zstdlib 0.9.0-x64-mingw-ucrt

data/ext/zstdlib_c/zstd-1.5.2/lib/compress/zstd_compress_superblock.c

@@ -0,0 +1,573 @@
+/*
+ * Copyright (c) Yann Collet, Facebook, Inc.
+ * All rights reserved.
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+ */
+
+ /*-*************************************
+ *  Dependencies
+ ***************************************/
+#include "zstd_compress_superblock.h"
+
+#include "../common/zstd_internal.h"  /* ZSTD_getSequenceLength */
+#include "hist.h"                     /* HIST_countFast_wksp */
+#include "zstd_compress_internal.h"   /* ZSTD_[huf|fse|entropy]CTablesMetadata_t */
+#include "zstd_compress_sequences.h"
+#include "zstd_compress_literals.h"
+
+/** ZSTD_compressSubBlock_literal() :
+ *  Compresses literals section for a sub-block.
+ *  When we have to write the Huffman table we will sometimes choose a header
+ *  size larger than necessary. This is because we have to pick the header size
+ *  before we know the table size + compressed size, so we have a bound on the
+ *  table size. If we guessed incorrectly, we fall back to uncompressed literals.
+ *
+ *  We write the header when writeEntropy=1 and set entropyWritten=1 when we succeeded
+ *  in writing the header, otherwise it is set to 0.
+ *
+ *  hufMetadata->hType has literals block type info.
+ *      If it is set_basic, all sub-blocks literals section will be Raw_Literals_Block.
+ *      If it is set_rle, all sub-blocks literals section will be RLE_Literals_Block.
+ *      If it is set_compressed, first sub-block's literals section will be Compressed_Literals_Block
+ *      If it is set_compressed, first sub-block's literals section will be Treeless_Literals_Block
+ *      and the following sub-blocks' literals sections will be Treeless_Literals_Block.
+ *  @return : compressed size of literals section of a sub-block
+ *            Or 0 if it unable to compress.
+ *            Or error code */
+static size_t ZSTD_compressSubBlock_literal(const HUF_CElt* hufTable,
+                                    const ZSTD_hufCTablesMetadata_t* hufMetadata,
+                                    const BYTE* literals, size_t litSize,
+                                    void* dst, size_t dstSize,
+                                    const int bmi2, int writeEntropy, int* entropyWritten)
+{
+    size_t const header = writeEntropy ? 200 : 0;
+    size_t const lhSize = 3 + (litSize >= (1 KB - header)) + (litSize >= (16 KB - header));
+    BYTE* const ostart = (BYTE*)dst;
+    BYTE* const oend = ostart + dstSize;
+    BYTE* op = ostart + lhSize;
+    U32 const singleStream = lhSize == 3;
+    symbolEncodingType_e hType = writeEntropy ? hufMetadata->hType : set_repeat;
+    size_t cLitSize = 0;
+
+    (void)bmi2; /* TODO bmi2... */
+
+    DEBUGLOG(5, "ZSTD_compressSubBlock_literal (litSize=%zu, lhSize=%zu, writeEntropy=%d)", litSize, lhSize, writeEntropy);
+
+    *entropyWritten = 0;
+    if (litSize == 0 || hufMetadata->hType == set_basic) {
+      DEBUGLOG(5, "ZSTD_compressSubBlock_literal using raw literal");
+      return ZSTD_noCompressLiterals(dst, dstSize, literals, litSize);
+    } else if (hufMetadata->hType == set_rle) {
+      DEBUGLOG(5, "ZSTD_compressSubBlock_literal using rle literal");
+      return ZSTD_compressRleLiteralsBlock(dst, dstSize, literals, litSize);
+    }
+
+    assert(litSize > 0);
+    assert(hufMetadata->hType == set_compressed || hufMetadata->hType == set_repeat);
+
+    if (writeEntropy && hufMetadata->hType == set_compressed) {
+        ZSTD_memcpy(op, hufMetadata->hufDesBuffer, hufMetadata->hufDesSize);
+        op += hufMetadata->hufDesSize;
+        cLitSize += hufMetadata->hufDesSize;
+        DEBUGLOG(5, "ZSTD_compressSubBlock_literal (hSize=%zu)", hufMetadata->hufDesSize);
+    }
+
+    /* TODO bmi2 */
+    {   const size_t cSize = singleStream ? HUF_compress1X_usingCTable(op, oend-op, literals, litSize, hufTable)
+                                          : HUF_compress4X_usingCTable(op, oend-op, literals, litSize, hufTable);
+        op += cSize;
+        cLitSize += cSize;
+        if (cSize == 0 || ERR_isError(cSize)) {
+            DEBUGLOG(5, "Failed to write entropy tables %s", ZSTD_getErrorName(cSize));
+            return 0;
+        }
+        /* If we expand and we aren't writing a header then emit uncompressed */
+        if (!writeEntropy && cLitSize >= litSize) {
+            DEBUGLOG(5, "ZSTD_compressSubBlock_literal using raw literal because uncompressible");
+            return ZSTD_noCompressLiterals(dst, dstSize, literals, litSize);
+        }
+        /* If we are writing headers then allow expansion that doesn't change our header size. */
+        if (lhSize < (size_t)(3 + (cLitSize >= 1 KB) + (cLitSize >= 16 KB))) {
+            assert(cLitSize > litSize);
+            DEBUGLOG(5, "Literals expanded beyond allowed header size");
+            return ZSTD_noCompressLiterals(dst, dstSize, literals, litSize);
+        }
+        DEBUGLOG(5, "ZSTD_compressSubBlock_literal (cSize=%zu)", cSize);
+    }
+
+    /* Build header */
+    switch(lhSize)
+    {
+    case 3: /* 2 - 2 - 10 - 10 */
+        {   U32 const lhc = hType + ((!singleStream) << 2) + ((U32)litSize<<4) + ((U32)cLitSize<<14);
+            MEM_writeLE24(ostart, lhc);
+            break;
+        }
+    case 4: /* 2 - 2 - 14 - 14 */
+        {   U32 const lhc = hType + (2 << 2) + ((U32)litSize<<4) + ((U32)cLitSize<<18);
+            MEM_writeLE32(ostart, lhc);
+            break;
+        }
+    case 5: /* 2 - 2 - 18 - 18 */
+        {   U32 const lhc = hType + (3 << 2) + ((U32)litSize<<4) + ((U32)cLitSize<<22);
+            MEM_writeLE32(ostart, lhc);
+            ostart[4] = (BYTE)(cLitSize >> 10);
+            break;
+        }
+    default:  /* not possible : lhSize is {3,4,5} */
+        assert(0);
+    }
+    *entropyWritten = 1;
+    DEBUGLOG(5, "Compressed literals: %u -> %u", (U32)litSize, (U32)(op-ostart));
+    return op-ostart;
+}
+
+static size_t ZSTD_seqDecompressedSize(seqStore_t const* seqStore, const seqDef* sequences, size_t nbSeq, size_t litSize, int lastSequence) {
+    const seqDef* const sstart = sequences;
+    const seqDef* const send = sequences + nbSeq;
+    const seqDef* sp = sstart;
+    size_t matchLengthSum = 0;
+    size_t litLengthSum = 0;
+    (void)(litLengthSum); /* suppress unused variable warning on some environments */
+    while (send-sp > 0) {
+        ZSTD_sequenceLength const seqLen = ZSTD_getSequenceLength(seqStore, sp);
+        litLengthSum += seqLen.litLength;
+        matchLengthSum += seqLen.matchLength;
+        sp++;
+    }
+    assert(litLengthSum <= litSize);
+    if (!lastSequence) {
+        assert(litLengthSum == litSize);
+    }
+    return matchLengthSum + litSize;
+}
+
+/** ZSTD_compressSubBlock_sequences() :
+ *  Compresses sequences section for a sub-block.
+ *  fseMetadata->llType, fseMetadata->ofType, and fseMetadata->mlType have
+ *  symbol compression modes for the super-block.
+ *  The first successfully compressed block will have these in its header.
+ *  We set entropyWritten=1 when we succeed in compressing the sequences.
+ *  The following sub-blocks will always have repeat mode.
+ *  @return : compressed size of sequences section of a sub-block
+ *            Or 0 if it is unable to compress
+ *            Or error code. */
+static size_t ZSTD_compressSubBlock_sequences(const ZSTD_fseCTables_t* fseTables,
+                                              const ZSTD_fseCTablesMetadata_t* fseMetadata,
+                                              const seqDef* sequences, size_t nbSeq,
+                                              const BYTE* llCode, const BYTE* mlCode, const BYTE* ofCode,
+                                              const ZSTD_CCtx_params* cctxParams,
+                                              void* dst, size_t dstCapacity,
+                                              const int bmi2, int writeEntropy, int* entropyWritten)
+{
+    const int longOffsets = cctxParams->cParams.windowLog > STREAM_ACCUMULATOR_MIN;
+    BYTE* const ostart = (BYTE*)dst;
+    BYTE* const oend = ostart + dstCapacity;
+    BYTE* op = ostart;
+    BYTE* seqHead;
+
+    DEBUGLOG(5, "ZSTD_compressSubBlock_sequences (nbSeq=%zu, writeEntropy=%d, longOffsets=%d)", nbSeq, writeEntropy, longOffsets);
+
+    *entropyWritten = 0;
+    /* Sequences Header */
+    RETURN_ERROR_IF((oend-op) < 3 /*max nbSeq Size*/ + 1 /*seqHead*/,
+                    dstSize_tooSmall, "");
+    if (nbSeq < 0x7F)
+        *op++ = (BYTE)nbSeq;
+    else if (nbSeq < LONGNBSEQ)
+        op[0] = (BYTE)((nbSeq>>8) + 0x80), op[1] = (BYTE)nbSeq, op+=2;
+    else
+        op[0]=0xFF, MEM_writeLE16(op+1, (U16)(nbSeq - LONGNBSEQ)), op+=3;
+    if (nbSeq==0) {
+        return op - ostart;
+    }
+
+    /* seqHead : flags for FSE encoding type */
+    seqHead = op++;
+
+    DEBUGLOG(5, "ZSTD_compressSubBlock_sequences (seqHeadSize=%u)", (unsigned)(op-ostart));
+
+    if (writeEntropy) {
+        const U32 LLtype = fseMetadata->llType;
+        const U32 Offtype = fseMetadata->ofType;
+        const U32 MLtype = fseMetadata->mlType;
+        DEBUGLOG(5, "ZSTD_compressSubBlock_sequences (fseTablesSize=%zu)", fseMetadata->fseTablesSize);
+        *seqHead = (BYTE)((LLtype<<6) + (Offtype<<4) + (MLtype<<2));
+        ZSTD_memcpy(op, fseMetadata->fseTablesBuffer, fseMetadata->fseTablesSize);
+        op += fseMetadata->fseTablesSize;
+    } else {
+        const U32 repeat = set_repeat;
+        *seqHead = (BYTE)((repeat<<6) + (repeat<<4) + (repeat<<2));
+    }
+
+    {   size_t const bitstreamSize = ZSTD_encodeSequences(
+                                        op, oend - op,
+                                        fseTables->matchlengthCTable, mlCode,
+                                        fseTables->offcodeCTable, ofCode,
+                                        fseTables->litlengthCTable, llCode,
+                                        sequences, nbSeq,
+                                        longOffsets, bmi2);
+        FORWARD_IF_ERROR(bitstreamSize, "ZSTD_encodeSequences failed");
+        op += bitstreamSize;
+        /* zstd versions <= 1.3.4 mistakenly report corruption when
+         * FSE_readNCount() receives a buffer < 4 bytes.
+         * Fixed by https://github.com/facebook/zstd/pull/1146.
+         * This can happen when the last set_compressed table present is 2
+         * bytes and the bitstream is only one byte.
+         * In this exceedingly rare case, we will simply emit an uncompressed
+         * block, since it isn't worth optimizing.
+         */
+#ifndef FUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION
+        if (writeEntropy && fseMetadata->lastCountSize && fseMetadata->lastCountSize + bitstreamSize < 4) {
+            /* NCountSize >= 2 && bitstreamSize > 0 ==> lastCountSize == 3 */
+            assert(fseMetadata->lastCountSize + bitstreamSize == 3);
+            DEBUGLOG(5, "Avoiding bug in zstd decoder in versions <= 1.3.4 by "
+                        "emitting an uncompressed block.");
+            return 0;
+        }
+#endif
+        DEBUGLOG(5, "ZSTD_compressSubBlock_sequences (bitstreamSize=%zu)", bitstreamSize);
+    }
+
+    /* zstd versions <= 1.4.0 mistakenly report error when
+     * sequences section body size is less than 3 bytes.
+     * Fixed by https://github.com/facebook/zstd/pull/1664.
+     * This can happen when the previous sequences section block is compressed
+     * with rle mode and the current block's sequences section is compressed
+     * with repeat mode where sequences section body size can be 1 byte.
+     */
+#ifndef FUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION
+    if (op-seqHead < 4) {
+        DEBUGLOG(5, "Avoiding bug in zstd decoder in versions <= 1.4.0 by emitting "
+                    "an uncompressed block when sequences are < 4 bytes");
+        return 0;
+    }
+#endif
+
+    *entropyWritten = 1;
+    return op - ostart;
+}
+
+/** ZSTD_compressSubBlock() :
+ *  Compresses a single sub-block.
+ *  @return : compressed size of the sub-block
+ *            Or 0 if it failed to compress. */
+static size_t ZSTD_compressSubBlock(const ZSTD_entropyCTables_t* entropy,
+                                    const ZSTD_entropyCTablesMetadata_t* entropyMetadata,
+                                    const seqDef* sequences, size_t nbSeq,
+                                    const BYTE* literals, size_t litSize,
+                                    const BYTE* llCode, const BYTE* mlCode, const BYTE* ofCode,
+                                    const ZSTD_CCtx_params* cctxParams,
+                                    void* dst, size_t dstCapacity,
+                                    const int bmi2,
+                                    int writeLitEntropy, int writeSeqEntropy,
+                                    int* litEntropyWritten, int* seqEntropyWritten,
+                                    U32 lastBlock)
+{
+    BYTE* const ostart = (BYTE*)dst;
+    BYTE* const oend = ostart + dstCapacity;
+    BYTE* op = ostart + ZSTD_blockHeaderSize;
+    DEBUGLOG(5, "ZSTD_compressSubBlock (litSize=%zu, nbSeq=%zu, writeLitEntropy=%d, writeSeqEntropy=%d, lastBlock=%d)",
+                litSize, nbSeq, writeLitEntropy, writeSeqEntropy, lastBlock);
+    {   size_t cLitSize = ZSTD_compressSubBlock_literal((const HUF_CElt*)entropy->huf.CTable,
+                                                        &entropyMetadata->hufMetadata, literals, litSize,
+                                                        op, oend-op, bmi2, writeLitEntropy, litEntropyWritten);
+        FORWARD_IF_ERROR(cLitSize, "ZSTD_compressSubBlock_literal failed");
+        if (cLitSize == 0) return 0;
+        op += cLitSize;
+    }
+    {   size_t cSeqSize = ZSTD_compressSubBlock_sequences(&entropy->fse,
+                                                  &entropyMetadata->fseMetadata,
+                                                  sequences, nbSeq,
+                                                  llCode, mlCode, ofCode,
+                                                  cctxParams,
+                                                  op, oend-op,
+                                                  bmi2, writeSeqEntropy, seqEntropyWritten);
+        FORWARD_IF_ERROR(cSeqSize, "ZSTD_compressSubBlock_sequences failed");
+        if (cSeqSize == 0) return 0;
+        op += cSeqSize;
+    }
+    /* Write block header */
+    {   size_t cSize = (op-ostart)-ZSTD_blockHeaderSize;
+        U32 const cBlockHeader24 = lastBlock + (((U32)bt_compressed)<<1) + (U32)(cSize << 3);
+        MEM_writeLE24(ostart, cBlockHeader24);
+    }
+    return op-ostart;
+}
+
+static size_t ZSTD_estimateSubBlockSize_literal(const BYTE* literals, size_t litSize,
+                                                const ZSTD_hufCTables_t* huf,
+                                                const ZSTD_hufCTablesMetadata_t* hufMetadata,
+                                                void* workspace, size_t wkspSize,
+                                                int writeEntropy)
+{
+    unsigned* const countWksp = (unsigned*)workspace;
+    unsigned maxSymbolValue = 255;
+    size_t literalSectionHeaderSize = 3; /* Use hard coded size of 3 bytes */
+
+    if (hufMetadata->hType == set_basic) return litSize;
+    else if (hufMetadata->hType == set_rle) return 1;
+    else if (hufMetadata->hType == set_compressed || hufMetadata->hType == set_repeat) {
+        size_t const largest = HIST_count_wksp (countWksp, &maxSymbolValue, (const BYTE*)literals, litSize, workspace, wkspSize);
+        if (ZSTD_isError(largest)) return litSize;
+        {   size_t cLitSizeEstimate = HUF_estimateCompressedSize((const HUF_CElt*)huf->CTable, countWksp, maxSymbolValue);
+            if (writeEntropy) cLitSizeEstimate += hufMetadata->hufDesSize;
+            return cLitSizeEstimate + literalSectionHeaderSize;
+    }   }
+    assert(0); /* impossible */
+    return 0;
+}
+
+static size_t ZSTD_estimateSubBlockSize_symbolType(symbolEncodingType_e type,
+                        const BYTE* codeTable, unsigned maxCode,
+                        size_t nbSeq, const FSE_CTable* fseCTable,
+                        const U8* additionalBits,
+                        short const* defaultNorm, U32 defaultNormLog, U32 defaultMax,
+                        void* workspace, size_t wkspSize)
+{
+    unsigned* const countWksp = (unsigned*)workspace;
+    const BYTE* ctp = codeTable;
+    const BYTE* const ctStart = ctp;
+    const BYTE* const ctEnd = ctStart + nbSeq;
+    size_t cSymbolTypeSizeEstimateInBits = 0;
+    unsigned max = maxCode;
+
+    HIST_countFast_wksp(countWksp, &max, codeTable, nbSeq, workspace, wkspSize);  /* can't fail */
+    if (type == set_basic) {
+        /* We selected this encoding type, so it must be valid. */
+        assert(max <= defaultMax);
+        cSymbolTypeSizeEstimateInBits = max <= defaultMax
+                ? ZSTD_crossEntropyCost(defaultNorm, defaultNormLog, countWksp, max)
+                : ERROR(GENERIC);
+    } else if (type == set_rle) {
+        cSymbolTypeSizeEstimateInBits = 0;
+    } else if (type == set_compressed || type == set_repeat) {
+        cSymbolTypeSizeEstimateInBits = ZSTD_fseBitCost(fseCTable, countWksp, max);
+    }
+    if (ZSTD_isError(cSymbolTypeSizeEstimateInBits)) return nbSeq * 10;
+    while (ctp < ctEnd) {
+        if (additionalBits) cSymbolTypeSizeEstimateInBits += additionalBits[*ctp];
+        else cSymbolTypeSizeEstimateInBits += *ctp; /* for offset, offset code is also the number of additional bits */
+        ctp++;
+    }
+    return cSymbolTypeSizeEstimateInBits / 8;
+}
+
+static size_t ZSTD_estimateSubBlockSize_sequences(const BYTE* ofCodeTable,
+                                                  const BYTE* llCodeTable,
+                                                  const BYTE* mlCodeTable,
+                                                  size_t nbSeq,
+                                                  const ZSTD_fseCTables_t* fseTables,
+                                                  const ZSTD_fseCTablesMetadata_t* fseMetadata,
+                                                  void* workspace, size_t wkspSize,
+                                                  int writeEntropy)
+{
+    size_t const sequencesSectionHeaderSize = 3; /* Use hard coded size of 3 bytes */
+    size_t cSeqSizeEstimate = 0;
+    if (nbSeq == 0) return sequencesSectionHeaderSize;
+    cSeqSizeEstimate += ZSTD_estimateSubBlockSize_symbolType(fseMetadata->ofType, ofCodeTable, MaxOff,
+                                         nbSeq, fseTables->offcodeCTable, NULL,
+                                         OF_defaultNorm, OF_defaultNormLog, DefaultMaxOff,
+                                         workspace, wkspSize);
+    cSeqSizeEstimate += ZSTD_estimateSubBlockSize_symbolType(fseMetadata->llType, llCodeTable, MaxLL,
+                                         nbSeq, fseTables->litlengthCTable, LL_bits,
+                                         LL_defaultNorm, LL_defaultNormLog, MaxLL,
+                                         workspace, wkspSize);
+    cSeqSizeEstimate += ZSTD_estimateSubBlockSize_symbolType(fseMetadata->mlType, mlCodeTable, MaxML,
+                                         nbSeq, fseTables->matchlengthCTable, ML_bits,
+                                         ML_defaultNorm, ML_defaultNormLog, MaxML,
+                                         workspace, wkspSize);
+    if (writeEntropy) cSeqSizeEstimate += fseMetadata->fseTablesSize;
+    return cSeqSizeEstimate + sequencesSectionHeaderSize;
+}
+
+static size_t ZSTD_estimateSubBlockSize(const BYTE* literals, size_t litSize,
+                                        const BYTE* ofCodeTable,
+                                        const BYTE* llCodeTable,
+                                        const BYTE* mlCodeTable,
+                                        size_t nbSeq,
+                                        const ZSTD_entropyCTables_t* entropy,
+                                        const ZSTD_entropyCTablesMetadata_t* entropyMetadata,
+                                        void* workspace, size_t wkspSize,
+                                        int writeLitEntropy, int writeSeqEntropy) {
+    size_t cSizeEstimate = 0;
+    cSizeEstimate += ZSTD_estimateSubBlockSize_literal(literals, litSize,
+                                                         &entropy->huf, &entropyMetadata->hufMetadata,
+                                                         workspace, wkspSize, writeLitEntropy);
+    cSizeEstimate += ZSTD_estimateSubBlockSize_sequences(ofCodeTable, llCodeTable, mlCodeTable,
+                                                         nbSeq, &entropy->fse, &entropyMetadata->fseMetadata,
+                                                         workspace, wkspSize, writeSeqEntropy);
+    return cSizeEstimate + ZSTD_blockHeaderSize;
+}
+
+static int ZSTD_needSequenceEntropyTables(ZSTD_fseCTablesMetadata_t const* fseMetadata)
+{
+    if (fseMetadata->llType == set_compressed || fseMetadata->llType == set_rle)
+        return 1;
+    if (fseMetadata->mlType == set_compressed || fseMetadata->mlType == set_rle)
+        return 1;
+    if (fseMetadata->ofType == set_compressed || fseMetadata->ofType == set_rle)
+        return 1;
+    return 0;
+}
+
+/** ZSTD_compressSubBlock_multi() :
+ *  Breaks super-block into multiple sub-blocks and compresses them.
+ *  Entropy will be written to the first block.
+ *  The following blocks will use repeat mode to compress.
+ *  All sub-blocks are compressed blocks (no raw or rle blocks).
+ *  @return : compressed size of the super block (which is multiple ZSTD blocks)
+ *            Or 0 if it failed to compress. */
+static size_t ZSTD_compressSubBlock_multi(const seqStore_t* seqStorePtr,
+                            const ZSTD_compressedBlockState_t* prevCBlock,
+                            ZSTD_compressedBlockState_t* nextCBlock,
+                            const ZSTD_entropyCTablesMetadata_t* entropyMetadata,
+                            const ZSTD_CCtx_params* cctxParams,
+                                  void* dst, size_t dstCapacity,
+                            const void* src, size_t srcSize,
+                            const int bmi2, U32 lastBlock,
+                            void* workspace, size_t wkspSize)
+{
+    const seqDef* const sstart = seqStorePtr->sequencesStart;
+    const seqDef* const send = seqStorePtr->sequences;
+    const seqDef* sp = sstart;
+    const BYTE* const lstart = seqStorePtr->litStart;
+    const BYTE* const lend = seqStorePtr->lit;
+    const BYTE* lp = lstart;
+    BYTE const* ip = (BYTE const*)src;
+    BYTE const* const iend = ip + srcSize;
+    BYTE* const ostart = (BYTE*)dst;
+    BYTE* const oend = ostart + dstCapacity;
+    BYTE* op = ostart;
+    const BYTE* llCodePtr = seqStorePtr->llCode;
+    const BYTE* mlCodePtr = seqStorePtr->mlCode;
+    const BYTE* ofCodePtr = seqStorePtr->ofCode;
+    size_t targetCBlockSize = cctxParams->targetCBlockSize;
+    size_t litSize, seqCount;
+    int writeLitEntropy = entropyMetadata->hufMetadata.hType == set_compressed;
+    int writeSeqEntropy = 1;
+    int lastSequence = 0;
+
+    DEBUGLOG(5, "ZSTD_compressSubBlock_multi (litSize=%u, nbSeq=%u)",
+                (unsigned)(lend-lp), (unsigned)(send-sstart));
+
+    litSize = 0;
+    seqCount = 0;
+    do {
+        size_t cBlockSizeEstimate = 0;
+        if (sstart == send) {
+            lastSequence = 1;
+        } else {
+            const seqDef* const sequence = sp + seqCount;
+            lastSequence = sequence == send - 1;
+            litSize += ZSTD_getSequenceLength(seqStorePtr, sequence).litLength;
+            seqCount++;
+        }
+        if (lastSequence) {
+            assert(lp <= lend);
+            assert(litSize <= (size_t)(lend - lp));
+            litSize = (size_t)(lend - lp);
+        }
+        /* I think there is an optimization opportunity here.
+         * Calling ZSTD_estimateSubBlockSize for every sequence can be wasteful
+         * since it recalculates estimate from scratch.
+         * For example, it would recount literal distribution and symbol codes every time.
+         */
+        cBlockSizeEstimate = ZSTD_estimateSubBlockSize(lp, litSize, ofCodePtr, llCodePtr, mlCodePtr, seqCount,
+                                                       &nextCBlock->entropy, entropyMetadata,
+                                                       workspace, wkspSize, writeLitEntropy, writeSeqEntropy);
+        if (cBlockSizeEstimate > targetCBlockSize || lastSequence) {
+            int litEntropyWritten = 0;
+            int seqEntropyWritten = 0;
+            const size_t decompressedSize = ZSTD_seqDecompressedSize(seqStorePtr, sp, seqCount, litSize, lastSequence);
+            const size_t cSize = ZSTD_compressSubBlock(&nextCBlock->entropy, entropyMetadata,
+                                                       sp, seqCount,
+                                                       lp, litSize,
+                                                       llCodePtr, mlCodePtr, ofCodePtr,
+                                                       cctxParams,
+                                                       op, oend-op,
+                                                       bmi2, writeLitEntropy, writeSeqEntropy,
+                                                       &litEntropyWritten, &seqEntropyWritten,
+                                                       lastBlock && lastSequence);
+            FORWARD_IF_ERROR(cSize, "ZSTD_compressSubBlock failed");
+            if (cSize > 0 && cSize < decompressedSize) {
+                DEBUGLOG(5, "Committed the sub-block");
+                assert(ip + decompressedSize <= iend);
+                ip += decompressedSize;
+                sp += seqCount;
+                lp += litSize;
+                op += cSize;
+                llCodePtr += seqCount;
+                mlCodePtr += seqCount;
+                ofCodePtr += seqCount;
+                litSize = 0;
+                seqCount = 0;
+                /* Entropy only needs to be written once */
+                if (litEntropyWritten) {
+                    writeLitEntropy = 0;
+                }
+                if (seqEntropyWritten) {
+                    writeSeqEntropy = 0;
+                }
+            }
+        }
+    } while (!lastSequence);
+    if (writeLitEntropy) {
+        DEBUGLOG(5, "ZSTD_compressSubBlock_multi has literal entropy tables unwritten");
+        ZSTD_memcpy(&nextCBlock->entropy.huf, &prevCBlock->entropy.huf, sizeof(prevCBlock->entropy.huf));
+    }
+    if (writeSeqEntropy && ZSTD_needSequenceEntropyTables(&entropyMetadata->fseMetadata)) {
+        /* If we haven't written our entropy tables, then we've violated our contract and
+         * must emit an uncompressed block.
+         */
+        DEBUGLOG(5, "ZSTD_compressSubBlock_multi has sequence entropy tables unwritten");
+        return 0;
+    }
+    if (ip < iend) {
+        size_t const cSize = ZSTD_noCompressBlock(op, oend - op, ip, iend - ip, lastBlock);
+        DEBUGLOG(5, "ZSTD_compressSubBlock_multi last sub-block uncompressed, %zu bytes", (size_t)(iend - ip));
+        FORWARD_IF_ERROR(cSize, "ZSTD_noCompressBlock failed");
+        assert(cSize != 0);
+        op += cSize;
+        /* We have to regenerate the repcodes because we've skipped some sequences */
+        if (sp < send) {
+            seqDef const* seq;
+            repcodes_t rep;
+            ZSTD_memcpy(&rep, prevCBlock->rep, sizeof(rep));
+            for (seq = sstart; seq < sp; ++seq) {
+                ZSTD_updateRep(rep.rep, seq->offBase - 1, ZSTD_getSequenceLength(seqStorePtr, seq).litLength == 0);
+            }
+            ZSTD_memcpy(nextCBlock->rep, &rep, sizeof(rep));
+        }
+    }
+    DEBUGLOG(5, "ZSTD_compressSubBlock_multi compressed");
+    return op-ostart;
+}
+
+size_t ZSTD_compressSuperBlock(ZSTD_CCtx* zc,
+                               void* dst, size_t dstCapacity,
+                               void const* src, size_t srcSize,
+                               unsigned lastBlock) {
+    ZSTD_entropyCTablesMetadata_t entropyMetadata;
+
+    FORWARD_IF_ERROR(ZSTD_buildBlockEntropyStats(&zc->seqStore,
+          &zc->blockState.prevCBlock->entropy,
+          &zc->blockState.nextCBlock->entropy,
+          &zc->appliedParams,
+          &entropyMetadata,
+          zc->entropyWorkspace, ENTROPY_WORKSPACE_SIZE /* statically allocated in resetCCtx */), "");
+
+    return ZSTD_compressSubBlock_multi(&zc->seqStore,
+            zc->blockState.prevCBlock,
+            zc->blockState.nextCBlock,
+            &entropyMetadata,
+            &zc->appliedParams,
+            dst, dstCapacity,
+            src, srcSize,
+            zc->bmi2, lastBlock,
+            zc->entropyWorkspace, ENTROPY_WORKSPACE_SIZE /* statically allocated in resetCCtx */);
+}

data/ext/zstdlib_c/zstd-1.5.2/lib/compress/zstd_compress_superblock.h

@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) Yann Collet, Facebook, Inc.
+ * All rights reserved.
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+ */
+
+#ifndef ZSTD_COMPRESS_ADVANCED_H
+#define ZSTD_COMPRESS_ADVANCED_H
+
+/*-*************************************
+*  Dependencies
+***************************************/
+
+#include "../zstd.h" /* ZSTD_CCtx */
+
+/*-*************************************
+*  Target Compressed Block Size
+***************************************/
+
+/* ZSTD_compressSuperBlock() :
+ * Used to compress a super block when targetCBlockSize is being used.
+ * The given block will be compressed into multiple sub blocks that are around targetCBlockSize. */
+size_t ZSTD_compressSuperBlock(ZSTD_CCtx* zc,
+                               void* dst, size_t dstCapacity,
+                               void const* src, size_t srcSize,
+                               unsigned lastBlock);
+
+#endif /* ZSTD_COMPRESS_ADVANCED_H */