@1delta/margin-fetcher 0.0.341 → 0.0.342

package/dist/lending/user-data/morpho/fetchUserPositionsFromSubgraph.d.ts

@@ -1,44 +0,0 @@
-import { type RelayProxyConfig } from '@1delta/proxy-fetch';
-/**
- * Back-compat alias. New callers should use `RelayProxyConfig` directly from
- * `@1delta/proxy-fetch`.
- */
-export type MorphoSubgraphProxyConfig = RelayProxyConfig;
-export interface MorphoUserMarketBalance {
-    /** 0x-prefixed lowercase 66-char market key */
-    marketId: string;
-    /** Raw supply shares as decimal string */
-    supplyShares: string;
-    /** Raw borrow shares as decimal string */
-    borrowShares: string;
-    /** Raw collateral amount as decimal string */
-    collateral: string;
-}
-export declare function hasMorphoUserSubgraph(chainId: string): boolean;
-export declare function hasMorphoUserApi(chainId: string): boolean;
-export declare function hasMorphoPositionIndex(chainId: string): boolean;
-/**
- * Fetches per-market balance data (supply shares, borrow shares, collateral)
- * for all markets where the account has active positions. Queries the Goldsky
- * subgraph or the Morpho Blue API depending on the chain.
- *
- * Returns undefined when the chain has no index OR the request fails (timeout,
- * non-2xx, etc.) — caller should fall back to querying all markets on-chain.
- * Returns an empty array when the account has no positions on that chain.
- *
- * Concurrent callers for the same (chainId, account) share a single upstream
- * request, and results are memoized for a short window (see `CACHE_TTL_MS`).
- */
-export declare function fetchMorphoUserBalances(chainId: string, account: string, proxyConfig?: RelayProxyConfig): Promise<MorphoUserMarketBalance[] | undefined>;
-/**
- * Convenience wrapper — returns only the set of market IDs where the account
- * has active positions. Use `fetchMorphoUserBalances` when you also need the
- * shares/collateral amounts.
- */
-export declare function fetchMorphoUserPositionMarkets(chainId: string, account: string, proxyConfig?: RelayProxyConfig): Promise<Set<string> | undefined>;
-/**
- * Test-only helper: drops the in-memory cache so assertions don't interact
- * across tests. Safe to call at runtime, just wastes the next upstream call.
- */
-export declare function __clearMorphoPositionCacheForTests(): void;
-//# sourceMappingURL=fetchUserPositionsFromSubgraph.d.ts.map

package/dist/lending/user-data/morpho/fetchUserPositionsFromSubgraph.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"fetchUserPositionsFromSubgraph.d.ts","sourceRoot":"","sources":["../../../../src/lending/user-data/morpho/fetchUserPositionsFromSubgraph.ts"],"names":[],"mappings":"AACA,OAAO,EAAoB,KAAK,gBAAgB,EAAE,MAAM,qBAAqB,CAAA;AAE7E;;;GAGG;AACH,MAAM,MAAM,yBAAyB,GAAG,gBAAgB,CAAA;AAExD,MAAM,WAAW,uBAAuB;IACtC,+CAA+C;IAC/C,QAAQ,EAAE,MAAM,CAAA;IAChB,0CAA0C;IAC1C,YAAY,EAAE,MAAM,CAAA;IACpB,0CAA0C;IAC1C,YAAY,EAAE,MAAM,CAAA;IACpB,8CAA8C;IAC9C,UAAU,EAAE,MAAM,CAAA;CACnB;AAgOD,wBAAgB,qBAAqB,CAAC,OAAO,EAAE,MAAM,GAAG,OAAO,CAE9D;AAED,wBAAgB,gBAAgB,CAAC,OAAO,EAAE,MAAM,GAAG,OAAO,CAEzD;AAED,wBAAgB,sBAAsB,CAAC,OAAO,EAAE,MAAM,GAAG,OAAO,CAE/D;AAED;;;;;;;;;;;GAWG;AACH,wBAAsB,uBAAuB,CAC3C,OAAO,EAAE,MAAM,EACf,OAAO,EAAE,MAAM,EACf,WAAW,CAAC,EAAE,gBAAgB,GAC7B,OAAO,CAAC,uBAAuB,EAAE,GAAG,SAAS,CAAC,CAYhD;AAED;;;;GAIG;AACH,wBAAsB,8BAA8B,CAClD,OAAO,EAAE,MAAM,EACf,OAAO,EAAE,MAAM,EACf,WAAW,CAAC,EAAE,gBAAgB,GAC7B,OAAO,CAAC,GAAG,CAAC,MAAM,CAAC,GAAG,SAAS,CAAC,CAIlC;AA+FD;;;GAGG;AACH,wBAAgB,kCAAkC,IAAI,IAAI,CAGzD"}

package/dist/lending/user-data/morpho/index.d.ts

@@ -1,5 +0,0 @@
-export * from './decoder';
-export * from './types';
-export * from './userCallBuild';
-export * from './fetchUserPositionsFromSubgraph';
-//# sourceMappingURL=index.d.ts.map

package/dist/lending/user-data/morpho/index.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"index.d.ts","sourceRoot":"","sources":["../../../../src/lending/user-data/morpho/index.ts"],"names":[],"mappings":"AAAA,cAAc,WAAW,CAAA;AACzB,cAAc,SAAS,CAAA;AACvB,cAAc,iBAAiB,CAAA;AAC/B,cAAc,kCAAkC,CAAA"}

package/dist/lending/user-data/morpho/morphoLib.d.ts

@@ -1,5 +0,0 @@
-export declare function toSharesDown(assets: bigint, totalAssets: bigint, totalShares: bigint): bigint;
-export declare function toAssetsDown(shares: bigint, totalAssets: bigint, totalShares: bigint): bigint;
-export declare function toSharesUp(assets: bigint, totalAssets: bigint, totalShares: bigint): bigint;
-export declare function toAssetsUp(shares: bigint, totalAssets: bigint, totalShares: bigint): bigint;
-//# sourceMappingURL=morphoLib.d.ts.map

package/dist/lending/user-data/morpho/morphoLib.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"morphoLib.d.ts","sourceRoot":"","sources":["../../../../src/lending/user-data/morpho/morphoLib.ts"],"names":[],"mappings":"AAYA,wBAAgB,YAAY,CAC1B,MAAM,EAAE,MAAM,EACd,WAAW,EAAE,MAAM,EACnB,WAAW,EAAE,MAAM,GAClB,MAAM,CAMR;AAED,wBAAgB,YAAY,CAC1B,MAAM,EAAE,MAAM,EACd,WAAW,EAAE,MAAM,EACnB,WAAW,EAAE,MAAM,GAClB,MAAM,CAMR;AAED,wBAAgB,UAAU,CACxB,MAAM,EAAE,MAAM,EACd,WAAW,EAAE,MAAM,EACnB,WAAW,EAAE,MAAM,GAClB,MAAM,CAMR;AAED,wBAAgB,UAAU,CACxB,MAAM,EAAE,MAAM,EACd,WAAW,EAAE,MAAM,EACnB,WAAW,EAAE,MAAM,GAClB,MAAM,CAMR"}

package/dist/lending/user-data/morpho/types.d.ts

@@ -1,12 +0,0 @@
-export declare enum MorphoPositionParams {
-    supplyShares = 0,
-    borrowShares = 1,
-    collateral = 2
-}
-export declare enum MorphoMarketParams {
-    totalSupplyAssets = 0,
-    totalSupplyShares = 1,
-    totalBorrowAssets = 2,
-    totalBorrowShares = 3
-}
-//# sourceMappingURL=types.d.ts.map

package/dist/lending/user-data/morpho/types.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"types.d.ts","sourceRoot":"","sources":["../../../../src/lending/user-data/morpho/types.ts"],"names":[],"mappings":"AAAA,oBAAY,oBAAoB;IAC9B,YAAY,IAAI;IAChB,YAAY,IAAA;IACZ,UAAU,IAAA;CACX;AAED,oBAAY,kBAAkB;IAC5B,iBAAiB,IAAI;IACrB,iBAAiB,IAAA;IACjB,iBAAiB,IAAA;IACjB,iBAAiB,IAAA;CAClB"}

package/dist/lending/user-data/morpho/userCallBuild.d.ts

@@ -1,8 +0,0 @@
-import { Call } from '../../../utils/multicall';
-export declare const MORPHO_LENS: {
-    [c: string]: string;
-};
-export declare const buildMorphoUserCallWithLens: (chainId: string, account: string, lender: string, marketsToQuery: string[]) => Call[];
-export declare const buildMorphoTypeUserCallWithLens: (chainId: string, account: string, lender: string, marketsToQuery: string[], getClient?: (chainId: string, rpcId?: number) => any) => Call[] | Promise<Call[]>;
-export declare const buildListaUserCallWithLens: (chainId: string, account: string, lender: string, marketsToQuery: string[], getClient?: (chainId: string, rpcId?: number) => any) => Promise<Call[]>;
-//# sourceMappingURL=userCallBuild.d.ts.map

package/dist/lending/user-data/morpho/userCallBuild.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"userCallBuild.d.ts","sourceRoot":"","sources":["../../../../src/lending/user-data/morpho/userCallBuild.ts"],"names":[],"mappings":"AAEA,OAAO,EAAE,IAAI,EAAE,MAAM,0BAA0B,CAAA;AAQ/C,eAAO,MAAM,WAAW,EAAE;IAAE,CAAC,CAAC,EAAE,MAAM,GAAG,MAAM,CAAA;CA2B9C,CAAA;AAED,eAAO,MAAM,2BAA2B,GACtC,SAAS,MAAM,EACf,SAAS,MAAM,EACf,QAAQ,MAAM,EACd,gBAAgB,MAAM,EAAE,KACvB,IAAI,EAeN,CAAA;AAED,eAAO,MAAM,+BAA+B,GAC1C,SAAS,MAAM,EACf,SAAS,MAAM,EACf,QAAQ,MAAM,EACd,gBAAgB,MAAM,EAAE,EACxB,YAAY,CAAC,OAAO,EAAE,MAAM,EAAE,KAAK,CAAC,EAAE,MAAM,KAAK,GAAG,KACnD,IAAI,EAAE,GAAG,OAAO,CAAC,IAAI,EAAE,CAIzB,CAAA;AAED,eAAO,MAAM,0BAA0B,GACrC,SAAS,MAAM,EACf,SAAS,MAAM,EACf,QAAQ,MAAM,EACd,gBAAgB,MAAM,EAAE,EACxB,YAAY,CAAC,OAAO,EAAE,MAAM,EAAE,KAAK,CAAC,EAAE,MAAM,KAAK,GAAG,KACnD,OAAO,CAAC,IAAI,EAAE,CA2BhB,CAAA"}

package/dist/lending/user-data/morpho/userCallParse.d.ts

@@ -1,23 +0,0 @@
-import { MorphoUserReserveResponse } from '../../../types/lenderTypes';
-import { BalanceInfo } from './decoder';
-import { LenderCrossPoolMeta, LenderToLenderCrossPoolMeta, UserData } from '../utils/types';
-import { ListaBrokerUserData } from '../../public-data/lista/listaBroker';
-export declare const getMorphoTypeUserDataConverterWithlens: (lender: string, chainId: string, account: string, markets: string[], metaMap?: LenderToLenderCrossPoolMeta) => [(data: any[]) => {
-    [lenderKey: string]: UserData;
-} | undefined, number] | [(data: any[]) => {
-    [market: string]: MorphoUserReserveResponse;
-} | undefined, number];
-export declare const getMorphoUserDataConverterWithlens: (lender: string, chainId: string, account: string, markets: string[], metaMap?: LenderToLenderCrossPoolMeta) => [(data: any[]) => {
-    [lenderKey: string]: UserData;
-} | undefined, number];
-export declare const getListaUserDataConverterWithlens: (lender: string, chainId: string, account: string, markets: string[], metaMap?: LenderToLenderCrossPoolMeta) => [(data: any[]) => {
-    [market: string]: MorphoUserReserveResponse;
-} | undefined, number];
-export declare function createMorphoEntryFromMarketWithLens(balanceInfo: BalanceInfo, metaMap: LenderCrossPoolMeta | undefined, chainId: string, lenderKey: string, brokerData?: ListaBrokerUserData): {
-    dataForMarket: {
-        [x: string]: any;
-    };
-    addedDeposits: number;
-    addedDebt: number;
-};
-//# sourceMappingURL=userCallParse.d.ts.map

package/dist/lending/user-data/morpho/userCallParse.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"userCallParse.d.ts","sourceRoot":"","sources":["../../../../src/lending/user-data/morpho/userCallParse.ts"],"names":[],"mappings":"AAAA,OAAO,EACL,yBAAyB,EAE1B,MAAM,4BAA4B,CAAA;AAOnC,OAAO,EACL,WAAW,EAGZ,MAAM,WAAW,CAAA;AAGlB,OAAO,EACL,mBAAmB,EACnB,2BAA2B,EAE3B,QAAQ,EACT,MAAM,gBAAgB,CAAA;AAEvB,OAAO,EAEL,mBAAmB,EACpB,MAAM,qCAAqC,CAAA;AAuD5C,eAAO,MAAM,sCAAsC,GACjD,QAAQ,MAAM,EACd,SAAS,MAAM,EACf,SAAS,MAAM,EACf,SAAS,MAAM,EAAE,EACjB,UAAU,2BAA2B,aAyB5B,GAAG,EAAE,KAAK;IAAE,CAAC,SAAS,EAAE,MAAM,GAAG,QAAQ,CAAA;CAAE,GAAG,SAAS,oBAmFzD,GAAG,EAAE,KAAK;IAAE,CAAC,MAAM,EAAE,MAAM,GAAG,yBAAyB,CAAA;CAAE,GAAG,SAAS,SA3F7E,CAAA;AAED,eAAO,MAAM,kCAAkC,GAC7C,QAAQ,MAAM,EACd,SAAS,MAAM,EACf,SAAS,MAAM,EACf,SAAS,MAAM,EAAE,EACjB,UAAU,2BAA2B,KACpC,CAAC,CAAC,IAAI,EAAE,GAAG,EAAE,KAAK;IAAE,CAAC,SAAS,EAAE,MAAM,GAAG,QAAQ,CAAA;CAAE,GAAG,SAAS,EAAE,MAAM,CA0EzE,CAAA;AAED,eAAO,MAAM,iCAAiC,GAC5C,QAAQ,MAAM,EACd,SAAS,MAAM,EACf,SAAS,MAAM,EACf,SAAS,MAAM,EAAE,EACjB,UAAU,2BAA2B,KACpC,CACD,CAAC,IAAI,EAAE,GAAG,EAAE,KAAK;IAAE,CAAC,MAAM,EAAE,MAAM,GAAG,yBAAyB,CAAA;CAAE,GAAG,SAAS,EAC5E,MAAM,CAuGP,CAAA;AAED,wBAAgB,mCAAmC,CACjD,WAAW,EAAE,WAAW,EACxB,OAAO,EAAE,mBAAmB,GAAG,SAAS,EACxC,OAAO,EAAE,MAAM,EACf,SAAS,EAAE,MAAM,EACjB,UAAU,CAAC,EAAE,mBAAmB;;;;;;EAqNjC"}

package/dist/lending/user-data/river/userCall.test.d.ts

@@ -1,2 +0,0 @@
-export {};
-//# sourceMappingURL=userCall.test.d.ts.map

package/dist/lending/user-data/river/userCall.test.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"userCall.test.d.ts","sourceRoot":"","sources":["../../../../src/lending/user-data/river/userCall.test.ts"],"names":[],"mappings":""}

package/dist/lending/user-data/river/userCallBuild.d.ts

@@ -1,16 +0,0 @@
-import { Call } from '../../../utils/multicall';
-/**
- * User-data call build for River (Satoshi Protocol). Troves are keyed by
- * OWNER ADDRESS — one per user per TroveManager — so there is NO discovery
- * phase and the layout is fully deterministic from config:
- *
- * per market (config order):
- *   TroveManager.getEntireDebtAndColl(account)   (incl. pending redistribution)
- *   TroveManager.getTroveStatus(account)
- *   TroveManager.surplusBalances(account)        (post-liquidation claimable)
- * then once per chain:
- *   XApp.getCompoundedDebtDeposit(account)       (single StabilityPool)
- */
-export declare const RIVER_CALLS_PER_MARKET = 3;
-export declare const buildRiverUserCall: (chainId: string, lender: string, account: string) => Call[];
-//# sourceMappingURL=userCallBuild.d.ts.map

package/dist/lending/user-data/river/userCallBuild.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"userCallBuild.d.ts","sourceRoot":"","sources":["../../../../src/lending/user-data/river/userCallBuild.ts"],"names":[],"mappings":"AACA,OAAO,EAAE,IAAI,EAAE,MAAM,0BAA0B,CAAA;AAE/C;;;;;;;;;;;GAWG;AACH,eAAO,MAAM,sBAAsB,IAAI,CAAA;AAEvC,eAAO,MAAM,kBAAkB,GAC7B,SAAS,MAAM,EACf,QAAQ,MAAM,EACd,SAAS,MAAM,KACd,IAAI,EAoBN,CAAA"}

package/dist/lending/user-data/river/userCallParse.d.ts

@@ -1,24 +0,0 @@
-import { LenderToLenderCrossPoolMeta, UserData } from '../utils/types';
-/** Per-market position detail attached to the debt row (raw strings). */
-export interface RiverPositionInfo {
-    /** TroveManager (market) index. */
-    index: number;
-    /** Post-liquidation/redemption collateral surplus claimable via claimCollateral. */
-    collateralSurplus: string;
-}
-/**
- * Returns a [converter, expectedCallCount] tuple for River user data.
- *
- * Layout mirrors `buildRiverUserCall` (deterministic from config — no
- * discovery cache needed). Emits one `UserData` per market key
- * `RIVER_<chainId>_<TM_INDEX>`, each with a single sub-account `'0'` (troves are
- * address-keyed: at most ONE per user per market): collateral row
- * (entire coll incl. pending redistribution) + satUSD debt row (entire debt)
- * with `riverInfo` (collateral surplus). The single per-chain StabilityPool
- * deposit is attached as an `sp` sub-account on market index 0 (matching the
- * public-data convention).
- */
-export declare const getRiverUserDataConverter: (lender: string, chainId: string, account: string, meta?: LenderToLenderCrossPoolMeta) => [(data: any[]) => {
-    [lender: string]: UserData;
-} | undefined, number];
-//# sourceMappingURL=userCallParse.d.ts.map

package/dist/lending/user-data/river/userCallParse.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"userCallParse.d.ts","sourceRoot":"","sources":["../../../../src/lending/user-data/river/userCallParse.ts"],"names":[],"mappings":"AAMA,OAAO,EAEL,2BAA2B,EAC3B,QAAQ,EACT,MAAM,gBAAgB,CAAA;AAIvB,yEAAyE;AACzE,MAAM,WAAW,iBAAiB;IAChC,mCAAmC;IACnC,KAAK,EAAE,MAAM,CAAA;IACb,oFAAoF;IACpF,iBAAiB,EAAE,MAAM,CAAA;CAC1B;AAcD;;;;;;;;;;;GAWG;AACH,eAAO,MAAM,yBAAyB,GACpC,QAAQ,MAAM,EACd,SAAS,MAAM,EACf,SAAS,MAAM,EACf,OAAO,2BAA2B,KACjC,CAAC,CAAC,IAAI,EAAE,GAAG,EAAE,KAAK;IAAE,CAAC,MAAM,EAAE,MAAM,GAAG,QAAQ,CAAA;CAAE,GAAG,SAAS,EAAE,MAAM,CAiJtE,CAAA"}

package/dist/lending/user-data/silo-v2/userCallBuild.d.ts

@@ -1,21 +0,0 @@
-import { Call } from '../../../utils/multicall';
-/**
- * Per Silo v2 pair we emit 10 user-data calls (5 per side):
- *   silo.balanceOf(account)                            — collateral shares
- *   protectedShareToken.balanceOf(account)              — protected shares
- *   silo.convertToAssets(10^decimals, COLLATERAL)       — collateral rate
- *   silo.convertToAssets(10^decimals, PROTECTED)        — protected rate
- *   silo.maxRepay(account)                              — debt (assets)
- *
- * We do NOT use `maxWithdraw(account)` because it is health-constrained
- * and returns 0 for fully-leveraged positions.
- *
- * The `convertToAssets` calls use the 2-arg overload with a per-call `abi`
- * override (`SiloConvertToAssetsTypedAbi`) because viem cannot disambiguate
- * overloaded function names within a single ABI. Same pattern as
- * `CreamLensV2Abi` in compound-v2. The e2e layer picks `call.abi ?? abi`.
- */
-export declare const SILO_V2_USER_CALLS_PER_SIDE = 5;
-export declare const SILO_V2_USER_CALLS_PER_PAIR: number;
-export declare const buildSiloV2UserCall: (chainId: string, lender: string, account: string) => Call[];
-//# sourceMappingURL=userCallBuild.d.ts.map

package/dist/lending/user-data/silo-v2/userCallBuild.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"userCallBuild.d.ts","sourceRoot":"","sources":["../../../../src/lending/user-data/silo-v2/userCallBuild.ts"],"names":[],"mappings":"AAEA,OAAO,EAAE,IAAI,EAAE,MAAM,0BAA0B,CAAA;AAQ/C;;;;;;;;;;;;;;;GAeG;AACH,eAAO,MAAM,2BAA2B,IAAI,CAAA;AAC5C,eAAO,MAAM,2BAA2B,QAAkC,CAAA;AAE1E,eAAO,MAAM,mBAAmB,GAC9B,SAAS,MAAM,EACf,QAAQ,MAAM,EACd,SAAS,MAAM,KACd,IAAI,EA2CN,CAAA"}

package/dist/lending/user-data/silo-v2/userCallParse.d.ts

@@ -1,23 +0,0 @@
-import { LenderCrossPoolMeta, UserData } from '../utils/types';
-/**
- * Returns a [converter, expectedCallCount] tuple for Silo v2 user data.
- *
- * Result layout (10 slots per pair, 5 per side):
- *   [collateralShares0, protectedShares0, collateralRate0, protectedRate0, maxRepay0,
- *    collateralShares1, protectedShares1, collateralRate1, protectedRate1, maxRepay1]
- *
- * Deposits are computed off-chain per deposit type with separate rates:
- *   collateralAssets = collateralShares * collateralRate / 10^decimals
- *   protectedAssets  = protectedShares  * protectedRate  / 10^decimals
- *   totalDeposits    = collateralAssets + protectedAssets
- *
- * Rates differ because collateral deposits accrue borrower interest while
- * protected deposits don't.
- *
- * `collateralEnabled` is set to `true` when the silo has deposits and its
- * `lt > 0` (its side can back borrows on the other silo).
- *
- * Aggregation goes through `createBaseTypeUserState` using config mode `'0'`.
- */
-export declare const getSiloV2UserDataConverter: (lender: string, chainId: string, account: string, metaMap?: LenderCrossPoolMeta) => [(data: any[]) => UserData | undefined, number];
-//# sourceMappingURL=userCallParse.d.ts.map

package/dist/lending/user-data/silo-v2/userCallParse.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"userCallParse.d.ts","sourceRoot":"","sources":["../../../../src/lending/user-data/silo-v2/userCallParse.ts"],"names":[],"mappings":"AAKA,OAAO,EAAE,mBAAmB,EAAE,QAAQ,EAAE,MAAM,gBAAgB,CAAA;AAM9D;;;;;;;;;;;;;;;;;;;GAmBG;AACH,eAAO,MAAM,0BAA0B,GACrC,QAAQ,MAAM,EACd,SAAS,MAAM,EACf,SAAS,MAAM,EACf,UAAU,mBAAmB,KAC5B,CAAC,CAAC,IAAI,EAAE,GAAG,EAAE,KAAK,QAAQ,GAAG,SAAS,EAAE,MAAM,CA6HhD,CAAA"}

package/dist/lending/user-data/silo-v3/userCallBuild.d.ts

@@ -1,5 +0,0 @@
-import { Call } from '../../../utils/multicall';
-export declare const SILO_V3_USER_CALLS_PER_SIDE = 5;
-export declare const SILO_V3_USER_CALLS_PER_PAIR: number;
-export declare const buildSiloV3UserCall: (chainId: string, lender: string, account: string) => Call[];
-//# sourceMappingURL=userCallBuild.d.ts.map

package/dist/lending/user-data/silo-v3/userCallBuild.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"userCallBuild.d.ts","sourceRoot":"","sources":["../../../../src/lending/user-data/silo-v3/userCallBuild.ts"],"names":[],"mappings":"AAEA,OAAO,EAAE,IAAI,EAAE,MAAM,0BAA0B,CAAA;AA0B/C,eAAO,MAAM,2BAA2B,IAAI,CAAA;AAC5C,eAAO,MAAM,2BAA2B,QAAkC,CAAA;AAE1E,eAAO,MAAM,mBAAmB,GAC9B,SAAS,MAAM,EACf,QAAQ,MAAM,EACd,SAAS,MAAM,KACd,IAAI,EA2CN,CAAA"}

package/dist/lending/user-data/silo-v3/userCallParse.d.ts

@@ -1,30 +0,0 @@
-import { LenderCrossPoolMeta, UserData } from '../utils/types';
-/**
- * Returns a [converter, expectedCallCount] tuple for Silo v3 user data.
- *
- * v3 reuses the v2 read interface byte-for-byte, so this parser is a
- * structural mirror of `silo-v2/userCallParse.ts` — only the registry
- * lookup (`getSiloV3MarketEntry`) and the per-pair lender key prefix
- * differ. See [silo-v2/README.md](../silo-v2/README.md) for the
- * `LenderCrossPoolMeta` field audit; the same audit applies verbatim to
- * v3.
- *
- * Result layout (10 slots per pair, 5 per side):
- *   [collateralShares0, protectedShares0, collateralRate0, protectedRate0, maxRepay0,
- *    collateralShares1, protectedShares1, collateralRate1, protectedRate1, maxRepay1]
- *
- * Deposits are computed off-chain per deposit type with separate rates:
- *   collateralAssets = collateralShares * collateralRate / 10^decimals
- *   protectedAssets  = protectedShares  * protectedRate  / 10^decimals
- *   totalDeposits    = collateralAssets + protectedAssets
- *
- * Rates differ because collateral deposits accrue borrower interest while
- * protected deposits don't.
- *
- * `collateralEnabled` is set to `true` when the silo has deposits and its
- * `lt > 0` (its side can back borrows on the other silo).
- *
- * Aggregation goes through `createBaseTypeUserState` using config mode `'0'`.
- */
-export declare const getSiloV3UserDataConverter: (lender: string, chainId: string, account: string, metaMap?: LenderCrossPoolMeta) => [(data: any[]) => UserData | undefined, number];
-//# sourceMappingURL=userCallParse.d.ts.map

package/dist/lending/user-data/silo-v3/userCallParse.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"userCallParse.d.ts","sourceRoot":"","sources":["../../../../src/lending/user-data/silo-v3/userCallParse.ts"],"names":[],"mappings":"AAKA,OAAO,EAAE,mBAAmB,EAAE,QAAQ,EAAE,MAAM,gBAAgB,CAAA;AAM9D;;;;;;;;;;;;;;;;;;;;;;;;;;GA0BG;AACH,eAAO,MAAM,0BAA0B,GACrC,QAAQ,MAAM,EACd,SAAS,MAAM,EACf,SAAS,MAAM,EACf,UAAU,mBAAmB,KAC5B,CAAC,CAAC,IAAI,EAAE,GAAG,EAAE,KAAK,QAAQ,GAAG,SAAS,EAAE,MAAM,CA2HhD,CAAA"}

package/dist/lending/user-data/summary/buildPortfolioTotals.d.ts

@@ -1,19 +0,0 @@
-import { PortfolioTotals, UserDataResult } from './types';
-/**
- * Builds only portfolio totals - lightweight version without per-lender breakdown
- * Skips position extraction and lender summary objects for better performance
- *
- * @param userDataResult - The result from convertLenderUserDataResult or getLenderUserDataMulti
- * @returns PortfolioTotals with aggregated totals and weighted APRs
- *
- * @example
- * ```typescript
- * const userData = await getLenderUserDataMulti(account, chainQueries, lenderState)
- * const totals = buildPortfolioTotals(userData)
- *
- * console.log(`Net worth: $${totals.balanceData.nav.toFixed(2)}`)
- * console.log(`Net APR: ${totals.aprData.apr.toFixed(2)}%`)
- * ```
- */
-export declare function buildPortfolioTotals(userDataResult: UserDataResult): PortfolioTotals;
-//# sourceMappingURL=buildPortfolioTotals.d.ts.map

package/dist/lending/user-data/summary/buildPortfolioTotals.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"buildPortfolioTotals.d.ts","sourceRoot":"","sources":["../../../../src/lending/user-data/summary/buildPortfolioTotals.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,eAAe,EAAE,cAAc,EAAE,MAAM,SAAS,CAAA;AAOzD;;;;;;;;;;;;;;;GAeG;AACH,wBAAgB,oBAAoB,CAClC,cAAc,EAAE,cAAc,GAC7B,eAAe,CAwEjB"}

package/dist/lending/user-data/summary/buildSummaries.d.ts

@@ -1,28 +0,0 @@
-import { LenderDataEntry, PortfolioSummary, UserDataResult } from './types';
-/**
- * Builds portfolio summaries from user data results
- *
- * @param userDataResult - The result from convertLenderUserDataResult or getLenderUserDataMulti
- * @returns PortfolioSummary with aggregated data across all lenders and chains
- *
- * @example
- * ```typescript
- * const userData = await getLenderUserDataMulti(account, chainQueries, lenderState)
- * const summary = buildSummaries(userData)
- *
- * console.log(`Total net worth: $${summary.balanceData.nav.toFixed(2)}`)
- * console.log(`Overall leverage: ${summary.leverage.toFixed(2)}x`)
- * console.log(`Net APR: ${summary.aprData.apr.toFixed(2)}%`)
- * ```
- */
-export declare function buildSummaries(userDataResult: UserDataResult): PortfolioSummary;
-/**
- * Filters portfolio summary to only include lenders with non-zero positions
- */
-export declare function filterActiveLenders(summary: PortfolioSummary): PortfolioSummary;
-/**
- * Fuses UserData entries with their LenderSummary counterparts into
- * a flat array of LenderDataEntry objects, sorted by nav descending.
- */
-export declare function fuseLenderData(userDataResult: UserDataResult, summary: PortfolioSummary): LenderDataEntry[];
-//# sourceMappingURL=buildSummaries.d.ts.map

package/dist/lending/user-data/summary/buildSummaries.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"buildSummaries.d.ts","sourceRoot":"","sources":["../../../../src/lending/user-data/summary/buildSummaries.ts"],"names":[],"mappings":"AACA,OAAO,EAEL,eAAe,EAEf,gBAAgB,EAGhB,cAAc,EACf,MAAM,SAAS,CAAA;AAoGhB;;;;;;;;;;;;;;;GAeG;AACH,wBAAgB,cAAc,CAC5B,cAAc,EAAE,cAAc,GAC7B,gBAAgB,CAuGlB;AAED;;GAEG;AACH,wBAAgB,mBAAmB,CACjC,OAAO,EAAE,gBAAgB,GACxB,gBAAgB,CAUlB;AAED;;;GAGG;AACH,wBAAgB,cAAc,CAC5B,cAAc,EAAE,cAAc,EAC9B,OAAO,EAAE,gBAAgB,GACxB,eAAe,EAAE,CAwBnB"}

package/dist/lending/user-data/summary/index.d.ts

@@ -1,5 +0,0 @@
-export * from './types';
-export * from './utils';
-export * from './buildPortfolioTotals';
-export * from './buildSummaries';
-//# sourceMappingURL=index.d.ts.map

package/dist/lending/user-data/summary/index.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"index.d.ts","sourceRoot":"","sources":["../../../../src/lending/user-data/summary/index.ts"],"names":[],"mappings":"AAAA,cAAc,SAAS,CAAA;AACvB,cAAc,SAAS,CAAA;AACvB,cAAc,wBAAwB,CAAA;AACtC,cAAc,kBAAkB,CAAA"}

package/dist/lending/user-data/summary/types.d.ts

@@ -1,104 +0,0 @@
-import { AprData, BalanceData, UserConfig } from '../fetch-balances/types';
-import { LenderInfo, UserData, UserDataForSubAccount } from '../utils/types';
-/**
- * Summary-level balance data.
- * Same shape as BalanceData but without discounted/adjusted fields
- * that are only meaningful at the sub-account risk level.
- */
-export interface SummaryBalanceData {
-    deposits: number;
-    debt: number;
-    collateral: number;
-    collateralAllActive: number;
-    nav: number;
-    deposits24h: number;
-    debt24h: number;
-    nav24h: number;
-    rewards?: any;
-}
-/**
- * Summary-level APR data (same shape as AprData).
- */
-export interface SummaryAprData {
-    apr: number;
-    depositApr: number;
-    borrowApr: number;
-    rewardApr: number;
-    rewardDepositApr: number;
-    rewardBorrowApr: number;
-    intrinsicApr: number;
-    intrinsicDepositApr: number;
-    intrinsicBorrowApr: number;
-    rewards: any;
-}
-/**
- * Summary for a sub-account within a lender
- */
-export interface SubAccountSummary {
-    accountId: string;
-    health: number | null;
-    balanceData: BalanceData;
-    aprData: AprData;
-    userConfig: UserConfig;
-    positionCount: number;
-}
-/**
- * Summary for a single lender/market
- */
-export interface LenderSummary {
-    lender: string;
-    chainId: string;
-    balanceData: SummaryBalanceData;
-    aprData: SummaryAprData;
-    /** Leverage ratio (deposits / (deposits - debt)) */
-    leverage: number;
-    /** Sub-account info */
-    subAccounts: SubAccountSummary[];
-}
-/**
- * Summary for a single chain
- */
-export interface ChainSummary {
-    chainId: string;
-    totalDepositsUSD: number;
-    totalDebtUSD: number;
-    netWorth: number;
-    lenderCount: number;
-}
-/**
- * Lightweight totals-only summary (no per-lender breakdown or positions)
- */
-export interface PortfolioTotals {
-    balanceData: SummaryBalanceData;
-    aprData: SummaryAprData;
-    leverage: number;
-    activeLenders: number;
-    activeChains: number;
-}
-/**
- * Overall portfolio summary across all lenders and chains
- */
-export interface PortfolioSummary extends PortfolioTotals {
-    /** Per-lender summaries (array, sorted by netWorth descending) */
-    lenders: LenderSummary[];
-    /** Per-chain totals */
-    chains: ChainSummary[];
-}
-/**
- * Fused lender entry: UserData positions + aggregated LenderSummary metrics.
- * Used in the API response to avoid separate data + summary lookups.
- */
-export interface LenderDataEntry extends Omit<LenderSummary, 'subAccounts'> {
-    account: string;
-    lenderInfo?: LenderInfo;
-    data: UserDataForSubAccount[];
-}
-/**
- * Input type for buildSummaries - user data result from convertLenderUserDataResult
- */
-export type UserDataResult = {
-    [chainId: string]: {
-        [lender: string]: UserData;
-    };
-};
-//# sourceMappingURL=types.d.ts.map

package/dist/lending/user-data/summary/types.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"types.d.ts","sourceRoot":"","sources":["../../../../src/lending/user-data/summary/types.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,OAAO,EAAE,WAAW,EAAE,UAAU,EAAE,MAAM,yBAAyB,CAAA;AAC1E,OAAO,EAAE,UAAU,EAAE,QAAQ,EAAE,qBAAqB,EAAE,MAAM,gBAAgB,CAAA;AAE5E;;;;GAIG;AACH,MAAM,WAAW,kBAAkB;IACjC,QAAQ,EAAE,MAAM,CAAA;IAChB,IAAI,EAAE,MAAM,CAAA;IACZ,UAAU,EAAE,MAAM,CAAA;IAClB,mBAAmB,EAAE,MAAM,CAAA;IAC3B,GAAG,EAAE,MAAM,CAAA;IACX,WAAW,EAAE,MAAM,CAAA;IACnB,OAAO,EAAE,MAAM,CAAA;IACf,MAAM,EAAE,MAAM,CAAA;IACd,OAAO,CAAC,EAAE,GAAG,CAAA;CACd;AAED;;GAEG;AACH,MAAM,WAAW,cAAc;IAC7B,GAAG,EAAE,MAAM,CAAA;IACX,UAAU,EAAE,MAAM,CAAA;IAClB,SAAS,EAAE,MAAM,CAAA;IACjB,SAAS,EAAE,MAAM,CAAA;IACjB,gBAAgB,EAAE,MAAM,CAAA;IACxB,eAAe,EAAE,MAAM,CAAA;IACvB,YAAY,EAAE,MAAM,CAAA;IACpB,mBAAmB,EAAE,MAAM,CAAA;IAC3B,kBAAkB,EAAE,MAAM,CAAA;IAC1B,OAAO,EAAE,GAAG,CAAA;CACb;AAED;;GAEG;AACH,MAAM,WAAW,iBAAiB;IAChC,SAAS,EAAE,MAAM,CAAA;IACjB,MAAM,EAAE,MAAM,GAAG,IAAI,CAAA;IACrB,WAAW,EAAE,WAAW,CAAA;IACxB,OAAO,EAAE,OAAO,CAAA;IAChB,UAAU,EAAE,UAAU,CAAA;IACtB,aAAa,EAAE,MAAM,CAAA;CACtB;AAED;;GAEG;AACH,MAAM,WAAW,aAAa;IAC5B,MAAM,EAAE,MAAM,CAAA;IACd,OAAO,EAAE,MAAM,CAAA;IACf,WAAW,EAAE,kBAAkB,CAAA;IAC/B,OAAO,EAAE,cAAc,CAAA;IACvB,oDAAoD;IACpD,QAAQ,EAAE,MAAM,CAAA;IAChB,uBAAuB;IACvB,WAAW,EAAE,iBAAiB,EAAE,CAAA;CACjC;AAED;;GAEG;AACH,MAAM,WAAW,YAAY;IAC3B,OAAO,EAAE,MAAM,CAAA;IACf,gBAAgB,EAAE,MAAM,CAAA;IACxB,YAAY,EAAE,MAAM,CAAA;IACpB,QAAQ,EAAE,MAAM,CAAA;IAChB,WAAW,EAAE,MAAM,CAAA;CACpB;AAED;;GAEG;AACH,MAAM,WAAW,eAAe;IAC9B,WAAW,EAAE,kBAAkB,CAAA;IAC/B,OAAO,EAAE,cAAc,CAAA;IACvB,QAAQ,EAAE,MAAM,CAAA;IAChB,aAAa,EAAE,MAAM,CAAA;IACrB,YAAY,EAAE,MAAM,CAAA;CACrB;AAED;;GAEG;AACH,MAAM,WAAW,gBAAiB,SAAQ,eAAe;IACvD,kEAAkE;IAClE,OAAO,EAAE,aAAa,EAAE,CAAA;IACxB,uBAAuB;IACvB,MAAM,EAAE,YAAY,EAAE,CAAA;CACvB;AAED;;;GAGG;AACH,MAAM,WAAW,eAAgB,SAAQ,IAAI,CAAC,aAAa,EAAE,aAAa,CAAC;IACzE,OAAO,EAAE,MAAM,CAAA;IACf,UAAU,CAAC,EAAE,UAAU,CAAA;IACvB,IAAI,EAAE,qBAAqB,EAAE,CAAA;CAC9B;AAED;;GAEG;AACH,MAAM,MAAM,cAAc,GAAG;IAC3B,CAAC,OAAO,EAAE,MAAM,GAAG;QACjB,CAAC,MAAM,EAAE,MAAM,GAAG,QAAQ,CAAA;KAC3B,CAAA;CACF,CAAA"}

package/dist/lending/user-data/summary/utils.d.ts

@@ -1,57 +0,0 @@
-import { AprData, BalanceData } from '../fetch-balances/types';
-/**
- * Calculates weighted average
- * @param items Array of { value: number, weight: number }
- * @returns Weighted average, or 0 if total weight is 0
- */
-export declare function calculateWeightedAverage(items: {
-    value: number;
-    weight: number;
-}[]): number;
-/**
- * Calculates net APR for a sub-account based on deposits and debt
- */
-export declare function calculateNetApr(aprData: AprData, balanceData: BalanceData): number;
-/**
- * Calculates leverage ratio
- * @returns leverage = deposits / netWorth, or 0 if netWorth <= 0
- */
-export declare function calculateLeverage(deposits: number, netWorth: number): number;
-/**
- * Calculates overall net APR from totals
- */
-export declare function calculateOverallNetApr(totalDepositsUSD: number, totalDebtUSD: number, avgDepositApr: number, avgBorrowApr: number): number;
-export interface AprWeightItem {
-    deposits: number;
-    debt: number;
-    nav: number;
-    apr: number;
-    depositApr: number;
-    borrowApr: number;
-    rewardApr: number;
-    rewardDepositApr: number;
-    rewardBorrowApr: number;
-    intrinsicApr: number;
-    intrinsicDepositApr: number;
-    intrinsicBorrowApr: number;
-}
-/**
- * Computes all weighted APR fields from a set of items.
- *
- * Weighting rules:
- * - Deposit-side APRs (depositApr, rewardDepositApr, intrinsicDepositApr) → weighted by deposits
- * - Borrow-side APRs (borrowApr, rewardBorrowApr, intrinsicBorrowApr) → weighted by debt
- * - Net APRs (apr, rewardApr, intrinsicApr) → weighted by nav
- */
-export declare function calculateWeightedAprs(items: AprWeightItem[]): {
-    apr: number;
-    depositApr: number;
-    borrowApr: number;
-    rewardApr: number;
-    rewardDepositApr: number;
-    rewardBorrowApr: number;
-    intrinsicApr: number;
-    intrinsicDepositApr: number;
-    intrinsicBorrowApr: number;
-};
-//# sourceMappingURL=utils.d.ts.map

package/dist/lending/user-data/summary/utils.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"utils.d.ts","sourceRoot":"","sources":["../../../../src/lending/user-data/summary/utils.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,OAAO,EAAE,WAAW,EAAE,MAAM,yBAAyB,CAAA;AAE9D;;;;GAIG;AACH,wBAAgB,wBAAwB,CACtC,KAAK,EAAE;IAAE,KAAK,EAAE,MAAM,CAAC;IAAC,MAAM,EAAE,MAAM,CAAA;CAAE,EAAE,GACzC,MAAM,CAQR;AAED;;GAEG;AACH,wBAAgB,eAAe,CAC7B,OAAO,EAAE,OAAO,EAChB,WAAW,EAAE,WAAW,GACvB,MAAM,CAgBR;AAED;;;GAGG;AACH,wBAAgB,iBAAiB,CAAC,QAAQ,EAAE,MAAM,EAAE,QAAQ,EAAE,MAAM,GAAG,MAAM,CAE5E;AAED;;GAEG;AACH,wBAAgB,sBAAsB,CACpC,gBAAgB,EAAE,MAAM,EACxB,YAAY,EAAE,MAAM,EACpB,aAAa,EAAE,MAAM,EACrB,YAAY,EAAE,MAAM,GACnB,MAAM,CASR;AAED,MAAM,WAAW,aAAa;IAC5B,QAAQ,EAAE,MAAM,CAAA;IAChB,IAAI,EAAE,MAAM,CAAA;IACZ,GAAG,EAAE,MAAM,CAAA;IACX,GAAG,EAAE,MAAM,CAAA;IACX,UAAU,EAAE,MAAM,CAAA;IAClB,SAAS,EAAE,MAAM,CAAA;IACjB,SAAS,EAAE,MAAM,CAAA;IACjB,gBAAgB,EAAE,MAAM,CAAA;IACxB,eAAe,EAAE,MAAM,CAAA;IACvB,YAAY,EAAE,MAAM,CAAA;IACpB,mBAAmB,EAAE,MAAM,CAAA;IAC3B,kBAAkB,EAAE,MAAM,CAAA;CAC3B;AAED;;;;;;;GAOG;AACH,wBAAgB,qBAAqB,CAAC,KAAK,EAAE,aAAa,EAAE;;;;;;;;;;EAmB3D"}

package/dist/lending/user-data/teller/index.d.ts

@@ -1,3 +0,0 @@
-export { buildTellerUserCall, getCachedTellerBids, TELLER_CALLS_PER_BID, type TellerDiscoveredBid, type TellerDiscovery, } from './userCallBuild';
-export { getTellerUserDataConverter } from './userCallParse';
-//# sourceMappingURL=index.d.ts.map

package/dist/lending/user-data/teller/index.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"index.d.ts","sourceRoot":"","sources":["../../../../src/lending/user-data/teller/index.ts"],"names":[],"mappings":"AAAA,OAAO,EACL,mBAAmB,EACnB,mBAAmB,EACnB,oBAAoB,EACpB,KAAK,mBAAmB,EACxB,KAAK,eAAe,GACrB,MAAM,iBAAiB,CAAA;AACxB,OAAO,EAAE,0BAA0B,EAAE,MAAM,iBAAiB,CAAA"}

package/dist/lending/user-data/teller/userCallBuild.d.ts

@@ -1,31 +0,0 @@
-import { TellerPoolConfig } from '@1delta/data-sdk';
-import { Call } from '../../../utils/multicall';
-/**
- * User-data call build for Teller. Borrower loans ("bids") are keyed by a
- * uint256 bidId and a user can hold MANY, so this is a DISCOVERY-first build
- * (async, same pattern as the Liquity family):
- *
- *  1. `TellerV2.getBorrowerActiveLoanIds(account)` → the active bidIds;
- *  2. `TellerV2.getLoanLender(bidId)` per id → attribute each bid to a curated
- *     pool (the pool is the lender-of-record after `acceptFundsForAcceptBid`);
- *  3. data phase per kept bid: `bids`, `calculateAmountOwed(now)`,
- *     `CollateralManager.getCollateralAmount`, `isLoanDefaulted`.
- *
- * The discovered layout is stashed in a short-lived module cache so the parser
- * (a separate phase fed only the multicall results) can slice it — same trick
- * as Liquity / the Lista broker caches.
- */
-export declare const TELLER_CALLS_PER_BID = 4;
-export interface TellerDiscoveredBid {
-    /** decimal uint256 bidId */
-    bidId: string;
-    /** the curated pool this bid was funded by */
-    pool: TellerPoolConfig;
-}
-export interface TellerDiscovery {
-    bids: TellerDiscoveredBid[];
-    at: number;
-}
-export declare const getCachedTellerBids: (chainId: string, account: string) => TellerDiscovery | undefined;
-export declare const buildTellerUserCall: (chainId: string, _lender: string, account: string) => Promise<Call[]>;
-//# sourceMappingURL=userCallBuild.d.ts.map

package/dist/lending/user-data/teller/userCallBuild.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"userCallBuild.d.ts","sourceRoot":"","sources":["../../../../src/lending/user-data/teller/userCallBuild.ts"],"names":[],"mappings":"AAAA,OAAO,EAGL,gBAAgB,EACjB,MAAM,kBAAkB,CAAA;AAGzB,OAAO,EAAE,IAAI,EAAE,MAAM,0BAA0B,CAAA;AAE/C;;;;;;;;;;;;;;GAcG;AACH,eAAO,MAAM,oBAAoB,IAAI,CAAA;AAGrC,MAAM,WAAW,mBAAmB;IAClC,4BAA4B;IAC5B,KAAK,EAAE,MAAM,CAAA;IACb,8CAA8C;IAC9C,IAAI,EAAE,gBAAgB,CAAA;CACvB;AAED,MAAM,WAAW,eAAe;IAC9B,IAAI,EAAE,mBAAmB,EAAE,CAAA;IAC3B,EAAE,EAAE,MAAM,CAAA;CACX;AAMD,eAAO,MAAM,mBAAmB,GAC9B,SAAS,MAAM,EACf,SAAS,MAAM,KACd,eAAe,GAAG,SAIpB,CAAA;AAeD,eAAO,MAAM,mBAAmB,GAC9B,SAAS,MAAM,EACf,SAAS,MAAM,EACf,SAAS,MAAM,KACd,OAAO,CAAC,IAAI,EAAE,CAoFhB,CAAA"}

package/dist/lending/user-data/teller/userCallParse.d.ts

@@ -1,22 +0,0 @@
-import { LenderToLenderCrossPoolMeta, UserData } from '../utils/types';
-/**
- * Returns a [converter, expectedCallCount] tuple for Teller user data.
- *
- * Layout mirrors `buildTellerUserCall`: for each discovered bid (in cache
- * order) four results — `bids`, `calculateAmountOwed`, `getCollateralAmount`,
- * `isLoanDefaulted`. Bids are ISOLATED (each is its own collateral + fixed debt)
- * and a user holds many per pool, so each bidId becomes its OWN sub-account
- * under the pool key `TELLER_<POOL_ADDR>` (River-style rows, but keyed by bidId
- * instead of `'0'`):
- *
- *  - collateral row: deposits = the bid's escrowed collateral;
- *  - loan row: `debtStable` = `calculateAmountOwed` (principal + interest) — a
- *    fixed-term debt goes on the stable slot (Exactly/Lista convention). The
- *    `term` detail (`ListaTermLoan`) carries `loanId = bidId` (the exact
- *    `repayLoanFull` target), the fixed APR, and the maturity
- *    (`acceptedTimestamp + loanDuration`).
- */
-export declare const getTellerUserDataConverter: (_lender: string, chainId: string, account: string, meta?: LenderToLenderCrossPoolMeta) => [(data: any[]) => {
-    [lender: string]: UserData;
-} | undefined, number];
-//# sourceMappingURL=userCallParse.d.ts.map

package/dist/lending/user-data/teller/userCallParse.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"userCallParse.d.ts","sourceRoot":"","sources":["../../../../src/lending/user-data/teller/userCallParse.ts"],"names":[],"mappings":"AAKA,OAAO,EAEL,2BAA2B,EAC3B,QAAQ,EACT,MAAM,gBAAgB,CAAA;AAkBvB;;;;;;;;;;;;;;;;GAgBG;AACH,eAAO,MAAM,0BAA0B,GACrC,SAAS,MAAM,EACf,SAAS,MAAM,EACf,SAAS,MAAM,EACf,OAAO,2BAA2B,KACjC,CAAC,CAAC,IAAI,EAAE,GAAG,EAAE,KAAK;IAAE,CAAC,MAAM,EAAE,MAAM,GAAG,QAAQ,CAAA;CAAE,GAAG,SAAS,EAAE,MAAM,CAoKtE,CAAA"}

package/dist/lending/user-data/term/userCall.test.d.ts

@@ -1,2 +0,0 @@
-export {};
-//# sourceMappingURL=userCall.test.d.ts.map

package/dist/lending/user-data/term/userCall.test.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"userCall.test.d.ts","sourceRoot":"","sources":["../../../../src/lending/user-data/term/userCall.test.ts"],"names":[],"mappings":""}