@alicloud/esa20240910 3.3.0 → 3.4.0

package/src/models/GetTransportLayerApplicationResponseBody.ts

@@ -5,14 +5,10 @@ import * as $dara from '@darabonba/typescript';
 export class GetTransportLayerApplicationResponseBodyRules extends $dara.Model {
   /**
    * @remarks
-   * The client IP pass-through mode. Valid values:
-   * 
-   * - **off**: Client IP pass-through is disabled.
-   * 
+   * The client IP pass-through protocol. Valid values:
+   * - **off**: disabled.
    * - **PPv1**: PROXY Protocol v1, which supports client IP pass-through for TCP.
-   * 
-   * - **PPv2**: PROXY Protocol v2, which supports client IP pass-through for both TCP and UDP.
-   * 
+   * - **PPv2**: PROXY Protocol v2, which supports client IP pass-through for TCP and UDP.
    * - **SPP**: Simple Proxy Protocol, which supports client IP pass-through for UDP.
    * 
    * @example
@@ -21,7 +17,7 @@ export class GetTransportLayerApplicationResponseBodyRules extends $dara.Model {
   clientIPPassThroughMode?: string;
   /**
    * @remarks
-   * A comment about the forwarding rule.
+   * The comment for the rule.
    * 
    * @example
    * Test
@@ -31,11 +27,9 @@ export class GetTransportLayerApplicationResponseBodyRules extends $dara.Model {
    * @remarks
    * The edge port. The following formats are supported:
    * 
-   * - A single port, for example, `80`.
-   * 
-   * - A port range, such as `81-85` (ports 81 to 85).
-   * 
-   * - A comma-separated list of ports and port ranges, such as `80,81-85,90`.
+   * - A single port, such as 80.
+   * - A port range, such as 81-85, which represents ports 81, 82, 83, 84, and 85.
+   * - A combination of ports and port ranges separated by commas, such as 80,81-85,90, which represents ports 80, 81, 82, 83, 84, 85, and 90.
    * 
    * @example
    * 80
@@ -43,11 +37,10 @@ export class GetTransportLayerApplicationResponseBodyRules extends $dara.Model {
   edgePort?: string;
   /**
    * @remarks
-   * The protocol for the forwarding rule. Valid values:
+   * The protocol of the forwarding rule. Valid values:
    * 
-   * - **TCP**: For TCP traffic.
-   * 
-   * - **UDP**: For UDP traffic.
+   * - TCP: TCP protocol.
+   * - UDP: UDP protocol.
    * 
    * @example
    * TCP
@@ -63,7 +56,7 @@ export class GetTransportLayerApplicationResponseBodyRules extends $dara.Model {
   ruleId?: number;
   /**
    * @remarks
-   * The origin. This value must be consistent with the specified origin type.
+   * The specific value of the origin server, which must match the origin server type.
    * 
    * @example
    * 1.1.1.1
@@ -71,11 +64,10 @@ export class GetTransportLayerApplicationResponseBodyRules extends $dara.Model {
   source?: string;
   /**
    * @remarks
-   * The origin port. The following formats are supported:
-   * 
-   * - A single port. A single origin port can be mapped to one or more edge ports.
+   * The origin server port. The following formats are supported:
    * 
-   * - A port range. When mapping a range of edge ports to a range of origin ports, both ranges must contain the same number of ports. For example, you cannot map edge ports `90-93` (4 ports) to origin ports `81-85` (5 ports).
+   * - A single port. When the origin server port is a single port, any valid edge port combination is supported.
+   * - A port range. The origin server port can be set to a port range only when the edge port is a port range, and the range size must be the same as the edge port range. For example, if the edge port is 90-93, you cannot set the origin server port to 81-85 because the origin server port range is 5 while the edge port range is 4, which are inconsistent.
    * 
    * @example
    * 80
@@ -83,15 +75,11 @@ export class GetTransportLayerApplicationResponseBodyRules extends $dara.Model {
   sourcePort?: string;
   /**
    * @remarks
-   * The origin type. Valid values:
-   * 
-   * - **ip**: An IP address.
-   * 
-   * - **domain**: A domain name.
-   * 
-   * - **OP**: An origin address pool.
-   * 
-   * - **LB**: A load balancer.
+   * The origin server type. Valid values:
+   * - **ip**: IP address.
+   * - **domain**: domain name.
+   * - **OP**: IPAM pool.
+   * - **LB**: load balancing.
    * 
    * @example
    * domain
@@ -133,7 +121,25 @@ export class GetTransportLayerApplicationResponseBodyRules extends $dara.Model {
 }
 
 export class GetTransportLayerApplicationResponseBodyStaticIpV4List extends $dara.Model {
+  /**
+   * @remarks
+   * The IP address.
+   * 
+   * @example
+   * 1.1.1.2
+   */
   address?: string;
+  /**
+   * @remarks
+   * The status of the IP address. Valid values:
+   * 
+   * - healthy: Healthy.
+   * - unhealthy: Unhealthy.
+   * - unknown: The IP address is being prepared.
+   * 
+   * @example
+   * healthy
+   */
   status?: string;
   static names(): { [key: string]: string } {
     return {
@@ -161,7 +167,7 @@ export class GetTransportLayerApplicationResponseBodyStaticIpV4List extends $dar
 export class GetTransportLayerApplicationResponseBody extends $dara.Model {
   /**
    * @remarks
-   * The ID of the Transport Layer Application.
+   * The Layer 4 application ID.
    * 
    * @example
    * 17099311410****
@@ -169,7 +175,7 @@ export class GetTransportLayerApplicationResponseBody extends $dara.Model {
   applicationId?: number;
   /**
    * @remarks
-   * The CNAME domain name of the Transport Layer Application. This parameter is returned only if the Site was added using the CNAME method.
+   * The CNAME domain name of the Layer 4 acceleration application. This field is non-empty only when the site is connected by using the CNAME method.
    * 
    * @example
    * example.com.ialicdn.com
@@ -177,11 +183,9 @@ export class GetTransportLayerApplicationResponseBody extends $dara.Model {
   cname?: string;
   /**
    * @remarks
-   * Indicates whether network optimization for access from the Chinese mainland is enabled. This feature is disabled by default. Valid values:
-   * 
-   * - **on**: Enabled.
-   * 
-   * - **off**: Disabled.
+   * Specifies whether to enable network access optimization for the Chinese mainland. This feature is disabled by default. Valid values:
+   * - on: Enabled.
+   * - off: Disabled.
    * 
    * @example
    * on
@@ -189,11 +193,10 @@ export class GetTransportLayerApplicationResponseBody extends $dara.Model {
   crossBorderOptimization?: string;
   /**
    * @remarks
-   * Indicates whether the IP Access Rule feature is enabled. If enabled, IP Access Rules in Web Application Firewall (WAF) take effect for the Transport Layer Application. Valid values:
-   * 
-   * - **on**: Enabled.
+   * The IP access rule switch. When enabled, IP access rules in WAF take effect for the Layer 4 application. Valid values:
    * 
-   * - **off**: Disabled.
+   * - on: Enabled.
+   * - off: Disabled.
    * 
    * @example
    * on
@@ -201,7 +204,9 @@ export class GetTransportLayerApplicationResponseBody extends $dara.Model {
   ipAccessRule?: string;
   /**
    * @remarks
-   * Indicates whether IPv6 is enabled.
+   * The IPv6 switch. Valid values:
+   * - on: Enabled.
+   * - off: Disabled.
    * 
    * @example
    * on
@@ -209,12 +214,18 @@ export class GetTransportLayerApplicationResponseBody extends $dara.Model {
   ipv6?: string;
   /**
    * @remarks
-   * Indicates whether keep-alive protection is enabled.
+   * Specifies whether to enable keep-alive protection. This feature is disabled by default. Valid values:
+   * 
+   * - on: Enabled.
+   * - off: Disabled.
+   * 
+   * @example
+   * off
    */
   keepAliveProtection?: string;
   /**
    * @remarks
-   * The domain name of the Transport Layer Application.
+   * The domain name of the Layer 4 application.
    * 
    * @example
    * test.example.com
@@ -222,7 +233,7 @@ export class GetTransportLayerApplicationResponseBody extends $dara.Model {
   recordName?: string;
   /**
    * @remarks
-   * The ID of the request.
+   * The request ID.
    * 
    * @example
    * EB635996-1FD6-5DFD-BA57-27A849599940
@@ -230,12 +241,12 @@ export class GetTransportLayerApplicationResponseBody extends $dara.Model {
   requestId?: string;
   /**
    * @remarks
-   * A list of forwarding rules.
+   * The list of forwarding rules.
    */
   rules?: GetTransportLayerApplicationResponseBodyRules[];
   /**
    * @remarks
-   * The number of forwarding rules in the Transport Layer Application.
+   * The number of forwarding rules in the Layer 4 acceleration application.
    * 
    * @example
    * 1
@@ -243,21 +254,34 @@ export class GetTransportLayerApplicationResponseBody extends $dara.Model {
   rulesCount?: number;
   /**
    * @remarks
-   * The ID of the Site.
+   * The site ID.
    * 
    * @example
    * 123456****
    */
   siteId?: number;
+  /**
+   * @remarks
+   * Specifies whether to enable static IP. This feature is disabled by default. Valid values:
+   * 
+   * - on: Enabled.
+   * - off: Disabled.
+   * 
+   * @example
+   * off
+   */
   staticIp?: string;
+  /**
+   * @remarks
+   * The list of static IPv4 addresses assigned to this Layer 4 application after the static IP feature is enabled.
+   */
   staticIpV4List?: GetTransportLayerApplicationResponseBodyStaticIpV4List[];
   /**
    * @remarks
-   * The status of the Transport Layer Application. Valid values:
-   * 
-   * - **deploying**: The application is deploying. You cannot modify or delete the application in this state.
+   * The Layer 4 application status. Valid values:
    * 
-   * - **active**: The application is active.
+   * - **deploying**: Being deployed. Modifications and deletions are not allowed in this state.
+   * - **active**: Active.
    * 
    * @example
    * active

package/src/models/ListCompressionRulesRequest.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class ListCompressionRulesRequest extends $dara.Model {
   /**
    * @remarks
-   * Configuration ID, which can be obtained by calling the [ListRedirectRules](https://help.aliyun.com/document_detail/2867474.html) interface.
+   * The configuration ID. You can call the [ListRedirectRules](https://help.aliyun.com/document_detail/2867474.html) operation to obtain the configuration ID.
    * 
    * @example
    * 35281609698****
@@ -13,9 +13,9 @@ export class ListCompressionRulesRequest extends $dara.Model {
   configId?: number;
   /**
    * @remarks
-   * Configuration type. Possible values:
-   * - global: Global configuration.
-   * - rule: Rule-based configuration.
+   * The configuration type. Valid values:
+   * - global: global configuration.
+   * - rule: rule configuration.
    * 
    * @example
    * rule
@@ -23,7 +23,7 @@ export class ListCompressionRulesRequest extends $dara.Model {
   configType?: string;
   /**
    * @remarks
-   * Page number.
+   * The page number for a paged query. The value must be greater than or equal to 1.
    * 
    * @example
    * 1
@@ -31,7 +31,7 @@ export class ListCompressionRulesRequest extends $dara.Model {
   pageNumber?: number;
   /**
    * @remarks
-   * Page size.
+   * The number of entries per page for a paged query. Valid values: 1 to 500.
    * 
    * @example
    * 20
@@ -39,7 +39,7 @@ export class ListCompressionRulesRequest extends $dara.Model {
   pageSize?: number;
   /**
    * @remarks
-   * Rule name. This parameter is not required when adding a global configuration.
+   * The rule name. You do not need to set this parameter when adding a global configuration.
    * 
    * @example
    * rule_example
@@ -47,7 +47,7 @@ export class ListCompressionRulesRequest extends $dara.Model {
   ruleName?: string;
   /**
    * @remarks
-   * Site ID, which can be obtained by calling the [ListSites](https://help.aliyun.com/document_detail/2850189.html) interface.
+   * The site ID. You can call the [ListSites](https://help.aliyun.com/document_detail/2850189.html) operation to obtain the site ID.
    * 
    * This parameter is required.
    * 
@@ -57,7 +57,7 @@ export class ListCompressionRulesRequest extends $dara.Model {
   siteId?: number;
   /**
    * @remarks
-   * Version number of the site configuration. For sites with version management enabled, you can use this parameter to specify the effective version of the site configuration, defaulting to version 0.
+   * The version number of the site configuration. For sites with version management enabled, you can use this parameter to specify the site version for which the configuration takes effect. Default value: 0.
    * 
    * @example
    * 0

package/src/models/ListCompressionRulesResponseBody.ts

@@ -5,9 +5,9 @@ import * as $dara from '@darabonba/typescript';
 export class ListCompressionRulesResponseBodyConfigs extends $dara.Model {
   /**
    * @remarks
-   * Brotli compression. Possible values:
-   * - on: Enabled.
-   * - off: Disabled.
+   * Brotli compression. Valid values:
+   * - on: enabled.
+   * - off: disabled.
    * 
    * @example
    * on
@@ -15,7 +15,7 @@ export class ListCompressionRulesResponseBodyConfigs extends $dara.Model {
   brotli?: string;
   /**
    * @remarks
-   * Configuration ID.
+   * The configuration ID.
    * 
    * @example
    * 35281609698****
@@ -23,9 +23,9 @@ export class ListCompressionRulesResponseBodyConfigs extends $dara.Model {
   configId?: number;
   /**
    * @remarks
-   * Configuration type. Possible values:
-   * - global: Global configuration.
-   * - rule: Rule-based configuration.
+   * The configuration type. Valid values:
+   * - global: global configuration.
+   * - rule: rule configuration.
    * 
    * @example
    * rule
@@ -33,9 +33,9 @@ export class ListCompressionRulesResponseBodyConfigs extends $dara.Model {
   configType?: string;
   /**
    * @remarks
-   * Gzip compression. Possible values:
-   * - on: Enabled.
-   * - off: Disabled.
+   * Gzip compression. Valid values:
+   * - on: enabled.
+   * - off: disabled.
    * 
    * @example
    * on
@@ -43,9 +43,9 @@ export class ListCompressionRulesResponseBodyConfigs extends $dara.Model {
   gzip?: string;
   /**
    * @remarks
-   * Rule content, using conditional expressions to match user requests. This parameter is not required when adding a global configuration. There are two usage scenarios:
-   * - Match all incoming requests: Set the value to true
-   * - Match specific requests: Set the value to a custom expression, for example: (http.host eq \\"video.example.com\\")
+   * The rule content, which uses a conditional expression to match user requests. You do not need to set this parameter when adding a global configuration. Two scenarios are supported:
+   * - Match all incoming requests: Set the value to true.
+   * - Match specified requests: Set the value to a custom expression, for example, (http.host eq \\"video.example.com\\").
    * 
    * @example
    * (http.host eq "video.example.com")
@@ -53,9 +53,9 @@ export class ListCompressionRulesResponseBodyConfigs extends $dara.Model {
   rule?: string;
   /**
    * @remarks
-   * Rule switch. This parameter is not required when adding a global configuration. Possible values:
-   * - on: Enabled.
-   * - off: Disabled.
+   * The rule switch. You do not need to set this parameter when adding a global configuration. Valid values:
+   * - on: enabled.
+   * - off: disabled.
    * 
    * @example
    * on
@@ -63,7 +63,7 @@ export class ListCompressionRulesResponseBodyConfigs extends $dara.Model {
   ruleEnable?: string;
   /**
    * @remarks
-   * Rule name. This parameter is not required when adding a global configuration.
+   * The rule name. You do not need to set this parameter when adding a global configuration.
    * 
    * @example
    * rule_example
@@ -71,7 +71,7 @@ export class ListCompressionRulesResponseBodyConfigs extends $dara.Model {
   ruleName?: string;
   /**
    * @remarks
-   * Rule execution order. The smaller the value, the higher the priority.
+   * The rule execution order. A smaller value indicates a higher priority.
    * 
    * @example
    * 1
@@ -79,7 +79,7 @@ export class ListCompressionRulesResponseBodyConfigs extends $dara.Model {
   sequence?: number;
   /**
    * @remarks
-   * Version number of the site configuration. For sites with version management enabled, you can use this parameter to specify the effective version of the site configuration, defaulting to version 0.
+   * The version number of the site configuration. For sites with version management enabled, you can use this parameter to specify the site version for which the configuration takes effect. Default value: 0.
    * 
    * @example
    * 1
@@ -87,7 +87,9 @@ export class ListCompressionRulesResponseBodyConfigs extends $dara.Model {
   siteVersion?: number;
   /**
    * @remarks
-   * Zstd compression. Value range: - on: Enable. - off: Disable.
+   * Zstd compression. Valid values:
+   * - on: enabled.
+   * - off: disabled.
    * 
    * @example
    * on
@@ -135,12 +137,12 @@ export class ListCompressionRulesResponseBodyConfigs extends $dara.Model {
 export class ListCompressionRulesResponseBody extends $dara.Model {
   /**
    * @remarks
-   * List of compression rule configurations.
+   * The list of compression rule configurations.
    */
   configs?: ListCompressionRulesResponseBodyConfigs[];
   /**
    * @remarks
-   * Current page number.
+   * The current page number, which is the same as the PageNumber request parameter.
    * 
    * @example
    * 1
@@ -148,7 +150,7 @@ export class ListCompressionRulesResponseBody extends $dara.Model {
   pageNumber?: number;
   /**
    * @remarks
-   * Page size.
+   * The number of entries per page.
    * 
    * @example
    * 20
@@ -156,7 +158,7 @@ export class ListCompressionRulesResponseBody extends $dara.Model {
   pageSize?: number;
   /**
    * @remarks
-   * Request ID.
+   * The request ID.
    * 
    * @example
    * EEEBE525-F576-1196-8DAF-2D70CA3F4D2F
@@ -164,7 +166,7 @@ export class ListCompressionRulesResponseBody extends $dara.Model {
   requestId?: string;
   /**
    * @remarks
-   * Total number of items.
+   * The total number of entries.
    * 
    * @example
    * 16
@@ -172,7 +174,7 @@ export class ListCompressionRulesResponseBody extends $dara.Model {
   totalCount?: number;
   /**
    * @remarks
-   * Total number of pages.
+   * The total number of pages.
    * 
    * @example
    * 1

package/src/models/ListCustomHostnamesRequest.ts

@@ -25,7 +25,7 @@ export class ListCustomHostnamesRequest extends $dara.Model {
   nameMatchType?: string;
   /**
    * @remarks
-   * The page number, starting from 1. Default value: 1.
+   * The page number for a paged query. The value must be greater than or equal to 1.
    * 
    * @example
    * 1
@@ -33,10 +33,10 @@ export class ListCustomHostnamesRequest extends $dara.Model {
   pageNumber?: number;
   /**
    * @remarks
-   * The number of entries per page. Default value: 100. Maximum value: 500.
+   * The number of entries per page for a paged query. Valid values: 1 to 500.
    * 
    * @example
-   * 100
+   * 500
    */
   pageSize?: number;
   /**

package/src/models/ListCustomHostnamesResponseBody.ts

@@ -13,7 +13,7 @@ export class ListCustomHostnamesResponseBodyHostnames extends $dara.Model {
   certApplyCode?: number;
   /**
    * @remarks
-   * The error description for the free certificate application.
+   * The error message for the free certificate application.
    * 
    * @example
    * canceled
@@ -46,11 +46,11 @@ export class ListCustomHostnamesResponseBodyHostnames extends $dara.Model {
   /**
    * @remarks
    * The certificate status. Valid values:
-   * - **OK**: Normal.
-   * - **Applying**: Being applied.
-   * - **ApplyFailed**: Application failed.
-   * - **Expiring**: About to expire.
-   * - **Expired**: Expired.
+   * - **OK**: normal.
+   * - **Applying**: being applied.
+   * - **ApplyFailed**: application failed.
+   * - **Expiring**: about to expire.
+   * - **Expired**: expired.
    * 
    * @example
    * OK
@@ -58,7 +58,7 @@ export class ListCustomHostnamesResponseBodyHostnames extends $dara.Model {
   certStatus?: string;
   /**
    * @remarks
-   * The TXT name for certificate verification.
+   * The TXT record name for certificate verification.
    * 
    * @example
    * _acme-challenge.custom.site.com
@@ -66,7 +66,7 @@ export class ListCustomHostnamesResponseBodyHostnames extends $dara.Model {
   certTxtKey?: string;
   /**
    * @remarks
-   * The TXT content for certificate verification.
+   * The TXT record content for certificate verification.
    * 
    * @example
    * lcKYad3UQXgrZLvMm_6TBUYKK4xTkGmninV0Mzx4gjM
@@ -86,10 +86,11 @@ export class ListCustomHostnamesResponseBodyHostnames extends $dara.Model {
   /**
    * @remarks
    * The reason why the SaaS domain name is occupied. Valid values:
-   * - **existing_custom_hostname**: Conflicts with an existing SaaS domain name.
-   * - **existing_record**: Conflicts with an existing site record.
-   * - **existing_load_balancer**: Conflicts with an existing load balancing instance.
-   * - **existing_origin_pool**: Conflicts with an existing origin IPAM pool.
+   * - **existing_custom_hostname**: conflicts with an existing SaaS domain name.
+   * - **existing_site**: conflicts with an existing site.
+   * - **existing_record**: conflicts with an existing site record.
+   * - **existing_load_balancer**: conflicts with an existing load balancing instance.
+   * - **existing_origin_pool**: conflicts with an existing origin IPAM pool.
    * 
    * @example
    * existing_custom_hostname
@@ -97,7 +98,7 @@ export class ListCustomHostnamesResponseBodyHostnames extends $dara.Model {
   conflictWith?: string;
   /**
    * @remarks
-   * The time when the SaaS domain name was created, in the ISO 8601 standard in UTC. Format: yyyy-MM-ddTHH:mm:ssZ.
+   * The creation time of the SaaS domain name, in the ISO 8601 standard in UTC. Format: yyyy-MM-ddTHH:mm:ssZ.
    * 
    * @example
    * 2026-04-19T11:15:20Z
@@ -122,11 +123,11 @@ export class ListCustomHostnamesResponseBodyHostnames extends $dara.Model {
   /**
    * @remarks
    * The reason why the SaaS domain name was taken offline. Valid values:
-   * - **expiration_ arrears**: The subscription plan has expired or the account has an overdue payment.
-   * - **internally_disabled**: Disabled by the system.
-   * - **missing_icp**: The domain name does not have an ICP filing.
-   * - **content_violation**: Content violation.
-   * - **proactively_disabled**: You proactively disabled the domain name or the usage cap you configured was reached.
+   * - **expiration_arrears**: the subscription plan expired or the account has an overdue payment.
+   * - **internally_disabled**: disabled by the system.
+   * - **missing_icp**: the domain name does not have an ICP filing.
+   * - **content_violation**: content violation.
+   * - **proactively_disabled**: proactively disabled by you or disabled because the usage cap you configured was reached.
    * 
    * @example
    * missing_icp
@@ -189,7 +190,7 @@ export class ListCustomHostnamesResponseBodyHostnames extends $dara.Model {
   status?: string;
   /**
    * @remarks
-   * The time when the SaaS domain name was last updated, in the ISO 8601 standard in UTC. Format: yyyy-MM-ddTHH:mm:ssZ.
+   * The update time of the SaaS domain name, in the ISO 8601 standard in UTC. Format: yyyy-MM-ddTHH:mm:ssZ.
    * 
    * @example
    * 2026-04-19T11:15:20Z
@@ -197,7 +198,7 @@ export class ListCustomHostnamesResponseBodyHostnames extends $dara.Model {
   updateTime?: string;
   /**
    * @remarks
-   * The TXT content for domain name verification.
+   * The TXT record content for domain name verification.
    * 
    * @example
    * verify_16ab7f4d389d4dff6655f995c6a997bd
@@ -205,7 +206,7 @@ export class ListCustomHostnamesResponseBodyHostnames extends $dara.Model {
   verifyCode?: string;
   /**
    * @remarks
-   * The TXT name for domain name verification.
+   * The TXT record name for domain name verification.
    * 
    * @example
    * _esa_custom_hostname.custom.site.com
@@ -279,12 +280,12 @@ export class ListCustomHostnamesResponseBodyHostnames extends $dara.Model {
 export class ListCustomHostnamesResponseBody extends $dara.Model {
   /**
    * @remarks
-   * The list of SaaS domain names.
+   * The list of SaaS domain names returned.
    */
   hostnames?: ListCustomHostnamesResponseBodyHostnames[];
   /**
    * @remarks
-   * The page number.
+   * The current page number. This value is the same as the PageNumber request parameter.
    * 
    * @example
    * 1
@@ -300,7 +301,7 @@ export class ListCustomHostnamesResponseBody extends $dara.Model {
   pageSize?: number;
   /**
    * @remarks
-   * The request ID, which is a unique identifier generated by Alibaba Cloud for this request.
+   * The request ID, which is a unique identifier generated by Alibaba Cloud for the request.
    * 
    * @example
    * 04F0F334-1335-436C-A1D7-6C044FE73368