@alicloud/cms20190101 4.0.8 → 4.0.10

package/src/models/DescribeLogMonitorListResponseBody.ts

@@ -15,12 +15,17 @@ export class DescribeLogMonitorListResponseBodyLogMonitorListValueFilter extends
    * @remarks
    * The method that is used to match the field value. Valid values:
    * 
-   * *   contain: contains
-   * *   notContain: does not contain
-   * *   `>`: greater than
-   * *   `<`: less than
-   * *   `>=`: greater than or equal to
-   * *   `<=`: less than or equal to
+   * - contain: contains
+   * 
+   * - notContain: does not contain
+   * 
+   * - `>`: greater than
+   * 
+   * - `<`: less than
+   * 
+   * - `>=`: greater than or equal to
+   * 
+   * - `<=`: less than or equal to
    * 
    * @example
    * contain
@@ -127,8 +132,9 @@ export class DescribeLogMonitorListResponseBodyLogMonitorList extends $dara.Mode
    * @remarks
    * The logical operator that is used between log filter conditions. The ValueFilter and ValueFilterRelation parameters are used in pair. Valid values:
    * 
-   * *   and
-   * *   or
+   * - and
+   * 
+   * - or
    * 
    * @example
    * and
@@ -179,7 +185,7 @@ export class DescribeLogMonitorListResponseBody extends $dara.Model {
    * @remarks
    * The status code.
    * 
-   * >  The status code 200 indicates that the request was successful.
+   * > The status code 200 indicates that the request was successful.
    * 
    * @example
    * 200
@@ -226,8 +232,9 @@ export class DescribeLogMonitorListResponseBody extends $dara.Model {
    * @remarks
    * Indicates whether the request was successful. Valid values:
    * 
-   * *   true
-   * *   false
+   * - true
+   * 
+   * - false
    * 
    * @example
    * true

package/src/models/DescribeMetricDataRequest.ts

@@ -9,7 +9,7 @@ export class DescribeMetricDataRequest extends $dara.Model {
    * 
    * Set the value to a collection of key-value pairs. A typical key-value pair is `instanceId:i-2ze2d6j5uhg20x47****`.
    * 
-   * >  You can query a maximum of 50 instances in a single request.
+   * > You can query a maximum of 50 instances in a single request.
    * 
    * @example
    * [{"instanceId": "i-abcdefgh12****"}]
@@ -19,20 +19,23 @@ export class DescribeMetricDataRequest extends $dara.Model {
    * @remarks
    * The end of the time range to query monitoring data.
    * 
-   * *   If the `StartTime` and `EndTime` parameters are not specified, the monitoring data of the last statistical period is queried.``
+   * - If the `StartTime` and `EndTime` parameters are not specified, the monitoring data of the last statistical period is queried.\\`\\`
    * 
-   * *   If the `StartTime` and `EndTime` parameters are specified, the monitoring data of the last statistical period in the specified time range is queried.```` The following examples demonstrate how to determine the period in which monitoring data is queried:
+   * - If the `StartTime` and `EndTime` parameters are specified, the monitoring data of the last statistical period in the specified time range is queried.\\`\\`\\`\\` The following examples demonstrate how to determine the period in which monitoring data is queried:
    * 
-   *     *   If you set the `Period` parameter to 15, the specified time range must be less than or equal to 20 minutes. For example, if you set the StartTime parameter to 2021-05-08 08:10:00 and the EndTime parameter to 2021-05-08 08:30:00, the monitoring data of the last 15 seconds in the time range is queried.
-   *     *   If you set the `Period` to 60 or 900, the specified time range must be less than or equal to 2 hours. For example, if you set the Period parameter to 60, the StartTime parameter to 2021-05-08 08:00:00, and the EndTime parameter to 2021-05-08 10:00:00, the monitoring data of the last 60 seconds in the time range is queried.
-   *     *   If you set the `Period` parameter to 3600, the specified time range must be less than or equal to 2 days. For example, if you set the StartTime parameter to 2021-05-08 08:00:00 and the EndTime parameter to 2021-05-10 08:00:00, the monitoring data of the last 3,600 seconds in the time range is queried.
+   *   - If you set the `Period` parameter to 15, the specified time range must be less than or equal to 20 minutes. For example, if you set the StartTime parameter to 2021-05-08 08:10:00 and the EndTime parameter to 2021-05-08 08:30:00, the monitoring data of the last 15 seconds in the time range is queried.
+   * 
+   *   - If you set the `Period` to 60 or 900, the specified time range must be less than or equal to 2 hours. For example, if you set the Period parameter to 60, the StartTime parameter to 2021-05-08 08:00:00, and the EndTime parameter to 2021-05-08 10:00:00, the monitoring data of the last 60 seconds in the time range is queried.
+   * 
+   *   - If you set the `Period` parameter to 3600, the specified time range must be less than or equal to 2 days. For example, if you set the StartTime parameter to 2021-05-08 08:00:00 and the EndTime parameter to 2021-05-10 08:00:00, the monitoring data of the last 3,600 seconds in the time range is queried.
    * 
    * The following formats are supported:
    * 
-   * *   UNIX timestamp: the number of milliseconds that have elapsed since 00:00:00 UTC on Thursday, January 1, 1970.
-   * *   UTC time: the UTC time that follows the YYYY-MM-DDThh:mm:ssZ format.
+   * - UNIX timestamp: the number of milliseconds that have elapsed since 00:00:00 UTC on Thursday, January 1, 1970.
+   * 
+   * - UTC time: the UTC time that follows the YYYY-MM-DDThh:mm:ssZ format.
    * 
-   * >  We recommend that you use UNIX timestamps to prevent time zone-related issues.
+   * > We recommend that you use UNIX timestamps to prevent time zone-related issues.
    * 
    * @example
    * 1618368960000
@@ -42,7 +45,7 @@ export class DescribeMetricDataRequest extends $dara.Model {
    * @remarks
    * The expression that is used to compute the query results in real time.
    * 
-   * >  Only the `groupby` expression is supported. This expression is similar to the `GROUP BY` statement that is used in databases.
+   * > Only the `groupby` expression is supported. This expression is similar to the `GROUP BY` statement that is used in databases.
    * 
    * @example
    * {"groupby":["userId","instanceId"]}
@@ -54,7 +57,7 @@ export class DescribeMetricDataRequest extends $dara.Model {
    * 
    * Default value: 1000.
    * 
-   * >  The maximum value of the Length parameter in a request is 1440.
+   * > The maximum value of the Length parameter in a request is 1440.
    * 
    * @example
    * 1000
@@ -92,11 +95,11 @@ export class DescribeMetricDataRequest extends $dara.Model {
    * 
    * Unit: seconds.
    * 
-   * > 
+   * >
    * 
-   * *   If this parameter is not specified, monitoring data is queried based on the period in which metric values are reported.
+   * - If this parameter is not specified, monitoring data is queried based on the period in which metric values are reported.
    * 
-   * *   For more information about the statistical period of a metric that is specified by the `MetricName` parameter, see [Appendix 1: Metrics](https://help.aliyun.com/document_detail/163515.html).
+   * - For more information about the statistical period of a metric that is specified by the `MetricName` parameter, see [Appendix 1: Metrics](https://help.aliyun.com/document_detail/163515.html).
    * 
    * @example
    * 60
@@ -107,24 +110,27 @@ export class DescribeMetricDataRequest extends $dara.Model {
    * @remarks
    * The start of the time range to query monitoring data.
    * 
-   * *   If the `StartTime` and `EndTime` parameters are not specified, the monitoring data of the last statistical period is queried.``
+   * - If the `StartTime` and `EndTime` parameters are not specified, the monitoring data of the last statistical period is queried.\\`\\`
    * 
-   * *   If the `StartTime` and `EndTime` parameters are specified, the monitoring data of the last statistical period in the specified time range is queried.```` The following examples demonstrate how to determine the period in which monitoring data is queried:
+   * - If the `StartTime` and `EndTime` parameters are specified, the monitoring data of the last statistical period in the specified time range is queried.\\`\\`\\`\\` The following examples demonstrate how to determine the period in which monitoring data is queried:
    * 
-   *     *   If you set the `Period` parameter to 15, the specified time range must be less than or equal to 20 minutes. For example, if you set the StartTime parameter to 2021-05-08 08:10:00 and the EndTime parameter to 2021-05-08 08:30:00, the monitoring data of the last 15 seconds in the time range is queried.
-   *     *   If you set the `Period` to 60 or 900, the specified time range must be less than or equal to 2 hours. For example, if you set the Period parameter to 60, the StartTime parameter to 2021-05-08 08:00:00, and the EndTime parameter to 2021-05-08 10:00:00, the monitoring data of the last 60 seconds in the time range is queried.
-   *     *   If you set the `Period` parameter to 3600, the specified time range must be less than or equal to 2 days. For example, if you set the StartTime parameter to 2021-05-08 08:00:00 and the EndTime parameter to 2021-05-10 08:00:00, the monitoring data of the last 3,600 seconds in the time range is queried.
+   *   - If you set the `Period` parameter to 15, the specified time range must be less than or equal to 20 minutes. For example, if you set the StartTime parameter to 2021-05-08 08:10:00 and the EndTime parameter to 2021-05-08 08:30:00, the monitoring data of the last 15 seconds in the time range is queried.
+   * 
+   *   - If you set the `Period` to 60 or 900, the specified time range must be less than or equal to 2 hours. For example, if you set the Period parameter to 60, the StartTime parameter to 2021-05-08 08:00:00, and the EndTime parameter to 2021-05-08 10:00:00, the monitoring data of the last 60 seconds in the time range is queried.
+   * 
+   *   - If you set the `Period` parameter to 3600, the specified time range must be less than or equal to 2 days. For example, if you set the StartTime parameter to 2021-05-08 08:00:00 and the EndTime parameter to 2021-05-10 08:00:00, the monitoring data of the last 3,600 seconds in the time range is queried.
    * 
    * The following formats are supported:
    * 
-   * *   UNIX timestamp: the number of milliseconds that have elapsed since 00:00:00 UTC on Thursday, January 1, 1970.
-   * *   UTC time: the UTC time that follows the YYYY-MM-DDThh:mm:ssZ format.
+   * - UNIX timestamp: the number of milliseconds that have elapsed since 00:00:00 UTC on Thursday, January 1, 1970.
+   * 
+   * - UTC time: the UTC time that follows the YYYY-MM-DDThh:mm:ssZ format.
    * 
-   * > 
+   * >
    * 
-   * *   You must set the `StartTime` parameter to a point in time that is later than 00:00:00 UTC on Thursday, January 1, 1970. Otherwise, this parameter is invalid.
+   * - You must set the `StartTime` parameter to a point in time that is later than 00:00:00 UTC on Thursday, January 1, 1970. Otherwise, this parameter is invalid.
    * 
-   * *   We recommend that you use UNIX timestamps to prevent time zone-related issues.
+   * - We recommend that you use UNIX timestamps to prevent time zone-related issues.
    * 
    * @example
    * 1618368900000

package/src/models/DescribeMetricDataResponseBody.ts

@@ -7,7 +7,7 @@ export class DescribeMetricDataResponseBody extends $dara.Model {
    * @remarks
    * The HTTP status code.
    * 
-   * >  The status code 200 indicates that the request was successful.
+   * > The status code 200 indicates that the request was successful.
    * 
    * @example
    * 200
@@ -17,10 +17,13 @@ export class DescribeMetricDataResponseBody extends $dara.Model {
    * @remarks
    * The monitoring data. The value includes the following fields:
    * 
-   * *   `timestamp`: the time when the alert was triggered.
-   * *   `userId`: the ID of the user for which the alert was triggered.
-   * *   `instanceId`: the ID of the instance for which the alert was triggered.
-   * *   `Minimum`, `Average`, and `Maximum`: the aggregation methods.
+   * - `timestamp`: the time when the alert was triggered.
+   * 
+   * - `userId`: the ID of the user for which the alert was triggered.
+   * 
+   * - `instanceId`: the ID of the instance for which the alert was triggered.
+   * 
+   * - `Minimum`, `Average`, and `Maximum`: the aggregation methods.
    * 
    * @example
    * [{\\"timestamp\\":1618368900000,\\"Average\\":95.8291666666667,\\"Minimum\\":65.48,\\"Maximum\\":100.0},{\\"timestamp\\":1618368960000,\\"Average\\":95.8683333333333,\\"Minimum\\":67.84,\\"Maximum\\":100.0}]

package/src/models/DescribeMetricLastRequest.ts

@@ -9,19 +9,21 @@ export class DescribeMetricLastRequest extends $dara.Model {
    * 
    * Set the value to a collection of `key:value` pairs. Example: `{"userId":"120886317861****"}` or `{"instanceId":"i-2ze2d6j5uhg20x47****"}`.
    * 
-   * >  You can query a maximum of 50 instances in each request.
+   * > You can query a maximum of 50 instances in each request.
    * 
    * @example
-   * [{"instanceId":"i-abcdefgh12****"}]
+   * [{"instanceId":"i-2ze2d6j5uhg20x47****"}]
    */
   dimensions?: string;
   /**
    * @remarks
    * The end of the time range to query monitoring data.
    * 
-   * *   For second-level data, the start time is obtained by comparing the time that is specified by the StartTime parameter and 20 minutes earlier of the time that is specified by the EndTime parameter. The earlier one of the compared points in time is used as the start time.
-   * *   For minute-level data, the start time is obtained by comparing the time that is specified by the StartTime parameter and 2 hours earlier of the time that is specified by the EndTime parameter. The earlier one of the compared points in time is used as the start time.
-   * *   For hour-level data, the start time is obtained by comparing the time that is specified by the StartTime parameter and two days earlier of the time that is specified by the EndTime parameter. The earlier one of the compared points in time is used as the start time.
+   * - For second-level data, the start time is obtained by comparing the time that is specified by the StartTime parameter and 20 minutes earlier of the time that is specified by the EndTime parameter. The earlier one of the compared points in time is used as the start time.
+   * 
+   * - For minute-level data, the start time is obtained by comparing the time that is specified by the StartTime parameter and 2 hours earlier of the time that is specified by the EndTime parameter. The earlier one of the compared points in time is used as the start time.
+   * 
+   * - For hour-level data, the start time is obtained by comparing the time that is specified by the StartTime parameter and two days earlier of the time that is specified by the EndTime parameter. The earlier one of the compared points in time is used as the start time.
    * 
    * @example
    * 2019-01-31 10:10:00
@@ -41,7 +43,7 @@ export class DescribeMetricLastRequest extends $dara.Model {
    * 
    * Default value: 1000. This value indicates that a maximum of 1,000 entries of monitoring data can be returned on each page.
    * 
-   * >  The maximum value of the Length parameter for each request is 1440.
+   * > The maximum value of the Length parameter for each request is 1440.
    * 
    * @example
    * 1000
@@ -75,8 +77,9 @@ export class DescribeMetricLastRequest extends $dara.Model {
    * @remarks
    * The pagination token.
    * 
-   * *   If the number of results exceeds the maximum number of entries allowed on a single page, a pagination token is returned.
-   * *   This token can be used as an input parameter to obtain the next page of results. If all results are obtained, no token is returned.
+   * - If the number of results exceeds the maximum number of entries allowed on a single page, a pagination token is returned.
+   * 
+   * - This token can be used as an input parameter to obtain the next page of results. If all results are obtained, no token is returned.
    * 
    * @example
    * 15761432850009dd70bb64cff1f0fff6c0b08ffff073be5fb1e785e2b020f7fed9b5e137bd810a6d6cff5ae****
@@ -90,9 +93,9 @@ export class DescribeMetricLastRequest extends $dara.Model {
    * 
    * Unit: seconds.
    * 
-   * > 
+   * >
    * 
-   * *   If this parameter is not specified, monitoring data is queried based on the period in which metric values are reported. The statistical period of metrics (`MetricName`) varies for each cloud service. The statistical period of metrics is displayed in the `MinPeriods` column on the **Metrics** page for each cloud service. For more information, see [Appendix 1: Metrics](https://help.aliyun.com/document_detail/163515.html).
+   * - If this parameter is not specified, monitoring data is queried based on the period in which metric values are reported. The statistical period of metrics (`MetricName`) varies for each cloud service. The statistical period of metrics is displayed in the `MinPeriods` column on the **Metrics** page for each cloud service. For more information, see [Appendix 1: Metrics](https://help.aliyun.com/document_detail/163515.html).
    * 
    * @example
    * 60

package/src/models/DescribeMetricLastResponseBody.ts

@@ -7,7 +7,7 @@ export class DescribeMetricLastResponseBody extends $dara.Model {
    * @remarks
    * The HTTP status code.
    * 
-   * >  The status code 200 indicates that the request was successful.
+   * > The status code 200 indicates that the request was successful.
    * 
    * @example
    * 200
@@ -59,8 +59,9 @@ export class DescribeMetricLastResponseBody extends $dara.Model {
    * @remarks
    * Indicates whether the request was successful. Valid values:
    * 
-   * *   true
-   * *   false
+   * - true
+   * 
+   * - false
    * 
    * @example
    * true

package/src/models/DescribeMetricListRequest.ts

@@ -5,22 +5,25 @@ import * as $dara from '@darabonba/typescript';
 export class DescribeMetricListRequest extends $dara.Model {
   /**
    * @remarks
-   * The dimensions that specify the resources whose monitoring data you want to query.
+   * The dimensions that specify the resources to be monitored.
    * 
-   * Set the value to a collection of key-value pairs. A typical key-value pair is `instanceId:i-2ze2d6j5uhg20x47****`.
+   * Format: a collection of key-value pairs, such as `{"userId":"120886317861****"}` and `{"instanceId":"i-2ze2d6j5uhg20x47****"}`.
    * 
-   * >  You can query a maximum of 50 instances in a single request.
+   * > A single request can be used to query a maximum of 50 instances.
    * 
    * @example
-   * [{"instanceId": "i-abcdefgh12****"}]
+   * [{"instanceId":"i-2ze2d6j5uhg20x47****"}]
    */
   dimensions?: string;
   /**
    * @remarks
    * The end of the time range to query. The following formats are supported:
    * 
-   * *   UNIX timestamp: the number of milliseconds that have elapsed since 00:00:00 Thursday, January 1, 1970
-   * *   UTC time: the UTC time that follows the YYYY-MM-DDThh:mm:ssZ format
+   * - UNIX timestamp: the number of milliseconds that have elapsed since 00:00:00 UTC on January 1, 1970.
+   * 
+   * - Format: YYYY-MM-DD hh:mm:ss.
+   * 
+   * > The interval between \\`StartTime\\` and \\`EndTime\\` must be less than or equal to 31 days.
    * 
    * @example
    * 2019-01-30 00:10:00
@@ -28,9 +31,9 @@ export class DescribeMetricListRequest extends $dara.Model {
   endTime?: string;
   /**
    * @remarks
-   * The expression that is used to compute the query results in real time.
+   * The expression that is used for real-time computing based on the query results.
    * 
-   * >  Only the groupby expression is supported. This expression is similar to the GROUP BY statement that is used in databases.
+   * > Only the groupby expression is supported. This expression is similar to the GROUP BY statement in databases.
    * 
    * @example
    * {"groupby":["userId","instanceId"]}
@@ -38,9 +41,9 @@ export class DescribeMetricListRequest extends $dara.Model {
   express?: string;
   /**
    * @remarks
-   * The number of entries to return on each page.
+   * The number of entries to return on each page for a paged query.
    * 
-   * >  The maximum value of the Length parameter in a request is 1440.
+   * > The maximum value of \\`Length\\` in a single request is 1440.
    * 
    * @example
    * 1000
@@ -50,7 +53,7 @@ export class DescribeMetricListRequest extends $dara.Model {
    * @remarks
    * The name of the metric.
    * 
-   * For more information about metric names, see [Appendix 1: Metrics](https://help.aliyun.com/document_detail/163515.html).
+   * For more information, see [Metrics](https://help.aliyun.com/document_detail/163515.html).
    * 
    * This parameter is required.
    * 
@@ -60,9 +63,9 @@ export class DescribeMetricListRequest extends $dara.Model {
   metricName?: string;
   /**
    * @remarks
-   * The namespace of the cloud service. Format: acs_service name.
+   * The namespace of the cloud service.
    * 
-   * For more information about the namespaces of cloud services, see [Appendix 1: Metrics](https://help.aliyun.com/document_detail/163515.html).
+   * For more information, see [Metrics](https://help.aliyun.com/document_detail/163515.html).
    * 
    * This parameter is required.
    * 
@@ -72,9 +75,9 @@ export class DescribeMetricListRequest extends $dara.Model {
   namespace?: string;
   /**
    * @remarks
-   * The paging token.
+   * The pagination cursor.
    * 
-   * >  If this parameter is not specified, the data on the first page is returned. A return value other than Null of this parameter indicates that not all entries have been returned. You can use this value as an input parameter to obtain entries on the next page. The value Null indicates that all query results have been returned.
+   * > If you do not set this parameter, the first page of data is returned. If a value is returned for this parameter, it indicates that more data is available. To retrieve the next page, use the returned value as the \\`NextToken\\` in your next request. A null value indicates that all data has been retrieved.
    * 
    * @example
    * 15761485350009dd70bb64cff1f0fff750b08ffff073be5fb1e785e2b020f1a949d5ea14aea7fed82f01dd8****
@@ -82,13 +85,15 @@ export class DescribeMetricListRequest extends $dara.Model {
   nextToken?: string;
   /**
    * @remarks
-   * The interval at which the monitoring data is queried.
+   * The statistical period of the monitoring data.
    * 
-   * Valid values: 60, 300, and 900.
+   * Valid values: 15, 60, 900, and 3600.
    * 
    * Unit: seconds.
    * 
-   * >  Configure this parameter based on your business scenario.
+   * > - If you do not set this parameter, the reporting period that was specified when the metric was registered is used.
+   * 
+   * - The statistical period of each metric (`MetricName`) of a cloud service is different. For more information, see [Metrics](https://help.aliyun.com/document_detail/163515.html).
    * 
    * @example
    * 60
@@ -99,10 +104,13 @@ export class DescribeMetricListRequest extends $dara.Model {
    * @remarks
    * The beginning of the time range to query. The following formats are supported:
    * 
-   * *   UNIX timestamp: the number of milliseconds that have elapsed since 00:00:00 Thursday, January 1, 1970
-   * *   UTC time: the UTC time that follows the YYYY-MM-DDThh:mm:ssZ format
+   * - UNIX timestamp: the number of milliseconds that have elapsed since 00:00:00 UTC on January 1, 1970.
+   * 
+   * - Format: YYYY-MM-DD hh:mm:ss.
+   * 
+   * > * The time range is a left-open and right-closed interval. The value of \\`StartTime\\` must be earlier than the value of \\`EndTime\\`.
    * 
-   * >  The specified period includes the end time and excludes the start time. The start time must be earlier than the end time.
+   * - The interval between \\`StartTime\\` and \\`EndTime\\` must be less than or equal to 31 days.
    * 
    * @example
    * 2019-01-30 00:00:00

package/src/models/DescribeMetricListResponseBody.ts

@@ -5,9 +5,9 @@ import * as $dara from '@darabonba/typescript';
 export class DescribeMetricListResponseBody extends $dara.Model {
   /**
    * @remarks
-   * The HTTP status code.
+   * The status code.
    * 
-   * >  The status code 200 indicates that the call was successful.
+   * > A value of 200 indicates that the call was successful.
    * 
    * @example
    * 200
@@ -15,7 +15,7 @@ export class DescribeMetricListResponseBody extends $dara.Model {
   code?: string;
   /**
    * @remarks
-   * The monitoring data.
+   * The list of monitoring data.
    * 
    * @example
    * [{"timestamp":1548777660000,"userId":"120886317861****","instanceId":"i-abc","Minimum":9.92,"Average":9.92,"Maximum":9.92}]
@@ -31,7 +31,7 @@ export class DescribeMetricListResponseBody extends $dara.Model {
   message?: string;
   /**
    * @remarks
-   * The paging token.
+   * The pagination cursor.
    * 
    * @example
    * 15761441850009dd70bb64cff1f0fff6d0b08ffff073be5fb1e785e2b020f7fed9b5e137bd810a6d6cff5ae****
@@ -39,7 +39,7 @@ export class DescribeMetricListResponseBody extends $dara.Model {
   nextToken?: string;
   /**
    * @remarks
-   * The interval at which the monitoring data is queried. Unit: seconds. Valid values: 60, 300, and 900.
+   * The statistical period. Unit: seconds. Valid values: 60, 300, and 900.
    * 
    * @example
    * 60
@@ -47,7 +47,7 @@ export class DescribeMetricListResponseBody extends $dara.Model {
   period?: string;
   /**
    * @remarks
-   * The ID of the request.
+   * The request ID.
    * 
    * @example
    * 3121AE7D-4AFF-4C25-8F1D-C8226EBB1F42
@@ -55,10 +55,11 @@ export class DescribeMetricListResponseBody extends $dara.Model {
   requestId?: string;
   /**
    * @remarks
-   * Indicates whether the call was successful. Valid values:
+   * Indicates whether the operation was successful. Valid values:
    * 
-   * *   true: The call was successful.
-   * *   false: The call failed.
+   * - true: The operation was successful.
+   * 
+   * - false: The operation failed.
    * 
    * @example
    * true

package/src/models/DescribeMetricMetaListRequest.ts

@@ -7,14 +7,19 @@ export class DescribeMetricMetaListRequest extends $dara.Model {
    * @remarks
    * The tags for filtering metrics. Specify a JSON string.
    * 
-   * Format: ` [{"name":"tag key","value":"tag value"},{"name":"tag key","value":"tag value"}]  `. The following tags are available:
+   * Format: `[{"name":"tag key","value":"tag value"},{"name":"tag key","value":"tag value"}] `. The following tags are available:
    * 
-   * *   metricCategory: the category of the metric.
-   * *   alertEnable: specifies whether to report alerts for the metric.
-   * *   alertUnit: the unit of the metric in the alerts.
-   * *   unitFactor: the factor for metric unit conversion.
-   * *   minAlertPeriod: the minimum interval at which the alert is reported.
-   * *   productCategory: the category of the service.
+   * - metricCategory: the category of the metric.
+   * 
+   * - alertEnable: specifies whether to report alerts for the metric.
+   * 
+   * - alertUnit: the unit of the metric in the alerts.
+   * 
+   * - unitFactor: the factor for metric unit conversion.
+   * 
+   * - minAlertPeriod: the minimum interval at which the alert is reported.
+   * 
+   * - productCategory: the category of the service.
    * 
    * @example
    * [{"name":"productCategory","value":"kvstore_old"}]

package/src/models/DescribeMetricMetaListResponseBody.ts

@@ -3,80 +3,13 @@ import * as $dara from '@darabonba/typescript';
 
 
 export class DescribeMetricMetaListResponseBodyResourcesResource extends $dara.Model {
-  /**
-   * @remarks
-   * The metric description.
-   * 
-   * @example
-   * CPUUtilization
-   */
   description?: string;
-  /**
-   * @remarks
-   * The monitoring dimensions of the resource. Multiple monitoring dimensions are separated with commas (,).
-   * 
-   * @example
-   * instanceId
-   */
   dimensions?: string;
-  /**
-   * @remarks
-   * The tags of the metric, including one or more JSON strings.
-   * 
-   * Format: `[{"name":"tag key","value":"tag value"}]`. The `name` can be repeated. The following tags are available:
-   * 
-   * *   metricCategory: the category of the metric.
-   * *   alertEnable: indicates whether to report alerts for the metric.
-   * *   alertUnit: the unit of the metric in the alerts.
-   * *   unitFactor: the factor for metric unit conversion.
-   * *   minAlertPeriod: the minimum interval at which the alert is reported.
-   * *   productCategory: the category of the service.
-   * 
-   * @example
-   * [{\\"name\\":\\"alertUnit\\",\\"value\\":\\"Bytes\\"},{\\"name\\":\\"minAlertPeriod\\",\\"value\\":\\"60\\"},{\\"name\\":\\"metricCategory\\",\\"value\\":\\"instanceId\\"},{\\"name\\":\\"instanceType\\",\\"value\\":\\"disaster\\"},{\\"name\\":\\"is_alarm\\",\\"value\\":\\"true\\"},{\\"name\\":\\"productCategory\\",\\"value\\":\\"kvstore_old\\"}]
-   */
   labels?: string;
-  /**
-   * @remarks
-   * The metric name.
-   * 
-   * @example
-   * CPUUtilization
-   */
   metricName?: string;
-  /**
-   * @remarks
-   * The namespace of the cloud service.
-   * 
-   * @example
-   * acs_kvstore
-   */
   namespace?: string;
-  /**
-   * @remarks
-   * The statistical periods of the metric. Multiple statistical periods are separated with commas (,).
-   * 
-   * Unit: seconds.
-   * 
-   * @example
-   * 60,300
-   */
   periods?: string;
-  /**
-   * @remarks
-   * The statistical method. Multiple statistical methods are separated with commas (,).
-   * 
-   * @example
-   * Average,Minimum,Maximum
-   */
   statistics?: string;
-  /**
-   * @remarks
-   * The unit of the metric.
-   * 
-   * @example
-   * %
-   */
   unit?: string;
   static names(): { [key: string]: string } {
     return {
@@ -144,7 +77,7 @@ export class DescribeMetricMetaListResponseBody extends $dara.Model {
    * @remarks
    * The response code.
    * 
-   * >  The status code 200 indicates that the request was successful.
+   * > The status code 200 indicates that the request was successful.
    * 
    * @example
    * 200
@@ -163,20 +96,17 @@ export class DescribeMetricMetaListResponseBody extends $dara.Model {
    * The request ID.
    * 
    * @example
-   * 0CCE0AF0-053C-4B13-A583-DC9A85785D49
+   * CDE9EAFF-D54E-4024-BBFC-B0AAC883143B
    */
   requestId?: string;
-  /**
-   * @remarks
-   * The configuration of the metrics in the resources.
-   */
   resources?: DescribeMetricMetaListResponseBodyResources;
   /**
    * @remarks
    * Indicates whether the request was successful. Valid values:
    * 
-   * *   true
-   * *   false
+   * - true
+   * 
+   * - false
    * 
    * @example
    * true
@@ -187,7 +117,7 @@ export class DescribeMetricMetaListResponseBody extends $dara.Model {
    * The total number of entries returned.
    * 
    * @example
-   * 12
+   * 10
    */
   totalCount?: string;
   static names(): { [key: string]: string } {