@alicloud/rds20140815 16.0.0 → 16.0.1

package/src/models/CreateGadInstanceMemberRequest.ts

@@ -5,9 +5,9 @@ import * as $dara from '@darabonba/typescript';
 export class CreateGadInstanceMemberRequestUnitNode extends $dara.Model {
   /**
    * @remarks
-   * The name of the new unit node. The name must meet the following requirements:
-   * - The name must be **2 to 255** characters in length.
-   * - The name must start with a Chinese character or a letter. It can contain digits, Chinese characters, letters, underscores (_), and hyphens (-).
+   * The name of the new unit node. The naming rules are as follows:
+   * - The name must be **2** to **255** characters in length.
+   * - The name must start with a letter or a Chinese character and can contain letters, digits, Chinese characters, underscores (_), and hyphens (-).
    * - The name cannot start with `http://` or `https://`.
    * 
    * @example
@@ -16,7 +16,7 @@ export class CreateGadInstanceMemberRequestUnitNode extends $dara.Model {
   DBInstanceDescription?: string;
   /**
    * @remarks
-   * The storage capacity of the new unit node. Unit: GB. The value is incremented in steps of 5 GB. For the value range, see [Instance types](https://help.aliyun.com/document_detail/26312.html). You can also call the DescribeAvailableResource operation to query the available storage capacity range for the target instance type.
+   * The storage capacity of the new unit node. Unit: GB. The storage capacity increases in increments of 5 GB. For more information about the valid values, see [Instance types](https://help.aliyun.com/document_detail/26312.html). You can also call the DescribeAvailableResource operation to query the available storage capacity range for the target instance type.
    * 
    * @example
    * 20
@@ -27,10 +27,10 @@ export class CreateGadInstanceMemberRequestUnitNode extends $dara.Model {
    * The instance storage type. Valid values:
    * 
    * * **local_ssd**: local SSD
-   * * **cloud_ssd**: standard SSD cloud disk
-   * * **cloud_essd**: PL1 ESSD cloud disk
-   * * **cloud_essd2**: PL2 ESSD cloud disk
-   * * **cloud_essd3**: PL3 ESSD cloud disk
+   * * **cloud_ssd**: standard SSD
+   * * **cloud_essd**: PL1 ESSD
+   * * **cloud_essd2**: PL2 ESSD
+   * * **cloud_essd3**: PL3 ESSD
    * 
    * @example
    * cloud_essd
@@ -38,7 +38,7 @@ export class CreateGadInstanceMemberRequestUnitNode extends $dara.Model {
   DBInstanceStorageType?: string;
   /**
    * @remarks
-   * The instance type of the new unit node. For more information, see [Primary instance types](https://help.aliyun.com/document_detail/26312.html). You can also call the DescribeAvailableResource operation to query the available instance types in the target region.
+   * The instance type of the new unit node. For more information about the valid values, see [Primary instance types](https://help.aliyun.com/document_detail/26312.html). You can also call the DescribeAvailableResource operation to query the available instance types in the target region.
    * 
    * @example
    * rds.mysql.t1.small
@@ -46,10 +46,10 @@ export class CreateGadInstanceMemberRequestUnitNode extends $dara.Model {
   dbInstanceClass?: string;
   /**
    * @remarks
-   * The conflict resolution policy used when a primary key conflict occurs during data synchronization for the new unit node. Valid values:
-   * * **overwrite**: Overwrites the conflicting primary key on the destination node.
-   * * **interrupt**: Stops the synchronization task and reports an error.
-   * * **ignore**: Overwrites the conflicting primary key on the current node.
+   * The resolution policy for primary key conflicts that occur during synchronization on the new unit node. Valid values:
+   * * **overwrite**: Overwrites the conflicting primary keys in the destination node.
+   * * **interrupt**: Interrupts the synchronization task, reports an error, and exits.
+   * * **ignore**: Overwrites the conflicting primary keys in the current node.
    * 
    * This parameter is required.
    * 
@@ -95,7 +95,7 @@ export class CreateGadInstanceMemberRequestUnitNode extends $dara.Model {
   engineVersion?: string;
   /**
    * @remarks
-   * The region ID of the new unit node (secondary node). You can call DescribeRegions to query the region ID.
+   * The region ID of the new unit node (secondary node). You can call the DescribeRegions operation to query the region ID.
    * 
    * This parameter is required.
    * 
@@ -105,9 +105,9 @@ export class CreateGadInstanceMemberRequestUnitNode extends $dara.Model {
   regionID?: string;
   /**
    * @remarks
-   * The [IP whitelist](https://help.aliyun.com/document_detail/43185.html) of the new unit node. Separate multiple entries with commas (,). Entries cannot be duplicated. A maximum of 1,000 entries are allowed. The following two formats are supported:
+   * The [IP address whitelist](https://help.aliyun.com/document_detail/43185.html) of the new unit node. Separate multiple entries with commas (,). Duplicate entries are not allowed. A maximum of 1,000 entries can be added. The following two formats are supported:
    * * IP address format, such as `10.10.XX.XX`.
-   * * CIDR format, such as `10.10.XX.XX/24` (Classless Inter-Domain Routing, where **24** indicates the prefix length, ranging from **1 to 32**).
+   * * CIDR format, such as `10.10.XX.XX/24`. **24** indicates the length of the prefix in the IP address, and the valid values are **1** to **32**.
    * 
    * @example
    * 10.10.XX.XX
@@ -125,7 +125,7 @@ export class CreateGadInstanceMemberRequestUnitNode extends $dara.Model {
   vSwitchID?: string;
   /**
    * @remarks
-   * The virtual private cloud (VPC) ID of the new unit node.
+   * The VPC ID of the new unit node.
    * 
    * This parameter is required.
    * 
@@ -135,7 +135,7 @@ export class CreateGadInstanceMemberRequestUnitNode extends $dara.Model {
   vpcID?: string;
   /**
    * @remarks
-   * The zone ID of the new unit node. You can call DescribeRegions to query the zone ID.
+   * The zone ID of the new unit node. You can call the DescribeRegions operation to query the zone ID.
    * 
    * @example
    * cn-hangzhou-j
@@ -143,9 +143,9 @@ export class CreateGadInstanceMemberRequestUnitNode extends $dara.Model {
   zoneID?: string;
   /**
    * @remarks
-   * The zone ID of the secondary node for the new unit node. You can call DescribeRegions to query the zone ID.
-   * * If this value is the same as the **ZoneId** of the current unit node, the single-zone deployment is used.
-   * * If this value is different from the **ZoneId** of the current unit node, the multi-zone deployment is used.
+   * The zone ID of the secondary node for the new unit node. You can call the DescribeRegions operation to query the zone ID where the node is active.
+   * * If the value is the same as the **ZoneId** of the current unit node, it is a single-zone deployment.
+   * * If the value is different from the **ZoneId** of the current unit node, it is a multi-zone deployment.
    * 
    * @example
    * cn-hangzhou-j
@@ -153,9 +153,9 @@ export class CreateGadInstanceMemberRequestUnitNode extends $dara.Model {
   zoneIDSlave1?: string;
   /**
    * @remarks
-   * The zone ID of the logger node for the new unit node. You can call DescribeRegions to query the zone ID.
-   * * If this value is the same as the **ZoneId** of the current unit node, the single-zone deployment is used.
-   * * If this value is different from the **ZoneId** of the current unit node, the multi-zone deployment is used.
+   * The zone ID of the logger node for the new unit node. You can call the DescribeRegions operation to query the zone ID where the node is active.
+   * * If the value is the same as the **ZoneId** of the current unit node, it is a single-zone deployment.
+   * * If the value is different from the **ZoneId** of the current unit node, it is a multi-zone deployment.
    * 
    * @example
    * cn-hangzhou-j
@@ -213,7 +213,7 @@ export class CreateGadInstanceMemberRequestUnitNode extends $dara.Model {
 export class CreateGadInstanceMemberRequest extends $dara.Model {
   /**
    * @remarks
-   * The ID of the central node. You can call DescribeGadInstances to query the central node ID.
+   * The ID of the central node. You can call the DescribeGadInstances operation to query the ID.
    * 
    * This parameter is required.
    * 
@@ -223,7 +223,7 @@ export class CreateGadInstanceMemberRequest extends $dara.Model {
   centralDBInstanceId?: string;
   /**
    * @remarks
-   * The privileged account of the central node. You can call DescribeAccounts to query the account.
+   * The privileged account of the central node. You can call the DescribeAccounts operation to query the account.
    * 
    * This parameter is required.
    * 
@@ -233,7 +233,7 @@ export class CreateGadInstanceMemberRequest extends $dara.Model {
   centralRdsDtsAdminAccount?: string;
   /**
    * @remarks
-   * The password of the privileged account for the central node.
+   * The password of the privileged account of the central node.
    * 
    * This parameter is required.
    * 
@@ -243,7 +243,7 @@ export class CreateGadInstanceMemberRequest extends $dara.Model {
   centralRdsDtsAdminPassword?: string;
   /**
    * @remarks
-   * The region ID of the central node (primary node). You can call DescribeRegions to query the region ID.
+   * The region ID of the central node (primary node). You can call the DescribeRegions operation to query the region ID.
    * 
    * This parameter is required.
    * 
@@ -253,10 +253,10 @@ export class CreateGadInstanceMemberRequest extends $dara.Model {
   centralRegionId?: string;
   /**
    * @remarks
-   * A JSON array of database information from the central node. All databases in the array are synchronized to the current unit node. Metric description:
-   * * **name**: the database name.
-   * * **all**: specifies whether to synchronize all data in the current database or table. Valid values: **true** | **false**.
-   * * **Table**: the table name. If the **all** parameter is set to **false**, you must also specify the table names to be synchronized in the JSON array.
+   * The JSON array of database information in the central node. All database information in the array is synchronized to the current unit node. Parameter description:
+   * * **name**: the name of the database.
+   * * **all**: specifies whether to synchronize all data in the current database or table. Valid values: **true** and **false**.
+   * * **Table**: the name of the table. If the **all** parameter is set to **false**, you must also include the names of the tables to be synchronized in the JSON array.
    * 
    * Example: `{
    *    "testdb": {
@@ -274,7 +274,7 @@ export class CreateGadInstanceMemberRequest extends $dara.Model {
    *     }
    *   }
    * }`
-   * > For more information, see [Objects for migration, synchronization, or subscribe](https://help.aliyun.com/document_detail/209545.html).
+   * > For more information, see [Objects for migration, synchronization, or subscription](https://help.aliyun.com/document_detail/209545.html).
    * 
    * This parameter is required.
    * 
@@ -284,7 +284,7 @@ export class CreateGadInstanceMemberRequest extends $dara.Model {
   DBList?: string;
   /**
    * @remarks
-   * The ID of the ApsaraDB RDS global active database cluster. You can call DescribeGadInstances to query the cluster ID.
+   * The ID of the ApsaraDB RDS global active database cluster. You can call the DescribeGadInstances operation to query the ID.
    * 
    * This parameter is required.
    * 

package/src/models/CreateGadinstanceRequest.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class CreateGADInstanceRequestTag extends $dara.Model {
   /**
    * @remarks
-   * The tag key. You can create up to N tag keys at a time. Valid values of N: **1 to 20**. The tag key cannot be an empty string.
+   * The tag key. You can create up to N tag keys at a time. Valid values of N: **1** to **20**. Empty strings are not allowed.
    * 
    * @example
    * testkey1
@@ -13,7 +13,7 @@ export class CreateGADInstanceRequestTag extends $dara.Model {
   key?: string;
   /**
    * @remarks
-   * The tag value that corresponds to the tag key. You can create up to N tag values at a time. Valid values of N: **1 to 20**. The tag value can be an empty string.
+   * The tag value that corresponds to the tag key. You can create up to N tag values at a time. Valid values of N: **1** to **20**. Empty strings are allowed.
    * 
    * @example
    * testvalue1
@@ -45,9 +45,9 @@ export class CreateGADInstanceRequestTag extends $dara.Model {
 export class CreateGADInstanceRequestUnitNode extends $dara.Model {
   /**
    * @remarks
-   * The name of the new unit node. The name must meet the following requirements:
-   * - The name must be **2 to 255** characters in length.
-   * - The name must start with a letter or a Chinese character. It can contain digits, Chinese characters, letters, underscores (_), and hyphens (-).
+   * The name of the new unit node. The name must meet the following rules:
+   * - The name must be **2** to **255** characters in length.
+   * - The name must start with a letter or a Chinese character and can contain letters, Chinese characters, digits, underscores (_), and hyphens (-).
    * - The name cannot start with `http://` or `https://`.
    * 
    * @example
@@ -56,7 +56,7 @@ export class CreateGADInstanceRequestUnitNode extends $dara.Model {
   DBInstanceDescription?: string;
   /**
    * @remarks
-   * The storage capacity of the new unit node. Unit: GB. The value is incremented in 5 GB increments. For the value range, see [Primary instance types](https://help.aliyun.com/document_detail/26312.html). You can also call the DescribeAvailableResource operation to query the available storage capacity range for the target instance type.
+   * The storage capacity of the new unit node. Unit: GB. The storage capacity increases in increments of 5 GB. For more information about the valid values, see [Primary instance types](https://help.aliyun.com/document_detail/26312.html). You can also call the DescribeAvailableResource operation to query the available storage capacity range for the target instance type.
    * 
    * @example
    * 20
@@ -66,14 +66,14 @@ export class CreateGADInstanceRequestUnitNode extends $dara.Model {
    * @remarks
    * The instance storage type. Valid values:
    * * **local_ssd**: Premium Local SSD (recommended).
-   * * **cloud_ssd**: standard SSD (not recommended because standard SSDs are no longer available for purchase in some regions).
+   * * **cloud_ssd**: standard SSD (not recommended, and no longer available in some regions).
    * * **cloud_essd**: PL1 ESSD.
    * * **cloud_essd2**: PL2 ESSD.
    * * **cloud_essd3**: PL3 ESSD.
    * 
-   * The default value of this parameter is determined by the instance type specified in the **DBInstanceClass** parameter:
-   * - If the instance type is a Premium Local SSD instance type, the default value is **local_ssd**.
-   * - If the instance type is a cloud disk instance type, the default value is **cloud_essd**.
+   * The default value of this parameter is automatically determined based on the instance type code specified in the **DBInstanceClass** parameter:
+   * - If the instance type code is for a Premium Local SSD, the default value is **local_ssd**.
+   * - If the instance type code is for a cloud disk, the default value is **cloud_essd**.
    * 
    * @example
    * cloud_essd2
@@ -81,7 +81,7 @@ export class CreateGADInstanceRequestUnitNode extends $dara.Model {
   DBInstanceStorageType?: string;
   /**
    * @remarks
-   * The instance type of the new unit node. For more information, see [Primary instance types](https://help.aliyun.com/document_detail/26312.html). You can also call the DescribeAvailableResource operation to query the available instance types in the target region.
+   * The instance type of the new unit node. For more information about the valid values, see [Primary instance types](https://help.aliyun.com/document_detail/26312.html). You can also call the DescribeAvailableResource operation to query the available instance types in the target region.
    * 
    * @example
    * rds.mysql.t1.small
@@ -89,10 +89,10 @@ export class CreateGADInstanceRequestUnitNode extends $dara.Model {
   dbInstanceClass?: string;
   /**
    * @remarks
-   * The conflict resolution policy used when a primary key conflict occurs during data synchronization for the new unit node. Valid values:
-   * * **overwrite**: overwrites the conflicting primary key on the destination node.
-   * * **interrupt**: stops the synchronization task and reports an error.
-   * * **ignore**: ignores the conflicting primary key on the current node.
+   * The resolution policy for primary key conflicts that occur during synchronization on the new unit node. Valid values:
+   * * **overwrite**: overwrites the conflicting primary keys in the destination node.
+   * * **interrupt**: interrupts the synchronization task, reports an error, and exits.
+   * * **ignore**: ignores the conflicting primary keys in the current node.
    * 
    * This parameter is required.
    * 
@@ -102,13 +102,13 @@ export class CreateGADInstanceRequestUnitNode extends $dara.Model {
   dtsConflict?: string;
   /**
    * @remarks
-   * The specification of the data synchronization link for the new unit node. Valid values:
+   * The data synchronization link specification for the new unit node. Valid values:
    * * **small**
    * * **medium**
    * * **large**
    * * **micro**
    * 
-   * >For more information about the differences between specifications, see [Data synchronization link specifications](https://help.aliyun.com/document_detail/26605.html).
+   * > For more information about the differences between specifications, see [Data synchronization link specifications](https://help.aliyun.com/document_detail/26605.html).
    * 
    * This parameter is required.
    * 
@@ -142,7 +142,7 @@ export class CreateGADInstanceRequestUnitNode extends $dara.Model {
    * * **Postpaid**: pay-as-you-go.
    * * **Prepaid**: subscription.
    * 
-   * >The system automatically generates and completes the payment for the order. You do not need to manually confirm the payment.
+   * > The system automatically generates an order and completes the payment. Manual payment confirmation is not required.
    * 
    * @example
    * Postpaid
@@ -160,9 +160,9 @@ export class CreateGADInstanceRequestUnitNode extends $dara.Model {
   regionID?: string;
   /**
    * @remarks
-   * The [IP address whitelist](https://help.aliyun.com/document_detail/43185.html) of the new unit node. Separate multiple entries with commas (,). Entries cannot be duplicated. A maximum of 1,000 entries are allowed. The following two formats are supported:
+   * The [IP whitelist](https://help.aliyun.com/document_detail/43185.html) of the new unit node. Separate multiple entries with commas (,). Duplicate entries are not allowed. A maximum of 1,000 entries are supported. The following two formats are supported:
    * * IP address format, such as `10.10.10.10`.
-   * * CIDR format, such as `10.10.10.10/24` (Classless Inter-Domain Routing, where **24** indicates the length of the prefix, ranging from **1 to 32**).
+   * * CIDR block format, such as `10.10.10.10/24` (Classless Inter-Domain Routing, where **24** indicates the length of the prefix in the address, ranging from **1** to **32**).
    * 
    * @example
    * 10.10.10.10
@@ -178,7 +178,7 @@ export class CreateGADInstanceRequestUnitNode extends $dara.Model {
   vSwitchID?: string;
   /**
    * @remarks
-   * The virtual private cloud (VPC) ID of the new unit node.
+   * The VPC ID of the new unit node.
    * 
    * @example
    * vpc-bp19ame5m1r3o****
@@ -194,9 +194,9 @@ export class CreateGADInstanceRequestUnitNode extends $dara.Model {
   zoneID?: string;
   /**
    * @remarks
-   * The zone ID of the secondary node for the new unit node. You can call the DescribeRegions operation to query the zone ID.
-   * * If this value is the same as the **ZoneId** of the current unit node, the single-zone deployment is used.
-   * * If this value is different from the **ZoneId** of the current unit node, the multi-zone deployment is used.
+   * The active zone ID of the secondary node for the new unit node. You can call the DescribeRegions operation to query the active zone ID.
+   * * If this value is the same as the **ZoneId** of the current unit node, it is a single-zone deployment.
+   * * If this value is different from the **ZoneId** of the current unit node, it is a multi-zone deployment.
    * 
    * @example
    * cn-hangzhou-j
@@ -204,9 +204,9 @@ export class CreateGADInstanceRequestUnitNode extends $dara.Model {
   zoneIDSlave1?: string;
   /**
    * @remarks
-   * The zone ID of the logger node for the new unit node. You can call the DescribeRegions operation to query the zone ID.
-   * * If this value is the same as the **ZoneId** of the current unit node, the single-zone deployment is used.
-   * * If this value is different from the **ZoneId** of the current unit node, the multi-zone deployment is used.
+   * The active zone ID of the logger node for the new unit node. You can call the DescribeRegions operation to query the active zone ID.
+   * * If this value is the same as the **ZoneId** of the current unit node, it is a single-zone deployment.
+   * * If this value is different from the **ZoneId** of the current unit node, it is a multi-zone deployment.
    * 
    * @example
    * cn-hangzhou-j
@@ -266,10 +266,10 @@ export class CreateGADInstanceRequestUnitNode extends $dara.Model {
 export class CreateGADInstanceRequest extends $dara.Model {
   /**
    * @remarks
-   * The ID of the primary instance. You can call the DescribeDBInstances operation to query the instance ID. This instance serves as the central node (primary node) of the GAD cluster.
+   * The ID of the primary instance. You can call the DescribeDBInstances operation to query the ID. This instance serves as the central node (primary node) of the ApsaraDB RDS global active database cluster.
    * 
-   * > * A primary instance ID can serve as the central node of only one GAD cluster.
-   * > * Only ApsaraDB RDS for MySQL primary instances in the China (Hangzhou), China (Shanghai), China (Qingdao), China (Beijing), China (Zhangjiakou), China (Shenzhen), and China (Chengdu) regions can serve as the central node of a GAD cluster.
+   * > * A primary instance ID can serve as the central node of only one ApsaraDB RDS global active database cluster.
+   * > * Only primary ApsaraDB RDS for MySQL instances in the China (Hangzhou), China (Shanghai), China (Qingdao), China (Beijing), China (Zhangjiakou), China (Shenzhen), and China (Chengdu) regions can serve as the central node of an ApsaraDB RDS global active database cluster.
    * 
    * This parameter is required.
    * 
@@ -309,10 +309,10 @@ export class CreateGADInstanceRequest extends $dara.Model {
   centralRegionId?: string;
   /**
    * @remarks
-   * A JSON array that contains the database information of the central node. All database information in this array is synchronized to the current unit node (secondary node). Parameter description:
-   * * **name**: the database name.
-   * * **all**: specifies whether to synchronize all data in the current database or table. Valid values: **true** | **false**.
-   * * **Table**: the table name. If the **all** parameter is set to **false**, you must also specify the names of the tables to be synchronized in the JSON array.
+   * The JSON array of database information in the central node. All database information in the array is used for synchronization to the current unit node (secondary node). Parameter description:
+   * * **name**: the name of the database.
+   * * **all**: specifies whether to synchronize all data in the current database or table. Valid values: **true** and **false**.
+   * * **Table**: the name of the table. If the **all** parameter is set to **false**, you must also include the names of the tables to be synchronized in the JSON array.
    * 
    * Example: `{
    *    "testdb": {
@@ -339,7 +339,7 @@ export class CreateGADInstanceRequest extends $dara.Model {
   DBList?: string;
   /**
    * @remarks
-   * The name of the GAD cluster.
+   * The name of the ApsaraDB RDS global active database cluster.
    * 
    * @example
    * test
@@ -355,12 +355,12 @@ export class CreateGADInstanceRequest extends $dara.Model {
   resourceGroupId?: string;
   /**
    * @remarks
-   * The tags.
+   * The list of tags.
    */
   tag?: CreateGADInstanceRequestTag[];
   /**
    * @remarks
-   * The unit node information.
+   * The information about the unit node.
    * 
    * This parameter is required.
    */

package/src/models/CreateGadinstanceResponseBody.ts

@@ -13,7 +13,7 @@ export class CreateGADInstanceResponseBodyResult extends $dara.Model {
   createMemberCount?: string;
   /**
    * @remarks
-   * The GAD cluster ID.
+   * The ID of the global active database cluster.
    * 
    * @example
    * gad-rm-bp1npi2j8****

package/src/models/CreateImportTaskRequest.ts

@@ -15,7 +15,7 @@ export class CreateImportTaskRequest extends $dara.Model {
   dbInstanceId?: string;
   /**
    * @remarks
-   * The estimated data space. Unit: GB.
+   * The estimated data size. Unit: GB.
    * 
    * @example
    * 1000
@@ -23,7 +23,7 @@ export class CreateImportTaskRequest extends $dara.Model {
   estimatedSize?: number;
   /**
    * @remarks
-   * The host IP address of the source MySQL instance. ApsaraDB RDS accesses this IP address to obtain the backup.
+   * The IP address of the source MySQL host. ApsaraDB RDS accesses this IP address to retrieve backups.
    * 
    * This parameter is required.
    * 
@@ -44,7 +44,7 @@ export class CreateImportTaskRequest extends $dara.Model {
   password?: string;
   /**
    * @remarks
-   * The port of the source MySQL instance.
+   * The port of the source MySQL database.
    * 
    * This parameter is required.
    * 
@@ -54,7 +54,7 @@ export class CreateImportTaskRequest extends $dara.Model {
   port?: number;
   /**
    * @remarks
-   * The region ID. You can call [DescribeRegions](https://help.aliyun.com/document_detail/610399.html) to query available regions.
+   * The region ID. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/610399.html) operation to query the region ID.
    * 
    * This parameter is required.
    * 
@@ -80,7 +80,7 @@ export class CreateImportTaskRequest extends $dara.Model {
   sourcePlatform?: string;
   /**
    * @remarks
-   * The streaming port used to transfer the backup.
+   * The streaming port used to transfer backups.
    * 
    * This parameter is required.
    * 
@@ -90,7 +90,7 @@ export class CreateImportTaskRequest extends $dara.Model {
   streamPort?: number;
   /**
    * @remarks
-   * The account of the source MySQL instance. The account must have permissions to create backups and set up replication. Refer to the following SQL statements for granting permissions:
+   * The source MySQL account. The account must have the permissions to create backups and configure replication. Refer to the following SQL statements for granting permissions:
    * ```
    * -- MySQL 5.7
    * mysql> CREATE USER \\"myadmin\\"@\\"%\\" IDENTIFIED BY \\"s3cret\\";
@@ -104,6 +104,7 @@ export class CreateImportTaskRequest extends $dara.Model {
    * mysql> GRANT SELECT ON performance_schema.keyring_component_status TO myadmin@\\"%\\";
    * mysql> GRANT SELECT ON performance_schema.replication_group_members TO myadmin@\\"%\\";
    * mysql> FLUSH PRIVILEGES;
+   * ```
    * 
    * This parameter is required.
    * 
@@ -113,7 +114,7 @@ export class CreateImportTaskRequest extends $dara.Model {
   user?: string;
   /**
    * @remarks
-   * The installation path of xtrabackup on the source instance.
+   * The installation path of XtraBackup on the source instance.
    * 
    * @example
    * /usr/bin/xtrabackup

package/src/models/CreateMaskingRulesRequest.ts

@@ -65,7 +65,7 @@ export class CreateMaskingRulesRequest extends $dara.Model {
   DBInstanceName?: string;
   /**
    * @remarks
-   * The database name.
+   * The name of the database.
    * 
    * @example
    * testdb
@@ -81,7 +81,7 @@ export class CreateMaskingRulesRequest extends $dara.Model {
   defaultAlgo?: string;
   /**
    * @remarks
-   * The rule algorithms. You can specify multiple algorithms. Masking algorithms can include additional parameters. Format: {name: algorithm1}, {name: algorithm2, params: {encryption position, encryption length}}.
+   * The rule algorithm. You can specify multiple algorithms. Additional parameters can be added for masking algorithms. Format: {name: Algorithm 1}, {name: Algorithm 2, params: {encryption position, number of encrypted digits}}.
    * 
    * @example
    * [{"name": "aes-128-gcm"},
@@ -101,12 +101,12 @@ export class CreateMaskingRulesRequest extends $dara.Model {
   resourceOwnerId?: number;
   /**
    * @remarks
-   * The rule configuration in JSON string format, which contains matching rules for databases, tables, and columns.
+   * The rule configuration. The value is a JSON string that contains the matching rules for databases, tables, and columns.
    */
   ruleConfig?: CreateMaskingRulesRequestRuleConfig;
   /**
    * @remarks
-   * The rule name. Only one rule name can be specified at a time.
+   * The name of the rule. Only one rule name can be specified at a time.
    * 
    * This parameter is required.
    * 

package/src/models/CreateMaskingRulesResponseBody.ts

@@ -26,10 +26,10 @@ export class CreateMaskingRulesResponseBody extends $dara.Model {
   requestId?: string;
   /**
    * @remarks
-   * Indicates whether the request was successful. Valid values:
+   * Indicates whether the request is successful. Valid values:
    * 
-   * - **true**: The request was successful.
-   * - **false**: The request failed.
+   * - **true**: Successful.
+   * - **false**: Failed.
    * 
    * @example
    * true

package/src/models/CreateMaskingRulesShrinkRequest.ts

@@ -15,7 +15,7 @@ export class CreateMaskingRulesShrinkRequest extends $dara.Model {
   DBInstanceName?: string;
   /**
    * @remarks
-   * The database name.
+   * The name of the database.
    * 
    * @example
    * testdb
@@ -31,7 +31,7 @@ export class CreateMaskingRulesShrinkRequest extends $dara.Model {
   defaultAlgo?: string;
   /**
    * @remarks
-   * The rule algorithms. You can specify multiple algorithms. Masking algorithms can include additional parameters. Format: {name: algorithm1}, {name: algorithm2, params: {encryption position, encryption length}}.
+   * The rule algorithm. You can specify multiple algorithms. Additional parameters can be added for masking algorithms. Format: {name: Algorithm 1}, {name: Algorithm 2, params: {encryption position, number of encrypted digits}}.
    * 
    * @example
    * [{"name": "aes-128-gcm"},
@@ -51,12 +51,12 @@ export class CreateMaskingRulesShrinkRequest extends $dara.Model {
   resourceOwnerId?: number;
   /**
    * @remarks
-   * The rule configuration in JSON string format, which contains matching rules for databases, tables, and columns.
+   * The rule configuration. The value is a JSON string that contains the matching rules for databases, tables, and columns.
    */
   ruleConfigShrink?: string;
   /**
    * @remarks
-   * The rule name. Only one rule name can be specified at a time.
+   * The name of the rule. Only one rule name can be specified at a time.
    * 
    * This parameter is required.
    *