@alicloud/vpc20160428 6.7.2 → 6.7.3

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
package/dist/client.d.ts CHANGED
@@ -2121,8 +2121,33 @@ export declare class CreateVpnAttachmentRequestTags extends $dara.Model {
2121
2121
  });
2122
2122
  }
2123
2123
  export declare class CreateVpnAttachmentRequestTunnelOptionsSpecificationTunnelBgpConfig extends $dara.Model {
2124
+ /**
2125
+ * @remarks
2126
+ * The ANS of the tunnel on the Alibaba Cloud side. Valid values: **1** to **4294967295**. Default value: **45104**.
2127
+ *
2128
+ * > We recommend that you use a private ASN to establish BGP connections to Alibaba Cloud. Refer to the relevant documentation for the private ASN range.
2129
+ *
2130
+ * @example
2131
+ * 65530
2132
+ */
2124
2133
  localAsn?: number;
2134
+ /**
2135
+ * @remarks
2136
+ * The BGP IP address of the tunnel on the Alibaba Cloud side. The address is an IP address that falls within the BGP CIDR block.
2137
+ *
2138
+ * @example
2139
+ * 169.254.10.1
2140
+ */
2125
2141
  localBgpIp?: string;
2142
+ /**
2143
+ * @remarks
2144
+ * The BGP CIDR block of the tunnel. The CIDR block must fall into 169.254.0.0/16 and the mask of the CIDR block must be 30 bits in length. The CIDR block cannot be 169.254.0.0/30, 169.254.1.0/30, 169.254.2.0/30, 169.254.3.0/30, 169.254.4.0/30, 169.254.5.0/30, 169.254.6.0/30, or 169.254.169.252/30.
2145
+ *
2146
+ * > The two tunnels of an IPsec-VPN connection must use different CIDR blocks.
2147
+ *
2148
+ * @example
2149
+ * 169.254.10.0/30
2150
+ */
2126
2151
  tunnelCidr?: string;
2127
2152
  static names(): {
2128
2153
  [key: string]: string;
@@ -2136,14 +2161,94 @@ export declare class CreateVpnAttachmentRequestTunnelOptionsSpecificationTunnelB
2136
2161
  });
2137
2162
  }
2138
2163
  export declare class CreateVpnAttachmentRequestTunnelOptionsSpecificationTunnelIkeConfig extends $dara.Model {
2164
+ /**
2165
+ * @remarks
2166
+ * The authentication algorithm that is used in Phase 1 negotiations. Valid values: **md5**, **sha1**, **sha256**, **sha384**, and **sha512**. Default value: **sha1**.
2167
+ *
2168
+ * @example
2169
+ * sha1
2170
+ */
2139
2171
  ikeAuthAlg?: string;
2172
+ /**
2173
+ * @remarks
2174
+ * The encryption algorithm that is used in Phase 1 negotiations. Valid values: **aes**, **aes192**, **aes256**, **des**, and **3des**. Default value: **aes**.
2175
+ *
2176
+ * @example
2177
+ * aes
2178
+ */
2140
2179
  ikeEncAlg?: string;
2180
+ /**
2181
+ * @remarks
2182
+ * The SA lifetime as a result of Phase 1 negotiations. Unit: seconds.
2183
+ *
2184
+ * Valid values: **0** to **86400**. Default value: **86400**.
2185
+ *
2186
+ * @example
2187
+ * 86400
2188
+ */
2141
2189
  ikeLifetime?: number;
2190
+ /**
2191
+ * @remarks
2192
+ * The negotiation mode of IKE. Valid values: **main** and **aggressive**. Default value: **main**.
2193
+ *
2194
+ * * **main:** This mode offers higher security during negotiations.
2195
+ * * **aggressive**: This mode is faster with a higher success rate.
2196
+ *
2197
+ * @example
2198
+ * main
2199
+ */
2142
2200
  ikeMode?: string;
2201
+ /**
2202
+ * @remarks
2203
+ * The Diffie-Hellman key exchange algorithm that is used in Phase 1 negotiations. Default value: **group2**.\\
2204
+ * Valid values: **group1**, **group2**, **group5**, and **group14**.
2205
+ *
2206
+ * @example
2207
+ * group2
2208
+ */
2143
2209
  ikePfs?: string;
2210
+ /**
2211
+ * @remarks
2212
+ * The version of the IKE protocol. Valid values: **ikev1** and **ikev2**. Default value: **ikev2**.
2213
+ *
2214
+ * Compared with IKEv1, IKEv2 simplifies the SA negotiation process and provides better support for scenarios with multiple CIDR blocks.
2215
+ *
2216
+ * @example
2217
+ * ikev2
2218
+ */
2144
2219
  ikeVersion?: string;
2220
+ /**
2221
+ * @remarks
2222
+ * The identifier of the tunnel on the Alibaba Cloud side, which is used in Phase 1 negotiations. The identifier cannot exceed 100 characters in length and cannot contain spaces. The default value is the IP address of the tunnel.
2223
+ *
2224
+ * **LocalId** supports fully qualified domain names (FQDNs). If you use an FQDN, we recommend that you set the negotiation mode to **aggressive**.
2225
+ *
2226
+ * @example
2227
+ * 47.XX.XX.1
2228
+ */
2145
2229
  localId?: string;
2230
+ /**
2231
+ * @remarks
2232
+ * The pre-shared key that is used for identity authentication between the tunnel and the tunnel peer.
2233
+ *
2234
+ * * The key cannot contain spaces. The key must be 1 to 100 characters in length, and can contain digits, letters, and the following special characters: ``~!\\`@#$%^&*()_-+={}[]|;:\\",.<>/?``
2235
+ * * If you do not specify a pre-shared key, the system randomly generates a 16-bit string as the pre-shared key. You can call the [DescribeVpnAttachments](https://help.aliyun.com/document_detail/2526939.html) operation to query the pre-shared key that is automatically generated by the system.
2236
+ *
2237
+ * > The tunnel and the tunnel peer must use the same pre-shared key. Otherwise, the tunnel cannot be established.
2238
+ *
2239
+ * @example
2240
+ * 123456****
2241
+ */
2146
2242
  psk?: string;
2243
+ /**
2244
+ * @remarks
2245
+ * The identifier of the tunnel peer, which is used in Phase 1 negotiations. The identifier cannot exceed 100 characters in length and cannot contain spaces. The default value is the IP address of the customer gateway that is associated with the tunnel.
2246
+ *
2247
+ * **RemoteId** supports FQDNs. If you use an FQDN, we recommend that you set the negotiation mode to **aggressive**.
2248
+ *
2249
+ * @example
2250
+ * 47.XX.XX.2
2251
+ */
2147
2252
  remoteId?: string;
2148
2253
  static names(): {
2149
2254
  [key: string]: string;
@@ -2157,9 +2262,43 @@ export declare class CreateVpnAttachmentRequestTunnelOptionsSpecificationTunnelI
2157
2262
  });
2158
2263
  }
2159
2264
  export declare class CreateVpnAttachmentRequestTunnelOptionsSpecificationTunnelIpsecConfig extends $dara.Model {
2265
+ /**
2266
+ * @remarks
2267
+ * The authentication algorithm that is used in Phase 2 negotiations.
2268
+ *
2269
+ * Valid values: **md5**, **sha1**, **sha256**, **sha384**, and **sha512**. Default value: **sha1**.
2270
+ *
2271
+ * @example
2272
+ * sha1
2273
+ */
2160
2274
  ipsecAuthAlg?: string;
2275
+ /**
2276
+ * @remarks
2277
+ * The encryption algorithm that is used in Phase 2 negotiations. Valid values: **aes**, **aes192**, **aes256**, **des**, and **3des**. Default value: **aes**.
2278
+ *
2279
+ * @example
2280
+ * aes
2281
+ */
2161
2282
  ipsecEncAlg?: string;
2283
+ /**
2284
+ * @remarks
2285
+ * The SA lifetime as a result of Phase 2 negotiations. Unit: seconds.
2286
+ *
2287
+ * Valid values: **0** to **86400**. Default value: **86400**.
2288
+ *
2289
+ * @example
2290
+ * 86400
2291
+ */
2162
2292
  ipsecLifetime?: number;
2293
+ /**
2294
+ * @remarks
2295
+ * The Diffie-Hellman key exchange algorithm that is used in Phase 2 negotiations. Default value: **group2**.
2296
+ *
2297
+ * Valid values: **disabled**, **group1**, **group2**, **group5**, and **group14**.
2298
+ *
2299
+ * @example
2300
+ * group2
2301
+ */
2163
2302
  ipsecPfs?: string;
2164
2303
  static names(): {
2165
2304
  [key: string]: string;
@@ -2173,12 +2312,65 @@ export declare class CreateVpnAttachmentRequestTunnelOptionsSpecificationTunnelI
2173
2312
  });
2174
2313
  }
2175
2314
  export declare class CreateVpnAttachmentRequestTunnelOptionsSpecification extends $dara.Model {
2315
+ /**
2316
+ * @remarks
2317
+ * The ID of the customer gateway that is associated with the tunnel.
2318
+ *
2319
+ * > This parameter is required when you create a dual-tunnel IPsec-VPN connection.
2320
+ *
2321
+ * @example
2322
+ * cgw-p0w2jemrcj5u61un8****
2323
+ */
2176
2324
  customerGatewayId?: string;
2325
+ /**
2326
+ * @remarks
2327
+ * Specifies whether to enable the DPD feature for the tunnel. Valid values:
2328
+ *
2329
+ * * **true** (default): enables DPD. The initiator of the IPsec-VPN connection sends DPD packets to check the existence and availability of the peer. If no feedback is received from the peer within the specified period of time, the connection fails. In this case, ISAKMP SA and IPsec SA are deleted along with the security tunnel.
2330
+ * * **false**: disables DPD. The initiator of the IPsec-VPN connection does not send DPD packets.
2331
+ *
2332
+ * @example
2333
+ * true
2334
+ */
2177
2335
  enableDpd?: boolean;
2336
+ /**
2337
+ * @remarks
2338
+ * Specifies whether to enable NAT traversal for the tunnel. Valid values:
2339
+ *
2340
+ * * **true** (default): enables NAT traversal. After NAT traversal is enabled, the initiator does not check the UDP ports during IKE negotiations and can automatically discover NAT gateway devices along the IPsec-VPN tunnel.
2341
+ * * **false**: disables NAT traversal.
2342
+ *
2343
+ * @example
2344
+ * true
2345
+ */
2178
2346
  enableNatTraversal?: boolean;
2347
+ /**
2348
+ * @remarks
2349
+ * The BGP configurations of the tunnel.
2350
+ *
2351
+ * > If you enable BGP for an IPsec-VPN connection, you must set **EnableTunnelsBgp** parameter to **true**.
2352
+ */
2179
2353
  tunnelBgpConfig?: CreateVpnAttachmentRequestTunnelOptionsSpecificationTunnelBgpConfig;
2354
+ /**
2355
+ * @remarks
2356
+ * The configurations of Phase 1 negotiations.
2357
+ */
2180
2358
  tunnelIkeConfig?: CreateVpnAttachmentRequestTunnelOptionsSpecificationTunnelIkeConfig;
2359
+ /**
2360
+ * @remarks
2361
+ * The order in which the tunnel was created.
2362
+ *
2363
+ * * **1**: Tunnel 1.
2364
+ * * **2**: Tunnel 2.
2365
+ *
2366
+ * @example
2367
+ * 1
2368
+ */
2181
2369
  tunnelIndex?: number;
2370
+ /**
2371
+ * @remarks
2372
+ * The configurations of Phase 2 negotiations.
2373
+ */
2182
2374
  tunnelIpsecConfig?: CreateVpnAttachmentRequestTunnelOptionsSpecificationTunnelIpsecConfig;
2183
2375
  static names(): {
2184
2376
  [key: string]: string;
@@ -2232,10 +2424,8 @@ export declare class CreateVpnConnectionRequestTunnelOptionsSpecificationTunnelB
2232
2424
  * @remarks
2233
2425
  * The autonomous system number (ASN) of the tunnel on the Alibaba Cloud side. Valid values: **1** to **4294967295**. Default value: **45104**.
2234
2426
  *
2235
- *
2236
- *
2237
2427
  * > - If you set **EnableTunnelsBgp** to **true**, you must set this parameter.
2238
- * > - Before you add BGP configurations, we recommend that you learn about how BGP dynamic routing works and the limits. For more information, see [VPN Gateway supports BGP dynamic routing](https://help.aliyun.com/document_detail/170235.html).
2428
+ * > - Before you add BGP configurations, we recommend that you learn about how BGP dynamic routing works and the limits. For more information, see [Configure BGP dynamic routing](https://help.aliyun.com/document_detail/2638220.html).
2239
2429
  * > - We recommend that you use a private ASN to establish BGP connections to Alibaba Cloud. For information about the range of private ASNs, see the relevant documentation.
2240
2430
  *
2241
2431
  * @example
@@ -2252,7 +2442,7 @@ export declare class CreateVpnConnectionRequestTunnelOptionsSpecificationTunnelB
2252
2442
  localBgpIp?: string;
2253
2443
  /**
2254
2444
  * @remarks
2255
- * The BGP CIDR block of the tunnel. The CIDR block must fall within the 169.254.0.0/16 range. The subnet mask of the CIDR block must be 30 bits in length.
2445
+ * The BGP CIDR block of the tunnel. The CIDR block must fall within 169.254.0.0/16 and the mask of the CIDR block must be 30 bits in length. The CIDR block cannot be 169.254.0.0/30, 169.254.1.0/30, 169.254.2.0/30, 169.254.3.0/30, 169.254.4.0/30, 169.254.5.0/30, 169.254.6.0/30, or 169.254.169.252/30.
2256
2446
  *
2257
2447
  * > The BGP CIDR block of each tunnel must be unique on a VPN gateway.
2258
2448
  *
@@ -2294,7 +2484,7 @@ export declare class CreateVpnConnectionRequestTunnelOptionsSpecificationTunnelI
2294
2484
  ikeEncAlg?: string;
2295
2485
  /**
2296
2486
  * @remarks
2297
- * The SA lifetime as a result of Phase 1 negotiations. Unit: seconds.
2487
+ * The SA lifetime as a result of Phase 1 negotiations. Unit: seconds
2298
2488
  *
2299
2489
  * Valid values: **0** to **86400**. Default value: **86400**.
2300
2490
  *
@@ -2307,7 +2497,7 @@ export declare class CreateVpnConnectionRequestTunnelOptionsSpecificationTunnelI
2307
2497
  * The negotiation mode of IKE. Valid values: **main** and **aggressive**. Default value: **main**.
2308
2498
  *
2309
2499
  * * **main:** This mode offers higher security during negotiations.
2310
- * * **aggressive**: This mode supports faster negotiations and a higher success rate.
2500
+ * * **aggressive:** This mode is faster and has a higher success rate.
2311
2501
  *
2312
2502
  * @example
2313
2503
  * main
@@ -2334,7 +2524,7 @@ export declare class CreateVpnConnectionRequestTunnelOptionsSpecificationTunnelI
2334
2524
  ikeVersion?: string;
2335
2525
  /**
2336
2526
  * @remarks
2337
- * The identifier of the tunnel on the Alibaba Cloud side, which is used in Phase 1 negotiations. It can contain at most 100 characters. The default value is the IP address of the tunnel.
2527
+ * The identifier of the tunnel on the Alibaba Cloud side, which is used in Phase 1 negotiations. The identifier cannot exceed 100 characters in length and cannot contain space characters. The default value is the IP address of the tunnel.
2338
2528
  *
2339
2529
  * **LocalId** supports fully qualified domain names (FQDNs). If you use an FQDN, we recommend that you set the negotiation mode to **aggressive**.
2340
2530
  *
@@ -2346,7 +2536,7 @@ export declare class CreateVpnConnectionRequestTunnelOptionsSpecificationTunnelI
2346
2536
  * @remarks
2347
2537
  * The pre-shared key that is used for identity authentication between the tunnel and the tunnel peer.
2348
2538
  *
2349
- * * The key must be 1 to 100 characters in length and can contain digits, letters, and the following special characters: ``~!\\`@#$%^&*()_-+={}[]|;:\\",.<>/?``
2539
+ * * The key cannot contain spaces. The key must be 1 to 100 characters in length, and can contain digits, letters, and the following special characters: ``~!\\`@#$%^&*()_-+={}[]|;:\\",.<>/?``
2350
2540
  * * If you do not specify a pre-shared key, the system randomly generates a 16-bit string as the pre-shared key. You can call the [DescribeVpnConnection](https://help.aliyun.com/document_detail/2526951.html) operation to query the pre-shared key that is automatically generated by the system.
2351
2541
  *
2352
2542
  * > The tunnel and the tunnel peer must use the same pre-shared key. Otherwise, the tunnel cannot be established.
@@ -2357,7 +2547,7 @@ export declare class CreateVpnConnectionRequestTunnelOptionsSpecificationTunnelI
2357
2547
  psk?: string;
2358
2548
  /**
2359
2549
  * @remarks
2360
- * The identifier of the tunnel peer, which is used in Phase 1 negotiations. It can contain at most 100 characters. The default value is the IP address of the customer gateway that is associated with the tunnel.
2550
+ * The identifier of the tunnel peer, which is used in Phase 1 negotiations. The identifier cannot exceed 100 characters in length and cannot contain space characters. The default value is the IP address of the customer gateway that is associated with the tunnel.
2361
2551
  *
2362
2552
  * **RemoteId** supports FQDNs. If you use an FQDN, we recommend that you set the negotiation mode to **aggressive**.
2363
2553
  *
@@ -2399,7 +2589,7 @@ export declare class CreateVpnConnectionRequestTunnelOptionsSpecificationTunnelI
2399
2589
  ipsecEncAlg?: string;
2400
2590
  /**
2401
2591
  * @remarks
2402
- * The SA lifetime as a result of Phase 2 negotiations. Unit: seconds.
2592
+ * The SA lifetime as a result of Phase 2 negotiations. Unit: seconds
2403
2593
  *
2404
2594
  * Valid values: **0** to **86400**. Default value: **86400**.
2405
2595
  *
@@ -2476,7 +2666,7 @@ export declare class CreateVpnConnectionRequestTunnelOptionsSpecification extend
2476
2666
  remoteCaCertificate?: string;
2477
2667
  /**
2478
2668
  * @remarks
2479
- * The role of the tunnel. Valid values: Valid values:
2669
+ * The role of the tunnel. Valid values:
2480
2670
  *
2481
2671
  * * **master**: The tunnel is an active tunnel.
2482
2672
  * * **slave**: The tunnel is a standby tunnel.
@@ -3738,7 +3928,7 @@ export declare class DescribeCommonBandwidthPackagesResponseBodyCommonBandwidthP
3738
3928
  export declare class DescribeCustomerGatewayResponseBodyTagsTag extends $dara.Model {
3739
3929
  /**
3740
3930
  * @remarks
3741
- * The key of tag N.
3931
+ * The tag key.
3742
3932
  *
3743
3933
  * @example
3744
3934
  * TagKey
@@ -3746,7 +3936,7 @@ export declare class DescribeCustomerGatewayResponseBodyTagsTag extends $dara.Mo
3746
3936
  key?: string;
3747
3937
  /**
3748
3938
  * @remarks
3749
- * The value of tag N.
3939
+ * The tag value.
3750
3940
  *
3751
3941
  * @example
3752
3942
  * TagValue
@@ -4552,6 +4742,7 @@ export declare class DescribeEipAddressesResponseBodyEipAddressesEipAddress exte
4552
4742
  * eipsg-t4nr90yik5oy38xd****
4553
4743
  */
4554
4744
  segmentInstanceId?: string;
4745
+ serviceID?: number;
4555
4746
  /**
4556
4747
  * @remarks
4557
4748
  * Indicates whether the resource is created by the service account. Valid values:
@@ -11833,9 +12024,9 @@ export declare class DescribeSnatTableEntriesResponseBodySnatTableEntries extend
11833
12024
  export declare class DescribeSslVpnClientCertsResponseBodySslVpnClientCertKeysSslVpnClientCertKey extends $dara.Model {
11834
12025
  /**
11835
12026
  * @remarks
11836
- * The timestamp that indicates when the SSL client certificate was created. Unit: millisecond.
12027
+ * The timestamp generated when the SSL client certificate was created. Unit: milliseconds.
11837
12028
  *
11838
- * This value is a UNIX timestamp representing the number of milliseconds that have elapsed since the epoch time January 1, 1970, 00:00:00 UTC.
12029
+ * This value is a UNIX timestamp representing the number of milliseconds that have elapsed since January 1, 1970, 00:00:00 UTC.
11839
12030
  *
11840
12031
  * @example
11841
12032
  * 1492747187000
@@ -11843,9 +12034,9 @@ export declare class DescribeSslVpnClientCertsResponseBodySslVpnClientCertKeysSs
11843
12034
  createTime?: number;
11844
12035
  /**
11845
12036
  * @remarks
11846
- * The timestamp that indicates when the SSL client certificate expires. Unit: millisecond.
12037
+ * The timestamp generated when the SSL client certificate expires. Unit: milliseconds.
11847
12038
  *
11848
- * This value is a UNIX timestamp representing the number of milliseconds that have elapsed since the epoch time January 1, 1970, 00:00:00 UTC.
12039
+ * This value is a UNIX timestamp representing the number of milliseconds that have elapsed since January 1, 1970, 00:00:00 UTC.
11849
12040
  *
11850
12041
  * @example
11851
12042
  * 1494966335000
@@ -11861,7 +12052,7 @@ export declare class DescribeSslVpnClientCertsResponseBodySslVpnClientCertKeysSs
11861
12052
  name?: string;
11862
12053
  /**
11863
12054
  * @remarks
11864
- * The region where the SSL client certificate is created.
12055
+ * The region ID of the SSL client certificate.
11865
12056
  *
11866
12057
  * @example
11867
12058
  * cn-hangzhou
@@ -11871,7 +12062,7 @@ export declare class DescribeSslVpnClientCertsResponseBodySslVpnClientCertKeysSs
11871
12062
  * @remarks
11872
12063
  * The ID of the resource group to which the SSL client certificate belongs.
11873
12064
  *
11874
- * You can call the [ListResourceGroups](https://help.aliyun.com/document_detail/158855.html) operation to query the resource group information.
12065
+ * You can call the [ListResourceGroups](https://help.aliyun.com/document_detail/158855.html) operation to query resource groups.
11875
12066
  *
11876
12067
  * @example
11877
12068
  * rg-acfmzs372yg****
@@ -11897,7 +12088,7 @@ export declare class DescribeSslVpnClientCertsResponseBodySslVpnClientCertKeysSs
11897
12088
  * @remarks
11898
12089
  * The status of the SSL client certificate. Valid values:
11899
12090
  *
11900
- * * **expiring-soon**
12091
+ * * **expiring-soon**: The certificate expires in one week.
11901
12092
  * * **normal**
11902
12093
  * * **expired**
11903
12094
  *
@@ -12067,26 +12258,35 @@ export declare class DescribeSslVpnServersResponseBodySslVpnServersSslVpnServer
12067
12258
  */
12068
12259
  enableMultiFactorAuth?: boolean;
12069
12260
  /**
12261
+ * @remarks
12262
+ * The ID of the IDaaS application.
12263
+ *
12070
12264
  * @example
12071
12265
  * app_my6g4qmvnwxzj2f****
12072
12266
  */
12073
12267
  IDaaSApplicationId?: string;
12074
12268
  /**
12075
12269
  * @remarks
12076
- * The ID of the IDaaS instance.
12270
+ * The ID of the IDaaS EIAM instance.
12077
12271
  *
12078
12272
  * @example
12079
12273
  * idaas-cn-hangzhou-****
12080
12274
  */
12081
12275
  IDaaSInstanceId?: string;
12082
12276
  /**
12277
+ * @remarks
12278
+ * The version of the IDaaS EIAM instance.
12279
+ *
12280
+ * * This parameter is returned only if the SSL server is associated with an IDaaS EIAM 2.0 instance. Only **EIAM 2.0** is returned.
12281
+ * * If the SSL server is associated with an IDaaS EIAM 1.0 instance, no value is returned.
12282
+ *
12083
12283
  * @example
12084
12284
  * EIAM 2.0
12085
12285
  */
12086
12286
  IDaaSInstanceVersion?: string;
12087
12287
  /**
12088
12288
  * @remarks
12089
- * The region ID of the IDaaS instance.
12289
+ * The region ID of the IDaaS EIAM instance.
12090
12290
  *
12091
12291
  * @example
12092
12292
  * cn-hangzhou
@@ -12118,7 +12318,7 @@ export declare class DescribeSslVpnServersResponseBodySslVpnServersSslVpnServer
12118
12318
  maxConnections?: number;
12119
12319
  /**
12120
12320
  * @remarks
12121
- * The name of the SSL-VPN server.
12321
+ * The name of the SSL server.
12122
12322
  *
12123
12323
  * @example
12124
12324
  * test
@@ -12134,7 +12334,7 @@ export declare class DescribeSslVpnServersResponseBodySslVpnServersSslVpnServer
12134
12334
  port?: number;
12135
12335
  /**
12136
12336
  * @remarks
12137
- * The protocol that is used by the SSL-VPN server.
12337
+ * The protocol that is used by the SSL server.
12138
12338
  *
12139
12339
  * @example
12140
12340
  * UDP
@@ -12142,7 +12342,7 @@ export declare class DescribeSslVpnServersResponseBodySslVpnServersSslVpnServer
12142
12342
  proto?: string;
12143
12343
  /**
12144
12344
  * @remarks
12145
- * The region ID of the SSL-VPN server.
12345
+ * The region ID of the SSL server.
12146
12346
  *
12147
12347
  * @example
12148
12348
  * cn-hangzhou
@@ -12150,7 +12350,7 @@ export declare class DescribeSslVpnServersResponseBodySslVpnServersSslVpnServer
12150
12350
  regionId?: string;
12151
12351
  /**
12152
12352
  * @remarks
12153
- * The resource group ID of the SSL-VPN server.
12353
+ * The resource group ID of the SSL server.
12154
12354
  *
12155
12355
  * You can call the [ListResourceGroups](https://help.aliyun.com/document_detail/158855.html) operation to query resource groups.
12156
12356
  *
@@ -12160,7 +12360,7 @@ export declare class DescribeSslVpnServersResponseBodySslVpnServersSslVpnServer
12160
12360
  resourceGroupId?: string;
12161
12361
  /**
12162
12362
  * @remarks
12163
- * The ID of the SSL-VPN server.
12363
+ * The ID of the SSL server.
12164
12364
  *
12165
12365
  * @example
12166
12366
  * vss-bp15j3du13gq1dgey****
@@ -12834,6 +13034,13 @@ export declare class DescribeVcoRouteEntriesResponseBodyVcoRouteEntries extends
12834
13034
  * vco-p0w2jpkhi2eeop6q6****
12835
13035
  */
12836
13036
  nextHop?: string;
13037
+ /**
13038
+ * @remarks
13039
+ * The list of next hops.
13040
+ *
13041
+ * > - This parameter is returned only by dual-tunnel IPsec connections.
13042
+ * > - This parameter is returned only when the tunnel status is **Phase 2 Negotiation Successful**.
13043
+ */
12837
13044
  nextHopTunnelIdList?: string[];
12838
13045
  /**
12839
13046
  * @remarks
@@ -12886,10 +13093,9 @@ export declare class DescribeVcoRouteEntriesResponseBodyVcoRouteEntries extends
12886
13093
  vpnConnectionId?: string;
12887
13094
  /**
12888
13095
  * @remarks
12889
- * The weight of the destination-based route. Valid values:
13096
+ * The weight of the destination-based route.
12890
13097
  *
12891
- * * **0**: a low priority
12892
- * * **100**: a high priority
13098
+ * > The current parameter has no effect.
12893
13099
  *
12894
13100
  * @example
12895
13101
  * 100
@@ -12907,8 +13113,35 @@ export declare class DescribeVcoRouteEntriesResponseBodyVcoRouteEntries extends
12907
13113
  });
12908
13114
  }
12909
13115
  export declare class DescribeVcoRouteEntriesResponseBodyVpnRouteCounts extends $dara.Model {
13116
+ /**
13117
+ * @remarks
13118
+ * The number of route entries.
13119
+ *
13120
+ * @example
13121
+ * 3
13122
+ */
12910
13123
  routeCount?: number;
13124
+ /**
13125
+ * @remarks
13126
+ * The route type. Valid values:
13127
+ *
13128
+ * * **custom**: destination-based route.
13129
+ * * **bgp**: BGP route.
13130
+ *
13131
+ * @example
13132
+ * bgp
13133
+ */
12911
13134
  routeEntryType?: string;
13135
+ /**
13136
+ * @remarks
13137
+ * The source of the BGP route. Valid values:
13138
+ *
13139
+ * * **CLOUD**: The current BGP route is learned by the IPsec connection from the transit router.
13140
+ * * **VPN_BGP**: The current BGP route is learned by the IPsec connection from the data center.
13141
+ *
13142
+ * @example
13143
+ * VPN_BGP
13144
+ */
12912
13145
  source?: string;
12913
13146
  static names(): {
12914
13147
  [key: string]: string;
@@ -14618,7 +14851,21 @@ export declare class DescribeVpcsResponseBodyVpcs extends $dara.Model {
14618
14851
  });
14619
14852
  }
14620
14853
  export declare class DescribeVpnAttachmentsResponseBodyVpnAttachmentsTags extends $dara.Model {
14854
+ /**
14855
+ * @remarks
14856
+ * The tag key of the IPsec-VPN connection.
14857
+ *
14858
+ * @example
14859
+ * TagKey
14860
+ */
14621
14861
  key?: string;
14862
+ /**
14863
+ * @remarks
14864
+ * The tag value of the IPsec-VPN connection.
14865
+ *
14866
+ * @example
14867
+ * TagValue
14868
+ */
14622
14869
  value?: string;
14623
14870
  static names(): {
14624
14871
  [key: string]: string;
@@ -14675,7 +14922,25 @@ export declare class DescribeVpnAttachmentsResponseBodyVpnAttachments extends $d
14675
14922
  * nametest1
14676
14923
  */
14677
14924
  name?: string;
14925
+ /**
14926
+ * @remarks
14927
+ * The system tags of the IPsec-VPN connection.
14928
+ *
14929
+ * You can check whether an IPsec-VPN connection supports BGP based on the system tags.
14930
+ *
14931
+ * **BGPSupport**: indicates whether the IPsec-VPN connection supports BGP.
14932
+ *
14933
+ * * **true**
14934
+ * * **false**
14935
+ *
14936
+ * @example
14937
+ * {\\"description\\":\\"forwarding 1.7.22\\",\\"VisuallySsl\\":\\"true\\",\\"PbrPriority\\":\\"true\\",\\"BGPSupport\\":\\"true\\",\\"IDaaSNewVersion\\":\\"true\\"}
14938
+ */
14678
14939
  tag?: string;
14940
+ /**
14941
+ * @remarks
14942
+ * The list of tags to be added to the IPsec-VPN connection.
14943
+ */
14679
14944
  tags?: DescribeVpnAttachmentsResponseBodyVpnAttachmentsTags[];
14680
14945
  /**
14681
14946
  * @remarks
@@ -15178,6 +15443,18 @@ export declare class DescribeVpnConnectionResponseBodyTunnelOptionsSpecification
15178
15443
  * The configuration of Phase 1 negotiations.
15179
15444
  */
15180
15445
  tunnelIkeConfig?: DescribeVpnConnectionResponseBodyTunnelOptionsSpecificationTunnelOptionsTunnelIkeConfig;
15446
+ /**
15447
+ * @remarks
15448
+ * The order in which the tunnel is created.
15449
+ *
15450
+ * * **1**: Tunnel 1.
15451
+ * * **2**: Tunnel 2.
15452
+ *
15453
+ * > This parameter is returned only if the IPsec-VPN connection is associated with a transit router.
15454
+ *
15455
+ * @example
15456
+ * 1
15457
+ */
15181
15458
  tunnelIndex?: number;
15182
15459
  /**
15183
15460
  * @remarks
@@ -15900,6 +16177,18 @@ export declare class DescribeVpnConnectionsResponseBodyVpnConnectionsVpnConnecti
15900
16177
  * The configuration of Phase 1 negotiations.
15901
16178
  */
15902
16179
  tunnelIkeConfig?: DescribeVpnConnectionsResponseBodyVpnConnectionsVpnConnectionTunnelOptionsSpecificationTunnelOptionsTunnelIkeConfig;
16180
+ /**
16181
+ * @remarks
16182
+ * The order in which the tunnel is created.
16183
+ *
16184
+ * * **1**: Tunnel 1.
16185
+ * * **2**: Tunnel 2.
16186
+ *
16187
+ * > This parameter is returned only if the IPsec-VPN connection is associated with a transit router.
16188
+ *
16189
+ * @example
16190
+ * 1
16191
+ */
15903
16192
  tunnelIndex?: number;
15904
16193
  /**
15905
16194
  * @remarks
@@ -16326,9 +16615,9 @@ export declare class DescribeVpnConnectionsResponseBodyVpnConnectionsVpnConnecti
16326
16615
  transitRouterName?: string;
16327
16616
  /**
16328
16617
  * @remarks
16329
- * The tunnel configuration of the IPsec-VPN connection.
16618
+ * The tunnel configurations of the IPsec-VPN connection.
16330
16619
  *
16331
- * Parameters in **TunnelOptionsSpecification** are returned only if you query IPsec-VPN connections in dual-tunnel mode.
16620
+ * Parameters in **TunnelOptionsSpecification** are returned only if you query an IPsec-VPN connection in dual-tunnel mode.
16332
16621
  */
16333
16622
  tunnelOptionsSpecification?: DescribeVpnConnectionsResponseBodyVpnConnectionsVpnConnectionTunnelOptionsSpecification;
16334
16623
  /**
@@ -16400,9 +16689,9 @@ export declare class DescribeVpnCrossAccountAuthorizationsResponseBodyCrossAccou
16400
16689
  bindInstance?: string;
16401
16690
  /**
16402
16691
  * @remarks
16403
- * The resource type of the authorization.
16692
+ * The type of resource that can be associated with the IPsec-VPN connection.
16404
16693
  *
16405
- * The value is set to **CEN**, which indicates that the IPsec-VPN connection can be associated with a transit router of a Cloud Enterprise Network (CEN) instance that belongs to another Alibaba Cloud account.
16694
+ * Only **CEN** can be returned, which indicates that the IPsec-VPN connection is authorized to be associated with the transit router of a Cloud Enterprise Network (CEN) instance that belongs to another Alibaba Cloud account.
16406
16695
  *
16407
16696
  * @example
16408
16697
  * CEN
@@ -16410,7 +16699,7 @@ export declare class DescribeVpnCrossAccountAuthorizationsResponseBodyCrossAccou
16410
16699
  bindProduct?: string;
16411
16700
  /**
16412
16701
  * @remarks
16413
- * The ID of the Alibaba Cloud account whose resource the IPsec-VPN connection can be associated with.
16702
+ * The ID of the Alibaba Cloud account whose resources the IPsec-VPN connection is authorized to be associated with.
16414
16703
  *
16415
16704
  * @example
16416
16705
  * 1210123456123456
@@ -16418,7 +16707,7 @@ export declare class DescribeVpnCrossAccountAuthorizationsResponseBodyCrossAccou
16418
16707
  bindUid?: number;
16419
16708
  /**
16420
16709
  * @remarks
16421
- * The timestamp when the authorization for the IPsec-VPN connection was created.
16710
+ * The time when the authorization for the IPsec-VPN connection was created.
16422
16711
  *
16423
16712
  * This value is a UNIX timestamp representing the number of milliseconds that have elapsed since the epoch time January 1, 1970, 00:00:00 UTC.
16424
16713
  *
@@ -22151,7 +22440,7 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22151
22440
  * @remarks
22152
22441
  * The CIDR block of the tunnel.
22153
22442
  *
22154
- * The CIDR block must fall into 169.254.0.0/16. The subnet mask of the CIDR block must be 30 bits in length.
22443
+ * The CIDR block must fall within the 169.254.0.0/16 range. The subnet mask of the CIDR block must be 30 bits in length.
22155
22444
  *
22156
22445
  * @example
22157
22446
  * 169.254.11.0/30
@@ -22184,8 +22473,8 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22184
22473
  * @remarks
22185
22474
  * The encryption algorithm that is used in IKE Phase 1 negotiations.
22186
22475
  *
22187
- * * Valid values when the IPsec connection is attached to a standard VPN gateway: **aes**, **aes192**, **sha256**, **des**, and **3des**.
22188
- * * Valid values when the IPsec connection is attached to a VPN gateway that uses an SM certificate: **sm4**.
22476
+ * * Valid values when the IPsec connection is attached to a standard VPN gateway: **aes**, **aes192**, **aes256**, **des**, and **3des**.
22477
+ * * If the IPsec connection is attached to a VPN gateway that uses an SM certificate, set the value to **sm4**.
22189
22478
  *
22190
22479
  * @example
22191
22480
  * aes
@@ -22193,7 +22482,7 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22193
22482
  ikeEncAlg?: string;
22194
22483
  /**
22195
22484
  * @remarks
22196
- * The SA lifetime that is used in IKE Phase 1 negotiations. Unit: seconds. Valid values: **0 to 86400**.
22485
+ * The SA lifetime as a result of Phase 1 negotiations. Unit: seconds. Valid values: **0 to 86400**.
22197
22486
  *
22198
22487
  * @example
22199
22488
  * 86400
@@ -22201,10 +22490,10 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22201
22490
  ikeLifetime?: number;
22202
22491
  /**
22203
22492
  * @remarks
22204
- * The IKE negotiation mode. Valid values:
22493
+ * The negotiation mode of IKE. Valid values:
22205
22494
  *
22206
22495
  * * **main:** This mode offers higher security during negotiations.
22207
- * * **aggressive:** This mode is faster and has a higher success rate.
22496
+ * * **aggressive**: This mode is faster and has a higher success rate.
22208
22497
  *
22209
22498
  * @example
22210
22499
  * main
@@ -22212,7 +22501,7 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22212
22501
  ikeMode?: string;
22213
22502
  /**
22214
22503
  * @remarks
22215
- * The Diffie-Hellman (DH) key exchange algorithm that is used in IKE Phase 1 negotiations. Valid values: **group1**, **group2**, **group5**, and **group14**.
22504
+ * The Diffie-Hellman key exchange algorithm that is used in Phase 1 negotiations. Valid values: **group1**, **group2**, **group5**, and **group14**.
22216
22505
  *
22217
22506
  * @example
22218
22507
  * group2
@@ -22220,7 +22509,7 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22220
22509
  ikePfs?: string;
22221
22510
  /**
22222
22511
  * @remarks
22223
- * The IKE version. Valid values: **ikev1** and **ikev2**.
22512
+ * The version of the IKE protocol. Valid values: **ikev1** and **ikev2**.
22224
22513
  *
22225
22514
  * @example
22226
22515
  * ikev2
@@ -22228,7 +22517,7 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22228
22517
  ikeVersion?: string;
22229
22518
  /**
22230
22519
  * @remarks
22231
- * The tunnel identifier. The identifier can be up to 100 characters in length, and supports fully qualified domain names (FQDNs) and IP addresses. The default identifier is the tunnel IP address.
22520
+ * The tunnel identifier. The identifier can be up to 100 characters in length, and supports FQDNs and IP addresses. The default value is the IP address of the tunnel.
22232
22521
  *
22233
22522
  * @example
22234
22523
  * 47.XX.XX.87
@@ -22238,10 +22527,10 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22238
22527
  * @remarks
22239
22528
  * The pre-shared key that is used to verify identities between the tunnel and peer.
22240
22529
  *
22241
- * * It must be 1 to 100 characters in length, and can contain letters, digits, and the following characters: ``~!`@#$%^&*()_-+={}[]|;:\\",.<>/?``
22242
- * * If you do not specify a pre-shared key, the system generates a random 16-character string as the pre-shared key. You can call the [DescribeVpnConnection](https://help.aliyun.com/document_detail/120374.html) operation to query the pre-shared key that is generated by the system.
22530
+ * * The key must be 1 to 100 characters in length and can contain digits, letters, and the following special characters: ``~!`@#$%^&*()_-+={}[]|;:\\",.<>/?``
22531
+ * * If you do not specify a pre-shared key, the system randomly generates a 16-bit string as the pre-shared key. You can call the [DescribeVpnConnection](https://help.aliyun.com/document_detail/120374.html) operation to query the pre-shared key that is automatically generated by the system.
22243
22532
  *
22244
- * > The pre-shared key that is configured for the tunnel and the tunnel peer must be the same. Otherwise, the system cannot establish the tunnel.
22533
+ * > The pre-shared key that is configured for the tunnel and the tunnel peer must be the same. Otherwise, the system cannot establish the tunnel.
22245
22534
  *
22246
22535
  * @example
22247
22536
  * 123456****
@@ -22282,8 +22571,8 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22282
22571
  * @remarks
22283
22572
  * The encryption algorithm that is used in IPsec Phase 2 negotiations.
22284
22573
  *
22285
- * * Valid values when the IPsec connection is attached to a standard VPN gateway: **aes**, **aes192**, **sha256**, **des**, and **3des**.
22286
- * * Valid values when the IPsec connection is attached to a VPN gateway that uses an SM certificate: **sm4**.
22574
+ * * Valid values when the IPsec connection is attached to a standard VPN gateway: **aes**, **aes192**, **aes256**, **des**, and **3des**.
22575
+ * * If the IPsec connection is attached to a VPN gateway that uses an SM certificate, set the value to **sm4**.
22287
22576
  *
22288
22577
  * @example
22289
22578
  * aes
@@ -22291,7 +22580,7 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22291
22580
  ipsecEncAlg?: string;
22292
22581
  /**
22293
22582
  * @remarks
22294
- * The SA lifetime that is used in IPsec Phase 2 negotiations. Unit: seconds. Valid values: **0 to 86400**.
22583
+ * The SA lifetime as a result of Phase 2 negotiations. Unit: seconds. Valid values: **0 to 86400**.
22295
22584
  *
22296
22585
  * @example
22297
22586
  * 86400
@@ -22299,7 +22588,7 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22299
22588
  ipsecLifetime?: number;
22300
22589
  /**
22301
22590
  * @remarks
22302
- * The DH key exchange algorithm that is used in IPsec Phase 2 negotiations. Valid values: **disabled**, **group1**, **group2**, **group5**, and **group14**.
22591
+ * The Diffie-Hellman key exchange algorithm that is used in Phase 2 negotiations. Valid values: **disabled**, **group1**, **group2**, **group5**, and **group14**.
22303
22592
  *
22304
22593
  * @example
22305
22594
  * group2
@@ -22317,12 +22606,16 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecificationTunne
22317
22606
  });
22318
22607
  }
22319
22608
  export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecification extends $dara.Model {
22609
+ /**
22610
+ * @example
22611
+ * cgw-1nmwbpgrp7ssqm1yn****
22612
+ */
22320
22613
  customerGatewayId?: string;
22321
22614
  /**
22322
22615
  * @remarks
22323
- * Specifies whether to enable the dead peer detection (DPD) feature. Valid values:
22616
+ * Specifies whether to enable dead peer detection (DPD). Valid values: Valid values:
22324
22617
  *
22325
- * * **true**: DPD is enabled. The IPsec initiator sends DPD packets to verify the existence and availability of the IPsec peer. If no response is received from the peer within a specified period of time, the IPsec peer is considered disconnected. Then, the ISAKMP SA, IPsec SA, and IPsec tunnel are deleted.
22618
+ * * **true** The IPsec initiator sends DPD packets to verify the existence and availability of the IPsec peer. If no response is received from the peer within a specified period of time, the IPsec peer is considered disconnected. Then, the ISAKMP SA, IPsec SA, and IPsec tunnel are deleted.
22326
22619
  * * **false**: DPD is disabled. The IPsec initiator does not send DPD packets.
22327
22620
  *
22328
22621
  * @example
@@ -22333,8 +22626,8 @@ export declare class ModifyTunnelAttributeRequestTunnelOptionsSpecification exte
22333
22626
  * @remarks
22334
22627
  * Specifies whether to enable NAT traversal. Valid values:
22335
22628
  *
22336
- * * **true**: NAT traversal is enabled. After NAT traversal is enabled, the initiator does not check the UDP ports during Internet Key Exchange (IKE) negotiations and can automatically discover NAT gateway devices along the IPsec-VPN tunnel.
22337
- * * **false**: NAT traversal is disabled.
22629
+ * * **true**: enables NAT traversal. After NAT traversal is enabled, the initiator does not check the UDP ports during IKE negotiations and can automatically discover NAT gateway devices along the IPsec-VPN tunnel.
22630
+ * * **false**: disables NAT traversal.
22338
22631
  *
22339
22632
  * @example
22340
22633
  * true
@@ -22636,8 +22929,33 @@ export declare class ModifyVpcPrefixListRequestRemovePrefixListEntry extends $da
22636
22929
  });
22637
22930
  }
22638
22931
  export declare class ModifyVpnAttachmentAttributeRequestTunnelOptionsSpecificationTunnelBgpConfig extends $dara.Model {
22932
+ /**
22933
+ * @remarks
22934
+ * The autonomous system number (ASN) of the tunnel on the Alibaba Cloud side. Valid values: **1** to **4294967295**. Default value: **45104**.
22935
+ *
22936
+ * > We recommend that you use a private ASN to establish BGP connections to Alibaba Cloud. Refer to the relevant documentation for the private ASN range.
22937
+ *
22938
+ * @example
22939
+ * 65530
22940
+ */
22639
22941
  localAsn?: number;
22942
+ /**
22943
+ * @remarks
22944
+ * The BGP IP address of the tunnel on the Alibaba Cloud side. The address is an IP address that falls within the BGP CIDR block.
22945
+ *
22946
+ * @example
22947
+ * 169.254.10.1
22948
+ */
22640
22949
  localBgpIp?: string;
22950
+ /**
22951
+ * @remarks
22952
+ * The BGP CIDR block of the tunnel. The CIDR block must fall within 169.254.0.0/16 and the mask of the CIDR block must be 30 bits in length. The CIDR block cannot be 169.254.0.0/30, 169.254.1.0/30, 169.254.2.0/30, 169.254.3.0/30, 169.254.4.0/30, 169.254.5.0/30, 169.254.6.0/30, or 169.254.169.252/30.
22953
+ *
22954
+ * > The two tunnels of an IPsec connection must use different CIDR blocks.
22955
+ *
22956
+ * @example
22957
+ * 169.254.10.0/30
22958
+ */
22641
22959
  tunnelCidr?: string;
22642
22960
  static names(): {
22643
22961
  [key: string]: string;
@@ -22651,14 +22969,93 @@ export declare class ModifyVpnAttachmentAttributeRequestTunnelOptionsSpecificati
22651
22969
  });
22652
22970
  }
22653
22971
  export declare class ModifyVpnAttachmentAttributeRequestTunnelOptionsSpecificationTunnelIkeConfig extends $dara.Model {
22972
+ /**
22973
+ * @remarks
22974
+ * The authentication algorithm that is used in Phase 1 negotiations. Valid values: **md5**, **sha1**, **sha256**, **sha384**, and **sha512**.
22975
+ *
22976
+ * @example
22977
+ * sha1
22978
+ */
22654
22979
  ikeAuthAlg?: string;
22980
+ /**
22981
+ * @remarks
22982
+ * The encryption algorithm that is used in Phase 1 negotiations. Valid values: **aes**, **aes192**, **aes256**, **des**, and **3des**.
22983
+ *
22984
+ * @example
22985
+ * aes
22986
+ */
22655
22987
  ikeEncAlg?: string;
22988
+ /**
22989
+ * @remarks
22990
+ * The SA lifetime as a result of Phase 1 negotiations. Unit: seconds.
22991
+ *
22992
+ * Valid values: **0** to **86400**.
22993
+ *
22994
+ * @example
22995
+ * 86400
22996
+ */
22656
22997
  ikeLifetime?: number;
22998
+ /**
22999
+ * @remarks
23000
+ * The negotiation mode of IKE. Valid values: **main** and **aggressive**.
23001
+ *
23002
+ * * **main:** This mode offers higher security during negotiations.
23003
+ * * **aggressive**: This mode is faster with a higher success rate.
23004
+ *
23005
+ * @example
23006
+ * main
23007
+ */
22657
23008
  ikeMode?: string;
23009
+ /**
23010
+ * @remarks
23011
+ * The Diffie-Hellman key exchange algorithm that is used in Phase 1 negotiations. Valid values: **group1**, **group2**, **group5**, and **group14**.
23012
+ *
23013
+ * @example
23014
+ * group2
23015
+ */
22658
23016
  ikePfs?: string;
23017
+ /**
23018
+ * @remarks
23019
+ * The version of the IKE protocol. Valid values: **ikev1** and **ikev2**.
23020
+ *
23021
+ * Compared with IKEv1, IKEv2 simplifies the SA negotiation process and provides better support for scenarios with multiple CIDR blocks.
23022
+ *
23023
+ * @example
23024
+ * ikev2
23025
+ */
22659
23026
  ikeVersion?: string;
23027
+ /**
23028
+ * @remarks
23029
+ * The identifier of the tunnel on the Alibaba Cloud side, which is used in Phase 1 negotiations. The identifier cannot exceed 100 characters in length and cannot contain spaces.
23030
+ *
23031
+ * **LocalId** supports fully qualified domain names (FQDNs). If you use an FQDN, we recommend that you set the negotiation mode to **aggressive**.
23032
+ *
23033
+ * @example
23034
+ * 47.XX.XX.1
23035
+ */
22660
23036
  localId?: string;
23037
+ /**
23038
+ * @remarks
23039
+ * The pre-shared key that is used for identity authentication between the tunnel and the tunnel peer.
23040
+ *
23041
+ * * The key must be 1 to 100 characters in length, and can contain digits, and letters. The key cannot contain spaces. ``~!\\`@#$%^&*()_-+={}[]|;:\\",.<>/?``
23042
+ * * If you do not specify a pre-shared key, the system randomly generates a 16-bit string as the pre-shared key. You can call the [DescribeVpnAttachments](https://help.aliyun.com/document_detail/2526939.html) operation to query the pre-shared key that is automatically generated by the system.
23043
+ *
23044
+ * > The tunnel and the tunnel peer must use the same pre-shared key. Otherwise, the tunnel cannot be established.
23045
+ *
23046
+ * @example
23047
+ * 123456****
23048
+ */
22661
23049
  psk?: string;
23050
+ /**
23051
+ * @remarks
23052
+ * The identifier of the tunnel peer, which is used in Phase 1 negotiations. The identifier cannot exceed 100 characters in length and cannot contain spaces.
23053
+ *
23054
+ * **RemoteId** supports FQDNs. If you use an FQDN, we recommend that you set the negotiation mode to **aggressive**.
23055
+ *
23056
+ * @example
23057
+ * 47.XX.XX.2
23058
+ */
22662
23059
  remoteId?: string;
22663
23060
  static names(): {
22664
23061
  [key: string]: string;
@@ -22672,9 +23069,43 @@ export declare class ModifyVpnAttachmentAttributeRequestTunnelOptionsSpecificati
22672
23069
  });
22673
23070
  }
22674
23071
  export declare class ModifyVpnAttachmentAttributeRequestTunnelOptionsSpecificationTunnelIpsecConfig extends $dara.Model {
23072
+ /**
23073
+ * @remarks
23074
+ * The authentication algorithm that is used in Phase 2 negotiations.
23075
+ *
23076
+ * Valid values: **md5**, **sha1**, **sha256**, **sha384**, and **sha512**.
23077
+ *
23078
+ * @example
23079
+ * sha1
23080
+ */
22675
23081
  ipsecAuthAlg?: string;
23082
+ /**
23083
+ * @remarks
23084
+ * The encryption algorithm that is used in Phase 2 negotiations. Valid values: **aes**, **aes192**, **aes256**, **des**, and **3des**.
23085
+ *
23086
+ * @example
23087
+ * aes
23088
+ */
22676
23089
  ipsecEncAlg?: string;
23090
+ /**
23091
+ * @remarks
23092
+ * The SA lifetime as a result of Phase 2 negotiations. Unit: seconds.
23093
+ *
23094
+ * Valid values: **0** to **86400**.
23095
+ *
23096
+ * @example
23097
+ * 86400
23098
+ */
22677
23099
  ipsecLifetime?: number;
23100
+ /**
23101
+ * @remarks
23102
+ * The Diffie-Hellman key exchange algorithm that is used in Phase 2 negotiations.
23103
+ *
23104
+ * Valid values: **disabled**, **group1**, **group2**, **group5**, and **group14**.
23105
+ *
23106
+ * @example
23107
+ * group2
23108
+ */
22678
23109
  ipsecPfs?: string;
22679
23110
  static names(): {
22680
23111
  [key: string]: string;
@@ -22688,13 +23119,73 @@ export declare class ModifyVpnAttachmentAttributeRequestTunnelOptionsSpecificati
22688
23119
  });
22689
23120
  }
22690
23121
  export declare class ModifyVpnAttachmentAttributeRequestTunnelOptionsSpecification extends $dara.Model {
23122
+ /**
23123
+ * @remarks
23124
+ * The ID of the customer gateway that is associated with the tunnel.
23125
+ *
23126
+ * > This parameter is only supported in dual-tunnel IPsec-VPN connections.
23127
+ *
23128
+ * @example
23129
+ * cgw-p0w2jemrcj5u61un8****
23130
+ */
22691
23131
  customerGatewayId?: string;
23132
+ /**
23133
+ * @remarks
23134
+ * Specifies whether to enable the Dead Peer Detection (DPD) feature for the tunnel. Valid values:
23135
+ *
23136
+ * * **true**: enables DPD. The initiator of the IPsec-VPN connection sends DPD packets to check the existence and availability of the peer. If no feedback is received from the peer within the specified period of time, the connection fails. In this case, ISAKMP SA and IPsec SA are deleted along with the security tunnel.
23137
+ * * **false**: disables DPD. The initiator of the IPsec-VPN connection does not send DPD packets.
23138
+ *
23139
+ * @example
23140
+ * true
23141
+ */
22692
23142
  enableDpd?: boolean;
23143
+ /**
23144
+ * @remarks
23145
+ * Specifies whether to enable NAT traversal for the tunnel. Valid values:
23146
+ *
23147
+ * * **true**: enables NAT traversal. After NAT traversal is enabled, the initiator does not check the UDP ports during IKE negotiations and can automatically discover NAT gateway devices along the IPsec-VPN tunnel.
23148
+ * * **false**: disables NAT traversal.
23149
+ *
23150
+ * @example
23151
+ * true
23152
+ */
22693
23153
  enableNatTraversal?: boolean;
23154
+ /**
23155
+ * @remarks
23156
+ * Add BGP configurations for the tunnel.
23157
+ *
23158
+ * > If you enable BGP for an IPsec-VPN connection, you must set **EnableTunnelsBgp** parameter to **true**.
23159
+ */
22694
23160
  tunnelBgpConfig?: ModifyVpnAttachmentAttributeRequestTunnelOptionsSpecificationTunnelBgpConfig;
23161
+ /**
23162
+ * @remarks
23163
+ * The tunnel ID.
23164
+ *
23165
+ * @example
23166
+ * tun-0jod7plwf2a0o9lvu****
23167
+ */
22695
23168
  tunnelId?: string;
23169
+ /**
23170
+ * @remarks
23171
+ * The configuration of Phase 1 negotiations.
23172
+ */
22696
23173
  tunnelIkeConfig?: ModifyVpnAttachmentAttributeRequestTunnelOptionsSpecificationTunnelIkeConfig;
23174
+ /**
23175
+ * @remarks
23176
+ * The order in which the tunnel was created.
23177
+ *
23178
+ * * **1**: Tunnel 1.
23179
+ * * **2**: Tunnel 2.
23180
+ *
23181
+ * @example
23182
+ * 1
23183
+ */
22697
23184
  tunnelIndex?: number;
23185
+ /**
23186
+ * @remarks
23187
+ * The configuration of Phase 2 negotiations.
23188
+ */
22698
23189
  tunnelIpsecConfig?: ModifyVpnAttachmentAttributeRequestTunnelOptionsSpecificationTunnelIpsecConfig;
22699
23190
  static names(): {
22700
23191
  [key: string]: string;
@@ -22734,7 +23225,10 @@ export declare class ModifyVpnAttachmentAttributeResponseBodyIkeConfig extends $
22734
23225
  ikeLifetime?: number;
22735
23226
  /**
22736
23227
  * @remarks
22737
- * The negotiation mode.
23228
+ * The IKE negotiation mode.
23229
+ *
23230
+ * * **main:** This mode offers higher security during negotiations.
23231
+ * * **aggressive**: This mode is faster with a higher success rate.
22738
23232
  *
22739
23233
  * @example
22740
23234
  * main
@@ -22752,6 +23246,11 @@ export declare class ModifyVpnAttachmentAttributeResponseBodyIkeConfig extends $
22752
23246
  * @remarks
22753
23247
  * The version of the IKE protocol.
22754
23248
  *
23249
+ * * **ikev1**
23250
+ * * **ikev2**
23251
+ *
23252
+ * Compared with IKEv1, IKEv2 simplifies the SA negotiation process and provides better support for scenarios with multiple CIDR blocks.
23253
+ *
22755
23254
  * @example
22756
23255
  * ikev1
22757
23256
  */
@@ -22766,9 +23265,9 @@ export declare class ModifyVpnAttachmentAttributeResponseBodyIkeConfig extends $
22766
23265
  localId?: string;
22767
23266
  /**
22768
23267
  * @remarks
22769
- * The pre-shared key that is used for identity authentication between the VPN gateway and the data center.
23268
+ * Enter a pre-shared key that is used for identity authentication between Alibaba Cloud and the data center.
22770
23269
  *
22771
- * > The pre-shared key of the IPsec-VPN connection must be the same as the authentication key of the data center. Otherwise, you cannot establish a connection between the data center and the VPN gateway.
23270
+ * > The pre-shared key of the IPsec-VPN connection must be the same as the authentication key of the on-premises data center. Otherwise, connections between the on-premises data center and Alibaba Cloud cannot be established.
22772
23271
  *
22773
23272
  * @example
22774
23273
  * 1234***
@@ -22838,10 +23337,45 @@ export declare class ModifyVpnAttachmentAttributeResponseBodyIpsecConfig extends
22838
23337
  });
22839
23338
  }
22840
23339
  export declare class ModifyVpnAttachmentAttributeResponseBodyTunnelOptionsSpecificationTunnelBgpConfig extends $dara.Model {
23340
+ /**
23341
+ * @remarks
23342
+ * The ASN on the Alibaba Cloud side.
23343
+ *
23344
+ * @example
23345
+ * 65530
23346
+ */
22841
23347
  localAsn?: number;
23348
+ /**
23349
+ * @remarks
23350
+ * The BGP IP address of the tunnel on the Alibaba Cloud side.
23351
+ *
23352
+ * @example
23353
+ * 169.254.10.1
23354
+ */
22842
23355
  localBgpIp?: string;
23356
+ /**
23357
+ * @remarks
23358
+ * The ASN of the tunnel peer.
23359
+ *
23360
+ * @example
23361
+ * 65531
23362
+ */
22843
23363
  peerAsn?: number;
23364
+ /**
23365
+ * @remarks
23366
+ * The BGP IP address of the tunnel peer.
23367
+ *
23368
+ * @example
23369
+ * 169.254.10.2
23370
+ */
22844
23371
  peerBgpIp?: string;
23372
+ /**
23373
+ * @remarks
23374
+ * The BGP CIDR block of the tunnel.
23375
+ *
23376
+ * @example
23377
+ * 169.254.10.0/30
23378
+ */
22845
23379
  tunnelCidr?: string;
22846
23380
  static names(): {
22847
23381
  [key: string]: string;
@@ -22855,14 +23389,80 @@ export declare class ModifyVpnAttachmentAttributeResponseBodyTunnelOptionsSpecif
22855
23389
  });
22856
23390
  }
22857
23391
  export declare class ModifyVpnAttachmentAttributeResponseBodyTunnelOptionsSpecificationTunnelIkeConfig extends $dara.Model {
23392
+ /**
23393
+ * @remarks
23394
+ * The authentication algorithm in the IKE phase.
23395
+ *
23396
+ * @example
23397
+ * sha1
23398
+ */
22858
23399
  ikeAuthAlg?: string;
23400
+ /**
23401
+ * @remarks
23402
+ * The encryption algorithm in the IKE phase.
23403
+ *
23404
+ * @example
23405
+ * aes
23406
+ */
22859
23407
  ikeEncAlg?: string;
23408
+ /**
23409
+ * @remarks
23410
+ * The lifetime in the IKE phase. Unit: seconds.
23411
+ *
23412
+ * @example
23413
+ * 86400
23414
+ */
22860
23415
  ikeLifetime?: number;
23416
+ /**
23417
+ * @remarks
23418
+ * The negotiation mode of IKE. Valid values:
23419
+ *
23420
+ * * **main:** This mode offers higher security during negotiations.
23421
+ * * **aggressive**: This mode is faster with a higher success rate.
23422
+ *
23423
+ * @example
23424
+ * main
23425
+ */
22861
23426
  ikeMode?: string;
23427
+ /**
23428
+ * @remarks
23429
+ * The Diffie-Hellman (DH) group in the IKE phase.
23430
+ *
23431
+ * @example
23432
+ * group2
23433
+ */
22862
23434
  ikePfs?: string;
23435
+ /**
23436
+ * @remarks
23437
+ * The version of the IKE protocol.
23438
+ *
23439
+ * @example
23440
+ * ikev2
23441
+ */
22863
23442
  ikeVersion?: string;
23443
+ /**
23444
+ * @remarks
23445
+ * The identifier of the tunnel on the Alibaba Cloud side.
23446
+ *
23447
+ * @example
23448
+ * 47.XX.XX.1
23449
+ */
22864
23450
  localId?: string;
23451
+ /**
23452
+ * @remarks
23453
+ * The pre-shared key.
23454
+ *
23455
+ * @example
23456
+ * 123456****
23457
+ */
22865
23458
  psk?: string;
23459
+ /**
23460
+ * @remarks
23461
+ * The peer identifier.
23462
+ *
23463
+ * @example
23464
+ * 47.XX.XX.2
23465
+ */
22866
23466
  remoteId?: string;
22867
23467
  static names(): {
22868
23468
  [key: string]: string;
@@ -22876,9 +23476,37 @@ export declare class ModifyVpnAttachmentAttributeResponseBodyTunnelOptionsSpecif
22876
23476
  });
22877
23477
  }
22878
23478
  export declare class ModifyVpnAttachmentAttributeResponseBodyTunnelOptionsSpecificationTunnelIpsecConfig extends $dara.Model {
23479
+ /**
23480
+ * @remarks
23481
+ * The authentication algorithm in the IPsec phase.
23482
+ *
23483
+ * @example
23484
+ * sha1
23485
+ */
22879
23486
  ipsecAuthAlg?: string;
23487
+ /**
23488
+ * @remarks
23489
+ * The encryption algorithm in the IPsec phase.
23490
+ *
23491
+ * @example
23492
+ * aes
23493
+ */
22880
23494
  ipsecEncAlg?: string;
23495
+ /**
23496
+ * @remarks
23497
+ * The lifetime in the IPsec phase. Unit: seconds.
23498
+ *
23499
+ * @example
23500
+ * 86400
23501
+ */
22881
23502
  ipsecLifetime?: number;
23503
+ /**
23504
+ * @remarks
23505
+ * The DH group in the IPsec phase.
23506
+ *
23507
+ * @example
23508
+ * group2
23509
+ */
22882
23510
  ipsecPfs?: string;
22883
23511
  static names(): {
22884
23512
  [key: string]: string;
@@ -22892,16 +23520,100 @@ export declare class ModifyVpnAttachmentAttributeResponseBodyTunnelOptionsSpecif
22892
23520
  });
22893
23521
  }
22894
23522
  export declare class ModifyVpnAttachmentAttributeResponseBodyTunnelOptionsSpecification extends $dara.Model {
23523
+ /**
23524
+ * @remarks
23525
+ * The ID of the customer gateway that is associated with the tunnel.
23526
+ *
23527
+ * @example
23528
+ * cgw-p0w2jemrcj5u61un8****
23529
+ */
22895
23530
  customerGatewayId?: string;
23531
+ /**
23532
+ * @remarks
23533
+ * Whether the DPD feature is enabled for the tunnel.
23534
+ *
23535
+ * * **true**: The feature is enabled.
23536
+ * * **false**: The feature is disabled.
23537
+ *
23538
+ * @example
23539
+ * true
23540
+ */
22896
23541
  enableDpd?: boolean;
23542
+ /**
23543
+ * @remarks
23544
+ * Indicates whether traversal feature is enabled for the tunnel. Valid values:
23545
+ *
23546
+ * * **true**: The feature is enabled.
23547
+ * * **false**: The feature is disabled.
23548
+ *
23549
+ * @example
23550
+ * true
23551
+ */
22897
23552
  enableNatTraversal?: boolean;
23553
+ /**
23554
+ * @remarks
23555
+ * The IP address on the Alibaba Cloud side.
23556
+ *
23557
+ * @example
23558
+ * 47.XX.XX.66
23559
+ */
22898
23560
  internetIp?: string;
23561
+ /**
23562
+ * @remarks
23563
+ * The tunnel role. Valid values:
23564
+ *
23565
+ * * **master**: The tunnel is an active tunnel.
23566
+ * * **slave**: The tunnel is a standby tunnel.
23567
+ *
23568
+ * @example
23569
+ * master
23570
+ */
22899
23571
  role?: string;
23572
+ /**
23573
+ * @remarks
23574
+ * The status of the tunnel. Valid values:
23575
+ *
23576
+ * * **active**: The tunnel is active.
23577
+ * * **updating**: The tunnel is being updated.
23578
+ * * **deleting:** The tunnel is being deleted.
23579
+ *
23580
+ * @example
23581
+ * active
23582
+ */
22900
23583
  state?: string;
23584
+ /**
23585
+ * @remarks
23586
+ * BGP configuration.
23587
+ */
22901
23588
  tunnelBgpConfig?: ModifyVpnAttachmentAttributeResponseBodyTunnelOptionsSpecificationTunnelBgpConfig;
23589
+ /**
23590
+ * @remarks
23591
+ * The tunnel ID.
23592
+ *
23593
+ * @example
23594
+ * tun-0jod7plwf2a0o9lvu****
23595
+ */
22902
23596
  tunnelId?: string;
23597
+ /**
23598
+ * @remarks
23599
+ * The configurations of Phase 1 negotiations.
23600
+ */
22903
23601
  tunnelIkeConfig?: ModifyVpnAttachmentAttributeResponseBodyTunnelOptionsSpecificationTunnelIkeConfig;
23602
+ /**
23603
+ * @remarks
23604
+ * The order in which the tunnel was created.
23605
+ *
23606
+ * * **1**: Tunnel 1.
23607
+ * * **2**: Tunnel 2.
23608
+ *
23609
+ * @example
23610
+ * 1
23611
+ */
22904
23612
  tunnelIndex?: number;
23613
+ /**
23614
+ * @remarks
23615
+ * The configurations of Phase 2 negotiations.
23616
+ */
22905
23617
  tunnelIpsecConfig?: ModifyVpnAttachmentAttributeResponseBodyTunnelOptionsSpecificationTunnelIpsecConfig;
22906
23618
  static names(): {
22907
23619
  [key: string]: string;
@@ -26175,7 +26887,10 @@ export declare class AllocateIpv6AddressResponse extends $dara.Model {
26175
26887
  export declare class AllocateIpv6InternetBandwidthRequest extends $dara.Model {
26176
26888
  /**
26177
26889
  * @remarks
26178
- * The Internet bandwidth of the IPv6 gateway. Unit: Mbit/s. Valid values: **1 to 5000**.
26890
+ * The Internet bandwidth of the IPv6 address. Unit: Mbit/s.
26891
+ *
26892
+ * * If you set **InternetChargeType** to **PayByTraffic**, valid values are **1** to **1000**.
26893
+ * * If you set **InternetChargeType** to **PayByBandwidth**, valid values are **1** to **2000**.
26179
26894
  *
26180
26895
  * This parameter is required.
26181
26896
  *
@@ -28438,7 +29153,7 @@ export declare class CheckVpnBgpEnabledRequest extends $dara.Model {
28438
29153
  *
28439
29154
  * You can use the client to generate the token, but you must make sure that the token is unique among different requests. The token can contain only ASCII characters.
28440
29155
  *
28441
- * > If you do not specify this parameter, the system automatically uses the **request ID** as the **client token**. The **request ID** may be different for each request.
29156
+ * > If you do not specify this parameter, the system automatically uses the **request ID** as the **client token**. The **request ID** may be different for each request.
28442
29157
  *
28443
29158
  * @example
28444
29159
  * 123e4567-e89b-12d3-a456-4266****
@@ -29510,11 +30225,14 @@ export declare class CreateCommonBandwidthPackageResponse extends $dara.Model {
29510
30225
  export declare class CreateCustomerGatewayRequest extends $dara.Model {
29511
30226
  /**
29512
30227
  * @remarks
29513
- * The autonomous system number (ASN) of the gateway device in the data center.
30228
+ * The autonomous system number (ASN) of the gateway device in your data center. This parameter is required If you want to use Border Gateway Protocol (BGP) for the IPsec-VPN connection. Valid values: 1 to 4294967295. 45104 is not supported.
29514
30229
  *
29515
- * **Asn** is a 4-byte number. You can enter the number in two segments and separate the first 16 bits from the following 16 bits with a period (.). Enter the number in each segment in the decimal format.
30230
+ * **Asn** is a 4-byte number. You can enter it in two segments and separate the first 16 bits from the following 16 bits with a period (.). Enter the number in each segment in decimal format.
29516
30231
  *
29517
- * For example, if you enter 123.456, the ASN is: 123 × 65536 + 456 = 8061384.
30232
+ * For example, if you enter 123.456, the ASN is 8061384. The ASN is calculated by using the following formula: 123 × 65536 + 456 = 8061384.
30233
+ *
30234
+ * > - We recommend that you use a private ASN to establish BGP connections to Alibaba Cloud. For information about the range of private ASNs, see the relevant documentation.
30235
+ * > - 45104 is a unique identifier assigned by IANA to Alibaba Cloud. It is used to identify Alibaba Cloud during route selection and data transmission over the Internet.
29518
30236
  *
29519
30237
  * @example
29520
30238
  * 65530
@@ -29554,7 +30272,18 @@ export declare class CreateCustomerGatewayRequest extends $dara.Model {
29554
30272
  description?: string;
29555
30273
  /**
29556
30274
  * @remarks
29557
- * The public IP address of the gateway device in the data center.
30275
+ * The static IP address of the gateway device in the data center.
30276
+ *
30277
+ * * If you want to create a public IPsec-VPN connection, enter a public IP address.
30278
+ * * If you want to create a private IPsec-VPN connection, enter a private IP address.
30279
+ *
30280
+ * You cannot use the following IP addresses. Otherwise, a IPsec-VPN connection cannot be established:
30281
+ *
30282
+ * * 100.64.0.0~100.127.255.255
30283
+ * * 127.0.0.0~127.255.255.255
30284
+ * * 169.254.0.0~169.254.255.255
30285
+ * * 224.0.0.0~239.255.255.255
30286
+ * * 255.0.0.0~255.255.255.255
29558
30287
  *
29559
30288
  * This parameter is required.
29560
30289
  *
@@ -29649,7 +30378,7 @@ export declare class CreateCustomerGatewayResponseBody extends $dara.Model {
29649
30378
  description?: string;
29650
30379
  /**
29651
30380
  * @remarks
29652
- * The public IP address of the gateway device in the data center.
30381
+ * The static IP address of the gateway device in the on-premises data center.
29653
30382
  *
29654
30383
  * @example
29655
30384
  * 101.12.XX.XX
@@ -31722,7 +32451,7 @@ export declare class CreateHaVipRequest extends $dara.Model {
31722
32451
  * @remarks
31723
32452
  * The description of the HAVIP.
31724
32453
  *
31725
- * The description must be 1 to 256 characters in length and cannot start with `http://` or `https://`.
32454
+ * The description must be 1 to 255 characters in length and cannot start with `http://` or `https://`.
31726
32455
  *
31727
32456
  * @example
31728
32457
  * This is my HaVip.
@@ -32563,11 +33292,11 @@ export declare class CreateIpsecServerRequest extends $dara.Model {
32563
33292
  * @remarks
32564
33293
  * The pre-shared key.
32565
33294
  *
32566
- * The pre-shared key is used for identity authentication between the IPsec server and the client. The key must be 1 to 100 characters in length.
33295
+ * The pre-shared key that is used for authentication between the IPsec-VPN server and the client. It must be 1 to 100 characters in length.
32567
33296
  *
32568
- * If you do not specify a pre-shared key, the system randomly generates a 16-character string as the pre-shared key. You can call the [ListIpsecServers](https://help.aliyun.com/document_detail/2794120.html) operation to query the pre-shared keys that are generated by the system.
33297
+ * If you do not specify a pre-shared key, the system randomly generates a 16-bit string as the pre-shared key. You can call [ListIpsecServers](https://help.aliyun.com/document_detail/2794120.html) to query keys generated by the system.
32569
33298
  *
32570
- * > The pre-shared key of the IPsec server must be the same as the client key. Otherwise, the IPsec server cannot be connected to the client.
33299
+ * > The pre-shared key of the IPsec server key must be the same as that of the client. Otherwise, the connection between the IPsec server and the client cannot be established.
32571
33300
  *
32572
33301
  * @example
32573
33302
  * Cfd123****
@@ -32859,7 +33588,7 @@ export declare class CreateIpv6EgressOnlyRuleRequest extends $dara.Model {
32859
33588
  * @remarks
32860
33589
  * The description of the egress-only rule.
32861
33590
  *
32862
- * The description must be 2 to 256 characters in length and cannot start with `http://` or `https://`.
33591
+ * The description must be 0 to 256 characters in length and cannot start with `http://` or `https://`.
32863
33592
  *
32864
33593
  * @example
32865
33594
  * ruledescription
@@ -32899,7 +33628,7 @@ export declare class CreateIpv6EgressOnlyRuleRequest extends $dara.Model {
32899
33628
  * @remarks
32900
33629
  * The name of the egress-only rule.
32901
33630
  *
32902
- * The name must be 2 to 128 characters in length, and can contain letters, digits, underscores (_), and hyphens (-). The name must start with a letter but cannot start with `http://` or `https://`.
33631
+ * The name must be 0 to 128 characters in length and cannot start with `http://` or `https://`.
32903
33632
  *
32904
33633
  * @example
32905
33634
  * rulename
@@ -32994,7 +33723,7 @@ export declare class CreateIpv6GatewayRequest extends $dara.Model {
32994
33723
  * @remarks
32995
33724
  * The description of the IPv6 gateway.
32996
33725
  *
32997
- * The description must be 2 to 256 characters in length and cannot start with `http://` or `https://`.
33726
+ * The description must be 0 to 256 characters in length and cannot start with `http://` or `https://`.
32998
33727
  *
32999
33728
  * @example
33000
33729
  * ipv6gatewayforVPC1
@@ -33004,7 +33733,7 @@ export declare class CreateIpv6GatewayRequest extends $dara.Model {
33004
33733
  * @remarks
33005
33734
  * The name of the IPv6 gateway.
33006
33735
  *
33007
- * The name must be 2 to 128 characters in length, and can contain letters, digits, underscores (_), and hyphens (-). The name must start with a letter but cannot start with `http://` or `https://`.
33736
+ * The name must be 0 to 128 characters in length and cannot start with `http://` or `https://`.
33008
33737
  *
33009
33738
  * @example
33010
33739
  * ipv6GW
@@ -35795,17 +36524,18 @@ export declare class CreateSslVpnServerRequest extends $dara.Model {
35795
36524
  * @remarks
35796
36525
  * The client CIDR block.
35797
36526
  *
35798
- * It is the CIDR block from which an IP address is allocated to the virtual network interface controller (NIC) of the client. It is not the private CIDR block of the client.
36527
+ * The CIDR block from which an IP address is allocated to the virtual network interface controller (NIC) of the client, rather than the private CIDR block.
35799
36528
  *
35800
- * If the client accesses the SSL server over an SSL-VPN connection, the VPN gateway assigns an IP address from the specified client CIDR block to the client. The client uses the assigned IP address to access cloud resources.
36529
+ * If the client accesses the SSL server over an SSL-VPN connection, the VPN gateway assigns an IP address from the specified client CIDR block for the client to access cloud resources.
35801
36530
  *
35802
36531
  * Make sure that the number of IP addresses in the client CIDR block is at least four times the maximum number of SSL-VPN connections supported by the VPN gateway.
35803
36532
  *
35804
36533
  * <details>
35805
36534
  * <summary>Click to view the reason.</summary>
35806
36535
  *
35807
- * For example, if you specify 192.168.0.0/24 as the client CIDR block, the system first divides a subnet CIDR block with a subnet mask of 30 from 192.168.0.0/24, such as 192.168.0.4/30. This subnet provides up to four IP addresses. Then, the system allocates an IP address from 192.168.0.4/30 to the client and uses the other three IP addresses to ensure network communication. In this case, one client consumes four IP addresses. Therefore, to ensure that an IP address is assigned to your client, you must make sure that the number of IP addresses in the client CIDR block is at least four times the maximum number of SSL-VPN connections supported by the VPN gateway with which the SSL server is associated.
36536
+ * For example, if you specify 192.168.0.0/24 as the client CIDR block, the system first divides a subnet CIDR block with a subnet mask of 30 from 192.168.0.0/24, such as 192.168.0.4/30. This subnet provides up to four IP addresses. Then, the system allocates an IP address from 192.168.0.4/30 to the client and uses the other three IP addresses to ensure network communication. In this case, one client consumes four IP addresses. Therefore, to ensure that an IP address is assigned to your client, the number of IP addresses in the client CIDR block must be at least four times the maximum number of SSL-VPN connections supported by the VPN gateway with which the SSL server is associated.
35808
36537
  * </details>
36538
+ *
35809
36539
  * <details>
35810
36540
  * <summary>Click to view the CIDR blocks that are not supported.</summary>
35811
36541
  *
@@ -35818,6 +36548,7 @@ export declare class CreateSslVpnServerRequest extends $dara.Model {
35818
36548
  * <details>
35819
36549
  * <summary>Click to view the recommended client CIDR blocks for different numbers of SSL-VPN connections.</summary>
35820
36550
  *
36551
+ *
35821
36552
  * * If the number of SSL-VPN connections is 5, we recommend that you specify a client CIDR block with a subnet mask that is less than or equal to 27 bits in length. Examples: 10.0.0.0/27 and 10.0.0.0/26.
35822
36553
  * * If the number of SSL-VPN connections is 10, we recommend that you specify a client CIDR block with a subnet mask that is less than or equal to 26 bits in length. Examples: 10.0.0.0/26 and 10.0.0.0/25.
35823
36554
  * * If the number of SSL-VPN connections is 20, we recommend that you specify a client CIDR block with a subnet mask that is less than or equal to 25 bits in length. Examples: 10.0.0.0/25 and 10.0.0.0/24.
@@ -35828,10 +36559,10 @@ export declare class CreateSslVpnServerRequest extends $dara.Model {
35828
36559
  * * If the number of SSL-VPN connections is 1,000, we recommend that you specify a client CIDR block with a subnet mask that is less than or equal to 20 bits in length. Examples: 10.0.0.0/20 and 10.0.0.0/19.
35829
36560
  * </details>
35830
36561
  *
35831
- * > - The subnet mask of the client CIDR block must be 16 to 29 bits in length.
36562
+ * > - The subnet mask of the client CIDR block must be 16 to 29 bits in length.
35832
36563
  * > - Make sure that the client CIDR block does not overlap with the local CIDR block, the VPC CIDR block, or route CIDR blocks associated with the client.
35833
- * > - We recommend that you use 10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16, or one of their subnets as the client CIDR block. If you want to specify a public CIDR block as the client CIDR block, you must specify the public CIDR block as the user CIDR block of the virtual private cloud (VPC). This way, the VPC can access the public CIDR block. For more information, see [VPC FAQ](https://help.aliyun.com/document_detail/185311.html).
35834
- * > - After you create an SSL server, the system automatically adds routes that point to the client CIDR block to the VPC route table. Do not add routes that point to the client CIDR block to the VPC route table again. Otherwise, SSL-VPN connections cannot work as expected.
36564
+ * > - We recommend that you use 10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16, or one of their subnets as the client CIDR block. If you want to specify a public CIDR block as the client CIDR block, you must specify the public CIDR block as the user CIDR block of the virtual private cloud (VPC). This way, the VPC can access the public CIDR block. For more information, see [VPC FAQs](https://help.aliyun.com/document_detail/185311.html).
36565
+ * > - After you create an SSL server, the system automatically adds routes that point to the client CIDR block to the VPC route table. Do not manually add routes that point to the client CIDR block. Otherwise, SSL-VPN connections cannot work as expected.
35835
36566
  *
35836
36567
  * This parameter is required.
35837
36568
  *
@@ -35908,7 +36639,7 @@ export declare class CreateSslVpnServerRequest extends $dara.Model {
35908
36639
  * @remarks
35909
36640
  * The local CIDR block.
35910
36641
  *
35911
- * It is the CIDR block that your client needs to access by using the SSL-VPN connection.
36642
+ * The CIDR block that your client needs to access by using the SSL-VPN connection.
35912
36643
  *
35913
36644
  * This value can be the CIDR block of a VPC, a vSwitch, a data center that is connected to a VPC by using an Express Connect circuit, or an Alibaba Cloud service such as Object Storage Service (OSS).
35914
36645
  *
@@ -37044,7 +37775,7 @@ export declare class CreateVcoRouteEntryRequest extends $dara.Model {
37044
37775
  ownerAccount?: string;
37045
37776
  /**
37046
37777
  * @remarks
37047
- * The ID of the region where the IPsec-VPN connection is established.
37778
+ * The region ID of the IPsec-VPN connection.
37048
37779
  *
37049
37780
  * You can call the [DescribeRegions](https://help.aliyun.com/document_detail/36063.html) operation to query the most recent region list.
37050
37781
  *
@@ -38344,22 +39075,24 @@ export declare class CreateVpnAttachmentRequest extends $dara.Model {
38344
39075
  autoConfigRoute?: boolean;
38345
39076
  /**
38346
39077
  * @remarks
38347
- * The Border Gateway Protocol (BGP) configurations:
39078
+ * This parameter is supported when you create an IPsec-VPN connection in single-tunnel mode.
39079
+ *
39080
+ * BGP configuration:
38348
39081
  *
38349
- * * **BgpConfig.EnableBgp**: specifies whether to enable BGP. Valid values: **true** and **false**. Default value: false.
39082
+ * * **BgpConfig.EnableBgp**: specifies whether to enable BGP. Valid values: **true** and **false** (default).
38350
39083
  *
38351
39084
  * * **BgpConfig.LocalAsn**: the ASN on the Alibaba Cloud side. Valid values: **1** to **4294967295**. Default value: **45104**.
38352
39085
  *
38353
- * You can enter the ASN in two segments. Separate the first 16 bits of the ASN from the remaining 16 bits with a period (.). Enter the number in each segment in decimal format.
39086
+ * You can enter a value in two segments separated by a period (.). Each segment is 16 bits in length. Enter the number in each segment in decimal format.
38354
39087
  *
38355
- * For example, if you enter 123.456, the ASN is: 123 × 65536 + 456 = 8061384.
39088
+ * For example, if you enter 123.456, the ASN is 8061384. The ASN is calculated by using the following formula: 123 × 65536 + 456 = 8061384.
38356
39089
  *
38357
- * * **BgpConfig.TunnelCidr**: the CIDR block of the IPsec tunnel. The CIDR block falls within 169.254.0.0/16. The subnet mask of the CIDR block must be 30 bits in length.
39090
+ * * **BgpConfig.TunnelCidr**: The CIDR block of the IPsec tunnel. The CIDR block must fall into 169.254.0.0/16 and the mask of the CIDR block must be 30 bits in length. The CIDR block cannot be 169.254.0.0/30, 169.254.1.0/30, 169.254.2.0/30, 169.254.3.0/30, 169.254.4.0/30, 169.254.5.0/30, 169.254.6.0/30, or 169.254.169.252/30.
38358
39091
  *
38359
- * * **LocalBgpIp:** the BGP IP address on the Alibaba Cloud side. This IP address must fall within the CIDR block range of the IPsec tunnel.
39092
+ * * **LocalBgpIp**: the BGP address on the Alibaba Cloud side. It must be an IP address that falls within the CIDR block of the IPsec tunnel.
38360
39093
  *
38361
- * > * Before you configure BGP, we recommend that you learn about how BGP works and the limits. For more information, see [BGP dynamic routing ](https://help.aliyun.com/document_detail/170235.html).
38362
- * > * We recommend that you use a private ASN to establish a connection with Alibaba Cloud over BGP. Refer to the relevant documentation for the private ASN range.
39094
+ * > - Before you add BGP configurations, we recommend that you learn about how BGP works and the limits. For more information, see [Configure BGP dynamic routing](https://help.aliyun.com/document_detail/445767.html).
39095
+ * > - We recommend that you use a private ASN to establish BGP connections to Alibaba Cloud. Refer to the relevant documentation for the private ASN range.
38363
39096
  *
38364
39097
  * @example
38365
39098
  * {"EnableBgp":"true","LocalAsn":"45104","TunnelCidr":"169.254.11.0/30","LocalBgpIp":"169.254.11.1"}
@@ -38381,6 +39114,8 @@ export declare class CreateVpnAttachmentRequest extends $dara.Model {
38381
39114
  * @remarks
38382
39115
  * The customer gateway ID.
38383
39116
  *
39117
+ * > This parameter is required only when you create a single-tunnel IPsec-VPN connection.
39118
+ *
38384
39119
  * @example
38385
39120
  * cgw-p0w2jemrcj5u61un8****
38386
39121
  */
@@ -38398,10 +39133,12 @@ export declare class CreateVpnAttachmentRequest extends $dara.Model {
38398
39133
  effectImmediately?: boolean;
38399
39134
  /**
38400
39135
  * @remarks
38401
- * Specifies whether to enable the dead peer detection (DPD) feature. Valid values:
39136
+ * This parameter is supported if you create an IPsec-VPN connection in single-tunnel mode.
38402
39137
  *
38403
- * * **true** (default) The initiator of the IPsec-VPN connection sends DPD packets to verify the existence and availability of the peer. If no response is received from the peer within a specified period of time, the connection fails. ISAKMP SAs and IPsec SAs are deleted. The IPsec tunnel is also deleted.
38404
- * * **false**
39138
+ * Specifies whether to enable DPD. Valid values: Valid values:
39139
+ *
39140
+ * * **true** (default): enables DPD. The initiator of the IPsec-VPN connection sends DPD packets to check the existence and availability of the peer. If no feedback is received from the peer within the specified period of time, the connection fails. In this case, ISAKMP SA and IPsec SA are deleted along with the security tunnel.
39141
+ * * **false**: disables DPD. The initiator of the IPsec-VPN connection does not send DPD packets.
38405
39142
  *
38406
39143
  * @example
38407
39144
  * true
@@ -38409,25 +39146,40 @@ export declare class CreateVpnAttachmentRequest extends $dara.Model {
38409
39146
  enableDpd?: boolean;
38410
39147
  /**
38411
39148
  * @remarks
39149
+ * This parameter is supported if you create an IPsec-VPN connection in single-tunnel mode.
39150
+ *
38412
39151
  * Specifies whether to enable NAT traversal. Valid values:
38413
39152
  *
38414
- * * **true** (default) After NAT traversal is enabled, the initiator does not check the UDP ports during IKE negotiations and can automatically discover NAT gateway devices along the VPN tunnel.
38415
- * * **false**
39153
+ * * **true** (default): enables NAT traversal. After NAT traversal is enabled, the initiator does not check the UDP ports during IKE negotiations and can automatically discover NAT gateway devices along the IPsec-VPN tunnel.
39154
+ * * **false**: disables NAT traversal.
38416
39155
  *
38417
39156
  * @example
38418
39157
  * true
38419
39158
  */
38420
39159
  enableNatTraversal?: boolean;
39160
+ /**
39161
+ * @remarks
39162
+ * This parameter is available if you create an IPsec-VPN connection in dual-tunnel mode.
39163
+ *
39164
+ * Specifies whether to enable the BGP feature for the tunnel. Valid values: **true** and **false**. Default value: false.
39165
+ *
39166
+ * > Before you add BGP configurations, we recommend that you learn about how BGP works and the limits. For more information, see [Configure BGP dynamic routing](https://help.aliyun.com/document_detail/445767.html)
39167
+ *
39168
+ * @example
39169
+ * false
39170
+ */
38421
39171
  enableTunnelsBgp?: boolean;
38422
39172
  /**
38423
39173
  * @remarks
38424
- * The health check configuration:
39174
+ * This parameter is supported if you create an IPsec-VPN connection in single-tunnel mode.
38425
39175
  *
38426
- * * **HealthCheckConfig.enable**: specifies whether to enable health checks. Valid values: **true** and **false**. Default value: false.
39176
+ * The health check configurations:
38427
39177
  *
38428
- * * **HealthCheckConfig.dip**: the destination IP address configured for health checks. Enter the IP address on the data center side that the VPC can communicate with through the IPsec-VPN connection.
39178
+ * * **HealthCheckConfig.enable**: indicates whether the health check is enabled. Valid values: **true** and **false** (default).
38429
39179
  *
38430
- * * **HealthCheckConfig.sip**: the source IP address configured for health checks. Enter the IP address on the VPC side that the data center can communicate with through the IPsec-VPN connection.
39180
+ * * **HealthCheckConfig.dip**: the destination IP address configured for health checks. Enter the IP address of the on-premises data center that the VPC can access through the IPsec connection.
39181
+ *
39182
+ * * **HealthCheckConfig.sip**: the source IP address configured for health checks. Enter the IP address of the VPC that the on-premises data center can access through the IPsec connection.
38431
39183
  *
38432
39184
  * * **HealthCheckConfig.interval**: the time interval of health check retries. Unit: seconds. Default value: **3**.
38433
39185
  *
@@ -38444,11 +39196,13 @@ export declare class CreateVpnAttachmentRequest extends $dara.Model {
38444
39196
  healthCheckConfig?: string;
38445
39197
  /**
38446
39198
  * @remarks
39199
+ * This parameter is supported if you create an IPsec-VPN connection in single-tunnel mode.
39200
+ *
38447
39201
  * The configurations of Phase 1 negotiations:
38448
39202
  *
38449
39203
  * * **IkeConfig.Psk**: the pre-shared key that is used for identity authentication between the VPN gateway and the on-premises data center.
38450
39204
  *
38451
- * * The key must be 1 to 100 characters in length and can contain digits, letters, and the following special characters: ``~!`@#$%^&*()_-+={}[]|;:\\",.<>/?``
39205
+ * * The key cannot contain space characters. The key must be 1 to 100 characters in length, and can contain digits, letters, and the following special characters: ``~!`@#$%^&*()_-+={}[]|;:\\",.<>/?``
38452
39206
  * * If you do not specify a pre-shared key, the system randomly generates a 16-bit string as the pre-shared key. You can call the [DescribeVpnConnection](https://help.aliyun.com/document_detail/2526951.html) operation to query the pre-shared key that is automatically generated by the system.
38453
39207
  *
38454
39208
  * > The pre-shared key of the IPsec-VPN connection must be the same as the authentication key of the on-premises data center. Otherwise, connections between the on-premises data center and the VPN gateway cannot be established.
@@ -38465,9 +39219,9 @@ export declare class CreateVpnAttachmentRequest extends $dara.Model {
38465
39219
  *
38466
39220
  * * **IkeConfig.IkeLifetime**: the SA lifetime as a result of Phase 1 negotiations. Unit: seconds. Valid values: **0** to **86400**. Default value: **86400**.
38467
39221
  *
38468
- * * **IkeConfig.LocalIdIPsec**: the identifier on the Alibaba Cloud side. The identifier cannot exceed 100 characters in length. This parameter is left empty by default.
39222
+ * * **IkeConfig.LocalId**: the identifier on the Alibaba Cloud side. The identifier cannot exceed 100 characters in length and cannot contain space characters. This parameter is empty by default.
38469
39223
  *
38470
- * * **IkeConfig.RemoteId**: the identifier on the data center side. The identifier cannot exceed 100 characters in length. The default value is the IP address of the customer gateway.
39224
+ * * **IkeConfig.RemoteId**: the identifier on the data center side. The identifier cannot exceed 100 characters in length and cannot contain space characters. The default value is the IP address of the customer gateway.
38471
39225
  *
38472
39226
  * @example
38473
39227
  * {"Psk":"1234****","IkeVersion":"ikev1","IkeMode":"main","IkeEncAlg":"aes","IkeAuthAlg":"sha1","IkePfs":"group2","IkeLifetime":86400,"LocalId":"47.XX.XX.1","RemoteId":"47.XX.XX.2"}
@@ -38475,12 +39229,14 @@ export declare class CreateVpnAttachmentRequest extends $dara.Model {
38475
39229
  ikeConfig?: string;
38476
39230
  /**
38477
39231
  * @remarks
39232
+ * This parameter is supported if you create an IPsec-VPN connection in single-tunnel mode.
39233
+ *
38478
39234
  * The configurations of Phase 2 negotiations:
38479
39235
  *
38480
39236
  * * **IpsecConfig.IpsecEncAlg**: the encryption algorithm that is used in Phase 2 negotiations. Valid values: **aes**, **aes192**, **aes256**, **des**, and **3des**. Default value: **aes**.
38481
39237
  * * **IpsecConfig. IpsecAuthAlg**: the authentication algorithm that is used in Phase 2 negotiations. Valid values: **md5**, **sha1**, **sha256**, **sha384**, and **sha512**. Default value: **md5**.
38482
- * * **IpsecConfig. IpsecPfs**: the Diffie-Hellman key exchange algorithm that is used in Phase 2 negotiations. Valid values: **disabled**, **group1**, **group2**, **group5**, and **group14**. Default value: **group2**.
38483
- * * **IpsecConfig. IpsecLifetime**: the SA lifetime that is determined by Phase 2 negotiations. Unit: seconds. Valid values: **0** to **86400**. Default value: **86400**.
39238
+ * * **IpsecConfig. IpsecPfs**: The Diffie-Hellman key exchange algorithm used in the second phase negotiation. Valid values: **disabled**, **group1**, **group2**, **group5**, and **group14**. Default value: **group2**.
39239
+ * * **IkeConfig.IkeLifetime**: the SA lifetime determined by Phase 2 negotiations. Unit: seconds. Valid values: **0** to **86400**. Default value: **86400**.
38484
39240
  *
38485
39241
  * @example
38486
39242
  * {"IpsecEncAlg":"aes","IpsecAuthAlg":"sha1","IpsecPfs":"group2","IpsecLifetime":86400}
@@ -38585,6 +39341,12 @@ export declare class CreateVpnAttachmentRequest extends $dara.Model {
38585
39341
  */
38586
39342
  tags?: CreateVpnAttachmentRequestTags[];
38587
39343
  /**
39344
+ * @remarks
39345
+ * The tunnel configurations.
39346
+ *
39347
+ * * You can specify parameters in the **TunnelOptionsSpecification** array when you create an IPsec-VPN connection in dual tunnel mode.
39348
+ * * When you create a IPsec-VPN connection in dual-tunnel mode, you must add both tunnels to IPsec-VPN connection to ensure that the IPsec-VPN connection has connection redundancy. Each IPsec-VPN connection supports only two tunnels.
39349
+ *
38588
39350
  * **if can be null:**
38589
39351
  * true
38590
39352
  */
@@ -38704,7 +39466,7 @@ export declare class CreateVpnConnectionRequest extends $dara.Model {
38704
39466
  autoConfigRoute?: boolean;
38705
39467
  /**
38706
39468
  * @remarks
38707
- * This parameter is supported when you create an IPsec-VPN connection in single-tunnel mode.
39469
+ * This parameter is supported if you create an IPsec-VPN connection in single-tunnel mode.
38708
39470
  *
38709
39471
  * BGP configuration:
38710
39472
  *
@@ -38716,14 +39478,14 @@ export declare class CreateVpnConnectionRequest extends $dara.Model {
38716
39478
  *
38717
39479
  * For example, if you enter 123.456, the ASN is 8061384. The ASN is calculated by using the following formula: 123 × 65536 + 456 = 8061384.
38718
39480
  *
38719
- * * **BgpConfig.TunnelCidr**: The CIDR block of the IPsec tunnel. The CIDR block must belong to 169.254.0.0/16 and the subnet mask is 30 bits in length.
39481
+ * * **BgpConfig.TunnelCidr**: The CIDR block of the IPsec tunnel. The CIDR block must fall within 169.254.0.0/16 and the mask of the CIDR block must be 30 bits in length. The CIDR block cannot be 169.254.0.0/30, 169.254.1.0/30, 169.254.2.0/30, 169.254.3.0/30, 169.254.4.0/30, 169.254.5.0/30, 169.254.6.0/30, or 169.254.169.252/30.
38720
39482
  *
38721
- * >The CIDR block of the IPsec tunnel for each IPsec-VPN connection on a VPN gateway must be unique.
39483
+ * > The CIDR block of the IPsec tunnel for each IPsec-VPN connection on a VPN gateway must be unique.
38722
39484
  *
38723
39485
  * * **LocalBgpIp**: the BGP address on the Alibaba Cloud side. It must be an IP address that falls within the CIDR block of the IPsec tunnel.
38724
39486
  *
38725
- * > * Before you add BGP configurations, we recommend that you learn about how BGP works and the limits. For more information, see [VPN Gateway supports BGP dynamic routing](https://help.aliyun.com/document_detail/170235.html).
38726
- * > * We recommend that you use private ASN to establish BGP connections to Alibaba Cloud. Refer to the relevant documentation for the private ASN range.
39487
+ * > - Before you add BGP configurations, we recommend that you learn about how BGP works and the limits. For more information, see [Configure BGP dynamic routing](https://help.aliyun.com/document_detail/2638220.html).
39488
+ * > - We recommend that you use a private ASN to establish BGP connections to Alibaba Cloud. Refer to the relevant documentation for the private ASN range.
38727
39489
  *
38728
39490
  * @example
38729
39491
  * {"EnableBgp":"true","LocalAsn":"45104","TunnelCidr":"169.254.11.0/30","LocalBgpIp":"169.254.11.1"}
@@ -38822,13 +39584,11 @@ export declare class CreateVpnConnectionRequest extends $dara.Model {
38822
39584
  *
38823
39585
  * * **IkeConfig.Psk**: the pre-shared key that is used for identity authentication between the VPN gateway and the on-premises data center.
38824
39586
  *
38825
- * * The key must be 1 to 100 characters in length and can contain digits, letters, and the following special characters: ``~!\\`@#$%^&*()_-+={}[]|;:\\",.<>/?``
39587
+ * * The key cannot contain spaces. The key must be 1 to 100 characters in length, and can contain digits, letters, and the following special characters: ``~!\\`@#$%^&*()_-+={}[]|;:\\",.<>/?``
38826
39588
  *
38827
39589
  * * If you do not specify a pre-shared key, the system randomly generates a 16-bit string as the pre-shared key. You can call the [DescribeVpnConnection](https://help.aliyun.com/document_detail/2526951.html) operation to query the pre-shared key that is automatically generated by the system.
38828
39590
  *
38829
- * **
38830
- *
38831
- * **Note** The pre-shared key of the IPsec-VPN connection must be the same as the authentication key of the on-premises data center. Otherwise, connections between the on-premises data center and the VPN gateway cannot be established.
39591
+ * > The pre-shared key of the IPsec-VPN connection must be the same as the authentication key of the on-premises data center. Otherwise, connections between the on-premises data center and the VPN gateway cannot be established.
38832
39592
  *
38833
39593
  * * **IkeConfig.IkeVersion**: the version of the Internet Key Exchange (IKE) protocol. Valid values: **ikev1** and **ikev2**. Default value: **ikev1**.
38834
39594
  *
@@ -38837,7 +39597,7 @@ export declare class CreateVpnConnectionRequest extends $dara.Model {
38837
39597
  * * **IkeConfig.IkeMode**: the negotiation mode of IKE. Valid values: **main** and **aggressive**. Default value: **main**.
38838
39598
  *
38839
39599
  * * **main:** This mode offers higher security during negotiations.
38840
- * * **aggressive**: This mode supports faster negotiations and a higher success rate.
39600
+ * * **aggressive:** This mode is faster and has a higher success rate.
38841
39601
  *
38842
39602
  * * **IkeConfig.IkeEncAlg**: the encryption algorithm that is used in Phase 1 negotiations.
38843
39603
  *
@@ -38849,11 +39609,11 @@ export declare class CreateVpnConnectionRequest extends $dara.Model {
38849
39609
  *
38850
39610
  * * **IkeConfig.IkePfs**: the Diffie-Hellman key exchange algorithm that is used in Phase 1 negotiations. Valid values: **group1**, **group2**, **group5**, and **group14**. Default value: **group2**.
38851
39611
  *
38852
- * * **IkeConfig.IkeLifetime**: the SA lifetime as a result of Phase 1 negotiations. Unit: seconds. Valid values: **0** to **86400**. Default value: **86400**.
39612
+ * * **IkeConfig.IkeLifetime**: the SA lifetime as a result of Phase 1 negotiations. Unit: seconds Valid values: **0** to **86400**. Default value: **86400**.
38853
39613
  *
38854
- * * **IkeConfig.LocalId**: the identifier of the VPN gateway. It can contain at most 100 characters. The default value is the IP address of the VPN gateway.
39614
+ * * **IkeConfig.LocalId**: the identifier of the VPN gateway. It can be up to 100 characters in length and cannot contain space characters. The default value is the IP address of the VPN gateway.
38855
39615
  *
38856
- * * **IkeConfig.RemoteId**: the identifier of the customer gateway. It can contain at most 100 characters. The default value is the IP address of the customer gateway.
39616
+ * * **IkeConfig.RemoteId**: the identifier of the customer gateway. It can be up to 100 characters in length and cannot contain space characters. The default value is the IP address of the customer gateway.
38857
39617
  *
38858
39618
  * @example
38859
39619
  * {"Psk":"1234****","IkeVersion":"ikev1","IkeMode":"main","IkeEncAlg":"aes","IkeAuthAlg":"sha1","IkePfs":"group2","IkeLifetime":86400,"LocalId":"47.XX.XX.1","RemoteId":"47.XX.XX.2"}
@@ -41849,7 +42609,28 @@ export declare class DeleteIpv6EgressOnlyRuleResponse extends $dara.Model {
41849
42609
  });
41850
42610
  }
41851
42611
  export declare class DeleteIpv6GatewayRequest extends $dara.Model {
42612
+ /**
42613
+ * @remarks
42614
+ * The client token that is used to ensure the idempotence of the request.
42615
+ *
42616
+ * You can use the client to generate the token, but you must make sure that the token is unique among different requests. The client token can contain only ASCII characters.
42617
+ *
42618
+ * > If you do not specify this parameter, the system automatically uses the **request ID** as the **client token**. The **request ID** may be different for each request.
42619
+ *
42620
+ * @example
42621
+ * 123e4567-e89b-12d3-a456-426655440000
42622
+ */
41852
42623
  clientToken?: string;
42624
+ /**
42625
+ * @remarks
42626
+ * Specifies whether to perform only a dry run, without performing the actual request. Valid values:
42627
+ *
42628
+ * * **true**: performs only a dry run. The system checks the request for potential issues, including missing parameter values, incorrect request syntax, and service limits. If the request fails the dry run, an error message is returned. If the request passes the dry run, the `DryRunOperation` error code is returned.
42629
+ * * **false** (default): performs a dry run and performs the actual request. If the request passes the dry run, a 2xx HTTP status code is returned and the operation is performed.
42630
+ *
42631
+ * @example
42632
+ * false
42633
+ */
41853
42634
  dryRun?: boolean;
41854
42635
  /**
41855
42636
  * @remarks
@@ -41924,7 +42705,24 @@ export declare class DeleteIpv6GatewayResponse extends $dara.Model {
41924
42705
  });
41925
42706
  }
41926
42707
  export declare class DeleteIpv6InternetBandwidthRequest extends $dara.Model {
42708
+ /**
42709
+ * @remarks
42710
+ * The client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but you must make sure that the token is unique among different requests. The client token can contain only ASCII characters. If you do not specify this parameter, the system automatically uses the request ID as the client token. The request ID may be different for each request.
42711
+ *
42712
+ * @example
42713
+ * 123e4567-e89b-12d3-a456-426655440000
42714
+ */
41927
42715
  clientToken?: string;
42716
+ /**
42717
+ * @remarks
42718
+ * Specifies whether to perform only a dry run, without performing the actual request. Valid values:
42719
+ *
42720
+ * * **true**: performs only a dry run. The system checks the request for potential issues, including missing parameter values, incorrect request syntax, and service limits. If the request fails the dry run, an error message is returned. If the request passes the dry run, the `DryRunOperation` error code is returned.
42721
+ * * **false** (default): performs a dry run and performs the actual request. If the request passes the dry run, a 2xx HTTP status code is returned and the operation is performed.
42722
+ *
42723
+ * @example
42724
+ * true
42725
+ */
41928
42726
  dryRun?: boolean;
41929
42727
  /**
41930
42728
  * @remarks
@@ -43888,7 +44686,7 @@ export declare class DeleteVcoRouteEntryRequest extends $dara.Model {
43888
44686
  ownerAccount?: string;
43889
44687
  /**
43890
44688
  * @remarks
43891
- * The ID of the region where the IPsec-VPN connection is established.
44689
+ * The region ID of the IPsec-VPN connection.
43892
44690
  *
43893
44691
  * You can call the [DescribeRegions](https://help.aliyun.com/document_detail/36063.html) operation to query the most recent region list.
43894
44692
  *
@@ -45918,7 +46716,7 @@ export declare class DescribeCustomerGatewayResponseBody extends $dara.Model {
45918
46716
  description?: string;
45919
46717
  /**
45920
46718
  * @remarks
45921
- * The public IP address of the gateway device in the data center.
46719
+ * The IP address of the gateway device in the data center.
45922
46720
  *
45923
46721
  * @example
45924
46722
  * 139.32.XX.XX
@@ -49411,9 +50209,10 @@ export declare class DescribeIpv6EgressOnlyRulesRequest extends $dara.Model {
49411
50209
  instanceId?: string;
49412
50210
  /**
49413
50211
  * @remarks
49414
- * The type of the instance to which you want to apply the egress-only rule. Set the value to
50212
+ * The type of the instance to which you want to apply the egress-only rule. Valid values:
49415
50213
  *
49416
- * **Ipv6Address**, which specifies that the egress-only rule applies to an IPv6 address.
50214
+ * * IPv6Address (default)
50215
+ * * IPv6Prefix
49417
50216
  *
49418
50217
  * @example
49419
50218
  * Ipv6Address
@@ -49449,7 +50248,7 @@ export declare class DescribeIpv6EgressOnlyRulesRequest extends $dara.Model {
49449
50248
  ownerId?: number;
49450
50249
  /**
49451
50250
  * @remarks
49452
- * The number of the page to return. Default value: **1**.
50251
+ * The page number. Default value: **1**.
49453
50252
  *
49454
50253
  * @example
49455
50254
  * 1
@@ -49457,7 +50256,7 @@ export declare class DescribeIpv6EgressOnlyRulesRequest extends $dara.Model {
49457
50256
  pageNumber?: number;
49458
50257
  /**
49459
50258
  * @remarks
49460
- * The number of entries to return on each page. Maximum value: **50**. Default value: **10**.
50259
+ * The number of entries per page. Maximum value: **50**. Default value: **10**.
49461
50260
  *
49462
50261
  * @example
49463
50262
  * 10
@@ -52649,8 +53448,7 @@ export declare class DescribeSslVpnClientCertsRequest extends $dara.Model {
52649
53448
  * @remarks
52650
53449
  * The ID of the resource group to which the SSL client certificate belongs.
52651
53450
  *
52652
- * The SSL client certificate is the same as the resource group of the SSL server associated with it.
52653
- * You can call the [DescribeSslVpnServers](https://help.aliyun.com/document_detail/2794078.html) operation to query the ID of the resource group to which the SSL server belongs.
53451
+ * The SSL client certificate and its associated SSL server belong to the same resource group. You can call the [DescribeSslVpnServers](https://help.aliyun.com/document_detail/2794078.html) operation to query the ID of the resource group to which the SSL server belongs.
52654
53452
  *
52655
53453
  * @example
52656
53454
  * rg-acfmzs372yg****
@@ -52930,11 +53728,9 @@ export declare class DescribeSslVpnServersRequest extends $dara.Model {
52930
53728
  regionId?: string;
52931
53729
  /**
52932
53730
  * @remarks
52933
- * The ID of the resource group to which the SSL server belongs.
53731
+ * The resource group ID of the SSL server.
52934
53732
  *
52935
- * The SSL server has the same resource group as its associated VPN gateway instance.
52936
- *
52937
- * You can call the [DescribeVpnGateway](https://help.aliyun.com/document_detail/2526915.html) operation to query the ID of the resource group to which the VPN gateway instance belongs.
53733
+ * The SSL server and its associated VPN gateway belong to the same resource group. You can call the [DescribeVpnGateway](https://help.aliyun.com/document_detail/2794055.html) operation to query the ID of the resource group to which the VPN gateway belongs.
52938
53734
  *
52939
53735
  * @example
52940
53736
  * rg-acfmzs372yg****
@@ -52996,7 +53792,7 @@ export declare class DescribeSslVpnServersResponseBody extends $dara.Model {
52996
53792
  requestId?: string;
52997
53793
  /**
52998
53794
  * @remarks
52999
- * The detailed information about the SSL-VPN server.
53795
+ * The detailed information about the SSL-VPN servers.
53000
53796
  */
53001
53797
  sslVpnServers?: DescribeSslVpnServersResponseBodySslVpnServers;
53002
53798
  /**
@@ -54247,9 +55043,15 @@ export declare class DescribeVcoRouteEntriesResponseBody extends $dara.Model {
54247
55043
  totalCount?: number;
54248
55044
  /**
54249
55045
  * @remarks
54250
- * The list of routes.
55046
+ * The list of route entries.
54251
55047
  */
54252
55048
  vcoRouteEntries?: DescribeVcoRouteEntriesResponseBodyVcoRouteEntries[];
55049
+ /**
55050
+ * @remarks
55051
+ * The information on route entries of the dual-tunnel IPsec connection.
55052
+ *
55053
+ * > This parameter is returned only for IPsec connections in dual-tunnel mode.
55054
+ */
54253
55055
  vpnRouteCounts?: DescribeVcoRouteEntriesResponseBodyVpnRouteCounts[];
54254
55056
  static names(): {
54255
55057
  [key: string]: string;
@@ -55448,9 +56250,9 @@ export declare class DescribeVpnConnectionResponseBody extends $dara.Model {
55448
56250
  transitRouterName?: string;
55449
56251
  /**
55450
56252
  * @remarks
55451
- * The tunnel configuration of the IPsec-VPN connection.
56253
+ * The tunnel configurations of the IPsec-VPN connection.
55452
56254
  *
55453
- * Parameters in **TunnelOptionsSpecification** are returned only if you query IPsec-VPN connections in dual-tunnel mode.
56255
+ * Parameters in **TunnelOptionsSpecification** are returned only if you query an IPsec-VPN connection in dual-tunnel mode.
55454
56256
  */
55455
56257
  tunnelOptionsSpecification?: DescribeVpnConnectionResponseBodyTunnelOptionsSpecification;
55456
56258
  /**
@@ -55701,7 +56503,7 @@ export declare class DescribeVpnConnectionsRequest extends $dara.Model {
55701
56503
  ownerId?: number;
55702
56504
  /**
55703
56505
  * @remarks
55704
- * The number of the page to return. Default value: **1**.
56506
+ * The page number of the page to return. Default value: **1**.
55705
56507
  *
55706
56508
  * @example
55707
56509
  * 1
@@ -55709,7 +56511,7 @@ export declare class DescribeVpnConnectionsRequest extends $dara.Model {
55709
56511
  pageNumber?: number;
55710
56512
  /**
55711
56513
  * @remarks
55712
- * The number of entries to return on each page. Default value: **10**. Valid values: **1** to **50**.
56514
+ * The number of entries returned on each page. Default value: **10**. Valid values: **1** to **50**.
55713
56515
  *
55714
56516
  * @example
55715
56517
  * 10
@@ -55810,7 +56612,7 @@ export declare class DescribeVpnConnectionsResponseBody extends $dara.Model {
55810
56612
  totalCount?: number;
55811
56613
  /**
55812
56614
  * @remarks
55813
- * The information about the IPsec-VPN connection.
56615
+ * The information about the IPsec-VPN connections.
55814
56616
  */
55815
56617
  vpnConnections?: DescribeVpnConnectionsResponseBodyVpnConnections;
55816
56618
  static names(): {
@@ -55846,9 +56648,9 @@ export declare class DescribeVpnCrossAccountAuthorizationsRequest extends $dara.
55846
56648
  * @remarks
55847
56649
  * The client token that is used to ensure the idempotence of the request.
55848
56650
  *
55849
- * You can use the client to generate the value, but you must make sure that it is unique among different requests. ClientToken can contain only ASCII characters.
56651
+ * You can use the client to generate the token, but you must make sure that the token is unique among different requests. The client token can contain only ASCII characters.
55850
56652
  *
55851
- * > If you do not set this parameter, the system automatically uses **RequestId** as **ClientToken**. **RequestId** of each API request may be different.
56653
+ * > If you do not specify this parameter, the system automatically uses the **request ID** as the **client token**. The **request ID** may be different for each request.
55852
56654
  *
55853
56655
  * @example
55854
56656
  * 123e4567-e89b-12d3-a456-4266****
@@ -55857,7 +56659,7 @@ export declare class DescribeVpnCrossAccountAuthorizationsRequest extends $dara.
55857
56659
  ownerAccount?: string;
55858
56660
  /**
55859
56661
  * @remarks
55860
- * The number of the page to return. Default value: **1**.
56662
+ * The page number. Default value: **1**.
55861
56663
  *
55862
56664
  * @example
55863
56665
  * 1
@@ -55865,7 +56667,7 @@ export declare class DescribeVpnCrossAccountAuthorizationsRequest extends $dara.
55865
56667
  pageNumber?: number;
55866
56668
  /**
55867
56669
  * @remarks
55868
- * The number of entries to return on each page. Default value: **10**. Valid values: **1** to **50**.
56670
+ * The number of entries to return per page. Default value: **10**. Valid values: **1** to **50**.
55869
56671
  *
55870
56672
  * @example
55871
56673
  * 10
@@ -55875,7 +56677,7 @@ export declare class DescribeVpnCrossAccountAuthorizationsRequest extends $dara.
55875
56677
  * @remarks
55876
56678
  * The ID of the region to which the IPsec-VPN connection belongs.
55877
56679
  *
55878
- * You can call the [DescribeRegions](https://help.aliyun.com/document_detail/36063.html) operation to query the most recent region list.
56680
+ * You can call the [DescribeRegions](https://help.aliyun.com/document_detail/36063.html) operation to query the region ID.
55879
56681
  *
55880
56682
  * This parameter is required.
55881
56683
  *
@@ -55914,7 +56716,7 @@ export declare class DescribeVpnCrossAccountAuthorizationsResponseBody extends $
55914
56716
  crossAccountAuthorizations?: DescribeVpnCrossAccountAuthorizationsResponseBodyCrossAccountAuthorizations[];
55915
56717
  /**
55916
56718
  * @remarks
55917
- * The page number of the returned page.
56719
+ * The page number.
55918
56720
  *
55919
56721
  * @example
55920
56722
  * 1
@@ -55922,7 +56724,7 @@ export declare class DescribeVpnCrossAccountAuthorizationsResponseBody extends $
55922
56724
  pageNumber?: number;
55923
56725
  /**
55924
56726
  * @remarks
55925
- * The number of entries returned per page.
56727
+ * The number of entries per page.
55926
56728
  *
55927
56729
  * @example
55928
56730
  * 10
@@ -55930,7 +56732,7 @@ export declare class DescribeVpnCrossAccountAuthorizationsResponseBody extends $
55930
56732
  pageSize?: number;
55931
56733
  /**
55932
56734
  * @remarks
55933
- * The ID of the request.
56735
+ * The request ID.
55934
56736
  *
55935
56737
  * @example
55936
56738
  * DB04E39A-6F0C-36AC-BCA0-B6D371B90062
@@ -56945,9 +57747,7 @@ export declare class DescribeVpnSslServerLogsResponseBody extends $dara.Model {
56945
57747
  count?: number;
56946
57748
  /**
56947
57749
  * @remarks
56948
- * An array of strings.
56949
- *
56950
- * Each item in the array is a log entry.
57750
+ * Log information list.
56951
57751
  */
56952
57752
  data?: DescribeVpnSslServerLogsResponseBodyData;
56953
57753
  /**
@@ -57348,10 +58148,10 @@ export declare class DiagnoseVpnGatewayRequest extends $dara.Model {
57348
58148
  clientToken?: string;
57349
58149
  /**
57350
58150
  * @remarks
57351
- * The configuration when you check the connectivity of the IPsec-VPN connection. Valid values:
58151
+ * Check the connectivity of the destination address. Valid values:
57352
58152
  *
57353
- * * **PrivateSourceIp**: the source IP address used when you check the connectivity of the IPsec-VPN connection. The source IP address must be on the VPC side.
57354
- * * **PrivateDestinationIp**: the destination IP address used when you check the connectivity of the IPsec-VPN connection. The destination IP address must be on the data center side.
58153
+ * * **PrivateSourceIp**: the source IP address. The source IP address must be on the VPC side.
58154
+ * * **PrivateDestinationIp**: the destination IP address. The destination IP address must be on the data center side.
57355
58155
  *
57356
58156
  * @example
57357
58157
  * {"PrivateSourceIp":"192.168.1.1","PrivateDestinationIp":"192.168.0.1"}
@@ -57415,7 +58215,9 @@ export declare class DiagnoseVpnGatewayRequest extends $dara.Model {
57415
58215
  export declare class DiagnoseVpnGatewayResponseBody extends $dara.Model {
57416
58216
  /**
57417
58217
  * @remarks
57418
- * The ID of the diagnostic.
58218
+ * The diagnostic ID.
58219
+ *
58220
+ * After a diagnostic ID is returned, you can call [GetVpnGatewayDiagnoseResult](https://help.aliyun.com/document_detail/2521963.html) to query the diagnostic report.
57419
58221
  *
57420
58222
  * @example
57421
58223
  * vpndgn-uf6kuxbe3iv028k3s****
@@ -61228,9 +62030,7 @@ export declare class ListIpsecServerLogsResponseBody extends $dara.Model {
61228
62030
  count?: number;
61229
62031
  /**
61230
62032
  * @remarks
61231
- * An array of strings.
61232
- *
61233
- * Each item in the array is a log entry.
62033
+ * Log information list.
61234
62034
  */
61235
62035
  data?: string[];
61236
62036
  /**
@@ -66729,17 +67529,38 @@ export declare class ModifyIPv6TranslatorEntryResponse extends $dara.Model {
66729
67529
  });
66730
67530
  }
66731
67531
  export declare class ModifyIpv6AddressAttributeRequest extends $dara.Model {
67532
+ /**
67533
+ * @remarks
67534
+ * The client token that is used to ensure the idempotence of the request.
67535
+ *
67536
+ * You can use the client to generate the token, but you must make sure that the token is unique among different requests. The client token can contain only ASCII characters.
67537
+ *
67538
+ * > If you do not specify this parameter, the system automatically uses the **request ID** as the **client token**. The **request ID** may be different for each request.
67539
+ *
67540
+ * @example
67541
+ * d7d24a21-f4ba-4454-9173-b3828dae492b
67542
+ */
66732
67543
  clientToken?: string;
66733
67544
  /**
66734
67545
  * @remarks
66735
67546
  * The description of the IPv6 address.
66736
67547
  *
66737
- * It must be 2 to 256 characters in length, and can contain letters, digits, periods (.), underscores (_), and hyphens (-). It must start with a letter. The name must start with a letter and cannot start with `http://` or `https://`.
67548
+ * The description must be 0 to 256 characters in length and cannot start with `http://` or `https://`.
66738
67549
  *
66739
67550
  * @example
66740
67551
  * test
66741
67552
  */
66742
67553
  description?: string;
67554
+ /**
67555
+ * @remarks
67556
+ * Specifies whether to perform a dry run, without performing the actual request. Valid values:
67557
+ *
67558
+ * * **true**: performs only a dry run. The system checks the request for potential issues, including missing parameter values, incorrect request syntax, and service limits. If the request fails the dry run, an error message is returned. If the request passes the dry run, the `DryRunOperation` error code is returned.
67559
+ * * **false** (default): performs a dry run and performs the actual request. If the request passes the dry run, a 2xx HTTP status code is returned and the operation is performed.
67560
+ *
67561
+ * @example
67562
+ * false
67563
+ */
66743
67564
  dryRun?: boolean;
66744
67565
  /**
66745
67566
  * @remarks
@@ -66755,7 +67576,7 @@ export declare class ModifyIpv6AddressAttributeRequest extends $dara.Model {
66755
67576
  * @remarks
66756
67577
  * The name of the IPv6 address.
66757
67578
  *
66758
- * The name must be 2 to 128 characters in length, and can contain letters, digits, periods (.), underscores (_), and hyphens (-). The name must start with a letter. The name must start with a letter and cannot start with `http://` or `https://`.
67579
+ * The name must be 0 to 128 characters in length and cannot start with `http://` or `https://`.
66759
67580
  *
66760
67581
  * @example
66761
67582
  * test
@@ -66824,15 +67645,38 @@ export declare class ModifyIpv6AddressAttributeResponse extends $dara.Model {
66824
67645
  });
66825
67646
  }
66826
67647
  export declare class ModifyIpv6GatewayAttributeRequest extends $dara.Model {
67648
+ /**
67649
+ * @remarks
67650
+ * The client token that is used to ensure the idempotence of the request.
67651
+ *
67652
+ * You can use the client to generate the token, but you must make sure that the token is unique among different requests. The client token can contain only ASCII characters.
67653
+ *
67654
+ * > If you do not specify this parameter, the system automatically uses the **request ID** as the **client token**. The **request ID** may be different for each request.
67655
+ *
67656
+ * @example
67657
+ * 02fb3da4-130e-11e9-8e44-0016e04115b
67658
+ */
66827
67659
  clientToken?: string;
66828
67660
  /**
66829
67661
  * @remarks
66830
67662
  * The description of the IPv6 gateway.
66831
67663
  *
67664
+ * The description must be 0 to 256 characters in length and cannot start with `http://` or `https://`.
67665
+ *
66832
67666
  * @example
66833
67667
  * ipv6description
66834
67668
  */
66835
67669
  description?: string;
67670
+ /**
67671
+ * @remarks
67672
+ * Specifies whether to perform only a dry run, without performing the actual request. Valid values:
67673
+ *
67674
+ * * **true**: performs only a dry run. The system checks the request for potential issues, including invalid AccessKey pairs, unauthorized RAM users, and missing parameter values. If the request fails the dry run, an error message is returned. If the request passes dry run, the `DryRunOperation` error code is returned.
67675
+ * * **false**: sends the API request. After the request passes the check, a 2XX HTTP status code is returned and the gateway endpoint is associated with the route table. This is the default value.
67676
+ *
67677
+ * @example
67678
+ * false
67679
+ */
66836
67680
  dryRun?: boolean;
66837
67681
  /**
66838
67682
  * @remarks
@@ -66848,7 +67692,7 @@ export declare class ModifyIpv6GatewayAttributeRequest extends $dara.Model {
66848
67692
  * @remarks
66849
67693
  * The name of the IPv6 gateway.
66850
67694
  *
66851
- * It must be 2 to 256 characters in length, and can contain letters, digits, periods (.), underscores (_), and hyphens (-). It must start with a letter. The name must start with a letter and cannot start with `http://` or `https://`.
67695
+ * The name must be 0 to 128 characters in length and cannot start with `http://` or `https://`.
66852
67696
  *
66853
67697
  * @example
66854
67698
  * ipv6name
@@ -68679,7 +69523,45 @@ export declare class ModifySslVpnServerRequest extends $dara.Model {
68679
69523
  cipher?: string;
68680
69524
  /**
68681
69525
  * @remarks
68682
- * The client IP address pool.
69526
+ * The client CIDR block.
69527
+ *
69528
+ * The CIDR block from which an IP address is allocated to the virtual network interface controller (NIC) of the client, rather than the private CIDR block.
69529
+ *
69530
+ * If the client accesses the SSL server over an SSL-VPN connection, the VPN gateway assigns an IP address from the specified client CIDR block for the client to access cloud resources.
69531
+ *
69532
+ * Make sure that the number of IP addresses in the client CIDR block is at least four times the maximum number of SSL-VPN connections supported by the VPN gateway.
69533
+ *
69534
+ * <details>
69535
+ * <summary>Click to view the reason.</summary>
69536
+ *
69537
+ * For example, if you specify 192.168.0.0/24 as the client CIDR block, the system first divides a subnet CIDR block with a subnet mask of 30 from 192.168.0.0/24, such as 192.168.0.4/30. This subnet provides up to four IP addresses. Then, the system allocates an IP address from 192.168.0.4/30 to the client and uses the other three IP addresses to ensure network communication. In this case, one client consumes four IP addresses. Therefore, to ensure that an IP address is assigned to your client, the number of IP addresses in the client CIDR block must be at least four times the maximum number of SSL-VPN connections supported by the VPN gateway with which the SSL server is associated.
69538
+ * </details>
69539
+ * <details>
69540
+ * <summary>Click to view the CIDR blocks that are not supported.</summary>
69541
+ *
69542
+ * * 100.64.0.0~100.127.255.255
69543
+ * * 127.0.0.0~127.255.255.255
69544
+ * * 169.254.0.0~169.254.255.255
69545
+ * * 224.0.0.0~239.255.255.255
69546
+ * * 255.0.0.0~255.255.255.255
69547
+ * </details>
69548
+ * <details>
69549
+ * <summary>Click to view the recommended client CIDR blocks for different numbers of SSL-VPN connections.</summary>
69550
+ *
69551
+ * * If the number of SSL-VPN connections is 5, we recommend that you specify a client CIDR block with a subnet mask that is less than or equal to 27 bits in length. Examples: 10.0.0.0/27 and 10.0.0.0/26.
69552
+ * * If the number of SSL-VPN connections is 10, we recommend that you specify a client CIDR block with a subnet mask that is less than or equal to 26 bits in length. Examples: 10.0.0.0/26 and 10.0.0.0/25.
69553
+ * * If the number of SSL-VPN connections is 20, we recommend that you specify a client CIDR block with a subnet mask that is less than or equal to 25 bits in length. Examples: 10.0.0.0/25 and 10.0.0.0/24.
69554
+ * * If the number of SSL-VPN connections is 50, we recommend that you specify a client CIDR block with a subnet mask that is less than or equal to 24 bits in length. Examples: 10.0.0.0/24 and 10.0.0.0/23.
69555
+ * * If the number of SSL-VPN connections is 100, we recommend that you specify a client CIDR block with a subnet mask that is less than or equal to 23 bits in length. Examples: 10.0.0.0/23 and 10.0.0.0/22.
69556
+ * * If the number of SSL-VPN connections is 200, we recommend that you specify a client CIDR block with a subnet mask that is less than or equal to 22 bits in length. Examples: 10.0.0.0/22 and 10.0.0.0/21.
69557
+ * * If the number of SSL-VPN connections is 500, we recommend that you specify a client CIDR block with a subnet mask that is less than or equal to 21 bits in length. Examples: 10.0.0.0/21 and 10.0.0.0/20.
69558
+ * * If the number of SSL-VPN connections is 1,000, we recommend that you specify a client CIDR block with a subnet mask that is less than or equal to 20 bits in length. Examples: 10.0.0.0/20 and 10.0.0.0/19.
69559
+ * </details>
69560
+ *
69561
+ * > - The subnet mask of the client CIDR block must be 16 to 29 bits in length.
69562
+ * > - Make sure that the client CIDR block does not overlap with the local CIDR block, the VPC CIDR block, or route CIDR blocks associated with the client.
69563
+ * > - We recommend that you use 10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16, or one of their subnets as the client CIDR block. If you want to specify a public CIDR block as the client CIDR block, you must specify the public CIDR block as the user CIDR block of the virtual private cloud (VPC). This way, the VPC can access the public CIDR block. For more information, see [VPC FAQs](https://help.aliyun.com/document_detail/185311.html).
69564
+ * > - After you create an SSL server, the system automatically adds routes that point to the client CIDR block to the VPC route table. Do not manually add routes that point to the client CIDR block. Otherwise, SSL-VPN connections cannot work as expected.
68683
69565
  *
68684
69566
  * @example
68685
69567
  * 10.30.30.0/24
@@ -68710,13 +69592,14 @@ export declare class ModifySslVpnServerRequest extends $dara.Model {
68710
69592
  compress?: boolean;
68711
69593
  /**
68712
69594
  * @remarks
68713
- * Specifies whether to enable two-factor authentication. If you enable two-factor authentication, you must also specify an IDaaS EIAM instance ID and an IDaaS application ID. Valid values:
69595
+ * Specifies whether to enable two-factor authentication. To enable two-factor authentication, you need to specify **IDaaSInstanceId**, **IDaaSRegionId**, and **IDaaSApplicationId**. Valid values:
68714
69596
  *
68715
- * * **true**
68716
- * * **false**
69597
+ * * **true**: enables the feature.
69598
+ * * **false**: disables the feature.
68717
69599
  *
68718
- * > - If you use two-factor authentication for the first time, you must first complete [authorization](https://ram.console.aliyun.com/role/authorization?request=%7B%22Services%22%3A%5B%7B%22Service%22%3A%22VPN%22%2C%22Roles%22%3A%5B%7B%22RoleName%22%3A%22AliyunVpnAccessingIdaasRole%22%2C%22TemplateId%22%3A%22IdaasRole%22%7D%5D%7D%5D%2C%22ReturnUrl%22%3A%22https%3A%2F%2Fvpc.console.aliyun.com%2Fsslvpn%2Fcn-shanghai%2Fvpn-servers%22%7D).
68719
- * > - IDaaS EIAM 1.0 instances are no longer for purchase. If your Alibaba Cloud account has IDaaS EIAM 1.0 instances, the IDaaS EIAM 1.0 instances can be associated after two-factor authentication is enabled. If your Alibaba Cloud account does not have IDaaS EIAM 1.0 instances, only IDaaS EIAM 2.0 instances can be associated after two-factor authentication is enabled.
69600
+ * > - If you use two-factor authentication for the first time, you must first complete [authorization](https://ram.console.aliyun.com/role/authorization?request=%7B%22Services%22%3A%5B%7B%22Service%22%3A%22VPN%22%2C%22Roles%22%3A%5B%7B%22RoleName%22%3A%22AliyunVpnAccessingIdaasRole%22%2C%22TemplateId%22%3A%22IdaasRole%22%7D%5D%7D%5D%2C%22ReturnUrl%22%3A%22https%3A%2F%2Fvpc.console.aliyun.com%2Fsslvpn%2Fcn-shanghai%2Fvpn-servers%22%7D).
69601
+ * > - When you create an SSL server in the UAE (Dubai) region, we recommend that you associate the SSL server with an IDaaS EIAM 2.0 instance in Singapore to reduce latency.
69602
+ * > - IDaaS EIAM 1.0 instances are no longer available for purchase. If your Alibaba Cloud account has IDaaS EIAM 1.0 instances, the IDaaS EIAM 1.0 instances can be associated after two-factor authentication is enabled. If your Alibaba Cloud account does not have IDaaS EIAM 1.0 instances, only IDaaS EIAM 2.0 instances can be associated after two-factor authentication is enabled.
68720
69603
  *
68721
69604
  * @example
68722
69605
  * false
@@ -68751,7 +69634,18 @@ export declare class ModifySslVpnServerRequest extends $dara.Model {
68751
69634
  IDaaSRegionId?: string;
68752
69635
  /**
68753
69636
  * @remarks
68754
- * The CIDR block of the client.
69637
+ * The local CIDR block.
69638
+ *
69639
+ * The CIDR block that your client needs to access by using the SSL-VPN connection.
69640
+ *
69641
+ * This value can be the CIDR block of a VPC, a vSwitch, a data center that is connected to a VPC by using an Express Connect circuit, or an Alibaba Cloud service such as Object Storage Service (OSS).
69642
+ *
69643
+ * The subnet mask of the specified local CIDR block must be 8 to 32 bits in length. You cannot specify the following CIDR blocks as the local CIDR blocks:
69644
+ *
69645
+ * * 127.0.0.0~127.255.255.255
69646
+ * * 169.254.0.0~169.254.255.255
69647
+ * * 224.0.0.0~239.255.255.255
69648
+ * * 255.0.0.0~255.255.255.255
68755
69649
  *
68756
69650
  * @example
68757
69651
  * 10.20.20.0/24
@@ -68836,7 +69730,7 @@ export declare class ModifySslVpnServerResponseBody extends $dara.Model {
68836
69730
  cipher?: string;
68837
69731
  /**
68838
69732
  * @remarks
68839
- * The client IP address pool.
69733
+ * The client CIDR block.
68840
69734
  *
68841
69735
  * @example
68842
69736
  * 10.30.30.0/24
@@ -68914,7 +69808,7 @@ export declare class ModifySslVpnServerResponseBody extends $dara.Model {
68914
69808
  internetIp?: string;
68915
69809
  /**
68916
69810
  * @remarks
68917
- * The CIDR block of the client.
69811
+ * The local CIDR block.
68918
69812
  *
68919
69813
  * @example
68920
69814
  * 10.20.20.0/24
@@ -69581,7 +70475,7 @@ export declare class ModifyVcoRouteEntryWeightRequest extends $dara.Model {
69581
70475
  ownerAccount?: string;
69582
70476
  /**
69583
70477
  * @remarks
69584
- * The ID of the region where the IPsec-VPN connection is established.
70478
+ * The region ID of the IPsec-VPN connection.
69585
70479
  *
69586
70480
  * You can call the [DescribeRegions](https://help.aliyun.com/document_detail/36063.html) operation to query the most recent region list.
69587
70481
  *
@@ -70236,7 +71130,9 @@ export declare class ModifyVpnAttachmentAttributeRequest extends $dara.Model {
70236
71130
  autoConfigRoute?: boolean;
70237
71131
  /**
70238
71132
  * @remarks
70239
- * The Border Gateway Protocol (BGP) configuration:
71133
+ * This parameter is supported if you modify the configurations of an IPsec-VPN connection in single-tunnel mode.
71134
+ *
71135
+ * BGP configuration:
70240
71136
  *
70241
71137
  * * **BgpConfig.EnableBgp**: specifies whether to enable BGP. Valid values:
70242
71138
  *
@@ -70245,16 +71141,16 @@ export declare class ModifyVpnAttachmentAttributeRequest extends $dara.Model {
70245
71141
  *
70246
71142
  * * **BgpConfig.LocalAsn**: the autonomous system number (ASN) on the Alibaba Cloud side. Valid values: **1** to **4294967295**.
70247
71143
  *
70248
- * You can enter the ASN in two segments. Separate the first 16 bits of the ASN from the remaining 16 bits with a period (.). Enter the number in each segment in decimal format.
71144
+ * You can enter a value in two segments separated by a period (.). Each segment is 16 bits in length. Enter the number in each segment in decimal format.
70249
71145
  *
70250
- * For example, if you enter 123.456, the ASN is: 123 × 65536 + 456 = 8061384.
71146
+ * For example, if you enter 123.456, the ASN is 8061384. The ASN is calculated by using the following formula: 123 × 65536 + 456 = 8061384.
70251
71147
  *
70252
- * * **BgpConfig.TunnelCidr:** the CIDR block of the IPsec tunnel. The CIDR block falls within 169.254.0.0/16. The subnet mask of the CIDR block must be 30 bits in length.
71148
+ * * **BgpConfig.TunnelCidr**: The CIDR block of the IPsec tunnel. The CIDR block must fall into 169.254.0.0/16 and the mask of the CIDR block must be 30 bits in length. The CIDR block cannot be 169.254.0.0/30, 169.254.1.0/30, 169.254.2.0/30, 169.254.3.0/30, 169.254.4.0/30, 169.254.5.0/30, 169.254.6.0/30, or 169.254.169.252/30.
70253
71149
  *
70254
- * * **LocalBgpIp:** the BGP IP address on the Alibaba Cloud side. This IP address must fall within the CIDR block of the IPsec tunnel.
71150
+ * * **LocalBgpIp**: the BGP address on the Alibaba Cloud side. It must be an IP address that falls within the CIDR block of the IPsec tunnel.
70255
71151
  *
70256
- * > - Before you configure BGP, we recommend that you learn how BGP dynamic routing works and the limits of using BGP dynamic routing. For more information, see [BGP dynamic routing ](https://help.aliyun.com/document_detail/170235.html).
70257
- * > - We recommend that you use a private ASN to establish a connection with Alibaba Cloud over BGP. Refer to the relevant documentation for the private ASN range.
71152
+ * > - Before you add BGP configurations, we recommend that you learn about how BGP works and the limits. For more information, see [Configure BGP dynamic routing](https://help.aliyun.com/document_detail/445767.html).
71153
+ * > - We recommend that you use a private ASN to establish BGP connections to Alibaba Cloud. Refer to the relevant documentation for the private ASN range.
70258
71154
  *
70259
71155
  * @example
70260
71156
  * {"EnableBgp":"true","LocalAsn":"45104","TunnelCidr":"169.254.11.0/30","LocalBgpIp":"169.254.11.1"}
@@ -70274,7 +71170,9 @@ export declare class ModifyVpnAttachmentAttributeRequest extends $dara.Model {
70274
71170
  clientToken?: string;
70275
71171
  /**
70276
71172
  * @remarks
70277
- * The customer gateway associated with the IPsec-VPN connection.
71173
+ * The customer gateways to be associated with the IPsec-VPN connections.
71174
+ *
71175
+ * > Only single-tunnel IPsec-VPN connections support this parameter.
70278
71176
  *
70279
71177
  * @example
70280
71178
  * cgw-p0w2jemrcj5u61un8****
@@ -70293,10 +71191,12 @@ export declare class ModifyVpnAttachmentAttributeRequest extends $dara.Model {
70293
71191
  effectImmediately?: boolean;
70294
71192
  /**
70295
71193
  * @remarks
70296
- * Specifies whether to enable the dead peer detection (DPD) feature. Valid values:
71194
+ * This parameter is supported if you modify the configurations of an IPsec-VPN connection in single-tunnel mode.
70297
71195
  *
70298
- * * **true**: enables the DPD feature. The initiator of the IPsec-VPN connection sends DPD packets to check the existence and availability of the peer. If no feedback is received from the peer within a specific period of time, the connection fails. Then, the ISAKMP SA, IPsec SA, and IPsec tunnel are deleted.
70299
- * * **false**: disables the DPD feature. The initiator of the IPsec-VPN connection does not send DPD packets.
71196
+ * Specifies whether to enable dead peer detection (DPD). Valid values:
71197
+ *
71198
+ * * **true**: enables DPD. The initiator of the IPsec-VPN connection sends DPD packets to check the existence and availability of the peer. If no feedback is received from the peer within the specified period of time, the connection fails. In this case, ISAKMP SA and IPsec SA are deleted, along with the security tunnel.
71199
+ * * **false**: disables DPD. The initiator of the IPsec-VPN connection does not send DPD packets.
70300
71200
  *
70301
71201
  * @example
70302
71202
  * true
@@ -70304,22 +71204,36 @@ export declare class ModifyVpnAttachmentAttributeRequest extends $dara.Model {
70304
71204
  enableDpd?: boolean;
70305
71205
  /**
70306
71206
  * @remarks
71207
+ * This parameter is supported if you modify the configurations of an IPsec-VPN connection in single-tunnel mode.
71208
+ *
70307
71209
  * Specifies whether to enable NAT traversal. Valid values:
70308
71210
  *
70309
- * * **true** After NAT traversal is enabled, the initiator does not check the UDP ports during IKE negotiations and can automatically discover NAT gateway devices along the IPsec tunnel.
70310
- * * **false**
71211
+ * * **true**: enables NAT traversal. After NAT traversal is enabled, the initiator does not check the UDP ports during IKE negotiations and can automatically discover NAT gateway devices along the IPsec-VPN tunnel.
71212
+ * * **false**: disables NAT traversal.
70311
71213
  *
70312
71214
  * @example
70313
71215
  * true
70314
71216
  */
70315
71217
  enableNatTraversal?: boolean;
70316
71218
  /**
71219
+ * @remarks
71220
+ * You can specify this parameter if you modify the configuration of a dual-tunnel IPsec-VPN connection.
71221
+ *
71222
+ * Specifies whether to enable the BGP feature for the tunnel. Valid values: **true** and **false**.
71223
+ *
71224
+ * > Before you add BGP configurations, we recommend that you learn about how BGP works and the limits. For more information, see [Configure BGP dynamic routing](https://help.aliyun.com/document_detail/445767.html).
71225
+ *
71226
+ * @example
71227
+ * false
71228
+ *
70317
71229
  * **if can be null:**
70318
71230
  * true
70319
71231
  */
70320
71232
  enableTunnelsBgp?: boolean;
70321
71233
  /**
70322
71234
  * @remarks
71235
+ * This parameter is supported if you modify the configurations of an IPsec-VPN connection in single-tunnel mode.
71236
+ *
70323
71237
  * The health check configurations:
70324
71238
  *
70325
71239
  * * **HealthCheckConfig.enable**: specifies whether to enable the health check feature. Valid values:
@@ -70327,9 +71241,9 @@ export declare class ModifyVpnAttachmentAttributeRequest extends $dara.Model {
70327
71241
  * * **true**
70328
71242
  * * **false**
70329
71243
  *
70330
- * * **HealthCheckConfig.dip**: the destination IP address that is used for health checks. Enter the IP address on the data center side that the VPC can communicate with through the IPsec-VPN connection.
71244
+ * * **HealthCheckConfig.dip**: the destination IP address configured for health checks. Specify the IP address of the data center with which the VPC can access through the IPsec-VPN connection.
70331
71245
  *
70332
- * * **HealthCheckConfig.sip**: the source IP address that is used for health checks. Enter the IP address on the VPC side that the data center can communicate with through the IPsec-VPN connection.
71246
+ * * **HealthCheckConfig.sip**: the source IP address configured for health checks. The IP address of the VPC with which the data center can access through the IPsec-VPN connection.
70333
71247
  *
70334
71248
  * * **HealthCheckConfig.interval**: the interval between two consecutive health checks. Unit: seconds.
70335
71249
  *
@@ -70346,30 +71260,32 @@ export declare class ModifyVpnAttachmentAttributeRequest extends $dara.Model {
70346
71260
  healthCheckConfig?: string;
70347
71261
  /**
70348
71262
  * @remarks
71263
+ * This parameter is supported if you modify the configurations of an IPsec-VPN connection in single-tunnel mode.
71264
+ *
70349
71265
  * The configuration of Phase 1 negotiations:
70350
71266
  *
70351
- * * **IkeConfig.Psk**: The pre-shared key that is used for authentication between the VPN gateway and the data center.
71267
+ * * **IkeConfig.Psk**: The pre-shared key that is used for identity authentication between the Alibaba Cloud IPsec connection and the on-premises data center.
70352
71268
  *
70353
- * * The pre-shared key must be 1 to 100 characters in length and can contain letters, digits, and the following characters: ``~ ! ` @ # $ % ^ & * () _ - + = {} [] | ; : \\" , . < > / ?``
70354
- * * If you do not specify a pre-shared key, the system generates a random 16-character string as the pre-shared key. You can call the [DescribeVpnConnection](https://help.aliyun.com/document_detail/120374.html) operation to query the pre-shared key that is generated by the system.
71269
+ * * The key must be 1 to 100 characters in length, and can contain digits, and letters. The key cannot contain spaces. ``~!`@#$%^&*()_-+={}[]|;:\\",.<>/?``
71270
+ * * If you do not specify a pre-shared key, the system randomly generates a 16-bit string as the pre-shared key. You can call the [DescribeVpnConnection](https://help.aliyun.com/document_detail/120374.html) operation to query the pre-shared key that is automatically generated by the system.
70355
71271
  *
70356
- * >The pre-shared key of the IPsec-VPN connection must be the same as the authentication key of the data center. Otherwise, you cannot establish a connection between the data center and the VPN gateway.
71272
+ * > The pre-shared key of the IPsec-VPN connection must be the same as the authentication key of the on-premises data center. Otherwise, connections between the on-premises data center and the VPN gateway cannot be established.
70357
71273
  *
70358
- * * **IkeConfig.IkeVersion**: the Internet Key Exchange (IKE) version. Valid values: **ikev1** and **ikev2**.
71274
+ * * **IkeConfig.IkeVersion**: the version of the Internet Key Exchange (IKE) protocol. Valid values: **ikev1** and **ikev2**.
70359
71275
  *
70360
71276
  * * **IkeConfig.IkeMode**: the negotiation mode. Valid values: **main** and **aggressive**.
70361
71277
  *
70362
- * * **IkeConfig.IkeEncAlg**: the encryption algorithm that is used in Phase 1 negotiations. Valid values: **aes**, **aes192**, **aes256**, **des**, and **3des**.
71278
+ * * **IkeConfig.IkeEncAlg:** the encryption algorithm that is used in Phase 1 negotiations. Valid values: **aes**, **aes192**, **aes256**, **des**, and **3des**.
70363
71279
  *
70364
71280
  * * **IkeConfig.IkeAuthAlg**: the authentication algorithm that is used in Phase 1 negotiations. Valid values: **md5**, **sha1**, **sha256**, **sha384**, and **sha512**.
70365
71281
  *
70366
- * * **IkeConfig.IkePfs**: the Diffie-Hellman (DH) key exchange algorithm that is used in Phase 1 negotiations. Valid values: **group1**, **group2**, **group5**, and **group14**.
71282
+ * * **IkeConfig.IkePfs**: the Diffie-Hellman key exchange algorithm that is used in Phase 1 negotiations. Valid values: **group1**, **group2**, **group5**, and **group14**.
70367
71283
  *
70368
- * * **IkeConfig.IkeLifetime**: the security association (SA) lifetime determined by Phase 1 negotiations. Unit: seconds. Valid values: **0** to **86400**.
71284
+ * * **IkeConfig.IkeLifetime**: the SA lifetime as a result of Phase 1 negotiations. Unit: seconds. Valid values: **0** to **86400**.
70369
71285
  *
70370
- * * **IkeConfig.LocalIdIPsec**: the identifier of the IPsec-VPN connection on the Alibaba Cloud side. The identifier can be up to 100 characters in length.
71286
+ * * **IkeConfig.LocalId**: the identifier on the Alibaba Cloud side. The identifier cannot exceed 100 characters in length and cannot contain spaces.
70371
71287
  *
70372
- * * **IkeConfig.RemoteId**: the identifier of the IPsec-VPN connection on the data center side. The identifier can be up to 100 characters in length.
71288
+ * * **IkeConfig.RemoteId**: the identifier of the data center. It cannot exceed 100 characters in length and cannot contain spaces.
70373
71289
  *
70374
71290
  * @example
70375
71291
  * {"Psk":"1234****","IkeVersion":"ikev1","IkeMode":"main","IkeEncAlg":"aes","IkeAuthAlg":"sha1","IkePfs":"group2","IkeLifetime":86400,"LocalId":"47.XX.XX.1","RemoteId":"47.XX.XX.2"}
@@ -70377,12 +71293,14 @@ export declare class ModifyVpnAttachmentAttributeRequest extends $dara.Model {
70377
71293
  ikeConfig?: string;
70378
71294
  /**
70379
71295
  * @remarks
71296
+ * This parameter is supported if you modify the configurations of an IPsec-VPN connection in single-tunnel mode.
71297
+ *
70380
71298
  * The configuration of Phase 2 negotiations:
70381
71299
  *
70382
71300
  * * **IpsecConfig.IpsecEncAlg:** the encryption algorithm that is used in Phase 2 negotiations. Valid values: **aes**, **aes192**, **aes256**, **des**, and **3des**.
70383
71301
  * * **IpsecConfig. IpsecAuthAlg:** the authentication algorithm that is used in Phase 2 negotiations. Valid values: **md5**, **sha1**, **sha256**, **sha384**, and **sha512**.
70384
- * * **IpsecConfig. IpsecPfs:** the DH key exchange algorithm that is used in Phase 2 negotiations. Valid values: **disabled**, **group1**, **group2**, **group5**, and **group14**.
70385
- * * **IpsecConfig. IpsecLifetime**: the SA lifetime determined by Phase 2 negotiations. Unit: seconds. Valid values: **0** to **86400**.
71302
+ * * **IpsecConfig. IpsecPfs:** the Diffie-Hellman key exchange algorithm that is used in Phase 2 negotiations. Valid values: **disabled**, **group1**, **group2**, **group5**, and **group14**.
71303
+ * * **IkeConfig.IkeLifetime**: the SA lifetime determined by Phase 2 negotiations. Unit: seconds. Valid values: **0** to **86400**.
70386
71304
  *
70387
71305
  * @example
70388
71306
  * {"IpsecEncAlg":"aes","IpsecAuthAlg":"sha1","IpsecPfs":"group2","IpsecLifetime":86400}
@@ -70463,6 +71381,11 @@ export declare class ModifyVpnAttachmentAttributeRequest extends $dara.Model {
70463
71381
  resourceOwnerAccount?: string;
70464
71382
  resourceOwnerId?: number;
70465
71383
  /**
71384
+ * @remarks
71385
+ * The tunnel configurations.
71386
+ *
71387
+ * You can specify parameters in the **TunnelOptionsSpecification** array when you modify the configurations of an IPsec-VPN connection in dual-tunnel mode. You can modify the configurations of the two tunnels of the IPsec-VPN connection.
71388
+ *
70466
71389
  * **if can be null:**
70467
71390
  * true
70468
71391
  */
@@ -70523,6 +71446,8 @@ export declare class ModifyVpnAttachmentAttributeResponseBody extends $dara.Mode
70523
71446
  * @remarks
70524
71447
  * The ID of the customer gateway associated with the IPsec-VPN connection.
70525
71448
  *
71449
+ * This parameter is returned only for single-tunnel IPsec-VPN connections.
71450
+ *
70526
71451
  * @example
70527
71452
  * cgw-p0w2jemrcj5u61un8****
70528
71453
  */
@@ -70548,10 +71473,12 @@ export declare class ModifyVpnAttachmentAttributeResponseBody extends $dara.Mode
70548
71473
  effectImmediately?: boolean;
70549
71474
  /**
70550
71475
  * @remarks
70551
- * Indicates whether the DPD feature is enabled for the IPsec-VPN connection. Valid values:
71476
+ * Indicates whether the DPD feature is enabled for the IPsec-VPN connection.
70552
71477
  *
70553
- * * **true**
70554
- * * **false**
71478
+ * * **true**: The feature is enabled.
71479
+ * * **false**: The feature is disabled.
71480
+ *
71481
+ * This parameter is returned only for single-tunnel IPsec-VPN connections.
70555
71482
  *
70556
71483
  * @example
70557
71484
  * true
@@ -70559,29 +71486,47 @@ export declare class ModifyVpnAttachmentAttributeResponseBody extends $dara.Mode
70559
71486
  enableDpd?: boolean;
70560
71487
  /**
70561
71488
  * @remarks
70562
- * Indicates whether NAT traversal is enabled for the IPsec-VPN connection. Valid values:
71489
+ * Specifies whether to enable NAT traversal for the IPsec-VPN connection.
70563
71490
  *
70564
- * * **true**
70565
- * * **false**
71491
+ * * **true**: The feature is enabled.
71492
+ * * **false**: The feature is disabled.
71493
+ *
71494
+ * This parameter is returned only for single-tunnel IPsec-VPN connections.
70566
71495
  *
70567
71496
  * @example
70568
71497
  * true
70569
71498
  */
70570
71499
  enableNatTraversal?: boolean;
71500
+ /**
71501
+ * @remarks
71502
+ * Specifies whether to enable Border Gateway Protocol (BGP) for tunnels.
71503
+ *
71504
+ * * **true**: The feature is enabled.
71505
+ * * **false**: The feature is disabled.
71506
+ *
71507
+ * This parameter is returned only by dual-tunnel IPsec-VPN connections.
71508
+ *
71509
+ * @example
71510
+ * false
71511
+ */
70571
71512
  enableTunnelsBgp?: boolean;
70572
71513
  /**
70573
71514
  * @remarks
70574
71515
  * The configuration of Phase 1 negotiations.
71516
+ *
71517
+ * **IkeConfig** parameters are returned only for single-tunnel IPsec-VPN connections.
70575
71518
  */
70576
71519
  ikeConfig?: ModifyVpnAttachmentAttributeResponseBodyIkeConfig;
70577
71520
  /**
70578
71521
  * @remarks
70579
71522
  * The configuration of Phase 2 negotiations.
71523
+ *
71524
+ * **IpsecConfig** parameters are returned only for single-tunnel IPsec-VPN connections.
70580
71525
  */
70581
71526
  ipsecConfig?: ModifyVpnAttachmentAttributeResponseBodyIpsecConfig;
70582
71527
  /**
70583
71528
  * @remarks
70584
- * The CIDR block of the VPC with which the data center can communicate.
71529
+ * The CIDR block on the Alibaba Cloud side that communicates with the on-premises data center is required, such as CIDR blocks of VPCs.
70585
71530
  *
70586
71531
  * @example
70587
71532
  * 10.1.1.0/24,10.1.2.0/24
@@ -70608,7 +71553,7 @@ export declare class ModifyVpnAttachmentAttributeResponseBody extends $dara.Mode
70608
71553
  networkType?: string;
70609
71554
  /**
70610
71555
  * @remarks
70611
- * The CIDR block of the data center with which the VPC can communicate.
71556
+ * The CIDR block of the on-premises data center that communicates with Alibaba Cloud is required.
70612
71557
  *
70613
71558
  * @example
70614
71559
  * 10.1.3.0/24,10.1.4.0/24
@@ -70655,15 +71600,25 @@ export declare class ModifyVpnAttachmentAttributeResponseBody extends $dara.Mode
70655
71600
  * ike_sa_not_established
70656
71601
  */
70657
71602
  status?: string;
71603
+ /**
71604
+ * @remarks
71605
+ * The tunnel configurations of the IPsec-VPN connection.
71606
+ *
71607
+ * **TunnelOptionsSpecification** parameters are returned only for dual-tunnel IPsec-VPN connections.
71608
+ */
70658
71609
  tunnelOptionsSpecification?: ModifyVpnAttachmentAttributeResponseBodyTunnelOptionsSpecification[];
70659
71610
  /**
70660
71611
  * @remarks
70661
- * The health check configuration of the IPsec-VPN connection.
71612
+ * The health check configurations of the IPsec-VPN connection.
71613
+ *
71614
+ * **VcoHealthCheck** parameters are returned only for single-tunnel IPsec-VPC connections.
70662
71615
  */
70663
71616
  vcoHealthCheck?: ModifyVpnAttachmentAttributeResponseBodyVcoHealthCheck;
70664
71617
  /**
70665
71618
  * @remarks
70666
- * The BGP configuration of the IPsec-VPN connection.
71619
+ * The BGP configurations of the IPsec-VPN connection.
71620
+ *
71621
+ * **VpnBgpConfig** parameters are returned only for single-tunnel IPsec-VPN connections.
70667
71622
  */
70668
71623
  vpnBgpConfig?: ModifyVpnAttachmentAttributeResponseBodyVpnBgpConfig;
70669
71624
  /**
@@ -70676,7 +71631,9 @@ export declare class ModifyVpnAttachmentAttributeResponseBody extends $dara.Mode
70676
71631
  vpnConnectionId?: string;
70677
71632
  /**
70678
71633
  * @remarks
70679
- * The ID of the VPN gateway associated with the IPsec-VPN connection.
71634
+ * The ID of the VPN gateway that is associated with the IPsec-VPN connection.
71635
+ *
71636
+ * **vpn-not-exist**: The IPsec-VPN connection is not associated with a VPN Gateway.
70680
71637
  *
70681
71638
  * @example
70682
71639
  * vpn-p0wa1c1018pmeb6cu****
@@ -70839,9 +71796,7 @@ export declare class ModifyVpnConnectionAttributeRequest extends $dara.Model {
70839
71796
  * * The key cannot contain space characters. The key must be 1 to 100 characters in length, and can contain digits, letters, and the following special characters: ``~!`@#$%^&*()_-+={}[]|;:\\",.<>/?``
70840
71797
  * * If you do not specify a pre-shared key, the system randomly generates a 16-bit string as the pre-shared key. You can call the [DescribeVpnConnection](https://help.aliyun.com/document_detail/2526951.html) operation to query the pre-shared key that is automatically generated by the system.
70841
71798
  *
70842
- * **
70843
- *
70844
- * **Description** The pre-shared key of the IPsec-VPN connection must be the same as the authentication key of the on-premises data center. Otherwise, connections between the on-premises data center and the VPN gateway cannot be established.
71799
+ * > The pre-shared key of the IPsec-VPN connection must be the same as the authentication key of the on-premises data center. Otherwise, connections between the on-premises data center and the VPN gateway cannot be established.
70845
71800
  *
70846
71801
  * * **IkeConfig.IkeVersion**: the version of the Internet Key Exchange (IKE) protocol. Valid values: **ikev1** and **ikev2**.
70847
71802
  *
@@ -71219,9 +72174,9 @@ export declare class ModifyVpnGatewayAttributeRequest extends $dara.Model {
71219
72174
  clientToken?: string;
71220
72175
  /**
71221
72176
  * @remarks
71222
- * The new description of the VPN gateway.
72177
+ * The new description of the VPN connection.
71223
72178
  *
71224
- * The description must be 1 to 100 characters in length and cannot start with `http://` or `https://`.
72179
+ * The description must be 1 to 100 characters in length.
71225
72180
  *
71226
72181
  * @example
71227
72182
  * test
@@ -71370,7 +72325,7 @@ export declare class ModifyVpnGatewayAttributeResponseBody extends $dara.Model {
71370
72325
  * @remarks
71371
72326
  * The IP address of the VPN gateway.
71372
72327
  *
71373
- * This parameter is returned only when the VPN gateway is a private VPN gateway and supports only the single-tunnel mode.
72328
+ * This parameter is returned only if the VPN gateway supports IPsec-VPN connections in single-tunnel mode.
71374
72329
  *
71375
72330
  * @example
71376
72331
  * 172.27.30.24
@@ -71393,11 +72348,6 @@ export declare class ModifyVpnGatewayAttributeResponseBody extends $dara.Model {
71393
72348
  */
71394
72349
  requestId?: string;
71395
72350
  /**
71396
- * @remarks
71397
- * VPN网关实例所属的资源组ID。
71398
- *
71399
- * 您可以调用[ListResourceGroups](https://help.aliyun.com/document_detail/158855.html)接口查询资源组信息。
71400
- *
71401
72351
  * @example
71402
72352
  * rg-acfmzs372yg****
71403
72353
  */
@@ -76614,11 +77564,11 @@ export declare class UpdateIpsecServerRequest extends $dara.Model {
76614
77564
  * @remarks
76615
77565
  * The pre-shared key.
76616
77566
  *
76617
- * The pre-shared key that is used for authentication between the IPsec-VPN server and the client. It must be 1 to 100 characters in length.
77567
+ * The pre-shared key that is used for authentication between the IPsec server and the client. The key must be 1 to 100 characters in length.
76618
77568
  *
76619
77569
  * You can call [ListIpsecServers](https://help.aliyun.com/document_detail/2794120.html) to query keys generated by the system.
76620
77570
  *
76621
- * > The pre-shared key of the IPsec server key must be the same as that of the client. Otherwise, the connection between the IPsec server and the client cannot be established.
77571
+ * > The pre-shared key of the IPsec server key must be the same as that of the client. Otherwise, the connection between the IPsec server and the client cannot be established.
76622
77572
  *
76623
77573
  * @example
76624
77574
  * Cfd123****
@@ -78527,7 +79477,8 @@ export default class Client extends OpenApi {
78527
79477
  * Default IPv6 gateways support only private communication. You can call the AllocateIpv6InternetBandwidth operation to purchase Internet bandwidth resources for an IPv6 address. This way, ECS instances in a VPC can access the Internet through the IPv6 address. IPv6 clients can also access the ECS instances over the Internet.
78528
79478
  *
78529
79479
  * @remarks
78530
- * You cannot repeatedly call the **AllocateIpv6InternetBandwidth** operation within a specific time period.
79480
+ * Before you call this operation, make sure that an ECS instance that supports IPv6 is created in a VPC that has an IPv6 CIDR block. For more information, see [Create a VPC with an IPv6 CIDR block](https://help.aliyun.com/document_detail/100540.html).
79481
+ * * You cannot repeatedly call **AllocateIpv6InternetBandwidth** within the specified period of time.
78531
79482
  *
78532
79483
  * @param request - AllocateIpv6InternetBandwidthRequest
78533
79484
  * @param runtime - runtime options for this request RuntimeOptions
@@ -78538,7 +79489,8 @@ export default class Client extends OpenApi {
78538
79489
  * Default IPv6 gateways support only private communication. You can call the AllocateIpv6InternetBandwidth operation to purchase Internet bandwidth resources for an IPv6 address. This way, ECS instances in a VPC can access the Internet through the IPv6 address. IPv6 clients can also access the ECS instances over the Internet.
78539
79490
  *
78540
79491
  * @remarks
78541
- * You cannot repeatedly call the **AllocateIpv6InternetBandwidth** operation within a specific time period.
79492
+ * Before you call this operation, make sure that an ECS instance that supports IPv6 is created in a VPC that has an IPv6 CIDR block. For more information, see [Create a VPC with an IPv6 CIDR block](https://help.aliyun.com/document_detail/100540.html).
79493
+ * * You cannot repeatedly call **AllocateIpv6InternetBandwidth** within the specified period of time.
78542
79494
  *
78543
79495
  * @param request - AllocateIpv6InternetBandwidthRequest
78544
79496
  * @returns AllocateIpv6InternetBandwidthResponse
@@ -80555,9 +81507,12 @@ export default class Client extends OpenApi {
80555
81507
  * Creates an IPsec-VPN connection. After you create the IPsec-VPN connection, you can associate the IPsec-VPN connection with a transit router.
80556
81508
  *
80557
81509
  * @remarks
80558
- * By default, an IPsec-VPN connection created by calling the `CreateVpnAttachment` operation is not associated with a resource. You can associate an IPsec-VPN connection with a transit router by calling the [CreateTransitRouterVpnAttachment](https://help.aliyun.com/document_detail/443993.html) operation.
81510
+ * By default, the IPsec-VPN connection created by calling the `CreateVpnAttachment` operation is not bound to any resources. You can call the [CreateTransitRouterVpnAttachment](https://help.aliyun.com/document_detail/443993.html) operation to bind the IPsec-VPN connection to a transit router.
81511
+ * * If you want to associate an IPsec-VPN connection with a transit router, you can create a dual-tunnel connection in some regions. For more information, see [Dual-tunnel IPsec-VPN connections](https://help.aliyun.com/document_detail/2853535.html).
81512
+ * * When you create a IPsec-VPN connection in dual tunnel mode, you can configure the following request parameters in addition to the required parameters: **ClientToken**, **Name**, **NetworkType**, **EffectImmediately**, **AutoConfigRoute**, **Tags** array, **ResourceGroupId**, **TunnelOptionsSpecification** array, and **EnableTunnelsBgp**.
81513
+ * * When you create a IPsec-VPN connection in single tunnel mode, you can configure the following request parameters in addition to the required parameters: **ClientToken**, **CustomerGatewayId**, **NetworkType**, **Name**, **EffectImmediately**, **IkeConfig**, **IpsecConfig**, **HealthCheckConfig**, **AutoConfigRoute**, **EnableDpd**, **EnableNatTraversal**, **BgpConfig**, **Tags** array, and **ResourceGroupId**.
80559
81514
  * ### [](#)Prerequisites
80560
- * Before you create an IPsec-VPN connection, make sure that you created a customer gateway in the region where you want to create the IPsec-VPN connection. For more information, see [CreateCustomerGateway](https://help.aliyun.com/document_detail/120368.html).
81515
+ * Before you create an IPsec-VPN connection, you must create a customer gateway in the region where you want to create the IPsec-VPN connection. For more information, see [CreateCustomerGateway](https://help.aliyun.com/document_detail/120368.html).
80561
81516
  * If you want to add BGP configurations to an IPsec-VPN connection, make sure that an autonomous system number (ASN) is assigned to the customer gateway.
80562
81517
  *
80563
81518
  * @param request - CreateVpnAttachmentRequest
@@ -80569,9 +81524,12 @@ export default class Client extends OpenApi {
80569
81524
  * Creates an IPsec-VPN connection. After you create the IPsec-VPN connection, you can associate the IPsec-VPN connection with a transit router.
80570
81525
  *
80571
81526
  * @remarks
80572
- * By default, an IPsec-VPN connection created by calling the `CreateVpnAttachment` operation is not associated with a resource. You can associate an IPsec-VPN connection with a transit router by calling the [CreateTransitRouterVpnAttachment](https://help.aliyun.com/document_detail/443993.html) operation.
81527
+ * By default, the IPsec-VPN connection created by calling the `CreateVpnAttachment` operation is not bound to any resources. You can call the [CreateTransitRouterVpnAttachment](https://help.aliyun.com/document_detail/443993.html) operation to bind the IPsec-VPN connection to a transit router.
81528
+ * * If you want to associate an IPsec-VPN connection with a transit router, you can create a dual-tunnel connection in some regions. For more information, see [Dual-tunnel IPsec-VPN connections](https://help.aliyun.com/document_detail/2853535.html).
81529
+ * * When you create a IPsec-VPN connection in dual tunnel mode, you can configure the following request parameters in addition to the required parameters: **ClientToken**, **Name**, **NetworkType**, **EffectImmediately**, **AutoConfigRoute**, **Tags** array, **ResourceGroupId**, **TunnelOptionsSpecification** array, and **EnableTunnelsBgp**.
81530
+ * * When you create a IPsec-VPN connection in single tunnel mode, you can configure the following request parameters in addition to the required parameters: **ClientToken**, **CustomerGatewayId**, **NetworkType**, **Name**, **EffectImmediately**, **IkeConfig**, **IpsecConfig**, **HealthCheckConfig**, **AutoConfigRoute**, **EnableDpd**, **EnableNatTraversal**, **BgpConfig**, **Tags** array, and **ResourceGroupId**.
80573
81531
  * ### [](#)Prerequisites
80574
- * Before you create an IPsec-VPN connection, make sure that you created a customer gateway in the region where you want to create the IPsec-VPN connection. For more information, see [CreateCustomerGateway](https://help.aliyun.com/document_detail/120368.html).
81532
+ * Before you create an IPsec-VPN connection, you must create a customer gateway in the region where you want to create the IPsec-VPN connection. For more information, see [CreateCustomerGateway](https://help.aliyun.com/document_detail/120368.html).
80575
81533
  * If you want to add BGP configurations to an IPsec-VPN connection, make sure that an autonomous system number (ASN) is assigned to the customer gateway.
80576
81534
  *
80577
81535
  * @param request - CreateVpnAttachmentRequest
@@ -81133,9 +82091,9 @@ export default class Client extends OpenApi {
81133
82091
  *
81134
82092
  * @remarks
81135
82093
  * **DeleteIpsecServer** is an asynchronous operation. After a request is sent, the system returns a request ID and runs the task in the background. You can call [DescribeVpnGateway](https://help.aliyun.com/document_detail/2794055.html) to query the status of the task.
81136
- * * If a VPN gateway is in the **updating** state, the IPsec server is being deleted.
81137
- * * If a VPN gateway is in the **active** state, the IPsec server is deleted.
81138
- * * You cannot repeatedly call **DeleteIpsecServer** to delete an IPsec server from a VPN gateway within the specified period of time.
82094
+ * * If the VPN gateway is in the **updating** state, the IPsec server is being deleted.
82095
+ * * If the VPN gateway is in the **active** state, the IPsec server is deleted.
82096
+ * * You cannot call **DeleteIpsecServer** within the specified period of time.
81139
82097
  *
81140
82098
  * @param request - DeleteIpsecServerRequest
81141
82099
  * @param runtime - runtime options for this request RuntimeOptions
@@ -81147,9 +82105,9 @@ export default class Client extends OpenApi {
81147
82105
  *
81148
82106
  * @remarks
81149
82107
  * **DeleteIpsecServer** is an asynchronous operation. After a request is sent, the system returns a request ID and runs the task in the background. You can call [DescribeVpnGateway](https://help.aliyun.com/document_detail/2794055.html) to query the status of the task.
81150
- * * If a VPN gateway is in the **updating** state, the IPsec server is being deleted.
81151
- * * If a VPN gateway is in the **active** state, the IPsec server is deleted.
81152
- * * You cannot repeatedly call **DeleteIpsecServer** to delete an IPsec server from a VPN gateway within the specified period of time.
82108
+ * * If the VPN gateway is in the **updating** state, the IPsec server is being deleted.
82109
+ * * If the VPN gateway is in the **active** state, the IPsec server is deleted.
82110
+ * * You cannot call **DeleteIpsecServer** within the specified period of time.
81153
82111
  *
81154
82112
  * @param request - DeleteIpsecServerRequest
81155
82113
  * @returns DeleteIpsecServerResponse
@@ -82552,7 +83510,7 @@ export default class Client extends OpenApi {
82552
83510
  */
82553
83511
  describeIpv6Addresses(request: DescribeIpv6AddressesRequest): Promise<DescribeIpv6AddressesResponse>;
82554
83512
  /**
82555
- * 查询创建的仅主动出规则。
83513
+ * Queries egress-only rules.
82556
83514
  *
82557
83515
  * @param request - DescribeIpv6EgressOnlyRulesRequest
82558
83516
  * @param runtime - runtime options for this request RuntimeOptions
@@ -82560,7 +83518,7 @@ export default class Client extends OpenApi {
82560
83518
  */
82561
83519
  describeIpv6EgressOnlyRulesWithOptions(request: DescribeIpv6EgressOnlyRulesRequest, runtime: $dara.RuntimeOptions): Promise<DescribeIpv6EgressOnlyRulesResponse>;
82562
83520
  /**
82563
- * 查询创建的仅主动出规则。
83521
+ * Queries egress-only rules.
82564
83522
  *
82565
83523
  * @param request - DescribeIpv6EgressOnlyRulesRequest
82566
83524
  * @returns DescribeIpv6EgressOnlyRulesResponse
@@ -83266,12 +84224,16 @@ export default class Client extends OpenApi {
83266
84224
  */
83267
84225
  describeVpnRouteEntries(request: DescribeVpnRouteEntriesRequest): Promise<DescribeVpnRouteEntriesResponse>;
83268
84226
  /**
84227
+ * Queries the log entries of an SSL server.
84228
+ *
83269
84229
  * @param request - DescribeVpnSslServerLogsRequest
83270
84230
  * @param runtime - runtime options for this request RuntimeOptions
83271
84231
  * @returns DescribeVpnSslServerLogsResponse
83272
84232
  */
83273
84233
  describeVpnSslServerLogsWithOptions(request: DescribeVpnSslServerLogsRequest, runtime: $dara.RuntimeOptions): Promise<DescribeVpnSslServerLogsResponse>;
83274
84234
  /**
84235
+ * Queries the log entries of an SSL server.
84236
+ *
83275
84237
  * @param request - DescribeVpnSslServerLogsRequest
83276
84238
  * @returns DescribeVpnSslServerLogsResponse
83277
84239
  */
@@ -83349,7 +84311,7 @@ export default class Client extends OpenApi {
83349
84311
  * Diagnoses a VPN gateway.
83350
84312
  *
83351
84313
  * @remarks
83352
- * Only VPN gateways in specific regions support the quick diagnostics feature. For more information about the supported regions, see [Supported regions](https://help.aliyun.com/document_detail/430697.html).
84314
+ * VPN网关发起诊断
83353
84315
  *
83354
84316
  * @param request - DiagnoseVpnGatewayRequest
83355
84317
  * @param runtime - runtime options for this request RuntimeOptions
@@ -83360,7 +84322,7 @@ export default class Client extends OpenApi {
83360
84322
  * Diagnoses a VPN gateway.
83361
84323
  *
83362
84324
  * @remarks
83363
- * Only VPN gateways in specific regions support the quick diagnostics feature. For more information about the supported regions, see [Supported regions](https://help.aliyun.com/document_detail/430697.html).
84325
+ * VPN网关发起诊断
83364
84326
  *
83365
84327
  * @param request - DiagnoseVpnGatewayRequest
83366
84328
  * @returns DiagnoseVpnGatewayResponse
@@ -83920,12 +84882,16 @@ export default class Client extends OpenApi {
83920
84882
  */
83921
84883
  listGeographicSubRegions(): Promise<ListGeographicSubRegionsResponse>;
83922
84884
  /**
84885
+ * Queries the logs of an IPsec server.
84886
+ *
83923
84887
  * @param request - ListIpsecServerLogsRequest
83924
84888
  * @param runtime - runtime options for this request RuntimeOptions
83925
84889
  * @returns ListIpsecServerLogsResponse
83926
84890
  */
83927
84891
  listIpsecServerLogsWithOptions(request: ListIpsecServerLogsRequest, runtime: $dara.RuntimeOptions): Promise<ListIpsecServerLogsResponse>;
83928
84892
  /**
84893
+ * Queries the logs of an IPsec server.
84894
+ *
83929
84895
  * @param request - ListIpsecServerLogsRequest
83930
84896
  * @returns ListIpsecServerLogsResponse
83931
84897
  */
@@ -85222,13 +86188,13 @@ export default class Client extends OpenApi {
85222
86188
  * Modifies the configuration of an IPsec-VPN connection.
85223
86189
  *
85224
86190
  * @remarks
85225
- * **ModifyVpnAttachmentAttribute** is an asynchronous operation. After a request is sent, the system returns a request ID and runs the task to modify the configuration of an IPsec-VPN connection in the background. You can call the [DescribeVpnConnection](https://help.aliyun.com/document_detail/53046.html) operation to query the status of the task.
85226
- * * If the IPsec-VPN connection is in the **updating** state, the configuration of the IPsec-VPN connection is being modified.
85227
- * * If the IPsec-VPN connection is in the **attached** state, the configuration of the IPsec-VPN connection is modified.
85228
- * * You cannot call the **ModifyVpnAttachmentAttribute** operation again on the same IPsec-VPN connection before the previous operation is complete.
85229
- * * When you call the **ModifyVpnAttachmentAttribute** operation, take note of the following items:
85230
- * * If the IPsec-VPN connection is associated with a transit router, you cannot change the type of the gateway connected to the IPsec-VPN connection.
85231
- * * If the IPsec-VPN connection is not associated with a resource, you cannot change the type of the gateway connected to the IPsec-VPN connection or the customer gateway connected to the IPsec-VPN connection.
86191
+ * When you modify a IPsec-VPN connection in dual-tunnel mode, you can configure the following parameters in addition to the required request parameters: **ClientToken**, **Name**, **LocalSubnet**, **RemoteSubnet**, **EffectImmediately**, **AutoConfigRoute**, **TunnelOptionsSpecification** array, and **EnableTunnelsBgp**.
86192
+ * * When you modify a IPsec-VPN connection in single tunnel mode, you can configure the following parameters in addition to the required request parameters: **ClientToken**, **Name**, **LocalSubnet**, **RemoteSubnet**, **EffectImmediately**, **IkeConfig**, **IpsecConfig**, **HealthCheckConfig**, **AutoConfigRoute**, **EnableDpd**, **EnableNatTraversal**, **BgpConfig**, and **CustomerGatewayId**.
86193
+ * * **ModifyVpnAttachmentAttribute** is an asynchronous operation. After a request is sent, the system returns a request ID and runs the task in the background. You can call the [DescribeVpnConnection](https://help.aliyun.com/document_detail/53046.html) operation to query the status of the task:
86194
+ * * If the IPsec-VPN connection is in the **updating** state, the IPsec-VPN connection is being modified.
86195
+ * * If the IPsec-VPN connection is in the **attached** state, the IPsec-VPN connection is modified.
86196
+ * * You cannot concurrently call **ModifyVpnAttachmentAttribute** within the specified period of time.
86197
+ * * You cannot call **ModifyVpnAttachmentAttribute** to modify the gateway type of an IPsec-VPN connection.
85232
86198
  *
85233
86199
  * @param request - ModifyVpnAttachmentAttributeRequest
85234
86200
  * @param runtime - runtime options for this request RuntimeOptions
@@ -85239,13 +86205,13 @@ export default class Client extends OpenApi {
85239
86205
  * Modifies the configuration of an IPsec-VPN connection.
85240
86206
  *
85241
86207
  * @remarks
85242
- * **ModifyVpnAttachmentAttribute** is an asynchronous operation. After a request is sent, the system returns a request ID and runs the task to modify the configuration of an IPsec-VPN connection in the background. You can call the [DescribeVpnConnection](https://help.aliyun.com/document_detail/53046.html) operation to query the status of the task.
85243
- * * If the IPsec-VPN connection is in the **updating** state, the configuration of the IPsec-VPN connection is being modified.
85244
- * * If the IPsec-VPN connection is in the **attached** state, the configuration of the IPsec-VPN connection is modified.
85245
- * * You cannot call the **ModifyVpnAttachmentAttribute** operation again on the same IPsec-VPN connection before the previous operation is complete.
85246
- * * When you call the **ModifyVpnAttachmentAttribute** operation, take note of the following items:
85247
- * * If the IPsec-VPN connection is associated with a transit router, you cannot change the type of the gateway connected to the IPsec-VPN connection.
85248
- * * If the IPsec-VPN connection is not associated with a resource, you cannot change the type of the gateway connected to the IPsec-VPN connection or the customer gateway connected to the IPsec-VPN connection.
86208
+ * When you modify a IPsec-VPN connection in dual-tunnel mode, you can configure the following parameters in addition to the required request parameters: **ClientToken**, **Name**, **LocalSubnet**, **RemoteSubnet**, **EffectImmediately**, **AutoConfigRoute**, **TunnelOptionsSpecification** array, and **EnableTunnelsBgp**.
86209
+ * * When you modify a IPsec-VPN connection in single tunnel mode, you can configure the following parameters in addition to the required request parameters: **ClientToken**, **Name**, **LocalSubnet**, **RemoteSubnet**, **EffectImmediately**, **IkeConfig**, **IpsecConfig**, **HealthCheckConfig**, **AutoConfigRoute**, **EnableDpd**, **EnableNatTraversal**, **BgpConfig**, and **CustomerGatewayId**.
86210
+ * * **ModifyVpnAttachmentAttribute** is an asynchronous operation. After a request is sent, the system returns a request ID and runs the task in the background. You can call the [DescribeVpnConnection](https://help.aliyun.com/document_detail/53046.html) operation to query the status of the task:
86211
+ * * If the IPsec-VPN connection is in the **updating** state, the IPsec-VPN connection is being modified.
86212
+ * * If the IPsec-VPN connection is in the **attached** state, the IPsec-VPN connection is modified.
86213
+ * * You cannot concurrently call **ModifyVpnAttachmentAttribute** within the specified period of time.
86214
+ * * You cannot call **ModifyVpnAttachmentAttribute** to modify the gateway type of an IPsec-VPN connection.
85249
86215
  *
85250
86216
  * @param request - ModifyVpnAttachmentAttributeRequest
85251
86217
  * @returns ModifyVpnAttachmentAttributeResponse
@@ -86317,11 +87283,11 @@ export default class Client extends OpenApi {
86317
87283
  * Modifies the configuration of an IPsec server.
86318
87284
  *
86319
87285
  * @remarks
86320
- * If you modify only the **IpsecServerName** parameter, this operation is synchronous. If you modify parameters other than **IpsecServerName**, this operation is asynchronous.
86321
- * * When the **UpdateIpsecServer** operation is asynchronous, the system returns a request ID after you send a request to call this operation and the IPsec server is being modified in the backend. You can call [DescribeVpnGateway](https://help.aliyun.com/document_detail/2794055.html) to query the status of a VPN gateway.
86322
- * * If the VPN gateway is in the **updating** state, the configuration of the IPsec server is being modified.
86323
- * * If the VPN gateway is in the **active** state, the configuration of the IPsec server is modified.
86324
- * * You cannot repeatedly call the **UpdateIpsecServer** operation for the same VPN gateway within the specified period of time.
87286
+ * If you modify only **IpsecServerName** of the IPsec server, this operation is synchronous. If you modify other parameters besides **IpsecServerName**, this operation is asynchronous.
87287
+ * * If **UpdateIpsecServer** is an asynchronous operation, after a request is sent, the system returns a request ID and runs the task in the background. You can call the [DescribeVpnGateway](https://help.aliyun.com/document_detail/2794055.html) operation to query the status of the task.
87288
+ * * If the VPN gateway is in the **updating** state, the IPsec server is being modified.
87289
+ * * If the VPN gateway is in the **active** state, the IPsec server is modified.
87290
+ * * You cannot repeatedly call **UpdateIpsecServer** within the specified period of time.
86325
87291
  *
86326
87292
  * @param request - UpdateIpsecServerRequest
86327
87293
  * @param runtime - runtime options for this request RuntimeOptions
@@ -86332,11 +87298,11 @@ export default class Client extends OpenApi {
86332
87298
  * Modifies the configuration of an IPsec server.
86333
87299
  *
86334
87300
  * @remarks
86335
- * If you modify only the **IpsecServerName** parameter, this operation is synchronous. If you modify parameters other than **IpsecServerName**, this operation is asynchronous.
86336
- * * When the **UpdateIpsecServer** operation is asynchronous, the system returns a request ID after you send a request to call this operation and the IPsec server is being modified in the backend. You can call [DescribeVpnGateway](https://help.aliyun.com/document_detail/2794055.html) to query the status of a VPN gateway.
86337
- * * If the VPN gateway is in the **updating** state, the configuration of the IPsec server is being modified.
86338
- * * If the VPN gateway is in the **active** state, the configuration of the IPsec server is modified.
86339
- * * You cannot repeatedly call the **UpdateIpsecServer** operation for the same VPN gateway within the specified period of time.
87301
+ * If you modify only **IpsecServerName** of the IPsec server, this operation is synchronous. If you modify other parameters besides **IpsecServerName**, this operation is asynchronous.
87302
+ * * If **UpdateIpsecServer** is an asynchronous operation, after a request is sent, the system returns a request ID and runs the task in the background. You can call the [DescribeVpnGateway](https://help.aliyun.com/document_detail/2794055.html) operation to query the status of the task.
87303
+ * * If the VPN gateway is in the **updating** state, the IPsec server is being modified.
87304
+ * * If the VPN gateway is in the **active** state, the IPsec server is modified.
87305
+ * * You cannot repeatedly call **UpdateIpsecServer** within the specified period of time.
86340
87306
  *
86341
87307
  * @param request - UpdateIpsecServerRequest
86342
87308
  * @returns UpdateIpsecServerResponse