@alicloud/dataworks-public20240518 9.10.1 → 9.10.2

package/dist/client.d.ts

@@ -490,7 +490,7 @@ export default class Client extends OpenApi {
      *
      * @remarks
      * >Notice: This operation does not support batch operations. If you specify multiple publish entities in the parameters, all entities except the first one are ignored.
-     * This operation is part of the new data development capabilities and applies only to workspaces that use the new data development feature. If the new data development feature is not used, use the corresponding operation of the 2020-05-18 version.
+     * This operation is part of the new Data Studio capabilities and applies only to workspaces that use the new Data Studio feature. If the new Data Studio feature is not used, use the corresponding operation of the 2020-05-18 version.
      *
      * @param request - CreateComponentRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -502,7 +502,7 @@ export default class Client extends OpenApi {
      *
      * @remarks
      * >Notice: This operation does not support batch operations. If you specify multiple publish entities in the parameters, all entities except the first one are ignored.
-     * This operation is part of the new data development capabilities and applies only to workspaces that use the new data development feature. If the new data development feature is not used, use the corresponding operation of the 2020-05-18 version.
+     * This operation is part of the new Data Studio capabilities and applies only to workspaces that use the new Data Studio feature. If the new Data Studio feature is not used, use the corresponding operation of the 2020-05-18 version.
      *
      * @param request - CreateComponentRequest
      * @returns CreateComponentResponse
@@ -1514,11 +1514,11 @@ export default class Client extends OpenApi {
      */
     createUdfFile(request: $_model.CreateUdfFileRequest): Promise<$_model.CreateUdfFileResponse>;
     /**
-     * Creates a workflow in a specified directory in DataStudio.
+     * Creates a workflow in a specified directory in Data Studio.
      *
      * @remarks
      * >Notice: This operation does not support batch operations. If more than one workflow is defined in the FlowSpec, all workflows except the first one are ignored. In addition, nodes defined within the workflow are also directly ignored. Call the CreateNode operation to create internal nodes one by one.</notice>
-     * This operation is part of the new DataStudio capabilities and applies only to workspaces that use the new DataStudio. If you do not use the new DataStudio, use the corresponding operation of the 2020-05-18 version.
+     * This operation is part of the new Data Studio capabilities and applies only to workspaces that use the new Data Studio. If you do not use the new Data Studio, use the corresponding operation of the 2020-05-18 version.
      *
      * @param request - CreateWorkflowDefinitionRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -1526,11 +1526,11 @@ export default class Client extends OpenApi {
      */
     createWorkflowDefinitionWithOptions(request: $_model.CreateWorkflowDefinitionRequest, runtime: $dara.RuntimeOptions): Promise<$_model.CreateWorkflowDefinitionResponse>;
     /**
-     * Creates a workflow in a specified directory in DataStudio.
+     * Creates a workflow in a specified directory in Data Studio.
      *
      * @remarks
      * >Notice: This operation does not support batch operations. If more than one workflow is defined in the FlowSpec, all workflows except the first one are ignored. In addition, nodes defined within the workflow are also directly ignored. Call the CreateNode operation to create internal nodes one by one.</notice>
-     * This operation is part of the new DataStudio capabilities and applies only to workspaces that use the new DataStudio. If you do not use the new DataStudio, use the corresponding operation of the 2020-05-18 version.
+     * This operation is part of the new Data Studio capabilities and applies only to workspaces that use the new Data Studio. If you do not use the new Data Studio, use the corresponding operation of the 2020-05-18 version.
      *
      * @param request - CreateWorkflowDefinitionRequest
      * @returns CreateWorkflowDefinitionResponse
@@ -1540,7 +1540,7 @@ export default class Client extends OpenApi {
      * Creates a workflow instance based on configurations, such as a data backfill workflow instance.
      *
      * @remarks
-     * You must purchase DataWorks Basic Edition or a later edition to use this feature.
+     * You must purchase DataWorks Basic Edition or a higher edition to use this feature.
      *
      * @param tmpReq - CreateWorkflowInstancesRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -1551,7 +1551,7 @@ export default class Client extends OpenApi {
      * Creates a workflow instance based on configurations, such as a data backfill workflow instance.
      *
      * @remarks
-     * You must purchase DataWorks Basic Edition or a later edition to use this feature.
+     * You must purchase DataWorks Basic Edition or a higher edition to use this feature.
      *
      * @param request - CreateWorkflowInstancesRequest
      * @returns CreateWorkflowInstancesResponse
@@ -1660,8 +1660,8 @@ export default class Client extends OpenApi {
      * Deletes a component.
      *
      * @remarks
-     * <notice>After a UDF function is published, it cannot be deleted. You must take it offline before deleting it.</notice>
-     * This API operation belongs to the new data development capabilities and applies only to workspaces that use the new data development feature. If you do not use the new data development feature, use the corresponding API operation of the 2020-05-18 version.
+     * <notice>After a UDF function is deployed, it cannot be deleted. You must undeploy it before deleting it.</notice>
+     * This API operation belongs to the new Data Studio capabilities and applies only to workspaces that use the new Data Studio feature. If you do not use the new Data Studio feature, use the corresponding API operation of the 2020-05-18 version.
      *
      * @param request - DeleteComponentRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -1672,8 +1672,8 @@ export default class Client extends OpenApi {
      * Deletes a component.
      *
      * @remarks
-     * <notice>After a UDF function is published, it cannot be deleted. You must take it offline before deleting it.</notice>
-     * This API operation belongs to the new data development capabilities and applies only to workspaces that use the new data development feature. If you do not use the new data development feature, use the corresponding API operation of the 2020-05-18 version.
+     * <notice>After a UDF function is deployed, it cannot be deleted. You must undeploy it before deleting it.</notice>
+     * This API operation belongs to the new Data Studio capabilities and applies only to workspaces that use the new Data Studio feature. If you do not use the new Data Studio feature, use the corresponding API operation of the 2020-05-18 version.
      *
      * @param request - DeleteComponentRequest
      * @returns DeleteComponentResponse
@@ -3129,10 +3129,10 @@ export default class Client extends OpenApi {
      */
     getCertificate(request: $_model.GetCertificateRequest): Promise<$_model.GetCertificateResponse>;
     /**
-     * Retrieves the details of a specified column in a Data Map table.
+     * Retrieves the details of a specified column in a DataWorks Data Map table.
      *
      * @remarks
-     * 1. You must purchase DataWorks Basic Edition or a higher edition to use this feature.
+     * 1. You must purchase DataWorks Basic Edition or a later edition to use this operation.
      *
      * @param request - GetColumnRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -3140,10 +3140,10 @@ export default class Client extends OpenApi {
      */
     getColumnWithOptions(request: $_model.GetColumnRequest, runtime: $dara.RuntimeOptions): Promise<$_model.GetColumnResponse>;
     /**
-     * Retrieves the details of a specified column in a Data Map table.
+     * Retrieves the details of a specified column in a DataWorks Data Map table.
      *
      * @remarks
-     * 1. You must purchase DataWorks Basic Edition or a higher edition to use this feature.
+     * 1. You must purchase DataWorks Basic Edition or a later edition to use this operation.
      *
      * @param request - GetColumnRequest
      * @returns GetColumnResponse
@@ -4862,10 +4862,10 @@ export default class Client extends OpenApi {
      */
     listCertificates(request: $_model.ListCertificatesRequest): Promise<$_model.ListCertificatesResponse>;
     /**
-     * Queries the column list of a specified table in DataWorks Data Map.
+     * Queries the columns of a specified table in DataWorks Data Map.
      *
      * @remarks
-     * 1. You must purchase DataWorks Basic Edition or a higher edition to use this feature.
+     * 1. You must purchase DataWorks Basic Edition or later to use this API.
      *
      * @param request - ListColumnsRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -4873,10 +4873,10 @@ export default class Client extends OpenApi {
      */
     listColumnsWithOptions(request: $_model.ListColumnsRequest, runtime: $dara.RuntimeOptions): Promise<$_model.ListColumnsResponse>;
     /**
-     * Queries the column list of a specified table in DataWorks Data Map.
+     * Queries the columns of a specified table in DataWorks Data Map.
      *
      * @remarks
-     * 1. You must purchase DataWorks Basic Edition or a higher edition to use this feature.
+     * 1. You must purchase DataWorks Basic Edition or later to use this API.
      *
      * @param request - ListColumnsRequest
      * @returns ListColumnsResponse
@@ -5848,11 +5848,11 @@ export default class Client extends OpenApi {
      */
     listLineageRelationships(request: $_model.ListLineageRelationshipsRequest): Promise<$_model.ListLineageRelationshipsResponse>;
     /**
-     * Queries the list of upstream and downstream lineage entities for a given entity in DataWorks Data Map, with an option to include specific lineage relationship information.
+     * Queries the upstream and downstream lineage entities of a given entity in DataWorks Data Map. You can specify whether to include detailed lineage relationship information.
      *
      * @remarks
-     * 1. You must purchase DataWorks Standard Edition or later to use this operation.
-     * 2. This operation queries the upstream and downstream entities of the current entity and the lineage relationships between entities.
+     * 1. You must purchase DataWorks Standard Edition or a more advanced edition to use this operation.
+     * 2. This operation queries the upstream and downstream entities of the current entity and the lineage relationships between the entities.
      *
      * @param request - ListLineagesRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -5860,11 +5860,11 @@ export default class Client extends OpenApi {
      */
     listLineagesWithOptions(request: $_model.ListLineagesRequest, runtime: $dara.RuntimeOptions): Promise<$_model.ListLineagesResponse>;
     /**
-     * Queries the list of upstream and downstream lineage entities for a given entity in DataWorks Data Map, with an option to include specific lineage relationship information.
+     * Queries the upstream and downstream lineage entities of a given entity in DataWorks Data Map. You can specify whether to include detailed lineage relationship information.
      *
      * @remarks
-     * 1. You must purchase DataWorks Standard Edition or later to use this operation.
-     * 2. This operation queries the upstream and downstream entities of the current entity and the lineage relationships between entities.
+     * 1. You must purchase DataWorks Standard Edition or a more advanced edition to use this operation.
+     * 2. This operation queries the upstream and downstream entities of the current entity and the lineage relationships between the entities.
      *
      * @param request - ListLineagesRequest
      * @returns ListLineagesResponse
@@ -6283,7 +6283,7 @@ export default class Client extends OpenApi {
      * Queries the details of workspace roles by paging.
      *
      * @remarks
-     * You must purchase DataWorks Basic Edition or later to use this operation.
+     * You must purchase DataWorks Basic Edition or a higher edition to use this operation.
      *
      * @param tmpReq - ListProjectRolesRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -6294,7 +6294,7 @@ export default class Client extends OpenApi {
      * Queries the details of workspace roles by paging.
      *
      * @remarks
-     * You must purchase DataWorks Basic Edition or later to use this operation.
+     * You must purchase DataWorks Basic Edition or a higher edition to use this operation.
      *
      * @param request - ListProjectRolesRequest
      * @returns ListProjectRolesResponse
@@ -6663,7 +6663,7 @@ export default class Client extends OpenApi {
      * Queries the tables in Data Map. For types that do not support the schema level, this operation queries the tables in a specified database. For types that support the schema level, this operation queries the tables in a specified database, MaxCompute project, or schema. The response contains only basic table information and does not include technical or business metadata. For non-MaxCompute types, the response is not real-time and may be delayed by up to 1 hour compared to the metadata collection results.
      *
      * @remarks
-     * 1. You must purchase DataWorks Basic Edition or later to use this API.
+     * 1. You must purchase DataWorks Basic Edition or a higher edition to use this API.
      *
      * @param tmpReq - ListTablesRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -6674,7 +6674,7 @@ export default class Client extends OpenApi {
      * Queries the tables in Data Map. For types that do not support the schema level, this operation queries the tables in a specified database. For types that support the schema level, this operation queries the tables in a specified database, MaxCompute project, or schema. The response contains only basic table information and does not include technical or business metadata. For non-MaxCompute types, the response is not real-time and may be delayed by up to 1 hour compared to the metadata collection results.
      *
      * @remarks
-     * 1. You must purchase DataWorks Basic Edition or later to use this API.
+     * 1. You must purchase DataWorks Basic Edition or a higher edition to use this API.
      *
      * @param request - ListTablesRequest
      * @returns ListTablesResponse
@@ -6945,10 +6945,10 @@ export default class Client extends OpenApi {
      */
     moveNode(request: $_model.MoveNodeRequest): Promise<$_model.MoveNodeResponse>;
     /**
-     * Moves a specified data development file resource to a specified data development folder.
+     * Moves a specified Data Studio file resource to a specified Data Studio folder.
      *
      * @remarks
-     * This operation is part of the new data development capabilities and applies only to workspaces that use the new data development feature. If you do not use the new data development feature, use the corresponding operation in the 2020-05-18 version.
+     * This operation is part of the new Data Studio capabilities and applies only to workspaces that use the new Data Studio feature. If you do not use the new Data Studio feature, use the corresponding operation in the 2020-05-18 version.
      *
      * @param request - MoveResourceRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -6956,10 +6956,10 @@ export default class Client extends OpenApi {
      */
     moveResourceWithOptions(request: $_model.MoveResourceRequest, runtime: $dara.RuntimeOptions): Promise<$_model.MoveResourceResponse>;
     /**
-     * Moves a specified data development file resource to a specified data development folder.
+     * Moves a specified Data Studio file resource to a specified Data Studio folder.
      *
      * @remarks
-     * This operation is part of the new data development capabilities and applies only to workspaces that use the new data development feature. If you do not use the new data development feature, use the corresponding operation in the 2020-05-18 version.
+     * This operation is part of the new Data Studio capabilities and applies only to workspaces that use the new Data Studio feature. If you do not use the new Data Studio feature, use the corresponding operation in the 2020-05-18 version.
      *
      * @param request - MoveResourceRequest
      * @returns MoveResourceResponse

package/dist/client.js

@@ -1411,7 +1411,7 @@ class Client extends openapi_core_1.default {
      *
      * @remarks
      * >Notice: This operation does not support batch operations. If you specify multiple publish entities in the parameters, all entities except the first one are ignored.
-     * This operation is part of the new data development capabilities and applies only to workspaces that use the new data development feature. If the new data development feature is not used, use the corresponding operation of the 2020-05-18 version.
+     * This operation is part of the new Data Studio capabilities and applies only to workspaces that use the new Data Studio feature. If the new Data Studio feature is not used, use the corresponding operation of the 2020-05-18 version.
      *
      * @param request - CreateComponentRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -1450,7 +1450,7 @@ class Client extends openapi_core_1.default {
      *
      * @remarks
      * >Notice: This operation does not support batch operations. If you specify multiple publish entities in the parameters, all entities except the first one are ignored.
-     * This operation is part of the new data development capabilities and applies only to workspaces that use the new data development feature. If the new data development feature is not used, use the corresponding operation of the 2020-05-18 version.
+     * This operation is part of the new Data Studio capabilities and applies only to workspaces that use the new Data Studio feature. If the new Data Studio feature is not used, use the corresponding operation of the 2020-05-18 version.
      *
      * @param request - CreateComponentRequest
      * @returns CreateComponentResponse
@@ -4789,11 +4789,11 @@ class Client extends openapi_core_1.default {
         return await this.createUdfFileWithOptions(request, runtime);
     }
     /**
-     * Creates a workflow in a specified directory in DataStudio.
+     * Creates a workflow in a specified directory in Data Studio.
      *
      * @remarks
      * >Notice: This operation does not support batch operations. If more than one workflow is defined in the FlowSpec, all workflows except the first one are ignored. In addition, nodes defined within the workflow are also directly ignored. Call the CreateNode operation to create internal nodes one by one.</notice>
-     * This operation is part of the new DataStudio capabilities and applies only to workspaces that use the new DataStudio. If you do not use the new DataStudio, use the corresponding operation of the 2020-05-18 version.
+     * This operation is part of the new Data Studio capabilities and applies only to workspaces that use the new Data Studio. If you do not use the new Data Studio, use the corresponding operation of the 2020-05-18 version.
      *
      * @param request - CreateWorkflowDefinitionRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -4825,11 +4825,11 @@ class Client extends openapi_core_1.default {
         return $dara.cast(await this.callApi(params, req, runtime), new $_model.CreateWorkflowDefinitionResponse({}));
     }
     /**
-     * Creates a workflow in a specified directory in DataStudio.
+     * Creates a workflow in a specified directory in Data Studio.
      *
      * @remarks
      * >Notice: This operation does not support batch operations. If more than one workflow is defined in the FlowSpec, all workflows except the first one are ignored. In addition, nodes defined within the workflow are also directly ignored. Call the CreateNode operation to create internal nodes one by one.</notice>
-     * This operation is part of the new DataStudio capabilities and applies only to workspaces that use the new DataStudio. If you do not use the new DataStudio, use the corresponding operation of the 2020-05-18 version.
+     * This operation is part of the new Data Studio capabilities and applies only to workspaces that use the new Data Studio. If you do not use the new Data Studio, use the corresponding operation of the 2020-05-18 version.
      *
      * @param request - CreateWorkflowDefinitionRequest
      * @returns CreateWorkflowDefinitionResponse
@@ -4842,7 +4842,7 @@ class Client extends openapi_core_1.default {
      * Creates a workflow instance based on configurations, such as a data backfill workflow instance.
      *
      * @remarks
-     * You must purchase DataWorks Basic Edition or a later edition to use this feature.
+     * You must purchase DataWorks Basic Edition or a higher edition to use this feature.
      *
      * @param tmpReq - CreateWorkflowInstancesRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -4921,7 +4921,7 @@ class Client extends openapi_core_1.default {
      * Creates a workflow instance based on configurations, such as a data backfill workflow instance.
      *
      * @remarks
-     * You must purchase DataWorks Basic Edition or a later edition to use this feature.
+     * You must purchase DataWorks Basic Edition or a higher edition to use this feature.
      *
      * @param request - CreateWorkflowInstancesRequest
      * @returns CreateWorkflowInstancesResponse
@@ -5162,8 +5162,8 @@ class Client extends openapi_core_1.default {
      * Deletes a component.
      *
      * @remarks
-     * <notice>After a UDF function is published, it cannot be deleted. You must take it offline before deleting it.</notice>
-     * This API operation belongs to the new data development capabilities and applies only to workspaces that use the new data development feature. If you do not use the new data development feature, use the corresponding API operation of the 2020-05-18 version.
+     * <notice>After a UDF function is deployed, it cannot be deleted. You must undeploy it before deleting it.</notice>
+     * This API operation belongs to the new Data Studio capabilities and applies only to workspaces that use the new Data Studio feature. If you do not use the new Data Studio feature, use the corresponding API operation of the 2020-05-18 version.
      *
      * @param request - DeleteComponentRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -5198,8 +5198,8 @@ class Client extends openapi_core_1.default {
      * Deletes a component.
      *
      * @remarks
-     * <notice>After a UDF function is published, it cannot be deleted. You must take it offline before deleting it.</notice>
-     * This API operation belongs to the new data development capabilities and applies only to workspaces that use the new data development feature. If you do not use the new data development feature, use the corresponding API operation of the 2020-05-18 version.
+     * <notice>After a UDF function is deployed, it cannot be deleted. You must undeploy it before deleting it.</notice>
+     * This API operation belongs to the new Data Studio capabilities and applies only to workspaces that use the new Data Studio feature. If you do not use the new Data Studio feature, use the corresponding API operation of the 2020-05-18 version.
      *
      * @param request - DeleteComponentRequest
      * @returns DeleteComponentResponse
@@ -8385,10 +8385,10 @@ class Client extends openapi_core_1.default {
         return await this.getCertificateWithOptions(request, runtime);
     }
     /**
-     * Retrieves the details of a specified column in a Data Map table.
+     * Retrieves the details of a specified column in a DataWorks Data Map table.
      *
      * @remarks
-     * 1. You must purchase DataWorks Basic Edition or a higher edition to use this feature.
+     * 1. You must purchase DataWorks Basic Edition or a later edition to use this operation.
      *
      * @param request - GetColumnRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -8414,10 +8414,10 @@ class Client extends openapi_core_1.default {
         return $dara.cast(await this.callApi(params, req, runtime), new $_model.GetColumnResponse({}));
     }
     /**
-     * Retrieves the details of a specified column in a Data Map table.
+     * Retrieves the details of a specified column in a DataWorks Data Map table.
      *
      * @remarks
-     * 1. You must purchase DataWorks Basic Edition or a higher edition to use this feature.
+     * 1. You must purchase DataWorks Basic Edition or a later edition to use this operation.
      *
      * @param request - GetColumnRequest
      * @returns GetColumnResponse
@@ -12218,10 +12218,10 @@ class Client extends openapi_core_1.default {
         return await this.listCertificatesWithOptions(request, runtime);
     }
     /**
-     * Queries the column list of a specified table in DataWorks Data Map.
+     * Queries the columns of a specified table in DataWorks Data Map.
      *
      * @remarks
-     * 1. You must purchase DataWorks Basic Edition or a higher edition to use this feature.
+     * 1. You must purchase DataWorks Basic Edition or later to use this API.
      *
      * @param request - ListColumnsRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -12247,10 +12247,10 @@ class Client extends openapi_core_1.default {
         return $dara.cast(await this.callApi(params, req, runtime), new $_model.ListColumnsResponse({}));
     }
     /**
-     * Queries the column list of a specified table in DataWorks Data Map.
+     * Queries the columns of a specified table in DataWorks Data Map.
      *
      * @remarks
-     * 1. You must purchase DataWorks Basic Edition or a higher edition to use this feature.
+     * 1. You must purchase DataWorks Basic Edition or later to use this API.
      *
      * @param request - ListColumnsRequest
      * @returns ListColumnsResponse
@@ -14790,11 +14790,11 @@ class Client extends openapi_core_1.default {
         return await this.listLineageRelationshipsWithOptions(request, runtime);
     }
     /**
-     * Queries the list of upstream and downstream lineage entities for a given entity in DataWorks Data Map, with an option to include specific lineage relationship information.
+     * Queries the upstream and downstream lineage entities of a given entity in DataWorks Data Map. You can specify whether to include detailed lineage relationship information.
      *
      * @remarks
-     * 1. You must purchase DataWorks Standard Edition or later to use this operation.
-     * 2. This operation queries the upstream and downstream entities of the current entity and the lineage relationships between entities.
+     * 1. You must purchase DataWorks Standard Edition or a more advanced edition to use this operation.
+     * 2. This operation queries the upstream and downstream entities of the current entity and the lineage relationships between the entities.
      *
      * @param request - ListLineagesRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -14820,11 +14820,11 @@ class Client extends openapi_core_1.default {
         return $dara.cast(await this.callApi(params, req, runtime), new $_model.ListLineagesResponse({}));
     }
     /**
-     * Queries the list of upstream and downstream lineage entities for a given entity in DataWorks Data Map, with an option to include specific lineage relationship information.
+     * Queries the upstream and downstream lineage entities of a given entity in DataWorks Data Map. You can specify whether to include detailed lineage relationship information.
      *
      * @remarks
-     * 1. You must purchase DataWorks Standard Edition or later to use this operation.
-     * 2. This operation queries the upstream and downstream entities of the current entity and the lineage relationships between entities.
+     * 1. You must purchase DataWorks Standard Edition or a more advanced edition to use this operation.
+     * 2. This operation queries the upstream and downstream entities of the current entity and the lineage relationships between the entities.
      *
      * @param request - ListLineagesRequest
      * @returns ListLineagesResponse
@@ -15874,7 +15874,7 @@ class Client extends openapi_core_1.default {
      * Queries the details of workspace roles by paging.
      *
      * @remarks
-     * You must purchase DataWorks Basic Edition or later to use this operation.
+     * You must purchase DataWorks Basic Edition or a higher edition to use this operation.
      *
      * @param tmpReq - ListProjectRolesRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -15929,7 +15929,7 @@ class Client extends openapi_core_1.default {
      * Queries the details of workspace roles by paging.
      *
      * @remarks
-     * You must purchase DataWorks Basic Edition or later to use this operation.
+     * You must purchase DataWorks Basic Edition or a higher edition to use this operation.
      *
      * @param request - ListProjectRolesRequest
      * @returns ListProjectRolesResponse
@@ -16815,7 +16815,7 @@ class Client extends openapi_core_1.default {
      * Queries the tables in Data Map. For types that do not support the schema level, this operation queries the tables in a specified database. For types that support the schema level, this operation queries the tables in a specified database, MaxCompute project, or schema. The response contains only basic table information and does not include technical or business metadata. For non-MaxCompute types, the response is not real-time and may be delayed by up to 1 hour compared to the metadata collection results.
      *
      * @remarks
-     * 1. You must purchase DataWorks Basic Edition or later to use this API.
+     * 1. You must purchase DataWorks Basic Edition or a higher edition to use this API.
      *
      * @param tmpReq - ListTablesRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -16849,7 +16849,7 @@ class Client extends openapi_core_1.default {
      * Queries the tables in Data Map. For types that do not support the schema level, this operation queries the tables in a specified database. For types that support the schema level, this operation queries the tables in a specified database, MaxCompute project, or schema. The response contains only basic table information and does not include technical or business metadata. For non-MaxCompute types, the response is not real-time and may be delayed by up to 1 hour compared to the metadata collection results.
      *
      * @remarks
-     * 1. You must purchase DataWorks Basic Edition or later to use this API.
+     * 1. You must purchase DataWorks Basic Edition or a higher edition to use this API.
      *
      * @param request - ListTablesRequest
      * @returns ListTablesResponse
@@ -17672,10 +17672,10 @@ class Client extends openapi_core_1.default {
         return await this.moveNodeWithOptions(request, runtime);
     }
     /**
-     * Moves a specified data development file resource to a specified data development folder.
+     * Moves a specified Data Studio file resource to a specified Data Studio folder.
      *
      * @remarks
-     * This operation is part of the new data development capabilities and applies only to workspaces that use the new data development feature. If you do not use the new data development feature, use the corresponding operation in the 2020-05-18 version.
+     * This operation is part of the new Data Studio capabilities and applies only to workspaces that use the new Data Studio feature. If you do not use the new Data Studio feature, use the corresponding operation in the 2020-05-18 version.
      *
      * @param request - MoveResourceRequest
      * @param runtime - runtime options for this request RuntimeOptions
@@ -17710,10 +17710,10 @@ class Client extends openapi_core_1.default {
         return $dara.cast(await this.callApi(params, req, runtime), new $_model.MoveResourceResponse({}));
     }
     /**
-     * Moves a specified data development file resource to a specified data development folder.
+     * Moves a specified Data Studio file resource to a specified Data Studio folder.
      *
      * @remarks
-     * This operation is part of the new data development capabilities and applies only to workspaces that use the new data development feature. If you do not use the new data development feature, use the corresponding operation in the 2020-05-18 version.
+     * This operation is part of the new Data Studio capabilities and applies only to workspaces that use the new Data Studio feature. If you do not use the new Data Studio feature, use the corresponding operation in the 2020-05-18 version.
      *
      * @param request - MoveResourceRequest
      * @returns MoveResourceResponse

package/dist/models/Column.d.ts

@@ -4,17 +4,17 @@ import * as $dara from '@darabonba/typescript';
 export declare class ColumnBusinessMetadata extends $dara.Model {
     /**
      * @remarks
-     * The custom attribute values, where key is the custom attribute identifier and value is the attribute value list.
+     * The custom attribute values, where the key is the custom attribute identifier and the value is a list of attribute values.
      */
     customAttributes?: {
         [key: string]: string[];
     };
     /**
      * @remarks
-     * The business description of the field. Currently, only MaxCompute, HMS (EMR cluster), and DLF types are supported.
+     * The business description of the column. Currently, only MaxCompute, HMS (EMR cluster), and DLF types are supported.
      *
      * @example
-     * Business description of column 1
+     * Business description of Column 1
      */
     description?: string;
     static names(): {
@@ -28,6 +28,25 @@ export declare class ColumnBusinessMetadata extends $dara.Model {
         [key: string]: any;
     });
 }
+export declare class ColumnTechnicalMetadata extends $dara.Model {
+    /**
+     * @remarks
+     * The technical parameters of the column, where the key is the parameter name and the value is a string. Objects or arrays are represented as JSON strings.
+     */
+    parameters?: {
+        [key: string]: string;
+    };
+    static names(): {
+        [key: string]: string;
+    };
+    static types(): {
+        [key: string]: any;
+    };
+    validate(): void;
+    constructor(map?: {
+        [key: string]: any;
+    });
+}
 export declare class Column extends $dara.Model {
     /**
      * @remarks
@@ -44,7 +63,7 @@ export declare class Column extends $dara.Model {
     comment?: string;
     /**
      * @remarks
-     * Indicates whether the column is a foreign key. Currently, only MaxCompute is supported.
+     * Specifies whether the column is a foreign key. Currently, only the MaxCompute type is supported.
      *
      * @example
      * false
@@ -54,71 +73,33 @@ export declare class Column extends $dara.Model {
      * @remarks
      * The ID. For more information, see [Metadata entity concepts](https://help.aliyun.com/document_detail/2880092.html).
      *
+     * The format is `${EntityType}:${Instance ID or URL-encoded URL}:${Catalog ID}:${Database name}:${Schema name}:${Table name}:${Column name}`. Use an empty string as a placeholder for non-existent levels.
      *
+     * > For MaxCompute and DLF types, use an empty string as a placeholder for the instance ID. For the MaxCompute type, the database name is the MaxCompute project name. Projects with the three-tier model enabled require the schema name. For projects without the three-tier model enabled, use an empty string as a placeholder for the schema name.
      *
+     * > For the StarRocks type, the catalog ID is the catalog name. For the DLF type, the catalog ID is the catalog ID. Other types do not support the catalog level, and an empty string can be used as a placeholder.
      *
-     * The format is `${EntityType}:${instance ID or encoded URL}:${DataCatalogIdentity}:${DatabaseName}:${SchemaName}:${TableName}:${ColumnName}`. Use an empty character as a placeholder for levels that do not exist.
-     *
-     *
-     *
-     *
-     * > For MaxCompute and DLF types, use an empty string as a placeholder for the instance ID. For MaxCompute, the database name is the MaxCompute project name. Projects with the three-layer model enabled must include the schema name. For projects without the three-layer model enabled, use an empty string as a placeholder for the schema name.
-     *
-     *
-     *
-     *
-     * > For StarRocks, the data catalog identifier is the catalog name. For DLF, the data catalog identifier is the catalog ID. Other types do not support the catalog level, and you can use an empty string as a placeholder.
-     *
-     *
-     *
-     *
-     * The following examples show the ID formats for several common types:
-     *
-     *
-     *
+     * The following are the ID formats for several common types:
      *
      * `maxcompute-column:::project_name:[schema_name]:table_name:column_name`
      *
-     *
-     *
-     *
      * `dlf-column::catalog_id:database_name::table_name:column_name`
      *
-     *
-     *
-     *
      * `hms-column:instance_id::database_name::table_name:column_name`
      *
-     *
-     *
-     *
      * `holo-column:instance_id::database_name:schema_name:table_name:column_name`
      *
-     *
-     *
-     *
      * `mysql-column:(instance_id|encoded_jdbc_url)::database_name::table_name:column_name`
      *
-     *
-     *
-     *
-     * > Where
-     * >
-     * > `instance_id`: The instance ID. This is required when the data source is registered in instance mode.
-     * >
-     * > `encoded_jdbc_url`: The URL-encoded JDBC connection string. This is required when the data source is registered by using a connection string.
-     * >
-     * > `catalog_id`: The DLF catalog ID.
-     * >
-     * > `project_name`: The MaxCompute project name.
-     * >
-     * > `database_name`: The database name.
-     * >
-     * > `schema_name`: The schema name. For MaxCompute, this is required only when the three-layer model is enabled for the project. If the three-layer model is not enabled, use an empty string as a placeholder.
-     * >
-     * > `table_name`: The table name.
-     * >
-     * > `column_name`: The column name.
+     * > Where:
+     * `instance_id`: The instance ID, which is required when the data source is registered in instance mode.
+     * `encoded_jdbc_url`: The URL-encoded JDBC connection string, which is required when the data source is registered in connection string mode.
+     * `catalog_id`: The DLF catalog ID.
+     * `project_name`: The MaxCompute project name.
+     * `database_name`: The database name.
+     * `schema_name`: The schema name. For the MaxCompute type, this is required only if the three-tier model is enabled for the project. If it is not enabled, use an empty string as a placeholder.
+     * `table_name`: The table name.
+     * `column_name`: The column name.
      *
      * @example
      * maxcompute-column:::project_name:[schema_name]:table_name:column_name
@@ -134,7 +115,7 @@ export declare class Column extends $dara.Model {
     name?: string;
     /**
      * @remarks
-     * Indicates whether the column is a partition key.
+     * Specifies whether the column is a partition key.
      *
      * @example
      * false
@@ -150,7 +131,7 @@ export declare class Column extends $dara.Model {
     position?: number;
     /**
      * @remarks
-     * Indicates whether the column is a primary key. Currently, only MaxCompute is supported.
+     * Specifies whether the column is a primary key. Currently, only the MaxCompute type is supported.
      *
      * @example
      * false
@@ -161,12 +142,17 @@ export declare class Column extends $dara.Model {
     };
     /**
      * @remarks
-     * The table ID. For more information, see the `Table` object.
+     * The ID of the table. Refer to the Table object.
      *
      * @example
      * maxcompute-table:::project_name:[schema_name]:table_name
      */
     tableId?: string;
+    /**
+     * @remarks
+     * The technical metadata.
+     */
+    technicalMetadata?: ColumnTechnicalMetadata;
     /**
      * @remarks
      * The type.