@alicloud/ecs20140526 7.8.5 → 7.8.6

package/src/models/CreateDiskRequest.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class CreateDiskRequestArn extends $dara.Model {
   /**
    * @remarks
-   * > This parameter is not yet available.
+   * > This parameter is not publicly available.
    * 
    * @example
    * 1000000000
@@ -13,7 +13,7 @@ export class CreateDiskRequestArn extends $dara.Model {
   assumeRoleFor?: number;
   /**
    * @remarks
-   * > This parameter is not yet available.
+   * > This parameter is not publicly available.
    * 
    * @example
    * hide
@@ -21,7 +21,7 @@ export class CreateDiskRequestArn extends $dara.Model {
   roleType?: string;
   /**
    * @remarks
-   * > This parameter is not yet available.
+   * > This parameter is not publicly available.
    * 
    * @example
    * hide
@@ -55,9 +55,7 @@ export class CreateDiskRequestArn extends $dara.Model {
 export class CreateDiskRequestTag extends $dara.Model {
   /**
    * @remarks
-   * The tag key of the disk.
-   * 
-   * > For better code compatibility, we recommend that you use the `Tag.N.Key` parameter.
+   * The tag key of the disk. Valid values of N: 1 to 20. Once a Tag.N.Key value is specified, it cannot be an empty string. It supports up to 128 characters and cannot start with `aliyun` or `acs:`, and cannot contain `http://` or `https://`.
    * 
    * @example
    * TestKey
@@ -65,7 +63,7 @@ export class CreateDiskRequestTag extends $dara.Model {
   key?: string;
   /**
    * @remarks
-   * The tag value of the disk. The value of N ranges from 1 to 20. If you specify `Tag.N.Value`, the value can be an empty string. The value can be up to 128 characters in length and cannot contain `http://` or `https://`.
+   * The tag value of the disk. Valid values of N: 1 to 20. Once a Tag.N.Value value is specified, it can be an empty string. It supports up to 128 characters and cannot contain `http://` or `https://`.
    * 
    * @example
    * TestValue
@@ -97,7 +95,7 @@ export class CreateDiskRequestTag extends $dara.Model {
 export class CreateDiskRequest extends $dara.Model {
   /**
    * @remarks
-   * This parameter is not yet available.
+   * This parameter is not publicly available.
    * 
    * @example
    * hide
@@ -105,18 +103,17 @@ export class CreateDiskRequest extends $dara.Model {
   advancedFeatures?: string;
   /**
    * @remarks
-   * > This parameter is not yet available.
+   * > This parameter is not publicly available.
    */
   arn?: CreateDiskRequestArn[];
   /**
    * @remarks
-   * Specifies whether to enable performance bursting. Valid values:
-   * 
-   * - true
+   * Specifies whether to enable burst (performance bursting). Valid values:
    * 
-   * - false
+   * - true: enables burst.
+   * - false: disables burst.
    * 
-   * > This parameter is available only for ESSD AutoPL disks (`cloud_auto`). For more information, see [ESSD AutoPL disks](https://help.aliyun.com/document_detail/368372.html).
+   * > This parameter is supported only when `DiskCategory` is set to `cloud_auto`. For more information, see [ESSD AutoPL disks](https://help.aliyun.com/document_detail/368372.html).
    * 
    * @example
    * false
@@ -124,7 +121,7 @@ export class CreateDiskRequest extends $dara.Model {
   burstingEnabled?: boolean;
   /**
    * @remarks
-   * A client-generated, unique, case-sensitive token that you can use to ensure the idempotency of the request. **ClientToken** can contain only ASCII characters and cannot exceed 64 characters in length. For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
+   * Ensures the idempotency of the request. Generate a parameter value from your client to ensure uniqueness across different requests. **ClientToken** only supports ASCII characters and cannot exceed 64 characters. For more information, see [How to ensure idempotency](https://help.aliyun.com/document_detail/25693.html).
    * 
    * @example
    * 123e4567-e89b-12d3-a456-426655440000
@@ -132,7 +129,7 @@ export class CreateDiskRequest extends $dara.Model {
   clientToken?: string;
   /**
    * @remarks
-   * The description of the disk. The description must be 2 to 256 characters in length and cannot start with `http://` or `https://`.
+   * The disk description. The description must be 2 to 256 characters in length and cannot start with `http://` or `https://`.
    * 
    * Default value: empty.
    * 
@@ -144,25 +141,17 @@ export class CreateDiskRequest extends $dara.Model {
    * @remarks
    * The category of the data disk. Valid values:
    * 
-   * - `cloud`: basic disk
-   * 
-   * - `cloud_efficiency`: ultra disk
-   * 
-   * - `cloud_ssd`: standard SSD
-   * 
-   * - `cloud_essd`: ESSD
-   * 
-   * - `cloud_auto`: ESSD AutoPL disk
-   * 
-   * - `cloud_essd_entry`: ESSD Entry disk
-   * 
-   * - `cloud_regional_disk_auto`: ESSD zone-redundant disk
-   * 
-   * - `elastic_ephemeral_disk_standard`: Elastic Ephemeral Disk - Standard
-   * 
-   * - `elastic_ephemeral_disk_premium`: Elastic Ephemeral Disk - Premium
+   * - cloud: basic disk.
+   * - cloud_efficiency: ultra disk.
+   * - cloud_ssd: standard SSD.
+   * - cloud_essd: ESSD.
+   * - cloud_auto: ESSD AutoPL disk.
+   * - cloud_essd_entry: ESSD Entry disk.
+   * - cloud_regional_disk_auto: ESSD zone-redundant disk.
+   * - elastic_ephemeral_disk_standard: elastic ephemeral disk - standard.
+   * - elastic_ephemeral_disk_premium: elastic ephemeral disk - premium.
    * 
-   * Default value: `cloud`.
+   * Default value: cloud.
    * 
    * @example
    * cloud_ssd
@@ -170,7 +159,7 @@ export class CreateDiskRequest extends $dara.Model {
   diskCategory?: string;
   /**
    * @remarks
-   * The name of the disk. The name must be 2 to 128 characters in length. It must start with a letter as defined by Unicode and can contain letters (including English and Chinese characters), digits (0-9), colons (:), underscores (_), periods (.), and hyphens (-).
+   * The disk name. The name must be 2 to 128 characters in length and can contain Unicode letters (including English and Chinese characters) and ASCII digits (0-9). It can contain colons (:), underscores (_), periods (.), or hyphens (-). It must start with a Unicode letter.
    * 
    * Default value: empty.
    * 
@@ -180,7 +169,7 @@ export class CreateDiskRequest extends $dara.Model {
   diskName?: string;
   /**
    * @remarks
-   * This parameter is not yet available.
+   * This parameter is not publicly available.
    * 
    * @example
    * hide
@@ -190,9 +179,8 @@ export class CreateDiskRequest extends $dara.Model {
    * @remarks
    * Specifies whether to encrypt the disk. Valid values:
    * 
-   * - true
-   * 
-   * - false
+   * - true: encrypts the disk.
+   * - false: does not encrypt the disk.
    * 
    * Default value: false.
    * 
@@ -202,13 +190,12 @@ export class CreateDiskRequest extends $dara.Model {
   encrypted?: boolean;
   /**
    * @remarks
-   * Creates a subscription disk and automatically attaches it to the specified subscription instance.
-   * 
-   * - If you set this parameter, the `ResourceGroupId`, `Tag.N.Key`, `Tag.N.Value`, `ClientToken`, and `KMSKeyId` parameters are ignored.
+   * Creates a subscription disk and automatically attaches it to the specified subscription instance (InstanceId).
    * 
-   * - You cannot specify both `ZoneId` and `InstanceId`.
+   * - After you set the instance ID, the ResourceGroupId, Tag.N.Key, Tag.N.Value, ClientToken, and KMSKeyId parameters that you set are ignored.
+   * - You cannot specify both ZoneId and InstanceId.
    * 
-   * Default value: empty. An empty value indicates that you are creating a pay-as-you-go disk. The disk\\"s location is determined by `RegionId` and `ZoneId`.
+   * Default value: empty, which means a pay-as-you-go disk is created. The location of the disk is determined by RegionId and ZoneId.
    * 
    * @example
    * i-bp18pnlg1ds9rky4****
@@ -216,17 +203,13 @@ export class CreateDiskRequest extends $dara.Model {
   instanceId?: string;
   /**
    * @remarks
-   * The ID of the KMS key to use for the disk.
-   * 
-   * > If `Encrypted` is set to true and you do not specify `KMSKeyId`, a default key is used for encryption. The `KMSKeyId` is returned in the response after the instance is created.
-   * >
-   * > - - If the disk is created from an unshared encrypted snapshot, the encryption key used by that snapshot is used by default.
-   * >
-   * > - - If the disk is created from a shared encrypted snapshot, the service key is used by default.
-   * >
-   * > - - If the disk is created in a region with account-level default encryption enabled, the specified account-level key is used by default.
-   * >
-   * > - - In other cases, the service key is used by default.
+   * The KMS key ID used by the disk.
+   * 
+   * > If Encrypted is set to true and KMSKeyId is not specified, the default key is used for encryption, and the KMSKeyId value is returned after the instance is successfully created.
+   * > - - Disk created from a non-shared encrypted snapshot: The encryption key used by the snapshot is used by default.
+   * > - - Disk created from a shared encrypted snapshot: The service key is used by default.
+   * > - - Disk created in a region where account-level default encryption for block storage is enabled: The specified account-level key is used by default.
+   * > - - Other cases: The service key is used by default.
    * 
    * @example
    * 0e478b7a-4262-4802-b8cb-00d3fb40826X
@@ -236,13 +219,12 @@ export class CreateDiskRequest extends $dara.Model {
    * @remarks
    * Specifies whether to enable the multi-attach feature. Valid values:
    * 
-   * - Disabled: The feature is disabled.
-   * 
-   * - Enabled: The feature is enabled. Currently, only ESSDs support setting this parameter to `Enabled`.
+   * - Disabled: disables the feature.
+   * - Enabled: enables the feature. Currently, only ESSDs support setting this to `Enabled`.
    * 
    * Default value: Disabled.
    * 
-   * > Disks with the multi-attach feature enabled can only be billed on a pay-as-you-go basis. Therefore, you cannot set the `InstanceId` parameter when `MultiAttach` is `Enabled`. After you create the disk, you can call [AttachDisk](https://help.aliyun.com/document_detail/25515.html) to attach it. Note that a multi-attach disk can be attached only as a data disk.
+   * > Disks with the multi-attach feature enabled only support the pay-as-you-go billing method. Therefore, when `MultiAttach=Enabled`, you cannot set the `InstanceId` parameter. You can call [AttachDisk](https://help.aliyun.com/document_detail/25515.html) to attach the disk after creation, but note that disks with multi-attach enabled can only be attached as data disks.
    * 
    * @example
    * Disabled
@@ -252,19 +234,16 @@ export class CreateDiskRequest extends $dara.Model {
   ownerId?: number;
   /**
    * @remarks
-   * The performance level of the ESSD. Valid values:
-   * 
-   * - PL0: A single disk can deliver up to 10,000 random read/write IOPS.
+   * Sets the performance level of the disk when creating an ESSD. Valid values:
    * 
-   * - PL1: A single disk can deliver up to 50,000 random read/write IOPS.
-   * 
-   * - PL2: A single disk can deliver up to 100,000 random read/write IOPS.
-   * 
-   * - PL3: A single disk can deliver up to 1,000,000 random read/write IOPS.
+   * - PL0: maximum random read/write IOPS of 10,000 per disk.
+   * - PL1: maximum random read/write IOPS of 50,000 per disk.
+   * - PL2: maximum random read/write IOPS of 100,000 per disk.
+   * - PL3: maximum random read/write IOPS of 1,000,000 per disk.
    * 
    * Default value: PL1.
    * 
-   * For more information about how to choose an ESSD performance level, see [ESSDs](https://help.aliyun.com/document_detail/122389.html).
+   * For information about how to select an ESSD performance level, see [ESSDs](https://help.aliyun.com/document_detail/122389.html).
    * 
    * @example
    * PL1
@@ -272,15 +251,19 @@ export class CreateDiskRequest extends $dara.Model {
   performanceLevel?: string;
   /**
    * @remarks
-   * The provisioned read/write IOPS of a single ESSD AutoPL disk. Valid values:
+   * The provisioned read/write IOPS of the ESSD AutoPL disk (per disk). Possible values:
+   * 
+   * - Capacity (GiB) <= 3: provisioned performance cannot be set.
+   * 
+   * - Capacity (GiB) >= 4: [0, min{(1,000
    * 
-   * - Capacity <= 3 GiB: You cannot set provisioned performance.
+   *  IOPS/GiB * capacity - baseline IOPS), 50,000}]
    * 
-   * - Capacity >= 4 GiB: 0 to min(1,000 IOPS/GiB × Capacity - Baseline IOPS, 50,000).
    * 
-   * Baseline IOPS = max(min(1,800 + 50 × Capacity, 50,000), 3,000).
+   * Baseline performance = max{min{1,800 + 50 * capacity, 50,000}, 3,000}.
    * 
-   * > This parameter is available only for ESSD AutoPL disks (`cloud_auto`). For more information, see [ESSD AutoPL disks](https://help.aliyun.com/document_detail/368372.html).
+   * 
+   * > This parameter is supported only when `DiskCategory` = `cloud_auto`. For more information, see [ESSD AutoPL disks](https://help.aliyun.com/document_detail/368372.html).
    * 
    * @example
    * 40000
@@ -288,7 +271,7 @@ export class CreateDiskRequest extends $dara.Model {
   provisionedIops?: number;
   /**
    * @remarks
-   * The ID of the region in which to create the disk. You can call [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) to query the most recent region list.
+   * The region ID. You can call [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) to view the latest list of Alibaba Cloud regions.
    * 
    * This parameter is required.
    * 
@@ -298,7 +281,7 @@ export class CreateDiskRequest extends $dara.Model {
   regionId?: string;
   /**
    * @remarks
-   * The ID of the resource group to which the disk belongs.
+   * The ID of the enterprise resource group to which the disk belongs.
    * 
    * @example
    * rg-bp67acfmxazb4p****
@@ -308,39 +291,26 @@ export class CreateDiskRequest extends $dara.Model {
   resourceOwnerId?: number;
   /**
    * @remarks
-   * The capacity of the disk, in GiB. You must specify a value for this parameter. Value range:
-   * 
-   * - `cloud`: 5 to 2,000
-   * 
-   * - `cloud_efficiency`: 20 to 32,768
-   * 
-   * - `cloud_ssd`: 20 to 32,768
-   * 
-   * - `PerformanceLevel`
-   * 
-   *   - PL0: 1 to 65,536
-   * 
-   *   - PL1: 20 to 65,536
-   * 
-   *   - PL2: 461 to 65,536
-   * 
-   *   - PL3: 1,261 to 65,536
-   * 
-   * - `cloud_auto`: 1 to 65,536
-   * 
-   * - `cloud_essd_entry`: 10 to 32,768
-   * 
-   * - `cloud_regional_disk_auto`: 10 to 65,536
-   * 
-   * - `elastic_ephemeral_disk_standard`: 64 to 8,192
-   * 
-   * - `elastic_ephemeral_disk_premium`: 64 to 8,192
-   * 
-   * If you specify `SnapshotId`, the following limits apply to `SnapshotId` and `Size`:
-   * 
-   * - If the snapshot capacity is greater than the specified `Size`, the actual disk size is the snapshot capacity.
-   * 
-   * - If the snapshot capacity is smaller than the specified `Size`, the actual disk size is the specified `Size`.
+   * The capacity size. Unit: GiB. You must specify a value for this parameter. Valid values:
+   * 
+   * -   cloud: 5 to 2,000.
+   * -   cloud_efficiency: 20 to 32,768.
+   * -   cloud_ssd: 20 to 32,768.
+   * -   cloud_essd: The valid value range depends on the value of `PerformanceLevel`.
+   *     - PL0: 1 to 65,536.
+   *     - PL1: 20 to 65,536.
+   *     - PL2: 461 to 65,536.
+   *     - PL3: 1,261 to 65,536.
+   * - cloud_auto: 1 to 65,536.
+   * - cloud_essd_entry: 10 to 32,768.
+   * - cloud_regional_disk_auto: 10 to 65,536.
+   * - elastic_ephemeral_disk_standard: 64 to 8,192.
+   * - elastic_ephemeral_disk_premium: 64 to 8,192.
+   * 
+   * If you specify the `SnapshotId` parameter, the `SnapshotId` and `Size` parameters have the following restrictions:
+   * 
+   * - If the snapshot capacity corresponding to the `SnapshotId` parameter is greater than the specified `Size` parameter value, the actual size of the created disk equals the size of the specified snapshot.
+   * - If the snapshot capacity corresponding to the `SnapshotId` parameter is less than the specified `Size` parameter value, the actual size of the created disk equals the specified `Size` parameter value.
    * 
    * @example
    * 2000
@@ -348,15 +318,13 @@ export class CreateDiskRequest extends $dara.Model {
   size?: number;
   /**
    * @remarks
-   * The ID of the snapshot used to create the disk. Snapshots created on or before July 15, 2013 cannot be used to create disks.
-   * 
-   * The `SnapshotId` and `Size` parameters have the following limits:
-   * 
-   * - If the snapshot capacity is greater than the specified `Size`, the actual disk size is the snapshot capacity.
+   * The snapshot ID used to create the disk. Snapshots created on or before July 15, 2013 cannot be used to create disks.
    * 
-   * - If the snapshot capacity is smaller than the specified `Size`, the actual disk size is the specified `Size`.
+   * The `SnapshotId` and `Size` parameters have the following restrictions:
    * 
-   * - You cannot use snapshots to create Elastic Ephemeral Disks.
+   * - If the snapshot capacity corresponding to the `SnapshotId` parameter is greater than the specified `Size` parameter value, the actual size of the created disk equals the size of the specified snapshot.
+   * - If the snapshot capacity corresponding to the `SnapshotId` parameter is less than the specified `Size` parameter value, the actual size of the created disk equals the specified `Size` parameter value.
+   * - Creating elastic ephemeral disks from snapshots is not supported.
    * 
    * @example
    * s-bp67acfmxazb4p****
@@ -364,9 +332,9 @@ export class CreateDiskRequest extends $dara.Model {
   snapshotId?: string;
   /**
    * @remarks
-   * The ID of the dedicated block storage cluster. If you need to create a disk in a specific dedicated block storage cluster, specify this parameter.
+   * The dedicated block storage cluster ID. If you need to create a disk in a specified dedicated block storage cluster, specify this parameter.
    * 
-   * > You can specify either storage set parameters (`StorageSetId` and `StorageSetPartitionNumber`) or the dedicated block storage cluster parameter (`StorageClusterId`), but not both. The request fails if you specify parameters for both.
+   * > Storage set parameters (`StorageSetId`, `StorageSetPartitionNumber`) and dedicated block storage cluster parameter (`StorageClusterId`) are mutually exclusive. If both are set, the API call will fail.
    * 
    * @example
    * dbsc-j5e1sf2vaf5he8m2****
@@ -374,9 +342,9 @@ export class CreateDiskRequest extends $dara.Model {
   storageClusterId?: string;
   /**
    * @remarks
-   * The ID of the storage set.
+   * The storage set ID.
    * 
-   * > You can specify either storage set parameters (`StorageSetId` and `StorageSetPartitionNumber`) or the dedicated block storage cluster parameter (`StorageClusterId`), but not both. The request fails if you specify parameters for both.
+   * > Storage set parameters (`StorageSetId`, `StorageSetPartitionNumber`) and dedicated block storage cluster parameter (`StorageClusterId`) are mutually exclusive. If both are set, the API call will fail.
    * 
    * @example
    * ss-bp67acfmxazb4p****
@@ -384,7 +352,7 @@ export class CreateDiskRequest extends $dara.Model {
   storageSetId?: string;
   /**
    * @remarks
-   * The number of partitions in the storage set. The value must be greater than or equal to 2 and cannot exceed the quota returned by the [DescribeAccountAttributes](https://help.aliyun.com/document_detail/73772.html) operation.
+   * The number of storage set partitions. Valid values: greater than or equal to 2, and cannot exceed the quota limit displayed after calling [DescribeAccountAttributes](https://help.aliyun.com/document_detail/73772.html).
    * 
    * Default value: 2.
    * 
@@ -394,18 +362,18 @@ export class CreateDiskRequest extends $dara.Model {
   storageSetPartitionNumber?: number;
   /**
    * @remarks
-   * A list of tags for the disk.
+   * The list of tag information for the disk.
    */
   tag?: CreateDiskRequestTag[];
   /**
    * @remarks
-   * The ID of the zone in which to create the pay-as-you-go disk.
+   * Creates a pay-as-you-go disk in the specified zone.
    * 
-   * - If you do not set `InstanceId`, this parameter is required.
+   * - If you do not set InstanceId, ZoneId is required.
+   * - You cannot specify both ZoneId and InstanceId.
    * 
-   * - You cannot specify both `ZoneId` and `InstanceId`.
    * 
-   * > ESSD zone-redundant disks (`cloud_regional_disk_auto`) do not require a zone ID.
+   * > Disks of the `cloud_regional_disk_auto` type do not require ZoneId to be set.
    * 
    * @example
    * cn-hangzhou-g

package/src/models/CreateDiskResponseBody.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class CreateDiskResponseBody extends $dara.Model {
   /**
    * @remarks
-   * The ID of the disk.
+   * The disk ID.
    * 
    * @example
    * d-bp131n0q38u3a4zi****
@@ -13,9 +13,9 @@ export class CreateDiskResponseBody extends $dara.Model {
   diskId?: string;
   /**
    * @remarks
-   * The ID of the order.
+   * The generated order ID.
    * 
-   * > This parameter is returned only when you create a subscription disk.
+   * > The order ID is returned only when a subscription disk is created.
    * 
    * @example
    * 20413515388****
@@ -23,7 +23,7 @@ export class CreateDiskResponseBody extends $dara.Model {
   orderId?: string;
   /**
    * @remarks
-   * The ID of the request.
+   * The request ID.
    * 
    * @example
    * 473469C7-AA6F-4DC5-B3DB-A3DC0DE3****

package/src/models/CreateHaVipRequest.ts

@@ -3,27 +3,13 @@ import * as $dara from '@darabonba/typescript';
 
 
 export class CreateHaVipRequest extends $dara.Model {
-  /**
-   * @remarks
-   * A client-generated token that ensures the idempotence of the request. The token must be unique across requests, contain only ASCII characters, and be no more than 64 characters long.
-   */
   clientToken?: string;
-  /**
-   * @remarks
-   * The description of the HaVip. The description must be 2 to 256 characters long and cannot start with `http://` or `https://`.
-   */
   description?: string;
-  /**
-   * @remarks
-   * The IP address of the HaVip. The IP address must be available and fall within the CIDR block of the vSwitch. If this parameter is not specified, an available IP address is randomly allocated from the CIDR block of the vSwitch.
-   */
   ipAddress?: string;
   ownerAccount?: string;
   ownerId?: number;
   /**
    * @remarks
-   * The ID of the region in which to create the HaVip. You can call the operation to get the latest list of regions.
-   * 
    * This parameter is required.
    */
   regionId?: string;
@@ -31,8 +17,6 @@ export class CreateHaVipRequest extends $dara.Model {
   resourceOwnerId?: number;
   /**
    * @remarks
-   * The ID of the vSwitch to which the HaVip belongs.
-   * 
    * This parameter is required.
    */
   vSwitchId?: string;

package/src/models/CreateHaVipResponseBody.ts

@@ -3,15 +3,7 @@ import * as $dara from '@darabonba/typescript';
 
 
 export class CreateHaVipResponseBody extends $dara.Model {
-  /**
-   * @remarks
-   * The ID of the HaVip.
-   */
   haVipId?: string;
-  /**
-   * @remarks
-   * The request ID.
-   */
   requestId?: string;
   static names(): { [key: string]: string } {
     return {

package/src/models/CreateImageComponentRequest.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class CreateImageComponentRequestTag extends $dara.Model {
   /**
    * @remarks
-   * The key of tag N. Valid values of N: 1 to 20. The tag key cannot be an empty string. The tag key can be up to 128 characters in length and cannot contain [http:// or https://](http://https://%E3%80%82). The tag key cannot start with acs: or aliyun.
+   * The key of the tag. Valid values of N: 1 to 20. The tag key cannot be an empty string. The tag key can be up to 128 characters in length and cannot start with aliyun or acs:. The tag key cannot contain http:// or https://.
    * 
    * @example
    * TestKey
@@ -13,7 +13,7 @@ export class CreateImageComponentRequestTag extends $dara.Model {
   key?: string;
   /**
    * @remarks
-   * The value of tag N. Valid values of N: 1 to 20. The tag value can be an empty string. The tag value can be up to 128 characters in length and cannot contain [http:// or https://](http://https://%E3%80%82). The tag value cannot start with acs:.
+   * The value of the tag. Valid values of N: 1 to 20. The tag value can be an empty string. The tag value can be up to 128 characters in length and cannot start with acs:. The tag value cannot contain http:// or https://.
    * 
    * @example
    * TestValue
@@ -45,7 +45,7 @@ export class CreateImageComponentRequestTag extends $dara.Model {
 export class CreateImageComponentRequest extends $dara.Model {
   /**
    * @remarks
-   * The client token that is used to ensure the idempotency of the request. You can use the client to generate the token, but you must make sure that the token is unique among different requests. The **token** can contain only ASCII characters and cannot exceed 64 characters in length. For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
+   * The client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but make sure that the token is unique among different requests. The value of **ClientToken** can contain only ASCII characters and cannot exceed 64 characters in length. For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
    * 
    * @example
    * 123e4567-e89b-12d3-a456-426655440000
@@ -53,17 +53,14 @@ export class CreateImageComponentRequest extends $dara.Model {
   clientToken?: string;
   /**
    * @remarks
-   * The type of the image component. Only image building components and image test components are supported.
+   * The component type. Image build components and test components are supported.
    * 
    * Valid values:
-   * 
    * - Build
-   * 
    * - Test
    * 
    * Default value: Build.
-   * 
-   * > Image building components can be used only in image building templates. Image test components can be used only in image test templates.
+   * > Build components can be used only in build templates. Test components can be used only in test templates.
    * 
    * @example
    * Build
@@ -71,9 +68,9 @@ export class CreateImageComponentRequest extends $dara.Model {
   componentType?: string;
   /**
    * @remarks
-   * The version number of the image component, which is used together with the name of the image component. The version number is in the \\<major>.\\<minor>.\\<patch> format. Set \\<major>, \\<minor>, and \\<patch> to non-negative integers.
+   * The version number of the component, which is used together with the component name. The format is major.minor.patch, and all values are non-negative integers.
    * 
-   * Default value: (x + 1).0.0, in which x is the maximum major version number of the image component.
+   * Default value: (x+1).0.0, where x is the current maximum major version number of the component.
    * 
    * @example
    * 1.0.0
@@ -81,7 +78,7 @@ export class CreateImageComponentRequest extends $dara.Model {
   componentVersion?: string;
   /**
    * @remarks
-   * The content of the image component. The image component consists of multiple commands. The command content cannot exceed 16 KB in size. For information about the commands supported by Image Builder and the formats of the commands, see [Commands supported by Image Builder](https://help.aliyun.com/document_detail/200206.html).
+   * The component content, which consists of multiple commands. The content cannot exceed 16 KB. For more information about supported commands and command formats, see [Commands supported by Image Builder](https://help.aliyun.com/document_detail/200206.html).
    * 
    * @example
    * Tasks:
@@ -93,7 +90,7 @@ export class CreateImageComponentRequest extends $dara.Model {
   content?: string;
   /**
    * @remarks
-   * The description. The description must be 2 to 256 characters in length and cannot start with [http:// or https://](http://https://%E3%80%82).
+   * The description. The description must be 2 to 256 characters in length and cannot start with http:// or https://.
    * 
    * @example
    * This is description.
@@ -101,9 +98,9 @@ export class CreateImageComponentRequest extends $dara.Model {
   description?: string;
   /**
    * @remarks
-   * The name of the image component. The name must be 2 to 128 characters in length. The name must start with a letter and cannot start with http\\:// or https\\://. The name can contain letters, digits, colons (:), underscores (_), periods (.), and hyphens (-).
+   * The component name. The name must be 2 to 128 characters in length and must start with a letter or a Chinese character. The name cannot start with http:// or https://. The name can contain letters, Chinese characters, digits, colons (:), underscores (_), periods (.), and hyphens (-).
    * 
-   * > If you do not specify `Name`, the return value of `ImageComponentId` is used.
+   * > If you do not specify Name, the ImageComponentId return value is used by default.
    * 
    * @example
    * testComponent
@@ -113,7 +110,7 @@ export class CreateImageComponentRequest extends $dara.Model {
   ownerId?: number;
   /**
    * @remarks
-   * The region ID. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent region list.
+   * The region ID. You can call [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) to query the most recent list of Alibaba Cloud regions.
    * 
    * This parameter is required.
    * 
@@ -123,7 +120,7 @@ export class CreateImageComponentRequest extends $dara.Model {
   regionId?: string;
   /**
    * @remarks
-   * The ID of the resource group.
+   * The ID of the enterprise resource group.
    * 
    * @example
    * rg-bp67acfmxazb4p****
@@ -133,12 +130,10 @@ export class CreateImageComponentRequest extends $dara.Model {
   resourceOwnerId?: number;
   /**
    * @remarks
-   * The type of the operating system supported by the image component.
+   * The operating system supported by the component.
    * 
    * Valid values:
-   * 
    * - Linux
-   * 
    * - Windows
    * 
    * Default value: Linux.