zstdlib 0.1.2-x86-mingw32 → 0.2.0-x86-mingw32

data/ext/zstdlib/{zstd-1.3.8 → zstd-1.4.0}/lib/zstd.h

@@ -70,8 +70,8 @@ extern "C" {
 
 /*------   Version   ------*/
 #define ZSTD_VERSION_MAJOR    1
-#define ZSTD_VERSION_MINOR    3
-#define ZSTD_VERSION_RELEASE  8
+#define ZSTD_VERSION_MINOR    4
+#define ZSTD_VERSION_RELEASE  0
 
 #define ZSTD_VERSION_NUMBER  (ZSTD_VERSION_MAJOR *100*100 + ZSTD_VERSION_MINOR *100 + ZSTD_VERSION_RELEASE)
 ZSTDLIB_API unsigned ZSTD_versionNumber(void);   /**< to check runtime library version */
@@ -89,6 +89,21 @@ ZSTDLIB_API const char* ZSTD_versionString(void);   /* requires v1.3.0+ */
 #  define ZSTD_CLEVEL_DEFAULT 3
 #endif
 
+/***************************************
+*  Constants
+***************************************/
+
+/* All magic numbers are supposed read/written to/from files/memory using little-endian convention */
+#define ZSTD_MAGICNUMBER            0xFD2FB528    /* valid since v0.8.0 */
+#define ZSTD_MAGIC_DICTIONARY       0xEC30A437    /* valid since v0.7.0 */
+#define ZSTD_MAGIC_SKIPPABLE_START  0x184D2A50    /* all 16 values, from 0x184D2A50 to 0x184D2A5F, signal the beginning of a skippable frame */
+#define ZSTD_MAGIC_SKIPPABLE_MASK   0xFFFFFFF0
+
+#define ZSTD_BLOCKSIZELOG_MAX  17
+#define ZSTD_BLOCKSIZE_MAX     (1<<ZSTD_BLOCKSIZELOG_MAX)
+
+
+
 /***************************************
 *  Simple API
 ***************************************/
@@ -145,12 +160,21 @@ ZSTDLIB_API unsigned long long ZSTD_getFrameContentSize(const void *src, size_t
  * @return : decompressed size of `src` frame content _if known and not empty_, 0 otherwise. */
 ZSTDLIB_API unsigned long long ZSTD_getDecompressedSize(const void* src, size_t srcSize);
 
+/*! ZSTD_findFrameCompressedSize() :
+ * `src` should point to the start of a ZSTD frame or skippable frame.
+ * `srcSize` must be >= first frame size
+ * @return : the compressed size of the first frame starting at `src`,
+ *           suitable to pass as `srcSize` to `ZSTD_decompress` or similar,
+ *        or an error code if input is invalid */
+ZSTDLIB_API size_t ZSTD_findFrameCompressedSize(const void* src, size_t srcSize);
+
 
 /*======  Helper functions  ======*/
 #define ZSTD_COMPRESSBOUND(srcSize)   ((srcSize) + ((srcSize)>>8) + (((srcSize) < (128<<10)) ? (((128<<10) - (srcSize)) >> 11) /* margin, from 64 to 0 */ : 0))  /* this formula ensures that bound(A) + bound(B) <= bound(A+B) as long as A and B >= 128 KB */
 ZSTDLIB_API size_t      ZSTD_compressBound(size_t srcSize); /*!< maximum compressed size in worst case single-pass scenario */
 ZSTDLIB_API unsigned    ZSTD_isError(size_t code);          /*!< tells if a `size_t` function result is an error code */
 ZSTDLIB_API const char* ZSTD_getErrorName(size_t code);     /*!< provides readable string from an error code */
+ZSTDLIB_API int         ZSTD_minCLevel(void);               /*!< minimum negative compression level allowed */
 ZSTDLIB_API int         ZSTD_maxCLevel(void);               /*!< maximum compression level available */
 
 
@@ -195,87 +219,322 @@ ZSTDLIB_API size_t ZSTD_decompressDCtx(ZSTD_DCtx* dctx,
                                  const void* src, size_t srcSize);
 
 
-/**************************
-*  Simple dictionary API
-***************************/
-/*! ZSTD_compress_usingDict() :
- *  Compression at an explicit compression level using a Dictionary.
- *  A dictionary can be any arbitrary data segment (also called a prefix),
- *  or a buffer with specified information (see dictBuilder/zdict.h).
- *  Note : This function loads the dictionary, resulting in significant startup delay.
- *         It's intended for a dictionary used only once.
- *  Note 2 : When `dict == NULL || dictSize < 8` no dictionary is used. */
-ZSTDLIB_API size_t ZSTD_compress_usingDict(ZSTD_CCtx* ctx,
-                                           void* dst, size_t dstCapacity,
-                                     const void* src, size_t srcSize,
-                                     const void* dict,size_t dictSize,
-                                           int compressionLevel);
+/***************************************
+*  Advanced compression API
+***************************************/
 
-/*! ZSTD_decompress_usingDict() :
- *  Decompression using a known Dictionary.
- *  Dictionary must be identical to the one used during compression.
- *  Note : This function loads the dictionary, resulting in significant startup delay.
- *         It's intended for a dictionary used only once.
- *  Note : When `dict == NULL || dictSize < 8` no dictionary is used. */
-ZSTDLIB_API size_t ZSTD_decompress_usingDict(ZSTD_DCtx* dctx,
-                                             void* dst, size_t dstCapacity,
-                                       const void* src, size_t srcSize,
-                                       const void* dict,size_t dictSize);
+/* API design :
+ *   Parameters are pushed one by one into an existing context,
+ *   using ZSTD_CCtx_set*() functions.
+ *   Pushed parameters are sticky : they are valid for next compressed frame, and any subsequent frame.
+ *   "sticky" parameters are applicable to `ZSTD_compress2()` and `ZSTD_compressStream*()` !
+ *   They do not apply to "simple" one-shot variants such as ZSTD_compressCCtx()
+ *
+ *   It's possible to reset all parameters to "default" using ZSTD_CCtx_reset().
+ *
+ *   This API supercedes all other "advanced" API entry points in the experimental section.
+ *   In the future, we expect to remove from experimental API entry points which are redundant with this API.
+ */
 
 
-/***********************************
- *  Bulk processing dictionary API
- **********************************/
-typedef struct ZSTD_CDict_s ZSTD_CDict;
+/* Compression strategies, listed from fastest to strongest */
+typedef enum { ZSTD_fast=1,
+               ZSTD_dfast=2,
+               ZSTD_greedy=3,
+               ZSTD_lazy=4,
+               ZSTD_lazy2=5,
+               ZSTD_btlazy2=6,
+               ZSTD_btopt=7,
+               ZSTD_btultra=8,
+               ZSTD_btultra2=9
+               /* note : new strategies _might_ be added in the future.
+                         Only the order (from fast to strong) is guaranteed */
+} ZSTD_strategy;
 
-/*! ZSTD_createCDict() :
- *  When compressing multiple messages / blocks using the same dictionary, it's recommended to load it only once.
- *  ZSTD_createCDict() will create a digested dictionary, ready to start future compression operations without startup cost.
- *  ZSTD_CDict can be created once and shared by multiple threads concurrently, since its usage is read-only.
- * `dictBuffer` can be released after ZSTD_CDict creation, because its content is copied within CDict.
- *  Consider experimental function `ZSTD_createCDict_byReference()` if you prefer to not duplicate `dictBuffer` content.
- *  Note : A ZSTD_CDict can be created from an empty dictBuffer, but it is inefficient when used to compress small data. */
-ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict(const void* dictBuffer, size_t dictSize,
-                                         int compressionLevel);
 
-/*! ZSTD_freeCDict() :
- *  Function frees memory allocated by ZSTD_createCDict(). */
-ZSTDLIB_API size_t      ZSTD_freeCDict(ZSTD_CDict* CDict);
+typedef enum {
 
-/*! ZSTD_compress_usingCDict() :
- *  Compression using a digested Dictionary.
- *  Recommended when same dictionary is used multiple times.
- *  Note : compression level is _decided at dictionary creation time_,
- *     and frame parameters are hardcoded (dictID=yes, contentSize=yes, checksum=no) */
-ZSTDLIB_API size_t ZSTD_compress_usingCDict(ZSTD_CCtx* cctx,
-                                            void* dst, size_t dstCapacity,
-                                      const void* src, size_t srcSize,
-                                      const ZSTD_CDict* cdict);
+    /* compression parameters
+     * Note: When compressing with a ZSTD_CDict these parameters are superseded
+     * by the parameters used to construct the ZSTD_CDict. See ZSTD_CCtx_refCDict()
+     * for more info (superseded-by-cdict). */
+    ZSTD_c_compressionLevel=100, /* Update all compression parameters according to pre-defined cLevel table
+                              * Default level is ZSTD_CLEVEL_DEFAULT==3.
+                              * Special: value 0 means default, which is controlled by ZSTD_CLEVEL_DEFAULT.
+                              * Note 1 : it's possible to pass a negative compression level.
+                              * Note 2 : setting a level sets all default values of other compression parameters */
+    ZSTD_c_windowLog=101,    /* Maximum allowed back-reference distance, expressed as power of 2.
+                              * Must be clamped between ZSTD_WINDOWLOG_MIN and ZSTD_WINDOWLOG_MAX.
+                              * Special: value 0 means "use default windowLog".
+                              * Note: Using a windowLog greater than ZSTD_WINDOWLOG_LIMIT_DEFAULT
+                              *       requires explicitly allowing such window size at decompression stage if using streaming. */
+    ZSTD_c_hashLog=102,      /* Size of the initial probe table, as a power of 2.
+                              * Resulting memory usage is (1 << (hashLog+2)).
+                              * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX.
+                              * Larger tables improve compression ratio of strategies <= dFast,
+                              * and improve speed of strategies > dFast.
+                              * Special: value 0 means "use default hashLog". */
+    ZSTD_c_chainLog=103,     /* Size of the multi-probe search table, as a power of 2.
+                              * Resulting memory usage is (1 << (chainLog+2)).
+                              * Must be clamped between ZSTD_CHAINLOG_MIN and ZSTD_CHAINLOG_MAX.
+                              * Larger tables result in better and slower compression.
+                              * This parameter is useless when using "fast" strategy.
+                              * It's still useful when using "dfast" strategy,
+                              * in which case it defines a secondary probe table.
+                              * Special: value 0 means "use default chainLog". */
+    ZSTD_c_searchLog=104,    /* Number of search attempts, as a power of 2.
+                              * More attempts result in better and slower compression.
+                              * This parameter is useless when using "fast" and "dFast" strategies.
+                              * Special: value 0 means "use default searchLog". */
+    ZSTD_c_minMatch=105,     /* Minimum size of searched matches.
+                              * Note that Zstandard can still find matches of smaller size,
+                              * it just tweaks its search algorithm to look for this size and larger.
+                              * Larger values increase compression and decompression speed, but decrease ratio.
+                              * Must be clamped between ZSTD_MINMATCH_MIN and ZSTD_MINMATCH_MAX.
+                              * Note that currently, for all strategies < btopt, effective minimum is 4.
+                              *                    , for all strategies > fast, effective maximum is 6.
+                              * Special: value 0 means "use default minMatchLength". */
+    ZSTD_c_targetLength=106, /* Impact of this field depends on strategy.
+                              * For strategies btopt, btultra & btultra2:
+                              *     Length of Match considered "good enough" to stop search.
+                              *     Larger values make compression stronger, and slower.
+                              * For strategy fast:
+                              *     Distance between match sampling.
+                              *     Larger values make compression faster, and weaker.
+                              * Special: value 0 means "use default targetLength". */
+    ZSTD_c_strategy=107,     /* See ZSTD_strategy enum definition.
+                              * The higher the value of selected strategy, the more complex it is,
+                              * resulting in stronger and slower compression.
+                              * Special: value 0 means "use default strategy". */
 
+    /* LDM mode parameters */
+    ZSTD_c_enableLongDistanceMatching=160, /* Enable long distance matching.
+                                     * This parameter is designed to improve compression ratio
+                                     * for large inputs, by finding large matches at long distance.
+                                     * It increases memory usage and window size.
+                                     * Note: enabling this parameter increases default ZSTD_c_windowLog to 128 MB
+                                     * except when expressly set to a different value. */
+    ZSTD_c_ldmHashLog=161,   /* Size of the table for long distance matching, as a power of 2.
+                              * Larger values increase memory usage and compression ratio,
+                              * but decrease compression speed.
+                              * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX
+                              * default: windowlog - 7.
+                              * Special: value 0 means "automatically determine hashlog". */
+    ZSTD_c_ldmMinMatch=162,  /* Minimum match size for long distance matcher.
+                              * Larger/too small values usually decrease compression ratio.
+                              * Must be clamped between ZSTD_LDM_MINMATCH_MIN and ZSTD_LDM_MINMATCH_MAX.
+                              * Special: value 0 means "use default value" (default: 64). */
+    ZSTD_c_ldmBucketSizeLog=163, /* Log size of each bucket in the LDM hash table for collision resolution.
+                              * Larger values improve collision resolution but decrease compression speed.
+                              * The maximum value is ZSTD_LDM_BUCKETSIZELOG_MAX.
+                              * Special: value 0 means "use default value" (default: 3). */
+    ZSTD_c_ldmHashRateLog=164, /* Frequency of inserting/looking up entries into the LDM hash table.
+                              * Must be clamped between 0 and (ZSTD_WINDOWLOG_MAX - ZSTD_HASHLOG_MIN).
+                              * Default is MAX(0, (windowLog - ldmHashLog)), optimizing hash table usage.
+                              * Larger values improve compression speed.
+                              * Deviating far from default value will likely result in a compression ratio decrease.
+                              * Special: value 0 means "automatically determine hashRateLog". */
 
-typedef struct ZSTD_DDict_s ZSTD_DDict;
+    /* frame parameters */
+    ZSTD_c_contentSizeFlag=200, /* Content size will be written into frame header _whenever known_ (default:1)
+                              * Content size must be known at the beginning of compression.
+                              * This is automatically the case when using ZSTD_compress2(),
+                              * For streaming variants, content size must be provided with ZSTD_CCtx_setPledgedSrcSize() */
+    ZSTD_c_checksumFlag=201, /* A 32-bits checksum of content is written at end of frame (default:0) */
+    ZSTD_c_dictIDFlag=202,   /* When applicable, dictionary's ID is written into frame header (default:1) */
 
-/*! ZSTD_createDDict() :
- *  Create a digested dictionary, ready to start decompression operation without startup delay.
- *  dictBuffer can be released after DDict creation, as its content is copied inside DDict. */
-ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict(const void* dictBuffer, size_t dictSize);
+    /* multi-threading parameters */
+    /* These parameters are only useful if multi-threading is enabled (compiled with build macro ZSTD_MULTITHREAD).
+     * They return an error otherwise. */
+    ZSTD_c_nbWorkers=400,    /* Select how many threads will be spawned to compress in parallel.
+                              * When nbWorkers >= 1, triggers asynchronous mode when used with ZSTD_compressStream*() :
+                              * ZSTD_compressStream*() consumes input and flush output if possible, but immediately gives back control to caller,
+                              * while compression work is performed in parallel, within worker threads.
+                              * (note : a strong exception to this rule is when first invocation of ZSTD_compressStream2() sets ZSTD_e_end :
+                              *  in which case, ZSTD_compressStream2() delegates to ZSTD_compress2(), which is always a blocking call).
+                              * More workers improve speed, but also increase memory usage.
+                              * Default value is `0`, aka "single-threaded mode" : no worker is spawned, compression is performed inside Caller's thread, all invocations are blocking */
+    ZSTD_c_jobSize=401,      /* Size of a compression job. This value is enforced only when nbWorkers >= 1.
+                              * Each compression job is completed in parallel, so this value can indirectly impact the nb of active threads.
+                              * 0 means default, which is dynamically determined based on compression parameters.
+                              * Job size must be a minimum of overlap size, or 1 MB, whichever is largest.
+                              * The minimum size is automatically and transparently enforced */
+    ZSTD_c_overlapLog=402,   /* Control the overlap size, as a fraction of window size.
+                              * The overlap size is an amount of data reloaded from previous job at the beginning of a new job.
+                              * It helps preserve compression ratio, while each job is compressed in parallel.
+                              * This value is enforced only when nbWorkers >= 1.
+                              * Larger values increase compression ratio, but decrease speed.
+                              * Possible values range from 0 to 9 :
+                              * - 0 means "default" : value will be determined by the library, depending on strategy
+                              * - 1 means "no overlap"
+                              * - 9 means "full overlap", using a full window size.
+                              * Each intermediate rank increases/decreases load size by a factor 2 :
+                              * 9: full window;  8: w/2;  7: w/4;  6: w/8;  5:w/16;  4: w/32;  3:w/64;  2:w/128;  1:no overlap;  0:default
+                              * default value varies between 6 and 9, depending on strategy */
 
-/*! ZSTD_freeDDict() :
- *  Function frees memory allocated with ZSTD_createDDict() */
-ZSTDLIB_API size_t      ZSTD_freeDDict(ZSTD_DDict* ddict);
+    /* note : additional experimental parameters are also available
+     * within the experimental section of the API.
+     * At the time of this writing, they include :
+     * ZSTD_c_rsyncable
+     * ZSTD_c_format
+     * ZSTD_c_forceMaxWindow
+     * ZSTD_c_forceAttachDict
+     * ZSTD_c_literalCompressionMode
+     * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them.
+     * note : never ever use experimentalParam? names directly;
+     *        also, the enums values themselves are unstable and can still change.
+     */
+     ZSTD_c_experimentalParam1=500,
+     ZSTD_c_experimentalParam2=10,
+     ZSTD_c_experimentalParam3=1000,
+     ZSTD_c_experimentalParam4=1001,
+     ZSTD_c_experimentalParam5=1002,
+} ZSTD_cParameter;
 
-/*! ZSTD_decompress_usingDDict() :
- *  Decompression using a digested Dictionary.
- *  Recommended when same dictionary is used multiple times. */
-ZSTDLIB_API size_t ZSTD_decompress_usingDDict(ZSTD_DCtx* dctx,
-                                              void* dst, size_t dstCapacity,
-                                        const void* src, size_t srcSize,
-                                        const ZSTD_DDict* ddict);
+typedef struct {
+    size_t error;
+    int lowerBound;
+    int upperBound;
+} ZSTD_bounds;
 
+/*! ZSTD_cParam_getBounds() :
+ *  All parameters must belong to an interval with lower and upper bounds,
+ *  otherwise they will either trigger an error or be automatically clamped.
+ * @return : a structure, ZSTD_bounds, which contains
+ *         - an error status field, which must be tested using ZSTD_isError()
+ *         - lower and upper bounds, both inclusive
+ */
+ZSTDLIB_API ZSTD_bounds ZSTD_cParam_getBounds(ZSTD_cParameter cParam);
 
-/****************************
-*  Streaming
-****************************/
+/*! ZSTD_CCtx_setParameter() :
+ *  Set one compression parameter, selected by enum ZSTD_cParameter.
+ *  All parameters have valid bounds. Bounds can be queried using ZSTD_cParam_getBounds().
+ *  Providing a value beyond bound will either clamp it, or trigger an error (depending on parameter).
+ *  Setting a parameter is generally only possible during frame initialization (before starting compression).
+ *  Exception : when using multi-threading mode (nbWorkers >= 1),
+ *              the following parameters can be updated _during_ compression (within same frame):
+ *              => compressionLevel, hashLog, chainLog, searchLog, minMatch, targetLength and strategy.
+ *              new parameters will be active for next job only (after a flush()).
+ * @return : an error code (which can be tested using ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_CCtx_setParameter(ZSTD_CCtx* cctx, ZSTD_cParameter param, int value);
+
+/*! ZSTD_CCtx_setPledgedSrcSize() :
+ *  Total input data size to be compressed as a single frame.
+ *  Value will be written in frame header, unless if explicitly forbidden using ZSTD_c_contentSizeFlag.
+ *  This value will also be controlled at end of frame, and trigger an error if not respected.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Note 1 : pledgedSrcSize==0 actually means zero, aka an empty frame.
+ *           In order to mean "unknown content size", pass constant ZSTD_CONTENTSIZE_UNKNOWN.
+ *           ZSTD_CONTENTSIZE_UNKNOWN is default value for any new frame.
+ *  Note 2 : pledgedSrcSize is only valid once, for the next frame.
+ *           It's discarded at the end of the frame, and replaced by ZSTD_CONTENTSIZE_UNKNOWN.
+ *  Note 3 : Whenever all input data is provided and consumed in a single round,
+ *           for example with ZSTD_compress2(),
+ *           or invoking immediately ZSTD_compressStream2(,,,ZSTD_e_end),
+ *           this value is automatically overridden by srcSize instead.
+ */
+ZSTDLIB_API size_t ZSTD_CCtx_setPledgedSrcSize(ZSTD_CCtx* cctx, unsigned long long pledgedSrcSize);
+
+typedef enum {
+    ZSTD_reset_session_only = 1,
+    ZSTD_reset_parameters = 2,
+    ZSTD_reset_session_and_parameters = 3
+} ZSTD_ResetDirective;
+
+/*! ZSTD_CCtx_reset() :
+ *  There are 2 different things that can be reset, independently or jointly :
+ *  - The session : will stop compressing current frame, and make CCtx ready to start a new one.
+ *                  Useful after an error, or to interrupt any ongoing compression.
+ *                  Any internal data not yet flushed is cancelled.
+ *                  Compression parameters and dictionary remain unchanged.
+ *                  They will be used to compress next frame.
+ *                  Resetting session never fails.
+ *  - The parameters : changes all parameters back to "default".
+ *                  This removes any reference to any dictionary too.
+ *                  Parameters can only be changed between 2 sessions (i.e. no compression is currently ongoing)
+ *                  otherwise the reset fails, and function returns an error value (which can be tested using ZSTD_isError())
+ *  - Both : similar to resetting the session, followed by resetting parameters.
+ */
+ZSTDLIB_API size_t ZSTD_CCtx_reset(ZSTD_CCtx* cctx, ZSTD_ResetDirective reset);
+
+/*! ZSTD_compress2() :
+ *  Behave the same as ZSTD_compressCCtx(), but compression parameters are set using the advanced API.
+ *  ZSTD_compress2() always starts a new frame.
+ *  Should cctx hold data from a previously unfinished frame, everything about it is forgotten.
+ *  - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*()
+ *  - The function is always blocking, returns when compression is completed.
+ *  Hint : compression runs faster if `dstCapacity` >=  `ZSTD_compressBound(srcSize)`.
+ * @return : compressed size written into `dst` (<= `dstCapacity),
+ *           or an error code if it fails (which can be tested using ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_compress2( ZSTD_CCtx* cctx,
+                                   void* dst, size_t dstCapacity,
+                             const void* src, size_t srcSize);
+
+
+/***************************************
+*  Advanced decompression API
+***************************************/
+
+/* The advanced API pushes parameters one by one into an existing DCtx context.
+ * Parameters are sticky, and remain valid for all following frames
+ * using the same DCtx context.
+ * It's possible to reset parameters to default values using ZSTD_DCtx_reset().
+ * Note : This API is compatible with existing ZSTD_decompressDCtx() and ZSTD_decompressStream().
+ *        Therefore, no new decompression function is necessary.
+ */
+
+typedef enum {
+
+    ZSTD_d_windowLogMax=100, /* Select a size limit (in power of 2) beyond which
+                              * the streaming API will refuse to allocate memory buffer
+                              * in order to protect the host from unreasonable memory requirements.
+                              * This parameter is only useful in streaming mode, since no internal buffer is allocated in single-pass mode.
+                              * By default, a decompression context accepts window sizes <= (1 << ZSTD_WINDOWLOG_LIMIT_DEFAULT).
+                              * Special: value 0 means "use default maximum windowLog". */
+
+    /* note : additional experimental parameters are also available
+     * within the experimental section of the API.
+     * At the time of this writing, they include :
+     * ZSTD_c_format
+     * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them.
+     * note : never ever use experimentalParam? names directly
+     */
+     ZSTD_d_experimentalParam1=1000
+
+} ZSTD_dParameter;
+
+/*! ZSTD_dParam_getBounds() :
+ *  All parameters must belong to an interval with lower and upper bounds,
+ *  otherwise they will either trigger an error or be automatically clamped.
+ * @return : a structure, ZSTD_bounds, which contains
+ *         - an error status field, which must be tested using ZSTD_isError()
+ *         - both lower and upper bounds, inclusive
+ */
+ZSTDLIB_API ZSTD_bounds ZSTD_dParam_getBounds(ZSTD_dParameter dParam);
+
+/*! ZSTD_DCtx_setParameter() :
+ *  Set one compression parameter, selected by enum ZSTD_dParameter.
+ *  All parameters have valid bounds. Bounds can be queried using ZSTD_dParam_getBounds().
+ *  Providing a value beyond bound will either clamp it, or trigger an error (depending on parameter).
+ *  Setting a parameter is only possible during frame initialization (before starting decompression).
+ * @return : 0, or an error code (which can be tested using ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_setParameter(ZSTD_DCtx* dctx, ZSTD_dParameter param, int value);
+
+/*! ZSTD_DCtx_reset() :
+ *  Return a DCtx to clean state.
+ *  Session and parameters can be reset jointly or separately.
+ *  Parameters can only be reset when no active frame is being decompressed.
+ * @return : 0, or an error code, which can be tested with ZSTD_isError()
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_reset(ZSTD_DCtx* dctx, ZSTD_ResetDirective reset);
+
+
+/****************************
+*  Streaming
+****************************/
 
 typedef struct ZSTD_inBuffer_s {
   const void* src;    /**< start of input buffer */
@@ -306,34 +565,46 @@ typedef struct ZSTD_outBuffer_s {
 *  Parameters are sticky : when starting a new compression on the same context,
 *  it will re-use the same sticky parameters as previous compression session.
 *  When in doubt, it's recommended to fully initialize the context before usage.
-*  Use ZSTD_initCStream() to set the parameter to a selected compression level.
-*  Use advanced API (ZSTD_CCtx_setParameter(), etc.) to set more specific parameters.
+*  Use ZSTD_CCtx_reset() to reset the context and ZSTD_CCtx_setParameter(),
+*  ZSTD_CCtx_setPledgedSrcSize(), or ZSTD_CCtx_loadDictionary() and friends to
+*  set more specific parameters, the pledged source size, or load a dictionary.
 *
-*  Use ZSTD_compressStream() as many times as necessary to consume input stream.
-*  The function will automatically update both `pos` fields within `input` and `output`.
-*  Note that the function may not consume the entire input,
-*  for example, because the output buffer is already full,
-*  in which case `input.pos < input.size`.
+*  Use ZSTD_compressStream2() with ZSTD_e_continue as many times as necessary to
+*  consume input stream. The function will automatically update both `pos`
+*  fields within `input` and `output`.
+*  Note that the function may not consume the entire input, for example, because
+*  the output buffer is already full, in which case `input.pos < input.size`.
 *  The caller must check if input has been entirely consumed.
 *  If not, the caller must make some room to receive more compressed data,
 *  and then present again remaining input data.
-* @return : a size hint, preferred nb of bytes to use as input for next function call
+*  note: ZSTD_e_continue is guaranteed to make some forward progress when called,
+*        but doesn't guarantee maximal forward progress. This is especially relevant
+*        when compressing with multiple threads. The call won't block if it can
+*        consume some input, but if it can't it will wait for some, but not all,
+*        output to be flushed.
+* @return : provides a minimum amount of data remaining to be flushed from internal buffers
 *           or an error code, which can be tested using ZSTD_isError().
-*           Note 1 : it's just a hint, to help latency a little, any value will work fine.
-*           Note 2 : size hint is guaranteed to be <= ZSTD_CStreamInSize()
 *
 *  At any moment, it's possible to flush whatever data might remain stuck within internal buffer,
-*  using ZSTD_flushStream(). `output->pos` will be updated.
-*  Note that, if `output->size` is too small, a single invocation of ZSTD_flushStream() might not be enough (return code > 0).
-*  In which case, make some room to receive more compressed data, and call again ZSTD_flushStream().
+*  using ZSTD_compressStream2() with ZSTD_e_flush. `output->pos` will be updated.
+*  Note that, if `output->size` is too small, a single invocation with ZSTD_e_flush might not be enough (return code > 0).
+*  In which case, make some room to receive more compressed data, and call again ZSTD_compressStream2() with ZSTD_e_flush.
+*  You must continue calling ZSTD_compressStream2() with ZSTD_e_flush until it returns 0, at which point you can change the
+*  operation.
+*  note: ZSTD_e_flush will flush as much output as possible, meaning when compressing with multiple threads, it will
+*        block until the flush is complete or the output buffer is full.
 *  @return : 0 if internal buffers are entirely flushed,
 *            >0 if some data still present within internal buffer (the value is minimal estimation of remaining size),
 *            or an error code, which can be tested using ZSTD_isError().
 *
-*  ZSTD_endStream() instructs to finish a frame.
+*  Calling ZSTD_compressStream2() with ZSTD_e_end instructs to finish a frame.
 *  It will perform a flush and write frame epilogue.
 *  The epilogue is required for decoders to consider a frame completed.
-*  flush() operation is the same, and follows same rules as ZSTD_flushStream().
+*  flush operation is the same, and follows same rules as calling ZSTD_compressStream2() with ZSTD_e_flush.
+*  You must continue calling ZSTD_compressStream2() with ZSTD_e_end until it returns 0, at which point you are free to
+*  start a new frame.
+*  note: ZSTD_e_end will flush as much output as possible, meaning when compressing with multiple threads, it will
+*        block until the flush is complete or the output buffer is full.
 *  @return : 0 if frame fully completed and fully flushed,
 *            >0 if some data still present within internal buffer (the value is minimal estimation of remaining size),
 *            or an error code, which can be tested using ZSTD_isError().
@@ -347,14 +618,74 @@ ZSTDLIB_API ZSTD_CStream* ZSTD_createCStream(void);
 ZSTDLIB_API size_t ZSTD_freeCStream(ZSTD_CStream* zcs);
 
 /*===== Streaming compression functions =====*/
-ZSTDLIB_API size_t ZSTD_initCStream(ZSTD_CStream* zcs, int compressionLevel);
-ZSTDLIB_API size_t ZSTD_compressStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output, ZSTD_inBuffer* input);
-ZSTDLIB_API size_t ZSTD_flushStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output);
-ZSTDLIB_API size_t ZSTD_endStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output);
+typedef enum {
+    ZSTD_e_continue=0, /* collect more data, encoder decides when to output compressed result, for optimal compression ratio */
+    ZSTD_e_flush=1,    /* flush any data provided so far,
+                        * it creates (at least) one new block, that can be decoded immediately on reception;
+                        * frame will continue: any future data can still reference previously compressed data, improving compression.
+                        * note : multithreaded compression will block to flush as much output as possible. */
+    ZSTD_e_end=2       /* flush any remaining data _and_ close current frame.
+                        * note that frame is only closed after compressed data is fully flushed (return value == 0).
+                        * After that point, any additional data starts a new frame.
+                        * note : each frame is independent (does not reference any content from previous frame).
+                        : note : multithreaded compression will block to flush as much output as possible. */
+} ZSTD_EndDirective;
+
+/*! ZSTD_compressStream2() :
+ *  Behaves about the same as ZSTD_compressStream, with additional control on end directive.
+ *  - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*()
+ *  - Compression parameters cannot be changed once compression is started (save a list of exceptions in multi-threading mode)
+ *  - output->pos must be <= dstCapacity, input->pos must be <= srcSize
+ *  - output->pos and input->pos will be updated. They are guaranteed to remain below their respective limit.
+ *  - When nbWorkers==0 (default), function is blocking : it completes its job before returning to caller.
+ *  - When nbWorkers>=1, function is non-blocking : it just acquires a copy of input, and distributes jobs to internal worker threads, flush whatever is available,
+ *                                                  and then immediately returns, just indicating that there is some data remaining to be flushed.
+ *                                                  The function nonetheless guarantees forward progress : it will return only after it reads or write at least 1+ byte.
+ *  - Exception : if the first call requests a ZSTD_e_end directive and provides enough dstCapacity, the function delegates to ZSTD_compress2() which is always blocking.
+ *  - @return provides a minimum amount of data remaining to be flushed from internal buffers
+ *            or an error code, which can be tested using ZSTD_isError().
+ *            if @return != 0, flush is not fully completed, there is still some data left within internal buffers.
+ *            This is useful for ZSTD_e_flush, since in this case more flushes are necessary to empty all buffers.
+ *            For ZSTD_e_end, @return == 0 when internal buffers are fully flushed and frame is completed.
+ *  - after a ZSTD_e_end directive, if internal buffer is not fully flushed (@return != 0),
+ *            only ZSTD_e_end or ZSTD_e_flush operations are allowed.
+ *            Before starting a new compression job, or changing compression parameters,
+ *            it is required to fully flush internal buffers.
+ */
+ZSTDLIB_API size_t ZSTD_compressStream2( ZSTD_CCtx* cctx,
+                                         ZSTD_outBuffer* output,
+                                         ZSTD_inBuffer* input,
+                                         ZSTD_EndDirective endOp);
 
 ZSTDLIB_API size_t ZSTD_CStreamInSize(void);    /**< recommended size for input buffer */
 ZSTDLIB_API size_t ZSTD_CStreamOutSize(void);   /**< recommended size for output buffer. Guarantee to successfully flush at least one complete compressed block in all circumstances. */
 
+/*******************************************************************************
+ * This is a legacy streaming API, and can be replaced by ZSTD_CCtx_reset() and
+ * ZSTD_compressStream2(). It is redundant, but is still fully supported.
+ * Advanced parameters and dictionary compression can only be used through the
+ * new API.
+ ******************************************************************************/
+
+/**
+ * Equivalent to:
+ *
+ *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ *     ZSTD_CCtx_refCDict(zcs, NULL); // clear the dictionary (if any)
+ *     ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel);
+ */
+ZSTDLIB_API size_t ZSTD_initCStream(ZSTD_CStream* zcs, int compressionLevel);
+/**
+ * Alternative for ZSTD_compressStream2(zcs, output, input, ZSTD_e_continue).
+ * NOTE: The return value is different. ZSTD_compressStream() returns a hint for
+ * the next read size (if non-zero and not an error). ZSTD_compressStream2()
+ * returns the number of bytes left to flush (if non-zero and not an error).
+ */
+ZSTDLIB_API size_t ZSTD_compressStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output, ZSTD_inBuffer* input);
+/** Equivalent to ZSTD_compressStream2(zcs, output, &emptyInput, ZSTD_e_flush). */
+ZSTDLIB_API size_t ZSTD_flushStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output);
+/** Equivalent to ZSTD_compressStream2(zcs, output, &emptyInput, ZSTD_e_end). */
+ZSTDLIB_API size_t ZSTD_endStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output);
 
 
 /*-***************************************************************************
@@ -391,295 +722,136 @@ ZSTDLIB_API ZSTD_DStream* ZSTD_createDStream(void);
 ZSTDLIB_API size_t ZSTD_freeDStream(ZSTD_DStream* zds);
 
 /*===== Streaming decompression functions =====*/
+
+/* This function is redundant with the advanced API and equivalent to:
+ *
+ *     ZSTD_DCtx_reset(zds);
+ *     ZSTD_DCtx_refDDict(zds, NULL);
+ */
 ZSTDLIB_API size_t ZSTD_initDStream(ZSTD_DStream* zds);
+
 ZSTDLIB_API size_t ZSTD_decompressStream(ZSTD_DStream* zds, ZSTD_outBuffer* output, ZSTD_inBuffer* input);
 
 ZSTDLIB_API size_t ZSTD_DStreamInSize(void);    /*!< recommended size for input buffer */
 ZSTDLIB_API size_t ZSTD_DStreamOutSize(void);   /*!< recommended size for output buffer. Guarantee to successfully flush at least one complete block in all circumstances. */
 
-#endif  /* ZSTD_H_235446 */
-
-
-
-
-/****************************************************************************************
- *   ADVANCED AND EXPERIMENTAL FUNCTIONS
- ****************************************************************************************
- * The definitions in the following section are considered experimental.
- * They are provided for advanced scenarios.
- * They should never be used with a dynamic library, as prototypes may change in the future.
- * Use them only in association with static linking.
- * ***************************************************************************************/
-
-#if defined(ZSTD_STATIC_LINKING_ONLY) && !defined(ZSTD_H_ZSTD_STATIC_LINKING_ONLY)
-#define ZSTD_H_ZSTD_STATIC_LINKING_ONLY
-
-
-/****************************************************************************************
- *   Candidate API for promotion to stable status
- ****************************************************************************************
- * The following symbols and constants form the "staging area" :
- * they are considered to join "stable API" by v1.4.0.
- * The proposal is written so that it can be made stable "as is",
- * though it's still possible to suggest improvements.
- * Staging is in fact last chance for changes,
- * the API is locked once reaching "stable" status.
- * ***************************************************************************************/
-
-
-/* ===  Constants   === */
-
-/* all magic numbers are supposed read/written to/from files/memory using little-endian convention */
-#define ZSTD_MAGICNUMBER            0xFD2FB528    /* valid since v0.8.0 */
-#define ZSTD_MAGIC_DICTIONARY       0xEC30A437    /* valid since v0.7.0 */
-#define ZSTD_MAGIC_SKIPPABLE_START  0x184D2A50    /* all 16 values, from 0x184D2A50 to 0x184D2A5F, signal the beginning of a skippable frame */
-#define ZSTD_MAGIC_SKIPPABLE_MASK   0xFFFFFFF0
-
-#define ZSTD_BLOCKSIZELOG_MAX  17
-#define ZSTD_BLOCKSIZE_MAX     (1<<ZSTD_BLOCKSIZELOG_MAX)
-
-
-/* ===   query limits   === */
-
-ZSTDLIB_API int ZSTD_minCLevel(void);  /*!< minimum negative compression level allowed */
-
-
-/* ===   frame size   === */
-
-/*! ZSTD_findFrameCompressedSize() :
- * `src` should point to the start of a ZSTD frame or skippable frame.
- * `srcSize` must be >= first frame size
- * @return : the compressed size of the first frame starting at `src`,
- *           suitable to pass as `srcSize` to `ZSTD_decompress` or similar,
- *        or an error code if input is invalid */
-ZSTDLIB_API size_t ZSTD_findFrameCompressedSize(const void* src, size_t srcSize);
 
+/**************************
+*  Simple dictionary API
+***************************/
+/*! ZSTD_compress_usingDict() :
+ *  Compression at an explicit compression level using a Dictionary.
+ *  A dictionary can be any arbitrary data segment (also called a prefix),
+ *  or a buffer with specified information (see dictBuilder/zdict.h).
+ *  Note : This function loads the dictionary, resulting in significant startup delay.
+ *         It's intended for a dictionary used only once.
+ *  Note 2 : When `dict == NULL || dictSize < 8` no dictionary is used. */
+ZSTDLIB_API size_t ZSTD_compress_usingDict(ZSTD_CCtx* ctx,
+                                           void* dst, size_t dstCapacity,
+                                     const void* src, size_t srcSize,
+                                     const void* dict,size_t dictSize,
+                                           int compressionLevel);
 
-/* ===   Memory management   === */
+/*! ZSTD_decompress_usingDict() :
+ *  Decompression using a known Dictionary.
+ *  Dictionary must be identical to the one used during compression.
+ *  Note : This function loads the dictionary, resulting in significant startup delay.
+ *         It's intended for a dictionary used only once.
+ *  Note : When `dict == NULL || dictSize < 8` no dictionary is used. */
+ZSTDLIB_API size_t ZSTD_decompress_usingDict(ZSTD_DCtx* dctx,
+                                             void* dst, size_t dstCapacity,
+                                       const void* src, size_t srcSize,
+                                       const void* dict,size_t dictSize);
 
-/*! ZSTD_sizeof_*() :
- *  These functions give the _current_ memory usage of selected object.
- *  Note that object memory usage can evolve (increase or decrease) over time. */
-ZSTDLIB_API size_t ZSTD_sizeof_CCtx(const ZSTD_CCtx* cctx);
-ZSTDLIB_API size_t ZSTD_sizeof_DCtx(const ZSTD_DCtx* dctx);
-ZSTDLIB_API size_t ZSTD_sizeof_CStream(const ZSTD_CStream* zcs);
-ZSTDLIB_API size_t ZSTD_sizeof_DStream(const ZSTD_DStream* zds);
-ZSTDLIB_API size_t ZSTD_sizeof_CDict(const ZSTD_CDict* cdict);
-ZSTDLIB_API size_t ZSTD_sizeof_DDict(const ZSTD_DDict* ddict);
 
+/***********************************
+ *  Bulk processing dictionary API
+ **********************************/
+typedef struct ZSTD_CDict_s ZSTD_CDict;
 
-/***************************************
-*  Advanced compression API
-***************************************/
+/*! ZSTD_createCDict() :
+ *  When compressing multiple messages / blocks using the same dictionary, it's recommended to load it only once.
+ *  ZSTD_createCDict() will create a digested dictionary, ready to start future compression operations without startup cost.
+ *  ZSTD_CDict can be created once and shared by multiple threads concurrently, since its usage is read-only.
+ * `dictBuffer` can be released after ZSTD_CDict creation, because its content is copied within CDict.
+ *  Consider experimental function `ZSTD_createCDict_byReference()` if you prefer to not duplicate `dictBuffer` content.
+ *  Note : A ZSTD_CDict can be created from an empty dictBuffer, but it is inefficient when used to compress small data. */
+ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict(const void* dictBuffer, size_t dictSize,
+                                         int compressionLevel);
 
-/* API design :
- *   Parameters are pushed one by one into an existing context,
- *   using ZSTD_CCtx_set*() functions.
- *   Pushed parameters are sticky : they are valid for next compressed frame, and any subsequent frame.
- *   "sticky" parameters are applicable to `ZSTD_compress2()` and `ZSTD_compressStream*()` !
- *   They do not apply to "simple" one-shot variants such as ZSTD_compressCCtx()
- *
- *   It's possible to reset all parameters to "default" using ZSTD_CCtx_reset().
- *
- *   This API supercedes all other "advanced" API entry points in the experimental section.
- *   In the future, we expect to remove from experimental API entry points which are redundant with this API.
- */
+/*! ZSTD_freeCDict() :
+ *  Function frees memory allocated by ZSTD_createCDict(). */
+ZSTDLIB_API size_t      ZSTD_freeCDict(ZSTD_CDict* CDict);
 
+/*! ZSTD_compress_usingCDict() :
+ *  Compression using a digested Dictionary.
+ *  Recommended when same dictionary is used multiple times.
+ *  Note : compression level is _decided at dictionary creation time_,
+ *     and frame parameters are hardcoded (dictID=yes, contentSize=yes, checksum=no) */
+ZSTDLIB_API size_t ZSTD_compress_usingCDict(ZSTD_CCtx* cctx,
+                                            void* dst, size_t dstCapacity,
+                                      const void* src, size_t srcSize,
+                                      const ZSTD_CDict* cdict);
 
-/* Compression strategies, listed from fastest to strongest */
-typedef enum { ZSTD_fast=1,
-               ZSTD_dfast=2,
-               ZSTD_greedy=3,
-               ZSTD_lazy=4,
-               ZSTD_lazy2=5,
-               ZSTD_btlazy2=6,
-               ZSTD_btopt=7,
-               ZSTD_btultra=8,
-               ZSTD_btultra2=9
-               /* note : new strategies _might_ be added in the future.
-                         Only the order (from fast to strong) is guaranteed */
-} ZSTD_strategy;
 
+typedef struct ZSTD_DDict_s ZSTD_DDict;
 
-typedef enum {
+/*! ZSTD_createDDict() :
+ *  Create a digested dictionary, ready to start decompression operation without startup delay.
+ *  dictBuffer can be released after DDict creation, as its content is copied inside DDict. */
+ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict(const void* dictBuffer, size_t dictSize);
 
-    /* compression parameters */
-    ZSTD_c_compressionLevel=100, /* Update all compression parameters according to pre-defined cLevel table
-                              * Default level is ZSTD_CLEVEL_DEFAULT==3.
-                              * Special: value 0 means default, which is controlled by ZSTD_CLEVEL_DEFAULT.
-                              * Note 1 : it's possible to pass a negative compression level.
-                              * Note 2 : setting a level sets all default values of other compression parameters */
-    ZSTD_c_windowLog=101,    /* Maximum allowed back-reference distance, expressed as power of 2.
-                              * Must be clamped between ZSTD_WINDOWLOG_MIN and ZSTD_WINDOWLOG_MAX.
-                              * Special: value 0 means "use default windowLog".
-                              * Note: Using a windowLog greater than ZSTD_WINDOWLOG_LIMIT_DEFAULT
-                              *       requires explicitly allowing such window size at decompression stage if using streaming. */
-    ZSTD_c_hashLog=102,      /* Size of the initial probe table, as a power of 2.
-                              * Resulting memory usage is (1 << (hashLog+2)).
-                              * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX.
-                              * Larger tables improve compression ratio of strategies <= dFast,
-                              * and improve speed of strategies > dFast.
-                              * Special: value 0 means "use default hashLog". */
-    ZSTD_c_chainLog=103,     /* Size of the multi-probe search table, as a power of 2.
-                              * Resulting memory usage is (1 << (chainLog+2)).
-                              * Must be clamped between ZSTD_CHAINLOG_MIN and ZSTD_CHAINLOG_MAX.
-                              * Larger tables result in better and slower compression.
-                              * This parameter is useless when using "fast" strategy.
-                              * It's still useful when using "dfast" strategy,
-                              * in which case it defines a secondary probe table.
-                              * Special: value 0 means "use default chainLog". */
-    ZSTD_c_searchLog=104,    /* Number of search attempts, as a power of 2.
-                              * More attempts result in better and slower compression.
-                              * This parameter is useless when using "fast" and "dFast" strategies.
-                              * Special: value 0 means "use default searchLog". */
-    ZSTD_c_minMatch=105,     /* Minimum size of searched matches.
-                              * Note that Zstandard can still find matches of smaller size,
-                              * it just tweaks its search algorithm to look for this size and larger.
-                              * Larger values increase compression and decompression speed, but decrease ratio.
-                              * Must be clamped between ZSTD_MINMATCH_MIN and ZSTD_MINMATCH_MAX.
-                              * Note that currently, for all strategies < btopt, effective minimum is 4.
-                              *                    , for all strategies > fast, effective maximum is 6.
-                              * Special: value 0 means "use default minMatchLength". */
-    ZSTD_c_targetLength=106, /* Impact of this field depends on strategy.
-                              * For strategies btopt, btultra & btultra2:
-                              *     Length of Match considered "good enough" to stop search.
-                              *     Larger values make compression stronger, and slower.
-                              * For strategy fast:
-                              *     Distance between match sampling.
-                              *     Larger values make compression faster, and weaker.
-                              * Special: value 0 means "use default targetLength". */
-    ZSTD_c_strategy=107,     /* See ZSTD_strategy enum definition.
-                              * The higher the value of selected strategy, the more complex it is,
-                              * resulting in stronger and slower compression.
-                              * Special: value 0 means "use default strategy". */
+/*! ZSTD_freeDDict() :
+ *  Function frees memory allocated with ZSTD_createDDict() */
+ZSTDLIB_API size_t      ZSTD_freeDDict(ZSTD_DDict* ddict);
 
-    /* LDM mode parameters */
-    ZSTD_c_enableLongDistanceMatching=160, /* Enable long distance matching.
-                                     * This parameter is designed to improve compression ratio
-                                     * for large inputs, by finding large matches at long distance.
-                                     * It increases memory usage and window size.
-                                     * Note: enabling this parameter increases default ZSTD_c_windowLog to 128 MB
-                                     * except when expressly set to a different value. */
-    ZSTD_c_ldmHashLog=161,   /* Size of the table for long distance matching, as a power of 2.
-                              * Larger values increase memory usage and compression ratio,
-                              * but decrease compression speed.
-                              * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX
-                              * default: windowlog - 7.
-                              * Special: value 0 means "automatically determine hashlog". */
-    ZSTD_c_ldmMinMatch=162,  /* Minimum match size for long distance matcher.
-                              * Larger/too small values usually decrease compression ratio.
-                              * Must be clamped between ZSTD_LDM_MINMATCH_MIN and ZSTD_LDM_MINMATCH_MAX.
-                              * Special: value 0 means "use default value" (default: 64). */
-    ZSTD_c_ldmBucketSizeLog=163, /* Log size of each bucket in the LDM hash table for collision resolution.
-                              * Larger values improve collision resolution but decrease compression speed.
-                              * The maximum value is ZSTD_LDM_BUCKETSIZELOG_MAX.
-                              * Special: value 0 means "use default value" (default: 3). */
-    ZSTD_c_ldmHashRateLog=164, /* Frequency of inserting/looking up entries into the LDM hash table.
-                              * Must be clamped between 0 and (ZSTD_WINDOWLOG_MAX - ZSTD_HASHLOG_MIN).
-                              * Default is MAX(0, (windowLog - ldmHashLog)), optimizing hash table usage.
-                              * Larger values improve compression speed.
-                              * Deviating far from default value will likely result in a compression ratio decrease.
-                              * Special: value 0 means "automatically determine hashRateLog". */
+/*! ZSTD_decompress_usingDDict() :
+ *  Decompression using a digested Dictionary.
+ *  Recommended when same dictionary is used multiple times. */
+ZSTDLIB_API size_t ZSTD_decompress_usingDDict(ZSTD_DCtx* dctx,
+                                              void* dst, size_t dstCapacity,
+                                        const void* src, size_t srcSize,
+                                        const ZSTD_DDict* ddict);
 
-    /* frame parameters */
-    ZSTD_c_contentSizeFlag=200, /* Content size will be written into frame header _whenever known_ (default:1)
-                              * Content size must be known at the beginning of compression.
-                              * This is automatically the case when using ZSTD_compress2(),
-                              * For streaming variants, content size must be provided with ZSTD_CCtx_setPledgedSrcSize() */
-    ZSTD_c_checksumFlag=201, /* A 32-bits checksum of content is written at end of frame (default:0) */
-    ZSTD_c_dictIDFlag=202,   /* When applicable, dictionary's ID is written into frame header (default:1) */
 
-    /* multi-threading parameters */
-    /* These parameters are only useful if multi-threading is enabled (compiled with build macro ZSTD_MULTITHREAD).
-     * They return an error otherwise. */
-    ZSTD_c_nbWorkers=400,    /* Select how many threads will be spawned to compress in parallel.
-                              * When nbWorkers >= 1, triggers asynchronous mode when used with ZSTD_compressStream*() :
-                              * ZSTD_compressStream*() consumes input and flush output if possible, but immediately gives back control to caller,
-                              * while compression work is performed in parallel, within worker threads.
-                              * (note : a strong exception to this rule is when first invocation of ZSTD_compressStream2() sets ZSTD_e_end :
-                              *  in which case, ZSTD_compressStream2() delegates to ZSTD_compress2(), which is always a blocking call).
-                              * More workers improve speed, but also increase memory usage.
-                              * Default value is `0`, aka "single-threaded mode" : no worker is spawned, compression is performed inside Caller's thread, all invocations are blocking */
-    ZSTD_c_jobSize=401,      /* Size of a compression job. This value is enforced only when nbWorkers >= 1.
-                              * Each compression job is completed in parallel, so this value can indirectly impact the nb of active threads.
-                              * 0 means default, which is dynamically determined based on compression parameters.
-                              * Job size must be a minimum of overlap size, or 1 MB, whichever is largest.
-                              * The minimum size is automatically and transparently enforced */
-    ZSTD_c_overlapLog=402,   /* Control the overlap size, as a fraction of window size.
-                              * The overlap size is an amount of data reloaded from previous job at the beginning of a new job.
-                              * It helps preserve compression ratio, while each job is compressed in parallel.
-                              * This value is enforced only when nbWorkers >= 1.
-                              * Larger values increase compression ratio, but decrease speed.
-                              * Possible values range from 0 to 9 :
-                              * - 0 means "default" : value will be determined by the library, depending on strategy
-                              * - 1 means "no overlap"
-                              * - 9 means "full overlap", using a full window size.
-                              * Each intermediate rank increases/decreases load size by a factor 2 :
-                              * 9: full window;  8: w/2;  7: w/4;  6: w/8;  5:w/16;  4: w/32;  3:w/64;  2:w/128;  1:no overlap;  0:default
-                              * default value varies between 6 and 9, depending on strategy */
+/********************************
+ *  Dictionary helper functions
+ *******************************/
 
-    /* note : additional experimental parameters are also available
-     * within the experimental section of the API.
-     * At the time of this writing, they include :
-     * ZSTD_c_rsyncable
-     * ZSTD_c_format
-     * ZSTD_c_forceMaxWindow
-     * ZSTD_c_forceAttachDict
-     * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them.
-     * note : never ever use experimentalParam? names directly;
-     *        also, the enums values themselves are unstable and can still change.
-     */
-     ZSTD_c_experimentalParam1=500,
-     ZSTD_c_experimentalParam2=10,
-     ZSTD_c_experimentalParam3=1000,
-     ZSTD_c_experimentalParam4=1001
-} ZSTD_cParameter;
+/*! ZSTD_getDictID_fromDict() :
+ *  Provides the dictID stored within dictionary.
+ *  if @return == 0, the dictionary is not conformant with Zstandard specification.
+ *  It can still be loaded, but as a content-only dictionary. */
+ZSTDLIB_API unsigned ZSTD_getDictID_fromDict(const void* dict, size_t dictSize);
 
+/*! ZSTD_getDictID_fromDDict() :
+ *  Provides the dictID of the dictionary loaded into `ddict`.
+ *  If @return == 0, the dictionary is not conformant to Zstandard specification, or empty.
+ *  Non-conformant dictionaries can still be loaded, but as content-only dictionaries. */
+ZSTDLIB_API unsigned ZSTD_getDictID_fromDDict(const ZSTD_DDict* ddict);
 
-typedef struct {
-    size_t error;
-    int lowerBound;
-    int upperBound;
-} ZSTD_bounds;
+/*! ZSTD_getDictID_fromFrame() :
+ *  Provides the dictID required to decompressed the frame stored within `src`.
+ *  If @return == 0, the dictID could not be decoded.
+ *  This could for one of the following reasons :
+ *  - The frame does not require a dictionary to be decoded (most common case).
+ *  - The frame was built with dictID intentionally removed. Whatever dictionary is necessary is a hidden information.
+ *    Note : this use case also happens when using a non-conformant dictionary.
+ *  - `srcSize` is too small, and as a result, the frame header could not be decoded (only possible if `srcSize < ZSTD_FRAMEHEADERSIZE_MAX`).
+ *  - This is not a Zstandard frame.
+ *  When identifying the exact failure cause, it's possible to use ZSTD_getFrameHeader(), which will provide a more precise error code. */
+ZSTDLIB_API unsigned ZSTD_getDictID_fromFrame(const void* src, size_t srcSize);
 
-/*! ZSTD_cParam_getBounds() :
- *  All parameters must belong to an interval with lower and upper bounds,
- *  otherwise they will either trigger an error or be automatically clamped.
- * @return : a structure, ZSTD_bounds, which contains
- *         - an error status field, which must be tested using ZSTD_isError()
- *         - lower and upper bounds, both inclusive
- */
-ZSTDLIB_API ZSTD_bounds ZSTD_cParam_getBounds(ZSTD_cParameter cParam);
 
-/*! ZSTD_CCtx_setParameter() :
- *  Set one compression parameter, selected by enum ZSTD_cParameter.
- *  All parameters have valid bounds. Bounds can be queried using ZSTD_cParam_getBounds().
- *  Providing a value beyond bound will either clamp it, or trigger an error (depending on parameter).
- *  Setting a parameter is generally only possible during frame initialization (before starting compression).
- *  Exception : when using multi-threading mode (nbWorkers >= 1),
- *              the following parameters can be updated _during_ compression (within same frame):
- *              => compressionLevel, hashLog, chainLog, searchLog, minMatch, targetLength and strategy.
- *              new parameters will be active for next job only (after a flush()).
- * @return : an error code (which can be tested using ZSTD_isError()).
- */
-ZSTDLIB_API size_t ZSTD_CCtx_setParameter(ZSTD_CCtx* cctx, ZSTD_cParameter param, int value);
+/*******************************************************************************
+ * Advanced dictionary and prefix API
+ *
+ * This API allows dictionaries to be used with ZSTD_compress2(),
+ * ZSTD_compressStream2(), and ZSTD_decompress(). Dictionaries are sticky, and
+ * only reset with the context is reset with ZSTD_reset_parameters or
+ * ZSTD_reset_session_and_parameters. Prefixes are single-use.
+ ******************************************************************************/
 
-/*! ZSTD_CCtx_setPledgedSrcSize() :
- *  Total input data size to be compressed as a single frame.
- *  Value will be written in frame header, unless if explicitly forbidden using ZSTD_c_contentSizeFlag.
- *  This value will also be controlled at end of frame, and trigger an error if not respected.
- * @result : 0, or an error code (which can be tested with ZSTD_isError()).
- *  Note 1 : pledgedSrcSize==0 actually means zero, aka an empty frame.
- *           In order to mean "unknown content size", pass constant ZSTD_CONTENTSIZE_UNKNOWN.
- *           ZSTD_CONTENTSIZE_UNKNOWN is default value for any new frame.
- *  Note 2 : pledgedSrcSize is only valid once, for the next frame.
- *           It's discarded at the end of the frame, and replaced by ZSTD_CONTENTSIZE_UNKNOWN.
- *  Note 3 : Whenever all input data is provided and consumed in a single round,
- *           for example with ZSTD_compress2(),
- *           or invoking immediately ZSTD_compressStream2(,,,ZSTD_e_end),
- *           this value is automatically overriden by srcSize instead.
- */
-ZSTDLIB_API size_t ZSTD_CCtx_setPledgedSrcSize(ZSTD_CCtx* cctx, unsigned long long pledgedSrcSize);
 
 /*! ZSTD_CCtx_loadDictionary() :
  *  Create an internal CDict from `dict` buffer.
@@ -703,7 +875,9 @@ ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary(ZSTD_CCtx* cctx, const void* dict, s
 /*! ZSTD_CCtx_refCDict() :
  *  Reference a prepared dictionary, to be used for all next compressed frames.
  *  Note that compression parameters are enforced from within CDict,
- *  and supercede any compression parameter previously set within CCtx.
+ *  and supersede any compression parameter previously set within CCtx.
+ *  The parameters ignored are labled as "superseded-by-cdict" in the ZSTD_cParameter enum docs.
+ *  The ignored parameters will be used again if the CCtx is returned to no-dictionary mode.
  *  The dictionary will remain valid for future compressed frames using same CCtx.
  * @result : 0, or an error code (which can be tested with ZSTD_isError()).
  *  Special : Referencing a NULL CDict means "return to no-dictionary mode".
@@ -733,136 +907,6 @@ ZSTDLIB_API size_t ZSTD_CCtx_refCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict);
 ZSTDLIB_API size_t ZSTD_CCtx_refPrefix(ZSTD_CCtx* cctx,
                                  const void* prefix, size_t prefixSize);
 
-
-typedef enum {
-    ZSTD_reset_session_only = 1,
-    ZSTD_reset_parameters = 2,
-    ZSTD_reset_session_and_parameters = 3
-} ZSTD_ResetDirective;
-
-/*! ZSTD_CCtx_reset() :
- *  There are 2 different things that can be reset, independently or jointly :
- *  - The session : will stop compressing current frame, and make CCtx ready to start a new one.
- *                  Useful after an error, or to interrupt any ongoing compression.
- *                  Any internal data not yet flushed is cancelled.
- *                  Compression parameters and dictionary remain unchanged.
- *                  They will be used to compress next frame.
- *                  Resetting session never fails.
- *  - The parameters : changes all parameters back to "default".
- *                  This removes any reference to any dictionary too.
- *                  Parameters can only be changed between 2 sessions (i.e. no compression is currently ongoing)
- *                  otherwise the reset fails, and function returns an error value (which can be tested using ZSTD_isError())
- *  - Both : similar to resetting the session, followed by resetting parameters.
- */
-ZSTDLIB_API size_t ZSTD_CCtx_reset(ZSTD_CCtx* cctx, ZSTD_ResetDirective reset);
-
-
-
-/*! ZSTD_compress2() :
- *  Behave the same as ZSTD_compressCCtx(), but compression parameters are set using the advanced API.
- *  ZSTD_compress2() always starts a new frame.
- *  Should cctx hold data from a previously unfinished frame, everything about it is forgotten.
- *  - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*()
- *  - The function is always blocking, returns when compression is completed.
- *  Hint : compression runs faster if `dstCapacity` >=  `ZSTD_compressBound(srcSize)`.
- * @return : compressed size written into `dst` (<= `dstCapacity),
- *           or an error code if it fails (which can be tested using ZSTD_isError()).
- */
-ZSTDLIB_API size_t ZSTD_compress2( ZSTD_CCtx* cctx,
-                                   void* dst, size_t dstCapacity,
-                             const void* src, size_t srcSize);
-
-typedef enum {
-    ZSTD_e_continue=0, /* collect more data, encoder decides when to output compressed result, for optimal compression ratio */
-    ZSTD_e_flush=1,    /* flush any data provided so far,
-                        * it creates (at least) one new block, that can be decoded immediately on reception;
-                        * frame will continue: any future data can still reference previously compressed data, improving compression. */
-    ZSTD_e_end=2       /* flush any remaining data _and_ close current frame.
-                        * note that frame is only closed after compressed data is fully flushed (return value == 0).
-                        * After that point, any additional data starts a new frame.
-                        * note : each frame is independent (does not reference any content from previous frame). */
-} ZSTD_EndDirective;
-
-/*! ZSTD_compressStream2() :
- *  Behaves about the same as ZSTD_compressStream, with additional control on end directive.
- *  - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*()
- *  - Compression parameters cannot be changed once compression is started (save a list of exceptions in multi-threading mode)
- *  - outpot->pos must be <= dstCapacity, input->pos must be <= srcSize
- *  - outpot->pos and input->pos will be updated. They are guaranteed to remain below their respective limit.
- *  - When nbWorkers==0 (default), function is blocking : it completes its job before returning to caller.
- *  - When nbWorkers>=1, function is non-blocking : it just acquires a copy of input, and distributes jobs to internal worker threads, flush whatever is available,
- *                                                  and then immediately returns, just indicating that there is some data remaining to be flushed.
- *                                                  The function nonetheless guarantees forward progress : it will return only after it reads or write at least 1+ byte.
- *  - Exception : if the first call requests a ZSTD_e_end directive and provides enough dstCapacity, the function delegates to ZSTD_compress2() which is always blocking.
- *  - @return provides a minimum amount of data remaining to be flushed from internal buffers
- *            or an error code, which can be tested using ZSTD_isError().
- *            if @return != 0, flush is not fully completed, there is still some data left within internal buffers.
- *            This is useful for ZSTD_e_flush, since in this case more flushes are necessary to empty all buffers.
- *            For ZSTD_e_end, @return == 0 when internal buffers are fully flushed and frame is completed.
- *  - after a ZSTD_e_end directive, if internal buffer is not fully flushed (@return != 0),
- *            only ZSTD_e_end or ZSTD_e_flush operations are allowed.
- *            Before starting a new compression job, or changing compression parameters,
- *            it is required to fully flush internal buffers.
- */
-ZSTDLIB_API size_t ZSTD_compressStream2( ZSTD_CCtx* cctx,
-                                         ZSTD_outBuffer* output,
-                                         ZSTD_inBuffer* input,
-                                         ZSTD_EndDirective endOp);
-
-
-
-/* ============================== */
-/*   Advanced decompression API   */
-/* ============================== */
-
-/* The advanced API pushes parameters one by one into an existing DCtx context.
- * Parameters are sticky, and remain valid for all following frames
- * using the same DCtx context.
- * It's possible to reset parameters to default values using ZSTD_DCtx_reset().
- * Note : This API is compatible with existing ZSTD_decompressDCtx() and ZSTD_decompressStream().
- *        Therefore, no new decompression function is necessary.
- */
-
-
-typedef enum {
-
-    ZSTD_d_windowLogMax=100, /* Select a size limit (in power of 2) beyond which
-                              * the streaming API will refuse to allocate memory buffer
-                              * in order to protect the host from unreasonable memory requirements.
-                              * This parameter is only useful in streaming mode, since no internal buffer is allocated in single-pass mode.
-                              * By default, a decompression context accepts window sizes <= (1 << ZSTD_WINDOWLOG_LIMIT_DEFAULT) */
-
-    /* note : additional experimental parameters are also available
-     * within the experimental section of the API.
-     * At the time of this writing, they include :
-     * ZSTD_c_format
-     * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them.
-     * note : never ever use experimentalParam? names directly
-     */
-     ZSTD_d_experimentalParam1=1000
-
-} ZSTD_dParameter;
-
-
-/*! ZSTD_dParam_getBounds() :
- *  All parameters must belong to an interval with lower and upper bounds,
- *  otherwise they will either trigger an error or be automatically clamped.
- * @return : a structure, ZSTD_bounds, which contains
- *         - an error status field, which must be tested using ZSTD_isError()
- *         - both lower and upper bounds, inclusive
- */
-ZSTDLIB_API ZSTD_bounds ZSTD_dParam_getBounds(ZSTD_dParameter dParam);
-
-/*! ZSTD_DCtx_setParameter() :
- *  Set one compression parameter, selected by enum ZSTD_dParameter.
- *  All parameters have valid bounds. Bounds can be queried using ZSTD_dParam_getBounds().
- *  Providing a value beyond bound will either clamp it, or trigger an error (depending on parameter).
- *  Setting a parameter is only possible during frame initialization (before starting decompression).
- * @return : 0, or an error code (which can be tested using ZSTD_isError()).
- */
-ZSTDLIB_API size_t ZSTD_DCtx_setParameter(ZSTD_DCtx* dctx, ZSTD_dParameter param, int value);
-
-
 /*! ZSTD_DCtx_loadDictionary() :
  *  Create an internal DDict from dict buffer,
  *  to be used to decompress next frames.
@@ -910,15 +954,32 @@ ZSTDLIB_API size_t ZSTD_DCtx_refDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict);
 ZSTDLIB_API size_t ZSTD_DCtx_refPrefix(ZSTD_DCtx* dctx,
                                  const void* prefix, size_t prefixSize);
 
-/*! ZSTD_DCtx_reset() :
- *  Return a DCtx to clean state.
- *  Session and parameters can be reset jointly or separately.
- *  Parameters can only be reset when no active frame is being decompressed.
- * @return : 0, or an error code, which can be tested with ZSTD_isError()
- */
-ZSTDLIB_API size_t ZSTD_DCtx_reset(ZSTD_DCtx* dctx, ZSTD_ResetDirective reset);
+/* ===   Memory management   === */
+
+/*! ZSTD_sizeof_*() :
+ *  These functions give the _current_ memory usage of selected object.
+ *  Note that object memory usage can evolve (increase or decrease) over time. */
+ZSTDLIB_API size_t ZSTD_sizeof_CCtx(const ZSTD_CCtx* cctx);
+ZSTDLIB_API size_t ZSTD_sizeof_DCtx(const ZSTD_DCtx* dctx);
+ZSTDLIB_API size_t ZSTD_sizeof_CStream(const ZSTD_CStream* zcs);
+ZSTDLIB_API size_t ZSTD_sizeof_DStream(const ZSTD_DStream* zds);
+ZSTDLIB_API size_t ZSTD_sizeof_CDict(const ZSTD_CDict* cdict);
+ZSTDLIB_API size_t ZSTD_sizeof_DDict(const ZSTD_DDict* ddict);
+
+#endif  /* ZSTD_H_235446 */
+
 
+/****************************************************************************************
+ *   ADVANCED AND EXPERIMENTAL FUNCTIONS
+ ****************************************************************************************
+ * The definitions in the following section are considered experimental.
+ * They are provided for advanced scenarios.
+ * They should never be used with a dynamic library, as prototypes may change in the future.
+ * Use them only in association with static linking.
+ * ***************************************************************************************/
 
+#if defined(ZSTD_STATIC_LINKING_ONLY) && !defined(ZSTD_H_ZSTD_STATIC_LINKING_ONLY)
+#define ZSTD_H_ZSTD_STATIC_LINKING_ONLY
 
 /****************************************************************************************
  *   experimental API (static linking only)
@@ -962,7 +1023,7 @@ ZSTDLIB_API size_t ZSTD_DCtx_reset(ZSTD_DCtx* dctx, ZSTD_ResetDirective reset);
 #define ZSTD_WINDOWLOG_LIMIT_DEFAULT 27   /* by default, the streaming decoder will refuse any frame
                                            * requiring larger than (1<<ZSTD_WINDOWLOG_LIMIT_DEFAULT) window size,
                                            * to preserve host's memory from unreasonable requirements.
-                                           * This limit can be overriden using ZSTD_DCtx_setParameter(,ZSTD_d_windowLogMax,).
+                                           * This limit can be overridden using ZSTD_DCtx_setParameter(,ZSTD_d_windowLogMax,).
                                            * The limit does not apply for one-pass decoders (such as ZSTD_decompress()), since no additional memory is allocated */
 
 
@@ -1064,15 +1125,24 @@ typedef enum {
     ZSTD_dictForceCopy     = 2, /* Always copy the dictionary. */
 } ZSTD_dictAttachPref_e;
 
+typedef enum {
+  ZSTD_lcm_auto = 0,          /**< Automatically determine the compression mode based on the compression level.
+                               *   Negative compression levels will be uncompressed, and positive compression
+                               *   levels will be compressed. */
+  ZSTD_lcm_huffman = 1,       /**< Always attempt Huffman compression. Uncompressed literals will still be
+                               *   emitted if Huffman compression is not profitable. */
+  ZSTD_lcm_uncompressed = 2,  /**< Always emit uncompressed literals. */
+} ZSTD_literalCompressionMode_e;
+
 
 /***************************************
 *  Frame size functions
 ***************************************/
 
 /*! ZSTD_findDecompressedSize() :
- *  `src` should point the start of a series of ZSTD encoded and/or skippable frames
+ *  `src` should point to the start of a series of ZSTD encoded and/or skippable frames
  *  `srcSize` must be the _exact_ size of this series
- *       (i.e. there should be a frame boundary exactly at `srcSize` bytes after `src`)
+ *       (i.e. there should be a frame boundary at `src + srcSize`)
  *  @return : - decompressed size of all data in all successive frames
  *            - if the decompressed size cannot be determined: ZSTD_CONTENTSIZE_UNKNOWN
  *            - if an error occurred: ZSTD_CONTENTSIZE_ERROR
@@ -1092,6 +1162,21 @@ typedef enum {
  *            however it does mean that all frame data must be present and valid. */
 ZSTDLIB_API unsigned long long ZSTD_findDecompressedSize(const void* src, size_t srcSize);
 
+/** ZSTD_decompressBound() :
+ *  `src` should point to the start of a series of ZSTD encoded and/or skippable frames
+ *  `srcSize` must be the _exact_ size of this series
+ *       (i.e. there should be a frame boundary at `src + srcSize`)
+ *  @return : - upper-bound for the decompressed size of all data in all successive frames
+ *            - if an error occured: ZSTD_CONTENTSIZE_ERROR
+ *
+ *  note 1  : an error can occur if `src` contains an invalid or incorrectly formatted frame.
+ *  note 2  : the upper-bound is exact when the decompressed size field is available in every ZSTD encoded frame of `src`.
+ *            in this case, `ZSTD_findDecompressedSize` and `ZSTD_decompressBound` return the same value.
+ *  note 3  : when the decompressed size field isn't available, the upper-bound for that frame is calculated by:
+ *              upper-bound = # blocks * min(128 KB, Window_Size)
+ */
+ZSTDLIB_API unsigned long long ZSTD_decompressBound(const void* src, size_t srcSize);
+
 /*! ZSTD_frameHeaderSize() :
  *  srcSize must be >= ZSTD_FRAMEHEADERSIZE_PREFIX.
  * @return : size of the Frame Header,
@@ -1110,7 +1195,7 @@ ZSTDLIB_API size_t ZSTD_frameHeaderSize(const void* src, size_t srcSize);
  *  It will also consider src size to be arbitrarily "large", which is worst case.
  *  If srcSize is known to always be small, ZSTD_estimateCCtxSize_usingCParams() can provide a tighter estimation.
  *  ZSTD_estimateCCtxSize_usingCParams() can be used in tandem with ZSTD_getCParams() to create cParams from compressionLevel.
- *  ZSTD_estimateCCtxSize_usingCCtxParams() can be used in tandem with ZSTD_CCtxParam_setParameter(). Only single-threaded compression is supported. This function will return an error code if ZSTD_c_nbWorkers is >= 1.
+ *  ZSTD_estimateCCtxSize_usingCCtxParams() can be used in tandem with ZSTD_CCtxParams_setParameter(). Only single-threaded compression is supported. This function will return an error code if ZSTD_c_nbWorkers is >= 1.
  *  Note : CCtx size estimation is only correct for single-threaded compression. */
 ZSTDLIB_API size_t ZSTD_estimateCCtxSize(int compressionLevel);
 ZSTDLIB_API size_t ZSTD_estimateCCtxSize_usingCParams(ZSTD_compressionParameters cParams);
@@ -1122,7 +1207,7 @@ ZSTDLIB_API size_t ZSTD_estimateDCtxSize(void);
  *  It will also consider src size to be arbitrarily "large", which is worst case.
  *  If srcSize is known to always be small, ZSTD_estimateCStreamSize_usingCParams() can provide a tighter estimation.
  *  ZSTD_estimateCStreamSize_usingCParams() can be used in tandem with ZSTD_getCParams() to create cParams from compressionLevel.
- *  ZSTD_estimateCStreamSize_usingCCtxParams() can be used in tandem with ZSTD_CCtxParam_setParameter(). Only single-threaded compression is supported. This function will return an error code if ZSTD_c_nbWorkers is >= 1.
+ *  ZSTD_estimateCStreamSize_usingCCtxParams() can be used in tandem with ZSTD_CCtxParams_setParameter(). Only single-threaded compression is supported. This function will return an error code if ZSTD_c_nbWorkers is >= 1.
  *  Note : CStream size estimation is only correct for single-threaded compression.
  *  ZSTD_DStream memory budget depends on window Size.
  *  This information can be passed manually, using ZSTD_estimateDStreamSize,
@@ -1226,22 +1311,26 @@ ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict_advanced(const void* dict, size_t dictS
 ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict_byReference(const void* dictBuffer, size_t dictSize, int compressionLevel);
 
 /*! ZSTD_getCParams() :
-*   @return ZSTD_compressionParameters structure for a selected compression level and estimated srcSize.
-*   `estimatedSrcSize` value is optional, select 0 if not known */
+ * @return ZSTD_compressionParameters structure for a selected compression level and estimated srcSize.
+ * `estimatedSrcSize` value is optional, select 0 if not known */
 ZSTDLIB_API ZSTD_compressionParameters ZSTD_getCParams(int compressionLevel, unsigned long long estimatedSrcSize, size_t dictSize);
 
 /*! ZSTD_getParams() :
-*   same as ZSTD_getCParams(), but @return a full `ZSTD_parameters` object instead of sub-component `ZSTD_compressionParameters`.
-*   All fields of `ZSTD_frameParameters` are set to default : contentSize=1, checksum=0, noDictID=0 */
+ *  same as ZSTD_getCParams(), but @return a full `ZSTD_parameters` object instead of sub-component `ZSTD_compressionParameters`.
+ *  All fields of `ZSTD_frameParameters` are set to default : contentSize=1, checksum=0, noDictID=0 */
 ZSTDLIB_API ZSTD_parameters ZSTD_getParams(int compressionLevel, unsigned long long estimatedSrcSize, size_t dictSize);
 
 /*! ZSTD_checkCParams() :
-*   Ensure param values remain within authorized range */
+ *  Ensure param values remain within authorized range.
+ * @return 0 on success, or an error code (can be checked with ZSTD_isError()) */
 ZSTDLIB_API size_t ZSTD_checkCParams(ZSTD_compressionParameters params);
 
 /*! ZSTD_adjustCParams() :
  *  optimize params for a given `srcSize` and `dictSize`.
- *  both values are optional, select `0` if unknown. */
+ * `srcSize` can be unknown, in which case use ZSTD_CONTENTSIZE_UNKNOWN.
+ * `dictSize` must be `0` when there is no dictionary.
+ *  cPar can be invalid : all parameters will be clamped within valid range in the @return struct.
+ *  This function never fails (wide contract) */
 ZSTDLIB_API ZSTD_compressionParameters ZSTD_adjustCParams(ZSTD_compressionParameters cPar, unsigned long long srcSize, size_t dictSize);
 
 /*! ZSTD_compress_advanced() :
@@ -1314,6 +1403,12 @@ ZSTDLIB_API size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx, const void* pre
  * See the comments on that enum for an explanation of the feature. */
 #define ZSTD_c_forceAttachDict ZSTD_c_experimentalParam4
 
+/* Controls how the literals are compressed (default is auto).
+ * The value must be of type ZSTD_literalCompressionMode_e.
+ * See ZSTD_literalCompressionMode_t enum definition for details.
+ */
+#define ZSTD_c_literalCompressionMode ZSTD_c_experimentalParam5
+
 /*! ZSTD_CCtx_getParameter() :
  *  Get the requested compression parameter value, selected by enum ZSTD_cParameter,
  *  and store it into int* value.
@@ -1325,10 +1420,10 @@ ZSTDLIB_API size_t ZSTD_CCtx_getParameter(ZSTD_CCtx* cctx, ZSTD_cParameter param
 /*! ZSTD_CCtx_params :
  *  Quick howto :
  *  - ZSTD_createCCtxParams() : Create a ZSTD_CCtx_params structure
- *  - ZSTD_CCtxParam_setParameter() : Push parameters one by one into
- *                                    an existing ZSTD_CCtx_params structure.
- *                                    This is similar to
- *                                    ZSTD_CCtx_setParameter().
+ *  - ZSTD_CCtxParams_setParameter() : Push parameters one by one into
+ *                                     an existing ZSTD_CCtx_params structure.
+ *                                     This is similar to
+ *                                     ZSTD_CCtx_setParameter().
  *  - ZSTD_CCtx_setParametersUsingCCtxParams() : Apply parameters to
  *                                    an existing CCtx.
  *                                    These parameters will be applied to
@@ -1359,20 +1454,20 @@ ZSTDLIB_API size_t ZSTD_CCtxParams_init(ZSTD_CCtx_params* cctxParams, int compre
  */
 ZSTDLIB_API size_t ZSTD_CCtxParams_init_advanced(ZSTD_CCtx_params* cctxParams, ZSTD_parameters params);
 
-/*! ZSTD_CCtxParam_setParameter() :
+/*! ZSTD_CCtxParams_setParameter() :
  *  Similar to ZSTD_CCtx_setParameter.
  *  Set one compression parameter, selected by enum ZSTD_cParameter.
  *  Parameters must be applied to a ZSTD_CCtx using ZSTD_CCtx_setParametersUsingCCtxParams().
  * @result : 0, or an error code (which can be tested with ZSTD_isError()).
  */
-ZSTDLIB_API size_t ZSTD_CCtxParam_setParameter(ZSTD_CCtx_params* params, ZSTD_cParameter param, int value);
+ZSTDLIB_API size_t ZSTD_CCtxParams_setParameter(ZSTD_CCtx_params* params, ZSTD_cParameter param, int value);
 
-/*! ZSTD_CCtxParam_getParameter() :
+/*! ZSTD_CCtxParams_getParameter() :
  * Similar to ZSTD_CCtx_getParameter.
  * Get the requested value of one compression parameter, selected by enum ZSTD_cParameter.
  * @result : 0, or an error code (which can be tested with ZSTD_isError()).
  */
-ZSTDLIB_API size_t ZSTD_CCtxParam_getParameter(ZSTD_CCtx_params* params, ZSTD_cParameter param, int* value);
+ZSTDLIB_API size_t ZSTD_CCtxParams_getParameter(ZSTD_CCtx_params* params, ZSTD_cParameter param, int* value);
 
 /*! ZSTD_CCtx_setParametersUsingCCtxParams() :
  *  Apply a set of ZSTD_CCtx_params to the compression context.
@@ -1415,31 +1510,6 @@ ZSTDLIB_API unsigned ZSTD_isFrame(const void* buffer, size_t size);
  *  it must remain read accessible throughout the lifetime of DDict */
 ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict_byReference(const void* dictBuffer, size_t dictSize);
 
-
-/*! ZSTD_getDictID_fromDict() :
- *  Provides the dictID stored within dictionary.
- *  if @return == 0, the dictionary is not conformant with Zstandard specification.
- *  It can still be loaded, but as a content-only dictionary. */
-ZSTDLIB_API unsigned ZSTD_getDictID_fromDict(const void* dict, size_t dictSize);
-
-/*! ZSTD_getDictID_fromDDict() :
- *  Provides the dictID of the dictionary loaded into `ddict`.
- *  If @return == 0, the dictionary is not conformant to Zstandard specification, or empty.
- *  Non-conformant dictionaries can still be loaded, but as content-only dictionaries. */
-ZSTDLIB_API unsigned ZSTD_getDictID_fromDDict(const ZSTD_DDict* ddict);
-
-/*! ZSTD_getDictID_fromFrame() :
- *  Provides the dictID required to decompressed the frame stored within `src`.
- *  If @return == 0, the dictID could not be decoded.
- *  This could for one of the following reasons :
- *  - The frame does not require a dictionary to be decoded (most common case).
- *  - The frame was built with dictID intentionally removed. Whatever dictionary is necessary is a hidden information.
- *    Note : this use case also happens when using a non-conformant dictionary.
- *  - `srcSize` is too small, and as a result, the frame header could not be decoded (only possible if `srcSize < ZSTD_FRAMEHEADERSIZE_MAX`).
- *  - This is not a Zstandard frame.
- *  When identifying the exact failure cause, it's possible to use ZSTD_getFrameHeader(), which will provide a more precise error code. */
-ZSTDLIB_API unsigned ZSTD_getDictID_fromFrame(const void* src, size_t srcSize);
-
 /*! ZSTD_DCtx_loadDictionary_byReference() :
  *  Same as ZSTD_DCtx_loadDictionary(),
  *  but references `dict` content instead of copying it into `dctx`.
@@ -1501,14 +1571,68 @@ ZSTDLIB_API size_t ZSTD_decompressStream_simpleArgs (
 ********************************************************************/
 
 /*=====   Advanced Streaming compression functions  =====*/
-ZSTDLIB_API size_t ZSTD_initCStream_srcSize(ZSTD_CStream* zcs, int compressionLevel, unsigned long long pledgedSrcSize);   /**< pledgedSrcSize must be correct. If it is not known at init time, use ZSTD_CONTENTSIZE_UNKNOWN. Note that, for compatibility with older programs, "0" also disables frame content size field. It may be enabled in the future. */
-ZSTDLIB_API size_t ZSTD_initCStream_usingDict(ZSTD_CStream* zcs, const void* dict, size_t dictSize, int compressionLevel); /**< creates of an internal CDict (incompatible with static CCtx), except if dict == NULL or dictSize < 8, in which case no dict is used. Note: dict is loaded with ZSTD_dm_auto (treated as a full zstd dictionary if it begins with ZSTD_MAGIC_DICTIONARY, else as raw content) and ZSTD_dlm_byCopy.*/
+/**! ZSTD_initCStream_srcSize() :
+ * This function is deprecated, and equivalent to:
+ *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ *     ZSTD_CCtx_refCDict(zcs, NULL); // clear the dictionary (if any)
+ *     ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel);
+ *     ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize);
+ *
+ * pledgedSrcSize must be correct. If it is not known at init time, use
+ * ZSTD_CONTENTSIZE_UNKNOWN. Note that, for compatibility with older programs,
+ * "0" also disables frame content size field. It may be enabled in the future.
+ */
+ZSTDLIB_API size_t ZSTD_initCStream_srcSize(ZSTD_CStream* zcs, int compressionLevel, unsigned long long pledgedSrcSize);
+/**! ZSTD_initCStream_usingDict() :
+ * This function is deprecated, and is equivalent to:
+ *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ *     ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel);
+ *     ZSTD_CCtx_loadDictionary(zcs, dict, dictSize);
+ *
+ * Creates of an internal CDict (incompatible with static CCtx), except if
+ * dict == NULL or dictSize < 8, in which case no dict is used.
+ * Note: dict is loaded with ZSTD_dm_auto (treated as a full zstd dictionary if
+ * it begins with ZSTD_MAGIC_DICTIONARY, else as raw content) and ZSTD_dlm_byCopy.
+ */
+ZSTDLIB_API size_t ZSTD_initCStream_usingDict(ZSTD_CStream* zcs, const void* dict, size_t dictSize, int compressionLevel);
+/**! ZSTD_initCStream_advanced() :
+ * This function is deprecated, and is approximately equivalent to:
+ *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ *     ZSTD_CCtx_setZstdParams(zcs, params); // Set the zstd params and leave the rest as-is
+ *     ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize);
+ *     ZSTD_CCtx_loadDictionary(zcs, dict, dictSize);
+ *
+ * pledgedSrcSize must be correct. If srcSize is not known at init time, use
+ * value ZSTD_CONTENTSIZE_UNKNOWN. dict is loaded with ZSTD_dm_auto and ZSTD_dlm_byCopy.
+ */
 ZSTDLIB_API size_t ZSTD_initCStream_advanced(ZSTD_CStream* zcs, const void* dict, size_t dictSize,
-                                             ZSTD_parameters params, unsigned long long pledgedSrcSize);  /**< pledgedSrcSize must be correct. If srcSize is not known at init time, use value ZSTD_CONTENTSIZE_UNKNOWN. dict is loaded with ZSTD_dm_auto and ZSTD_dlm_byCopy. */
-ZSTDLIB_API size_t ZSTD_initCStream_usingCDict(ZSTD_CStream* zcs, const ZSTD_CDict* cdict);  /**< note : cdict will just be referenced, and must outlive compression session */
-ZSTDLIB_API size_t ZSTD_initCStream_usingCDict_advanced(ZSTD_CStream* zcs, const ZSTD_CDict* cdict, ZSTD_frameParameters fParams, unsigned long long pledgedSrcSize);  /**< same as ZSTD_initCStream_usingCDict(), with control over frame parameters. pledgedSrcSize must be correct. If srcSize is not known at init time, use value ZSTD_CONTENTSIZE_UNKNOWN. */
+                                             ZSTD_parameters params, unsigned long long pledgedSrcSize);
+/**! ZSTD_initCStream_usingCDict() :
+ * This function is deprecated, and equivalent to:
+ *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ *     ZSTD_CCtx_refCDict(zcs, cdict);
+ *
+ * note : cdict will just be referenced, and must outlive compression session
+ */
+ZSTDLIB_API size_t ZSTD_initCStream_usingCDict(ZSTD_CStream* zcs, const ZSTD_CDict* cdict);
+/**! ZSTD_initCStream_usingCDict_advanced() :
+ * This function is deprecated, and is approximately equivalent to:
+ *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ *     ZSTD_CCtx_setZstdFrameParams(zcs, fParams); // Set the zstd frame params and leave the rest as-is
+ *     ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize);
+ *     ZSTD_CCtx_refCDict(zcs, cdict);
+ *
+ * same as ZSTD_initCStream_usingCDict(), with control over frame parameters.
+ * pledgedSrcSize must be correct. If srcSize is not known at init time, use
+ * value ZSTD_CONTENTSIZE_UNKNOWN.
+ */
+ZSTDLIB_API size_t ZSTD_initCStream_usingCDict_advanced(ZSTD_CStream* zcs, const ZSTD_CDict* cdict, ZSTD_frameParameters fParams, unsigned long long pledgedSrcSize);
 
 /*! ZSTD_resetCStream() :
+ * This function is deprecated, and is equivalent to:
+ *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ *     ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize);
+ *
  *  start a new frame, using same parameters from previous frame.
  *  This is typically useful to skip dictionary loading stage, since it will re-use it in-place.
  *  Note that zcs must be init at least once before using ZSTD_resetCStream().
@@ -1555,9 +1679,32 @@ ZSTDLIB_API size_t ZSTD_toFlushNow(ZSTD_CCtx* cctx);
 
 
 /*=====   Advanced Streaming decompression functions  =====*/
-ZSTDLIB_API size_t ZSTD_initDStream_usingDict(ZSTD_DStream* zds, const void* dict, size_t dictSize); /**< note: no dictionary will be used if dict == NULL or dictSize < 8 */
-ZSTDLIB_API size_t ZSTD_initDStream_usingDDict(ZSTD_DStream* zds, const ZSTD_DDict* ddict);  /**< note : ddict is referenced, it must outlive decompression session */
-ZSTDLIB_API size_t ZSTD_resetDStream(ZSTD_DStream* zds);  /**< re-use decompression parameters from previous init; saves dictionary loading */
+/**
+ * This function is deprecated, and is equivalent to:
+ *
+ *     ZSTD_DCtx_reset(zds, ZSTD_reset_session_only);
+ *     ZSTD_DCtx_loadDictionary(zds, dict, dictSize);
+ *
+ * note: no dictionary will be used if dict == NULL or dictSize < 8
+ */
+ZSTDLIB_API size_t ZSTD_initDStream_usingDict(ZSTD_DStream* zds, const void* dict, size_t dictSize);
+/**
+ * This function is deprecated, and is equivalent to:
+ *
+ *     ZSTD_DCtx_reset(zds, ZSTD_reset_session_only);
+ *     ZSTD_DCtx_refDDict(zds, ddict);
+ *
+ * note : ddict is referenced, it must outlive decompression session
+ */
+ZSTDLIB_API size_t ZSTD_initDStream_usingDDict(ZSTD_DStream* zds, const ZSTD_DDict* ddict);
+/**
+ * This function is deprecated, and is equivalent to:
+ *
+ *     ZSTD_DCtx_reset(zds, ZSTD_reset_session_only);
+ *
+ * re-use decompression parameters from previous init; saves dictionary loading
+ */
+ZSTDLIB_API size_t ZSTD_resetDStream(ZSTD_DStream* zds);
 
 
 /*********************************************************************