@alicloud/polardb20170801 8.4.3 → 9.0.1

package/src/models/ModifyActiveOperationTasksRequest.ts

@@ -5,16 +5,13 @@ import * as $dara from '@darabonba/typescript';
 export class ModifyActiveOperationTasksRequest extends $dara.Model {
   /**
    * @remarks
-   * Specifies whether to immediately start scheduling. Valid values:
+   * Specifies whether to immediately start execution scheduling.
    * 
-   * *   0: No. This is the default value.
-   * *   1: Yes.
+   * - 0: No (default).
+   * - 1: Yes.
    * 
-   * > 
-   * 
-   * *   If you set this parameter to 0, you must specify the SwitchTime parameter.
-   * 
-   * *   If you set this parameter to 1, the SwitchTime parameter does not take effect. In this case, the start time of the event is set to the current time, and the system determines the switching time based on the start time. Scheduling is started immediately, which is a prerequisite for the switchover. Then, the switchover is performed. You can call the DescribeActiveOperationTasks operation and check the return value of the PrepareInterval parameter for the preparation time.
+   * >- If the value is 0, the SwitchTime parameter is required.
+   * >- If the value is 1, the SwitchTime parameter does not take effect. The event start time is set to the current time, and the switchover time is automatically calculated based on the new start time. The event immediately enters execution scheduling (not an immediate switchover) and begins pre-switchover preparations. The switchover is performed after the preparations are complete. You can call the DescribeActiveOperationTasks operation and obtain the preparation time from the PrepareInterval response parameter.
    * 
    * @example
    * 0
@@ -25,8 +22,7 @@ export class ModifyActiveOperationTasksRequest extends $dara.Model {
   /**
    * @remarks
    * The region ID.
-   * 
-   * >  You can call the [DescribeRegions](https://help.aliyun.com/document_detail/98041.html) operation to query the region information about all clusters within a specified account.
+   * > You can call the [DescribeRegions](https://help.aliyun.com/document_detail/98041.html) operation to query the region information of all clusters under the target account.
    * 
    * This parameter is required.
    * 
@@ -39,13 +35,11 @@ export class ModifyActiveOperationTasksRequest extends $dara.Model {
   securityToken?: string;
   /**
    * @remarks
-   * The scheduled switching time that you want to specify. Specify the time in the ISO 8601 standard in the yyyy-MM-ddTHH:mm:ssZ format. The time must be in UTC.
+   * The planned switchover time to set. Specify the time in the yyyy-MM-ddTHH:mm:ssZ format (UTC).
    * 
    * > 
-   * 
-   * *   The time that is specified by this parameter cannot be later than the latest execution time.
-   * 
-   * *   You can call the DescribeActiveOperationTasks operation and check the return value of the Deadline parameter for the latest execution time.
+   * > - The time cannot be later than the deadline.
+   * > - You can call the DescribeActiveOperationTasks operation and obtain the deadline from the Deadline response parameter.
    * 
    * @example
    * 2023-04-25T06:00:00Z
@@ -53,7 +47,7 @@ export class ModifyActiveOperationTasksRequest extends $dara.Model {
   switchTime?: string;
   /**
    * @remarks
-   * The task IDs.
+   * The list of task IDs.
    * 
    * This parameter is required.
    * 

package/src/models/ModifyActiveOperationTasksResponseBody.ts

@@ -13,7 +13,7 @@ export class ModifyActiveOperationTasksResponseBody extends $dara.Model {
   requestId?: string;
   /**
    * @remarks
-   * The task IDs.
+   * The list of task IDs.
    * 
    * @example
    * 11111,22222

package/src/models/ModifyApplicationEndpointAddressRequest.ts

@@ -88,7 +88,7 @@ export class ModifyApplicationEndpointAddressRequest extends $dara.Model {
   netType?: string;
   /**
    * @remarks
-   * The new endpoint prefix.
+   * The new endpoint address prefix.
    * 
    * @example
    * xg06iror0l

package/src/models/ModifyApplicationEndpointAddressShrinkRequest.ts

@@ -38,7 +38,7 @@ export class ModifyApplicationEndpointAddressShrinkRequest extends $dara.Model {
   netType?: string;
   /**
    * @remarks
-   * The new endpoint prefix.
+   * The new endpoint address prefix.
    * 
    * @example
    * xg06iror0l

package/src/models/ModifyCostRuleRequest.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class ModifyCostRuleRequest extends $dara.Model {
   /**
    * @remarks
-   * The cost in points per million cache tokens. Default value: 0.
+   * The cache cost points per million tokens. Default value: 0.
    * 
    * @example
    * 0
@@ -13,7 +13,15 @@ export class ModifyCostRuleRequest extends $dara.Model {
   cacheCostPointsPerMillion?: string;
   /**
    * @remarks
-   * The cost rule ID.
+   * The cache creation cost points per million tokens.
+   * 
+   * @example
+   * 400
+   */
+  cacheCreationCostPointsPerMillion?: string;
+  /**
+   * @remarks
+   * The ID of the cost rule.
    * 
    * This parameter is required.
    * 
@@ -21,6 +29,14 @@ export class ModifyCostRuleRequest extends $dara.Model {
    * 924d450014e64e88ac6e8486f8e990**
    */
   costRuleId?: string;
+  /**
+   * @remarks
+   * The explicit cache read cost points per million tokens.
+   * 
+   * @example
+   * 100
+   */
+  explicitCacheCostPointsPerMillion?: string;
   /**
    * @remarks
    * The gateway instance ID.
@@ -33,7 +49,15 @@ export class ModifyCostRuleRequest extends $dara.Model {
   gwClusterId?: string;
   /**
    * @remarks
-   * The cost in points per million input tokens. Default value: 0.
+   * The image input cost points per image.
+   * 
+   * @example
+   * 5
+   */
+  imageCostPointsPerCount?: string;
+  /**
+   * @remarks
+   * The input cost points per million tokens. Default value: 0.
    * 
    * @example
    * 0
@@ -41,7 +65,15 @@ export class ModifyCostRuleRequest extends $dara.Model {
   inputCostPointsPerMillion?: string;
   /**
    * @remarks
-   * The model name, such as gpt-4 or qwen-turbo.
+   * The input token tiered price (non-cumulative) specified as a JSON array character string. Each element contains Tier and InputCostPointsPerMillion. Valid values for Tier: "" (default tier), 0-32K, 32K-64K, 64K-128K, 128K-256K, 256K-512K, 512K-1M, and 1M+. Example: [{"Tier":"0-32K","InputCostPointsPerMillion":"1200"}]. A non-empty value replaces all existing tiers. If this parameter is not specified or is set to an empty string, the original tiers are retained. An empty array [] is not allowed.
+   * 
+   * @example
+   * [{"Tier":"0-32K","InputCostPointsPerMillion":"1200"}]
+   */
+  inputTokenTiers?: string;
+  /**
+   * @remarks
+   * The name of the model, such as gpt-4 or qwen-turbo.
    * 
    * This parameter is required.
    * 
@@ -51,7 +83,7 @@ export class ModifyCostRuleRequest extends $dara.Model {
   modelName?: string;
   /**
    * @remarks
-   * The model service ID.
+   * The ID of the model service.
    * 
    * This parameter is required.
    * 
@@ -61,7 +93,7 @@ export class ModifyCostRuleRequest extends $dara.Model {
   modelServiceId?: string;
   /**
    * @remarks
-   * The cost in points per million output tokens. Default value: 0.
+   * The output cost points per million tokens. Default value: 0.
    * 
    * @example
    * 10
@@ -75,29 +107,47 @@ export class ModifyCostRuleRequest extends $dara.Model {
    * cn-beijing
    */
   regionId?: string;
+  /**
+   * @remarks
+   * The video input cost points per second.
+   * 
+   * @example
+   * 20
+   */
+  videoCostPointsPerSecond?: string;
   static names(): { [key: string]: string } {
     return {
       cacheCostPointsPerMillion: 'CacheCostPointsPerMillion',
+      cacheCreationCostPointsPerMillion: 'CacheCreationCostPointsPerMillion',
       costRuleId: 'CostRuleId',
+      explicitCacheCostPointsPerMillion: 'ExplicitCacheCostPointsPerMillion',
       gwClusterId: 'GwClusterId',
+      imageCostPointsPerCount: 'ImageCostPointsPerCount',
       inputCostPointsPerMillion: 'InputCostPointsPerMillion',
+      inputTokenTiers: 'InputTokenTiers',
       modelName: 'ModelName',
       modelServiceId: 'ModelServiceId',
       outputCostPointsPerMillion: 'OutputCostPointsPerMillion',
       regionId: 'RegionId',
+      videoCostPointsPerSecond: 'VideoCostPointsPerSecond',
     };
   }
 
   static types(): { [key: string]: any } {
     return {
       cacheCostPointsPerMillion: 'string',
+      cacheCreationCostPointsPerMillion: 'string',
       costRuleId: 'string',
+      explicitCacheCostPointsPerMillion: 'string',
       gwClusterId: 'string',
+      imageCostPointsPerCount: 'string',
       inputCostPointsPerMillion: 'string',
+      inputTokenTiers: 'string',
       modelName: 'string',
       modelServiceId: 'string',
       outputCostPointsPerMillion: 'string',
       regionId: 'string',
+      videoCostPointsPerSecond: 'string',
     };
   }
 

package/src/models/ModifyCostRuleResponseBody.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class ModifyCostRuleResponseBody extends $dara.Model {
   /**
    * @remarks
-   * The cost rule ID.
+   * The ID of the cost rule.
    * 
    * @example
    * 924d450014e64e88ac6e8486f8e990**
@@ -13,7 +13,7 @@ export class ModifyCostRuleResponseBody extends $dara.Model {
   costRuleId?: string;
   /**
    * @remarks
-   * The request ID.
+   * Id of the request
    * 
    * @example
    * 6BD9CDE4-5E7B-4BF3-9BB8-83C73E******

package/src/models/ModifyCronJobPolicyServerlessRequest.ts

@@ -7,9 +7,9 @@ export class ModifyCronJobPolicyServerlessRequest extends $dara.Model {
    * @remarks
    * Specifies whether to enable No-activity Suspension. Valid values:
    * 
-   * - **true**: Enables the feature.
+   * - **true**: Enabled.
    * 
-   * - **false** (default): Disables the feature.
+   * - **false** (default): Disabled.
    * 
    * @example
    * true
@@ -17,7 +17,7 @@ export class ModifyCronJobPolicyServerlessRequest extends $dara.Model {
   allowShutDown?: string;
   /**
    * @remarks
-   * The Cron expression.
+   * The cron expression.
    * 
    * This parameter is required.
    * 
@@ -39,6 +39,8 @@ export class ModifyCronJobPolicyServerlessRequest extends $dara.Model {
    * @remarks
    * The end time.
    * 
+   * Specify the time in the ISO 8601 standard in the YYYY-MM-DDTHH:mmZ format. The time must be in UTC.
+   * 
    * This parameter is required.
    * 
    * @example
@@ -47,7 +49,7 @@ export class ModifyCronJobPolicyServerlessRequest extends $dara.Model {
   endTime?: string;
   /**
    * @remarks
-   * The ID of the scheduled task.
+   * The scheduled task ID.
    * 
    * @example
    * 8006e51c-dab3-4602-bc69-4f728002c6ce
@@ -85,7 +87,7 @@ export class ModifyCronJobPolicyServerlessRequest extends $dara.Model {
   scaleApRoNumMin?: string;
   /**
    * @remarks
-   * The maximum number of PCUs. Valid values: 1 to 32.
+   * The maximum value. Valid values: 1 to 32. Unit: PCU.
    * 
    * @example
    * 12
@@ -93,7 +95,7 @@ export class ModifyCronJobPolicyServerlessRequest extends $dara.Model {
   scaleMax?: string;
   /**
    * @remarks
-   * The minimum number of PolarDB Capacity Units (PCUs). Valid values: 0.25 to 32. This value must be less than or equal to the value of ScaleMax.
+   * The minimum value. Valid values: 0.25 to 32. The minimum value must be less than or equal to the maximum value. Unit: PCU.
    * 
    * @example
    * 1
@@ -101,7 +103,7 @@ export class ModifyCronJobPolicyServerlessRequest extends $dara.Model {
   scaleMin?: string;
   /**
    * @remarks
-   * The maximum number of read-only nodes for scaling. Valid values: 0 to 15.
+   * The maximum number of read-only nodes for scaling. The value cannot be less than the minimum value. Valid values: 0 to 15.
    * 
    * @example
    * 4
@@ -117,7 +119,7 @@ export class ModifyCronJobPolicyServerlessRequest extends $dara.Model {
   scaleRoNumMin?: string;
   /**
    * @remarks
-   * The detection period for No-activity Suspension. Unit: minutes. Valid values: 5 to 1440. The value must be a multiple of 5.
+   * The detection duration for No-activity Suspension. Valid values: 5 to 1440. Unit: minutes. The detection duration must be a multiple of 5 minutes.
    * 
    * @example
    * 10
@@ -125,7 +127,7 @@ export class ModifyCronJobPolicyServerlessRequest extends $dara.Model {
   secondsUntilAutoPause?: string;
   /**
    * @remarks
-   * The CPU utilization threshold for a scale-up. Unit: percent. Valid values: 40 to 100.
+   * The CPU scale-up threshold. Valid values: 40 to 100. Unit: %.
    * 
    * @example
    * 80
@@ -133,7 +135,7 @@ export class ModifyCronJobPolicyServerlessRequest extends $dara.Model {
   serverlessRuleCpuEnlargeThreshold?: string;
   /**
    * @remarks
-   * The CPU utilization threshold for a scale-down. Unit: percent. Valid values: 10 to 100. The value of ServerlessRuleCpuEnlargeThreshold minus the value of this parameter must be greater than or equal to 30.
+   * The CPU scale-down threshold. Valid values: 10 to 100. Unit: %. The difference between the scale-up threshold and the scale-down threshold must be at least 30.
    * 
    * @example
    * 25
@@ -143,9 +145,8 @@ export class ModifyCronJobPolicyServerlessRequest extends $dara.Model {
    * @remarks
    * The scaling sensitivity. Valid values:
    * 
-   * - normal
-   * 
-   * - flexible
+   * - normal: standard.
+   * - flexible: sensitive.
    * 
    * @example
    * normal
@@ -153,7 +154,7 @@ export class ModifyCronJobPolicyServerlessRequest extends $dara.Model {
   serverlessRuleMode?: string;
   /**
    * @remarks
-   * The start time. Specify the time in the `yyyy-MM-ddTHH:mm:ssZ` format. The time must be in UTC.
+   * The start time. Specify the time in the `yyyy-MM-ddTHH:mm:ssZ` format (UTC).
    * 
    * @example
    * 2020-09-23T01:00:00Z

package/src/models/ModifyCronJobPolicyServerlessResponseBody.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class ModifyCronJobPolicyServerlessResponseBody extends $dara.Model {
   /**
    * @remarks
-   * The request ID.
+   * Id of the request
    * 
    * @example
    * D1401250-910B-57A6-8A6A-D9988A62B1CD

package/src/models/ModifyDbclusterDescriptionZonalRequest.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class ModifyDBClusterDescriptionZonalRequest extends $dara.Model {
   /**
    * @remarks
-   * A client token to ensure the idempotence of the request. The client generates this value. It must be unique among different requests. The token is case-sensitive and can contain up to 64 ASCII characters.
+   * The client token that is used to ensure the idempotence of the request and prevent duplicate submissions. The value is generated by the client and must be unique across different requests. It is case-sensitive and can contain up to 64 ASCII characters.
    * 
    * @example
    * 6000170000591aed949d0f54a343f1a4233c1e7d1c5c******
@@ -16,7 +16,6 @@ export class ModifyDBClusterDescriptionZonalRequest extends $dara.Model {
    * The cluster name. The cluster name must meet the following requirements:
    * 
    * - It cannot start with `http://` or `https://`.
-   * 
    * - It must be 2 to 256 characters in length.
    * 
    * This parameter is required.
@@ -29,6 +28,8 @@ export class ModifyDBClusterDescriptionZonalRequest extends $dara.Model {
    * @remarks
    * The cluster ID.
    * 
+   * > Note: This API operation applies only to edge clusters. Edge clusters must be created by calling CreateDBCluster(CloudProvider=ENS, EnsRegionId=xxx) and can be queried by calling DescribeDBClustersZonal. For standard clusters, use ModifyDBClusterDescription.
+   * 
    * This parameter is required.
    * 
    * @example

package/src/models/ModifyDbclusterEndpointRequest.ts

@@ -46,22 +46,23 @@ export class ModifyDBClusterEndpointRequest extends $dara.Model {
    * @remarks
    * The advanced configuration of the cluster endpoint in JSON format. You can configure the consistency level, transaction splitting, whether the primary node accepts read requests, connection pooling, and other settings.
    * 
-   * * To configure the load balancing policy, use the format `{\\"LoadBalancePolicy\\":\\"Load balancing policy\\"}`. Valid values:   
-   *     * **0**: connection-based load balancing (default)
-   *     * **1**: active-request-based load balancing
+   * * To configure the load balancing policy, use the format `{\\"LoadBalancePolicy\\":\\"Load balancing policy\\"}`. Valid values:
+   *     * **0**: connection-based load balancing. (Default)
+   *     * **1**: active-request-based load balancing.
    * 
    * * To configure whether the primary node accepts read requests, use the format `{\\"MasterAcceptReads\\":\\"Whether the primary node accepts reads\\"}`. Valid values:
    *     * **on**: The primary node accepts read requests. (Default)
    *     * **off**: The primary node does not accept read requests.
    * 
-   * * To configure transaction splitting, use the format `{\\"DistributedTransaction\\":\\"Transaction splitting\\"}`. Valid values:
-   *     * **on**: Transaction splitting is enabled. (Default)
-   *     * **off**: Transaction splitting is disabled.
+   * * To configure transaction splitting, use two parameters together in the format `{\\"DistributedTransaction\\":\\"Transaction splitting\\",\\"TrxSplitAggressive\\":\\"Transaction splitting\\"}`. Valid values:
+   *     * **Disabled**: DistributedTransaction=off, TrxSplitAggressive=off
+   *     * **Read request splitting before first write request**: DistributedTransaction=on, TrxSplitAggressive=off
+   *     * **Full transaction splitting**: DistributedTransaction=on, TrxSplitAggressive=on
    * 
    * * To configure the consistency level, use the format `{\\"ConsistLevel\\":\\"Consistency level\\"}`. Valid values:
-   *     * **0**: eventual consistency (weak)
-   *     * **1**: session consistency (medium) (default)
-   *     * **2**: global consistency (strong)
+   *     * **0**: eventual consistency (weak).
+   *     * **1**: session consistency (medium). (Default)
+   *     * **2**: global consistency (strong).
    * 
    * * To configure the global consistency read timeout period, use the format `{\\"ConsistTimeout\\":\\"Global consistency read timeout\\"}`. Valid values: 0 to 60000. Default value: 20. Unit: ms.
    * 
@@ -69,31 +70,34 @@ export class ModifyDBClusterEndpointRequest extends $dara.Model {
    * 
    * * To configure the global (or session) consistency read timeout policy, use the format `{\\"ConsistTimeoutAction\\":\\"Global consistency read timeout policy\\"}`. Valid values:
    *     * **0**: Forward the read request to the primary node. (Default)
-   *     * **1**: The proxy returns the error message `wait replication complete timeout, please retry` to the application.
+   *     * **1**: The proxy returns an error message `wait replication complete timeout, please retry` to the application.
    * 
-   * * To configure connection pooling, use the format `{\\"ConnectionPersist\\":\\"Connection pool\\"}`. Valid values:
-   *     * **off**: Connection pooling is disabled. (Default)
-   *     * **Session**: Session-level connection pooling is enabled.
-   *     * **Transaction**: Transaction-level connection pooling is enabled.
+   * * To configure the connection pool, use the format `{\\"ConnectionPersist\\":\\"Connection pool\\"}`. Valid values:
+   *     * **off**: Disable the connection pool. (Default)
+   *     * **Session**: Enable the session-level connection pool.
+   *     * **Transaction**: Enable the transaction-level connection pooling.
+   * 
+   * * To configure on-demand connection establishment, use the format `{\\"ConnectAllBackends\\":\\"On-demand connection\\"}`. Valid values:
+   *     * **on**: Enabled.
+   *     * **off**: Disabled. (Default)
    * 
    * * To configure parallel query, use the format `{\\"MaxParallelDegree\\":\\"Parallel query\\"}`. Valid values:
-   *     * **on**: Parallel query is enabled.
-   *     * **off**: Parallel query is disabled. (Default)
+   *     * **on**: Enable parallel query.
+   *     * **off**: Disable parallel query. (Default)
    * 
    * * To configure automatic request distribution among row offload reads from primary nodes, use the format `{\\"EnableHtapImci\\":\\"Row store/column store automatic request distribution\\"}`. Valid values:
-   *     * **on**: Automatic request distribution among row offload reads from primary nodes is enabled.
-   *     * **off**: Automatic request distribution among row offload reads from primary nodes is disabled. (Default)
-   * 
+   *     * **on**: Enable automatic request distribution among row offload reads from primary nodes.
+   *     * **off**: Disable automatic request distribution among row offload reads from primary nodes. (Default)
    * 
-   * * To configure overload protection, use the format `{\\"EnableOverloadThrottle\\":\\"Whether to enable overload protection\\"}`. Valid values:
-   *     * **on**: Overload protection is enabled.
-   *     * **off**: Overload protection is disabled. (Default)
+   * * To configure whether to enable overload protection, use the format `{\\"EnableOverloadThrottle\\":\\"Whether to enable overload protection\\"}`. Valid values:
+   *     * **on**: Enable overload protection.
+   *     * **off**: Disable overload protection. (Default)
    * 
    * * To configure node weights, use the format `{\\"NodesWeight\\":{\\"Node ID\\":\\"Weight value\\"}}`.
    * 
-   * > * Transaction splitting, whether the primary node accepts read requests, connection pooling, and overload protection can be configured only when the read/write mode of the PolarDB for MySQL cluster endpoint is **ReadWrite (automatic read/write splitting)**.
-   * > * When the read/write mode of the PolarDB for MySQL cluster endpoint is **ReadOnly**, both **connection-based load balancing** and **active-request-based load balancing** are supported. When the read/write mode is **ReadWrite (automatic read/write splitting)**, only **active-request-based load balancing** is supported.
-   * > * Automatic request distribution among row offload reads from primary nodes can be configured when the read/write mode of the PolarDB for MySQL cluster endpoint is **ReadWrite (automatic read/write splitting)**, or when the read/write mode is **ReadOnly** and the load balancing policy is **active-request-based load balancing**.
+   * > * Transaction splitting, whether the primary node accepts read requests, connection pooling, and overload protection can be configured only when the read/write mode of the PolarDB for MySQL cluster endpoint is **read/write (automatic read/write splitting)**.
+   * > * When the read/write mode of the PolarDB for MySQL cluster endpoint is **read-only**, both **connection-based load balancing** and **active-request-based load balancing** policies are supported. The **read/write (automatic read/write splitting)** mode supports only the **active-request-based load balancing** policy.
+   * > * Automatic request distribution among row offload reads from primary nodes can be configured when the read/write mode of the PolarDB for MySQL cluster endpoint is **read/write (automatic read/write splitting)**, or when the read/write mode is **read-only** and the load balancing policy is **active-request-based load balancing**.
    * > * Only PolarDB for MySQL supports setting the consistency level to global consistency.
    * > * If **ReadWriteMode** is set to **ReadOnly**, the consistency level can only be set to **0**.
    * > * You can configure the consistency level, transaction splitting, whether the primary node accepts read requests, and connection pooling at the same time. Example: `{\\"ConsistLevel\\":\\"1\\",\\"DistributedTransaction\\":\\"on\\",\\"ConnectionPersist\\":\\"Session\\",\\"MasterAcceptReads\\":\\"on\\"}`.
@@ -105,14 +109,14 @@ export class ModifyDBClusterEndpointRequest extends $dara.Model {
   endpointConfig?: string;
   /**
    * @remarks
-   * The read load nodes to add to the endpoint. Separate multiple nodes with commas (,). Default value: the existing nodes.
+   * The read load nodes to add to the target endpoint. Separate multiple nodes with commas (,). Default value: the existing nodes.
    * 
    * > * For PolarDB for MySQL, specify node IDs.
    * > * For PolarDB for PostgreSQL and PolarDB for PostgreSQL (Compatible with Oracle), specify node role names, such as `Writer,Reader1,Reader2`.
-   * > * If **ReadWriteMode** is set to **ReadOnly**, you can mount only one node. However, if this node fails, the endpoint may be unavailable for up to 1 hour. Do not use this configuration in production environments. Mount at least 2 nodes to improve availability.
+   * > * If **ReadWriteMode** is set to **ReadOnly**, you can mount only one node. However, if this node fails, the endpoint may be unavailable for up to 1 hour. Do not use this configuration in production environments. Select at least 2 nodes to improve availability.
    * > * If **ReadWriteMode** is set to **ReadWrite**, select at least 2 nodes.
-   *     * For PolarDB for MySQL, you can select any two nodes. If both nodes are read-only nodes, write requests are forwarded to the primary node.
-   *     * For PolarDB for PostgreSQL and PolarDB for PostgreSQL (Compatible with Oracle), the primary node must be included.
+   * >     * PolarDB for MySQL allows you to select any two nodes. If both nodes are read-only nodes, write requests are forwarded to the primary node.
+   * >     * PolarDB for PostgreSQL and PolarDB for PostgreSQL (Compatible with Oracle) require the primary node to be included.
    * 
    * @example
    * pi-**************,pi-*************
@@ -126,7 +130,7 @@ export class ModifyDBClusterEndpointRequest extends $dara.Model {
    * 
    * - **0**: Sends the request to the primary node.
    * 
-   * - **2**: Timeout degradation. When the global consistency read times out, the query is automatically degraded to regular requests, and the client does not receive an error message.
+   * - **2**: Timeout degradation. When the global consistency read times out, the query automatically degrades to regular requests, and the client does not receive an error message.
    * 
    * @example
    * 0
@@ -155,7 +159,7 @@ export class ModifyDBClusterEndpointRequest extends $dara.Model {
   resourceOwnerId?: number;
   /**
    * @remarks
-   * Specifies whether to enable the global consistency (high-performance mode) feature for the node. Valid values:
+   * Specifies whether to enable the global consistency (performance schema) feature for the node. Valid values:
    * 
    * - **ON**: Enabled.
    * 

package/src/models/ModifyDbclusterRequest.ts

@@ -11,11 +11,15 @@ export class ModifyDBClusterRequest extends $dara.Model {
    * ON
    */
   compressStorage?: string;
+  /**
+   * @remarks
+   * The connection resource quota of the AgenticDB cluster.
+   */
   connectionResourceQuota?: number;
   /**
    * @remarks
    * The cluster ID.
-   * > You can call the [DescribeDBClusters](https://help.aliyun.com/document_detail/173433.html) operation to query information about all clusters in the specified region, including cluster IDs.
+   * > You can call the DescribeDBClusters operation to query all clusters in the specified region, including cluster IDs.
    * 
    * This parameter is required.
    * 
@@ -25,8 +29,8 @@ export class ModifyDBClusterRequest extends $dara.Model {
   DBClusterId?: string;
   /**
    * @remarks
-   * The list of node instance names for the disaster recovery drill.
-   * > Node-level drills support only a single node. For zone-level drills, you can leave this parameter empty or specify all nodes.
+   * The list of drill node instance names.
+   * > Node dimension drills support only a single node. For zone dimension drills, you can omit this parameter or pass all nodes.
    * 
    * @example
    * pi-rwxxx
@@ -36,8 +40,8 @@ export class ModifyDBClusterRequest extends $dara.Model {
    * @remarks
    * The cross-zone data replication mode of the cluster. Valid values:
    * 
-   * - **AsyncSync**: asynchronous
-   * - **SemiSync**: semi-synchronous
+   * - **AsyncSync**: Asynchronous.
+   * - **SemiSync**: Semi-synchronous.
    * 
    * @example
    * AsynSync
@@ -47,7 +51,7 @@ export class ModifyDBClusterRequest extends $dara.Model {
    * @remarks
    * The fault injection method. Valid values:
    * 
-   * - 0: instance fault injection based on `Crash SQL`
+   * - 0: Instance fault injection based on `Crash SQL`.
    * 
    * @example
    * 0
@@ -55,11 +59,11 @@ export class ModifyDBClusterRequest extends $dara.Model {
   faultInjectionType?: string;
   /**
    * @remarks
-   * The dimension of the disaster recovery drill for the cluster. Valid values:
-   * - `0` or `FaultInjection`: primary zone-level disaster recovery drill.
-   * - `1`: node-level disaster recovery drill.
-   * > - In the **primary zone-level disaster recovery drill** scenario, all compute nodes in the primary zone become unavailable. The failover in this scenario causes service interruptions.
-   * > - In the **node-level disaster recovery drill** scenario, only a single compute node is supported for the drill. Specify the desired compute node name by using `DBNodeCrashList`.
+   * The fault drill dimension for the cluster. Valid values:
+   * - `0` or `FaultInjection`: Primary zone dimension fault drill.
+   * - `1`: Node dimension fault drill.
+   * > - In the **primary zone dimension fault drill** scenario, all compute nodes in the primary zone become unavailable, and the disaster recovery switchover in this scenario is lossy.
+   * > - In the **node dimension fault drill** scenario, only a single compute node can be drilled. Pass the desired compute node name through `DBNodeCrashList`.
    * 
    * @example
    * 0
@@ -68,11 +72,11 @@ export class ModifyDBClusterRequest extends $dara.Model {
   /**
    * @remarks
    * The automatic IMCI-based query acceleration feature. Valid values:
-   * - `ON`: enabled.
-   * - `OFF`: disabled.
+   * - `ON`: Enabled.
+   * - `OFF`: Disabled.
    * 
    * > - Only PolarDB for MySQL clusters are supported.
-   * > - For cluster version requirements, see [Automatic acceleration (AutoIndex)](https://help.aliyun.com/document_detail/2854119.html).
+   * > - For cluster version limits, refer to [Automatic IMCI-based query acceleration (AutoIndex)](https://help.aliyun.com/document_detail/2854119.html).
    * 
    * @example
    * OFF
@@ -94,8 +98,8 @@ export class ModifyDBClusterRequest extends $dara.Model {
    * @remarks
    * The cross-zone automatic switchover mode of the cluster. Valid values:
    * 
-   * - **ON**: enables cross-zone automatic switchover.
-   * - **OFF**: disables cross-zone automatic switchover.
+   * - **ON**: Enables cross-zone automatic switchover.
+   * - **OFF**: Disables cross-zone automatic switchover.
    * 
    * @example
    * ON
@@ -103,10 +107,10 @@ export class ModifyDBClusterRequest extends $dara.Model {
   standbyHAMode?: string;
   /**
    * @remarks
-   * Specifies whether to enable automatic storage scaling for the Standard Edition cluster. Valid values:
+   * Specifies whether to enable automatic storage scaling for a Standard Edition cluster. Valid values:
    * 
-   * - Enable: enables automatic storage scaling.
-   * - Disable: disables automatic storage scaling.
+   * - Enable: Enables automatic storage scaling.
+   * - Disable: Disables automatic storage scaling.
    * 
    * @example
    * Enable
@@ -114,7 +118,7 @@ export class ModifyDBClusterRequest extends $dara.Model {
   storageAutoScale?: string;
   /**
    * @remarks
-   * The upper limit for automatic storage scaling of the Standard Edition cluster. Unit: GB.
+   * The upper limit for automatic storage scaling of a Standard Edition cluster. Unit: GB.
    * 
    * > The maximum value is 32000.
    * 
@@ -124,7 +128,7 @@ export class ModifyDBClusterRequest extends $dara.Model {
   storageUpperBound?: number;
   /**
    * @remarks
-   * The JSON string that contains the information about the databases and tables to be restored. The values of the database and table information are strings.
+   * The JSON string of the target database and table information to be restored. The values of the database and table information are all of the string type.
    * Example: `[
    *    {
    *        "tables":[
@@ -139,7 +143,7 @@ export class ModifyDBClusterRequest extends $dara.Model {
    *        "newname":"testdb_restore"
    *    }
    * ]`.
-   * > You can call the [DescribeMetaList](https://help.aliyun.com/document_detail/194770.html) operation to query the names of databases and tables that can be restored, and then specify the information in the corresponding fields in the preceding example.
+   * > You can call the [DescribeMetaList](https://help.aliyun.com/document_detail/194770.html) operation to view the details of the database and table names that support restoration, and fill the supported database and table information into the corresponding positions in the preceding example.
    * 
    * @example
    * [ { "tables":[ { "name":"testtb", "type":"table", "newname":"testtb_restore" } ], "name":"testdb", "type":"db", "newname":"testdb_restore" } ]