@akms/mcp-ssh 0.1.6 → 0.1.8

package/CHANGELOG.md

@@ -0,0 +1,242 @@
+# Changelog
+
+All notable changes to `@akms/mcp-ssh`. Dates are `YYYY-MM-DD`.
+
+## 0.1.8 — 2026-10-19
+
+### Added
+
+- Add **Copy to another client** to each saved entry's config menu. Choose Claude Code,
+  Codex, Claude Desktop or Cursor to copy its name, command, arguments and complete
+  environment without changing the source or switching the current client.
+- Ask before overwriting any same-name destination entry, including another package or
+  HTTP transport. The default is No; Esc returns to the destination picker.
+
+### Fixed
+
+- Validate complete TOML before and after edits. Recognize inline/dotted server names,
+  quoted keys and multiline values; refuse layouts that cannot be edited without
+  changing unrelated settings. Preserve all string environment values when copying.
+- Write JSON and TOML configs through a flushed temporary file and a single rename.
+  Partial writes and failed commits keep the original; concurrent changes observed
+  before committing abort the save. New config files use owner-only permissions.
+- Detect destination names even when the entry cannot be listed as a stdio server.
+  Reject malformed JSON server maps instead of replacing their contents.
+- Replace the complete destination Codex server table when copying, removing stale
+  transport options while keeping unrelated settings. Ordinary edits still preserve
+  hand-written options.
+- Restore the complete previous Claude Code entry if its replacement fails, and report
+  recovery failures accurately. Missing-CLI messages no longer print credentials.
+
+### Documentation
+
+- Document the copy menu, overwrite confirmation and copied fields in the README.
+
+### Verification
+
+- Cover cross-client copying, name conflicts, cancellation, EOF, unreadable destinations,
+  source preservation, TOML replacement and Claude Code CLI rollback.
+- Reproduce multiline-string corruption, missed inline-name collisions, lost env keys,
+  partial disk writes, failed renames and concurrent file changes.
+
+## 0.1.7 — 2026-10-19
+
+### Fixed
+
+- Keep connection check results visible in interactive `config` until Enter is pressed,
+  instead of immediately redrawing the menu and scrolling the report out of view.
+  Esc goes back and Ctrl+C exits; scripted input needs no additional answer.
+
+### Added
+
+- Animate checks in `config` and `--check` with a spinner and elapsed time for each phase:
+  SSH preparation, the jump host or proxy (when configured), and the target handshake and authentication.
+  Completed phases remain visible with success or failure markers and colors.
+- Fit progress lines to the terminal width, use ASCII on legacy Windows consoles, and
+  respect `NO_COLOR`. Redirected output and `TERM=dumb` keep plain reports.
+
+### Documentation
+
+- Include `CHANGELOG.md` in the npm package and document the check display in the README.
+
+### Library API
+
+- `SshConnection.connect(onProgress?)` can report the `transport` and `host` phases of a new connection attempt.
+
+### Verification
+
+- Cover report pauses, cancellation, progress timing and cleanup, narrow terminals, and
+  phase transitions on successful and failed checks.
+
+## 0.1.6 — 2026-10-13
+
+### Fixed
+
+- Never stay behind when the MCP client dies. The first log line written after stdin ends goes to
+  a stderr nobody reads; that EPIPE is now absorbed once and logging stops for good, instead of
+  being logged again (the loop that kept `@akms/mcp-db` 0.1.1 alive at 100% CPU). Shutdown also
+  has a 5 s deadline (`SHUTDOWN_DEADLINE_MS`) after which the process exits regardless.
+- Keep the server running through an uncaught exception or unhandled rejection raised by one
+  session instead of taking every tool of the client down; both are logged.
+
+### Changed
+
+- The `mcp server ready on stdio` log line carries the process `pid`.
+
+### Verification
+
+- Add `tests/cli-shutdown.test.ts`: starts the server through `cmd /c` the way Claude Code does
+  on Windows, completes the handshake, lets the client die, and expects the server gone within 5 s.
+
+## 0.1.5 — 2026-10-13
+
+### Changed
+
+- **Breaking:** Use `akms-mcp-ssh config` as the only configuration command. The former
+  `setup` command now exits with code 1 and a reminder to use `config`.
+- Align CLI help, usage examples and developer documentation with `config`.
+
+### Verification
+
+- Add CLI regression tests for help, `config --target codex`, rejecting `setup`, and
+  the `--check` guidance when no host is configured. Tests use temporary client settings.
+
+## 0.1.4 — 2026-10-13
+
+### Documentation
+
+- Expand the `setup` guide with keyboard controls, Esc behavior, the legacy `config`
+  alias, and reconnecting the MCP client after saving.
+- Document release version synchronization across the package files and `SERVER_VERSION`,
+  plus tests, build, CLI smoke checks and package inspection before publishing.
+- Clarify the test suite's local network requirements and its coverage of form navigation
+  and text editing. Runtime behavior is unchanged.
+
+## 0.1.3 — 2026-10-11
+
+### Changed
+
+- **The host manager is `akms-mcp-ssh setup`.** `config` still opens it, so the name used
+  in 0.1.0 – 0.1.2 keeps working, but it is no longer listed in `--help`.
+
+### Fixed
+
+- **Esc goes back one level everywhere in `setup`.** Inside the settings form, Esc in a
+  choice list (authentication, route, private key), a text field or a secret returns to the
+  form with the setting unchanged — including the follow-up a choice opened, so Esc at the
+  jump-host question also restores the route. Esc at the "Write it?" preview reopens the form
+  on the same values. Before, a list opened from the form ignored Esc, and a text field never
+  saw it: on macOS / Linux the terminal handed the `ESC` byte over as part of the value.
+- Text fields on a terminal are now a small line editor in raw mode (←/→, Home/End,
+  Backspace/Delete, Ctrl+U), which is what makes Esc visible there.
+
+## 0.1.2 — 2026-10-11
+
+### Changed
+
+- **Adding or editing a host opens a settings form** instead of a sequence of questions.
+  Every setting is listed with its value; pick one to change it, in any order, as often as
+  needed. The cursor then moves to the next setting, so Enter down the list still fills the
+  form top to bottom. Settings a choice brings with it (the private key, the jump host) appear
+  under it once chosen, empty required settings are marked, and Save moves to the first
+  missing one. Test the connection and Save sit below the settings; Save offers a test when
+  the values changed since the last one. On a terminal the form redraws in place.
+
+## 0.1.1 — 2026-10-11
+
+### Changed
+
+- **`config` menus are arrow-key lists.** Options are picked with ↑/↓ and Enter instead of
+  typing a keyword (`claude-code`, `password`, a menu letter). The hosts are the main menu:
+  pick one to edit, check, print or remove it. The private key is chosen from the keys found
+  in `~/.ssh`, and the route is one choice (directly / jump host / proxy command / both)
+  instead of two yes/no questions. Answered prompts collapse to one `✔ question · answer`
+  line. Without a terminal (a pipe, Git Bash's mintty) the lists are numbered instead.
+
+## 0.1.0 — 2026-10-11
+
+### Added
+
+- **`akms-mcp-ssh config`** — an interactive manager for the hosts registered in an MCP
+  client's config: list, add, edit, remove, check, print, switch client. It asks plain
+  questions instead of `SSH_*` names, tests the connection, offers to pin the host key, and
+  writes the entry. Targets Claude Code (user scope, through `claude mcp`), Codex
+  (`~/.codex/config.toml`), Claude Desktop and Cursor. `--target <client>` picks one.
+- **Jump host** — `SSH_JUMP_HOST` (with `SSH_JUMP_PORT` / `SSH_JUMP_USER` / `SSH_JUMP_KEY`
+  / `SSH_JUMP_PASSPHRASE` / `SSH_JUMP_PASSWORD` / `SSH_JUMP_HOST_KEY`) connects to a
+  bastion first and reaches the target over a forwarded TCP channel, as `ssh -J` does.
+  User and key default to the target's.
+- **Proxy command** — `SSH_PROXY_COMMAND` runs a command and speaks SSH over its
+  stdin/stdout, as OpenSSH's `ProxyCommand` does; `%h` / `%p` / `%r` expand to the first
+  hop. It carries the jump host when both are set, so "cloudflared to the bastion, then
+  forward to the target" is one entry.
+- A `SSH_JUMP_*` variable set without `SSH_JUMP_HOST` aborts startup, like every other
+  half-formed value.
+- `ssh_list_hosts` shows the route; `--check` prints it along with the jump host's key
+  fingerprint.
+
+### Changed
+
+- `--check` now lets warnings and errors through instead of silencing the log entirely,
+  so a missing key file or the proxy command's stderr (a `cloudflared` login prompt) is
+  visible where the operator is looking. An explicit `SSH_MCP_LOG_LEVEL` still wins.
+
+### Library API
+
+- `SshHostProfile` gains `proxyCommand` and `jump` (`SshJumpProfile`); `SshHostSummary`
+  gains `viaProxyCommand` and `jump`.
+- `SshConnection.jumpHostKeyFingerprint`.
+- `loadHostProfile(env?)` reads from the given record instead of `process.env` when one
+  is passed.
+
+## 0.0.3 — 2026-09-28
+
+- `package.json` declares `repository`, `homepage` and `bugs` pointing at
+  `github.com/alkemic-studio/npm.akms.mcp-ssh`.
+
+## 0.0.2 — 2026-08-09
+
+First release to reach the registry. `0.0.1` was built but never published, so the
+configuration surface listed under **Removed** never actually shipped — it is recorded
+here because the code carried it right up to this version.
+
+### Changed
+
+- **Configuration is environment variables only.** A host is declared with plain `SSH_*`
+  variables in the MCP client's own server entry — one entry per host. "What is this
+  server allowed to do" is now answerable by reading that entry, with no second file to
+  find and no precedence order to reason about.
+- Fronting several hosts means several server entries, each carrying its own connection
+  and its own guard policy, declared where you read it.
+- `--check` reports the one configured host instead of iterating profiles.
+
+### Removed
+
+- Every config-file source: the `--config <path>` flag, `SSH_MCP_CONFIG`,
+  `~/.akms-ssh.json` and `~/.config/akms-ssh/config.json` — along with the `defaults`
+  block, the `hosts` map and the zod schema that validated them.
+- The `target` argument on every tool. With one host there is nothing to select, so the
+  model cannot name a machine even in principle.
+- `ssh_reload_config`. Environment variables are fixed for the life of the process, so
+  applying a change means restarting the server.
+- `privateKey` (inline key contents), `passphraseEnv` and `passwordEnv`. `SSH_KEY` takes a
+  path and `SSH_PASSPHRASE` / `SSH_PASSWORD` are themselves environment variables, so the
+  indirection had nothing left to point at.
+- The protected-local-path rule for `.akms-ssh.json`. The files that define the guards are
+  now the MCP client configurations (`.mcp.json`, `.claude*`,
+  `claude_desktop_config.json`), which stay protected.
+
+### Library API
+
+- `loadConfig(path?)` → `loadHostProfile()`, returning `SshHostProfile | null`.
+- `createSshMcpServer(options?)` → `createSshMcpServer()`. The instance exposes `profile`
+  instead of `config`, and `reloadConfig()` is gone.
+- Dropped the `SshMcpConfig` and `SshMcpServerOptions` types and the `POLICY_INPUT_SCHEMA`
+  / `HOST_INPUT_SCHEMA` / `CONFIG_INPUT_SCHEMA` exports.
+
+### Unchanged
+
+The guards. Catastrophe rules, `SSH_READONLY`, `SSH_ALLOW_SUDO`, `SSH_ALLOW_COMMANDS`,
+`SSH_DENY_PATTERNS` and `SSH_ALLOWED_PATHS` screen exactly what they did before, at the
+same chokepoint inside `SshConnection.exec` and the SFTP operations. A malformed value
+still aborts startup rather than being ignored.