zstdlib 0.7.0-x86-mingw32 → 0.8.0-x86-mingw32

data/ext/zstdlib/{zstd-1.4.5 → zstd-1.5.0}/lib/zstd.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016-2020, Yann Collet, Facebook, Inc.
+ * Copyright (c) Yann Collet, Facebook, Inc.
  * All rights reserved.
  *
  * This source code is licensed under both the BSD-style license (found in the
@@ -71,17 +71,22 @@ extern "C" {
 
 /*------   Version   ------*/
 #define ZSTD_VERSION_MAJOR    1
-#define ZSTD_VERSION_MINOR    4
-#define ZSTD_VERSION_RELEASE  5
-
+#define ZSTD_VERSION_MINOR    5
+#define ZSTD_VERSION_RELEASE  0
 #define ZSTD_VERSION_NUMBER  (ZSTD_VERSION_MAJOR *100*100 + ZSTD_VERSION_MINOR *100 + ZSTD_VERSION_RELEASE)
-ZSTDLIB_API unsigned ZSTD_versionNumber(void);   /**< to check runtime library version */
+
+/*! ZSTD_versionNumber() :
+ *  Return runtime library version, the value is (MAJOR*100*100 + MINOR*100 + RELEASE). */
+ZSTDLIB_API unsigned ZSTD_versionNumber(void);
 
 #define ZSTD_LIB_VERSION ZSTD_VERSION_MAJOR.ZSTD_VERSION_MINOR.ZSTD_VERSION_RELEASE
 #define ZSTD_QUOTE(str) #str
 #define ZSTD_EXPAND_AND_QUOTE(str) ZSTD_QUOTE(str)
 #define ZSTD_VERSION_STRING ZSTD_EXPAND_AND_QUOTE(ZSTD_LIB_VERSION)
-ZSTDLIB_API const char* ZSTD_versionString(void);   /* requires v1.3.0+ */
+
+/*! ZSTD_versionString() :
+ *  Return runtime library version, like "1.4.5". Requires v1.3.0+. */
+ZSTDLIB_API const char* ZSTD_versionString(void);
 
 /* *************************************
  *  Default constant
@@ -104,7 +109,6 @@ ZSTDLIB_API const char* ZSTD_versionString(void);   /* requires v1.3.0+ */
 #define ZSTD_BLOCKSIZE_MAX     (1<<ZSTD_BLOCKSIZELOG_MAX)
 
 
-
 /***************************************
 *  Simple API
 ***************************************/
@@ -161,7 +165,7 @@ ZSTDLIB_API unsigned long long ZSTD_getFrameContentSize(const void *src, size_t
  * @return : decompressed size of `src` frame content _if known and not empty_, 0 otherwise. */
 ZSTDLIB_API unsigned long long ZSTD_getDecompressedSize(const void* src, size_t srcSize);
 
-/*! ZSTD_findFrameCompressedSize() :
+/*! ZSTD_findFrameCompressedSize() : Requires v1.4.0+
  * `src` should point to the start of a ZSTD frame or skippable frame.
  * `srcSize` must be >= first frame size
  * @return : the compressed size of the first frame starting at `src`,
@@ -175,8 +179,9 @@ ZSTDLIB_API size_t ZSTD_findFrameCompressedSize(const void* src, size_t srcSize)
 ZSTDLIB_API size_t      ZSTD_compressBound(size_t srcSize); /*!< maximum compressed size in worst case single-pass scenario */
 ZSTDLIB_API unsigned    ZSTD_isError(size_t code);          /*!< tells if a `size_t` function result is an error code */
 ZSTDLIB_API const char* ZSTD_getErrorName(size_t code);     /*!< provides readable string from an error code */
-ZSTDLIB_API int         ZSTD_minCLevel(void);               /*!< minimum negative compression level allowed */
+ZSTDLIB_API int         ZSTD_minCLevel(void);               /*!< minimum negative compression level allowed, requires v1.4.0+ */
 ZSTDLIB_API int         ZSTD_maxCLevel(void);               /*!< maximum compression level available */
+ZSTDLIB_API int         ZSTD_defaultCLevel(void);           /*!< default compression level, specified by ZSTD_CLEVEL_DEFAULT, requires v1.5.0+ */
 
 
 /***************************************
@@ -194,7 +199,7 @@ ZSTDLIB_API int         ZSTD_maxCLevel(void);               /*!< maximum compres
  */
 typedef struct ZSTD_CCtx_s ZSTD_CCtx;
 ZSTDLIB_API ZSTD_CCtx* ZSTD_createCCtx(void);
-ZSTDLIB_API size_t     ZSTD_freeCCtx(ZSTD_CCtx* cctx);
+ZSTDLIB_API size_t     ZSTD_freeCCtx(ZSTD_CCtx* cctx);  /* accept NULL pointer */
 
 /*! ZSTD_compressCCtx() :
  *  Same as ZSTD_compress(), using an explicit ZSTD_CCtx.
@@ -217,7 +222,7 @@ ZSTDLIB_API size_t ZSTD_compressCCtx(ZSTD_CCtx* cctx,
  *  Use one context per thread for parallel execution. */
 typedef struct ZSTD_DCtx_s ZSTD_DCtx;
 ZSTDLIB_API ZSTD_DCtx* ZSTD_createDCtx(void);
-ZSTDLIB_API size_t     ZSTD_freeDCtx(ZSTD_DCtx* dctx);
+ZSTDLIB_API size_t     ZSTD_freeDCtx(ZSTD_DCtx* dctx);  /* accept NULL pointer */
 
 /*! ZSTD_decompressDCtx() :
  *  Same as ZSTD_decompress(),
@@ -229,9 +234,9 @@ ZSTDLIB_API size_t ZSTD_decompressDCtx(ZSTD_DCtx* dctx,
                                  const void* src, size_t srcSize);
 
 
-/***************************************
-*  Advanced compression API
-***************************************/
+/*********************************************
+*  Advanced compression API (Requires v1.4.0+)
+**********************************************/
 
 /* API design :
  *   Parameters are pushed one by one into an existing context,
@@ -261,7 +266,6 @@ typedef enum { ZSTD_fast=1,
                          Only the order (from fast to strong) is guaranteed */
 } ZSTD_strategy;
 
-
 typedef enum {
 
     /* compression parameters
@@ -327,14 +331,15 @@ typedef enum {
                               * The higher the value of selected strategy, the more complex it is,
                               * resulting in stronger and slower compression.
                               * Special: value 0 means "use default strategy". */
-
     /* LDM mode parameters */
     ZSTD_c_enableLongDistanceMatching=160, /* Enable long distance matching.
                                      * This parameter is designed to improve compression ratio
                                      * for large inputs, by finding large matches at long distance.
                                      * It increases memory usage and window size.
                                      * Note: enabling this parameter increases default ZSTD_c_windowLog to 128 MB
-                                     * except when expressly set to a different value. */
+                                     * except when expressly set to a different value.
+                                     * Note: will be enabled by default if ZSTD_c_windowLog >= 128 MB and
+                                     * compression strategy >= ZSTD_btopt (== compression level 16+) */
     ZSTD_c_ldmHashLog=161,   /* Size of the table for long distance matching, as a power of 2.
                               * Larger values increase memory usage and compression ratio,
                               * but decrease compression speed.
@@ -365,20 +370,24 @@ typedef enum {
     ZSTD_c_dictIDFlag=202,   /* When applicable, dictionary's ID is written into frame header (default:1) */
 
     /* multi-threading parameters */
-    /* These parameters are only useful if multi-threading is enabled (compiled with build macro ZSTD_MULTITHREAD).
-     * They return an error otherwise. */
+    /* These parameters are only active if multi-threading is enabled (compiled with build macro ZSTD_MULTITHREAD).
+     * Otherwise, trying to set any other value than default (0) will be a no-op and return an error.
+     * In a situation where it's unknown if the linked library supports multi-threading or not,
+     * setting ZSTD_c_nbWorkers to any value >= 1 and consulting the return value provides a quick way to check this property.
+     */
     ZSTD_c_nbWorkers=400,    /* Select how many threads will be spawned to compress in parallel.
-                              * When nbWorkers >= 1, triggers asynchronous mode when used with ZSTD_compressStream*() :
+                              * When nbWorkers >= 1, triggers asynchronous mode when invoking ZSTD_compressStream*() :
                               * ZSTD_compressStream*() consumes input and flush output if possible, but immediately gives back control to caller,
-                              * while compression work is performed in parallel, within worker threads.
+                              * while compression is performed in parallel, within worker thread(s).
                               * (note : a strong exception to this rule is when first invocation of ZSTD_compressStream2() sets ZSTD_e_end :
                               *  in which case, ZSTD_compressStream2() delegates to ZSTD_compress2(), which is always a blocking call).
                               * More workers improve speed, but also increase memory usage.
-                              * Default value is `0`, aka "single-threaded mode" : no worker is spawned, compression is performed inside Caller's thread, all invocations are blocking */
+                              * Default value is `0`, aka "single-threaded mode" : no worker is spawned,
+                              * compression is performed inside Caller's thread, and all invocations are blocking */
     ZSTD_c_jobSize=401,      /* Size of a compression job. This value is enforced only when nbWorkers >= 1.
                               * Each compression job is completed in parallel, so this value can indirectly impact the nb of active threads.
                               * 0 means default, which is dynamically determined based on compression parameters.
-                              * Job size must be a minimum of overlap size, or 1 MB, whichever is largest.
+                              * Job size must be a minimum of overlap size, or ZSTDMT_JOBSIZE_MIN (= 512 KB), whichever is largest.
                               * The minimum size is automatically and transparently enforced. */
     ZSTD_c_overlapLog=402,   /* Control the overlap size, as a fraction of window size.
                               * The overlap size is an amount of data reloaded from previous job at the beginning of a new job.
@@ -403,6 +412,13 @@ typedef enum {
      * ZSTD_c_literalCompressionMode
      * ZSTD_c_targetCBlockSize
      * ZSTD_c_srcSizeHint
+     * ZSTD_c_enableDedicatedDictSearch
+     * ZSTD_c_stableInBuffer
+     * ZSTD_c_stableOutBuffer
+     * ZSTD_c_blockDelimiters
+     * ZSTD_c_validateSequences
+     * ZSTD_c_splitBlocks
+     * ZSTD_c_useRowMatchFinder
      * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them.
      * note : never ever use experimentalParam? names directly;
      *        also, the enums values themselves are unstable and can still change.
@@ -413,7 +429,15 @@ typedef enum {
      ZSTD_c_experimentalParam4=1001,
      ZSTD_c_experimentalParam5=1002,
      ZSTD_c_experimentalParam6=1003,
-     ZSTD_c_experimentalParam7=1004
+     ZSTD_c_experimentalParam7=1004,
+     ZSTD_c_experimentalParam8=1005,
+     ZSTD_c_experimentalParam9=1006,
+     ZSTD_c_experimentalParam10=1007,
+     ZSTD_c_experimentalParam11=1008,
+     ZSTD_c_experimentalParam12=1009,
+     ZSTD_c_experimentalParam13=1010,
+     ZSTD_c_experimentalParam14=1011,
+     ZSTD_c_experimentalParam15=1012
 } ZSTD_cParameter;
 
 typedef struct {
@@ -498,9 +522,9 @@ ZSTDLIB_API size_t ZSTD_compress2( ZSTD_CCtx* cctx,
                              const void* src, size_t srcSize);
 
 
-/***************************************
-*  Advanced decompression API
-***************************************/
+/***********************************************
+*  Advanced decompression API (Requires v1.4.0+)
+************************************************/
 
 /* The advanced API pushes parameters one by one into an existing DCtx context.
  * Parameters are sticky, and remain valid for all following frames
@@ -524,11 +548,15 @@ typedef enum {
      * At the time of this writing, they include :
      * ZSTD_d_format
      * ZSTD_d_stableOutBuffer
+     * ZSTD_d_forceIgnoreChecksum
+     * ZSTD_d_refMultipleDDicts
      * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them.
      * note : never ever use experimentalParam? names directly
      */
      ZSTD_d_experimentalParam1=1000,
-     ZSTD_d_experimentalParam2=1001
+     ZSTD_d_experimentalParam2=1001,
+     ZSTD_d_experimentalParam3=1002,
+     ZSTD_d_experimentalParam4=1003
 
 } ZSTD_dParameter;
 
@@ -642,7 +670,7 @@ typedef ZSTD_CCtx ZSTD_CStream;  /**< CCtx and CStream are now effectively same
                                  /* Continue to distinguish them for compatibility with older versions <= v1.2.0 */
 /*===== ZSTD_CStream management functions =====*/
 ZSTDLIB_API ZSTD_CStream* ZSTD_createCStream(void);
-ZSTDLIB_API size_t ZSTD_freeCStream(ZSTD_CStream* zcs);
+ZSTDLIB_API size_t ZSTD_freeCStream(ZSTD_CStream* zcs);  /* accept NULL pointer */
 
 /*===== Streaming compression functions =====*/
 typedef enum {
@@ -658,14 +686,15 @@ typedef enum {
                         : note : multithreaded compression will block to flush as much output as possible. */
 } ZSTD_EndDirective;
 
-/*! ZSTD_compressStream2() :
+/*! ZSTD_compressStream2() : Requires v1.4.0+
  *  Behaves about the same as ZSTD_compressStream, with additional control on end directive.
  *  - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*()
  *  - Compression parameters cannot be changed once compression is started (save a list of exceptions in multi-threading mode)
  *  - output->pos must be <= dstCapacity, input->pos must be <= srcSize
  *  - output->pos and input->pos will be updated. They are guaranteed to remain below their respective limit.
+ *  - endOp must be a valid directive
  *  - When nbWorkers==0 (default), function is blocking : it completes its job before returning to caller.
- *  - When nbWorkers>=1, function is non-blocking : it just acquires a copy of input, and distributes jobs to internal worker threads, flush whatever is available,
+ *  - When nbWorkers>=1, function is non-blocking : it copies a portion of input, distributes jobs to internal worker threads, flush to output whatever is available,
  *                                                  and then immediately returns, just indicating that there is some data remaining to be flushed.
  *                                                  The function nonetheless guarantees forward progress : it will return only after it reads or write at least 1+ byte.
  *  - Exception : if the first call requests a ZSTD_e_end directive and provides enough dstCapacity, the function delegates to ZSTD_compress2() which is always blocking.
@@ -703,11 +732,11 @@ ZSTDLIB_API size_t ZSTD_CStreamOutSize(void);   /**< recommended size for output
 
 
 /* *****************************************************************************
- * This following is a legacy streaming API.
+ * This following is a legacy streaming API, available since v1.0+ .
  * It can be replaced by ZSTD_CCtx_reset() and ZSTD_compressStream2().
  * It is redundant, but remains fully supported.
- * Advanced parameters and dictionary compression can only be used through the
- * new API.
+ * Streaming in combination with advanced parameters and dictionary compression
+ * can only be used through the new API.
  ******************************************************************************/
 
 /*!
@@ -762,7 +791,7 @@ typedef ZSTD_DCtx ZSTD_DStream;  /**< DCtx and DStream are now effectively same
                                  /* For compatibility with versions <= v1.2.0, prefer differentiating them. */
 /*===== ZSTD_DStream management functions =====*/
 ZSTDLIB_API ZSTD_DStream* ZSTD_createDStream(void);
-ZSTDLIB_API size_t ZSTD_freeDStream(ZSTD_DStream* zds);
+ZSTDLIB_API size_t ZSTD_freeDStream(ZSTD_DStream* zds);  /* accept NULL pointer */
 
 /*===== Streaming decompression functions =====*/
 
@@ -785,7 +814,7 @@ ZSTDLIB_API size_t ZSTD_DStreamOutSize(void);   /*!< recommended size for output
 /*! ZSTD_compress_usingDict() :
  *  Compression at an explicit compression level using a Dictionary.
  *  A dictionary can be any arbitrary data segment (also called a prefix),
- *  or a buffer with specified information (see dictBuilder/zdict.h).
+ *  or a buffer with specified information (see zdict.h).
  *  Note : This function loads the dictionary, resulting in significant startup delay.
  *         It's intended for a dictionary used only once.
  *  Note 2 : When `dict == NULL || dictSize < 8` no dictionary is used. */
@@ -828,7 +857,8 @@ ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict(const void* dictBuffer, size_t dictSize
                                          int compressionLevel);
 
 /*! ZSTD_freeCDict() :
- *  Function frees memory allocated by ZSTD_createCDict(). */
+ *  Function frees memory allocated by ZSTD_createCDict().
+ *  If a NULL pointer is passed, no operation is performed. */
 ZSTDLIB_API size_t      ZSTD_freeCDict(ZSTD_CDict* CDict);
 
 /*! ZSTD_compress_usingCDict() :
@@ -850,7 +880,8 @@ typedef struct ZSTD_DDict_s ZSTD_DDict;
 ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict(const void* dictBuffer, size_t dictSize);
 
 /*! ZSTD_freeDDict() :
- *  Function frees memory allocated with ZSTD_createDDict() */
+ *  Function frees memory allocated with ZSTD_createDDict()
+ *  If a NULL pointer is passed, no operation is performed. */
 ZSTDLIB_API size_t      ZSTD_freeDDict(ZSTD_DDict* ddict);
 
 /*! ZSTD_decompress_usingDDict() :
@@ -866,19 +897,25 @@ ZSTDLIB_API size_t ZSTD_decompress_usingDDict(ZSTD_DCtx* dctx,
  *  Dictionary helper functions
  *******************************/
 
-/*! ZSTD_getDictID_fromDict() :
+/*! ZSTD_getDictID_fromDict() : Requires v1.4.0+
  *  Provides the dictID stored within dictionary.
  *  if @return == 0, the dictionary is not conformant with Zstandard specification.
  *  It can still be loaded, but as a content-only dictionary. */
 ZSTDLIB_API unsigned ZSTD_getDictID_fromDict(const void* dict, size_t dictSize);
 
-/*! ZSTD_getDictID_fromDDict() :
+/*! ZSTD_getDictID_fromCDict() : Requires v1.5.0+
+ *  Provides the dictID of the dictionary loaded into `cdict`.
+ *  If @return == 0, the dictionary is not conformant to Zstandard specification, or empty.
+ *  Non-conformant dictionaries can still be loaded, but as content-only dictionaries. */
+ZSTDLIB_API unsigned ZSTD_getDictID_fromCDict(const ZSTD_CDict* cdict);
+
+/*! ZSTD_getDictID_fromDDict() : Requires v1.4.0+
  *  Provides the dictID of the dictionary loaded into `ddict`.
  *  If @return == 0, the dictionary is not conformant to Zstandard specification, or empty.
  *  Non-conformant dictionaries can still be loaded, but as content-only dictionaries. */
 ZSTDLIB_API unsigned ZSTD_getDictID_fromDDict(const ZSTD_DDict* ddict);
 
-/*! ZSTD_getDictID_fromFrame() :
+/*! ZSTD_getDictID_fromFrame() : Requires v1.4.0+
  *  Provides the dictID required to decompressed the frame stored within `src`.
  *  If @return == 0, the dictID could not be decoded.
  *  This could for one of the following reasons :
@@ -892,7 +929,7 @@ ZSTDLIB_API unsigned ZSTD_getDictID_fromFrame(const void* src, size_t srcSize);
 
 
 /*******************************************************************************
- * Advanced dictionary and prefix API
+ * Advanced dictionary and prefix API (Requires v1.4.0+)
  *
  * This API allows dictionaries to be used with ZSTD_compress2(),
  * ZSTD_compressStream2(), and ZSTD_decompress(). Dictionaries are sticky, and
@@ -901,7 +938,7 @@ ZSTDLIB_API unsigned ZSTD_getDictID_fromFrame(const void* src, size_t srcSize);
  ******************************************************************************/
 
 
-/*! ZSTD_CCtx_loadDictionary() :
+/*! ZSTD_CCtx_loadDictionary() : Requires v1.4.0+
  *  Create an internal CDict from `dict` buffer.
  *  Decompression will have to use same dictionary.
  * @result : 0, or an error code (which can be tested with ZSTD_isError()).
@@ -920,11 +957,11 @@ ZSTDLIB_API unsigned ZSTD_getDictID_fromFrame(const void* src, size_t srcSize);
  *           to precisely select how dictionary content must be interpreted. */
 ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary(ZSTD_CCtx* cctx, const void* dict, size_t dictSize);
 
-/*! ZSTD_CCtx_refCDict() :
+/*! ZSTD_CCtx_refCDict() : Requires v1.4.0+
  *  Reference a prepared dictionary, to be used for all next compressed frames.
  *  Note that compression parameters are enforced from within CDict,
  *  and supersede any compression parameter previously set within CCtx.
- *  The parameters ignored are labled as "superseded-by-cdict" in the ZSTD_cParameter enum docs.
+ *  The parameters ignored are labelled as "superseded-by-cdict" in the ZSTD_cParameter enum docs.
  *  The ignored parameters will be used again if the CCtx is returned to no-dictionary mode.
  *  The dictionary will remain valid for future compressed frames using same CCtx.
  * @result : 0, or an error code (which can be tested with ZSTD_isError()).
@@ -934,7 +971,7 @@ ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary(ZSTD_CCtx* cctx, const void* dict, s
  *  Note 2 : CDict is just referenced, its lifetime must outlive its usage within CCtx. */
 ZSTDLIB_API size_t ZSTD_CCtx_refCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict);
 
-/*! ZSTD_CCtx_refPrefix() :
+/*! ZSTD_CCtx_refPrefix() : Requires v1.4.0+
  *  Reference a prefix (single-usage dictionary) for next compressed frame.
  *  A prefix is **only used once**. Tables are discarded at end of frame (ZSTD_e_end).
  *  Decompression will need same prefix to properly regenerate data.
@@ -955,7 +992,7 @@ ZSTDLIB_API size_t ZSTD_CCtx_refCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict);
 ZSTDLIB_API size_t ZSTD_CCtx_refPrefix(ZSTD_CCtx* cctx,
                                  const void* prefix, size_t prefixSize);
 
-/*! ZSTD_DCtx_loadDictionary() :
+/*! ZSTD_DCtx_loadDictionary() : Requires v1.4.0+
  *  Create an internal DDict from dict buffer,
  *  to be used to decompress next frames.
  *  The dictionary remains valid for all future frames, until explicitly invalidated.
@@ -972,9 +1009,16 @@ ZSTDLIB_API size_t ZSTD_CCtx_refPrefix(ZSTD_CCtx* cctx,
  */
 ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary(ZSTD_DCtx* dctx, const void* dict, size_t dictSize);
 
-/*! ZSTD_DCtx_refDDict() :
+/*! ZSTD_DCtx_refDDict() : Requires v1.4.0+
  *  Reference a prepared dictionary, to be used to decompress next frames.
  *  The dictionary remains active for decompression of future frames using same DCtx.
+ *
+ *  If called with ZSTD_d_refMultipleDDicts enabled, repeated calls of this function
+ *  will store the DDict references in a table, and the DDict used for decompression
+ *  will be determined at decompression time, as per the dict ID in the frame.
+ *  The memory for the table is allocated on the first call to refDDict, and can be
+ *  freed with ZSTD_freeDCtx().
+ *
  * @result : 0, or an error code (which can be tested with ZSTD_isError()).
  *  Note 1 : Currently, only one dictionary can be managed.
  *           Referencing a new dictionary effectively "discards" any previous one.
@@ -983,7 +1027,7 @@ ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary(ZSTD_DCtx* dctx, const void* dict, s
  */
 ZSTDLIB_API size_t ZSTD_DCtx_refDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict);
 
-/*! ZSTD_DCtx_refPrefix() :
+/*! ZSTD_DCtx_refPrefix() : Requires v1.4.0+
  *  Reference a prefix (single-usage dictionary) to decompress next frame.
  *  This is the reverse operation of ZSTD_CCtx_refPrefix(),
  *  and must use the same prefix as the one used during compression.
@@ -1004,7 +1048,7 @@ ZSTDLIB_API size_t ZSTD_DCtx_refPrefix(ZSTD_DCtx* dctx,
 
 /* ===   Memory management   === */
 
-/*! ZSTD_sizeof_*() :
+/*! ZSTD_sizeof_*() : Requires v1.4.0+
  *  These functions give the _current_ memory usage of selected object.
  *  Note that object memory usage can evolve (increase or decrease) over time. */
 ZSTDLIB_API size_t ZSTD_sizeof_CCtx(const ZSTD_CCtx* cctx);
@@ -1029,6 +1073,28 @@ ZSTDLIB_API size_t ZSTD_sizeof_DDict(const ZSTD_DDict* ddict);
 #if defined(ZSTD_STATIC_LINKING_ONLY) && !defined(ZSTD_H_ZSTD_STATIC_LINKING_ONLY)
 #define ZSTD_H_ZSTD_STATIC_LINKING_ONLY
 
+/* Deprecation warnings :
+ * Should these warnings be a problem, it is generally possible to disable them,
+ * typically with -Wno-deprecated-declarations for gcc or _CRT_SECURE_NO_WARNINGS in Visual.
+ * Otherwise, it's also possible to define ZSTD_DISABLE_DEPRECATE_WARNINGS.
+ */
+#ifdef ZSTD_DISABLE_DEPRECATE_WARNINGS
+#  define ZSTD_DEPRECATED(message) ZSTDLIB_API  /* disable deprecation warnings */
+#else
+#  if defined (__cplusplus) && (__cplusplus >= 201402) /* C++14 or greater */
+#    define ZSTD_DEPRECATED(message) [[deprecated(message)]] ZSTDLIB_API
+#  elif (defined(GNUC) && (GNUC > 4 || (GNUC == 4 && GNUC_MINOR >= 5))) || defined(__clang__)
+#    define ZSTD_DEPRECATED(message) ZSTDLIB_API __attribute__((deprecated(message)))
+#  elif defined(__GNUC__) && (__GNUC__ >= 3)
+#    define ZSTD_DEPRECATED(message) ZSTDLIB_API __attribute__((deprecated))
+#  elif defined(_MSC_VER)
+#    define ZSTD_DEPRECATED(message) ZSTDLIB_API __declspec(deprecated(message))
+#  else
+#    pragma message("WARNING: You need to implement ZSTD_DEPRECATED for this compiler")
+#    define ZSTD_DEPRECATED(message) ZSTDLIB_API
+#  endif
+#endif /* ZSTD_DISABLE_DEPRECATE_WARNINGS */
+
 /****************************************************************************************
  *   experimental API (static linking only)
  ****************************************************************************************
@@ -1100,21 +1166,40 @@ ZSTDLIB_API size_t ZSTD_sizeof_DDict(const ZSTD_DDict* ddict);
 typedef struct ZSTD_CCtx_params_s ZSTD_CCtx_params;
 
 typedef struct {
-    unsigned int matchPos; /* Match pos in dst */
-    /* If seqDef.offset > 3, then this is seqDef.offset - 3
-     * If seqDef.offset < 3, then this is the corresponding repeat offset
-     * But if seqDef.offset < 3 and litLength == 0, this is the
-     *   repeat offset before the corresponding repeat offset
-     * And if seqDef.offset == 3 and litLength == 0, this is the
-     *   most recent repeat offset - 1
-     */
-    unsigned int offset;
-    unsigned int litLength; /* Literal length */
-    unsigned int matchLength; /* Match length */
-    /* 0 when seq not rep and seqDef.offset otherwise
-     * when litLength == 0 this will be <= 4, otherwise <= 3 like normal
-     */
-    unsigned int rep;
+    unsigned int offset;      /* The offset of the match. (NOT the same as the offset code)
+                               * If offset == 0 and matchLength == 0, this sequence represents the last
+                               * literals in the block of litLength size.
+                               */
+
+    unsigned int litLength;   /* Literal length of the sequence. */
+    unsigned int matchLength; /* Match length of the sequence. */
+
+                              /* Note: Users of this API may provide a sequence with matchLength == litLength == offset == 0.
+                               * In this case, we will treat the sequence as a marker for a block boundary.
+                               */
+
+    unsigned int rep;         /* Represents which repeat offset is represented by the field 'offset'.
+                               * Ranges from [0, 3].
+                               *
+                               * Repeat offsets are essentially previous offsets from previous sequences sorted in
+                               * recency order. For more detail, see doc/zstd_compression_format.md
+                               *
+                               * If rep == 0, then 'offset' does not contain a repeat offset.
+                               * If rep > 0:
+                               *  If litLength != 0:
+                               *      rep == 1 --> offset == repeat_offset_1
+                               *      rep == 2 --> offset == repeat_offset_2
+                               *      rep == 3 --> offset == repeat_offset_3
+                               *  If litLength == 0:
+                               *      rep == 1 --> offset == repeat_offset_2
+                               *      rep == 2 --> offset == repeat_offset_3
+                               *      rep == 3 --> offset == repeat_offset_1 - 1
+                               *
+                               * Note: This field is optional. ZSTD_generateSequences() will calculate the value of
+                               * 'rep', but repeat offsets do not necessarily need to be calculated from an external
+                               * sequence provider's perspective. For example, ZSTD_compressSequences() does not
+                               * use this 'rep' field at all (as of now).
+                               */
 } ZSTD_Sequence;
 
 typedef struct {
@@ -1156,6 +1241,18 @@ typedef enum {
                                  * Decoder cannot recognise automatically this format, requiring this instruction. */
 } ZSTD_format_e;
 
+typedef enum {
+    /* Note: this enum controls ZSTD_d_forceIgnoreChecksum */
+    ZSTD_d_validateChecksum = 0,
+    ZSTD_d_ignoreChecksum = 1
+} ZSTD_forceIgnoreChecksum_e;
+
+typedef enum {
+    /* Note: this enum controls ZSTD_d_refMultipleDDicts */
+    ZSTD_rmd_refSingleDDict = 0,
+    ZSTD_rmd_refMultipleDDicts = 1
+} ZSTD_refMultipleDDicts_e;
+
 typedef enum {
     /* Note: this enum and the behavior it controls are effectively internal
      * implementation details of the compressor. They are expected to continue
@@ -1204,6 +1301,11 @@ typedef enum {
   ZSTD_lcm_uncompressed = 2   /**< Always emit uncompressed literals. */
 } ZSTD_literalCompressionMode_e;
 
+typedef enum {
+  ZSTD_urm_auto = 0,                   /* Automatically determine whether or not we use row matchfinder */
+  ZSTD_urm_disableRowMatchFinder = 1,  /* Never use row matchfinder */
+  ZSTD_urm_enableRowMatchFinder = 2    /* Always use row matchfinder when applicable */
+} ZSTD_useRowMatchFinderMode_e;
 
 /***************************************
 *  Frame size functions
@@ -1237,7 +1339,7 @@ ZSTDLIB_API unsigned long long ZSTD_findDecompressedSize(const void* src, size_t
  *  `srcSize` must be the _exact_ size of this series
  *       (i.e. there should be a frame boundary at `src + srcSize`)
  *  @return : - upper-bound for the decompressed size of all data in all successive frames
- *            - if an error occured: ZSTD_CONTENTSIZE_ERROR
+ *            - if an error occurred: ZSTD_CONTENTSIZE_ERROR
  *
  *  note 1  : an error can occur if `src` contains an invalid or incorrectly formatted frame.
  *  note 2  : the upper-bound is exact when the decompressed size field is available in every ZSTD encoded frame of `src`.
@@ -1253,14 +1355,91 @@ ZSTDLIB_API unsigned long long ZSTD_decompressBound(const void* src, size_t srcS
  *           or an error code (if srcSize is too small) */
 ZSTDLIB_API size_t ZSTD_frameHeaderSize(const void* src, size_t srcSize);
 
-/*! ZSTD_getSequences() :
- * Extract sequences from the sequence store
+typedef enum {
+  ZSTD_sf_noBlockDelimiters = 0,         /* Representation of ZSTD_Sequence has no block delimiters, sequences only */
+  ZSTD_sf_explicitBlockDelimiters = 1    /* Representation of ZSTD_Sequence contains explicit block delimiters */
+} ZSTD_sequenceFormat_e;
+
+/*! ZSTD_generateSequences() :
+ * Generate sequences using ZSTD_compress2, given a source buffer.
+ *
+ * Each block will end with a dummy sequence
+ * with offset == 0, matchLength == 0, and litLength == length of last literals.
+ * litLength may be == 0, and if so, then the sequence of (of: 0 ml: 0 ll: 0)
+ * simply acts as a block delimiter.
+ *
  * zc can be used to insert custom compression params.
  * This function invokes ZSTD_compress2
- * @return : number of sequences extracted
+ *
+ * The output of this function can be fed into ZSTD_compressSequences() with CCtx
+ * setting of ZSTD_c_blockDelimiters as ZSTD_sf_explicitBlockDelimiters
+ * @return : number of sequences generated
+ */
+
+ZSTDLIB_API size_t ZSTD_generateSequences(ZSTD_CCtx* zc, ZSTD_Sequence* outSeqs,
+                                          size_t outSeqsSize, const void* src, size_t srcSize);
+
+/*! ZSTD_mergeBlockDelimiters() :
+ * Given an array of ZSTD_Sequence, remove all sequences that represent block delimiters/last literals
+ * by merging them into into the literals of the next sequence.
+ *
+ * As such, the final generated result has no explicit representation of block boundaries,
+ * and the final last literals segment is not represented in the sequences.
+ *
+ * The output of this function can be fed into ZSTD_compressSequences() with CCtx
+ * setting of ZSTD_c_blockDelimiters as ZSTD_sf_noBlockDelimiters
+ * @return : number of sequences left after merging
+ */
+ZSTDLIB_API size_t ZSTD_mergeBlockDelimiters(ZSTD_Sequence* sequences, size_t seqsSize);
+
+/*! ZSTD_compressSequences() :
+ * Compress an array of ZSTD_Sequence, generated from the original source buffer, into dst.
+ * If a dictionary is included, then the cctx should reference the dict. (see: ZSTD_CCtx_refCDict(), ZSTD_CCtx_loadDictionary(), etc.)
+ * The entire source is compressed into a single frame.
+ *
+ * The compression behavior changes based on cctx params. In particular:
+ *    If ZSTD_c_blockDelimiters == ZSTD_sf_noBlockDelimiters, the array of ZSTD_Sequence is expected to contain
+ *    no block delimiters (defined in ZSTD_Sequence). Block boundaries are roughly determined based on
+ *    the block size derived from the cctx, and sequences may be split. This is the default setting.
+ *
+ *    If ZSTD_c_blockDelimiters == ZSTD_sf_explicitBlockDelimiters, the array of ZSTD_Sequence is expected to contain
+ *    block delimiters (defined in ZSTD_Sequence). Behavior is undefined if no block delimiters are provided.
+ *
+ *    If ZSTD_c_validateSequences == 0, this function will blindly accept the sequences provided. Invalid sequences cause undefined
+ *    behavior. If ZSTD_c_validateSequences == 1, then if sequence is invalid (see doc/zstd_compression_format.md for
+ *    specifics regarding offset/matchlength requirements) then the function will bail out and return an error.
+ *
+ *    In addition to the two adjustable experimental params, there are other important cctx params.
+ *    - ZSTD_c_minMatch MUST be set as less than or equal to the smallest match generated by the match finder. It has a minimum value of ZSTD_MINMATCH_MIN.
+ *    - ZSTD_c_compressionLevel accordingly adjusts the strength of the entropy coder, as it would in typical compression.
+ *    - ZSTD_c_windowLog affects offset validation: this function will return an error at higher debug levels if a provided offset
+ *      is larger than what the spec allows for a given window log and dictionary (if present). See: doc/zstd_compression_format.md
+ *
+ * Note: Repcodes are, as of now, always re-calculated within this function, so ZSTD_Sequence::rep is unused.
+ * Note 2: Once we integrate ability to ingest repcodes, the explicit block delims mode must respect those repcodes exactly,
+ *         and cannot emit an RLE block that disagrees with the repcode history
+ * @return : final compressed size or a ZSTD error.
  */
-ZSTDLIB_API size_t ZSTD_getSequences(ZSTD_CCtx* zc, ZSTD_Sequence* outSeqs,
-    size_t outSeqsSize, const void* src, size_t srcSize);
+ZSTDLIB_API size_t ZSTD_compressSequences(ZSTD_CCtx* const cctx, void* dst, size_t dstSize,
+                                  const ZSTD_Sequence* inSeqs, size_t inSeqsSize,
+                                  const void* src, size_t srcSize);
+
+
+/*! ZSTD_writeSkippableFrame() :
+ * Generates a zstd skippable frame containing data given by src, and writes it to dst buffer.
+ *
+ * Skippable frames begin with a a 4-byte magic number. There are 16 possible choices of magic number,
+ * ranging from ZSTD_MAGIC_SKIPPABLE_START to ZSTD_MAGIC_SKIPPABLE_START+15.
+ * As such, the parameter magicVariant controls the exact skippable frame magic number variant used, so
+ * the magic number used will be ZSTD_MAGIC_SKIPPABLE_START + magicVariant.
+ *
+ * Returns an error if destination buffer is not large enough, if the source size is not representable
+ * with a 4-byte unsigned int, or if the parameter magicVariant is greater than 15 (and therefore invalid).
+ *
+ * @return : number of bytes written or a ZSTD error.
+ */
+ZSTDLIB_API size_t ZSTD_writeSkippableFrame(void* dst, size_t dstCapacity,
+                                            const void* src, size_t srcSize, unsigned magicVariant);
 
 
 /***************************************
@@ -1372,7 +1551,11 @@ ZSTDLIB_API const ZSTD_DDict* ZSTD_initStaticDDict(
 typedef void* (*ZSTD_allocFunction) (void* opaque, size_t size);
 typedef void  (*ZSTD_freeFunction) (void* opaque, void* address);
 typedef struct { ZSTD_allocFunction customAlloc; ZSTD_freeFunction customFree; void* opaque; } ZSTD_customMem;
-static ZSTD_customMem const ZSTD_defaultCMem = { NULL, NULL, NULL };  /**< this constant defers to stdlib's functions */
+static
+#ifdef __GNUC__
+__attribute__((__unused__))
+#endif
+ZSTD_customMem const ZSTD_defaultCMem = { NULL, NULL, NULL };  /**< this constant defers to stdlib's functions */
 
 ZSTDLIB_API ZSTD_CCtx*    ZSTD_createCCtx_advanced(ZSTD_customMem customMem);
 ZSTDLIB_API ZSTD_CStream* ZSTD_createCStream_advanced(ZSTD_customMem customMem);
@@ -1385,12 +1568,38 @@ ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict_advanced(const void* dict, size_t dictS
                                                   ZSTD_compressionParameters cParams,
                                                   ZSTD_customMem customMem);
 
-ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict_advanced(const void* dict, size_t dictSize,
-                                                  ZSTD_dictLoadMethod_e dictLoadMethod,
-                                                  ZSTD_dictContentType_e dictContentType,
-                                                  ZSTD_customMem customMem);
+/* ! Thread pool :
+ * These prototypes make it possible to share a thread pool among multiple compression contexts.
+ * This can limit resources for applications with multiple threads where each one uses
+ * a threaded compression mode (via ZSTD_c_nbWorkers parameter).
+ * ZSTD_createThreadPool creates a new thread pool with a given number of threads.
+ * Note that the lifetime of such pool must exist while being used.
+ * ZSTD_CCtx_refThreadPool assigns a thread pool to a context (use NULL argument value
+ * to use an internal thread pool).
+ * ZSTD_freeThreadPool frees a thread pool, accepts NULL pointer.
+ */
+typedef struct POOL_ctx_s ZSTD_threadPool;
+ZSTDLIB_API ZSTD_threadPool* ZSTD_createThreadPool(size_t numThreads);
+ZSTDLIB_API void ZSTD_freeThreadPool (ZSTD_threadPool* pool);  /* accept NULL pointer */
+ZSTDLIB_API size_t ZSTD_CCtx_refThreadPool(ZSTD_CCtx* cctx, ZSTD_threadPool* pool);
 
 
+/*
+ * This API is temporary and is expected to change or disappear in the future!
+ */
+ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict_advanced2(
+    const void* dict, size_t dictSize,
+    ZSTD_dictLoadMethod_e dictLoadMethod,
+    ZSTD_dictContentType_e dictContentType,
+    const ZSTD_CCtx_params* cctxParams,
+    ZSTD_customMem customMem);
+
+ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict_advanced(
+    const void* dict, size_t dictSize,
+    ZSTD_dictLoadMethod_e dictLoadMethod,
+    ZSTD_dictContentType_e dictContentType,
+    ZSTD_customMem customMem);
+
 
 /***************************************
 *  Advanced compression functions
@@ -1430,18 +1639,20 @@ ZSTDLIB_API ZSTD_compressionParameters ZSTD_adjustCParams(ZSTD_compressionParame
 /*! ZSTD_compress_advanced() :
  *  Note : this function is now DEPRECATED.
  *         It can be replaced by ZSTD_compress2(), in combination with ZSTD_CCtx_setParameter() and other parameter setters.
- *  This prototype will be marked as deprecated and generate compilation warning on reaching v1.5.x */
-ZSTDLIB_API size_t ZSTD_compress_advanced(ZSTD_CCtx* cctx,
+ *  This prototype will generate compilation warnings. */
+ZSTD_DEPRECATED("use ZSTD_compress2")
+size_t ZSTD_compress_advanced(ZSTD_CCtx* cctx,
                                           void* dst, size_t dstCapacity,
                                     const void* src, size_t srcSize,
                                     const void* dict,size_t dictSize,
                                           ZSTD_parameters params);
 
 /*! ZSTD_compress_usingCDict_advanced() :
- *  Note : this function is now REDUNDANT.
+ *  Note : this function is now DEPRECATED.
  *         It can be replaced by ZSTD_compress2(), in combination with ZSTD_CCtx_loadDictionary() and other parameter setters.
- *  This prototype will be marked as deprecated and generate compilation warning in some future version */
-ZSTDLIB_API size_t ZSTD_compress_usingCDict_advanced(ZSTD_CCtx* cctx,
+ *  This prototype will generate compilation warnings. */
+ZSTD_DEPRECATED("use ZSTD_compress2 with ZSTD_CCtx_loadDictionary")
+size_t ZSTD_compress_usingCDict_advanced(ZSTD_CCtx* cctx,
                                               void* dst, size_t dstCapacity,
                                         const void* src, size_t srcSize,
                                         const ZSTD_CDict* cdict,
@@ -1503,7 +1714,7 @@ ZSTDLIB_API size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx, const void* pre
 
 /* Controls how the literals are compressed (default is auto).
  * The value must be of type ZSTD_literalCompressionMode_e.
- * See ZSTD_literalCompressionMode_t enum definition for details.
+ * See ZSTD_literalCompressionMode_e enum definition for details.
  */
 #define ZSTD_c_literalCompressionMode ZSTD_c_experimentalParam5
 
@@ -1518,12 +1729,189 @@ ZSTDLIB_API size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx, const void* pre
  * but compression ratio may regress significantly if guess considerably underestimates */
 #define ZSTD_c_srcSizeHint ZSTD_c_experimentalParam7
 
+/* Controls whether the new and experimental "dedicated dictionary search
+ * structure" can be used. This feature is still rough around the edges, be
+ * prepared for surprising behavior!
+ *
+ * How to use it:
+ *
+ * When using a CDict, whether to use this feature or not is controlled at
+ * CDict creation, and it must be set in a CCtxParams set passed into that
+ * construction (via ZSTD_createCDict_advanced2()). A compression will then
+ * use the feature or not based on how the CDict was constructed; the value of
+ * this param, set in the CCtx, will have no effect.
+ *
+ * However, when a dictionary buffer is passed into a CCtx, such as via
+ * ZSTD_CCtx_loadDictionary(), this param can be set on the CCtx to control
+ * whether the CDict that is created internally can use the feature or not.
+ *
+ * What it does:
+ *
+ * Normally, the internal data structures of the CDict are analogous to what
+ * would be stored in a CCtx after compressing the contents of a dictionary.
+ * To an approximation, a compression using a dictionary can then use those
+ * data structures to simply continue what is effectively a streaming
+ * compression where the simulated compression of the dictionary left off.
+ * Which is to say, the search structures in the CDict are normally the same
+ * format as in the CCtx.
+ *
+ * It is possible to do better, since the CDict is not like a CCtx: the search
+ * structures are written once during CDict creation, and then are only read
+ * after that, while the search structures in the CCtx are both read and
+ * written as the compression goes along. This means we can choose a search
+ * structure for the dictionary that is read-optimized.
+ *
+ * This feature enables the use of that different structure.
+ *
+ * Note that some of the members of the ZSTD_compressionParameters struct have
+ * different semantics and constraints in the dedicated search structure. It is
+ * highly recommended that you simply set a compression level in the CCtxParams
+ * you pass into the CDict creation call, and avoid messing with the cParams
+ * directly.
+ *
+ * Effects:
+ *
+ * This will only have any effect when the selected ZSTD_strategy
+ * implementation supports this feature. Currently, that's limited to
+ * ZSTD_greedy, ZSTD_lazy, and ZSTD_lazy2.
+ *
+ * Note that this means that the CDict tables can no longer be copied into the
+ * CCtx, so the dict attachment mode ZSTD_dictForceCopy will no longer be
+ * useable. The dictionary can only be attached or reloaded.
+ *
+ * In general, you should expect compression to be faster--sometimes very much
+ * so--and CDict creation to be slightly slower. Eventually, we will probably
+ * make this mode the default.
+ */
+#define ZSTD_c_enableDedicatedDictSearch ZSTD_c_experimentalParam8
+
+/* ZSTD_c_stableInBuffer
+ * Experimental parameter.
+ * Default is 0 == disabled. Set to 1 to enable.
+ *
+ * Tells the compressor that the ZSTD_inBuffer will ALWAYS be the same
+ * between calls, except for the modifications that zstd makes to pos (the
+ * caller must not modify pos). This is checked by the compressor, and
+ * compression will fail if it ever changes. This means the only flush
+ * mode that makes sense is ZSTD_e_end, so zstd will error if ZSTD_e_end
+ * is not used. The data in the ZSTD_inBuffer in the range [src, src + pos)
+ * MUST not be modified during compression or you will get data corruption.
+ *
+ * When this flag is enabled zstd won't allocate an input window buffer,
+ * because the user guarantees it can reference the ZSTD_inBuffer until
+ * the frame is complete. But, it will still allocate an output buffer
+ * large enough to fit a block (see ZSTD_c_stableOutBuffer). This will also
+ * avoid the memcpy() from the input buffer to the input window buffer.
+ *
+ * NOTE: ZSTD_compressStream2() will error if ZSTD_e_end is not used.
+ * That means this flag cannot be used with ZSTD_compressStream().
+ *
+ * NOTE: So long as the ZSTD_inBuffer always points to valid memory, using
+ * this flag is ALWAYS memory safe, and will never access out-of-bounds
+ * memory. However, compression WILL fail if you violate the preconditions.
+ *
+ * WARNING: The data in the ZSTD_inBuffer in the range [dst, dst + pos) MUST
+ * not be modified during compression or you will get data corruption. This
+ * is because zstd needs to reference data in the ZSTD_inBuffer to find
+ * matches. Normally zstd maintains its own window buffer for this purpose,
+ * but passing this flag tells zstd to use the user provided buffer.
+ */
+#define ZSTD_c_stableInBuffer ZSTD_c_experimentalParam9
+
+/* ZSTD_c_stableOutBuffer
+ * Experimental parameter.
+ * Default is 0 == disabled. Set to 1 to enable.
+ *
+ * Tells he compressor that the ZSTD_outBuffer will not be resized between
+ * calls. Specifically: (out.size - out.pos) will never grow. This gives the
+ * compressor the freedom to say: If the compressed data doesn't fit in the
+ * output buffer then return ZSTD_error_dstSizeTooSmall. This allows us to
+ * always decompress directly into the output buffer, instead of decompressing
+ * into an internal buffer and copying to the output buffer.
+ *
+ * When this flag is enabled zstd won't allocate an output buffer, because
+ * it can write directly to the ZSTD_outBuffer. It will still allocate the
+ * input window buffer (see ZSTD_c_stableInBuffer).
+ *
+ * Zstd will check that (out.size - out.pos) never grows and return an error
+ * if it does. While not strictly necessary, this should prevent surprises.
+ */
+#define ZSTD_c_stableOutBuffer ZSTD_c_experimentalParam10
+
+/* ZSTD_c_blockDelimiters
+ * Default is 0 == ZSTD_sf_noBlockDelimiters.
+ *
+ * For use with sequence compression API: ZSTD_compressSequences().
+ *
+ * Designates whether or not the given array of ZSTD_Sequence contains block delimiters
+ * and last literals, which are defined as sequences with offset == 0 and matchLength == 0.
+ * See the definition of ZSTD_Sequence for more specifics.
+ */
+#define ZSTD_c_blockDelimiters ZSTD_c_experimentalParam11
+
+/* ZSTD_c_validateSequences
+ * Default is 0 == disabled. Set to 1 to enable sequence validation.
+ *
+ * For use with sequence compression API: ZSTD_compressSequences().
+ * Designates whether or not we validate sequences provided to ZSTD_compressSequences()
+ * during function execution.
+ *
+ * Without validation, providing a sequence that does not conform to the zstd spec will cause
+ * undefined behavior, and may produce a corrupted block.
+ *
+ * With validation enabled, a if sequence is invalid (see doc/zstd_compression_format.md for
+ * specifics regarding offset/matchlength requirements) then the function will bail out and
+ * return an error.
+ *
+ */
+#define ZSTD_c_validateSequences ZSTD_c_experimentalParam12
+
+/* ZSTD_c_splitBlocks
+ * Default is 0 == disabled. Set to 1 to enable block splitting.
+ *
+ * Will attempt to split blocks in order to improve compression ratio at the cost of speed.
+ */
+#define ZSTD_c_splitBlocks ZSTD_c_experimentalParam13
+
+/* ZSTD_c_useRowMatchFinder
+ * Default is ZSTD_urm_auto.
+ * Controlled with ZSTD_useRowMatchFinderMode_e enum.
+ *
+ * By default, in ZSTD_urm_auto, when finalizing the compression parameters, the library
+ * will decide at runtime whether to use the row-based matchfinder based on support for SIMD
+ * instructions as well as the windowLog.
+ *
+ * Set to ZSTD_urm_disableRowMatchFinder to never use row-based matchfinder.
+ * Set to ZSTD_urm_enableRowMatchFinder to force usage of row-based matchfinder.
+ */
+#define ZSTD_c_useRowMatchFinder ZSTD_c_experimentalParam14
+
+/* ZSTD_c_deterministicRefPrefix
+ * Default is 0 == disabled. Set to 1 to enable.
+ *
+ * Zstd produces different results for prefix compression when the prefix is
+ * directly adjacent to the data about to be compressed vs. when it isn't.
+ * This is because zstd detects that the two buffers are contiguous and it can
+ * use a more efficient match finding algorithm. However, this produces different
+ * results than when the two buffers are non-contiguous. This flag forces zstd
+ * to always load the prefix in non-contiguous mode, even if it happens to be
+ * adjacent to the data, to guarantee determinism.
+ *
+ * If you really care about determinism when using a dictionary or prefix,
+ * like when doing delta compression, you should select this option. It comes
+ * at a speed penalty of about ~2.5% if the dictionary and data happened to be
+ * contiguous, and is free if they weren't contiguous. We don't expect that
+ * intentionally making the dictionary and data contiguous will be worth the
+ * cost to memcpy() the data.
+ */
+#define ZSTD_c_deterministicRefPrefix ZSTD_c_experimentalParam15
+
 /*! ZSTD_CCtx_getParameter() :
  *  Get the requested compression parameter value, selected by enum ZSTD_cParameter,
  *  and store it into int* value.
  * @return : 0, or an error code (which can be tested with ZSTD_isError()).
  */
-ZSTDLIB_API size_t ZSTD_CCtx_getParameter(ZSTD_CCtx* cctx, ZSTD_cParameter param, int* value);
+ZSTDLIB_API size_t ZSTD_CCtx_getParameter(const ZSTD_CCtx* cctx, ZSTD_cParameter param, int* value);
 
 
 /*! ZSTD_CCtx_params :
@@ -1538,13 +1926,13 @@ ZSTDLIB_API size_t ZSTD_CCtx_getParameter(ZSTD_CCtx* cctx, ZSTD_cParameter param
  *                                    These parameters will be applied to
  *                                    all subsequent frames.
  *  - ZSTD_compressStream2() : Do compression using the CCtx.
- *  - ZSTD_freeCCtxParams() : Free the memory.
+ *  - ZSTD_freeCCtxParams() : Free the memory, accept NULL pointer.
  *
  *  This can be used with ZSTD_estimateCCtxSize_advanced_usingCCtxParams()
  *  for static allocation of CCtx for single-threaded compression.
  */
 ZSTDLIB_API ZSTD_CCtx_params* ZSTD_createCCtxParams(void);
-ZSTDLIB_API size_t ZSTD_freeCCtxParams(ZSTD_CCtx_params* params);
+ZSTDLIB_API size_t ZSTD_freeCCtxParams(ZSTD_CCtx_params* params);  /* accept NULL pointer */
 
 /*! ZSTD_CCtxParams_reset() :
  *  Reset params to default values.
@@ -1563,11 +1951,13 @@ ZSTDLIB_API size_t ZSTD_CCtxParams_init(ZSTD_CCtx_params* cctxParams, int compre
  */
 ZSTDLIB_API size_t ZSTD_CCtxParams_init_advanced(ZSTD_CCtx_params* cctxParams, ZSTD_parameters params);
 
-/*! ZSTD_CCtxParams_setParameter() :
+/*! ZSTD_CCtxParams_setParameter() : Requires v1.4.0+
  *  Similar to ZSTD_CCtx_setParameter.
  *  Set one compression parameter, selected by enum ZSTD_cParameter.
- *  Parameters must be applied to a ZSTD_CCtx using ZSTD_CCtx_setParametersUsingCCtxParams().
- * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Parameters must be applied to a ZSTD_CCtx using
+ *  ZSTD_CCtx_setParametersUsingCCtxParams().
+ * @result : a code representing success or failure (which can be tested with
+ *           ZSTD_isError()).
  */
 ZSTDLIB_API size_t ZSTD_CCtxParams_setParameter(ZSTD_CCtx_params* params, ZSTD_cParameter param, int value);
 
@@ -1576,7 +1966,7 @@ ZSTDLIB_API size_t ZSTD_CCtxParams_setParameter(ZSTD_CCtx_params* params, ZSTD_c
  * Get the requested value of one compression parameter, selected by enum ZSTD_cParameter.
  * @result : 0, or an error code (which can be tested with ZSTD_isError()).
  */
-ZSTDLIB_API size_t ZSTD_CCtxParams_getParameter(ZSTD_CCtx_params* params, ZSTD_cParameter param, int* value);
+ZSTDLIB_API size_t ZSTD_CCtxParams_getParameter(const ZSTD_CCtx_params* params, ZSTD_cParameter param, int* value);
 
 /*! ZSTD_CCtx_setParametersUsingCCtxParams() :
  *  Apply a set of ZSTD_CCtx_params to the compression context.
@@ -1647,6 +2037,13 @@ ZSTDLIB_API size_t ZSTD_DCtx_refPrefix_advanced(ZSTD_DCtx* dctx, const void* pre
  */
 ZSTDLIB_API size_t ZSTD_DCtx_setMaxWindowSize(ZSTD_DCtx* dctx, size_t maxWindowSize);
 
+/*! ZSTD_DCtx_getParameter() :
+ *  Get the requested decompression parameter value, selected by enum ZSTD_dParameter,
+ *  and store it into int* value.
+ * @return : 0, or an error code (which can be tested with ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_getParameter(ZSTD_DCtx* dctx, ZSTD_dParameter param, int* value);
+
 /* ZSTD_d_format
  * experimental parameter,
  * allowing selection between ZSTD_format_e input compression formats
@@ -1684,12 +2081,49 @@ ZSTDLIB_API size_t ZSTD_DCtx_setMaxWindowSize(ZSTD_DCtx* dctx, size_t maxWindowS
  */
 #define ZSTD_d_stableOutBuffer ZSTD_d_experimentalParam2
 
+/* ZSTD_d_forceIgnoreChecksum
+ * Experimental parameter.
+ * Default is 0 == disabled. Set to 1 to enable
+ *
+ * Tells the decompressor to skip checksum validation during decompression, regardless
+ * of whether checksumming was specified during compression. This offers some
+ * slight performance benefits, and may be useful for debugging.
+ * Param has values of type ZSTD_forceIgnoreChecksum_e
+ */
+#define ZSTD_d_forceIgnoreChecksum ZSTD_d_experimentalParam3
+
+/* ZSTD_d_refMultipleDDicts
+ * Experimental parameter.
+ * Default is 0 == disabled. Set to 1 to enable
+ *
+ * If enabled and dctx is allocated on the heap, then additional memory will be allocated
+ * to store references to multiple ZSTD_DDict. That is, multiple calls of ZSTD_refDDict()
+ * using a given ZSTD_DCtx, rather than overwriting the previous DDict reference, will instead
+ * store all references. At decompression time, the appropriate dictID is selected
+ * from the set of DDicts based on the dictID in the frame.
+ *
+ * Usage is simply calling ZSTD_refDDict() on multiple dict buffers.
+ *
+ * Param has values of byte ZSTD_refMultipleDDicts_e
+ *
+ * WARNING: Enabling this parameter and calling ZSTD_DCtx_refDDict(), will trigger memory
+ * allocation for the hash table. ZSTD_freeDCtx() also frees this memory.
+ * Memory is allocated as per ZSTD_DCtx::customMem.
+ *
+ * Although this function allocates memory for the table, the user is still responsible for
+ * memory management of the underlying ZSTD_DDict* themselves.
+ */
+#define ZSTD_d_refMultipleDDicts ZSTD_d_experimentalParam4
+
+
 /*! ZSTD_DCtx_setFormat() :
+ *  This function is REDUNDANT. Prefer ZSTD_DCtx_setParameter().
  *  Instruct the decoder context about what kind of data to decode next.
  *  This instruction is mandatory to decode data without a fully-formed header,
  *  such ZSTD_f_zstd1_magicless for example.
  * @return : 0, or an error code (which can be tested using ZSTD_isError()). */
-ZSTDLIB_API size_t ZSTD_DCtx_setFormat(ZSTD_DCtx* dctx, ZSTD_format_e format);
+ZSTD_DEPRECATED("use ZSTD_DCtx_setParameter() instead")
+size_t ZSTD_DCtx_setFormat(ZSTD_DCtx* dctx, ZSTD_format_e format);
 
 /*! ZSTD_decompressStream_simpleArgs() :
  *  Same as ZSTD_decompressStream(),
@@ -1711,8 +2145,9 @@ ZSTDLIB_API size_t ZSTD_decompressStream_simpleArgs (
 ********************************************************************/
 
 /*=====   Advanced Streaming compression functions  =====*/
-/**! ZSTD_initCStream_srcSize() :
- * This function is deprecated, and equivalent to:
+
+/*! ZSTD_initCStream_srcSize() :
+ * This function is DEPRECATED, and equivalent to:
  *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
  *     ZSTD_CCtx_refCDict(zcs, NULL); // clear the dictionary (if any)
  *     ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel);
@@ -1721,15 +2156,15 @@ ZSTDLIB_API size_t ZSTD_decompressStream_simpleArgs (
  * pledgedSrcSize must be correct. If it is not known at init time, use
  * ZSTD_CONTENTSIZE_UNKNOWN. Note that, for compatibility with older programs,
  * "0" also disables frame content size field. It may be enabled in the future.
- * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x
+ * This prototype will generate compilation warnings.
  */
-ZSTDLIB_API size_t
-ZSTD_initCStream_srcSize(ZSTD_CStream* zcs,
+ZSTD_DEPRECATED("use ZSTD_CCtx_reset, see zstd.h for detailed instructions")
+size_t ZSTD_initCStream_srcSize(ZSTD_CStream* zcs,
                          int compressionLevel,
                          unsigned long long pledgedSrcSize);
 
-/**! ZSTD_initCStream_usingDict() :
- * This function is deprecated, and is equivalent to:
+/*! ZSTD_initCStream_usingDict() :
+ * This function is DEPRECATED, and is equivalent to:
  *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
  *     ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel);
  *     ZSTD_CCtx_loadDictionary(zcs, dict, dictSize);
@@ -1738,15 +2173,15 @@ ZSTD_initCStream_srcSize(ZSTD_CStream* zcs,
  * dict == NULL or dictSize < 8, in which case no dict is used.
  * Note: dict is loaded with ZSTD_dct_auto (treated as a full zstd dictionary if
  * it begins with ZSTD_MAGIC_DICTIONARY, else as raw content) and ZSTD_dlm_byCopy.
- * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x
+ * This prototype will generate compilation warnings.
  */
-ZSTDLIB_API size_t
-ZSTD_initCStream_usingDict(ZSTD_CStream* zcs,
+ZSTD_DEPRECATED("use ZSTD_CCtx_reset, see zstd.h for detailed instructions")
+size_t ZSTD_initCStream_usingDict(ZSTD_CStream* zcs,
                      const void* dict, size_t dictSize,
                            int compressionLevel);
 
-/**! ZSTD_initCStream_advanced() :
- * This function is deprecated, and is approximately equivalent to:
+/*! ZSTD_initCStream_advanced() :
+ * This function is DEPRECATED, and is approximately equivalent to:
  *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
  *     // Pseudocode: Set each zstd parameter and leave the rest as-is.
  *     for ((param, value) : params) {
@@ -1758,25 +2193,26 @@ ZSTD_initCStream_usingDict(ZSTD_CStream* zcs,
  * dict is loaded with ZSTD_dct_auto and ZSTD_dlm_byCopy.
  * pledgedSrcSize must be correct.
  * If srcSize is not known at init time, use value ZSTD_CONTENTSIZE_UNKNOWN.
- * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x
+ * This prototype will generate compilation warnings.
  */
-ZSTDLIB_API size_t
-ZSTD_initCStream_advanced(ZSTD_CStream* zcs,
+ZSTD_DEPRECATED("use ZSTD_CCtx_reset, see zstd.h for detailed instructions")
+size_t ZSTD_initCStream_advanced(ZSTD_CStream* zcs,
                     const void* dict, size_t dictSize,
                           ZSTD_parameters params,
                           unsigned long long pledgedSrcSize);
 
-/**! ZSTD_initCStream_usingCDict() :
- * This function is deprecated, and equivalent to:
+/*! ZSTD_initCStream_usingCDict() :
+ * This function is DEPRECATED, and equivalent to:
  *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
  *     ZSTD_CCtx_refCDict(zcs, cdict);
- *
+ * 
  * note : cdict will just be referenced, and must outlive compression session
- * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x
+ * This prototype will generate compilation warnings.
  */
-ZSTDLIB_API size_t ZSTD_initCStream_usingCDict(ZSTD_CStream* zcs, const ZSTD_CDict* cdict);
+ZSTD_DEPRECATED("use ZSTD_CCtx_reset and ZSTD_CCtx_refCDict, see zstd.h for detailed instructions")
+size_t ZSTD_initCStream_usingCDict(ZSTD_CStream* zcs, const ZSTD_CDict* cdict);
 
-/**! ZSTD_initCStream_usingCDict_advanced() :
+/*! ZSTD_initCStream_usingCDict_advanced() :
  *   This function is DEPRECATED, and is approximately equivalent to:
  *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
  *     // Pseudocode: Set each zstd frame parameter and leave the rest as-is.
@@ -1789,18 +2225,21 @@ ZSTDLIB_API size_t ZSTD_initCStream_usingCDict(ZSTD_CStream* zcs, const ZSTD_CDi
  * same as ZSTD_initCStream_usingCDict(), with control over frame parameters.
  * pledgedSrcSize must be correct. If srcSize is not known at init time, use
  * value ZSTD_CONTENTSIZE_UNKNOWN.
- * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x
+ * This prototype will generate compilation warnings.
  */
-ZSTDLIB_API size_t
-ZSTD_initCStream_usingCDict_advanced(ZSTD_CStream* zcs,
+ZSTD_DEPRECATED("use ZSTD_CCtx_reset and ZSTD_CCtx_refCDict, see zstd.h for detailed instructions")
+size_t ZSTD_initCStream_usingCDict_advanced(ZSTD_CStream* zcs,
                                const ZSTD_CDict* cdict,
                                      ZSTD_frameParameters fParams,
                                      unsigned long long pledgedSrcSize);
 
 /*! ZSTD_resetCStream() :
- * This function is deprecated, and is equivalent to:
+ * This function is DEPRECATED, and is equivalent to:
  *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
  *     ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize);
+ * Note: ZSTD_resetCStream() interprets pledgedSrcSize == 0 as ZSTD_CONTENTSIZE_UNKNOWN, but
+ *       ZSTD_CCtx_setPledgedSrcSize() does not do the same, so ZSTD_CONTENTSIZE_UNKNOWN must be
+ *       explicitly specified.
  *
  *  start a new frame, using same parameters from previous frame.
  *  This is typically useful to skip dictionary loading stage, since it will re-use it in-place.
@@ -1810,9 +2249,10 @@ ZSTD_initCStream_usingCDict_advanced(ZSTD_CStream* zcs,
  *  For the time being, pledgedSrcSize==0 is interpreted as "srcSize unknown" for compatibility with older programs,
  *  but it will change to mean "empty" in future version, so use macro ZSTD_CONTENTSIZE_UNKNOWN instead.
  * @return : 0, or an error code (which can be tested using ZSTD_isError())
- *  Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x
+ *  This prototype will generate compilation warnings.
  */
-ZSTDLIB_API size_t ZSTD_resetCStream(ZSTD_CStream* zcs, unsigned long long pledgedSrcSize);
+ZSTD_DEPRECATED("use ZSTD_CCtx_reset, see zstd.h for detailed instructions")
+size_t ZSTD_resetCStream(ZSTD_CStream* zcs, unsigned long long pledgedSrcSize);
 
 
 typedef struct {
@@ -1849,7 +2289,8 @@ ZSTDLIB_API size_t ZSTD_toFlushNow(ZSTD_CCtx* cctx);
 
 
 /*=====   Advanced Streaming decompression functions  =====*/
-/**
+
+/*!
  * This function is deprecated, and is equivalent to:
  *
  *     ZSTD_DCtx_reset(zds, ZSTD_reset_session_only);
@@ -1860,7 +2301,7 @@ ZSTDLIB_API size_t ZSTD_toFlushNow(ZSTD_CCtx* cctx);
  */
 ZSTDLIB_API size_t ZSTD_initDStream_usingDict(ZSTD_DStream* zds, const void* dict, size_t dictSize);
 
-/**
+/*!
  * This function is deprecated, and is equivalent to:
  *
  *     ZSTD_DCtx_reset(zds, ZSTD_reset_session_only);
@@ -1871,7 +2312,7 @@ ZSTDLIB_API size_t ZSTD_initDStream_usingDict(ZSTD_DStream* zds, const void* dic
  */
 ZSTDLIB_API size_t ZSTD_initDStream_usingDDict(ZSTD_DStream* zds, const ZSTD_DDict* ddict);
 
-/**
+/*!
  * This function is deprecated, and is equivalent to:
  *
  *     ZSTD_DCtx_reset(zds, ZSTD_reset_session_only);
@@ -1898,8 +2339,7 @@ ZSTDLIB_API size_t ZSTD_resetDStream(ZSTD_DStream* zds);
   ZSTD_CCtx object can be re-used multiple times within successive compression operations.
 
   Start by initializing a context.
-  Use ZSTD_compressBegin(), or ZSTD_compressBegin_usingDict() for dictionary compression,
-  or ZSTD_compressBegin_advanced(), for finer parameter control.
+  Use ZSTD_compressBegin(), or ZSTD_compressBegin_usingDict() for dictionary compression.
   It's also possible to duplicate a reference context which has already been initialized, using ZSTD_copyCCtx()
 
   Then, consume your input using ZSTD_compressContinue().
@@ -1924,16 +2364,18 @@ ZSTDLIB_API size_t ZSTD_resetDStream(ZSTD_DStream* zds);
 /*=====   Buffer-less streaming compression functions  =====*/
 ZSTDLIB_API size_t ZSTD_compressBegin(ZSTD_CCtx* cctx, int compressionLevel);
 ZSTDLIB_API size_t ZSTD_compressBegin_usingDict(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, int compressionLevel);
-ZSTDLIB_API size_t ZSTD_compressBegin_advanced(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, ZSTD_parameters params, unsigned long long pledgedSrcSize); /**< pledgedSrcSize : If srcSize is not known at init time, use ZSTD_CONTENTSIZE_UNKNOWN */
 ZSTDLIB_API size_t ZSTD_compressBegin_usingCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict); /**< note: fails if cdict==NULL */
-ZSTDLIB_API size_t ZSTD_compressBegin_usingCDict_advanced(ZSTD_CCtx* const cctx, const ZSTD_CDict* const cdict, ZSTD_frameParameters const fParams, unsigned long long const pledgedSrcSize);   /* compression parameters are already set within cdict. pledgedSrcSize must be correct. If srcSize is not known, use macro ZSTD_CONTENTSIZE_UNKNOWN */
 ZSTDLIB_API size_t ZSTD_copyCCtx(ZSTD_CCtx* cctx, const ZSTD_CCtx* preparedCCtx, unsigned long long pledgedSrcSize); /**<  note: if pledgedSrcSize is not known, use ZSTD_CONTENTSIZE_UNKNOWN */
 
 ZSTDLIB_API size_t ZSTD_compressContinue(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize);
 ZSTDLIB_API size_t ZSTD_compressEnd(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize);
 
-
-/*-
+/* The ZSTD_compressBegin_advanced() and ZSTD_compressBegin_usingCDict_advanced() are now DEPRECATED and will generate a compiler warning */
+ZSTD_DEPRECATED("use advanced API to access custom parameters")
+size_t ZSTD_compressBegin_advanced(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, ZSTD_parameters params, unsigned long long pledgedSrcSize); /**< pledgedSrcSize : If srcSize is not known at init time, use ZSTD_CONTENTSIZE_UNKNOWN */
+ZSTD_DEPRECATED("use advanced API to access custom parameters")
+size_t ZSTD_compressBegin_usingCDict_advanced(ZSTD_CCtx* const cctx, const ZSTD_CDict* const cdict, ZSTD_frameParameters const fParams, unsigned long long const pledgedSrcSize);   /* compression parameters are already set within cdict. pledgedSrcSize must be correct. If srcSize is not known, use macro ZSTD_CONTENTSIZE_UNKNOWN */
+/**
   Buffer-less streaming decompression (synchronous mode)
 
   A ZSTD_DCtx object is required to track streaming operations.