@ai-ecoverse/wasix-ruby 3.4.11-3 → 3.4.11-4

package/lib/ruby/3.4.11/rdoc/parser/ruby_tools.rb

@@ -1,165 +0,0 @@
-# frozen_string_literal: true
-##
-# Collection of methods for writing parsers
-
-module RDoc::Parser::RubyTools
-
-  ##
-  # Adds a token listener +obj+, but you should probably use token_listener
-
-  def add_token_listener(obj)
-    @token_listeners ||= []
-    @token_listeners << obj
-  end
-
-  ##
-  # Fetches the next token from the scanner
-
-  def get_tk
-    tk = nil
-
-    if @tokens.empty? then
-      if @scanner_point >= @scanner.size
-        return nil
-      else
-        tk = @scanner[@scanner_point]
-        @scanner_point += 1
-        @read.push tk[:text]
-      end
-    else
-      @read.push @unget_read.shift
-      tk = @tokens.shift
-    end
-
-    if tk == nil || :on___end__ == tk[:kind]
-      tk = nil
-    end
-
-    return nil unless tk
-
-    # inform any listeners of our shiny new token
-    @token_listeners.each do |obj|
-      obj.add_token(tk)
-    end if @token_listeners
-
-    tk
-  end
-
-  ##
-  # Reads and returns all tokens up to one of +tokens+.  Leaves the matched
-  # token in the token list.
-
-  def get_tk_until(*tokens)
-    read = []
-
-    loop do
-      tk = get_tk
-
-      case tk
-      when *tokens then
-        unget_tk tk
-        break
-      end
-
-      read << tk
-    end
-
-    read
-  end
-
-  ##
-  # Retrieves a String representation of the read tokens
-
-  def get_tkread
-    read = @read.join("")
-    @read = []
-    read
-  end
-
-  ##
-  # Peek equivalent for get_tkread
-
-  def peek_read
-    @read.join('')
-  end
-
-  ##
-  # Peek at the next token, but don't remove it from the stream
-
-  def peek_tk
-    unget_tk(tk = get_tk)
-    tk
-  end
-
-  ##
-  # Removes the token listener +obj+
-
-  def remove_token_listener(obj)
-    @token_listeners.delete(obj)
-  end
-
-  ##
-  # Resets the tools
-
-  def reset
-    @read       = []
-    @tokens     = []
-    @unget_read = []
-    @nest = 0
-    @scanner_point = 0
-  end
-
-  ##
-  # Skips whitespace tokens including newlines
-
-  def skip_tkspace
-    tokens = []
-
-    while (tk = get_tk) and (:on_sp == tk[:kind] or :on_nl == tk[:kind] or :on_ignored_nl == tk[:kind]) do
-      tokens.push(tk)
-    end
-
-    unget_tk(tk)
-    tokens
-  end
-
-  ##
-  # Skips whitespace tokens excluding newlines
-
-  def skip_tkspace_without_nl
-    tokens = []
-
-    while (tk = get_tk) and :on_sp == tk[:kind] do
-      tokens.push(tk)
-    end
-
-    unget_tk(tk)
-    tokens
-  end
-
-  ##
-  # Has +obj+ listen to tokens
-
-  def token_listener(obj)
-    add_token_listener obj
-    yield
-  ensure
-    remove_token_listener obj
-  end
-
-  ##
-  # Returns +tk+ to the scanner
-
-  def unget_tk(tk)
-    @tokens.unshift tk
-    @unget_read.unshift @read.pop
-
-    # Remove this token from any listeners
-    @token_listeners.each do |obj|
-      obj.pop_token
-    end if @token_listeners
-
-    nil
-  end
-
-end

package/lib/ruby/3.4.11/rdoc/parser/simple.rb

@@ -1,61 +0,0 @@
-# frozen_string_literal: true
-##
-# Parse a non-source file. We basically take the whole thing as one big
-# comment.
-
-class RDoc::Parser::Simple < RDoc::Parser
-
-  include RDoc::Parser::Text
-
-  parse_files_matching(//)
-
-  attr_reader :content # :nodoc:
-
-  ##
-  # Prepare to parse a plain file
-
-  def initialize(top_level, content, options, stats)
-    super
-
-    preprocess = RDoc::Markup::PreProcess.new @file_name, @options.rdoc_include
-
-    @content = preprocess.handle @content, @top_level
-  end
-
-  ##
-  # Extract the file contents and attach them to the TopLevel as a comment
-
-  def scan
-    comment = remove_coding_comment @content
-    comment = remove_private_comment comment
-
-    comment = RDoc::Comment.new comment, @top_level
-
-    @top_level.comment = comment
-    @top_level
-  end
-
-  ##
-  # Removes the encoding magic comment from +text+
-
-  def remove_coding_comment(text)
-    text.sub(/\A# .*coding[=:].*$/, '')
-  end
-
-  ##
-  # Removes private comments.
-  #
-  # Unlike RDoc::Comment#remove_private this implementation only looks for two
-  # dashes at the beginning of the line.  Three or more dashes are considered
-  # to be a rule and ignored.
-
-  def remove_private_comment(comment)
-    # Workaround for gsub encoding for Ruby 1.9.2 and earlier
-    empty = ''
-    empty = RDoc::Encoding.change_encoding empty, comment.encoding
-
-    comment = comment.gsub(%r%^--\n.*?^\+\+\n?%m, empty)
-    comment.sub(%r%^--\n.*%m, empty)
-  end
-
-end

package/lib/ruby/3.4.11/rdoc/parser/text.rb

@@ -1,11 +0,0 @@
-# frozen_string_literal: true
-##
-# Indicates this parser is text and doesn't contain code constructs.
-#
-# Include this module in a RDoc::Parser subclass to make it show up as a file,
-# not as part of a class or module.
-#--
-# This is not named File to avoid overriding ::File
-
-module RDoc::Parser::Text
-end

package/lib/ruby/3.4.11/rdoc/parser.rb

@@ -1,297 +0,0 @@
-# -*- coding: us-ascii -*-
-# frozen_string_literal: true
-
-##
-# A parser is simple a class that subclasses RDoc::Parser and implements #scan
-# to fill in an RDoc::TopLevel with parsed data.
-#
-# The initialize method takes an RDoc::TopLevel to fill with parsed content,
-# the name of the file to be parsed, the content of the file, an RDoc::Options
-# object and an RDoc::Stats object to inform the user of parsed items.  The
-# scan method is then called to parse the file and must return the
-# RDoc::TopLevel object.  By calling super these items will be set for you.
-#
-# In order to be used by RDoc the parser needs to register the file extensions
-# it can parse.  Use ::parse_files_matching to register extensions.
-#
-#   require 'rdoc'
-#
-#   class RDoc::Parser::Xyz < RDoc::Parser
-#     parse_files_matching /\.xyz$/
-#
-#     def initialize top_level, file_name, content, options, stats
-#       super
-#
-#       # extra initialization if needed
-#     end
-#
-#     def scan
-#       # parse file and fill in @top_level
-#     end
-#   end
-
-class RDoc::Parser
-
-  @parsers = []
-
-  class << self
-
-    ##
-    # An Array of arrays that maps file extension (or name) regular
-    # expressions to parser classes that will parse matching filenames.
-    #
-    # Use parse_files_matching to register a parser's file extensions.
-
-    attr_reader :parsers
-
-  end
-
-  ##
-  # The name of the file being parsed
-
-  attr_reader :file_name
-
-  ##
-  # Alias an extension to another extension. After this call, files ending
-  # "new_ext" will be parsed using the same parser as "old_ext"
-
-  def self.alias_extension(old_ext, new_ext)
-    old_ext = old_ext.sub(/^\.(.*)/, '\1')
-    new_ext = new_ext.sub(/^\.(.*)/, '\1')
-
-    parser = can_parse_by_name "xxx.#{old_ext}"
-    return false unless parser
-
-    RDoc::Parser.parsers.unshift [/\.#{new_ext}$/, parser]
-
-    true
-  end
-
-  ##
-  # Determines if the file is a "binary" file which basically means it has
-  # content that an RDoc parser shouldn't try to consume.
-
-  def self.binary?(file)
-    return false if file =~ /\.(rdoc|txt)$/
-
-    s = File.read(file, 1024) or return false
-
-    return true if s[0, 2] == Marshal.dump('')[0, 2] or s.index("\x00")
-
-    mode = 'r:utf-8' # default source encoding has been changed to utf-8
-    s.sub!(/\A#!.*\n/, '')     # assume shebang line isn't longer than 1024.
-    encoding = s[/^\s*\#\s*(?:-\*-\s*)?(?:en)?coding:\s*([^\s;]+?)(?:-\*-|[\s;])/, 1]
-    mode = "rb:#{encoding}" if encoding
-    s = File.open(file, mode) {|f| f.gets(nil, 1024)}
-
-    not s.valid_encoding?
-  end
-
-  ##
-  # Checks if +file+ is a zip file in disguise.  Signatures from
-  # http://www.garykessler.net/library/file_sigs.html
-
-  def self.zip?(file)
-    zip_signature = File.read file, 4
-
-    zip_signature == "PK\x03\x04" or
-      zip_signature == "PK\x05\x06" or
-      zip_signature == "PK\x07\x08"
-  rescue
-    false
-  end
-
-  ##
-  # Return a parser that can handle a particular extension
-
-  def self.can_parse(file_name)
-    parser = can_parse_by_name file_name
-
-    # HACK Selenium hides a jar file using a .txt extension
-    return if parser == RDoc::Parser::Simple and zip? file_name
-
-    parser
-  end
-
-  ##
-  # Returns a parser that can handle the extension for +file_name+.  This does
-  # not depend upon the file being readable.
-
-  def self.can_parse_by_name(file_name)
-    _, parser = RDoc::Parser.parsers.find { |regexp,| regexp =~ file_name }
-
-    # The default parser must not parse binary files
-    ext_name = File.extname file_name
-    return parser if ext_name.empty?
-
-    if parser == RDoc::Parser::Simple and ext_name !~ /txt|rdoc/ then
-      case mode = check_modeline(file_name)
-      when nil, 'rdoc' then # continue
-      else
-        RDoc::Parser.parsers.find { |_, p| return p if mode.casecmp?(p.name[/\w+\z/]) }
-        return nil
-      end
-    end
-
-    parser
-  rescue Errno::EACCES
-  end
-
-  ##
-  # Returns the file type from the modeline in +file_name+
-
-  def self.check_modeline(file_name)
-    line = File.open file_name do |io|
-      io.gets
-    end
-
-    /-\*-\s*(.*?\S)\s*-\*-/ =~ line
-
-    return nil unless type = $1
-
-    if /;/ =~ type then
-      return nil unless /(?:\s|\A)mode:\s*([^\s;]+)/i =~ type
-      type = $1
-    end
-
-    return nil if /coding:/i =~ type
-
-    type.downcase
-  rescue ArgumentError
-  rescue Encoding::InvalidByteSequenceError # invalid byte sequence
-
-  end
-
-  ##
-  # Finds and instantiates the correct parser for the given +file_name+ and
-  # +content+.
-
-  def self.for(top_level, content, options, stats)
-    file_name = top_level.absolute_name
-    return if binary? file_name
-
-    parser = use_markup content
-
-    unless parser then
-      parse_name = file_name
-
-      # If no extension, look for shebang
-      if file_name !~ /\.\w+$/ && content =~ %r{\A#!(.+)} then
-        shebang = $1
-        case shebang
-        when %r{env\s+ruby}, %r{/ruby}
-          parse_name = 'dummy.rb'
-        end
-      end
-
-      parser = can_parse parse_name
-    end
-
-    return unless parser
-
-    content = remove_modeline content
-
-    parser.new top_level, content, options, stats
-  rescue SystemCallError
-    nil
-  end
-
-  ##
-  # Record which file types this parser can understand.
-  #
-  # It is ok to call this multiple times.
-
-  def self.parse_files_matching(regexp)
-    RDoc::Parser.parsers.unshift [regexp, self]
-  end
-
-  ##
-  # Removes an emacs-style modeline from the first line of the document
-
-  def self.remove_modeline(content)
-    content.sub(/\A.*-\*-\s*(.*?\S)\s*-\*-.*\r?\n/, '')
-  end
-
-  ##
-  # If there is a <tt>markup: parser_name</tt> comment at the front of the
-  # file, use it to determine the parser.  For example:
-  #
-  #   # markup: rdoc
-  #   # Class comment can go here
-  #
-  #   class C
-  #   end
-  #
-  # The comment should appear as the first line of the +content+.
-  #
-  # If the content contains a shebang or editor modeline the comment may
-  # appear on the second or third line.
-  #
-  # Any comment style may be used to hide the markup comment.
-
-  def self.use_markup(content)
-    markup = content.lines.first(3).grep(/markup:\s+(\w+)/) { $1 }.first
-
-    return unless markup
-
-    # TODO Ruby should be returned only when the filename is correct
-    return RDoc::Parser::Ruby if %w[tomdoc markdown].include? markup
-
-    markup = Regexp.escape markup
-
-    _, selected = RDoc::Parser.parsers.find do |_, parser|
-      /^#{markup}$/i =~ parser.name.sub(/.*:/, '')
-    end
-
-    selected
-  end
-
-  ##
-  # Creates a new Parser storing +top_level+, +file_name+, +content+,
-  # +options+ and +stats+ in instance variables.  In +@preprocess+ an
-  # RDoc::Markup::PreProcess object is created which allows processing of
-  # directives.
-
-  def initialize(top_level, content, options, stats)
-    @top_level = top_level
-    @top_level.parser = self.class
-    @store = @top_level.store
-
-    @file_name = top_level.absolute_name
-    @content = content
-    @options = options
-    @stats = stats
-
-    @preprocess = RDoc::Markup::PreProcess.new @file_name, @options.rdoc_include
-    @preprocess.options = @options
-  end
-
-  autoload :RubyTools, "#{__dir__}/parser/ruby_tools"
-  autoload :Text,      "#{__dir__}/parser/text"
-
-  ##
-  # Normalizes tabs in +body+
-
-  def handle_tab_width(body)
-    if /\t/ =~ body
-      tab_width = @options.tab_width
-      body.split(/\n/).map do |line|
-        1 while line.gsub!(/\t+/) do
-          b, e = $~.offset(0)
-          ' ' * (tab_width * (e-b) - b % tab_width)
-        end
-        line
-      end.join "\n"
-    else
-      body
-    end
-  end
-end
-
-# simple must come first in order to show up last in the parsers list
-require_relative 'parser/simple'
-require_relative 'parser/c'
-require_relative 'parser/changelog'
-require_relative 'parser/markdown'
-require_relative 'parser/rd'
-require_relative 'parser/ruby'

package/lib/ruby/3.4.11/rdoc/rd/.document

@@ -1 +0,0 @@
-inline.rb