zstdlib 0.10.0-x64-mingw32 → 0.12.0-x64-mingw32

data/ext/zstdlib_c/{zlib-1.2.12 → zlib-1.3.1}/deflate.h

@@ -1,5 +1,5 @@
 /* deflate.h -- internal compression state
- * Copyright (C) 1995-2018 Jean-loup Gailly
+ * Copyright (C) 1995-2024 Jean-loup Gailly
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -23,6 +23,10 @@
 #  define GZIP
 #endif
 
+/* define LIT_MEM to slightly increase the speed of deflate (order 1% to 2%) at
+   the cost of a larger memory footprint */
+/* #define LIT_MEM */
+
 /* ===========================================================================
  * Internal compression state.
  */
@@ -217,7 +221,14 @@ typedef struct internal_state {
     /* Depth of each subtree used as tie breaker for trees of equal frequency
      */
 
+#ifdef LIT_MEM
+#   define LIT_BUFS 5
+    ushf *d_buf;          /* buffer for distances */
+    uchf *l_buf;          /* buffer for literals/lengths */
+#else
+#   define LIT_BUFS 4
     uchf *sym_buf;        /* buffer for distances and literals/lengths */
+#endif
 
     uInt  lit_bufsize;
     /* Size of match buffer for literals/lengths.  There are 4 reasons for
@@ -239,7 +250,7 @@ typedef struct internal_state {
      *   - I can't count above 4
      */
 
-    uInt sym_next;      /* running index in sym_buf */
+    uInt sym_next;      /* running index in symbol buffer */
     uInt sym_end;       /* symbol table full when sym_next reaches this */
 
     ulg opt_len;        /* bit length of current block with optimal trees */
@@ -291,14 +302,14 @@ typedef struct internal_state {
    memory checker errors from longest match routines */
 
         /* in trees.c */
-void ZLIB_INTERNAL _tr_init OF((deflate_state *s));
-int ZLIB_INTERNAL _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
-void ZLIB_INTERNAL _tr_flush_block OF((deflate_state *s, charf *buf,
-                        ulg stored_len, int last));
-void ZLIB_INTERNAL _tr_flush_bits OF((deflate_state *s));
-void ZLIB_INTERNAL _tr_align OF((deflate_state *s));
-void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
-                        ulg stored_len, int last));
+void ZLIB_INTERNAL _tr_init(deflate_state *s);
+int ZLIB_INTERNAL _tr_tally(deflate_state *s, unsigned dist, unsigned lc);
+void ZLIB_INTERNAL _tr_flush_block(deflate_state *s, charf *buf,
+                                   ulg stored_len, int last);
+void ZLIB_INTERNAL _tr_flush_bits(deflate_state *s);
+void ZLIB_INTERNAL _tr_align(deflate_state *s);
+void ZLIB_INTERNAL _tr_stored_block(deflate_state *s, charf *buf,
+                                    ulg stored_len, int last);
 
 #define d_code(dist) \
    ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
@@ -318,6 +329,25 @@ void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
   extern const uch ZLIB_INTERNAL _dist_code[];
 #endif
 
+#ifdef LIT_MEM
+# define _tr_tally_lit(s, c, flush) \
+  { uch cc = (c); \
+    s->d_buf[s->sym_next] = 0; \
+    s->l_buf[s->sym_next++] = cc; \
+    s->dyn_ltree[cc].Freq++; \
+    flush = (s->sym_next == s->sym_end); \
+   }
+# define _tr_tally_dist(s, distance, length, flush) \
+  { uch len = (uch)(length); \
+    ush dist = (ush)(distance); \
+    s->d_buf[s->sym_next] = dist; \
+    s->l_buf[s->sym_next++] = len; \
+    dist--; \
+    s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
+    s->dyn_dtree[d_code(dist)].Freq++; \
+    flush = (s->sym_next == s->sym_end); \
+  }
+#else
 # define _tr_tally_lit(s, c, flush) \
   { uch cc = (c); \
     s->sym_buf[s->sym_next++] = 0; \
@@ -329,14 +359,15 @@ void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
 # define _tr_tally_dist(s, distance, length, flush) \
   { uch len = (uch)(length); \
     ush dist = (ush)(distance); \
-    s->sym_buf[s->sym_next++] = dist; \
-    s->sym_buf[s->sym_next++] = dist >> 8; \
+    s->sym_buf[s->sym_next++] = (uch)dist; \
+    s->sym_buf[s->sym_next++] = (uch)(dist >> 8); \
     s->sym_buf[s->sym_next++] = len; \
     dist--; \
     s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
     s->dyn_dtree[d_code(dist)].Freq++; \
     flush = (s->sym_next == s->sym_end); \
   }
+#endif
 #else
 # define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
 # define _tr_tally_dist(s, distance, length, flush) \

data/ext/zstdlib_c/{zlib-1.2.12 → zlib-1.3.1}/gzclose.c

@@ -8,9 +8,7 @@
 /* gzclose() is in a separate file so that it is linked in only if it is used.
    That way the other gzclose functions can be used instead to avoid linking in
    unneeded compression or decompression routines. */
-int ZEXPORT gzclose(file)
-    gzFile file;
-{
+int ZEXPORT gzclose(gzFile file) {
 #ifndef NO_GZCOMPRESS
     gz_statep state;
 

data/ext/zstdlib_c/{zlib-1.2.12 → zlib-1.3.1}/gzguts.h

@@ -1,5 +1,5 @@
 /* gzguts.h -- zlib internal header definitions for gz* operations
- * Copyright (C) 2004-2019 Mark Adler
+ * Copyright (C) 2004-2024 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -7,9 +7,8 @@
 #  ifndef _LARGEFILE_SOURCE
 #    define _LARGEFILE_SOURCE 1
 #  endif
-#  ifdef _FILE_OFFSET_BITS
-#    undef _FILE_OFFSET_BITS
-#  endif
+#  undef _FILE_OFFSET_BITS
+#  undef _TIME_BITS
 #endif
 
 #ifdef HAVE_HIDDEN
@@ -119,8 +118,8 @@
 
 /* gz* functions always use library allocation functions */
 #ifndef STDC
-  extern voidp  malloc OF((uInt size));
-  extern void   free   OF((voidpf ptr));
+  extern voidp  malloc(uInt size);
+  extern void   free(voidpf ptr);
 #endif
 
 /* get errno and strerror definition */
@@ -138,10 +137,10 @@
 
 /* provide prototypes for these when building zlib without LFS */
 #if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0
-    ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
-    ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
-    ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
-    ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
+    ZEXTERN gzFile ZEXPORT gzopen64(const char *, const char *);
+    ZEXTERN z_off64_t ZEXPORT gzseek64(gzFile, z_off64_t, int);
+    ZEXTERN z_off64_t ZEXPORT gztell64(gzFile);
+    ZEXTERN z_off64_t ZEXPORT gzoffset64(gzFile);
 #endif
 
 /* default memLevel */
@@ -203,17 +202,13 @@ typedef struct {
 typedef gz_state FAR *gz_statep;
 
 /* shared functions */
-void ZLIB_INTERNAL gz_error OF((gz_statep, int, const char *));
+void ZLIB_INTERNAL gz_error(gz_statep, int, const char *);
 #if defined UNDER_CE
-char ZLIB_INTERNAL *gz_strwinerror OF((DWORD error));
+char ZLIB_INTERNAL *gz_strwinerror(DWORD error);
 #endif
 
 /* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t
    value -- needed when comparing unsigned to z_off64_t, which is signed
    (possible z_off64_t types off_t, off64_t, and long are all signed) */
-#ifdef INT_MAX
-#  define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > INT_MAX)
-#else
-unsigned ZLIB_INTERNAL gz_intmax OF((void));
-#  define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax())
-#endif
+unsigned ZLIB_INTERNAL gz_intmax(void);
+#define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax())

data/ext/zstdlib_c/{zlib-1.2.12 → zlib-1.3.1}/gzlib.c

@@ -1,5 +1,5 @@
 /* gzlib.c -- zlib functions common to reading and writing gzip files
- * Copyright (C) 2004-2019 Mark Adler
+ * Copyright (C) 2004-2024 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -15,10 +15,6 @@
 #endif
 #endif
 
-/* Local functions */
-local void gz_reset OF((gz_statep));
-local gzFile gz_open OF((const void *, int, const char *));
-
 #if defined UNDER_CE
 
 /* Map the Windows error number in ERROR to a locale-dependent error message
@@ -30,9 +26,7 @@ local gzFile gz_open OF((const void *, int, const char *));
 
    The gz_strwinerror function does not change the current setting of
    GetLastError. */
-char ZLIB_INTERNAL *gz_strwinerror (error)
-     DWORD error;
-{
+char ZLIB_INTERNAL *gz_strwinerror(DWORD error) {
     static char buf[1024];
 
     wchar_t *msgbuf;
@@ -72,9 +66,7 @@ char ZLIB_INTERNAL *gz_strwinerror (error)
 #endif /* UNDER_CE */
 
 /* Reset gzip file state */
-local void gz_reset(state)
-    gz_statep state;
-{
+local void gz_reset(gz_statep state) {
     state->x.have = 0;              /* no output data available */
     if (state->mode == GZ_READ) {   /* for reading ... */
         state->eof = 0;             /* not at end of file */
@@ -90,11 +82,7 @@ local void gz_reset(state)
 }
 
 /* Open a gzip file either by name or file descriptor. */
-local gzFile gz_open(path, fd, mode)
-    const void *path;
-    int fd;
-    const char *mode;
-{
+local gzFile gz_open(const void *path, int fd, const char *mode) {
     gz_statep state;
     z_size_t len;
     int oflag;
@@ -269,26 +257,17 @@ local gzFile gz_open(path, fd, mode)
 }
 
 /* -- see zlib.h -- */
-gzFile ZEXPORT gzopen(path, mode)
-    const char *path;
-    const char *mode;
-{
+gzFile ZEXPORT gzopen(const char *path, const char *mode) {
     return gz_open(path, -1, mode);
 }
 
 /* -- see zlib.h -- */
-gzFile ZEXPORT gzopen64(path, mode)
-    const char *path;
-    const char *mode;
-{
+gzFile ZEXPORT gzopen64(const char *path, const char *mode) {
     return gz_open(path, -1, mode);
 }
 
 /* -- see zlib.h -- */
-gzFile ZEXPORT gzdopen(fd, mode)
-    int fd;
-    const char *mode;
-{
+gzFile ZEXPORT gzdopen(int fd, const char *mode) {
     char *path;         /* identifier for error messages */
     gzFile gz;
 
@@ -306,19 +285,13 @@ gzFile ZEXPORT gzdopen(fd, mode)
 
 /* -- see zlib.h -- */
 #ifdef WIDECHAR
-gzFile ZEXPORT gzopen_w(path, mode)
-    const wchar_t *path;
-    const char *mode;
-{
+gzFile ZEXPORT gzopen_w(const wchar_t *path, const char *mode) {
     return gz_open(path, -2, mode);
 }
 #endif
 
 /* -- see zlib.h -- */
-int ZEXPORT gzbuffer(file, size)
-    gzFile file;
-    unsigned size;
-{
+int ZEXPORT gzbuffer(gzFile file, unsigned size) {
     gz_statep state;
 
     /* get internal structure and check integrity */
@@ -335,16 +308,14 @@ int ZEXPORT gzbuffer(file, size)
     /* check and set requested size */
     if ((size << 1) < size)
         return -1;              /* need to be able to double it */
-    if (size < 2)
-        size = 2;               /* need two bytes to check magic header */
+    if (size < 8)
+        size = 8;               /* needed to behave well with flushing */
     state->want = size;
     return 0;
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzrewind(file)
-    gzFile file;
-{
+int ZEXPORT gzrewind(gzFile file) {
     gz_statep state;
 
     /* get internal structure */
@@ -365,11 +336,7 @@ int ZEXPORT gzrewind(file)
 }
 
 /* -- see zlib.h -- */
-z_off64_t ZEXPORT gzseek64(file, offset, whence)
-    gzFile file;
-    z_off64_t offset;
-    int whence;
-{
+z_off64_t ZEXPORT gzseek64(gzFile file, z_off64_t offset, int whence) {
     unsigned n;
     z_off64_t ret;
     gz_statep state;
@@ -442,11 +409,7 @@ z_off64_t ZEXPORT gzseek64(file, offset, whence)
 }
 
 /* -- see zlib.h -- */
-z_off_t ZEXPORT gzseek(file, offset, whence)
-    gzFile file;
-    z_off_t offset;
-    int whence;
-{
+z_off_t ZEXPORT gzseek(gzFile file, z_off_t offset, int whence) {
     z_off64_t ret;
 
     ret = gzseek64(file, (z_off64_t)offset, whence);
@@ -454,9 +417,7 @@ z_off_t ZEXPORT gzseek(file, offset, whence)
 }
 
 /* -- see zlib.h -- */
-z_off64_t ZEXPORT gztell64(file)
-    gzFile file;
-{
+z_off64_t ZEXPORT gztell64(gzFile file) {
     gz_statep state;
 
     /* get internal structure and check integrity */
@@ -471,9 +432,7 @@ z_off64_t ZEXPORT gztell64(file)
 }
 
 /* -- see zlib.h -- */
-z_off_t ZEXPORT gztell(file)
-    gzFile file;
-{
+z_off_t ZEXPORT gztell(gzFile file) {
     z_off64_t ret;
 
     ret = gztell64(file);
@@ -481,9 +440,7 @@ z_off_t ZEXPORT gztell(file)
 }
 
 /* -- see zlib.h -- */
-z_off64_t ZEXPORT gzoffset64(file)
-    gzFile file;
-{
+z_off64_t ZEXPORT gzoffset64(gzFile file) {
     z_off64_t offset;
     gz_statep state;
 
@@ -504,9 +461,7 @@ z_off64_t ZEXPORT gzoffset64(file)
 }
 
 /* -- see zlib.h -- */
-z_off_t ZEXPORT gzoffset(file)
-    gzFile file;
-{
+z_off_t ZEXPORT gzoffset(gzFile file) {
     z_off64_t ret;
 
     ret = gzoffset64(file);
@@ -514,9 +469,7 @@ z_off_t ZEXPORT gzoffset(file)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzeof(file)
-    gzFile file;
-{
+int ZEXPORT gzeof(gzFile file) {
     gz_statep state;
 
     /* get internal structure and check integrity */
@@ -531,10 +484,7 @@ int ZEXPORT gzeof(file)
 }
 
 /* -- see zlib.h -- */
-const char * ZEXPORT gzerror(file, errnum)
-    gzFile file;
-    int *errnum;
-{
+const char * ZEXPORT gzerror(gzFile file, int *errnum) {
     gz_statep state;
 
     /* get internal structure and check integrity */
@@ -552,9 +502,7 @@ const char * ZEXPORT gzerror(file, errnum)
 }
 
 /* -- see zlib.h -- */
-void ZEXPORT gzclearerr(file)
-    gzFile file;
-{
+void ZEXPORT gzclearerr(gzFile file) {
     gz_statep state;
 
     /* get internal structure and check integrity */
@@ -578,11 +526,7 @@ void ZEXPORT gzclearerr(file)
    memory).  Simply save the error message as a static string.  If there is an
    allocation failure constructing the error message, then convert the error to
    out of memory. */
-void ZLIB_INTERNAL gz_error(state, err, msg)
-    gz_statep state;
-    int err;
-    const char *msg;
-{
+void ZLIB_INTERNAL gz_error(gz_statep state, int err, const char *msg) {
     /* free previously allocated message and clear */
     if (state->msg != NULL) {
         if (state->err != Z_MEM_ERROR)
@@ -619,21 +563,20 @@ void ZLIB_INTERNAL gz_error(state, err, msg)
 #endif
 }
 
-#ifndef INT_MAX
 /* portably return maximum value for an int (when limits.h presumed not
    available) -- we need to do this to cover cases where 2's complement not
    used, since C standard permits 1's complement and sign-bit representations,
    otherwise we could just use ((unsigned)-1) >> 1 */
-unsigned ZLIB_INTERNAL gz_intmax()
-{
-    unsigned p, q;
-
-    p = 1;
+unsigned ZLIB_INTERNAL gz_intmax(void) {
+#ifdef INT_MAX
+    return INT_MAX;
+#else
+    unsigned p = 1, q;
     do {
         q = p;
         p <<= 1;
         p++;
     } while (p > q);
     return q >> 1;
-}
 #endif
+}

data/ext/zstdlib_c/{zlib-1.2.12 → zlib-1.3.1}/gzread.c

@@ -5,25 +5,12 @@
 
 #include "gzguts.h"
 
-/* Local functions */
-local int gz_load OF((gz_statep, unsigned char *, unsigned, unsigned *));
-local int gz_avail OF((gz_statep));
-local int gz_look OF((gz_statep));
-local int gz_decomp OF((gz_statep));
-local int gz_fetch OF((gz_statep));
-local int gz_skip OF((gz_statep, z_off64_t));
-local z_size_t gz_read OF((gz_statep, voidp, z_size_t));
-
 /* Use read() to load a buffer -- return -1 on error, otherwise 0.  Read from
    state->fd, and update state->eof, state->err, and state->msg as appropriate.
    This function needs to loop on read(), since read() is not guaranteed to
    read the number of bytes requested, depending on the type of descriptor. */
-local int gz_load(state, buf, len, have)
-    gz_statep state;
-    unsigned char *buf;
-    unsigned len;
-    unsigned *have;
-{
+local int gz_load(gz_statep state, unsigned char *buf, unsigned len,
+                  unsigned *have) {
     int ret;
     unsigned get, max = ((unsigned)-1 >> 2) + 1;
 
@@ -53,9 +40,7 @@ local int gz_load(state, buf, len, have)
    If strm->avail_in != 0, then the current data is moved to the beginning of
    the input buffer, and then the remainder of the buffer is loaded with the
    available data from the input file. */
-local int gz_avail(state)
-    gz_statep state;
-{
+local int gz_avail(gz_statep state) {
     unsigned got;
     z_streamp strm = &(state->strm);
 
@@ -88,9 +73,7 @@ local int gz_avail(state)
    case, all further file reads will be directly to either the output buffer or
    a user buffer.  If decompressing, the inflate state will be initialized.
    gz_look() will return 0 on success or -1 on failure. */
-local int gz_look(state)
-    gz_statep state;
-{
+local int gz_look(gz_statep state) {
     z_streamp strm = &(state->strm);
 
     /* allocate read buffers and inflate memory */
@@ -157,11 +140,9 @@ local int gz_look(state)
        the output buffer is larger than the input buffer, which also assures
        space for gzungetc() */
     state->x.next = state->out;
-    if (strm->avail_in) {
-        memcpy(state->x.next, strm->next_in, strm->avail_in);
-        state->x.have = strm->avail_in;
-        strm->avail_in = 0;
-    }
+    memcpy(state->x.next, strm->next_in, strm->avail_in);
+    state->x.have = strm->avail_in;
+    strm->avail_in = 0;
     state->how = COPY;
     state->direct = 1;
     return 0;
@@ -172,9 +153,7 @@ local int gz_look(state)
    data.  If the gzip stream completes, state->how is reset to LOOK to look for
    the next gzip stream or raw data, once state->x.have is depleted.  Returns 0
    on success, -1 on failure. */
-local int gz_decomp(state)
-    gz_statep state;
-{
+local int gz_decomp(gz_statep state) {
     int ret = Z_OK;
     unsigned had;
     z_streamp strm = &(state->strm);
@@ -226,9 +205,7 @@ local int gz_decomp(state)
    looked for to determine whether to copy or decompress.  Returns -1 on error,
    otherwise 0.  gz_fetch() will leave state->how as COPY or GZIP unless the
    end of the input file has been reached and all data has been processed.  */
-local int gz_fetch(state)
-    gz_statep state;
-{
+local int gz_fetch(gz_statep state) {
     z_streamp strm = &(state->strm);
 
     do {
@@ -256,10 +233,7 @@ local int gz_fetch(state)
 }
 
 /* Skip len uncompressed bytes of output.  Return -1 on error, 0 on success. */
-local int gz_skip(state, len)
-    gz_statep state;
-    z_off64_t len;
-{
+local int gz_skip(gz_statep state, z_off64_t len) {
     unsigned n;
 
     /* skip over len bytes or reach end-of-file, whichever comes first */
@@ -291,11 +265,7 @@ local int gz_skip(state, len)
    input.  Return the number of bytes read.  If zero is returned, either the
    end of file was reached, or there was an error.  state->err must be
    consulted in that case to determine which. */
-local z_size_t gz_read(state, buf, len)
-    gz_statep state;
-    voidp buf;
-    z_size_t len;
-{
+local z_size_t gz_read(gz_statep state, voidp buf, z_size_t len) {
     z_size_t got;
     unsigned n;
 
@@ -372,11 +342,7 @@ local z_size_t gz_read(state, buf, len)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzread(file, buf, len)
-    gzFile file;
-    voidp buf;
-    unsigned len;
-{
+int ZEXPORT gzread(gzFile file, voidp buf, unsigned len) {
     gz_statep state;
 
     /* get internal structure */
@@ -408,12 +374,7 @@ int ZEXPORT gzread(file, buf, len)
 }
 
 /* -- see zlib.h -- */
-z_size_t ZEXPORT gzfread(buf, size, nitems, file)
-    voidp buf;
-    z_size_t size;
-    z_size_t nitems;
-    gzFile file;
-{
+z_size_t ZEXPORT gzfread(voidp buf, z_size_t size, z_size_t nitems, gzFile file) {
     z_size_t len;
     gz_statep state;
 
@@ -444,9 +405,7 @@ z_size_t ZEXPORT gzfread(buf, size, nitems, file)
 #else
 #  undef gzgetc
 #endif
-int ZEXPORT gzgetc(file)
-    gzFile file;
-{
+int ZEXPORT gzgetc(gzFile file) {
     unsigned char buf[1];
     gz_statep state;
 
@@ -471,17 +430,12 @@ int ZEXPORT gzgetc(file)
     return gz_read(state, buf, 1) < 1 ? -1 : buf[0];
 }
 
-int ZEXPORT gzgetc_(file)
-gzFile file;
-{
+int ZEXPORT gzgetc_(gzFile file) {
     return gzgetc(file);
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzungetc(c, file)
-    int c;
-    gzFile file;
-{
+int ZEXPORT gzungetc(int c, gzFile file) {
     gz_statep state;
 
     /* get internal structure */
@@ -489,6 +443,10 @@ int ZEXPORT gzungetc(c, file)
         return -1;
     state = (gz_statep)file;
 
+    /* in case this was just opened, set up the input buffer */
+    if (state->mode == GZ_READ && state->how == LOOK && state->x.have == 0)
+        (void)gz_look(state);
+
     /* check that we're reading and that there's no (serious) error */
     if (state->mode != GZ_READ ||
         (state->err != Z_OK && state->err != Z_BUF_ERROR))
@@ -538,11 +496,7 @@ int ZEXPORT gzungetc(c, file)
 }
 
 /* -- see zlib.h -- */
-char * ZEXPORT gzgets(file, buf, len)
-    gzFile file;
-    char *buf;
-    int len;
-{
+char * ZEXPORT gzgets(gzFile file, char *buf, int len) {
     unsigned left, n;
     char *str;
     unsigned char *eol;
@@ -602,9 +556,7 @@ char * ZEXPORT gzgets(file, buf, len)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzdirect(file)
-    gzFile file;
-{
+int ZEXPORT gzdirect(gzFile file) {
     gz_statep state;
 
     /* get internal structure */
@@ -622,9 +574,7 @@ int ZEXPORT gzdirect(file)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzclose_r(file)
-    gzFile file;
-{
+int ZEXPORT gzclose_r(gzFile file) {
     int ret, err;
     gz_statep state;