@ai-ecoverse/slicc-kernel 1.46.1 → 1.47.0

package/README.md

@@ -187,7 +187,7 @@ On top of preview1 a WASI program gets:
 
 - **Threads**: `wasi.thread-spawn` (wasm32-wasip1-threads) and WASIX `thread_spawn_v2` start a worker per thread on the process's shared memory, sized from the module's own import (a 2 GiB maximum when the engine cannot reserve more). The threads share one descriptor table; `exit` or a trap in any thread ends the process. At most 64 threads per process; `SLICC_WASM_THREADS` sets another cap, up to 256.
 - **WASIX** (a module importing `wasix_32v1`): fork and setjmp/longjmp through Asyncify (the module is built with `wasm-opt --asyncify`), exec, `posix_spawn`, `waitpid`, pipes, `dup2`, signal handlers and interval timers, terminal modes, and dynamic linking: a position-independent main module loads side modules with `dlopen` from `LD_LIBRARY_PATH`, its runtime path, `/lib`, `/usr/lib` and `/usr/local/lib`.
-- **Job control:** `^Z`, `SIGTSTP`, `SIGTTIN` and `SIGTTOU` stop a WASIX program at once, unless it has a handler for them. A stopped program that is busy computing is stopped for job control (`jobs` shows it, `fg`, `bg` and `SIGCONT` work), but its worker keeps a core busy until its next system call, since a worker's running code cannot be frozen from outside. Agents should `kill` such a job rather than leave it stopped.
+- **Job control:** `^Z`, `SIGTSTP`, `SIGTTIN` and `SIGTTOU` stop a WASIX program at once, unless it has a handler for them. A stopped program that is busy computing is stopped for job control (`jobs` shows it, `fg`, `bg` and `SIGCONT` work), but its worker keeps a core busy until its next system call, since a worker's running code cannot be frozen from outside. Agents should `kill` such a job rather than leave it stopped. For the same reason, a signal with a handler or a terminating default (`^C`, `SIGTERM`) reaches a program that is busy computing only at its next system call, so a CPU-bound loop may not end on `^C`; `kill -9` always ends it. A thread blocked in the kernel or waiting on a lock (`pthread_cond_wait`, a futex) is woken by a signal for it (a futex wait checks for signals every 50 ms, so each waiting thread wakes briefly that often), and `pthread_kill` runs the handler on the thread it names.
 - **Sockets**: the WASIX socket calls (`sock_open`, `sock_pair` for an `AF_UNIX` stream pair, `bind`, `listen`, `connect`, `accept`, options, local and peer names) are the kernel's loopback sockets, and preview1's `sock_recv` / `sock_send` / `sock_shutdown` work on them and on inherited ones. Writing to a socket whose peer is gone fails with `EPIPE`, through `fd_write` as through `sock_send`, as if `MSG_NOSIGNAL` were set, since a WASI program cannot ignore `SIGPIPE`; a pipe or terminal whose reader is gone still ends the program with status 141. HTTP and HTTPS leave through the realm proxy that `https_proxy` names, as for any other program; `resolve` answers `/etc/hosts` names and literal addresses, and the [uplink](#uplink)'s names.
 - **Diagnostics**: a trap ends the program with 134 and its message on stderr; with `SLICC_WASM_BACKTRACE=1` the wasm frames follow, named from the module's name section, or from a sidecar for a module shipped without one (`<module>.names` beside it, or the same path in a `<package>-names` package). `SLICC_WASI_STATS=1` makes a program print its calls, counted and timed, as it ends.
 
@@ -226,6 +226,7 @@ The module's default export (or its `main` export) is called with a context and
 - `net`: `listen({ port, host, backlog })` and `connect({ host, port, signal })` (`host` defaults to `127.0.0.1`) on the kernel's loopback, the same sockets WASIX programs use, so a JS server is reached by other processes, by the page as `<port>.kernel.localhost` (`loopbackFetch`, `dial`) and by attached clients. A listener has its `port` (as bound, so port `0` picks a free one), `accept({ signal })`, `close()` and `for await` over its connections. A connection has `local` and `remote` addresses, `readable` and `writable` web streams (closing the writable shuts down the sending side, so the peer reads the end), and `close()`. The loopback is IPv4 (`127.0.0.1` by default, or `0.0.0.0`), so an IPv6 host such as `::1` fails with `EADDRNOTAVAIL` for both `listen` and `connect`, and binding and connecting fail as they would for a WASIX program (`EADDRINUSE`, `ECONNREFUSED`, `EADDRNOTAVAIL`). A blocked accept, read or write waits without holding anything in the kernel, so aborting it or closing the socket leaves nothing behind. A write to a connection the peer closed fails with `EPIPE` and no `SIGPIPE`;
 - `websocket(url, { protocols, headers, signal })`, a WebSocket over the kernel's transport (its `websocket`, so `fetchTransport({ webSocket: true })` in a browser), shaped like `WebSocketStream`. It resolves once the socket is open, with `url`, the `protocol` the far end chose (always one the program offered: a transport that hands back a socket with another fails the open with `EPROTO`, while browsers and Node's `WebSocket`, which `fetchTransport()` uses, fail such a handshake themselves without saying why, so the open fails with `ECONNREFUSED`), a `readable` of messages (`string` for text, `Uint8Array` for binary), a `writable` for sending them, `closed` (the `{ code, reason }` of the close, from either side, whether or not the program reads) and `close({ code, reason })`. An `http(s):` URL is taken as `ws(s):`. Sending waits while more than 1 MiB is buffered. A signal aborts the open, and after it the socket. A transport without WebSockets rejects with a `TypeError` whose `cause.code` is `ENOTSUP`, and one that cannot connect with `ECONNREFUSED`;
 - `fetch(input, init)`, the web's `fetch` over the kernel's transport, the one the proxy uses, so the embedder's transport, its WebSocket and proxy settings and the kernel's routes apply. The response body streams as the program reads it. The request body is read whole first, since a transport takes it whole (streaming it is [#238](https://github.com/ai-ecoverse/slicc-kernel/issues/238)), and one larger than the transport's `maxRequestBody` is answered `413`, as through the proxy. A signal aborts the request at any stage. Redirects follow the fetch rules: at most 20, a 301 or 302 after a `POST` and a 303 turn into a `GET` without a body, `Authorization` is dropped across origins, and `redirect: 'manual'` returns the redirect itself. On a transport that follows redirects on its own (`fetchTransport()` in a browser) only `'follow'` works: `'manual'` and `'error'` reject with a `TypeError` whose `cause.code` is `ENOTSUP`, since such a transport never shows the program a redirect. A status the transport chose comes back as a response whose body is the reason. An unreachable host, or no transport at all, rejects with a `TypeError` whose `cause.code` is `ECONNREFUSED` or `ENETUNREACH`, as Node's `fetch` does. The global `fetch` stays withheld;
+- `tty`, for programs on a terminal: `getAttr(fd)` and `setAttr(fd, termios)` read and set its termios (`{ c_iflag, c_oflag, c_cflag, c_lflag, c_cc }`, Linux values), `setRaw(fd, raw)` switches raw mode on as libuv (and Node's `setRawMode`) does (no echo, no line editing, no `^C` signal, each key read as it comes) and off again to the termios it had before, `size(fd)` answers `{ columns, rows }`, and `foreground(fd)` and `setForeground(fd, pgrp)` get and set the foreground process group, under the same job-control rules as other programs. A window resize arrives as `SIGWINCH` through `signals`. A terminal the program left raw is set back when the program ends, whether it returns, exits or throws (a program killed by a signal cannot do so). On a descriptor that is not a terminal, each call fails with `ENOTTY`;
 - `exit(status)`, which ends the program once its pending writes are done.
 
 A program that throws, or leaves an error or a rejected promise unhandled, ends with status 1 and the message on stderr; one whose module cannot be loaded, or exports no function, ends with 126. A write to a pipe whose reader is gone ends the program with 141, unless it ignores or catches `SIGPIPE` (an ignore inherited from its parent counts), in which case the write fails with `EPIPE`. Errors carry a POSIX `code`. Reads and writes of pipes, terminals and sockets go through the kernel's asynchronous operations, so a program blocked reading stdin can still write and handle signals; other calls of one process are made one at a time. A JS program cannot `fork`, and threads it starts itself are not the kernel's.