wxruby3 0.9.2-x64-mingw-ucrt → 0.9.4-x64-mingw-ucrt

data/samples/printing/printing.rb

@@ -11,476 +11,466 @@
 
 require 'wx'
 
-WXPRINT_QUIT = Wx::ID_EXIT
-WXPRINT_PRINT = Wx::ID_PRINT
-WXPRINT_PAGE_SETUP = Wx::ID_PRINT_SETUP
-WXPRINT_PREVIEW = Wx::ID_PREVIEW
-
-WXPRINT_PRINT_PS = 105
-WXPRINT_PAGE_SETUP_PS = 107
-WXPRINT_PREVIEW_PS = 108
-
-WXPRINT_ABOUT = Wx::ID_ABOUT
-
-WXPRINT_ANGLEUP = 110
-WXPRINT_ANGLEDOWN = 111
-
-class MyFrame < Wx::Frame
-
-  attr_accessor :canvas
-
-  def initialize(parent, title, pos, size)
-    super(parent, -1, title, pos, size)
-    @canvas = nil
-    @bitmap = Wx::Bitmap.new
-    @angle = 30
-
-    # map events
-    evt_menu(WXPRINT_QUIT) { |e| on_exit(e) }
-    evt_menu(WXPRINT_PRINT) { |e| on_print(e) }
-    evt_menu(WXPRINT_PREVIEW) { |e| on_print_preview(e) }
-    evt_menu(WXPRINT_PAGE_SETUP) { |e| on_page_setup(e) }
-    evt_menu(WXPRINT_ABOUT) { |e| on_print_about(e) }
-    evt_menu(WXPRINT_ANGLEUP) { |e| on_angle_up(e) }
-    evt_menu(WXPRINT_ANGLEDOWN) { |e| on_angle_down(e) }
-  end
+module Printing
 
-  def draw(dc)
-    dc.set_background(Wx::WHITE_BRUSH)
-    dc.clear()
-    dc.set_font(Wx::get_app.test_font)
+  WXPRINT_QUIT = Wx::ID_EXIT
+  WXPRINT_PRINT = Wx::ID_PRINT
+  WXPRINT_PAGE_SETUP = Wx::ID_PRINT_SETUP
+  WXPRINT_PREVIEW = Wx::ID_PREVIEW
 
-    dc.set_background_mode(Wx::BRUSHSTYLE_TRANSPARENT)
+  WXPRINT_PRINT_PS = 105
+  WXPRINT_PAGE_SETUP_PS = 107
+  WXPRINT_PREVIEW_PS = 108
 
-    dc.set_brush(Wx::CYAN_BRUSH)
-    dc.set_pen(Wx::RED_PEN)
+  WXPRINT_ABOUT = Wx::ID_ABOUT
 
-    dc.draw_rounded_rectangle(0, 20, 200, 80, 20)
+  WXPRINT_ANGLEUP = 110
+  WXPRINT_ANGLEDOWN = 111
 
-    dc.draw_text("Rectangle 200 by 80", 40, 40)
+  class MyFrame < Wx::Frame
 
-    dc.set_pen(Wx::Pen.new(Wx::BLACK, 0, Wx::PENSTYLE_DOT_DASH))
-    dc.draw_ellipse(50, 140, 100, 50)
-    dc.set_pen(Wx::RED_PEN)
+    attr_accessor :canvas
 
-    dc.draw_text("Test message: this is in 10 point text", 10, 180)
+    def initialize(parent, title, pos, size)
+      super(parent, -1, title, pos, size)
+      @canvas = nil
+      @bitmap = Wx::Bitmap.new
+      @angle = 30
 
-    test = "Hebrew    שלום -- Japanese (日本語)"
-    dc.draw_text(test, 10, 200)
+      # map events
+      evt_menu(WXPRINT_QUIT) { |e| on_exit(e) }
+      evt_menu(WXPRINT_PRINT) { |e| on_print(e) }
+      evt_menu(WXPRINT_PREVIEW) { |e| on_print_preview(e) }
+      evt_menu(WXPRINT_PAGE_SETUP) { |e| on_page_setup(e) }
+      evt_menu(WXPRINT_ABOUT) { |e| on_print_about(e) }
+      evt_menu(WXPRINT_ANGLEUP) { |e| on_angle_up(e) }
+      evt_menu(WXPRINT_ANGLEDOWN) { |e| on_angle_down(e) }
+    end
 
-    points = []
-    points << Wx::Point.new(0, 0)
-    points << Wx::Point.new(20, 0)
-    points << Wx::Point.new(20, 20)
-    points << Wx::Point.new(10, 20)
-    points << Wx::Point.new(10, -20)
+    def draw(dc)
+      dc.set_background(Wx::WHITE_BRUSH)
+      dc.clear()
+      dc.set_font(Wx::get_app.test_font)
 
-    dc.draw_polygon(points, 20, 250, Wx::ODDEVEN_RULE)
-    dc.draw_polygon(points, 50, 250, Wx::WINDING_RULE)
+      dc.set_background_mode(Wx::BRUSHSTYLE_TRANSPARENT)
 
-    dc.draw_elliptic_arc(80, 250, 60, 30, 0.0, 270.0)
+      dc.set_brush(Wx::CYAN_BRUSH)
+      dc.set_pen(Wx::RED_PEN)
 
-    points[0].x = 150
-    points[0].y = 250
-    points[1].x = 180
-    points[1].y = 250
-    points[2].x = 180
-    points[2].y = 220
-    points[3].x = 200
-    points[3].y = 220
-    points.pop
-    dc.draw_spline(points)
+      dc.draw_rounded_rectangle(0, 20, 200, 80, 20)
 
-    dc.draw_arc(20, 10, 10, 10, 25, 40)
+      dc.draw_text("Rectangle 200 by 80", 40, 40)
 
-    str = ""
-    i = 0
-    str = "---- Text at angle #{i} ----"
-    dc.draw_rotated_text(str, 100, 300, i)
+      dc.set_pen(Wx::Pen.new(Wx::BLACK, 0, Wx::PENSTYLE_DOT_DASH))
+      dc.draw_ellipse(50, 140, 100, 50)
+      dc.set_pen(Wx::RED_PEN)
 
-    i = @angle;
-    str = "---- Text at angle #{i} ----"
-    dc.draw_rotated_text(str, 100, 300, i)
+      dc.draw_text("Test message: this is in 10 point text", 10, 180)
 
-    dc.set_pen(Wx::BLACK_PEN)
-    dc.draw_line(0, 0, 200, 200)
-    dc.draw_line(200, 0, 0, 200)
+      test = "Hebrew    שלום -- Japanese (日本語)"
+      dc.draw_text(test, 10, 200)
 
-    # Load icon
-    if Wx::PLATFORM == "WXMSW"
-      icon_file = File.join(File.dirname(__FILE__), 'mondrian.ico')
-      my_icon = Wx::Icon.new(icon_file, Wx::BITMAP_TYPE_ICO)
-    else
-      icon_file = File.join(File.dirname(__FILE__), 'mondrian.xpm')
-      my_icon = Wx::Icon.new(icon_file, Wx::BITMAP_TYPE_XPM)
-    end
+      points = []
+      points << Wx::Point.new(0, 0)
+      points << Wx::Point.new(20, 0)
+      points << Wx::Point.new(20, 20)
+      points << Wx::Point.new(10, 20)
+      points << Wx::Point.new(10, -20)
 
-    dc.draw_icon(my_icon, 100, 100)
+      dc.draw_polygon(points, 20, 250, Wx::ODDEVEN_RULE)
+      dc.draw_polygon(points, 50, 250, Wx::WINDING_RULE)
 
-    if @bitmap.is_ok
-      dc.draw_bitmap(@bitmap, 10, 10)
-    end
-  end
+      dc.draw_elliptic_arc(80, 250, 60, 30, 0.0, 270.0)
 
-  def on_angle_up(event)
-    @angle += 5
-    canvas.refresh
-  end
+      points[0].x = 150
+      points[0].y = 250
+      points[1].x = 180
+      points[1].y = 250
+      points[2].x = 180
+      points[2].y = 220
+      points[3].x = 200
+      points[3].y = 220
+      points.pop
+      dc.draw_spline(points)
 
-  def on_angle_down(event)
-    @angle -= 5
-    canvas.refresh
-  end
+      dc.draw_arc(20, 10, 10, 10, 25, 40)
 
-  def on_size(event)
-    super(event)
-  end
+      str = ""
+      i = 0
+      str = "---- Text at angle #{i} ----"
+      dc.draw_rotated_text(str, 100, 300, i)
+
+      i = @angle;
+      str = "---- Text at angle #{i} ----"
+      dc.draw_rotated_text(str, 100, 300, i)
 
-  def on_print(event)
-    printer = Wx::Printer.new(Wx::PrintDialogData.new(Wx::get_app.page_setup_data.print_data))
-    printout = MyPrintout.new("My printout")
-    if (!printer.print(self, printout, true))
-      if (Wx::Printer.get_last_error == Wx::PRINTER_ERROR)
-        Wx::message_box("There was a problem printing.\nPerhaps your current printer is not set correctly?", "Printing", Wx::OK)
+      dc.set_pen(Wx::BLACK_PEN)
+      dc.draw_line(0, 0, 200, 200)
+      dc.draw_line(200, 0, 0, 200)
+
+      # Load icon
+      if Wx::PLATFORM == "WXMSW"
+        icon_file = File.join(File.dirname(__FILE__), 'mondrian.ico')
+        my_icon = Wx::Icon.new(icon_file, Wx::BITMAP_TYPE_ICO)
       else
-        Wx::message_box("You canceled printing", "Printing", Wx::OK)
+        icon_file = File.join(File.dirname(__FILE__), 'mondrian.xpm')
+        my_icon = Wx::Icon.new(icon_file, Wx::BITMAP_TYPE_XPM)
+      end
+
+      dc.draw_icon(my_icon, 100, 100)
+
+      if @bitmap.is_ok
+        dc.draw_bitmap(@bitmap, 10, 10)
       end
-    else
-      Wx::get_app.page_setup_data.print_data = printer.print_dialog_data.print_data
     end
-  end
 
-  def on_print_preview(event)
-    # Pass two printout objects: for preview, and possible printing.
-    preview = Wx::PrintPreview.new(MyPrintout.new,
-                                   MyPrintout.new,
-                                   Wx::PrintDialogData.new(Wx::get_app.page_setup_data.print_data))
-    if not preview.is_ok
-      # delete preview;
-      Wx::message_box("There was a problem previewing.\nPerhaps your current printer is not set correctly?", "Previewing", Wx::OK)
-      return
+    def on_angle_up(event)
+      @angle += 5
+      canvas.refresh
     end
 
-    prev_frame = Wx::PreviewFrame.new(preview, self, "Demo Print Preview", Wx::Point.new(100, 100), Wx::Size.new(600, 650))
-    prev_frame.centre(Wx::BOTH)
-    prev_frame.init
-    prev_frame.show
-  end
+    def on_angle_down(event)
+      @angle -= 5
+      canvas.refresh
+    end
+
+    def on_size(event)
+      super(event)
+    end
 
-  def on_page_setup(event)
-    Wx::PRT.PageSetupDialog(self, Wx::get_app.page_setup_data) do |dlg|
-      dlg.show_modal
+    def on_print(event)
+      printer = Wx::Printer.new(Wx::PrintDialogData.new(Wx::get_app.page_setup_data.print_data))
+      printout = MyPrintout.new("My printout")
+      if (!printer.print(self, printout, true))
+        if (Wx::Printer.get_last_error == Wx::PRINTER_ERROR)
+          Wx::message_box("There was a problem printing.\nPerhaps your current printer is not set correctly?", "Printing", Wx::OK)
+        else
+          Wx::message_box("You canceled printing", "Printing", Wx::OK)
+        end
+      else
+        Wx::get_app.page_setup_data.print_data = printer.print_dialog_data.print_data
+      end
+    end
 
-      Wx::get_app.page_setup_data = dlg.page_setup_data
+    def on_print_preview(event)
+      # Pass two printout objects: for preview, and possible printing.
+      preview = Wx::PrintPreview.new(MyPrintout.new,
+                                     MyPrintout.new,
+                                     Wx::PrintDialogData.new(Wx::get_app.page_setup_data.print_data))
+      if not preview.is_ok
+        # delete preview;
+        Wx::message_box("There was a problem previewing.\nPerhaps your current printer is not set correctly?", "Previewing", Wx::OK)
+        return
+      end
+
+      prev_frame = Wx::PreviewFrame.new(preview, self, "Demo Print Preview", Wx::Point.new(100, 100), Wx::Size.new(600, 650))
+      prev_frame.centre(Wx::BOTH)
+      prev_frame.init
+      prev_frame.show
     end
-  end
 
-  def on_exit(event)
-    close(true)
-  end
+    def on_page_setup(event)
+      Wx::PRT.PageSetupDialog(self, Wx::get_app.page_setup_data) do |dlg|
+        dlg.show_modal
 
-  def on_print_about(event)
-    Wx::message_box("wxWidgets printing demo\nAuthor: Julian Smart\nAdapted to wxRuby by Sean Long",
-                    "About wxRuby printing demo", Wx::OK | Wx::CENTRE)
-  end
+        Wx::get_app.page_setup_data = dlg.page_setup_data
+      end
+    end
 
-end
+    def on_exit(event)
+      close(true)
+    end
 
-class MyCanvas < Wx::ScrolledWindow
-  # attr_accessor :frame
+    def on_print_about(event)
+      Wx::message_box("wxWidgets printing demo\nAuthor: Julian Smart\nAdapted to wxRuby by Sean Long",
+                      "About wxRuby printing demo", Wx::OK | Wx::CENTRE)
+    end
 
-  def initialize(parent, pos, size, style = Wx::RETAINED)
-    super(parent, -1, pos, size, style)
-    @frame = parent
-    set_background_colour(Wx::WHITE)
-    evt_mouse_events() { |e| on_event(e) }
   end
 
-  def on_draw(dc)
-    @frame.draw(dc)
-  end
+  class MyCanvas < Wx::ScrolledWindow
+    # attr_accessor :frame
 
-  def on_event(event) end
-end
+    def initialize(parent, pos, size, style = Wx::RETAINED)
+      super(parent, -1, pos, size, style)
+      @frame = parent
+      set_background_colour(Wx::WHITE)
+      evt_mouse_events() { |e| on_event(e) }
+    end
 
-class MyPrintout < Wx::Printout
-  def initialize(title = "My printout")
-    super(title)
+    def on_draw(dc)
+      @frame.draw(dc)
+    end
+
+    def on_event(event) end
   end
 
-  def on_print_page(page)
-    dc = get_dc
-    if dc
-      if page == 1
-        draw_page_one(dc)
-      elsif (page == 2)
-        draw_page_two(dc)
-      end
-      dc.set_device_origin(0, 0)
-      dc.set_user_scale(1.0, 1.0)
+  class MyPrintout < Wx::Printout
+    def initialize(title = "My printout")
+      super(title)
+    end
 
-      buf = "PAGE #{page}"
-      dc.draw_text(buf, 10, 10)
+    def on_print_page(page)
+      dc = get_dc
+      if dc
+        if page == 1
+          draw_page_one(dc)
+        elsif (page == 2)
+          draw_page_two(dc)
+        end
+        dc.set_device_origin(0, 0)
+        dc.set_user_scale(1.0, 1.0)
+
+        buf = "PAGE #{page}"
+        dc.draw_text(buf, 10, 10)
+
+        return true
+      else
+        return false
+      end
+    end
 
+    def on_begin_document(start_page, end_page)
+      go_ahead = super(start_page, end_page)
+      if (!go_ahead)
+        return false
+      end
       return true
-    else
-      return false
     end
-  end
 
-  def on_begin_document(start_page, end_page)
-    go_ahead = super(start_page, end_page)
-    if (!go_ahead)
-      return false
+    def has_page(page)
+      return (page == 1 || page == 2)
     end
-    return true
-  end
 
-  def has_page(page)
-    return (page == 1 || page == 2)
-  end
+    def get_page_info
+      min_page = 1
+      max_page = 2
+      sel_page_from = 1
+      sel_page_to = 2
+      [min_page, max_page, sel_page_from, sel_page_to]
+    end
 
-  def get_page_info
-    min_page = 1
-    max_page = 2
-    sel_page_from = 1
-    sel_page_to = 2
-    [min_page, max_page, sel_page_from, sel_page_to]
-  end
+    def draw_page_one(dc)
+      # You might use THIS code if you were scaling
+      # graphics of known size to fit on the page.
 
-  def draw_page_one(dc)
-    # You might use THIS code if you were scaling
-    # graphics of known size to fit on the page.
-
-    # We know the graphic is 200x200. If we didn't know this,
-    # we'd need to calculate it.
-    max_x = 200
-    max_y = 200
-
-    # Let's have at least 50 device units margin
-    margin_x = 50
-    margin_y = 50
-
-    # Add the margin to the graphic size
-    max_x += (2 * margin_x)
-    max_y += (2 * margin_y)
-
-    # Get the size of the DC in pixels
-    size = dc.get_size
-    w = size.get_width
-    h = size.get_height
-
-    # Calculate a suitable scaling factor
-    scale_x = (w / max_x)
-    scale_y = (h / max_y)
-
-    # Use x or y scaling factor, whichever fits on the DC
-    # actualScale = Wx::min(scaleX,scaleY)
-    if scale_x < scale_y
-      actual_scale = scale_x
-    else
-      actual_scale = scale_y
-    end
+      # We know the graphic is 200x200. If we didn't know this,
+      # we'd need to calculate it.
+      max_x = 200
+      max_y = 200
 
-    # Calculate the position on the DC for centring the graphic
-    pos_x = ((w - (200 * actual_scale)) / 2.0)
-    pos_y = ((h - (200 * actual_scale)) / 2.0)
+      # Let's have at least 50 device units margin
+      margin_x = 50
+      margin_y = 50
 
-    # Set the scale and origin
-    dc.set_user_scale(actual_scale, actual_scale)
-    dc.set_device_origin(pos_x.to_i, pos_y.to_i)
+      # Add the margin to the graphic size
+      max_x += (2 * margin_x)
+      max_y += (2 * margin_y)
 
-    Wx::get_app.frame.draw(dc)
-  end
+      # Get the size of the DC in pixels
+      size = dc.get_size
+      w = size.get_width
+      h = size.get_height
+
+      # Calculate a suitable scaling factor
+      scale_x = (w / max_x)
+      scale_y = (h / max_y)
+
+      # Use x or y scaling factor, whichever fits on the DC
+      # actualScale = Wx::min(scaleX,scaleY)
+      if scale_x < scale_y
+        actual_scale = scale_x
+      else
+        actual_scale = scale_y
+      end
+
+      # Calculate the position on the DC for centring the graphic
+      pos_x = ((w - (200 * actual_scale)) / 2.0)
+      pos_y = ((h - (200 * actual_scale)) / 2.0)
 
-  def draw_page_two(dc)
-    # You might use THIS code to set the printer DC to ROUGHLY reflect
-    # the screen text size. This page also draws lines of actual length
-    # 5cm on the page.
-
-    # Get the logical pixels per inch of screen and printer
-    ppi_screen_x, ppi_screen_y = get_ppi_screen
-    ppi_printer_x, ppi_printer_y = get_ppi_printer
-
-    # This scales the DC so that the printout roughly represents the
-    # the screen scaling. The text point size _should_ be the right size
-    # but in fact is too small for some reason. This is a detail that will
-    # need to be addressed at some point but can be fudged for the
-    # moment.
-    scale = (ppi_printer_x.to_f / ppi_screen_x.to_f)
-
-    # Now we have to check in case our real page size is reduced
-    # (e.g. because we're drawing to a print preview memory DC)
-    page_width, page_height = get_page_size_pixels
-    size = dc.get_size
-    w = size.get_width
-    h = size.get_height
-
-    # If printer pageWidth == current DC width, then this doesn't
-    # change. But w might be the preview bitmap width, so scale down.
-    overall_scale = scale * (w.to_f / page_width.to_f)
-    dc.set_user_scale(overall_scale, overall_scale)
-
-    # Calculate conversion factor for converting millimetres into
-    # logical units.
-    # There are approx. 25.4 mm to the inch. There are ppi
-    # device units to the inch. Therefore 1 mm corresponds to
-    # ppi/25.4 device units. We also divide by the
-    # screen-to-printer scaling factor, because we need to
-    # unscale to pass logical units to DrawLine.
-
-    # Draw 50 mm by 50 mm L shape
-    log_units_factor = (ppi_printer_x.to_f / (scale * 25.4))
-    log_units = (50 * log_units_factor)
-    dc.set_pen(Wx::BLACK_PEN)
-    dc.draw_line(50, 250, (50.0 + log_units).to_i, 250)
-    dc.draw_line(50, 250, 50, (250.0 + log_units).to_i)
-
-    dc.set_background_mode(Wx::BRUSHSTYLE_TRANSPARENT)
-    dc.set_brush(Wx::TRANSPARENT_BRUSH)
-
-    # GetTextExtent demo:
-    words = ["This ", "is ", "GetTextExtent ", "testing ", "string. ", "Enjoy ", "it!"]
-    w, h = 0, 0
-    x = 200
-    y = 250
-    fnt = Wx::Font.new(15, Wx::FONTFAMILY_SWISS, Wx::FONTSTYLE_NORMAL, Wx::FONTWEIGHT_NORMAL)
-
-    dc.set_font(fnt)
-
-    words.each do |word|
-      w, h = dc.get_text_extent(word)
-      dc.draw_rectangle(x, y, w.to_i, h.to_i)
-      w, h = dc.get_text_extent(word)
-      dc.draw_text(word, x, y)
-      x += w
+      # Set the scale and origin
+      dc.set_user_scale(actual_scale, actual_scale)
+      dc.set_device_origin(pos_x.to_i, pos_y.to_i)
+
+      Wx::get_app.frame.draw(dc)
     end
 
-    dc.set_font(Wx::get_app.test_font)
+    def draw_page_two(dc)
+      # You might use THIS code to set the printer DC to ROUGHLY reflect
+      # the screen text size. This page also draws lines of actual length
+      # 5cm on the page.
+
+      # Get the logical pixels per inch of screen and printer
+      ppi_screen_x, ppi_screen_y = get_ppi_screen
+      ppi_printer_x, ppi_printer_y = get_ppi_printer
+
+      # This scales the DC so that the printout roughly represents the
+      # the screen scaling. The text point size _should_ be the right size
+      # but in fact is too small for some reason. This is a detail that will
+      # need to be addressed at some point but can be fudged for the
+      # moment.
+      scale = (ppi_printer_x.to_f / ppi_screen_x.to_f)
+
+      # Now we have to check in case our real page size is reduced
+      # (e.g. because we're drawing to a print preview memory DC)
+      page_width, page_height = get_page_size_pixels
+      size = dc.get_size
+      w = size.get_width
+      h = size.get_height
+
+      # If printer pageWidth == current DC width, then this doesn't
+      # change. But w might be the preview bitmap width, so scale down.
+      overall_scale = scale * (w.to_f / page_width.to_f)
+      dc.set_user_scale(overall_scale, overall_scale)
+
+      # Calculate conversion factor for converting millimetres into
+      # logical units.
+      # There are approx. 25.4 mm to the inch. There are ppi
+      # device units to the inch. Therefore 1 mm corresponds to
+      # ppi/25.4 device units. We also divide by the
+      # screen-to-printer scaling factor, because we need to
+      # unscale to pass logical units to DrawLine.
+
+      # Draw 50 mm by 50 mm L shape
+      log_units_factor = (ppi_printer_x.to_f / (scale * 25.4))
+      log_units = (50 * log_units_factor)
+      dc.set_pen(Wx::BLACK_PEN)
+      dc.draw_line(50, 250, (50.0 + log_units).to_i, 250)
+      dc.draw_line(50, 250, 50, (250.0 + log_units).to_i)
+
+      dc.set_background_mode(Wx::BRUSHSTYLE_TRANSPARENT)
+      dc.set_brush(Wx::TRANSPARENT_BRUSH)
+
+      # GetTextExtent demo:
+      words = ["This ", "is ", "GetTextExtent ", "testing ", "string. ", "Enjoy ", "it!"]
+      w, h = 0, 0
+      x = 200
+      y = 250
+      fnt = Wx::Font.new(15, Wx::FONTFAMILY_SWISS, Wx::FONTSTYLE_NORMAL, Wx::FONTWEIGHT_NORMAL)
+
+      dc.set_font(fnt)
+
+      words.each do |word|
+        w, h = dc.get_text_extent(word)
+        dc.draw_rectangle(x, y, w.to_i, h.to_i)
+        w, h = dc.get_text_extent(word)
+        dc.draw_text(word, x, y)
+        x += w
+      end
 
-    dc.draw_text("Some test text", 200, 300)
+      dc.set_font(Wx::get_app.test_font)
 
-    left_margin = 20
-    right_margin = 20
-    top_margin = 20
-    bottom_margin = 20
+      dc.draw_text("Some test text", 200, 300)
 
-    page_width_mm, page_height_mm = get_page_size_mm
+      left_margin = 20
+      right_margin = 20
+      top_margin = 20
+      bottom_margin = 20
 
-    left_margin_logical = (log_units_factor * left_margin).to_i
-    top_margin_logical = (log_units_factor * top_margin).to_i
-    bottom_margin_logical = (log_units_factor * (page_height_mm - bottom_margin)).to_i
-    right_margin_logical = (log_units_factor * (page_width_mm - right_margin)).to_i
+      page_width_mm, page_height_mm = get_page_size_mm
 
-    dc.set_pen(Wx::RED_PEN)
-    dc.draw_line(left_margin_logical, top_margin_logical,
-                 right_margin_logical, top_margin_logical)
-    dc.draw_line(left_margin_logical, bottom_margin_logical,
-                 right_margin_logical, bottom_margin_logical)
+      left_margin_logical = (log_units_factor * left_margin).to_i
+      top_margin_logical = (log_units_factor * top_margin).to_i
+      bottom_margin_logical = (log_units_factor * (page_height_mm - bottom_margin)).to_i
+      right_margin_logical = (log_units_factor * (page_width_mm - right_margin)).to_i
 
-    write_page_header(self, dc, "A header", log_units_factor)
-  end
+      dc.set_pen(Wx::RED_PEN)
+      dc.draw_line(left_margin_logical, top_margin_logical,
+                   right_margin_logical, top_margin_logical)
+      dc.draw_line(left_margin_logical, bottom_margin_logical,
+                   right_margin_logical, bottom_margin_logical)
+
+      write_page_header(self, dc, "A header", log_units_factor)
+    end
 
-  # Writes a header on a page. Margin units are in millimetres.
-  def write_page_header(printout, dc, text, mm_to_logical)
-    page_width_mm, page_height_mm = printout.get_page_size_mm
+    # Writes a header on a page. Margin units are in millimetres.
+    def write_page_header(printout, dc, text, mm_to_logical)
+      page_width_mm, page_height_mm = printout.get_page_size_mm
 
-    left_margin = 10
-    top_margin = 10
-    right_margin = 10
+      left_margin = 10
+      top_margin = 10
+      right_margin = 10
 
-    left_margin_logical = (mm_to_logical * left_margin).to_i
-    top_margin_logical = (mm_to_logical * top_margin).to_i
-    right_margin_logical = (mm_to_logical * (page_width_mm - right_margin)).to_i
+      left_margin_logical = (mm_to_logical * left_margin).to_i
+      top_margin_logical = (mm_to_logical * top_margin).to_i
+      right_margin_logical = (mm_to_logical * (page_width_mm - right_margin)).to_i
 
-    x_extent, y_extent = dc.get_text_extent(text)
-    x_pos = (((((page_width_mm - left_margin - right_margin) / 2.0) + left_margin) * mm_to_logical) - (x_extent / 2.0))
-    dc.draw_text(text, x_pos.to_i, top_margin_logical)
+      x_extent, y_extent = dc.get_text_extent(text)
+      x_pos = (((((page_width_mm - left_margin - right_margin) / 2.0) + left_margin) * mm_to_logical) - (x_extent / 2.0))
+      dc.draw_text(text, x_pos.to_i, top_margin_logical)
 
-    dc.set_pen(Wx::BLACK_PEN)
-    dc.draw_line(left_margin_logical, (top_margin_logical + y_extent).to_i,
-                 right_margin_logical, (top_margin_logical + y_extent).to_i)
+      dc.set_pen(Wx::BLACK_PEN)
+      dc.draw_line(left_margin_logical, (top_margin_logical + y_extent).to_i,
+                   right_margin_logical, (top_margin_logical + y_extent).to_i)
 
-    return true
+      return true
+    end
   end
-end
 
-class MyApp < Wx::App
-  attr_accessor :frame, :test_font, :page_setup_data
+  class MyApp < Wx::App
+    attr_accessor :frame, :test_font, :page_setup_data
 
-  def on_init
-    @test_font = Wx::Font.new(10, Wx::FONTFAMILY_SWISS, Wx::FONTSTYLE_NORMAL, Wx::FONTWEIGHT_NORMAL)
+    def on_init
+      @test_font = Wx::Font.new(10, Wx::FONTFAMILY_SWISS, Wx::FONTSTYLE_NORMAL, Wx::FONTWEIGHT_NORMAL)
 
-    # Create the main frame window
-    @frame = MyFrame.new(nil, "wxRuby Printing Demo", Wx::Point.new(0, 0), Wx::Size.new(400, 400))
+      # Create the main frame window
+      @frame = MyFrame.new(nil, "wxRuby Printing Demo", Wx::Point.new(0, 0), Wx::Size.new(400, 400))
 
-    # Give it a status line
-    @frame.create_status_bar(2)
+      # Give it a status line
+      @frame.create_status_bar(2)
 
-    # Load icon and bitmap
-    if Wx::PLATFORM == "WXMSW"
-      icon_file = File.join(File.dirname(__FILE__), 'mondrian.ico')
-      @frame.set_icon(Wx::Icon.new(icon_file, Wx::BITMAP_TYPE_ICO))
-    else
-      icon_file = File.join(File.dirname(__FILE__), 'mondrian.xpm')
-      @frame.set_icon(Wx::Icon.new(icon_file, Wx::BITMAP_TYPE_XPM))
-    end
+      # Load icon
+      @frame.icon = Wx.Icon(:sample, Wx::BITMAP_TYPE_XPM, art_path: File.join(__dir__, '..'))
 
-    # Make a menubar
-    file_menu = Wx::Menu.new
+      # Make a menubar
+      file_menu = Wx::Menu.new
 
-    file_menu.append(WXPRINT_PRINT, "&Print...", "Print")
-    file_menu.append(WXPRINT_PAGE_SETUP, "Page Set&up...", "Page setup")
-    file_menu.append(WXPRINT_PREVIEW, "Print Pre&view", "Preview")
+      file_menu.append(WXPRINT_PRINT, "&Print...", "Print")
+      file_menu.append(WXPRINT_PAGE_SETUP, "Page Set&up...", "Page setup")
+      file_menu.append(WXPRINT_PREVIEW, "Print Pre&view", "Preview")
 
-=begin
-    # Accelerators
-    wxAcceleratorEntry entries[1];
-    entries[0].Set(wxACCEL_CTRL, (int) 'V', WXPRINT_PREVIEW);
-    wxAcceleratorTable accel(1, entries);
-    frame->SetAcceleratorTable(accel);
-=end
+      file_menu.append_separator()
+      file_menu.append(WXPRINT_ANGLEUP, "Angle up\tAlt-U", "Raise rotated text angle")
+      file_menu.append(WXPRINT_ANGLEDOWN, "Angle down\tAlt-D", "Lower rotated text angle")
+      file_menu.append_separator()
+      file_menu.append(WXPRINT_QUIT, "E&xit", "Exit program")
 
-    file_menu.append_separator()
-    file_menu.append(WXPRINT_ANGLEUP, "Angle up\tAlt-U", "Raise rotated text angle")
-    file_menu.append(WXPRINT_ANGLEDOWN, "Angle down\tAlt-D", "Lower rotated text angle")
-    file_menu.append_separator()
-    file_menu.append(WXPRINT_QUIT, "E&xit", "Exit program")
+      help_menu = Wx::Menu.new
+      help_menu.append(WXPRINT_ABOUT, "&About", "About this demo")
 
-    help_menu = Wx::Menu.new
-    help_menu.append(WXPRINT_ABOUT, "&About", "About this demo")
+      menu_bar = Wx::MenuBar.new
 
-    menu_bar = Wx::MenuBar.new
+      menu_bar.append(file_menu, "&File")
+      menu_bar.append(help_menu, "&Help")
 
-    menu_bar.append(file_menu, "&File")
-    menu_bar.append(help_menu, "&Help")
+      # Associate the menu bar with the frame
+      @frame.set_menu_bar(menu_bar)
 
-    # Associate the menu bar with the frame
-    @frame.set_menu_bar(menu_bar)
+      canvas = MyCanvas.new(@frame, Wx::Point.new(0, 0), Wx::Size.new(100, 100), Wx::RETAINED | Wx::HSCROLL | Wx::VSCROLL)
 
-    canvas = MyCanvas.new(@frame, Wx::Point.new(0, 0), Wx::Size.new(100, 100), Wx::RETAINED | Wx::HSCROLL | Wx::VSCROLL)
+      # Give it scrollbars: the virtual canvas is 20 * 50 = 1000 pixels in each direction
+      canvas.set_scrollbars(20, 20, 50, 50)
 
-    # Give it scrollbars: the virtual canvas is 20 * 50 = 1000 pixels in each direction
-    canvas.set_scrollbars(20, 20, 50, 50)
+      @frame.canvas = canvas
 
-    @frame.canvas = canvas
+      @frame.centre(Wx::BOTH)
+      @frame.show()
 
-    @frame.centre(Wx::BOTH)
-    @frame.show()
+      @frame.set_status_text("Printing demo")
 
-    @frame.set_status_text("Printing demo")
+      set_top_window(@frame)
 
-    set_top_window(@frame)
+      #@print_data = Wx::PrintData.new
+      @page_setup_data = Wx::PageSetupDialogData.new
 
-    #@print_data = Wx::PrintData.new
-    @page_setup_data = Wx::PageSetupDialogData.new
+      return true
+    end
 
-    return true
+    def on_exit
+      return true
+    end
   end
 
-  def on_exit
-    return true
-  end
 end
 
 module PrintingSample
@@ -498,7 +488,7 @@ module PrintingSample
   end
 
   if $0 == __FILE__
-    MyApp.run
+    Printing::MyApp.run
   end
 
 end