@alicloud/ecs20140526 7.8.4 → 7.8.5

package/src/models/ModifySecurityGroupRuleRequest.ts

@@ -33,33 +33,43 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
    * @remarks
    * Network Layer /transport layer protocol. Two types of assignments are supported:
    * 
-   * 1.  The case-insensitive protocol name. Valid values:
+   * 1. The case-insensitive protocol name. Valid values:
    * 
-   * *   ICMP
-   * *   GRE
-   * *   TCP
-   * *   UDP
-   * *   ALL: supports all protocols.
+   * - ICMP
    * 
-   * 2.  The value of the IANA-compliant protocol number, which is an integer from 0 to 255. List of regions currently available:
+   * - GRE
    * 
-   * *   Philippines (Manila)
-   * *   UK (London)
-   * *   Malaysia (Kuala Lumpur)
-   * *   China (Hohhot)
-   * *   China (Qingdao)
-   * *   US (Silicon Valley)
-   * *   Singapore
+   * - TCP
+   * 
+   * - UDP
+   * 
+   * - ALL: supports all protocols.
+   * 
+   * 2. The value of the IANA-compliant protocol number, which is an integer from 0 to 255. List of regions currently available:
+   * 
+   * - Philippines (Manila)
+   * 
+   * - UK (London)
+   * 
+   * - Malaysia (Kuala Lumpur)
+   * 
+   * - China (Hohhot)
+   * 
+   * - China (Qingdao)
+   * 
+   * - US (Silicon Valley)
+   * 
+   * - Singapore
    * 
    * @example
-   * all
+   * ALL
    */
   ipProtocol?: string;
   /**
    * @remarks
    * The destination IPv6 CIDR block. IPv6 CIDR blocks and IPv6 addresses are supported.
    * 
-   * >  Only the IP addresses of instances in VPCs are supported. You cannot specify both Ipv6DestCidrIp and `DestCidrIp`.
+   * > Only the IP addresses of instances in VPCs are supported. You cannot specify both Ipv6DestCidrIp and `DestCidrIp`.
    * 
    * By default, this parameter is left empty.
    * 
@@ -71,7 +81,7 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
    * @remarks
    * The source IPv6 CIDR block. IPv6 CIDR blocks and IPv6 addresses are supported.
    * 
-   * >  Only the IP addresses of instances in virtual private clouds (VPCs) are supported. You cannot specify both Ipv6SourceCidrIp and `SourceCidrIp`.
+   * > Only the IP addresses of instances in virtual private clouds (VPCs) are supported. You cannot specify both Ipv6SourceCidrIp and `SourceCidrIp`.
    * 
    * By default, this parameter is left empty.
    * 
@@ -83,7 +93,7 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
    * @remarks
    * The type of the network interface controller (NIC).
    * 
-   * >  You cannot modify this parameter when you modify a security group rule by specifying the ID of the rule. If you want to change the NIC type of a security group rule, you can create a security group rule of a desired NIC type and delete the existing rule.
+   * > You cannot modify this parameter when you modify a security group rule by specifying the ID of the rule. If you want to change the NIC type of a security group rule, you can create a security group rule of a desired NIC type and delete the existing rule.
    * 
    * @example
    * intranet
@@ -95,8 +105,9 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
    * @remarks
    * The action of the security group rule. Valid values:
    * 
-   * *   accept: allows access.
-   * *   drop: denies access and returns no responses.
+   * - accept: allows access.
+   * 
+   * - drop: denies access and returns no responses.
    * 
    * Default value: accept.
    * 
@@ -108,10 +119,13 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
    * @remarks
    * The range of destination ports that correspond to the transport layer protocol. Valid values:
    * 
-   * *   If you set IpProtocol to TCP or UDP, the port number range is 1 to 65535. Separate the start port number and the end port number with a forward slash (/). Example: 1/200.
-   * *   If you set IpProtocol to ICMP, the port number range is -1/-1.
-   * *   If you set IpProtocol to GRE, the port number range is -1/-1.
-   * *   If you set IpProtocol to ALL, the port number range is -1/-1.
+   * - If you set IpProtocol to TCP or UDP, the port number range is 1 to 65535. Separate the start port number and the end port number with a forward slash (/). Example: 1/200.
+   * 
+   * - If you set IpProtocol to ICMP, the port number range is -1/-1.
+   * 
+   * - If you set IpProtocol to GRE, the port number range is -1/-1.
+   * 
+   * - If you set IpProtocol to ALL, the port number range is -1/-1.
    * 
    * @example
    * 80/80
@@ -121,8 +135,9 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
    * @remarks
    * The ID of the port list. You can call the `DescribePortRangeLists` operation to query the IDs of available port lists.
    * 
-   * *   If you specify PortRange, this parameter is ignored.
-   * *   If a security group is in the classic network, you cannot configure port lists in the rules of the security group. For information about the limits on security groups and port lists, see [Security group limits](~~25412#SecurityGroupQuota1~~).
+   * - If you specify PortRange, this parameter is ignored.
+   * 
+   * - If a security group is in the classic network, you cannot configure port lists in the rules of the security group. For information about the limits on security groups and port lists, see [Security group limits](~~25412#SecurityGroupQuota1~~).
    * 
    * @example
    * prl-2ze9743****
@@ -182,8 +197,9 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
    * @remarks
    * The source security group ID. You must specify either `SourceGroupId` or `SourceCidrIp` or specify both of them.
    * 
-   * *   If `SourceGroupId` is specified but `SourceCidrIp` is not specified, the value of `NicType` must be set to intranet.
-   * *   If both `SourceGroupId` and `SourceCidrIp` are specified, the value of `SourceCidrIp` prevails by default.
+   * - If `SourceGroupId` is specified but `SourceCidrIp` is not specified, the value of `NicType` must be set to intranet.
+   * 
+   * - If both `SourceGroupId` and `SourceCidrIp` are specified, the value of `SourceCidrIp` prevails by default.
    * 
    * @example
    * sg-bp67acfmxa123b****
@@ -193,8 +209,9 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
    * @remarks
    * The Alibaba Cloud account that manages the source security group when you configure a security group rule across accounts.
    * 
-   * *   If both `SourceGroupOwnerId` and `SourceGroupOwnerAccount` are empty, access permissions are configured for another security group managed by your account.
-   * *   If `SourceCidrIp` is specified, `SourceGroupOwnerAccount` is ignored.
+   * - If both `SourceGroupOwnerId` and `SourceGroupOwnerAccount` are empty, access permissions are configured for another security group managed by your account.
+   * 
+   * - If `SourceCidrIp` is specified, `SourceGroupOwnerAccount` is ignored.
    * 
    * @example
    * EcsforCloud@Alibaba.com
@@ -204,8 +221,9 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
    * @remarks
    * The ID of the Alibaba Cloud account that manages the source security group when you configure a security group rule across accounts.
    * 
-   * *   If both `SourceGroupOwnerId` and `SourceGroupOwnerAccount` are empty, access permissions are configured for another security group managed by your account.
-   * *   If `SourceCidrIp` is specified, `SourceGroupOwnerId` is ignored.
+   * - If both `SourceGroupOwnerId` and `SourceGroupOwnerAccount` are empty, access permissions are configured for another security group managed by your account.
+   * 
+   * - If `SourceCidrIp` is specified, `SourceGroupOwnerId` is ignored.
    * 
    * @example
    * 12345678910
@@ -215,10 +233,13 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
    * @remarks
    * The range of source ports that correspond to the transport layer protocol. Valid values:
    * 
-   * *   If you set IpProtocol to TCP or UDP, the port number range is 1 to 65535. Separate the start port number and the end port number with a forward slash (/). Example: 1/200.
-   * *   If you set IpProtocol to ICMP, the port number range is -1/-1.
-   * *   If you set IpProtocol to GRE, the port number range is -1/-1.
-   * *   If you set IpProtocol to ALL, the port number range is -1/-1.
+   * - If you set IpProtocol to TCP or UDP, the port number range is 1 to 65535. Separate the start port number and the end port number with a forward slash (/). Example: 1/200.
+   * 
+   * - If you set IpProtocol to ICMP, the port number range is -1/-1.
+   * 
+   * - If you set IpProtocol to GRE, the port number range is -1/-1.
+   * 
+   * - If you set IpProtocol to ALL, the port number range is -1/-1.
    * 
    * @example
    * 80/80

package/src/models/ModifySnapshotAttributeRequest.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class ModifySnapshotAttributeRequest extends $dara.Model {
   /**
    * @remarks
-   * The snapshot description. It can be empty or up to 256 characters in length. It cannot start with http:// or https://.
+   * The snapshot description. It can be empty or up to 256 characters in length. It cannot start with http\\:// or https\\://.
    * 
    * @example
    * testDescription
@@ -15,12 +15,13 @@ export class ModifySnapshotAttributeRequest extends $dara.Model {
    * @remarks
    * Specifies whether to disable the instant access feature. Valid values:
    * 
-   * *   true
-   * *   false
+   * - true
+   * 
+   * - false
    * 
    * Default value: false.
    * 
-   * >  This parameter is no longer used. By default, new standard snapshots of Enterprise SSDs (ESSDs) are upgraded to instant access snapshots free of charge without the need for additional configurations. For more information, see [Use the instant access feature](https://help.aliyun.com/document_detail/193667.html).
+   * > This parameter is no longer used. By default, new standard snapshots of Enterprise SSDs (ESSDs) are upgraded to instant access snapshots free of charge without the need for additional configurations. For more information, see [Use the instant access feature](https://help.aliyun.com/document_detail/193667.html).
    * 
    * @example
    * false
@@ -34,7 +35,7 @@ export class ModifySnapshotAttributeRequest extends $dara.Model {
    * @remarks
    * The retention period of the snapshot. After you specify this parameter, the end time of the new retention period is the specified number of days apart from the **creation time** of the snapshot, which follows the ISO 8601 standard in the yyyy-MM-ddTHH:mm:ssZ format and is displayed in UTC. Valid values: 1 to 65536.
    * 
-   * >  You can extend the retention period of the snapshot and cannot shorten the retention period.
+   * > You can extend the retention period of the snapshot and cannot shorten the retention period.
    * 
    * @example
    * 10
@@ -52,7 +53,7 @@ export class ModifySnapshotAttributeRequest extends $dara.Model {
   snapshotId?: string;
   /**
    * @remarks
-   * The name of the snapshot. The name must be 2 to 128 characters in length. It must start with a letter and cannot start with http:// or https://. It can contain letters, digits, colons (:), underscores (_), and hyphens (-).
+   * The name of the snapshot. The name must be 2 to 128 characters in length. It must start with a letter and cannot start with http\\:// or https\\://. It can contain letters, digits, colons (:), underscores (_), and hyphens (-).
    * 
    * The name cannot start with auto because snapshots whose names start with auto are recognized as automatic snapshots.
    * 

package/src/models/ModifySnapshotCategoryRequest.ts

@@ -5,9 +5,9 @@ import * as $dara from '@darabonba/typescript';
 export class ModifySnapshotCategoryRequest extends $dara.Model {
   /**
    * @remarks
-   * The type of the snapshot.
+   * The snapshot type.
    * 
-   * *   Archive: archive snapshot
+   * - Archive: archive snapshot.
    * 
    * @example
    * Archive
@@ -19,21 +19,21 @@ export class ModifySnapshotCategoryRequest extends $dara.Model {
   resourceOwnerId?: number;
   /**
    * @remarks
-   * The retention period of the snapshot. Unit: days. The retention period started at the point in time when the snapshot was created. You can archive only standard snapshots that have been retained for at least 14 days.
+   * The number of days for which the snapshot is retained. The retention period starts from the snapshot creation time (CreationTime). A standard snapshot must have been retained for at least 14 days after creation before it can be archived.
    * 
-   * After the snapshot is archived, the minimum retention period (also called minimum archive period) is 60 days. When you calculate the retention period of archived snapshots, you must deduct the retention period of standard snapshots. If you delete the snapshot within 60 days after the snapshot is archived, you are charged archive tier storage fees for the snapshot for 60 days. For more information about the billing of snapshots, see [Snapshots](https://help.aliyun.com/document_detail/56159.html).
+   * Archive snapshots must be retained for at least 60 days. When the retention period of an archive snapshot is calculated, the retention period of the standard snapshot is deducted. If an archive snapshot is deleted before 60 days, you are charged for 60 days of archive storage. For more information, see [Snapshot billing](https://help.aliyun.com/document_detail/56159.html).
    * 
-   * Value range [74,65536]
+   * Valid values: [74, 65536].
    * 
    * > If you do not specify this parameter, the snapshot is permanently retained.
    * 
    * @example
-   * 60
+   * 100
    */
   retentionDays?: number;
   /**
    * @remarks
-   * The ID of the snapshot.
+   * The snapshot ID.
    * 
    * This parameter is required.
    * 

package/src/models/ModifySnapshotCategoryResponseBody.ts

@@ -13,7 +13,7 @@ export class ModifySnapshotCategoryResponseBody extends $dara.Model {
   requestId?: string;
   /**
    * @remarks
-   * The ID of the archive task. You can call the DescribeTasks operation to query the status and progress of the archive task.
+   * The archive task ID. You can call the DescribeTasks operation to query the status and progress of the task.
    * 
    * @example
    * t-dxh34xds**d

package/src/models/ModifyStorageCapacityUnitAttributeRequest.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class ModifyStorageCapacityUnitAttributeRequest extends $dara.Model {
   /**
    * @remarks
-   * The new description of the SCU. The description must be 2 to 256 characters in length and cannot start with [http:// or https://.](http://https://。)
+   * The new description of the SCU. The description must be 2 to 256 characters in length and cannot start with [http:// or https://.](http://https://%E3%80%82)
    * 
    * @example
    * testNewScuDescription
@@ -13,7 +13,7 @@ export class ModifyStorageCapacityUnitAttributeRequest extends $dara.Model {
   description?: string;
   /**
    * @remarks
-   * The new name of the SCU. The name must be 2 to 128 characters in length. It must start with a letter and cannot start with [http:// or https://. It can contain letters, digits, colons (:), underscores (_), and hyphens (-).](http://https://。、（:）、（_）（-）。)
+   * The new name of the SCU. The name must be 2 to 128 characters in length. It must start with a letter and cannot start with [http:// or https://. It can contain letters, digits, colons (:), underscores (_), and hyphens (-).](http://https://%E3%80%82%E3%80%81%EF%BC%88:%EF%BC%89%E3%80%81%EF%BC%88_%EF%BC%89%EF%BC%88-%EF%BC%89%E3%80%82)
    * 
    * @example
    * testNewScuName

package/src/models/ModifyStorageSetAttributeRequest.ts

@@ -3,53 +3,22 @@ import * as $dara from '@darabonba/typescript';
 
 
 export class ModifyStorageSetAttributeRequest extends $dara.Model {
-  /**
-   * @remarks
-   * The client token that is used to ensure the idempotence of the request. You can use the client to generate the value, but you must make sure that it is unique among different requests. The value of **ClientToken** can contain only ASCII characters and cannot exceed 64 characters in length. For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
-   * 
-   * @example
-   * 123e4567-e89b-12d3-a456-426655440000
-   */
   clientToken?: string;
-  /**
-   * @remarks
-   * The description of the storage set.
-   * 
-   * @example
-   * testStorageSetDescription
-   */
   description?: string;
   ownerAccount?: string;
   ownerId?: number;
   /**
    * @remarks
-   * The region ID of the storage set. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent region list.
-   * 
    * This parameter is required.
-   * 
-   * @example
-   * cn-hangzhou
    */
   regionId?: string;
   resourceOwnerAccount?: string;
   resourceOwnerId?: number;
   /**
    * @remarks
-   * The ID of the storage set.
-   * 
    * This parameter is required.
-   * 
-   * @example
-   * ss-bp67acfmxazb4ph****
    */
   storageSetId?: string;
-  /**
-   * @remarks
-   * The name of the storage set.
-   * 
-   * @example
-   * testStorageSetName
-   */
   storageSetName?: string;
   static names(): { [key: string]: string } {
     return {

package/src/models/ModifyStorageSetAttributeResponseBody.ts

@@ -3,13 +3,6 @@ import * as $dara from '@darabonba/typescript';
 
 
 export class ModifyStorageSetAttributeResponseBody extends $dara.Model {
-  /**
-   * @remarks
-   * The ID of the request.
-   * 
-   * @example
-   * 04F0F334-1335-436C-A1D7-6C044FE73369
-   */
   requestId?: string;
   static names(): { [key: string]: string } {
     return {

package/src/models/ModifyUserBusinessBehaviorRequest.ts

@@ -5,16 +5,24 @@ import * as $dara from '@darabonba/typescript';
 export class ModifyUserBusinessBehaviorRequest extends $dara.Model {
   ownerAccount?: string;
   ownerId?: number;
+  /**
+   * @remarks
+   * The ID of the region.
+   */
   regionId?: string;
   resourceOwnerAccount?: string;
   resourceOwnerId?: number;
   /**
    * @remarks
+   * The key of the attribute to modify.
+   * 
    * This parameter is required.
    */
   statusKey?: string;
   /**
    * @remarks
+   * The new value of the attribute.
+   * 
    * This parameter is required.
    */
   statusValue?: string;

package/src/models/ModifyUserBusinessBehaviorResponseBody.ts

@@ -3,6 +3,10 @@ import * as $dara from '@darabonba/typescript';
 
 
 export class ModifyUserBusinessBehaviorResponseBody extends $dara.Model {
+  /**
+   * @remarks
+   * The request ID.
+   */
   requestId?: string;
   static names(): { [key: string]: string } {
     return {

package/src/models/ModifyVirtualBorderRouterAttributeRequest.ts

@@ -3,28 +3,78 @@ import * as $dara from '@darabonba/typescript';
 
 
 export class ModifyVirtualBorderRouterAttributeRequest extends $dara.Model {
+  /**
+   * @remarks
+   * The circuit code of the Express Connect circuit. The circuit code is provided by your connectivity provider.
+   */
   circuitCode?: string;
+  /**
+   * @remarks
+   * A client-generated token that ensures the request is idempotent. The token must be unique for each request, contain only ASCII characters, and not exceed 64 characters in length.
+   */
   clientToken?: string;
+  /**
+   * @remarks
+   * The description of the VBR.
+   * 
+   * The description must be 2 to 256 characters long. It must start with a letter and cannot start with `http://` or `https://`.
+   */
   description?: string;
+  /**
+   * @remarks
+   * The local gateway IP address for the BGP session.
+   */
   localGatewayIp?: string;
+  /**
+   * @remarks
+   * The name of the VBR.
+   * 
+   * The name must be 2 to 128 characters long. It must start with a letter and can contain letters, digits, underscores (_), and hyphens (-).
+   */
   name?: string;
   ownerAccount?: string;
   ownerId?: number;
+  /**
+   * @remarks
+   * The peer gateway IP address for the BGP session.
+   */
   peerGatewayIp?: string;
+  /**
+   * @remarks
+   * The subnet mask for the `LocalGatewayIp` and `PeerGatewayIp`.
+   */
   peeringSubnetMask?: string;
   /**
    * @remarks
+   * The ID of the region where the virtual border router (VBR) is deployed.
+   * 
+   * To get a list of the latest regions, call the `DescribeRegions` operation.
+   * 
    * This parameter is required.
    */
   regionId?: string;
   resourceOwnerAccount?: string;
   resourceOwnerId?: number;
+  /**
+   * @remarks
+   * The CIDR block of the on-premises network that is connected to the VBR.
+   */
   userCidr?: string;
   /**
    * @remarks
+   * The ID of the VBR to modify.
+   * 
    * This parameter is required.
    */
   vbrId?: string;
+  /**
+   * @remarks
+   * The VLAN ID of the VBR. The VLAN ID must be unique on the physical connection.
+   * 
+   * Valid values: 0 to 4095.
+   * 
+   * A value of 0 indicates that the VBR does not use a VLAN.
+   */
   vlanId?: number;
   static names(): { [key: string]: string } {
     return {

package/src/models/ModifyVirtualBorderRouterAttributeResponseBody.ts

@@ -3,6 +3,10 @@ import * as $dara from '@darabonba/typescript';
 
 
 export class ModifyVirtualBorderRouterAttributeResponseBody extends $dara.Model {
+  /**
+   * @remarks
+   * The request ID.
+   */
   requestId?: string;
   static names(): { [key: string]: string } {
     return {

package/src/models/ModifyVpcAttributeRequest.ts

@@ -3,19 +3,41 @@ import * as $dara from '@darabonba/typescript';
 
 
 export class ModifyVpcAttributeRequest extends $dara.Model {
+  /**
+   * @remarks
+   * The primary IPv4 cidr block for the VPC. You can only expand this cidr block, for example, from `192.168.0.0/24` to `192.168.0.0/16`. You cannot modify the primary cidr block if ClassicLink is enabled.
+   */
   cidrBlock?: string;
+  /**
+   * @remarks
+   * The description must be 2 to 256 characters long. It must start with a letter and cannot begin with `http://` or `https://`.
+   */
   description?: string;
   ownerAccount?: string;
   ownerId?: number;
+  /**
+   * @remarks
+   * The ID of the VPC\\"s region.
+   */
   regionId?: string;
   resourceOwnerAccount?: string;
   resourceOwnerId?: number;
+  /**
+   * @remarks
+   * A user cidr block to add to the VPC. You can add up to three user cidr blocks. They cannot overlap with the primary cidr block, each other, or the reserved `100.64.0.0/10` cidr block.
+   */
   userCidr?: string;
   /**
    * @remarks
+   * The ID of the VPC to modify.
+   * 
    * This parameter is required.
    */
   vpcId?: string;
+  /**
+   * @remarks
+   * The name must be 2 to 128 characters long, start with a letter, and can contain letters, digits, underscores (_), and hyphens (-).
+   */
   vpcName?: string;
   static names(): { [key: string]: string } {
     return {

package/src/models/ModifyVpcAttributeResponseBody.ts

@@ -3,6 +3,10 @@ import * as $dara from '@darabonba/typescript';
 
 
 export class ModifyVpcAttributeResponseBody extends $dara.Model {
+  /**
+   * @remarks
+   * The request ID.
+   */
   requestId?: string;
   static names(): { [key: string]: string } {
     return {

package/src/models/ModifyVrouterAttributeRequest.ts

@@ -3,17 +3,31 @@ import * as $dara from '@darabonba/typescript';
 
 
 export class ModifyVRouterAttributeRequest extends $dara.Model {
+  /**
+   * @remarks
+   * The description of the virtual router. The description must be 2 to 256 characters long and can contain letters, digits, underscores (_), and hyphens (-). It must start with a letter and cannot start with `http://` or `https://`.
+   */
   description?: string;
   ownerAccount?: string;
   ownerId?: number;
+  /**
+   * @remarks
+   * The ID of the region where the virtual router is deployed. You can call the `DescribeRegions` operation to obtain the most recent list of regions.
+   */
   regionId?: string;
   resourceOwnerAccount?: string;
   resourceOwnerId?: number;
   /**
    * @remarks
+   * The ID of the VRouter to modify.
+   * 
    * This parameter is required.
    */
   VRouterId?: string;
+  /**
+   * @remarks
+   * The name of the virtual router. The name must be 2 to 128 characters long and can contain letters, digits, underscores (_), and hyphens (-). It must start with a letter and cannot start with `http://` or `https://`.
+   */
   VRouterName?: string;
   static names(): { [key: string]: string } {
     return {

package/src/models/ModifyVrouterAttributeResponseBody.ts

@@ -3,6 +3,10 @@ import * as $dara from '@darabonba/typescript';
 
 
 export class ModifyVRouterAttributeResponseBody extends $dara.Model {
+  /**
+   * @remarks
+   * The request ID.
+   */
   requestId?: string;
   static names(): { [key: string]: string } {
     return {

package/src/models/ModifyVswitchAttributeRequest.ts

@@ -3,17 +3,33 @@ import * as $dara from '@darabonba/typescript';
 
 
 export class ModifyVSwitchAttributeRequest extends $dara.Model {
+  /**
+   * @remarks
+   * The new description for the vSwitch.\\
+   * The description must be 2 to 256 characters in length and cannot start with `http://` or `https://`.\\
+   */
   description?: string;
   ownerAccount?: string;
   ownerId?: number;
+  /**
+   * @remarks
+   * The ID of the region where the vSwitch is located.
+   */
   regionId?: string;
   resourceOwnerAccount?: string;
   resourceOwnerId?: number;
   /**
    * @remarks
+   * The ID of the vSwitch to modify.
+   * 
    * This parameter is required.
    */
   vSwitchId?: string;
+  /**
+   * @remarks
+   * The new name for the vSwitch.\\
+   * The name must be 2 to 128 characters in length. It must start with a letter and can contain letters, digits, underscores (_), and hyphens (-).\\
+   */
   vSwitchName?: string;
   static names(): { [key: string]: string } {
     return {

package/src/models/ModifyVswitchAttributeResponseBody.ts

@@ -3,6 +3,10 @@ import * as $dara from '@darabonba/typescript';
 
 
 export class ModifyVSwitchAttributeResponseBody extends $dara.Model {
+  /**
+   * @remarks
+   * The request ID.
+   */
   requestId?: string;
   static names(): { [key: string]: string } {
     return {