zstdlib 0.7.0 → 0.8.0

data/ext/zstdlib/{zstd-1.4.5 → zstd-1.5.0}/lib/decompress/zstd_decompress_block.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016-2020, Yann Collet, Facebook, Inc.
+ * Copyright (c) Yann Collet, Facebook, Inc.
  * All rights reserved.
  *
  * This source code is licensed under both the BSD-style license (found in the
@@ -15,7 +15,7 @@
 /*-*******************************************************
  *  Dependencies
  *********************************************************/
-#include <stddef.h>   /* size_t */
+#include "../common/zstd_deps.h"   /* size_t */
 #include "../zstd.h"    /* DCtx, and some public functions */
 #include "../common/zstd_internal.h"  /* blockProperties_t, and some public functions */
 #include "zstd_decompress_internal.h"  /* ZSTD_seqSymbol */
@@ -48,12 +48,15 @@ size_t ZSTD_decompressBlock_internal(ZSTD_DCtx* dctx,
  * this function must be called with valid parameters only
  * (dt is large enough, normalizedCounter distribution total is a power of 2, max is within range, etc.)
  * in which case it cannot fail.
+ * The workspace must be 4-byte aligned and at least ZSTD_BUILD_FSE_TABLE_WKSP_SIZE bytes, which is
+ * defined in zstd_decompress_internal.h.
  * Internal use only.
  */
 void ZSTD_buildFSETable(ZSTD_seqSymbol* dt,
              const short* normalizedCounter, unsigned maxSymbolValue,
              const U32* baseValue, const U32* nbAdditionalBits,
-                   unsigned tableLog);
+                   unsigned tableLog, void* wksp, size_t wkspSize,
+                   int bmi2);
 
 
 #endif /* ZSTD_DEC_BLOCK_H */

data/ext/zstdlib/{zstd-1.4.5 → zstd-1.5.0}/lib/decompress/zstd_decompress_internal.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016-2020, Yann Collet, Facebook, Inc.
+ * Copyright (c) Yann Collet, Facebook, Inc.
  * All rights reserved.
  *
  * This source code is licensed under both the BSD-style license (found in the
@@ -27,26 +27,26 @@
 /*-*******************************************************
  *  Constants
  *********************************************************/
-static const U32 LL_base[MaxLL+1] = {
+static UNUSED_ATTR const U32 LL_base[MaxLL+1] = {
                  0,    1,    2,     3,     4,     5,     6,      7,
                  8,    9,   10,    11,    12,    13,    14,     15,
                 16,   18,   20,    22,    24,    28,    32,     40,
                 48,   64, 0x80, 0x100, 0x200, 0x400, 0x800, 0x1000,
                 0x2000, 0x4000, 0x8000, 0x10000 };
 
-static const U32 OF_base[MaxOff+1] = {
+static UNUSED_ATTR const U32 OF_base[MaxOff+1] = {
                  0,        1,       1,       5,     0xD,     0x1D,     0x3D,     0x7D,
                  0xFD,   0x1FD,   0x3FD,   0x7FD,   0xFFD,   0x1FFD,   0x3FFD,   0x7FFD,
                  0xFFFD, 0x1FFFD, 0x3FFFD, 0x7FFFD, 0xFFFFD, 0x1FFFFD, 0x3FFFFD, 0x7FFFFD,
                  0xFFFFFD, 0x1FFFFFD, 0x3FFFFFD, 0x7FFFFFD, 0xFFFFFFD, 0x1FFFFFFD, 0x3FFFFFFD, 0x7FFFFFFD };
 
-static const U32 OF_bits[MaxOff+1] = {
+static UNUSED_ATTR const U32 OF_bits[MaxOff+1] = {
                      0,  1,  2,  3,  4,  5,  6,  7,
                      8,  9, 10, 11, 12, 13, 14, 15,
                     16, 17, 18, 19, 20, 21, 22, 23,
                     24, 25, 26, 27, 28, 29, 30, 31 };
 
-static const U32 ML_base[MaxML+1] = {
+static UNUSED_ATTR const U32 ML_base[MaxML+1] = {
                      3,  4,  5,    6,     7,     8,     9,    10,
                     11, 12, 13,   14,    15,    16,    17,    18,
                     19, 20, 21,   22,    23,    24,    25,    26,
@@ -73,12 +73,16 @@ static const U32 ML_base[MaxML+1] = {
 
  #define SEQSYMBOL_TABLE_SIZE(log)   (1 + (1 << (log)))
 
+#define ZSTD_BUILD_FSE_TABLE_WKSP_SIZE (sizeof(S16) * (MaxSeq + 1) + (1u << MaxFSELog) + sizeof(U64))
+#define ZSTD_BUILD_FSE_TABLE_WKSP_SIZE_U32 ((ZSTD_BUILD_FSE_TABLE_WKSP_SIZE + sizeof(U32) - 1) / sizeof(U32))
+
 typedef struct {
     ZSTD_seqSymbol LLTable[SEQSYMBOL_TABLE_SIZE(LLFSELog)];    /* Note : Space reserved for FSE Tables */
     ZSTD_seqSymbol OFTable[SEQSYMBOL_TABLE_SIZE(OffFSELog)];   /* is also used as temporary workspace while building hufTable during DDict creation */
     ZSTD_seqSymbol MLTable[SEQSYMBOL_TABLE_SIZE(MLFSELog)];    /* and therefore must be at least HUF_DECOMPRESS_WORKSPACE_SIZE large */
     HUF_DTable hufTable[HUF_DTABLE_SIZE(HufLog)];  /* can accommodate HUF_decompress4X */
     U32 rep[ZSTD_REP_NUM];
+    U32 workspace[ZSTD_BUILD_FSE_TABLE_WKSP_SIZE_U32];
 } ZSTD_entropyDTables_t;
 
 typedef enum { ZSTDds_getFrameHeaderSize, ZSTDds_decodeFrameHeader,
@@ -95,10 +99,12 @@ typedef enum {
     ZSTD_use_once = 1            /* Use the dictionary once and set to ZSTD_dont_use */
 } ZSTD_dictUses_e;
 
-typedef enum {
-    ZSTD_obm_buffered = 0,  /* Buffer the output */
-    ZSTD_obm_stable = 1     /* ZSTD_outBuffer is stable */
-} ZSTD_outBufferMode_e;
+/* Hashset for storing references to multiple ZSTD_DDict within ZSTD_DCtx */
+typedef struct {
+    const ZSTD_DDict** ddictPtrTable;
+    size_t ddictPtrTableSize;
+    size_t ddictPtrCount;
+} ZSTD_DDictHashSet;
 
 struct ZSTD_DCtx_s
 {
@@ -114,6 +120,7 @@ struct ZSTD_DCtx_s
     const void* dictEnd;          /* end of previous segment */
     size_t expected;
     ZSTD_frameHeader fParams;
+    U64 processedCSize;
     U64 decodedSize;
     blockType_e bType;            /* used in ZSTD_decompressContinue(), store blockType between block header decoding and block decompression stages */
     ZSTD_dStage stage;
@@ -122,6 +129,8 @@ struct ZSTD_DCtx_s
     XXH64_state_t xxhState;
     size_t headerSize;
     ZSTD_format_e format;
+    ZSTD_forceIgnoreChecksum_e forceIgnoreChecksum;   /* User specified: if == 1, will ignore checksums in compressed frame. Default == 0 */
+    U32 validateChecksum;         /* if == 1, will validate checksum. Is == 1 if (fParams.checksumFlag == 1) and (forceIgnoreChecksum == 0). */
     const BYTE* litPtr;
     ZSTD_customMem customMem;
     size_t litSize;
@@ -135,6 +144,8 @@ struct ZSTD_DCtx_s
     U32 dictID;
     int ddictIsCold;             /* if == 1 : dictionary is "new" for working context, and presumed "cold" (not in cpu cache) */
     ZSTD_dictUses_e dictUses;
+    ZSTD_DDictHashSet* ddictSet;                    /* Hash set for multiple ddicts */
+    ZSTD_refMultipleDDicts_e refMultipleDDicts;     /* User specified: if == 1, will allow references to multiple DDicts. Default == 0 (disabled) */
 
     /* streaming */
     ZSTD_dStreamStage streamStage;
@@ -152,7 +163,7 @@ struct ZSTD_DCtx_s
     U32 legacyVersion;
     U32 hostageByte;
     int noForwardProgress;
-    ZSTD_outBufferMode_e outBufferMode;
+    ZSTD_bufferMode_e outBufferMode;
     ZSTD_outBuffer expectedOutBuffer;
 
     /* workspace */
@@ -165,6 +176,11 @@ struct ZSTD_DCtx_s
     void const* dictContentBeginForFuzzing;
     void const* dictContentEndForFuzzing;
 #endif
+
+    /* Tracing */
+#if ZSTD_TRACE
+    ZSTD_TraceCtx traceCtx;
+#endif
 };  /* typedef'd to ZSTD_DCtx within "zstd.h" */
 
 
@@ -183,7 +199,7 @@ size_t ZSTD_loadDEntropy(ZSTD_entropyDTables_t* entropy,
  *  If yes, do nothing (continue on current segment).
  *  If not, classify previous segment as "external dictionary", and start a new segment.
  *  This function cannot fail. */
-void ZSTD_checkContinuity(ZSTD_DCtx* dctx, const void* dst);
+void ZSTD_checkContinuity(ZSTD_DCtx* dctx, const void* dst, size_t dstSize);
 
 
 #endif /* ZSTD_DECOMPRESS_INTERNAL_H */

data/ext/zstdlib/zstd-1.5.0/lib/zdict.h

@@ -0,0 +1,452 @@
+/*
+ * Copyright (c) Yann Collet, Facebook, Inc.
+ * All rights reserved.
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+ */
+
+#ifndef DICTBUILDER_H_001
+#define DICTBUILDER_H_001
+
+#if defined (__cplusplus)
+extern "C" {
+#endif
+
+
+/*======  Dependencies  ======*/
+#include <stddef.h>  /* size_t */
+
+
+/* =====   ZDICTLIB_API : control library symbols visibility   ===== */
+#ifndef ZDICTLIB_VISIBILITY
+#  if defined(__GNUC__) && (__GNUC__ >= 4)
+#    define ZDICTLIB_VISIBILITY __attribute__ ((visibility ("default")))
+#  else
+#    define ZDICTLIB_VISIBILITY
+#  endif
+#endif
+#if defined(ZSTD_DLL_EXPORT) && (ZSTD_DLL_EXPORT==1)
+#  define ZDICTLIB_API __declspec(dllexport) ZDICTLIB_VISIBILITY
+#elif defined(ZSTD_DLL_IMPORT) && (ZSTD_DLL_IMPORT==1)
+#  define ZDICTLIB_API __declspec(dllimport) ZDICTLIB_VISIBILITY /* It isn't required but allows to generate better code, saving a function pointer load from the IAT and an indirect jump.*/
+#else
+#  define ZDICTLIB_API ZDICTLIB_VISIBILITY
+#endif
+
+/*******************************************************************************
+ * Zstd dictionary builder
+ *
+ * FAQ
+ * ===
+ * Why should I use a dictionary?
+ * ------------------------------
+ *
+ * Zstd can use dictionaries to improve compression ratio of small data.
+ * Traditionally small files don't compress well because there is very little
+ * repetion in a single sample, since it is small. But, if you are compressing
+ * many similar files, like a bunch of JSON records that share the same
+ * structure, you can train a dictionary on ahead of time on some samples of
+ * these files. Then, zstd can use the dictionary to find repetitions that are
+ * present across samples. This can vastly improve compression ratio.
+ *
+ * When is a dictionary useful?
+ * ----------------------------
+ *
+ * Dictionaries are useful when compressing many small files that are similar.
+ * The larger a file is, the less benefit a dictionary will have. Generally,
+ * we don't expect dictionary compression to be effective past 100KB. And the
+ * smaller a file is, the more we would expect the dictionary to help.
+ *
+ * How do I use a dictionary?
+ * --------------------------
+ *
+ * Simply pass the dictionary to the zstd compressor with
+ * `ZSTD_CCtx_loadDictionary()`. The same dictionary must then be passed to
+ * the decompressor, using `ZSTD_DCtx_loadDictionary()`. There are other
+ * more advanced functions that allow selecting some options, see zstd.h for
+ * complete documentation.
+ *
+ * What is a zstd dictionary?
+ * --------------------------
+ *
+ * A zstd dictionary has two pieces: Its header, and its content. The header
+ * contains a magic number, the dictionary ID, and entropy tables. These
+ * entropy tables allow zstd to save on header costs in the compressed file,
+ * which really matters for small data. The content is just bytes, which are
+ * repeated content that is common across many samples.
+ *
+ * What is a raw content dictionary?
+ * ---------------------------------
+ *
+ * A raw content dictionary is just bytes. It doesn't have a zstd dictionary
+ * header, a dictionary ID, or entropy tables. Any buffer is a valid raw
+ * content dictionary.
+ *
+ * How do I train a dictionary?
+ * ----------------------------
+ *
+ * Gather samples from your use case. These samples should be similar to each
+ * other. If you have several use cases, you could try to train one dictionary
+ * per use case.
+ *
+ * Pass those samples to `ZDICT_trainFromBuffer()` and that will train your
+ * dictionary. There are a few advanced versions of this function, but this
+ * is a great starting point. If you want to further tune your dictionary
+ * you could try `ZDICT_optimizeTrainFromBuffer_cover()`. If that is too slow
+ * you can try `ZDICT_optimizeTrainFromBuffer_fastCover()`.
+ *
+ * If the dictionary training function fails, that is likely because you
+ * either passed too few samples, or a dictionary would not be effective
+ * for your data. Look at the messages that the dictionary trainer printed,
+ * if it doesn't say too few samples, then a dictionary would not be effective.
+ *
+ * How large should my dictionary be?
+ * ----------------------------------
+ *
+ * A reasonable dictionary size, the `dictBufferCapacity`, is about 100KB.
+ * The zstd CLI defaults to a 110KB dictionary. You likely don't need a
+ * dictionary larger than that. But, most use cases can get away with a
+ * smaller dictionary. The advanced dictionary builders can automatically
+ * shrink the dictionary for you, and select a the smallest size that
+ * doesn't hurt compression ratio too much. See the `shrinkDict` parameter.
+ * A smaller dictionary can save memory, and potentially speed up
+ * compression.
+ *
+ * How many samples should I provide to the dictionary builder?
+ * ------------------------------------------------------------
+ *
+ * We generally recommend passing ~100x the size of the dictionary
+ * in samples. A few thousand should suffice. Having too few samples
+ * can hurt the dictionaries effectiveness. Having more samples will
+ * only improve the dictionaries effectiveness. But having too many
+ * samples can slow down the dictionary builder.
+ *
+ * How do I determine if a dictionary will be effective?
+ * -----------------------------------------------------
+ *
+ * Simply train a dictionary and try it out. You can use zstd's built in
+ * benchmarking tool to test the dictionary effectiveness.
+ *
+ *   # Benchmark levels 1-3 without a dictionary
+ *   zstd -b1e3 -r /path/to/my/files
+ *   # Benchmark levels 1-3 with a dictioanry
+ *   zstd -b1e3 -r /path/to/my/files -D /path/to/my/dictionary
+ *
+ * When should I retrain a dictionary?
+ * -----------------------------------
+ *
+ * You should retrain a dictionary when its effectiveness drops. Dictionary
+ * effectiveness drops as the data you are compressing changes. Generally, we do
+ * expect dictionaries to "decay" over time, as your data changes, but the rate
+ * at which they decay depends on your use case. Internally, we regularly
+ * retrain dictionaries, and if the new dictionary performs significantly
+ * better than the old dictionary, we will ship the new dictionary.
+ *
+ * I have a raw content dictionary, how do I turn it into a zstd dictionary?
+ * -------------------------------------------------------------------------
+ *
+ * If you have a raw content dictionary, e.g. by manually constructing it, or
+ * using a third-party dictionary builder, you can turn it into a zstd
+ * dictionary by using `ZDICT_finalizeDictionary()`. You'll also have to
+ * provide some samples of the data. It will add the zstd header to the
+ * raw content, which contains a dictionary ID and entropy tables, which
+ * will improve compression ratio, and allow zstd to write the dictionary ID
+ * into the frame, if you so choose.
+ *
+ * Do I have to use zstd's dictionary builder?
+ * -------------------------------------------
+ *
+ * No! You can construct dictionary content however you please, it is just
+ * bytes. It will always be valid as a raw content dictionary. If you want
+ * a zstd dictionary, which can improve compression ratio, use
+ * `ZDICT_finalizeDictionary()`.
+ *
+ * What is the attack surface of a zstd dictionary?
+ * ------------------------------------------------
+ *
+ * Zstd is heavily fuzz tested, including loading fuzzed dictionaries, so
+ * zstd should never crash, or access out-of-bounds memory no matter what
+ * the dictionary is. However, if an attacker can control the dictionary
+ * during decompression, they can cause zstd to generate arbitrary bytes,
+ * just like if they controlled the compressed data.
+ *
+ ******************************************************************************/
+
+
+/*! ZDICT_trainFromBuffer():
+ *  Train a dictionary from an array of samples.
+ *  Redirect towards ZDICT_optimizeTrainFromBuffer_fastCover() single-threaded, with d=8, steps=4,
+ *  f=20, and accel=1.
+ *  Samples must be stored concatenated in a single flat buffer `samplesBuffer`,
+ *  supplied with an array of sizes `samplesSizes`, providing the size of each sample, in order.
+ *  The resulting dictionary will be saved into `dictBuffer`.
+ * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`)
+ *          or an error code, which can be tested with ZDICT_isError().
+ *  Note:  Dictionary training will fail if there are not enough samples to construct a
+ *         dictionary, or if most of the samples are too small (< 8 bytes being the lower limit).
+ *         If dictionary training fails, you should use zstd without a dictionary, as the dictionary
+ *         would've been ineffective anyways. If you believe your samples would benefit from a dictionary
+ *         please open an issue with details, and we can look into it.
+ *  Note: ZDICT_trainFromBuffer()'s memory usage is about 6 MB.
+ *  Tips: In general, a reasonable dictionary has a size of ~ 100 KB.
+ *        It's possible to select smaller or larger size, just by specifying `dictBufferCapacity`.
+ *        In general, it's recommended to provide a few thousands samples, though this can vary a lot.
+ *        It's recommended that total size of all samples be about ~x100 times the target size of dictionary.
+ */
+ZDICTLIB_API size_t ZDICT_trainFromBuffer(void* dictBuffer, size_t dictBufferCapacity,
+                                    const void* samplesBuffer,
+                                    const size_t* samplesSizes, unsigned nbSamples);
+
+typedef struct {
+    int      compressionLevel;   /*< optimize for a specific zstd compression level; 0 means default */
+    unsigned notificationLevel;  /*< Write log to stderr; 0 = none (default); 1 = errors; 2 = progression; 3 = details; 4 = debug; */
+    unsigned dictID;             /*< force dictID value; 0 means auto mode (32-bits random value)
+                                  *   NOTE: The zstd format reserves some dictionary IDs for future use.
+                                  *         You may use them in private settings, but be warned that they
+                                  *         may be used by zstd in a public dictionary registry in the future.
+                                  *         These dictionary IDs are:
+                                  *           - low range  : <= 32767
+                                  *           - high range : >= (2^31)
+                                  */
+} ZDICT_params_t;
+
+/*! ZDICT_finalizeDictionary():
+ * Given a custom content as a basis for dictionary, and a set of samples,
+ * finalize dictionary by adding headers and statistics according to the zstd
+ * dictionary format.
+ *
+ * Samples must be stored concatenated in a flat buffer `samplesBuffer`,
+ * supplied with an array of sizes `samplesSizes`, providing the size of each
+ * sample in order. The samples are used to construct the statistics, so they
+ * should be representative of what you will compress with this dictionary.
+ *
+ * The compression level can be set in `parameters`. You should pass the
+ * compression level you expect to use in production. The statistics for each
+ * compression level differ, so tuning the dictionary for the compression level
+ * can help quite a bit.
+ *
+ * You can set an explicit dictionary ID in `parameters`, or allow us to pick
+ * a random dictionary ID for you, but we can't guarantee no collisions.
+ *
+ * The dstDictBuffer and the dictContent may overlap, and the content will be
+ * appended to the end of the header. If the header + the content doesn't fit in
+ * maxDictSize the beginning of the content is truncated to make room, since it
+ * is presumed that the most profitable content is at the end of the dictionary,
+ * since that is the cheapest to reference.
+ *
+ * `dictContentSize` must be >= ZDICT_CONTENTSIZE_MIN bytes.
+ * `maxDictSize` must be >= max(dictContentSize, ZSTD_DICTSIZE_MIN).
+ *
+ * @return: size of dictionary stored into `dstDictBuffer` (<= `maxDictSize`),
+ *          or an error code, which can be tested by ZDICT_isError().
+ * Note: ZDICT_finalizeDictionary() will push notifications into stderr if
+ *       instructed to, using notificationLevel>0.
+ * NOTE: This function currently may fail in several edge cases including:
+ *         * Not enough samples
+ *         * Samples are uncompressible
+ *         * Samples are all exactly the same
+ */
+ZDICTLIB_API size_t ZDICT_finalizeDictionary(void* dstDictBuffer, size_t maxDictSize,
+                                const void* dictContent, size_t dictContentSize,
+                                const void* samplesBuffer, const size_t* samplesSizes, unsigned nbSamples,
+                                ZDICT_params_t parameters);
+
+
+/*======   Helper functions   ======*/
+ZDICTLIB_API unsigned ZDICT_getDictID(const void* dictBuffer, size_t dictSize);  /**< extracts dictID; @return zero if error (not a valid dictionary) */
+ZDICTLIB_API size_t ZDICT_getDictHeaderSize(const void* dictBuffer, size_t dictSize);  /* returns dict header size; returns a ZSTD error code on failure */
+ZDICTLIB_API unsigned ZDICT_isError(size_t errorCode);
+ZDICTLIB_API const char* ZDICT_getErrorName(size_t errorCode);
+
+
+
+#ifdef ZDICT_STATIC_LINKING_ONLY
+
+/* ====================================================================================
+ * The definitions in this section are considered experimental.
+ * They should never be used with a dynamic library, as they may change in the future.
+ * They are provided for advanced usages.
+ * Use them only in association with static linking.
+ * ==================================================================================== */
+
+#define ZDICT_CONTENTSIZE_MIN 128
+#define ZDICT_DICTSIZE_MIN    256
+
+/*! ZDICT_cover_params_t:
+ *  k and d are the only required parameters.
+ *  For others, value 0 means default.
+ */
+typedef struct {
+    unsigned k;                  /* Segment size : constraint: 0 < k : Reasonable range [16, 2048+] */
+    unsigned d;                  /* dmer size : constraint: 0 < d <= k : Reasonable range [6, 16] */
+    unsigned steps;              /* Number of steps : Only used for optimization : 0 means default (40) : Higher means more parameters checked */
+    unsigned nbThreads;          /* Number of threads : constraint: 0 < nbThreads : 1 means single-threaded : Only used for optimization : Ignored if ZSTD_MULTITHREAD is not defined */
+    double splitPoint;           /* Percentage of samples used for training: Only used for optimization : the first nbSamples * splitPoint samples will be used to training, the last nbSamples * (1 - splitPoint) samples will be used for testing, 0 means default (1.0), 1.0 when all samples are used for both training and testing */
+    unsigned shrinkDict;         /* Train dictionaries to shrink in size starting from the minimum size and selects the smallest dictionary that is shrinkDictMaxRegression% worse than the largest dictionary. 0 means no shrinking and 1 means shrinking  */
+    unsigned shrinkDictMaxRegression; /* Sets shrinkDictMaxRegression so that a smaller dictionary can be at worse shrinkDictMaxRegression% worse than the max dict size dictionary. */
+    ZDICT_params_t zParams;
+} ZDICT_cover_params_t;
+
+typedef struct {
+    unsigned k;                  /* Segment size : constraint: 0 < k : Reasonable range [16, 2048+] */
+    unsigned d;                  /* dmer size : constraint: 0 < d <= k : Reasonable range [6, 16] */
+    unsigned f;                  /* log of size of frequency array : constraint: 0 < f <= 31 : 1 means default(20)*/
+    unsigned steps;              /* Number of steps : Only used for optimization : 0 means default (40) : Higher means more parameters checked */
+    unsigned nbThreads;          /* Number of threads : constraint: 0 < nbThreads : 1 means single-threaded : Only used for optimization : Ignored if ZSTD_MULTITHREAD is not defined */
+    double splitPoint;           /* Percentage of samples used for training: Only used for optimization : the first nbSamples * splitPoint samples will be used to training, the last nbSamples * (1 - splitPoint) samples will be used for testing, 0 means default (0.75), 1.0 when all samples are used for both training and testing */
+    unsigned accel;              /* Acceleration level: constraint: 0 < accel <= 10, higher means faster and less accurate, 0 means default(1) */
+    unsigned shrinkDict;         /* Train dictionaries to shrink in size starting from the minimum size and selects the smallest dictionary that is shrinkDictMaxRegression% worse than the largest dictionary. 0 means no shrinking and 1 means shrinking  */
+    unsigned shrinkDictMaxRegression; /* Sets shrinkDictMaxRegression so that a smaller dictionary can be at worse shrinkDictMaxRegression% worse than the max dict size dictionary. */
+
+    ZDICT_params_t zParams;
+} ZDICT_fastCover_params_t;
+
+/*! ZDICT_trainFromBuffer_cover():
+ *  Train a dictionary from an array of samples using the COVER algorithm.
+ *  Samples must be stored concatenated in a single flat buffer `samplesBuffer`,
+ *  supplied with an array of sizes `samplesSizes`, providing the size of each sample, in order.
+ *  The resulting dictionary will be saved into `dictBuffer`.
+ * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`)
+ *          or an error code, which can be tested with ZDICT_isError().
+ *          See ZDICT_trainFromBuffer() for details on failure modes.
+ *  Note: ZDICT_trainFromBuffer_cover() requires about 9 bytes of memory for each input byte.
+ *  Tips: In general, a reasonable dictionary has a size of ~ 100 KB.
+ *        It's possible to select smaller or larger size, just by specifying `dictBufferCapacity`.
+ *        In general, it's recommended to provide a few thousands samples, though this can vary a lot.
+ *        It's recommended that total size of all samples be about ~x100 times the target size of dictionary.
+ */
+ZDICTLIB_API size_t ZDICT_trainFromBuffer_cover(
+          void *dictBuffer, size_t dictBufferCapacity,
+    const void *samplesBuffer, const size_t *samplesSizes, unsigned nbSamples,
+          ZDICT_cover_params_t parameters);
+
+/*! ZDICT_optimizeTrainFromBuffer_cover():
+ * The same requirements as above hold for all the parameters except `parameters`.
+ * This function tries many parameter combinations and picks the best parameters.
+ * `*parameters` is filled with the best parameters found,
+ * dictionary constructed with those parameters is stored in `dictBuffer`.
+ *
+ * All of the parameters d, k, steps are optional.
+ * If d is non-zero then we don't check multiple values of d, otherwise we check d = {6, 8}.
+ * if steps is zero it defaults to its default value.
+ * If k is non-zero then we don't check multiple values of k, otherwise we check steps values in [50, 2000].
+ *
+ * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`)
+ *          or an error code, which can be tested with ZDICT_isError().
+ *          On success `*parameters` contains the parameters selected.
+ *          See ZDICT_trainFromBuffer() for details on failure modes.
+ * Note: ZDICT_optimizeTrainFromBuffer_cover() requires about 8 bytes of memory for each input byte and additionally another 5 bytes of memory for each byte of memory for each thread.
+ */
+ZDICTLIB_API size_t ZDICT_optimizeTrainFromBuffer_cover(
+          void* dictBuffer, size_t dictBufferCapacity,
+    const void* samplesBuffer, const size_t* samplesSizes, unsigned nbSamples,
+          ZDICT_cover_params_t* parameters);
+
+/*! ZDICT_trainFromBuffer_fastCover():
+ *  Train a dictionary from an array of samples using a modified version of COVER algorithm.
+ *  Samples must be stored concatenated in a single flat buffer `samplesBuffer`,
+ *  supplied with an array of sizes `samplesSizes`, providing the size of each sample, in order.
+ *  d and k are required.
+ *  All other parameters are optional, will use default values if not provided
+ *  The resulting dictionary will be saved into `dictBuffer`.
+ * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`)
+ *          or an error code, which can be tested with ZDICT_isError().
+ *          See ZDICT_trainFromBuffer() for details on failure modes.
+ *  Note: ZDICT_trainFromBuffer_fastCover() requires 6 * 2^f bytes of memory.
+ *  Tips: In general, a reasonable dictionary has a size of ~ 100 KB.
+ *        It's possible to select smaller or larger size, just by specifying `dictBufferCapacity`.
+ *        In general, it's recommended to provide a few thousands samples, though this can vary a lot.
+ *        It's recommended that total size of all samples be about ~x100 times the target size of dictionary.
+ */
+ZDICTLIB_API size_t ZDICT_trainFromBuffer_fastCover(void *dictBuffer,
+                    size_t dictBufferCapacity, const void *samplesBuffer,
+                    const size_t *samplesSizes, unsigned nbSamples,
+                    ZDICT_fastCover_params_t parameters);
+
+/*! ZDICT_optimizeTrainFromBuffer_fastCover():
+ * The same requirements as above hold for all the parameters except `parameters`.
+ * This function tries many parameter combinations (specifically, k and d combinations)
+ * and picks the best parameters. `*parameters` is filled with the best parameters found,
+ * dictionary constructed with those parameters is stored in `dictBuffer`.
+ * All of the parameters d, k, steps, f, and accel are optional.
+ * If d is non-zero then we don't check multiple values of d, otherwise we check d = {6, 8}.
+ * if steps is zero it defaults to its default value.
+ * If k is non-zero then we don't check multiple values of k, otherwise we check steps values in [50, 2000].
+ * If f is zero, default value of 20 is used.
+ * If accel is zero, default value of 1 is used.
+ *
+ * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`)
+ *          or an error code, which can be tested with ZDICT_isError().
+ *          On success `*parameters` contains the parameters selected.
+ *          See ZDICT_trainFromBuffer() for details on failure modes.
+ * Note: ZDICT_optimizeTrainFromBuffer_fastCover() requires about 6 * 2^f bytes of memory for each thread.
+ */
+ZDICTLIB_API size_t ZDICT_optimizeTrainFromBuffer_fastCover(void* dictBuffer,
+                    size_t dictBufferCapacity, const void* samplesBuffer,
+                    const size_t* samplesSizes, unsigned nbSamples,
+                    ZDICT_fastCover_params_t* parameters);
+
+typedef struct {
+    unsigned selectivityLevel;   /* 0 means default; larger => select more => larger dictionary */
+    ZDICT_params_t zParams;
+} ZDICT_legacy_params_t;
+
+/*! ZDICT_trainFromBuffer_legacy():
+ *  Train a dictionary from an array of samples.
+ *  Samples must be stored concatenated in a single flat buffer `samplesBuffer`,
+ *  supplied with an array of sizes `samplesSizes`, providing the size of each sample, in order.
+ *  The resulting dictionary will be saved into `dictBuffer`.
+ * `parameters` is optional and can be provided with values set to 0 to mean "default".
+ * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`)
+ *          or an error code, which can be tested with ZDICT_isError().
+ *          See ZDICT_trainFromBuffer() for details on failure modes.
+ *  Tips: In general, a reasonable dictionary has a size of ~ 100 KB.
+ *        It's possible to select smaller or larger size, just by specifying `dictBufferCapacity`.
+ *        In general, it's recommended to provide a few thousands samples, though this can vary a lot.
+ *        It's recommended that total size of all samples be about ~x100 times the target size of dictionary.
+ *  Note: ZDICT_trainFromBuffer_legacy() will send notifications into stderr if instructed to, using notificationLevel>0.
+ */
+ZDICTLIB_API size_t ZDICT_trainFromBuffer_legacy(
+    void* dictBuffer, size_t dictBufferCapacity,
+    const void* samplesBuffer, const size_t* samplesSizes, unsigned nbSamples,
+    ZDICT_legacy_params_t parameters);
+
+
+/* Deprecation warnings */
+/* It is generally possible to disable deprecation warnings from compiler,
+   for example with -Wno-deprecated-declarations for gcc
+   or _CRT_SECURE_NO_WARNINGS in Visual.
+   Otherwise, it's also possible to manually define ZDICT_DISABLE_DEPRECATE_WARNINGS */
+#ifdef ZDICT_DISABLE_DEPRECATE_WARNINGS
+#  define ZDICT_DEPRECATED(message) ZDICTLIB_API   /* disable deprecation warnings */
+#else
+#  define ZDICT_GCC_VERSION (__GNUC__ * 100 + __GNUC_MINOR__)
+#  if defined (__cplusplus) && (__cplusplus >= 201402) /* C++14 or greater */
+#    define ZDICT_DEPRECATED(message) [[deprecated(message)]] ZDICTLIB_API
+#  elif defined(__clang__) || (ZDICT_GCC_VERSION >= 405)
+#    define ZDICT_DEPRECATED(message) ZDICTLIB_API __attribute__((deprecated(message)))
+#  elif (ZDICT_GCC_VERSION >= 301)
+#    define ZDICT_DEPRECATED(message) ZDICTLIB_API __attribute__((deprecated))
+#  elif defined(_MSC_VER)
+#    define ZDICT_DEPRECATED(message) ZDICTLIB_API __declspec(deprecated(message))
+#  else
+#    pragma message("WARNING: You need to implement ZDICT_DEPRECATED for this compiler")
+#    define ZDICT_DEPRECATED(message) ZDICTLIB_API
+#  endif
+#endif /* ZDICT_DISABLE_DEPRECATE_WARNINGS */
+
+ZDICT_DEPRECATED("use ZDICT_finalizeDictionary() instead")
+size_t ZDICT_addEntropyTablesFromBuffer(void* dictBuffer, size_t dictContentSize, size_t dictBufferCapacity,
+                                  const void* samplesBuffer, const size_t* samplesSizes, unsigned nbSamples);
+
+
+#endif   /* ZDICT_STATIC_LINKING_ONLY */
+
+#if defined (__cplusplus)
+}
+#endif
+
+#endif   /* DICTBUILDER_H_001 */