@agent-native/core 0.100.2 → 0.101.3

package/corpus/templates/clips/desktop/src-tauri/src/native_screen/custom_capture.rs

@@ -0,0 +1,2518 @@
+//! Custom ScreenCaptureKit capture engine.
+//!
+//! Owns everything between "SCStream hands us a sample buffer" and "a
+//! fragmented MP4 grows on disk": the AVAssetWriter wrapper
+//! (`CustomScreenCaptureWriter`), the realtime `LiveAudioMixer` that combines
+//! mic + system audio into one track, the PCM decode/resample helpers, the
+//! AVFoundation/CoreMedia FFI glue, and the capture watchdog that rebuilds a
+//! stopped/stalled SCStream in place. Session management and live upload stay
+//! in the parent `native_screen` module and the `live_upload` sibling.
+
+use super::*;
+use screencapturekit::error::SCError;
+use screencapturekit::stream::delegate_trait::SCStreamDelegateTrait;
+
+/// `AVAssetWriter.status` raw value for `.completed`.
+const AV_WRITER_STATUS_COMPLETED: i64 = 2;
+/// `kAudioFormatMPEG4AAC` FourCC ('aac ') for the writer's audio output.
+const AUDIO_FORMAT_AAC: i64 = 0x6161_6320;
+/// Cadence of delegate-produced output segments in segmented mode (seconds of
+/// media time). Smaller = data becomes uploadable sooner, at a small
+/// container-overhead cost.
+const OUTPUT_SEGMENT_INTERVAL_SECONDS: i64 = 1;
+/// Capture-time H.264 budget in bits per pixel per frame. 0.15 bpp matches
+/// Cap's "instant" quality tier (~3.3 Mbps at 1280x720@24) and keeps most
+/// recordings small enough to upload without a post-capture transcode.
+const CAPTURE_VIDEO_BPP: f64 = 0.15;
+
+// Self-healing capture watchdog. ScreenCaptureKit can silently stop feeding a
+// display stream when the captured display changes Spaces (virtual desktops),
+// a full-screen app takes over, or the display config changes — sometimes with
+// a `did_stop_with_error` callback, sometimes by just going quiet. Either way
+// the recording file stops growing with no app-level signal. The watchdog
+// notices the gap and rebuilds the SCStream in place so recording continues.
+//
+// How long without any delivered sample buffer before we treat the stream as
+// dead and rebuild it. Generous enough not to trip on a momentarily idle
+// screen (SCK still delivers idle frames, which count as activity here).
+const CAPTURE_STALL_TIMEOUT: Duration = Duration::from_secs(4);
+// Watchdog poll cadence.
+const CAPTURE_WATCHDOG_POLL: Duration = Duration::from_millis(1000);
+// Consecutive failed restarts (rebuild or start error, or an immediate
+// re-stall) before giving up and finalizing whatever was captured. A single
+// successful stretch of frames resets the counter.
+const CAPTURE_MAX_RESTARTS: u32 = 5;
+
+/// Liveness state shared between the SCK output handler (which records that a
+/// sample arrived), the stream delegate (which records an OS-reported stop),
+/// and the watchdog thread (which reads both to decide when to rebuild the
+/// stream).
+pub(crate) struct CaptureWatch {
+    /// Wall-clock time of the most recent delivered sample buffer.
+    last_activity: Mutex<Instant>,
+    /// Set by the stream delegate when ScreenCaptureKit reports the stream
+    /// stopped. Consumed by the watchdog to force an immediate rebuild.
+    stream_stopped: Mutex<Option<String>>,
+    /// The user stopped capture through macOS itself (menu-bar "Stop
+    /// Sharing", SCStreamError code -3817). The watchdog must treat this as
+    /// a clean stop request, never as a failure to rebuild from.
+    user_stopped: AtomicBool,
+    /// True between pause and resume. The capture source (SCStream) is
+    /// intentionally stopped while the writer/file/uploader stay alive, so
+    /// the watchdog must not read the silence as a stall and rebuild — resume
+    /// brings a fresh stream back and clears this.
+    paused: AtomicBool,
+}
+
+impl CaptureWatch {
+    fn new() -> Self {
+        Self {
+            last_activity: Mutex::new(Instant::now()),
+            stream_stopped: Mutex::new(None),
+            user_stopped: AtomicBool::new(false),
+            paused: AtomicBool::new(false),
+        }
+    }
+
+    fn note_activity(&self) {
+        if let Ok(mut guard) = self.last_activity.lock() {
+            *guard = Instant::now();
+        }
+    }
+
+    fn since_activity(&self) -> Duration {
+        self.last_activity
+            .lock()
+            .map(|t| t.elapsed())
+            .unwrap_or_default()
+    }
+
+    fn note_stream_stopped(&self, reason: String) {
+        if let Ok(mut guard) = self.stream_stopped.lock() {
+            if guard.is_none() {
+                *guard = Some(reason);
+            }
+        }
+    }
+
+    fn take_stream_stopped(&self) -> Option<String> {
+        self.stream_stopped.lock().ok().and_then(|mut g| g.take())
+    }
+
+    fn note_user_stopped(&self) {
+        self.user_stopped.store(true, Ordering::SeqCst);
+    }
+
+    fn user_stopped(&self) -> bool {
+        self.user_stopped.load(Ordering::SeqCst)
+    }
+
+    fn set_paused(&self, paused: bool) {
+        self.paused.store(paused, Ordering::SeqCst);
+    }
+
+    fn is_paused(&self) -> bool {
+        self.paused.load(Ordering::SeqCst)
+    }
+}
+
+// ---------------------------------------------------------------------------
+// Segmented output (live-upload mode)
+//
+// With `movieFragmentInterval` + a writer-owned file, `finishWriting`
+// DEFRAGMENTS the file in place (fragmented layout -> classic mdat+moov), so
+// byte ranges streamed to the server during recording no longer match the
+// final file and the uploaded clip comes back corrupt. The fix is Apple's
+// segment API: the writer is created WITHOUT an output URL, produces discrete
+// fMP4 segments through `AVAssetWriterDelegate`, and WE append them to the
+// local file ourselves. AVFoundation never owns the file, so nothing is ever
+// rewritten — the file is append-only by construction and the live uploader
+// can safely tail it forever.
+// ---------------------------------------------------------------------------
+
+/// Owns the local recording file in segmented mode. The ObjC delegate appends
+/// every segment it receives; append order matches delivery order (delegate
+/// callbacks are serial, and the file mutex serializes any stragglers).
+pub(super) struct SegmentSink {
+    file: Mutex<std::fs::File>,
+    /// First write error, if any; surfaced by `finish()` so a failing disk
+    /// turns into a reported error instead of a silently truncated file.
+    failed: Mutex<Option<String>>,
+    segments: AtomicU64,
+}
+
+impl SegmentSink {
+    fn create(path: &Path) -> Result<Arc<Self>, String> {
+        let file = std::fs::File::create(path)
+            .map_err(|e| format!("could not create recording file {}: {e}", path.display()))?;
+        Ok(Arc::new(Self {
+            file: Mutex::new(file),
+            failed: Mutex::new(None),
+            segments: AtomicU64::new(0),
+        }))
+    }
+
+    fn append(&self, bytes: &[u8]) {
+        use std::io::Write;
+        let Ok(mut file) = self.file.lock() else {
+            return;
+        };
+        if let Err(err) = file.write_all(bytes) {
+            if let Ok(mut failed) = self.failed.lock() {
+                if failed.is_none() {
+                    eprintln!("[mixer] segment write failed: {err}");
+                    *failed = Some(format!("segment write failed: {err}"));
+                }
+            }
+            return;
+        }
+        let n = self.segments.fetch_add(1, Ordering::Relaxed) + 1;
+        if n == 1 {
+            eprintln!(
+                "[mixer] first output segment written ({} bytes)",
+                bytes.len()
+            );
+        }
+    }
+
+    fn failure(&self) -> Option<String> {
+        self.failed.lock().ok().and_then(|guard| guard.clone())
+    }
+}
+
+/// Instance variables for the segment delegate: just the shared sink.
+struct SegmentDelegateIvars {
+    sink: Arc<SegmentSink>,
+}
+
+objc2::define_class!(
+    // SAFETY: NSObject has no subclassing requirements and the type has no
+    // Drop impl. Methods are called by AVFoundation on its own serial queue.
+    #[unsafe(super(objc2::runtime::NSObject))]
+    #[name = "ClipsSegmentWriterDelegate"]
+    #[ivars = SegmentDelegateIvars]
+    struct SegmentWriterDelegate;
+
+    impl SegmentWriterDelegate {
+        /// `AVAssetWriterDelegate` — receives each fMP4 segment (type 1 =
+        /// initialization, 2 = separable media) as it is produced.
+        #[unsafe(method(assetWriter:didOutputSegmentData:segmentType:))]
+        fn did_output_segment(
+            &self,
+            _writer: *mut objc2::runtime::AnyObject,
+            data: *mut objc2::runtime::AnyObject,
+            _segment_type: isize,
+        ) {
+            // Crossing the ObjC boundary: a Rust panic here would abort the
+            // whole process, so contain it.
+            let _ = std::panic::catch_unwind(std::panic::AssertUnwindSafe(|| {
+                if data.is_null() {
+                    return;
+                }
+                let (ptr, len): (*const std::ffi::c_void, usize) = unsafe {
+                    (
+                        objc2::msg_send![&*data, bytes],
+                        objc2::msg_send![&*data, length],
+                    )
+                };
+                if ptr.is_null() || len == 0 {
+                    return;
+                }
+                let bytes = unsafe { std::slice::from_raw_parts(ptr as *const u8, len) };
+                use objc2::DefinedClass;
+                self.ivars().sink.append(bytes);
+            }));
+        }
+    }
+);
+
+impl SegmentWriterDelegate {
+    fn new(sink: Arc<SegmentSink>) -> objc2::rc::Retained<Self> {
+        use objc2::AllocAnyThread;
+        let this = Self::alloc().set_ivars(SegmentDelegateIvars { sink });
+        unsafe { objc2::msg_send![super(this), init] }
+    }
+}
+
+/// Cheap-to-clone handle around one `AVAssetWriter` producing a fragmented
+/// MP4. SCK callbacks append through it from multiple dispatch queues; the
+/// stop path calls [`Self::finish`]. All clones share the same underlying
+/// state (everything inside is an `Arc`).
+pub(crate) struct CustomScreenCaptureWriter {
+    inner: Arc<Mutex<CustomScreenCaptureWriterState>>,
+    /// Present only in live-mixing mode; combines the two incoming audio
+    /// streams into the one track written to `mixed_audio_input`. Lives on its
+    /// own lock so PCM mixing on the audio callbacks never blocks video frame
+    /// appends (which only need `inner`). Lock order is always `mixer` →
+    /// `inner`; never take `mixer` while holding `inner`.
+    mixer: Option<Arc<Mutex<LiveAudioMixer>>>,
+    /// The writer session has started (first video frame ran
+    /// `startSessionAtSourceTime:`). Written under the `inner` lock, read
+    /// lock-free by the audio callbacks.
+    started: Arc<AtomicBool>,
+    /// Source-time (seconds, as f64 bits) the writer session started at.
+    /// `f64::NAN` until known; mixed audio earlier than this must be dropped
+    /// or the writer rejects it. Written before `started` flips true.
+    session_start_bits: Arc<AtomicU64>,
+    /// Once true the writer accepts no more samples — set on stop, cancel, and
+    /// any append failure.
+    appends_closed: Arc<AtomicBool>,
+    /// Samples skipped because an AVAssetWriterInput wasn't ready; logged
+    /// periodically so realtime backpressure is visible.
+    dropped_samples: Arc<AtomicU64>,
+    /// Accumulated pause time (seconds, as f64 bits) to subtract from the
+    /// zero-based session timeline so a pause/resume leaves no gap in the
+    /// append-only file. Zero until the first resume. Read by the video
+    /// retime path and the live audio mixer.
+    pause_offset_bits: Arc<AtomicU64>,
+}
+
+/// The lock-guarded half of the writer: the retained AVFoundation objects
+/// plus lifecycle flags. Every Objective-C call on these handles happens
+/// while holding this state's mutex (see the SAFETY note below).
+struct CustomScreenCaptureWriterState {
+    writer: objc2::rc::Retained<objc2::runtime::AnyObject>,
+    video_input: objc2::rc::Retained<objc2::runtime::AnyObject>,
+    system_audio_input: Option<objc2::rc::Retained<objc2::runtime::AnyObject>>,
+    mic_audio_input: Option<objc2::rc::Retained<objc2::runtime::AnyObject>>,
+    /// Single output track used when mic + system audio are mixed live into one
+    /// stream. Mutually exclusive with `system_audio_input` / `mic_audio_input`.
+    mixed_audio_input: Option<objc2::rc::Retained<objc2::runtime::AnyObject>>,
+    /// Segmented (delegate-fed) output mode; see the "Segmented output"
+    /// section. When true, `initialSegmentStartTime` must be set before
+    /// `startWriting`.
+    segmented: bool,
+    /// Local-file writer for segmented mode (we own the file, not
+    /// AVFoundation). `None` in plain file mode.
+    segment_sink: Option<Arc<SegmentSink>>,
+    /// Keeps the ObjC delegate alive — `AVAssetWriter.delegate` is weak.
+    #[allow(dead_code)]
+    segment_delegate: Option<objc2::rc::Retained<SegmentWriterDelegate>>,
+    /// First video frame's PTS as (value, timescale). In segmented mode the
+    /// writer session starts at ZERO and every sample is rebased against this
+    /// — the segment API preserves source timestamps verbatim, so appending
+    /// raw host-clock PTS would give the clip a media timeline starting at
+    /// "seconds since boot" (browsers then show wall-clock-like times).
+    session_start_time: Option<(i64, i32)>,
+    finished: bool,
+    failed: Option<String>,
+}
+
+// SAFETY: `Retained<AnyObject>` is `!Send`/`!Sync` by default because objc2
+// cannot know an arbitrary object's threading contract. Here every
+// Objective-C call on the retained writer/input handles (`startWriting`,
+// `startSessionAtSourceTime:`, `appendSampleBuffer:`, `markAsFinished`,
+// `finishWriting…`, `status`/`error` reads) happens while holding the `inner`
+// mutex, so access is serialized even though callbacks arrive on multiple SCK
+// dispatch queues. The remaining shared fields are lock-free atomics
+// (`started`, `session_start_bits`, `appends_closed`, `dropped_samples`), and
+// the mixer holds no Objective-C state and lives behind its own mutex.
+// Objective-C retain/release itself is atomic, so moving the retained
+// pointers across threads is sound.
+unsafe impl Send for CustomScreenCaptureWriter {}
+unsafe impl Sync for CustomScreenCaptureWriter {}
+unsafe impl Send for CustomScreenCaptureWriterState {}
+
+#[derive(Clone)]
+/// The `SCStreamOutputTrait` sink registered for all three output types
+/// (screen / system audio / microphone). One instance is shared across the
+/// registrations and across watchdog stream rebuilds, so the same writer
+/// keeps receiving samples over the whole recording.
+struct CustomScreenCaptureOutputHandler {
+    writer: CustomScreenCaptureWriter,
+    recording_enabled: Arc<AtomicBool>,
+    mic_ready: Option<Arc<AtomicBool>>,
+    watch: Arc<CaptureWatch>,
+}
+
+impl Clone for CustomScreenCaptureWriter {
+    fn clone(&self) -> Self {
+        Self {
+            inner: Arc::clone(&self.inner),
+            mixer: self.mixer.clone(),
+            started: Arc::clone(&self.started),
+            session_start_bits: Arc::clone(&self.session_start_bits),
+            appends_closed: Arc::clone(&self.appends_closed),
+            dropped_samples: Arc::clone(&self.dropped_samples),
+            pause_offset_bits: Arc::clone(&self.pause_offset_bits),
+        }
+    }
+}
+
+impl SCStreamOutputTrait for CustomScreenCaptureOutputHandler {
+    fn did_output_sample_buffer(
+        &self,
+        sample_buffer: screencapturekit::cm::CMSampleBuffer,
+        of_type: SCStreamOutputType,
+    ) {
+        if matches!(of_type, SCStreamOutputType::Microphone) {
+            if let Some(mic_ready) = &self.mic_ready {
+                mic_ready.store(true, Ordering::Relaxed);
+            }
+        }
+        if !self.recording_enabled.load(Ordering::SeqCst) {
+            return;
+        }
+        // A delivered buffer (even a content-less idle frame) proves the stream
+        // is still alive; record it so the watchdog can tell a genuinely stalled
+        // stream apart from a quiet one.
+        self.watch.note_activity();
+        if self.writer.appends_closed.load(Ordering::SeqCst) {
+            return;
+        }
+        // Append every screen frame that carries an image buffer, INCLUDING
+        // idle/blank ones. On a static screen (e.g. after switching to another
+        // Space) ScreenCaptureKit delivers Idle frames; dropping them starves
+        // the video track, and fragmented-MP4 interleaving then can't complete
+        // a fragment — the file stops growing even though audio keeps flowing.
+        // Idle frames still reference the current surface, and the encoder
+        // turns repeats into tiny P-frames, so appending them is cheap. Only
+        // frames with no image buffer are skipped (nothing to encode).
+        if matches!(of_type, SCStreamOutputType::Screen) {
+            use std::sync::atomic::AtomicU64;
+            static SCREEN_SEEN: AtomicU64 = AtomicU64::new(0);
+            static SCREEN_BUFFERLESS: AtomicU64 = AtomicU64::new(0);
+            let seen = SCREEN_SEEN.fetch_add(1, Ordering::Relaxed) + 1;
+            if sample_buffer.image_buffer().is_none() {
+                let skipped = SCREEN_BUFFERLESS.fetch_add(1, Ordering::Relaxed) + 1;
+                if skipped == 1 || skipped % 100 == 0 {
+                    eprintln!(
+                        "[mixer] screen frame without image buffer skipped ({skipped} so far, status={:?})",
+                        sample_buffer.frame_status()
+                    );
+                }
+                return;
+            }
+            if seen == 1 || seen % 512 == 0 {
+                eprintln!(
+                    "[mixer] screen frames delivered: seen={seen} bufferless={} status_now={:?}",
+                    SCREEN_BUFFERLESS.load(Ordering::Relaxed),
+                    sample_buffer.frame_status()
+                );
+            }
+        }
+        // ScreenCaptureKit invokes this from its own dispatch queues through an
+        // Objective-C boundary. Two failure modes can abort the whole process:
+        //   - an Objective-C exception (e.g. AVFoundation), which `catch_unwind`
+        //     CANNOT catch ("Rust cannot catch foreign exceptions"), so we wrap
+        //     the body in `objc2::exception::catch` first; and
+        //   - a Rust panic, contained by the outer `catch_unwind`.
+        // Either way we log the cause and cancel the capture instead of dying.
+        let panic_result = std::panic::catch_unwind(std::panic::AssertUnwindSafe(|| {
+            let exc_result = objc2::exception::catch(std::panic::AssertUnwindSafe(|| {
+                self.writer.append_sample(&sample_buffer, of_type);
+            }));
+            if let Err(exc) = exc_result {
+                let detail = describe_objc_exception(exc);
+                eprintln!(
+                    "[mixer] append_sample raised Objective-C exception for {of_type:?}: {detail}; cancelling capture"
+                );
+                self.writer.appends_closed.store(true, Ordering::SeqCst);
+            }
+        }));
+        if panic_result.is_err() {
+            eprintln!("[mixer] panic while appending {of_type:?} sample; cancelling capture");
+            self.writer.appends_closed.store(true, Ordering::SeqCst);
+        }
+    }
+}
+
+impl CustomScreenCaptureWriter {
+    /// Build the `AVAssetWriter` + inputs for one recording file. With live
+    /// mixing (mic + system) a single mixed audio track is created;
+    /// otherwise each captured source gets its own track. In live-upload
+    /// mode the writer produces movie fragments (append-only file); without
+    /// it, a regular MP4 with faststart.
+    fn new(
+        output_path: &Path,
+        width: u32,
+        height: u32,
+        capture_system_audio: bool,
+        include_audio: bool,
+        mix_live: bool,
+    ) -> Result<Self, String> {
+        use objc2::msg_send;
+        use objc2::runtime::AnyObject;
+
+        #[link(name = "AVFoundation", kind = "framework")]
+        extern "C" {
+            static AVFileTypeMPEG4: *const AnyObject;
+            static AVMediaTypeVideo: *const AnyObject;
+            static AVFileTypeProfileMPEG4AppleHLS: *const AnyObject;
+        }
+        // Force-load UniformTypeIdentifiers so the runtime UTType lookup in
+        // segmented mode resolves.
+        #[link(name = "UniformTypeIdentifiers", kind = "framework")]
+        extern "C" {}
+
+        let segmented = crate::remote_flags::current().custom_sck_pipeline_live_upload_enabled;
+        unsafe {
+            let writer_cls = av_class_named("AVAssetWriter")
+                .ok_or_else(|| "AVAssetWriter missing".to_string())?;
+
+            let (writer, segment_sink, segment_delegate) = if segmented {
+                // Segmented mode: the writer has NO output URL. It produces
+                // discrete fMP4 segments through the delegate, and WE append
+                // them to the local file — so the file is append-only by
+                // construction and `finishWriting` cannot defragment/rewrite
+                // it (which would invalidate live-uploaded byte ranges).
+                let ident = av_ns_string_from("public.mpeg-4")
+                    .ok_or_else(|| "NSString for UTType failed".to_string())?;
+                let ut_cls =
+                    av_class_named("UTType").ok_or_else(|| "UTType missing".to_string())?;
+                let ut: *mut AnyObject = msg_send![ut_cls, typeWithIdentifier: &*ident];
+                if ut.is_null() {
+                    return Err("UTType public.mpeg-4 unavailable".into());
+                }
+                let allocated: *mut AnyObject = msg_send![writer_cls, alloc];
+                let writer_raw: *mut AnyObject = msg_send![allocated, initWithContentType: ut];
+                if writer_raw.is_null() {
+                    if !allocated.is_null() {
+                        let _ = objc2::rc::Retained::from_raw(allocated);
+                    }
+                    return Err("AVAssetWriter initWithContentType failed".into());
+                }
+                let writer = objc2::rc::Retained::from_raw(writer_raw)
+                    .ok_or_else(|| "AVAssetWriter retain failed".to_string())?;
+
+                let interval = ObjcCMTime {
+                    value: OUTPUT_SEGMENT_INTERVAL_SECONDS,
+                    timescale: 1,
+                    flags: 1,
+                    epoch: 0,
+                };
+                let _: () = msg_send![&*writer, setPreferredOutputSegmentInterval: interval];
+                let _: () =
+                    msg_send![&*writer, setOutputFileTypeProfile: AVFileTypeProfileMPEG4AppleHLS];
+
+                let sink = SegmentSink::create(output_path)?;
+                let delegate = SegmentWriterDelegate::new(Arc::clone(&sink));
+                // `AVAssetWriter.delegate` is weak — the Retained delegate is
+                // stored in the writer state to keep it alive.
+                let _: () = msg_send![&*writer, setDelegate: &*delegate];
+                (writer, Some(sink), Some(delegate))
+            } else {
+                // Plain file mode: AVFoundation owns the file; faststart is
+                // safe because nothing tails the file during recording.
+                let url = av_file_url(output_path).ok_or_else(|| {
+                    format!("could not build output URL for {}", output_path.display())
+                })?;
+                let allocated: *mut AnyObject = msg_send![writer_cls, alloc];
+                let mut err_ptr: *mut AnyObject = std::ptr::null_mut();
+                let writer_raw: *mut AnyObject = msg_send![
+                    allocated,
+                    initWithURL: &*url,
+                    fileType: AVFileTypeMPEG4,
+                    error: &mut err_ptr
+                ];
+                if writer_raw.is_null() {
+                    let detail = av_error_suffix(err_ptr);
+                    if !allocated.is_null() {
+                        let _ = objc2::rc::Retained::from_raw(allocated);
+                    }
+                    return Err(format!("AVAssetWriter init failed{detail}"));
+                }
+                let writer = objc2::rc::Retained::from_raw(writer_raw)
+                    .ok_or_else(|| "AVAssetWriter retain failed".to_string())?;
+                let _: () = msg_send![&*writer, setShouldOptimizeForNetworkUse: true];
+                (writer, None, None)
+            };
+            let input_cls = av_class_named("AVAssetWriterInput")
+                .ok_or_else(|| "AVAssetWriterInput missing".to_string())?;
+            let video_settings = av_video_output_settings(width, height)?;
+            let video_raw: *mut AnyObject = msg_send![
+                input_cls,
+                assetWriterInputWithMediaType: AVMediaTypeVideo,
+                outputSettings: &*video_settings
+            ];
+            if video_raw.is_null() {
+                return Err("AVAssetWriterInput video allocation failed".into());
+            }
+            let video_input = objc2::rc::Retained::retain(video_raw)
+                .ok_or_else(|| "AVAssetWriterInput video retain failed".to_string())?;
+            let _: () = msg_send![&*video_input, setExpectsMediaDataInRealTime: true];
+            let can_add_video: bool = msg_send![&*writer, canAddInput: &*video_input];
+            if !can_add_video {
+                return Err("AVAssetWriter cannot add video input".into());
+            }
+            let _: () = msg_send![&*writer, addInput: &*video_input];
+
+            // Live-mixing mode writes one combined audio track; otherwise each
+            // captured source gets its own track (mixed later by ffmpeg, or
+            // left as the single captured source).
+            let (system_audio_input, mic_audio_input, mixed_audio_input, mixer) = if mix_live {
+                let mixed = av_make_audio_writer_input(input_cls, &writer)?;
+                (
+                    None,
+                    None,
+                    Some(mixed),
+                    Some(LiveAudioMixer::new(segmented)?),
+                )
+            } else {
+                let system_audio_input = if capture_system_audio {
+                    Some(av_make_audio_writer_input(input_cls, &writer)?)
+                } else {
+                    None
+                };
+                let mic_audio_input = if include_audio {
+                    Some(av_make_audio_writer_input(input_cls, &writer)?)
+                } else {
+                    None
+                };
+                (system_audio_input, mic_audio_input, None, None)
+            };
+
+            Ok(Self {
+                inner: Arc::new(Mutex::new(CustomScreenCaptureWriterState {
+                    writer,
+                    video_input,
+                    system_audio_input,
+                    mic_audio_input,
+                    mixed_audio_input,
+                    segmented,
+                    segment_sink,
+                    segment_delegate,
+                    session_start_time: None,
+                    finished: false,
+                    failed: None,
+                })),
+                mixer: mixer.map(|m| Arc::new(Mutex::new(m))),
+                started: Arc::new(AtomicBool::new(false)),
+                session_start_bits: Arc::new(AtomicU64::new(f64::NAN.to_bits())),
+                appends_closed: Arc::new(AtomicBool::new(false)),
+                dropped_samples: Arc::new(AtomicU64::new(0)),
+                pause_offset_bits: Arc::new(AtomicU64::new(0.0_f64.to_bits())),
+            })
+        }
+    }
+
+    /// Whether the writer runs the segmented (zero-based, append-only) output
+    /// used by live upload. Only that mode rebases sample timestamps, so it's
+    /// the only mode where a fresh SCStream can be spliced onto the same file.
+    pub(super) fn segmented(&self) -> bool {
+        self.inner.lock().map(|g| g.segmented).unwrap_or(false)
+    }
+
+    /// Whether the writer session has begun (first video frame appended).
+    pub(super) fn is_started(&self) -> bool {
+        self.started.load(Ordering::SeqCst)
+    }
+
+    /// Accumulated pause offset in seconds. Every appended sample skips this
+    /// much wall-clock time so a pause/resume leaves no gap in the file.
+    pub(super) fn pause_offset(&self) -> f64 {
+        f64::from_bits(self.pause_offset_bits.load(Ordering::SeqCst))
+    }
+
+    /// Set the accumulated pause offset (clamped to non-negative). Resume reads
+    /// the prior value, applies `prior + paused_for` once the replacement stream
+    /// is about to start, and restores the prior value if startup fails — so a
+    /// failed-then-retried resume never double-counts the same pause.
+    pub(super) fn set_pause_offset(&self, seconds: f64) {
+        self.pause_offset_bits
+            .store(seconds.max(0.0).to_bits(), Ordering::SeqCst);
+    }
+
+    /// Route one SCK sample buffer to the right writer input. Mixed-mode
+    /// audio goes through [`Self::append_mixed_audio`] (no writer lock while
+    /// decoding); everything else appends directly under the `inner` lock.
+    /// The first video frame starts the writer session.
+    fn append_sample(
+        &self,
+        sample: &screencapturekit::cm::CMSampleBuffer,
+        of_type: SCStreamOutputType,
+    ) {
+        // Live-mixing mode: mic + system audio are combined into one track
+        // before being written, instead of going to separate inputs. Handled
+        // before taking the writer lock — the decode/resample/mix work happens
+        // on the audio callbacks and must not delay video frame appends.
+        if self.mixer.is_some()
+            && matches!(
+                of_type,
+                SCStreamOutputType::Audio | SCStreamOutputType::Microphone
+            )
+        {
+            self.append_mixed_audio(sample, of_type);
+            return;
+        }
+
+        let Ok(mut guard) = self.inner.lock() else {
+            return;
+        };
+        if guard.finished || guard.failed.is_some() {
+            return;
+        }
+        let input = match of_type {
+            SCStreamOutputType::Screen => Some(guard.video_input.clone()),
+            SCStreamOutputType::Audio => guard.system_audio_input.clone(),
+            SCStreamOutputType::Microphone => guard.mic_audio_input.clone(),
+        };
+        let Some(input) = input else {
+            return;
+        };
+        let timing = match sample.sample_timing_info(0) {
+            Ok(timing) if timing.presentation_time_stamp.is_valid() => timing,
+            _ => return,
+        };
+
+        unsafe {
+            if !self.ensure_session_started(&mut guard, timing.presentation_time_stamp) {
+                return;
+            }
+            if guard.segmented {
+                // Segmented mode runs a ZERO-based session timeline: append a
+                // copy with PTS/DTS rebased against the session start.
+                // Appending the raw buffer here would put host-clock times in
+                // the track — the writer then buffers/starves (frozen video)
+                // and browsers show wall-clock timestamps.
+                let Some(base) = guard.session_start_time else {
+                    return;
+                };
+                let pause_offset = self.pause_offset();
+                match retimed_sample_copy(sample, &timing, base, pause_offset) {
+                    Ok(copy) => {
+                        self.append_sample_ptr(&mut guard, &input, copy.as_ptr());
+                    }
+                    Err(err) => {
+                        drop(guard);
+                        self.fail(format!("sample retime failed: {err}"));
+                    }
+                }
+            } else {
+                self.append_sample_ptr(&mut guard, &input, sample.as_ptr());
+            }
+        }
+    }
+
+    /// Pull PCM out of an audio sample, push it into the mixer, then append any
+    /// mixed buffers the mixer is ready to emit. The session is started by the
+    /// video track, so emitted audio is held until that happens.
+    ///
+    /// Locking: PCM decode + resample run with no lock held; timeline placement
+    /// and draining run under the mixer lock, which stays held through the
+    /// appends below so two concurrently-draining audio callbacks can't
+    /// interleave out-of-PTS-order appends; the writer (`inner`) lock is taken
+    /// last, only around the actual appends.
+    fn append_mixed_audio(
+        &self,
+        sample: &screencapturekit::cm::CMSampleBuffer,
+        of_type: SCStreamOutputType,
+    ) {
+        let (source, label) = match of_type {
+            SCStreamOutputType::Audio => (MixSource::System, "system"),
+            SCStreamOutputType::Microphone => (MixSource::Mic, "mic"),
+            _ => return,
+        };
+        // Heavy part (decode + resample) — pure function of the sample.
+        let Some((interleaved, pts_seconds)) = extract_interleaved_stereo(sample, label) else {
+            return;
+        };
+
+        let Some(mixer) = self.mixer.as_ref() else {
+            return;
+        };
+        let Ok(mut mixer_guard) = mixer.lock() else {
+            return;
+        };
+        mixer_guard.set_pause_offset(self.pause_offset());
+        mixer_guard.push(source, &interleaved, pts_seconds);
+        if !self.started.load(Ordering::SeqCst) {
+            return;
+        }
+        let start_secs = f64::from_bits(self.session_start_bits.load(Ordering::SeqCst));
+        if !start_secs.is_nan() {
+            mixer_guard.set_min_start(start_secs);
+        }
+        let emitted = match mixer_guard.drain_ready(false) {
+            Ok(buffers) => buffers,
+            Err(err) => {
+                drop(mixer_guard);
+                self.fail(err);
+                return;
+            }
+        };
+        if emitted.is_empty() {
+            return;
+        }
+
+        let Ok(mut guard) = self.inner.lock() else {
+            return;
+        };
+        if guard.finished || guard.failed.is_some() {
+            return;
+        }
+        let Some(input) = guard.mixed_audio_input.clone() else {
+            return;
+        };
+        for buffer in &emitted {
+            unsafe {
+                self.append_sample_ptr(&mut guard, &input, buffer.as_ptr());
+            }
+            if guard.failed.is_some() {
+                break;
+            }
+        }
+    }
+
+    /// Close the writer to further samples and record the failure reason.
+    fn fail(&self, err: String) {
+        self.appends_closed.store(true, Ordering::SeqCst);
+        if let Ok(mut guard) = self.inner.lock() {
+            if guard.failed.is_none() {
+                guard.failed = Some(err);
+            }
+        }
+    }
+
+    /// Start the writer session at the first video frame's PTS (once). Also
+    /// publishes the session start time to the lock-free atomics the audio
+    /// path reads. Returns false (and records the failure) if AVFoundation
+    /// refuses to start.
+    unsafe fn ensure_session_started(
+        &self,
+        guard: &mut CustomScreenCaptureWriterState,
+        pts: screencapturekit::cm::CMTime,
+    ) -> bool {
+        use objc2::msg_send;
+
+        if self.started.load(Ordering::SeqCst) {
+            return true;
+        }
+        // `startWriting` / `startSessionAtSourceTime:` can raise Objective-C
+        // exceptions (e.g. invalid state). Catch them so they don't abort the
+        // process from inside the realtime callback.
+        let writer_ptr = &*guard.writer as *const objc2::runtime::AnyObject;
+        let segmented = guard.segmented;
+        // Segmented mode: the session runs on a ZERO-based timeline and every
+        // appended sample is rebased (see `session_start_time`). Plain file
+        // mode keeps the source clock — `startSessionAtSourceTime:` writes an
+        // implicit edit so playback still starts at zero there.
+        let start = if segmented {
+            ObjcCMTime {
+                value: 0,
+                timescale: pts.timescale.max(1),
+                flags: 1,
+                epoch: 0,
+            }
+        } else {
+            ObjcCMTime::from(pts)
+        };
+        let outcome = objc2::exception::catch(std::panic::AssertUnwindSafe(|| unsafe {
+            // Segmented output requires the initial segment start time to be
+            // set before writing starts; it must equal the session start.
+            if segmented {
+                let _: () = msg_send![&*writer_ptr, setInitialSegmentStartTime: start];
+            }
+            let ok: bool = msg_send![&*writer_ptr, startWriting];
+            if !ok {
+                return false;
+            }
+            let _: () = msg_send![&*writer_ptr, startSessionAtSourceTime: start];
+            true
+        }));
+        match outcome {
+            Ok(true) => {
+                guard.session_start_time = Some((pts.value, pts.timescale.max(1)));
+                // Publish the session start time before flipping `started` so
+                // lock-free readers that observe `started == true` always see
+                // a valid start time.
+                if let Some(secs) = pts.as_seconds() {
+                    self.session_start_bits
+                        .store(secs.to_bits(), Ordering::SeqCst);
+                }
+                self.started.store(true, Ordering::SeqCst);
+                true
+            }
+            Ok(false) => {
+                self.appends_closed.store(true, Ordering::SeqCst);
+                guard.failed = Some(format!(
+                    "AVAssetWriter startWriting failed{}",
+                    av_writer_error_suffix(&guard.writer)
+                ));
+                false
+            }
+            Err(exc) => {
+                self.appends_closed.store(true, Ordering::SeqCst);
+                let detail = describe_objc_exception(exc);
+                eprintln!("[mixer] startWriting raised Objective-C exception: {detail}");
+                guard.failed = Some(format!("AVAssetWriter startWriting raised: {detail}"));
+                false
+            }
+        }
+    }
+
+    /// Append one CMSampleBuffer to a writer input, containing Objective-C
+    /// exceptions and recording any failure into `guard.failed`. Skips (and
+    /// counts) samples when the input reports not-ready — realtime capture
+    /// must never block the SCK callback.
+    unsafe fn append_sample_ptr(
+        &self,
+        guard: &mut CustomScreenCaptureWriterState,
+        input: &objc2::rc::Retained<objc2::runtime::AnyObject>,
+        sample_ptr: *mut std::ffi::c_void,
+    ) {
+        use objc2::msg_send;
+
+        let ready: bool = msg_send![&**input, isReadyForMoreMediaData];
+        if !ready {
+            // Realtime mode: skip rather than block the capture callback, but
+            // count and periodically log so sustained backpressure is visible.
+            let dropped = self.dropped_samples.fetch_add(1, Ordering::Relaxed) + 1;
+            if dropped == 1 || dropped % 100 == 0 {
+                eprintln!("[mixer] writer input not ready; dropped {dropped} sample(s) so far");
+            }
+            return;
+        }
+        // `appendSampleBuffer:` throws Objective-C exceptions on bad input
+        // (format/timestamp/state). Those can't be caught by `catch_unwind`
+        // and would abort the app, so contain them here.
+        let input_ptr = &**input as *const objc2::runtime::AnyObject;
+        let outcome = objc2::exception::catch(std::panic::AssertUnwindSafe(|| unsafe {
+            let appended: bool = msg_send![&*input_ptr, appendSampleBuffer: sample_ptr];
+            appended
+        }));
+        match outcome {
+            Ok(true) => {}
+            Ok(false) => {
+                self.appends_closed.store(true, Ordering::SeqCst);
+                guard.failed = Some(format!(
+                    "AVAssetWriter appendSampleBuffer failed{}",
+                    av_writer_error_suffix(&guard.writer)
+                ));
+            }
+            Err(exc) => {
+                self.appends_closed.store(true, Ordering::SeqCst);
+                let detail = describe_objc_exception(exc);
+                eprintln!("[mixer] appendSampleBuffer raised Objective-C exception: {detail}");
+                guard.failed = Some(format!("AVAssetWriter appendSampleBuffer raised: {detail}"));
+            }
+        }
+    }
+
+    /// Stop accepting samples, flush audio still held by the mixer, mark all
+    /// inputs finished, and finalize the file. With `wait_for_finalize` the
+    /// call blocks (bounded) until AVFoundation completes and verifies the
+    /// writer status; without it, finalization completes in the background
+    /// (the fragmented file is already playable up to the last fragment).
+    pub(super) fn finish(&self, wait_for_finalize: bool) -> Result<(), String> {
+        self.appends_closed.store(true, Ordering::SeqCst);
+        let dropped = self.dropped_samples.load(Ordering::Relaxed);
+        eprintln!(
+            "[mixer] writer finish requested (wait={wait_for_finalize}, dropped_samples={dropped})"
+        );
+
+        // Flush any audio still held in the mixer (treating a missing source as
+        // silence) before we tear the writer down. Lock order: mixer → inner.
+        if let Some(mixer) = self.mixer.as_ref() {
+            if self.started.load(Ordering::SeqCst) {
+                let mut mixer_guard = mixer.lock().map_err(|e| e.to_string())?;
+                let start_secs = f64::from_bits(self.session_start_bits.load(Ordering::SeqCst));
+                if !start_secs.is_nan() {
+                    mixer_guard.set_min_start(start_secs);
+                }
+                let emitted = mixer_guard.drain_ready(true);
+                let mut guard = self.inner.lock().map_err(|e| e.to_string())?;
+                if !guard.finished && guard.failed.is_none() {
+                    match emitted {
+                        Ok(buffers) => {
+                            if let Some(input) = guard.mixed_audio_input.clone() {
+                                for buffer in &buffers {
+                                    unsafe {
+                                        self.append_sample_ptr(&mut guard, &input, buffer.as_ptr());
+                                    }
+                                    if guard.failed.is_some() {
+                                        break;
+                                    }
+                                }
+                            }
+                        }
+                        Err(err) => {
+                            guard.failed = Some(err);
+                        }
+                    }
+                }
+            }
+        }
+
+        let (
+            writer,
+            video_input,
+            system_audio_input,
+            mic_audio_input,
+            mixed_audio_input,
+            segment_sink,
+            started,
+            failed,
+        ) = {
+            let mut guard = self.inner.lock().map_err(|e| e.to_string())?;
+            if guard.finished {
+                return guard.failed.clone().map_or(Ok(()), Err);
+            }
+            guard.finished = true;
+            (
+                guard.writer.clone(),
+                guard.video_input.clone(),
+                guard.system_audio_input.clone(),
+                guard.mic_audio_input.clone(),
+                guard.mixed_audio_input.clone(),
+                guard.segment_sink.clone(),
+                self.started.load(Ordering::SeqCst),
+                guard.failed.clone(),
+            )
+        };
+        if let Some(err) = failed {
+            return Err(err);
+        }
+        unsafe {
+            use block2::RcBlock;
+            use objc2::msg_send;
+            use std::sync::mpsc;
+            use std::time::Duration as StdDuration;
+
+            if !started {
+                let _: () = msg_send![&*writer, cancelWriting];
+                return Err("AVAssetWriter received no samples".into());
+            }
+            let _: () = msg_send![&*video_input, markAsFinished];
+            if let Some(input) = system_audio_input.as_ref() {
+                let _: () = msg_send![&**input, markAsFinished];
+            }
+            if let Some(input) = mic_audio_input.as_ref() {
+                let _: () = msg_send![&**input, markAsFinished];
+            }
+            if let Some(input) = mixed_audio_input.as_ref() {
+                let _: () = msg_send![&**input, markAsFinished];
+            }
+
+            let (tx, rx) = mpsc::sync_channel::<()>(1);
+            let block = RcBlock::new(move || {
+                let _ = tx.send(());
+            });
+            let _: () = msg_send![&*writer, finishWritingWithCompletionHandler: &*block];
+            if wait_for_finalize && rx.recv_timeout(StdDuration::from_secs(15)).is_err() {
+                let _: () = msg_send![&*writer, cancelWriting];
+                return Err("AVAssetWriter finalize timed out".into());
+            }
+            if wait_for_finalize {
+                let status: i64 = msg_send![&*writer, status];
+                if status != AV_WRITER_STATUS_COMPLETED {
+                    return Err(format!(
+                        "AVAssetWriter finalize failed (status={status}{})",
+                        av_writer_error_suffix(&writer)
+                    ));
+                }
+            }
+        }
+        // Segmented mode: the delegate delivers the final segment before the
+        // completion handler fires, so by now the local file is complete —
+        // unless a disk write failed along the way.
+        if let Some(sink) = segment_sink.as_ref() {
+            if let Some(err) = sink.failure() {
+                return Err(err);
+            }
+        }
+        eprintln!("[mixer] writer finish completed (wait={wait_for_finalize})");
+        Ok(())
+    }
+}
+
+// ---------------------------------------------------------------------------
+// Live audio mixer
+//
+// Combines the two ScreenCaptureKit audio streams (system + mic) into a single
+// interleaved-stereo track in real time, so the recorded file already has one
+// mixed audio track and no post-recording ffmpeg mixing pass is needed.
+//
+// The hard part is that the two streams arrive on independent callbacks with
+// their own timestamps and can start late (mic warmup) or stall. We place each
+// stream on a shared sample timeline (anchored to the first audio sample),
+// zero-filling gaps, and only emit output up to the point where we have data we
+// trust from every still-active source.
+// ---------------------------------------------------------------------------
+
+/// Frames per emitted mixed buffer (~85ms at 48kHz).
+const MIX_CHUNK_FRAMES: i64 = 4096;
+/// A source with no data for this long stops bounding output (treated as
+/// silent) so one stalled source can't freeze the mixed track.
+const MIX_STALL_TIMEOUT: Duration = Duration::from_millis(250);
+/// How long after mixer creation to keep waiting for a source that hasn't
+/// produced its first buffer (mic warmup); afterwards it counts as absent.
+const MIX_SOURCE_GRACE: Duration = Duration::from_millis(2000);
+const AUDIO_FORMAT_LPCM: u32 = 0x6C70_636D; // 'lpcm'
+const AUDIO_FORMAT_FLAGS_FLOAT_PACKED: u32 = 1 | 8; // float + packed, interleaved, little-endian
+
+#[derive(Clone, Copy, PartialEq, Eq)]
+/// Which capture stream a pushed PCM chunk came from.
+enum MixSource {
+    System,
+    Mic,
+}
+
+/// One source's contiguous PCM ring on the shared output timeline. Gaps
+/// between pushes are zero-filled; consumed frames are dropped from the
+/// front as the mixer emits.
+struct MixerTimeline {
+    /// Absolute frame index (anchor = 0) of `samples[0]`.
+    base_frame: i64,
+    /// Interleaved stereo f32 samples from `base_frame` onward.
+    samples: Vec<f32>,
+    started: bool,
+    last_push: Option<Instant>,
+}
+
+impl MixerTimeline {
+    fn new() -> Self {
+        Self {
+            base_frame: 0,
+            samples: Vec::new(),
+            started: false,
+            last_push: None,
+        }
+    }
+
+    /// One past the last frame this source has data for (absolute index).
+    fn end_frame(&self) -> i64 {
+        self.base_frame + (self.samples.len() / 2) as i64
+    }
+
+    /// Stereo sample at an absolute frame index; silence outside the
+    /// buffered range, so callers never need bounds checks.
+    fn sample_at(&self, frame: i64) -> (f32, f32) {
+        if frame < self.base_frame {
+            return (0.0, 0.0);
+        }
+        let offset = ((frame - self.base_frame) as usize) * 2;
+        if offset + 1 < self.samples.len() {
+            (self.samples[offset], self.samples[offset + 1])
+        } else {
+            (0.0, 0.0)
+        }
+    }
+}
+
+enum SourceBound {
+    /// Started and recently fed; bounds output to `end_frame`.
+    Active(i64),
+    /// Started but no recent data; treat beyond its data as silence.
+    Stalled,
+    /// Not started yet but still within the warmup grace window; hold output.
+    Pending,
+    /// Not started and past grace; treat as silent.
+    Absent,
+}
+
+/// Realtime mic + system mixer. Places each source on a shared 48kHz
+/// stereo timeline anchored at the first audio PTS, then emits summed
+/// chunks up to the point every still-active source has data for. See the
+/// section comment above for the full design rationale.
+struct LiveAudioMixer {
+    format_desc: screencapturekit::cm::CMFormatDescription,
+    sample_rate: i32,
+    /// Subtract the writer session start from emitted PTS (segmented mode,
+    /// where the session timeline is zero-based). Plain file mode keeps
+    /// absolute source time to match `startSessionAtSourceTime:`.
+    rebase_output: bool,
+    /// Session start in source seconds, recorded by `set_min_start`.
+    session_start_seconds: Option<f64>,
+    /// Accumulated pause time (seconds) subtracted from every incoming source
+    /// PTS so a pause/resume leaves no gap on the audio timeline — mirrors the
+    /// video path's `pause_offset`.
+    pause_offset_seconds: f64,
+    anchor_seconds: Option<f64>,
+    out_pos: i64,
+    system: MixerTimeline,
+    mic: MixerTimeline,
+    created_at: Instant,
+}
+
+impl LiveAudioMixer {
+    fn new(rebase_output: bool) -> Result<Self, String> {
+        let sample_rate = AUDIO_OUTPUT_SAMPLE_RATE as i32;
+        let asbd = AudioStreamBasicDescription {
+            sample_rate: AUDIO_OUTPUT_SAMPLE_RATE as f64,
+            format_id: AUDIO_FORMAT_LPCM,
+            format_flags: AUDIO_FORMAT_FLAGS_FLOAT_PACKED,
+            bytes_per_packet: 8,
+            frames_per_packet: 1,
+            bytes_per_frame: 8,
+            channels_per_frame: 2,
+            bits_per_channel: 32,
+            reserved: 0,
+        };
+        let mut desc: *mut std::ffi::c_void = std::ptr::null_mut();
+        let status = unsafe {
+            CMAudioFormatDescriptionCreate(
+                std::ptr::null(),
+                &asbd,
+                0,
+                std::ptr::null(),
+                0,
+                std::ptr::null(),
+                std::ptr::null(),
+                &mut desc,
+            )
+        };
+        if status != 0 || desc.is_null() {
+            return Err(format!(
+                "CMAudioFormatDescriptionCreate failed (status={status})"
+            ));
+        }
+        let format_desc = screencapturekit::cm::CMFormatDescription::from_raw(desc)
+            .ok_or_else(|| "CMAudioFormatDescription wrap failed".to_string())?;
+        Ok(Self {
+            format_desc,
+            sample_rate,
+            rebase_output,
+            session_start_seconds: None,
+            pause_offset_seconds: 0.0,
+            anchor_seconds: None,
+            out_pos: 0,
+            system: MixerTimeline::new(),
+            mic: MixerTimeline::new(),
+            created_at: Instant::now(),
+        })
+    }
+
+    /// Place decoded PCM on the source's timeline at its PTS-derived frame
+    /// position, zero-filling any gap since the previous push (capped so a
+    /// glitched timestamp can't allocate gigabytes).
+    fn push(&mut self, source: MixSource, interleaved: &[f32], pts_seconds: f64) {
+        let frames = interleaved.len() / 2;
+        if frames == 0 {
+            return;
+        }
+        // Collapse the paused gap: pull post-resume audio back onto the
+        // continuous timeline so its frame positions abut the pre-pause data
+        // instead of leaving a silence hole (which `push` would otherwise cap
+        // at `max_gap` and desync from the video track).
+        let pts_seconds = pts_seconds - self.pause_offset_seconds;
+        let anchor = *self.anchor_seconds.get_or_insert(pts_seconds);
+        let frame_index =
+            (((pts_seconds - anchor) * self.sample_rate as f64).round() as i64).max(0);
+        let out_pos = self.out_pos;
+        // Cap silence inserted for a timestamp gap. A glitched/discontinuous
+        // PTS could otherwise compute a multi-billion-frame gap and try to
+        // allocate gigabytes of zeros, aborting the process.
+        let max_gap = self.sample_rate as i64 * 2;
+        let timeline = match source {
+            MixSource::System => &mut self.system,
+            MixSource::Mic => &mut self.mic,
+        };
+        if !timeline.started {
+            timeline.started = true;
+            // Never start behind already-emitted output.
+            timeline.base_frame = frame_index.max(out_pos);
+        }
+        let cur_end = timeline.end_frame();
+        if frame_index > cur_end {
+            let gap = (frame_index - cur_end).min(max_gap) as usize;
+            timeline
+                .samples
+                .extend(std::iter::repeat(0.0_f32).take(gap * 2));
+        }
+        timeline.samples.extend_from_slice(interleaved);
+        timeline.last_push = Some(Instant::now());
+    }
+
+    /// Update the accumulated pause offset (seconds) applied to incoming
+    /// source PTS in `push`. Set from the writer's shared offset on resume.
+    fn set_pause_offset(&mut self, seconds: f64) {
+        self.pause_offset_seconds = seconds;
+    }
+
+    /// Advance the output cursor so we never emit audio earlier than the
+    /// writer session start (the writer rejects samples before it).
+    fn set_min_start(&mut self, start_seconds: f64) {
+        self.session_start_seconds = Some(start_seconds);
+        if let Some(anchor) = self.anchor_seconds {
+            // ceil, not round: rounding down would place the first emitted
+            // sample a fraction of a frame BEFORE the session start, which
+            // AVAssetWriter can reject when it writes the fragment.
+            let floor = (((start_seconds - anchor) * self.sample_rate as f64).ceil() as i64).max(0);
+            if floor > self.out_pos {
+                self.out_pos = floor;
+                self.drain_consumed();
+            }
+        }
+    }
+
+    /// How a source currently bounds output: actively feeding (bound to its
+    /// data end), stalled/absent (ignored), or still warming up (holds all
+    /// output back).
+    fn classify(&self, timeline: &MixerTimeline, now: Instant) -> SourceBound {
+        if !timeline.started {
+            if now.duration_since(self.created_at) < MIX_SOURCE_GRACE {
+                SourceBound::Pending
+            } else {
+                SourceBound::Absent
+            }
+        } else if timeline
+            .last_push
+            .map_or(true, |t| now.duration_since(t) >= MIX_STALL_TIMEOUT)
+        {
+            SourceBound::Stalled
+        } else {
+            SourceBound::Active(timeline.end_frame())
+        }
+    }
+
+    /// The frame up to which mixing is safe: the minimum data end across
+    /// active sources (or everything buffered when flushing at stop).
+    fn compute_safe_end(&self, flush: bool) -> i64 {
+        if flush {
+            return self.system.end_frame().max(self.mic.end_frame());
+        }
+        let now = Instant::now();
+        let sys = self.classify(&self.system, now);
+        let mic = self.classify(&self.mic, now);
+        if matches!(sys, SourceBound::Pending) || matches!(mic, SourceBound::Pending) {
+            // Still expecting a source to start; don't run ahead of it.
+            return self.out_pos;
+        }
+        let mut bound = i64::MAX;
+        let mut any_active = false;
+        for b in [&sys, &mic] {
+            if let SourceBound::Active(end) = b {
+                bound = bound.min(*end);
+                any_active = true;
+            }
+        }
+        if any_active {
+            bound
+        } else {
+            // Everything stalled/absent: drain whatever frozen data we have.
+            self.system.end_frame().max(self.mic.end_frame())
+        }
+    }
+
+    /// Emit mixed sample buffers covering `out_pos..safe_end` in
+    /// `MIX_CHUNK_FRAMES` chunks: sum system + mic per frame, clamp, wrap as
+    /// LPCM `CMSampleBuffer`s with contiguous PTS.
+    fn drain_ready(
+        &mut self,
+        flush: bool,
+    ) -> Result<Vec<screencapturekit::cm::CMSampleBuffer>, String> {
+        if self.anchor_seconds.is_none() {
+            return Ok(Vec::new());
+        }
+        let safe_end = self.compute_safe_end(flush);
+        if safe_end <= self.out_pos {
+            return Ok(Vec::new());
+        }
+        let mut emitted = Vec::new();
+        let mut a = self.out_pos;
+        while a < safe_end {
+            let b = (a + MIX_CHUNK_FRAMES).min(safe_end);
+            let n = (b - a) as usize;
+            let mut interleaved = vec![0.0_f32; n * 2];
+            for f in 0..n {
+                let frame = a + f as i64;
+                let (sl, sr) = self.system.sample_at(frame);
+                let (ml, mr) = self.mic.sample_at(frame);
+                interleaved[f * 2] = (sl + ml).clamp(-1.0, 1.0);
+                interleaved[f * 2 + 1] = (sr + mr).clamp(-1.0, 1.0);
+            }
+            emitted.push(self.build_sample_buffer(&interleaved, a)?);
+            a = b;
+        }
+        self.out_pos = safe_end;
+        self.drain_consumed();
+        Ok(emitted)
+    }
+
+    /// Free PCM below the output cursor from both timelines (already mixed
+    /// and emitted; `sample_at` treats it as silence if ever re-read).
+    fn drain_consumed(&mut self) {
+        let out_pos = self.out_pos;
+        for timeline in [&mut self.system, &mut self.mic] {
+            if out_pos > timeline.base_frame {
+                let drop_frames = (out_pos - timeline.base_frame) as usize;
+                let drop_samples = (drop_frames * 2).min(timeline.samples.len());
+                timeline.samples.drain(0..drop_samples);
+                timeline.base_frame = out_pos;
+            }
+        }
+    }
+
+    /// Wrap raw interleaved f32 PCM as a ready-to-append LPCM
+    /// `CMSampleBuffer` whose PTS continues the mixer's output timeline.
+    fn build_sample_buffer(
+        &self,
+        interleaved: &[f32],
+        start_frame: i64,
+    ) -> Result<screencapturekit::cm::CMSampleBuffer, String> {
+        let frames = interleaved.len() / 2;
+        let bytes = unsafe {
+            std::slice::from_raw_parts(
+                interleaved.as_ptr() as *const u8,
+                std::mem::size_of_val(interleaved),
+            )
+        };
+        let block = screencapturekit::cm::CMBlockBuffer::create(bytes)
+            .ok_or_else(|| "CMBlockBuffer create failed".to_string())?;
+        let anchor = self.anchor_seconds.unwrap_or(0.0);
+        // Zero-based session timeline: emit PTS relative to the session start
+        // (set_min_start guarantees emitted frames are never earlier than it).
+        let base = if self.rebase_output {
+            self.session_start_seconds.unwrap_or(anchor)
+        } else {
+            0.0
+        };
+        let pts_value = ((anchor - base) * self.sample_rate as f64).round() as i64 + start_frame;
+        let pts = ObjcCMTime {
+            value: pts_value,
+            timescale: self.sample_rate,
+            flags: 1,
+            epoch: 0,
+        };
+        let mut out: *mut std::ffi::c_void = std::ptr::null_mut();
+        let status = unsafe {
+            CMAudioSampleBufferCreateReadyWithPacketDescriptions(
+                std::ptr::null(),
+                block.as_ptr(),
+                self.format_desc.as_ptr(),
+                frames as isize,
+                pts,
+                std::ptr::null(),
+                &mut out,
+            )
+        };
+        if status != 0 || out.is_null() {
+            return Err(format!(
+                "CMAudioSampleBufferCreate failed (status={status})"
+            ));
+        }
+        screencapturekit::cm::CMSampleBuffer::from_raw(out)
+            .ok_or_else(|| "CMSampleBuffer wrap failed".to_string())
+    }
+}
+
+/// Decode little-endian f32 samples from a CoreMedia byte buffer. Copies
+/// instead of reinterpreting the pointer: CoreAudio makes no alignment
+/// guarantee, and casting an unaligned `*const u8` to `&[f32]` is undefined
+/// behavior.
+fn bytes_to_f32_vec(bytes: &[u8]) -> Vec<f32> {
+    bytes
+        .chunks_exact(4)
+        .map(|c| f32::from_le_bytes([c[0], c[1], c[2], c[3]]))
+        .collect()
+}
+
+// CoreAudio format flags (AudioFormatFlags).
+const K_AUDIO_FLAG_IS_FLOAT: u32 = 1 << 0;
+const K_AUDIO_FLAG_IS_SIGNED_INT: u32 = 1 << 2;
+
+/// Render a caught Objective-C exception (name + reason) for logging.
+fn describe_objc_exception(
+    exc: Option<objc2::rc::Retained<objc2::exception::Exception>>,
+) -> String {
+    match exc {
+        Some(e) => format!("{e:?}"),
+        None => "unknown Objective-C exception".to_string(),
+    }
+}
+
+/// Read the source stream's `AudioStreamBasicDescription` (rate, channels,
+/// sample format) off a sample buffer; `None` when unavailable.
+fn source_asbd(
+    sample: &screencapturekit::cm::CMSampleBuffer,
+) -> Option<AudioStreamBasicDescription> {
+    let format = sample.format_description()?;
+    let asbd = unsafe { CMAudioFormatDescriptionGetStreamBasicDescription(format.as_ptr()) };
+    if asbd.is_null() {
+        return None;
+    }
+    Some(unsafe { std::ptr::read(asbd) })
+}
+
+/// Decode one audio buffer's raw bytes into f32 samples according to the
+/// stream's sample format (float32/float64 or signed int16/int32).
+fn decode_samples_to_f32(bytes: &[u8], is_float: bool, bits: u32) -> Vec<f32> {
+    match (is_float, bits) {
+        (true, 32) => bytes_to_f32_vec(bytes),
+        (true, 64) => bytes
+            .chunks_exact(8)
+            .map(|c| f64::from_le_bytes(c.try_into().unwrap()) as f32)
+            .collect(),
+        (false, 16) => bytes
+            .chunks_exact(2)
+            .map(|c| i16::from_le_bytes([c[0], c[1]]) as f32 / 32768.0)
+            .collect(),
+        (false, 32) => bytes
+            .chunks_exact(4)
+            .map(|c| i32::from_le_bytes(c.try_into().unwrap()) as f32 / 2_147_483_648.0)
+            .collect(),
+        // Unknown: best-effort treat as float32.
+        _ => bytes_to_f32_vec(bytes),
+    }
+}
+
+/// Resample interleaved-stereo f32 from `src_rate` to `dst_rate` with linear
+/// interpolation. ScreenCaptureKit delivers the microphone at its native rate
+/// (often 44.1 kHz / mono-upmixed), which is not the 48 kHz the mixer assumes;
+/// without this the mic plays back pitch-shifted and unintelligible.
+fn resample_interleaved_stereo(input: &[f32], src_rate: f64, dst_rate: f64) -> Vec<f32> {
+    let in_frames = input.len() / 2;
+    if in_frames == 0 || src_rate <= 0.0 || dst_rate <= 0.0 || (src_rate - dst_rate).abs() < 1.0 {
+        return input.to_vec();
+    }
+    let ratio = dst_rate / src_rate;
+    let out_frames = ((in_frames as f64) * ratio).round() as usize;
+    if out_frames == 0 {
+        return Vec::new();
+    }
+    let mut out = vec![0.0_f32; out_frames * 2];
+    let step = src_rate / dst_rate;
+    for f in 0..out_frames {
+        let pos = f as f64 * step;
+        let i = pos.floor() as usize;
+        let frac = (pos - i as f64) as f32;
+        let i1 = (i + 1).min(in_frames - 1);
+        for ch in 0..2 {
+            let a = input[i * 2 + ch];
+            let b = input[i1 * 2 + ch];
+            out[f * 2 + ch] = a + (b - a) * frac;
+        }
+    }
+    out
+}
+
+fn extract_interleaved_stereo(
+    sample: &screencapturekit::cm::CMSampleBuffer,
+    label: &str,
+) -> Option<(Vec<f32>, f64)> {
+    let frames = sample.num_samples();
+    if frames == 0 {
+        return None;
+    }
+    let timing = sample.sample_timing_info(0).ok()?;
+    let pts_seconds = timing.presentation_time_stamp.as_seconds()?;
+    let abl = sample.audio_buffer_list()?;
+    let num_buffers = abl.num_buffers();
+    if num_buffers == 0 {
+        return None;
+    }
+
+    let asbd = source_asbd(sample);
+    let (is_float, bits, src_rate) = match asbd {
+        Some(a) => {
+            // If neither float nor signed-int is flagged, assume float (SCK default).
+            let is_float = a.format_flags & K_AUDIO_FLAG_IS_FLOAT != 0
+                || a.format_flags & K_AUDIO_FLAG_IS_SIGNED_INT == 0;
+            (is_float, a.bits_per_channel, a.sample_rate)
+        }
+        None => (true, 32, AUDIO_OUTPUT_SAMPLE_RATE as f64),
+    };
+
+    log_audio_format_once(label, &asbd, num_buffers, &abl, frames);
+
+    let mut out = vec![0.0_f32; frames * 2];
+    if num_buffers >= 2 {
+        // Non-interleaved (planar): one channel per buffer.
+        let left = decode_samples_to_f32(abl.get(0)?.data(), is_float, bits);
+        let right = decode_samples_to_f32(abl.get(1)?.data(), is_float, bits);
+        let n = frames.min(left.len()).min(right.len());
+        for i in 0..n {
+            out[i * 2] = left[i];
+            out[i * 2 + 1] = right[i];
+        }
+    } else {
+        let buf = abl.get(0)?;
+        let channels = buf.number_channels.max(1) as usize;
+        let decoded = decode_samples_to_f32(buf.data(), is_float, bits);
+        if channels >= 2 {
+            // Interleaved multi-channel: take the first two channels.
+            let n = frames.min(decoded.len() / channels);
+            for i in 0..n {
+                out[i * 2] = decoded[i * channels];
+                out[i * 2 + 1] = decoded[i * channels + 1];
+            }
+        } else {
+            // Mono: duplicate into both channels.
+            let n = frames.min(decoded.len());
+            for i in 0..n {
+                out[i * 2] = decoded[i];
+                out[i * 2 + 1] = decoded[i];
+            }
+        }
+    }
+
+    // Normalize every source to the mixer's output rate so contiguous placement
+    // on the timeline matches real time (otherwise the mic is pitch-shifted).
+    out = resample_interleaved_stereo(&out, src_rate, AUDIO_OUTPUT_SAMPLE_RATE as f64);
+    Some((out, pts_seconds))
+}
+
+/// Logs the decoded audio format the first time each source is seen, so format
+/// mismatches (rate / channels / int-vs-float / interleaving) are diagnosable.
+fn log_audio_format_once(
+    label: &str,
+    asbd: &Option<AudioStreamBasicDescription>,
+    num_buffers: usize,
+    abl: &screencapturekit::cm::AudioBufferList,
+    frames: usize,
+) {
+    use std::sync::atomic::AtomicBool;
+    static SYS_LOGGED: AtomicBool = AtomicBool::new(false);
+    static MIC_LOGGED: AtomicBool = AtomicBool::new(false);
+    let flag = if label == "mic" {
+        &MIC_LOGGED
+    } else {
+        &SYS_LOGGED
+    };
+    if flag.swap(true, Ordering::SeqCst) {
+        return;
+    }
+    let ch0 = abl.get(0).map(|b| (b.number_channels, b.data_byte_size()));
+    let ch1 = abl.get(1).map(|b| (b.number_channels, b.data_byte_size()));
+    eprintln!(
+        "[mixer] {label} format: asbd={asbd:?} num_buffers={num_buffers} frames={frames} buf0={ch0:?} buf1={ch1:?}"
+    );
+}
+
+/// Mirror of CoreAudio's `AudioStreamBasicDescription` (repr(C) so it can
+/// cross the FFI boundary by value).
+#[repr(C)]
+#[derive(Copy, Clone, Debug)]
+struct AudioStreamBasicDescription {
+    sample_rate: f64,
+    format_id: u32,
+    format_flags: u32,
+    bytes_per_packet: u32,
+    frames_per_packet: u32,
+    bytes_per_frame: u32,
+    channels_per_frame: u32,
+    bits_per_channel: u32,
+    reserved: u32,
+}
+
+/// `CMSampleTimingInfo` mirror for the retiming FFI call.
+#[repr(C)]
+#[derive(Copy, Clone)]
+struct ObjcCMSampleTimingInfo {
+    duration: ObjcCMTime,
+    presentation_time_stamp: ObjcCMTime,
+    decode_time_stamp: ObjcCMTime,
+}
+
+/// Rebase a timestamp onto the zero-based session timeline (subtract the
+/// first video frame's PTS). `pause_offset_seconds` is additionally subtracted
+/// so time spent paused collapses to nothing — the file stays gapless across a
+/// pause/resume. Invalid times pass through untouched.
+fn rebased_time(
+    t: screencapturekit::cm::CMTime,
+    base: (i64, i32),
+    pause_offset_seconds: f64,
+) -> ObjcCMTime {
+    const K_CMTIME_FLAG_VALID: u32 = 1;
+    if t.flags & K_CMTIME_FLAG_VALID == 0 {
+        return ObjcCMTime::from(t);
+    }
+    let (base_value, base_timescale) = base;
+    let base_in_t = if t.timescale == base_timescale {
+        base_value
+    } else {
+        // Convert the base into this timestamp's timescale before subtracting.
+        (i128::from(base_value) * i128::from(t.timescale) / i128::from(base_timescale.max(1)))
+            as i64
+    };
+    // Convert the accumulated pause time into this timestamp's timescale.
+    let pause_in_t = (pause_offset_seconds * f64::from(t.timescale)).round() as i64;
+    ObjcCMTime {
+        value: t.value - base_in_t - pause_in_t,
+        timescale: t.timescale,
+        flags: t.flags,
+        epoch: t.epoch,
+    }
+}
+
+/// Copy a sample buffer with its PTS/DTS rebased onto the session timeline.
+/// One timing entry applies to every sample in the buffer (SCK video buffers
+/// hold one frame; audio buffers have uniform per-sample timing).
+fn retimed_sample_copy(
+    sample: &screencapturekit::cm::CMSampleBuffer,
+    timing: &screencapturekit::cm::CMSampleTimingInfo,
+    base: (i64, i32),
+    pause_offset_seconds: f64,
+) -> Result<screencapturekit::cm::CMSampleBuffer, String> {
+    let new_timing = ObjcCMSampleTimingInfo {
+        duration: ObjcCMTime::from(timing.duration),
+        presentation_time_stamp: rebased_time(
+            timing.presentation_time_stamp,
+            base,
+            pause_offset_seconds,
+        ),
+        decode_time_stamp: rebased_time(timing.decode_time_stamp, base, pause_offset_seconds),
+    };
+    let mut out: *mut std::ffi::c_void = std::ptr::null_mut();
+    let status = unsafe {
+        CMSampleBufferCreateCopyWithNewTiming(
+            std::ptr::null(),
+            sample.as_ptr(),
+            1,
+            &new_timing,
+            &mut out,
+        )
+    };
+    if status != 0 || out.is_null() {
+        return Err(format!(
+            "CMSampleBufferCreateCopyWithNewTiming failed (status={status})"
+        ));
+    }
+    screencapturekit::cm::CMSampleBuffer::from_raw(out)
+        .ok_or_else(|| "retimed CMSampleBuffer wrap failed".to_string())
+}
+
+// CoreMedia C API used to hand-build the mixer's LPCM output buffers —
+// the screencapturekit crate has no constructors for these.
+#[link(name = "CoreMedia", kind = "framework")]
+extern "C" {
+    fn CMAudioFormatDescriptionCreate(
+        allocator: *const std::ffi::c_void,
+        asbd: *const AudioStreamBasicDescription,
+        layout_size: usize,
+        layout: *const std::ffi::c_void,
+        magic_cookie_size: usize,
+        magic_cookie: *const std::ffi::c_void,
+        extensions: *const std::ffi::c_void,
+        format_description_out: *mut *mut std::ffi::c_void,
+    ) -> i32;
+
+    fn CMAudioSampleBufferCreateReadyWithPacketDescriptions(
+        allocator: *const std::ffi::c_void,
+        data_buffer: *mut std::ffi::c_void,
+        format_description: *mut std::ffi::c_void,
+        num_samples: isize,
+        presentation_time_stamp: ObjcCMTime,
+        packet_descriptions: *const std::ffi::c_void,
+        sample_buffer_out: *mut *mut std::ffi::c_void,
+    ) -> i32;
+
+    fn CMAudioFormatDescriptionGetStreamBasicDescription(
+        format_description: *mut std::ffi::c_void,
+    ) -> *const AudioStreamBasicDescription;
+
+    fn CMSampleBufferCreateCopyWithNewTiming(
+        allocator: *const std::ffi::c_void,
+        original: *mut std::ffi::c_void,
+        num_timing_entries: isize,
+        timing_array: *const ObjcCMSampleTimingInfo,
+        sample_buffer_out: *mut *mut std::ffi::c_void,
+    ) -> i32;
+}
+
+/// Mirror of CoreMedia's `CMTime`, with objc2 `Encode` impls so it can be
+/// passed by value through `msg_send!` (e.g. `startSessionAtSourceTime:`,
+/// `setPreferredOutputSegmentInterval:`).
+#[repr(C)]
+#[derive(Copy, Clone)]
+struct ObjcCMTime {
+    value: i64,
+    timescale: i32,
+    flags: u32,
+    epoch: i64,
+}
+
+unsafe impl objc2::encode::RefEncode for ObjcCMTime {
+    const ENCODING_REF: objc2::encode::Encoding =
+        objc2::encode::Encoding::Pointer(&<Self as objc2::encode::Encode>::ENCODING);
+}
+
+unsafe impl objc2::encode::Encode for ObjcCMTime {
+    const ENCODING: objc2::encode::Encoding = objc2::encode::Encoding::Struct(
+        "CMTime",
+        &[
+            <i64 as objc2::encode::Encode>::ENCODING,
+            <i32 as objc2::encode::Encode>::ENCODING,
+            <u32 as objc2::encode::Encode>::ENCODING,
+            <i64 as objc2::encode::Encode>::ENCODING,
+        ],
+    );
+}
+
+impl From<screencapturekit::cm::CMTime> for ObjcCMTime {
+    fn from(value: screencapturekit::cm::CMTime) -> Self {
+        Self {
+            value: value.value,
+            timescale: value.timescale,
+            flags: value.flags,
+            epoch: value.epoch,
+        }
+    }
+}
+
+/// Look up an Objective-C class by name at runtime.
+unsafe fn av_class_named(name: &str) -> Option<&'static objc2::runtime::AnyClass> {
+    let bytes = std::ffi::CString::new(name).ok()?;
+    objc2::runtime::AnyClass::get(&bytes)
+}
+
+/// Build a retained `NSString` from a Rust string.
+unsafe fn av_ns_string_from(s: &str) -> Option<objc2::rc::Retained<objc2::runtime::AnyObject>> {
+    use objc2::runtime::AnyObject;
+    use objc2::{class, msg_send};
+
+    let cstr = std::ffi::CString::new(s).ok()?;
+    let allocated: *mut AnyObject = msg_send![class!(NSString), alloc];
+    if allocated.is_null() {
+        return None;
+    }
+    let inited: *mut AnyObject = msg_send![allocated, initWithUTF8String: cstr.as_ptr()];
+    if inited.is_null() {
+        let _ = objc2::rc::Retained::from_raw(allocated);
+        None
+    } else {
+        objc2::rc::Retained::from_raw(inited)
+    }
+}
+
+/// Build a retained `NSURL` file URL for the writer's output path.
+unsafe fn av_file_url(path: &Path) -> Option<objc2::rc::Retained<objc2::runtime::AnyObject>> {
+    use objc2::runtime::AnyObject;
+    use objc2::{class, msg_send};
+
+    let path_str = path.to_str()?;
+    let nsstr = av_ns_string_from(path_str)?;
+    let url: *mut AnyObject = msg_send![class!(NSURL), fileURLWithPath: &*nsstr];
+    if url.is_null() {
+        None
+    } else {
+        objc2::rc::Retained::retain(url)
+    }
+}
+
+/// Boxed `NSNumber` for integer settings-dictionary values.
+unsafe fn av_number_i64(value: i64) -> Option<objc2::rc::Retained<objc2::runtime::AnyObject>> {
+    use objc2::runtime::AnyObject;
+    use objc2::{class, msg_send};
+
+    let raw: *mut AnyObject = msg_send![class!(NSNumber), numberWithLongLong: value];
+    if raw.is_null() {
+        None
+    } else {
+        objc2::rc::Retained::retain(raw)
+    }
+}
+
+/// Boxed boolean `NSNumber` for settings-dictionary flags.
+unsafe fn av_number_bool(value: bool) -> Option<objc2::rc::Retained<objc2::runtime::AnyObject>> {
+    use objc2::runtime::AnyObject;
+    use objc2::{class, msg_send};
+
+    let raw: *mut AnyObject = msg_send![class!(NSNumber), numberWithBool: value];
+    if raw.is_null() {
+        None
+    } else {
+        objc2::rc::Retained::retain(raw)
+    }
+}
+
+/// Fresh `NSMutableDictionary` for AVFoundation output settings.
+unsafe fn av_dict() -> Result<objc2::rc::Retained<objc2::runtime::AnyObject>, String> {
+    use objc2::runtime::AnyObject;
+    use objc2::{class, msg_send};
+
+    let raw: *mut AnyObject = msg_send![class!(NSMutableDictionary), dictionary];
+    if raw.is_null() {
+        Err("NSMutableDictionary allocation failed".into())
+    } else {
+        objc2::rc::Retained::retain(raw)
+            .ok_or_else(|| "NSMutableDictionary retain failed".to_string())
+    }
+}
+
+/// `dict[key] = value` on an `NSMutableDictionary`.
+unsafe fn av_dict_set(
+    dict: &objc2::runtime::AnyObject,
+    key: *const objc2::runtime::AnyObject,
+    value: &objc2::runtime::AnyObject,
+) {
+    use objc2::msg_send;
+
+    let _: () = msg_send![dict, setObject: value, forKey: key];
+}
+
+/// H.264 output settings for the video writer input, sized to the capture
+/// dimensions and with frame reordering (B-frames) disabled — required for
+/// stable fragmented-MP4 writing (see the comment inside).
+unsafe fn av_video_output_settings(
+    width: u32,
+    height: u32,
+) -> Result<objc2::rc::Retained<objc2::runtime::AnyObject>, String> {
+    use objc2::runtime::AnyObject;
+
+    #[link(name = "AVFoundation", kind = "framework")]
+    extern "C" {
+        static AVVideoCodecKey: *const AnyObject;
+        static AVVideoCodecTypeH264: *const AnyObject;
+        static AVVideoHeightKey: *const AnyObject;
+        static AVVideoWidthKey: *const AnyObject;
+        static AVVideoCompressionPropertiesKey: *const AnyObject;
+        static AVVideoAllowFrameReorderingKey: *const AnyObject;
+        static AVVideoAverageBitRateKey: *const AnyObject;
+        static AVVideoExpectedSourceFrameRateKey: *const AnyObject;
+        static AVVideoMaxKeyFrameIntervalKey: *const AnyObject;
+    }
+
+    let settings = av_dict()?;
+    let width_value =
+        av_number_i64(width as i64).ok_or_else(|| "NSNumber width failed".to_string())?;
+    let height_value =
+        av_number_i64(height as i64).ok_or_else(|| "NSNumber height failed".to_string())?;
+    av_dict_set(&settings, AVVideoCodecKey, &*AVVideoCodecTypeH264);
+    av_dict_set(&settings, AVVideoWidthKey, &width_value);
+    av_dict_set(&settings, AVVideoHeightKey, &height_value);
+
+    // Segmented output (preferredOutputSegmentInterval) needs monotonic video timing
+    // inside each fragment. The encoder's default B-frames (frame reordering)
+    // intermittently kill the writer with -11800 / OSStatus -16341 when a
+    // reordered frame group straddles a fragment boundary, truncating the
+    // recording at an exact fragment-boundary timestamp. Screen capture gains
+    // almost nothing from B-frames; disable reordering.
+    let compression = av_dict()?;
+    let no_reordering =
+        av_number_bool(false).ok_or_else(|| "NSNumber reordering flag failed".to_string())?;
+    av_dict_set(&compression, AVVideoAllowFrameReorderingKey, &no_reordering);
+
+    // Capture-time rate control (mirrors Cap's AVAssetWriter setup). Without
+    // an explicit budget the encoder default runs several times larger and
+    // every upload needs an ffmpeg transcode pass to shrink it.
+    let average_bit_rate =
+        (CAPTURE_VIDEO_BPP * f64::from(width) * f64::from(height) * f64::from(NATIVE_CAPTURE_FPS))
+            as i64;
+    let bit_rate =
+        av_number_i64(average_bit_rate).ok_or_else(|| "NSNumber bit rate failed".to_string())?;
+    av_dict_set(&compression, AVVideoAverageBitRateKey, &bit_rate);
+    let expected_fps = av_number_i64(i64::from(NATIVE_CAPTURE_FPS))
+        .ok_or_else(|| "NSNumber expected fps failed".to_string())?;
+    av_dict_set(
+        &compression,
+        AVVideoExpectedSourceFrameRateKey,
+        &expected_fps,
+    );
+    // ~0.75s keyframe cadence: guarantees at least one sync sample per movie
+    // fragment (1s interval) so every fragment stays independently seekable.
+    let keyframe_interval = av_number_i64((i64::from(NATIVE_CAPTURE_FPS) * 3 / 4).max(1))
+        .ok_or_else(|| "NSNumber keyframe interval failed".to_string())?;
+    av_dict_set(
+        &compression,
+        AVVideoMaxKeyFrameIntervalKey,
+        &keyframe_interval,
+    );
+
+    av_dict_set(&settings, AVVideoCompressionPropertiesKey, &compression);
+    Ok(settings)
+}
+
+/// AAC 48kHz stereo 128kbps output settings for the audio writer inputs
+/// (both the mixed track and per-source tracks).
+unsafe fn av_audio_output_settings(
+) -> Result<objc2::rc::Retained<objc2::runtime::AnyObject>, String> {
+    use objc2::runtime::AnyObject;
+
+    #[link(name = "AVFoundation", kind = "framework")]
+    extern "C" {
+        static AVEncoderBitRateKey: *const AnyObject;
+        static AVFormatIDKey: *const AnyObject;
+        static AVNumberOfChannelsKey: *const AnyObject;
+        static AVSampleRateKey: *const AnyObject;
+    }
+
+    let settings = av_dict()?;
+    let format = av_number_i64(AUDIO_FORMAT_AAC)
+        .ok_or_else(|| "NSNumber audio format failed".to_string())?;
+    let sample_rate =
+        av_number_i64(48_000).ok_or_else(|| "NSNumber sample rate failed".to_string())?;
+    let channels = av_number_i64(2).ok_or_else(|| "NSNumber channels failed".to_string())?;
+    let bitrate = av_number_i64(128_000).ok_or_else(|| "NSNumber bitrate failed".to_string())?;
+    av_dict_set(&settings, AVFormatIDKey, &format);
+    av_dict_set(&settings, AVSampleRateKey, &sample_rate);
+    av_dict_set(&settings, AVNumberOfChannelsKey, &channels);
+    av_dict_set(&settings, AVEncoderBitRateKey, &bitrate);
+    Ok(settings)
+}
+
+/// Create an AAC `AVAssetWriterInput` (realtime mode), attach it to the
+/// writer, and return it retained.
+unsafe fn av_make_audio_writer_input(
+    input_cls: &objc2::runtime::AnyClass,
+    writer: &objc2::runtime::AnyObject,
+) -> Result<objc2::rc::Retained<objc2::runtime::AnyObject>, String> {
+    use objc2::msg_send;
+    use objc2::runtime::AnyObject;
+
+    #[link(name = "AVFoundation", kind = "framework")]
+    extern "C" {
+        static AVMediaTypeAudio: *const AnyObject;
+    }
+
+    let settings = av_audio_output_settings()?;
+    let raw: *mut AnyObject = msg_send![
+        input_cls,
+        assetWriterInputWithMediaType: AVMediaTypeAudio,
+        outputSettings: &*settings
+    ];
+    if raw.is_null() {
+        return Err("AVAssetWriterInput audio allocation failed".into());
+    }
+    let input = objc2::rc::Retained::retain(raw)
+        .ok_or_else(|| "AVAssetWriterInput audio retain failed".to_string())?;
+    let _: () = msg_send![&*input, setExpectsMediaDataInRealTime: true];
+    let can_add: bool = msg_send![writer, canAddInput: &*input];
+    if !can_add {
+        return Err("AVAssetWriter cannot add audio input".into());
+    }
+    let _: () = msg_send![writer, addInput: &*input];
+    Ok(input)
+}
+
+/// Render an `NSError` for logs: description, domain+code, failure reason,
+/// and the underlying error's domain+code (where the raw OSStatus that
+/// names the real cause usually hides).
+unsafe fn av_error_suffix(err_obj: *mut objc2::runtime::AnyObject) -> String {
+    if err_obj.is_null() {
+        return String::new();
+    }
+    let desc_obj: *mut objc2::runtime::AnyObject = objc2::msg_send![err_obj, localizedDescription];
+    let mut out = av_string_suffix(desc_obj);
+
+    // Domain + code identify the error class; the localizedDescription alone
+    // is usually a generic "The operation could not be completed".
+    let domain_obj: *mut objc2::runtime::AnyObject = objc2::msg_send![err_obj, domain];
+    let code: i64 = objc2::msg_send![err_obj, code];
+    out.push_str(&format!(
+        " [domain{} code={code}]",
+        av_string_suffix(domain_obj)
+    ));
+
+    let reason_obj: *mut objc2::runtime::AnyObject =
+        objc2::msg_send![err_obj, localizedFailureReason];
+    if !reason_obj.is_null() {
+        out.push_str(&format!(" reason{}", av_string_suffix(reason_obj)));
+    }
+
+    // The underlying error carries the raw OSStatus naming the real cause
+    // (e.g. CoreMedia -12780); surface its domain + code too.
+    if let Some(cls) = av_class_named("NSString") {
+        let key_cstr = b"NSUnderlyingError\0".as_ptr() as *const i8;
+        let key: *mut objc2::runtime::AnyObject =
+            objc2::msg_send![cls, stringWithUTF8String: key_cstr];
+        if !key.is_null() {
+            let user_info: *mut objc2::runtime::AnyObject = objc2::msg_send![err_obj, userInfo];
+            if !user_info.is_null() {
+                let underlying: *mut objc2::runtime::AnyObject =
+                    objc2::msg_send![user_info, objectForKey: key];
+                if !underlying.is_null() {
+                    let u_domain: *mut objc2::runtime::AnyObject =
+                        objc2::msg_send![underlying, domain];
+                    let u_code: i64 = objc2::msg_send![underlying, code];
+                    out.push_str(&format!(
+                        " underlying=[domain{} code={u_code}]",
+                        av_string_suffix(u_domain)
+                    ));
+                }
+            }
+        }
+    }
+    out
+}
+
+/// Render the writer's current status + `error` property for logs.
+unsafe fn av_writer_error_suffix(writer: &objc2::runtime::AnyObject) -> String {
+    let status: i64 = objc2::msg_send![writer, status];
+    let err_obj: *mut objc2::runtime::AnyObject = objc2::msg_send![writer, error];
+    format!(" (writer status={status}){}", av_error_suffix(err_obj))
+}
+
+/// `": <string>"` from an `NSString` pointer, or empty when nil.
+unsafe fn av_string_suffix(obj: *mut objc2::runtime::AnyObject) -> String {
+    if obj.is_null() {
+        return String::new();
+    }
+    let utf8: *const i8 = objc2::msg_send![obj, UTF8String];
+    if utf8.is_null() {
+        return String::new();
+    }
+    let cstr = std::ffi::CStr::from_ptr(utf8);
+    format!(": {}", cstr.to_string_lossy())
+}
+
+/// Plain, `Send` capture parameters kept so the watchdog can rebuild the
+/// SCStream from scratch after an interruption without holding on to any
+/// non-`Send` ScreenCaptureKit handles. `width`/`height` are fixed to the
+/// dimensions the writer was created with so a rebuilt stream keeps producing
+/// frames the existing video input accepts.
+#[derive(Clone)]
+struct RestartParams {
+    include_audio: bool,
+    capture_system_audio: bool,
+    mic_device_id: Option<String>,
+    mic_device_label: Option<String>,
+    target_display_id: Option<u32>,
+    capture_region: Option<NativeCaptureRegion>,
+    width: u32,
+    height: u32,
+}
+
+/// Everything the pause/resume path needs to stop the capture source without
+/// tearing down the writer, and to splice a fresh SCStream onto the same
+/// (append-only) file on resume. Cheap to clone — all handles are `Arc`s or
+/// plain data — so it lives alongside the backend and shares the watchdog's
+/// stream/handler/watch.
+pub(crate) struct CustomCaptureResume {
+    stream: Arc<Mutex<SCStream>>,
+    handler: CustomScreenCaptureOutputHandler,
+    watch: Arc<CaptureWatch>,
+    params: RestartParams,
+}
+
+impl CustomCaptureResume {
+    /// Pause: stop only the capture source (SCStream). The writer, file, and
+    /// live uploader stay alive; mic/screen go cold. The watchdog is told to
+    /// hold so it never reads the silence as a stall and rebuilds.
+    pub(crate) fn pause(&self) {
+        self.watch.set_paused(true);
+        if let Ok(guard) = self.stream.lock() {
+            let _ = guard.stop_capture();
+        }
+        eprintln!("[mixer] capture paused; source stream stopped, writer/file kept open");
+    }
+
+    /// Resume: build a fresh SCStream wired to the SAME writer and start it,
+    /// after advancing the writer's pause offset by `paused_for` so the new
+    /// samples rebase past the pause gap. The result is one continuous
+    /// append-only file — the live uploader is never interrupted, exactly like
+    /// a watchdog stream rebuild.
+    pub(crate) fn resume(&self, paused_for: Duration) -> Result<(), String> {
+        let writer = &self.handler.writer;
+        let prev_offset = writer.pause_offset();
+
+        // Build the replacement stream FIRST: a build failure must not shift the
+        // timeline. The session stays paused and can be retried — and a retry
+        // re-measures `paused_for` from the same (uncleared) pause instant, so
+        // advancing the offset here would compound on every failed attempt.
+        let new_stream = build_custom_scstream(&self.params, &self.handler, &self.watch)?;
+
+        // Apply the pause gap just before the stream starts delivering, so the
+        // first rebased frame already skips it. Roll back if startup fails so
+        // the failed attempt leaves the offset exactly as it was.
+        writer.set_pause_offset(prev_offset + paused_for.as_secs_f64());
+        if let Err(err) = new_stream.start_capture() {
+            writer.set_pause_offset(prev_offset);
+            return Err(format!("resume start_capture failed: {err:?}"));
+        }
+
+        // Stop any lingering paused stream, then swap the fresh one in under
+        // the same lock the watchdog uses so the two never feed at once.
+        if let Ok(guard) = self.stream.lock() {
+            let _ = guard.stop_capture();
+        }
+        if let Ok(mut guard) = self.stream.lock() {
+            *guard = new_stream;
+        }
+        // Discard the stop note our own pause/stop raised and reset the
+        // activity clock so the watchdog doesn't immediately treat the just-
+        // rebuilt stream as stalled, then hand supervision back.
+        let _ = self.watch.take_stream_stopped();
+        self.watch.note_activity();
+        self.watch.set_paused(false);
+        eprintln!(
+            "[mixer] capture resumed; fresh stream spliced onto same writer (paused {}ms)",
+            paused_for.as_millis()
+        );
+        Ok(())
+    }
+}
+
+/// Stream lifecycle delegate for the custom pipeline. ScreenCaptureKit calls
+/// this when it stops the stream (e.g. the captured display changed Spaces or a
+/// full-screen app took over). Without it those stops are invisible and the
+/// recording silently freezes. We only flag the watchdog here — rebuilding the
+/// stream from an SCK callback thread is unsafe, so recovery happens off-thread.
+struct CustomCaptureStreamDelegate {
+    watch: Arc<CaptureWatch>,
+}
+
+impl SCStreamDelegateTrait for CustomCaptureStreamDelegate {
+    fn did_stop_with_error(&self, error: SCError) {
+        // The user stopping capture via macOS (menu-bar "Stop Sharing") is a
+        // request, not a failure — rebuilding the stream would fight the
+        // user. Everything else (SystemStoppedStream on lid close / display
+        // sleep, connection failures, ...) goes to the rebuild path.
+        if error.stream_error_code()
+            == Some(screencapturekit::error::SCStreamErrorCode::UserStopped)
+        {
+            eprintln!("[mixer] capture stopped by the user via macOS; requesting recording stop");
+            self.watch.note_user_stopped();
+            return;
+        }
+        let reason = format!("ScreenCaptureKit stream stopped with error: {error}");
+        eprintln!("[mixer] {reason}");
+        self.watch.note_stream_stopped(reason);
+    }
+
+    fn stream_did_stop(&self, error: Option<String>) {
+        let detail = error.unwrap_or_else(|| "no detail".to_string());
+        let reason = format!("ScreenCaptureKit stream stopped: {detail}");
+        eprintln!("[mixer] {reason}");
+        self.watch.note_stream_stopped(reason);
+    }
+}
+
+/// Build (but do not start) a fresh SCStream for the custom pipeline from plain
+/// parameters. Shared by the initial start and every watchdog rebuild so the
+/// filter/config/handler/delegate wiring can never drift between them.
+fn build_custom_scstream(
+    params: &RestartParams,
+    handler: &CustomScreenCaptureOutputHandler,
+    watch: &Arc<CaptureWatch>,
+) -> Result<SCStream, String> {
+    let content =
+        SCShareableContent::get().map_err(|e| format!("shareable content lookup failed: {e:?}"))?;
+    let displays = content.displays();
+    let display = params
+        .target_display_id
+        .and_then(|id| displays.iter().find(|d| d.display_id() == id))
+        .or_else(|| displays.first())
+        .ok_or_else(|| "No displays available for ScreenCaptureKit recording.".to_string())?;
+
+    let region_rect = region_source_rect(params.capture_region, display.width(), display.height())?;
+    let filter_builder = SCContentFilter::create()
+        .with_display(display)
+        .with_excluding_windows(&[]);
+    let filter = if let Some((rect, _, _)) = region_rect {
+        filter_builder.with_content_rect(rect).build()
+    } else {
+        filter_builder.build()
+    };
+
+    let selected_mic = if params.include_audio {
+        resolve_microphone_capture_device(
+            params.mic_device_id.as_deref(),
+            params.mic_device_label.as_deref(),
+        )?
+    } else {
+        None
+    };
+
+    let mut config = SCStreamConfiguration::new()
+        .with_width(params.width)
+        .with_height(params.height)
+        .with_fps(NATIVE_CAPTURE_FPS)
+        .with_queue_depth(8)
+        .with_shows_cursor(true)
+        .with_captures_audio(params.capture_system_audio)
+        .with_captures_microphone(params.include_audio)
+        .with_excludes_current_process_audio(true)
+        .with_sample_rate(48000)
+        .with_channel_count(2);
+    // Pin SDR NV12 (video-range 4:2:0) delivery, matching Cap. Two reasons:
+    //  - Without a pin, ScreenCaptureKit switches the delivered pixel format
+    //    to HDR/EDR variants (half-float / 10-bit) when the frontmost app
+    //    renders EDR content; the SDR H.264 writer input then rejects every
+    //    appended frame (-11800 / OSStatus -16122) and the writer dies —
+    //    including on rebuilt streams while that app stays frontmost.
+    //  - NV12 is VideoToolbox's native encoder input and half the memory
+    //    bandwidth of BGRA.
+    // NOTE: do not add `set_color_space_name` — the crate's ObjC shim for it
+    // raises an uncatchable Objective-C exception and aborts the process;
+    // the pixel-format pin alone keeps the encoder input format stable.
+    config.set_pixel_format(screencapturekit::stream::configuration::PixelFormat::YCbCr_420v);
+    if let Some((rect, _, _)) = region_rect {
+        config.set_source_rect(rect);
+    }
+    if let Some(device) = selected_mic.as_ref() {
+        config.set_microphone_capture_device_id(&device.id);
+    }
+    config.set_stream_name(Some("Clips custom full-screen recording"));
+
+    let delegate = CustomCaptureStreamDelegate {
+        watch: Arc::clone(watch),
+    };
+    let mut stream = SCStream::new_with_delegate(&filter, &config, delegate);
+    stream.add_output_handler(handler.clone(), SCStreamOutputType::Screen);
+    if params.capture_system_audio {
+        stream.add_output_handler(handler.clone(), SCStreamOutputType::Audio);
+    }
+    if params.include_audio {
+        stream.add_output_handler(handler.clone(), SCStreamOutputType::Microphone);
+    }
+    Ok(stream)
+}
+
+/// Supervise a running custom capture and rebuild the SCStream when it stops or
+/// goes silent (the Spaces/full-screen interruption). Runs on its own thread;
+/// exits when recording is torn down (`shutdown`) or the writer is closed.
+fn spawn_capture_watchdog(
+    app: AppHandle,
+    stream: Arc<Mutex<SCStream>>,
+    writer: CustomScreenCaptureWriter,
+    handler: CustomScreenCaptureOutputHandler,
+    watch: Arc<CaptureWatch>,
+    recording_enabled: Arc<AtomicBool>,
+    shutdown: Arc<AtomicBool>,
+    params: RestartParams,
+) {
+    std::thread::spawn(move || {
+        let mut restart_streak: u32 = 0;
+        // After a rebuild, hold off re-evaluating until the new stream has had a
+        // fair chance to deliver its first frames.
+        let mut cooldown_until: Option<Instant> = None;
+
+        loop {
+            std::thread::sleep(CAPTURE_WATCHDOG_POLL);
+            if shutdown.load(Ordering::SeqCst) {
+                return;
+            }
+            if writer.appends_closed.load(Ordering::SeqCst) {
+                // Appends closed while we're still supervising. A clean stop
+                // sets `watchdog_shutdown` BEFORE closing appends (SeqCst), so
+                // re-check it: if it's still unset, appends were closed by an
+                // unrecoverable capture failure (an Objective-C exception or
+                // panic in the sample callback, an `appendSampleBuffer` error,
+                // or a writer-session failure) with the SCStream still running
+                // and the UI still showing "recording". Stop capture and fire
+                // the normal stop so the partial — still a valid fragmented
+                // file — is finalized/uploaded instead of silently truncating.
+                if shutdown.load(Ordering::SeqCst) {
+                    return;
+                }
+                eprintln!(
+                    "[mixer] appends closed without a stop request; treating as fatal capture failure and finalizing partial recording"
+                );
+                if let Ok(guard) = stream.lock() {
+                    let _ = guard.stop_capture();
+                }
+                let _ = app.emit("clips:recorder-stop", ());
+                return;
+            }
+            // Nothing to supervise until output is enabled and the writer
+            // session has actually begun; the handler keeps `last_activity`
+            // fresh from the first delivered buffer, so there is no false stall
+            // when we start evaluating.
+            if !recording_enabled.load(Ordering::SeqCst) || !writer.started.load(Ordering::SeqCst) {
+                continue;
+            }
+
+            // Paused: the capture source is intentionally stopped while the
+            // writer/file/uploader stay alive. Don't read the silence as a
+            // stall or rebuild — resume splices a fresh stream back in.
+            if watch.is_paused() {
+                restart_streak = 0;
+                cooldown_until = None;
+                continue;
+            }
+
+            // User stopped capture from the macOS UI: trigger the normal stop
+            // flow (same event the toolbar Stop button emits, so the clip is
+            // finalized and uploaded) and stop supervising. Never rebuild.
+            if watch.user_stopped() {
+                eprintln!("[mixer] user stopped capture via macOS; emitting recorder stop");
+                let _ = app.emit("clips:recorder-stop", ());
+                return;
+            }
+
+            if let Some(until) = cooldown_until {
+                if Instant::now() < until {
+                    continue;
+                }
+                cooldown_until = None;
+                if watch.since_activity() < CAPTURE_STALL_TIMEOUT {
+                    // Rebuild recovered — frames are flowing again.
+                    restart_streak = 0;
+                    continue;
+                }
+                // Still no frames after the rebuild; fall through and retry.
+            }
+
+            let reported_stop = watch.take_stream_stopped();
+            let stalled = watch.since_activity() >= CAPTURE_STALL_TIMEOUT;
+            if reported_stop.is_none() && !stalled {
+                restart_streak = 0;
+                continue;
+            }
+
+            let reason = reported_stop.unwrap_or_else(|| {
+                format!(
+                    "no capture frames for {:?} (display may have moved to another Space)",
+                    watch.since_activity()
+                )
+            });
+            restart_streak += 1;
+            if restart_streak > CAPTURE_MAX_RESTARTS {
+                eprintln!(
+                    "[mixer] capture interrupted ({reason}) and did not recover after {CAPTURE_MAX_RESTARTS} restarts; finalizing partial recording"
+                );
+                // Close appends (but leave `failed` unset) so the stop path
+                // still finalizes everything captured before the interruption
+                // instead of discarding it.
+                writer.appends_closed.store(true, Ordering::SeqCst);
+                if let Ok(guard) = stream.lock() {
+                    let _ = guard.stop_capture();
+                }
+                // Fire the normal stop so the partial clip is finalized/uploaded
+                // and the UI leaves the recording state, rather than sitting on
+                // a frozen recording after the watchdog gives up.
+                let _ = app.emit("clips:recorder-stop", ());
+                return;
+            }
+
+            eprintln!(
+                "[mixer] capture interrupted ({reason}); rebuilding stream (attempt {restart_streak}/{CAPTURE_MAX_RESTARTS})"
+            );
+
+            // Stop the dead/wedged stream before starting a replacement so two
+            // streams never feed the writer at once. Slow build/start work is
+            // done without holding the stream lock.
+            if let Ok(guard) = stream.lock() {
+                let _ = guard.stop_capture();
+            }
+            if shutdown.load(Ordering::SeqCst) || writer.appends_closed.load(Ordering::SeqCst) {
+                return;
+            }
+
+            match build_custom_scstream(&params, &handler, &watch).and_then(|s| {
+                s.start_capture()
+                    .map(|()| s)
+                    .map_err(|e| format!("start_capture failed: {e:?}"))
+            }) {
+                Ok(new_stream) => {
+                    if shutdown.load(Ordering::SeqCst)
+                        || writer.appends_closed.load(Ordering::SeqCst)
+                    {
+                        let _ = new_stream.stop_capture();
+                        return;
+                    }
+                    if let Ok(mut guard) = stream.lock() {
+                        *guard = new_stream;
+                    }
+                    // Discard any stop note the deliberate teardown of the old
+                    // stream raised; otherwise a later poll would consume it as
+                    // a fresh failure and rebuild the healthy stream again.
+                    let _ = watch.take_stream_stopped();
+                    cooldown_until = Some(Instant::now() + CAPTURE_STALL_TIMEOUT);
+                    eprintln!("[mixer] capture stream rebuilt; waiting for frames");
+                }
+                Err(err) => {
+                    eprintln!("[mixer] capture rebuild failed: {err}");
+                    // Short cooldown before the next attempt so a hard failure
+                    // (e.g. display gone) doesn't spin the CPU.
+                    cooldown_until = Some(Instant::now() + CAPTURE_WATCHDOG_POLL);
+                }
+            }
+        }
+    });
+}
+
+/// Start the custom capture backend: create the fragmented-MP4 writer,
+/// build + start the SCStream from rebuildable params, and spawn the
+/// capture watchdog that supervises it. Returns the backend handle plus
+/// the output dimensions.
+pub(super) fn start_custom_screencapturekit_backend_at(
+    app: &AppHandle,
+    output_path: &Path,
+    include_audio: bool,
+    capture_system_audio: bool,
+    mic_device_id: Option<&str>,
+    mic_device_label: Option<&str>,
+    target_display_id: Option<u32>,
+    capture_region: Option<NativeCaptureRegion>,
+    defer_recording_output: bool,
+) -> Result<(NativeFullscreenBackend, Option<u32>, Option<u32>), String> {
+    eprintln!("[clips-tray] starting custom screen capture backend");
+    let content =
+        SCShareableContent::get().map_err(|e| format!("shareable content lookup failed: {e:?}"))?;
+    let displays = content.displays();
+    let display = target_display_id
+        .and_then(|id| displays.iter().find(|d| d.display_id() == id))
+        .or_else(|| displays.first())
+        .ok_or_else(|| "No displays available for ScreenCaptureKit recording.".to_string())?;
+
+    let source_width = display.width();
+    let source_height = display.height();
+    let region_rect = region_source_rect(capture_region, source_width, source_height)?;
+    let (capture_width, capture_height) = region_rect
+        .as_ref()
+        .map(|(_, width, height)| (*width, *height))
+        .unwrap_or((source_width, source_height));
+    let (width, height) = native_capture_dimensions(capture_width, capture_height);
+    // The display handle here is only used to size the output; the actual
+    // (rebuildable) stream is constructed from plain params via
+    // `build_custom_scstream` so the watchdog can recreate it later.
+
+    let params = RestartParams {
+        include_audio,
+        capture_system_audio,
+        mic_device_id: mic_device_id.map(str::to_string),
+        mic_device_label: mic_device_label.map(str::to_string),
+        target_display_id,
+        capture_region,
+        width,
+        height,
+    };
+
+    // Live-mix only when both audio sources are present; a single source needs
+    // no mixing and goes straight to its own track.
+    let mix_live = include_audio && capture_system_audio;
+    let writer = CustomScreenCaptureWriter::new(
+        output_path,
+        width,
+        height,
+        capture_system_audio,
+        include_audio,
+        mix_live,
+    )?;
+    let recording_enabled = Arc::new(AtomicBool::new(!defer_recording_output));
+    let mic_ready = include_audio.then(|| Arc::new(AtomicBool::new(false)));
+    let watch = Arc::new(CaptureWatch::new());
+    let handler = CustomScreenCaptureOutputHandler {
+        writer: writer.clone(),
+        recording_enabled: Arc::clone(&recording_enabled),
+        mic_ready: mic_ready.clone(),
+        watch: Arc::clone(&watch),
+    };
+
+    let stream = build_custom_scstream(&params, &handler, &watch)?;
+    if let Err(err) = stream.start_capture() {
+        let _ = std::fs::remove_file(output_path);
+        return Err(format!("custom capture start failed: {err:?}"));
+    }
+    eprintln!(
+        "[clips-tray] custom ScreenCaptureKit recording started: {width}x{height} @ {NATIVE_CAPTURE_FPS}fps from {capture_width}x{capture_height} (display {source_width}x{source_height}), mic={include_audio} system_audio={capture_system_audio} deferred_output={defer_recording_output}"
+    );
+
+    let stream = Arc::new(Mutex::new(stream));
+    let watchdog_shutdown = Arc::new(AtomicBool::new(false));
+    // Snapshot the handles pause/resume needs before the watchdog consumes
+    // `handler` and `params`; the fresh stream it builds on resume feeds the
+    // same writer as the watchdog's own rebuilds.
+    let resume = CustomCaptureResume {
+        stream: Arc::clone(&stream),
+        handler: handler.clone(),
+        watch: Arc::clone(&watch),
+        params: params.clone(),
+    };
+    spawn_capture_watchdog(
+        app.clone(),
+        Arc::clone(&stream),
+        writer.clone(),
+        handler,
+        Arc::clone(&watch),
+        Arc::clone(&recording_enabled),
+        Arc::clone(&watchdog_shutdown),
+        params,
+    );
+
+    Ok((
+        NativeFullscreenBackend::CustomScreenCaptureKit {
+            stream,
+            writer,
+            mic_ready,
+            recording_enabled,
+            watchdog_shutdown,
+            resume,
+        },
+        Some(width),
+        Some(height),
+    ))
+}