@alicloud/esa20240910 3.4.0 → 3.5.0

package/dist/models/BatchCreateWafRulesRequest.d.ts

@@ -4,28 +4,29 @@ import { WafBatchRuleShared } from "./WafBatchRuleShared";
 export declare class BatchCreateWafRulesRequest extends $dara.Model {
     /**
      * @remarks
-     * An array of rule configurations. Each object defines the settings for a single rule.
-     */
-    configs?: WafRuleConfig[];
-    /**
-     * @remarks
-     * The WAF phase in which the rules are executed.
-     *
-     * - `http_whitelist`: whitelist rule
+     * The list of rule configurations. Specifies the detailed configuration for each rule.
      *
-     * - `http_custom`: custom rule
+     * **Required subfields for each phase** (applicable only to the two phases supported by this batch operation):
      *
-     * - `http_managed`: managed rule
+     * - `http_anti_scan`: You must specify `Type` and at least one of `ManagedList` or `RateLimit`.
+     * - `http_bot`: You must specify the advanced mode bots configuration. The subfields are defined in the `WafRuleConfig` data structure.
      *
-     * - `http_anti_scan`: scan protection rule
+     * > Note: Other phases such as `http_custom` and `http_whitelist` cannot use this batch operation. Use the single-rule operation `CreateWafRule` instead. The subfield constraints are described in the single-rule operation documentation.
      *
-     * - `http_ratelimit`: rate limit rule
+     * > If `Configs` is not specified or required subfields are missing, the service returns `InvalidParameter(400)` or `Rule.Config.Malformed`.
+     */
+    configs?: WafRuleConfig[];
+    /**
+     * @remarks
+     * The WAF rule execution phase. This **batch operation supports only** the following two phases. For other phases, use the single-rule operations `CreateWafRule` or `UpdateWafRule`:
+     * - `http_anti_scan`: scan protection rules
+     * - `http_bot`: advanced mode bots
      *
-     * - `ip_access_rule`: IP access rule
+     * > Note: The `http_anti_scan` and `http_bot` phases **support only batch creation**. The single-rule operation `CreateWafRule` does not accept these two values. Conversely, other phases such as `http_custom` and `http_whitelist` can be created only by using single-rule operations and cannot use this batch operation.
      *
-     * - `http_bot`: bot control rule
+     * **Required constraint**: Although this parameter is marked as optional (required: false) in the specification, it is **required** when you call this batch operation. If this parameter is not specified, the service returns `InvalidParameter(400)`.
      *
-     * - `http_security_level_rule`: security rule
+     * **Plan prerequisite**: `http_anti_scan` requires the site to have a **high or higher plan**. Calling this operation with a basic plan returns `Phase.HttpAntiScan.NotSupport`. Verify the site plan before calling this operation.
      *
      * @example
      * http_anti_scan
@@ -33,7 +34,7 @@ export declare class BatchCreateWafRulesRequest extends $dara.Model {
     phase?: string;
     /**
      * @remarks
-     * The ID of the WAF ruleset. You can call the [ListWafRulesets](https://help.aliyun.com/document_detail/2878359.html) operation to obtain this ID.
+     * The ID of the WAF ruleset. You can call the [ListWafRulesets](https://help.aliyun.com/document_detail/2878359.html) operation to obtain the ruleset ID.
      *
      * @example
      * 10000001
@@ -41,12 +42,16 @@ export declare class BatchCreateWafRulesRequest extends $dara.Model {
     rulesetId?: number;
     /**
      * @remarks
-     * The shared configuration object that specifies common properties for all rules created in the batch.
+     * The shared configuration for multiple rules. Specifies the common properties of multiple rules.
+     *
+     * **Conditionally required**: Although this parameter is marked as optional (required: false) in the specification, it is **required** when `Phase=http_anti_scan`. If this parameter is not specified, the service returns `InvalidParameter(400)`.
+     *
+     * **Subfield requirements**: In the `http_anti_scan` phase, Shared must include shared fields such as `Name` (rule name) and `Action` (rule action). For other phases, the required subfields of Shared vary depending on the specific phase.
      */
     shared?: WafBatchRuleShared;
     /**
      * @remarks
-     * The ID of the site. You can call the [ListSites](https://help.aliyun.com/document_detail/2850189.html) operation to obtain this ID.
+     * The site ID. You can call the [ListSites](https://help.aliyun.com/document_detail/2850189.html) operation to obtain the site ID.
      *
      * This parameter is required.
      *
@@ -56,7 +61,7 @@ export declare class BatchCreateWafRulesRequest extends $dara.Model {
     siteId?: number;
     /**
      * @remarks
-     * For sites with version management enabled, use this parameter to specify which site version the configuration applies to. The default value is 0.
+     * The version number of the site configuration. For sites with version management enabled, you can use this parameter to specify the site version on which the configuration takes effect. The default value is 0.
      *
      * @example
      * 0

package/dist/models/BatchCreateWafRulesRequest.js.map

@@ -1 +1 @@
-{"version":3,"file":"BatchCreateWafRulesRequest.js","sourceRoot":"","sources":["../../src/models/BatchCreateWafRulesRequest.ts"],"names":[],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAAA,6CAA6C;AAC7C,6DAA+C;AAC/C,mDAAgD;AAChD,6DAA0D;AAG1D,MAAa,0BAA2B,SAAQ,KAAK,CAAC,KAAK;IA6DzD,MAAM,CAAC,KAAK;QACV,OAAO;YACL,OAAO,EAAE,SAAS;YAClB,KAAK,EAAE,OAAO;YACd,SAAS,EAAE,WAAW;YACtB,MAAM,EAAE,QAAQ;YAChB,MAAM,EAAE,QAAQ;YAChB,WAAW,EAAE,aAAa;SAC3B,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,OAAO,EAAE,EAAE,MAAM,EAAE,OAAO,EAAE,UAAU,EAAE,6BAAa,EAAE;YACvD,KAAK,EAAE,QAAQ;YACf,SAAS,EAAE,QAAQ;YACnB,MAAM,EAAE,uCAAkB;YAC1B,MAAM,EAAE,QAAQ;YAChB,WAAW,EAAE,QAAQ;SACtB,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,IAAG,KAAK,CAAC,OAAO,CAAC,IAAI,CAAC,OAAO,CAAC,EAAE,CAAC;YAC/B,KAAK,CAAC,KAAK,CAAC,aAAa,CAAC,IAAI,CAAC,OAAO,CAAC,CAAC;QAC1C,CAAC;QACD,IAAG,IAAI,CAAC,MAAM,IAAI,OAAQ,IAAI,CAAC,MAAc,CAAC,QAAQ,KAAK,UAAU,EAAE,CAAC;YACrE,IAAI,CAAC,MAAc,CAAC,QAAQ,EAAE,CAAC;QAClC,CAAC;QACD,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AAhGD,gEAgGC"}
+{"version":3,"file":"BatchCreateWafRulesRequest.js","sourceRoot":"","sources":["../../src/models/BatchCreateWafRulesRequest.ts"],"names":[],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAAA,6CAA6C;AAC7C,6DAA+C;AAC/C,mDAAgD;AAChD,6DAA0D;AAG1D,MAAa,0BAA2B,SAAQ,KAAK,CAAC,KAAK;IAkEzD,MAAM,CAAC,KAAK;QACV,OAAO;YACL,OAAO,EAAE,SAAS;YAClB,KAAK,EAAE,OAAO;YACd,SAAS,EAAE,WAAW;YACtB,MAAM,EAAE,QAAQ;YAChB,MAAM,EAAE,QAAQ;YAChB,WAAW,EAAE,aAAa;SAC3B,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,OAAO,EAAE,EAAE,MAAM,EAAE,OAAO,EAAE,UAAU,EAAE,6BAAa,EAAE;YACvD,KAAK,EAAE,QAAQ;YACf,SAAS,EAAE,QAAQ;YACnB,MAAM,EAAE,uCAAkB;YAC1B,MAAM,EAAE,QAAQ;YAChB,WAAW,EAAE,QAAQ;SACtB,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,IAAG,KAAK,CAAC,OAAO,CAAC,IAAI,CAAC,OAAO,CAAC,EAAE,CAAC;YAC/B,KAAK,CAAC,KAAK,CAAC,aAAa,CAAC,IAAI,CAAC,OAAO,CAAC,CAAC;QAC1C,CAAC;QACD,IAAG,IAAI,CAAC,MAAM,IAAI,OAAQ,IAAI,CAAC,MAAc,CAAC,QAAQ,KAAK,UAAU,EAAE,CAAC;YACrE,IAAI,CAAC,MAAc,CAAC,QAAQ,EAAE,CAAC;QAClC,CAAC;QACD,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AArGD,gEAqGC"}

package/dist/models/BatchCreateWafRulesResponseBody.d.ts

@@ -2,7 +2,7 @@ import * as $dara from '@darabonba/typescript';
 export declare class BatchCreateWafRulesResponseBody extends $dara.Model {
     /**
      * @remarks
-     * An array of IDs for the newly created WAF rules. You can call the [ListWafRules](https://help.aliyun.com/document_detail/2878257.html) operation to obtain the details of a specific rule.
+     * The IDs of the WAF rules. You can call the [ListWafRules](https://help.aliyun.com/document_detail/2878257.html) operation to obtain the rule IDs.
      */
     ids?: number[];
     /**
@@ -15,7 +15,7 @@ export declare class BatchCreateWafRulesResponseBody extends $dara.Model {
     requestId?: string;
     /**
      * @remarks
-     * The ID of the WAF ruleset. You can call the [ListWafRulesets](https://help.aliyun.com/document_detail/2878359.html) operation to obtain this ID.
+     * The ID of the WAF ruleset. You can call the [ListWafRulesets](https://help.aliyun.com/document_detail/2878359.html) operation to obtain the ruleset ID.
      *
      * @example
      * 10000001

package/dist/models/BatchCreateWafRulesShrinkRequest.d.ts

@@ -2,28 +2,29 @@ import * as $dara from '@darabonba/typescript';
 export declare class BatchCreateWafRulesShrinkRequest extends $dara.Model {
     /**
      * @remarks
-     * An array of rule configurations. Each object defines the settings for a single rule.
-     */
-    configsShrink?: string;
-    /**
-     * @remarks
-     * The WAF phase in which the rules are executed.
-     *
-     * - `http_whitelist`: whitelist rule
+     * The list of rule configurations. Specifies the detailed configuration for each rule.
      *
-     * - `http_custom`: custom rule
+     * **Required subfields for each phase** (applicable only to the two phases supported by this batch operation):
      *
-     * - `http_managed`: managed rule
+     * - `http_anti_scan`: You must specify `Type` and at least one of `ManagedList` or `RateLimit`.
+     * - `http_bot`: You must specify the advanced mode bots configuration. The subfields are defined in the `WafRuleConfig` data structure.
      *
-     * - `http_anti_scan`: scan protection rule
+     * > Note: Other phases such as `http_custom` and `http_whitelist` cannot use this batch operation. Use the single-rule operation `CreateWafRule` instead. The subfield constraints are described in the single-rule operation documentation.
      *
-     * - `http_ratelimit`: rate limit rule
+     * > If `Configs` is not specified or required subfields are missing, the service returns `InvalidParameter(400)` or `Rule.Config.Malformed`.
+     */
+    configsShrink?: string;
+    /**
+     * @remarks
+     * The WAF rule execution phase. This **batch operation supports only** the following two phases. For other phases, use the single-rule operations `CreateWafRule` or `UpdateWafRule`:
+     * - `http_anti_scan`: scan protection rules
+     * - `http_bot`: advanced mode bots
      *
-     * - `ip_access_rule`: IP access rule
+     * > Note: The `http_anti_scan` and `http_bot` phases **support only batch creation**. The single-rule operation `CreateWafRule` does not accept these two values. Conversely, other phases such as `http_custom` and `http_whitelist` can be created only by using single-rule operations and cannot use this batch operation.
      *
-     * - `http_bot`: bot control rule
+     * **Required constraint**: Although this parameter is marked as optional (required: false) in the specification, it is **required** when you call this batch operation. If this parameter is not specified, the service returns `InvalidParameter(400)`.
      *
-     * - `http_security_level_rule`: security rule
+     * **Plan prerequisite**: `http_anti_scan` requires the site to have a **high or higher plan**. Calling this operation with a basic plan returns `Phase.HttpAntiScan.NotSupport`. Verify the site plan before calling this operation.
      *
      * @example
      * http_anti_scan
@@ -31,7 +32,7 @@ export declare class BatchCreateWafRulesShrinkRequest extends $dara.Model {
     phase?: string;
     /**
      * @remarks
-     * The ID of the WAF ruleset. You can call the [ListWafRulesets](https://help.aliyun.com/document_detail/2878359.html) operation to obtain this ID.
+     * The ID of the WAF ruleset. You can call the [ListWafRulesets](https://help.aliyun.com/document_detail/2878359.html) operation to obtain the ruleset ID.
      *
      * @example
      * 10000001
@@ -39,12 +40,16 @@ export declare class BatchCreateWafRulesShrinkRequest extends $dara.Model {
     rulesetId?: number;
     /**
      * @remarks
-     * The shared configuration object that specifies common properties for all rules created in the batch.
+     * The shared configuration for multiple rules. Specifies the common properties of multiple rules.
+     *
+     * **Conditionally required**: Although this parameter is marked as optional (required: false) in the specification, it is **required** when `Phase=http_anti_scan`. If this parameter is not specified, the service returns `InvalidParameter(400)`.
+     *
+     * **Subfield requirements**: In the `http_anti_scan` phase, Shared must include shared fields such as `Name` (rule name) and `Action` (rule action). For other phases, the required subfields of Shared vary depending on the specific phase.
      */
     sharedShrink?: string;
     /**
      * @remarks
-     * The ID of the site. You can call the [ListSites](https://help.aliyun.com/document_detail/2850189.html) operation to obtain this ID.
+     * The site ID. You can call the [ListSites](https://help.aliyun.com/document_detail/2850189.html) operation to obtain the site ID.
      *
      * This parameter is required.
      *
@@ -54,7 +59,7 @@ export declare class BatchCreateWafRulesShrinkRequest extends $dara.Model {
     siteId?: number;
     /**
      * @remarks
-     * For sites with version management enabled, use this parameter to specify which site version the configuration applies to. The default value is 0.
+     * The version number of the site configuration. For sites with version management enabled, you can use this parameter to specify the site version on which the configuration takes effect. The default value is 0.
      *
      * @example
      * 0

package/dist/models/BatchCreateWafRulesShrinkRequest.js.map

@@ -1 +1 @@
-{"version":3,"file":"BatchCreateWafRulesShrinkRequest.js","sourceRoot":"","sources":["../../src/models/BatchCreateWafRulesShrinkRequest.ts"],"names":[],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAAA,6CAA6C;AAC7C,6DAA+C;AAG/C,MAAa,gCAAiC,SAAQ,KAAK,CAAC,KAAK;IA6D/D,MAAM,CAAC,KAAK;QACV,OAAO;YACL,aAAa,EAAE,SAAS;YACxB,KAAK,EAAE,OAAO;YACd,SAAS,EAAE,WAAW;YACtB,YAAY,EAAE,QAAQ;YACtB,MAAM,EAAE,QAAQ;YAChB,WAAW,EAAE,aAAa;SAC3B,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,aAAa,EAAE,QAAQ;YACvB,KAAK,EAAE,QAAQ;YACf,SAAS,EAAE,QAAQ;YACnB,YAAY,EAAE,QAAQ;YACtB,MAAM,EAAE,QAAQ;YAChB,WAAW,EAAE,QAAQ;SACtB,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AA1FD,4EA0FC"}
+{"version":3,"file":"BatchCreateWafRulesShrinkRequest.js","sourceRoot":"","sources":["../../src/models/BatchCreateWafRulesShrinkRequest.ts"],"names":[],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAAA,6CAA6C;AAC7C,6DAA+C;AAG/C,MAAa,gCAAiC,SAAQ,KAAK,CAAC,KAAK;IAkE/D,MAAM,CAAC,KAAK;QACV,OAAO;YACL,aAAa,EAAE,SAAS;YACxB,KAAK,EAAE,OAAO;YACd,SAAS,EAAE,WAAW;YACtB,YAAY,EAAE,QAAQ;YACtB,MAAM,EAAE,QAAQ;YAChB,WAAW,EAAE,aAAa;SAC3B,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,aAAa,EAAE,QAAQ;YACvB,KAAK,EAAE,QAAQ;YACf,SAAS,EAAE,QAAQ;YACnB,YAAY,EAAE,QAAQ;YACtB,MAAM,EAAE,QAAQ;YAChB,WAAW,EAAE,QAAQ;SACtB,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AA/FD,4EA+FC"}

package/dist/models/BatchUpdateWafRulesRequest.d.ts

@@ -4,28 +4,30 @@ import { WafBatchRuleShared } from "./WafBatchRuleShared";
 export declare class BatchUpdateWafRulesRequest extends $dara.Model {
     /**
      * @remarks
-     * A list of configurations for individual rules.
-     */
-    configs?: WafRuleConfig[];
-    /**
-     * @remarks
-     * The WAF rule runtime phase.
+     * The list of rule configurations. Specifies the detailed configuration for each rule.
      *
-     * - `http_whitelist`: whitelist rule
+     * **Required subfields for each phase** (applicable only to the two phases supported by this batch operation):
      *
-     * - `http_custom`: custom rule
+     * - `http_anti_scan`: You must provide `Type` and at least one of `ManagedList` or `RateLimit`.
+     * - `http_bot`: You must provide the advanced mode bots configuration. The subfields are defined in the `WafRuleConfig` data structure.
      *
-     * - `http_managed`: managed rule
+     * > Note: Other phases such as `http_custom` and `http_whitelist` cannot use this batch operation. Use the single-rule operation `UpdateWafRule` instead. The subfield constraints for those phases are described in the single-rule operation documentation.
      *
-     * - `http_anti_scan`: scan protection rule
+     * > Important: If `Configs` is missing or subfields are incomplete, the server returns `InvalidParameter(400)` or `Rule.Config.Malformed`.
      *
-     * - `http_ratelimit`: rate limiting rule
-     *
-     * - `ip_access_rule`: IP access rule
+     * @example
+     * 10000001
+     */
+    configs?: WafRuleConfig[];
+    /**
+     * @remarks
+     * The WAF rule execution phase. This **batch operation supports only** the following two phases. For other phases, use the single-rule operation `UpdateWafRule`:
+     * - `http_anti_scan`: scan protection rules
+     * - `http_bot`: advanced mode bots
      *
-     * - `http_bot`: advanced bot rule
+     * > Note: The `http_anti_scan` and `http_bot` phases **support only batch updates**. The single-rule operation `UpdateWafRule` does not accept these two values. Conversely, other phases such as `http_custom` and `http_whitelist` can be updated only by using the single-rule operation, not this batch operation.
      *
-     * - `http_security_level_rule`: security rule
+     * **Required constraint**: Although this parameter is marked as optional (required: false) in the specification, it is **required** when you call this batch operation. The server cannot determine the target ruleset without the Phase parameter and returns `InvalidParameter(400)` if it is not provided.
      *
      * @example
      * http_anti_scan
@@ -33,7 +35,7 @@ export declare class BatchUpdateWafRulesRequest extends $dara.Model {
     phase?: string;
     /**
      * @remarks
-     * The ID of the WAF ruleset. You can call the [ListWafRulesets](https://help.aliyun.com/document_detail/2878359.html) operation to obtain this ID.
+     * The ID of the WAF ruleset. You can call the [ListWafRulesets](https://help.aliyun.com/document_detail/2878359.html) operation to obtain the ruleset ID.
      *
      * @example
      * 10000001
@@ -41,12 +43,16 @@ export declare class BatchUpdateWafRulesRequest extends $dara.Model {
     rulesetId?: number;
     /**
      * @remarks
-     * The configuration properties that are shared by all rules in this batch update.
+     * The shared configuration for multiple rules. Specifies the common properties shared across multiple rules.
+     *
+     * **Conditionally required**: Although this parameter is marked as optional (required: false) in the specification, it is **required** when `Phase=http_anti_scan`. The server returns `InvalidParameter(400)` if it is not provided.
+     *
+     * **Subfield requirements**: When the phase is `http_anti_scan`, Shared must include the `Name` (rule name), `Expression` (match expression), and `Action` (rule action) shared fields. For other phases, the required subfields of Shared vary depending on the specific phase.
      */
     shared?: WafBatchRuleShared;
     /**
      * @remarks
-     * The ID of the site. You can call the [ListSites](https://help.aliyun.com/document_detail/2850189.html) operation to obtain this ID.
+     * The site ID. You can call the [ListSites](https://help.aliyun.com/document_detail/2850189.html) operation to obtain the site ID.
      *
      * This parameter is required.
      *
@@ -56,7 +62,7 @@ export declare class BatchUpdateWafRulesRequest extends $dara.Model {
     siteId?: number;
     /**
      * @remarks
-     * The version of the site configuration. For sites that have configuration version management enabled, this parameter specifies the version to which the configuration applies. The default value is 0.
+     * The version number of the site configuration. For sites with version management enabled, you can use this parameter to specify the site version on which the configuration takes effect. The default value is 0.
      *
      * @example
      * 0

package/dist/models/BatchUpdateWafRulesRequest.js.map

@@ -1 +1 @@
-{"version":3,"file":"BatchUpdateWafRulesRequest.js","sourceRoot":"","sources":["../../src/models/BatchUpdateWafRulesRequest.ts"],"names":[],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAAA,6CAA6C;AAC7C,6DAA+C;AAC/C,mDAAgD;AAChD,6DAA0D;AAG1D,MAAa,0BAA2B,SAAQ,KAAK,CAAC,KAAK;IA6DzD,MAAM,CAAC,KAAK;QACV,OAAO;YACL,OAAO,EAAE,SAAS;YAClB,KAAK,EAAE,OAAO;YACd,SAAS,EAAE,WAAW;YACtB,MAAM,EAAE,QAAQ;YAChB,MAAM,EAAE,QAAQ;YAChB,WAAW,EAAE,aAAa;SAC3B,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,OAAO,EAAE,EAAE,MAAM,EAAE,OAAO,EAAE,UAAU,EAAE,6BAAa,EAAE;YACvD,KAAK,EAAE,QAAQ;YACf,SAAS,EAAE,QAAQ;YACnB,MAAM,EAAE,uCAAkB;YAC1B,MAAM,EAAE,QAAQ;YAChB,WAAW,EAAE,QAAQ;SACtB,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,IAAG,KAAK,CAAC,OAAO,CAAC,IAAI,CAAC,OAAO,CAAC,EAAE,CAAC;YAC/B,KAAK,CAAC,KAAK,CAAC,aAAa,CAAC,IAAI,CAAC,OAAO,CAAC,CAAC;QAC1C,CAAC;QACD,IAAG,IAAI,CAAC,MAAM,IAAI,OAAQ,IAAI,CAAC,MAAc,CAAC,QAAQ,KAAK,UAAU,EAAE,CAAC;YACrE,IAAI,CAAC,MAAc,CAAC,QAAQ,EAAE,CAAC;QAClC,CAAC;QACD,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AAhGD,gEAgGC"}
+{"version":3,"file":"BatchUpdateWafRulesRequest.js","sourceRoot":"","sources":["../../src/models/BatchUpdateWafRulesRequest.ts"],"names":[],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAAA,6CAA6C;AAC7C,6DAA+C;AAC/C,mDAAgD;AAChD,6DAA0D;AAG1D,MAAa,0BAA2B,SAAQ,KAAK,CAAC,KAAK;IAmEzD,MAAM,CAAC,KAAK;QACV,OAAO;YACL,OAAO,EAAE,SAAS;YAClB,KAAK,EAAE,OAAO;YACd,SAAS,EAAE,WAAW;YACtB,MAAM,EAAE,QAAQ;YAChB,MAAM,EAAE,QAAQ;YAChB,WAAW,EAAE,aAAa;SAC3B,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,OAAO,EAAE,EAAE,MAAM,EAAE,OAAO,EAAE,UAAU,EAAE,6BAAa,EAAE;YACvD,KAAK,EAAE,QAAQ;YACf,SAAS,EAAE,QAAQ;YACnB,MAAM,EAAE,uCAAkB;YAC1B,MAAM,EAAE,QAAQ;YAChB,WAAW,EAAE,QAAQ;SACtB,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,IAAG,KAAK,CAAC,OAAO,CAAC,IAAI,CAAC,OAAO,CAAC,EAAE,CAAC;YAC/B,KAAK,CAAC,KAAK,CAAC,aAAa,CAAC,IAAI,CAAC,OAAO,CAAC,CAAC;QAC1C,CAAC;QACD,IAAG,IAAI,CAAC,MAAM,IAAI,OAAQ,IAAI,CAAC,MAAc,CAAC,QAAQ,KAAK,UAAU,EAAE,CAAC;YACrE,IAAI,CAAC,MAAc,CAAC,QAAQ,EAAE,CAAC;QAClC,CAAC;QACD,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AAtGD,gEAsGC"}

package/dist/models/BatchUpdateWafRulesShrinkRequest.d.ts

@@ -2,28 +2,30 @@ import * as $dara from '@darabonba/typescript';
 export declare class BatchUpdateWafRulesShrinkRequest extends $dara.Model {
     /**
      * @remarks
-     * A list of configurations for individual rules.
-     */
-    configsShrink?: string;
-    /**
-     * @remarks
-     * The WAF rule runtime phase.
+     * The list of rule configurations. Specifies the detailed configuration for each rule.
      *
-     * - `http_whitelist`: whitelist rule
+     * **Required subfields for each phase** (applicable only to the two phases supported by this batch operation):
      *
-     * - `http_custom`: custom rule
+     * - `http_anti_scan`: You must provide `Type` and at least one of `ManagedList` or `RateLimit`.
+     * - `http_bot`: You must provide the advanced mode bots configuration. The subfields are defined in the `WafRuleConfig` data structure.
      *
-     * - `http_managed`: managed rule
+     * > Note: Other phases such as `http_custom` and `http_whitelist` cannot use this batch operation. Use the single-rule operation `UpdateWafRule` instead. The subfield constraints for those phases are described in the single-rule operation documentation.
      *
-     * - `http_anti_scan`: scan protection rule
+     * > Important: If `Configs` is missing or subfields are incomplete, the server returns `InvalidParameter(400)` or `Rule.Config.Malformed`.
      *
-     * - `http_ratelimit`: rate limiting rule
-     *
-     * - `ip_access_rule`: IP access rule
+     * @example
+     * 10000001
+     */
+    configsShrink?: string;
+    /**
+     * @remarks
+     * The WAF rule execution phase. This **batch operation supports only** the following two phases. For other phases, use the single-rule operation `UpdateWafRule`:
+     * - `http_anti_scan`: scan protection rules
+     * - `http_bot`: advanced mode bots
      *
-     * - `http_bot`: advanced bot rule
+     * > Note: The `http_anti_scan` and `http_bot` phases **support only batch updates**. The single-rule operation `UpdateWafRule` does not accept these two values. Conversely, other phases such as `http_custom` and `http_whitelist` can be updated only by using the single-rule operation, not this batch operation.
      *
-     * - `http_security_level_rule`: security rule
+     * **Required constraint**: Although this parameter is marked as optional (required: false) in the specification, it is **required** when you call this batch operation. The server cannot determine the target ruleset without the Phase parameter and returns `InvalidParameter(400)` if it is not provided.
      *
      * @example
      * http_anti_scan
@@ -31,7 +33,7 @@ export declare class BatchUpdateWafRulesShrinkRequest extends $dara.Model {
     phase?: string;
     /**
      * @remarks
-     * The ID of the WAF ruleset. You can call the [ListWafRulesets](https://help.aliyun.com/document_detail/2878359.html) operation to obtain this ID.
+     * The ID of the WAF ruleset. You can call the [ListWafRulesets](https://help.aliyun.com/document_detail/2878359.html) operation to obtain the ruleset ID.
      *
      * @example
      * 10000001
@@ -39,12 +41,16 @@ export declare class BatchUpdateWafRulesShrinkRequest extends $dara.Model {
     rulesetId?: number;
     /**
      * @remarks
-     * The configuration properties that are shared by all rules in this batch update.
+     * The shared configuration for multiple rules. Specifies the common properties shared across multiple rules.
+     *
+     * **Conditionally required**: Although this parameter is marked as optional (required: false) in the specification, it is **required** when `Phase=http_anti_scan`. The server returns `InvalidParameter(400)` if it is not provided.
+     *
+     * **Subfield requirements**: When the phase is `http_anti_scan`, Shared must include the `Name` (rule name), `Expression` (match expression), and `Action` (rule action) shared fields. For other phases, the required subfields of Shared vary depending on the specific phase.
      */
     sharedShrink?: string;
     /**
      * @remarks
-     * The ID of the site. You can call the [ListSites](https://help.aliyun.com/document_detail/2850189.html) operation to obtain this ID.
+     * The site ID. You can call the [ListSites](https://help.aliyun.com/document_detail/2850189.html) operation to obtain the site ID.
      *
      * This parameter is required.
      *
@@ -54,7 +60,7 @@ export declare class BatchUpdateWafRulesShrinkRequest extends $dara.Model {
     siteId?: number;
     /**
      * @remarks
-     * The version of the site configuration. For sites that have configuration version management enabled, this parameter specifies the version to which the configuration applies. The default value is 0.
+     * The version number of the site configuration. For sites with version management enabled, you can use this parameter to specify the site version on which the configuration takes effect. The default value is 0.
      *
      * @example
      * 0

package/dist/models/BatchUpdateWafRulesShrinkRequest.js.map

@@ -1 +1 @@
-{"version":3,"file":"BatchUpdateWafRulesShrinkRequest.js","sourceRoot":"","sources":["../../src/models/BatchUpdateWafRulesShrinkRequest.ts"],"names":[],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAAA,6CAA6C;AAC7C,6DAA+C;AAG/C,MAAa,gCAAiC,SAAQ,KAAK,CAAC,KAAK;IA6D/D,MAAM,CAAC,KAAK;QACV,OAAO;YACL,aAAa,EAAE,SAAS;YACxB,KAAK,EAAE,OAAO;YACd,SAAS,EAAE,WAAW;YACtB,YAAY,EAAE,QAAQ;YACtB,MAAM,EAAE,QAAQ;YAChB,WAAW,EAAE,aAAa;SAC3B,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,aAAa,EAAE,QAAQ;YACvB,KAAK,EAAE,QAAQ;YACf,SAAS,EAAE,QAAQ;YACnB,YAAY,EAAE,QAAQ;YACtB,MAAM,EAAE,QAAQ;YAChB,WAAW,EAAE,QAAQ;SACtB,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AA1FD,4EA0FC"}
+{"version":3,"file":"BatchUpdateWafRulesShrinkRequest.js","sourceRoot":"","sources":["../../src/models/BatchUpdateWafRulesShrinkRequest.ts"],"names":[],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAAA,6CAA6C;AAC7C,6DAA+C;AAG/C,MAAa,gCAAiC,SAAQ,KAAK,CAAC,KAAK;IAmE/D,MAAM,CAAC,KAAK;QACV,OAAO;YACL,aAAa,EAAE,SAAS;YACxB,KAAK,EAAE,OAAO;YACd,SAAS,EAAE,WAAW;YACtB,YAAY,EAAE,QAAQ;YACtB,MAAM,EAAE,QAAQ;YAChB,WAAW,EAAE,aAAa;SAC3B,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,aAAa,EAAE,QAAQ;YACvB,KAAK,EAAE,QAAQ;YACf,SAAS,EAAE,QAAQ;YACnB,YAAY,EAAE,QAAQ;YACtB,MAAM,EAAE,QAAQ;YAChB,WAAW,EAAE,QAAQ;SACtB,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AAhGD,4EAgGC"}

package/dist/models/CommitRoutineStagingCodeRequest.d.ts

@@ -10,7 +10,7 @@ export declare class CommitRoutineStagingCodeRequest extends $dara.Model {
     codeDescription?: string;
     /**
      * @remarks
-     * The deployment environment whose environment variable configuration is used. If you do not specify this parameter, environment variables are not used.
+     * The deployment environment. The environment variable configuration of the specified environment is used. If you do not specify this parameter, environment variables are not used.
      *
      * @example
      * production

package/dist/models/CreateClientCertificateRequest.d.ts

@@ -2,7 +2,7 @@ import * as $dara from '@darabonba/typescript';
 export declare class CreateClientCertificateRequest extends $dara.Model {
     /**
      * @remarks
-     * The certificate signing request (CSR).
+     * The certificate signing request (CSR) content.
      *
      * @example
      * -----BEGIN CERTIFICATE REQUEST-----
@@ -10,7 +10,7 @@ export declare class CreateClientCertificateRequest extends $dara.Model {
     CSR?: string;
     /**
      * @remarks
-     * The type of the private key algorithm.
+     * The private key algorithm type. This parameter is required if CSR is not provided.
      *
      * @example
      * RSA
@@ -18,7 +18,7 @@ export declare class CreateClientCertificateRequest extends $dara.Model {
     pkeyType?: string;
     /**
      * @remarks
-     * The website ID.
+     * The site ID.
      *
      * This parameter is required.
      *
@@ -28,7 +28,7 @@ export declare class CreateClientCertificateRequest extends $dara.Model {
     siteId?: number;
     /**
      * @remarks
-     * The validity period of the certificate. Unit: day.
+     * The validity period of the certificate. Unit: days.
      *
      * This parameter is required.
      *

package/dist/models/CreateClientCertificateResponseBody.d.ts

@@ -2,7 +2,7 @@ import * as $dara from '@darabonba/typescript';
 export declare class CreateClientCertificateResponseBody extends $dara.Model {
     /**
      * @remarks
-     * The ID of the CA certificate.
+     * The CA certificate ID.
      *
      * @example
      * babaded901474b9693acf530e0fb1dbb
@@ -18,7 +18,7 @@ export declare class CreateClientCertificateResponseBody extends $dara.Model {
     certificate?: string;
     /**
      * @remarks
-     * The Common Name of the certificate.
+     * The common name of the certificate.
      *
      * @example
      * www.example.com
@@ -34,7 +34,7 @@ export declare class CreateClientCertificateResponseBody extends $dara.Model {
     fingerprintSha256?: string;
     /**
      * @remarks
-     * The certificate ID on ESA.
+     * The certificate ID.
      *
      * @example
      * babaded901474b9693acf530e0fb1d95
@@ -42,7 +42,7 @@ export declare class CreateClientCertificateResponseBody extends $dara.Model {
     id?: string;
     /**
      * @remarks
-     * The CA that issued the certificate.
+     * The certification authority that issued the certificate.
      *
      * @example
      * ESA CA
@@ -50,7 +50,7 @@ export declare class CreateClientCertificateResponseBody extends $dara.Model {
     issuer?: string;
     /**
      * @remarks
-     * The time when the certificate expires.
+     * The end time of the certificate validity period.
      *
      * @example
      * 2024-12-01T02:12:49Z
@@ -58,7 +58,7 @@ export declare class CreateClientCertificateResponseBody extends $dara.Model {
     notAfter?: string;
     /**
      * @remarks
-     * The time when the certificate takes effect.
+     * The start time of the certificate validity period.
      *
      * @example
      * 2023-12-01T02:12:49Z
@@ -82,7 +82,7 @@ export declare class CreateClientCertificateResponseBody extends $dara.Model {
     requestId?: string;
     /**
      * @remarks
-     * The serial number of the certificate.
+     * The certificate serial number.
      *
      * @example
      * babaded901474b9693acf530e0fb1daa
@@ -98,7 +98,7 @@ export declare class CreateClientCertificateResponseBody extends $dara.Model {
     signatureAlgorithm?: string;
     /**
      * @remarks
-     * The status of the certificate.
+     * The certificate status.
      *
      * @example
      * active
@@ -106,7 +106,7 @@ export declare class CreateClientCertificateResponseBody extends $dara.Model {
     status?: string;
     /**
      * @remarks
-     * The validity period of the certificate. Unit: day.
+     * The validity period of the certificate.
      *
      * @example
      * 365

package/dist/models/CreateListRequest.d.ts

@@ -2,7 +2,7 @@ import * as $dara from '@darabonba/typescript';
 export declare class CreateListRequest extends $dara.Model {
     /**
      * @remarks
-     * The description of the list that you want to create.
+     * The description of the custom list. This parameter provides detailed information about the custom list.
      *
      * @example
      * a custom list
@@ -10,7 +10,7 @@ export declare class CreateListRequest extends $dara.Model {
     description?: string;
     /**
      * @remarks
-     * The items in the list that you want to create.
+     * The list items. This parameter provides the specific item data for the list.
      *
      * @example
      * a custom list
@@ -18,7 +18,7 @@ export declare class CreateListRequest extends $dara.Model {
     items?: string[];
     /**
      * @remarks
-     * The type of the list that you want to create.
+     * The kind of the custom list. This parameter specifies the type of the custom list.
      *
      * @example
      * ip
@@ -26,7 +26,9 @@ export declare class CreateListRequest extends $dara.Model {
     kind?: string;
     /**
      * @remarks
-     * The name of the list that you want to create.
+     * The name of the custom list.
+     *
+     * **Naming rules**: Only letters, digits, and underscores are supported (`^\\w{1,64}$`). The name must be 1 to 64 characters in length.
      *
      * This parameter is required.
      *

package/dist/models/CreateListRequest.js.map

@@ -1 +1 @@
-{"version":3,"file":"CreateListRequest.js","sourceRoot":"","sources":["../../src/models/CreateListRequest.ts"],"names":[],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAAA,6CAA6C;AAC7C,6DAA+C;AAG/C,MAAa,iBAAkB,SAAQ,KAAK,CAAC,KAAK;IAmChD,MAAM,CAAC,KAAK;QACV,OAAO;YACL,WAAW,EAAE,aAAa;YAC1B,KAAK,EAAE,OAAO;YACd,IAAI,EAAE,MAAM;YACZ,IAAI,EAAE,MAAM;SACb,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,WAAW,EAAE,QAAQ;YACrB,KAAK,EAAE,EAAE,MAAM,EAAE,OAAO,EAAE,UAAU,EAAE,QAAQ,EAAE;YAChD,IAAI,EAAE,QAAQ;YACd,IAAI,EAAE,QAAQ;SACf,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,IAAG,KAAK,CAAC,OAAO,CAAC,IAAI,CAAC,KAAK,CAAC,EAAE,CAAC;YAC7B,KAAK,CAAC,KAAK,CAAC,aAAa,CAAC,IAAI,CAAC,KAAK,CAAC,CAAC;QACxC,CAAC;QACD,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AA/DD,8CA+DC"}
+{"version":3,"file":"CreateListRequest.js","sourceRoot":"","sources":["../../src/models/CreateListRequest.ts"],"names":[],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAAA,6CAA6C;AAC7C,6DAA+C;AAG/C,MAAa,iBAAkB,SAAQ,KAAK,CAAC,KAAK;IAqChD,MAAM,CAAC,KAAK;QACV,OAAO;YACL,WAAW,EAAE,aAAa;YAC1B,KAAK,EAAE,OAAO;YACd,IAAI,EAAE,MAAM;YACZ,IAAI,EAAE,MAAM;SACb,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,WAAW,EAAE,QAAQ;YACrB,KAAK,EAAE,EAAE,MAAM,EAAE,OAAO,EAAE,UAAU,EAAE,QAAQ,EAAE;YAChD,IAAI,EAAE,QAAQ;YACd,IAAI,EAAE,QAAQ;SACf,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,IAAG,KAAK,CAAC,OAAO,CAAC,IAAI,CAAC,KAAK,CAAC,EAAE,CAAC;YAC7B,KAAK,CAAC,KAAK,CAAC,aAAa,CAAC,IAAI,CAAC,KAAK,CAAC,CAAC;QACxC,CAAC;QACD,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AAjED,8CAiEC"}

package/dist/models/CreateListResponseBody.d.ts

@@ -2,7 +2,7 @@ import * as $dara from '@darabonba/typescript';
 export declare class CreateListResponseBody extends $dara.Model {
     /**
      * @remarks
-     * The ID of the custom list.[](~~2850217~~)
+     * The ID of the custom list. You can obtain this value by calling the [ListLists](https://help.aliyun.com/document_detail/2850217.html) operation.
      *
      * @example
      * 40000001

package/dist/models/CreateListShrinkRequest.d.ts

@@ -2,7 +2,7 @@ import * as $dara from '@darabonba/typescript';
 export declare class CreateListShrinkRequest extends $dara.Model {
     /**
      * @remarks
-     * The description of the list that you want to create.
+     * The description of the custom list. This parameter provides detailed information about the custom list.
      *
      * @example
      * a custom list
@@ -10,7 +10,7 @@ export declare class CreateListShrinkRequest extends $dara.Model {
     description?: string;
     /**
      * @remarks
-     * The items in the list that you want to create.
+     * The list items. This parameter provides the specific item data for the list.
      *
      * @example
      * a custom list
@@ -18,7 +18,7 @@ export declare class CreateListShrinkRequest extends $dara.Model {
     itemsShrink?: string;
     /**
      * @remarks
-     * The type of the list that you want to create.
+     * The kind of the custom list. This parameter specifies the type of the custom list.
      *
      * @example
      * ip
@@ -26,7 +26,9 @@ export declare class CreateListShrinkRequest extends $dara.Model {
     kind?: string;
     /**
      * @remarks
-     * The name of the list that you want to create.
+     * The name of the custom list.
+     *
+     * **Naming rules**: Only letters, digits, and underscores are supported (`^\\w{1,64}$`). The name must be 1 to 64 characters in length.
      *
      * This parameter is required.
      *

package/dist/models/CreateListShrinkRequest.js.map

@@ -1 +1 @@
-{"version":3,"file":"CreateListShrinkRequest.js","sourceRoot":"","sources":["../../src/models/CreateListShrinkRequest.ts"],"names":[],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAAA,6CAA6C;AAC7C,6DAA+C;AAG/C,MAAa,uBAAwB,SAAQ,KAAK,CAAC,KAAK;IAmCtD,MAAM,CAAC,KAAK;QACV,OAAO;YACL,WAAW,EAAE,aAAa;YAC1B,WAAW,EAAE,OAAO;YACpB,IAAI,EAAE,MAAM;YACZ,IAAI,EAAE,MAAM;SACb,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,WAAW,EAAE,QAAQ;YACrB,WAAW,EAAE,QAAQ;YACrB,IAAI,EAAE,QAAQ;YACd,IAAI,EAAE,QAAQ;SACf,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AA5DD,0DA4DC"}
+{"version":3,"file":"CreateListShrinkRequest.js","sourceRoot":"","sources":["../../src/models/CreateListShrinkRequest.ts"],"names":[],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAAA,6CAA6C;AAC7C,6DAA+C;AAG/C,MAAa,uBAAwB,SAAQ,KAAK,CAAC,KAAK;IAqCtD,MAAM,CAAC,KAAK;QACV,OAAO;YACL,WAAW,EAAE,aAAa;YAC1B,WAAW,EAAE,OAAO;YACpB,IAAI,EAAE,MAAM;YACZ,IAAI,EAAE,MAAM;SACb,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,WAAW,EAAE,QAAQ;YACrB,WAAW,EAAE,QAAQ;YACrB,IAAI,EAAE,QAAQ;YACd,IAAI,EAAE,QAAQ;SACf,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AA9DD,0DA8DC"}