEntries?: DescribeVcoRouteEntriesResponseBodyVcoRouteEntries[];
55173
+ /**
55174
+ * @remarks
55175
+ * The information on route entries of the dual-tunnel IPsec connection.
55176
+ *
55177
+ * > This parameter is returned only for IPsec connections in dual-tunnel mode.
55178
+ */
54253
55179
  vpnRouteCounts?: DescribeVcoRouteEntriesResponseBodyVpnRouteCounts[];
54254
55180
  static names(): {
54255
55181
  [key: string]: string;
@@ -55448,9 +56374,9 @@ export declare class DescribeVpnConnectionResponseBody extends $dara.Model {
55448
56374
  transitRouterName?: string;
55449
56375
  /**
55450
56376
  * @remarks
55451
- * The tunnel configuration of the IPsec-VPN connection.
56377
+ * The tunnel configurations of the IPsec-VPN connection.
55452
56378
  *
55453
- * Parameters in **TunnelOptionsSpecification** are returned only if you query IPsec-VPN connections in dual-tunnel mode.
56379
+ * Parameters in **TunnelOptionsSpecification** are returned only if you query an IPsec-VPN connection in dual-tunnel mode.
55454
56380
  */
55455
56381
  tunnelOptionsSpecification?: DescribeVpnConnectionResponseBodyTunnelOptionsSpecification;
55456
56382
  /**
@@ -55701,7 +56627,7 @@ export declare class DescribeVpnConnectionsRequest extends $dara.Model {
55701
56627
  ownerId?: number;
55702
56628
  /**
55703
56629
  * @remarks
55704
- * The number of the page to return. Default value: **1**.
56630
+ * The page number of the page to return. Default value: **1**.
55705
56631
  *
55706
56632
  * @example
55707
56633
  * 1
@@ -55709,7 +56635,7 @@ export declare class DescribeVpnConnectionsRequest extends $dara.Model {
55709
56635
  pageNumber?: number;
55710
56636
  /**
55711
56637
  * @remarks
55712
- * The number of entries to return on each page. Default value: **10**. Valid values: **1** to **50**.
56638
+ * The number of entries returned on each page. Default value: **10**. Valid values: **1** to **50**.
55713
56639
  *
55714
56640
  * @example
55715
56641
  * 10
@@ -55810,7 +56736,7 @@ export declare class DescribeVpnConnectionsResponseBody extends $dara.Model {
55810
56736
  totalCount?: number;
55811
56737
  /**
55812
56738
  * @remarks
55813
- * The information about the IPsec-VPN connection.
56739
+ * The information about the IPsec-VPN connections.
55814
56740
  */
55815
56741
  vpnConnections?: DescribeVpnConnectionsResponseBodyVpnConnections;
55816
56742
  static names(): {
@@ -55846,9 +56772,9 @@ export declare class DescribeVpnCrossAccountAuthorizationsRequest extends $dara.
55846
56772
  * @remarks
55847
56773
  * The client token that is used to ensure the idempotence of the request.
55848
56774
  *
55849
- * You can use the client to generate the value, but you must make sure that it is unique among different requests. ClientToken can contain only ASCII characters.
56775
+ * You can use the client to generate the token, but you must make sure that the token is unique among different requests. The client token can contain only ASCII characters.
55850
56776
  *
55851
- * > If you do not set this parameter, the system automatically uses **RequestId** as **ClientToken**. **RequestId** of each API request may be different.
56777
+ * > If you do not specify this parameter, the system automatically uses the **request ID** as the **client token**. The **request ID** may be different for each request.
55852
56778
  *
55853
56779
  * @example
55854
56780
  * 123e4567-e89b-12d3-a456-4266****
@@ -55857,7 +56783,7 @@ export declare class DescribeVpnCrossAccountAuthorizationsRequest extends $dara.
55857
56783
  ownerAccount?: string;
55858
56784
  /**
55859
56785
  * @remarks
55860
- * The number of the page to return. Default value: **1**.
56786
+ * The page number. Default value: **1**.
55861
56787
  *
55862
56788
  * @example
55863
56789
  * 1
@@ -55865,7 +56791,7 @@ export declare class DescribeVpnCrossAccountAuthorizationsRequest extends $dara.
55865
56791
  pageNumber?: number;
55866
56792
  /**
55867
56793
  * @remarks
55868
- * The number of entries to return on each page. Default value: **10**. Valid values: **1** to **50**.
56794
+ * The number of entries to return per page. Default value: **10**. Valid values: **1** to **50**.
55869
56795
  *
55870
56796
  * @example
55871
56797
  * 10
@@ -55875,7 +56801,7 @@ export declare class DescribeVpnCrossAccountAuthorizationsRequest extends $dara.
55875
56801
  * @remarks
55876
56802
  * The ID of the region to which the IPsec-VPN connection belongs.
55877
56803
  *
55878
- * You can call the [DescribeRegions](https://help.aliyun.com/document_detail/36063.html) operation to query the most recent region list.
56804
+ * You can call the [DescribeRegions](https://help.aliyun.com/document_detail/36063.html) operation to query the region ID.
55879
56805
  *
55880
56806
  * This parameter is required.
55881
56807
  *
@@ -55914,7 +56840,7 @@ export declare class DescribeVpnCrossAccountAuthorizationsResponseBody extends $
55914
56840
  crossAccountAuthorizations?: DescribeVpnCrossAccountAuthorizationsResponseBodyCrossAccountAuthorizations[];
55915
56841
  /**
55916
56842
  * @remarks
55917
- * The page number of the returned page.
56843
+ * The page number.
55918
56844
  *
55919
56845
  * @example
55920
56846
  * 1
@@ -55922,7 +56848,7 @@ export declare class DescribeVpnCrossAccountAuthorizationsResponseBody extends $
55922
56848
  pageNumber?: number;
55923
56849
  /**
55924
56850
  * @remarks
55925
- * The number of entries returned per page.
56851
+ * The number of entries per page.
55926
56852
  *
55927
56853
  * @example
55928
56854
  * 10
@@ -55930,7 +56856,7 @@ export declare class DescribeVpnCrossAccountAuthorizationsResponseBody extends $
55930
56856
  pageSize?: number;
55931
56857
  /**
55932
56858
  * @remarks
55933
- * The ID of the request.
56859
+ * The request ID.
55934
56860
  *
55935
56861
  * @example
55936
56862
  * DB04E39A-6F0C-36AC-BCA0-B6D371B90062
@@ -56340,6 +57266,12 @@ export declare class DescribeVpnGatewayResponse extends $dara.Model {
56340
57266
  }
56341
57267
  export declare class DescribeVpnGatewayAvailableZonesRequest extends $dara.Model {
56342
57268
  /**
57269
+ * @remarks
57270
+ * The language in which the returned results are displayed. Valid values:
57271
+ *
57272
+ * * **zh-CN**: Chinese
57273
+ * * **en-US** (default): English
57274
+ *
56343
57275
  * @example
56344
57276
  * zh-CN
56345
57277
  */
@@ -56348,6 +57280,8 @@ export declare class DescribeVpnGatewayAvailableZonesRequest extends $dara.Model
56348
57280
  ownerId?: number;
56349
57281
  /**
56350
57282
  * @remarks
57283
+ * The region ID.
57284
+ *
56351
57285
  * This parameter is required.
56352
57286
  *
56353
57287
  * @example
@@ -56358,6 +57292,22 @@ export declare class DescribeVpnGatewayAvailableZonesRequest extends $dara.Model
56358
57292
  resourceOwnerId?: number;
56359
57293
  /**
56360
57294
  * @remarks
57295
+ * The bandwidth specification.
57296
+ *
57297
+ * * If an IPsec-VPN connection can be associated with the VPN gateway, this parameter specifies the bandwidth specification of the VPN gateway.
57298
+ * * In scenarios where an IPsec-VPN connection can be associated with a transit router. This parameter specifies the bandwidth specification supported by an IPsec-VPN connection.
57299
+ *
57300
+ * Different bandwidth specifications may affect returned zone information. Valid values:
57301
+ *
57302
+ * * **5M**
57303
+ * * **10M**
57304
+ * * **20M**
57305
+ * * **50M**
57306
+ * * **100M**
57307
+ * * **200M**
57308
+ * * **500M**
57309
+ * * **1000M**
57310
+ *
56361
57311
  * This parameter is required.
56362
57312
  *
56363
57313
  * @example
@@ -56376,13 +57326,23 @@ export declare class DescribeVpnGatewayAvailableZonesRequest extends $dara.Model
56376
57326
  });
56377
57327
  }
56378
57328
  export declare class DescribeVpnGatewayAvailableZonesResponseBody extends $dara.Model {
57329
+ /**
57330
+ * @remarks
57331
+ * The zones.
57332
+ */
56379
57333
  availableZoneIdList?: DescribeVpnGatewayAvailableZonesResponseBodyAvailableZoneIdList[];
56380
57334
  /**
57335
+ * @remarks
57336
+ * The region ID.
57337
+ *
56381
57338
  * @example
56382
57339
  * cn-hangzhou
56383
57340
  */
56384
57341
  regionId?: string;
56385
57342
  /**
57343
+ * @remarks
57344
+ * The request ID.
57345
+ *
56386
57346
  * @example
56387
57347
  * 29784052-931F-543D-A612-36B3838163FA
56388
57348
  */
@@ -56810,10 +57770,16 @@ export declare class DescribeVpnRouteEntriesResponseBody extends $dara.Model {
56810
57770
  * 1
56811
57771
  */
56812
57772
  totalCount?: number;
57773
+ /**
57774
+ * @remarks
57775
+ * The information about route entries of the VPN gateway in dual-tunnel mode.
57776
+ *
57777
+ * > This parameter is returned only if the VPN gateway supports IPsec-VPN connections in dual-tunnel mode.
57778
+ */
56813
57779
  vpnRouteCounts?: DescribeVpnRouteEntriesResponseBodyVpnRouteCounts;
56814
57780
  /**
56815
57781
  * @remarks
56816
- * The list of route entries.
57782
+ * The route entry list.
56817
57783
  */
56818
57784
  vpnRouteEntries?: DescribeVpnRouteEntriesResponseBodyVpnRouteEntries;
56819
57785
  static names(): {
@@ -56945,9 +57911,7 @@ export declare class DescribeVpnSslServerLogsResponseBody extends $dara.Model {
56945
57911
  count?: number;
56946
57912
  /**
56947
57913
  * @remarks
56948
- * An array of strings.
56949
- *
56950
- * Each item in the array is a log entry.
57914
+ * Log information list.
56951
57915
  */
56952
57916
  data?: DescribeVpnSslServerLogsResponseBodyData;
56953
57917
  /**
@@ -57348,10 +58312,10 @@ export declare class DiagnoseVpnGatewayRequest extends $dara.Model {
57348
58312
  clientToken?: string;
57349
58313
  /**
57350
58314
  * @remarks
57351
- * The configuration when you check the connectivity of the IPsec-VPN connection. Valid values:
58315
+ * Check the connectivity of the destination address. Valid values:
57352
58316
  *
57353
- * * **PrivateSourceIp**: the source IP address used when you check the connectivity of the IPsec-VPN connection. The source IP address must be on the VPC side.
57354
- * * **PrivateDestinationIp**: the destination IP address used when you check the connectivity of the IPsec-VPN connection. The destination IP address must be on the data center side.
58317
+ * * **PrivateSourceIp**: the source IP address. The source IP address must be on the VPC side.
58318
+ * * **PrivateDestinationIp**: the destination IP address. The destination IP address must be on the data center side.
57355
58319
  *
57356
58320
  * @example
57357
58321
  * {"PrivateSourceIp":"192.168.1.1","PrivateDestinationIp":"192.168.0.1"}
@@ -57415,7 +58379,9 @@ export declare class DiagnoseVpnGatewayRequest extends $dara.Model {
57415
58379
  export declare class DiagnoseVpnGatewayResponseBody extends $dara.Model {
57416
58380
  /**
57417
58381
  * @remarks
57418
- * The ID of the diagnostic.
58382
+ * The diagnostic ID.
58383
+ *
58384
+ * After a diagnostic ID is returned, you can call [GetVpnGatewayDiagnoseResult](https://help.aliyun.com/document_detail/2521963.html) to query the diagnostic report.
57419
58385
  *
57420
58386
  * @example
57421
58387
  * vpndgn-uf6kuxbe3iv028k3s****
@@ -57850,9 +58816,9 @@ export declare class DissociateRouteTablesFromVpcGatewayEndpointResponse extends
57850
58816
  export declare class DissociateVpnGatewayWithCertificateRequest extends $dara.Model {
57851
58817
  /**
57852
58818
  * @remarks
57853
- * The certificate ID.
58819
+ * The ID of the certificate.
57854
58820
  *
57855
- * > The certificate ID refers to the ID generated after the SSL certificate is associated with the VPN gateway. It is not the ID of the SSL certificate. You can call the [ListVpnCertificateAssociations](https://help.aliyun.com/document_detail/2521961.html) operation to query certificate IDs.
58821
+ * > The certificate ID refers to the ID generated after the SSL certificate is associated with the VPN gateway. It is not the ID of the SSL certificate.
57856
58822
  *
57857
58823
  * This parameter is required.
57858
58824
  *
@@ -61228,9 +62194,7 @@ export declare class ListIpsecServerLogsResponseBody extends $dara.Model {
61228
62194
  count?: number;
61229
62195
  /**
61230
62196
  * @remarks
61231
- * An array of strings.
61232
- *
61233
- * Each item in the array is a log entry.
62197
+ * Log information list.
61234
62198
  */
61235
62199
  data?: string[];
61236
62200
  /**
@@ -61309,7 +62273,7 @@ export declare class ListIpsecServersRequest extends $dara.Model {
61309
62273
  * @remarks
61310
62274
  * The name of the IPsec server.
61311
62275
  *
61312
- * The name must be 1 to 100 characters in length and cannot start with `http://` or `https://`.
62276
+ * The name must be 1 to 100 characters in length.
61313
62277
  *
61314
62278
  * @example
61315
62279
  * test
@@ -61350,9 +62314,7 @@ export declare class ListIpsecServersRequest extends $dara.Model {
61350
62314
  * @remarks
61351
62315
  * The ID of the resource group to which the IPsec server belongs.
61352
62316
  *
61353
- * The IPsec server has the same resource group as its associated VPN gateway instance.
61354
- *
61355
- * You can call the [DescribeVpnGateway](https://help.aliyun.com/document_detail/2526915.html) operation to query the ID of the resource group to which the VPN gateway instance belongs.
62317
+ * The IPsec server and its associated VPN gateway belong to the same resource group. You can call [DescribeVpnGateway](https://help.aliyun.com/document_detail/2794055.html) to query the ID of the resource group to which the VPN gateway belongs.
61356
62318
  *
61357
62319
  * @example
61358
62320
  * rg-acfmzs372yg****
@@ -64727,6 +65689,106 @@ export declare class ModifyEipAddressAttributeResponse extends $dara.Model {
64727
65689
  [key: string]: any;
64728
65690
  });
64729
65691
  }
65692
+ export declare class ModifyEipForwardModeRequest extends $dara.Model {
65693
+ /**
65694
+ * @remarks
65695
+ * The client token that is used to ensure the idempotence of the request.
65696
+ *
65697
+ * You can use the client to generate the token, but you must make sure that the token is unique among different requests. The client token can contain only ASCII characters.
65698
+ *
65699
+ * > If you do not specify this parameter, the system automatically uses the **request ID** as the **client token**. The **RequestId** may be different for each request.
65700
+ *
65701
+ * @example
65702
+ * 02fb3da4-130e-11e9-8e44-0016e04115b
65703
+ */
65704
+ clientToken?: string;
65705
+ /**
65706
+ * @remarks
65707
+ * The ID of the EIP whose attributes you want to modify.
65708
+ *
65709
+ * This parameter is required.
65710
+ *
65711
+ * @example
65712
+ * eip-j5ebhbw3br92fy****
65713
+ */
65714
+ instanceId?: string;
65715
+ /**
65716
+ * @remarks
65717
+ * The association mode. Valid values:
65718
+ *
65719
+ * * **NAT** (default): the standard NAT mode.
65720
+ * * **MULTI_BINDED**: the multi-EIP-to-ENI mode.
65721
+ * * **BINDED**: the cut-through mode.
65722
+ *
65723
+ * > This parameter is required only if **InstanceType** is set to **NetworkInterface**.
65724
+ *
65725
+ * This parameter is required.
65726
+ *
65727
+ * @example
65728
+ * BINDED
65729
+ */
65730
+ mode?: string;
65731
+ ownerId?: number;
65732
+ /**
65733
+ * @remarks
65734
+ * The ID of the region to which the EIP belongs. You can call the DescribeRegions operation to query the most recent region list.
65735
+ *
65736
+ * This parameter is required.
65737
+ *
65738
+ * @example
65739
+ * cn-hangzhou
65740
+ */
65741
+ regionId?: string;
65742
+ resourceOwnerAccount?: string;
65743
+ resourceOwnerId?: number;
65744
+ static names(): {
65745
+ [key: string]: string;
65746
+ };
65747
+ static types(): {
65748
+ [key: string]: any;
65749
+ };
65750
+ validate(): void;
65751
+ constructor(map?: {
65752
+ [key: string]: any;
65753
+ });
65754
+ }
65755
+ export declare class ModifyEipForwardModeResponseBody extends $dara.Model {
65756
+ /**
65757
+ * @remarks
65758
+ * The request ID.
65759
+ *
65760
+ * @example
65761
+ * 62C6A6A5-1534-53D9-AB1E-C9307A147ED5
65762
+ */
65763
+ requestId?: string;
65764
+ static names(): {
65765
+ [key: string]: string;
65766
+ };
65767
+ static types(): {
65768
+ [key: string]: any;
65769
+ };
65770
+ validate(): void;
65771
+ constructor(map?: {
65772
+ [key: string]: any;
65773
+ });
65774
+ }
65775
+ export declare class ModifyEipForwardModeResponse extends $dara.Model {
65776
+ headers?: {
65777
+ [key: string]: string;
65778
+ };
65779
+ statusCode?: number;
65780
+ body?: ModifyEipForwardModeResponseBody;
65781
+ static names(): {
65782
+ [key: string]: string;
65783
+ };
65784
+ static types(): {
65785
+ [key: string]: any;
65786
+ };
65787
+ validate(): void;
65788
+ constructor(map?: {
65789
+ [key: string]: any;
65790
+ });
65791
+ }
64730
65792
  export declare class ModifyExpressCloudConnectionAttributeRequest extends $dara.Model {
64731
65793
  /**
64732
65794
  * @remarks
@@ -66729,17 +67791,38 @@ export declare class ModifyIPv6TranslatorEntryResponse extends $dara.Model {
66729
67791
  });
66730
67792
  }
66731
67793
  export declare class ModifyIpv6AddressAttributeRequest extends $dara.Model {
67794
+ /**
67795
+ * @remarks
67796
+ * The client token that is used to ensure the idempotence of the request.
67797
+ *
67798
+ * You can use the client to generate the token, but you must make sure that the token is unique among different requests. The client token can contain only ASCII characters.
67799
+ *
67800
+ * > If you do not specify this parameter, the system automatically uses the **request ID** as the **client token**. The **request ID** may be different for each request.
67801
+ *
67802
+ * @example
67803
+ * d7d24a21-f4ba-4454-9173-b3828dae492b
67804
+ */
66732
67805
  clientToken?: string;
66733
67806
  /**
66734
67807
  * @remarks
66735
67808
  * The description of the IPv6 address.
66736
67809
  *
66737
- * It must be 2 to 256 characters in length, and can contain letters, digits, periods (.), underscores (_), and hyphens (-). It must start with a letter. The name must start with a letter and cannot start with `http://` or `https://`.
67810
+ * The description must be 0 to 256 characters in length and cannot start with `http://` or `https://`.
66738
67811
  *
66739
67812
  * @example
66740
67813
  * test
66741
67814
  */
66742
67815
  description?: string;
67816
+ /**
67817
+ * @remarks
67818
+ * Specifies whether to perform a dry run, without performing the actual request. Valid values:
67819
+ *
67820
+ * * **true**: performs only a dry run. The system checks the request for potential issues, including missing parameter values, incorrect request syntax, and service limits. If the request fails the dry run, an error message is returned. If the request passes the dry run, the `DryRunOperation` error code is returned.
67821
+ * * **false** (default): performs a dry run and performs the actual request. If the request passes the dry run, a 2xx HTTP status code is returned and the operation is performed.
67822
+ *
67823
+ * @example
67824
+ * false
67825
+ */
66743
67826
  dryRun?: boolean;
66744
67827
  /**
66745
67828
  * @remarks
@@ -66755,7 +67838,7 @@ export declare class ModifyIpv6AddressAttributeRequest extends $dara.Model {
66755
67838
  * @remarks
66756
67839
  * The name of the IPv6 address.
66757
67840
  *
66758
- * The name must be 2 to 128 characters in length, and can contain letters, digits, periods (.), underscores (_), and hyphens (-). The name must start with a letter. The name must start with a letter and cannot start with `http://` or `https://`.
67841
+ * The name must be 0 to 128 characters in length and cannot start with `http://` or `https://`.
66759
67842
  *
66760
67843
  * @example
66761
67844
  * test
@@ -66824,15 +67907,38 @@ export declare class ModifyIpv6AddressAttributeResponse extends $dara.Model {
66824
67907
  });
66825
67908
  }
66826
67909
  export declare class ModifyIpv6GatewayAttributeRequest extends $dara.Model {
67910
+ /**
67911
+ * @remarks
67912
+ * The client token that is used to ensure the idempotence of the request.
67913
+ *
67914
+ * You can use the client to generate the token, but you must make sure that the token is unique among different requests. The client token can contain only ASCII characters.
67915
+ *
67916
+ * > If you do not specify this parameter, the system automatically uses the **request ID** as the **client token**. The **request ID** may be different for each request.
67917
+ *
67918
+ * @example
67919
+ * 02fb3da4-130e-11e9-8e44-0016e04115b
67920
+ */
66827
67921
  clientToken?: string;
66828
67922
  /**
66829
67923
  * @remarks
66830
67924
  * The description of the IPv6 gateway.
66831
67925
  *
67926
+ * The description must be 0 to 256 characters in length and cannot start with `http://` or `https://`.
67927
+ *
66832
67928
  * @example
66833
67929
  * ipv6description
66834
67930
  */
66835
67931
  description?: string;
67932
+ /**
67933
+ * @remarks
67934
+ * Specifies whether to perform only a dry run, without performing the actual request. Valid values:
67935
+ *
67936
+ * * **true**: performs only a dry run. The system checks the request for potential issues, including invalid AccessKey pairs, unauthorized RAM users, and missing parameter values. If the request fails the dry run, an error message is returned. If the request passes dry run, the `DryRunOperation` error code is returned.
67937
+ * * **false**: sends the API request. After the request passes the check, a 2XX HTTP status code is returned and the gateway endpoint is associated with the route table. This is the default value.
67938
+ *
67939
+ * @example
67940
+ * false
67941
+ */
66836
67942
  dryRun?: boolean;
66837
67943
  /**
66838
67944
  * @remarks
@@ -66848,7 +67954,7 @@ export declare class ModifyIpv6GatewayAttributeRequest extends $dara.Model {
66848
67954
  * @remarks
66849
67955
  * The name of the IPv6 gateway.
66850
67956
  *
66851
- * It must be 2 to 256 characters in length, and can contain letters, digits, periods (.), underscores (_), and hyphens (-). It must start with a letter. The name must start with a letter and cannot start with `http://` or `https://`.
67957
+ * The name must be 0 to 128 characters in length and cannot start with `http://` or `https://`.
66852
67958
  *
66853
67959
  * @example
66854
67960
  * ipv6name
@@ -66942,6 +68048,16 @@ export declare class ModifyIpv6InternetBandwidthRequest extends $dara.Model {
66942
68048
  * 123e4567-e89b-12d3-a456-426655440000
66943
68049
  */
66944
68050
  clientToken?: string;
68051
+ /**
68052
+ * @remarks
68053
+ * Specifies whether to perform a dry run, without sending the actual request. Valid values:
68054
+ *
68055
+ * * **true**: pre-checks the request but does not create the IPv4 gateway. The system checks the request for potential issues, including missing parameter values, incorrect request syntax, and service limits. If the request fails the dry run, an error code is returned. If the request passes the dry run, the `DryRunOperation` error code is returned.
68056
+ * * **false** (default): sends the API request. After the request passes the check, an HTTP 2xx status code is returned and the IPv4 gateway is created.
68057
+ *
68058
+ * @example
68059
+ * false
68060
+ */
66945
68061
  dryRun?: boolean;
66946
68062
  /**
66947
68063
  * @remarks
@@ -68679,7 +69795,45 @@ export declare class ModifySslVpnServerRequest extends $dara.Model {
68679
69795
  cipher?: string;
68680
69796
  /**
68681
69797
  * @remarks
68682
- * The client IP address pool.
69798
+ * The client CIDR block.
69799
+ *
69800
+ * The CIDR block from which an IP address is allocated to the virtual network interface controller (NIC) of the client, rather than the private CIDR block.
69801
+ *
69802
+ * If the client accesses the SSL server over an SSL-VPN connection, the VPN gateway assigns an IP address from the specified client CIDR block for the client to access cloud resources.
69803
+ *
69804
+ * Make sure that the number of IP addresses in the client CIDR block is at least four times the maximum number of SSL-VPN connections supported by the VPN gateway.
69805
+ *
69806
+ * <details>
69807
+ * <summary>Click to view the reason.</summary>
69808
+ *
69809
+ * For example, if you specify 192.168.0.0/24 as the client CIDR block, the system first divides a subnet CIDR block with a subnet mask of 30 from 192.168.0.0/24, such as 192.168.0.4/30. This subnet provides up to four IP addresses. Then, the system allocates an IP address from 192.168.0.4/30 to the client and uses the other three IP addresses to ensure network communication. In this case, one client consumes four IP addresses. Therefore, to ensure that an IP address is assigned to your client, the number of IP addresses in the client CIDR block must be at least four times the maximum number of SSL-VPN connections supported by the VPN gateway with which the SSL server is associated.
69810
+ * </details>
69811
+ * <details>
69812
+ * <summary>Click to view the CIDR blocks that are not supported.</summary>
69813
+ *
69814
+ * * 100.64.0.0~100.127.255.255
69815
+ * * 127.0.0.0~127.255.255.255
69816
+ * * 169.254.0.0~169.254.255.255
69817
+ * * 224.0.0.0~239.255.255.255
69818
+ * * 255.0.0.0~255.255.255.255
69819
+ * </details>
69820
+ * <details>
69821
+ * <summary>Click to view the recommended client CIDR blocks for different numbers of SSL-VPN connections.</summary>
69822
+ *
69823
+ * * If the number of SSL-VPN connections is 5, we recommend that you specify a client CIDR block with a subnet mask that is less than or equal to 27 bits in length. Examples: 10.0.0.0/27 and 10.0.0.0/26.
69824
+ * * If the number of SSL-VPN connections is 10, we recommend that you specify a client CIDR block with a subnet mask that is less than or equal to 26 bits in length. Examples: 10.0.0.0/26 and 10.0.0.0/25.
69825
+ * * If the number of SSL-VPN connections is 20, we recommend that you specify a client CIDR block with a subnet mask that is less than or equal to 25 bits in length. Examples: 10.0.0.0/25 and 10.0.0.0/24.
69826
+ * * If the number of SSL-VPN connections is 50, we recommend that you specify a client CIDR block with a subnet mask that is less than or equal to 24 bits in length. Examples: 10.0.0.0/24 and 10.0.0.0/23.
69827
+ * * If the number of SSL-VPN connections is 100, we recommend that you specify a client CIDR block with a subnet mask that is less than or equal to 23 bits in length. Examples: 10.0.0.0/23 and 10.0.0.0/22.
69828
+ * * If the number of SSL-VPN connections is 200, we recommend that you specify a client CIDR block with a subnet mask that is less than or equal to 22 bits in length. Examples: 10.0.0.0/22 and 10.0.0.0/21.
69829
+ * * If the number of SSL-VPN connections is 500, we recommend that you specify a client CIDR block with a subnet mask that is less than or equal to 21 bits in length. Examples: 10.0.0.0/21 and 10.0.0.0/20.
69830
+ * * If the number of SSL-VPN connections is 1,000, we recommend that you specify a client CIDR block with a subnet mask that is less than or equal to 20 bits in length. Examples: 10.0.0.0/20 and 10.0.0.0/19.
69831
+ * </details>
69832
+ *
69833
+ * > - The subnet mask of the client CIDR block must be 16 to 29 bits in length.
69834
+ * > - Make sure that the client CIDR block does not overlap with the local CIDR block, the VPC CIDR block, or route CIDR blocks associated with the client.
69835
+ * > - We recommend that you use 10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16, or one of their subnets as the client CIDR block. If you want to specify a public CIDR block as the client CIDR block, you must specify the public CIDR block as the user CIDR block of the virtual private cloud (VPC). This way, the VPC can access the public CIDR block. For more information, see [VPC FAQs](https://help.aliyun.com/document_detail/185311.html).
69836
+ * > - After you create an SSL server, the system automatically adds routes that point to the client CIDR block to the VPC route table. Do not manually add routes that point to the client CIDR block. Otherwise, SSL-VPN connections cannot work as expected.
68683
69837
  *
68684
69838
  * @example
68685
69839
  * 10.30.30.0/24
@@ -68710,13 +69864,14 @@ export declare class ModifySslVpnServerRequest extends $dara.Model {
68710
69864
  compress?: boolean;
68711
69865
  /**
68712
69866
  * @remarks
68713
- * Specifies whether to enable two-factor authentication. If you enable two-factor authentication, you must also specify an IDaaS EIAM instance ID and an IDaaS application ID. Valid values:
69867
+ * Specifies whether to enable two-factor authentication. To enable two-factor authentication, you need to specify **IDaaSInstanceId**, **IDaaSRegionId**, and **IDaaSApplicationId**. Valid values:
68714
69868
  *
68715
- * * **true**
68716
- * * **false**
69869
+ * * **true**: enables the feature.
69870
+ * * **false**: disables the feature.
68717
69871
  *
68718
- * > - If you use two-factor authentication for the first time, you must first complete [authorization](https://ram.console.aliyun.com/role/authorization?request=%7B%22Services%22%3A%5B%7B%22Service%22%3A%22VPN%22%2C%22Roles%22%3A%5B%7B%22RoleName%22%3A%22AliyunVpnAccessingIdaasRole%22%2C%22TemplateId%22%3A%22IdaasRole%22%7D%5D%7D%5D%2C%22ReturnUrl%22%3A%22https%3A%2F%2Fvpc.console.aliyun.com%2Fsslvpn%2Fcn-shanghai%2Fvpn-servers%22%7D).
68719
- * > - IDaaS EIAM 1.0 instances are no longer for purchase. If your Alibaba Cloud account has IDaaS EIAM 1.0 instances, the IDaaS EIAM 1.0 instances can be associated after two-factor authentication is enabled. If your Alibaba Cloud account does not have IDaaS EIAM 1.0 instances, only IDaaS EIAM 2.0 instances can be associated after two-factor authentication is enabled.
69872
+ * > - If you use two-factor authentication for the first time, you must first complete [authorization](https://ram.console.aliyun.com/role/authorization?request=%7B%22Services%22%3A%5B%7B%22Service%22%3A%22VPN%22%2C%22Roles%22%3A%5B%7B%22RoleName%22%3A%22AliyunVpnAccessingIdaasRole%22%2C%22TemplateId%22%3A%22IdaasRole%22%7D%5D%7D%5D%2C%22ReturnUrl%22%3A%22https%3A%2F%2Fvpc.console.aliyun.com%2Fsslvpn%2Fcn-shanghai%2Fvpn-servers%22%7D).
69873
+ * > - When you create an SSL server in the UAE (Dubai) region, we recommend that you associate the SSL server with an IDaaS EIAM 2.0 instance in Singapore to reduce latency.
69874
+ * > - IDaaS EIAM 1.0 instances are no longer available for purchase. If your Alibaba Cloud account has IDaaS EIAM 1.0 instances, the IDaaS EIAM 1.0 instances can be associated after two-factor authentication is enabled. If your Alibaba Cloud account does not have IDaaS EIAM 1.0 instances, only IDaaS EIAM 2.0 instances can be associated after two-factor authentication is enabled.
68720
69875
  *
68721
69876
  * @example
68722
69877
  * false
@@ -68751,7 +69906,18 @@ export declare class ModifySslVpnServerRequest extends $dara.Model {
68751
69906
  IDaaSRegionId?: string;
68752
69907
  /**
68753
69908
  * @remarks
68754
- * The CIDR block of the client.
69909
+ * The local CIDR block.
69910
+ *
69911
+ * The CIDR block that your client needs to access by using the SSL-VPN connection.
69912
+ *
69913
+ * This value can be the CIDR block of a VPC, a vSwitch, a data center that is connected to a VPC by using an Express Connect circuit, or an Alibaba Cloud service such as Object Storage Service (OSS).
69914
+ *
69915
+ * The subnet mask of the specified local CIDR block must be 8 to 32 bits in length. You cannot specify the following CIDR blocks as the local CIDR blocks:
69916
+ *
69917
+ * * 127.0.0.0~127.255.255.255
69918
+ * * 169.254.0.0~169.254.255.255
69919
+ * * 224.0.0.0~239.255.255.255
69920
+ * * 255.0.0.0~255.255.255.255
68755
69921
  *
68756
69922
  * @example
68757
69923
  * 10.20.20.0/24
@@ -68836,7 +70002,7 @@ export declare class ModifySslVpnServerResponseBody extends $dara.Model {
68836
70002
  cipher?: string;
68837
70003
  /**
68838
70004
  * @remarks
68839
- * The client IP address pool.
70005
+ * The client CIDR block.
68840
70006
  *
68841
70007
  * @example
68842
70008
  * 10.30.30.0/24
@@ -68914,7 +70080,7 @@ export declare class ModifySslVpnServerResponseBody extends $dara.Model {
68914
70080
  internetIp?: string;
68915
70081
  /**
68916
70082
  * @remarks
68917
- * The CIDR block of the client.
70083
+ * The local CIDR block.
68918
70084
  *
68919
70085
  * @example
68920
70086
  * 10.20.20.0/24
@@ -69581,7 +70747,7 @@ export declare class ModifyVcoRouteEntryWeightRequest extends $dara.Model {
69581
70747
  ownerAccount?: string;
69582
70748
  /**
69583
70749
  * @remarks
69584
- * The ID of the region where the IPsec-VPN connection is established.
70750
+ * The region ID of the IPsec-VPN connection.
69585
70751
  *
69586
70752
  * You can call the [DescribeRegions](https://help.aliyun.com/document_detail/36063.html) operation to query the most recent region list.
69587
70753
  *
@@ -70236,7 +71402,9 @@ export declare class ModifyVpnAttachmentAttributeRequest extends $dara.Model {
70236
71402
  autoConfigRoute?: boolean;
70237
71403
  /**
70238
71404
  * @remarks
70239
- * The Border Gateway Protocol (BGP) configuration:
71405
+ * This parameter is supported if you modify the configurations of an IPsec-VPN connection in single-tunnel mode.
71406
+ *
71407
+ * BGP configuration:
70240
71408
  *
70241
71409
  * * **BgpConfig.EnableBgp**: specifies whether to enable BGP. Valid values:
70242
71410
  *
@@ -70245,16 +71413,16 @@ export declare class ModifyVpnAttachmentAttributeRequest extends $dara.Model {
70245
71413
  *
70246
71414
  * * **BgpConfig.LocalAsn**: the autonomous system number (ASN) on the Alibaba Cloud side. Valid values: **1** to **4294967295**.
70247
71415
  *
70248
- * You can enter the ASN in two segments. Separate the first 16 bits of the ASN from the remaining 16 bits with a period (.). Enter the number in each segment in decimal format.
71416
+ * You can enter a value in two segments separated by a period (.). Each segment is 16 bits in length. Enter the number in each segment in decimal format.
70249
71417
  *
70250
- * For example, if you enter 123.456, the ASN is: 123 × 65536 + 456 = 8061384.
71418
+ * For example, if you enter 123.456, the ASN is 8061384. The ASN is calculated by using the following formula: 123 × 65536 + 456 = 8061384.
70251
71419
  *
70252
- * * **BgpConfig.TunnelCidr:** the CIDR block of the IPsec tunnel. The CIDR block falls within 169.254.0.0/16. The subnet mask of the CIDR block must be 30 bits in length.
71420
+ * * **BgpConfig.TunnelCidr**: The CIDR block of the IPsec tunnel. The CIDR block must fall into 169.254.0.0/16 and the mask of the CIDR block must be 30 bits in length. The CIDR block cannot be 169.254.0.0/30, 169.254.1.0/30, 169.254.2.0/30, 169.254.3.0/30, 169.254.4.0/30, 169.254.5.0/30, 169.254.6.0/30, or 169.254.169.252/30.
70253
71421
  *
70254
- * * **LocalBgpIp:** the BGP IP address on the Alibaba Cloud side. This IP address must fall within the CIDR block of the IPsec tunnel.
71422
+ * * **LocalBgpIp**: the BGP address on the Alibaba Cloud side. It must be an IP address that falls within the CIDR block of the IPsec tunnel.
70255
71423
  *
70256
- * > - Before you configure BGP, we recommend that you learn how BGP dynamic routing works and the limits of using BGP dynamic routing. For more information, see [BGP dynamic routing ](https://help.aliyun.com/document_detail/170235.html).
70257
- * > - We recommend that you use a private ASN to establish a connection with Alibaba Cloud over BGP. Refer to the relevant documentation for the private ASN range.
71424
+ * > - Before you add BGP configurations, we recommend that you learn about how BGP works and the limits. For more information, see [Configure BGP dynamic routing](https://help.aliyun.com/document_detail/445767.html).
71425
+ * > - We recommend that you use a private ASN to establish BGP connections to Alibaba Cloud. Refer to the relevant documentation for the private ASN range.
70258
71426
  *
70259
71427
  * @example
70260
71428
  * {"EnableBgp":"true","LocalAsn":"45104","TunnelCidr":"169.254.11.0/30","LocalBgpIp":"169.254.11.1"}
@@ -70274,7 +71442,9 @@ export declare class ModifyVpnAttachmentAttributeRequest extends $dara.Model {
70274
71442
  clientToken?: string;
70275
71443
  /**
70276
71444
  * @remarks
70277
- * The customer gateway associated with the IPsec-VPN connection.
71445
+ * The customer gateways to be associated with the IPsec-VPN connections.
71446
+ *
71447
+ * > Only single-tunnel IPsec-VPN connections support this parameter.
70278
71448
  *
70279
71449
  * @example
70280
71450
  * cgw-p0w2jemrcj5u61un8****
@@ -70293,10 +71463,12 @@ export declare class ModifyVpnAttachmentAttributeRequest extends $dara.Model {
70293
71463
  effectImmediately?: boolean;
70294
71464
  /**
70295
71465
  * @remarks
70296
- * Specifies whether to enable the dead peer detection (DPD) feature. Valid values:
71466
+ * This parameter is supported if you modify the configurations of an IPsec-VPN connection in single-tunnel mode.
70297
71467
  *
70298
- * * **true**: enables the DPD feature. The initiator of the IPsec-VPN connection sends DPD packets to check the existence and availability of the peer. If no feedback is received from the peer within a specific period of time, the connection fails. Then, the ISAKMP SA, IPsec SA, and IPsec tunnel are deleted.
70299
- * * **false**: disables the DPD feature. The initiator of the IPsec-VPN connection does not send DPD packets.
71468
+ * Specifies whether to enable dead peer detection (DPD). Valid values:
71469
+ *
71470
+ * * **true**: enables DPD. The initiator of the IPsec-VPN connection sends DPD packets to check the existence and availability of the peer. If no feedback is received from the peer within the specified period of time, the connection fails. In this case, ISAKMP SA and IPsec SA are deleted, along with the security tunnel.
71471
+ * * **false**: disables DPD. The initiator of the IPsec-VPN connection does not send DPD packets.
70300
71472
  *
70301
71473
  * @example
70302
71474
  * true
@@ -70304,22 +71476,36 @@ export declare class ModifyVpnAttachmentAttributeRequest extends $dara.Model {
70304
71476
  enableDpd?: boolean;
70305
71477
  /**
70306
71478
  * @remarks
71479
+ * This parameter is supported if you modify the configurations of an IPsec-VPN connection in single-tunnel mode.
71480
+ *
70307
71481
  * Specifies whether to enable NAT traversal. Valid values:
70308
71482
  *
70309
- * * **true** After NAT traversal is enabled, the initiator does not check the UDP ports during IKE negotiations and can automatically discover NAT gateway devices along the IPsec tunnel.
70310
- * * **false**
71483
+ * * **true**: enables NAT traversal. After NAT traversal is enabled, the initiator does not check the UDP ports during IKE negotiations and can automatically discover NAT gateway devices along the IPsec-VPN tunnel.
71484
+ * * **false**: disables NAT traversal.
70311
71485
  *
70312
71486
  * @example
70313
71487
  * true
70314
71488
  */
70315
71489
  enableNatTraversal?: boolean;
70316
71490
  /**
71491
+ * @remarks
71492
+ * You can specify this parameter if you modify the configuration of a dual-tunnel IPsec-VPN connection.
71493
+ *
71494
+ * Specifies whether to enable the BGP feature for the tunnel. Valid values: **true** and **false**.
71495
+ *
71496
+ * > Before you add BGP configurations, we recommend that you learn about how BGP works and the limits. For more information, see [Configure BGP dynamic routing](https://help.aliyun.com/document_detail/445767.html).
71497
+ *
71498
+ * @example
71499
+ * false
71500
+ *
70317
71501
  * **if can be null:**
70318
71502
  * true
70319
71503
  */
70320
71504
  enableTunnelsBgp?: boolean;
70321
71505
  /**
70322
71506
  * @remarks
71507
+ * This parameter is supported if you modify the configurations of an IPsec-VPN connection in single-tunnel mode.
71508
+ *
70323
71509
  * The health check configurations:
70324
71510
  *
70325
71511
  * * **HealthCheckConfig.enable**: specifies whether to enable the health check feature. Valid values:
@@ -70327,9 +71513,9 @@ export declare class ModifyVpnAttachmentAttributeRequest extends $dara.Model {
70327
71513
  * * **true**
70328
71514
  * * **false**
70329
71515
  *
70330
- * * **HealthCheckConfig.dip**: the destination IP address that is used for health checks. Enter the IP address on the data center side that the VPC can communicate with through the IPsec-VPN connection.
71516
+ * * **HealthCheckConfig.dip**: the destination IP address configured for health checks. Specify the IP address of the data center with which the VPC can access through the IPsec-VPN connection.
70331
71517
  *
70332
- * * **HealthCheckConfig.sip**: the source IP address that is used for health checks. Enter the IP address on the VPC side that the data center can communicate with through the IPsec-VPN connection.
71518
+ * * **HealthCheckConfig.sip**: the source IP address configured for health checks. The IP address of the VPC with which the data center can access through the IPsec-VPN connection.
70333
71519
  *
70334
71520
  * * **HealthCheckConfig.interval**: the interval between two consecutive health checks. Unit: seconds.
70335
71521
  *
@@ -70346,30 +71532,32 @@ export declare class ModifyVpnAttachmentAttributeRequest extends $dara.Model {
70346
71532
  healthCheckConfig?: string;
70347
71533
  /**
70348
71534
  * @remarks
71535
+ * This parameter is supported if you modify the configurations of an IPsec-VPN connection in single-tunnel mode.
71536
+ *
70349
71537
  * The configuration of Phase 1 negotiations:
70350
71538
  *
70351
- * * **IkeConfig.Psk**: The pre-shared key that is used for authentication between the VPN gateway and the data center.
71539
+ * * **IkeConfig.Psk**: The pre-shared key that is used for identity authentication between the Alibaba Cloud IPsec connection and the on-premises data center.
70352
71540
  *
70353
- * * The pre-shared key must be 1 to 100 characters in length and can contain letters, digits, and the following characters: ``~ ! ` @ # $ % ^ & * () _ - + = {} [] | ; : \\" , . < > / ?``
70354
- * * If you do not specify a pre-shared key, the system generates a random 16-character string as the pre-shared key. You can call the [DescribeVpnConnection](https://help.aliyun.com/document_detail/120374.html) operation to query the pre-shared key that is generated by the system.
71541
+ * * The key must be 1 to 100 characters in length, and can contain digits, and letters. The key cannot contain spaces. ``~!`@#$%^&*()_-+={}[]|;:\\",.<>/?``
71542
+ * * If you do not specify a pre-shared key, the system randomly generates a 16-bit string as the pre-shared key. You can call the [DescribeVpnConnection](https://help.aliyun.com/document_detail/120374.html) operation to query the pre-shared key that is automatically generated by the system.
70355
71543
  *
70356
- * >The pre-shared key of the IPsec-VPN connection must be the same as the authentication key of the data center. Otherwise, you cannot establish a connection between the data center and the VPN gateway.
71544
+ * > The pre-shared key of the IPsec-VPN connection must be the same as the authentication key of the on-premises data center. Otherwise, connections between the on-premises data center and the VPN gateway cannot be established.
70357
71545
  *
70358
- * * **IkeConfig.IkeVersion**: the Internet Key Exchange (IKE) version. Valid values: **ikev1** and **ikev2**.
71546
+ * * **IkeConfig.IkeVersion**: the version of the Internet Key Exchange (IKE) protocol. Valid values: **ikev1** and **ikev2**.
70359
71547
  *
70360
71548
  * * **IkeConfig.IkeMode**: the negotiation mode. Valid values: **main** and **aggressive**.
70361
71549
  *
70362
- * * **IkeConfig.IkeEncAlg**: the encryption algorithm that is used in Phase 1 negotiations. Valid values: **aes**, **aes192**, **aes256**, **des**, and **3des**.
71550
+ * * **IkeConfig.IkeEncAlg:** the encryption algorithm that is used in Phase 1 negotiations. Valid values: **aes**, **aes192**, **aes256**, **des**, and **3des**.
70363
71551
  *
70364
71552
  * * **IkeConfig.IkeAuthAlg**: the authentication algorithm that is used in Phase 1 negotiations. Valid values: **md5**, **sha1**, **sha256**, **sha384**, and **sha512**.
70365
71553
  *
70366
- * * **IkeConfig.IkePfs**: the Diffie-Hellman (DH) key exchange algorithm that is used in Phase 1 negotiations. Valid values: **group1**, **group2**, **group5**, and **group14**.
71554
+ * * **IkeConfig.IkePfs**: the Diffie-Hellman key exchange algorithm that is used in Phase 1 negotiations. Valid values: **group1**, **group2**, **group5**, and **group14**.
70367
71555
  *
70368
- * * **IkeConfig.IkeLifetime**: the security association (SA) lifetime determined by Phase 1 negotiations. Unit: seconds. Valid values: **0** to **86400**.
71556
+ * * **IkeConfig.IkeLifetime**: the SA lifetime as a result of Phase 1 negotiations. Unit: seconds. Valid values: **0** to **86400**.
70369
71557
  *
70370
- * * **IkeConfig.LocalIdIPsec**: the identifier of the IPsec-VPN connection on the Alibaba Cloud side. The identifier can be up to 100 characters in length.
71558
+ * * **IkeConfig.LocalId**: the identifier on the Alibaba Cloud side. The identifier cannot exceed 100 characters in length and cannot contain spaces.
70371
71559
  *
70372
- * * **IkeConfig.RemoteId**: the identifier of the IPsec-VPN connection on the data center side. The identifier can be up to 100 characters in length.
71560
+ * * **IkeConfig.RemoteId**: the identifier of the data center. It cannot exceed 100 characters in length and cannot contain spaces.
70373
71561
  *
70374
71562
  * @example
70375
71563
  * {"Psk":"1234****","IkeVersion":"ikev1","IkeMode":"main","IkeEncAlg":"aes","IkeAuthAlg":"sha1","IkePfs":"group2","IkeLifetime":86400,"LocalId":"47.XX.XX.1","RemoteId":"47.XX.XX.2"}
@@ -70377,12 +71565,14 @@ export declare class ModifyVpnAttachmentAttributeRequest extends $dara.Model {
70377
71565
  ikeConfig?: string;
70378
71566
  /**
70379
71567
  * @remarks
71568
+ * This parameter is supported if you modify the configurations of an IPsec-VPN connection in single-tunnel mode.
71569
+ *
70380
71570
  * The configuration of Phase 2 negotiations:
70381
71571
  *
70382
71572
  * * **IpsecConfig.IpsecEncAlg:** the encryption algorithm that is used in Phase 2 negotiations. Valid values: **aes**, **aes192**, **aes256**, **des**, and **3des**.
70383
71573
  * * **IpsecConfig. IpsecAuthAlg:** the authentication algorithm that is used in Phase 2 negotiations. Valid values: **md5**, **sha1**, **sha256**, **sha384**, and **sha512**.
70384
- * * **IpsecConfig. IpsecPfs:** the DH key exchange algorithm that is used in Phase 2 negotiations. Valid values: **disabled**, **group1**, **group2**, **group5**, and **group14**.
70385
- * * **IpsecConfig. IpsecLifetime**: the SA lifetime determined by Phase 2 negotiations. Unit: seconds. Valid values: **0** to **86400**.
71574
+ * * **IpsecConfig. IpsecPfs:** the Diffie-Hellman key exchange algorithm that is used in Phase 2 negotiations. Valid values: **disabled**, **group1**, **group2**, **group5**, and **group14**.
71575
+ * * **IkeConfig.IkeLifetime**: the SA lifetime determined by Phase 2 negotiations. Unit: seconds. Valid values: **0** to **86400**.
70386
71576
  *
70387
71577
  * @example
70388
71578
  * {"IpsecEncAlg":"aes","IpsecAuthAlg":"sha1","IpsecPfs":"group2","IpsecLifetime":86400}
@@ -70463,6 +71653,11 @@ export declare class ModifyVpnAttachmentAttributeRequest extends $dara.Model {
70463
71653
  resourceOwnerAccount?: string;
70464
71654
  resourceOwnerId?: number;
70465
71655
  /**
71656
+ * @remarks
71657
+ * The tunnel configurations.
71658
+ *
71659
+ * You can specify parameters in the **TunnelOptionsSpecification** array when you modify the configurations of an IPsec-VPN connection in dual-tunnel mode. You can modify the configurations of the two tunnels of the IPsec-VPN connection.
71660
+ *
70466
71661
  * **if can be null:**
70467
71662
  * true
70468
71663
  */
@@ -70523,6 +71718,8 @@ export declare class ModifyVpnAttachmentAttributeResponseBody extends $dara.Mode
70523
71718
  * @remarks
70524
71719
  * The ID of the customer gateway associated with the IPsec-VPN connection.
70525
71720
  *
71721
+ * This parameter is returned only for single-tunnel IPsec-VPN connections.
71722
+ *
70526
71723
  * @example
70527
71724
  * cgw-p0w2jemrcj5u61un8****
70528
71725
  */
@@ -70548,10 +71745,12 @@ export declare class ModifyVpnAttachmentAttributeResponseBody extends $dara.Mode
70548
71745
  effectImmediately?: boolean;
70549
71746
  /**
70550
71747
  * @remarks
70551
- * Indicates whether the DPD feature is enabled for the IPsec-VPN connection. Valid values:
71748
+ * Indicates whether the DPD feature is enabled for the IPsec-VPN connection.
70552
71749
  *
70553
- * * **true**
70554
- * * **false**
71750
+ * * **true**: The feature is enabled.
71751
+ * * **false**: The feature is disabled.
71752
+ *
71753
+ * This parameter is returned only for single-tunnel IPsec-VPN connections.
70555
71754
  *
70556
71755
  * @example
70557
71756
  * true
@@ -70559,29 +71758,47 @@ export declare class ModifyVpnAttachmentAttributeResponseBody extends $dara.Mode
70559
71758
  enableDpd?: boolean;
70560
71759
  /**
70561
71760
  * @remarks
70562
- * Indicates whether NAT traversal is enabled for the IPsec-VPN connection. Valid values:
71761
+ * Specifies whether to enable NAT traversal for the IPsec-VPN connection.
70563
71762
  *
70564
- * * **true**
70565
- * * **false**
71763
+ * * **true**: The feature is enabled.
71764
+ * * **false**: The feature is disabled.
71765
+ *
71766
+ * This parameter is returned only for single-tunnel IPsec-VPN connections.
70566
71767
  *
70567
71768
  * @example
70568
71769
  * true
70569
71770
  */
70570
71771
  enableNatTraversal?: boolean;
71772
+ /**
71773
+ * @remarks
71774
+ * Specifies whether to enable Border Gateway Protocol (BGP) for tunnels.
71775
+ *
71776
+ * * **true**: The feature is enabled.
71777
+ * * **false**: The feature is disabled.
71778
+ *
71779
+ * This parameter is returned only by dual-tunnel IPsec-VPN connections.
71780
+ *
71781
+ * @example
71782
+ * false
71783
+ */
70571
71784
  enableTunnelsBgp?: boolean;
70572
71785
  /**
70573
71786
  * @remarks
70574
71787
  * The configuration of Phase 1 negotiations.
71788
+ *
71789
+ * **IkeConfig** parameters are returned only for single-tunnel IPsec-VPN connections.
70575
71790
  */
70576
71791
  ikeConfig?: ModifyVpnAttachmentAttributeResponseBodyIkeConfig;
70577
71792
  /**
70578
71793
  * @remarks
70579
71794
  * The configuration of Phase 2 negotiations.
71795
+ *
71796
+ * **IpsecConfig** parameters are returned only for single-tunnel IPsec-VPN connections.
70580
71797
  */
70581
71798
  ipsecConfig?: ModifyVpnAttachmentAttributeResponseBodyIpsecConfig;
70582
71799
  /**
70583
71800
  * @remarks
70584
- * The CIDR block of the VPC with which the data center can communicate.
71801
+ * The CIDR block on the Alibaba Cloud side that communicates with the on-premises data center is required, such as CIDR blocks of VPCs.
70585
71802
  *
70586
71803
  * @example
70587
71804
  * 10.1.1.0/24,10.1.2.0/24
@@ -70608,7 +71825,7 @@ export declare class ModifyVpnAttachmentAttributeResponseBody extends $dara.Mode
70608
71825
  networkType?: string;
70609
71826
  /**
70610
71827
  * @remarks
70611
- * The CIDR block of the data center with which the VPC can communicate.
71828
+ * The CIDR block of the on-premises data center that communicates with Alibaba Cloud is required.
70612
71829
  *
70613
71830
  * @example
70614
71831
  * 10.1.3.0/24,10.1.4.0/24
@@ -70655,15 +71872,25 @@ export declare class ModifyVpnAttachmentAttributeResponseBody extends $dara.Mode
70655
71872
  * ike_sa_not_established
70656
71873
  */
70657
71874
  status?: string;
71875
+ /**
71876
+ * @remarks
71877
+ * The tunnel configurations of the IPsec-VPN connection.
71878
+ *
71879
+ * **TunnelOptionsSpecification** parameters are returned only for dual-tunnel IPsec-VPN connections.
71880
+ */
70658
71881
  tunnelOptionsSpecification?: ModifyVpnAttachmentAttributeResponseBodyTunnelOptionsSpecification[];
70659
71882
  /**
70660
71883
  * @remarks
70661
- * The health check configuration of the IPsec-VPN connection.
71884
+ * The health check configurations of the IPsec-VPN connection.
71885
+ *
71886
+ * **VcoHealthCheck** parameters are returned only for single-tunnel IPsec-VPC connections.
70662
71887
  */
70663
71888
  vcoHealthCheck?: ModifyVpnAttachmentAttributeResponseBodyVcoHealthCheck;
70664
71889
  /**
70665
71890
  * @remarks
70666
- * The BGP configuration of the IPsec-VPN connection.
71891
+ * The BGP configurations of the IPsec-VPN connection.
71892
+ *
71893
+ * **VpnBgpConfig** parameters are returned only for single-tunnel IPsec-VPN connections.
70667
71894
  */
70668
71895
  vpnBgpConfig?: ModifyVpnAttachmentAttributeResponseBodyVpnBgpConfig;
70669
71896
  /**
@@ -70676,7 +71903,9 @@ export declare class ModifyVpnAttachmentAttributeResponseBody extends $dara.Mode
70676
71903
  vpnConnectionId?: string;
70677
71904
  /**
70678
71905
  * @remarks
70679
- * The ID of the VPN gateway associated with the IPsec-VPN connection.
71906
+ * The ID of the VPN gateway that is associated with the IPsec-VPN connection.
71907
+ *
71908
+ * **vpn-not-exist**: The IPsec-VPN connection is not associated with a VPN Gateway.
70680
71909
  *
70681
71910
  * @example
70682
71911
  * vpn-p0wa1c1018pmeb6cu****
@@ -70839,9 +72068,7 @@ export declare class ModifyVpnConnectionAttributeRequest extends $dara.Model {
70839
72068
  * * The key cannot contain space characters. The key must be 1 to 100 characters in length, and can contain digits, letters, and the following special characters: ``~!`@#$%^&*()_-+={}[]|;:\\",.<>/?``
70840
72069
  * * If you do not specify a pre-shared key, the system randomly generates a 16-bit string as the pre-shared key. You can call the [DescribeVpnConnection](https://help.aliyun.com/document_detail/2526951.html) operation to query the pre-shared key that is automatically generated by the system.
70841
72070
  *
70842
- * **
70843
- *
70844
- * **Description** The pre-shared key of the IPsec-VPN connection must be the same as the authentication key of the on-premises data center. Otherwise, connections between the on-premises data center and the VPN gateway cannot be established.
72071
+ * > The pre-shared key of the IPsec-VPN connection must be the same as the authentication key of the on-premises data center. Otherwise, connections between the on-premises data center and the VPN gateway cannot be established.
70845
72072
  *
70846
72073
  * * **IkeConfig.IkeVersion**: the version of the Internet Key Exchange (IKE) protocol. Valid values: **ikev1** and **ikev2**.
70847
72074
  *
@@ -71219,9 +72446,9 @@ export declare class ModifyVpnGatewayAttributeRequest extends $dara.Model {
71219
72446
  clientToken?: string;
71220
72447
  /**
71221
72448
  * @remarks
71222
- * The new description of the VPN gateway.
72449
+ * The new description of the VPN connection.
71223
72450
  *
71224
- * The description must be 1 to 100 characters in length and cannot start with `http://` or `https://`.
72451
+ * The description must be 1 to 100 characters in length.
71225
72452
  *
71226
72453
  * @example
71227
72454
  * test
@@ -71368,9 +72595,9 @@ export declare class ModifyVpnGatewayAttributeResponseBody extends $dara.Model {
71368
72595
  internetIp?: string;
71369
72596
  /**
71370
72597
  * @remarks
71371
- * The IP address of the VPN gateway.
72598
+ * The private IP address of the vSwitch that is used by the system when the VPN gateway is deployed.
71372
72599
  *
71373
- * This parameter is returned only when the VPN gateway is a private VPN gateway and supports only the single-tunnel mode.
72600
+ * The parameter is returned only for VPN gateways that support single-tunnel IPsec-VPN connections. The IPsec-VPN feature must be enabled.
71374
72601
  *
71375
72602
  * @example
71376
72603
  * 172.27.30.24
@@ -71394,9 +72621,9 @@ export declare class ModifyVpnGatewayAttributeResponseBody extends $dara.Model {
71394
72621
  requestId?: string;
71395
72622
  /**
71396
72623
  * @remarks
71397
- * VPN网关实例所属的资源组ID。
72624
+ * The ID of the resource group to which the VPN gateway belongs.
71398
72625
  *
71399
- * 您可以调用[ListResourceGroups](https://help.aliyun.com/document_detail/158855.html)接口查询资源组信息。
72626
+ * You can call the [ListResourceGroups](https://help.aliyun.com/document_detail/158855.html) operation to query resource groups.
71400
72627
  *
71401
72628
  * @example
71402
72629
  * rg-acfmzs372yg****
@@ -75023,17 +76250,31 @@ export declare class TerminateVirtualBorderRouterResponse extends $dara.Model {
75023
76250
  }
75024
76251
  export declare class TransformEipSegmentToPublicIpAddressPoolRequest extends $dara.Model {
75025
76252
  /**
76253
+ * @remarks
76254
+ * The client token that is used to ensure the idempotence of the request.
76255
+ *
76256
+ * You can use the client to generate the token, but you must make sure that the token is unique among all requests. The token can contain only ASCII characters.
76257
+ *
76258
+ * > If you do not specify this parameter, the system automatically uses the **request ID** as the **client token**. The **request ID** is different for each request.
76259
+ *
75026
76260
  * @example
75027
76261
  * 02fb3da4-130e-11****
75028
76262
  */
75029
76263
  clientToken?: string;
75030
76264
  /**
76265
+ * @remarks
76266
+ * The description of the IP address pool.
76267
+ *
76268
+ * The description must be 0 to 256 characters in length and cannot start with `http://` or `https://`.
76269
+ *
75031
76270
  * @example
75032
76271
  * AddressPoolDescription
75033
76272
  */
75034
76273
  description?: string;
75035
76274
  /**
75036
76275
  * @remarks
76276
+ * The ID of the contiguous EIP group to be migrated.
76277
+ *
75037
76278
  * This parameter is required.
75038
76279
  *
75039
76280
  * @example
@@ -75041,12 +76282,19 @@ export declare class TransformEipSegmentToPublicIpAddressPoolRequest extends $da
75041
76282
  */
75042
76283
  instanceId?: string;
75043
76284
  /**
76285
+ * @remarks
76286
+ * The name of the IP address pool.
76287
+ *
76288
+ * The name must be 0 to 128 characters in length and cannot start with `http://` or `https://`.
76289
+ *
75044
76290
  * @example
75045
76291
  * AddressPoolName
75046
76292
  */
75047
76293
  name?: string;
75048
76294
  /**
75049
76295
  * @remarks
76296
+ * The ID of the region to which the contiguous EIP group belongs. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/36063.html) operation to query the most recent region list.
76297
+ *
75050
76298
  * This parameter is required.
75051
76299
  *
75052
76300
  * @example
@@ -75054,6 +76302,9 @@ export declare class TransformEipSegmentToPublicIpAddressPoolRequest extends $da
75054
76302
  */
75055
76303
  regionId?: string;
75056
76304
  /**
76305
+ * @remarks
76306
+ * The ID of the resource group to which the address pool belongs.
76307
+ *
75057
76308
  * @example
75058
76309
  * rg-acfmxazb4pcdvf****
75059
76310
  */
@@ -75071,16 +76322,25 @@ export declare class TransformEipSegmentToPublicIpAddressPoolRequest extends $da
75071
76322
  }
75072
76323
  export declare class TransformEipSegmentToPublicIpAddressPoolResponseBody extends $dara.Model {
75073
76324
  /**
76325
+ * @remarks
76326
+ * The ID of the IP address pool.
76327
+ *
75074
76328
  * @example
75075
76329
  * pippool-6wetvn6fumkgycssx****
75076
76330
  */
75077
76331
  publicIpAddressPoolId?: string;
75078
76332
  /**
76333
+ * @remarks
76334
+ * The request ID.
76335
+ *
75079
76336
  * @example
75080
76337
  * 4EC47282-1B74-4534-BD0E-403F3EE64CAF
75081
76338
  */
75082
76339
  requestId?: string;
75083
76340
  /**
76341
+ * @remarks
76342
+ * The ID of the resource group to which the IP address pool belongs.
76343
+ *
75084
76344
  * @example
75085
76345
  * rg-acfmxazb4pcdvf****
75086
76346
  */
@@ -76614,11 +77874,11 @@ export declare class UpdateIpsecServerRequest extends $dara.Model {
76614
77874
  * @remarks
76615
77875
  * The pre-shared key.
76616
77876
  *
76617
- * The pre-shared key that is used for authentication between the IPsec-VPN server and the client. It must be 1 to 100 characters in length.
77877
+ * The pre-shared key that is used for authentication between the IPsec server and the client. The key must be 1 to 100 characters in length.
76618
77878
  *
76619
77879
  * You can call [ListIpsecServers](https://help.aliyun.com/document_detail/2794120.html) to query keys generated by the system.
76620
77880
  *
76621
- * > The pre-shared key of the IPsec server key must be the same as that of the client. Otherwise, the connection between the IPsec server and the client cannot be established.
77881
+ * > The pre-shared key of the IPsec server key must be the same as that of the client. Otherwise, the connection between the IPsec server and the client cannot be established.
76622
77882
  *
76623
77883
  * @example
76624
77884
  * Cfd123****
@@ -78527,7 +79787,8 @@ export default class Client extends OpenApi {
78527
79787
  * Default IPv6 gateways support only private communication. You can call the AllocateIpv6InternetBandwidth operation to purchase Internet bandwidth resources for an IPv6 address. This way, ECS instances in a VPC can access the Internet through the IPv6 address. IPv6 clients can also access the ECS instances over the Internet.
78528
79788
  *
78529
79789
  * @remarks
78530
- * You cannot repeatedly call the **AllocateIpv6InternetBandwidth** operation within a specific time period.
79790
+ * Before you call this operation, make sure that an ECS instance that supports IPv6 is created in a VPC that has an IPv6 CIDR block. For more information, see [Create a VPC with an IPv6 CIDR block](https://help.aliyun.com/document_detail/100540.html).
79791
+ * * You cannot repeatedly call **AllocateIpv6InternetBandwidth** within the specified period of time.
78531
79792
  *
78532
79793
  * @param request - AllocateIpv6InternetBandwidthRequest
78533
79794
  * @param runtime - runtime options for this request RuntimeOptions
@@ -78538,7 +79799,8 @@ export default class Client extends OpenApi {
78538
79799
  * Default IPv6 gateways support only private communication. You can call the AllocateIpv6InternetBandwidth operation to purchase Internet bandwidth resources for an IPv6 address. This way, ECS instances in a VPC can access the Internet through the IPv6 address. IPv6 clients can also access the ECS instances over the Internet.
78539
79800
  *
78540
79801
  * @remarks
78541
- * You cannot repeatedly call the **AllocateIpv6InternetBandwidth** operation within a specific time period.
79802
+ * Before you call this operation, make sure that an ECS instance that supports IPv6 is created in a VPC that has an IPv6 CIDR block. For more information, see [Create a VPC with an IPv6 CIDR block](https://help.aliyun.com/document_detail/100540.html).
79803
+ * * You cannot repeatedly call **AllocateIpv6InternetBandwidth** within the specified period of time.
78542
79804
  *
78543
79805
  * @param request - AllocateIpv6InternetBandwidthRequest
78544
79806
  * @returns AllocateIpv6InternetBandwidthResponse
@@ -80139,7 +81401,10 @@ export default class Client extends OpenApi {
80139
81401
  */
80140
81402
  createSnatEntry(request: CreateSnatEntryRequest): Promise<CreateSnatEntryResponse>;
80141
81403
  /**
80142
- * 创建SSL-VPN客户端证书
81404
+ * Creates an SSL client certificate.
81405
+ *
81406
+ * @remarks
81407
+ * Before you create an SSL client certificate, make sure that an SSL server is created on the VPN gateway. For more information, see [CreateSslVpnServer](https://help.aliyun.com/document_detail/2794075.html).
80143
81408
  *
80144
81409
  * @param request - CreateSslVpnClientCertRequest
80145
81410
  * @param runtime - runtime options for this request RuntimeOptions
@@ -80147,7 +81412,10 @@ export default class Client extends OpenApi {
80147
81412
  */
80148
81413
  createSslVpnClientCertWithOptions(request: CreateSslVpnClientCertRequest, runtime: $dara.RuntimeOptions): Promise<CreateSslVpnClientCertResponse>;
80149
81414
  /**
80150
- * 创建SSL-VPN客户端证书
81415
+ * Creates an SSL client certificate.
81416
+ *
81417
+ * @remarks
81418
+ * Before you create an SSL client certificate, make sure that an SSL server is created on the VPN gateway. For more information, see [CreateSslVpnServer](https://help.aliyun.com/document_detail/2794075.html).
80151
81419
  *
80152
81420
  * @param request - CreateSslVpnClientCertRequest
80153
81421
  * @returns CreateSslVpnClientCertResponse
@@ -80555,9 +81823,12 @@ export default class Client extends OpenApi {
80555
81823
  * Creates an IPsec-VPN connection. After you create the IPsec-VPN connection, you can associate the IPsec-VPN connection with a transit router.
80556
81824
  *
80557
81825
  * @remarks
80558
- * By default, an IPsec-VPN connection created by calling the `CreateVpnAttachment` operation is not associated with a resource. You can associate an IPsec-VPN connection with a transit router by calling the [CreateTransitRouterVpnAttachment](https://help.aliyun.com/document_detail/443993.html) operation.
81826
+ * By default, the IPsec-VPN connection created by calling the `CreateVpnAttachment` operation is not bound to any resources. You can call the [CreateTransitRouterVpnAttachment](https://help.aliyun.com/document_detail/443993.html) operation to bind the IPsec-VPN connection to a transit router.
81827
+ * * If you want to associate an IPsec-VPN connection with a transit router, you can create a dual-tunnel connection in some regions. For more information, see [Dual-tunnel IPsec-VPN connections](https://help.aliyun.com/document_detail/2853535.html).
81828
+ * * When you create a IPsec-VPN connection in dual tunnel mode, you can configure the following request parameters in addition to the required parameters: **ClientToken**, **Name**, **NetworkType**, **EffectImmediately**, **AutoConfigRoute**, **Tags** array, **ResourceGroupId**, **TunnelOptionsSpecification** array, and **EnableTunnelsBgp**.
81829
+ * * When you create a IPsec-VPN connection in single tunnel mode, you can configure the following request parameters in addition to the required parameters: **ClientToken**, **CustomerGatewayId**, **NetworkType**, **Name**, **EffectImmediately**, **IkeConfig**, **IpsecConfig**, **HealthCheckConfig**, **AutoConfigRoute**, **EnableDpd**, **EnableNatTraversal**, **BgpConfig**, **Tags** array, and **ResourceGroupId**.
80559
81830
  * ### [](#)Prerequisites
80560
- * Before you create an IPsec-VPN connection, make sure that you created a customer gateway in the region where you want to create the IPsec-VPN connection. For more information, see [CreateCustomerGateway](https://help.aliyun.com/document_detail/120368.html).
81831
+ * Before you create an IPsec-VPN connection, you must create a customer gateway in the region where you want to create the IPsec-VPN connection. For more information, see [CreateCustomerGateway](https://help.aliyun.com/document_detail/120368.html).
80561
81832
  * If you want to add BGP configurations to an IPsec-VPN connection, make sure that an autonomous system number (ASN) is assigned to the customer gateway.
80562
81833
  *
80563
81834
  * @param request - CreateVpnAttachmentRequest
@@ -80569,9 +81840,12 @@ export default class Client extends OpenApi {
80569
81840
  * Creates an IPsec-VPN connection. After you create the IPsec-VPN connection, you can associate the IPsec-VPN connection with a transit router.
80570
81841
  *
80571
81842
  * @remarks
80572
- * By default, an IPsec-VPN connection created by calling the `CreateVpnAttachment` operation is not associated with a resource. You can associate an IPsec-VPN connection with a transit router by calling the [CreateTransitRouterVpnAttachment](https://help.aliyun.com/document_detail/443993.html) operation.
81843
+ * By default, the IPsec-VPN connection created by calling the `CreateVpnAttachment` operation is not bound to any resources. You can call the [CreateTransitRouterVpnAttachment](https://help.aliyun.com/document_detail/443993.html) operation to bind the IPsec-VPN connection to a transit router.
81844
+ * * If you want to associate an IPsec-VPN connection with a transit router, you can create a dual-tunnel connection in some regions. For more information, see [Dual-tunnel IPsec-VPN connections](https://help.aliyun.com/document_detail/2853535.html).
81845
+ * * When you create a IPsec-VPN connection in dual tunnel mode, you can configure the following request parameters in addition to the required parameters: **ClientToken**, **Name**, **NetworkType**, **EffectImmediately**, **AutoConfigRoute**, **Tags** array, **ResourceGroupId**, **TunnelOptionsSpecification** array, and **EnableTunnelsBgp**.
81846
+ * * When you create a IPsec-VPN connection in single tunnel mode, you can configure the following request parameters in addition to the required parameters: **ClientToken**, **CustomerGatewayId**, **NetworkType**, **Name**, **EffectImmediately**, **IkeConfig**, **IpsecConfig**, **HealthCheckConfig**, **AutoConfigRoute**, **EnableDpd**, **EnableNatTraversal**, **BgpConfig**, **Tags** array, and **ResourceGroupId**.
80573
81847
  * ### [](#)Prerequisites
80574
- * Before you create an IPsec-VPN connection, make sure that you created a customer gateway in the region where you want to create the IPsec-VPN connection. For more information, see [CreateCustomerGateway](https://help.aliyun.com/document_detail/120368.html).
81848
+ * Before you create an IPsec-VPN connection, you must create a customer gateway in the region where you want to create the IPsec-VPN connection. For more information, see [CreateCustomerGateway](https://help.aliyun.com/document_detail/120368.html).
80575
81849
  * If you want to add BGP configurations to an IPsec-VPN connection, make sure that an autonomous system number (ASN) is assigned to the customer gateway.
80576
81850
  *
80577
81851
  * @param request - CreateVpnAttachmentRequest
@@ -81133,9 +82407,9 @@ export default class Client extends OpenApi {
81133
82407
  *
81134
82408
  * @remarks
81135
82409
  * **DeleteIpsecServer** is an asynchronous operation. After a request is sent, the system returns a request ID and runs the task in the background. You can call [DescribeVpnGateway](https://help.aliyun.com/document_detail/2794055.html) to query the status of the task.
81136
- * * If a VPN gateway is in the **updating** state, the IPsec server is being deleted.
81137
- * * If a VPN gateway is in the **active** state, the IPsec server is deleted.
81138
- * * You cannot repeatedly call **DeleteIpsecServer** to delete an IPsec server from a VPN gateway within the specified period of time.
82410
+ * * If the VPN gateway is in the **updating** state, the IPsec server is being deleted.
82411
+ * * If the VPN gateway is in the **active** state, the IPsec server is deleted.
82412
+ * * You cannot call **DeleteIpsecServer** within the specified period of time.
81139
82413
  *
81140
82414
  * @param request - DeleteIpsecServerRequest
81141
82415
  * @param runtime - runtime options for this request RuntimeOptions
@@ -81147,9 +82421,9 @@ export default class Client extends OpenApi {
81147
82421
  *
81148
82422
  * @remarks
81149
82423
  * **DeleteIpsecServer** is an asynchronous operation. After a request is sent, the system returns a request ID and runs the task in the background. You can call [DescribeVpnGateway](https://help.aliyun.com/document_detail/2794055.html) to query the status of the task.
81150
- * * If a VPN gateway is in the **updating** state, the IPsec server is being deleted.
81151
- * * If a VPN gateway is in the **active** state, the IPsec server is deleted.
81152
- * * You cannot repeatedly call **DeleteIpsecServer** to delete an IPsec server from a VPN gateway within the specified period of time.
82424
+ * * If the VPN gateway is in the **updating** state, the IPsec server is being deleted.
82425
+ * * If the VPN gateway is in the **active** state, the IPsec server is deleted.
82426
+ * * You cannot call **DeleteIpsecServer** within the specified period of time.
81153
82427
  *
81154
82428
  * @param request - DeleteIpsecServerRequest
81155
82429
  * @returns DeleteIpsecServerResponse
@@ -81605,10 +82879,14 @@ export default class Client extends OpenApi {
81605
82879
  * Deletes an SSL client certificate.
81606
82880
  *
81607
82881
  * @remarks
81608
- * **DeleteSslVpnClientCert** is an asynchronous operation. After a request is sent, the system returns a request ID and runs the task in the background. You can call [DescribeVpnGateway](https://help.aliyun.com/document_detail/73720.html) to query the status of the task.
82882
+ * If you delete an SSL client certificate, all SSL-VPN client connections to the SSL server are disconnected. You need to reinitiate connections from SSL clients.
82883
+ * For example, SSL client certificate 1 and SSL client certificate 2 are created on an SSL server. After you delete certificate 1, all client connections associated with certificate 1 and certificate 2 are disconnected from the SSL server.
82884
+ * * If clients associated with certificate 1 require SSL-VPN connections, you need to install other certificates on the clients and reinitiate connections from the clients.
82885
+ * * If clients associated with certificate 2 require SSL-VPN connections, you can directly reinitiate connections from the clients.
82886
+ * * **DeleteSslVpnClientCert** is an asynchronous operation. After a request is sent, the system returns a request ID and runs the task in the background. You can call the [DescribeVpnGateway](https://help.aliyun.com/document_detail/2794055.html) operation to query the status of the task.
81609
82887
  * * If the VPN gateway is in the **updating** state, the SSL client certificate is being deleted.
81610
82888
  * * If the VPN gateway is in the **active** state, the SSL client certificate is deleted.
81611
- * * You cannot repeatedly call **DeleteSslVpnClientCert** to delete an SSL client certificate from the same VPN gateway within the specified period of time.
82889
+ * * You cannot call **DeleteSslVpnClientCert** within the specified period of time.
81612
82890
  *
81613
82891
  * @param request - DeleteSslVpnClientCertRequest
81614
82892
  * @param runtime - runtime options for this request RuntimeOptions
@@ -81619,10 +82897,14 @@ export default class Client extends OpenApi {
81619
82897
  * Deletes an SSL client certificate.
81620
82898
  *
81621
82899
  * @remarks
81622
- * **DeleteSslVpnClientCert** is an asynchronous operation. After a request is sent, the system returns a request ID and runs the task in the background. You can call [DescribeVpnGateway](https://help.aliyun.com/document_detail/73720.html) to query the status of the task.
82900
+ * If you delete an SSL client certificate, all SSL-VPN client connections to the SSL server are disconnected. You need to reinitiate connections from SSL clients.
82901
+ * For example, SSL client certificate 1 and SSL client certificate 2 are created on an SSL server. After you delete certificate 1, all client connections associated with certificate 1 and certificate 2 are disconnected from the SSL server.
82902
+ * * If clients associated with certificate 1 require SSL-VPN connections, you need to install other certificates on the clients and reinitiate connections from the clients.
82903
+ * * If clients associated with certificate 2 require SSL-VPN connections, you can directly reinitiate connections from the clients.
82904
+ * * **DeleteSslVpnClientCert** is an asynchronous operation. After a request is sent, the system returns a request ID and runs the task in the background. You can call the [DescribeVpnGateway](https://help.aliyun.com/document_detail/2794055.html) operation to query the status of the task.
81623
82905
  * * If the VPN gateway is in the **updating** state, the SSL client certificate is being deleted.
81624
82906
  * * If the VPN gateway is in the **active** state, the SSL client certificate is deleted.
81625
- * * You cannot repeatedly call **DeleteSslVpnClientCert** to delete an SSL client certificate from the same VPN gateway within the specified period of time.
82907
+ * * You cannot call **DeleteSslVpnClientCert** within the specified period of time.
81626
82908
  *
81627
82909
  * @param request - DeleteSslVpnClientCertRequest
81628
82910
  * @returns DeleteSslVpnClientCertResponse
@@ -82552,7 +83834,7 @@ export default class Client extends OpenApi {
82552
83834
  */
82553
83835
  describeIpv6Addresses(request: DescribeIpv6AddressesRequest): Promise<DescribeIpv6AddressesResponse>;
82554
83836
  /**
82555
- * 查询创建的仅主动出规则。
83837
+ * Queries egress-only rules.
82556
83838
  *
82557
83839
  * @param request - DescribeIpv6EgressOnlyRulesRequest
82558
83840
  * @param runtime - runtime options for this request RuntimeOptions
@@ -82560,7 +83842,7 @@ export default class Client extends OpenApi {
82560
83842
  */
82561
83843
  describeIpv6EgressOnlyRulesWithOptions(request: DescribeIpv6EgressOnlyRulesRequest, runtime: $dara.RuntimeOptions): Promise<DescribeIpv6EgressOnlyRulesResponse>;
82562
83844
  /**
82563
- * 查询创建的仅主动出规则。
83845
+ * Queries egress-only rules.
82564
83846
  *
82565
83847
  * @param request - DescribeIpv6EgressOnlyRulesRequest
82566
83848
  * @returns DescribeIpv6EgressOnlyRulesResponse
@@ -83206,7 +84488,7 @@ export default class Client extends OpenApi {
83206
84488
  */
83207
84489
  describeVpnGateway(request: DescribeVpnGatewayRequest): Promise<DescribeVpnGatewayResponse>;
83208
84490
  /**
83209
- * 基于地域查询可以创建双隧道VPN与IPSec连接(CEN)的可用区
84491
+ * Queries zones that support IPsec-VPN connections in a region.
83210
84492
  *
83211
84493
  * @param request - DescribeVpnGatewayAvailableZonesRequest
83212
84494
  * @param runtime - runtime options for this request RuntimeOptions
@@ -83214,7 +84496,7 @@ export default class Client extends OpenApi {
83214
84496
  */
83215
84497
  describeVpnGatewayAvailableZonesWithOptions(request: DescribeVpnGatewayAvailableZonesRequest, runtime: $dara.RuntimeOptions): Promise<DescribeVpnGatewayAvailableZonesResponse>;
83216
84498
  /**
83217
- * 基于地域查询可以创建双隧道VPN与IPSec连接(CEN)的可用区
84499
+ * Queries zones that support IPsec-VPN connections in a region.
83218
84500
  *
83219
84501
  * @param request - DescribeVpnGatewayAvailableZonesRequest
83220
84502
  * @returns DescribeVpnGatewayAvailableZonesResponse
@@ -83266,12 +84548,16 @@ export default class Client extends OpenApi {
83266
84548
  */
83267
84549
  describeVpnRouteEntries(request: DescribeVpnRouteEntriesRequest): Promise<DescribeVpnRouteEntriesResponse>;
83268
84550
  /**
84551
+ * Queries the log entries of an SSL server.
84552
+ *
83269
84553
  * @param request - DescribeVpnSslServerLogsRequest
83270
84554
  * @param runtime - runtime options for this request RuntimeOptions
83271
84555
  * @returns DescribeVpnSslServerLogsResponse
83272
84556
  */
83273
84557
  describeVpnSslServerLogsWithOptions(request: DescribeVpnSslServerLogsRequest, runtime: $dara.RuntimeOptions): Promise<DescribeVpnSslServerLogsResponse>;
83274
84558
  /**
84559
+ * Queries the log entries of an SSL server.
84560
+ *
83275
84561
  * @param request - DescribeVpnSslServerLogsRequest
83276
84562
  * @returns DescribeVpnSslServerLogsResponse
83277
84563
  */
@@ -83349,7 +84635,7 @@ export default class Client extends OpenApi {
83349
84635
  * Diagnoses a VPN gateway.
83350
84636
  *
83351
84637
  * @remarks
83352
- * Only VPN gateways in specific regions support the quick diagnostics feature. For more information about the supported regions, see [Supported regions](https://help.aliyun.com/document_detail/430697.html).
84638
+ * VPN网关发起诊断
83353
84639
  *
83354
84640
  * @param request - DiagnoseVpnGatewayRequest
83355
84641
  * @param runtime - runtime options for this request RuntimeOptions
@@ -83360,7 +84646,7 @@ export default class Client extends OpenApi {
83360
84646
  * Diagnoses a VPN gateway.
83361
84647
  *
83362
84648
  * @remarks
83363
- * Only VPN gateways in specific regions support the quick diagnostics feature. For more information about the supported regions, see [Supported regions](https://help.aliyun.com/document_detail/430697.html).
84649
+ * VPN网关发起诊断
83364
84650
  *
83365
84651
  * @param request - DiagnoseVpnGatewayRequest
83366
84652
  * @returns DiagnoseVpnGatewayResponse
@@ -83920,12 +85206,16 @@ export default class Client extends OpenApi {
83920
85206
  */
83921
85207
  listGeographicSubRegions(): Promise<ListGeographicSubRegionsResponse>;
83922
85208
  /**
85209
+ * Queries the logs of an IPsec server.
85210
+ *
83923
85211
  * @param request - ListIpsecServerLogsRequest
83924
85212
  * @param runtime - runtime options for this request RuntimeOptions
83925
85213
  * @returns ListIpsecServerLogsResponse
83926
85214
  */
83927
85215
  listIpsecServerLogsWithOptions(request: ListIpsecServerLogsRequest, runtime: $dara.RuntimeOptions): Promise<ListIpsecServerLogsResponse>;
83928
85216
  /**
85217
+ * Queries the logs of an IPsec server.
85218
+ *
83929
85219
  * @param request - ListIpsecServerLogsRequest
83930
85220
  * @returns ListIpsecServerLogsResponse
83931
85221
  */
@@ -84372,6 +85662,21 @@ export default class Client extends OpenApi {
84372
85662
  * @returns ModifyEipAddressAttributeResponse
84373
85663
  */
84374
85664
  modifyEipAddressAttribute(request: ModifyEipAddressAttributeRequest): Promise<ModifyEipAddressAttributeResponse>;
85665
+ /**
85666
+ * Modifies the EIP forwarding mode.
85667
+ *
85668
+ * @param request - ModifyEipForwardModeRequest
85669
+ * @param runtime - runtime options for this request RuntimeOptions
85670
+ * @returns ModifyEipForwardModeResponse
85671
+ */
85672
+ modifyEipForwardModeWithOptions(request: ModifyEipForwardModeRequest, runtime: $dara.RuntimeOptions): Promise<ModifyEipForwardModeResponse>;
85673
+ /**
85674
+ * Modifies the EIP forwarding mode.
85675
+ *
85676
+ * @param request - ModifyEipForwardModeRequest
85677
+ * @returns ModifyEipForwardModeResponse
85678
+ */
85679
+ modifyEipForwardMode(request: ModifyEipForwardModeRequest): Promise<ModifyEipForwardModeResponse>;
84375
85680
  /**
84376
85681
  * Modifies the configuration of an Express Cloud Connect (ECC) instance.
84377
85682
  *
@@ -84699,7 +86004,7 @@ export default class Client extends OpenApi {
84699
86004
  */
84700
86005
  modifyIpv6GatewayAttribute(request: ModifyIpv6GatewayAttributeRequest): Promise<ModifyIpv6GatewayAttributeResponse>;
84701
86006
  /**
84702
- * Modifies the Internet bandwidth value of an IPv6 address.
86007
+ * Modifies the Internet bandwidth of an IPv6 address.
84703
86008
  *
84704
86009
  * @remarks
84705
86010
  * You cannot repeatedly call the **ModifyIpv6InternetBandwidth** operation to modify the Internet bandwidth value of an IPv6 CIDR block within the specified period of time.
@@ -84710,7 +86015,7 @@ export default class Client extends OpenApi {
84710
86015
  */
84711
86016
  modifyIpv6InternetBandwidthWithOptions(request: ModifyIpv6InternetBandwidthRequest, runtime: $dara.RuntimeOptions): Promise<ModifyIpv6InternetBandwidthResponse>;
84712
86017
  /**
84713
- * Modifies the Internet bandwidth value of an IPv6 address.
86018
+ * Modifies the Internet bandwidth of an IPv6 address.
84714
86019
  *
84715
86020
  * @remarks
84716
86021
  * You cannot repeatedly call the **ModifyIpv6InternetBandwidth** operation to modify the Internet bandwidth value of an IPv6 CIDR block within the specified period of time.
@@ -85222,13 +86527,13 @@ export default class Client extends OpenApi {
85222
86527
  * Modifies the configuration of an IPsec-VPN connection.
85223
86528
  *
85224
86529
  * @remarks
85225
- * **ModifyVpnAttachmentAttribute** is an asynchronous operation. After a request is sent, the system returns a request ID and runs the task to modify the configuration of an IPsec-VPN connection in the background. You can call the [DescribeVpnConnection](https://help.aliyun.com/document_detail/53046.html) operation to query the status of the task.
85226
- * * If the IPsec-VPN connection is in the **updating** state, the configuration of the IPsec-VPN connection is being modified.
85227
- * * If the IPsec-VPN connection is in the **attached** state, the configuration of the IPsec-VPN connection is modified.
85228
- * * You cannot call the **ModifyVpnAttachmentAttribute** operation again on the same IPsec-VPN connection before the previous operation is complete.
85229
- * * When you call the **ModifyVpnAttachmentAttribute** operation, take note of the following items:
85230
- * * If the IPsec-VPN connection is associated with a transit router, you cannot change the type of the gateway connected to the IPsec-VPN connection.
85231
- * * If the IPsec-VPN connection is not associated with a resource, you cannot change the type of the gateway connected to the IPsec-VPN connection or the customer gateway connected to the IPsec-VPN connection.
86530
+ * When you modify a IPsec-VPN connection in dual-tunnel mode, you can configure the following parameters in addition to the required request parameters: **ClientToken**, **Name**, **LocalSubnet**, **RemoteSubnet**, **EffectImmediately**, **AutoConfigRoute**, **TunnelOptionsSpecification** array, and **EnableTunnelsBgp**.
86531
+ * * When you modify a IPsec-VPN connection in single tunnel mode, you can configure the following parameters in addition to the required request parameters: **ClientToken**, **Name**, **LocalSubnet**, **RemoteSubnet**, **EffectImmediately**, **IkeConfig**, **IpsecConfig**, **HealthCheckConfig**, **AutoConfigRoute**, **EnableDpd**, **EnableNatTraversal**, **BgpConfig**, and **CustomerGatewayId**.
86532
+ * * **ModifyVpnAttachmentAttribute** is an asynchronous operation. After a request is sent, the system returns a request ID and runs the task in the background. You can call the [DescribeVpnConnection](https://help.aliyun.com/document_detail/53046.html) operation to query the status of the task:
86533
+ * * If the IPsec-VPN connection is in the **updating** state, the IPsec-VPN connection is being modified.
86534
+ * * If the IPsec-VPN connection is in the **attached** state, the IPsec-VPN connection is modified.
86535
+ * * You cannot concurrently call **ModifyVpnAttachmentAttribute** within the specified period of time.
86536
+ * * You cannot call **ModifyVpnAttachmentAttribute** to modify the gateway type of an IPsec-VPN connection.
85232
86537
  *
85233
86538
  * @param request - ModifyVpnAttachmentAttributeRequest
85234
86539
  * @param runtime - runtime options for this request RuntimeOptions
@@ -85239,13 +86544,13 @@ export default class Client extends OpenApi {
85239
86544
  * Modifies the configuration of an IPsec-VPN connection.
85240
86545
  *
85241
86546
  * @remarks
85242
- * **ModifyVpnAttachmentAttribute** is an asynchronous operation. After a request is sent, the system returns a request ID and runs the task to modify the configuration of an IPsec-VPN connection in the background. You can call the [DescribeVpnConnection](https://help.aliyun.com/document_detail/53046.html) operation to query the status of the task.
85243
- * * If the IPsec-VPN connection is in the **updating** state, the configuration of the IPsec-VPN connection is being modified.
85244
- * * If the IPsec-VPN connection is in the **attached** state, the configuration of the IPsec-VPN connection is modified.
85245
- * * You cannot call the **ModifyVpnAttachmentAttribute** operation again on the same IPsec-VPN connection before the previous operation is complete.
85246
- * * When you call the **ModifyVpnAttachmentAttribute** operation, take note of the following items:
85247
- * * If the IPsec-VPN connection is associated with a transit router, you cannot change the type of the gateway connected to the IPsec-VPN connection.
85248
- * * If the IPsec-VPN connection is not associated with a resource, you cannot change the type of the gateway connected to the IPsec-VPN connection or the customer gateway connected to the IPsec-VPN connection.
86547
+ * When you modify a IPsec-VPN connection in dual-tunnel mode, you can configure the following parameters in addition to the required request parameters: **ClientToken**, **Name**, **LocalSubnet**, **RemoteSubnet**, **EffectImmediately**, **AutoConfigRoute**, **TunnelOptionsSpecification** array, and **EnableTunnelsBgp**.
86548
+ * * When you modify a IPsec-VPN connection in single tunnel mode, you can configure the following parameters in addition to the required request parameters: **ClientToken**, **Name**, **LocalSubnet**, **RemoteSubnet**, **EffectImmediately**, **IkeConfig**, **IpsecConfig**, **HealthCheckConfig**, **AutoConfigRoute**, **EnableDpd**, **EnableNatTraversal**, **BgpConfig**, and **CustomerGatewayId**.
86549
+ * * **ModifyVpnAttachmentAttribute** is an asynchronous operation. After a request is sent, the system returns a request ID and runs the task in the background. You can call the [DescribeVpnConnection](https://help.aliyun.com/document_detail/53046.html) operation to query the status of the task:
86550
+ * * If the IPsec-VPN connection is in the **updating** state, the IPsec-VPN connection is being modified.
86551
+ * * If the IPsec-VPN connection is in the **attached** state, the IPsec-VPN connection is modified.
86552
+ * * You cannot concurrently call **ModifyVpnAttachmentAttribute** within the specified period of time.
86553
+ * * You cannot call **ModifyVpnAttachmentAttribute** to modify the gateway type of an IPsec-VPN connection.
85249
86554
  *
85250
86555
  * @param request - ModifyVpnAttachmentAttributeRequest
85251
86556
  * @returns ModifyVpnAttachmentAttributeResponse
@@ -86051,7 +87356,7 @@ export default class Client extends OpenApi {
86051
87356
  */
86052
87357
  terminateVirtualBorderRouter(request: TerminateVirtualBorderRouterRequest): Promise<TerminateVirtualBorderRouterResponse>;
86053
87358
  /**
86054
- * 连续EIP组转换为公网IP地址池
87359
+ * Migrate contiguous EIP groups to IP address pool by calling TransformEipSegmentToPublicIpAddressPool.
86055
87360
  *
86056
87361
  * @param request - TransformEipSegmentToPublicIpAddressPoolRequest
86057
87362
  * @param runtime - runtime options for this request RuntimeOptions
@@ -86059,7 +87364,7 @@ export default class Client extends OpenApi {
86059
87364
  */
86060
87365
  transformEipSegmentToPublicIpAddressPoolWithOptions(request: TransformEipSegmentToPublicIpAddressPoolRequest, runtime: $dara.RuntimeOptions): Promise<TransformEipSegmentToPublicIpAddressPoolResponse>;
86061
87366
  /**
86062
- * 连续EIP组转换为公网IP地址池
87367
+ * Migrate contiguous EIP groups to IP address pool by calling TransformEipSegmentToPublicIpAddressPool.
86063
87368
  *
86064
87369
  * @param request - TransformEipSegmentToPublicIpAddressPoolRequest
86065
87370
  * @returns TransformEipSegmentToPublicIpAddressPoolResponse
@@ -86317,11 +87622,11 @@ export default class Client extends OpenApi {
86317
87622
  * Modifies the configuration of an IPsec server.
86318
87623
  *
86319
87624
  * @remarks
86320
- * If you modify only the **IpsecServerName** parameter, this operation is synchronous. If you modify parameters other than **IpsecServerName**, this operation is asynchronous.
86321
- * * When the **UpdateIpsecServer** operation is asynchronous, the system returns a request ID after you send a request to call this operation and the IPsec server is being modified in the backend. You can call [DescribeVpnGateway](https://help.aliyun.com/document_detail/2794055.html) to query the status of a VPN gateway.
86322
- * * If the VPN gateway is in the **updating** state, the configuration of the IPsec server is being modified.
86323
- * * If the VPN gateway is in the **active** state, the configuration of the IPsec server is modified.
86324
- * * You cannot repeatedly call the **UpdateIpsecServer** operation for the same VPN gateway within the specified period of time.
87625
+ * If you modify only **IpsecServerName** of the IPsec server, this operation is synchronous. If you modify other parameters besides **IpsecServerName**, this operation is asynchronous.
87626
+ * * If **UpdateIpsecServer** is an asynchronous operation, after a request is sent, the system returns a request ID and runs the task in the background. You can call the [DescribeVpnGateway](https://help.aliyun.com/document_detail/2794055.html) operation to query the status of the task.
87627
+ * * If the VPN gateway is in the **updating** state, the IPsec server is being modified.
87628
+ * * If the VPN gateway is in the **active** state, the IPsec server is modified.
87629
+ * * You cannot repeatedly call **UpdateIpsecServer** within the specified period of time.
86325
87630
  *
86326
87631
  * @param request - UpdateIpsecServerRequest
86327
87632
  * @param runtime - runtime options for this request RuntimeOptions
@@ -86332,11 +87637,11 @@ export default class Client extends OpenApi {
86332
87637
  * Modifies the configuration of an IPsec server.
86333
87638
  *
86334
87639
  * @remarks
86335
- * If you modify only the **IpsecServerName** parameter, this operation is synchronous. If you modify parameters other than **IpsecServerName**, this operation is asynchronous.
86336
- * * When the **UpdateIpsecServer** operation is asynchronous, the system returns a request ID after you send a request to call this operation and the IPsec server is being modified in the backend. You can call [DescribeVpnGateway](https://help.aliyun.com/document_detail/2794055.html) to query the status of a VPN gateway.
86337
- * * If the VPN gateway is in the **updating** state, the configuration of the IPsec server is being modified.
86338
- * * If the VPN gateway is in the **active** state, the configuration of the IPsec server is modified.
86339
- * * You cannot repeatedly call the **UpdateIpsecServer** operation for the same VPN gateway within the specified period of time.
87640
+ * If you modify only **IpsecServerName** of the IPsec server, this operation is synchronous. If you modify other parameters besides **IpsecServerName**, this operation is asynchronous.
87641
+ * * If **UpdateIpsecServer** is an asynchronous operation, after a request is sent, the system returns a request ID and runs the task in the background. You can call the [DescribeVpnGateway](https://help.aliyun.com/document_detail/2794055.html) operation to query the status of the task.
87642
+ * * If the VPN gateway is in the **updating** state, the IPsec server is being modified.
87643
+ * * If the VPN gateway is in the **active** state, the IPsec server is modified.
87644
+ * * You cannot repeatedly call **UpdateIpsecServer** within the specified period of time.
86340
87645
  *
86341
87646
  * @param request - UpdateIpsecServerRequest
86342
87647
  * @returns UpdateIpsecServerResponse