@agi-fans/dsh-tui 0.22.0 → 0.23.0

package/lib/locale/zh.d.ts

@@ -0,0 +1,1114 @@
+/** Simplified Chinese for terminal-owned interface text. */
+export declare const zh: {
+    readonly "Profile \u00B7 1 pending change \u00B7 Apply to save": "Profile · 1 项待保存修改 · 应用后保存";
+    readonly "Shell output queued for the next model step.": "Shell 输出已排队，将在模型下一步处理。";
+    readonly "Share Shell output": "分享 Shell 输出";
+    readonly "Sharing failed. Retry sends the captured output to the conversation.": "分享失败，重试会将已捕获的输出发送到会话。";
+    readonly "Retry sharing": "重试分享";
+    readonly "Keep output in terminal": "保留终端输出";
+    readonly "This session cannot receive shared output.": "当前会话无法接收分享的输出。";
+    readonly "Profile \u00B7 Saves immediately \u00B7 Applies now": "Profile · 立即保存并生效";
+    readonly "Profile \u00B7 Saves immediately \u00B7 Next turn": "Profile · 立即保存，下轮生效";
+    readonly "Profile \u00B7 Saves immediately \u00B7 Next launch": "Profile · 立即保存，下次启动生效";
+    readonly "Profile \u00B7 Saves immediately": "Profile · 立即保存";
+    readonly "Profile \u00B7 Applies after reload or restart": "Profile · 重新加载或重启后生效";
+    readonly "Profile \u00B7 Saves immediately \u00B7 New sessions": "Profile · 立即保存，用于新会话";
+    readonly "Profile \u00B7 Apply to save": "Profile · 应用后保存";
+    readonly "Profile \u00B7 Read only": "Profile · 只读";
+    readonly "Profile \u00B7 Saves on confirmation": "Profile · 确认后保存";
+    readonly "Current session \u00B7 Applies now": "当前会话 · 立即生效";
+    readonly "Current session \u00B7 Before the first prompt": "当前会话 · 首次提问前设置";
+    readonly "Session + Profile \u00B7 Choose scope in Model": "会话 + Profile · 在模型列表选择范围";
+    readonly "Open to configure": "打开后配置";
+    readonly "Profile \u00B7 No pending changes": "Profile · 暂无待保存修改";
+    readonly "Profile \u00B7 {count} pending changes \u00B7 Apply to save": "Profile · {count} 项待保存修改 · 应用后保存";
+    readonly "DeepSeek rejected this API key. Copy a valid key from the DeepSeek dashboard and try again.": "DeepSeek 拒绝了此 API 密钥，请从 DeepSeek 控制台复制有效密钥后重试。";
+    readonly "Could not reach DeepSeek to validate the API key. Check your network and try again.": "无法连接 DeepSeek 验证 API 密钥，请检查网络后重试。";
+    readonly "The API key is valid, but it could not be saved to the Harness credential store.": "API 密钥有效，但未能保存到 Harness 凭据存储。";
+    readonly "Enter another key": "输入其他密钥";
+    readonly "Retry validation": "重试验证";
+    readonly "Retry saving": "重试保存";
+    readonly "Could not validate the key": "密钥验证失败";
+    readonly "Could not save the key": "密钥保存失败";
+    readonly "Configuration changed. Load the latest settings to continue with your draft.": "配置已发生变化，请加载最新配置后继续编辑草稿。";
+    readonly "Latest settings loaded. Your remaining changes are ready to apply.": "已加载最新配置，你的其余修改可继续应用。";
+    readonly "Load latest and keep draft": "加载最新配置并保留草稿";
+    readonly "Use latest value": "使用最新值";
+    readonly "Keep my change": "保留我的修改";
+    readonly "Choose which value to keep in the draft. Apply saves the result.": "选择要保留在草稿中的值，点击应用后保存。";
+    readonly "Setting changed elsewhere": "此设置已在其他地方修改";
+    readonly "Session model": "会话模型";
+    readonly "Default model was not saved.": "默认模型尚未保存。";
+    readonly "Keep for this session": "仅在当前会话使用";
+    readonly "Retry saving default": "重试保存默认模型";
+    readonly "The session model changed, but the default could not be saved": "当前会话已切换模型，但默认模型保存失败";
+    readonly "Invalid value.": "输入值无效。";
+    readonly "Enter at least one model id.": "请至少输入一个模型 ID。";
+    readonly "Base URL must be an http or https URL.": "基础地址必须使用 http 或 https。";
+    readonly "Base URL must be an absolute http or https URL.": "基础地址必须是完整的 http 或 https URL。";
+    readonly "Choose a different provider id.": "请选择其他提供商 ID。";
+    readonly "Provider id must start with a letter and use only lowercase letters, digits, and hyphens.": "提供商 ID 必须以字母开头，且只能包含小写字母、数字和连字符。";
+    readonly "No approval rules for this session or workspace.": "此会话或工作区暂无审批规则。";
+    readonly "Approval rule revoked.": "已撤销审批规则。";
+    readonly retry: "重试";
+    readonly "{name} is a catalog provider. Choose it from the provider list.": "{name} 已在目录中，请从提供商列表选择。";
+    readonly "Could not fetch models. Try again or enter model ids.": "无法获取模型，请重试或手动输入模型 ID。";
+    readonly "No models were returned. Try again or enter model ids.": "未返回模型，请重试或手动输入模型 ID。";
+    readonly "Could not complete the action. Try again or copy the path.": "操作失败，请重试或复制路径。";
+    readonly "Path copied.": "已复制路径。";
+    readonly "File opened.": "已打开文件。";
+    readonly "load more": "加载更多";
+    readonly "Showing {loaded} of {total} plugins": "已显示 {loaded} / {total} 个插件";
+    readonly "Loading cancelled. Refresh to try again.": "已取消加载，可刷新重试。";
+    readonly "Esc returns to the results.": "按 Esc 返回结果列表。";
+    readonly "Loading plugins\u2026": "正在加载插件…";
+    readonly Incompatible: "不兼容";
+    readonly "No matching plugins.": "没有匹配的插件。";
+    readonly "Bundled runtime \u00B7 {name}": "内置运行环境 · {name}";
+    readonly "Model and sign-in follow native settings. Subagent permissions are configured separately.": "模型和登录使用原生设置，子代理权限单独配置。";
+    readonly "Usage notes": "使用说明";
+    readonly Installation: "安装";
+    readonly Item: "项目";
+    readonly State: "状态";
+    readonly Package: "软件包";
+    readonly Version: "版本";
+    readonly Profile: "配置档案";
+    readonly Unknown: "未知";
+    readonly Components: "组件";
+    readonly Component: "组件";
+    readonly loading: "加载中";
+    readonly unloading: "卸载中";
+    readonly "Declared in profile, files unavailable": "已在配置档案中声明，文件不可用";
+    readonly "Not installed": "未安装";
+    readonly "Included with omdsh": "随 omdsh 提供";
+    readonly "Installed in profile": "已安装到配置档案";
+    readonly "No component entries are registered.": "暂无已注册的组件条目。";
+    readonly "Runtime and sign-in": "运行与登录";
+    readonly "Not checked. Runtime startup and sign-in require a real delegated task to verify.": "尚未检查。运行环境启动与登录状态需通过真实委派任务验证。";
+    readonly "This integration is no longer registered in this profile.": "此集成已从当前配置档案中移除。";
+    readonly "Could not load installation status. Use Refresh to try again.": "无法加载安装状态，请刷新重试。";
+    readonly "Could not refresh installation status. Showing the last loaded state.": "无法刷新安装状态，当前显示上次加载的结果。";
+    readonly "Load error. Open Installation status for details.": "加载出错，请打开安装状态查看详情。";
+    readonly "Choose an entry to inspect": "选择条目查看详情";
+    readonly Module: "模块";
+    readonly Status: "状态";
+    readonly "Load state": "加载状态";
+    readonly "Not mounted": "未挂载";
+    readonly "Read-only": "只读";
+    readonly "Required by the terminal.": "终端运行所必需。";
+    readonly Diagnostic: "诊断信息";
+    readonly "Copy details": "复制详情";
+    readonly "File already exists. Choose another export path.": "文件已存在，请选择其他导出路径。";
+    readonly "Could not save the file. Check the destination and try again.": "无法保存文件，请检查保存位置后重试。";
+    readonly read: "阅读";
+    readonly "Open file": "打开文件";
+    readonly "Copy path": "复制路径";
+    readonly Export: "导出";
+    readonly "Search tools \u00B7 Enter reads the full description": "搜索工具 · Enter 查看完整说明";
+    readonly "No tools match this search.": "没有匹配的工具。";
+    readonly "No tools are available to this session.": "此会话暂无可用工具。";
+    readonly "Choose a format": "选择导出格式";
+    readonly "Conversation as editable text": "将对话导出为可编辑文本";
+    readonly "Conversation for viewing in a browser": "在浏览器中查看对话";
+    readonly "Session archive": "会话归档";
+    readonly "Session logs, descendants and original attachments": "会话日志、子会话和原始附件";
+    readonly "Save to file": "保存到文件";
+    readonly "Export complete": "导出完成";
+    readonly "Export path": "导出路径";
+    readonly "Favorite models": "收藏的模型";
+    readonly "Enter switches this session only": "Enter 仅切换当前会话的模型";
+    readonly "Enter switches and saves the default model": "Enter 切换模型并保存为默认值";
+    readonly "No matching models. Alt+A switches between all models and favorites.": "没有匹配的模型。Alt+A 切换全部模型与收藏。";
+    readonly "Favorite/unfavorite": "收藏／取消收藏";
+    readonly "All models": "全部模型";
+    readonly Favorites: "收藏";
+    readonly "Inspect context usage and session details": "查看上下文用量与会话详情";
+    readonly "Copy session ID": "复制会话 ID";
+    readonly "Projected next request": "下一次请求的预计用量";
+    readonly "Context usage is not available yet.": "尚无上下文用量数据。";
+    readonly "{tokens} tokens remaining": "剩余 {tokens} tokens";
+    readonly "Estimated composition": "分类估算";
+    readonly "Estimates use a separate token count.": "分类估算与总占用采用不同计数方式。";
+    readonly "System prompt": "系统提示";
+    readonly "Tool schemas": "工具定义";
+    readonly "Conversation messages": "会话消息";
+    readonly "{turns} turns \u00B7 {steps} steps": "{turns} 回合 · {steps} 步";
+    readonly "Input {input} \u00B7 Output {output}": "输入 {input} · 输出 {output}";
+    readonly Details: "详情";
+    readonly Compact: "压缩上下文";
+    readonly unavailable: "暂无数据";
+    readonly "Keyboard shortcuts": "键盘快捷键";
+    readonly "Browse essential keys and shortcuts by section": "查看常用操作，按章节查找快捷键";
+    readonly Help: "帮助";
+    readonly Changelog: "更新日志";
+    readonly "Find a command \u00B7 Enter inserts it into the composer": "查找命令 · Enter 填入输入框";
+    readonly "Choose a release": "选择版本";
+    readonly "Choose a section": "选择章节";
+    readonly "Choose content": "选择内容";
+    readonly "All sections": "全部章节";
+    readonly "This page": "当前页";
+    readonly sections: "章节";
+    readonly shortcuts: "快捷键";
+    readonly copy: "复制";
+    readonly Copy: "复制";
+    readonly Quote: "引用";
+    readonly "Copy source": "复制源码";
+    readonly "Quote source": "引用源码";
+    readonly "Copied selection": "已复制选区";
+    readonly "Selection sent to terminal clipboard": "已将选区发送到终端剪贴板";
+    readonly "Quoted in composer": "已引用到输入框";
+    readonly "Test keys": "测试按键";
+    readonly "Key test": "按键测试";
+    readonly "See what the terminal sends without running an action.": "查看终端实际发送的按键，不执行操作。";
+    readonly "Press a key. Esc or Ctrl+C returns without changing bindings.": "请按键测试。Esc 或 Ctrl+C 返回，不会更改绑定。";
+    readonly "If nothing appears, the terminal or operating system may have intercepted the key.": "若没有变化，该按键可能被终端或操作系统拦截。";
+    readonly "Paste received. Paste is text input, not a shortcut.": "收到粘贴内容。粘贴属于文本输入，不是快捷键。";
+    readonly "Text received: {text}": "收到文本：{text}";
+    readonly "No shortcut received. Option/Alt may be producing text; use another binding or configure the terminal\u2019s Option/Alt behavior.": "未收到快捷键。Option/Alt 可能在输入文字；可换一个绑定，或调整终端的 Option/Alt 设置。";
+    readonly "Key received: {key}": "收到按键：{key}";
+    readonly "This key sequence is not supported. Try a different key.": "暂不支持此按键序列，请尝试其他按键。";
+    readonly "Recognized key. No application action is assigned; an editor or open panel may still use it.": "已识别按键，未绑定应用操作；编辑器或当前面板仍可能使用它。";
+    readonly "Assigned action: {action}": "已绑定操作：{action}";
+    readonly "Copy failed": "复制失败";
+    readonly "Process \u00B7 \u2191\u2193 select \u00B7 Enter toggle \u00B7 {key} actions \u00B7 Home title \u00B7 Esc return": "过程 · ↑↓ 选择 · Enter 展开/收起 · {key} 操作 · Home 标题 · Esc 返回";
+    readonly "Selection \u00B7 Enter copy \u00B7 {key} quote \u00B7 Esc cancel": "选区 · Enter 复制 · {key} 引用 · Esc 取消";
+    readonly "Tool actions": "工具操作";
+    readonly "Copy command": "复制命令";
+    readonly "Copy result": "复制结果";
+    readonly "View file": "查看文件";
+    readonly "Copy or open the current tool\u2019s content": "复制或打开当前工具的内容";
+    readonly "Quote selected text in the composer": "将选中文字引用到输入框";
+    readonly "No tool selected \u00B7 use {key}": "未选中工具 · 使用 {key}";
+    readonly "No content available for this tool.": "此工具暂无可操作的内容。";
+    readonly "Search matches \u00B7 current contents": "搜索命中 · 当前内容";
+    readonly Skill: "技能";
+    readonly "User only": "仅用户调用";
+    readonly "Type `/` and a skill name to find and invoke it. User only skills require an explicit request.": "输入 `/` 和技能名可查找并调用技能。标为“仅用户调用”的技能需要你主动请求。";
+    readonly "Current goal": "当前目标";
+    readonly "Manage the current goal": "管理当前目标";
+    readonly "Manage this session\u2019s goal": "管理本会话的目标";
+    readonly "Edit, pause, resume or clear this session\u2019s goal.": "编辑、暂停、继续或清除本会话的目标。";
+    readonly "Goal controls are unavailable in this profile.": "当前配置无法提供目标管理。";
+    readonly "No current goal. Use /goal <objective> to create one.": "没有当前目标，可用 /goal <目标> 创建。";
+    readonly "Automatic continuation enabled": "已启用自动继续";
+    readonly "Waiting for your instruction to continue": "等待你确认继续";
+    readonly "Goal paused": "目标已暂停";
+    readonly "Goal blocked": "目标受阻";
+    readonly Rounds: "轮数";
+    readonly "The round limit is reached. Ask the agent to raise the limit before resuming.": "已达到轮数上限，请先让代理提高上限再继续。";
+    readonly "Resume goal": "继续目标";
+    readonly "Pause goal": "暂停目标";
+    readonly "Edit objective": "编辑目标内容";
+    readonly "Clear goal": "清除目标";
+    readonly "Clear this goal?": "清除这个目标？";
+    readonly "Keep goal": "保留目标";
+    readonly "What should this goal achieve?": "这个目标要完成什么？";
+    readonly "Could not refresh jobs. Showing the last loaded state.": "无法刷新后台任务，当前显示上次加载的状态。";
+    readonly "This job is no longer available.": "此后台任务已不可用。";
+    readonly "Stop job": "停止任务";
+    readonly "Stop this background job?": "停止这个后台任务？";
+    readonly "Keep running": "继续运行";
+    readonly "Earlier output is no longer retained.": "更早的输出已不再保留。";
+    readonly "Showing the latest output; earlier text is omitted from this view.": "当前显示最新输出；本视图已省略更早的文本。";
+    readonly "No retained output for this job.": "此任务没有保留的输出。";
+    readonly "Output observation stopped:": "输出查看已停止：";
+    readonly "Job output": "任务输出";
+    readonly "View output": "查看输出";
+    readonly "Background job": "后台任务";
+    readonly "Background jobs": "后台任务";
+    readonly "Select a job to inspect output or stop it.": "选择任务，查看输出或停止执行。";
+    readonly "No background jobs in this session.": "本会话没有后台任务。";
+    readonly running: "运行中";
+    readonly stopping: "正在停止";
+    readonly completed: "已完成";
+    readonly stopped: "已停止";
+    readonly "Inspect MCP registration, tools and recent calls": "查看 MCP 注册信息、工具和最近调用";
+    readonly "MCP diagnostics": "MCP 诊断";
+    readonly "Inspect registration, available tools and recent calls": "查看注册信息、可用工具和最近调用";
+    readonly "Plugin registration and tool availability do not verify transport health or authentication.": "插件注册和工具可用性不代表连接正常或认证已通过。";
+    readonly "Live connection and authentication status are unavailable in this Harness version.": "当前 Harness 版本无法提供实时连接和认证状态。";
+    readonly "Configure project servers in `.dsh/mcp.json` or home servers in `$OMDSH_HOME/mcp.json` (default `~/.dsh/mcp.json`), then restart omdsh.": "在 `.dsh/mcp.json` 中配置项目服务器，或在 `$OMDSH_HOME/mcp.json`（默认 `~/.dsh/mcp.json`）中配置用户服务器，然后重启 omdsh。";
+    readonly "Could not refresh MCP diagnostics. Showing the last loaded state; use Refresh to try again.": "无法刷新 MCP 诊断，当前显示上次加载的状态；请刷新重试。";
+    readonly "Could not load MCP diagnostics. Use Refresh to try again.": "无法加载 MCP 诊断，请刷新重试。";
+    readonly "Plugin registration": "插件注册";
+    readonly "Registration status is unavailable in this host.": "当前宿主无法提供注册状态。";
+    readonly "No MCP client entries are registered.": "没有已注册的 MCP 客户端条目。";
+    readonly "Recent calls in this session": "本会话的最近调用";
+    readonly "Recorded outcomes are historical; an error may come from the tool rather than the connection.": "此处为历史调用结果；错误可能来自工具本身，不一定是连接故障。";
+    readonly "No MCP calls recorded in this session.": "本会话尚无 MCP 调用记录。";
+    readonly "Available tools": "可用工具";
+    readonly "Manage plugin configuration in /settings or /plugins.": "在 /settings 或 /plugins 中管理插件配置。";
+    readonly "No result recorded": "尚无结果记录";
+    readonly "Returned an error": "返回错误";
+    readonly "No MCP tools are available to this session. This does not establish whether a server is connected.": "本会话没有可用的 MCP 工具，无法据此判断服务器是否已连接。";
+    readonly "MCP tools \u00B7 Servers: {servers} \u00B7 Tools: {tools}": "MCP 工具 · 服务器：{servers} · 工具：{tools}";
+    readonly "Tools: {count}": "工具：{count}";
+    readonly Tool: "工具";
+    readonly Description: "说明";
+    readonly "No description provided.": "未提供说明。";
+    readonly "not mounted": "未挂载";
+    readonly active: "已激活";
+    readonly failed: "失败";
+    readonly pending: "等待中";
+    readonly disposed: "已释放";
+    readonly "Alt+R continue": "Alt+R 继续";
+    readonly "Continue a failed generation with an empty composer": "输入框为空时继续失败的生成";
+    readonly "Continue an eligible failed generation without resending the prompt": "继续可恢复的失败生成，不重复发送提示";
+    readonly "Resend the last human prompt with its attachments": "重发最近一条用户提示及其附件";
+    readonly "Re-sent the last human prompt with its attachments as a new turn.": "已将最近一条用户提示及其附件作为新回合重发。";
+    readonly "No human prompt is available to retry.": "没有可重发的用户提示。";
+    readonly "Usage: /continue": "用法：/continue";
+    readonly "Usage: /retry": "用法：/retry";
+    readonly "The continuation belongs to another session.": "这次续跑操作属于另一个会话。";
+    readonly "Return to the parent session to continue or resend a prompt.": "请返回主会话后再继续生成或重发提示。";
+    readonly "Wait for the current work to finish before continuing or resending.": "请等待当前任务结束后再继续生成或重发提示。";
+    readonly "Resolve pending input in /queue before continuing or resending.": "请先在 /queue 处理待发送的输入，再继续生成或重发提示。";
+    readonly "Answer the pending question or approval before continuing or resending.": "请先回答问题或完成审批，再继续生成或重发提示。";
+    readonly "No recoverable model failure is available to continue. Use /retry to resend the last prompt.": "没有可继续的模型失败。若要重发最近一条提示，请使用 /retry。";
+    readonly "Describe your task to generate a plan": "描述任务以生成计划";
+    readonly "Approve this plan and leave plan mode?": "批准此计划并退出计划模式？";
+    readonly Approve: "批准";
+    readonly "Keep planning": "继续规划";
+    readonly "Leave plan mode; the plan is carried out from the next step.": "退出计划模式，从下一步开始执行计划。";
+    readonly "Stay in plan mode; feedback goes back to the model.": "保持计划模式，将反馈交给模型修改计划。";
+    readonly "Revision feedback \u00B7 optional": "修改意见 · 可选";
+    readonly "What should the revised plan change?": "计划需要修改哪些内容？";
+    readonly "Continue without feedback": "不附加意见，继续规划";
+    readonly "ended \u00B7 was {time}": "已结束 · 原定 {time}";
+    readonly "due now": "已到时间";
+    readonly "in {duration}": "{duration} 后";
+    readonly "next {time}": "下次 {time}";
+    readonly "next {relative} \u00B7 {time}": "下次 {relative} · {time}";
+    readonly "paused \u00B7 {next}": "已暂停 · {next}";
+    readonly "once, {seconds}s after creation": "创建 {seconds} 秒后执行一次";
+    readonly "once at {time}": "在 {time} 执行一次";
+    readonly "every {seconds}s": "每 {seconds} 秒";
+    readonly "daily {time} {zone}": "每天 {time} {zone}";
+    readonly "weekly {days} {time} {zone}": "每周 {days} {time} {zone}";
+    readonly "This task is queued or running. Manage its execution in the destination conversation.": "此任务已排队或正在执行，请在目标会话中管理执行。";
+    readonly "The destination conversation is archived. Restore it before running this task.": "目标会话已归档，请先恢复会话再运行任务。";
+    readonly "Run now is available after {time}.": "{time} 后可以再次立即运行。";
+    readonly "Could not refresh scheduled tasks. Showing the last loaded state; refresh before making changes.": "无法刷新定时任务，当前显示上次加载的状态；请刷新成功后再修改。";
+    readonly "View delivery history": "查看投递记录";
+    readonly "Pause reminder": "暂停提醒";
+    readonly "Resume reminder": "恢复提醒";
+    readonly "Run now": "立即运行";
+    readonly "Deliver the instruction now without moving the scheduled occurrence.": "立即投递指令，不改变原定的执行时间。";
+    readonly "Edit name": "修改名称";
+    readonly "Edit instruction": "修改指令";
+    readonly "Delete reminder": "删除提醒";
+    readonly "Scheduled task": "定时任务";
+    readonly "Manage this reminder": "管理此提醒";
+    readonly "The task is already queued, running, or waiting for its minimum run interval.": "此任务已排队、正在执行，或尚未达到最短运行间隔。";
+    readonly "Instruction delivered. This does not mean model execution has completed.": "指令已投递，不表示模型已执行完成。";
+    readonly "Delete \u201C{title}\u201D and its saved delivery records?": "删除“{title}”及其保存的投递记录？";
+    readonly "Sessions and messages already delivered are retained.": "保留会话和已经投递的消息。";
+    readonly "Keep reminder": "保留提醒";
+    readonly "Reminder name": "提醒名称";
+    readonly "Reminder instruction": "提醒指令";
+    readonly "Rename this reminder": "修改此提醒的名称";
+    readonly "What should the reminder say?": "提醒应发送什么指令？";
+    readonly "The reminder changed elsewhere. Review its current state and retry.": "此提醒已在别处修改，请检查当前状态后重试。";
+    readonly "Deleted reminder \u201C{title}\u201D.": "已删除提醒“{title}”。";
+    readonly "Reminder paused.": "提醒已暂停。";
+    readonly "Reminder resumed.": "提醒已恢复。";
+    readonly "Reminder updated.": "提醒已更新。";
+    readonly "Could not complete the task action: {error}": "任务操作未完成：{error}";
+    readonly "Queued or running": "已排队或执行中";
+    readonly Active: "有效";
+    readonly Paused: "已暂停";
+    readonly Ended: "已结束";
+    readonly "Could not load scheduled tasks. Refresh to retry.": "无法加载定时任务，请刷新重试。";
+    readonly "Scheduled tasks": "定时任务";
+    readonly "Reminders involving this session": "与本会话相关的提醒";
+    readonly "No scheduled tasks in this session. Ask the agent to create one with `schedule_create`.": "本会话暂无定时任务，可以让代理通过 schedule_create 创建。";
+    readonly "Manage scheduled reminders and delivery history": "管理定时提醒与投递记录";
+    readonly "Scheduled task action cancelled.": "已取消定时任务操作。";
+    readonly "This reminder no longer exists.": "此提醒已不存在。";
+    readonly "Delivery history changed. Refresh to load the newest records.": "投递记录已变化，请刷新以加载最新记录。";
+    readonly "Could not load delivery records. The loaded records are kept; retry or refresh.": "无法加载投递记录，已保留先前加载的记录；请重试或刷新。";
+    readonly "These records confirm inbox delivery, not successful model execution.": "这些记录确认消息已投递至收件队列，不代表模型执行成功。";
+    readonly "Retention: {days} days / {records} records": "保留限制：{days} 天 / {records} 条";
+    readonly "No deliveries have been recorded yet.": "暂无投递记录。";
+    readonly "Earlier delivery records were removed by retention limits.": "更早的投递记录已按保留限制清理。";
+    readonly "Earlier delivery records are unavailable.": "更早的投递记录不可用。";
+    readonly "Delivery history": "投递记录";
+    readonly "Historical instruction unavailable": "历史指令内容不可用";
+    readonly Scheduled: "计划时间";
+    readonly "Destination session": "目标会话";
+    readonly "Retry older records": "重试加载更早记录";
+    readonly "Load older records": "加载更早记录";
+    readonly "Delivery record": "投递记录详情";
+    readonly "This terminal is listening on {origin}/oauth/callback until the attempt ends.": "本终端将在 {origin}/oauth/callback 等待登录回调，直到授权结束。";
+    readonly "The DeepSeek sign-in expired. Run /login to try again.": "DeepSeek 登录授权已过期，请重新登录。";
+    readonly "DeepSeek sign-in was cancelled.": "DeepSeek 登录授权已取消。";
+    readonly "DeepSeek sign-in timed out before the browser completed. Run /login to try again.": "等待浏览器登录超时，请重新登录。";
+    readonly "Could not sign out of the DeepSeek account. Try again from DSH Web/Desktop.": "无法退出 DeepSeek 账户，请从 DSH 网页或桌面版重试。";
+    readonly "Sign-in, profile and wallet balances. Shared with DSH.": "管理登录、账户资料和钱包余额，与 DSH 共享。";
+    readonly Manage: "管理";
+    readonly "Manage the account shared with DSH": "管理与 DSH 共享的账户";
+    readonly "Loading account\u2026": "正在加载账户…";
+    readonly "Browser authorization is in progress.": "正在等待浏览器授权。";
+    readonly "Signed out": "未登录";
+    readonly "Signed in \u00B7 shared with DSH": "已登录 · 与 DSH 共享";
+    readonly "Loading profile\u2026": "正在加载账户资料…";
+    readonly "Profile has no display name or contact.": "账户未提供显示名称或联系方式。";
+    readonly "Could not load the profile. Refresh to retry.": "无法加载账户资料，请刷新重试。";
+    readonly "Loading balances\u2026": "正在加载余额…";
+    readonly "Recharge balance": "充值余额";
+    readonly "Bonus balance": "赠送余额";
+    readonly "No wallets returned.": "账户未返回钱包。";
+    readonly "Could not load balances. Refresh to retry.": "无法加载余额，请刷新重试。";
+    readonly "Choose an account model": "选择账户模型";
+    readonly "Account models": "账户模型";
+    readonly "Continue sign-in": "继续登录";
+    readonly "Cancel authorization": "取消授权";
+    readonly "Sign in": "登录";
+    readonly "Account models are unavailable in this session.": "当前会话无法选择账户模型。";
+    readonly "Could not complete the account action. Refresh and retry.": "账户操作未完成，请刷新后重试。";
+    readonly "DeepSeek sign-in expired. Sign in again from Settings \u2192 DeepSeek account.": "DeepSeek 登录已失效，请在设置 → DeepSeek 账户中重新登录。";
+    readonly "This model requires a DeepSeek account. Sign in from Settings \u2192 DeepSeek account.": "此模型需要 DeepSeek 账户，请在设置 → DeepSeek 账户中登录。";
+    readonly "Manage account sign-in, profile and balances.": "管理账户登录、资料和余额。";
+    readonly "Could not read the shared DeepSeek account state.": "无法读取共享的 DeepSeek 账户状态。";
+    readonly "Signed in to the DeepSeek account.": "已登录 DeepSeek 账户。";
+    readonly "Removes the local grant and revokes it in the background. The browser session is not signed out.": "移除本地授权并在后台撤销授权，不退出浏览器登录。";
+    readonly "Signed out of the DeepSeek account. The local grant was removed; remote revocation continues in the background.": "已退出 DeepSeek 账户。本地授权已移除，后台将继续撤销远端授权。";
+    readonly "DeepSeek sign-in cancelled.": "已取消 DeepSeek 登录。";
+    readonly "Could not start DeepSeek sign-in.": "无法开始 DeepSeek 登录。";
+    readonly "Used when a command has no explicit timeout, capped by Maximum timeout. Accepts ms, s, m or h. Applies to new commands.": "命令未指定超时时使用此值，且不超过最大超时。支持 ms、s、m、h，作用于新命令。";
+    readonly "Caps both default and requested command timeouts. A larger default is clamped to this limit. Applies to new commands.": "限制默认和命令自行指定的超时时间。默认值更大时按此上限执行，作用于新命令。";
+    readonly "Default in-memory limit for each output stream; overflow spills to a temporary file. A command can override its stdout limit. Accepts B, KB, KiB, MB, MiB, GB or GiB.": "每个输出流在内存中的默认保留上限，超出部分可从临时文件读取。命令可单独指定标准输出上限。支持 B、KB、KiB、MB、MiB、GB、GiB。";
+    readonly "Maximum bytes retained in each stream\u2019s spill file. The in-memory tail has its own Output limit; a spill file may omit excess output. Applies to new commands.": "每个输出流临时文件的保留上限。内存中的末尾输出另受输出限制约束，临时文件可能不包含超出此上限的内容。作用于新命令。";
+    readonly "Time allowed for a process to stop before forced termination. Applies to new commands; must not exceed 2147483647 ms.": "请求进程停止后、强制终止前的等待时间。作用于新命令，不得超过 2147483647 ms。";
+    readonly "Maximum parallel-safe tool calls in one step. Other calls remain serial. Applies to subsequent tool batches; does not change subagent capacity.": "单步内允许并行的工具调用数量上限，其他调用仍串行执行。作用于之后的工具调用批次，不改变子代理并发数。";
+    readonly "Enter a positive finite number.": "请输入大于 0 的有限数值。";
+    readonly "Shutdown grace must not exceed 2147483647 ms.": "终止宽限时间不得超过 2147483647 ms。";
+    readonly "These settings are no longer available. Cancel and reopen Settings.": "这些设置已不可用，请取消并重新打开设置。";
+    readonly "Settings saved.": "设置已保存。";
+    readonly "Edit the draft, then Apply to save.": "编辑草稿，点击应用后保存。";
+    readonly "Edit delegation limits and model choices together, then Apply to save.": "统一编辑委派限制和可选模型，点击应用后保存。";
+    readonly "Main agent: depth 0; its children: depth 1; their children: depth 2. A tool\u2019s own depth limit takes precedence. Applies to future delegations.": "主代理深度为 0，直接子代理为 1，子代理的子代理为 2。工具自身的深度限制优先；修改作用于之后的委派。";
+    readonly "Counts live subagents at every depth under one main agent, excluding the main agent. Lowering this limit does not stop existing children.": "统计同一主代理下各层仍在运行的子代理，不包含主代理。降低上限不会停止已有子代理。";
+    readonly "Applies to new sessions only. Existing sessions keep their model policy; forked children inherit the parent route. Disabling keeps the model list.": "仅作用于新会话。已有会话保留原模型策略，分叉子代理继承父代理路由。关闭后保留模型名单。";
+    readonly "Choose exact provider and model routes for new sessions. Enabling model selection requires at least one route.": "为新会话选择具体的服务商和模型。启用模型选择时，名单中至少需要一个模型。";
+    readonly "Model catalog could not be loaded. Use Refresh models to retry.": "模型目录加载失败，请用刷新模型重试。";
+    readonly "Some model providers could not be loaded. Use Refresh models to retry.": "部分模型服务商加载失败，请用刷新模型重试。";
+    readonly "Currently unavailable": "当前不可用";
+    readonly "Choose models for the draft": "选择模型并暂存";
+    readonly "Space toggles a model; Enter keeps the selection in the draft. Return to Subagents and use Refresh models to retry a failed catalog.": "空格勾选模型，回车保留到草稿。目录加载失败时，返回子代理设置并选择刷新模型重试。";
+    readonly "No models are available. Configure a provider or use Refresh models.": "暂无可用模型，请配置服务商或刷新模型。";
+    readonly "Enter a non-negative whole number.": "请输入不小于 0 的整数。";
+    readonly "Restoring inheritance changes the draft. Apply saves it.": "恢复继承先暂存到草稿，点击应用后保存。";
+    readonly "Delegation limits": "委派限制";
+    readonly "Refresh models": "刷新模型";
+    readonly "Subagent settings saved.": "子代理设置已保存。";
+    readonly "Choose at least one allowed model before enabling subagent model selection.": "启用子代理模型选择前，请至少选择一个允许的模型。";
+    readonly "Protected value": "受保护的值";
+    readonly "Loading models\u2026": "正在加载模型…";
+    readonly "Results per search": "每次搜索结果数";
+    readonly "A deployment API key still takes precedence. Update its source before replacing the referenced key.": "部署配置中的 API 密钥仍优先生效，请先更新其来源，再替换引用的密钥。";
+    readonly "Web search and fetch": "网页搜索与抓取";
+    readonly "Choose search and fetch providers, edit their settings, then Apply to save.": "选择搜索和抓取服务商，编辑设置后选择应用保存。";
+    readonly "DeepSeek (legacy)": "DeepSeek（旧版）";
+    readonly "Direct fetch": "直接抓取";
+    readonly "Uses the conversation\u2019s DeepSeek account or the configured API key. Calls the hosted Search API without an auxiliary model turn; service charges may apply.": "使用当前会话的 DeepSeek 账号或配置的 API 密钥，直接调用托管搜索 API，不经过辅助模型回合；可能产生服务费用。";
+    readonly "Uses the conversation\u2019s DeepSeek account or the configured API key. Runs an auxiliary Messages model turn with web search; model charges apply.": "使用当前会话的 DeepSeek 账号或配置的 API 密钥，通过辅助 Messages 模型回合执行搜索，会产生模型费用。";
+    readonly "Fetches from this computer without a model or DeepSeek credential. Local DNS and network access apply; private addresses are blocked and content is bounded.": "从本机抓取网页，不调用模型，也不需要 DeepSeek 凭据。受本地 DNS 和网络影响，禁止访问私有地址，返回内容有大小限制。";
+    readonly "Uses the conversation\u2019s DeepSeek account or the configured API key. Fetches through DeepSeek without an auxiliary model turn or local DNS lookup; service charges and content limits apply.": "使用当前会话的 DeepSeek 账号或配置的 API 密钥，经 DeepSeek 抓取网页，不经过辅助模型回合或本地 DNS 解析；有服务费用及内容限制。";
+    readonly "Provider list could not be loaded. The last known list is shown; retry to refresh it.": "服务商列表加载失败，保留上次成功加载的列表，请重试刷新。";
+    readonly "The credential reference changed. Enter the key again for the current reference.": "凭据引用已更改，请为当前引用重新输入密钥。";
+    readonly "Configure this provider in its plugin settings.": "请在该服务商的插件设置中配置。";
+    readonly "Configuration changed. Your draft is kept. Cancel and reopen to load the latest settings.": "配置已在其他位置修改，草稿已保留。取消并重新打开以载入最新设置。";
+    readonly "Web settings are no longer available.": "网页服务设置已不可用。";
+    readonly "Use the deployment or environment selection; multiple usable providers can be ambiguous.": "使用部署或环境设置；存在多个可用服务商时可能无法自动选择。";
+    readonly "Not loaded": "未加载";
+    readonly "Deployment default": "部署默认值";
+    readonly "Choose a provider": "选择服务商";
+    readonly "Enter a whole number from 1 to 50.": "请输入 1 到 50 之间的整数。";
+    readonly "Enter a positive whole number.": "请输入正整数。";
+    readonly "Credential status unavailable": "凭据状态不可用";
+    readonly "Maximum searches per request": "每次请求最多搜索次数";
+    readonly "Provider settings saved, but the key could not be stored. Apply retries the key before changing providers.": "服务商参数已保存，但密钥保存失败。选择应用会先重试密钥，再切换服务商。";
+    readonly "Web search and fetch settings saved.": "网页搜索与抓取设置已保存。";
+    readonly "Profile override": "配置档案覆盖";
+    readonly Draft: "草稿";
+    readonly "Leave empty to use the level name.": "留空使用等级名称。";
+    readonly "Add model": "添加模型";
+    readonly "Keep list": "保留列表";
+    readonly "Keep model": "保留模型";
+    readonly "Move up": "上移";
+    readonly "Move down": "下移";
+    readonly "Model settings": "模型设置";
+    readonly "Edit this model": "编辑此模型";
+    readonly "Model ID": "模型 ID";
+    readonly "Enter one unique model ID.": "请输入一个不重复的模型 ID。";
+    readonly "Context window": "上下文容量";
+    readonly "Maximum output tokens": "最大输出 Token 数";
+    readonly "Input types": "输入类型";
+    readonly "Reasoning levels": "推理等级";
+    readonly "Delete model": "删除模型";
+    readonly "Remove this model from the draft?": "从草稿中删除此模型？";
+    readonly "Edit models, then keep the list in the provider draft": "编辑模型，将列表保留到服务商草稿";
+    readonly "Apply in Provider settings saves the draft. Cancel discards this list edit.": "在服务商设置中选择应用后保存。取消会放弃本次列表编辑。";
+    readonly "Enter a positive whole number of tokens.": "请输入正整数 Token 数。";
+    readonly "Choose input types or restore inheritance": "选择输入类型或恢复继承";
+    readonly "Select at least one input type": "请至少选择一种输入类型";
+    readonly "Restore inheritance": "恢复继承";
+    readonly Text: "文本";
+    readonly Image: "图片";
+    readonly "Configure levels and API values": "配置推理等级及 API 值";
+    readonly "Choose levels": "选择等级";
+    readonly "Disables reasoning": "关闭推理";
+    readonly "Disable reasoning": "关闭推理";
+    readonly "API value": "API 值";
+    readonly "Reasoning needs a thinking level and a nonempty API value for each level.": "推理至少需要一个非 off 等级，且每个等级的 API 值不能为空。";
+    readonly "Apply the restored catalog before editing its models.": "请先应用恢复的目录，再编辑其中的模型。";
+    readonly "Model providers": "模型服务商";
+    readonly "Manage provider credentials, endpoints and model lists. Keeps the selected model.": "管理服务商凭据、地址和模型列表，保留当前模型选择。";
+    readonly "Choose a provider to configure": "选择要配置的服务商";
+    readonly "Add model provider": "添加模型服务商";
+    readonly Refresh: "刷新";
+    readonly "Custom model API": "自定义模型 API";
+    readonly "Choose a catalog provider or a custom API": "选择目录中的服务商或自定义 API";
+    readonly "Provider settings": "服务商设置";
+    readonly "Edit the draft, then Apply to save": "编辑草稿，选择应用后保存";
+    readonly "API key": "API 密钥";
+    readonly "Display name": "显示名称";
+    readonly "Model list": "模型列表";
+    readonly "Fetch available models": "获取可用模型";
+    readonly "Restore default models": "恢复默认模型";
+    readonly Apply: "应用";
+    readonly "Delete provider": "删除服务商";
+    readonly Inherited: "继承设置";
+    readonly "Key stored locally": "密钥已保存在本地";
+    readonly "Environment credential": "环境凭据";
+    readonly "Key not configured": "未配置密钥";
+    readonly "Provider-managed authentication": "服务商自行管理认证";
+    readonly "New key ready to save": "新密钥待保存";
+    readonly "{count} models": "{count} 个模型";
+    readonly "DeepSeek Account": "DeepSeek 账户";
+    readonly "Account models are managed by the account. Use /login or /logout to manage sign-in.": "账号管理其模型列表，使用 /login 或 /logout 管理登录状态。";
+    readonly "Remove this provider from the profile?": "从当前配置档案删除此服务商？";
+    readonly "Model ids, separated by commas": "模型 ID，以逗号分隔";
+    readonly "Leave empty to keep the saved credential. Stored keys are never displayed.": "留空保留已保存的凭据，已有密钥不会显示。";
+    readonly "Order is preserved. Existing model options are retained.": "按输入顺序排列，保留已有模型的其他参数。";
+    readonly "Leave empty to restore inheritance.": "留空恢复继承设置。";
+    readonly "Provider saved. The selected model is unchanged.": "服务商已保存，当前模型选择保持不变。";
+    readonly "Provider removed. The selected model is unchanged.": "服务商已删除，当前模型选择保持不变。";
+    readonly "Configuration changed. Your draft is kept. Cancel and reopen the provider to load the latest settings.": "配置已在其他位置修改，草稿已保留。取消并重新打开服务商以载入最新设置。";
+    readonly "Configuration saved, but the key could not be stored. Your key draft is kept; Apply retries saving it.": "配置已保存，但密钥保存失败。密钥草稿已保留，选择应用可重试保存密钥。";
+    readonly "Custom APIs require a URL, a protocol and at least one model.": "自定义 API 需要地址、协议和至少一个模型。";
+    readonly "This provider id already exists.": "此服务商 ID 已存在。";
+    readonly "Paste only the API key, without quotes or an environment assignment.": "请仅粘贴 API 密钥，不要包含引号或环境变量赋值。";
+    readonly "Model ids must be unique.": "模型 ID 不能重复。";
+    readonly "No models were returned. Enter model ids manually.": "未返回模型，请手动输入模型 ID。";
+    readonly "This credential is managed externally. Update its source before replacing it.": "此凭据由外部来源管理，请先更新对应来源。";
+    readonly "This provider is supplied by the deployment and cannot be deleted here.": "此服务商由部署配置提供，无法在此删除。";
+    readonly "This model list contains protected fields. Edit it in the profile configuration.": "此模型列表包含受保护字段，请在配置档案中编辑。";
+    readonly "Provider configuration is no longer available.": "此服务商的配置已不可用。";
+    readonly Workflow: "工作流";
+    readonly "\u2190\u2192 fold": "←→ 折叠";
+    readonly "type search": "输入筛选";
+    readonly "Ctrl+\u2191\u2193 preview": "Ctrl+↑↓ 预览";
+    readonly "Not available to open": "无法打开";
+    readonly Cancelled: "已取消";
+    readonly "The workflow session is no longer active.": "工作流所属会话已不再处于当前视图。";
+    readonly "This workflow is no longer available.": "此工作流已不可用。";
+    readonly "Browse phases and members. Only running local members can be opened.": "浏览阶段与成员，仅可打开正在运行的本地成员。";
+    readonly "No matching workflow members.": "没有匹配的工作流成员。";
+    readonly "This workflow member is no longer available to open.": "此工作流成员已无法打开。";
+    readonly "This subagent is read-only.": "此子代理为只读。";
+    readonly "This subagent is not loaded locally. Send it a message to continue before managing its queue.": "此子代理尚未在本地加载。请先发送消息继续对话，再管理队列。";
+    readonly "The queue session is no longer active.": "队列所属会话已不再处于当前视图。";
+    readonly "Steering needs an active turn. Use Enter to send the next message.": "插话需要有正在运行的回合。按 Enter 发送下一条消息。";
+    readonly Agents: "子代理";
+    readonly Ready: "可继续";
+    readonly "Needs approval": "需要审批";
+    readonly "Ctrl+C stops this agent \u00B7 Esc to return": "Ctrl+C 停止此代理 · Esc 返回";
+    readonly "Esc to return": "Esc 返回";
+    readonly "Read-only \u00B7 Esc to return": "只读 · Esc 返回";
+    readonly "Enter to send": "Enter 发送";
+    readonly "\u2191\u2193 \u00B7 Enter open \u00B7 Esc": "↑↓ · Enter 查看 · Esc";
+    readonly "\u2193 select": "↓ 选择";
+    readonly "{count} ready": "{count} 个可继续";
+    readonly "{count} running": "{count} 个运行中";
+    readonly "{count} done": "{count} 个已完成";
+    readonly "{count} failed": "{count} 个失败";
+    readonly "{count} stopped": "{count} 个已停止";
+    readonly "{count} need approval": "{count} 个需要审批";
+    readonly "Enter while running": "运行时 Enter 行为";
+    readonly "Queue waits for the next turn; Steer guides the next model step. Explicit Queue and Steer shortcuts keep their meaning.": "排队会等待下一回合；插话会指导下一次模型步骤。排队和插话快捷键的含义保持固定。";
+    readonly "Enter: Steer \u00B7 {key}: Queue": "Enter：插话 · {key}：排队";
+    readonly "steer next step": "转为插话";
+    readonly "Select an accepted Queue message to steer.": "请选择已接收的排队消息，再转为插话。";
+    readonly "Steering needs an active turn. The message stays queued.": "需要有正在运行的回合才能插话。消息仍保留在队列中。";
+    readonly "Could not steer or restore the queue entry. The message and attachments are now an unsent draft.": "无法转为插话或恢复队列条目。消息和附件已恢复为未发送的草稿。";
+    readonly edit: "编辑";
+    readonly "Steer \u00B7 next step": "插话 · 下一步";
+    readonly "Queue \u00B7 next turn": "排队 · 下一回合";
+    readonly Queue: "排队";
+    readonly Steer: "插话";
+    readonly "next turn": "下一回合";
+    readonly Sending: "发送中";
+    readonly "not yet accepted": "尚未接收";
+    readonly Recovered: "已恢复";
+    readonly "review before sending": "确认后发送";
+    readonly "Recovered \u00B7 review before sending": "已恢复 · 确认后发送";
+    readonly "send recovered": "发送恢复的输入";
+    readonly "Select a recovered input to send.": "请选择一条已恢复的输入进行发送。";
+    readonly "Steer: next step \u00B7 Queue: next turn \u00B7 Recovered: Alt+R sends the selected input.": "插话：下一步 · 排队：下一回合 · 已恢复：Alt+R 发送选中的输入。";
+    readonly "Sending \u00B7 not yet accepted": "发送中 · 尚未接收";
+    readonly "Enter: Queue \u00B7 {key}: Steer": "Enter：排队 · {key}：插话";
+    readonly "Steer taken for the next step": "插话已取出，供下一步使用";
+    readonly "Queue taken for the next turn": "排队消息已取出，供下一回合使用";
+    readonly "\u2191/Alt+Up recall \u00B7 Alt+Q manage": "↑/Alt+Up 取回 · Alt+Q 管理";
+    readonly "\u2191 recall latest \u00B7 Alt+Q manage": "↑ 取回最近一条 · Alt+Q 管理";
+    readonly "Alt+Q manage": "Alt+Q 管理";
+    readonly "{count} earlier": "另有 {count} 条更早的消息";
+    readonly "Message Queue": "待处理消息";
+    readonly "Edit Queued Message": "编辑待处理消息";
+    readonly "Steer: next step \u00B7 Queue: next turn \u00B7 Sending: not yet accepted.": "插话：下一步 · 排队：下一回合 · 发送中：尚未接收。";
+    readonly "Enter saves \u00B7 Alt+Enter inserts a line \u00B7 Esc cancels. Images and files are kept.": "Enter 保存 · Alt+Enter 换行 · Esc 取消。图片和文件会保留。";
+    readonly "No pending messages.": "没有待处理消息。";
+    readonly withdraw: "撤回";
+    readonly "move earlier": "前移";
+    readonly "move later": "后移";
+    readonly "That message is no longer pending.": "该消息已不在队列中。";
+    readonly "The message was already taken. Your edit is restored as an unsent draft.": "该消息已被取出。修改内容已恢复为未发送的草稿。";
+    readonly "Queue closed for a request for input. Your edit is an unsent draft; the queued message is unchanged.": "队列已让位给输入请求。修改内容已恢复为未发送的草稿；队列中的原消息保持不变。";
+    readonly "These entries cannot move across a system-owned queue message.": "这些消息不能跨过系统管理的队列消息。";
+    readonly "Steering needs an active parent turn. Use Enter to send the next message.": "插话需要主会话正在运行。按 Enter 发送下一条消息。";
+    readonly "Finish editing the queued follow-up with Enter before steering.": "请先按 Enter 完成排队消息的编辑，再发送插话。";
+    readonly "UI language": "界面语言";
+    readonly "Response language": "回复语言";
+    readonly "Follow UI": "跟随界面";
+    readonly Auto: "自动";
+    readonly "Simplified Chinese": "简体中文";
+    readonly English: "English";
+    readonly auto: "自动";
+    readonly "zh-CN": "简体中文";
+    readonly en: "English";
+    readonly General: "常规";
+    readonly Models: "模型";
+    readonly "Agent presets": "Agent 预设";
+    readonly Plugins: "插件";
+    readonly Terminal: "终端";
+    readonly Advanced: "高级";
+    readonly Appearance: "外观";
+    readonly Input: "输入";
+    readonly Startup: "启动";
+    readonly Notifications: "通知";
+    readonly "Status line": "状态栏";
+    readonly "Settings \u00B7 Profile": "设置 · 配置档案";
+    readonly "Default access": "默认权限";
+    readonly "Current session access": "当前会话权限";
+    readonly "Default Agent preset": "默认 Agent 预设";
+    readonly "Current session preset": "当前会话预设";
+    readonly "Model and reasoning": "模型与推理强度";
+    readonly "Provider credentials": "服务商凭据";
+    readonly "Sign out": "退出登录";
+    readonly "Manage plugins": "管理插件";
+    readonly Configure: "配置";
+    readonly Open: "打开";
+    readonly Restore: "恢复";
+    readonly "Restore layout": "恢复布局";
+    readonly Choose: "选择";
+    readonly "Choose provider": "选择服务商";
+    readonly Theme: "主题";
+    readonly Color: "颜色";
+    readonly "Color palette": "配色方案";
+    readonly "SGR styling": "终端文字样式";
+    readonly Motion: "动画";
+    readonly "Math in replies": "回复中的数学公式";
+    readonly "Mermaid in replies": "回复中的 Mermaid 图表";
+    readonly "Browse thinking and tool calls": "浏览思考与工具调用";
+    readonly "Hidden (default) folds thinking to one line; Shown opens it. Ctrl+O browses individual items; Ctrl+T changes the default.": "默认将思考折叠为一行，也可设为显示。Ctrl+O 浏览单项；Ctrl+T 切换默认展开方式。";
+    readonly "Thinking in turns": "思考内容";
+    readonly Editor: "编辑器";
+    readonly "Mouse interaction": "鼠标交互";
+    readonly "Paste protection": "粘贴保护";
+    readonly "Copy on select": "选中即复制";
+    readonly "Terminal title": "终端标题";
+    readonly "Terminal status": "终端状态";
+    readonly "Update checks": "更新检查";
+    readonly "Release notes": "更新说明";
+    readonly Telemetry: "统计信息";
+    readonly Density: "信息密度";
+    readonly Model: "模型";
+    readonly Effort: "推理强度";
+    readonly Path: "路径";
+    readonly Session: "会话";
+    readonly Context: "上下文";
+    readonly Ctx: "上下文";
+    readonly Cache: "缓存";
+    readonly Tokens: "Token";
+    readonly Latency: "延迟";
+    readonly Duration: "耗时";
+    readonly Activity: "活动";
+    readonly Tools: "工具";
+    readonly Turns: "回合";
+    readonly Steps: "步骤";
+    readonly "Session totals": "会话总计";
+    readonly Keybindings: "快捷键";
+    readonly Shell: "Shell";
+    readonly "Tool parallelism": "工具并行度";
+    readonly "Parallel tool calls": "并行工具调用数";
+    readonly Subagents: "子代理";
+    readonly "Subagent models": "子代理模型";
+    readonly "Model selection": "模型选择";
+    readonly "Allowed models": "允许的模型";
+    readonly "Delegation depth": "委派深度";
+    readonly "Concurrent subagents": "并行子代理数";
+    readonly "Web providers": "网页服务";
+    readonly "Command hooks": "命令钩子";
+    readonly "Installation status": "安装状态";
+    readonly "Configure plugins": "配置插件";
+    readonly "Let the agent create a plugin": "让 Agent 创建插件";
+    readonly "Plugin entries": "插件条目";
+    readonly Bundles: "插件包";
+    readonly Discover: "发现插件";
+    readonly "Install bundle": "安装插件包";
+    readonly "Manage this profile": "管理当前配置档案";
+    readonly "Choose a plugin to configure": "选择要配置的插件";
+    readonly "Plugin settings": "插件设置";
+    readonly "Creator is unavailable in this profile.": "当前配置档案中无法使用 Creator。";
+    readonly "Start Creator without changing your default Agent preset.": "进入 Creator，保留默认 Agent 预设。";
+    readonly "Changes affect every session using this profile. Package replacements may require a restart.": "更改会影响使用此配置档案的所有会话。替换插件包可能需要重启。";
+    readonly "Shell, subagents, web providers and installed plugin settings.": "配置 Shell、子代理、网页服务与已安装插件。";
+    readonly "Browse the plugin indexes this profile configures and install an entry.": "浏览当前配置的插件索引并安装插件。";
+    readonly "Choose access for new sessions": "选择新会话的默认权限";
+    readonly "The current session keeps its access level.": "当前会话的权限保持不变。";
+    readonly "Choose the default for new sessions": "选择新会话的默认预设";
+    readonly "Existing sessions keep their preset.": "已有会话的预设保持不变。";
+    readonly "Changes interface text immediately. Auto follows the terminal locale.": "界面文字立即切换。“自动”跟随终端语言环境。";
+    readonly "Preferred language for replies, questions and plans": "回复、提问和计划使用的首选语言";
+    readonly "Saved in this profile; applies from the next turn.": "保存在当前配置档案中，从下一回合生效。";
+    readonly "Applies to new sessions only.": "仅对新会话生效。";
+    readonly "Use /permission to change this session.": "使用 /permission 修改当前会话权限。";
+    readonly "Use /agent to change a blank session.": "使用 /agent 修改空白会话的预设。";
+    readonly "Edits apply live to this profile.": "更改即时保存到当前配置档案。";
+    readonly "This profile is read-only.": "当前配置档案为只读。";
+    readonly "Changes only this session. Default access controls future sessions.": "仅修改当前会话。“默认权限”控制之后的新会话。";
+    readonly "Choose before the first prompt; does not change the new-session default.": "在首次发送消息前选择；不更改新会话的默认值。";
+    readonly "Open /model; changes the current selection and saves the default route.": "打开 /model，修改当前选择并保存为默认模型。";
+    readonly "Sign in or configure a provider. Does not change the selected model.": "登录或配置服务商，不改变已选模型。";
+    readonly "Remove saved provider credentials; environment credentials remain available.": "移除已保存的服务商凭据；环境变量中的凭据仍可使用。";
+    readonly "Inspect installed entries, enable bundles, discover plugins or start Creator.": "查看安装条目、启用插件包、发现插件或进入 Creator。";
+    readonly "Full adds smooth streaming and a working shimmer; Reduced keeps smooth streaming without the shimmer; Off follows provider chunks with static activity marks": "“完整”启用平滑输出与工作动画；“减少”只保留平滑输出；“关闭”按服务商数据块显示，使用静态活动标记。";
+    readonly "Auto formats supported formulas as terminal text; Source keeps the original LaTeX.": "“自动”将支持的公式排版为终端文字；“源码”保留原始 LaTeX。";
+    readonly "Copy and export retain the source.": "复制和导出保留源码。";
+    readonly "Auto draws complete diagrams that fit; Source shows Mermaid code.": "“自动”绘制完整且放得下的图表；“源码”显示 Mermaid 代码。";
+    readonly "Unsupported or incomplete diagrams retain their source.": "不支持或不完整的图表保留源码。";
+    readonly "Shown keeps reasoning visible while a turn runs; Hidden collapses it to one line.": "“显示”在运行中展示思考内容；“隐藏”将其折叠为一行。";
+    readonly "Ctrl+T flips this for the session.": "Ctrl+T 可切换当前会话的显示方式。";
+    readonly "Open files and edit prompts with this app.": "使用此应用打开文件或编辑输入。";
+    readonly "Save and close the file to return.": "保存并关闭文件后返回。";
+    readonly "Auto supports scrolling and text selection, respecting tmux mouse off.": "“自动”支持滚动和文字选择，并遵循 tmux 的鼠标开关。";
+    readonly "Native leaves the mouse to the terminal; TUI overrides the tmux preference.": "“原生”由终端处理鼠标；“TUI”覆盖 tmux 偏好。";
+    readonly "Treat rapid text and Enter keys as a paste when the terminal does not mark pasted input.": "终端未标记粘贴时，将快速连续的文字与回车视为粘贴。";
+    readonly "Copy selected text when the mouse is released.": "松开鼠标时复制选中文字。";
+    readonly "With this off, use Alt+C, Enter, or right-click to copy.": "关闭后可使用 Alt+C、Enter 或右键复制。";
+    readonly "Status and session, session only, status and workspace, or Off.": "可显示状态与会话、仅会话、状态与工作区，或关闭。";
+    readonly "Changes the terminal tab title.": "更改终端标签页标题。";
+    readonly "Auto reports the root Agent lifecycle once the terminal answers an OSC 7501 capability query; On reports regardless; Off clears reports.": "“自动”在终端确认支持 OSC 7501 后报告主 Agent 状态；“开启”始终报告；“关闭”清除状态。";
+    readonly "Check npm once a day and notify when a newer release is available": "每天检查一次 npm，有新版本时提示";
+    readonly "Show new release notes once after an upgrade": "升级后显示一次新版本说明";
+    readonly "Notify when a long turn finishes or input is required.": "长回合结束或需要输入时通知。";
+    readonly "Away also waits until the terminal loses focus; Always reports regardless of focus.": "“离开时”仅在终端失焦后通知；“始终”不受焦点影响。";
+    readonly "Show session metrics below the first footer line": "在状态栏首行下方显示会话统计";
+    readonly "Minimal shows occupancy and cache; Standard adds latency; Verbose adds tokens on the same line and gives durations and activity a third, with long labels and the detailed context form": "“精简”显示上下文占用与缓存；“标准”增加延迟；“详细”增加 Token、耗时和活动统计，使用完整标签与详细上下文。";
+    readonly "Restore the inherited status-line layout, colors and visibility.": "恢复继承的状态栏布局、颜色和可见性。";
+    readonly "Confirmation shows what will be restored.": "确认前会显示恢复内容。";
+    readonly on: "开启";
+    readonly off: "关闭";
+    readonly full: "完整";
+    readonly reduced: "减少";
+    readonly source: "源码";
+    readonly shown: "显示";
+    readonly hidden: "隐藏";
+    readonly minimal: "精简";
+    readonly standard: "标准";
+    readonly verbose: "详细";
+    readonly summary: "摘要";
+    readonly unfocused: "离开时";
+    readonly always: "始终";
+    readonly native: "原生";
+    readonly status: "状态与会话";
+    readonly session: "会话";
+    readonly workspace: "工作区";
+    readonly "status-workspace": "状态与工作区";
+    readonly disabled: "已关闭";
+    readonly Preview: "预览";
+    readonly "No matching settings": "没有匹配的设置";
+    readonly "Search: {query} \u00B7 {count} matches": "搜索：{query} · {count} 项匹配";
+    readonly "type to filter": "输入以筛选";
+    readonly "Type filter": "输入以筛选";
+    readonly "\u2191\u2193 select": "↑↓ 选择";
+    readonly "\u2190\u2192 change": "←→ 修改";
+    readonly "Tab sections": "Tab 分类";
+    readonly "/ search": "/ 搜索";
+    readonly "Ctrl+R reset": "Ctrl+R 恢复";
+    readonly "Esc back": "Esc 返回";
+    readonly "Enter open": "Enter 打开";
+    readonly "Enter configure": "Enter 配置";
+    readonly "Enter edit": "Enter 编辑";
+    readonly "Esc clear/back": "Esc 清除/返回";
+    readonly "Space show/hide": "Space 显示/隐藏";
+    readonly "Enter apply": "Enter 应用";
+    readonly "Esc cancel": "Esc 取消";
+    readonly "Tab actions": "Tab 操作";
+    readonly "Enter activate": "Enter 执行";
+    readonly "Tab/\u2190\u2192 select": "Tab/←→ 选择";
+    readonly "Tab/\u2190\u2192 actions": "Tab/←→ 操作";
+    readonly "Ctrl+C interrupt": "Ctrl+C 中断";
+    readonly "Ctrl+X editor": "Ctrl+X 编辑器";
+    readonly navigate: "选择";
+    readonly select: "选择";
+    readonly cancel: "取消";
+    readonly back: "返回";
+    readonly scroll: "滚动";
+    readonly toggle: "切换";
+    readonly submit: "提交";
+    readonly choose: "选择";
+    readonly filter: "筛选";
+    readonly Cancel: "取消";
+    readonly Close: "关闭";
+    readonly Continue: "继续";
+    readonly Save: "保存";
+    readonly Reset: "恢复";
+    readonly Done: "完成";
+    readonly Enable: "启用";
+    readonly Disable: "停用";
+    readonly Install: "安装";
+    readonly Remove: "移除";
+    readonly Retry: "重试";
+    readonly Back: "返回";
+    readonly Next: "下一步";
+    readonly Previous: "上一步";
+    readonly Question: "问题";
+    readonly "Plan review": "计划审核";
+    readonly "Approval required": "需要批准";
+    readonly "Allow {tool} once?": "允许执行一次 {tool}？";
+    readonly "Why reject {tool}, or what should the agent do instead?": "为什么拒绝 {tool}，或希望 Agent 如何继续？";
+    readonly "Allow once": "允许一次";
+    readonly Reject: "拒绝";
+    readonly "Reject with note": "拒绝并说明";
+    readonly "Remember allow": "记住允许决定";
+    readonly "Remember reject": "记住拒绝决定";
+    readonly "Run only this requested action.": "仅执行本次请求的操作。";
+    readonly "Deny this action.": "拒绝本次操作。";
+    readonly "Deny this action and guide the next step.": "拒绝本次操作，并说明下一步如何继续。";
+    readonly "Preview an exact invocation rule and choose its scope.": "预览精确匹配的调用规则并选择作用范围。";
+    readonly "Reject matching approval requests until revoked.": "在撤销前拒绝匹配的审批请求。";
+    readonly "Remember approval decision": "记住审批决定";
+    readonly "This session": "当前会话";
+    readonly "This workspace": "当前工作区";
+    readonly "Retained on resume; not inherited by forks or children.": "恢复会话时保留；分支和子会话不继承。";
+    readonly "Applies to sessions with this same workspace boundary.": "适用于工作区边界相同的会话。";
+    readonly "Save nothing and cancel this request.": "不保存，取消本次请求。";
+    readonly Later: "稍后";
+    readonly "Revision feedback": "修改意见";
+    readonly optional: "选填";
+    readonly "No match": "没有匹配";
+    readonly "No matching options": "没有匹配的选项";
+    readonly "No matching conversation turns.": "没有匹配的对话回合。";
+    readonly "Ask anything": "输入你的问题";
+    readonly "Run /login to connect a model": "运行 /login 连接模型";
+    readonly Compacting: "正在压缩上下文";
+    readonly Queued: "已排队";
+    readonly Starting: "正在启动";
+    readonly Running: "运行中";
+    readonly Waiting: "等待中";
+    readonly Failed: "失败";
+    readonly Stopped: "已停止";
+    readonly Interrupted: "已中断";
+    readonly Completed: "已完成";
+    readonly Thinking: "思考";
+    readonly Output: "输出";
+    readonly Reasoning: "思考";
+    readonly commands: "命令";
+    readonly files: "文件";
+    readonly " turn": " 回合";
+    readonly " turns": " 回合";
+    readonly " step": " 步";
+    readonly " steps": " 步";
+    readonly " in": " 输入";
+    readonly " out": " 输出";
+    readonly On: "开启";
+    readonly Off: "关闭";
+    readonly Enabled: "已启用";
+    readonly Disabled: "已停用";
+    readonly Settings: "设置";
+    readonly "Save settings": "保存设置";
+    readonly "Settings error": "设置错误";
+    readonly "Restore inherited setting": "恢复继承的设置";
+    readonly "Restore inherited setting\u2026": "恢复继承的设置…";
+    readonly "Restore inherited value": "恢复继承值";
+    readonly "Restore inherited value?": "恢复继承值？";
+    readonly "Set a value or restore inheritance": "设置值或恢复继承";
+    readonly "Choose a setting": "选择设置项";
+    readonly "Choose a setting to restore": "选择要恢复的设置项";
+    readonly "Remove a selected Profile override.": "移除选中的配置档案覆盖值。";
+    readonly "Set value": "设置值";
+    readonly "Reset to inherited": "恢复继承";
+    readonly "Enter a value": "输入值";
+    readonly "Enter a JSON value": "输入 JSON 值";
+    readonly "Choose a value": "选择值";
+    readonly "Default timeout": "默认超时";
+    readonly "Maximum timeout": "最长超时";
+    readonly "Output limit": "输出上限";
+    readonly "Retained output limit": "保留输出上限";
+    readonly "Shutdown grace": "终止宽限时间";
+    readonly Permissions: "权限";
+    readonly "Enable integration": "启用集成";
+    readonly "Disable integration": "停用集成";
+    readonly "Search provider": "搜索服务商";
+    readonly "Fetch provider": "网页获取服务商";
+    readonly "Allowed subagent models": "允许的子代理模型";
+    readonly "Choose models for new sessions": "选择新会话可用的模型";
+    readonly "No models are available. Configure a provider through /login or cancel to keep the current setting.": "没有可用模型。请通过 /login 配置服务商，或取消以保留当前设置。";
+    readonly "Model \u00B7 this session": "模型 · 当前会话";
+    readonly "Model (session)": "模型（当前会话）";
+    readonly "Type to search every provider, then Enter to switch": "输入以搜索所有服务商的模型，按 Enter 切换";
+    readonly "This session only": "仅当前会话";
+    readonly current: "当前";
+    readonly favorite: "收藏";
+    readonly Current: "当前";
+    readonly Agent: "Agent";
+    readonly "Choose Agent preset": "选择 Agent 预设";
+    readonly "Inspect composition": "查看组合";
+    readonly "Return to the current conversation": "返回当前对话";
+    readonly "View declared presets and this session\u2019s retained composition": "查看已声明的预设和当前会话保留的组合";
+    readonly "The Agent preset is fixed for this conversation": "当前对话的 Agent 预设已固定";
+    readonly "Read only": "只读";
+    readonly "Workspace write": "工作区可写";
+    readonly "Full access": "完全访问";
+    readonly "Custom access": "自定义权限";
+    readonly "read only": "只读";
+    readonly "workspace write": "工作区可写";
+    readonly "full access": "完全访问";
+    readonly "custom access": "自定义权限";
+    readonly "workspace-write": "工作区可写";
+    readonly "read-only": "只读";
+    readonly "danger-full-access": "完全访问";
+    readonly "Model and access": "模型与权限";
+    readonly "Files and output": "文件与输出";
+    readonly Tasks: "任务";
+    readonly "Settings and integrations": "设置与集成";
+    readonly Diagnostics: "诊断";
+    readonly Application: "应用";
+    readonly Extensions: "扩展";
+    readonly Skills: "技能";
+    readonly "Show commands and essential shortcuts": "查看命令和常用快捷键";
+    readonly "Open settings": "打开设置";
+    readonly "Copy the last reply, a code block, a command, or tool output": "复制最近回复、代码块、命令或工具输出";
+    readonly "Show tools visible to the agent": "查看 Agent 可用的工具";
+    readonly "Clear the transcript display": "清空当前对话视图";
+    readonly "Quit the application": "退出应用";
+    readonly "Select, favorite, or cycle models and reasoning effort": "选择、收藏或切换模型与推理强度";
+    readonly "Choose the session access level": "选择当前会话权限";
+    readonly "Choose the session Agent preset": "选择当前会话的 Agent 预设";
+    readonly "Sign in to a provider": "登录服务商";
+    readonly "Sign out of a stored provider or account": "退出已保存的服务商或账号";
+    readonly "Manage profile plugins and bundles": "管理配置档案的插件与插件包";
+    readonly "Review, edit, delete, and reorder pending messages": "查看、编辑、删除或调整待发消息顺序";
+    readonly "Start a new session": "新建会话";
+    readonly "Open the Session Library, search session content, or resume by ID": "打开会话库、搜索内容或按 ID 恢复会话";
+    readonly "Run the most recent human prompt again": "重新执行最近的用户请求";
+    readonly "Inspect MCP registration and available tools": "查看 MCP 注册信息和可用工具";
+    readonly "Attach a file to the composer, or review what this session already attached": "附加文件到输入框，或查看当前会话的附件";
+    readonly "List background jobs, replay one run, or stop one": "查看后台任务、回放运行或停止任务";
+    readonly "Inspect, edit, or delete scheduled reminders": "查看、编辑或删除定时提醒";
+    readonly "Include every keyboard shortcut": "包含全部快捷键";
+    readonly "Retrying in {seconds}s": "{seconds} 秒后重试";
+    readonly "Compacting {seconds}s": "正在压缩上下文 · {seconds} 秒";
+    readonly "Continues in {seconds}s \u00B7 {key} take time": "{seconds} 秒后继续 · {key} 暂停倒计时";
+    readonly "Take your time \u00B7 waiting for your answer": "慢慢来 · 等待你的回答";
+    readonly "No match for {query}.": "没有匹配 {query} 的选项。";
+    readonly "Nothing to choose.": "没有可选项。";
+    readonly "API key \u00B7 hidden": "API key · 已隐藏";
+    readonly "custom answer": "自定义回答";
+    readonly answer: "回答";
+    readonly confirm: "确认";
+    readonly skip: "跳过";
+    readonly "scroll for more": "滚动查看更多";
+    readonly "Model name on the first footer line.": "状态栏首行显示的模型名称。";
+    readonly "Reasoning effort on the first footer line.": "状态栏首行显示的推理强度。";
+    readonly "Workspace path on the right of the first footer line.": "状态栏首行右侧的工作区路径。";
+    readonly "Git branch on the first footer line.": "状态栏首行显示的 Git 分支。";
+    readonly "A dirty worktree stays warning.": "工作区有未提交更改时保持警告色。";
+    readonly "Folded session title on the first footer line.": "状态栏首行显示的会话标题。";
+    readonly "Off at Standard and Minimal; the terminal window title shows it regardless.": "“标准”和“精简”默认关闭；终端窗口标题仍会显示。";
+    readonly "Context occupancy, on the left of the second line.": "第二行左侧显示的上下文占用。";
+    readonly "Its representation follows the density.": "显示方式由信息密度决定。";
+    readonly "Prompt-cache hit rate, beside occupancy on the left.": "左侧上下文占用旁的提示词缓存命中率。";
+    readonly "Cache-hit percentages stay on the success color.": "缓存命中率保持成功色。";
+    readonly "Input and output token counts, on the right with the other cost figures.": "右侧显示的输入与输出 Token 数量。";
+    readonly "First-token latency and decode rate, on the right.": "右侧显示的首 Token 延迟与生成速度。";
+    readonly "Space shows or hides it.": "按 Space 显示或隐藏。";
+    readonly "Changed-file summary": "文件变更摘要";
+    readonly "Session history tools": "会话历史工具";
+    readonly "Ralph loop": "Ralph 循环";
+    readonly "Repeat-tool reminder": "重复工具提醒";
+    readonly "Advisor model calls": "顾问模型调用";
+    readonly "Saved in profile; applies live when supported.": "保存在配置档案中；支持时即时生效。";
+    readonly Copied: "已复制";
+    readonly "Thinking shown": "已显示思考内容";
+    readonly "Thinking hidden": "已隐藏思考内容";
+    readonly "Input required": "需要输入";
+    readonly "omdsh needs attention": "omdsh 需要处理";
+    readonly "omdsh finished": "omdsh 已完成";
+    readonly "Turn completed in {seconds}s": "回合已完成，耗时 {seconds} 秒";
+    readonly "{reason} after {seconds}s": "{reason}，耗时 {seconds} 秒";
+    readonly "Output token limit reached": "达到输出 Token 上限";
+    readonly "Turn was blocked": "回合被阻止";
+    readonly "Session was interrupted": "会话已中断";
+    readonly "Turn was interrupted": "回合已中断";
+    readonly "Turn failed": "回合失败";
+    readonly "Turn ended ({reason})": "回合结束（{reason}）";
+    readonly "Search History": "搜索输入历史";
+    readonly "No matching history": "没有匹配的输入历史";
+    readonly "No history yet": "暂无输入历史";
+    readonly "plan off\u2026": "正在退出计划模式…";
+    readonly "plan\u2026": "正在进入计划模式…";
+    readonly plan: "计划";
+    readonly LOOP: "循环";
+    readonly "LOOP DONE": "循环已完成";
+    readonly "LOOP PAUSED \u00B7 SEND TO RESUME": "循环已暂停 · 发送消息以继续";
+    readonly "LOOP WAITING \u00B7 SEND PROMPT": "循环等待中 · 请输入提示";
+    readonly "{count}/{total} REPEATS": "已重复 {count}/{total} 次";
+    readonly "{count} REPEAT": "已重复 {count} 次";
+    readonly "{count} REPEATS": "已重复 {count} 次";
+    readonly "LOOP \u00B7 {duration} LEFT": "循环 · 剩余 {duration}";
+    readonly "Where should this exact invocation be allowed?": "在哪个范围内允许此调用？";
+    readonly "Where should this exact invocation be rejected?": "在哪个范围内拒绝此调用？";
+    readonly "Matches the complete arguments, directory, Access and approval reason. Other sandbox and tool protections still apply.": "规则匹配完整参数、目录、权限级别和审批原因。其他沙箱与工具保护仍然有效。";
+    readonly "previous question": "上一题";
+    readonly "Start /new to choose a different preset before sending a message.": "使用 /new 开始新会话，在发送消息前选择其他预设。";
+    readonly "Locked after the first prompt \u00B7 /agent inspect shows composition diagnostics": "发送首条消息后锁定 · /agent inspect 查看组成详情";
+    readonly "Session Library": "会话库";
+    readonly Search: "搜索";
+    readonly Archived: "已归档";
+    readonly "Enter search text": "输入搜索文字";
+    readonly "Migrate session": "迁移会话";
+    readonly "Rename Session": "重命名会话";
+    readonly "Search session content": "搜索会话内容";
+    readonly "all sessions": "全部会话";
+    readonly "pin/unpin": "置顶/取消置顶";
+    readonly rename: "重命名";
+    readonly "search content": "搜索内容";
+    readonly "No archived sessions. Alt+V returns to active sessions.": "没有已归档会话。Alt+V 返回活跃会话。";
+    readonly "No active sessions. Alt+V shows archived sessions.": "没有活跃会话。Alt+V 显示已归档会话。";
+    readonly "API protocol": "API 协议";
+    readonly "Absolute http(s) prefix, for example http://127.0.0.1:11434/v1": "完整 http(s) 地址，例如 http://127.0.0.1:11434/v1";
+    readonly "Add a provider that is not in the catalog": "添加目录之外的服务商";
+    readonly "Ask the base URL for GET /models.": "通过 GET /models 查询端点支持的模型。";
+    readonly "Base URL": "基础 URL";
+    readonly "Choose a provider to log out from": "选择要退出的服务商";
+    readonly "Choose a provider to sign in or update": "选择要登录或更新的服务商";
+    readonly "Choose a sign-in method": "选择登录方式";
+    readonly "Choose models to enable": "选择要启用的模型";
+    readonly "Close this prompt; select the route in /model.": "关闭此提示，在 /model 中选择模型路由。";
+    readonly "Complete sign-in in your browser, then return here.": "在浏览器中完成登录，然后返回这里。";
+    readonly Custom: "自定义";
+    readonly "Custom models": "自定义模型";
+    readonly "Custom provider": "自定义服务商";
+    readonly "DeepSeek account": "DeepSeek 账户";
+    readonly "Delete the stored sign-in.": "删除已保存的登录信息。";
+    readonly "Enter model ids": "输入模型 ID";
+    readonly "Fetch from endpoint": "从端点获取";
+    readonly "How should omdsh learn the model ids?": "如何获取模型 ID？";
+    readonly "I completed sign-in": "已完成登录";
+    readonly "Keep the account grant.": "保留账号授权。";
+    readonly "Keep the current credential.": "保留当前凭据。";
+    readonly "Leave empty if the endpoint does not need a key.": "端点无需密钥时留空。";
+    readonly "Log out": "退出登录";
+    readonly "Login to DeepSeek": "登录 DeepSeek";
+    readonly "Logout from DeepSeek": "退出 DeepSeek";
+    readonly "Logout from DeepSeek account": "退出 DeepSeek 账户";
+    readonly "Lowercase letters, digits, and hyphens. This id is permanent.": "使用小写字母、数字和连字符。此 ID 创建后不可更改。";
+    readonly Provider: "服务商";
+    readonly "Provider id": "服务商 ID";
+    readonly "Remove the key from the local Harness credential store.": "从本地 Harness 凭据库中删除密钥。";
+    readonly "Remove the local grant and revoke it in the background.": "删除本地授权并在后台撤销。";
+    readonly "Remove the stored DeepSeek API key?": "删除已保存的 DeepSeek API 密钥？";
+    readonly "Separate multiple ids with commas. Example: llama3.1, qwen2.5-coder": "多个 ID 用逗号分隔，例如 llama3.1, qwen2.5-coder";
+    readonly "Sign out of the shared DeepSeek account?": "退出共享的 DeepSeek 账户？";
+    readonly "The account is signed in and shared with DSH.": "账号已登录，与 DSH 共享。";
+    readonly "Type one or more ids, separated by commas.": "输入一个或多个 ID，以逗号分隔。";
+    readonly "Use account route": "使用账户模型";
+    readonly "Withdraw this sign-in attempt.": "取消此次登录。";
+    readonly "configured externally": "外部配置";
+    readonly environment: "环境变量";
+    readonly "login in progress": "正在登录";
+    readonly "project .env": "项目 .env";
+    readonly "removes credential": "删除凭据";
+    readonly "removes route": "删除路由";
+    readonly "shared with DSH \u00B7 signed in": "与 DSH 共享 · 已登录";
+    readonly "signed in": "已登录";
+    readonly "stored locally": "本地保存";
+    readonly "user .env": "用户 .env";
+    readonly Access: "权限";
+    readonly "Allow unrestricted filesystem access without approval prompts?": "允许不经审批访问整个文件系统？";
+    readonly "Approval rule": "审批规则";
+    readonly "Approval rules": "审批规则";
+    readonly "Choose a remembered decision": "选择已保存的决定";
+    readonly "Choose how omdsh may access your workspace": "选择 omdsh 访问工作区的权限";
+    readonly "Future matching requests require a new decision.": "之后匹配的请求需要重新决定。";
+    readonly "Inspect and revoke remembered decisions": "查看和撤销已保存的决定";
+    readonly "Only enable this permission for a workspace and task you trust.": "仅对可信的工作区和任务启用此权限。";
+    readonly "Revoke rule": "撤销规则";
+    readonly "Allow these scripts and retry?": "允许这些脚本并重试？";
+    readonly "Check profile status": "检查配置档案状态";
+    readonly "Choose a bundle": "选择插件包";
+    readonly "Choose an entry to inspect or toggle": "选择要查看或启停的条目";
+    readonly "Dependency scripts": "依赖脚本";
+    readonly "Discover plugins": "发现插件";
+    readonly "Discover \u00B7 results": "发现插件 · 结果";
+    readonly "Install plugin": "安装插件";
+    readonly "Integration settings": "集成设置";
+    readonly "Manage bundle": "管理插件包";
+    readonly "Package name, version, Git URL, or absolute path": "包名、版本、Git URL 或绝对路径";
+    readonly "Plugin entry": "插件条目";
+    readonly "Search the plugin indexes (empty lists everything)": "搜索插件索引（留空列出全部）";
+    readonly "Configured route \u00B7 currently outside the model catalog": "已配置路由 · 当前不在模型目录中";
+    readonly "Could not change configuration": "无法更改配置";
+    readonly "File recovery snapshots": "文件恢复快照";
+    readonly "Restore inherited model or permissions\u2026": "恢复继承的模型或权限…";
+    readonly "Return to settings": "返回设置";
+    readonly "Web search \u00B7 API": "网页搜索 · API";
+    readonly "Web search \u00B7 Messages": "网页搜索 · Messages";
+    readonly Time: "时间";
+    readonly "Open files and edit prompts with this app. Save and close the file to return.": "使用此应用打开文件和编辑提示，保存并关闭文件后返回。";
+    readonly "Shown keeps reasoning visible while a turn runs; Hidden collapses it to one line. Ctrl+T flips this for the session.": "“显示”在回合运行时保留思考内容；“隐藏”将其折叠为一行。Ctrl+T 切换当前会话的显示方式。";
+    readonly "Status and session, session only, status and workspace, or Off. Changes the terminal tab title.": "终端标签页标题可显示状态与会话、仅会话、状态与工作区，或关闭。";
+    readonly "Restore the inherited status-line layout, colors and visibility. Confirmation shows what will be restored.": "恢复继承的状态栏布局、颜色和可见性。确认时会显示将恢复的内容。";
+    readonly "Copy selected text when the mouse is released. With this off, use Alt+C, Enter, or right-click to copy.": "松开鼠标时复制选中文字。关闭后使用 Alt+C、Enter 或右键复制。";
+    readonly "Notify when a long turn finishes or input is required. Away also waits until the terminal loses focus; Always reports regardless of focus.": "耗时回合结束或需要输入时通知。“离开时”仅在终端失去焦点后通知；“始终”不受焦点限制。";
+    readonly "Preferred language for replies, questions and plans.": "回复、提问和计划使用的首选语言。";
+    readonly "Resume this session with {command}": "使用以下命令恢复此会话：{command}";
+    readonly "Session metrics": "会话统计";
+    readonly "Show session metrics below the model and workspace line. The first line stays visible.": "显示模型与工作区下方的会话统计。关闭后仍保留首行信息。";
+    readonly "Minimal: context and cache. Standard: adds latency and speed. Verbose: adds tokens and totals. Item overrides stay in effect.": "精简：上下文与缓存。标准：增加延迟与速度。详细：增加 Token 与累计统计。逐项开关仍然生效。";
+    readonly "Latency / speed": "延迟与速度";
+    readonly "Turns / steps": "回合与步数";
+    readonly "Preview \u00B7 example data \u00B7 English": "预览 · 示例数据 · 固定英文";
+    readonly "Session metrics are off. Enable them to display this item.": "会话统计已关闭，开启后此项才会显示。";
+    readonly "Space toggles this preference; width may hide enabled items.": "Space 切换此偏好；宽度不足时，已开启的项也可能隐藏。";
+    readonly "TTFT and tokens per second, on the right of the metrics line.": "首 Token 延迟与每秒 Token 数，位于统计行右侧。";
+    readonly "LLM and tool time, on the left of the totals line. Appears when the metrics line fits.": "模型与工具耗时，位于累计行左侧。上方统计行完整时才显示。";
+    readonly "Turn and step counts, on the right of the totals line. Appears when the metrics line fits.": "回合与步数，位于累计行右侧。上方统计行完整时才显示。";
+    readonly "Session title on the first footer line. Hidden by default at Minimal and Standard.": "会话标题位于首行。精简与标准密度下默认隐藏。";
+    readonly "Restore inherited density and item visibility. Confirmation shows what will be restored.": "恢复继承的信息密度与逐项可见性。确认时会显示将恢复的内容。";
+    readonly "Model name on the first footer line. Space toggles this preference; width may hide enabled items.": "模型名称，位于首行。 Space 切换此偏好；宽度不足时，已开启的项也可能隐藏。";
+    readonly "Reasoning effort on the first footer line. Space toggles this preference; width may hide enabled items.": "推理强度，位于首行。 Space 切换此偏好；宽度不足时，已开启的项也可能隐藏。";
+    readonly "Workspace path on the right of the first footer line. Space toggles this preference; width may hide enabled items.": "工作区路径，位于首行右侧。 Space 切换此偏好；宽度不足时，已开启的项也可能隐藏。";
+    readonly "Git branch on the first footer line. A dirty worktree stays warning. Space toggles this preference; width may hide enabled items.": "Git 分支，位于首行。未提交的改动使用警告色。 Space 切换此偏好；宽度不足时，已开启的项也可能隐藏。";
+    readonly "Session title on the first footer line. Hidden by default at Minimal and Standard. Space toggles this preference; width may hide enabled items.": "会话标题，位于首行。精简与标准密度下默认隐藏。 Space 切换此偏好；宽度不足时，已开启的项也可能隐藏。";
+    readonly "Context occupancy, on the left of the second line. Its representation follows the density. Space toggles this preference; width may hide enabled items.": "上下文占用，位于第二行左侧。表示形式跟随信息密度。 Space 切换此偏好；宽度不足时，已开启的项也可能隐藏。";
+    readonly "Prompt-cache hit rate, beside occupancy on the left. Cache-hit percentages stay on the success color. Space toggles this preference; width may hide enabled items.": "提示缓存命中率，位于上下文占用旁。命中率使用成功色。 Space 切换此偏好；宽度不足时，已开启的项也可能隐藏。";
+    readonly "Input and output token counts, on the right with the other cost figures. Space toggles this preference; width may hide enabled items.": "输入和输出 Token 数，位于统计行右侧。 Space 切换此偏好；宽度不足时，已开启的项也可能隐藏。";
+    readonly "TTFT and tokens per second, on the right of the metrics line. Space toggles this preference; width may hide enabled items.": "首 Token 延迟与每秒 Token 数，位于统计行右侧。 Space 切换此偏好；宽度不足时，已开启的项也可能隐藏。";
+    readonly "LLM and tool time, on the left of the totals line. Appears when the metrics line fits. Space toggles this preference; width may hide enabled items.": "模型与工具耗时，位于累计行左侧。上方统计行完整时才显示。 Space 切换此偏好；宽度不足时，已开启的项也可能隐藏。";
+    readonly "Turn and step counts, on the right of the totals line. Appears when the metrics line fits. Space toggles this preference; width may hide enabled items.": "回合与步数，位于累计行右侧。上方统计行完整时才显示。 Space 切换此偏好；宽度不足时，已开启的项也可能隐藏。";
+};