@ai-ecoverse/slicc-spectrum 1.84.1 → 1.85.0

package/README.md

@@ -436,7 +436,7 @@ Opens at boot until the agent is ready without failures.
 Background updates stay in the header's update status; new failures reopen the panel, and after a reload into a boot that isn't ready yet such a panel closes once the agent is ready.
 Every automatic close is saved to the layout.
 When the port offers packages, an Optional packages section lists them below as compact rows, each with its state, version, download size, requirements, commands, progress, errors and Install log; packages never count in the header or keep the panel open at boot.
-Packages the user added or pinned with pnpm show up in their own Your packages section below it, with a neutral Pinned light (a hold, not a success) or a positive Added light, their version against seven's, and Unpin or Remove.
+Packages the user added with pnpm in `/opt/user`, or pinned, show up in their own Your packages section below it, under "Packages you added with pnpm in /opt/user. Seven’s updates keep them until you remove them." (plus "Pinned versions stay until you unpin them." while a row offers `unpin`), with a neutral Pinned light (a hold, not a success) or a positive Added light, their version against seven's, and Unpin or Remove.
 Also available through View and the rails.
 
 #### `<slicc-memory>`
@@ -747,8 +747,8 @@ A `failed` row with an installed `from` version reads "Update failed".
 Missing ports preserve existing adapters and report disconnected information in the panel.
 Optional `packages()` returns `PackageItem` rows for optional tools, each with a short catalog `id`, its npm `package` (shown in the name's tooltip and at the top of its Install log), `label`, a one-sentence `description`, the `commands` it provides, `requires` (other package ids, read as "Uses Python" while it's installed, or "Installs Python too" on a row that isn't installed yet; an installed row leaves out a requirement that isn't installed, since its warning says so), optional `notes` (short plain-text lines shown muted under the row, such as "1 untested dependency: …"; leave it out when there's nothing to say), optional `warnings` (lines with an alert icon, `data-warnings`, such as "Needs Python, which isn't installed.
 Install Python again to use it."; the dummy adds that one when a required package is removed), `state` (`available`, `queued`, `installing`, `installed`, `outdated`, `updating`, `removing` or `failed`), the installed `version`, the `offered` version and its `size` in bytes, `progress` counted in packages (or `null` for an indeterminate bar), `error`, `actions` (`install`, `update`, `remove`, `retry`, `unpin`) and an optional `log`.
-A row with `origin: 'user'` (ids such as `user:agent:<name>`) goes into Your packages, `section[data-section="user-packages"]`, which only shows when there is one; its `pin` holds `base` (the version seven ships, or `null` for a package seven doesn't ship), the user's `range` and the `project` folder, such as `/opt/agent`.
-An installed pin reads "Pinned" with `0.24.0 · seven ships 0.25.0 · in /opt/agent` ("the version seven ships" when they match), and an addition reads "Added" with `^1.2.0 → 1.2.4 · in /opt/agent`; `.meta[data-pin]` is `pinned` or `added`.
+A row with `origin: 'user'` (ids such as `user:user:<name>`) goes into Your packages, `section[data-section="user-packages"]`, which only shows when there is one; its `pin` holds `base` (the version seven ships, or `null` for a package seven doesn't ship), the user's `range` and the `project` folder, such as `/opt/user`.
+An installed pin reads "Pinned" with `0.24.0 · seven ships 0.25.0 · in /opt/agent` ("the version seven ships" when they match), and an addition reads "Added" with `^1.2.0 → 1.2.4 · in /opt/user`; `.meta[data-pin]` is `pinned` or `added`.
 A pin that is `removing` reads "Unpinning"; other states keep their usual lights.
 Offer `unpin` for pins and `remove` for additions.
 Emit `packages` whenever they change.
@@ -877,7 +877,9 @@ The guest's model lists only the cone, its `messages()` are the cone's transcrip
 
 Later backed by: BIOS.
 Only on a follower page, a SLICC that shows another SLICC's agent over a link.
-`state()` returns the `FollowState`: `owner` (its display name), `link` (`connecting` for the first connection, `connected`, `reconnecting` after a connection dropped, `unlinked` when the owner unlinked this device, or `failed`), `access` (`{ view, control, terminal }`, what the owner allows this device), an optional `name` (this device's name on the owner, for the waiting page) and an optional `error` (shown when `failed`).
+`state()` returns the `FollowState`: `owner` (its display name), `link` (`connecting` for the first connection, `connected`, `reconnecting` after a connection dropped, `unlinked` when the owner unlinked this device, or `failed`), `access` (`{ view, control, terminal }`, what the owner allows this device), an optional `name` (this device's name on the owner, for the waiting page), an optional `error` (shown when `failed`) and an optional `refused`.
+`refused` is the agent's sentence while the owner's agent won't take this device, such as another agent version; clear it once a follow session connects.
+While it's set and `link` is `connected`, the follow light is neutral and reads "Can’t follow {owner}", its popover shows `refused`, the chat has no watch-only note for it (the embedder shows the warning; an agent port's own `readOnly` sentence still shows), and the page stays read-only with terminals off, even with Control.
 Emit `follow` when it changes.
 Connected without `view` means waiting to be allowed.
 `leave()` forgets the link and the optional `retry()` tries again from `failed`.
@@ -912,7 +914,7 @@ Like bios, `actions()` keeps the latest 500 per tab from the last 24 hours, 5,00
 `createDummyModel({ tabs: 'owner' | 'follower' | 'connecting' | 'stalled' | 'newer' | 'older' | 'alone' | 'off' })` (or `?tabs=` on `/ui/`, off by default) adds a tabs port in that state; `model.tabs.setScenario()` switches it, and Reload connects again and becomes a follower after a short wait.
 `tabsFixtures` and `DummyTabs` are exported from `/dummy`.
 
-`createDummyModel({ follow: 'connecting' | 'waiting' | 'watch' | 'control' | 'full' | 'reconnecting' | 'unlinked' | 'failed' })` (`?follow=` on `/ui/`, which then leaves out the network port and offers only agents, chat, terminal and settings) makes the page a follower of SLICC on quay-studio: connecting, waiting to be allowed, View only, View and Control, everything, reconnecting, unlinked, or failed, where Try again connects with everything allowed.
+`createDummyModel({ follow: 'connecting' | 'waiting' | 'watch' | 'control' | 'full' | 'reconnecting' | 'unlinked' | 'failed' | 'refused' })` (`?follow=` on `/ui/`, which then leaves out the network port and offers only agents, chat, terminal and settings) makes the page a follower of SLICC on quay-studio: connecting, waiting to be allowed, View only, View and Control, everything, reconnecting, unlinked, failed, where Try again connects with everything allowed, or refused, with everything allowed but another agent version.
 Leave counts in `model.follow.left` (the `/ui/` page then drops `?follow=`), and `model.follow.setScenario()` switches it.
 `followFixtures` and `DummyFollow` are exported from `/dummy`.
 `?links=followers` lists quay-studio (a CLI on this computer, Control always allowed), pier-nuc (a remote CLI, prompting), bay-laptop (a follower with everything allowed, watching, a terminal open), reef-phone (View only, watching) and tide-tablet (asking to follow); every links scenario has a follow link.

package/dist/slicc-dummy.js

@@ -477,6 +477,13 @@ function followFixtures(scenario) {
       access: none,
       error: `Couldn\u2019t reach ${owner}. It may be closed or offline.`
     };
+  if (scenario === "refused")
+    return {
+      ...base,
+      link: "connected",
+      access: full,
+      refused: "That SLICC runs another version of the agent, so this tab can\u2019t follow it. Update both SLICCs, then reload this page."
+    };
   return { ...base, link: "connected", access: full };
 }
 var DummyFollow = class extends Emitter {
@@ -6225,7 +6232,7 @@ var userPackages = () => [
     range: "0.24.0"
   }),
   yours(
-    "agent",
+    "user",
     "@harbor/tide-math",
     "Tide tables and harmonic constants.",
     "1.2.4",