zstdlib 0.12.0-x86_64-darwin → 0.13.0-x86_64-darwin

data/ext/zstdlib_c/{zstd-1.5.5 → zstd-1.5.6}/lib/decompress/zstd_decompress_block.h

@@ -47,7 +47,7 @@ typedef enum {
  */
 size_t ZSTD_decompressBlock_internal(ZSTD_DCtx* dctx,
                                void* dst, size_t dstCapacity,
-                         const void* src, size_t srcSize, const int frame, const streaming_operation streaming);
+                         const void* src, size_t srcSize, const streaming_operation streaming);
 
 /* ZSTD_buildFSETable() :
  * generate FSE decoding table for one symbol (ll, ml or off)

data/ext/zstdlib_c/{zstd-1.5.5 → zstd-1.5.6}/lib/decompress/zstd_decompress_internal.h

@@ -153,6 +153,7 @@ struct ZSTD_DCtx_s
     size_t litSize;
     size_t rleSize;
     size_t staticSize;
+    int isFrameDecompression;
 #if DYNAMIC_BMI2 != 0
     int bmi2;                     /* == 1 if the CPU supports BMI2 and 0 otherwise. CPU support is determined dynamically once per context lifetime. */
 #endif
@@ -166,6 +167,7 @@ struct ZSTD_DCtx_s
     ZSTD_DDictHashSet* ddictSet;                    /* Hash set for multiple ddicts */
     ZSTD_refMultipleDDicts_e refMultipleDDicts;     /* User specified: if == 1, will allow references to multiple DDicts. Default == 0 (disabled) */
     int disableHufAsm;
+    int maxBlockSizeParam;
 
     /* streaming */
     ZSTD_dStreamStage streamStage;

data/ext/zstdlib_c/{zstd-1.5.5 → zstd-1.5.6}/lib/zstd.h

@@ -106,7 +106,7 @@ extern "C" {
 /*------   Version   ------*/
 #define ZSTD_VERSION_MAJOR    1
 #define ZSTD_VERSION_MINOR    5
-#define ZSTD_VERSION_RELEASE  5
+#define ZSTD_VERSION_RELEASE  6
 #define ZSTD_VERSION_NUMBER  (ZSTD_VERSION_MAJOR *100*100 + ZSTD_VERSION_MINOR *100 + ZSTD_VERSION_RELEASE)
 
 /*! ZSTD_versionNumber() :
@@ -228,7 +228,7 @@ ZSTDLIB_API size_t ZSTD_findFrameCompressedSize(const void* src, size_t srcSize)
  * for example to size a static array on stack.
  * Will produce constant value 0 if srcSize too large.
  */
-#define ZSTD_MAX_INPUT_SIZE ((sizeof(size_t)==8) ? 0xFF00FF00FF00FF00LLU : 0xFF00FF00U)
+#define ZSTD_MAX_INPUT_SIZE ((sizeof(size_t)==8) ? 0xFF00FF00FF00FF00ULL : 0xFF00FF00U)
 #define ZSTD_COMPRESSBOUND(srcSize)   (((size_t)(srcSize) >= ZSTD_MAX_INPUT_SIZE) ? 0 : (srcSize) + ((srcSize)>>8) + (((srcSize) < (128<<10)) ? (((128<<10) - (srcSize)) >> 11) /* margin, from 64 to 0 */ : 0))  /* this formula ensures that bound(A) + bound(B) <= bound(A+B) as long as A and B >= 128 KB */
 ZSTDLIB_API size_t ZSTD_compressBound(size_t srcSize); /*!< maximum compressed size in worst case single-pass scenario */
 /* ZSTD_isError() :
@@ -249,7 +249,7 @@ ZSTDLIB_API int         ZSTD_defaultCLevel(void);           /*!< default compres
 /*= Compression context
  *  When compressing many times,
  *  it is recommended to allocate a context just once,
- *  and re-use it for each successive compression operation.
+ *  and reuse it for each successive compression operation.
  *  This will make workload friendlier for system's memory.
  *  Note : re-using context is just a speed / resource optimization.
  *         It doesn't change the compression ratio, which remains identical.
@@ -262,9 +262,9 @@ ZSTDLIB_API size_t     ZSTD_freeCCtx(ZSTD_CCtx* cctx);  /* accept NULL pointer *
 
 /*! ZSTD_compressCCtx() :
  *  Same as ZSTD_compress(), using an explicit ZSTD_CCtx.
- *  Important : in order to behave similarly to `ZSTD_compress()`,
- *  this function compresses at requested compression level,
- *  __ignoring any other parameter__ .
+ *  Important : in order to mirror `ZSTD_compress()` behavior,
+ *  this function compresses at the requested compression level,
+ *  __ignoring any other advanced parameter__ .
  *  If any advanced parameter was set using the advanced API,
  *  they will all be reset. Only `compressionLevel` remains.
  */
@@ -276,7 +276,7 @@ ZSTDLIB_API size_t ZSTD_compressCCtx(ZSTD_CCtx* cctx,
 /*= Decompression context
  *  When decompressing many times,
  *  it is recommended to allocate a context only once,
- *  and re-use it for each successive compression operation.
+ *  and reuse it for each successive compression operation.
  *  This will make workload friendlier for system's memory.
  *  Use one context per thread for parallel execution. */
 typedef struct ZSTD_DCtx_s ZSTD_DCtx;
@@ -286,7 +286,7 @@ ZSTDLIB_API size_t     ZSTD_freeDCtx(ZSTD_DCtx* dctx);  /* accept NULL pointer *
 /*! ZSTD_decompressDCtx() :
  *  Same as ZSTD_decompress(),
  *  requires an allocated ZSTD_DCtx.
- *  Compatible with sticky parameters.
+ *  Compatible with sticky parameters (see below).
  */
 ZSTDLIB_API size_t ZSTD_decompressDCtx(ZSTD_DCtx* dctx,
                                        void* dst, size_t dstCapacity,
@@ -302,12 +302,12 @@ ZSTDLIB_API size_t ZSTD_decompressDCtx(ZSTD_DCtx* dctx,
  *   using ZSTD_CCtx_set*() functions.
  *   Pushed parameters are sticky : they are valid for next compressed frame, and any subsequent frame.
  *   "sticky" parameters are applicable to `ZSTD_compress2()` and `ZSTD_compressStream*()` !
- *   __They do not apply to "simple" one-shot variants such as ZSTD_compressCCtx()__ .
+ *   __They do not apply to one-shot variants such as ZSTD_compressCCtx()__ .
  *
  *   It's possible to reset all parameters to "default" using ZSTD_CCtx_reset().
  *
  *   This API supersedes all other "advanced" API entry points in the experimental section.
- *   In the future, we expect to remove from experimental API entry points which are redundant with this API.
+ *   In the future, we expect to remove API entry points from experimental which are redundant with this API.
  */
 
 
@@ -390,6 +390,19 @@ typedef enum {
                               * The higher the value of selected strategy, the more complex it is,
                               * resulting in stronger and slower compression.
                               * Special: value 0 means "use default strategy". */
+
+    ZSTD_c_targetCBlockSize=130, /* v1.5.6+
+                                  * Attempts to fit compressed block size into approximatively targetCBlockSize.
+                                  * Bound by ZSTD_TARGETCBLOCKSIZE_MIN and ZSTD_TARGETCBLOCKSIZE_MAX.
+                                  * Note that it's not a guarantee, just a convergence target (default:0).
+                                  * No target when targetCBlockSize == 0.
+                                  * This is helpful in low bandwidth streaming environments to improve end-to-end latency,
+                                  * when a client can make use of partial documents (a prominent example being Chrome).
+                                  * Note: this parameter is stable since v1.5.6.
+                                  * It was present as an experimental parameter in earlier versions,
+                                  * but it's not recommended using it with earlier library versions
+                                  * due to massive performance regressions.
+                                  */
     /* LDM mode parameters */
     ZSTD_c_enableLongDistanceMatching=160, /* Enable long distance matching.
                                      * This parameter is designed to improve compression ratio
@@ -469,7 +482,6 @@ typedef enum {
      * ZSTD_c_forceMaxWindow
      * ZSTD_c_forceAttachDict
      * ZSTD_c_literalCompressionMode
-     * ZSTD_c_targetCBlockSize
      * ZSTD_c_srcSizeHint
      * ZSTD_c_enableDedicatedDictSearch
      * ZSTD_c_stableInBuffer
@@ -490,7 +502,7 @@ typedef enum {
      ZSTD_c_experimentalParam3=1000,
      ZSTD_c_experimentalParam4=1001,
      ZSTD_c_experimentalParam5=1002,
-     ZSTD_c_experimentalParam6=1003,
+     /* was ZSTD_c_experimentalParam6=1003; is now ZSTD_c_targetCBlockSize */
      ZSTD_c_experimentalParam7=1004,
      ZSTD_c_experimentalParam8=1005,
      ZSTD_c_experimentalParam9=1006,
@@ -575,6 +587,7 @@ ZSTDLIB_API size_t ZSTD_CCtx_reset(ZSTD_CCtx* cctx, ZSTD_ResetDirective reset);
 
 /*! ZSTD_compress2() :
  *  Behave the same as ZSTD_compressCCtx(), but compression parameters are set using the advanced API.
+ *  (note that this entry point doesn't even expose a compression level parameter).
  *  ZSTD_compress2() always starts a new frame.
  *  Should cctx hold data from a previously unfinished frame, everything about it is forgotten.
  *  - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*()
@@ -618,6 +631,7 @@ typedef enum {
      * ZSTD_d_forceIgnoreChecksum
      * ZSTD_d_refMultipleDDicts
      * ZSTD_d_disableHuffmanAssembly
+     * ZSTD_d_maxBlockSize
      * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them.
      * note : never ever use experimentalParam? names directly
      */
@@ -625,7 +639,8 @@ typedef enum {
      ZSTD_d_experimentalParam2=1001,
      ZSTD_d_experimentalParam3=1002,
      ZSTD_d_experimentalParam4=1003,
-     ZSTD_d_experimentalParam5=1004
+     ZSTD_d_experimentalParam5=1004,
+     ZSTD_d_experimentalParam6=1005
 
 } ZSTD_dParameter;
 
@@ -680,14 +695,14 @@ typedef struct ZSTD_outBuffer_s {
 *  A ZSTD_CStream object is required to track streaming operation.
 *  Use ZSTD_createCStream() and ZSTD_freeCStream() to create/release resources.
 *  ZSTD_CStream objects can be reused multiple times on consecutive compression operations.
-*  It is recommended to re-use ZSTD_CStream since it will play nicer with system's memory, by re-using already allocated memory.
+*  It is recommended to reuse ZSTD_CStream since it will play nicer with system's memory, by re-using already allocated memory.
 *
 *  For parallel execution, use one separate ZSTD_CStream per thread.
 *
 *  note : since v1.3.0, ZSTD_CStream and ZSTD_CCtx are the same thing.
 *
 *  Parameters are sticky : when starting a new compression on the same context,
-*  it will re-use the same sticky parameters as previous compression session.
+*  it will reuse the same sticky parameters as previous compression session.
 *  When in doubt, it's recommended to fully initialize the context before usage.
 *  Use ZSTD_CCtx_reset() to reset the context and ZSTD_CCtx_setParameter(),
 *  ZSTD_CCtx_setPledgedSrcSize(), or ZSTD_CCtx_loadDictionary() and friends to
@@ -776,6 +791,11 @@ typedef enum {
  *            only ZSTD_e_end or ZSTD_e_flush operations are allowed.
  *            Before starting a new compression job, or changing compression parameters,
  *            it is required to fully flush internal buffers.
+ *  - note: if an operation ends with an error, it may leave @cctx in an undefined state.
+ *          Therefore, it's UB to invoke ZSTD_compressStream2() of ZSTD_compressStream() on such a state.
+ *          In order to be re-employed after an error, a state must be reset,
+ *          which can be done explicitly (ZSTD_CCtx_reset()),
+ *          or is sometimes implied by methods starting a new compression job (ZSTD_initCStream(), ZSTD_compressCCtx())
  */
 ZSTDLIB_API size_t ZSTD_compressStream2( ZSTD_CCtx* cctx,
                                          ZSTD_outBuffer* output,
@@ -835,7 +855,7 @@ ZSTDLIB_API size_t ZSTD_endStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output);
 *
 *  A ZSTD_DStream object is required to track streaming operations.
 *  Use ZSTD_createDStream() and ZSTD_freeDStream() to create/release resources.
-*  ZSTD_DStream objects can be re-used multiple times.
+*  ZSTD_DStream objects can be reused multiple times.
 *
 *  Use ZSTD_initDStream() to start a new decompression operation.
 * @return : recommended first input size
@@ -889,6 +909,12 @@ ZSTDLIB_API size_t ZSTD_initDStream(ZSTD_DStream* zds);
  * @return : 0 when a frame is completely decoded and fully flushed,
  *           or an error code, which can be tested using ZSTD_isError(),
  *           or any other value > 0, which means there is some decoding or flushing to do to complete current frame.
+ *
+ * Note: when an operation returns with an error code, the @zds state may be left in undefined state.
+ *       It's UB to invoke `ZSTD_decompressStream()` on such a state.
+ *       In order to re-use such a state, it must be first reset,
+ *       which can be done explicitly (`ZSTD_DCtx_reset()`),
+ *       or is implied for operations starting some new decompression job (`ZSTD_initDStream`, `ZSTD_decompressDCtx()`, `ZSTD_decompress_usingDict()`)
  */
 ZSTDLIB_API size_t ZSTD_decompressStream(ZSTD_DStream* zds, ZSTD_outBuffer* output, ZSTD_inBuffer* input);
 
@@ -1021,7 +1047,7 @@ ZSTDLIB_API unsigned ZSTD_getDictID_fromFrame(const void* src, size_t srcSize);
  *
  * This API allows dictionaries to be used with ZSTD_compress2(),
  * ZSTD_compressStream2(), and ZSTD_decompressDCtx().
- * Dictionaries are sticky, they remain valid when same context is re-used,
+ * Dictionaries are sticky, they remain valid when same context is reused,
  * they only reset when the context is reset
  * with ZSTD_reset_parameters or ZSTD_reset_session_and_parameters.
  * In contrast, Prefixes are single-use.
@@ -1239,7 +1265,7 @@ ZSTDLIB_API size_t ZSTD_sizeof_DDict(const ZSTD_DDict* ddict);
 #define ZSTD_LDM_HASHRATELOG_MAX (ZSTD_WINDOWLOG_MAX - ZSTD_HASHLOG_MIN)
 
 /* Advanced parameter bounds */
-#define ZSTD_TARGETCBLOCKSIZE_MIN   64
+#define ZSTD_TARGETCBLOCKSIZE_MIN   1340 /* suitable to fit into an ethernet / wifi / 4G transport frame */
 #define ZSTD_TARGETCBLOCKSIZE_MAX   ZSTD_BLOCKSIZE_MAX
 #define ZSTD_SRCSIZEHINT_MIN        0
 #define ZSTD_SRCSIZEHINT_MAX        INT_MAX
@@ -1527,25 +1553,38 @@ typedef enum {
 ZSTDLIB_STATIC_API size_t ZSTD_sequenceBound(size_t srcSize);
 
 /*! ZSTD_generateSequences() :
+ * WARNING: This function is meant for debugging and informational purposes ONLY!
+ * Its implementation is flawed, and it will be deleted in a future version.
+ * It is not guaranteed to succeed, as there are several cases where it will give
+ * up and fail. You should NOT use this function in production code.
+ *
+ * This function is deprecated, and will be removed in a future version.
+ *
  * Generate sequences using ZSTD_compress2(), given a source buffer.
  *
+ * @param zc The compression context to be used for ZSTD_compress2(). Set any
+ *           compression parameters you need on this context.
+ * @param outSeqs The output sequences buffer of size @p outSeqsSize
+ * @param outSeqsSize The size of the output sequences buffer.
+ *                    ZSTD_sequenceBound(srcSize) is an upper bound on the number
+ *                    of sequences that can be generated.
+ * @param src The source buffer to generate sequences from of size @p srcSize.
+ * @param srcSize The size of the source buffer.
+ *
  * Each block will end with a dummy sequence
  * with offset == 0, matchLength == 0, and litLength == length of last literals.
  * litLength may be == 0, and if so, then the sequence of (of: 0 ml: 0 ll: 0)
  * simply acts as a block delimiter.
  *
- * @zc can be used to insert custom compression params.
- * This function invokes ZSTD_compress2().
- *
- * The output of this function can be fed into ZSTD_compressSequences() with CCtx
- * setting of ZSTD_c_blockDelimiters as ZSTD_sf_explicitBlockDelimiters
- * @return : number of sequences generated
+ * @returns The number of sequences generated, necessarily less than
+ *          ZSTD_sequenceBound(srcSize), or an error code that can be checked
+ *          with ZSTD_isError().
  */
-
+ZSTD_DEPRECATED("For debugging only, will be replaced by ZSTD_extractSequences()")
 ZSTDLIB_STATIC_API size_t
-ZSTD_generateSequences( ZSTD_CCtx* zc,
-                        ZSTD_Sequence* outSeqs, size_t outSeqsSize,
-                        const void* src, size_t srcSize);
+ZSTD_generateSequences(ZSTD_CCtx* zc,
+                       ZSTD_Sequence* outSeqs, size_t outSeqsSize,
+                       const void* src, size_t srcSize);
 
 /*! ZSTD_mergeBlockDelimiters() :
  * Given an array of ZSTD_Sequence, remove all sequences that represent block delimiters/last literals
@@ -1640,56 +1679,59 @@ ZSTDLIB_API unsigned ZSTD_isSkippableFrame(const void* buffer, size_t size);
 /*! ZSTD_estimate*() :
  *  These functions make it possible to estimate memory usage
  *  of a future {D,C}Ctx, before its creation.
+ *  This is useful in combination with ZSTD_initStatic(),
+ *  which makes it possible to employ a static buffer for ZSTD_CCtx* state.
  *
  *  ZSTD_estimateCCtxSize() will provide a memory budget large enough
- *  for any compression level up to selected one.
- *  Note : Unlike ZSTD_estimateCStreamSize*(), this estimate
- *         does not include space for a window buffer.
- *         Therefore, the estimation is only guaranteed for single-shot compressions, not streaming.
+ *  to compress data of any size using one-shot compression ZSTD_compressCCtx() or ZSTD_compress2()
+ *  associated with any compression level up to max specified one.
  *  The estimate will assume the input may be arbitrarily large,
  *  which is the worst case.
  *
+ *  Note that the size estimation is specific for one-shot compression,
+ *  it is not valid for streaming (see ZSTD_estimateCStreamSize*())
+ *  nor other potential ways of using a ZSTD_CCtx* state.
+ *
  *  When srcSize can be bound by a known and rather "small" value,
- *  this fact can be used to provide a tighter estimation
- *  because the CCtx compression context will need less memory.
- *  This tighter estimation can be provided by more advanced functions
+ *  this knowledge can be used to provide a tighter budget estimation
+ *  because the ZSTD_CCtx* state will need less memory for small inputs.
+ *  This tighter estimation can be provided by employing more advanced functions
  *  ZSTD_estimateCCtxSize_usingCParams(), which can be used in tandem with ZSTD_getCParams(),
  *  and ZSTD_estimateCCtxSize_usingCCtxParams(), which can be used in tandem with ZSTD_CCtxParams_setParameter().
  *  Both can be used to estimate memory using custom compression parameters and arbitrary srcSize limits.
  *
  *  Note : only single-threaded compression is supported.
  *  ZSTD_estimateCCtxSize_usingCCtxParams() will return an error code if ZSTD_c_nbWorkers is >= 1.
- *
- *  Note 2 : ZSTD_estimateCCtxSize* functions are not compatible with the Block-Level Sequence Producer API at this time.
- *  Size estimates assume that no external sequence producer is registered.
  */
-ZSTDLIB_STATIC_API size_t ZSTD_estimateCCtxSize(int compressionLevel);
+ZSTDLIB_STATIC_API size_t ZSTD_estimateCCtxSize(int maxCompressionLevel);
 ZSTDLIB_STATIC_API size_t ZSTD_estimateCCtxSize_usingCParams(ZSTD_compressionParameters cParams);
 ZSTDLIB_STATIC_API size_t ZSTD_estimateCCtxSize_usingCCtxParams(const ZSTD_CCtx_params* params);
 ZSTDLIB_STATIC_API size_t ZSTD_estimateDCtxSize(void);
 
 /*! ZSTD_estimateCStreamSize() :
- *  ZSTD_estimateCStreamSize() will provide a budget large enough for any compression level up to selected one.
- *  It will also consider src size to be arbitrarily "large", which is worst case.
+ *  ZSTD_estimateCStreamSize() will provide a memory budget large enough for streaming compression
+ *  using any compression level up to the max specified one.
+ *  It will also consider src size to be arbitrarily "large", which is a worst case scenario.
  *  If srcSize is known to always be small, ZSTD_estimateCStreamSize_usingCParams() can provide a tighter estimation.
  *  ZSTD_estimateCStreamSize_usingCParams() can be used in tandem with ZSTD_getCParams() to create cParams from compressionLevel.
  *  ZSTD_estimateCStreamSize_usingCCtxParams() can be used in tandem with ZSTD_CCtxParams_setParameter(). Only single-threaded compression is supported. This function will return an error code if ZSTD_c_nbWorkers is >= 1.
  *  Note : CStream size estimation is only correct for single-threaded compression.
- *  ZSTD_DStream memory budget depends on window Size.
+ *  ZSTD_estimateCStreamSize_usingCCtxParams() will return an error code if ZSTD_c_nbWorkers is >= 1.
+ *  Note 2 : ZSTD_estimateCStreamSize* functions are not compatible with the Block-Level Sequence Producer API at this time.
+ *  Size estimates assume that no external sequence producer is registered.
+ *
+ *  ZSTD_DStream memory budget depends on frame's window Size.
  *  This information can be passed manually, using ZSTD_estimateDStreamSize,
  *  or deducted from a valid frame Header, using ZSTD_estimateDStreamSize_fromFrame();
+ *  Any frame requesting a window size larger than max specified one will be rejected.
  *  Note : if streaming is init with function ZSTD_init?Stream_usingDict(),
  *         an internal ?Dict will be created, which additional size is not estimated here.
  *         In this case, get total size by adding ZSTD_estimate?DictSize
- *  Note 2 : only single-threaded compression is supported.
- *  ZSTD_estimateCStreamSize_usingCCtxParams() will return an error code if ZSTD_c_nbWorkers is >= 1.
- *  Note 3 : ZSTD_estimateCStreamSize* functions are not compatible with the Block-Level Sequence Producer API at this time.
- *  Size estimates assume that no external sequence producer is registered.
  */
-ZSTDLIB_STATIC_API size_t ZSTD_estimateCStreamSize(int compressionLevel);
+ZSTDLIB_STATIC_API size_t ZSTD_estimateCStreamSize(int maxCompressionLevel);
 ZSTDLIB_STATIC_API size_t ZSTD_estimateCStreamSize_usingCParams(ZSTD_compressionParameters cParams);
 ZSTDLIB_STATIC_API size_t ZSTD_estimateCStreamSize_usingCCtxParams(const ZSTD_CCtx_params* params);
-ZSTDLIB_STATIC_API size_t ZSTD_estimateDStreamSize(size_t windowSize);
+ZSTDLIB_STATIC_API size_t ZSTD_estimateDStreamSize(size_t maxWindowSize);
 ZSTDLIB_STATIC_API size_t ZSTD_estimateDStreamSize_fromFrame(const void* src, size_t srcSize);
 
 /*! ZSTD_estimate?DictSize() :
@@ -1946,11 +1988,6 @@ ZSTDLIB_STATIC_API size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx, const vo
  */
 #define ZSTD_c_literalCompressionMode ZSTD_c_experimentalParam5
 
-/* Tries to fit compressed block size to be around targetCBlockSize.
- * No target when targetCBlockSize == 0.
- * There is no guarantee on compressed block size (default:0) */
-#define ZSTD_c_targetCBlockSize ZSTD_c_experimentalParam6
-
 /* User's best guess of source size.
  * Hint is not valid when srcSizeHint == 0.
  * There is no guarantee that hint is close to actual source size,
@@ -2430,6 +2467,22 @@ ZSTDLIB_STATIC_API size_t ZSTD_DCtx_getParameter(ZSTD_DCtx* dctx, ZSTD_dParamete
  */
 #define ZSTD_d_disableHuffmanAssembly ZSTD_d_experimentalParam5
 
+/* ZSTD_d_maxBlockSize
+ * Allowed values are between 1KB and ZSTD_BLOCKSIZE_MAX (128KB).
+ * The default is ZSTD_BLOCKSIZE_MAX, and setting to 0 will set to the default.
+ *
+ * Forces the decompressor to reject blocks whose content size is
+ * larger than the configured maxBlockSize. When maxBlockSize is
+ * larger than the windowSize, the windowSize is used instead.
+ * This saves memory on the decoder when you know all blocks are small.
+ *
+ * This option is typically used in conjunction with ZSTD_c_maxBlockSize.
+ *
+ * WARNING: This causes the decoder to reject otherwise valid frames
+ * that have block sizes larger than the configured maxBlockSize.
+ */
+#define ZSTD_d_maxBlockSize ZSTD_d_experimentalParam6
+
 
 /*! ZSTD_DCtx_setFormat() :
  *  This function is REDUNDANT. Prefer ZSTD_DCtx_setParameter().
@@ -2557,7 +2610,7 @@ size_t ZSTD_initCStream_usingCDict_advanced(ZSTD_CStream* zcs,
  *       explicitly specified.
  *
  *  start a new frame, using same parameters from previous frame.
- *  This is typically useful to skip dictionary loading stage, since it will re-use it in-place.
+ *  This is typically useful to skip dictionary loading stage, since it will reuse it in-place.
  *  Note that zcs must be init at least once before using ZSTD_resetCStream().
  *  If pledgedSrcSize is not known at reset time, use macro ZSTD_CONTENTSIZE_UNKNOWN.
  *  If pledgedSrcSize > 0, its value must be correct, as it will be written in header, and controlled at the end.
@@ -2633,7 +2686,7 @@ ZSTDLIB_STATIC_API size_t ZSTD_initDStream_usingDDict(ZSTD_DStream* zds, const Z
  *
  *     ZSTD_DCtx_reset(zds, ZSTD_reset_session_only);
  *
- * re-use decompression parameters from previous init; saves dictionary loading
+ * reuse decompression parameters from previous init; saves dictionary loading
  */
 ZSTD_DEPRECATED("use ZSTD_DCtx_reset, see zstd.h for detailed instructions")
 ZSTDLIB_STATIC_API size_t ZSTD_resetDStream(ZSTD_DStream* zds);
@@ -2765,7 +2818,7 @@ ZSTDLIB_STATIC_API size_t ZSTD_resetDStream(ZSTD_DStream* zds);
 
 #define ZSTD_SEQUENCE_PRODUCER_ERROR ((size_t)(-1))
 
-typedef size_t ZSTD_sequenceProducer_F (
+typedef size_t (*ZSTD_sequenceProducer_F) (
   void* sequenceProducerState,
   ZSTD_Sequence* outSeqs, size_t outSeqsCapacity,
   const void* src, size_t srcSize,
@@ -2797,7 +2850,23 @@ ZSTDLIB_STATIC_API void
 ZSTD_registerSequenceProducer(
   ZSTD_CCtx* cctx,
   void* sequenceProducerState,
-  ZSTD_sequenceProducer_F* sequenceProducer
+  ZSTD_sequenceProducer_F sequenceProducer
+);
+
+/*! ZSTD_CCtxParams_registerSequenceProducer() :
+ * Same as ZSTD_registerSequenceProducer(), but operates on ZSTD_CCtx_params.
+ * This is used for accurate size estimation with ZSTD_estimateCCtxSize_usingCCtxParams(),
+ * which is needed when creating a ZSTD_CCtx with ZSTD_initStaticCCtx().
+ *
+ * If you are using the external sequence producer API in a scenario where ZSTD_initStaticCCtx()
+ * is required, then this function is for you. Otherwise, you probably don't need it.
+ *
+ * See tests/zstreamtest.c for example usage. */
+ZSTDLIB_STATIC_API void
+ZSTD_CCtxParams_registerSequenceProducer(
+  ZSTD_CCtx_params* params,
+  void* sequenceProducerState,
+  ZSTD_sequenceProducer_F sequenceProducer
 );
 
 
@@ -2820,7 +2889,7 @@ ZSTD_registerSequenceProducer(
 
   A ZSTD_CCtx object is required to track streaming operations.
   Use ZSTD_createCCtx() / ZSTD_freeCCtx() to manage resource.
-  ZSTD_CCtx object can be re-used multiple times within successive compression operations.
+  ZSTD_CCtx object can be reused multiple times within successive compression operations.
 
   Start by initializing a context.
   Use ZSTD_compressBegin(), or ZSTD_compressBegin_usingDict() for dictionary compression.
@@ -2841,7 +2910,7 @@ ZSTD_registerSequenceProducer(
   It's possible to use srcSize==0, in which case, it will write a final empty block to end the frame.
   Without last block mark, frames are considered unfinished (hence corrupted) by compliant decoders.
 
-  `ZSTD_CCtx` object can be re-used (ZSTD_compressBegin()) to compress again.
+  `ZSTD_CCtx` object can be reused (ZSTD_compressBegin()) to compress again.
 */
 
 /*=====   Buffer-less streaming compression functions  =====*/
@@ -2873,7 +2942,7 @@ size_t ZSTD_compressBegin_usingCDict_advanced(ZSTD_CCtx* const cctx, const ZSTD_
 
   A ZSTD_DCtx object is required to track streaming operations.
   Use ZSTD_createDCtx() / ZSTD_freeDCtx() to manage it.
-  A ZSTD_DCtx object can be re-used multiple times.
+  A ZSTD_DCtx object can be reused multiple times.
 
   First typical operation is to retrieve frame parameters, using ZSTD_getFrameHeader().
   Frame header is extracted from the beginning of compressed frame, so providing only the frame's beginning is enough.

data/ext/zstdlib_c/{zstd-1.5.5 → zstd-1.5.6}/zlibWrapper/gzclose.c

@@ -11,9 +11,7 @@
 /* gzclose() is in a separate file so that it is linked in only if it is used.
    That way the other gzclose functions can be used instead to avoid linking in
    unneeded compression or decompression routines. */
-int ZEXPORT gzclose(file)
-    gzFile file;
-{
+int ZEXPORT gzclose(gzFile file) {
 #ifndef NO_GZCOMPRESS
     gz_statep state;