wxruby3 0.9.1-x64-mingw-ucrt → 0.9.3-x64-mingw-ucrt

data/lib/wx/doc/gen/pg/property_grid_interface.rb

@@ -7,21 +7,29 @@
 module Wx::PG
 
   # Most of the shared property manipulation interface shared by {Wx::PG::PropertyGrid}, {Wx::PG::PropertyGridPage}, and {Wx::PG::PropertyGridManager} is defined in this class.
+  # 
+  # <div class="wxrb-remark">
+  # <b>Remark:</b>
+  # <p>
+  # 
   # - In separate {Wx::PG::PropertyGrid} component this class was known as {Wx::PropertyContainerMethods}.
   # - {Wx::PG::PropertyGridInterface}'s property operation member functions all accept a special {Wx::PGPropArg} id argument, using which you can refer to properties either by their pointer (for performance) or by their name (for conveniency).
   # 
-  # === 
+  # </p>
+  # </div>
   # 
   # Category:  {Wx::PG::PropertyGrid}
   # 
   # 
   # @note  In wxRuby this is a mixin module instead of a (base) class.
+  # @wxrb_require USE_PROPGRID
   module PropertyGridInterface
   
     # 
     # 
     # Flags for {Wx::PG::PropertyGridInterface#save_editable_state} and {Wx::PG::PropertyGridInterface#restore_editable_state}.
     # 
+    # @wxrb_require USE_PROPGRID
     class EditableStateFlags < Wx::Enum
     
       # Include selected property.
@@ -55,12 +63,20 @@ module Wx::PG
     end # EditableStateFlags
     
     # Appends property to the list.
+    # 
     # {Wx::PG::PropertyGrid} assumes ownership of the object. Becomes child of most recently added category.
     # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>
+    # 
     # - {Wx::PG::PropertyGrid} takes the ownership of the property pointer.
     # - If appending a category with name identical to a category already in the {Wx::PG::PropertyGrid}, then newly created category is deleted, and most recently added category (under which properties are appended) is set to the one with same name. This allows easier adding of items to same categories in multiple passes.
     # - Does not automatically redraw the control, so you may need to call Refresh() when calling this function after control has been shown for the first time.
-    # - This functions deselects selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value.
+    # - This functions deselects selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value. 
+    # 
+    # </p>
+    # </div>
     # @param property [Wx::PG::PGProperty] 
     # @return [Wx::PG::PGProperty]
     def append(property) end
@@ -72,6 +88,7 @@ module Wx::PG
     def append_in(id, newProperty) end
     
     # In order to add new items into a property with private children (for instance, {Wx::PG::FlagsProperty}), you need to call this method.
+    # 
     # After populating has been finished, you need to call {Wx::PG::PropertyGridInterface#end_add_children}.
     # @see Wx::PG::PropertyGridInterface#end_add_children 
     # @param id [String,Wx::PG::PGProperty] 
@@ -79,14 +96,24 @@ module Wx::PG
     def begin_add_children(id) end
     
     # Deletes all properties.
-    # This functions deselects selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value.
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>This functions deselects selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value. 
+    # </p>
+    # </div>
     # @return [void]
     def clear; end
     
     # Clears current selection, if any.
+    # 
     # Returns true if successful or if there was no selection. May fail if validation was enabled and active editor had invalid value.
     # 
-    # In wxWidgets 2.9 and later, this function no longer sends {Wx::PG_EVT_SELECTED}.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>In wxWidgets 2.9 and later, this function no longer sends {Wx::PG_EVT_SELECTED}.
+    # </p>
+    # </div>
     # @see Wx::PG::PropertyGrid#select_property 
     # @param validation [Boolean]  If set to false, deselecting the property will always work, even if its editor had invalid value in it.
     # @return [Boolean]
@@ -97,23 +124,39 @@ module Wx::PG
     def clear_modified_status; end
     
     # Collapses given category or property with children.
+    # 
     # Returns true if actually collapsed.
     # 
-    # This function may deselect selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>This function may deselect selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value. 
+    # </p>
+    # </div>
     # @param id [String,Wx::PG::PGProperty] 
     # @return [Boolean]
     def collapse(id) end
     
     # Collapses all items that can be collapsed.
+    # 
     # Return false if failed (may fail if editor value cannot be validated).
     # 
-    # This functions clears selection. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>This functions clears selection. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value. 
+    # </p>
+    # </div>
     # @return [Boolean]
     def collapse_all; end
     
     # Changes value of a property, as if by user.
+    # 
     # Use this instead of {Wx::PG::PropertyGridInterface#set_property_value} if you need the value to run through validation process, and also send {Wx::PG::EVT_PG_CHANGED}.
-    # Since this function sends {Wx::PG::EVT_PG_CHANGED}, it should not be called from EVT_PG_CHANGED handler.
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>Since this function sends {Wx::PG::EVT_PG_CHANGED}, it should not be called from EVT_PG_CHANGED handler.
+    # </p>
+    # </div>
     # 
     # Returns true if value was successfully changed.
     # @param id [String,Wx::PG::PGProperty] 
@@ -122,7 +165,12 @@ module Wx::PG
     def change_property_value(id, newValue) end
     
     # Removes and deletes a property and any children.
-    # If you delete a property in a {Wx::PG::PropertyGrid} event handler, the actual deletion is postponed until the next idle event.
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>If you delete a property in a {Wx::PG::PropertyGrid} event handler, the actual deletion is postponed until the next idle event.
+    # </p>
+    # </div>
     # 
     # This functions deselects selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value.
     # @param id [String,Wx::PG::PGProperty]  Pointer or name of a property.
@@ -130,7 +178,12 @@ module Wx::PG
     def delete_property(id) end
     
     # Disables a property.
-    # Property is refreshed with new settings.
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>Property is refreshed with new settings.
+    # </p>
+    # </div>
     # @see Wx::PG::PropertyGridInterface#enable_property
     # @see  Wx::PG::PGProperty#enable 
     # @param id [String,Wx::PG::PGProperty] 
@@ -138,14 +191,20 @@ module Wx::PG
     def disable_property(id) end
     
     # Returns true if all property grid data changes have been committed.
+    # 
     # Usually only returns false if value in active editor has been invalidated by a {Wx::Validator}.
     # @return [Boolean]
     def editor_validate; end
     
     # Enables or disables property.
+    # 
     # Disabled property usually appears as having grey text.
     # 
-    # Property is refreshed with new settings.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>Property is refreshed with new settings.
+    # </p>
+    # </div>
     # @see Wx::PG::PGProperty#enable 
     # @param id [String,Wx::PG::PGProperty]  Name or pointer to a property.
     # @param enable [Boolean]  If false, property is disabled instead.
@@ -154,27 +213,39 @@ module Wx::PG
     
     # Called after population of property with fixed children has finished.
     # 
+    # 
     # @see Wx::PG::PropertyGridInterface#begin_add_children 
     # @param id [String,Wx::PG::PGProperty] 
     # @return [void]
     def end_add_children(id) end
     
     # Expands given category or property with children.
+    # 
     # Returns true if actually expanded.
     # 
-    # This function may deselect selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>This function may deselect selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value. 
+    # </p>
+    # </div>
     # @param id [String,Wx::PG::PGProperty] 
     # @return [Boolean]
     def expand(id) end
     
     # Expands all items that can be expanded.
-    # This functions clears selection. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value.
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>This functions clears selection. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value. 
+    # </p>
+    # </div>
     # @param expand [Boolean] 
     # @return [Boolean]
     def expand_all(expand=true) end
     
     # Returns auto-resize proportion of the given column.
     # 
+    # 
     # @see Wx::PG::PropertyGridInterface#set_column_proportion 
     # @param column [Integer] 
     # @return [Integer]
@@ -182,7 +253,12 @@ module Wx::PG
     alias_method :column_proportion, :get_column_proportion
     
     # Returns id of first child of given property.
-    # Does not return private children!
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>Does not return private children! 
+    # </p>
+    # </div>
     # @param id [String,Wx::PG::PGProperty] 
     # @return [Wx::PG::PGProperty]
     def get_first_child(id) end
@@ -194,14 +270,21 @@ module Wx::PG
     alias_method :first, :get_first
     
     # Returns pointer to a property with given name (case-sensitive).
+    # 
     # If there is no property with such name, NULL pointer is returned.
-    # Properties which have non-category, non-root parent cannot be accessed globally by their name. Instead, use "<property>.<subproperty>" instead of "<subproperty>".
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>Properties which have non-category, non-root parent cannot be accessed globally by their name. Instead, use "<property>.<subproperty>" instead of "<subproperty>". 
+    # </p>
+    # </div>
     # @param name [String] 
     # @return [Wx::PG::PGProperty]
     def get_property(name) end
     alias_method :property, :get_property
     
     # Adds to targetArr pointers to properties that have given flags set.
+    # 
     # However, if inverse is set to true, then only properties without given flags are stored.
     # @param flags [Integer]  Property flags to use.
     # @param inverse [Boolean]  If false, properties that have given flags are stored, otherwise there are stored only properties without given flags.
@@ -211,6 +294,7 @@ module Wx::PG
     alias_method :properties_with_flag, :get_properties_with_flag
     
     # Returns value of given attribute.
+    # 
     # If none found, returns {Wx::NullVariant}.
     # @param id [String,Wx::PG::PGProperty] 
     # @param attrName [String] 
@@ -225,6 +309,7 @@ module Wx::PG
     alias_method :property_background_colour, :get_property_background_colour
     
     # Returns pointer of property's nearest parent category.
+    # 
     # If no category found, returns NULL.
     # @param id [String,Wx::PG::PGProperty] 
     # @return [Wx::PG::PropertyCategory]
@@ -238,6 +323,7 @@ module Wx::PG
     alias_method :property_client_data, :get_property_client_data
     
     # Returns first property which label matches given string.
+    # 
     # NULL if none found. Note that this operation is very slow when compared to {Wx::PG::PropertyGridInterface#get_property_by_name}.
     # @param label [String] 
     # @return [Wx::PG::PGProperty]
@@ -246,12 +332,19 @@ module Wx::PG
     
     # @overload get_property_by_name(name)
     #   Returns pointer to a property with given name (case-sensitive).
+    #   
     #   If there is no property with such name, NULL pointer is returned.
-    #   Properties which have non-category, non-root parent cannot be accessed globally by their name. Instead, use "<property>.<subproperty>" instead of "<subproperty>".
+    #   
+    #   <div class="wxrb-remark">
+    #   <b>Remark:</b>
+    #   <p>Properties which have non-category, non-root parent cannot be accessed globally by their name. Instead, use "<property>.<subproperty>" instead of "<subproperty>". 
+    #   </p>
+    #   </div>
     #   @param name [String] 
     #   @return [Wx::PG::PGProperty]
     # @overload get_property_by_name(name, subname)
     #   Returns child property subname of property name.
+    #   
     #   Same as calling GetPropertyByName("name.subname"), albeit slightly faster.
     #   @param name [String] 
     #   @param subname [String] 
@@ -304,10 +397,12 @@ module Wx::PG
     # Returns validator of a property as a reference, which you can pass to any number of SetPropertyValidator.
     # @param id [String,Wx::PG::PGProperty] 
     # @return [Wx::Validator]
+    # @wxrb_require USE_VALIDATORS
     def get_property_validator(id) end
     alias_method :property_validator, :get_property_validator
     
     # Returns property's value as {Wx::Variant}.
+    # 
     # If property value is unspecified, {Wx::NullVariant} is returned.
     # @param id [String,Wx::PG::PGProperty] 
     # @return [Wx::Variant]
@@ -335,6 +430,7 @@ module Wx::PG
     # Return's property's value as {Wx::DateTime}.
     # @param id [String,Wx::PG::PGProperty] 
     # @return [Time,Date,DateTime]
+    # @wxrb_require USE_DATETIME
     def get_property_value_as_date_time(id) end
     alias_method :property_value_as_date_time, :get_property_value_as_date_time
     
@@ -359,10 +455,12 @@ module Wx::PG
     # Returns property's value as native signed 64-bit integer.
     # @param id [String,Wx::PG::PGProperty] 
     # @return [Integer]
+    # @wxrb_require USE_LONGLONG
     def get_property_value_as_long_long(id) end
     alias_method :property_value_as_long_long, :get_property_value_as_long_long
     
     # Returns property's value as {Wx::String}.
+    # 
     # If property does not use string value type, then its value is converted using {Wx::PG::PGProperty#get_value_as_string}.
     # @param id [String,Wx::PG::PGProperty] 
     # @return [String]
@@ -378,10 +476,12 @@ module Wx::PG
     # Returns property's value as native unsigned 64-bit integer.
     # @param id [String,Wx::PG::PGProperty] 
     # @return [Integer]
+    # @wxrb_require USE_LONGLONG
     def get_property_value_as_u_long_long(id) end
     alias_method :property_value_as_u_long_long, :get_property_value_as_u_long_long
     
     # Returns a {Wx::Variant} list containing {Wx::Variant} versions of all property values.
+    # 
     # Order is not guaranteed.
     # @param listname [String]  Name of the returned {Wx::Variant} list.
     # @param baseparent [Wx::PG::PGProperty]  The base property which children properties will be queried for values.
@@ -391,14 +491,25 @@ module Wx::PG
     alias_method :property_values, :get_property_values
     
     # Returns list of currently selected properties.
-    # {Wx::ArrayPGProperty} should be compatible with std::vector API.
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>{Wx::ArrayPGProperty} should be compatible with std::vector API. 
+    # </p>
+    # </div>
     # @return [Array<Wx::PG::PGProperty>]
     def get_selected_properties; end
     alias_method :selected_properties, :get_selected_properties
     
     # Returns currently selected property.
+    # 
     # NULL if none.
-    # When {Wx::PG::PG_EX_WINDOW_STYLES::PG_EX_MULTIPLE_SELECTION} extra style is used, this member function returns the focused property, that is the one which can have active editor.
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>When {Wx::PG::PG_EX_WINDOW_STYLES::PG_EX_MULTIPLE_SELECTION} extra style is used, this member function returns the focused property, that is the one which can have active editor. 
+    # </p>
+    # </div>
     # @return [Wx::PG::PGProperty]
     def get_selection; end
     alias_method :selection, :get_selection
@@ -412,8 +523,15 @@ module Wx::PG
     
     # @overload insert(priorThis, newProperty)
     #   Inserts property to the property container.
+    #   
     #   Returns newProperty.
     #   
+    #   <div class="wxrb-remark">
+    #   <b>Remark:</b>
+    #   <p>
+    #   </p>
+    #   </div>
+    #   
     #   - {Wx::PG::PropertyGrid} takes the ownership of the property pointer.
     #   - While Append may be faster way to add items, make note that when both types of data storage (categoric and non-categoric) are active, Insert becomes even more slow. This is especially true if current mode is non-categoric.
     #   - This functions deselects selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value.
@@ -437,6 +555,7 @@ module Wx::PG
     #   @return [Wx::PG::PGProperty]
     # @overload insert(parent, index, newProperty)
     #   Inserts property to the property container.
+    #   
     #   See the other overload for more details.
     #   
     #   Returns newProperty.
@@ -459,6 +578,7 @@ module Wx::PG
     alias_method :property_enabled?, :is_property_enabled
     
     # Returns true if given property is expanded.
+    # 
     # Naturally, always returns false for properties that cannot be expanded.
     # @param id [String,Wx::PG::PGProperty] 
     # @return [Boolean]
@@ -478,6 +598,7 @@ module Wx::PG
     alias_method :property_selected?, :is_property_selected
     
     # Returns true if property is shown (i.e.
+    # 
     # {Wx::PG::PropertyGridInterface#hide_property} with true not called for it).
     # @param id [String,Wx::PG::PGProperty] 
     # @return [Boolean]
@@ -491,7 +612,12 @@ module Wx::PG
     alias_method :property_value_unspecified?, :is_property_value_unspecified
     
     # Disables (limit = true) or enables (limit = false) {Wx::TextCtrl} editor of a property, if it is not the sole mean to edit the value.
-    # Property is refreshed with new settings.
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>Property is refreshed with new settings. 
+    # </p>
+    # </div>
     # @param id [String,Wx::PG::PGProperty] 
     # @param limit [Boolean] 
     # @return [void]
@@ -503,6 +629,7 @@ module Wx::PG
     def refresh_grid(state=nil) end
     
     # Replaces property with id with newly created one.
+    # 
     # For example, this code replaces existing property named "Flags" with one that will have different set of items:
     # 
     # ```ruby
@@ -515,11 +642,16 @@ module Wx::PG
     def replace_property(id, property) end
     
     # Restores user-editable state.
+    # 
     # See also {Wx::PG::PropertyGridInterface#save_editable_state}.
     # 
     # Returns false if there was problem reading the string.
     # 
-    # If some parts of state (such as scrolled or splitter position) fail to restore correctly, please make sure that you call this function after {Wx::PG::PropertyGrid} size has been set (this may sometimes be tricky when sizers are used).
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>If some parts of state (such as scrolled or splitter position) fail to restore correctly, please make sure that you call this function after {Wx::PG::PropertyGrid} size has been set (this may sometimes be tricky when sizers are used). 
+    # </p>
+    # </div>
     # @param src [String]  String generated by SaveEditableState.
     # @param restoreStates [Integer]  Which parts to restore from source string. See list of editable state flags.
     # @return [Boolean]
@@ -531,10 +663,15 @@ module Wx::PG
     def save_editable_state(includedStates=Wx::PG::PropertyGridManager::EditableStateFlags::AllStates) end
     
     # Set proportion of an auto-stretchable column.
+    # 
     # {Wx::PG::PG_WINDOW_STYLES::PG_SPLITTER_AUTO_CENTER} window style needs to be used to indicate that columns are auto- resizable.
     # Returns false on failure.
     # 
-    # You should call this for individual pages of {Wx::PG::PropertyGridManager} (if used).
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>You should call this for individual pages of {Wx::PG::PropertyGridManager} (if used).
+    # </p>
+    # </div>
     # @see Wx::PG::PropertyGridInterface#get_column_proportion 
     # @param column [Integer] 
     # @param proportion [Integer] 
@@ -542,8 +679,16 @@ module Wx::PG
     def set_column_proportion(column, proportion) end
     
     # Sets an attribute for this property.
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>
+    # 
     # - Setting attribute's value to {Wx::NullVariant} will simply remove it from property's set of attributes.
-    # - Property is refreshed with new settings.
+    # - Property is refreshed with new settings. 
+    # 
+    # </p>
+    # </div>
     # @param id [String,Wx::PG::PGProperty]  Name or pointer to a property.
     # @param attrName [String]  Text identifier of attribute. See wxPropertyGrid Property Attribute Identifiers.
     # @param value [nil,String,Integer,Float,Time,Wx::Font,Wx::Colour,Wx::Variant,Array<WxVariant>,Array<String>,ObjectWx::PG::ColourPropertyValue]  Value of attribute.
@@ -552,16 +697,30 @@ module Wx::PG
     def set_property_attribute(id, attrName, value, argFlags=0) end
     
     # Sets property attribute for all applicable properties.
+    # 
     # Be sure to use this method only after all properties have been added to the grid.
-    # Properties are refreshed with new settings.
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>Properties are refreshed with new settings. 
+    # </p>
+    # </div>
     # @param attrName [String] 
     # @param value [nil,String,Integer,Float,Time,Wx::Font,Wx::Colour,Wx::Variant,Array<WxVariant>,Array<String>,ObjectWx::PG::ColourPropertyValue] 
     # @return [void]
     def set_property_attribute_all(attrName, value) end
     
     # Sets background colour of given property.
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>
+    # 
     # - If category is tried to set recursively, only its children are affected.
-    # - Property is redrawn with new colour.
+    # - Property is redrawn with new colour. 
+    # 
+    # </p>
+    # </div>
     # @param id [String,Wx::PG::PGProperty]  Property name or pointer.
     # @param colour [Wx::Colour,String,Symbol]  New background colour.
     # @param flags [Integer]  Default is {Wx::PG::PG_GETPROPERTYVALUES_FLAGS::PG_RECURSE} which causes colour to be set recursively. Omit this flag to only set colour for the property in question and not any of its children.
@@ -569,8 +728,16 @@ module Wx::PG
     def set_property_background_colour(id, colour, flags=Wx::PG::PG_GETPROPERTYVALUES_FLAGS::PG_RECURSE) end
     
     # Sets text, bitmap, and colours for given column's cell.
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>
+    # 
     # - You can set label cell by using column 0.
-    # - You can use {Wx::PG::PG_LABEL} as text to use default text for column.
+    # - You can use {Wx::PG::PG_LABEL} as text to use default text for column. 
+    # 
+    # </p>
+    # </div>
     # @param id [String,Wx::PG::PGProperty] 
     # @param column [Integer] 
     # @param text [String] 
@@ -581,15 +748,28 @@ module Wx::PG
     def set_property_cell(id, column, text=(''), bitmap=(Wx::BitmapBundle.new()), fgCol=Wx::NULL_COLOUR, bgCol=Wx::NULL_COLOUR) end
     
     # Sets client data (void*) of a property.
-    # This untyped client data has to be deleted manually.
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>This untyped client data has to be deleted manually. 
+    # </p>
+    # </div>
     # @param id [String,Wx::PG::PGProperty] 
     # @param clientData [Object] 
     # @return [void]
     def set_property_client_data(id, clientData) end
     
     # Resets text and background colours of given property.
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>
+    # 
     # - If category is tried to set recursively, only its children are affected.
-    # - Property is redrawn with new colours.
+    # - Property is redrawn with new colours. 
+    # 
+    # </p>
+    # </div>
     # @param id [String,Wx::PG::PGProperty]  Property name or pointer.
     # @param flags [Integer]  Default is {Wx::PG::PG_GETPROPERTYVALUES_FLAGS::PG_DONT_RECURSE} which causes colour to be reset only for the property in question (for backward compatibility).
     # @return [void]
@@ -598,12 +778,14 @@ module Wx::PG
     
     # @overload set_property_editor(id, editor)
     #   Sets editor for a property.
+    #   
     #   For custom editors, use pointer you received from {Wx::PG::PropertyGrid.register_editor_class}.
     #   @param id [String,Wx::PG::PGProperty]  Property name or pointer to a property.
     #   @param editor [Wx::PG::PGEditor]  For builtin editors, use {Wx::PGEditor_X}, where X is builtin editor's name (TextCtrl, Choice, etc. see {Wx::PG::PGEditor} documentation for full list).
     #   @return [void]
     # @overload set_property_editor(id, editorName)
     #   Sets editor control of a property.
+    #   
     #   As editor argument, use editor name string, such as "TextCtrl" or "Choice".
     #   @param id [String,Wx::PG::PGProperty] 
     #   @param editorName [String] 
@@ -611,7 +793,15 @@ module Wx::PG
     def set_property_editor(*args) end
     
     # Sets label of a property.
-    # - Properties under same parent may have same labels. However, property names must still remain unique.
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>
+    # 
+    # - Properties under same parent may have same labels. However, property names must still remain unique. 
+    # 
+    # </p>
+    # </div>
     # @param id [String,Wx::PG::PGProperty] 
     # @param newproplabel [String] 
     # @return [void]
@@ -624,10 +814,18 @@ module Wx::PG
     def set_property_name(id, newName) end
     
     # Sets property (and, recursively, its children) to have read-only value.
+    # 
     # In other words, user cannot change the value in the editor, but they can still copy it.
     # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>
+    # 
     # - This is mainly for use with textctrl editor. Only some other editors fully support it.
-    # - Property is refreshed with new settings.
+    # - Property is refreshed with new settings. 
+    # 
+    # </p>
+    # </div>
     # @param id [String,Wx::PG::PGProperty]  Property name or pointer.
     # @param set [Boolean]  Use true to enable read-only, false to disable it.
     # @param flags [Integer]  By default changes are applied recursively. Set this parameter to {Wx::PG::PG_GETPROPERTYVALUES_FLAGS::PG_DONT_RECURSE} to prevent this.
@@ -636,6 +834,7 @@ module Wx::PG
     alias_method :property_read_only=, :set_property_read_only
     
     # Sets property's value to unspecified.
+    # 
     # If it has children (it may be category), then the same thing is done to them.
     # @param id [String,Wx::PG::PGProperty] 
     # @return [void]
@@ -656,20 +855,31 @@ module Wx::PG
     alias_method :property_values=, :set_property_values
     
     # Associates the help string with property.
-    # By default, text is shown either in the manager's "description" text box or in the status bar. If extra window style {Wx::PG::PG_EX_WINDOW_STYLES::PG_EX_HELP_AS_TOOLTIPS} is used, then the text will appear as a tooltip.
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>By default, text is shown either in the manager's "description" text box or in the status bar. If extra window style {Wx::PG::PG_EX_WINDOW_STYLES::PG_EX_HELP_AS_TOOLTIPS} is used, then the text will appear as a tooltip. 
+    # </p>
+    # </div>
     # @param id [String,Wx::PG::PGProperty] 
     # @param helpString [String] 
     # @return [void]
     def set_property_help_string(id, helpString) end
     
     # Set {Wx::Bitmap} taken from {Wx::BitmapBundle} in front of the value.
-    # Bitmap will be scaled to a size returned by {Wx::PG::PropertyGrid#get_image_size};
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>Bitmap will be scaled to a size returned by {Wx::PG::PropertyGrid#get_image_size}; 
+    # </p>
+    # </div>
     # @param id [String,Wx::PG::PGProperty] 
     # @param bmp [Wx::BitmapBundle] 
     # @return [void]
     def set_property_image(id, bmp) end
     
     # Sets maximum length of text in property text editor.
+    # 
     # Returns true if maximum length was set.
     # @see Wx::PG::PGProperty#set_max_length. 
     # @param id [String,Wx::PG::PGProperty]  Property name or pointer.
@@ -678,8 +888,16 @@ module Wx::PG
     def set_property_max_length(id, maxLen) end
     
     # Sets text colour of given property.
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>
+    # 
     # - If category is tried to set recursively, only its children are affected.
-    # - Property is redrawn with new colour.
+    # - Property is redrawn with new colour. 
+    # 
+    # </p>
+    # </div>
     # @param id [String,Wx::PG::PGProperty]  Property name or pointer.
     # @param colour [Wx::Colour,String,Symbol]  New text colour.
     # @param flags [Integer]  Default is {Wx::PG::PG_GETPROPERTYVALUES_FLAGS::PG_RECURSE} which causes colour to be set recursively. Omit this flag to only set colour for the property in question and not any of its children.
@@ -774,20 +992,31 @@ module Wx::PG
     #   @return [void]
     # @overload set_property_value(id, value)
     #   Sets value ({Wx::Variant}) of a property.
-    #   Use {Wx::PG::PropertyGridInterface#change_property_value} instead if you need to run through validation process and send property change event.
+    #   
+    #   <div class="wxrb-remark">
+    #   <b>Remark:</b>
+    #   <p>Use {Wx::PG::PropertyGridInterface#change_property_value} instead if you need to run through validation process and send property change event. 
+    #   </p>
+    #   </div>
     #   @param id [String,Wx::PG::PGProperty] 
     #   @param value [nil,String,Integer,Float,Time,Wx::Font,Wx::Colour,Wx::Variant,Array<WxVariant>,Array<String>,ObjectWx::PG::ColourPropertyValue] 
     #   @return [void]
     def set_property_value(*args) end
     
     # Sets value ({Wx::String}) of a property.
-    # This method uses {Wx::PG::PGProperty#set_value_from_string}, which all properties should implement. This means that there should not be a type error, and instead the string is converted to property's actual value type.
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>This method uses {Wx::PG::PGProperty#set_value_from_string}, which all properties should implement. This means that there should not be a type error, and instead the string is converted to property's actual value type. 
+    # </p>
+    # </div>
     # @param id [String,Wx::PG::PGProperty] 
     # @param value [String] 
     # @return [void]
     def set_property_value_string(id, value) end
     
     # Sets value ({Wx::Variant}&) of a property.
+    # 
     # Same as SetPropertyValue, but accepts reference.
     # @param id [String,Wx::PG::PGProperty] 
     # @param value [Wx::Variant] 
@@ -802,6 +1031,7 @@ module Wx::PG
     
     # Sorts all properties recursively.
     # 
+    # 
     # @see Wx::PG::PropertyGridInterface#sort_children
     # @see  Wx::PG::PropertyGrid#set_sort_function 
     # @param flags [Integer]  This can contain any of the following options: {Wx::PG::PG_GETPROPERTYVALUES_FLAGS::PG_SORT_TOP_LEVEL_ONLY}: Only sort categories and their immediate children. Sorting done by {Wx::PG::PG_WINDOW_STYLES::PG_AUTO_SORT} option uses this.
@@ -810,6 +1040,7 @@ module Wx::PG
     
     # Sorts children of a property.
     # 
+    # 
     # @see Wx::PG::PropertyGridInterface#sort
     # @see  Wx::PG::PropertyGrid#set_sort_function 
     # @param id [String,Wx::PG::PGProperty]  Name or pointer to a property.
@@ -824,22 +1055,30 @@ module Wx::PG
     alias_method :property_by_name_a, :get_property_by_name_a
     
     # 
-    # This function reselects the property and may cause excess flicker, so to just call Refresh() on a rect of single property, call DrawItem() instead.
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>This function reselects the property and may cause excess flicker, so to just call Refresh() on a rect of single property, call DrawItem() instead. 
+    # </p>
+    # </div>
     # @param p [Wx::PG::PGProperty] 
     # @return [void]
     def refresh_property(p) end
     
     # Initializes all property types.
+    # 
     # Causes references to most object files in the library, so calling this may cause significant increase in executable size when linking with static library.
     # @return [void]
     def self.init_all_type_handlers; end
     
     # Initializes additional property editors (SpinCtrl etc.).
+    # 
     # Causes references to most object files in the library, so calling this may cause significant increase in executable size when linking with static library.
     # @return [void]
     def self.register_additional_editors; end
     
     # Sets strings listed in the choice dropdown of a {Wx::PG::BoolProperty}.
+    # 
     # Defaults are "True" and "False", so changing them to, say, "Yes" and "No" may be useful in some less technical applications.
     # @param trueChoice [String] 
     # @param falseChoice [String]