@alicloud/ecd20200930 4.25.4 → 4.25.5

package/dist/models/ModifyCenterPolicyRequest.d.ts

@@ -2,7 +2,7 @@ import * as $dara from '@darabonba/typescript';
 export declare class ModifyCenterPolicyRequestAuthorizeAccessPolicyRule extends $dara.Model {
     /**
      * @remarks
-     * The client CIDR block from which end users can connect to cloud computers. Specify an IPv4 CIDR block.
+     * Client access IP address range. Specify an IPv4 CIDr block.
      *
      * @example
      * 47.100.XX.XX/16
@@ -10,7 +10,7 @@ export declare class ModifyCenterPolicyRequestAuthorizeAccessPolicyRule extends
     cidrIp?: string;
     /**
      * @remarks
-     * The description of the client IP address whitelist.
+     * Description of the client IP address whitelist.
      *
      * @example
      * test
@@ -30,7 +30,7 @@ export declare class ModifyCenterPolicyRequestAuthorizeAccessPolicyRule extends
 export declare class ModifyCenterPolicyRequestAuthorizeSecurityPolicyRule extends $dara.Model {
     /**
      * @remarks
-     * The object of the security group rule. Specify an IPv4 CIDR block.
+     * Target of the security group control rule. Specify an IPv4 CIDR block.
      *
      * @example
      * 47.100.XX.XX/16
@@ -38,7 +38,7 @@ export declare class ModifyCenterPolicyRequestAuthorizeSecurityPolicyRule extend
     cidrIp?: string;
     /**
      * @remarks
-     * The description of the security group rule.
+     * Description of the security group control rule.
      *
      * @example
      * test
@@ -46,15 +46,7 @@ export declare class ModifyCenterPolicyRequestAuthorizeSecurityPolicyRule extend
     description?: string;
     /**
      * @remarks
-     * The protocol type of the security group rule.
-     *
-     * Valid values:
-     *
-     * *   TCP: the Transmission Control Protocol (TCP) protocol.
-     * *   UDP: the User Datagram Protocol (UDP) protocol.
-     * *   ALL: any type of protocol.
-     * *   GRE: the Generic Routing Encapsulation (GRE) protocol.
-     * *   ICMP: the Internet Control Message Protocol (ICMP) for (IPv4).
+     * Protocol type for the security group control rule.
      *
      * @example
      * TCP
@@ -62,12 +54,7 @@ export declare class ModifyCenterPolicyRequestAuthorizeSecurityPolicyRule extend
     ipProtocol?: string;
     /**
      * @remarks
-     * The authorization policy of the security group rule.
-     *
-     * Valid values:
-     *
-     * *   drop: denies all access requests. If no \\"\\"access denied\\"\\" messages are returned, the requests either timed out or failed.
-     * *   accept (default): accepts all requests.
+     * Authorization policy for the security group control rule.
      *
      * @example
      * accept
@@ -75,14 +62,17 @@ export declare class ModifyCenterPolicyRequestAuthorizeSecurityPolicyRule extend
     policy?: string;
     /**
      * @remarks
-     * The port range of the security group rule. The value range of this parameter varies based on the value of IpProtocol.
+     * Port range for the security group control rule. The port range depends on the protocol (IpProtocol):
+     *
+     * - For TCP or UDP protocols: Port range is 1 to 65535. Separate the start and end ports with a forward slash (/). Example: 1/200.
+     *
+     * - For ICMP protocol: Set to -1/-1.
      *
-     * *   If IpProtocol is set to TCP or UDP, the port range is 1 to 65535. Separate the start port number and the end port number with a forward slash (/). Example: 1/200.
-     * *   If IpProtocol is set to ICMP, set the value to -1/-1.
-     * *   If IpProtocol is set to GRE, set the value to -1/-1.
-     * *   If IpProtocol is set to ALL, set the value to -1/-1.
+     * - For GRE protocol: Set to -1/-1.
      *
-     * For more information about the common ports, see [Common ports](https://help.aliyun.com/document_detail/40724.html).
+     * - When IpProtocol is set to all: Set to -1/-1.
+     *
+     * For more information about common ports for typical applications, see [Common ports](https://help.aliyun.com/document_detail/40724.html).
      *
      * @example
      * 22/22
@@ -90,7 +80,7 @@ export declare class ModifyCenterPolicyRequestAuthorizeSecurityPolicyRule extend
     portRange?: string;
     /**
      * @remarks
-     * The priority of the security group rule. A smaller value specifies a higher priority. Valid values: 1 to 60. Default value: 1.
+     * Priority of the security group control rule. A smaller number indicates a higher priority. Valid values: 1 to 60. Default value: 1.
      *
      * @example
      * 1
@@ -98,12 +88,7 @@ export declare class ModifyCenterPolicyRequestAuthorizeSecurityPolicyRule extend
     priority?: string;
     /**
      * @remarks
-     * The direction of the security group rule.
-     *
-     * Valid values:
-     *
-     * *   outflow: outbound.
-     * *   inflow: inbound.
+     * Rule direction for the security group control rule.
      *
      * @example
      * inflow
@@ -123,15 +108,7 @@ export declare class ModifyCenterPolicyRequestAuthorizeSecurityPolicyRule extend
 export declare class ModifyCenterPolicyRequestClientType extends $dara.Model {
     /**
      * @remarks
-     * The type of the Alibaba Cloud Workspace client that end users can use to connect to cloud computers.
-     *
-     * Valid values:
-     *
-     * *   html5: the web client.
-     * *   android: the Android client.
-     * *   ios: the iOS client.
-     * *   windows: the Windows client.
-     * *   macos: the macOS client.
+     * Client login control. Specifies the client type.
      *
      * @example
      * android
@@ -139,14 +116,9 @@ export declare class ModifyCenterPolicyRequestClientType extends $dara.Model {
     clientType?: string;
     /**
      * @remarks
-     * Specifies whether end users can use the specified type of Alibaba Cloud Workspace client to connect to cloud computers.
-     *
-     * >  If you don\\"t specify `ClientType`, any client can be used to connect to cloud computers.
+     * Client login control. Specifies whether to allow using a specific client type to log on to cloud computers.
      *
-     * Valid values:
-     *
-     * *   off: End users cannot use the specified type of Alibaba Cloud Workspace client to connect to cloud computers.
-     * *   on: End users can use the specified type of Alibaba Cloud Workspace client to connect to cloud computers.
+     * > If you don\\"t configure `ClientType` parameters, all client types are allowed by default.
      *
      * @example
      * off
@@ -186,15 +158,7 @@ export declare class ModifyCenterPolicyRequestClipboardGraineds extends $dara.Mo
 export declare class ModifyCenterPolicyRequestDeviceRedirects extends $dara.Model {
     /**
      * @remarks
-     * The peripheral type.
-     *
-     * Valid values:
-     *
-     * *   printer
-     * *   scanner
-     * *   serialport
-     * *   camera
-     * *   adb
+     * Peripheral type.
      *
      * @example
      * camera
@@ -202,13 +166,7 @@ export declare class ModifyCenterPolicyRequestDeviceRedirects extends $dara.Mode
     deviceType?: string;
     /**
      * @remarks
-     * The redirection type.
-     *
-     * Valid values:
-     *
-     * *   deviceRedirect: device redirection
-     * *   usbRedirect: USB redirection.
-     * *   off: any type of redirection.
+     * Redirection type.
      *
      * @example
      * deviceRedirect
@@ -228,7 +186,7 @@ export declare class ModifyCenterPolicyRequestDeviceRedirects extends $dara.Mode
 export declare class ModifyCenterPolicyRequestDeviceRules extends $dara.Model {
     /**
      * @remarks
-     * The device name.
+     * Device name.
      *
      * @example
      * sandisk
@@ -236,7 +194,7 @@ export declare class ModifyCenterPolicyRequestDeviceRules extends $dara.Model {
     deviceName?: string;
     /**
      * @remarks
-     * The product ID (PID).
+     * Product ID.
      *
      * @example
      * 0x55b1
@@ -244,19 +202,7 @@ export declare class ModifyCenterPolicyRequestDeviceRules extends $dara.Model {
     devicePid?: string;
     /**
      * @remarks
-     * The peripheral type.
-     *
-     * Valid values:
-     *
-     * *   usbKey: UKeys.
-     * *   other: other peripheral devices.
-     * *   graphicsTablet: graphics tablets.
-     * *   cardReader: card readers.
-     * *   printer: printers.
-     * *   scanner: scanners.
-     * *   storage: storage devices.
-     * *   camera: web cameras.
-     * *   networkInterfaceCard: NIC devices.
+     * Peripheral type.
      *
      * @example
      * storage
@@ -264,7 +210,7 @@ export declare class ModifyCenterPolicyRequestDeviceRules extends $dara.Model {
     deviceType?: string;
     /**
      * @remarks
-     * The vendor ID (VID). For more information, see [Valid USB VIDs](https://www.usb.org/sites/default/files/vendor_ids032322.pdf_1.pdf).
+     * Vendor ID. For more information, see [Valid USB Vendor IDs (VIDs)](https://www.usb.org/sites/default/files/vendor_ids032322.pdf_1.pdf).
      *
      * @example
      * 0x0781
@@ -272,7 +218,7 @@ export declare class ModifyCenterPolicyRequestDeviceRules extends $dara.Model {
     deviceVid?: string;
     /**
      * @remarks
-     * The link optimization command.
+     * Link optimization command.
      *
      * @example
      * 2:0
@@ -281,13 +227,7 @@ export declare class ModifyCenterPolicyRequestDeviceRules extends $dara.Model {
     platforms?: string;
     /**
      * @remarks
-     * The redirection type.
-     *
-     * Valid values:
-     *
-     * *   deviceRedirect: device redirection.
-     * *   usbRedirect: USB redirection.
-     * *   off: redirection disabled.
+     * Redirection type.
      *
      * @example
      * usbRedirect
@@ -307,12 +247,15 @@ export declare class ModifyCenterPolicyRequestDeviceRules extends $dara.Model {
 export declare class ModifyCenterPolicyRequestDomainResolveRule extends $dara.Model {
     /**
      * @remarks
-     * The policy description.
+     * Policy description.
+     *
+     * @example
+     * Policy description.
      */
     description?: string;
     /**
      * @remarks
-     * The domain name.
+     * Domain name.
      *
      * @example
      * *.example.com
@@ -320,12 +263,7 @@ export declare class ModifyCenterPolicyRequestDomainResolveRule extends $dara.Mo
     domain?: string;
     /**
      * @remarks
-     * Specifies whether to allow the domain name resolution rule.
-     *
-     * Valid values:
-     *
-     * *   allow
-     * *   block
+     * Resolution policy.
      *
      * @example
      * allow
@@ -345,15 +283,15 @@ export declare class ModifyCenterPolicyRequestDomainResolveRule extends $dara.Mo
 export declare class ModifyCenterPolicyRequestNetRedirectRule extends $dara.Model {
     /**
      * @remarks
-     * The domain name.
+     * Domain name.
      *
      * @example
-     * *.taobao.com
+     * *.example.com
      */
     domain?: string;
     /**
      * @remarks
-     * The redirection policy.
+     * Redirection policy.
      *
      * @example
      * Allow
@@ -361,12 +299,7 @@ export declare class ModifyCenterPolicyRequestNetRedirectRule extends $dara.Mode
     policy?: string;
     /**
      * @remarks
-     * The rule type.
-     *
-     * Valid values:
-     *
-     * *   prc: process.
-     * *   domain: domain name.
+     * Rule type.
      *
      * @example
      * domain
@@ -385,11 +318,17 @@ export declare class ModifyCenterPolicyRequestNetRedirectRule extends $dara.Mode
 }
 export declare class ModifyCenterPolicyRequestRecordEventLevels extends $dara.Model {
     /**
+     * @remarks
+     * Event level
+     *
      * @example
      * HIGH
      */
     eventLevel?: string;
     /**
+     * @remarks
+     * Event type
+     *
      * @example
      * StartApplication
      */
@@ -408,7 +347,7 @@ export declare class ModifyCenterPolicyRequestRecordEventLevels extends $dara.Mo
 export declare class ModifyCenterPolicyRequestRevokeAccessPolicyRule extends $dara.Model {
     /**
      * @remarks
-     * The client CIDR block that you want to delete. Specify an IPv4 CIDR block.
+     * Client access IP address range to delete. Specify an IPv4 CIDR block.
      *
      * @example
      * 47.100.XX.XX/16
@@ -416,7 +355,7 @@ export declare class ModifyCenterPolicyRequestRevokeAccessPolicyRule extends $da
     cidrIp?: string;
     /**
      * @remarks
-     * The description of the client IP address whitelist that you want to delete.
+     * Description of the client IP address whitelist to delete.
      *
      * @example
      * test
@@ -436,7 +375,7 @@ export declare class ModifyCenterPolicyRequestRevokeAccessPolicyRule extends $da
 export declare class ModifyCenterPolicyRequestRevokeSecurityPolicyRule extends $dara.Model {
     /**
      * @remarks
-     * The object of the security group rule that you want to delete. Specify an IPv4 CIDR block.
+     * Target of the security group control rule to delete. Specify an IPv4 CIDR block.
      *
      * @example
      * 47.100.XX.XX/16
@@ -444,7 +383,7 @@ export declare class ModifyCenterPolicyRequestRevokeSecurityPolicyRule extends $
     cidrIp?: string;
     /**
      * @remarks
-     * The description of the security group rule that you want to delete.
+     * Description of the security group control rule to delete.
      *
      * @example
      * test
@@ -452,15 +391,7 @@ export declare class ModifyCenterPolicyRequestRevokeSecurityPolicyRule extends $
     description?: string;
     /**
      * @remarks
-     * The protocol type of the security group rule that you want to delete.
-     *
-     * Valid values:
-     *
-     * *   TCP: the TCP protocol.
-     * *   UDP: the UDP protocol.
-     * *   ALL: any type of protocol.
-     * *   GRE: the GRE protocol.
-     * *   ICMP: the ICMP for IPv4.
+     * Protocol type for the security group control rule to delete.
      *
      * @example
      * TCP
@@ -468,12 +399,7 @@ export declare class ModifyCenterPolicyRequestRevokeSecurityPolicyRule extends $
     ipProtocol?: string;
     /**
      * @remarks
-     * The authorization of the security group rule that you want to delete.
-     *
-     * Valid values:
-     *
-     * *   drop: denies all access requests. If no \\"\\"access denied\\"\\" messages are returned, the requests either timed out or failed.
-     * *   accept (default): accepts all requests.
+     * Authorization policy for the security group control rule to delete.
      *
      * @example
      * accept
@@ -481,14 +407,17 @@ export declare class ModifyCenterPolicyRequestRevokeSecurityPolicyRule extends $
     policy?: string;
     /**
      * @remarks
-     * The port range of the security group rule that you want to delete. The value range of this parameter varies based on the value of IpProtocol.
+     * Port range for the security group control rule to delete. The port range depends on the protocol (IpProtocol):
      *
-     * *   If IpProtocol is set to TCP or UDP, the port range is 1 to 65535. Separate the start port number and the end port number with a forward slash (/). Example: 1/200.
-     * *   If IpProtocol is set to ICMP, set the value to -1/-1.
-     * *   If IpProtocol is set to GRE, set the value to -1/-1.
-     * *   If IpProtocol is set to ALL, set the value to -1/-1.
+     * - For TCP or UDP protocols: Port range is 1 to 65535. Separate the start and end ports with a forward slash (/). Example: 1/200.
      *
-     * For more information about the common ports, see [Common ports](https://help.aliyun.com/document_detail/40724.html).
+     * - For ICMP protocol: Set to -1/-1.
+     *
+     * - For GRE protocol: Set to -1/-1.
+     *
+     * - When IpProtocol is set to all: Set to -1/-1.
+     *
+     * For more information about common ports for typical applications, see [Common ports](https://help.aliyun.com/document_detail/40724.html).
      *
      * @example
      * 22/22
@@ -496,7 +425,7 @@ export declare class ModifyCenterPolicyRequestRevokeSecurityPolicyRule extends $
     portRange?: string;
     /**
      * @remarks
-     * The priority of the security group rule that you want to delete. A smaller value specifies a higher priority. Valid values: 1 to 60. Default value: 1.
+     * Priority of the security group control rule to delete. A smaller number indicates a higher priority. Valid values: 1 to 60. Default value: 1.
      *
      * @example
      * 1
@@ -504,12 +433,7 @@ export declare class ModifyCenterPolicyRequestRevokeSecurityPolicyRule extends $
     priority?: string;
     /**
      * @remarks
-     * The direction of the security group rule that you want to delete.
-     *
-     * Valid values:
-     *
-     * *   outflow: outbound.
-     * *   inflow: inbound.
+     * Rule direction for the security group control rule to delete.
      *
      * @example
      * outflow
@@ -529,12 +453,15 @@ export declare class ModifyCenterPolicyRequestRevokeSecurityPolicyRule extends $
 export declare class ModifyCenterPolicyRequestUsbSupplyRedirectRule extends $dara.Model {
     /**
      * @remarks
-     * The rule description.
+     * Rule description.
+     *
+     * @example
+     * Test rule
      */
     description?: string;
     /**
      * @remarks
-     * The product ID (PID).
+     * Product ID.
      *
      * @example
      * 08**
@@ -542,12 +469,7 @@ export declare class ModifyCenterPolicyRequestUsbSupplyRedirectRule extends $dar
     productId?: string;
     /**
      * @remarks
-     * Specifies whether to allow USB redirection.
-     *
-     * Valid values:
-     *
-     * *   1: allows USB redirection.
-     * *   2: forbids USB redirection.
+     * USB redirection type.
      *
      * @example
      * 1
@@ -555,11 +477,7 @@ export declare class ModifyCenterPolicyRequestUsbSupplyRedirectRule extends $dar
     usbRedirectType?: string;
     /**
      * @remarks
-     * The type of the USB redirection rule.
-     *
-     * Valid values:
-     *
-     * *   1: enables USB redirection based on device manufacturers.
+     * USB redirection rule type.
      *
      * @example
      * 1
@@ -567,7 +485,7 @@ export declare class ModifyCenterPolicyRequestUsbSupplyRedirectRule extends $dar
     usbRuleType?: string;
     /**
      * @remarks
-     * The vendor ID (VID). For more information, see [Valid USB Vendor IDs (VIDs)](https://www.usb.org/sites/default/files/vendor_ids032322.pdf_1.pdf).
+     * Vendor ID. For more information, see [Valid USB Vendor IDs (VIDs)](https://www.usb.org/sites/default/files/vendor_ids032322.pdf_1.pdf).
      *
      * @example
      * 04**
@@ -588,15 +506,9 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     academicProxy?: string;
     /**
      * @remarks
-     * Specifies whether to grant the admin permissions to end users.
-     *
-     * >  This parameter is in private preview and only available to specific users.
+     * Specifies whether users have administrator permissions after logging on to cloud computers.
      *
-     * Valid values:
-     *
-     * *   allow: forcibly grants admin permissions.
-     * *   deny: forcibly rejects granting admin permissions.
-     * *   inherited: inherits the admin permissions from the user dimension.
+     * > This feature is in invitational preview and not available to the public.
      *
      * @example
      * deny
@@ -606,12 +518,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     adminKeyboardOnWindows?: string;
     /**
      * @remarks
-     * The anti-screenshot policy.
-     *
-     * Valid values:
-     *
-     * *   off (default): disables anti-screenshot.
-     * *   on: enables anti-screenshot.
+     * Specifies whether to enable anti-screenshot protection.
      *
      * @example
      * on
@@ -619,15 +526,18 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     appContentProtection?: string;
     /**
      * @remarks
-     * The client IP address whitelists that you want to add.
+     * List of new client IP address whitelists.
      */
     authorizeAccessPolicyRule?: ModifyCenterPolicyRequestAuthorizeAccessPolicyRule[];
     /**
      * @remarks
-     * The security group rules.
+     * List of new security group control rules.
      */
     authorizeSecurityPolicyRule?: ModifyCenterPolicyRequestAuthorizeSecurityPolicyRule[];
     /**
+     * @remarks
+     * Automatically reconnect after disconnection
+     *
      * @example
      * off
      */
@@ -637,11 +547,6 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
      * @remarks
      * The business type.
      *
-     * Valid values:
-     *
-     * *   1: public cloud
-     * *   8: commercial edition.
-     *
      * This parameter is required.
      *
      * @example
@@ -650,34 +555,26 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     businessType?: number;
     /**
      * @remarks
-     * The on-premises camera redirection policy. This parameter only applies if DeviceRedirects does not include an on-premises camera redirection policy.
-     *
-     * Valid values:
-     *
-     * *   deviceRedirect: enables device redirection.
-     * *   off: disables device redirection.
+     * Local camera redirection. This parameter takes effect only if DeviceRedirects does not include a local camera redirection policy.
      *
      * @example
      * on
      */
     cameraRedirect?: string;
+    /**
+     * @remarks
+     * Event level for screen recording
+     */
     clientControlMenu?: string;
     clientCreateSnapshot?: string;
     /**
      * @remarks
-     * The types of Alibaba Cloud Workspace clients that end users can use to connect to cloud computers.
+     * List of client login control rules. Controls which clients can access cloud computers.
      */
     clientType?: ModifyCenterPolicyRequestClientType[];
     /**
      * @remarks
-     * The read/write permissions on the clipboard.
-     *
-     * Valid values:
-     *
-     * *   read: specifies one-way transfer. You can copy files only from on-premises devices to cloud computers.
-     * *   readwrite: specifies two-way transfer. You can copy files between on-premises devices and cloud computers.
-     * *   write: specifies one-way transfer. You can only copy files from cloud computers to on-premises devices.
-     * *   off (default): disables all transfers, both one-way and two-way. Files cannot be copied directly between on-premises devices and cloud computers.
+     * The clipboard permissions.
      *
      * @example
      * off
@@ -689,11 +586,6 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
      * @remarks
      * Specifies whether to enable color enhancement for design and 3D applications.
      *
-     * Valid values:
-     *
-     * *   off: doesn\\"t enable color enhancement for design and 3D applications.
-     * *   on: enables color enhancement for design and 3D applications.
-     *
      * @example
      * off
      */
@@ -701,7 +593,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     cpdDriveClipboard?: string;
     /**
      * @remarks
-     * The CPU underclocking duration. Valid values: 30 to 120. Unit: seconds.
+     * CPU downclocking duration. Valid values: 30 to 120. Unit: seconds.
      *
      * @example
      * 50
@@ -710,17 +602,12 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     cpuOverload?: string;
     /**
      * @remarks
-     * The CPU processors.
+     * The name of the process.
      */
     cpuProcessors?: string[];
     /**
      * @remarks
-     * The CPU spike protection policy.
-     *
-     * Valid values:
-     *
-     * *   off: disables CPU spike protection.
-     * *   on: enables CPU spike protection.
+     * CPU protection mode switch.
      *
      * @example
      * off
@@ -728,7 +615,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     cpuProtectedMode?: string;
     /**
      * @remarks
-     * The overall CPU usage. Valid values: 70 to 90. Unit: percentage (%).
+     * Overall CPU usage percentage. Valid values: 70 to 90.
      *
      * @example
      * 70
@@ -736,7 +623,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     cpuRateLimit?: number;
     /**
      * @remarks
-     * The overall CPU sampling duration. Valid values: 10 to 60. Unit: seconds.
+     * Overall CPU sampling duration. Valid values: 10 to 60. Unit: seconds.
      *
      * @example
      * 30
@@ -744,7 +631,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     cpuSampleDuration?: number;
     /**
      * @remarks
-     * The single-CPU usage. Valid values: 70 to 100. Unit: %.
+     * Single-core CPU usage percentage. Valid values: 70 to 100.
      *
      * @example
      * 80
@@ -753,12 +640,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     description?: string;
     /**
      * @remarks
-     * Specifies whether to display the peripheral connection prompt.
-     *
-     * Valid values:
-     *
-     * *   off: doesn\\"t display the peripheral connection prompt.
-     * *   on: displays the peripheral connection prompt.
+     * Peripheral connection prompt control.
      *
      * @example
      * off
@@ -766,24 +648,19 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     deviceConnectHint?: string;
     /**
      * @remarks
-     * The device redirection rules.
+     * Device redirection rules.
      */
     deviceRedirects?: ModifyCenterPolicyRequestDeviceRedirects[];
     /**
      * @remarks
-     * The custom peripheral rules.
+     * Custom peripheral rules.
      */
     deviceRules?: ModifyCenterPolicyRequestDeviceRules[];
     /**
      * @remarks
-     * Specifies whether to retain the session upon disconnection.
-     *
-     * >  This parameter applies only to cloud application policies.
+     * Session retention after disconnection.
      *
-     * Valid values:
-     *
-     * *   customTime: retains the session for a specified time period.
-     * *   persistent: retains the session permanently.
+     * > This parameter applies only to cloud application policies.
      *
      * @example
      * customTime
@@ -791,9 +668,9 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     disconnectKeepSession?: string;
     /**
      * @remarks
-     * The retention period of the session after disconnection. Valid values: 30 to 7200. Unit: seconds.
+     * Session retention duration after disconnection. Valid values: 30 to 7200. Unit: seconds.
      *
-     * >  This parameter applies only to cloud application policies.
+     * > This parameter applies only to cloud application policies.
      *
      * @example
      * 120
@@ -802,14 +679,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     diskOverload?: string;
     /**
      * @remarks
-     * The display mode.
-     *
-     * Valid values:
-     *
-     * *   clientCustom: suitable for user-defined scenarios.
-     * *   adminOffice: suitable for daily office scenarios.
-     * *   adminDesign: suitable for design and 3D application scenarios.
-     * *   adminCustom: suitable for admin-customized scenarios.
+     * Display mode.
      *
      * @example
      * clientCustom
@@ -817,17 +687,12 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     displayMode?: string;
     /**
      * @remarks
-     * The domain resolution policies.
+     * Domain name resolution policies.
      */
     domainResolveRule?: ModifyCenterPolicyRequestDomainResolveRule[];
     /**
      * @remarks
-     * Specifies whether to enforce the domain resolution policy.
-     *
-     * Valid values:
-     *
-     * *   off: disables the domain resolution policy.
-     * *   on: enables the domain resolution policy.
+     * Domain name resolution policy type.
      *
      * @example
      * off
@@ -835,12 +700,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     domainResolveRuleType?: string;
     /**
      * @remarks
-     * Specifies whether to enforce a bandwidth limit for sessions.
-     *
-     * Valid values:
-     *
-     * *   off: doesn\\"t enforce a bandwidth limit for sessions.
-     * *   on: enforces a bandwidth limit for sessions.
+     * Session bandwidth throttling.
      *
      * @example
      * off
@@ -848,12 +708,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     enableSessionRateLimiting?: string;
     /**
      * @remarks
-     * Specifies whether to enable end users to request administrator help.
-     *
-     * Valid values:
-     *
-     * *   off: disables end users to request administrator help.
-     * *   on: enables end users to request administrator help.
+     * User requests administrator assistance.
      *
      * @example
      * off
@@ -861,12 +716,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     endUserApplyAdminCoordinate?: string;
     /**
      * @remarks
-     * Specifies whether to allow end users from the same office network to share cloud computers.
-     *
-     * Valid values:
-     *
-     * *   off: doesn\\"t allow end users from the same office network to share cloud computers.
-     * *   on: allows end users from the same office network to share cloud computers.
+     * Users on the same office network share cloud computers.
      *
      * @example
      * off
@@ -875,12 +725,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     externalDrive?: string;
     /**
      * @remarks
-     * Specifies whether to enable file transfer.
-     *
-     * Valid values:
-     *
-     * *   off: enables file transfer.
-     * *   on: disables file transfer.
+     * File migration.
      *
      * @example
      * off
@@ -888,15 +733,14 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     fileMigrate?: string;
     fileTransferAddress?: string;
     fileTransferSpeed?: string;
+    /**
+     * @remarks
+     * Screen recording event suffix
+     */
     fileTransferSpeedLocation?: string;
     /**
      * @remarks
-     * Specifies whether to enable Image Quality Control. This feature is highly recommended for professional design scenarios where performance and user experience are critical.
-     *
-     * Valid values:
-     *
-     * *   off
-     * *   on
+     * Specifies whether to enable the image quality policy for graphics-intensive cloud computers. Enable this policy for scenarios such as professional design where high performance and user experience are required.
      *
      * @example
      * off
@@ -905,14 +749,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     hoverConfigMsg?: string;
     /**
      * @remarks
-     * The file transfer policy on the web client.
-     *
-     * Valid values:
-     *
-     * *   all: File upload and download are supported.
-     * *   download: Only file download is supported.
-     * *   upload: Only file upload is supported.
-     * *   off (default): File upload and download are not supported.
+     * The file transfer policy for web clients.
      *
      * @example
      * off
@@ -920,29 +757,23 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     html5FileTransfer?: string;
     /**
      * @remarks
-     * The network communication protocol.
-     *
-     * Valid values:
-     *
-     * *   tcp: TCP is used when UDP/AST is restricted.
-     * *   rtc: AST is used for high-frequency audio and video streaming.
-     * *   auto: UTO enables automatic switch between AST and UDP modes based on desktop content.
-     * *   both: UDP is ideal for office and HD graphic design use.
+     * Network communication protocol.
      *
      * @example
      * both
      */
     internetCommunicationProtocol?: string;
-    internetPrinter?: string;
     /**
      * @remarks
-     * The read/write permissions on the on-premises drive.
-     *
-     * Valid values:
+     * Wuying Keeper toggle for mobile devices
      *
-     * *   read: read-only. Cloud computers support on-premises disk mapping, but only for reading (copying) files—not modifying them.
-     * *   readwrite: read and write. Cloud computers support on-premises disk mapping, allowing you to read (copy) and write (modify) on-premises files.
-     * *   off (default): none. Cloud computers don\\"t support on-premises disk mapping.
+     * @example
+     * off
+     */
+    internetPrinter?: string;
+    /**
+     * @remarks
+     * The local disk mapping permissions.
      *
      * @example
      * off
@@ -950,7 +781,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     localDrive?: string;
     /**
      * @remarks
-     * The maximum duration to retry reconnecting to cloud computers after an unexpected disconnection (non-human causes). Valid values: 30 to 7200. Unit: seconds.
+     * Maximum reconnection retry time after an unexpected disconnection. Valid values: 30 to 7200. Unit: seconds.
      *
      * @example
      * 120
@@ -958,7 +789,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     maxReconnectTime?: number;
     /**
      * @remarks
-     * The memory underclocking duration per process. Valid values: 30 to 120. Unit: seconds.
+     * Memory downclocking duration per process. Valid values: 30 to 120. Unit: seconds.
      *
      * @example
      * 40
@@ -967,17 +798,12 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     memoryOverload?: string;
     /**
      * @remarks
-     * The memory processors.
+     * The name of the process.
      */
     memoryProcessors?: string[];
     /**
      * @remarks
-     * The memory spike protection policy.
-     *
-     * Valid values:
-     *
-     * *   off: disables memory spike protection.
-     * *   on: enables memory spike protection.
+     * Memory protection mode switch.
      *
      * @example
      * off
@@ -985,7 +811,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     memoryProtectedMode?: string;
     /**
      * @remarks
-     * The overall memory usage. Valid values: 70 to 90. Unit: %.
+     * Overall memory usage percentage. Valid values: 70 to 90.
      *
      * @example
      * 70
@@ -993,7 +819,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     memoryRateLimit?: number;
     /**
      * @remarks
-     * The overall memory sampling duration. Valid values: 30 to 60. Unit: seconds.
+     * Overall memory sampling duration. Valid values: 30 to 60. Unit: seconds.
      *
      * @example
      * 40
@@ -1001,7 +827,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     memorySampleDuration?: number;
     /**
      * @remarks
-     * The memory usage per process. Valid values: 30 to 60. Unit: %.
+     * Memory usage per process percentage. Valid values: 30 to 60.
      *
      * @example
      * 40
@@ -1009,45 +835,44 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     memorySingleRateLimit?: number;
     /**
      * @remarks
-     * Specifies whether to display the Restart button in the DesktopAssistant menu when end users connect to cloud computers from Android clients.
+     * Specifies whether to provide the Restart button in the cloud computer floating ball when connecting via mobile clients (Android and iOS clients).
      *
-     * >  This feature applies to only mobile clients of version 7.4.0 or later.
-     *
-     * Valid values:
-     *
-     * *   off: doesn\\"t display the Restart button in the DesktopAssistant menu when end users connect to cloud computers from Android clients.
-     * *   on: displays the Restart button in the DesktopAssistant menu when end users connect to cloud computers from Android clients.
+     * > This feature applies only to mobile clients of version 7.4 or later.
      *
      * @example
      * off
      */
     mobileRestart?: string;
     /**
+     * @remarks
+     * The security button toggle for Windows systems on mobile devices
+     *
      * @example
      * off
      */
     mobileSafeMenu?: string;
     /**
      * @remarks
-     * Specifies whether to display the Stop button in the DesktopAssistant menu when end users connect to cloud computers from Android clients.
-     *
-     * >  This feature applies to only mobile clients of version 7.4.0 or later.
-     *
-     * Valid values:
+     * Specifies whether to provide the Shutdown button in the cloud computer floating ball when connecting via mobile clients (Android and iOS clients).
      *
-     * *   off: doesn\\"t display the Stop button in the DesktopAssistant menu when end users connect to cloud computers from Android clients.
-     * *   on: displays the Stop button in the DesktopAssistant menu when end users connect to cloud computers from Android clients.
+     * > This feature applies only to mobile clients of version 7.4 or later.
      *
      * @example
      * off
      */
     mobileShutdown?: string;
     /**
+     * @remarks
+     * Wuying Keeper toggle for mobile devices
+     *
      * @example
      * off
      */
     mobileWuyingKeeper?: string;
     /**
+     * @remarks
+     * Mobile Wy Assistant Toggle
+     *
      * @example
      * off
      */
@@ -1064,15 +889,9 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     name?: string;
     /**
      * @remarks
-     * The network redirection policy.
-     *
-     * >  This parameter is in private preview and only available to specific users.
-     *
-     * Valid values:
+     * Specifies whether to enable network redirection.
      *
-     * *   all: enables network redirection globally.
-     * *   off (default): disables network redirection.
-     * *   on: enables the whitelist mode.
+     * > This feature is in invitational preview and not available to the public.
      *
      * @example
      * on
@@ -1080,21 +899,16 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     netRedirect?: string;
     /**
      * @remarks
-     * The network redirection rules.
+     * Network redirection policy details.
      *
-     * >  This parameter is in private preview and only available to specific users.
+     * > This feature is in invitational preview and not available to the public.
      */
     netRedirectRule?: ModifyCenterPolicyRequestNetRedirectRule[];
     /**
      * @remarks
-     * Specifies whether to enforce a disconnection upon inactivity.
+     * Disconnect on inactivity.
      *
-     * >  This parameter applies only to cloud application policies.
-     *
-     * Valid values:
-     *
-     * *   off: doesn\\"t enforce a disconnection upon inactivity.
-     * *   on: enforces a disconnection upon inactivity.
+     * > This parameter applies only to cloud application policies.
      *
      * @example
      * off
@@ -1102,9 +916,9 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     noOperationDisconnect?: string;
     /**
      * @remarks
-     * The duration of disconnection after inactivity. Valid values: 120 to 7200. Unit: seconds.
+     * Inactivity disconnect duration. Valid values: 120 to 7200. Unit: seconds.
      *
-     * >  This parameter applies only to cloud application policies.
+     * > This parameter applies only to cloud application policies.
      *
      * @example
      * 120
@@ -1123,13 +937,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     portProxy?: string;
     /**
      * @remarks
-     * The printer redirection policy. This parameter only applies if DeviceRedirects does not include a printer redirection policy.
-     *
-     * Valid values:
-     *
-     * *   deviceRedirect (default):enables device redirection.
-     * *   usbRedirect: enables USB redirection.
-     * *   off: disables any type of redirection.
+     * The printer redirection policy. This parameter takes effect only if DeviceRedirects does not include a printer redirection policy.
      *
      * @example
      * off
@@ -1139,50 +947,49 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
      * @remarks
      * Specifies whether to enable image quality enhancement for design and 3D applications.
      *
-     * Valid values:
-     *
-     * *   off: doesn\\"t enable image quality enhancement for design and 3D applications.
-     * *   on: enables image quality enhancement for design and 3D applications.
-     *
      * @example
      * off
      */
     qualityEnhancement?: string;
     /**
      * @remarks
-     * The duration of screen recording after the specified event is detected. Unit: minutes. Valid values: 10 to 60.
+     * Screen recording duration after an event is detected in audit. Unit: minutes. Valid values: 10 to 60.
      *
      * @example
      * 10
      */
     recordEventDuration?: number;
+    /**
+     * @remarks
+     * File extensions for screen recording events
+     */
     recordEventFileExts?: string[];
     /**
      * @remarks
-     * The absolute paths to screen recording files.
+     * Absolute paths for file monitoring in screen recording audit.
      */
     recordEventFilePaths?: string[];
+    /**
+     * @remarks
+     * Levels of screen recording events
+     */
     recordEventLevels?: ModifyCenterPolicyRequestRecordEventLevels[];
     /**
      * @remarks
-     * The absolute paths to screen recording registries.
+     * Absolute paths for registry monitoring in screen recording audit.
+     *
+     * @example
+     * Computer\\HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\USBSTOR
      */
     recordEventRegisters?: string[];
     /**
      * @remarks
-     * The events that trigger screen recording.
+     * List of screen recording events.
      */
     recordEvents?: string[];
     /**
      * @remarks
-     * The screen recording policy.
-     *
-     * Valid values:
-     *
-     * *   period: Screen recording occurs at set intervals.
-     * *   session: Screen recording is limited to sessions only.
-     * *   off: Screen recording is disabled.
-     * *   alltime: Screen recording is always enabled.
+     * Specifies whether to enable screen recording.
      *
      * @example
      * off
@@ -1190,12 +997,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     recording?: string;
     /**
      * @remarks
-     * Specifies whether to record audio files generated by cloud computers.
-     *
-     * Valid values:
-     *
-     * *   off: doesn\\"t record audio files generated by cloud computers.
-     * *   on: records audio files generated by cloud computers.
+     * Cloud computer audio recording option.
      *
      * @example
      * on
@@ -1203,7 +1005,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     recordingAudio?: string;
     /**
      * @remarks
-     * The length of the screen recording file (in minutes). Screen recordings are split based on the specified duration and uploaded to Object Storage Service (OSS) buckets. If a file reaches 300 MB, the system prioritizes rolling updates for that file. Valid values: 10 to 60.
+     * Screen recording file viewing duration in minutes. Recording files are automatically split based on the specified duration and uploaded to the storage bucket. When a file reaches 300 MB, it is prioritized for rolling updates. Valid values: 10 to 60.
      *
      * @example
      * 10
@@ -1211,7 +1013,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     recordingDuration?: number;
     /**
      * @remarks
-     * The screen recording\\"s end time in HH:MM:SS format. The value is meaningful only if `Recording` is set to `PERIOD`.
+     * Screen recording end time in HH:MM:SS format. This parameter is meaningful only when `Recording` is set to `PERIOD`.
      *
      * @example
      * 08:59:00
@@ -1219,7 +1021,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     recordingEndTime?: string;
     /**
      * @remarks
-     * The retention period of the screen recording file. Valid values: 1 to 180. Unit: days.
+     * Retention period of screen recording files. Valid values: 1 to 180 days.
      *
      * @example
      * 15
@@ -1227,7 +1029,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     recordingExpires?: number;
     /**
      * @remarks
-     * The frame rate of screen recording. Unit: fps.
+     * Screen recording frame rate. Unit: FPS.
      *
      * @example
      * 5
@@ -1235,7 +1037,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     recordingFps?: string;
     /**
      * @remarks
-     * The screen recording\\"s start time in HH:MM:SS format. The value is meaningful only if `Recording` is set to `PERIOD`.
+     * Screen recording start time in HH:MM:SS format. This parameter is meaningful only when `Recording` is set to `PERIOD`.
      *
      * @example
      * 08:00:00
@@ -1243,12 +1045,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     recordingStartTime?: string;
     /**
      * @remarks
-     * Specifies whether to notify end users when screen recording is enabled.
-     *
-     * Valid values:
-     *
-     * *   off: doesn\\"t notify end users when screen recording is enabled.
-     * *   on: notifies end users when screen recording is enabled.
+     * Notify end users when screen recording is enabled.
      *
      * @example
      * off
@@ -1256,7 +1053,10 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     recordingUserNotify?: string;
     /**
      * @remarks
-     * The notification sent to end users when screen recording is enabled.
+     * Message to notify end users when screen recording is enabled.
+     *
+     * @example
+     * Screen recording is enabled.
      */
     recordingUserNotifyMessage?: string;
     /**
@@ -1271,13 +1071,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     regionId?: string;
     /**
      * @remarks
-     * The keyboard and mouse control permissions during remote assistance.
-     *
-     * Valid values:
-     *
-     * *   optionalControl: By default, keyboard and mouse control is disabled during remote assistance. You can request permissions as needed.
-     * *   fullControl: Keyboard and mouse control is enabled during remote assistance.
-     * *   disableControl: Keyboard and mouse control is disabled during remote assistance.
+     * Keyboard and mouse control permissions for remote assistance.
      *
      * @example
      * fullControl
@@ -1285,12 +1079,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     remoteCoordinate?: string;
     /**
      * @remarks
-     * The computer reset setting.
-     *
-     * Valid values:
-     *
-     * *   off: disables the reset setting.
-     * *   on: enables the reset setting.
+     * Reset cloud computer.
      *
      * @example
      * off
@@ -1299,7 +1088,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     resolutionDpi?: number;
     /**
      * @remarks
-     * The height of the resolution. Unit: pixel. Valid values for cloud applications: 500 to 50000. Valid values for cloud computers: 480 to 4096.
+     * Resolution height. Unit: pixels. Valid values for cloud applications: 500 to 50000. Valid values for cloud computers: 480 to 4096.
      *
      * @example
      * 1280
@@ -1307,12 +1096,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     resolutionHeight?: number;
     /**
      * @remarks
-     * The resolution type.
-     *
-     * Valid values:
-     *
-     * *   adaptive: adaptive resolution.
-     * *   customer: fixed resolution.
+     * Resolution type.
      *
      * @example
      * adaptive
@@ -1320,7 +1104,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     resolutionModel?: string;
     /**
      * @remarks
-     * The width of the resolution. Unit: pixel. Valid values for cloud applications: 500 to 50000. Valid values for cloud computers: 480 to 4096.
+     * Resolution width. Unit: pixels. Valid values for cloud applications: 500 to 50000. Valid values for cloud computers: 480 to 4096.
      *
      * @example
      * 720
@@ -1330,11 +1114,6 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
      * @remarks
      * The resource type.
      *
-     * Valid values:
-     *
-     * *   app: cloud applications.
-     * *   desktop: cloud computers.
-     *
      * This parameter is required.
      *
      * @example
@@ -1343,37 +1122,46 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     resourceType?: string;
     /**
      * @remarks
-     * The client IP address whitelists that you want to delete.
+     * The list of client IP address whitelists to delete.
      */
     revokeAccessPolicyRule?: ModifyCenterPolicyRequestRevokeAccessPolicyRule[];
     /**
      * @remarks
-     * The security group rules that you want to delete.
+     * List of security group control rules to delete.
      */
     revokeSecurityPolicyRule?: ModifyCenterPolicyRequestRevokeSecurityPolicyRule[];
+    /**
+     * @remarks
+     * Security button toggle for Windows systems on mobile devices
+     *
+     * @example
+     * off
+     */
     safeMenu?: string;
     /**
      * @remarks
      * The effective scope of the policy.
      *
-     * Valid values:
-     *
-     * *   IP: The policy applies to specific IP addresses.
-     * *   GLOBAL: The policy applies globally.
-     *
      * @example
      * GLOBAL
      */
     scope?: string;
     /**
      * @remarks
-     * The effective scopes. This parameter is required when `Scope` is set to `IP`. If `Scope` is set to `IP`, this parameter doesn\\"t take effect.
+     * Specify when `Scope` is set to `IP`. Takes effect only when `Scope` is `IP`.
      */
     scopeValue?: string[];
+    /**
+     * @remarks
+     * Xiao Ying toggle for mobile devices
+     *
+     * @example
+     * off
+     */
     screenDisplayMode?: string;
     /**
      * @remarks
-     * The bandwidth peak allowed for sessions. Unit: Kbit/s. Valid values: 2000 to 100000.
+     * Maximum session bandwidth throttling value. Unit: Kbps. Valid values: 2000 to 100000.
      *
      * @example
      * 2000
@@ -1381,12 +1169,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     sessionMaxRateKbps?: number;
     /**
      * @remarks
-     * Specifies whether to enable smoothness enhancement for daily office use.
-     *
-     * Valid values:
-     *
-     * *   off: doesn\\"t enable smoothness enhancement for daily office use.
-     * *   on: enables smoothness enhancement for daily office use.
+     * Specifies whether to enable smoothness enhancement for daily office scenarios.
      *
      * @example
      * off
@@ -1394,12 +1177,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     smoothEnhancement?: string;
     /**
      * @remarks
-     * Specifies whether to display the metric status entry in the DesktopAssistant menu.
-     *
-     * Valid values:
-     *
-     * *   off: doesn\\"t display the metric status entry in the DesktopAssistant menu.
-     * *   on: displays the metric status entry in the DesktopAssistant menu.
+     * Specifies whether to provide the status monitoring entry in the cloud computer floating ball.
      *
      * @example
      * off
@@ -1407,12 +1185,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     statusMonitor?: string;
     /**
      * @remarks
-     * The streaming mode.
-     *
-     * Valid values:
-     *
-     * *   intelligent
-     * *   smooth
+     * Streaming mode adaptation scenario.
      *
      * @example
      * smooth
@@ -1420,7 +1193,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     streamingMode?: string;
     /**
      * @remarks
-     * The target frame rate. Valid values: 10 to 60.
+     * Target frame rate. Valid values: 10 to 60.
      *
      * @example
      * 30
@@ -1428,14 +1201,9 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     targetFps?: number;
     /**
      * @remarks
-     * Specifies whether to display the application taskbar.
+     * Application taskbar.
      *
-     * >  This parameter applies only to cloud application policies.
-     *
-     * Valid values:
-     *
-     * *   off: doesn\\"t display the application taskbar.
-     * *   on: displays the application taskbar.
+     * > This parameter applies only to cloud application policies.
      *
      * @example
      * off
@@ -1443,12 +1211,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     taskbar?: string;
     /**
      * @remarks
-     * Specifies whether to enable the USB redirection feature.
-     *
-     * Valid values:
-     *
-     * *   off (default)
-     * *   on
+     * USB redirection.
      *
      * @example
      * off
@@ -1456,13 +1219,13 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     usbRedirect?: string;
     /**
      * @remarks
-     * The USB redirection rules.
+     * USB redirection rules.
      */
     usbSupplyRedirectRule?: ModifyCenterPolicyRequestUsbSupplyRedirectRule[];
     useTime?: string;
     /**
      * @remarks
-     * The average bitrate for video encoding. Unit: Kbit/s. Valid values: 1000 to 50000.
+     * Average bitrate for video encoding. Unit: Kbps. Valid values: 1000 to 50000.
      *
      * @example
      * 2000
@@ -1470,7 +1233,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     videoEncAvgKbps?: number;
     /**
      * @remarks
-     * The maximum QP for video files. Higher QP values result in lower video quality. Valid values: 0 to 51.
+     * Maximum QP for video encoding, representing lowest quality. Valid values: 0 to 51.
      *
      * @example
      * 30
@@ -1478,7 +1241,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     videoEncMaxQP?: number;
     /**
      * @remarks
-     * The minimum quantizer parameter (QP) for video files. A lower QP means better video quality. Valid values: 0 to 51.
+     * Minimum QP for video encoding, representing highest quality. Valid values: 0 to 51.
      *
      * @example
      * 30
@@ -1486,7 +1249,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     videoEncMinQP?: number;
     /**
      * @remarks
-     * The peak bitrate allowed for video encoding. Unit: Kbit/s. Valid values: 1000 to 50000.
+     * Peak bitrate for video encoding. Unit: Kbps. Valid values: 1000 to 50000.
      *
      * @example
      * 2000
@@ -1494,12 +1257,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     videoEncPeakKbps?: number;
     /**
      * @remarks
-     * The video encoding policy.
-     *
-     * Valid values:
-     *
-     * *   qualityFirst: prioritizes image quality.
-     * *   bandwidthFirst: prioritizes bandwidth.
+     * Video encoding policy.
      *
      * @example
      * qualityFirst
@@ -1507,12 +1265,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     videoEncPolicy?: string;
     /**
      * @remarks
-     * The multimedia redirection policy.
-     *
-     * Valid values:
-     *
-     * *   off: disables multimedia redirection.
-     * *   on: enables multimedia redirection.
+     * Multimedia redirection.
      *
      * @example
      * on
@@ -1520,14 +1273,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     videoRedirect?: string;
     /**
      * @remarks
-     * The image display quality.
-     *
-     * Valid values:
-     *
-     * *   high: high-definition (HD).
-     * *   low: smoothness.
-     * *   lossless: no quality loss.
-     * *   medium (default): scenario-specific adaptation.
+     * The image display quality policy.
      *
      * @example
      * low
@@ -1535,13 +1281,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     visualQuality?: string;
     /**
      * @remarks
-     * The watermark policy.
-     *
-     * Valid values:
-     *
-     * *   blind: displays invisible watermarks.
-     * *   off (default): displays no watermark.
-     * *   on: displays visible watermarks.
+     * Watermark.
      *
      * @example
      * off
@@ -1549,12 +1289,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     watermark?: string;
     /**
      * @remarks
-     * Specifies whether to enable anti-screen capture for invisible watermarks.
-     *
-     * Valid values:
-     *
-     * *   off: doesn\\"t enable anti-screen capture for invisible watermarks.
-     * *   on: enables anti-screen capture for invisible watermarks.
+     * Blind watermark anti-photo feature.
      *
      * @example
      * off
@@ -1562,7 +1297,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     watermarkAntiCam?: string;
     /**
      * @remarks
-     * The font color of the watermark. Valid values: 0 to 16777215.
+     * Watermark font color. Valid values: 0 to 16777215.
      *
      * @example
      * 0
@@ -1570,7 +1305,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     watermarkColor?: number;
     /**
      * @remarks
-     * The number of watermark columns. Valid values: 3 to 10.
+     * Number of watermark columns. Valid values: 3 to 10.
      *
      * @example
      * 3
@@ -1578,7 +1313,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     watermarkColumnAmount?: number;
     /**
      * @remarks
-     * If you set `WatermarkType` to `custom`, you must also specify `WatermarkCustomText`.
+     * If you set `WatermarkType` to `custom`, you must also specify custom text using the `WatermarkCustomText` parameter.
      *
      * @example
      * test
@@ -1586,7 +1321,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     watermarkCustomText?: string;
     /**
      * @remarks
-     * The watermark rotation. Valid values: -10 to -30.
+     * Watermark tilt angle. Valid values: -10 to -30.
      *
      * @example
      * -10
@@ -1594,7 +1329,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     watermarkDegree?: number;
     /**
      * @remarks
-     * The font size of the watermark. Valid values: 10 to 20.
+     * Watermark font size. Valid values: 10 to 20.
      *
      * @example
      * 10
@@ -1602,12 +1337,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     watermarkFontSize?: number;
     /**
      * @remarks
-     * The font style of the watermark.
-     *
-     * Valid values:
-     *
-     * *   plain
-     * *   bold
+     * Watermark font style.
      *
      * @example
      * plain
@@ -1615,13 +1345,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     watermarkFontStyle?: string;
     /**
      * @remarks
-     * The enhancement level for invisible watermarks.
-     *
-     * Valid values:
-     *
-     * *   high
-     * *   low
-     * *   medium
+     * Blind watermark enhancement feature.
      *
      * @example
      * medium
@@ -1629,7 +1353,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     watermarkPower?: string;
     /**
      * @remarks
-     * The number of watermark rows. Valid values: 3 to 10.
+     * Number of watermark rows. Valid values: 3 to 10.
      *
      * @example
      * 5
@@ -1637,12 +1361,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     watermarkRowAmount?: number;
     /**
      * @remarks
-     * Specifies whether to enable security priority for invisible watermarks.
-     *
-     * Valid values:
-     *
-     * *   off
-     * *   on
+     * Blind watermark security priority rule.
      *
      * @example
      * off
@@ -1651,7 +1370,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     watermarkShadow?: string;
     /**
      * @remarks
-     * The watermark opacity. A higher value makes the watermark more opaque. Valid values: 10 to 100.
+     * Watermark opacity. A higher value means lower transparency. Valid values: 10 to 100.
      *
      * @example
      * 10
@@ -1659,18 +1378,9 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     watermarkTransparencyValue?: number;
     /**
      * @remarks
-     * The watermark type. You can specify up to three types. Separate multiple values with commas (,).
-     *
-     * >  If you provide `custom` as the value for this parameter, you must configure `WatermarkCustomText` to specify custom text.
+     * The watermark type. You can select up to three types, separated by commas.
      *
-     * Valid values:
-     *
-     * *   EndUserId: the username.
-     * *   Custom: the custom text.
-     * *   DesktopIp: the IP address of the cloud computer.
-     * *   ClientIp: the IP address of the client.
-     * *   HostName: the rightmost 15 digits of the cloud computer ID.
-     * *   ClientTime: the current time displayed on the cloud computer.
+     * > If you set this parameter to `custom`, you must also specify custom text using the `WatermarkCustomText` parameter.
      *
      * @example
      * EndUserId
@@ -1678,12 +1388,7 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     watermarkType?: string;
     /**
      * @remarks
-     * Specifies whether to enable Cloud Computer Manager.
-     *
-     * Valid values:
-     *
-     * *   off: disables Cloud Computer Manager.
-     * *   on: enables Cloud Computer Manager.
+     * Wuying Keeper switch.
      *
      * @example
      * off
@@ -1691,14 +1396,9 @@ export declare class ModifyCenterPolicyRequest extends $dara.Model {
     wuyingKeeper?: string;
     /**
      * @remarks
-     * Specifies whether to display the Xiaoying AI Assistant option in the DesktopAssistant menu when end users connect to cloud computers via desktop clients (Windows and macOS).
-     *
-     * >  This feature applies to only desktop clients of version 7.7.0 or later.
-     *
-     * Valid values:
+     * Specifies whether to provide the Wuying AI Assistant entry in the cloud computer floating ball when connecting via desktop clients (including Windows and macOS clients).
      *
-     * *   off: doesn\\"t display the Xiaoying AI Assistant option in the DesktopAssistant menu.
-     * *   on: displays the Xiaoying AI Assistant option in the DesktopAssistant menu.
+     * > This feature applies only to desktop clients of version 7.7 or later.
      *
      * @example
      * on