@adminiumjs/i18n 0.3.0-rc.2 → 0.3.0-rc.4

package/dist/resources/zh-cn/studio.d.ts

@@ -538,6 +538,9 @@ declare const _default: {
         readonly successBody: "{pages} 个页面，分布于 {groups} 个导航组——由你的架构生成，可在 Studio 中编辑。";
         readonly successTitle: "你的仪表板已就绪";
         readonly title: "生成你的应用";
+        readonly blankBody: "按照你的要求，没有生成任何内容。准备好后，即可基于此连接构建你的第一个页面。";
+        readonly blankTitle: "你的连接已就绪";
+        readonly createPage: "创建页面";
     };
     readonly hostedApps: {
         readonly browse: {
@@ -624,9 +627,15 @@ declare const _default: {
                 readonly pageWarnings: "此应用的部分页面将在没有表的情况下创建";
             };
             readonly done: {
-                readonly title: "已安装";
                 readonly body: "{key} 已开始提供服务。请在下方选择其员工端的显示位置。";
-                readonly schema: "已创建表：{created} · 复用：{reused}";
+                readonly titleApp: "{app} 已安装";
+                readonly tablesCreated: "在 {connection} 中创建的数据表";
+                readonly tablesKept: "按原样使用的数据表";
+                readonly pages: "已生成的页面";
+                readonly sampleNotAdded: "未添加";
+                readonly sampleAdding: "正在添加…";
+                readonly sampleAdded: "已添加";
+                readonly sampleLater: "你可以稍后在应用页面中添加。";
             };
             readonly cancel: "取消";
             readonly back: "上一步";
@@ -648,6 +657,68 @@ declare const _default: {
                 readonly hint: "读取自你上传的安装包中的 manifest.json。在你确认架构计划之前不会创建任何内容。";
                 readonly replace: "上传其他安装包";
             };
+            readonly check: {
+                readonly title: "检查数据表";
+                readonly hint: "{app} 将在 {connection} 中创建这些表。按下“安装”之前不会有任何更改。";
+                readonly summaryNew: "{count} 个新表";
+                readonly summaryEarlier: "{count} 个来自之前的安装";
+                readonly summaryShared: "{count} 个与其他应用共享";
+                readonly summaryTaken: "{count, plural, other {# 个名称已被占用}}";
+                readonly altPrefixInUse: "已使用前缀 {prefix} 检查。";
+                readonly usualPrefix: "使用常规前缀";
+                readonly badgeNew: "新建";
+                readonly badgeEarlier: "之前安装留下的";
+                readonly badgeShared: "与 {app} 共享";
+                readonly badgeTaken: "名称已被占用";
+                readonly columns: "{count, plural, other {# 列}}";
+                readonly keep: "使用它并保留其数据";
+                readonly sharedNote: "{app} 也在使用此表。两个应用会继续读写相同的行。";
+                readonly earlierNote: "Adminium 在之前安装 {app} 时创建了此表。";
+                readonly createPreview: "创建预览";
+                readonly addsColumns: "{count, plural, other {添加 # 列：}}";
+                readonly widens: "将 {column} 从 {from} 加宽为 {to}。";
+                readonly setIdentity: "{column} 会自动为新行编号。";
+                readonly enumValues: "{column} 还接受 {values}。";
+                readonly noLoss: "不会删除任何列，也不会丢失任何数据。";
+                readonly reuseNote: "应用会读写已有的行。";
+                readonly renameTitle: "重命名现有表以腾出名称";
+                readonly renameNote: "将为应用创建一个新的 {table}。";
+                readonly renameField: "现有表的新名称";
+                readonly renameFieldNote: "Adminium 会修复指向旧名称的自有页面和规则。";
+                readonly prefixTitle: "为此应用使用不同的前缀";
+                readonly prefixNote: "一次性应用于该应用的所有表。";
+                readonly prefixField: "前缀";
+                readonly prefixFieldNote: "{count, plural, other {将重新检查全部 # 个表。}}";
+                readonly takenIntro: "{table} 已存在，且是手动创建的。请选择如何处理它。";
+                readonly takenIntroShort: "如何处理 {table}";
+                readonly pickFirst: "安装前请选择如何处理 {table}。";
+                readonly checkFirst: "安装前请重新检查数据表。";
+                readonly nothingYet: "按下“安装”之前不会有任何更改。";
+                readonly again: "重新检查";
+                readonly adoptedNote: "之前安装的 {app} 按原样使用了此表。";
+            };
+            readonly running: {
+                readonly title: "正在安装 {app}";
+                readonly hint: "正在写入 {connection}。";
+                readonly tables: "数据表";
+                readonly pages: "页面";
+            };
+            readonly stopped: {
+                readonly failed: "失败";
+                readonly notStarted: "未开始";
+                readonly atTables: "创建数据表失败，之后的步骤均未运行。";
+                readonly atIntrospect: "数据表已创建。重新读取失败，之后的步骤均未运行。";
+                readonly atPages: "数据表已创建。创建页面失败，之后的步骤均未运行。";
+                readonly atFinish: "数据表和页面已创建。完成安装失败。";
+                readonly title: "安装中途停止";
+                readonly created: "已创建 {count} 个";
+                readonly made: "已创建";
+                readonly said: "数据库返回的信息";
+                readonly saidAbout: "数据库关于 {table} 返回的信息";
+                readonly resume: "没有删除任何内容。重试会从停止的位置继续。";
+                readonly retry: "重试";
+                readonly back: "返回架构计划";
+            };
         };
         readonly installed: {
             readonly title: "已安装的应用";
@@ -655,11 +726,6 @@ declare const _default: {
             readonly emptyTitle: "尚未安装任何应用";
             readonly emptyBody: "上传已构建的界面包即可安装。在这里安装的应用会立即提供服务——与指向目录的方式不同，无需重启。";
             readonly uninstall: "卸载";
-            readonly confirmTitle: "卸载此应用？";
-            readonly confirmBody: "它的界面将停止提供服务，安装包会被删除。它在你数据库中创建的表不会受到影响。";
-            readonly confirmPrompt: "输入 {key} 以确认";
-            readonly confirmCancel: "取消";
-            readonly confirmClose: "关闭";
             readonly stagedTitle: "已上传但未安装";
             readonly stagedHint: "丢弃你决定不用的那个，或再次上传同一标识以替换它。";
             readonly discard: "丢弃";
@@ -671,7 +737,10 @@ declare const _default: {
             readonly missingBody: "它的文件不在此服务器上，因此无法提供服务。请重新安装相同版本，或将其卸载。";
             readonly update: "更新";
             readonly discardFailed: "未丢弃该上传";
-            readonly uninstallFailed: "未卸载该应用";
+            readonly renamed: "数据表已重命名为 {prefix}…";
+            readonly oldNames: "此安装使用的是旧的表名。";
+            readonly oldNamesWhy: "这些表创建于前缀功能之前。";
+            readonly renameTo: "重命名为 {prefix}…";
         };
         readonly instances: {
             readonly add: "添加实例";
@@ -723,6 +792,10 @@ declare const _default: {
             readonly close: "关闭";
             readonly done: "{app} 已更新到 v{version}";
             readonly missingColumns: "缺少：{tables}。";
+            readonly checkSubtitle: "检查此版本使用的数据表。";
+            readonly pickFirst: "更新前请选择如何处理 {table}。";
+            readonly checkFirst: "更新前请重新检查数据表。";
+            readonly nothingYet: "按下“更新”之前不会有任何更改。";
         };
         readonly veto: {
             readonly title: "此部署无法在线浏览";
@@ -738,6 +811,18 @@ declare const _default: {
             readonly valuesFailed: "列已添加，但无法记录其允许的值";
             readonly confirm: "添加列并更新";
         };
+        readonly rename: {
+            readonly title: "将数据表重命名为 {prefix}…";
+            readonly subtitle: "{count, plural, other {{connection} 中的 # 个数据表}}";
+            readonly close: "关闭";
+            readonly body: "此安装早于前缀功能。重命名会为每个表加上应用的前缀，让 {app} 能识别自己的表。";
+            readonly planFailed: "无法规划重命名";
+            readonly refused: "这些表无法在此重命名";
+            readonly failed: "数据表未被重命名";
+            readonly repair: "Adminium 也会更新指向旧名称的自有页面和规则。";
+            readonly cancel: "取消";
+            readonly confirm: "重命名数据表";
+        };
     };
     readonly hub: {
         readonly action: {
@@ -777,6 +862,10 @@ declare const _default: {
             readonly success: "连接“{name}”已删除";
             readonly title: "删除连接";
             readonly forbidden: "您的角色不包含管理连接的权限，因此未删除此连接。";
+            readonly liveKeys: {
+                readonly body: "基于这些密钥构建的页面将无法继续工作。请先在“公共 API”页面撤销它们，然后再删除此连接。";
+                readonly title: "仍有可发布密钥在使用此连接";
+            };
         };
         readonly empty: {
             readonly body: "连接数据库后，Adminium 会根据其架构生成您的管理面板。";
@@ -867,6 +956,10 @@ declare const _default: {
         };
         readonly title: "你需要什么？";
         readonly trust: "我们只读取你的架构——设置期间绝不读取行数据。";
+        readonly blank: {
+            readonly description: "不生成任何内容。连接数据库后，逐个构建你想要的页面。";
+            readonly title: "空白画布";
+        };
     };
     readonly llmRuns: {
         readonly review: {
@@ -1284,6 +1377,7 @@ declare const _default: {
             readonly visibleHint: "隐藏的页面仍可通过网址访问，只要对方有链接。";
             readonly width: "内容宽度";
             readonly widthHint: "在大屏幕上，页面内容列最多可以有多宽。";
+            readonly groupApp: "在所属应用的专属分区中";
         };
         readonly filters: {
             readonly add: "添加筛选";
@@ -1545,6 +1639,10 @@ declare const _default: {
                 readonly body: "这些页面可以通过网址访问，但不会出现在侧边栏中。请逐个打开并选择分组。";
                 readonly title: "有些页面不属于任何侧边栏分组";
             };
+            readonly apps: {
+                readonly title: "在已安装应用的分区中";
+                readonly body: "每个应用都把自己的页面放在侧边栏中的专属分区。";
+            };
         };
         readonly status: {
             readonly hidden: "已隐藏";
@@ -1679,7 +1777,6 @@ declare const _default: {
             readonly connectionLabel: "连接 ID";
             readonly create: "创建作用域";
             readonly delete: "删除";
-            readonly deleteBody: "任何使用绑定到此作用域的密钥的页面都会停止加载数据。密钥不会被删除——如果你想删除的是密钥，请先吊销它们。";
             readonly deleteConfirm: "删除作用域";
             readonly deletePrompt: "输入作用域名称以确认";
             readonly deleteTitle: "删除此作用域";
@@ -1693,6 +1790,11 @@ declare const _default: {
             readonly nameLabel: "名称";
             readonly subtitle: "作用域界定了一个密钥所能触及的全部范围——哪些表、具体哪些列，以及一个调用方只能收窄、绝不能移除的过滤条件。";
             readonly title: "作用域";
+            readonly deleteBodyKeys: "仍有有效密钥的作用域无法删除，请先吊销它的密钥。已吊销或已过期的密钥会随作用域一起删除。";
+            readonly liveKeys: {
+                readonly body: "基于这些密钥构建的页面将无法继续工作。请先在密钥列表中吊销它们，然后再删除此作用域。";
+                readonly title: "仍有可发布密钥在使用此作用域";
+            };
         };
         readonly status: {
             readonly heading: "状态";
@@ -1824,6 +1926,19 @@ declare const _default: {
             readonly optionsSource: "允许的值";
             readonly optionsSourceHelp: "列表在 Studio 中写一次，引用它的每一列都能使用。";
             readonly optionsValues: "这些值";
+            readonly decided: {
+                readonly title: "由 Adminium 决定";
+                readonly help: "Adminium 在每次写入时填写此项，公开端点永远不能让访客设置它。";
+                readonly copy: "从 {via} 指向的行的 {from} 复制";
+                readonly copyAlways: "始终如此，无论写入者提供什么";
+                readonly copyDefault: "除非写入者提供了值";
+                readonly sequence: "按顺序的下一个编号，从 {start} 开始";
+                readonly code: "类似 {example} 的随机代码";
+                readonly remove: "移除此规则";
+                readonly rollup: "{from} 中其各行 {sum} 的合计";
+                readonly rollupTimes: "{from} 中其各行 {sum} × {times} 的合计";
+            };
+            readonly venueLocal: "在此写入的不带时区的时间即为场所的本地时间。";
         };
         readonly saveFailed: "保存失败：{message}";
         readonly subtitle: "{tables} 张表 · 已应用 {applied} 项覆盖";
@@ -2007,6 +2122,22 @@ declare const _default: {
             readonly cta: "打开 AI 设置";
             readonly heading: "AI 增强";
         };
+        readonly apiCard: {
+            readonly api: {
+                readonly helper: "对外提供你的密钥所限定的端点。关闭后，所有密钥会立即失效；不会删除任何内容。";
+                readonly label: "公开 API";
+            };
+            readonly docs: {
+                readonly helper: "位于 /api-docs 的公开页面，向任何能访问此服务器的人列出你的有效密钥可调用的端点（包括员工级端点），以及它们的路径、方法和列名。页面不显示任何数据或密钥。";
+                readonly label: "API 文档页面";
+            };
+            readonly failed: "开关未能切换，请重试。";
+            readonly heading: "公开 API";
+            readonly notRegistered: {
+                readonly body: "请设置 ADMINIUM_PUBLIC_API_ORIGINS 并重启。在此之前，这些开关不会产生任何效果。";
+                readonly title: "此服务器未启用";
+            };
+        };
         readonly danger: {
             readonly deleteCta: "删除连接";
             readonly deleteDesc: "删除该连接及其生成的页面。您的数据库不会被改动。此操作无法撤销。";
@@ -2111,9 +2242,9 @@ declare const _default: {
             readonly heading: "项目";
         };
         readonly publicApiCard: {
-            readonly body: "让你自己的面向客户或员工的页面通过你定义的作用域读取这个数据库。";
-            readonly cta: "打开公开 API";
-            readonly heading: "公开 API";
+            readonly body: "创建端点，以及允许调用它们的密钥。";
+            readonly cta: "打开 API 密钥";
+            readonly heading: "API 密钥";
         };
         readonly review: {
             readonly cancel: "取消";
@@ -2433,6 +2564,7 @@ declare const _default: {
             readonly source: "来源";
             readonly tables: "数据表";
             readonly test: "分析";
+            readonly finish: "完成";
         };
         readonly title: "新建连接";
     };
@@ -2485,6 +2617,408 @@ declare const _default: {
         readonly values: "值";
         readonly view: "查看";
     };
+    readonly apiKeys: {
+        readonly banner: {
+            readonly bodyOnce: "请立即复制——之后将无法再次查看。适用范围：{summary}。";
+            readonly bodyRevealable: "请立即复制——之后可在下方列表中再次显示。适用范围：{summary}。";
+            readonly copied: "已复制";
+            readonly copy: "复制";
+            readonly titleNamed: "已创建 {name}";
+        };
+        readonly builder: {
+            readonly auth: {
+                readonly anon: "匿名";
+                readonly authenticated: "已认证";
+                readonly label: "认证要求";
+                readonly service: "服务角色";
+            };
+            readonly cancel: "取消";
+            readonly columns: {
+                readonly all: "全部";
+                readonly label: "公开的列";
+                readonly none: "无";
+            };
+            readonly create: "创建端点";
+            readonly delete: "删除端点";
+            readonly deleteRefused: "{count, plural, other {仍有 # 个密钥在使用}}此端点：{names}。";
+            readonly filters: {
+                readonly add: "添加";
+                readonly empty: "无过滤条件——来源中的每一行都可访问。";
+                readonly label: "默认过滤条件";
+                readonly remove: "移除过滤条件";
+                readonly value: "值";
+            };
+            readonly footer: {
+                readonly applyFirst: "请先应用或还原已编辑的定义。";
+            };
+            readonly methodUnsupported: "此来源无法支持 {method}：它没有主键。";
+            readonly methods: "方法";
+            readonly op: {
+                readonly between: "介于";
+                readonly eq: "等于";
+                readonly gt: "大于";
+                readonly gte: "至少";
+                readonly ilike: "包含（不区分大小写）";
+                readonly in: "在列表中";
+                readonly is_null: "为空";
+                readonly like: "包含";
+                readonly lt: "小于";
+                readonly lte: "至多";
+                readonly neq: "不等于";
+                readonly not_null: "不为空";
+            };
+            readonly paging: {
+                readonly asc: "升序";
+                readonly defaultLimit: "默认条数限制";
+                readonly desc: "降序";
+                readonly label: "分页与排序";
+                readonly maxLimit: "最大条数限制";
+                readonly orderBy: "排序依据";
+            };
+            readonly pane: {
+                readonly apply: "应用到表单";
+                readonly dirty: "已编辑——未应用";
+                readonly format: "格式化";
+                readonly label: "路由定义，JSON";
+                readonly more: "{first}（另有 {n} 项）";
+                readonly revert: "还原";
+                readonly synced: "已与表单同步";
+                readonly title: "路由定义";
+            };
+            readonly rate: {
+                readonly hour: "小时";
+                readonly label: "速率限制与响应";
+                readonly minute: "分钟";
+                readonly per: "每";
+                readonly requests: "请求数";
+                readonly second: "秒";
+            };
+            readonly refused: {
+                readonly keys: "保存后将导致 {count, plural, other {# 个密钥}}失效：{names}。";
+            };
+            readonly route: "路由";
+            readonly routePlaceholder: "customers";
+            readonly routeRename: "调用方必须改用新路径。";
+            readonly save: "保存更改";
+            readonly shape: {
+                readonly array: "纯数组";
+                readonly label: "响应结构";
+                readonly single: "单个对象";
+                readonly wrapped: "包裹在 '{' data '}' 中";
+            };
+            readonly source: "来源表或视图";
+            readonly subtitle: "以可视化方式配置——Adminium 会为你编写路由定义";
+            readonly titleEdit: "编辑端点";
+            readonly titleNew: "新建端点";
+        };
+        readonly connection: {
+            readonly label: "连接";
+        };
+        readonly create: "创建密钥";
+        readonly endpoints: {
+            readonly col: {
+                readonly auth: "认证";
+                readonly methods: "方法";
+                readonly rate: "速率限制";
+                readonly route: "路由";
+            };
+            readonly custom: "自定义";
+            readonly edit: "编辑端点";
+            readonly explore: "浏览 API";
+            readonly new: "新建端点";
+            readonly subtitle: "根据你的架构生成。密钥的适用范围限定在这些端点内。";
+            readonly title: "端点";
+            readonly unavailable: "不可用";
+        };
+        readonly keys: {
+            readonly col: {
+                readonly access: "访问权限";
+                readonly actions: "操作";
+                readonly key: "密钥";
+                readonly lastUsed: "上次使用";
+                readonly name: "名称";
+            };
+            readonly count: "{n, plural, other {# 个密钥}}";
+            readonly empty: "没有有效的密钥。创建一个即可开始。";
+            readonly hide: "隐藏密钥";
+            readonly kind: {
+                readonly browser: "浏览器";
+                readonly server: "服务器";
+            };
+            readonly never: "从未";
+            readonly reveal: "显示密钥";
+            readonly revoke: "吊销";
+            readonly revokeConfirm: {
+                readonly body: "所有使用此密钥的地方都会立即失效。此操作无法撤消。";
+                readonly confirm: "吊销密钥";
+                readonly prompt: "输入“{name}”以确认";
+                readonly title: "要吊销 {name} 吗？";
+            };
+            readonly revokeFailed: "无法吊销该密钥，它仍处于有效状态。";
+            readonly title: "有效密钥";
+            readonly untitled: "未命名密钥";
+        };
+        readonly method: {
+            readonly BATCH: {
+                readonly desc: "批量插入或 upsert，最多 500 行";
+                readonly title: "批量";
+            };
+            readonly DELETE: {
+                readonly desc: "按主键删除一行";
+                readonly title: "删除";
+            };
+            readonly GET: {
+                readonly desc: "列出多行并获取单条记录";
+                readonly title: "读取";
+            };
+            readonly PATCH: {
+                readonly desc: "按主键部分更新一行";
+                readonly title: "更新";
+            };
+            readonly POST: {
+                readonly desc: "插入新行";
+                readonly title: "创建";
+            };
+            readonly PUT: {
+                readonly desc: "按主键替换整行";
+                readonly title: "替换";
+            };
+        };
+        readonly note: {
+            readonly notRegistered: "此服务器未启用公开 API。请设置 ADMINIUM_PUBLIC_API_ORIGINS 并重启——此后在这里创建的密钥即可使用。";
+            readonly off: "公开 API 已关闭，因此目前所有密钥都无法使用。";
+            readonly offLink: "打开工作区设置";
+        };
+        readonly quick: {
+            readonly body: "在 Authorization 标头中携带密钥来认证请求。";
+            readonly title: "快速开始";
+        };
+        readonly sheet: {
+            readonly allMethods: "选择所有方法";
+            readonly app: {
+                readonly label: "应用";
+                readonly none: "无";
+            };
+            readonly cancel: "取消";
+            readonly clear: "清除";
+            readonly close: "关闭";
+            readonly count: "{permissions, plural, other {项权限}}，涉及 {endpoints, plural, other {# 个端点}}";
+            readonly deselectAll: "全部取消选择";
+            readonly edit: "编辑端点";
+            readonly expires: {
+                readonly d30: "30 天";
+                readonly d90: "90 天";
+                readonly label: "过期时间";
+                readonly never: "永不过期";
+            };
+            readonly filter: "筛选端点";
+            readonly focusMeta: "{source} · {rows} 行 · 条数限制 {limit}，排序 {order}";
+            readonly focusMetaNoRows: "{source} · 条数限制 {limit}，排序 {order}";
+            readonly footer: {
+                readonly empty: "至少选择一个方法才能创建密钥。";
+                readonly more: "另有 {n} 项";
+                readonly refused: "暂时无法创建此密钥：{issue}";
+                readonly summary: "此密钥将可以调用 {paths}";
+            };
+            readonly kind: {
+                readonly browser: "浏览器";
+                readonly label: "使用位置";
+                readonly server: "服务器";
+            };
+            readonly layout: {
+                readonly label: "布局";
+                readonly list: "列表";
+                readonly panes: "分栏";
+            };
+            readonly name: {
+                readonly label: "密钥名称";
+                readonly placeholder: "例如：订单同步 Worker";
+            };
+            readonly newEndpoint: "新建端点";
+            readonly readOnly: "只读预设";
+            readonly rowMeta: "{source} · {rows} 行";
+            readonly rowMetaNoRows: "{source}";
+            readonly selectAll: "全选";
+            readonly selectAllShort: "全选";
+            readonly submit: "创建密钥";
+            readonly subtitle: "选择此密钥可以调用的端点和方法";
+            readonly title: "创建 API 密钥";
+            readonly toggleAll: "切换所有方法";
+            readonly unsupported: "{count, plural, other {此路由未开放 {methods}。请编辑端点以启用。}}";
+        };
+        readonly stats: {
+            readonly endpoints: "端点";
+            readonly keys: "有效密钥";
+            readonly requests: "请求数 · 24 小时";
+        };
+        readonly subtitle: "管理对工作区的程序化访问";
+        readonly summary: "{endpoints, plural, other {# 个端点}} · {methods, plural, other {# 个方法}}";
+        readonly title: "API 密钥与令牌";
+    };
+    readonly surfacePages: {
+        readonly guest: {
+            readonly title: "{app} 暂时无法使用。";
+            readonly body: "请稍后再试。";
+        };
+        readonly staff: {
+            readonly appOff: "{app} 目前已关闭。";
+            readonly sideOff: "{app} 的员工界面已关闭。";
+            readonly advice: "请让你的经理在 {app} → 设置 中开启。";
+            readonly signOut: "退出登录";
+            readonly noAccess: "此账户无法打开 {app}。";
+            readonly noAccessAdvice: "请让你的主管为你分配可以打开 {app} 的角色。";
+        };
+        readonly notFound: {
+            readonly title: "找不到页面";
+            readonly body: "此地址没有内容。请检查链接后重试。";
+        };
+    };
+    readonly appSettings: {
+        readonly notInstalled: "此应用未安装";
+        readonly backToApps: "返回应用";
+        readonly statusDisabled: "已停用";
+        readonly statusUpdate: "有可用更新 · {version}";
+        readonly statusActive: "正常运行";
+        readonly version: "版本 {version} · 由 {publisher} 提供";
+        readonly open: "打开应用";
+        readonly upToDate: "已是最新";
+        readonly update: "更新";
+        readonly saveFailed: "更改未保存";
+        readonly screens: "界面组";
+        readonly sideStaff: "员工界面";
+        readonly sideCustomer: "客户界面";
+        readonly sideAppOff: "整个应用已关闭。";
+        readonly staffOnHelp: "你的团队使用自己的账户在此登录。";
+        readonly customerOnHelp: "客户使用这些页面。它们是公开的。";
+        readonly staffOffHelp: "这些界面不再提供。没有删除任何内容。";
+        readonly customerOffHelp: "客户会看到“暂不可用”。没有删除任何内容。";
+        readonly sideSwitch: "{side}，开启或关闭";
+        readonly on: "开启";
+        readonly off: "关闭";
+        readonly whereItLives: "所在位置";
+        readonly ownAddress: "使用独立地址";
+        readonly insideDashboard: "在仪表板内";
+        readonly copyAddress: "复制地址";
+        readonly copied: "已复制";
+        readonly copy: "复制";
+        readonly addDomain: "添加域名";
+        readonly preview: "预览";
+        readonly domainField: "域名";
+        readonly addDomainSave: "添加";
+        readonly data: "数据";
+        readonly noTables: "此应用不使用任何数据表。";
+        readonly rows: "{count, plural, other {# 行}}";
+        readonly activity: {
+            readonly staged: "由 {actor} 上传";
+            readonly installed: "由 {actor} 安装";
+            readonly updated: "由 {actor} 更新";
+            readonly disabled: "由 {actor} 关闭";
+            readonly enabled: "由 {actor} 开启";
+            readonly settings: "由 {actor} 更改设置";
+            readonly domains: "由 {actor} 更改域名";
+            readonly instances: "由 {actor} 更改实例";
+            readonly renamed: "由 {actor} 重命名数据表";
+            readonly title: "动态";
+            readonly none: "暂无。";
+            readonly sampleAdded: "由 {actor} 添加示例数据";
+            readonly sampleRemoved: "由 {actor} 删除示例数据";
+        };
+        readonly danger: "危险操作";
+        readonly disabledNote: "应用已关闭。启用后将完全恢复原样。";
+        readonly disableNote: "在所有地方隐藏此应用并停止其端点。不会删除任何内容。";
+        readonly enable: "启用";
+        readonly disable: "停用";
+        readonly uninstallNote: "删除应用的文件和页面。保留数据表和数据。";
+        readonly uninstall: "卸载";
+        readonly disableTitle: "停用 {app}？";
+        readonly close: "关闭";
+        readonly nothingDeleted: "不会删除任何内容。";
+        readonly enableBrings: "启用后将完全恢复原样。";
+        readonly cancel: "取消";
+        readonly disableLine1: "其菜单区域对所有人隐藏。";
+        readonly disableLine2: "其界面和自有端点停止响应。";
+        readonly disableLine3: "数据表、记录和设置保持不变。";
+        readonly crumb: "应用";
+        readonly sampleLedger: "Adminium 的示例记录清单";
+    };
+    readonly uninstall: {
+        readonly files: "应用的文件";
+        readonly pages: "{count, plural, other {# 个页面}}";
+        readonly keys: "{count, plural, other {其 # 个浏览器密钥}}";
+        readonly settings: "其设置";
+        readonly hosts: "{count, plural, other {其 # 个域名}}";
+        readonly tables: "{count, plural, other {# 个数据表及其全部记录}}";
+        readonly editedPages: "你编辑过的页面会作为普通页面保留";
+        readonly audit: "其在审计日志中的记录";
+        readonly title: "卸载 {app}？";
+        readonly close: "关闭";
+        readonly planFailed: "无法读取将被移除的内容";
+        readonly removed: "移除";
+        readonly kept: "保留";
+        readonly roleCascade: "移除此角色会将其从 {members, plural, other {# 人}} 身上撤下，并删除绑定到它的 {keys, plural, other {# 个 API 密钥}}。这些密钥会立即失效。";
+        readonly dropTitle: "同时删除其数据表和数据";
+        readonly dropBody: "{count, plural, other {删除它创建的 # 个数据表及其全部记录。}}此操作无法撤销。";
+        readonly typeKey: "输入应用的键 {key} 以确认。";
+        readonly failed: "应用未被卸载";
+        readonly cancel: "取消";
+        readonly confirmDrop: "卸载并删除数据";
+        readonly confirm: "卸载";
+        readonly rules: "{count, plural, other {它的 # 条列规则}}";
+    };
+    readonly sampleData: {
+        readonly title: "示例数据";
+        readonly add: "添加示例数据";
+        readonly installNote: "在应用的数据表中加入一些示例记录，方便你试用。可以一键删除。";
+        readonly remove: "删除示例数据";
+        readonly keptNotice: "{count, plural, other {保留了 # 条示例记录：你自己的记录在使用它们，或你修改过它们。}}";
+        readonly notLoaded: "未加载";
+        readonly loadedCount: "已加载 · {count, plural, other {# 条记录}}";
+        readonly loaded: "已加载 · {count, plural, other {# 条记录}} · {date}";
+        readonly addSubtitle: "添加到 {connection}";
+        readonly close: "关闭";
+        readonly addBodyNoConnection: "在应用的数据表中加入一些示例记录。不会改动其他任何内容。";
+        readonly addBody: "在应用的数据表中加入一些示例记录。{connection} 中的其他内容不会改动。";
+        readonly images: "图片，添加到文件";
+        readonly total: "合计";
+        readonly records: "{count, plural, other {# 条记录}}";
+        readonly none: "此应用没有附带示例数据";
+        readonly adding: "正在添加示例数据";
+        readonly addFailed: "示例数据未添加";
+        readonly addFailedBody: "示例数据未添加。没有写入任何内容。";
+        readonly cancel: "取消";
+        readonly removeSubtitle: "{count, plural, other {{date} 添加的 # 条记录}}";
+        readonly removeBody: "Adminium 记录了它添加的每一条记录，因此只会删除这些记录。";
+        readonly planFailed: "无法读取将要删除的内容";
+        readonly removes: "将删除";
+        readonly kept: "将保留";
+        readonly usedBy: "{count, plural, other {被你自己的 # 条记录使用}}";
+        readonly keepChanged: "保留我修改过的记录";
+        readonly changedList: "{count, plural, other {你编辑过的 # 条示例记录：{names}。}}";
+        readonly removeFailed: "示例数据未删除";
+        readonly removeConfirm: "删除";
+        readonly banner: "示例数据已加载";
+        readonly bannerRemove: "删除";
+    };
+    readonly appPublicAccess: {
+        readonly title: "公开访问";
+        readonly intro: "该应用的客户界面需要：";
+        readonly availability: "读取 {table} 的空闲或已满时段";
+        readonly claim: "按 {fields} 查找自己的 {table}";
+        readonly create: "添加到 {table}";
+        readonly update: "更改 {table}";
+        readonly read: "读取 {table}";
+        readonly later: "将在以后的版本中提供";
+        readonly allow: "允许此公开访问";
+        readonly helper: "以后可以在 API 密钥页面中缩小范围。";
+        readonly cannotGrant: "只有可以管理 API 密钥的人才能允许它，因此该应用将在没有它的情况下安装。";
+        readonly warning: {
+            readonly apiOff: "公开 API 已关闭，在开启之前这些都不会响应。";
+            readonly originSelf: "允许的来源不包括 “self”，因此该应用在此服务器上的页面无法调用它。";
+            readonly timeZone: "此数据库未设置时区，而公开 API 需要时区来处理日期和时间。";
+            readonly noEmail: "尚未设置电子邮件，因此不会向客人发送确认。";
+        };
+        readonly createConfirmed: "添加到 {table}，并收到确认邮件";
+    };
 };
 export default _default;
 //# sourceMappingURL=studio.d.ts.map