xaiml 0.1.3 → 0.1.4

data/vendor/bundle/ruby/2.5.0/gems/pry-0.11.3/lib/pry/indent.rb

@@ -1,410 +0,0 @@
-require 'coderay'
-
-class Pry
-  ##
-  # Pry::Indent is a class that can be used to indent a number of lines
-  # containing Ruby code similar as to how IRB does it (but better). The class
-  # works by tokenizing a string using CodeRay and then looping over those
-  # tokens. Based on the tokens in a line of code that line (or the next one)
-  # will be indented or un-indented by correctly.
-  #
-  class Indent
-    include Helpers::BaseHelpers
-
-    # Raised if {#module_nesting} would not work.
-    class UnparseableNestingError < StandardError; end
-
-    # @return [String] String containing the spaces to be inserted before the next line.
-    attr_reader :indent_level
-
-    # @return [Array<String>] The stack of open tokens.
-    attr_reader :stack
-
-    # The amount of spaces to insert for each indent level.
-    SPACES = '  '
-
-    # Hash containing all the tokens that should increase the indentation
-    # level. The keys of this hash are open tokens, the values the matching
-    # tokens that should prevent a line from being indented if they appear on
-    # the same line.
-    OPEN_TOKENS = {
-      'def'    => 'end',
-      'class'  => 'end',
-      'module' => 'end',
-      'do'     => 'end',
-      'if'     => 'end',
-      'unless' => 'end',
-      'while'  => 'end',
-      'until'  => 'end',
-      'for'    => 'end',
-      'case'   => 'end',
-      'begin'  => 'end',
-      '['      => ']',
-      '{'      => '}',
-      '('      => ')'
-    }
-
-    # Which tokens can either be open tokens, or appear as modifiers on
-    # a single-line.
-    SINGLELINE_TOKENS = %w(if while until unless rescue)
-
-    # Which tokens can be followed by an optional "do" keyword.
-    OPTIONAL_DO_TOKENS = %w(for while until)
-
-    # Collection of token types that should be ignored. Without this list
-    # keywords such as "class" inside strings would cause the code to be
-    # indented incorrectly.
-    #
-    # :pre_constant and :preserved_constant are the CodeRay 0.9.8 and 1.0.0
-    # classifications of "true", "false", and "nil".
-    IGNORE_TOKENS = [:space, :content, :string, :method, :ident,
-                     :constant, :pre_constant, :predefined_constant]
-
-    # Tokens that indicate the end of a statement (i.e. that, if they appear
-    # directly before an "if" indicates that that if applies to the same line,
-    # not the next line)
-    #
-    # :reserved and :keywords are the CodeRay 0.9.8 and 1.0.0 respectively
-    # classifications of "super", "next", "return", etc.
-    STATEMENT_END_TOKENS = IGNORE_TOKENS + [:regexp, :integer, :float,
-                                            :keyword, :delimiter, :reserved,
-                                            :instance_variable,
-                                            :class_variable, :global_variable]
-
-    # Collection of tokens that should appear dedented even though they
-    # don't affect the surrounding code.
-    MIDWAY_TOKENS = %w(when else elsif ensure rescue)
-
-    # Clean the indentation of a fragment of ruby.
-    #
-    # @param [String] str
-    # @return [String]
-    def self.indent(str)
-      new.indent(str)
-    end
-
-    # Get the module nesting at the given point in the given string.
-    #
-    # NOTE If the line specified contains a method definition, then the nesting
-    # at the start of the method definition is used. Otherwise the nesting from
-    # the end of the line is used.
-    #
-    # @param [String] str The ruby code to analyze
-    # @param [Fixnum] line_number The line number (starting from 1)
-    # @return [Array<String>]
-    def self.nesting_at(str, line_number)
-      indent = new
-      lines = str.split("\n")
-      n = line_number - 1
-      to_indent = lines[0...n] << (lines[n] || "").split("def").first(1)
-      indent.indent(to_indent.join("\n") << "\n")
-      indent.module_nesting
-    end
-
-    def initialize
-      reset
-    end
-
-    # reset internal state
-    def reset
-      @stack = []
-      @indent_level = ''
-      @heredoc_queue = []
-      @close_heredocs = {}
-      @string_start = nil
-      @awaiting_class = false
-      @module_nesting = []
-      self
-    end
-
-    # Indents a string and returns it. This string can either be a single line
-    # or multiple ones.
-    #
-    # @example
-    #  str = <<TXT
-    #  class User
-    #  attr_accessor :name
-    #  end
-    #  TXT
-    #
-    #  # This would result in the following being displayed:
-    #  #
-    #  # class User
-    #  #   attr_accessor :name
-    #  # end
-    #  #
-    #  puts Pry::Indent.new.indent(str)
-    #
-    # @param  [String] input The input string to indent.
-    # @return [String] The indented version of +input+.
-    #
-    def indent(input)
-      output = ''
-      prefix = indent_level
-
-      input.lines.each do |line|
-
-        if in_string?
-          tokens = tokenize("#{open_delimiters_line}\n#{line}")
-          tokens = tokens.drop_while{ |token, type| !(String === token && token.include?("\n")) }
-          previously_in_string = true
-        else
-          tokens = tokenize(line)
-          previously_in_string = false
-        end
-
-        before, after = indentation_delta(tokens)
-
-        before.times{ prefix.sub! SPACES, '' }
-        new_prefix = prefix + SPACES * after
-
-        line = prefix + line.lstrip unless previously_in_string
-
-        output += line
-
-        prefix = new_prefix
-      end
-
-      @indent_level = prefix
-
-      return output
-    end
-
-    # Get the indentation for the start of the next line.
-    #
-    # This is what's used between the prompt and the cursor in pry.
-    #
-    # @return String  The correct number of spaces
-    #
-    def current_prefix
-      in_string? ? '' : indent_level
-    end
-
-    # Get the change in indentation indicated by the line.
-    #
-    # By convention, you remove indent from the line containing end tokens,
-    # but add indent to the line *after* that which contains the start tokens.
-    #
-    # This method returns a pair, where the first number is the number of closings
-    # on this line (i.e. the number of indents to remove before the line) and the
-    # second is the number of openings (i.e. the number of indents to add after
-    # this line)
-    #
-    # @param  [Array] tokens A list of tokens to scan.
-    # @return [Array[Integer]]
-    #
-    def indentation_delta(tokens)
-
-      # We need to keep track of whether we've seen a "for" on this line because
-      # if the line ends with "do" then that "do" should be discounted (i.e. we're
-      # only opening one level not two) To do this robustly we want to keep track
-      # of the indent level at which we saw the for, so we can differentiate
-      # between "for x in [1,2,3] do" and "for x in ([1,2,3].map do" properly
-      seen_for_at = []
-
-      # When deciding whether an "if" token is the start of a multiline statement,
-      # or just the middle of a single-line if statement, we just look at the
-      # preceding token, which is tracked here.
-      last_token, last_kind = [nil, nil]
-
-      # delta keeps track of the total difference from the start of each line after
-      # the given token, 0 is just the level at which the current line started for
-      # reference.
-      remove_before, add_after = [0, 0]
-
-      # If the list of tokens contains a matching closing token the line should
-      # not be indented (and thus we should return true).
-      tokens.each do |token, kind|
-        is_singleline_if  = (SINGLELINE_TOKENS.include?(token)) && end_of_statement?(last_token, last_kind)
-        is_optional_do = (token == "do" && seen_for_at.include?(add_after - 1))
-
-        last_token, last_kind = token, kind unless kind == :space
-        next if IGNORE_TOKENS.include?(kind)
-
-        track_module_nesting(token, kind)
-
-        seen_for_at << add_after if OPTIONAL_DO_TOKENS.include?(token)
-
-        next if is_singleline_if
-
-        if kind == :delimiter
-          track_delimiter(token)
-        elsif OPEN_TOKENS.keys.include?(token) && !is_optional_do && !is_singleline_if
-          @stack << token
-          add_after += 1
-        elsif token == OPEN_TOKENS[@stack.last]
-          popped = @stack.pop
-          track_module_nesting_end(popped)
-          if add_after == 0
-            remove_before += 1
-          else
-            add_after -= 1
-          end
-        elsif MIDWAY_TOKENS.include?(token)
-          if add_after == 0
-            remove_before += 1
-            add_after += 1
-          end
-        end
-      end
-
-      return [remove_before, add_after]
-    end
-
-    # If the code just before an "if" or "while" token on a line looks like the end of a statement,
-    # then we want to treat that "if" as a singleline, not multiline statement.
-    def end_of_statement?(last_token, last_kind)
-      (last_token =~ /^[)\]}\/]$/ || STATEMENT_END_TOKENS.include?(last_kind))
-    end
-
-    # Are we currently in the middle of a string literal.
-    #
-    # This is used to determine whether to re-indent a given line, we mustn't re-indent
-    # within string literals because to do so would actually change the value of the
-    # String!
-    #
-    # @return Boolean
-    def in_string?
-      !open_delimiters.empty?
-    end
-
-    # Given a string of Ruby code, use CodeRay to export the tokens.
-    #
-    # @param [String] string The Ruby to lex
-    # @return [Array] An Array of pairs of [token_value, token_type]
-    def tokenize(string)
-      tokens = CodeRay.scan(string, :ruby)
-      tokens = tokens.tokens.each_slice(2) if tokens.respond_to?(:tokens) # Coderay 1.0.0
-      tokens.to_a
-    end
-
-    # Update the internal state about what kind of strings are open.
-    #
-    # Most of the complication here comes from the fact that HEREDOCs can be nested. For
-    # normal strings (which can't be nested) we assume that CodeRay correctly pairs
-    # open-and-close delimiters so we don't bother checking what they are.
-    #
-    # @param [String] token The token (of type :delimiter)
-    def track_delimiter(token)
-      case token
-      when /^<<-(["'`]?)(.*)\\1/
-        @heredoc_queue << token
-        @close_heredocs[token] = /^\s*$2/
-      when @close_heredocs[@heredoc_queue.first]
-        @heredoc_queue.shift
-      else
-        if @string_start
-          @string_start = nil
-        else
-          @string_start = token
-        end
-      end
-    end
-
-    # All the open delimiters, in the order that they first appeared.
-    #
-    # @return [String]
-    def open_delimiters
-      @heredoc_queue + [@string_start].compact
-    end
-
-    # Return a string which restores the CodeRay string status to the correct value by
-    # opening HEREDOCs and strings.
-    #
-    # @return String
-    def open_delimiters_line
-      "puts #{open_delimiters.join(", ")}"
-    end
-
-    # Update the internal state relating to module nesting.
-    #
-    # It's responsible for adding to the @module_nesting array, which looks
-    # something like:
-    #
-    # [ ["class", "Foo"], ["module", "Bar::Baz"], ["class <<", "self"] ]
-    #
-    # A nil value in the @module_nesting array happens in two places: either
-    # when @awaiting_class is true and we're still waiting for the string to
-    # fill that space, or when a parse was rejected.
-    #
-    # At the moment this function is quite restricted about what formats it will
-    # parse, for example we disallow expressions after the class keyword. This
-    # could maybe be improved in the future.
-    #
-    # @param [String] token  a token from Coderay
-    # @param [Symbol] kind  the kind of that token
-    def track_module_nesting(token, kind)
-      if kind == :keyword && (token == "class" || token == "module")
-        @module_nesting << [token, nil]
-        @awaiting_class = true
-      elsif @awaiting_class
-        if kind == :operator && token == "<<" && @module_nesting.last[0] == "class"
-          @module_nesting.last[0] = "class <<"
-          @awaiting_class = true
-        elsif kind == :class && token =~ /\A(self|[A-Z:][A-Za-z0-9_:]*)\z/
-          @module_nesting.last[1] = token if kind == :class
-          @awaiting_class = false
-        else
-          # leave @module_nesting[-1]
-          @awaiting_class = false
-        end
-      end
-    end
-
-    # Update the internal state relating to module nesting on 'end'.
-    #
-    # If the current 'end' pairs up with a class or a module then we should
-    # pop an array off of @module_nesting
-    #
-    # @param [String] token  a token from Coderay
-    # @param [Symbol] kind  the kind of that token
-    def track_module_nesting_end(token, kind=:keyword)
-      if kind == :keyword && (token == "class" || token == "module")
-        @module_nesting.pop
-      end
-    end
-
-    # Return a list of strings which can be used to re-construct the Module.nesting at
-    # the current point in the file.
-    #
-    # Returns nil if the syntax of the file was not recognizable.
-    #
-    # @return [Array<String>]
-    def module_nesting
-      @module_nesting.map do |(kind, token)|
-        raise UnparseableNestingError, @module_nesting.inspect if token.nil?
-
-        "#{kind} #{token}"
-      end
-    end
-
-    # Return a string which, when printed, will rewrite the previous line with
-    # the correct indentation. Mostly useful for fixing 'end'.
-    #
-    # @param [String] prompt The user's prompt
-    # @param [String] code   The code the user just typed in.
-    # @param [Fixnum] overhang (0) The number of chars to erase afterwards (i.e.,
-    #   the difference in length between the old line and the new one).
-    # @return [String]
-    def correct_indentation(prompt, code, overhang=0)
-      prompt = prompt.delete("\001\002")
-      line_to_measure = Pry::Helpers::Text.strip_color(prompt) << code
-      whitespace = ' ' * overhang
-
-      _, cols = Terminal.screen_size
-
-      cols = cols.to_i
-      lines = (cols != 0 ? (line_to_measure.length / cols + 1) : 1).to_i
-
-      if Pry::Helpers::BaseHelpers.windows_ansi?
-        move_up   = "\e[#{lines}F"
-        move_down = "\e[#{lines}E"
-      else
-        move_up   = "\e[#{lines}A\e[0G"
-        move_down = "\e[#{lines}B\e[0G"
-      end
-
-      "#{move_up}#{prompt}#{colorize_code(code)}#{whitespace}#{move_down}"
-    end
-  end
-end

data/vendor/bundle/ruby/2.5.0/gems/pry-0.11.3/lib/pry/input_completer.rb

@@ -1,260 +0,0 @@
-# taken from irb
-# Implements tab completion for Readline in Pry
-class Pry::InputCompleter
-  NUMERIC_REGEXP            = /^(-?(0[dbo])?[0-9_]+(\.[0-9_]+)?([eE]-?[0-9]+)?)\.([^.]*)$/
-  ARRAY_REGEXP              = /^([^\]]*\])\.([^.]*)$/
-  SYMBOL_REGEXP             = /^(:[^:.]*)$/
-  SYMBOL_METHOD_CALL_REGEXP = /^(:[^:.]+)\.([^.]*)$/
-  REGEX_REGEXP              = /^(\/[^\/]*\/)\.([^.]*)$/
-  PROC_OR_HASH_REGEXP       = /^([^\}]*\})\.([^.]*)$/
-  TOPLEVEL_LOOKUP_REGEXP    = /^::([A-Z][^:\.\(]*)$/
-  CONSTANT_REGEXP           = /^([A-Z][A-Za-z0-9]*)$/
-  CONSTANT_OR_METHOD_REGEXP = /^([A-Z].*)::([^:.]*)$/
-  HEX_REGEXP                = /^(-?0x[0-9a-fA-F_]+)\.([^.]*)$/
-  GLOBALVARIABLE_REGEXP     = /^(\$[^.]*)$/
-  VARIABLE_REGEXP           = /^([^."].*)\.([^.]*)$/
-
-  ReservedWords = [
-                   "BEGIN", "END",
-                   "alias", "and",
-                   "begin", "break",
-                   "case", "class",
-                   "def", "defined", "do",
-                   "else", "elsif", "end", "ensure",
-                   "false", "for",
-                   "if", "in",
-                   "module",
-                   "next", "nil", "not",
-                   "or",
-                   "redo", "rescue", "retry", "return",
-                   "self", "super",
-                   "then", "true",
-                   "undef", "unless", "until",
-                   "when", "while",
-                   "yield" ]
-
-  Operators = [
-               "%", "&", "*", "**", "+",  "-",  "/",
-               "<", "<<", "<=", "<=>", "==", "===", "=~", ">", ">=", ">>",
-               "[]", "[]=", "^", "!", "!=", "!~"
-              ]
-
-  WORD_ESCAPE_STR = " \t\n\"\\'`><=;|&{("
-
-  def initialize(input, pry = nil)
-    @pry = pry
-    @input = input
-    @input.basic_word_break_characters = WORD_ESCAPE_STR if @input.respond_to?(:basic_word_break_characters=)
-    @input.completion_append_character = nil if @input.respond_to?(:completion_append_character=)
-  end
-
-  #
-  # Return a new completion proc for use by Readline.
-  #
-  def call(str, options = {})
-    custom_completions = options[:custom_completions] || []
-    # if there are multiple contexts e.g. cd 1/2/3
-    # get new target for 1/2 and find candidates for 3
-    path, input = build_path(str)
-
-    if path.call.empty?
-      target = options[:target]
-    else
-      # Assume the user is tab-completing the 'cd' command
-      begin
-        target = Pry::ObjectPath.new(path.call, @pry.binding_stack).resolve.last
-      # but if that doesn't work, assume they're doing division with no spaces
-      rescue Pry::CommandError
-        target = options[:target]
-      end
-    end
-
-    begin
-      bind = target
-      # Complete stdlib symbols
-      case input
-      when REGEX_REGEXP # Regexp
-        receiver = $1
-        message = Regexp.quote($2)
-        candidates = Regexp.instance_methods.collect(&:to_s)
-        select_message(path, receiver, message, candidates)
-      when ARRAY_REGEXP # Array
-        receiver = $1
-        message = Regexp.quote($2)
-        candidates = Array.instance_methods.collect(&:to_s)
-        select_message(path, receiver, message, candidates)
-      when PROC_OR_HASH_REGEXP # Proc or Hash
-        receiver = $1
-        message = Regexp.quote($2)
-        candidates = Proc.instance_methods.collect(&:to_s)
-        candidates |= Hash.instance_methods.collect(&:to_s)
-        select_message(path, receiver, message, candidates)
-      when SYMBOL_REGEXP # Symbol
-        if Symbol.respond_to?(:all_symbols)
-          sym        = Regexp.quote($1)
-          candidates = Symbol.all_symbols.collect{|s| ":" << s.id2name}
-          candidates.grep(/^#{sym}/)
-        else
-          []
-        end
-      when TOPLEVEL_LOOKUP_REGEXP # Absolute Constant or class methods
-        receiver = $1
-        candidates = Object.constants.collect(&:to_s)
-        candidates.grep(/^#{receiver}/).collect{|e| "::" << e}
-      when CONSTANT_REGEXP # Constant
-        message = $1
-        begin
-          context = target.eval("self")
-          context = context.class unless context.respond_to? :constants
-          candidates = context.constants.collect(&:to_s)
-        rescue
-          candidates = []
-        end
-        candidates = candidates.grep(/^#{message}/).collect(&path)
-      when CONSTANT_OR_METHOD_REGEXP # Constant or class methods
-        receiver = $1
-        message = Regexp.quote($2)
-        begin
-          candidates = eval("#{receiver}.constants.collect(&:to_s)", bind)
-          candidates |= eval("#{receiver}.methods.collect(&:to_s)", bind)
-        rescue Pry::RescuableException
-          candidates = []
-        end
-        candidates.grep(/^#{message}/).collect{|e| receiver + "::" + e}
-      when SYMBOL_METHOD_CALL_REGEXP # method call on a Symbol
-        receiver = $1
-        message = Regexp.quote($2)
-        candidates = Symbol.instance_methods.collect(&:to_s)
-        select_message(path, receiver, message, candidates)
-      when NUMERIC_REGEXP
-        # Numeric
-        receiver = $1
-        message = Regexp.quote($5)
-        begin
-          candidates = eval(receiver, bind).methods.collect(&:to_s)
-        rescue Pry::RescuableException
-          candidates = []
-        end
-        select_message(path, receiver, message, candidates)
-      when HEX_REGEXP
-        # Numeric(0xFFFF)
-        receiver = $1
-        message = Regexp.quote($2)
-        begin
-          candidates = eval(receiver, bind).methods.collect(&:to_s)
-        rescue Pry::RescuableException
-          candidates = []
-        end
-        select_message(path, receiver, message, candidates)
-      when GLOBALVARIABLE_REGEXP # global
-        regmessage = Regexp.new(Regexp.quote($1))
-        candidates = global_variables.collect(&:to_s).grep(regmessage)
-      when VARIABLE_REGEXP # variable
-        receiver = $1
-        message = Regexp.quote($2)
-
-        gv = eval("global_variables", bind).collect(&:to_s)
-        lv = eval("local_variables", bind).collect(&:to_s)
-        cv = eval("self.class.constants", bind).collect(&:to_s)
-
-        if (gv | lv | cv).include?(receiver) or /^[A-Z]/ =~ receiver && /\./ !~ receiver
-          # foo.func and foo is local var. OR
-          # Foo::Bar.func
-          begin
-            candidates = eval("#{receiver}.methods", bind).collect(&:to_s)
-          rescue Pry::RescuableException
-            candidates = []
-          end
-        else
-          # func1.func2
-          candidates = Set.new
-          to_ignore = ignored_modules
-          ObjectSpace.each_object(Module){|m|
-            next if (to_ignore.include?(m) rescue true)
-            # jruby doesn't always provide #instance_methods() on each
-            # object.
-            if m.respond_to?(:instance_methods)
-              candidates.merge m.instance_methods(false).collect(&:to_s)
-            end
-          }
-        end
-        select_message(path, receiver, message, candidates.sort)
-      when /^\.([^.]*)$/
-        # Unknown(maybe String)
-        receiver = ""
-        message = Regexp.quote($1)
-        candidates = String.instance_methods(true).collect(&:to_s)
-        select_message(path, receiver, message, candidates)
-      else
-        candidates = eval(
-                          "methods | private_methods | local_variables | " \
-                          "self.class.constants | instance_variables",
-                          bind
-                          ).collect(&:to_s)
-
-        if eval("respond_to?(:class_variables)", bind)
-          candidates += eval("class_variables", bind).collect(&:to_s)
-        end
-        candidates = (candidates|ReservedWords|custom_completions).grep(/^#{Regexp.quote(input)}/)
-        candidates.collect(&path)
-      end
-    rescue Pry::RescuableException
-      []
-    end
-  end
-
-  def select_message(path, receiver, message, candidates)
-    candidates.grep(/^#{message}/).collect { |e|
-      case e
-      when /^[a-zA-Z_]/
-        path.call(receiver + "." << e)
-      when /^[0-9]/
-      when *Operators
-        #receiver + " " << e
-      end
-    }.compact
-  end
-
-  # build_path seperates the input into two parts: path and input.
-  # input is the partial string that should be completed
-  # path is a proc that takes an input and builds a full path.
-  def build_path(input)
-    # check to see if the input is a regex
-    return proc {|i| i.to_s }, input if input[/\/\./]
-    trailing_slash = input.end_with?('/')
-    contexts = input.chomp('/').split(/\//)
-    input = contexts[-1]
-    path = proc do |i|
-      p = contexts[0..-2].push(i).join('/')
-      p += '/' if trailing_slash && !i.nil?
-      p
-    end
-    return path, input
-  end
-
-  def ignored_modules
-    # We could cache the result, but IRB is not loaded by default.
-    # And this is very fast anyway.
-    # By using this approach, we avoid Module#name calls, which are
-    # relatively slow when there are a lot of anonymous modules defined.
-    s = Set.new
-
-    scanner = lambda do |m|
-      next if s.include?(m) # IRB::ExtendCommandBundle::EXCB recurses.
-      s << m
-      m.constants(false).each do |c|
-        value = m.const_get(c)
-        scanner.call(value) if value.is_a?(Module)
-      end
-    end
-
-    # FIXME: Add Pry here as well?
-    [:IRB, :SLex, :RubyLex, :RubyToken].each do |module_name|
-      next unless Object.const_defined?(module_name)
-      scanner.call(Object.const_get(module_name))
-    end
-
-    s.delete(IRB::Context) if defined?(IRB::Context)
-    s
-  end
-end