zstd-ruby 1.4.5.0 → 1.5.5.0

data/ext/zstdruby/libzstd/compress/zstdmt_compress.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016-2020, Yann Collet, Facebook, Inc.
+ * Copyright (c) Meta Platforms, Inc. and affiliates.
  * All rights reserved.
  *
  * This source code is licensed under both the BSD-style license (found in the
@@ -19,113 +19,60 @@
 /* Note : This is an internal API.
  *        These APIs used to be exposed with ZSTDLIB_API,
  *        because it used to be the only way to invoke MT compression.
- *        Now, it's recommended to use ZSTD_compress2 and ZSTD_compressStream2()
- *        instead.
- *
- *        If you depend on these APIs and can't switch, then define
- *        ZSTD_LEGACY_MULTITHREADED_API when making the dynamic library.
- *        However, we may completely remove these functions in a future
- *        release, so please switch soon.
+ *        Now, you must use ZSTD_compress2 and ZSTD_compressStream2() instead.
  *
  *        This API requires ZSTD_MULTITHREAD to be defined during compilation,
  *        otherwise ZSTDMT_createCCtx*() will fail.
  */
 
-#ifdef ZSTD_LEGACY_MULTITHREADED_API
-#  define ZSTDMT_API ZSTDLIB_API
-#else
-#  define ZSTDMT_API
-#endif
-
 /* ===   Dependencies   === */
-#include <stddef.h>                /* size_t */
+#include "../common/zstd_deps.h"   /* size_t */
 #define ZSTD_STATIC_LINKING_ONLY   /* ZSTD_parameters */
 #include "../zstd.h"            /* ZSTD_inBuffer, ZSTD_outBuffer, ZSTDLIB_API */
 
 
 /* ===   Constants   === */
-#ifndef ZSTDMT_NBWORKERS_MAX
-#  define ZSTDMT_NBWORKERS_MAX 200
+#ifndef ZSTDMT_NBWORKERS_MAX /* a different value can be selected at compile time */
+#  define ZSTDMT_NBWORKERS_MAX ((sizeof(void*)==4) /*32-bit*/ ? 64 : 256)
 #endif
-#ifndef ZSTDMT_JOBSIZE_MIN
-#  define ZSTDMT_JOBSIZE_MIN (1 MB)
+#ifndef ZSTDMT_JOBSIZE_MIN   /* a different value can be selected at compile time */
+#  define ZSTDMT_JOBSIZE_MIN (512 KB)
 #endif
 #define ZSTDMT_JOBLOG_MAX   (MEM_32bits() ? 29 : 30)
 #define ZSTDMT_JOBSIZE_MAX  (MEM_32bits() ? (512 MB) : (1024 MB))
 
 
+/* ========================================================
+ * ===  Private interface, for use by ZSTD_compress.c   ===
+ * ===  Not exposed in libzstd. Never invoke directly   ===
+ * ======================================================== */
+
 /* ===   Memory management   === */
 typedef struct ZSTDMT_CCtx_s ZSTDMT_CCtx;
 /* Requires ZSTD_MULTITHREAD to be defined during compilation, otherwise it will return NULL. */
-ZSTDMT_API ZSTDMT_CCtx* ZSTDMT_createCCtx(unsigned nbWorkers);
-/* Requires ZSTD_MULTITHREAD to be defined during compilation, otherwise it will return NULL. */
-ZSTDMT_API ZSTDMT_CCtx* ZSTDMT_createCCtx_advanced(unsigned nbWorkers,
-                                                    ZSTD_customMem cMem);
-ZSTDMT_API size_t ZSTDMT_freeCCtx(ZSTDMT_CCtx* mtctx);
-
-ZSTDMT_API size_t ZSTDMT_sizeof_CCtx(ZSTDMT_CCtx* mtctx);
-
-
-/* ===   Simple one-pass compression function   === */
-
-ZSTDMT_API size_t ZSTDMT_compressCCtx(ZSTDMT_CCtx* mtctx,
-                                       void* dst, size_t dstCapacity,
-                                 const void* src, size_t srcSize,
-                                       int compressionLevel);
-
+ZSTDMT_CCtx* ZSTDMT_createCCtx_advanced(unsigned nbWorkers,
+                                        ZSTD_customMem cMem,
+					ZSTD_threadPool *pool);
+size_t ZSTDMT_freeCCtx(ZSTDMT_CCtx* mtctx);
 
+size_t ZSTDMT_sizeof_CCtx(ZSTDMT_CCtx* mtctx);
 
 /* ===   Streaming functions   === */
 
-ZSTDMT_API size_t ZSTDMT_initCStream(ZSTDMT_CCtx* mtctx, int compressionLevel);
-ZSTDMT_API size_t ZSTDMT_resetCStream(ZSTDMT_CCtx* mtctx, unsigned long long pledgedSrcSize);  /**< if srcSize is not known at reset time, use ZSTD_CONTENTSIZE_UNKNOWN. Note: for compatibility with older programs, 0 means the same as ZSTD_CONTENTSIZE_UNKNOWN, but it will change in the future to mean "empty" */
-
-ZSTDMT_API size_t ZSTDMT_nextInputSizeHint(const ZSTDMT_CCtx* mtctx);
-ZSTDMT_API size_t ZSTDMT_compressStream(ZSTDMT_CCtx* mtctx, ZSTD_outBuffer* output, ZSTD_inBuffer* input);
-
-ZSTDMT_API size_t ZSTDMT_flushStream(ZSTDMT_CCtx* mtctx, ZSTD_outBuffer* output);   /**< @return : 0 == all flushed; >0 : still some data to be flushed; or an error code (ZSTD_isError()) */
-ZSTDMT_API size_t ZSTDMT_endStream(ZSTDMT_CCtx* mtctx, ZSTD_outBuffer* output);     /**< @return : 0 == all flushed; >0 : still some data to be flushed; or an error code (ZSTD_isError()) */
-
-
-/* ===   Advanced functions and parameters  === */
-
-ZSTDMT_API size_t ZSTDMT_compress_advanced(ZSTDMT_CCtx* mtctx,
-                                          void* dst, size_t dstCapacity,
-                                    const void* src, size_t srcSize,
-                                    const ZSTD_CDict* cdict,
-                                          ZSTD_parameters params,
-                                          int overlapLog);
-
-ZSTDMT_API size_t ZSTDMT_initCStream_advanced(ZSTDMT_CCtx* mtctx,
-                                        const void* dict, size_t dictSize,   /* dict can be released after init, a local copy is preserved within zcs */
-                                        ZSTD_parameters params,
-                                        unsigned long long pledgedSrcSize);  /* pledgedSrcSize is optional and can be zero == unknown */
-
-ZSTDMT_API size_t ZSTDMT_initCStream_usingCDict(ZSTDMT_CCtx* mtctx,
-                                        const ZSTD_CDict* cdict,
-                                        ZSTD_frameParameters fparams,
-                                        unsigned long long pledgedSrcSize);  /* note : zero means empty */
-
-/* ZSTDMT_parameter :
- * List of parameters that can be set using ZSTDMT_setMTCtxParameter() */
-typedef enum {
-    ZSTDMT_p_jobSize,     /* Each job is compressed in parallel. By default, this value is dynamically determined depending on compression parameters. Can be set explicitly here. */
-    ZSTDMT_p_overlapLog,  /* Each job may reload a part of previous job to enhance compression ratio; 0 == no overlap, 6(default) == use 1/8th of window, >=9 == use full window. This is a "sticky" parameter : its value will be re-used on next compression job */
-    ZSTDMT_p_rsyncable    /* Enables rsyncable mode. */
-} ZSTDMT_parameter;
-
-/* ZSTDMT_setMTCtxParameter() :
- * allow setting individual parameters, one at a time, among a list of enums defined in ZSTDMT_parameter.
- * The function must be called typically after ZSTD_createCCtx() but __before ZSTDMT_init*() !__
- * Parameters not explicitly reset by ZSTDMT_init*() remain the same in consecutive compression sessions.
- * @return : 0, or an error code (which can be tested using ZSTD_isError()) */
-ZSTDMT_API size_t ZSTDMT_setMTCtxParameter(ZSTDMT_CCtx* mtctx, ZSTDMT_parameter parameter, int value);
-
-/* ZSTDMT_getMTCtxParameter() :
- * Query the ZSTDMT_CCtx for a parameter value.
- * @return : 0, or an error code (which can be tested using ZSTD_isError()) */
-ZSTDMT_API size_t ZSTDMT_getMTCtxParameter(ZSTDMT_CCtx* mtctx, ZSTDMT_parameter parameter, int* value);
+size_t ZSTDMT_nextInputSizeHint(const ZSTDMT_CCtx* mtctx);
 
+/*! ZSTDMT_initCStream_internal() :
+ *  Private use only. Init streaming operation.
+ *  expects params to be valid.
+ *  must receive dict, or cdict, or none, but not both.
+ *  mtctx can be freshly constructed or reused from a prior compression.
+ *  If mtctx is reused, memory allocations from the prior compression may not be freed,
+ *  even if they are not needed for the current compression.
+ *  @return : 0, or an error code */
+size_t ZSTDMT_initCStream_internal(ZSTDMT_CCtx* mtctx,
+                    const void* dict, size_t dictSize, ZSTD_dictContentType_e dictContentType,
+                    const ZSTD_CDict* cdict,
+                    ZSTD_CCtx_params params, unsigned long long pledgedSrcSize);
 
 /*! ZSTDMT_compressStream_generic() :
  *  Combines ZSTDMT_compressStream() with optional ZSTDMT_flushStream() or ZSTDMT_endStream()
@@ -134,16 +81,10 @@ ZSTDMT_API size_t ZSTDMT_getMTCtxParameter(ZSTDMT_CCtx* mtctx, ZSTDMT_parameter
  *           0 if fully flushed
  *           or an error code
  *  note : needs to be init using any ZSTD_initCStream*() variant */
-ZSTDMT_API size_t ZSTDMT_compressStream_generic(ZSTDMT_CCtx* mtctx,
-                                                ZSTD_outBuffer* output,
-                                                ZSTD_inBuffer* input,
-                                                ZSTD_EndDirective endOp);
-
-
-/* ========================================================
- * ===  Private interface, for use by ZSTD_compress.c   ===
- * ===  Not exposed in libzstd. Never invoke directly   ===
- * ======================================================== */
+size_t ZSTDMT_compressStream_generic(ZSTDMT_CCtx* mtctx,
+                                     ZSTD_outBuffer* output,
+                                     ZSTD_inBuffer* input,
+                                     ZSTD_EndDirective endOp);
 
  /*! ZSTDMT_toFlushNow()
   *  Tell how many bytes are ready to be flushed immediately.
@@ -153,15 +94,6 @@ ZSTDMT_API size_t ZSTDMT_compressStream_generic(ZSTDMT_CCtx* mtctx,
   *  therefore flushing is limited by speed of oldest job. */
 size_t ZSTDMT_toFlushNow(ZSTDMT_CCtx* mtctx);
 
-/*! ZSTDMT_CCtxParam_setMTCtxParameter()
- *  like ZSTDMT_setMTCtxParameter(), but into a ZSTD_CCtx_Params */
-size_t ZSTDMT_CCtxParam_setMTCtxParameter(ZSTD_CCtx_params* params, ZSTDMT_parameter parameter, int value);
-
-/*! ZSTDMT_CCtxParam_setNbWorkers()
- *  Set nbWorkers, and clamp it.
- *  Also reset jobSize and overlapLog */
-size_t ZSTDMT_CCtxParam_setNbWorkers(ZSTD_CCtx_params* params, unsigned nbWorkers);
-
 /*! ZSTDMT_updateCParams_whileCompressing() :
  *  Updates only a selected set of compression parameters, to remain compatible with current frame.
  *  New parameters will be applied to next compression job. */
@@ -174,17 +106,6 @@ void ZSTDMT_updateCParams_whileCompressing(ZSTDMT_CCtx* mtctx, const ZSTD_CCtx_p
 ZSTD_frameProgression ZSTDMT_getFrameProgression(ZSTDMT_CCtx* mtctx);
 
 
-/*! ZSTDMT_initCStream_internal() :
- *  Private use only. Init streaming operation.
- *  expects params to be valid.
- *  must receive dict, or cdict, or none, but not both.
- *  @return : 0, or an error code */
-size_t ZSTDMT_initCStream_internal(ZSTDMT_CCtx* zcs,
-                    const void* dict, size_t dictSize, ZSTD_dictContentType_e dictContentType,
-                    const ZSTD_CDict* cdict,
-                    ZSTD_CCtx_params params, unsigned long long pledgedSrcSize);
-
-
 #if defined (__cplusplus)
 }
 #endif