@alicloud/ddosbgp20180720 3.0.0 → 3.1.1

package/dist/models/ModifyPolicyContentRequest.d.ts

@@ -2,7 +2,7 @@ import * as $dara from '@darabonba/typescript';
 export declare class ModifyPolicyContentRequestContentFingerPrintRuleList extends $dara.Model {
     /**
      * @remarks
-     * The end of the destination port range. Valid values: **0** to **65535**.
+     * The end value of the destination port range. Valid values: **0** to **65535**.
      *
      * This parameter is required.
      *
@@ -12,7 +12,7 @@ export declare class ModifyPolicyContentRequestContentFingerPrintRuleList extend
     dstPortEnd?: number;
     /**
      * @remarks
-     * The start of the destination port range. Valid values: **0** to **65535**.
+     * The start value of the destination port range. Valid values: **0** to **65535**.
      *
      * This parameter is required.
      *
@@ -22,7 +22,7 @@ export declare class ModifyPolicyContentRequestContentFingerPrintRuleList extend
     dstPortStart?: number;
     /**
      * @remarks
-     * The ID of the rule.
+     * The rule ID.
      *
      * @example
      * 83967609-7ea5-4f6d-a6ea-380b09e****
@@ -30,12 +30,7 @@ export declare class ModifyPolicyContentRequestContentFingerPrintRuleList extend
     id?: string;
     /**
      * @remarks
-     * The action triggered if the rule is matched. Valid values:
-     *
-     * *   **permit**: allows the traffic that matches the conditions in the byte-match filter rule.
-     * *   **drop**: discards the traffic that matches the conditions in the byte-match filter rule.
-     * *   **ip_rate**: limits rates on the source IP address whose traffic matches the conditions in the byte-match filter rule. The rate limit is specified by **RateValue**.
-     * *   **session_rate**: limits the number of sessions from the source IP address whose traffic matches the conditions in the byte-match filter rule. The rate limit is specified by **RateValue**.
+     * The action to take when a fingerprint match is found. Valid values:
      *
      * This parameter is required.
      *
@@ -73,7 +68,7 @@ export declare class ModifyPolicyContentRequestContentFingerPrintRuleList extend
     offset?: number;
     /**
      * @remarks
-     * The payload. The value is a hexadecimal string.
+     * The detection payload, expressed in hexadecimal string format.
      *
      * @example
      * abcd
@@ -83,9 +78,6 @@ export declare class ModifyPolicyContentRequestContentFingerPrintRuleList extend
      * @remarks
      * The protocol type. Valid values:
      *
-     * *   **tcp**
-     * *   **udp**
-     *
      * This parameter is required.
      *
      * @example
@@ -94,9 +86,7 @@ export declare class ModifyPolicyContentRequestContentFingerPrintRuleList extend
     protocol?: string;
     /**
      * @remarks
-     * The rate limit. Valid values: **1** to **100000**.
-     *
-     * >  This parameter is required when **MatchAction** is set to **ip_rate** or **session_rate**.
+     * The rate limit value. Valid values: **1** to **100000**.
      *
      * @example
      * 100
@@ -104,9 +94,7 @@ export declare class ModifyPolicyContentRequestContentFingerPrintRuleList extend
     rateValue?: number;
     /**
      * @remarks
-     * The sequence number that indicates the order for the rule to take effect. The value is an integer.
-     *
-     * >  A smaller number indicates a higher priority.
+     * The priority number, expressed as an integer.
      *
      * This parameter is required.
      *
@@ -116,7 +104,7 @@ export declare class ModifyPolicyContentRequestContentFingerPrintRuleList extend
     seqNo?: number;
     /**
      * @remarks
-     * The end of the source port range. Valid values: **0** to **65535**.
+     * The end value of the source port range. Valid values: **0** to **65535**.
      *
      * This parameter is required.
      *
@@ -126,7 +114,7 @@ export declare class ModifyPolicyContentRequestContentFingerPrintRuleList extend
     srcPortEnd?: number;
     /**
      * @remarks
-     * The start of the source port range. Valid values: **0** to **65535**.
+     * The start value of the source port range. Valid values: **0** to **65535**.
      *
      * This parameter is required.
      *
@@ -146,7 +134,21 @@ export declare class ModifyPolicyContentRequestContentFingerPrintRuleList extend
     });
 }
 export declare class ModifyPolicyContentRequestContentL4RuleListConditionListOffset extends $dara.Model {
+    /**
+     * @remarks
+     * The end position. Valid values: **0** to **1499**.
+     *
+     * @example
+     * 1499
+     */
     end?: number;
+    /**
+     * @remarks
+     * The start position. Valid values: **0** to **1499**.
+     *
+     * @example
+     * 0
+     */
     start?: number;
     static names(): {
         [key: string]: string;
@@ -162,29 +164,52 @@ export declare class ModifyPolicyContentRequestContentL4RuleListConditionListOff
 export declare class ModifyPolicyContentRequestContentL4RuleListConditionList extends $dara.Model {
     /**
      * @remarks
-     * The term that is used for matching.
-     *
-     * >  If Method is set to **char**, the value of this parameter must be ASCII strings. If Method is set to **hex**, the value of this parameter must be hexadecimal strings. Maximum length: 2,048.
+     * The detection content.
      *
      * @example
      * abcd
      */
     arg?: string;
+    /**
+     * @remarks
+     * The matching content.
+     *
+     * @example
+     * test**
+     */
     content?: string;
     /**
      * @remarks
-     * The number of bytes from the start position for matching. Valid values: **1** to **2048**.
+     * The detection window length. Valid values: **1** to **2048**.
      *
      * @example
      * 1200
      */
     depth?: number;
+    /**
+     * @remarks
+     * The character type. Valid values:
+     *
+     * @example
+     * str
+     */
     encode?: string;
+    /**
+     * @remarks
+     * The matching range.
+     */
     offset?: ModifyPolicyContentRequestContentL4RuleListConditionListOffset;
+    /**
+     * @remarks
+     * The matching pattern. Valid values:
+     *
+     * @example
+     * contain
+     */
     pattern?: string;
     /**
      * @remarks
-     * The start position for matching. Valid values: **0** to **2047**.
+     * The detection start position. Valid values: **0** to **2047**.
      *
      * @example
      * 0
@@ -204,9 +229,7 @@ export declare class ModifyPolicyContentRequestContentL4RuleListConditionList ex
 export declare class ModifyPolicyContentRequestContentL4RuleList extends $dara.Model {
     /**
      * @remarks
-     * The action that is specified in the rule. Valid value:
-     *
-     * *   **2**: The traffic is discarded.
+     * The action.
      *
      * @example
      * 2
@@ -214,12 +237,12 @@ export declare class ModifyPolicyContentRequestContentL4RuleList extends $dara.M
     action?: string;
     /**
      * @remarks
-     * The match conditions.
+     * The list of detection conditions.
      */
     conditionList?: ModifyPolicyContentRequestContentL4RuleListConditionList[];
     /**
      * @remarks
-     * The minimum number of bytes in a session to trigger matching. Valid values: **0** to **2048**.
+     * The minimum number of bytes in a session flow that triggers rule matching. Valid values: **0** to **2048**.
      *
      * @example
      * 0
@@ -227,10 +250,7 @@ export declare class ModifyPolicyContentRequestContentL4RuleList extends $dara.M
     limited?: number;
     /**
      * @remarks
-     * The condition based on which an action is performed. Valid values:
-     *
-     * *   **0**: If the rule is matched, the action specified in the rule is performed.
-     * *   **1**: If the rule is not matched, the action specified in the rule is performed.
+     * The logical operator. Valid values:
      *
      * @example
      * 0
@@ -238,10 +258,7 @@ export declare class ModifyPolicyContentRequestContentL4RuleList extends $dara.M
     match?: string;
     /**
      * @remarks
-     * The type of the rule. Valid values:
-     *
-     * *   **char**: string match.
-     * *   **hex**: hexadecimal string match.
+     * The rule type. Valid values:
      *
      * @example
      * char
@@ -249,7 +266,7 @@ export declare class ModifyPolicyContentRequestContentL4RuleList extends $dara.M
     method?: string;
     /**
      * @remarks
-     * The name of the rule.
+     * The rule name.
      *
      * This parameter is required.
      *
@@ -259,9 +276,7 @@ export declare class ModifyPolicyContentRequestContentL4RuleList extends $dara.M
     name?: string;
     /**
      * @remarks
-     * The priority of the rule. Valid values: 1 to 100.
-     *
-     * >  A smaller value indicates a higher priority.
+     * The rule priority. Valid values: 1 to 100.
      *
      * @example
      * 1
@@ -281,7 +296,7 @@ export declare class ModifyPolicyContentRequestContentL4RuleList extends $dara.M
 export declare class ModifyPolicyContentRequestContentPortRuleList extends $dara.Model {
     /**
      * @remarks
-     * The end of the destination port range. Valid values: **0** to **65535**.
+     * The end value of the destination port range. Valid values: **0** to **65535**.
      *
      * This parameter is required.
      *
@@ -291,7 +306,7 @@ export declare class ModifyPolicyContentRequestContentPortRuleList extends $dara
     dstPortEnd?: number;
     /**
      * @remarks
-     * The start of the destination port range. Valid values: **0** to **65535**.
+     * The start value of the destination port range. Valid values: **0** to **65535**.
      *
      * This parameter is required.
      *
@@ -301,7 +316,7 @@ export declare class ModifyPolicyContentRequestContentPortRuleList extends $dara
     dstPortStart?: number;
     /**
      * @remarks
-     * The ID of the rule.
+     * The rule ID.
      *
      * @example
      * 412a7312-58ff-4e32-a202-0ab0*******
@@ -309,9 +324,7 @@ export declare class ModifyPolicyContentRequestContentPortRuleList extends $dara
     id?: string;
     /**
      * @remarks
-     * The action triggered if the rule is matched. Valid values:
-     *
-     * *   **drop**: The traffic is discarded.
+     * The match action. Valid values:
      *
      * This parameter is required.
      *
@@ -323,9 +336,6 @@ export declare class ModifyPolicyContentRequestContentPortRuleList extends $dara
      * @remarks
      * The protocol type. Valid values:
      *
-     * *   **tcp**
-     * *   **udp**
-     *
      * This parameter is required.
      *
      * @example
@@ -334,9 +344,7 @@ export declare class ModifyPolicyContentRequestContentPortRuleList extends $dara
     protocol?: string;
     /**
      * @remarks
-     * The sequence number that indicates the order for the rule to take effect. The value is an integer.
-     *
-     * >  A smaller number indicates a higher priority.
+     * The priority number, expressed as an integer.
      *
      * This parameter is required.
      *
@@ -346,7 +354,7 @@ export declare class ModifyPolicyContentRequestContentPortRuleList extends $dara
     seqNo?: number;
     /**
      * @remarks
-     * The end of the source port range. Valid values: **0** to **65535**.
+     * The end value of the source port range. Valid values: **0** to **65535**.
      *
      * This parameter is required.
      *
@@ -356,7 +364,7 @@ export declare class ModifyPolicyContentRequestContentPortRuleList extends $dara
     srcPortEnd?: number;
     /**
      * @remarks
-     * The start of the source port range. Valid values: **0** to **65535**.
+     * The start value of the source port range. Valid values: **0** to **65535**.
      *
      * This parameter is required.
      *
@@ -375,10 +383,85 @@ export declare class ModifyPolicyContentRequestContentPortRuleList extends $dara
         [key: string]: any;
     });
 }
+export declare class ModifyPolicyContentRequestContentSipDefense extends $dara.Model {
+    /**
+     * @remarks
+     * Specifies whether to enable SIP protection. Valid values:
+     *
+     * @example
+     * true
+     */
+    enable?: boolean;
+    /**
+     * @remarks
+     * The SIP protection level.
+     *
+     * @example
+     * normal
+     */
+    level?: string;
+    /**
+     * @remarks
+     * Specifies whether to enable SIP defense mode.
+     */
+    sipDefend?: boolean;
+    /**
+     * @remarks
+     * Specifies whether to enable SIP learning mode.
+     */
+    sipLearn?: boolean;
+    /**
+     * @remarks
+     * Specifies whether to enable the SIP source rate limiting module.
+     */
+    sipModule?: boolean;
+    /**
+     * @remarks
+     * The SIP protection port. Valid values: **1** to **65535**.
+     *
+     * @example
+     * 5060
+     */
+    sipPort?: string;
+    /**
+     * @remarks
+     * The SIP source rate limit value in PPS.
+     *
+     * @example
+     * 1000
+     */
+    sipRate?: number;
+    /**
+     * @remarks
+     * The SIP activation threshold in Mbit/s.
+     *
+     * @example
+     * 100
+     */
+    sipStartMbps?: number;
+    /**
+     * @remarks
+     * The SIP activation threshold in PPS.
+     *
+     * @example
+     * 500
+     */
+    sipStartPps?: number;
+    static names(): {
+        [key: string]: string;
+    };
+    static types(): {
+        [key: string]: any;
+    };
+    validate(): void;
+    constructor(map?: {
+        [key: string]: any;
+    });
+}
 export declare class ModifyPolicyContentRequestContentSourceBlockList extends $dara.Model {
     /**
      * @remarks
-     * The validity period of the blacklist to which the source IP address is added. Unit: seconds.
+     * The duration for which the source IP address is added to the blacklist. Unit: seconds.
      *
      * This parameter is required.
      *
@@ -388,7 +471,7 @@ export declare class ModifyPolicyContentRequestContentSourceBlockList extends $d
     blockExpireSeconds?: number;
     /**
      * @remarks
-     * The statistical period during which the system collects data on source IP addresses to determine whether to add the source IP addresses to the blacklist. Unit: seconds.
+     * The statistical period for source rate limiting blacklisting. Unit: seconds.
      *
      * This parameter is required.
      *
@@ -398,7 +481,7 @@ export declare class ModifyPolicyContentRequestContentSourceBlockList extends $d
     everySeconds?: number;
     /**
      * @remarks
-     * The number of times that the source IP address exceeds a limit in a statistical period.
+     * The number of times the source IP address exceeds the rate limit within one statistical period.
      *
      * This parameter is required.
      *
@@ -408,12 +491,7 @@ export declare class ModifyPolicyContentRequestContentSourceBlockList extends $d
     exceedLimitTimes?: number;
     /**
      * @remarks
-     * The type of the source rate limit. Valid values:
-     *
-     * *   **3**: the pps limit on source IP addresses.
-     * *   **4**: the bandwidth limit on source IP addresses.
-     * *   **5**: the pps limit on source SYN packets.
-     * *   **6**: the bandwidth limit on source SYN packets.
+     * The source rate limiting type. Valid values:
      *
      * This parameter is required.
      *
@@ -435,7 +513,7 @@ export declare class ModifyPolicyContentRequestContentSourceBlockList extends $d
 export declare class ModifyPolicyContentRequestContentSourceLimit extends $dara.Model {
     /**
      * @remarks
-     * The bandwidth limit on source IP addresses. Unit: bytes per second.
+     * The source bandwidth throttling value, in bytes per second.
      *
      * @example
      * 2048
@@ -443,7 +521,7 @@ export declare class ModifyPolicyContentRequestContentSourceLimit extends $dara.
     bps?: number;
     /**
      * @remarks
-     * The packets per second (pps) limit on source IP addresses.
+     * The source PPS rate limit, in packets per second.
      *
      * @example
      * 64
@@ -451,7 +529,7 @@ export declare class ModifyPolicyContentRequestContentSourceLimit extends $dara.
     pps?: number;
     /**
      * @remarks
-     * The bandwidth limit on source SYN packets. Unit: bytes per second.
+     * The source SYN bandwidth throttling value, in bytes per second.
      *
      * @example
      * 2048
@@ -459,7 +537,7 @@ export declare class ModifyPolicyContentRequestContentSourceLimit extends $dara.
     synBps?: number;
     /**
      * @remarks
-     * The pps limit on source SYN packets.
+     * The source SYN PPS rate limit, in packets per second.
      *
      * @example
      * 64
@@ -479,7 +557,7 @@ export declare class ModifyPolicyContentRequestContentSourceLimit extends $dara.
 export declare class ModifyPolicyContentRequestContent extends $dara.Model {
     /**
      * @remarks
-     * The validity period of the IP address blacklist. The value is a UNIX timestamp.
+     * The expiration time of the IP blacklist (UNIX timestamp).
      *
      * @example
      * 1716878000
@@ -487,7 +565,7 @@ export declare class ModifyPolicyContentRequestContent extends $dara.Model {
     blackIpListExpireAt?: number;
     /**
      * @remarks
-     * Specifies whether to enable ICMP blocking.
+     * Specifies whether to disable the ICMP protocol.
      *
      * @example
      * true
@@ -495,7 +573,7 @@ export declare class ModifyPolicyContentRequestContent extends $dara.Model {
     enableDropIcmp?: boolean;
     /**
      * @remarks
-     * Specifies whether to enable intelligent protection.
+     * Specifies whether to enable AI-based intelligent protection.
      *
      * @example
      * true
@@ -503,7 +581,7 @@ export declare class ModifyPolicyContentRequestContent extends $dara.Model {
     enableIntelligence?: boolean;
     /**
      * @remarks
-     * Specifies whether to enable port-specific mitigation.
+     * Specifies whether to enable port protection.
      *
      * @example
      * true
@@ -511,16 +589,12 @@ export declare class ModifyPolicyContentRequestContent extends $dara.Model {
     enableL4Defense?: boolean;
     /**
      * @remarks
-     * The byte-match filter rules.
+     * The list of byte-match filter rules.
      */
     fingerPrintRuleList?: ModifyPolicyContentRequestContentFingerPrintRuleList[];
     /**
      * @remarks
-     * The level of intelligent protection. Valid values:
-     *
-     * *   **default**: normal.
-     * *   **hard**: strict.
-     * *   **weak**: loose.
+     * The protection level of AI-based intelligent protection. Valid values:
      *
      * @example
      * default
@@ -528,42 +602,47 @@ export declare class ModifyPolicyContentRequestContent extends $dara.Model {
     intelligenceLevel?: string;
     /**
      * @remarks
-     * The port-specific mitigation rules.
+     * The list of port-specific mitigation rules.
      */
     l4RuleList?: ModifyPolicyContentRequestContentL4RuleList[];
     /**
      * @remarks
-     * The port blocking rules.
+     * The list of port blocking rules.
      */
     portRuleList?: ModifyPolicyContentRequestContentPortRuleList[];
     /**
      * @remarks
-     * The ports whose traffic is filtered out by the filtering policies for UDP reflection attacks.
+     * The list of ports filtered by reflection attack prevention.
      */
     reflectBlockUdpPortList?: number[];
     /**
      * @remarks
-     * The countries in the location blacklist.
+     * The list of countries for location blacklist.
      */
     regionBlockCountryList?: number[];
     /**
      * @remarks
-     * The provinces in the location blacklist.
+     * The list of provinces for location blacklist.
      */
     regionBlockProvinceList?: number[];
     /**
      * @remarks
-     * The source IP addresses that are added to the blacklist.
+     * The SIP Protection Settings.
+     */
+    sipDefense?: ModifyPolicyContentRequestContentSipDefense;
+    /**
+     * @remarks
+     * The source rate limiting blacklist.
      */
     sourceBlockList?: ModifyPolicyContentRequestContentSourceBlockList[];
     /**
      * @remarks
-     * The settings for source rate limiting.
+     * The source rate limiting configuration.
      */
     sourceLimit?: ModifyPolicyContentRequestContentSourceLimit;
     /**
      * @remarks
-     * Specifies whether to add back-to-origin CIDR blocks of Anti-DDoS Proxy to the whitelist.
+     * Specifies whether to whitelist the back-to-origin IP addresses of Anti-DDoS Pro and Anti-DDoS Premium (the Chinese mainland & outside the Chinese mainland).
      *
      * @example
      * false
@@ -588,7 +667,7 @@ export declare class ModifyPolicyContentRequest extends $dara.Model {
     content?: ModifyPolicyContentRequestContent;
     /**
      * @remarks
-     * The ID of the policy.
+     * The policy ID.
      *
      * This parameter is required.
      *
@@ -598,12 +677,19 @@ export declare class ModifyPolicyContentRequest extends $dara.Model {
     id?: string;
     /**
      * @remarks
-     * The name of the policy.
+     * The policy name.
      *
      * @example
      * demo**
      */
     name?: string;
+    /**
+     * @remarks
+     * The version of the port-specific mitigation policy. Valid values:
+     *
+     * @example
+     * 2
+     */
     portVersion?: string;
     static names(): {
         [key: string]: string;

package/dist/models/ModifyPolicyContentRequest.js

@@ -33,7 +33,7 @@ var __importStar = (this && this.__importStar) || (function () {
     };
 })();
 Object.defineProperty(exports, "__esModule", { value: true });
-exports.ModifyPolicyContentRequest = exports.ModifyPolicyContentRequestContent = exports.ModifyPolicyContentRequestContentSourceLimit = exports.ModifyPolicyContentRequestContentSourceBlockList = exports.ModifyPolicyContentRequestContentPortRuleList = exports.ModifyPolicyContentRequestContentL4RuleList = exports.ModifyPolicyContentRequestContentL4RuleListConditionList = exports.ModifyPolicyContentRequestContentL4RuleListConditionListOffset = exports.ModifyPolicyContentRequestContentFingerPrintRuleList = void 0;
+exports.ModifyPolicyContentRequest = exports.ModifyPolicyContentRequestContent = exports.ModifyPolicyContentRequestContentSourceLimit = exports.ModifyPolicyContentRequestContentSourceBlockList = exports.ModifyPolicyContentRequestContentSipDefense = exports.ModifyPolicyContentRequestContentPortRuleList = exports.ModifyPolicyContentRequestContentL4RuleList = exports.ModifyPolicyContentRequestContentL4RuleListConditionList = exports.ModifyPolicyContentRequestContentL4RuleListConditionListOffset = exports.ModifyPolicyContentRequestContentFingerPrintRuleList = void 0;
 // This file is auto-generated, don't edit it
 const $dara = __importStar(require("@darabonba/typescript"));
 class ModifyPolicyContentRequestContentFingerPrintRuleList extends $dara.Model {
@@ -201,6 +201,41 @@ class ModifyPolicyContentRequestContentPortRuleList extends $dara.Model {
     }
 }
 exports.ModifyPolicyContentRequestContentPortRuleList = ModifyPolicyContentRequestContentPortRuleList;
+class ModifyPolicyContentRequestContentSipDefense extends $dara.Model {
+    static names() {
+        return {
+            enable: 'Enable',
+            level: 'Level',
+            sipDefend: 'SipDefend',
+            sipLearn: 'SipLearn',
+            sipModule: 'SipModule',
+            sipPort: 'SipPort',
+            sipRate: 'SipRate',
+            sipStartMbps: 'SipStartMbps',
+            sipStartPps: 'SipStartPps',
+        };
+    }
+    static types() {
+        return {
+            enable: 'boolean',
+            level: 'string',
+            sipDefend: 'boolean',
+            sipLearn: 'boolean',
+            sipModule: 'boolean',
+            sipPort: 'string',
+            sipRate: 'number',
+            sipStartMbps: 'number',
+            sipStartPps: 'number',
+        };
+    }
+    validate() {
+        super.validate();
+    }
+    constructor(map) {
+        super(map);
+    }
+}
+exports.ModifyPolicyContentRequestContentSipDefense = ModifyPolicyContentRequestContentSipDefense;
 class ModifyPolicyContentRequestContentSourceBlockList extends $dara.Model {
     static names() {
         return {
@@ -265,6 +300,7 @@ class ModifyPolicyContentRequestContent extends $dara.Model {
             reflectBlockUdpPortList: 'ReflectBlockUdpPortList',
             regionBlockCountryList: 'RegionBlockCountryList',
             regionBlockProvinceList: 'RegionBlockProvinceList',
+            sipDefense: 'SipDefense',
             sourceBlockList: 'SourceBlockList',
             sourceLimit: 'SourceLimit',
             whitenGfbrNets: 'WhitenGfbrNets',
@@ -283,6 +319,7 @@ class ModifyPolicyContentRequestContent extends $dara.Model {
             reflectBlockUdpPortList: { 'type': 'array', 'itemType': 'number' },
             regionBlockCountryList: { 'type': 'array', 'itemType': 'number' },
             regionBlockProvinceList: { 'type': 'array', 'itemType': 'number' },
+            sipDefense: ModifyPolicyContentRequestContentSipDefense,
             sourceBlockList: { 'type': 'array', 'itemType': ModifyPolicyContentRequestContentSourceBlockList },
             sourceLimit: ModifyPolicyContentRequestContentSourceLimit,
             whitenGfbrNets: 'boolean',
@@ -307,6 +344,9 @@ class ModifyPolicyContentRequestContent extends $dara.Model {
         if (Array.isArray(this.regionBlockProvinceList)) {
             $dara.Model.validateArray(this.regionBlockProvinceList);
         }
+        if (this.sipDefense && typeof this.sipDefense.validate === 'function') {
+            this.sipDefense.validate();
+        }
         if (Array.isArray(this.sourceBlockList)) {
             $dara.Model.validateArray(this.sourceBlockList);
         }