@alicloud/polardb20170801 8.4.2 → 9.0.0

package/src/models/ModifyDbclusterRequest.ts

@@ -11,11 +11,15 @@ export class ModifyDBClusterRequest extends $dara.Model {
    * ON
    */
   compressStorage?: string;
+  /**
+   * @remarks
+   * The connection resource quota of the AgenticDB cluster.
+   */
   connectionResourceQuota?: number;
   /**
    * @remarks
    * The cluster ID.
-   * > You can call the [DescribeDBClusters](https://help.aliyun.com/document_detail/173433.html) operation to query information about all clusters in the specified region, including cluster IDs.
+   * > You can call the DescribeDBClusters operation to query all clusters in the specified region, including cluster IDs.
    * 
    * This parameter is required.
    * 
@@ -25,8 +29,8 @@ export class ModifyDBClusterRequest extends $dara.Model {
   DBClusterId?: string;
   /**
    * @remarks
-   * The list of node instance names for the disaster recovery drill.
-   * > Node-level drills support only a single node. For zone-level drills, you can leave this parameter empty or specify all nodes.
+   * The list of drill node instance names.
+   * > Node dimension drills support only a single node. For zone dimension drills, you can omit this parameter or pass all nodes.
    * 
    * @example
    * pi-rwxxx
@@ -36,8 +40,8 @@ export class ModifyDBClusterRequest extends $dara.Model {
    * @remarks
    * The cross-zone data replication mode of the cluster. Valid values:
    * 
-   * - **AsyncSync**: asynchronous
-   * - **SemiSync**: semi-synchronous
+   * - **AsyncSync**: Asynchronous.
+   * - **SemiSync**: Semi-synchronous.
    * 
    * @example
    * AsynSync
@@ -47,7 +51,7 @@ export class ModifyDBClusterRequest extends $dara.Model {
    * @remarks
    * The fault injection method. Valid values:
    * 
-   * - 0: instance fault injection based on `Crash SQL`
+   * - 0: Instance fault injection based on `Crash SQL`.
    * 
    * @example
    * 0
@@ -55,11 +59,11 @@ export class ModifyDBClusterRequest extends $dara.Model {
   faultInjectionType?: string;
   /**
    * @remarks
-   * The dimension of the disaster recovery drill for the cluster. Valid values:
-   * - `0` or `FaultInjection`: primary zone-level disaster recovery drill.
-   * - `1`: node-level disaster recovery drill.
-   * > - In the **primary zone-level disaster recovery drill** scenario, all compute nodes in the primary zone become unavailable. The failover in this scenario causes service interruptions.
-   * > - In the **node-level disaster recovery drill** scenario, only a single compute node is supported for the drill. Specify the desired compute node name by using `DBNodeCrashList`.
+   * The fault drill dimension for the cluster. Valid values:
+   * - `0` or `FaultInjection`: Primary zone dimension fault drill.
+   * - `1`: Node dimension fault drill.
+   * > - In the **primary zone dimension fault drill** scenario, all compute nodes in the primary zone become unavailable, and the disaster recovery switchover in this scenario is lossy.
+   * > - In the **node dimension fault drill** scenario, only a single compute node can be drilled. Pass the desired compute node name through `DBNodeCrashList`.
    * 
    * @example
    * 0
@@ -68,11 +72,11 @@ export class ModifyDBClusterRequest extends $dara.Model {
   /**
    * @remarks
    * The automatic IMCI-based query acceleration feature. Valid values:
-   * - `ON`: enabled.
-   * - `OFF`: disabled.
+   * - `ON`: Enabled.
+   * - `OFF`: Disabled.
    * 
    * > - Only PolarDB for MySQL clusters are supported.
-   * > - For cluster version requirements, see [Automatic acceleration (AutoIndex)](https://help.aliyun.com/document_detail/2854119.html).
+   * > - For cluster version limits, refer to [Automatic IMCI-based query acceleration (AutoIndex)](https://help.aliyun.com/document_detail/2854119.html).
    * 
    * @example
    * OFF
@@ -94,8 +98,8 @@ export class ModifyDBClusterRequest extends $dara.Model {
    * @remarks
    * The cross-zone automatic switchover mode of the cluster. Valid values:
    * 
-   * - **ON**: enables cross-zone automatic switchover.
-   * - **OFF**: disables cross-zone automatic switchover.
+   * - **ON**: Enables cross-zone automatic switchover.
+   * - **OFF**: Disables cross-zone automatic switchover.
    * 
    * @example
    * ON
@@ -103,10 +107,10 @@ export class ModifyDBClusterRequest extends $dara.Model {
   standbyHAMode?: string;
   /**
    * @remarks
-   * Specifies whether to enable automatic storage scaling for the Standard Edition cluster. Valid values:
+   * Specifies whether to enable automatic storage scaling for a Standard Edition cluster. Valid values:
    * 
-   * - Enable: enables automatic storage scaling.
-   * - Disable: disables automatic storage scaling.
+   * - Enable: Enables automatic storage scaling.
+   * - Disable: Disables automatic storage scaling.
    * 
    * @example
    * Enable
@@ -114,7 +118,7 @@ export class ModifyDBClusterRequest extends $dara.Model {
   storageAutoScale?: string;
   /**
    * @remarks
-   * The upper limit for automatic storage scaling of the Standard Edition cluster. Unit: GB.
+   * The upper limit for automatic storage scaling of a Standard Edition cluster. Unit: GB.
    * 
    * > The maximum value is 32000.
    * 
@@ -124,7 +128,7 @@ export class ModifyDBClusterRequest extends $dara.Model {
   storageUpperBound?: number;
   /**
    * @remarks
-   * The JSON string that contains the information about the databases and tables to be restored. The values of the database and table information are strings.
+   * The JSON string of the target database and table information to be restored. The values of the database and table information are all of the string type.
    * Example: `[
    *    {
    *        "tables":[
@@ -139,7 +143,7 @@ export class ModifyDBClusterRequest extends $dara.Model {
    *        "newname":"testdb_restore"
    *    }
    * ]`.
-   * > You can call the [DescribeMetaList](https://help.aliyun.com/document_detail/194770.html) operation to query the names of databases and tables that can be restored, and then specify the information in the corresponding fields in the preceding example.
+   * > You can call the [DescribeMetaList](https://help.aliyun.com/document_detail/194770.html) operation to view the details of the database and table names that support restoration, and fill the supported database and table information into the corresponding positions in the preceding example.
    * 
    * @example
    * [ { "tables":[ { "name":"testtb", "type":"table", "newname":"testtb_restore" } ], "name":"testdb", "type":"db", "newname":"testdb_restore" } ]

package/src/models/ModifyDbclusterResponseBody.ts

@@ -13,7 +13,7 @@ export class ModifyDBClusterResponseBody extends $dara.Model {
   DBClusterId?: string;
   /**
    * @remarks
-   * The order ID.
+   * The generated order ID.
    * 
    * @example
    * 2148126708*****

package/src/models/ModifyDbdescriptionZonalRequest.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class ModifyDBDescriptionZonalRequest extends $dara.Model {
   /**
    * @remarks
-   * A client token to ensure the idempotence of the request. The client generates this token. It must be unique across requests, case-sensitive, and up to 64 ASCII characters in length.
+   * The client token that is used to ensure the idempotence of the request and prevent duplicate submissions. The value is generated by the client, must be unique across different requests, is case-sensitive, and can be up to 64 ASCII characters in length.
    * 
    * @example
    * 6000170000591aed949d0f54a343f1a4233c1e7d1c5******
@@ -15,6 +15,8 @@ export class ModifyDBDescriptionZonalRequest extends $dara.Model {
    * @remarks
    * The cluster ID.
    * 
+   * > Note: This parameter accepts only edge (ENS) cluster IDs. The cluster must be created by calling CreateDBCluster(CloudProvider=ENS, EnsRegionId=xxx).
+   * 
    * This parameter is required.
    * 
    * @example
@@ -23,11 +25,9 @@ export class ModifyDBDescriptionZonalRequest extends $dara.Model {
   DBClusterId?: string;
   /**
    * @remarks
-   * The description of the database. The description must meet the following requirements:
-   * 
-   * - It cannot start with `http://` or `https://`.
-   * 
-   * - It must be 2 to 256 characters in length.
+   * The description of the database. The description must meet the following requirements: 
+   * * It cannot start with `http://` or `https://`. 
+   * * It must be 2 to 256 characters in length.
    * 
    * This parameter is required.
    * 
@@ -37,7 +37,7 @@ export class ModifyDBDescriptionZonalRequest extends $dara.Model {
   DBDescription?: string;
   /**
    * @remarks
-   * The database name.
+   * The name of the database.
    * 
    * This parameter is required.
    * 

package/src/models/ModifyDbnodesClassRequest.ts

@@ -5,9 +5,8 @@ import * as $dara from '@darabonba/typescript';
 export class ModifyDBNodesClassRequestDBNode extends $dara.Model {
   /**
    * @remarks
-   * The ID of the cluster node.
-   * 
-   * > If you specify this parameter, you must also specify DBNode.N.TargetClass. N represents the index of the node in the request, starting from 1.
+   * The cluster node ID.
+   * >If this parameter is specified, DBNode.N.TargetClass is required. N is an integer that starts from 1. Maximum value: 16 minus the current number of nodes.
    * 
    * @example
    * pi-*************
@@ -15,9 +14,9 @@ export class ModifyDBNodesClassRequestDBNode extends $dara.Model {
   DBNodeId?: string;
   /**
    * @remarks
-   * The target specifications of the node. For more information about node specifications, see [compute node specifications](https://help.aliyun.com/document_detail/102542.html).
+   * The specifications of the node to be changed. For more information about node specifications, see [Compute node specifications](https://help.aliyun.com/document_detail/102542.html). 
    * 
-   * > If you specify this parameter, you must also specify DBNode.N.DBNodeId. N represents the index of the node in the request, starting from 1.
+   * >If this parameter is specified, DBNode.N.DBNodeId is required. N is an integer that starts from 1. Maximum value: 16 minus the current number of nodes.
    * 
    * @example
    * polar.mysql.x4.medium
@@ -49,16 +48,14 @@ export class ModifyDBNodesClassRequestDBNode extends $dara.Model {
 export class ModifyDBNodesClassRequest extends $dara.Model {
   /**
    * @remarks
-   * Specifies whether to automatically apply a coupon. Valid values:
-   * 
-   * - true (Default): A coupon is automatically applied.
-   * 
-   * - false: A coupon is not applied.
+   * Specifies whether to automatically use coupons. Valid values:
+   * * true (default): Uses coupons.
+   * * false: Does not use coupons.
    */
   autoUseCoupon?: boolean;
   /**
    * @remarks
-   * A client-generated token to ensure request idempotence. This token must be unique for each request and must be a case-sensitive string of up to 64 ASCII characters.
+   * The client token that is used to ensure the idempotence of the request. You can use the client to generate the value. Make sure that the value is unique among different requests. The token is case-sensitive and cannot exceed 64 ASCII characters in length.
    * 
    * @example
    * 6000170000591aed949d0f54a343f1a4233c1e7d1c5c******
@@ -66,7 +63,7 @@ export class ModifyDBNodesClassRequest extends $dara.Model {
   clientToken?: string;
   /**
    * @remarks
-   * The cloud provider of the instance.
+   * The cloud service provider to which the instance belongs.
    * 
    * @example
    * ENS
@@ -91,7 +88,7 @@ export class ModifyDBNodesClassRequest extends $dara.Model {
   DBNode?: ModifyDBNodesClassRequestDBNode[];
   /**
    * @remarks
-   * The modification type. Valid values:
+   * The type of the specification change. Valid values:
    * 
    * - **Upgrade**: Upgrades the specifications.
    * 
@@ -107,11 +104,9 @@ export class ModifyDBNodesClassRequest extends $dara.Model {
   ownerId?: number;
   /**
    * @remarks
-   * The latest time to begin the scheduled task. Specify the time in UTC using the `YYYY-MM-DDThh:mm:ssZ` format.
-   * 
-   * > - The latest start time must be at least 30 minutes later than the earliest start time.
-   * >
-   * > - If you specify `PlannedStartTime` but not this parameter, the task starts within 30 minutes of the `PlannedStartTime`. For example, if you set `PlannedStartTime` to `2021-01-14T09:00:00Z` and leave this parameter empty, the task will start by `2021-01-14T09:30:00Z`.
+   * The latest time to start the scheduled task. Specify the time in the `YYYY-MM-DDThh:mm:ssZ` format (UTC).
+   * > * The latest time must be at least 30 minutes later than the start time.
+   * > * If `PlannedStartTime` is set but this parameter is not specified, the latest time to execute the task defaults to `start time + 30 minutes`. For example, if `PlannedStartTime` is set to `2021-01-14T09:00:00Z` and this parameter is left empty, the task starts no later than `2021-01-14T09:30:00Z`.
    * 
    * @example
    * 2021-01-14T09:30:00Z
@@ -119,7 +114,9 @@ export class ModifyDBNodesClassRequest extends $dara.Model {
   plannedEndTime?: string;
   /**
    * @remarks
-   * The planned time for the transient disconnection.
+   * The planned transient disconnection time.
+   * 
+   * The time is in the ISO 8601 format in UTC (format: YYYY-MM-DDTHH:mm:ssZ).
    * 
    * @example
    * 2021-01-14T09:30:00Z
@@ -127,13 +124,10 @@ export class ModifyDBNodesClassRequest extends $dara.Model {
   plannedFlashingOffTime?: string;
   /**
    * @remarks
-   * The earliest time to begin the scheduled upgrade of the node specifications. Specify the time in UTC using the `YYYY-MM-DDThh:mm:ssZ` format.
-   * 
-   * > - This parameter takes effect only when `ModifyType` is set to `Upgrade`.
-   * >
-   * > - The specified time must be within the next 24 hours.
-   * >
-   * > - If this parameter is not specified, the upgrade task runs immediately.
+   * The earliest time to start the scheduled (executed within the target time period) specification upgrade task. Specify the time in the `YYYY-MM-DDThh:mm:ssZ` format (UTC).
+   * > * This parameter takes effect only when `ModifyType` is set to `Upgrade`.
+   * > * The start time can be any time point within the next 24 hours. For example, if the current time is `2021-01-14T09:00:00Z`, the start time can range from `2021-01-14T09:00:00Z` to `2021-01-15T09:00:00Z`.
+   * > * If this parameter is left empty, the specification upgrade task is immediately executed by default.
    * 
    * @example
    * 2021-01-14T09:00:00Z
@@ -141,7 +135,7 @@ export class ModifyDBNodesClassRequest extends $dara.Model {
   plannedStartTime?: string;
   /**
    * @remarks
-   * The coupon code. If you do not specify this parameter, a default coupon is applied.
+   * The coupon code. If this parameter is not specified, the default coupon is used.
    * 
    * @example
    * 727xxxxxx934
@@ -151,11 +145,11 @@ export class ModifyDBNodesClassRequest extends $dara.Model {
   resourceOwnerId?: number;
   /**
    * @remarks
-   * The sub-category of the cluster. Valid values:
+   * The cluster sub-series. Valid values:
    * 
-   * - **normal_exclusive**: dedicated specifications
+   * - **normal_exclusive**: Dedicated
    * 
-   * - **normal_general**: general-purpose specifications
+   * - **normal_general**: General-purpose
    * 
    * @example
    * normal_general

package/src/models/ModifyEncryptionDbsecretRequest.ts

@@ -16,10 +16,8 @@ export class ModifyEncryptionDBSecretRequest extends $dara.Model {
   /**
    * @remarks
    * The status of the key. Valid values:
-   * 
-   * - **Enabled**
-   * 
-   * - **Disabled**
+   * - **Enabled**: Enabled.
+   * - **Disabled**: Disabled.
    * 
    * @example
    * Enabled
@@ -39,7 +37,7 @@ export class ModifyEncryptionDBSecretRequest extends $dara.Model {
   resourceOwnerId?: number;
   /**
    * @remarks
-   * The Global Resource Descriptor (GRD) of the role. For more information, see [Overview of RAM roles](https://help.aliyun.com/document_detail/93689.html).
+   * The global resource descriptor of the RAM role. The descriptor is used to specify a RAM role. For details, see [RAM role overview](https://help.aliyun.com/document_detail/93689.html).
    * 
    * @example
    * acs:ram::1406926*****:role/aliyunrdsinstanceencryptiondefaultrole

package/src/models/ModifyEncryptionDbsecretResponseBody.ts

@@ -13,9 +13,8 @@ export class ModifyEncryptionDBSecretResponseBody extends $dara.Model {
   DBClusterId?: string;
   /**
    * @remarks
-   * The returned message.
-   * 
-   * > If the request is successful, \\`Successful\\` is returned. If the request fails, an error message is returned, such as an error code.
+   * The message returned for the request.
+   * >If the request is successful, **Successful** is returned. If the request fails, an error message such as an error code is returned.
    * 
    * @example
    * Successful
@@ -23,7 +22,7 @@ export class ModifyEncryptionDBSecretResponseBody extends $dara.Model {
   message?: string;
   /**
    * @remarks
-   * The ID of the request.
+   * Id of the request
    * 
    * @example
    * 4CE6DF97-AEA4-484F-906F-C407EE******
@@ -31,11 +30,11 @@ export class ModifyEncryptionDBSecretResponseBody extends $dara.Model {
   requestId?: string;
   /**
    * @remarks
-   * Indicates whether the request was successful. Valid values:
+   * The result of the request. Valid values:
    * 
-   * - **true**
+   * - **true**: The request is successful.
    * 
-   * - **false**
+   * - **false**: The request fails.
    * 
    * @example
    * true

package/src/models/ModifyLogBackupPolicyRequest.ts

@@ -6,12 +6,9 @@ export class ModifyLogBackupPolicyRequestAdvancedLogPolicies extends $dara.Model
   /**
    * @remarks
    * The operation type. Valid values:
-   * 
-   * - **CREATE**: Create
-   * 
-   * - **UPDATE**: Update
-   * 
-   * - **DELETE**: Delete
+   * - **CREATE**: creates a policy.
+   * - **UPDATE**: updates a policy.
+   * - **DELETE**: deletes a policy.
    * 
    * @example
    * CREATE
@@ -28,11 +25,8 @@ export class ModifyLogBackupPolicyRequestAdvancedLogPolicies extends $dara.Model
   /**
    * @remarks
    * The destination type of the backup policy. Valid values:
-   * 
    * - **level1**: level-1 backup
-   * 
    * - **level2**: level-2 backup
-   * 
    * - **level2Cross**: level-2 cross-region backup
    * 
    * @example
@@ -41,7 +35,7 @@ export class ModifyLogBackupPolicyRequestAdvancedLogPolicies extends $dara.Model
   destType?: string;
   /**
    * @remarks
-   * Specifies whether to enable log backup. Set the value to 1.
+   * Specifies whether to enable log backup. The value is fixed to 1.
    * 
    * @example
    * 1
@@ -49,11 +43,10 @@ export class ModifyLogBackupPolicyRequestAdvancedLogPolicies extends $dara.Model
   enableLogBackup?: number;
   /**
    * @remarks
-   * The retention period type for log backups. Valid values:
-   * 
-   * - **never**: The backups never expire.
+   * The log backup retention period type. Valid values:
    * 
-   * - **delay**: The backups expire after a fixed number of days.
+   * - **never**: never expires
+   * - **delay**: expires after a fixed number of days
    * 
    * @example
    * delay
@@ -61,11 +54,9 @@ export class ModifyLogBackupPolicyRequestAdvancedLogPolicies extends $dara.Model
   logRetentionType?: string;
   /**
    * @remarks
-   * The number of days to retain the log backups. Valid values:
-   * 
-   * - 3 to 7300: The retention period in days.
-   * 
-   * - -1: long-term retention.
+   * The log backup retention period in days. Valid values:
+   * * 3 to 7300: the log retention period, in days.
+   * * -1: long-term retention (LTR).
    * 
    * @example
    * 10
@@ -92,11 +83,8 @@ export class ModifyLogBackupPolicyRequestAdvancedLogPolicies extends $dara.Model
    * The source type of the log backup policy. Valid values:
    * 
    * - **db**: database cluster
-   * 
    * - **level1**: level-1 backup
-   * 
    * - **level2**: level-2 backup
-   * 
    * - **level2Cross**: level-2 cross-region backup
    * 
    * @example
@@ -143,18 +131,15 @@ export class ModifyLogBackupPolicyRequestAdvancedLogPolicies extends $dara.Model
 export class ModifyLogBackupPolicyRequest extends $dara.Model {
   /**
    * @remarks
-   * The advanced backup policies.
-   * 
-   * > - - This parameter is not supported for PolarDB for PostgreSQL (Oracle Compatible) or PolarDB for PostgreSQL.
-   * >
-   * > - - This parameter is supported only for clusters for which the BackupPolicyLevel parameter is set to Advanced.
+   * The advanced backup policy.
+   * > *  * This parameter is not supported by PolarDB for PostgreSQL (Compatible with Oracle) or PolarDB for PostgreSQL.
+   * > * * This parameter is supported only by clusters whose BackupPolicyLevel is set to Advanced.
    */
   advancedLogPolicies?: ModifyLogBackupPolicyRequestAdvancedLogPolicies[];
   /**
    * @remarks
    * The cluster ID.
-   * 
-   * > Call the [DescribeDBClusters](https://help.aliyun.com/document_detail/98094.html) operation to view information about all clusters in a specific region, including cluster IDs.
+   * > You can call the [DescribeDBClusters](https://help.aliyun.com/document_detail/98094.html) operation to query all clusters in a specific region, including their cluster IDs.
    * 
    * This parameter is required.
    * 
@@ -164,9 +149,8 @@ export class ModifyLogBackupPolicyRequest extends $dara.Model {
   DBClusterId?: string;
   /**
    * @remarks
-   * The destination region for cross-region log backups. For information about the regions that support cross-region backup, see [Overview](https://help.aliyun.com/document_detail/72672.html).
-   * 
-   * > - - After you enable the advanced backup feature, this parameter is no longer valid. Use the AdvancedLogPolicies parameter instead.
+   * The region for cross-region log backup. For more information about the regions that support cross-region backup, see [Overview](https://help.aliyun.com/document_detail/72672.html).
+   * > * * After advanced backup is enabled, this parameter no longer takes effect. Use the AdvancedLogPolicies parameter instead.
    * 
    * @example
    * cn-hangzhou
@@ -174,17 +158,14 @@ export class ModifyLogBackupPolicyRequest extends $dara.Model {
   logBackupAnotherRegionRegion?: string;
   /**
    * @remarks
-   * The retention period of cross-region log backups. Valid values:
+   * The retention period for cross-region backups. Valid values:
    * 
-   * - **0**: Disables the cross-region log backup feature.
+   * - **0**: disables the cross-region backup feature.
+   * - **30 to 7300**: the retention period for cross-region backups, in days.
+   * - **-1**: long-term retention (LTR).
    * 
-   * - **30 to 7300**: The retention period in days.
-   * 
-   * - **-1**: long-term retention.
-   * 
-   * > * * When you create a cluster, the default value of this parameter is **0**. This value disables the cross-region log backup feature.
-   * >
-   * > * - After you enable the advanced backup feature, this parameter is no longer valid. Use the AdvancedLogPolicies parameter instead.
+   * > * * When a cluster is created, the default value is **0**, which indicates that the cross-region backup feature is disabled.
+   * > * * After advanced backup is enabled, this parameter no longer takes effect. Use the AdvancedLogPolicies parameter instead.
    * 
    * @example
    * 30
@@ -192,13 +173,11 @@ export class ModifyLogBackupPolicyRequest extends $dara.Model {
   logBackupAnotherRegionRetentionPeriod?: string;
   /**
    * @remarks
-   * The retention period of log backups. Valid values:
-   * 
-   * - 3 to 7300: The retention period in days.
-   * 
-   * - -1: long-term retention.
+   * The log retention period. Valid values:
+   * * 3 to 7300: the log retention period, in days.
+   * * -1: long-term retention (LTR).
    * 
-   * > * * After you enable the advanced backup feature, this parameter is no longer valid. Use the AdvancedLogPolicies parameter instead.
+   * > * * After advanced backup is enabled, this parameter no longer takes effect. Use the AdvancedLogPolicies parameter instead.
    * 
    * @example
    * 3

package/src/models/ModifyLogBackupPolicyShrinkRequest.ts

@@ -5,18 +5,15 @@ import * as $dara from '@darabonba/typescript';
 export class ModifyLogBackupPolicyShrinkRequest extends $dara.Model {
   /**
    * @remarks
-   * The advanced backup policies.
-   * 
-   * > - - This parameter is not supported for PolarDB for PostgreSQL (Oracle Compatible) or PolarDB for PostgreSQL.
-   * >
-   * > - - This parameter is supported only for clusters for which the BackupPolicyLevel parameter is set to Advanced.
+   * The advanced backup policy.
+   * > *  * This parameter is not supported by PolarDB for PostgreSQL (Compatible with Oracle) or PolarDB for PostgreSQL.
+   * > * * This parameter is supported only by clusters whose BackupPolicyLevel is set to Advanced.
    */
   advancedLogPoliciesShrink?: string;
   /**
    * @remarks
    * The cluster ID.
-   * 
-   * > Call the [DescribeDBClusters](https://help.aliyun.com/document_detail/98094.html) operation to view information about all clusters in a specific region, including cluster IDs.
+   * > You can call the [DescribeDBClusters](https://help.aliyun.com/document_detail/98094.html) operation to query all clusters in a specific region, including their cluster IDs.
    * 
    * This parameter is required.
    * 
@@ -26,9 +23,8 @@ export class ModifyLogBackupPolicyShrinkRequest extends $dara.Model {
   DBClusterId?: string;
   /**
    * @remarks
-   * The destination region for cross-region log backups. For information about the regions that support cross-region backup, see [Overview](https://help.aliyun.com/document_detail/72672.html).
-   * 
-   * > - - After you enable the advanced backup feature, this parameter is no longer valid. Use the AdvancedLogPolicies parameter instead.
+   * The region for cross-region log backup. For more information about the regions that support cross-region backup, see [Overview](https://help.aliyun.com/document_detail/72672.html).
+   * > * * After advanced backup is enabled, this parameter no longer takes effect. Use the AdvancedLogPolicies parameter instead.
    * 
    * @example
    * cn-hangzhou
@@ -36,17 +32,14 @@ export class ModifyLogBackupPolicyShrinkRequest extends $dara.Model {
   logBackupAnotherRegionRegion?: string;
   /**
    * @remarks
-   * The retention period of cross-region log backups. Valid values:
-   * 
-   * - **0**: Disables the cross-region log backup feature.
+   * The retention period for cross-region backups. Valid values:
    * 
-   * - **30 to 7300**: The retention period in days.
+   * - **0**: disables the cross-region backup feature.
+   * - **30 to 7300**: the retention period for cross-region backups, in days.
+   * - **-1**: long-term retention (LTR).
    * 
-   * - **-1**: long-term retention.
-   * 
-   * > * * When you create a cluster, the default value of this parameter is **0**. This value disables the cross-region log backup feature.
-   * >
-   * > * - After you enable the advanced backup feature, this parameter is no longer valid. Use the AdvancedLogPolicies parameter instead.
+   * > * * When a cluster is created, the default value is **0**, which indicates that the cross-region backup feature is disabled.
+   * > * * After advanced backup is enabled, this parameter no longer takes effect. Use the AdvancedLogPolicies parameter instead.
    * 
    * @example
    * 30
@@ -54,13 +47,11 @@ export class ModifyLogBackupPolicyShrinkRequest extends $dara.Model {
   logBackupAnotherRegionRetentionPeriod?: string;
   /**
    * @remarks
-   * The retention period of log backups. Valid values:
-   * 
-   * - 3 to 7300: The retention period in days.
-   * 
-   * - -1: long-term retention.
+   * The log retention period. Valid values:
+   * * 3 to 7300: the log retention period, in days.
+   * * -1: long-term retention (LTR).
    * 
-   * > * * After you enable the advanced backup feature, this parameter is no longer valid. Use the AdvancedLogPolicies parameter instead.
+   * > * * After advanced backup is enabled, this parameter no longer takes effect. Use the AdvancedLogPolicies parameter instead.
    * 
    * @example
    * 3