@alicloud/appstream-center20210901 5.6.2 → 5.6.4

package/src/models/ApproveOtaTaskRequest.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class ApproveOtaTaskRequest extends $dara.Model {
   /**
    * @remarks
-   * The delivery group ID. You can call [ListAppInstanceGroup](~~ListAppInstanceGroup~~) to obtain the ID.
+   * The delivery group ID. You can call [ListAppInstanceGroup](~~ListAppInstanceGroup~~) to obtain this value.
    * 
    * This parameter is required.
    * 
@@ -25,7 +25,7 @@ export class ApproveOtaTaskRequest extends $dara.Model {
   bizRegionId?: string;
   /**
    * @remarks
-   * The over-the-air upgrade task type.
+   * The OTA upgrade task type.
    * 
    * This parameter is required.
    * 
@@ -35,7 +35,7 @@ export class ApproveOtaTaskRequest extends $dara.Model {
   otaType?: string;
   /**
    * @remarks
-   * The start time of the over-the-air upgrade task. Specify the time in ISO 8601 format.
+   * The start time of the OTA upgrade task. Specify the time in ISO 8601 format.
    * 
    * This parameter is required.
    * 
@@ -47,9 +47,9 @@ export class ApproveOtaTaskRequest extends $dara.Model {
   startTime?: string;
   /**
    * @remarks
-   * The over-the-air upgrade task ID. You can call [ListAppInstanceGroup](~~ListAppInstanceGroup~~) to obtain the ID.
+   * The OTA upgrade task ID. You can call [ListAppInstanceGroup](~~ListAppInstanceGroup~~) to obtain this value.
    * 
-   * > Each successful call of `ApproveOtaTask` causes the `TaskId` to change. Therefore, before calling this operation again, call `ListAppInstanceGroup` again to obtain the latest `TaskId`.
+   * > Each successful call to `ApproveOtaTask` causes the `TaskId` to change. Therefore, before calling this operation again, call `ListAppInstanceGroup` again to obtain the latest `TaskId`.
    * 
    * This parameter is required.
    * 

package/src/models/AssignWuyingServerPrivateAddressesRequest.ts

@@ -5,6 +5,8 @@ import * as $dara from '@darabonba/typescript';
 export class AssignWuyingServerPrivateAddressesRequest extends $dara.Model {
   /**
    * @remarks
+   * The number of secondary private IP addresses to assign. Valid values: 1 to 50.
+   * 
    * This parameter is required.
    * 
    * @example
@@ -13,6 +15,8 @@ export class AssignWuyingServerPrivateAddressesRequest extends $dara.Model {
   secondaryPrivateIpAddressCount?: number;
   /**
    * @remarks
+   * The ID of the development host.
+   * 
    * This parameter is required.
    * 
    * @example

package/src/models/AssignWuyingServerPrivateAddressesResponseBody.ts

@@ -3,8 +3,15 @@ import * as $dara from '@darabonba/typescript';
 
 
 export class AssignWuyingServerPrivateAddressesResponseBody extends $dara.Model {
+  /**
+   * @remarks
+   * The list of assigned secondary private IP addresses.
+   */
   assignedPrivateIpAddresses?: string[];
   /**
+   * @remarks
+   * The request ID.
+   * 
    * @example
    * 1CBAFFAB-B697-4049-A9B1-67E1FC5F****
    */

package/src/models/AuthorizeInstanceGroupRequest.ts

@@ -7,7 +7,7 @@ import * as $dara from '@darabonba/typescript';
 export class AuthorizeInstanceGroupRequestUserMeta extends $dara.Model {
   /**
    * @remarks
-   * The AD domain name.
+   * AD 網域名稱。
    * 
    * @example
    * example.com
@@ -15,7 +15,7 @@ export class AuthorizeInstanceGroupRequestUserMeta extends $dara.Model {
   adDomain?: string;
   /**
    * @remarks
-   * The user type.
+   * 使用者類型。
    * 
    * @example
    * simple
@@ -47,7 +47,7 @@ export class AuthorizeInstanceGroupRequestUserMeta extends $dara.Model {
 export class AuthorizeInstanceGroupRequest extends $dara.Model {
   /**
    * @remarks
-   * The delivery group ID. You can call the [ListAppInstanceGroup](https://help.aliyun.com/document_detail/428506.html) operation to obtain the value.
+   * 交付群組 ID。可呼叫 [ListAppInstanceGroup](https://help.aliyun.com/document_detail/428506.html) 介面取得。
    * 
    * This parameter is required.
    * 
@@ -57,7 +57,7 @@ export class AuthorizeInstanceGroupRequest extends $dara.Model {
   appInstanceGroupId?: string;
   /**
    * @remarks
-   * The persistent session ID.
+   * 持續性工作階段 ID。
    * 
    * @example
    * p-0cc7s3mw2fg4j****
@@ -65,7 +65,7 @@ export class AuthorizeInstanceGroupRequest extends $dara.Model {
   appInstancePersistentId?: string;
   /**
    * @remarks
-   * The list of user group IDs to be authorized.
+   * 授權使用者群組 ID 清單。
    * 
    * **if can be null:**
    * true
@@ -73,14 +73,14 @@ export class AuthorizeInstanceGroupRequest extends $dara.Model {
   authorizeUserGroupIds?: string[];
   /**
    * @remarks
-   * The list of usernames to be authorized for the delivery group. You can specify 1 to 100 usernames.
+   * 要新增交付群組授權的使用者名稱清單。可設定 1\\~100 個。
    */
   authorizeUserIds?: string[];
   /**
    * @remarks
-   * The user avatar ID.
+   * 使用者分身 ID。
    * 
-   * > This parameter is not available for public use.
+   * > 此參數未開放使用。
    * 
    * @example
    * default
@@ -88,7 +88,7 @@ export class AuthorizeInstanceGroupRequest extends $dara.Model {
   avatarId?: string;
   /**
    * @remarks
-   * The product type.
+   * 產品類型。
    * 
    * This parameter is required.
    * 
@@ -98,7 +98,7 @@ export class AuthorizeInstanceGroupRequest extends $dara.Model {
   productType?: string;
   /**
    * @remarks
-   * The list of user group IDs to be deauthorized.
+   * 取消授權使用者群組 ID 清單。
    * 
    * **if can be null:**
    * true
@@ -106,12 +106,12 @@ export class AuthorizeInstanceGroupRequest extends $dara.Model {
   unAuthorizeUserGroupIds?: string[];
   /**
    * @remarks
-   * The list of usernames to be deauthorized from the delivery group. You can specify 1 to 100 usernames.
+   * 要移除交付群組授權的使用者名稱清單。可設定 1\\~100 個。
    */
   unAuthorizeUserIds?: string[];
   /**
    * @remarks
-   * The user information.
+   * 使用者資訊。
    */
   userMeta?: AuthorizeInstanceGroupRequestUserMeta;
   static names(): { [key: string]: string } {

package/src/models/AuthorizeInstanceGroupResponseBody.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class AuthorizeInstanceGroupResponseBody extends $dara.Model {
   /**
    * @remarks
-   * The request ID.
+   * 請求 ID。
    * 
    * @example
    * 1CBAFFAB-B697-4049-A9B1-67E1FC5F****

package/src/models/AuthorizeInstanceGroupShrinkRequest.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class AuthorizeInstanceGroupShrinkRequest extends $dara.Model {
   /**
    * @remarks
-   * The delivery group ID. You can call the [ListAppInstanceGroup](https://help.aliyun.com/document_detail/428506.html) operation to obtain the value.
+   * 交付群組 ID。可呼叫 [ListAppInstanceGroup](https://help.aliyun.com/document_detail/428506.html) 介面取得。
    * 
    * This parameter is required.
    * 
@@ -15,7 +15,7 @@ export class AuthorizeInstanceGroupShrinkRequest extends $dara.Model {
   appInstanceGroupId?: string;
   /**
    * @remarks
-   * The persistent session ID.
+   * 持續性工作階段 ID。
    * 
    * @example
    * p-0cc7s3mw2fg4j****
@@ -23,7 +23,7 @@ export class AuthorizeInstanceGroupShrinkRequest extends $dara.Model {
   appInstancePersistentId?: string;
   /**
    * @remarks
-   * The list of user group IDs to be authorized.
+   * 授權使用者群組 ID 清單。
    * 
    * **if can be null:**
    * true
@@ -31,14 +31,14 @@ export class AuthorizeInstanceGroupShrinkRequest extends $dara.Model {
   authorizeUserGroupIds?: string[];
   /**
    * @remarks
-   * The list of usernames to be authorized for the delivery group. You can specify 1 to 100 usernames.
+   * 要新增交付群組授權的使用者名稱清單。可設定 1\\~100 個。
    */
   authorizeUserIds?: string[];
   /**
    * @remarks
-   * The user avatar ID.
+   * 使用者分身 ID。
    * 
-   * > This parameter is not available for public use.
+   * > 此參數未開放使用。
    * 
    * @example
    * default
@@ -46,7 +46,7 @@ export class AuthorizeInstanceGroupShrinkRequest extends $dara.Model {
   avatarId?: string;
   /**
    * @remarks
-   * The product type.
+   * 產品類型。
    * 
    * This parameter is required.
    * 
@@ -56,7 +56,7 @@ export class AuthorizeInstanceGroupShrinkRequest extends $dara.Model {
   productType?: string;
   /**
    * @remarks
-   * The list of user group IDs to be deauthorized.
+   * 取消授權使用者群組 ID 清單。
    * 
    * **if can be null:**
    * true
@@ -64,12 +64,12 @@ export class AuthorizeInstanceGroupShrinkRequest extends $dara.Model {
   unAuthorizeUserGroupIds?: string[];
   /**
    * @remarks
-   * The list of usernames to be deauthorized from the delivery group. You can specify 1 to 100 usernames.
+   * 要移除交付群組授權的使用者名稱清單。可設定 1\\~100 個。
    */
   unAuthorizeUserIds?: string[];
   /**
    * @remarks
-   * The user information.
+   * 使用者資訊。
    */
   userMetaShrink?: string;
   static names(): { [key: string]: string } {

package/src/models/BatchCreateLlmTemplatesRequest.ts

@@ -37,7 +37,7 @@ export class BatchCreateLlmTemplatesRequestLlmTemplateItems extends $dara.Model
   description?: string;
   /**
    * @remarks
-   * Specifies whether to set this model as the default model. Each model group can have at most one default model.
+   * Specifies whether to set the model as the default model. A model group can have at most one default model.
    * 
    * @example
    * false

package/src/models/BatchCreateLlmTemplatesResponseBody.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class BatchCreateLlmTemplatesResponseBodyDataSkippedItems extends $dara.Model {
   /**
    * @remarks
-   * The model code that is skipped.
+   * The model code that was skipped.
    * 
    * @example
    * qwen3.5-plus
@@ -13,7 +13,7 @@ export class BatchCreateLlmTemplatesResponseBodyDataSkippedItems extends $dara.M
   llmCode?: string;
   /**
    * @remarks
-   * The reason why the model is skipped.
+   * The reason why the item was skipped.
    * 
    * @example
    * LLM template already exists with same providerTemplateId and llmCode.
@@ -45,7 +45,7 @@ export class BatchCreateLlmTemplatesResponseBodyDataSkippedItems extends $dara.M
 export class BatchCreateLlmTemplatesResponseBodyData extends $dara.Model {
   /**
    * @remarks
-   * The list of IDs of the model templates that are created.
+   * The list of successfully created model template IDs.
    */
   llmTemplateIds?: string[];
   /**
@@ -55,7 +55,7 @@ export class BatchCreateLlmTemplatesResponseBodyData extends $dara.Model {
   skippedItems?: BatchCreateLlmTemplatesResponseBodyDataSkippedItems[];
   /**
    * @remarks
-   * The number of model templates that are created.
+   * The number of successfully created items.
    * 
    * @example
    * 5

package/src/models/ConfigRuntimeChannelRequest.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class ConfigRuntimeChannelRequest extends $dara.Model {
   /**
    * @remarks
-   * The Agent platform (such as ENTERPRISE or JVS).
+   * The Agent platform.
    * 
    * @example
    * ENTERPRISE
@@ -15,6 +15,10 @@ export class ConfigRuntimeChannelRequest extends $dara.Model {
    * @remarks
    * The Agent provider.
    * 
+   * - JVS Computer: set to OpenClaw.
+   * - OpenClaw: set to OpenClaw.
+   * - Hermes Agent: set to HermesAgent.
+   * 
    * This parameter is required.
    * 
    * @example
@@ -35,6 +39,23 @@ export class ConfigRuntimeChannelRequest extends $dara.Model {
    * @remarks
    * The channel configuration JSON string.
    * 
+   * - Simple configuration mode example:
+   * ```json
+   * {
+   *     "appKey": "abc",
+   *     "appSecret": "efg"
+   * }
+   * ```
+   * 
+   * - Custom configuration mode example:
+   * ```json
+   * {
+   *   "enabled": true,
+   *   "clientId": "xxx",
+   *   "clientSecret": "xxx"
+   * }
+   * ```
+   * 
    * This parameter is required.
    * 
    * @example

package/src/models/ConfigRuntimeModelTemplateResponseBody.ts

@@ -94,7 +94,7 @@ export class ConfigRuntimeModelTemplateResponseBody extends $dara.Model {
   requestId?: string;
   /**
    * @remarks
-   * The total number of entries.
+   * The total number of entries returned.
    * 
    * @example
    * 6

package/src/models/CreateAppInstanceGroupRequest.ts

@@ -85,12 +85,12 @@ export class CreateAppInstanceGroupRequestNetworkRoutes extends $dara.Model {
 export class CreateAppInstanceGroupRequestNetwork extends $dara.Model {
   /**
    * @remarks
-   * The domain name rule configurations.
+   * The domain name rule configuration.
    */
   domainRules?: CreateAppInstanceGroupRequestNetworkDomainRules[];
   /**
    * @remarks
-   * The duration (in minutes) after which the public IP address is refreshed upon the next logon. Minimum value: 60.
+   * The duration (in minutes) after which the public IP address is updated upon the next logon. Minimum value: 60.
    * 
    * @example
    * 60
@@ -106,7 +106,7 @@ export class CreateAppInstanceGroupRequestNetwork extends $dara.Model {
   officeSiteId?: string;
   /**
    * @remarks
-   * The route configurations. This parameter can be configured only when the network policy type (`StrategyType`) is set to mixed mode (`Mixed`).
+   * The route configuration. This parameter can be configured only when the network policy type (`StrategyType`) is set to mixed mode (`Mixed`).
    */
   routes?: CreateAppInstanceGroupRequestNetworkRoutes[];
   /**
@@ -217,7 +217,7 @@ export class CreateAppInstanceGroupRequestNodePoolRecurrenceSchedulesTimerPeriod
 export class CreateAppInstanceGroupRequestNodePoolRecurrenceSchedules extends $dara.Model {
   /**
    * @remarks
-   * The type of the recurrence schedule. You must specify both `RecurrenceType` and `RecurrenceValues`.
+   * The type of the policy execution cycle. You must specify both `RecurrenceType` and `RecurrenceValues`.
    * 
    * @example
    * weekly
@@ -225,18 +225,18 @@ export class CreateAppInstanceGroupRequestNodePoolRecurrenceSchedules extends $d
   recurrenceType?: string;
   /**
    * @remarks
-   * The list of recurrence values.
+   * The list of values for the policy execution cycle.
    */
   recurrenceValues?: number[];
   /**
    * @remarks
-   * The list of time periods for the recurrence schedule. Requirements for time period settings:
+   * The list of time periods for the policy execution cycle. Requirements for time period settings:
    * 
    * - You can add up to 3 time periods.
-   * - Time periods must not overlap.
+   * - Time periods cannot overlap.
    * - The interval between time periods must be at least 5 minutes.
    * - Each time period must be at least 15 minutes long.
-   * - All time periods combined must not span across days.
+   * - All time periods combined cannot span across days.
    */
   timerPeriods?: CreateAppInstanceGroupRequestNodePoolRecurrenceSchedulesTimerPeriods[];
   static names(): { [key: string]: string } {
@@ -273,7 +273,7 @@ export class CreateAppInstanceGroupRequestNodePoolRecurrenceSchedules extends $d
 export class CreateAppInstanceGroupRequestNodePool extends $dara.Model {
   /**
    * @remarks
-   * The maximum number of idle sessions. When this value is specified, auto scale-out is triggered only when the session usage exceeds `ScalingUsageThreshold` and the number of idle sessions in the current delivery group is less than `MaxIdleAppInstanceAmount`. Otherwise, the idle sessions are considered sufficient and no auto scale-out is performed. This parameter allows you to flexibly control elastic scaling behavior and reduce costs.
+   * The maximum number of idle sessions. When this value is specified, auto scale-out is triggered only when the session usage exceeds `ScalingUsageThreshold` and the number of idle sessions in the current delivery group is less than `MaxIdleAppInstanceAmount`. Otherwise, the idle sessions are considered sufficient and no auto scale-out is performed. This parameter helps you flexibly control elastic scaling behavior and reduce costs.
    * 
    * @example
    * 3
@@ -300,7 +300,7 @@ export class CreateAppInstanceGroupRequestNodePool extends $dara.Model {
   nodeAmount?: number;
   /**
    * @remarks
-   * The number of concurrent sessions, which is the number of sessions that a single resource can handle simultaneously. Too many concurrent sessions may degrade the application experience. The valid value range varies by resource specification. You can call the ListNodeInstanceType operation to obtain the valid value range for each resource specification.
+   * The number of concurrent sessions, which is the number of sessions that a single resource can handle simultaneously. Too many concurrent sessions may degrade the application experience. The valid values vary by resource specification. You can obtain the valid values for each specification by calling the ListNodeInstanceType operation.
    * 
    * @example
    * 2
@@ -308,7 +308,7 @@ export class CreateAppInstanceGroupRequestNodePool extends $dara.Model {
   nodeCapacity?: number;
   /**
    * @remarks
-   * The instance type ID of the resource to purchase. You can call the [ListNodeInstanceType](https://help.aliyun.com/document_detail/428502.html) operation to obtain the ID.
+   * The instance type ID of the resource to purchase. You can obtain the ID by calling the [ListNodeInstanceType](https://help.aliyun.com/document_detail/428502.html) operation.
    * 
    * @example
    * appstreaming.general.4c8g
@@ -316,14 +316,14 @@ export class CreateAppInstanceGroupRequestNodePool extends $dara.Model {
   nodeInstanceType?: string;
   /**
    * @remarks
-   * The list of recurrence schedules. This field is required when `StrategyType` (scaling mode) is set to `NODE_SCALING_BY_SCHEDULE` (scheduled scaling).
+   * The list of policy execution cycles. This field is required when `StrategyType` (scaling mode) is set to `NODE_SCALING_BY_SCHEDULE` (scheduled scaling).
    */
   recurrenceSchedules?: CreateAppInstanceGroupRequestNodePoolRecurrenceSchedules[];
   /**
    * @remarks
-   * The maximum duration (in minutes) that a resource without active sessions is retained. When no sessions are connected to a resource, a countdown starts based on this value. The resource is released when the countdown ends. Valid values: 5 to 120. Default value: 5. The following exceptions apply:
+   * The maximum duration (in minutes) that a resource without session connections is retained. When no sessions are connected to a resource, a countdown starts based on this value. The resource is released when the countdown ends. Valid values: 5 to 120. Default value: 5. The following exceptions apply:
    * 
-   * - If releasing the resource would trigger auto scale-out again, the scale-down is not performed to avoid repeated scaling operations.
+   * - If scale-in would trigger auto scale-out again, the scale-in is not performed to avoid repeated scaling operations.
    * - If auto scale-out is triggered due to increased sessions during this period, the resource is not released as originally planned, and the countdown restarts.
    * 
    * @example
@@ -332,7 +332,7 @@ export class CreateAppInstanceGroupRequestNodePool extends $dara.Model {
   scalingDownAfterIdleMinutes?: number;
   /**
    * @remarks
-   * The number of resources to create per scale-out operation. Valid values: 1 to 10. This field is required when `StrategyType` is set to `NODE_SCALING_BY_USAGE` (elastic resources).
+   * The number of resources created per scale-out operation. Valid values: 1 to 10. This field is required when `StrategyType` is set to `NODE_SCALING_BY_USAGE` (elastic resources).
    * 
    * @example
    * 2
@@ -340,7 +340,7 @@ export class CreateAppInstanceGroupRequestNodePool extends $dara.Model {
   scalingStep?: number;
   /**
    * @remarks
-   * The upper threshold of session usage (%). Auto scale-out is triggered when the session usage exceeds this threshold. The session usage is calculated as follows: `Session usage = Current sessions ÷ (Total resources × Concurrent sessions per resource) × 100%`. This field is required when `StrategyType` is set to `NODE_SCALING_BY_USAGE` (elastic resources). Valid values: 0 to 100. Default value: 85.
+   * The session usage threshold (%) that triggers auto scale-out. The formula for session usage is `Session usage = Current sessions ÷ (Total resources × Concurrent sessions per resource) × 100%`. This field is required when `StrategyType` is set to `NODE_SCALING_BY_USAGE` (elastic resources). Valid values: 0 to 100. Default value: 85.
    * 
    * @example
    * 85
@@ -348,7 +348,7 @@ export class CreateAppInstanceGroupRequestNodePool extends $dara.Model {
   scalingUsageThreshold?: string;
   /**
    * @remarks
-   * The date when the policy expires. Format: yyyy-MM-dd. The interval between the expiration date and the effective date must be between 7 days and 1 year, inclusive. This field is required when `StrategyType` (scaling mode) is set to `NODE_SCALING_BY_SCHEDULE` (scheduled scaling).
+   * The date when the policy expires. Format: yyyy-MM-dd. The interval between the expiration date and the effective date must be between 7 days and 1 year (inclusive). This field is required when `StrategyType` (scaling mode) is set to `NODE_SCALING_BY_SCHEDULE` (scheduled scaling).
    * 
    * @example
    * 2022-09-08
@@ -434,7 +434,7 @@ export class CreateAppInstanceGroupRequestNodePool extends $dara.Model {
 export class CreateAppInstanceGroupRequestRuntimePolicy extends $dara.Model {
   /**
    * @remarks
-   * Specifies whether to enable debug mode. To call `GetDebugAppInstance` and `CreateImageFromAppInstanceGroup`, set this field to `ON`.
+   * Specifies whether to enable debug mode. To call `GetDebugAppInstance` and `CreateImageFromAppInstanceGroup`, you must set this field to `ON`.
    * 
    * @example
    * OFF
@@ -442,8 +442,8 @@ export class CreateAppInstanceGroupRequestRuntimePolicy extends $dara.Model {
   debugMode?: string;
   /**
    * @remarks
-   * Specifies whether to allow only one application per session.
-   * - When enabled, opening multiple applications in the delivery group allocates a separate session for each application, consuming more sessions.
+   * Specifies whether only one application is allowed per session.
+   * - When enabled, if multiple applications in the delivery group are opened, a separate session is allocated for each application, consuming more sessions.
    * 
    * @example
    * false
@@ -451,7 +451,7 @@ export class CreateAppInstanceGroupRequestRuntimePolicy extends $dara.Model {
   perSessionPerApp?: boolean;
   /**
    * @remarks
-   * The scheduling mode for persistent sessions.
+   * The persistent session scheduling mode.
    * 
    * @example
    * DYNAMIC
@@ -462,7 +462,7 @@ export class CreateAppInstanceGroupRequestRuntimePolicy extends $dara.Model {
   persistentAppInstanceScheduleMode?: string;
   /**
    * @remarks
-   * Specifies whether to enable session pre-opening.
+   * The session pre-open switch.
    * - If not specified, the default value is true.
    * 
    * @example
@@ -479,8 +479,8 @@ export class CreateAppInstanceGroupRequestRuntimePolicy extends $dara.Model {
   sessionType?: string;
   /**
    * @remarks
-   * The generation mode for session users.
-   * - wyid: The session pre-open (SessionPreOpen) must be set to false.
+   * The generation mode of session users.
+   * - wyid: In this case, session pre-open (sessionPreOpen) must be set to false.
    * 
    * @example
    * wyid
@@ -562,7 +562,7 @@ export class CreateAppInstanceGroupRequestStoragePolicyUserProfile extends $dara
    * @remarks
    * The remote storage path for user data roaming.
    * - If not specified, the default value is the delivery group ID.
-   * - For cross-delivery-group (same VPC) user data roaming, set the same value for all delivery groups involved.
+   * - For cross-delivery-group (same VPC) user data roaming, set the same value for all delivery groups that participate in roaming.
    * 
    * @example
    * ID20250101
@@ -578,7 +578,7 @@ export class CreateAppInstanceGroupRequestStoragePolicyUserProfile extends $dara
   remoteStorageType?: string;
   /**
    * @remarks
-   * Specifies whether to enable user data roaming.
+   * The user data roaming switch.
    * 
    * @example
    * false
@@ -738,9 +738,9 @@ export class CreateAppInstanceGroupRequestVideoPolicy extends $dara.Model {
    * @remarks
    * The streaming mode. Used together with the `Webrtc` parameter to specify the protocol type.
    * 
-   * - `Webrtc`=`true` and `StreamingMode`=`video`: WebRTC streaming.
-   * - `Webrtc`=`false` and `StreamingMode`=`video`: video streaming.
-   * - `Webrtc`=`false` and `StreamingMode`=`mix`: mixed streaming.
+   * - `Webrtc`=`true` and `StreamingMode`=`video`: WebRTC stream.
+   * - `Webrtc`=`false` and `StreamingMode`=`video`: video stream.
+   * - `Webrtc`=`false` and `StreamingMode`=`mix`: mixed stream.
    * 
    * @example
    * video
@@ -750,7 +750,7 @@ export class CreateAppInstanceGroupRequestVideoPolicy extends $dara.Model {
    * @remarks
    * Specifies whether to use adaptive resolution.
    * 
-   * - `true`: The session resolution follows the terminal display area. In this case, `SessionResolutionWidth` and `SessionResolutionHeight` specify the maximum resolution values.
+   * - `true`: The session resolution follows the terminal display area. In this case, `SessionResolutionWidth` and `SessionResolutionHeight` are the maximum resolution values.
    * 
    * - `false`: The session resolution does not follow the terminal display area. In this case, the resolution is fixed to the values of `SessionResolutionWidth` and `SessionResolutionHeight`.
    * 
@@ -762,9 +762,9 @@ export class CreateAppInstanceGroupRequestVideoPolicy extends $dara.Model {
    * @remarks
    * Specifies whether to enable WebRTC. Used together with the `StreamingMode` parameter to specify the protocol type.
    * 
-   * - `Webrtc`=`true` and `StreamingMode`=`video`: WebRTC streaming.
-   * - `Webrtc`=`false` and `StreamingMode`=`video`: video streaming.
-   * - `Webrtc`=`false` and `StreamingMode`=`mix`: mixed streaming.
+   * - `Webrtc`=`true` and `StreamingMode`=`video`: WebRTC stream.
+   * - `Webrtc`=`false` and `StreamingMode`=`video`: video stream.
+   * - `Webrtc`=`false` and `StreamingMode`=`mix`: mixed stream.
    * 
    * @example
    * true
@@ -804,7 +804,7 @@ export class CreateAppInstanceGroupRequestVideoPolicy extends $dara.Model {
 export class CreateAppInstanceGroupRequest extends $dara.Model {
   /**
    * @remarks
-   * The application image ID. You can obtain the ID from the **O&M** > **Custom Images** or **System Images** page in the [WUYING Cloud Application console](https://appstreaming.console.aliyun.com/).
+   * The application image ID. You can obtain the ID from the **O&M** > **Custom Images** or **System Images** page in the [WUYING CloudApp console](https://appstreaming.console.aliyun.com/).
    * 
    * This parameter is required.
    * 
@@ -838,7 +838,7 @@ export class CreateAppInstanceGroupRequest extends $dara.Model {
   appPolicyId?: string;
   /**
    * @remarks
-   * The authorization mode of the delivery group.
+   * The delivery group authorization mode.
    * 
    * @example
    * App
@@ -946,7 +946,7 @@ export class CreateAppInstanceGroupRequest extends $dara.Model {
    * @remarks
    * The unit of the subscription duration when `ChargeType` is set to `PrePaid`.
    * 
-   * > This parameter is case-sensitive. For example, `Week` is valid, but `week` is invalid.
+   * > This parameter is case-sensitive. For example, `Week` is valid, but `week` is not.
    * If the request parameters do not match the valid combinations, such as `2 Week`, the API call succeeds but an error occurs during the order placement.
    * 
    * > If `ChargeType` is set to `PostPaid`, set this parameter to `Month`.
@@ -959,7 +959,7 @@ export class CreateAppInstanceGroupRequest extends $dara.Model {
   periodUnit?: string;
   /**
    * @remarks
-   * The pre-opened application ID.
+   * The pre-opened AppId.
    * 
    * @example
    * cag-b2ronxxd****
@@ -977,7 +977,7 @@ export class CreateAppInstanceGroupRequest extends $dara.Model {
   productType?: string;
   /**
    * @remarks
-   * The promotion ID. You can call the [GetResourcePrice](https://help.aliyun.com/document_detail/428503.html) operation to obtain the ID.
+   * The promotion ID. You can obtain the ID by calling the [GetResourcePrice](https://help.aliyun.com/document_detail/428503.html) operation.
    * 
    * @example
    * 17440009****
@@ -995,7 +995,7 @@ export class CreateAppInstanceGroupRequest extends $dara.Model {
   securityPolicy?: CreateAppInstanceGroupRequestSecurityPolicy;
   /**
    * @remarks
-   * The application recycling timeout period, in minutes. After an end user disconnects from a cloud application for a period of time, the cloud application process exits. This period is the application recycling timeout. Set this parameter to `-1` if you do not want the application to be recycled. Valid values: -1 and 3 to 300 (integer). Default value: `15`.
+   * The application recycling time, in minutes. After an end user disconnects from the cloud application for a period of time, the cloud application process exits. This period is the application recycling time. Set this parameter to `-1` if you do not want to recycle the application. Valid values: -1 and 3 to 300 (integer). Default value: `15`.
    * 
    * This parameter is required.
    * 
@@ -1031,7 +1031,7 @@ export class CreateAppInstanceGroupRequest extends $dara.Model {
   userGroupIds?: string[];
   /**
    * @remarks
-   * The user information of the users to be added to the delivery group. This field is required if the `Users` parameter is specified.
+   * The user information to be added to the delivery group as assigned users. This field is required if the `Users` parameter is specified.
    */
   userInfo?: CreateAppInstanceGroupRequestUserInfo;
   /**