@alicloud/ecs20140526 4.3.0 → 4.4.0

package/dist/client.d.ts

@@ -631,7 +631,7 @@ export declare class AllocatePublicIpAddressRequest extends $tea.Model {
      * The public IP address. If you leave this parameter empty, the system randomly assigns a public IP address to the instance.
      *
      * @example
-     * 112.124.\*\*.**
+     * ``112.124.**.**``
      */
     ipAddress?: string;
     ownerAccount?: string;
@@ -664,7 +664,7 @@ export declare class AllocatePublicIpAddressResponseBody extends $tea.Model {
      * The public IP address.
      *
      * @example
-     * 112.124.\*\*.**
+     * ``112.124.**.**``
      */
     ipAddress?: string;
     /**
@@ -963,7 +963,7 @@ export declare class AssignPrivateIpAddressesRequest extends $tea.Model {
      * To assign secondary private IP addresses to the ENI, you must specify `PrivateIpAddress.N` or `SecondaryPrivateIpAddressCount` but not both.
      *
      * @example
-     * 10.1.\*\*.**
+     * ``10.1.**.**``
      */
     privateIpAddress?: string[];
     /**
@@ -3249,7 +3249,7 @@ export declare class CreateAutoProvisioningGroupRequest extends $tea.Model {
      * Specifies whether to release scaled-in instances when the real-time capacity of the auto provisioning group exceeds the target capacity and the group is triggered to scale in. Valid values:
      *
      * *   termination: releases the scaled-in instances in the auto provisioning group.
-     * *   no-termination: only removes the scaled-in instances from the auto provisioning group but does not release the instances.
+     * *   no-termination: removes the scaled-in instances from the auto provisioning group but does not release the instances.
      *
      * Default value: no-termination.
      *
@@ -6333,7 +6333,7 @@ export declare class CreateInstanceRequest extends $tea.Model {
      * The internal IP address to assign to the instance.
      *
      * @example
-     * 192.168.\*\*.**
+     * ``192.168.**.**``
      */
     innerIpAddress?: string;
     /**
@@ -6868,13 +6868,15 @@ export declare class CreateLaunchTemplateRequest extends $tea.Model {
     autoReleaseTime?: string;
     /**
      * @remarks
-     * Specifies whether to enable auto-renewal for the instance. This parameter is valid only if `InstanceChargeType` is set to `PrePaid`. Valid values:
+     * Specifies whether to enable auto-renewal. Valid values:
      *
      * *   true
      * *   false
      *
      * Default value: false.
      *
+     * >  This parameter takes effect only if you set `InstanceChargeType` to `PrePaid`.
+     *
      * @example
      * true
      */
@@ -7135,7 +7137,7 @@ export declare class CreateLaunchTemplateRequest extends $tea.Model {
      * To assign a private IP address to an instance that resides in a VPC, make sure that the IP address is an idle IP address within the CIDR block of the vSwitch specified by the `VSwitchId` parameter.
      *
      * @example
-     * 10.1.\*\*.**
+     * ``10.1.**.**``
      */
     privateIpAddress?: string;
     /**
@@ -7234,7 +7236,11 @@ export declare class CreateLaunchTemplateRequest extends $tea.Model {
     spotStrategy?: string;
     /**
      * @remarks
-     * The tags to add to the instance, disks, and primary ENI.
+     * The tags to add to the instance, disks, and primary ENI that are created from the launch template.
+     *
+     * **Scenario**
+     *
+     * If you created a launch template by calling the CreateLaunchTemplate operation and use the default version that is automatically generated for the launch template to create instances, the specified tags are automatically added to the created instances, disks, and primary ENIs. For more information about the default versions of launch templates, see [xxxx]\\(url).
      */
     tag?: CreateLaunchTemplateRequestTag[];
     /**
@@ -7248,6 +7254,8 @@ export declare class CreateLaunchTemplateRequest extends $tea.Model {
     /**
      * @remarks
      * The tags to add to the launch template.
+     *
+     * >  You can add tags to or query the tags of launch templates by calling API operations. You cannot add tags to or query the tags of launch templates in the ECS console.
      */
     templateTag?: CreateLaunchTemplateRequestTemplateTag[];
     /**
@@ -7498,7 +7506,7 @@ export declare class CreateLaunchTemplateVersionRequest extends $tea.Model {
     instanceName?: string;
     /**
      * @remarks
-     * The instance type. For more information, see [Instance families](https://help.aliyun.com/document_detail/25378.html) or call the [DescribeInstanceTypes](https://help.aliyun.com/document_detail/25620.html) operation to query the most recent instance type list.
+     * The instance type. For more information, see [Overview of instance families](https://help.aliyun.com/document_detail/25378.html). You can also call the [DescribeInstanceTypes](https://help.aliyun.com/document_detail/25620.html) operation to query the most recent list of instance types.
      *
      * @example
      * ecs.g5.large
@@ -7640,7 +7648,7 @@ export declare class CreateLaunchTemplateVersionRequest extends $tea.Model {
      * To assign a private IP address to an instance of the VPC type, make sure that the IP address is an idle IP address within the CIDR block of the vSwitch specified by the `VSwitchId` parameter.
      *
      * @example
-     * 10.1.\*\*.**
+     * ``10.1.**.**``
      */
     privateIpAddress?: string;
     /**
@@ -7684,9 +7692,9 @@ export declare class CreateLaunchTemplateVersionRequest extends $tea.Model {
     securityEnhancementStrategy?: string;
     /**
      * @remarks
-     * The ID of the security group to which to assign the instance. Instances within the same security group can access each other.
+     * The ID of the security group to which to assign the ECS instance created based on the launch template version. Instances in the same security group can access each other.
      *
-     * > The `SecurityGroupId` parameter and the `SecurityGroupIds.N` parameter are mutually exclusive.
+     * >  You cannot specify `SecurityGroupId` and `SecurityGroupIds.N` in the same request.
      *
      * @example
      * sg-bp15ed6xe1yxeycg****
@@ -7739,7 +7747,7 @@ export declare class CreateLaunchTemplateVersionRequest extends $tea.Model {
     spotStrategy?: string;
     /**
      * @remarks
-     * The tags to add to the instance, disks, and primary ENI.
+     * The tags to add to the ECS instance, disks, and primary elastic network interface (ENI) created based on the launch template version.
      */
     tag?: CreateLaunchTemplateVersionRequestTag[];
     /**
@@ -7768,7 +7776,7 @@ export declare class CreateLaunchTemplateVersionRequest extends $tea.Model {
     versionDescription?: string;
     /**
      * @remarks
-     * The ID of the virtual private cloud (VPC).
+     * The ID of the virtual private cloud (VPC) in which to create the ECS instance.
      *
      * @example
      * vpc-bp12433upq1y5scen****
@@ -7805,7 +7813,7 @@ export declare class CreateLaunchTemplateVersionResponseBody extends $tea.Model
     launchTemplateId?: string;
     /**
      * @remarks
-     * The version number of the launch template.
+     * The number of the created version of the launch template.
      *
      * @example
      * 2
@@ -8065,7 +8073,7 @@ export declare class CreateNetworkInterfaceRequest extends $tea.Model {
      * The specified IP address must be an idle IP address within the CIDR block of the vSwitch with which to associate the ENI. If this parameter is not specified, an idle IP address is assigned from within the vSwitch CIDR block at random.
      *
      * @example
-     * 172.17.\*\*.**
+     * ``172.17.**.**``
      */
     primaryIpAddress?: string;
     /**
@@ -8075,7 +8083,7 @@ export declare class CreateNetworkInterfaceRequest extends $tea.Model {
      * >  To assign secondary private IP addresses to the ENI, you can specify the `PrivateIpAddress.N` or `SecondaryPrivateIpAddressCount` parameter, but not both.
      *
      * @example
-     * 172.17.\*\*.**
+     * ``172.17.**.**``
      */
     privateIpAddress?: string[];
     /**
@@ -8266,7 +8274,7 @@ export declare class CreateNetworkInterfaceResponseBody extends $tea.Model {
      * The private IP address of the ENI.
      *
      * @example
-     * 172.17.\*\*.**
+     * ``172.17.**.**``
      */
     privateIpAddress?: string;
     /**
@@ -11436,7 +11444,7 @@ export declare class DeleteLaunchTemplateVersionRequest extends $tea.Model {
 export declare class DeleteLaunchTemplateVersionResponseBody extends $tea.Model {
     /**
      * @remarks
-     * The versions of the launch template.
+     * The deleted launch template versions.
      */
     launchTemplateVersions?: DeleteLaunchTemplateVersionResponseBodyLaunchTemplateVersions;
     /**
@@ -16278,6 +16286,8 @@ export declare class DescribeDiagnosticReportsResponse extends $tea.Model {
 export declare class DescribeDiskDefaultKMSKeyIdRequest extends $tea.Model {
     /**
      * @remarks
+     * The ID of the region. You can call the DescribeRegions operation to query the most recent region list.
+     *
      * This parameter is required.
      *
      * @example
@@ -16297,11 +16307,17 @@ export declare class DescribeDiskDefaultKMSKeyIdRequest extends $tea.Model {
 }
 export declare class DescribeDiskDefaultKMSKeyIdResponseBody extends $tea.Model {
     /**
+     * @remarks
+     * The ID of the KMS key.
+     *
      * @example
      * 0e478b7a-4262-4802-b8cb-00d3fb40****
      */
     KMSKeyId?: string;
     /**
+     * @remarks
+     * The request ID.
+     *
      * @example
      * 473469C7-AA6F-4DC5-B3DB-A3DC0DE3****
      */
@@ -16335,6 +16351,8 @@ export declare class DescribeDiskDefaultKMSKeyIdResponse extends $tea.Model {
 export declare class DescribeDiskEncryptionByDefaultStatusRequest extends $tea.Model {
     /**
      * @remarks
+     * The ID of the region. You can call the DescribeRegions operation to query the most recent region list.
+     *
      * This parameter is required.
      *
      * @example
@@ -16354,11 +16372,22 @@ export declare class DescribeDiskEncryptionByDefaultStatusRequest extends $tea.M
 }
 export declare class DescribeDiskEncryptionByDefaultStatusResponseBody extends $tea.Model {
     /**
+     * @remarks
+     * Indicates whether account-level default encryption of EBS resources is enabled in the region. Valid values:
+     *
+     * *   true
+     * *   false
+     *
+     * Default value: false.
+     *
      * @example
      * false
      */
     encrypted?: boolean;
     /**
+     * @remarks
+     * The request ID.
+     *
      * @example
      * 473469C7-AA6F-4DC5-B3DB-A3DC0DE3C83E
      */
@@ -22639,7 +22668,10 @@ export declare class DescribeLaunchTemplateVersionsResponse extends $tea.Model {
 export declare class DescribeLaunchTemplatesRequest extends $tea.Model {
     /**
      * @remarks
-     * The IDs of launch templates. You can specify up to 100 launch template IDs. You must specify LaunchTemplateId or LaunchTemplateName to determine a launch template.
+     * The IDs of launch templates.
+     *
+     * *   You can query up to 100 launch templates.
+     * *   You must specify LaunchTemplateId or LaunchTemplateName to specify a launch template.
      *
      * @example
      * lt-m5e3ofjr1zn1aw7q****
@@ -22647,7 +22679,10 @@ export declare class DescribeLaunchTemplatesRequest extends $tea.Model {
     launchTemplateId?: string[];
     /**
      * @remarks
-     * The names of launch templates. You can specify up to 100 launch template names.
+     * The names of launch templates.
+     *
+     * *   You can query up to 100 launch templates.
+     * *   You must specify LaunchTemplateId or LaunchTemplateName to specify a launch template.
      *
      * @example
      * wd-152630748****
@@ -22697,7 +22732,9 @@ export declare class DescribeLaunchTemplatesRequest extends $tea.Model {
     templateResourceGroupId?: string;
     /**
      * @remarks
-     * The tag of the launch template.
+     * The tags of the launch template.
+     *
+     * >  You can only call API operations to add tags to and query the tags of a launch template. You cannot add tags to or view the tags of a launch template in the Elastic Compute Service (ECS) console.
      */
     templateTag?: DescribeLaunchTemplatesRequestTemplateTag[];
     static names(): {
@@ -22713,7 +22750,7 @@ export declare class DescribeLaunchTemplatesRequest extends $tea.Model {
 export declare class DescribeLaunchTemplatesResponseBody extends $tea.Model {
     /**
      * @remarks
-     * The information about the launch template.
+     * The queried launch templates.
      */
     launchTemplateSets?: DescribeLaunchTemplatesResponseBodyLaunchTemplateSets;
     /**
@@ -22846,7 +22883,7 @@ export declare class DescribeManagedInstancesRequest extends $tea.Model {
      * The internal or public IP address of the managed instance.
      *
      * @example
-     * 192.168.\*\*.**
+     * ``192.168.**.**``
      */
     instanceIp?: string;
     /**
@@ -23265,7 +23302,7 @@ export declare class DescribeNetworkInterfaceAttributeResponseBody extends $tea.
      * The private IP address of the ENI.
      *
      * @example
-     * 10.1.\*\*.**
+     * ``10.1.**.**``
      */
     privateIpAddress?: string;
     /**
@@ -23347,6 +23384,7 @@ export declare class DescribeNetworkInterfaceAttributeResponseBody extends $tea.
      * >  This parameter is in invitational preview and unavailable for general users.
      */
     slaveInterfaceSpecification?: DescribeNetworkInterfaceAttributeResponseBodySlaveInterfaceSpecification;
+    sourceDestCheck?: boolean;
     /**
      * @remarks
      * The state of the ENI. Valid values:
@@ -23661,7 +23699,7 @@ export declare class DescribeNetworkInterfacesRequest extends $tea.Model {
      * The primary private IPv4 address of the ENI.
      *
      * @example
-     * 192.168.\*\*.**
+     * ``192.168.**.**``
      */
     primaryIpAddress?: string;
     /**
@@ -23669,7 +23707,7 @@ export declare class DescribeNetworkInterfacesRequest extends $tea.Model {
      * An array that consists of the secondary private IPv4 addresses of the ENI. You can specify multiple secondary private IPv4 addresses. Valid values of N: 1 to 100.
      *
      * @example
-     * 192.168.\*\*.**
+     * ``192.168.**.**``
      */
     privateIpAddress?: string[];
     /**
@@ -24922,10 +24960,12 @@ export declare class DescribeRegionsRequest extends $tea.Model {
     acceptLanguage?: string;
     /**
      * @remarks
-     * The billing method of instances. For more information, see [Billing overview](https://help.aliyun.com/document_detail/25398.html). Valid values:
+     * The billing method of the instance. For more information, see [Billing overview](https://help.aliyun.com/document_detail/25398.html). Valid values:
      *
      * *   PrePaid: subscription. If you set this parameter to PrePaid, make sure that you have sufficient balance or credits in your account. Otherwise, the InvalidPayMethod error code is returned.
      * *   PostPaid: pay-as-you-go.
+     * *   SpotWithPriceLimit: preemptible instance for which a maximum hourly price is specified.
+     * *   SpotAsPriceGo: preemptible instance for which the market price at the time of purchase is automatically used as the bid price. The market price can be up to the pay-as-you-go price.
      *
      * Default value: PostPaid.
      *
@@ -24939,7 +24979,7 @@ export declare class DescribeRegionsRequest extends $tea.Model {
     resourceOwnerId?: number;
     /**
      * @remarks
-     * The resource type. Valid value:
+     * The type of resource. Valid values:
      *
      * *   instance: Elastic Compute Service (ECS) instance
      * *   disk: disk
@@ -24965,7 +25005,7 @@ export declare class DescribeRegionsRequest extends $tea.Model {
 export declare class DescribeRegionsResponseBody extends $tea.Model {
     /**
      * @remarks
-     * The queried regions.
+     * The information of the regions.
      */
     regions?: DescribeRegionsResponseBodyRegions;
     /**
@@ -30090,6 +30130,8 @@ export declare class DisableActivationResponse extends $tea.Model {
 export declare class DisableDiskEncryptionByDefaultRequest extends $tea.Model {
     /**
      * @remarks
+     * The region ID. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent region list.
+     *
      * This parameter is required.
      *
      * @example
@@ -30109,6 +30151,9 @@ export declare class DisableDiskEncryptionByDefaultRequest extends $tea.Model {
 }
 export declare class DisableDiskEncryptionByDefaultResponseBody extends $tea.Model {
     /**
+     * @remarks
+     * The request ID, which uniquely identifies the request.
+     *
      * @example
      * 473469C7-AA6F-4DC5-B3DB-A3DC0DE3C83E
      */
@@ -30306,6 +30351,8 @@ export declare class EnableDiskEncryptionByDefaultRequest extends $tea.Model {
     ownerId?: number;
     /**
      * @remarks
+     * The region ID. You can call the DescribeRegions operation to query the most recent region list.
+     *
      * This parameter is required.
      *
      * @example
@@ -30326,6 +30373,9 @@ export declare class EnableDiskEncryptionByDefaultRequest extends $tea.Model {
 }
 export declare class EnableDiskEncryptionByDefaultResponseBody extends $tea.Model {
     /**
+     * @remarks
+     * The request ID.
+     *
      * @example
      * 473469C7-AA6F-4DC5-B3DB-A3DC0DE3C83E
      */
@@ -34358,6 +34408,8 @@ export declare class ModifyDiskChargeTypeResponse extends $tea.Model {
 export declare class ModifyDiskDefaultKMSKeyIdRequest extends $tea.Model {
     /**
      * @remarks
+     * The ID of the new KMS key.
+     *
      * This parameter is required.
      *
      * @example
@@ -34366,6 +34418,8 @@ export declare class ModifyDiskDefaultKMSKeyIdRequest extends $tea.Model {
     KMSKeyId?: string;
     /**
      * @remarks
+     * The region ID. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent region list.
+     *
      * This parameter is required.
      *
      * @example
@@ -34385,6 +34439,9 @@ export declare class ModifyDiskDefaultKMSKeyIdRequest extends $tea.Model {
 }
 export declare class ModifyDiskDefaultKMSKeyIdResponseBody extends $tea.Model {
     /**
+     * @remarks
+     * The request ID.
+     *
      * @example
      * 473469C7-AA6F-4DC5-B3DB-A3DC0DE3C83E
      */
@@ -34732,6 +34789,7 @@ export declare class ModifyEipAddressAttributeResponse extends $tea.Model {
 }
 export declare class ModifyElasticityAssuranceRequest extends $tea.Model {
     privatePoolOptions?: ModifyElasticityAssuranceRequestPrivatePoolOptions;
+    clientToken?: string;
     /**
      * @remarks
      * The description of the elasticity assurance. The description must be 2 to 256 characters in length and cannot start with `http://` or `https://`.
@@ -34740,6 +34798,7 @@ export declare class ModifyElasticityAssuranceRequest extends $tea.Model {
      * This is description.
      */
     description?: string;
+    instanceAmount?: number;
     ownerAccount?: string;
     ownerId?: number;
     /**
@@ -36645,11 +36704,6 @@ export declare class ModifyInstanceSpecRequest extends $tea.Model {
      * @remarks
      * >  This parameter is not publicly available.
      *
-     * Valid values:
-     *
-     * *   Online
-     * *   Offline
-     *
      * @example
      * null
      */
@@ -36805,7 +36859,7 @@ export declare class ModifyInstanceVpcAttributeRequest extends $tea.Model {
      * By default, if this parameter is not specified, a private IP address is randomly assigned from the CIDR block of the specified vSwitch.
      *
      * @example
-     * 172.17.\*\*.**
+     * ``172.17.**.**``
      */
     privateIpAddress?: string;
     resourceOwnerAccount?: string;
@@ -37302,7 +37356,7 @@ export declare class ModifyLaunchTemplateDefaultVersionRequest extends $tea.Mode
 export declare class ModifyLaunchTemplateDefaultVersionResponseBody extends $tea.Model {
     /**
      * @remarks
-     * The ID of the launch template. For more information, see [DescribeLaunchTemplates](https://help.aliyun.com/document_detail/73759.html). You must specify `LaunchTemplateId` or `LaunchTemplateName` to specify a launch template.
+     * The ID of the launch template. For more information, see [DescribeLaunchTemplates](https://help.aliyun.com/document_detail/73759.html).
      *
      * @example
      * lt-bp1apo0bbbkuy0rj****
@@ -37531,6 +37585,7 @@ export declare class ModifyNetworkInterfaceAttributeRequest extends $tea.Model {
      * *   The new security groups take effect after a short delay.
      */
     securityGroupId?: string[];
+    sourceDestCheck?: boolean;
     /**
      * @remarks
      * The Tx queue depth of the ENI.
@@ -39713,6 +39768,78 @@ export declare class ModifyVpcAttributeResponse extends $tea.Model {
         [key: string]: any;
     });
 }
+export declare class PurchaseElasticityAssuranceRequest extends $tea.Model {
+    privatePoolOptions?: PurchaseElasticityAssuranceRequestPrivatePoolOptions;
+    /**
+     * @example
+     * 123e4567-e89b-12d3-a456-426655440000
+     */
+    clientToken?: string;
+    /**
+     * @example
+     * 1
+     */
+    period?: number;
+    /**
+     * @example
+     * Month
+     */
+    periodUnit?: string;
+    /**
+     * @remarks
+     * This parameter is required.
+     *
+     * @example
+     * cn-hangzhou
+     */
+    regionId?: string;
+    /**
+     * @example
+     * 2024-06-18T00:00Z
+     */
+    startTime?: string;
+    static names(): {
+        [key: string]: string;
+    };
+    static types(): {
+        [key: string]: any;
+    };
+    constructor(map?: {
+        [key: string]: any;
+    });
+}
+export declare class PurchaseElasticityAssuranceResponseBody extends $tea.Model {
+    /**
+     * @example
+     * 473469C7-AA6F-4DC5-B3DB-A3DC0DE3C83E
+     */
+    requestId?: string;
+    static names(): {
+        [key: string]: string;
+    };
+    static types(): {
+        [key: string]: any;
+    };
+    constructor(map?: {
+        [key: string]: any;
+    });
+}
+export declare class PurchaseElasticityAssuranceResponse extends $tea.Model {
+    headers?: {
+        [key: string]: string;
+    };
+    statusCode?: number;
+    body?: PurchaseElasticityAssuranceResponseBody;
+    static names(): {
+        [key: string]: string;
+    };
+    static types(): {
+        [key: string]: any;
+    };
+    constructor(map?: {
+        [key: string]: any;
+    });
+}
 export declare class PurchaseReservedInstancesOfferingRequest extends $tea.Model {
     /**
      * @remarks
@@ -40901,7 +41028,7 @@ export declare class ReleasePublicIpAddressRequest extends $tea.Model {
      * This parameter is required.
      *
      * @example
-     * 121.40.\*\*.**
+     * ``121.40.**.**``
      */
     publicIpAddress?: string;
     /**
@@ -42033,6 +42160,8 @@ export declare class ResetDiskResponse extends $tea.Model {
 export declare class ResetDiskDefaultKMSKeyIdRequest extends $tea.Model {
     /**
      * @remarks
+     * The ID of the region. You can call the DescribeRegions operation to query the most recent region list.
+     *
      * This parameter is required.
      *
      * @example
@@ -42052,6 +42181,9 @@ export declare class ResetDiskDefaultKMSKeyIdRequest extends $tea.Model {
 }
 export declare class ResetDiskDefaultKMSKeyIdResponseBody extends $tea.Model {
     /**
+     * @remarks
+     * The request ID.
+     *
      * @example
      * 473469C7-AA6F-4DC5-B3DB-A3DC0DE3C83E
      */
@@ -44115,7 +44247,7 @@ export declare class RunInstancesRequest extends $tea.Model {
      * >  The first IP address and last three IP addresses of each vSwitch CIDR block are reserved. You cannot specify the IP addresses. For example, if a vSwitch CIDR block is 192.168.1.0/24, the IP addresses 192.168.1.0, 192.168.1.253, 192.168.1.254, and 192.168.1.255 are reserved.
      *
      * @example
-     * 10.1.\*\*.**
+     * ``10.1.**.**``
      */
     privateIpAddress?: string;
     /**
@@ -45647,7 +45779,7 @@ export declare class UnassignPrivateIpAddressesRequest extends $tea.Model {
      * The secondary private IP addresses to unassign.
      *
      * @example
-     * 192.168.\*\*.**
+     * ``192.168.**.**``
      */
     privateIpAddress?: string[];
     /**
@@ -49014,7 +49146,7 @@ export declare class CreateLaunchTemplateRequestNetworkInterface extends $tea.Mo
      * >  You can attach only a single secondary ENI when you create an instance. After the instance is created, you can call the [CreateNetworkInterface](https://help.aliyun.com/document_detail/58504.html) and [AttachNetworkInterface](https://help.aliyun.com/document_detail/58515.html) operations to attach more secondary ENIs.
      *
      * @example
-     * 192.168.\*\*.**
+     * ``192.168.**.**``
      */
     primaryIpAddress?: string;
     /**
@@ -49074,7 +49206,7 @@ export declare class CreateLaunchTemplateRequestNetworkInterface extends $tea.Mo
 export declare class CreateLaunchTemplateRequestTag extends $tea.Model {
     /**
      * @remarks
-     * The key of tag N to add to the instance, disks, and primary ENI. Valid values of N: 1 to 20. The tag key cannot be an empty string. The tag key can be up to 128 characters in length and cannot contain http:// or https://. The tag key cannot start with acs: or aliyun.
+     * The key of tag N to add to the instance, disks, and primary ENI that are created from the launch template. Valid values of N: 1 to 20. The tag key cannot be an empty string. The tag key can be up to 128 characters in length and cannot contain http:// or https://. The tag key cannot start with acs: or aliyun.
      *
      * @example
      * TestKey
@@ -49082,7 +49214,7 @@ export declare class CreateLaunchTemplateRequestTag extends $tea.Model {
     key?: string;
     /**
      * @remarks
-     * The value of tag N to add to the instance, disks, and primary ENI. Valid values of N: 1 to 20. The tag value can be an empty string. The tag value can be up to 128 characters in length and cannot contain http:// or https://.
+     * The value of tag N to add to the instance, disks, and primary ENI that are created from the launch template. Valid values of N: 1 to 20. The tag value can be an empty string. The tag value can be up to 128 characters in length and cannot contain http:// or https://.
      *
      * @example
      * TestValue
@@ -49473,7 +49605,7 @@ export declare class CreateLaunchTemplateVersionRequestNetworkInterface extends
      * The primary private IP address of the secondary ENI. The value of N in `NetworkInterface.N` cannot be greater than 1.
      *
      * @example
-     * 192.168.\*\*.**
+     * ``192.168.**.**``
      */
     primaryIpAddress?: string;
     /**
@@ -49517,7 +49649,7 @@ export declare class CreateLaunchTemplateVersionRequestNetworkInterface extends
 export declare class CreateLaunchTemplateVersionRequestTag extends $tea.Model {
     /**
      * @remarks
-     * The key of tag N to add to the instance, disks, and primary ENI. Valid values of N: 1 to 20. The tag key cannot be an empty string. The tag key can be up to 128 characters in length and cannot contain http:// or https://. The tag key cannot start with acs: or aliyun.
+     * The key of tag N to add to the ECS instance, disks, and primary ENI created based on the launch template version. Valid values of N: 1 to 20. The tag key cannot be an empty string. The tag key can be up to 128 characters in length and cannot contain http:// or https://. The tag key cannot start with acs: or aliyun.
      *
      * @example
      * TestKey
@@ -49525,7 +49657,7 @@ export declare class CreateLaunchTemplateVersionRequestTag extends $tea.Model {
     key?: string;
     /**
      * @remarks
-     * The value of tag N to add to the instance, disks, and primary ENI. Valid values of N: 1 to 20. The tag value can be an empty string. The tag value can be up to 128 characters in length and cannot contain http:// or https://.
+     * The value of tag N to add to the ECS instance, disks, and primary ENI created based on the launch template version. Valid values of N: 1 to 20. The tag value can be an empty string. The tag value can be up to 128 characters in length and cannot contain http:// or https://.
      *
      * @example
      * TestValue
@@ -49818,7 +49950,7 @@ export declare class CreateNetworkInterfaceResponseBodyPrivateIpSetsPrivateIpSet
      * The private IP address of the instance.
      *
      * @example
-     * 172.17.\*\*.**
+     * ``172.17.**.**``
      */
     privateIpAddress?: string;
     static names(): {
@@ -50392,7 +50524,7 @@ export declare class DeregisterManagedInstanceResponseBodyInstance extends $tea.
      * The public IP address of the managed instance.
      *
      * @example
-     * 47.8.\*\*.**
+     * ``47.8.**.**``
      */
     internetIp?: string;
     /**
@@ -50400,7 +50532,7 @@ export declare class DeregisterManagedInstanceResponseBodyInstance extends $tea.
      * The internal IP address of the managed instance.
      *
      * @example
-     * 10.0.\*\*.**
+     * ``10.0.**.**``
      */
     intranetIp?: string;
     /**
@@ -58492,6 +58624,9 @@ export declare class DescribeImagesResponseBodyImagesImage extends $tea.Model {
      *
      * *   BIOS: Basic Input/Output System (BIOS)
      * *   UEFI: Unified Extensible Firmware Interface (UEFI)
+     * *   UEFI-Preferred: BIOS and UEFI
+     *
+     * For information about the image boot modes, see [Image boot modes](~~2244655#b9caa9b8bb1wf~~).
      *
      * @example
      * BIOS
@@ -58706,6 +58841,8 @@ export declare class DescribeImagesResponseBodyImagesImage extends $tea.Model {
      * @remarks
      * The size of the image. Unit: GiB.
      *
+     * >  If the image contains data disk snapshots, this parameter indicates only the size of the system disk snapshot contained in the image.
+     *
      * @example
      * 60
      */
@@ -58882,7 +59019,7 @@ export declare class DescribeInstanceAttributeResponseBodyEipAddress extends $te
      * The ID of the elastic IP address (EIP).
      *
      * @example
-     * 30.21.\*\*.**
+     * ``30.21.**.**``
      */
     ipAddress?: string;
     static names(): {
@@ -58986,7 +59123,7 @@ export declare class DescribeInstanceAttributeResponseBodyVpcAttributes extends
      * The NAT IP address of the instance. It is used by ECS instances in different VPCs for communication.
      *
      * @example
-     * 172.17.\*\*.**
+     * ``172.17.**.**``
      */
     natIpAddress?: string;
     /**
@@ -60207,9 +60344,6 @@ export declare class DescribeInstanceTypeFamiliesResponseBodyInstanceTypeFamilie
 export declare class DescribeInstanceTypesResponseBodyInstanceTypesInstanceTypeEnhancedNetwork extends $tea.Model {
     /**
      * @remarks
-     * *
-     * *
-     *
      * >  This parameter is not publicly available.
      *
      * @example
@@ -60880,7 +61014,7 @@ export declare class DescribeInstancesResponseBodyInstancesInstanceEipAddress ex
      * The EIP.
      *
      * @example
-     * 42.112.\*\*.**
+     * ``42.112.**.**``
      */
     ipAddress?: string;
     /**
@@ -61110,7 +61244,7 @@ export declare class DescribeInstancesResponseBodyInstancesInstanceNetworkInterf
      * The private IP address of the ENI.
      *
      * @example
-     * 172.17.\*\*.**
+     * ``172.17.**.**``
      */
     privateIpAddress?: string;
     static names(): {
@@ -61172,7 +61306,7 @@ export declare class DescribeInstancesResponseBodyInstancesInstanceNetworkInterf
      * The primary private IP address of the ENI.
      *
      * @example
-     * 172.17.\*\*.***
+     * ``172.17.**.**``*
      */
     primaryIpAddress?: string;
     /**
@@ -61402,7 +61536,7 @@ export declare class DescribeInstancesResponseBodyInstancesInstanceVpcAttributes
      * The NAT IP address of the instance. The NAT IP address is used by ECS instances in different VPCs for communication.
      *
      * @example
-     * 172.17.\*\*.**
+     * ``172.17.**.**``
      */
     natIpAddress?: string;
     /**
@@ -64013,7 +64147,7 @@ export declare class DescribeLaunchTemplateVersionsResponseBodyLaunchTemplateVer
      * The private IP address to assign to the instance.
      *
      * @example
-     * 10.1.\*\*.**
+     * ``10.1.**.**``
      */
     privateIpAddress?: string;
     /**
@@ -64234,7 +64368,9 @@ export declare class DescribeLaunchTemplateVersionsResponseBodyLaunchTemplateVer
 export declare class DescribeLaunchTemplatesRequestTemplateTag extends $tea.Model {
     /**
      * @remarks
-     * The value of tag N of the launch template. Valid values of N: 1 to 20.
+     * The key of tag N of the launch template. Valid values of N: 1 to 20.
+     *
+     * If you specify a single tag to query resources, up to 1,000 resources to which the tag is added are returned. If you specify multiple tags to query resources, up to 1,000 resources to which all specified tags are added are returned. To query more than 1,000 resources that have specified tags added, call the [ListTagResources](https://help.aliyun.com/document_detail/110425.html) operation.
      *
      * @example
      * TestKey
@@ -64242,9 +64378,7 @@ export declare class DescribeLaunchTemplatesRequestTemplateTag extends $tea.Mode
     key?: string;
     /**
      * @remarks
-     * The number of the page to return. Pages start from page 1.
-     *
-     * Default value: 1.
+     * The value of tag N of the launch template. Valid values of N: 1 to 20.
      *
      * @example
      * TestValue
@@ -64262,13 +64396,16 @@ export declare class DescribeLaunchTemplatesRequestTemplateTag extends $tea.Mode
 }
 export declare class DescribeLaunchTemplatesResponseBodyLaunchTemplateSetsLaunchTemplateSetTagsTag extends $tea.Model {
     /**
+     * @remarks
+     * The tag value of the launch template.
+     *
      * @example
      * TestKey
      */
     tagKey?: string;
     /**
      * @remarks
-     * The key of tag N of the launch template.
+     * The tag key of the launch template.
      *
      * @example
      * TestValue
@@ -64299,7 +64436,9 @@ export declare class DescribeLaunchTemplatesResponseBodyLaunchTemplateSetsLaunch
 export declare class DescribeLaunchTemplatesResponseBodyLaunchTemplateSetsLaunchTemplateSet extends $tea.Model {
     /**
      * @remarks
-     * The ID of the resource group to which the launch template belongs.
+     * The time when the launch template was created.
+     *
+     * The time follows the ISO 8601 standard in the yyyy-MM-ddTHH:mm:ssZ format. The time is displayed in UTC.
      *
      * @example
      * 2018-05-14T14:18:00Z
@@ -64307,7 +64446,7 @@ export declare class DescribeLaunchTemplatesResponseBodyLaunchTemplateSetsLaunch
     createTime?: string;
     /**
      * @remarks
-     * The latest version number of the launch template.
+     * The ID of the Alibaba Cloud account that created the launch template.
      *
      * @example
      * 1234567890
@@ -64347,7 +64486,9 @@ export declare class DescribeLaunchTemplatesResponseBodyLaunchTemplateSetsLaunch
     launchTemplateName?: string;
     /**
      * @remarks
-     * The ID of the launch template.
+     * The time when a version was added to or deleted from the launch template.
+     *
+     * The time follows the ISO 8601 standard in the yyyy-MM-ddTHH:mm:ssZ format. The time is displayed in UTC.
      *
      * @example
      * 2018-05-14T14:18:00Z
@@ -64363,7 +64504,9 @@ export declare class DescribeLaunchTemplatesResponseBodyLaunchTemplateSetsLaunch
     resourceGroupId?: string;
     /**
      * @remarks
-     * The tag of the launch template.
+     * The tags of the launch template.
+     *
+     * >  You can only call API operations to add tags to and query the tags of a launch template. You cannot add tags to or view the tags of a launch template in the ECS console.
      */
     tags?: DescribeLaunchTemplatesResponseBodyLaunchTemplateSetsLaunchTemplateSetTags;
     static names(): {
@@ -64511,7 +64654,7 @@ export declare class DescribeManagedInstancesResponseBodyInstances extends $tea.
      * The public IP address of the managed instance.
      *
      * @example
-     * 40.65.\*\*.**
+     * ``40.65.**.**``
      */
     internetIp?: string;
     /**
@@ -64519,7 +64662,7 @@ export declare class DescribeManagedInstancesResponseBodyInstances extends $tea.
      * The internal IP address of the managed instance.
      *
      * @example
-     * 10.0.\*\*.**
+     * ``10.0.**.**``
      */
     intranetIp?: string;
     /**
@@ -64693,7 +64836,7 @@ export declare class DescribeNetworkInterfaceAttributeResponseBodyAssociatedPubl
      * The EIP.
      *
      * @example
-     * 116.62.\*\*.**
+     * ``116.62.**.**``
      */
     publicIpAddress?: string;
     static names(): {
@@ -65033,7 +65176,7 @@ export declare class DescribeNetworkInterfaceAttributeResponseBodyPrivateIpSetsP
      * The EIP.
      *
      * @example
-     * 116.62.\*\*.**
+     * ``116.62.**.**``
      */
     publicIpAddress?: string;
     static names(): {
@@ -65068,7 +65211,7 @@ export declare class DescribeNetworkInterfaceAttributeResponseBodyPrivateIpSetsP
      * The private IP address of the ENI.
      *
      * @example
-     * 172.17.\*\*.**
+     * ``172.17.**.**``
      */
     privateIpAddress?: string;
     static names(): {
@@ -65298,7 +65441,7 @@ export declare class DescribeNetworkInterfacesResponseBodyNetworkInterfaceSetsNe
      * The EIP.
      *
      * @example
-     * 116.62.\*\*.**
+     * ``116.62.**.**``
      */
     publicIpAddress?: string;
     static names(): {
@@ -65464,7 +65607,7 @@ export declare class DescribeNetworkInterfacesResponseBodyNetworkInterfaceSetsNe
      * The EIP.
      *
      * @example
-     * 116.62.\*\*.**
+     * ``116.62.**.**``
      */
     publicIpAddress?: string;
     static names(): {
@@ -65507,7 +65650,7 @@ export declare class DescribeNetworkInterfacesResponseBodyNetworkInterfaceSetsNe
      * The private IP address of the ENI.
      *
      * @example
-     * 172.17.\*\*.**
+     * ``172.17.**.**``
      */
     privateIpAddress?: string;
     static names(): {
@@ -65696,7 +65839,7 @@ export declare class DescribeNetworkInterfacesResponseBodyNetworkInterfaceSetsNe
      * The primary private IP address of the ENI.
      *
      * @example
-     * 172.17.\*\*.**
+     * ``172.17.**.**``
      */
     privateIpAddress?: string;
     /**
@@ -65754,6 +65897,7 @@ export declare class DescribeNetworkInterfacesResponseBodyNetworkInterfaceSetsNe
      * true
      */
     serviceManaged?: boolean;
+    sourceDestCheck?: boolean;
     /**
      * @remarks
      * The state of the ENI.
@@ -66733,7 +66877,7 @@ export declare class DescribeRegionsResponseBodyRegionsRegion extends $tea.Model
     regionEndpoint?: string;
     /**
      * @remarks
-     * The region ID.
+     * The ID of the region.
      *
      * @example
      * cn-qingdao-et2-bo1
@@ -68289,6 +68433,7 @@ export declare class DescribeSecurityGroupsResponseBodySecurityGroupsSecurityGro
      * 0
      */
     ecsCount?: number;
+    groupToGroupRuleCount?: number;
     /**
      * @remarks
      * The ID of the resource group to which the security group belongs.
@@ -68297,6 +68442,7 @@ export declare class DescribeSecurityGroupsResponseBodySecurityGroupsSecurityGro
      * rg-bp67acfmxazb4p****
      */
     resourceGroupId?: string;
+    ruleCount?: number;
     /**
      * @remarks
      * The ID of the security group.
@@ -73158,6 +73304,30 @@ export declare class ModifyReservedInstancesResponseBodyReservedInstanceIdSets e
         [key: string]: any;
     });
 }
+export declare class PurchaseElasticityAssuranceRequestPrivatePoolOptions extends $tea.Model {
+    /**
+     * @remarks
+     * This parameter is required.
+     *
+     * @example
+     * eap-bp67acfmxazb4****
+     */
+    id?: string;
+    /**
+     * @example
+     * Open
+     */
+    matchCriteria?: string;
+    static names(): {
+        [key: string]: string;
+    };
+    static types(): {
+        [key: string]: any;
+    };
+    constructor(map?: {
+        [key: string]: any;
+    });
+}
 export declare class PurchaseReservedInstancesOfferingRequestTag extends $tea.Model {
     /**
      * @remarks
@@ -74931,7 +75101,7 @@ export declare class RunInstancesRequestNetworkInterface extends $tea.Model {
      * *   The first IP address and last three IP addresses of each vSwitch CIDR block are reserved. You cannot specify the IP addresses. For example, if a vSwitch CIDR block is 192.168.1.0/24, the following IP addresses are reserved: 192.168.1.0, 192.168.1.253, 192.168.1.254, and 192.168.1.255.
      *
      * @example
-     * 172.16.\*\*.**
+     * ``172.16.**.**``
      */
     primaryIpAddress?: string;
     /**
@@ -76612,7 +76782,7 @@ export default class Client extends OpenApi {
      */
     createHpcCluster(request: CreateHpcClusterRequest): Promise<CreateHpcClusterResponse>;
     /**
-     * Creates a custom image. After you call this operation to create a custom image, you can call the RunInstances operation to create Elastic Compute Service (ECS) instances from the created custom image or call the ReplaceSystemDisk operation to replace system disks by using the custom image.
+     * Creates a custom image. After you call this operation to create a custom image, you can call the RunInstances operation to create Elastic Compute Service (ECS) instances from the custom image or call the ReplaceSystemDisk operation to replace system disks by using the custom image.
      *
      * @remarks
      * ## [](#)Usage notes
@@ -76636,7 +76806,7 @@ export default class Client extends OpenApi {
      */
     createImageWithOptions(request: CreateImageRequest, runtime: $Util.RuntimeOptions): Promise<CreateImageResponse>;
     /**
-     * Creates a custom image. After you call this operation to create a custom image, you can call the RunInstances operation to create Elastic Compute Service (ECS) instances from the created custom image or call the ReplaceSystemDisk operation to replace system disks by using the custom image.
+     * Creates a custom image. After you call this operation to create a custom image, you can call the RunInstances operation to create Elastic Compute Service (ECS) instances from the custom image or call the ReplaceSystemDisk operation to replace system disks by using the custom image.
      *
      * @remarks
      * ## [](#)Usage notes
@@ -76848,13 +77018,12 @@ export default class Client extends OpenApi {
      * Creates a launch template. When you call this operation, you can specify parameters, such as TemplateTag, LaunchTemplateName, and ImageId, in the request. A launch template eliminates the need to configure a large number of parameters every time you create an Elastic Compute Service (ECS) instance.
      *
      * @remarks
-     * ## Description
-     * Launch templates contain preset configurations used to create instances, such as the region, image ID, instance type, security group ID, and public bandwidth settings. If a specific parameter is not included in a launch template, you must manually specify the parameter when you use the launch template to create an instance.
-     * After you create a launch template (`CreateLaunchTemplate`), its version number is set to 1 by default. You can create multiple versions (`CreateLaunchTemplateVersion`) for the launch template. Version numbers start from 1 and increment by one. If you do not specify a template version number when you use a launch template to create instances ([RunInstances](https://help.aliyun.com/document_detail/63440.html)), the default version is used.
-     * When you call this operation, take note of the following items:
-     * *   You can create up to 30 launch templates in each region. Each launch template can have up to 30 versions.
-     * *   Most parameters in launch templates are optional. When you create a launch template, ECS does not verify the existence or validity of specified parameter values. The validity of the parameter values are verified only when you use the launch template to create instances.
-     * *   If you set a specific parameter in a launch template, you cannot filter out this parameter when you use the launch template to create instances ([RunInstances](https://help.aliyun.com/document_detail/63440.html)). For example, if you set the `HostName` parameter to LocalHost in a launch template and do not set the `HostName` parameter when you call the `RunInstances` operation to create instances from the launch template, the created instance still has a hostname of `LocalHost`. If you want to overwrite the `LocalHost` value of HostName provided by the launch template, you can set `HostName` to MyHost or another value when you call the `RunInstances` operation.
+     * After you create a launch template by calling the CreateLaunchTemplate operation, a default version that has a version number of 1 is automatically generated for the launch template. You can call the `CreateLaunchTemplateVersion` operation to create additional versions for the launch template. Version numbers start from 1 and increment by 1. If you specify a launch template but do not specify a launch template version number when you call the [RunInstances](https://help.aliyun.com/document_detail/63440.html) operation to create instances, the default version of the launch template is used.
+     * Launch templates contain preset configurations that are used to create instances, such as the region ID, image ID, instance type, security group ID, and public bandwidth settings. If a specific parameter is not included in a launch template, you need to manually specify the parameter when you use the launch template to create instances.
+     * Take note of the following items:
+     * *   You can retain up to 30 launch templates in each region in your Alibaba Cloud account. Each launch template can have up to 30 versions.
+     * *   Most parameters in launch templates are optional. When you create a launch template, ECS does not verify the existence or validity of specified parameter values. The parameter values are verified only when you use the launch template to create instances.
+     * *   If you configured a specific parameter in a launch template, you cannot filter out the parameter when you call the [RunInstances](https://help.aliyun.com/document_detail/63440.html) operation to create instances from the launch template. For example, if you set `HostName` to LocalHost in a launch template but do not specify `HostName` when you call the `RunInstances` operation to create instances from the launch template, the hostname of the created instances is `LocalHost`. If you want to overwrite `LocalHost`, which is the value of HostName in the launch template, you can set `HostName` to MyHost or a different value when you call the `RunInstances` operation.
      *
      * @param request - CreateLaunchTemplateRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -76865,20 +77034,19 @@ export default class Client extends OpenApi {
      * Creates a launch template. When you call this operation, you can specify parameters, such as TemplateTag, LaunchTemplateName, and ImageId, in the request. A launch template eliminates the need to configure a large number of parameters every time you create an Elastic Compute Service (ECS) instance.
      *
      * @remarks
-     * ## Description
-     * Launch templates contain preset configurations used to create instances, such as the region, image ID, instance type, security group ID, and public bandwidth settings. If a specific parameter is not included in a launch template, you must manually specify the parameter when you use the launch template to create an instance.
-     * After you create a launch template (`CreateLaunchTemplate`), its version number is set to 1 by default. You can create multiple versions (`CreateLaunchTemplateVersion`) for the launch template. Version numbers start from 1 and increment by one. If you do not specify a template version number when you use a launch template to create instances ([RunInstances](https://help.aliyun.com/document_detail/63440.html)), the default version is used.
-     * When you call this operation, take note of the following items:
-     * *   You can create up to 30 launch templates in each region. Each launch template can have up to 30 versions.
-     * *   Most parameters in launch templates are optional. When you create a launch template, ECS does not verify the existence or validity of specified parameter values. The validity of the parameter values are verified only when you use the launch template to create instances.
-     * *   If you set a specific parameter in a launch template, you cannot filter out this parameter when you use the launch template to create instances ([RunInstances](https://help.aliyun.com/document_detail/63440.html)). For example, if you set the `HostName` parameter to LocalHost in a launch template and do not set the `HostName` parameter when you call the `RunInstances` operation to create instances from the launch template, the created instance still has a hostname of `LocalHost`. If you want to overwrite the `LocalHost` value of HostName provided by the launch template, you can set `HostName` to MyHost or another value when you call the `RunInstances` operation.
+     * After you create a launch template by calling the CreateLaunchTemplate operation, a default version that has a version number of 1 is automatically generated for the launch template. You can call the `CreateLaunchTemplateVersion` operation to create additional versions for the launch template. Version numbers start from 1 and increment by 1. If you specify a launch template but do not specify a launch template version number when you call the [RunInstances](https://help.aliyun.com/document_detail/63440.html) operation to create instances, the default version of the launch template is used.
+     * Launch templates contain preset configurations that are used to create instances, such as the region ID, image ID, instance type, security group ID, and public bandwidth settings. If a specific parameter is not included in a launch template, you need to manually specify the parameter when you use the launch template to create instances.
+     * Take note of the following items:
+     * *   You can retain up to 30 launch templates in each region in your Alibaba Cloud account. Each launch template can have up to 30 versions.
+     * *   Most parameters in launch templates are optional. When you create a launch template, ECS does not verify the existence or validity of specified parameter values. The parameter values are verified only when you use the launch template to create instances.
+     * *   If you configured a specific parameter in a launch template, you cannot filter out the parameter when you call the [RunInstances](https://help.aliyun.com/document_detail/63440.html) operation to create instances from the launch template. For example, if you set `HostName` to LocalHost in a launch template but do not specify `HostName` when you call the `RunInstances` operation to create instances from the launch template, the hostname of the created instances is `LocalHost`. If you want to overwrite `LocalHost`, which is the value of HostName in the launch template, you can set `HostName` to MyHost or a different value when you call the `RunInstances` operation.
      *
      * @param request - CreateLaunchTemplateRequest
      * @returns CreateLaunchTemplateResponse
      */
     createLaunchTemplate(request: CreateLaunchTemplateRequest): Promise<CreateLaunchTemplateResponse>;
     /**
-     * Creates a version for a launch template. When you call this operation, you can specify parameters, such as LaunchTemplateId, VersionDescription, and Tag, in the request.
+     * Creates a version for a launch template. You can use the created version to create Elastic Compute Service (ECS) instances, scaling groups, or auto provisioning groups. When you call this operation, you can specify parameters, such as LaunchTemplateId, VersionDescription, and Tag, in the request.
      *
      * @remarks
      * ## [](#)Usage notes
@@ -76890,7 +77058,7 @@ export default class Client extends OpenApi {
      */
     createLaunchTemplateVersionWithOptions(request: CreateLaunchTemplateVersionRequest, runtime: $Util.RuntimeOptions): Promise<CreateLaunchTemplateVersionResponse>;
     /**
-     * Creates a version for a launch template. When you call this operation, you can specify parameters, such as LaunchTemplateId, VersionDescription, and Tag, in the request.
+     * Creates a version for a launch template. You can use the created version to create Elastic Compute Service (ECS) instances, scaling groups, or auto provisioning groups. When you call this operation, you can specify parameters, such as LaunchTemplateId, VersionDescription, and Tag, in the request.
      *
      * @remarks
      * ## [](#)Usage notes
@@ -77660,7 +77828,7 @@ export default class Client extends OpenApi {
      */
     deleteInstance(request: DeleteInstanceRequest): Promise<DeleteInstanceResponse>;
     /**
-     * Releases pay-as-you-go instances or expired subscription instances.
+     * Releases one or more pay-as-you-go Elastic Compute Service (ECS) instances or expired subscription ECS instances.
      *
      * @remarks
      * ## [](#)Usage notes
@@ -77679,7 +77847,7 @@ export default class Client extends OpenApi {
      */
     deleteInstancesWithOptions(request: DeleteInstancesRequest, runtime: $Util.RuntimeOptions): Promise<DeleteInstancesResponse>;
     /**
-     * Releases pay-as-you-go instances or expired subscription instances.
+     * Releases one or more pay-as-you-go Elastic Compute Service (ECS) instances or expired subscription ECS instances.
      *
      * @remarks
      * ## [](#)Usage notes
@@ -77724,6 +77892,11 @@ export default class Client extends OpenApi {
     /**
      * Deletes a launch template. You can use the LaunchTemplateId or LaunchTemplateName parameter to specify the launch template that you want to delete from the specified region.
      *
+     * @remarks
+     * Take note of the following items:
+     * *   After you delete a launch template, Elastic Compute Service (ECS) instances created based on the launch template are not affected.
+     * *   After you delete a launch template, all versions of the launch template are deleted and cannot be restored. If you want to delete only a specific version of the launch template, call the [DeleteLaunchTemplateVersion](https://help.aliyun.com/document_detail/2679735.html) operation.
+     *
      * @param request - DeleteLaunchTemplateRequest
      * @param runtime - runtime options for this request RuntimeOptions
      * @returns DeleteLaunchTemplateResponse
@@ -77732,12 +77905,23 @@ export default class Client extends OpenApi {
     /**
      * Deletes a launch template. You can use the LaunchTemplateId or LaunchTemplateName parameter to specify the launch template that you want to delete from the specified region.
      *
+     * @remarks
+     * Take note of the following items:
+     * *   After you delete a launch template, Elastic Compute Service (ECS) instances created based on the launch template are not affected.
+     * *   After you delete a launch template, all versions of the launch template are deleted and cannot be restored. If you want to delete only a specific version of the launch template, call the [DeleteLaunchTemplateVersion](https://help.aliyun.com/document_detail/2679735.html) operation.
+     *
      * @param request - DeleteLaunchTemplateRequest
      * @returns DeleteLaunchTemplateResponse
      */
     deleteLaunchTemplate(request: DeleteLaunchTemplateRequest): Promise<DeleteLaunchTemplateResponse>;
     /**
-     * Deletes the versions of a launch template. You cannot call this operation to delete the default version of a launch template. To delete the default version, you must call the DeleteLaunchTemplate operation to delete the launch template and all versions of the launch template.
+     * Deletes versions of a launch template. When you call this operation, you can specify parameters, such as LaunchTemplateId and DeleteVersion, in the request.
+     *
+     * @remarks
+     * Take note of the following items:
+     * *   You cannot delete the default version of a launch template by calling this operation. To delete the default version of a launch template, you must delete the launch template.
+     * *   If the version of a launch template that you want to delete is the default version, call the [ModifyLaunchTemplateDefaultVersion](https://help.aliyun.com/document_detail/2679734.html) operation or go to the **Launch Templates** page in the Elastic Compute Service (ECS) console to change the default version to a different version, and then delete the original default version.
+     * *   After you delete a version of a launch template, the ECS instances that were created based on the version are not affected.
      *
      * @param request - DeleteLaunchTemplateVersionRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -77745,7 +77929,13 @@ export default class Client extends OpenApi {
      */
     deleteLaunchTemplateVersionWithOptions(request: DeleteLaunchTemplateVersionRequest, runtime: $Util.RuntimeOptions): Promise<DeleteLaunchTemplateVersionResponse>;
     /**
-     * Deletes the versions of a launch template. You cannot call this operation to delete the default version of a launch template. To delete the default version, you must call the DeleteLaunchTemplate operation to delete the launch template and all versions of the launch template.
+     * Deletes versions of a launch template. When you call this operation, you can specify parameters, such as LaunchTemplateId and DeleteVersion, in the request.
+     *
+     * @remarks
+     * Take note of the following items:
+     * *   You cannot delete the default version of a launch template by calling this operation. To delete the default version of a launch template, you must delete the launch template.
+     * *   If the version of a launch template that you want to delete is the default version, call the [ModifyLaunchTemplateDefaultVersion](https://help.aliyun.com/document_detail/2679734.html) operation or go to the **Launch Templates** page in the Elastic Compute Service (ECS) console to change the default version to a different version, and then delete the original default version.
+     * *   After you delete a version of a launch template, the ECS instances that were created based on the version are not affected.
      *
      * @param request - DeleteLaunchTemplateVersionRequest
      * @returns DeleteLaunchTemplateVersionResponse
@@ -78591,7 +78781,7 @@ export default class Client extends OpenApi {
      */
     describeDiagnosticReports(request: DescribeDiagnosticReportsRequest): Promise<DescribeDiagnosticReportsResponse>;
     /**
-     * 查询云盘默认加密加密密钥
+     * Queries the Key Management Service (KMS) key used for account-level default encryption of Elastic Block Storage (EBS) resources in a region.
      *
      * @param request - DescribeDiskDefaultKMSKeyIdRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -78599,14 +78789,14 @@ export default class Client extends OpenApi {
      */
     describeDiskDefaultKMSKeyIdWithOptions(request: DescribeDiskDefaultKMSKeyIdRequest, runtime: $Util.RuntimeOptions): Promise<DescribeDiskDefaultKMSKeyIdResponse>;
     /**
-     * 查询云盘默认加密加密密钥
+     * Queries the Key Management Service (KMS) key used for account-level default encryption of Elastic Block Storage (EBS) resources in a region.
      *
      * @param request - DescribeDiskDefaultKMSKeyIdRequest
      * @returns DescribeDiskDefaultKMSKeyIdResponse
      */
     describeDiskDefaultKMSKeyId(request: DescribeDiskDefaultKMSKeyIdRequest): Promise<DescribeDiskDefaultKMSKeyIdResponse>;
     /**
-     * 检查云盘默认加密开启状态
+     * Queries whether account-level default encryption of Elastic Block Storage (EBS) resources is enabled in a region.
      *
      * @param request - DescribeDiskEncryptionByDefaultStatusRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -78614,7 +78804,7 @@ export default class Client extends OpenApi {
      */
     describeDiskEncryptionByDefaultStatusWithOptions(request: DescribeDiskEncryptionByDefaultStatusRequest, runtime: $Util.RuntimeOptions): Promise<DescribeDiskEncryptionByDefaultStatusResponse>;
     /**
-     * 检查云盘默认加密开启状态
+     * Queries whether account-level default encryption of Elastic Block Storage (EBS) resources is enabled in a region.
      *
      * @param request - DescribeDiskEncryptionByDefaultStatusRequest
      * @returns DescribeDiskEncryptionByDefaultStatusResponse
@@ -79189,7 +79379,7 @@ export default class Client extends OpenApi {
      */
     describeInstanceRamRole(request: DescribeInstanceRamRoleRequest): Promise<DescribeInstanceRamRoleResponse>;
     /**
-     * Queries the status information of Elastic Compute Service (ECS) instances. When you call this operation, you can specify parameters, such as RegionId, ZoneId, and InstanceId, in the request.
+     * Queries the status of one or more Elastic Compute Service (ECS) instances.
      *
      * @remarks
      *   For information about the lifecycle states of an ECS instance, see [Instance states](https://help.aliyun.com/document_detail/25687.html).
@@ -79201,7 +79391,7 @@ export default class Client extends OpenApi {
      */
     describeInstanceStatusWithOptions(request: DescribeInstanceStatusRequest, runtime: $Util.RuntimeOptions): Promise<DescribeInstanceStatusResponse>;
     /**
-     * Queries the status information of Elastic Compute Service (ECS) instances. When you call this operation, you can specify parameters, such as RegionId, ZoneId, and InstanceId, in the request.
+     * Queries the status of one or more Elastic Compute Service (ECS) instances.
      *
      * @remarks
      *   For information about the lifecycle states of an ECS instance, see [Instance states](https://help.aliyun.com/document_detail/25687.html).
@@ -79510,7 +79700,7 @@ export default class Client extends OpenApi {
      */
     describeLaunchTemplateVersions(request: DescribeLaunchTemplateVersionsRequest): Promise<DescribeLaunchTemplateVersionsResponse>;
     /**
-     * Queries the information of one or more available launch templates, such as the total number of launch templates, launch template names, and launch template IDs. When you call this operation, you can specify parameters, such as TemplateTag, TemplateResourceGroupId, and LaunchTemplateId, in the request.
+     * Queries the information of one or more launch templates, such as the total number of launch templates, the creation time of each launch template, and the latest version number of each launch template. When you can this operation, you can specify parameters, such as TemplateTag, TemplateResourceGroupId, and LaunchTemplateId, in the request.
      *
      * @param request - DescribeLaunchTemplatesRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -79518,7 +79708,7 @@ export default class Client extends OpenApi {
      */
     describeLaunchTemplatesWithOptions(request: DescribeLaunchTemplatesRequest, runtime: $Util.RuntimeOptions): Promise<DescribeLaunchTemplatesResponse>;
     /**
-     * Queries the information of one or more available launch templates, such as the total number of launch templates, launch template names, and launch template IDs. When you call this operation, you can specify parameters, such as TemplateTag, TemplateResourceGroupId, and LaunchTemplateId, in the request.
+     * Queries the information of one or more launch templates, such as the total number of launch templates, the creation time of each launch template, and the latest version number of each launch template. When you can this operation, you can specify parameters, such as TemplateTag, TemplateResourceGroupId, and LaunchTemplateId, in the request.
      *
      * @param request - DescribeLaunchTemplatesRequest
      * @returns DescribeLaunchTemplatesResponse
@@ -79877,7 +80067,7 @@ export default class Client extends OpenApi {
      */
     describeResourceByTags(request: DescribeResourceByTagsRequest): Promise<DescribeResourceByTagsResponse>;
     /**
-     * Queries available resources in a specific zone when you upgrade or downgrade Elastic Compute Service (ECS) instance types or replace system disks.
+     * Queries available instance types or system disk categories in a specific zone before you change the instance type or system disk category of an Elastic Compute Service (ECS) instance.
      *
      * @remarks
      * ## Debugging
@@ -79889,7 +80079,7 @@ export default class Client extends OpenApi {
      */
     describeResourcesModificationWithOptions(request: DescribeResourcesModificationRequest, runtime: $Util.RuntimeOptions): Promise<DescribeResourcesModificationResponse>;
     /**
-     * Queries available resources in a specific zone when you upgrade or downgrade Elastic Compute Service (ECS) instance types or replace system disks.
+     * Queries available instance types or system disk categories in a specific zone before you change the instance type or system disk category of an Elastic Compute Service (ECS) instance.
      *
      * @remarks
      * ## Debugging
@@ -80667,7 +80857,10 @@ export default class Client extends OpenApi {
      */
     disableActivation(request: DisableActivationRequest): Promise<DisableActivationResponse>;
     /**
-     * 关闭云盘默认加密
+     * Disables account-level default encryption of Elastic Block Storage (EBS) resources in a region. After you disable account-level default encryption of EBS resources in a region, the encryption status of existing disks in the region does not change. When you create a disk, you can still choose to encrypt the disk.
+     *
+     * @remarks
+     * You can use only an Alibaba Cloud account to call this operation.
      *
      * @param request - DisableDiskEncryptionByDefaultRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -80675,7 +80868,10 @@ export default class Client extends OpenApi {
      */
     disableDiskEncryptionByDefaultWithOptions(request: DisableDiskEncryptionByDefaultRequest, runtime: $Util.RuntimeOptions): Promise<DisableDiskEncryptionByDefaultResponse>;
     /**
-     * 关闭云盘默认加密
+     * Disables account-level default encryption of Elastic Block Storage (EBS) resources in a region. After you disable account-level default encryption of EBS resources in a region, the encryption status of existing disks in the region does not change. When you create a disk, you can still choose to encrypt the disk.
+     *
+     * @remarks
+     * You can use only an Alibaba Cloud account to call this operation.
      *
      * @param request - DisableDiskEncryptionByDefaultRequest
      * @returns DisableDiskEncryptionByDefaultResponse
@@ -80727,7 +80923,12 @@ export default class Client extends OpenApi {
      */
     eipNotifyPaid(request: EipNotifyPaidRequest): Promise<EipNotifyPaidResponse>;
     /**
-     * 启用云盘默认加密
+     * Enables account-level default encryption of Elastic Block Storage (EBS) resources in a region. After you enable account-level default encryption of EBS resources in a region, new pay-as-you-go and subscription cloud disks in the region must be encrypted. You can use the default Key Management Service (KMS) key ID for account-level default encryption of EBS resources or specify other KMS key IDs to encrypt the cloud disks. The first time you enable account-level default encryption of EBS resources in a region, the service key in the region is automatically used to encrypt EBS resources. You can call the ModifyDiskDefaultKMSKeyId or ResetDiskDefaultKMSKeyId operation to change the KMS key ID used for account-level default encryption of EBS resources.
+     *
+     * @remarks
+     *   You can use only an Alibaba Cloud account to call the EnableDiskEncryptionByDefault operation.
+     * *   Before you call the EnableDiskEncryptionByDefault operation, you must activate KMS.
+     * *   After you enable the account-level default encryption feature of EBS resources, you can purchase only encrypted cloud disks. For more information, see the [Limits](https://help.aliyun.com/zh/ecs/user-guide/encryption-overview?#59e20ff07fko1) section of the "Encrypt cloud disks" topic.
      *
      * @param request - EnableDiskEncryptionByDefaultRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -80735,7 +80936,12 @@ export default class Client extends OpenApi {
      */
     enableDiskEncryptionByDefaultWithOptions(request: EnableDiskEncryptionByDefaultRequest, runtime: $Util.RuntimeOptions): Promise<EnableDiskEncryptionByDefaultResponse>;
     /**
-     * 启用云盘默认加密
+     * Enables account-level default encryption of Elastic Block Storage (EBS) resources in a region. After you enable account-level default encryption of EBS resources in a region, new pay-as-you-go and subscription cloud disks in the region must be encrypted. You can use the default Key Management Service (KMS) key ID for account-level default encryption of EBS resources or specify other KMS key IDs to encrypt the cloud disks. The first time you enable account-level default encryption of EBS resources in a region, the service key in the region is automatically used to encrypt EBS resources. You can call the ModifyDiskDefaultKMSKeyId or ResetDiskDefaultKMSKeyId operation to change the KMS key ID used for account-level default encryption of EBS resources.
+     *
+     * @remarks
+     *   You can use only an Alibaba Cloud account to call the EnableDiskEncryptionByDefault operation.
+     * *   Before you call the EnableDiskEncryptionByDefault operation, you must activate KMS.
+     * *   After you enable the account-level default encryption feature of EBS resources, you can purchase only encrypted cloud disks. For more information, see the [Limits](https://help.aliyun.com/zh/ecs/user-guide/encryption-overview?#59e20ff07fko1) section of the "Encrypt cloud disks" topic.
      *
      * @param request - EnableDiskEncryptionByDefaultRequest
      * @returns EnableDiskEncryptionByDefaultResponse
@@ -81476,7 +81682,7 @@ export default class Client extends OpenApi {
      */
     modifyBandwidthPackageSpec(request: ModifyBandwidthPackageSpecRequest): Promise<ModifyBandwidthPackageSpecResponse>;
     /**
-     * Modifies the information about a capacity reservation, including the name, description, release mode, and the total number of Elastic Compute Service (ECS) instances for which capacity is reserved.
+     * Modifies the information of a capacity reservation, including the name, description, release mode, and the total number of Elastic Compute Service (ECS) instances for which capacity is reserved.
      *
      * @param request - ModifyCapacityReservationRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -81484,7 +81690,7 @@ export default class Client extends OpenApi {
      */
     modifyCapacityReservationWithOptions(request: ModifyCapacityReservationRequest, runtime: $Util.RuntimeOptions): Promise<ModifyCapacityReservationResponse>;
     /**
-     * Modifies the information about a capacity reservation, including the name, description, release mode, and the total number of Elastic Compute Service (ECS) instances for which capacity is reserved.
+     * Modifies the information of a capacity reservation, including the name, description, release mode, and the total number of Elastic Compute Service (ECS) instances for which capacity is reserved.
      *
      * @param request - ModifyCapacityReservationRequest
      * @returns ModifyCapacityReservationResponse
@@ -81745,7 +81951,12 @@ export default class Client extends OpenApi {
      */
     modifyDiskChargeType(request: ModifyDiskChargeTypeRequest): Promise<ModifyDiskChargeTypeResponse>;
     /**
-     * 修改云盘默认加密加密密钥
+     * Changes the Key Management Service (KMS) key used for account-level default encryption in a region.
+     *
+     * @remarks
+     *   Only Alibaba Cloud accounts can call this operation.
+     * *   Before you can call this operation in a region, you must enable account-level default encryption of Elastic Block Storage (EBS) resources in the region.
+     * *   The first time you use a custom master key (CMK), you must use the AliyunECSDiskEncryptDefaultRole role to grant Elastic Compute Service (ECS) access to KMS resources. For more information, see [Grant access to KMS keys through RAM roles](https://help.aliyun.com/zh/ecs/access-ecs-encrypted-resources-through-the-ram-role?#b82bf8fbd42t8).
      *
      * @param request - ModifyDiskDefaultKMSKeyIdRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -81753,7 +81964,12 @@ export default class Client extends OpenApi {
      */
     modifyDiskDefaultKMSKeyIdWithOptions(request: ModifyDiskDefaultKMSKeyIdRequest, runtime: $Util.RuntimeOptions): Promise<ModifyDiskDefaultKMSKeyIdResponse>;
     /**
-     * 修改云盘默认加密加密密钥
+     * Changes the Key Management Service (KMS) key used for account-level default encryption in a region.
+     *
+     * @remarks
+     *   Only Alibaba Cloud accounts can call this operation.
+     * *   Before you can call this operation in a region, you must enable account-level default encryption of Elastic Block Storage (EBS) resources in the region.
+     * *   The first time you use a custom master key (CMK), you must use the AliyunECSDiskEncryptDefaultRole role to grant Elastic Compute Service (ECS) access to KMS resources. For more information, see [Grant access to KMS keys through RAM roles](https://help.aliyun.com/zh/ecs/access-ecs-encrypted-resources-through-the-ram-role?#b82bf8fbd42t8).
      *
      * @param request - ModifyDiskDefaultKMSKeyIdRequest
      * @returns ModifyDiskDefaultKMSKeyIdResponse
@@ -81915,7 +82131,7 @@ export default class Client extends OpenApi {
      */
     modifyHpcClusterAttribute(request: ModifyHpcClusterAttributeRequest): Promise<ModifyHpcClusterAttributeResponse>;
     /**
-     * Modifies the name, description, status, or image family of a custom image.
+     * Modifies the attributes of a custom image, such as the image family, name, boot mode, and status and whether the image supports the Non-Volatile Memory Express (NVMe) protocol. When you call this operation, you can specify parameters, such as ImageId and ImageFamily, in the request.
      *
      * @param request - ModifyImageAttributeRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -81923,7 +82139,7 @@ export default class Client extends OpenApi {
      */
     modifyImageAttributeWithOptions(request: ModifyImageAttributeRequest, runtime: $Util.RuntimeOptions): Promise<ModifyImageAttributeResponse>;
     /**
-     * Modifies the name, description, status, or image family of a custom image.
+     * Modifies the attributes of a custom image, such as the image family, name, boot mode, and status and whether the image supports the Non-Volatile Memory Express (NVMe) protocol. When you call this operation, you can specify parameters, such as ImageId and ImageFamily, in the request.
      *
      * @param request - ModifyImageAttributeRequest
      * @returns ModifyImageAttributeResponse
@@ -82467,7 +82683,7 @@ export default class Client extends OpenApi {
      */
     modifyInvocationAttribute(request: ModifyInvocationAttributeRequest): Promise<ModifyInvocationAttributeResponse>;
     /**
-     * Changes the default version of a launch template. If you do not specify a version number for a launch template when you create instances by calling the RunInstances operation, the default version of the launch template is used.
+     * Changes the default version of a launch template. When you call this operation, you can specify DefaultVersionNumber in the request. If you do not specify a version when you create Elastic Compute Service (ECS) instances based on a launch template, the default version of the launch template is used.
      *
      * @remarks
      * ## Debugging
@@ -82479,7 +82695,7 @@ export default class Client extends OpenApi {
      */
     modifyLaunchTemplateDefaultVersionWithOptions(request: ModifyLaunchTemplateDefaultVersionRequest, runtime: $Util.RuntimeOptions): Promise<ModifyLaunchTemplateDefaultVersionResponse>;
     /**
-     * Changes the default version of a launch template. If you do not specify a version number for a launch template when you create instances by calling the RunInstances operation, the default version of the launch template is used.
+     * Changes the default version of a launch template. When you call this operation, you can specify DefaultVersionNumber in the request. If you do not specify a version when you create Elastic Compute Service (ECS) instances based on a launch template, the default version of the launch template is used.
      *
      * @remarks
      * ## Debugging
@@ -82942,6 +83158,21 @@ export default class Client extends OpenApi {
      * @returns ModifyVpcAttributeResponse
      */
     modifyVpcAttribute(request: ModifyVpcAttributeRequest): Promise<ModifyVpcAttributeResponse>;
+    /**
+     * 购买一个准备完毕的弹性保障包
+     *
+     * @param request - PurchaseElasticityAssuranceRequest
+     * @param runtime - runtime options for this request RuntimeOptions
+     * @returns PurchaseElasticityAssuranceResponse
+     */
+    purchaseElasticityAssuranceWithOptions(request: PurchaseElasticityAssuranceRequest, runtime: $Util.RuntimeOptions): Promise<PurchaseElasticityAssuranceResponse>;
+    /**
+     * 购买一个准备完毕的弹性保障包
+     *
+     * @param request - PurchaseElasticityAssuranceRequest
+     * @returns PurchaseElasticityAssuranceResponse
+     */
+    purchaseElasticityAssurance(request: PurchaseElasticityAssuranceRequest): Promise<PurchaseElasticityAssuranceResponse>;
     /**
      * Purchases a reserved instance. When you call this operation, you can specify parameters, such as InstanceType and Scope, in the request. Reserved instances can be applied to automatically offset fees for pay-as-you-go Elastic Compute Service (ECS) instances.
      *
@@ -83489,7 +83720,11 @@ export default class Client extends OpenApi {
      */
     resetDisk(request: ResetDiskRequest): Promise<ResetDiskResponse>;
     /**
-     * 重置云盘默认加密加密密钥为服务密钥
+     * Resets the Key Management Service (KMS) key used for account-level default encryption in a region to the service key.
+     *
+     * @remarks
+     *   Only Alibaba Cloud accounts can call this operation.
+     * *   Before you can call this operation in a region, you must enable account-level default encryption of Elastic Block Storage (EBS) resources in the region.
      *
      * @param request - ResetDiskDefaultKMSKeyIdRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -83497,7 +83732,11 @@ export default class Client extends OpenApi {
      */
     resetDiskDefaultKMSKeyIdWithOptions(request: ResetDiskDefaultKMSKeyIdRequest, runtime: $Util.RuntimeOptions): Promise<ResetDiskDefaultKMSKeyIdResponse>;
     /**
-     * 重置云盘默认加密加密密钥为服务密钥
+     * Resets the Key Management Service (KMS) key used for account-level default encryption in a region to the service key.
+     *
+     * @remarks
+     *   Only Alibaba Cloud accounts can call this operation.
+     * *   Before you can call this operation in a region, you must enable account-level default encryption of Elastic Block Storage (EBS) resources in the region.
      *
      * @param request - ResetDiskDefaultKMSKeyIdRequest
      * @returns ResetDiskDefaultKMSKeyIdResponse