@alicloud/ddosbgp20180720 3.0.0 → 3.1.0

package/dist/models/ListPolicyResponseBody.d.ts

@@ -2,7 +2,7 @@ import * as $dara from '@darabonba/typescript';
 export declare class ListPolicyResponseBodyPolicyListContentFingerPrintRuleList extends $dara.Model {
     /**
      * @remarks
-     * The end of the destination port range. Valid values: **0** to **65535**.
+     * The end value of the destination port range. Valid values: **0** to **65535**.
      *
      * @example
      * 65535
@@ -10,7 +10,7 @@ export declare class ListPolicyResponseBodyPolicyListContentFingerPrintRuleList
     dstPortEnd?: number;
     /**
      * @remarks
-     * The start of the destination port range. Valid values: **0** to **65535**.
+     * The start value of the destination port range. Valid values: **0** to **65535**.
      *
      * @example
      * 0
@@ -18,7 +18,7 @@ export declare class ListPolicyResponseBodyPolicyListContentFingerPrintRuleList
     dstPortStart?: number;
     /**
      * @remarks
-     * The ID of the rule.
+     * The rule ID.
      *
      * @example
      * 2c0b09cd-a565-4481-9acb-418b********
@@ -26,12 +26,7 @@ export declare class ListPolicyResponseBodyPolicyListContentFingerPrintRuleList
     id?: string;
     /**
      * @remarks
-     * The action triggered if the rule is matched. Valid values:
-     *
-     * *   **accept**: allows the traffic that matches the conditions in the byte-match filter rule.
-     * *   **drop**: discards the traffic that matches the conditions in the byte-match filter rule.
-     * *   **ip_rate**: limits rates on the source IP address whose traffic matches the conditions in the byte-match filter rule. The rate limit is specified by **RateValue**.
-     * *   **session_rate**: limits the number of sessions from the source IP address whose traffic matches the conditions in the byte-match filter rule. The rate limit is specified by **RateValue**.
+     * The match action. Valid values:
      *
      * @example
      * drop
@@ -63,7 +58,7 @@ export declare class ListPolicyResponseBodyPolicyListContentFingerPrintRuleList
     offset?: number;
     /**
      * @remarks
-     * The payload. The value is a hexadecimal string.
+     * The detection payload, represented in hexadecimal string format.
      *
      * @example
      * abcd
@@ -73,18 +68,13 @@ export declare class ListPolicyResponseBodyPolicyListContentFingerPrintRuleList
      * @remarks
      * The protocol type. Valid values:
      *
-     * *   **tcp**
-     * *   **udp**
-     *
      * @example
      * udp
      */
     protocol?: string;
     /**
      * @remarks
-     * The rate limit. Valid values: **1** to **100000**.
-     *
-     * >  This parameter is required when **MatchAction** is set to **ip_rate** or **session_rate**.
+     * The rate limit value. Valid values: **1** to **100000**.
      *
      * @example
      * 1000
@@ -92,7 +82,7 @@ export declare class ListPolicyResponseBodyPolicyListContentFingerPrintRuleList
     rateValue?: number;
     /**
      * @remarks
-     * The sequence number that indicates the order for the rule to take effect. The value is an integer.
+     * The priority number, represented as an integer.
      *
      * @example
      * 1
@@ -100,7 +90,7 @@ export declare class ListPolicyResponseBodyPolicyListContentFingerPrintRuleList
     seqNo?: number;
     /**
      * @remarks
-     * The end of the source port range. Valid values: **0** to **65535**.
+     * The end value of the source port range. Valid values: **0** to **65535**.
      *
      * @example
      * 65535
@@ -108,7 +98,7 @@ export declare class ListPolicyResponseBodyPolicyListContentFingerPrintRuleList
     srcPortEnd?: number;
     /**
      * @remarks
-     * The start of the source port range. Valid values: **0** to **65535**.
+     * The start value of the source port range. Valid values: **0** to **65535**.
      *
      * @example
      * 0
@@ -126,7 +116,21 @@ export declare class ListPolicyResponseBodyPolicyListContentFingerPrintRuleList
     });
 }
 export declare class ListPolicyResponseBodyPolicyListContentL4RuleListConditionListOffset extends $dara.Model {
+    /**
+     * @remarks
+     * The end position. Valid values: **0** to **1499**.
+     *
+     * @example
+     * 1499
+     */
     end?: number;
+    /**
+     * @remarks
+     * The start position. Valid values: **0** to **1499**.
+     *
+     * @example
+     * 0
+     */
     start?: number;
     static names(): {
         [key: string]: string;
@@ -142,29 +146,52 @@ export declare class ListPolicyResponseBodyPolicyListContentL4RuleListConditionL
 export declare class ListPolicyResponseBodyPolicyListContentL4RuleListConditionList extends $dara.Model {
     /**
      * @remarks
-     * The term that is used for matching.
-     *
-     * >  If Method is set to **char**, the value of this parameter must be ASCII strings. If Method is set to **hex**, the value of this parameter must be hexadecimal strings. Maximum length: 2,048.
+     * The detection content.
      *
      * @example
      * test
      */
     arg?: string;
+    /**
+     * @remarks
+     * The match content.
+     *
+     * @example
+     * test**
+     */
     content?: string;
     /**
      * @remarks
-     * The number of bytes from the start position for matching. Valid values: **1** to **2048**.
+     * The detection window length. Valid values: **1** to **2048**.
      *
      * @example
      * 32
      */
     depth?: number;
+    /**
+     * @remarks
+     * The character type. Valid values:
+     *
+     * @example
+     * str
+     */
     encode?: string;
+    /**
+     * @remarks
+     * The match range.
+     */
     offset?: ListPolicyResponseBodyPolicyListContentL4RuleListConditionListOffset;
+    /**
+     * @remarks
+     * The match pattern. Valid values:
+     *
+     * @example
+     * contain
+     */
     pattern?: string;
     /**
      * @remarks
-     * The start position for matching. Valid values: **0** to **2047**.
+     * The detection start position. Valid values: **0** to **2047**.
      *
      * @example
      * 0
@@ -184,9 +211,7 @@ export declare class ListPolicyResponseBodyPolicyListContentL4RuleListConditionL
 export declare class ListPolicyResponseBodyPolicyListContentL4RuleList extends $dara.Model {
     /**
      * @remarks
-     * The action that is specified in the rule. Valid value:
-     *
-     * *   **2**: The traffic is discarded.
+     * The action. Valid values:
      *
      * @example
      * 2
@@ -194,12 +219,12 @@ export declare class ListPolicyResponseBodyPolicyListContentL4RuleList extends $
     action?: string;
     /**
      * @remarks
-     * The match conditions.
+     * The list of detection conditions.
      */
     conditionList?: ListPolicyResponseBodyPolicyListContentL4RuleListConditionList[];
     /**
      * @remarks
-     * The minimum number of bytes in a session to trigger matching. Valid values: **0** to **2048**.
+     * The minimum number of bytes in a session flow to trigger rule matching. Valid values: **0** to **2048**.
      *
      * @example
      * 0
@@ -207,10 +232,7 @@ export declare class ListPolicyResponseBodyPolicyListContentL4RuleList extends $
     limited?: number;
     /**
      * @remarks
-     * The condition based on which an action is performed. Valid values:
-     *
-     * *   **0**: If the rule is matched, the action specified in the rule is performed.
-     * *   **1**: If the rule is not matched, the action specified in the rule is performed.
+     * The logical operator. Valid values:
      *
      * @example
      * 1
@@ -218,10 +240,7 @@ export declare class ListPolicyResponseBodyPolicyListContentL4RuleList extends $
     match?: string;
     /**
      * @remarks
-     * The type of the rule. Valid values:
-     *
-     * *   **char**: string match.
-     * *   **hex**: hexadecimal string match.
+     * The rule type. Valid values:
      *
      * @example
      * char
@@ -229,7 +248,7 @@ export declare class ListPolicyResponseBodyPolicyListContentL4RuleList extends $
     method?: string;
     /**
      * @remarks
-     * The name of the rule.
+     * The rule name.
      *
      * @example
      * test**
@@ -237,7 +256,7 @@ export declare class ListPolicyResponseBodyPolicyListContentL4RuleList extends $
     name?: string;
     /**
      * @remarks
-     * The priority of the rule.
+     * The rule priority.
      *
      * @example
      * 1
@@ -257,7 +276,7 @@ export declare class ListPolicyResponseBodyPolicyListContentL4RuleList extends $
 export declare class ListPolicyResponseBodyPolicyListContentPortRuleList extends $dara.Model {
     /**
      * @remarks
-     * The end of the destination port range. Valid values: **0** to **65535**.
+     * The end value of the destination port range. Valid values: **0** to **65535**.
      *
      * @example
      * 65535
@@ -265,7 +284,7 @@ export declare class ListPolicyResponseBodyPolicyListContentPortRuleList extends
     dstPortEnd?: number;
     /**
      * @remarks
-     * The start of the destination port range. Valid values: **0** to **65535**.
+     * The start value of the destination port range. Valid values: **0** to **65535**.
      *
      * @example
      * 0
@@ -273,7 +292,7 @@ export declare class ListPolicyResponseBodyPolicyListContentPortRuleList extends
     dstPortStart?: number;
     /**
      * @remarks
-     * The ID of the rule.
+     * The rule ID.
      *
      * @example
      * 8f3c3062-6c20-425d-8405-2bd1********
@@ -281,9 +300,7 @@ export declare class ListPolicyResponseBodyPolicyListContentPortRuleList extends
     id?: string;
     /**
      * @remarks
-     * The action triggered if the rule is matched. Valid value:
-     *
-     * *   **drop**: The traffic is discarded.
+     * The match action. Valid values:
      *
      * @example
      * drop
@@ -293,16 +310,13 @@ export declare class ListPolicyResponseBodyPolicyListContentPortRuleList extends
      * @remarks
      * The protocol type. Valid values:
      *
-     * *   **tcp**
-     * *   **udp**
-     *
      * @example
      * udp
      */
     protocol?: string;
     /**
      * @remarks
-     * The sequence number that indicates the order for the rule to take effect. The value is an integer.
+     * The priority number, represented as an integer.
      *
      * @example
      * 1
@@ -310,7 +324,7 @@ export declare class ListPolicyResponseBodyPolicyListContentPortRuleList extends
     seqNo?: number;
     /**
      * @remarks
-     * The end of the source port range. Valid values: **0** to **65535**.
+     * The end value of the source port range. Valid values: **0** to **65535**.
      *
      * @example
      * 65535
@@ -318,7 +332,7 @@ export declare class ListPolicyResponseBodyPolicyListContentPortRuleList extends
     srcPortEnd?: number;
     /**
      * @remarks
-     * The start of the source port range. Valid values: **0** to **65535**.
+     * The start value of the source port range. Valid values: **0** to **65535**.
      *
      * @example
      * 0
@@ -335,10 +349,85 @@ export declare class ListPolicyResponseBodyPolicyListContentPortRuleList extends
         [key: string]: any;
     });
 }
+export declare class ListPolicyResponseBodyPolicyListContentSipDefense extends $dara.Model {
+    /**
+     * @remarks
+     * Indicates whether SIP protection is enabled. Valid values:
+     *
+     * @example
+     * true
+     */
+    enable?: boolean;
+    /**
+     * @remarks
+     * The SIP protection level.
+     *
+     * @example
+     * normal
+     */
+    level?: string;
+    /**
+     * @remarks
+     * The switch for the SIP defense mode.
+     */
+    sipDefend?: boolean;
+    /**
+     * @remarks
+     * The switch for the SIP learning mode.
+     */
+    sipLearn?: boolean;
+    /**
+     * @remarks
+     * The switch for the SIP source rate limiting module.
+     */
+    sipModule?: boolean;
+    /**
+     * @remarks
+     * The SIP protection port. Valid values: **1** to **65535**.
+     *
+     * @example
+     * 5060
+     */
+    sipPort?: string;
+    /**
+     * @remarks
+     * The SIP source rate limit value (PPS).
+     *
+     * @example
+     * 1000
+     */
+    sipRate?: number;
+    /**
+     * @remarks
+     * The SIP activation threshold (Mbit/s).
+     *
+     * @example
+     * 100
+     */
+    sipStartMbps?: number;
+    /**
+     * @remarks
+     * The SIP activation threshold (PPS).
+     *
+     * @example
+     * 500
+     */
+    sipStartPps?: number;
+    static names(): {
+        [key: string]: string;
+    };
+    static types(): {
+        [key: string]: any;
+    };
+    validate(): void;
+    constructor(map?: {
+        [key: string]: any;
+    });
+}
 export declare class ListPolicyResponseBodyPolicyListContentSourceBlockList extends $dara.Model {
     /**
      * @remarks
-     * The validity period of the blacklist to which the source IP address is added. Unit: seconds.
+     * The duration for which the source IP address is added to the blacklist. Unit: seconds.
      *
      * @example
      * 120
@@ -346,7 +435,7 @@ export declare class ListPolicyResponseBodyPolicyListContentSourceBlockList exte
     blockExpireSeconds?: number;
     /**
      * @remarks
-     * The statistical period during which the system collects data on source IP addresses to determine whether to add the source IP addresses to the blacklist. Unit: seconds.
+     * The statistical period for source rate limiting blacklisting. Unit: seconds.
      *
      * @example
      * 60
@@ -354,7 +443,7 @@ export declare class ListPolicyResponseBodyPolicyListContentSourceBlockList exte
     everySeconds?: number;
     /**
      * @remarks
-     * The number of times that the source IP address exceeds a limit in a statistical period.
+     * The number of times the source IP address exceeds the rate limit within one statistical period.
      *
      * @example
      * 5
@@ -362,12 +451,7 @@ export declare class ListPolicyResponseBodyPolicyListContentSourceBlockList exte
     exceedLimitTimes?: number;
     /**
      * @remarks
-     * The type of the source rate limit. Valid values:
-     *
-     * *   **3**: the PPS limit on source IP addresses.
-     * *   **4**: the bandwidth limit on source IP addresses.
-     * *   **5**: the PPS limit on source SYN packets.
-     * *   **6**: the bandwidth limit on source SYN packets.
+     * The source rate limiting type. Valid values:
      *
      * @example
      * 3
@@ -387,7 +471,7 @@ export declare class ListPolicyResponseBodyPolicyListContentSourceBlockList exte
 export declare class ListPolicyResponseBodyPolicyListContentSourceLimit extends $dara.Model {
     /**
      * @remarks
-     * The bandwidth limit on source IP addresses. Unit: bytes per second.
+     * The source bandwidth throttling value, in bytes per second.
      *
      * @example
      * 2048
@@ -395,7 +479,7 @@ export declare class ListPolicyResponseBodyPolicyListContentSourceLimit extends
     bps?: number;
     /**
      * @remarks
-     * The packets per second (PPS) limit on source IP addresses.
+     * The source PPS rate limit, in packets per second.
      *
      * @example
      * 64
@@ -403,7 +487,7 @@ export declare class ListPolicyResponseBodyPolicyListContentSourceLimit extends
     pps?: number;
     /**
      * @remarks
-     * The bandwidth limit on source SYN packets. Unit: bytes per second.
+     * The source SYN bandwidth throttling value, in bytes per second.
      *
      * @example
      * 2048
@@ -411,7 +495,7 @@ export declare class ListPolicyResponseBodyPolicyListContentSourceLimit extends
     synBps?: number;
     /**
      * @remarks
-     * The PPS limit on source SYN packets.
+     * The source SYN PPS rate limit, in packets per second.
      *
      * @example
      * 64
@@ -431,7 +515,7 @@ export declare class ListPolicyResponseBodyPolicyListContentSourceLimit extends
 export declare class ListPolicyResponseBodyPolicyListContent extends $dara.Model {
     /**
      * @remarks
-     * The validity period of the IP address blacklist. The value is a UNIX timestamp.
+     * The expiration time of the IP blacklist (UNIX timestamp).
      *
      * @example
      * 1716878000
@@ -439,7 +523,7 @@ export declare class ListPolicyResponseBodyPolicyListContent extends $dara.Model
     blackIpListExpireAt?: number;
     /**
      * @remarks
-     * Indicates whether ICMP blocking is enabled.
+     * Indicates whether ICMP Blocking is enabled.
      *
      * @example
      * false
@@ -447,7 +531,7 @@ export declare class ListPolicyResponseBodyPolicyListContent extends $dara.Model
     enableDropIcmp?: boolean;
     /**
      * @remarks
-     * Indicates whether intelligent protection is enabled.
+     * Indicates whether AI-based intelligent analysis is enabled.
      *
      * @example
      * true
@@ -455,7 +539,7 @@ export declare class ListPolicyResponseBodyPolicyListContent extends $dara.Model
     enableIntelligence?: boolean;
     /**
      * @remarks
-     * Indicates whether port-specific mitigation is enabled.
+     * Indicates whether port protection is enabled.
      *
      * @example
      * true
@@ -463,16 +547,12 @@ export declare class ListPolicyResponseBodyPolicyListContent extends $dara.Model
     enableL4Defense?: boolean;
     /**
      * @remarks
-     * The byte-match filter rules.
+     * The list of byte-match filter rules.
      */
     fingerPrintRuleList?: ListPolicyResponseBodyPolicyListContentFingerPrintRuleList[];
     /**
      * @remarks
-     * The level of intelligent protection. Valid values:
-     *
-     * *   **default**: normal.
-     * *   **hard**: strict.
-     * *   **weak**: loose.
+     * The protection level of AI-based intelligent analysis. Valid values:
      *
      * @example
      * default
@@ -480,43 +560,55 @@ export declare class ListPolicyResponseBodyPolicyListContent extends $dara.Model
     intelligenceLevel?: string;
     /**
      * @remarks
-     * The port-specific mitigation rules.
+     * The list of port protection rules.
      */
     l4RuleList?: ListPolicyResponseBodyPolicyListContentL4RuleList[];
     /**
      * @remarks
-     * The port blocking rules.
+     * The list of port blocking rules.
      */
     portRuleList?: ListPolicyResponseBodyPolicyListContentPortRuleList[];
+    /**
+     * @remarks
+     * The version of the port-specific mitigation policies. Valid values:
+     *
+     * @example
+     * 2
+     */
     portVersion?: string;
     /**
      * @remarks
-     * The ports whose traffic is filtered out by the filtering policies for UDP reflection attacks.
+     * The list of ports filtered by the reflection attack prevention feature.
      */
     reflectBlockUdpPortList?: number[];
     /**
      * @remarks
-     * The countries in the location blacklist.
+     * The list of countries for the location blacklist.
      */
     regionBlockCountryList?: number[];
     /**
      * @remarks
-     * The provinces in the location blacklist.
+     * The list of provinces for the location blacklist.
      */
     regionBlockProvinceList?: number[];
     /**
      * @remarks
-     * The source IP addresses that are added to the blacklist.
+     * The SIP protection configuration.
+     */
+    sipDefense?: ListPolicyResponseBodyPolicyListContentSipDefense;
+    /**
+     * @remarks
+     * The source rate limiting blacklist.
      */
     sourceBlockList?: ListPolicyResponseBodyPolicyListContentSourceBlockList[];
     /**
      * @remarks
-     * The settings for source rate limiting.
+     * The source rate limiting configuration.
      */
     sourceLimit?: ListPolicyResponseBodyPolicyListContentSourceLimit;
     /**
      * @remarks
-     * Indicates whether back-to-origin CIDR blocks of Anti-DDoS Proxy are added to the whitelist.
+     * Indicates whether whitelisting of back-to-origin CIDR blocks of Anti-DDoS Pro and Anti-DDoS Premium (the Chinese mainland & outside the Chinese mainland) is enabled.
      *
      * @example
      * false
@@ -536,7 +628,7 @@ export declare class ListPolicyResponseBodyPolicyListContent extends $dara.Model
 export declare class ListPolicyResponseBodyPolicyList extends $dara.Model {
     /**
      * @remarks
-     * The number of protected objects that are added to the policy.
+     * The number of protected objects associated with the policy.
      *
      * @example
      * 0
@@ -544,12 +636,12 @@ export declare class ListPolicyResponseBodyPolicyList extends $dara.Model {
     attachedCount?: number;
     /**
      * @remarks
-     * The content of the policy.
+     * The policy content.
      */
     content?: ListPolicyResponseBodyPolicyListContent;
     /**
      * @remarks
-     * The ID of the policy.
+     * The policy ID.
      *
      * @example
      * 877afbdf-3982-4d36-9886-f043********
@@ -557,7 +649,7 @@ export declare class ListPolicyResponseBodyPolicyList extends $dara.Model {
     id?: string;
     /**
      * @remarks
-     * The name of the policy.
+     * The policy name.
      *
      * @example
      * test**
@@ -565,7 +657,7 @@ export declare class ListPolicyResponseBodyPolicyList extends $dara.Model {
     name?: string;
     /**
      * @remarks
-     * The remarks of the policy.
+     * The policy remarks.
      *
      * @example
      * test
@@ -573,11 +665,7 @@ export declare class ListPolicyResponseBodyPolicyList extends $dara.Model {
     remark?: string;
     /**
      * @remarks
-     * The type of the policy. Valid values:
-     *
-     * *   **default**: the default mitigation policy.
-     * *   **l3**: IP-specific mitigation policies.
-     * *   **l4**: port-specific mitigation policies.
+     * The policy type. Valid values:
      *
      * @example
      * l3
@@ -597,12 +685,12 @@ export declare class ListPolicyResponseBodyPolicyList extends $dara.Model {
 export declare class ListPolicyResponseBody extends $dara.Model {
     /**
      * @remarks
-     * The policies.
+     * The list of policies.
      */
     policyList?: ListPolicyResponseBodyPolicyList[];
     /**
      * @remarks
-     * The request ID.
+     * The ID of this request, which is a unique identifier generated by Alibaba Cloud for the request. It can be used to troubleshoot and locate issues.
      *
      * @example
      * B4B379C2-9319-4C6B-B579-FE36831B09F4