@alicloud/ecd20200930 4.25.3 → 4.25.5

package/dist/models/ModifyPolicyGroupRequest.d.ts

@@ -2,7 +2,7 @@ import * as $dara from '@darabonba/typescript';
 export declare class ModifyPolicyGroupRequestAuthorizeAccessPolicyRule extends $dara.Model {
     /**
      * @remarks
-     * The client CIDR block. Specify an IPv4 CIDR block.
+     * The client IP address range. Specify the value in CIDR notation.
      *
      * This parameter is required.
      *
@@ -32,7 +32,7 @@ export declare class ModifyPolicyGroupRequestAuthorizeAccessPolicyRule extends $
 export declare class ModifyPolicyGroupRequestAuthorizeSecurityPolicyRule extends $dara.Model {
     /**
      * @remarks
-     * The object to which the security group rule applies. The value is an IPv4 CIDR block.
+     * The destination IPv4 address range. Specify the value in CIDR notation.
      *
      * @example
      * 10.0.XX.XX/8
@@ -50,26 +50,13 @@ export declare class ModifyPolicyGroupRequestAuthorizeSecurityPolicyRule extends
      * @remarks
      * The protocol type of the security group rule.
      *
-     * Valid values:
-     *
-     * *   UDP: the User Datagram Protocol (UDP) protocol.
-     * *   TCP: the Transmission Control Protocol (TCP) protocol.
-     * *   ALL: all protocols.
-     * *   GRE: the Generic Routing Encapsulation (GRE) protocol.
-     * *   ICMP: the Internet Control Message Protocol (ICMP) for (IPv4)
-     *
      * @example
-     * tcp
+     * TCP
      */
     ipProtocol?: string;
     /**
      * @remarks
-     * The authorization of the security group rule.
-     *
-     * Valid values:
-     *
-     * *   drop: denies all access requests. If no messages of access denied are returned, the requests timed out or failed.
-     * *   accept: accepts all requests.
+     * The policy of the security group rule.
      *
      * @example
      * accept
@@ -77,14 +64,17 @@ export declare class ModifyPolicyGroupRequestAuthorizeSecurityPolicyRule extends
     policy?: string;
     /**
      * @remarks
-     * The port range of the security group rule. The value range of this parameter varies based on the value of the IpProtocol parameter.
+     * The port range of the security group rule. The value of this parameter depends on the \\`IpProtocol\\` parameter:
+     *
+     * - If the protocol is TCP or UDP, the port range is 1 to 65535. Use a forward slash (/) to separate the start and end port numbers. For example: 1/200.
+     *
+     * - If the protocol is ICMP, the port range is -1/-1.
      *
-     * *   If the IpProtocol parameter is set to TCP or UDP, the port range is 1 to 65535. Separate the start port number and the end port number with a forward slash (/). Example: 1/200.
-     * *   If the IpProtocol parameter is set to ICMP, set the value to -1/-1.
-     * *   If the IpProtocol parameter is set to GRE, set the value to -1/-1.
-     * *   If the IpProtocol parameter is set to ALL, set the value to -1/-1.
+     * - If the protocol is GRE, the port range is -1/-1.
      *
-     * For more information about the common ports applied in EDS, see [Common ports](https://help.aliyun.com/document_detail/40724.html).
+     * - If IpProtocol is set to all, the port range is -1/-1.
+     *
+     * For more information about common ports, see [Common ports](https://help.aliyun.com/document_detail/40724.html).
      *
      * @example
      * 22/22
@@ -92,7 +82,7 @@ export declare class ModifyPolicyGroupRequestAuthorizeSecurityPolicyRule extends
     portRange?: string;
     /**
      * @remarks
-     * The priority of the security group rule. A smaller value indicates a higher priority. Valid values: 1 to 60. Default value: 1
+     * The priority of the security group rule. A smaller value indicates a higher priority. Valid values: 1 to 60. Default value: 1.
      *
      * @example
      * 1
@@ -102,11 +92,6 @@ export declare class ModifyPolicyGroupRequestAuthorizeSecurityPolicyRule extends
      * @remarks
      * The direction of the security group rule.
      *
-     * Valid values:
-     *
-     * *   outflow: outbound
-     * *   inflow: inbound
-     *
      * @example
      * inflow
      */
@@ -125,17 +110,9 @@ export declare class ModifyPolicyGroupRequestAuthorizeSecurityPolicyRule extends
 export declare class ModifyPolicyGroupRequestClientType extends $dara.Model {
     /**
      * @remarks
-     * The type of the Alibaba Cloud Workspace client.
-     *
-     * >  If you do not specify the `ClientType` parameter, all types of the client are allowed by default.
+     * The type of client.
      *
-     * Valid values:
-     *
-     * *   html5: web client
-     * *   android: Android client
-     * *   windows: Windows client
-     * *   ios: iOS client
-     * *   macos: macOS client
+     * > If you do not specify this parameter, logons from all client types are allowed by default.
      *
      * @example
      * windows
@@ -143,14 +120,9 @@ export declare class ModifyPolicyGroupRequestClientType extends $dara.Model {
     clientType?: string;
     /**
      * @remarks
-     * Specifies whether to allow end users to use a specific type of the client to connect to cloud computers.
-     *
-     * >  If you do not specify the `ClientType` parameter, all types of the client are allowed by default.
-     *
-     * Valid values:
+     * Specifies whether to allow logons from this client type.
      *
-     * *   off
-     * *   on
+     * > If you do not specify this parameter, logons from all client types are allowed by default.
      *
      * @example
      * ON
@@ -170,14 +142,7 @@ export declare class ModifyPolicyGroupRequestClientType extends $dara.Model {
 export declare class ModifyPolicyGroupRequestDeviceRedirects extends $dara.Model {
     /**
      * @remarks
-     * The peripheral type.
-     *
-     * Valid values:
-     *
-     * *   printer
-     * *   scanner
-     * *   camera
-     * *   adb: the Android Debug Bridge (ADB) device
+     * The type of peripheral device.
      *
      * @example
      * camera
@@ -187,12 +152,6 @@ export declare class ModifyPolicyGroupRequestDeviceRedirects extends $dara.Model
      * @remarks
      * The redirection type.
      *
-     * Valid values:
-     *
-     * *   deviceRedirect: device redirection
-     * *   usbRedirect: USB redirection
-     * *   off: redirection disabled
-     *
      * @example
      * usbRedirect
      */
@@ -211,7 +170,7 @@ export declare class ModifyPolicyGroupRequestDeviceRedirects extends $dara.Model
 export declare class ModifyPolicyGroupRequestDeviceRules extends $dara.Model {
     /**
      * @remarks
-     * The device name.
+     * The name of the device.
      *
      * @example
      * sandisk
@@ -227,20 +186,7 @@ export declare class ModifyPolicyGroupRequestDeviceRules extends $dara.Model {
     devicePid?: string;
     /**
      * @remarks
-     * The peripheral type.
-     *
-     * Valid values:
-     *
-     * *   usbKey: UKeys
-     * *   other: other peripheral devices.
-     * *   graphicsTablet: graphics tablets.
-     * *   printer: printers.
-     * *   cardReader: card readers.
-     * *   scanner: scanners.
-     * *   storage: storage devices.
-     * *   camera: web cameras.
-     * *   adb: Android Debug Bridge (ADB) device
-     * *   networkInterfaceCard: NIC devices.
+     * The type of peripheral device.
      *
      * @example
      * storage
@@ -248,7 +194,7 @@ export declare class ModifyPolicyGroupRequestDeviceRules extends $dara.Model {
     deviceType?: string;
     /**
      * @remarks
-     * The vendor ID (VID). For more information, see [Valid USB VIDs](https://www.usb.org/sites/default/files/vendor_ids032322.pdf_1.pdf).
+     * The vendor ID (VID). For more information, see [Valid USB Vendor IDs](https://www.usb.org/sites/default/files/vendor_ids032322.pdf_1.pdf).
      *
      * @example
      * 0x55b1
@@ -267,12 +213,6 @@ export declare class ModifyPolicyGroupRequestDeviceRules extends $dara.Model {
      * @remarks
      * The redirection type.
      *
-     * Valid values:
-     *
-     * *   deviceRedirect: device redirection
-     * *   usbRedirect: USB redirection.
-     * *   off: redirection disabled
-     *
      * @example
      * usbRedirect
      */
@@ -291,10 +231,10 @@ export declare class ModifyPolicyGroupRequestDeviceRules extends $dara.Model {
 export declare class ModifyPolicyGroupRequestDomainResolveRule extends $dara.Model {
     /**
      * @remarks
-     * The policy description.
+     * The description of the policy.
      *
      * @example
-     * description policy
+     * Policy description.
      */
     description?: string;
     /**
@@ -302,20 +242,15 @@ export declare class ModifyPolicyGroupRequestDomainResolveRule extends $dara.Mod
      * The domain name.
      *
      * @example
-     * *.igetget.com
+     * *.example.com
      */
     domain?: string;
     /**
      * @remarks
      * The resolution policy.
      *
-     * Valid values:
-     *
-     * *   allow
-     * *   block
-     *
      * @example
-     * block
+     * allow
      */
     policy?: string;
     static names(): {
@@ -332,7 +267,7 @@ export declare class ModifyPolicyGroupRequestDomainResolveRule extends $dara.Mod
 export declare class ModifyPolicyGroupRequestRevokeAccessPolicyRule extends $dara.Model {
     /**
      * @remarks
-     * The client CIDR block that you want to delete. Specify an IPv4 CIDR block.
+     * The client IP address range to delete. Specify the value in CIDR notation.
      *
      * @example
      * 47.100.XX.XX/16
@@ -340,7 +275,7 @@ export declare class ModifyPolicyGroupRequestRevokeAccessPolicyRule extends $dar
     cidrIp?: string;
     /**
      * @remarks
-     * The description of the client IP address whitelist that you want to delete.
+     * The description of the client IP address whitelist to delete.
      *
      * @example
      * test
@@ -360,7 +295,7 @@ export declare class ModifyPolicyGroupRequestRevokeAccessPolicyRule extends $dar
 export declare class ModifyPolicyGroupRequestRevokeSecurityPolicyRule extends $dara.Model {
     /**
      * @remarks
-     * The object of the security group rule that you want to delete. The value is an IPv4 CIDR block.
+     * The destination IPv4 address range to delete. Specify the value in CIDR notation.
      *
      * @example
      * 47.100.XX.XX/16
@@ -368,7 +303,7 @@ export declare class ModifyPolicyGroupRequestRevokeSecurityPolicyRule extends $d
     cidrIp?: string;
     /**
      * @remarks
-     * The description of the security group rule that you want to delete.
+     * The description of the security group rule to delete.
      *
      * @example
      * test
@@ -376,15 +311,7 @@ export declare class ModifyPolicyGroupRequestRevokeSecurityPolicyRule extends $d
     description?: string;
     /**
      * @remarks
-     * The protocol type of the security group rule that you want to delete.
-     *
-     * Valid values:
-     *
-     * *   TCP
-     * *   UDP
-     * *   ALL
-     * *   GRE
-     * *   ICMP
+     * The protocol type of the security group rule to delete.
      *
      * @example
      * tcp
@@ -392,12 +319,7 @@ export declare class ModifyPolicyGroupRequestRevokeSecurityPolicyRule extends $d
     ipProtocol?: string;
     /**
      * @remarks
-     * The authorization of the security group rule that you want to delete.
-     *
-     * Valid values:
-     *
-     * *   drop: denies all access requests. If no messages of access denied are returned, the requests timed out or failed.
-     * *   accept (default): accepts all requests.
+     * The policy of the security group rule to delete.
      *
      * @example
      * accept
@@ -405,14 +327,17 @@ export declare class ModifyPolicyGroupRequestRevokeSecurityPolicyRule extends $d
     policy?: string;
     /**
      * @remarks
-     * The port range of the security group rule that you want to delete. The value range of this parameter varies based on the value of the IpProtocol parameter.
+     * The port range of the security group rule to delete. The value of this parameter depends on the \\`IpProtocol\\` parameter:
+     *
+     * - If the protocol is TCP or UDP, the port range is 1 to 65535. Use a forward slash (/) to separate the start and end port numbers. For example: 1/200.
+     *
+     * - If the protocol is ICMP, the port range is -1/-1.
+     *
+     * - If the protocol is GRE, the port range is -1/-1.
      *
-     * *   If the IpProtocol parameter is set to TCP or UDP, the port range is 1 to 65535. Separate the start port number and the end port number with a forward slash (/). Example: 1/200.
-     * *   If the IpProtocol parameter is set to ICMP, set the value to -1/-1.
-     * *   If the IpProtocol parameter is set to GRE, set the value to -1/-1.
-     * *   If the IpProtocol parameter is set to ALL, set the value to -1/-1.
+     * - If IpProtocol is set to all, the port range is -1/-1.
      *
-     * For more information about the common ports applied in EDS, see [Common ports](https://help.aliyun.com/document_detail/40724.html).
+     * For more information about common ports, see [Common ports](https://help.aliyun.com/document_detail/40724.html).
      *
      * @example
      * 22/22
@@ -420,7 +345,7 @@ export declare class ModifyPolicyGroupRequestRevokeSecurityPolicyRule extends $d
     portRange?: string;
     /**
      * @remarks
-     * The priority of the security group rule that you want to delete. A smaller value indicates a higher priority. Valid values: 1 to 60. Default value: 1.
+     * The priority of the security group rule to delete. A smaller value indicates a higher priority. Valid values: 1 to 60. Default value: 1.
      *
      * @example
      * 1
@@ -428,12 +353,7 @@ export declare class ModifyPolicyGroupRequestRevokeSecurityPolicyRule extends $d
     priority?: string;
     /**
      * @remarks
-     * The direction of the security group rule that you want to delete.
-     *
-     * Valid values:
-     *
-     * *   outflow: outbound
-     * *   inflow: inbound
+     * The direction of the security group rule to delete.
      *
      * @example
      * outflow
@@ -453,7 +373,7 @@ export declare class ModifyPolicyGroupRequestRevokeSecurityPolicyRule extends $d
 export declare class ModifyPolicyGroupRequestUsbSupplyRedirectRule extends $dara.Model {
     /**
      * @remarks
-     * The rule description.
+     * The description of the rule.
      *
      * @example
      * Test rule
@@ -461,7 +381,7 @@ export declare class ModifyPolicyGroupRequestUsbSupplyRedirectRule extends $dara
     description?: string;
     /**
      * @remarks
-     * The device class. This parameter is required when `usbRuleType` is set to 1. For more information, see [Defined Class Codes](https://www.usb.org/defined-class-codes).
+     * The device class. This parameter is required when \\`UsbRuleType\\` is set to 1. For more information, see [Defined Class Codes](https://www.usb.org/defined-class-codes).
      *
      * @example
      * 0Eh
@@ -469,7 +389,7 @@ export declare class ModifyPolicyGroupRequestUsbSupplyRedirectRule extends $dara
     deviceClass?: string;
     /**
      * @remarks
-     * The device subclass. This parameter is required when `usbRuleType` is set to 1. For more information, see [Defined Class Codes](https://www.usb.org/defined-class-codes).
+     * The device subclass. This parameter is required when \\`UsbRuleType\\` is set to 1. For more information, see [Defined Class Codes](https://www.usb.org/defined-class-codes).
      *
      * @example
      * xxh
@@ -485,12 +405,7 @@ export declare class ModifyPolicyGroupRequestUsbSupplyRedirectRule extends $dara
     productId?: string;
     /**
      * @remarks
-     * Specifies whether to allow USB redirection.
-     *
-     * Valid values:
-     *
-     * *   1: allows USB redirection.
-     * *   2: forbids USB redirection.
+     * The USB redirection type.
      *
      * @example
      * 1
@@ -498,12 +413,7 @@ export declare class ModifyPolicyGroupRequestUsbSupplyRedirectRule extends $dara
     usbRedirectType?: number;
     /**
      * @remarks
-     * The type of the USB redirection rule.
-     *
-     * Valid values:
-     *
-     * *   1: by device class
-     * *   2: by device vendor
+     * The type of USB redirection rule.
      *
      * @example
      * 1
@@ -511,7 +421,7 @@ export declare class ModifyPolicyGroupRequestUsbSupplyRedirectRule extends $dara
     usbRuleType?: number;
     /**
      * @remarks
-     * The vendor ID (VID). For more information, see [Valid USB VIDs](https://www.usb.org/sites/default/files/vendor_ids032322.pdf_1.pdf).
+     * The vendor ID (VID). For more information, see [Valid USB Vendor IDs](https://www.usb.org/sites/default/files/vendor_ids032322.pdf_1.pdf).
      *
      * @example
      * 04**
@@ -531,9 +441,9 @@ export declare class ModifyPolicyGroupRequestUsbSupplyRedirectRule extends $dara
 export declare class ModifyPolicyGroupRequest extends $dara.Model {
     /**
      * @remarks
-     * Specifies whether end users have the administrator permissions.
+     * Specifies whether a user has administrative permissions after logging on to the cloud computer.
      *
-     * >  This parameter is in invitational preview for specific users and not available to the public.
+     * > This feature is available only for invitational preview. It is not publicly available.
      *
      * @example
      * deny
@@ -541,12 +451,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     adminAccess?: string;
     /**
      * @remarks
-     * Specifies whether to enable the anti-screenshot feature.
-     *
-     * Valid values:
-     *
-     * *   off (default)
-     * *   on
+     * Specifies whether to enable screen capture prevention.
      *
      * @example
      * on
@@ -554,22 +459,17 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     appContentProtection?: string;
     /**
      * @remarks
-     * The client IP address whitelists.
+     * The client IP address whitelist.
      */
     authorizeAccessPolicyRule?: ModifyPolicyGroupRequestAuthorizeAccessPolicyRule[];
     /**
      * @remarks
-     * The security group rules.
+     * A list of security group rules.
      */
     authorizeSecurityPolicyRule?: ModifyPolicyGroupRequestAuthorizeSecurityPolicyRule[];
     /**
      * @remarks
-     * Specifies whether to enable the webcam redirection feature.
-     *
-     * Valid values:
-     *
-     * *   off
-     * *   on (default)
+     * Specifies whether to enable local camera redirection.
      *
      * @example
      * on
@@ -577,19 +477,12 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     cameraRedirect?: string;
     /**
      * @remarks
-     * The logon method control rules to limit the type of the Alibaba Cloud Workspace client used by end users to connect to cloud computers.
+     * A list of logon method control rules.
      */
     clientType?: ModifyPolicyGroupRequestClientType[];
     /**
      * @remarks
-     * The permissions on the clipboard.
-     *
-     * Valid values:
-     *
-     * *   read: specifies one-way transfer. You can copy files only from local devices to cloud computers.
-     * *   readwrite: specifies two-way transfer You can copy files between local devices and cloud computers.
-     * *   write: specifies one-way transfer. You can only copy files from cloud computers to local devices.
-     * *   off: disables both one-way and two-way transfer. Files cannot be copied between local devices and cloud computers.
+     * The clipboard redirection policy.
      *
      * @example
      * off
@@ -602,7 +495,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     deviceRedirects?: ModifyPolicyGroupRequestDeviceRedirects[];
     /**
      * @remarks
-     * The custom peripheral rules.
+     * The custom peripheral device rules.
      *
      * **if can be null:**
      * false
@@ -610,30 +503,20 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     deviceRules?: ModifyPolicyGroupRequestDeviceRules[];
     /**
      * @remarks
-     * Specifies whether the access control for domain names is enabled. Domain names support wildcards (\\*). Separate multiple domain names with commas (,).
-     *
-     * Valid values:
-     *
-     * *   off
-     * *   on
+     * The domain names that can be accessed. Wildcard characters (\\*) are supported. Separate multiple domain names with commas.
      *
      * @example
-     * [black:],example1.com,example2.com
+     * on
      */
     domainList?: string;
     /**
      * @remarks
-     * The domain resolution rules.
+     * The details of the domain name resolution policy.
      */
     domainResolveRule?: ModifyPolicyGroupRequestDomainResolveRule[];
     /**
      * @remarks
-     * The type of the domain name resolution rule.
-     *
-     * Valid values:
-     *
-     * *   OFF
-     * *   ON
+     * The type of domain name resolution policy.
      *
      * @example
      * OFF
@@ -641,12 +524,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     domainResolveRuleType?: string;
     /**
      * @remarks
-     * Specifies whether to turn on the Contact Administrator for Help switch.
-     *
-     * Valid values:
-     *
-     * *   off
-     * *   on
+     * Specifies whether to allow users to request assistance from the administrator.
      *
      * @example
      * on
@@ -654,12 +532,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     endUserApplyAdminCoordinate?: string;
     /**
      * @remarks
-     * Specifies whether to turn on the User Stream Collaboration switch.
-     *
-     * Valid values:
-     *
-     * *   off
-     * *   on
+     * Specifies whether to enable stream collaboration between users.
      *
      * @example
      * on
@@ -667,12 +540,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     endUserGroupCoordinate?: string;
     /**
      * @remarks
-     * Specifies whether to enable the Image Quality Control feature for Graphic-based cloud computers. If you have high requirements on the performance and user experience in scenarios such as professional design, we recommend that you enable this feature.
-     *
-     * Valid values:
-     *
-     * *   off
-     * *   on
+     * Specifies whether to enable the image quality policy for graphics cloud desktops. Enabling this policy improves performance and user experience in professional design scenarios.
      *
      * @example
      * off
@@ -680,14 +548,9 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     gpuAcceleration?: string;
     /**
      * @remarks
-     * Specifies whether to allow web client access.
+     * The policy for access from web clients.
      *
-     * >  We recommend that you specify the ClientType-related parameters to control the Alibaba Cloud Workspace client type for cloud computer connection.``
-     *
-     * Valid values:
-     *
-     * *   off
-     * *   on
+     * > Use the `ClientType` parameter to manage logon methods.
      *
      * @example
      * off
@@ -695,14 +558,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     html5Access?: string;
     /**
      * @remarks
-     * The file transfer feature on the web client.
-     *
-     * Valid values:
-     *
-     * *   all: Files can be uploaded and downloaded between local computers and the web client.
-     * *   download: Files on the web client can be downloaded to local computers.
-     * *   upload: Files on local computers can be uploaded to the web client.
-     * *   off (default): Files cannot be transferred between the web client and local computers.
+     * The policy for file transfers from web clients.
      *
      * @example
      * off
@@ -710,12 +566,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     html5FileTransfer?: string;
     /**
      * @remarks
-     * The protocol for network communication.
-     *
-     * Valid values:
-     *
-     * *   TCP (default): TCP
-     * *   BOTH: TCP and UDP
+     * The network communication protocol.
      *
      * @example
      * BOTH
@@ -723,13 +574,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     internetCommunicationProtocol?: string;
     /**
      * @remarks
-     * The permissions on local disk mapping.
-     *
-     * Valid values:
-     *
-     * *   read: read-only. Local disk mapping is available on cloud computers. However, you can only read (copy) local files but cannot modify the files.
-     * *   readwrite: read and write. Local disk mapping is available on cloud computers. You can read (copy) and write (modify) local files.
-     * *   off (default): no permissions. Local disk mapping is unavailable on cloud computers.
+     * The local disk mapping policy.
      *
      * @example
      * off
@@ -737,7 +582,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     localDrive?: string;
     /**
      * @remarks
-     * The maximum retry period for reconnecting to cloud computers when the cloud computers are disconnected due to none-human reasons. Valid values: 30 to 7200. Unit: seconds.
+     * The maximum amount of time that the client can attempt to reconnect to the cloud computer after an unexpected disconnection. Valid values: 30 to 7200. Unit: seconds.
      *
      * @example
      * 120
@@ -755,12 +600,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
      * @remarks
      * Specifies whether to enable network redirection.
      *
-     * >  This parameter is in invitational preview for specific users and not available to the public.
-     *
-     * Valid values:
-     *
-     * *   off (default)
-     * *   on
+     * > This feature is available only for invitational preview. It is not publicly available.
      *
      * @example
      * on
@@ -778,13 +618,9 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     policyGroupId?: string;
     /**
      * @remarks
-     * The cloud computer preemption feature.
-     *
-     * >  To ensure user experience and data security, when a cloud computer is used by an end user, other end users cannot connect to the cloud computer. By default, this parameter is set to `off`, which cannot be modified.
+     * The policy for preemptible logon.
      *
-     * Valid values:
-     *
-     * *   off (default): Multiple end users cannot connect to the same cloud computer at the same time.
+     * > To ensure the user experience and data security of the current user, other users cannot preempt the cloud computer. This parameter is set to `off` by default and cannot be changed.
      *
      * @example
      * off
@@ -792,19 +628,14 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     preemptLogin?: string;
     /**
      * @remarks
-     * The usernames that are allowed to connect to the cloud computer in use. You can specify up to five usernames.
+     * The usernames of users who can preempt the logon of a cloud computer. You can specify up to five usernames.
      *
-     * >  To ensure user experience and data security, other end users cannot connect to the cloud computer that is used by an end user.
+     * > To ensure the user experience and data security of the current user, other users cannot preempt the cloud computer.
      */
     preemptLoginUser?: string[];
     /**
      * @remarks
-     * The printer redirection feature.
-     *
-     * Valid values:
-     *
-     * *   off
-     * *   on
+     * The printer redirection policy.
      *
      * @example
      * off
@@ -812,12 +643,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     printerRedirection?: string;
     /**
      * @remarks
-     * Specifies whether to enable the custom screen recording feature.
-     *
-     * Valid values:
-     *
-     * *   off (default)
-     * *   on
+     * Specifies whether to enable custom screen recording.
      *
      * @example
      * OFF
@@ -825,7 +651,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     recordContent?: string;
     /**
      * @remarks
-     * The duration in which the custom screen recording is valid. Default value: 30. Unit: days.
+     * The expiration time of custom screen recording files. The default value is 30. Unit: days.
      *
      * @example
      * 30
@@ -833,17 +659,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     recordContentExpires?: number;
     /**
      * @remarks
-     * Specifies whether to enable the screen recording feature.
-     *
-     * Valid values:
-     *
-     * *   byaction_cmd_ft: enables the operation-triggered screen recording upon command execution and file transfer.
-     * *   ALLTIME: enables the whole-process screen recording. That is, the recording starts when cloud computers are connected and ends when the cloud computers are disconnected.
-     * *   session: enables the screen recording for session lifecycle listening.
-     * *   PERIOD: enables the interval-based screen recording. You must specify an interval between the start time and end time of this type of recording.
-     * *   byaction_commands: enables the operation-triggered screen recording upon command execution.
-     * *   OFF: disables the screen recording feature.
-     * *   byaction_file_transfer: enables the operation-triggered screen recording upon file transfer.
+     * Specifies whether to enable screen recording.
      *
      * @example
      * OFF
@@ -851,12 +667,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     recording?: string;
     /**
      * @remarks
-     * Specifies whether to record the audio files generated from cloud computers.
-     *
-     * Valid values:
-     *
-     * *   off: records only video files.
-     * *   on: records video and audio files.
+     * Specifies whether to record audio from the cloud computer.
      *
      * @example
      * on
@@ -864,22 +675,15 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     recordingAudio?: string;
     /**
      * @remarks
-     * The file length of the screen recording. Unit: minutes. Screen recording files are split based on the specified file length and uploaded to Object Storage Service (OSS) buckets. When a screen recording file reaches 300 MB in size, the system preferentially performs rolling update for the file.
-     *
-     * Valid values:
-     *
-     * *   10
-     * *   20
-     * *   30
-     * *   60
+     * The duration for viewing a screen recording file. Unit: minutes. The recorded files are automatically split into chunks and uploaded to a bucket based on the specified duration. When a file reaches 300 MB, it is overwritten on a rolling basis.
      *
      * @example
-     * 15
+     * 10
      */
     recordingDuration?: number;
     /**
      * @remarks
-     * The time when the screen recording stops. Specify the value in the HH:MM:SS format. The value is meaningful only when you set `Recording` to `PERIOD`.
+     * The end time of the screen recording. The time is in the HH:MM:SS format. This parameter is valid only when \\`Recording\\` is set to \\`PERIOD\\`.
      *
      * @example
      * 08:59:00
@@ -887,22 +691,15 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     recordingEndTime?: string;
     /**
      * @remarks
-     * The retention period of the screen recording file. Valid values: 1 to 180. Unit: days.
+     * The retention period of screen recording files. Valid values: 1 to 180. Unit: days.
      *
      * @example
-     * 30
+     * 15
      */
     recordingExpires?: number;
     /**
      * @remarks
-     * The frame rate of screen recording. Unit: fps.
-     *
-     * Valid values:
-     *
-     * *   2
-     * *   5
-     * *   10
-     * *   15
+     * The frame rate for screen recording. Unit: frames per second (fps).
      *
      * @example
      * 5
@@ -910,7 +707,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     recordingFps?: number;
     /**
      * @remarks
-     * The time when the screen recording starts. Specify the value in the HH:MM:SS format. The value is meaningful only when you set the `Recording` parameter to `PERIOD`.
+     * The start time of the screen recording. The time is in the HH:MM:SS format. This parameter is valid only when \\`Recording\\` is set to \\`PERIOD\\`.
      *
      * @example
      * 08:00:00
@@ -918,12 +715,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     recordingStartTime?: string;
     /**
      * @remarks
-     * Specifies whether to enable the screen recording notification feature after end users log on to the Alibaba Cloud Workspace client.
-     *
-     * Valid values:
-     *
-     * *   off
-     * *   on
+     * Specifies whether to send a notification to the client when a screen recording starts.
      *
      * @example
      * off
@@ -931,15 +723,15 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     recordingUserNotify?: string;
     /**
      * @remarks
-     * The notification content of screen recording. By default, this parameter is left empty.
+     * The content of the screen recording notification. This parameter is optional.
      *
      * @example
-     * Your desktop is being recorded.
+     * Your cloud desktop is being recorded.
      */
     recordingUserNotifyMessage?: string;
     /**
      * @remarks
-     * The region ID. You can call the [DescribeRegions](~~DescribeRegions~~) operation to query the regions supported by Elastic Desktop Service (EDS).
+     * The ID of the region. Call [DescribeRegions](~~DescribeRegions~~) to query the regions that WUYING Workspace supports.
      *
      * This parameter is required.
      *
@@ -949,13 +741,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     regionId?: string;
     /**
      * @remarks
-     * The permissions on keyboard and mouse control during remote assistance.
-     *
-     * Valid values:
-     *
-     * *   optionalControl: By default, you are not granted the permissions. You can apply for the permissions.
-     * *   fullControl: You are granted the full permissions.
-     * *   disableControl: You are not granted the permissions.
+     * The remote assistance policy for keyboard and mouse control.
      *
      * @example
      * fullControl
@@ -963,22 +749,17 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     remoteCoordinate?: string;
     /**
      * @remarks
-     * The client IP address whitelists that you want to delete.
+     * The client IP address whitelist to delete.
      */
     revokeAccessPolicyRule?: ModifyPolicyGroupRequestRevokeAccessPolicyRule[];
     /**
      * @remarks
-     * The security group rules that you want to delete.
+     * The security group rules to delete.
      */
     revokeSecurityPolicyRule?: ModifyPolicyGroupRequestRevokeSecurityPolicyRule[];
     /**
      * @remarks
-     * The effective scope of the policy.
-     *
-     * Valid values:
-     *
-     * *   IP: The policy takes effect based on the IP address.
-     * *   GLOBAL: The policy takes effect globally.
+     * The scope of the policy.
      *
      * @example
      * GLOBAL
@@ -986,17 +767,12 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     scope?: string;
     /**
      * @remarks
-     * This parameter is required when the `Scope` parameter is set to `IP`.````
+     * The value of the scope. This parameter is valid only when \\`Scope\\` is set to \\`IP\\`.
      */
     scopeValue?: string[];
     /**
      * @remarks
-     * Specifies whether to enable the USB redirection feature.
-     *
-     * Valid values:
-     *
-     * *   off
-     * *   on
+     * The USB redirection policy.
      *
      * @example
      * off
@@ -1009,7 +785,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     usbSupplyRedirectRule?: ModifyPolicyGroupRequestUsbSupplyRedirectRule[];
     /**
      * @remarks
-     * The multimedia redirection feature.
+     * Specifies whether to enable multimedia redirection.
      *
      * @example
      * on
@@ -1019,26 +795,13 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
      * @remarks
      * The image display quality.
      *
-     * Valid values:
-     *
-     * *   high: high-definition (HD)
-     * *   low: smoothness
-     * *   lossless: no quality loss
-     * *   medium (default): scenario-specific adaptation
-     *
      * @example
      * low
      */
     visualQuality?: string;
     /**
      * @remarks
-     * The watermarking feature.
-     *
-     * Valid values:
-     *
-     * *   blind: Invisible watermarks are applied.
-     * *   off: The watermarking feature is disabled.
-     * *   on: Visible watermarks are applied.
+     * The watermark policy.
      *
      * @example
      * off
@@ -1046,12 +809,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     watermark?: string;
     /**
      * @remarks
-     * Specifies whether to enable the anti-screen photo feature for invisible watermarks.
-     *
-     * Valid values:
-     *
-     * *   off
-     * *   on
+     * Specifies whether to enable the screen capture prevention watermark feature.
      *
      * @example
      * off
@@ -1059,7 +817,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     watermarkAntiCam?: string;
     /**
      * @remarks
-     * The font color in red, green, and blue (RGB) of the watermark. Valid values: 0 to 16777215.
+     * The font color of the watermark. Valid values: 0 to 16777215.
      *
      * @example
      * 0
@@ -1067,7 +825,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     watermarkColor?: number;
     /**
      * @remarks
-     * The watermark rotation. Valid values: -10 to -30.
+     * The angle of the watermark. Valid values: -10 to -30.
      *
      * @example
      * -10
@@ -1075,7 +833,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     watermarkDegree?: number;
     /**
      * @remarks
-     * The watermark font size. Valid values: 10 to 20.
+     * The font size of the watermark. Valid values: 10 to 20.
      *
      * @example
      * 10
@@ -1083,12 +841,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     watermarkFontSize?: number;
     /**
      * @remarks
-     * The watermark font style.
-     *
-     * Valid values:
-     *
-     * *   plain
-     * *   bold
+     * The font style of the watermark.
      *
      * @example
      * plain
@@ -1096,13 +849,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     watermarkFontStyle?: string;
     /**
      * @remarks
-     * The watermark enhancement feature.
-     *
-     * Valid values:
-     *
-     * *   high
-     * *   low
-     * *   medium
+     * The strength of the blind watermark.
      *
      * @example
      * medium
@@ -1112,7 +859,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
      * @remarks
      * The number of watermark rows.
      *
-     * >  This parameter is not available for public use.
+     * > This parameter is not yet available.
      *
      * @example
      * 3
@@ -1120,12 +867,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     watermarkRowAmount?: number;
     /**
      * @remarks
-     * Specifies whether to enable the security priority feature for invisible watermarks.
-     *
-     * Valid values:
-     *
-     * *   off
-     * *   on
+     * The security priority rule for watermarks.
      *
      * @example
      * off
@@ -1133,13 +875,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     watermarkSecurity?: string;
     /**
      * @remarks
-     * The watermark transparency.
-     *
-     * Valid values:
-     *
-     * *   LIGHT (default)
-     * *   DARK
-     * *   MIDDLE
+     * The transparency of the watermark.
      *
      * @example
      * LIGHT
@@ -1147,7 +883,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     watermarkTransparency?: string;
     /**
      * @remarks
-     * The watermark opacity. A larger value indicates more opaque watermarks. Valid values: 10 to 100.
+     * The transparency of the watermark. A larger value indicates lower transparency. Valid values: 10 to 100.
      *
      * @example
      * 10
@@ -1155,18 +891,9 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     watermarkTransparencyValue?: number;
     /**
      * @remarks
-     * The watermark content. You can select up to three items as the watermark content. Separate multiple items with commas (,).
-     *
-     * >  If you set this parameter to `Custom`, you must specify `WatermarkCustomText`.
+     * The type of watermark. You can specify up to three types. Separate them with commas.
      *
-     * Valid values:
-     *
-     * *   EndUserId: the username
-     * *   Custom: the custom text
-     * *   DesktopIp: the IP address of the cloud computer
-     * *   ClientIp: the IP address of the Alibaba Cloud Workspace client
-     * *   HostName: the rightmost 15 digits of the cloud computer ID
-     * *   ClientTime: the current time displayed on the cloud computer
+     * > If you set this parameter to `Custom`, you must also specify the custom text in the `WatermarkCustomText` parameter.
      *
      * @example
      * EndUserId
@@ -1174,12 +901,7 @@ export declare class ModifyPolicyGroupRequest extends $dara.Model {
     watermarkType?: string;
     /**
      * @remarks
-     * Specifies whether to display the Xiaoying AI Assistant entry in the DesktopAssistant menu.
-     *
-     * Valid values:
-     *
-     * *   off: does not display the Xiaoying AI Assistant entry in the DesktopAssistant menu.
-     * *   on: displays the Xiaoying AI Assistant entry in the DesktopAssistant menu.
+     * Specifies whether to display the entry for Alibaba Cloud AI Assistant in the floating bar of the cloud computer.
      *
      * @example
      * on